From 8d0e4fd405cc796a14f317257f11e3d12cbece2d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 27 Aug 2009 11:00:14 +0100 Subject: Staging: et131x: config is already zeroed Adapter was cleared by netdev allocation so any zero defaults do not need writing. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et131x_config.c | 75 ++++++++-------------------------- 1 file changed, 18 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/et131x/et131x_config.c b/drivers/staging/et131x/et131x_config.c index 358e6f69935..cde727d3180 100644 --- a/drivers/staging/et131x/et131x_config.c +++ b/drivers/staging/et131x/et131x_config.c @@ -101,58 +101,30 @@ extern dbg_info_t *et131x_dbginfo; #endif /* CONFIG_ET131X_DEBUG */ /* Defines for Parameter Default/Min/Max vaules */ -#define PARM_SPEED_DUPLEX_DEF 0 #define PARM_SPEED_DUPLEX_MIN 0 #define PARM_SPEED_DUPLEX_MAX 5 -#define PARM_FLOW_CTL_DEF 0 -#define PARM_FLOW_CTL_MIN 0 -#define PARM_FLOW_CTL_MAX 3 - -#define PARM_JUMBO_PKT_DEF 1514 -#define PARM_JUMBO_PKT_MIN 1514 -#define PARM_JUMBO_PKT_MAX 9216 - -#define PARM_PHY_COMA_DEF 0 -#define PARM_PHY_COMA_MIN 0 -#define PARM_PHY_COMA_MAX 1 - -#define PARM_SC_GAIN_DEF 7 -#define PARM_SC_GAIN_MIN 0 -#define PARM_SC_GAIN_MAX 7 - -#define PARM_PM_WOL_DEF 0 -#define PARM_PM_WOL_MIN 0 -#define PARM_PM_WOL_MAX 1 - -#define PARM_NMI_DISABLE_DEF 0 -#define PARM_NMI_DISABLE_MIN 0 -#define PARM_NMI_DISABLE_MAX 2 - - - /* Module parameter for disabling NMI - * et131x_speed_set : + * et131x_nmi_disable : + * Disable NMI (0-2) [0] + * 0 : + * 1 : + * 2 : + */ +static u32 et131x_nmi_disable; /* 0-2 */ +module_param(et131x_nmi_disable, uint, 0); +MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); + +/* Module parameter for manual speed setting * Set Link speed and dublex manually (0-5) [0] * 1 : 10Mb Half-Duplex * 2 : 10Mb Full-Duplex * 3 : 100Mb Half-Duplex * 4 : 100Mb Full-Duplex * 5 : 1000Mb Full-Duplex - * 0 : Auto Speed Auto Dublex // default - */ -static u32 et131x_nmi_disable = PARM_NMI_DISABLE_DEF; -module_param(et131x_nmi_disable, uint, 0); -MODULE_PARM_DESC(et131x_nmi_disable, "Disable NMI (0-2) [0]"); - -/* Module parameter for manual speed setting - * et131x_nmi_disable : - * Disable NMI (0-2) [0] - * 0 : - * 1 : - * 2 : + * 0 : Auto Speed Auto Duplex // default */ -static u32 et131x_speed_set = PARM_SPEED_DUPLEX_DEF; +static u32 et131x_speed_set; module_param(et131x_speed_set, uint, 0); MODULE_PARM_DESC(et131x_speed_set, "Set Link speed and dublex manually (0-5) [0] \n 1 : 10Mb Half-Duplex \n 2 : 10Mb Full-Duplex \n 3 : 100Mb Half-Duplex \n 4 : 100Mb Full-Duplex \n 5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex"); @@ -175,33 +147,22 @@ void et131x_config_parse(struct et131x_adapter *etdev) DBG_ENTER(et131x_dbginfo); - etdev->SpeedDuplex = et131x_speed_set; - if (et131x_speed_set < PARM_SPEED_DUPLEX_MIN || et131x_speed_set > PARM_SPEED_DUPLEX_MAX) { dev_warn(&etdev->pdev->dev, "invalid speed setting ignored.\n"); - et131x_speed_set = PARM_SPEED_DUPLEX_DEF; + et131x_speed_set = 0; } - else if (et131x_speed_set != PARM_SPEED_DUPLEX_DEF) + else if (et131x_speed_set) DBG_VERBOSE(et131x_dbginfo, "Speed set manually to : %d \n", et131x_speed_set); - /* etdev->SpeedDuplex = PARM_SPEED_DUPLEX_DEF; */ - - etdev->RegistryFlowControl = PARM_FLOW_CTL_DEF; - etdev->RegistryJumboPacket = PARM_JUMBO_PKT_DEF; - etdev->RegistryPhyComa = PARM_PHY_COMA_DEF; - - if (et131x_nmi_disable != PARM_NMI_DISABLE_DEF) - etdev->RegistryNMIDisable = et131x_nmi_disable; - else - etdev->RegistryNMIDisable = PARM_NMI_DISABLE_DEF; + etdev->SpeedDuplex = et131x_speed_set; + etdev->RegistryJumboPacket = 1514; /* 1514-9216 */ - etdev->RegistryPhyLoopbk = 0; /* 0 off 1 on */ + etdev->RegistryNMIDisable = et131x_nmi_disable; /* Set the MAC address to a default */ memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN); - etdev->bOverrideAddress = false; /* Decode SpeedDuplex * -- cgit v1.2.3-70-g09d2