From 8e647a279ca30029f19eca646de08a6338eab924 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 22 Aug 2010 10:54:23 +0100 Subject: drm/i915: Tightly scope intel_encoder to prevent invalid use We reset intel_encoder for every matching encoder whilst iterating over the encoders attached to this crtc when changing mode. As such in a cloned configuration intel_encoder may not correspond to the correct is_edp encoder. By scoping intel_encoder to the loop, not only is the compiler able to spot this mistake, we also improve readiability for ourselves. [It might not be a mistake, within this function it is unclear as to whether it is permissable for eDP to be cloned...] Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 83c85450608..0b90443f1eb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3508,10 +3508,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; - bool is_edp = false; + struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_encoder *encoder; - struct intel_encoder *intel_encoder = NULL; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; @@ -3532,12 +3531,12 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, drm_vblank_pre_modeset(dev, pipe); list_for_each_entry(encoder, &mode_config->encoder_list, head) { + struct intel_encoder *intel_encoder; - if (!encoder || encoder->crtc != crtc) + if (encoder->crtc != crtc) continue; intel_encoder = enc_to_intel_encoder(encoder); - switch (intel_encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; @@ -3561,7 +3560,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, is_dp = true; break; case INTEL_OUTPUT_EDP: - is_edp = true; + has_edp_encoder = intel_encoder; break; } @@ -3639,10 +3638,10 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, int lane = 0, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ - if (is_edp) { + if (has_edp_encoder) { target_clock = mode->clock; - intel_edp_link_config(intel_encoder, - &lane, &link_bw); + intel_edp_link_config(has_edp_encoder, + &lane, &link_bw); } else { /* DP over FDI requires target mode clock instead of link clock */ @@ -3663,7 +3662,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, temp |= PIPE_8BPC; else temp |= PIPE_6BPC; - } else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) { + } else if (has_edp_encoder || (is_dp && intel_pch_has_edp(crtc))) { switch (dev_priv->edp_bpp/3) { case 8: temp |= PIPE_8BPC; @@ -3736,7 +3735,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, udelay(200); - if (is_edp) { + if (has_edp_encoder) { if (dev_priv->lvds_use_ssc) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); @@ -3885,7 +3884,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, dpll_reg = pch_dpll_reg; } - if (!is_edp) { + if (!has_edp_encoder) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE); I915_READ(dpll_reg); @@ -3980,7 +3979,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } } - if (!is_edp) { + if (!has_edp_encoder) { I915_WRITE(fp_reg, fp); I915_WRITE(dpll_reg, dpll); I915_READ(dpll_reg); @@ -4059,7 +4058,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(link_m1_reg, m_n.link_m); I915_WRITE(link_n1_reg, m_n.link_n); - if (is_edp) { + if (has_edp_encoder) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); } else { /* enable FDI RX PLL too */ -- cgit v1.2.3-70-g09d2