From 8ff44985c761ad6697a3c97e7b14cf5362ff3801 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 9 Sep 2009 16:01:30 +0000 Subject: phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs According to specs, when auto-negotiation is disabled, Marvell PHYs need a software reset after changing speed/duplex forcing bits. Otherwise, the modified bits have no effect. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index dd6f54d1b49..6f69b9ba0df 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -155,8 +155,27 @@ static int marvell_config_aneg(struct phy_device *phydev) return err; err = genphy_config_aneg(phydev); + if (err < 0) + return err; - return err; + if (phydev->autoneg != AUTONEG_ENABLE) { + int bmcr; + + /* + * A write to speed/duplex bits (that is performed by + * genphy_config_aneg() call above) must be followed by + * a software reset. Otherwise, the write has no effect. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); + if (err < 0) + return err; + } + + return 0; } static int m88e1121_config_aneg(struct phy_device *phydev) -- cgit v1.2.3-70-g09d2