From 437052516779fea608261a50682b124315f48f01 Mon Sep 17 00:00:00 2001 From: "inaky@linux.intel.com" Date: Wed, 11 Oct 2006 20:05:58 -0700 Subject: usb/hub: allow hubs up to 31 children Current Wireless USB host hardware (Intel i1480 for example) allows up to 22 devices to connect, thus bringing up the max number of children in the WUSB Host Controller to 22 'fake' ports. Upcoming hardware might raise that limit. Makes almost no difference to go to 31, as the bit arrays are byte-aligned (plus an extra bit in general), so 22 bits fit in 4 bytes as 31 do. As well, the only other array that depends on USB_MAXCHILDREN is 'struct usb_hub->indicator'. By declaring it 'u8' instead of 'enum hub_led_mode', we reduce the size of each entry from 4 bytes (in i386) to 1, which will add as we when are doubling USB_MAXCHILDREN (with 16 the size of that array is 64 bytes, with 31 would be 128; by using u8 that goes down to 31 bytes). Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 0f8e82a4d48..1b05994de4d 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -229,7 +229,7 @@ struct usb_hub { unsigned resume_root_hub:1; unsigned has_indicators:1; - enum hub_led_mode indicator[USB_MAXCHILDREN]; + u8 indicator[USB_MAXCHILDREN]; struct work_struct leds; }; -- cgit v1.2.3-70-g09d2 From 88fafff9d73c0a506c0b08e7cd637c89d8b604e1 Mon Sep 17 00:00:00 2001 From: "inaky@linux.intel.com" Date: Wed, 11 Oct 2006 20:05:59 -0700 Subject: usb hub: fix root hub code so it takes more than 15 devices per root hub Wireless USB Host Controllers accept a large number of devices per host, which shows up as a large number of ports in its root hub. When the number of ports in a hub device goes over 16, the activation of the hub fails with the cryptic message in klogd. hub 2-0:1.0: activate --> -22 Following this further, it was seen that: hub_probe() hub_configure() generates pipe number pseudo allocates buffer 'maxp' bytes in size using usb_maxpacket() The endpoint descriptor for a root hub interrupt endpoint is declared in drivers/usb/core/hcd.c:hs_rh_config_descriptor and declares it to be size two (supporting 15 devices max). hub_activate() usb_hcd_submit_urb() rh_urb_enqueue() urb->pipe is neither int nor ctl, so it errors out rh_queue_status() Returns -EINVAL because the buffer length is smaller than the minimum needed to report all the hub port bits as in accordance with USB2.0[11.12.3]. There has to be trunc((PORTS + 1 + 7) / 8) bytes of space at least. Alan Stern confirmed that the reason for reading maxpktsize and not the right amount is because some hubs are known to return more data and thus cause overflow. So this patch simply changes the code to make the interrupt endpoint's max packet size be at least the minimum required by USB_MAXCHILDREN (instead of a fixed magic number) and add documentation for that. This way we are always ahead of the limit. Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 4 +++- drivers/usb/core/hub.c | 7 ++++++- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index afa2dd20332..10064af65d1 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -256,7 +256,9 @@ static const u8 hs_rh_config_descriptor [] = { 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ + /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) + * see hub.c:hub_configure() for details. */ + (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ }; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index ba165aff9ea..c91745def9e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -759,7 +759,12 @@ static int hub_configure(struct usb_hub *hub, dev_dbg(hub_dev, "%sover-current condition exists\n", (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no "); - /* set up the interrupt endpoint */ + /* set up the interrupt endpoint + * We use the EP's maxpacket size instead of (PORTS+1+7)/8 + * bytes as USB2.0[11.12.3] says because some hubs are known + * to send more data (and thus cause overflow). For root hubs, + * maxpktsize is defined in hcd.c's fake endpoint descriptors + * to be big enough for at least USB_MAXCHILDREN ports. */ pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe)); -- cgit v1.2.3-70-g09d2 From 6d8fc4d28deaf828606c19fb743fbe94aeab4caf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Oct 2006 12:35:24 -0400 Subject: USB HID: Handle STALL on interrupt endpoint The USB HID driver doesn't include any code to handle a STALL on the interrupt endpoint. While this may be uncommon, it does happen sometimes. This patch (as805) adds a fix. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 39 ++++++++++++++++++++++++++------------- drivers/usb/input/hid.h | 1 + 2 files changed, 27 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 6d08a3bcc95..5de931cf4cf 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -968,20 +968,29 @@ static void hid_retry_timeout(unsigned long _hid) hid_io_error(hid); } -/* Workqueue routine to reset the device */ +/* Workqueue routine to reset the device or clear a halt */ static void hid_reset(void *_hid) { struct hid_device *hid = (struct hid_device *) _hid; - int rc_lock, rc; - - dev_dbg(&hid->intf->dev, "resetting device\n"); - rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf); - if (rc_lock >= 0) { - rc = usb_reset_composite_device(hid->dev, hid->intf); - if (rc_lock) - usb_unlock_device(hid->dev); + int rc_lock, rc = 0; + + if (test_bit(HID_CLEAR_HALT, &hid->iofl)) { + dev_dbg(&hid->intf->dev, "clear halt\n"); + rc = usb_clear_halt(hid->dev, hid->urbin->pipe); + clear_bit(HID_CLEAR_HALT, &hid->iofl); + hid_start_in(hid); + } + + else if (test_bit(HID_RESET_PENDING, &hid->iofl)) { + dev_dbg(&hid->intf->dev, "resetting device\n"); + rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf); + if (rc_lock >= 0) { + rc = usb_reset_composite_device(hid->dev, hid->intf); + if (rc_lock) + usb_unlock_device(hid->dev); + } + clear_bit(HID_RESET_PENDING, &hid->iofl); } - clear_bit(HID_RESET_PENDING, &hid->iofl); switch (rc) { case 0: @@ -1023,9 +1032,8 @@ static void hid_io_error(struct hid_device *hid) /* Retries failed, so do a port reset */ if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) { - if (schedule_work(&hid->reset_work)) - goto done; - clear_bit(HID_RESET_PENDING, &hid->iofl); + schedule_work(&hid->reset_work); + goto done; } } @@ -1049,6 +1057,11 @@ static void hid_irq_in(struct urb *urb) hid->retry_delay = 0; hid_input_report(HID_INPUT_REPORT, urb, 1); break; + case -EPIPE: /* stall */ + clear_bit(HID_IN_RUNNING, &hid->iofl); + set_bit(HID_CLEAR_HALT, &hid->iofl); + schedule_work(&hid->reset_work); + return; case -ECONNRESET: /* unlink */ case -ENOENT: case -ESHUTDOWN: /* unplug */ diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index 0e76e6dcac3..2a9bf07944c 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -385,6 +385,7 @@ struct hid_control_fifo { #define HID_IN_RUNNING 3 #define HID_RESET_PENDING 4 #define HID_SUSPENDED 5 +#define HID_CLEAR_HALT 6 struct hid_input { struct list_head list; -- cgit v1.2.3-70-g09d2 From 93c8bf45e083b89dffe3a708363c15c1b220c723 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Oct 2006 16:41:51 -0400 Subject: USB core: don't match interface descriptors for vendor-specific devices This patch (as804) makes USB driver matching ignore the interface class, subclass, and protocol if the device class is Vendor Specific. Drivers can override this policy by specifying a Vendor ID as part of the match; then vendor-specific matches are allowed. Linus Walleij has reported a problem this patch fixes. When a particular mass-storage device is switched from mass-storage mode to Media Transfer Protocol, the interface class remains set to mass-storage and usb-storage binds to it erroneously, even though the device class changes to Vendor-Specific. This may cause a problem for some drivers until their match records can be updated to include Vendor IDs. But if it does, then those records were broken to begin with. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 113e484c763..401d76f1341 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -408,6 +408,16 @@ static int usb_match_one_id(struct usb_interface *interface, (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) return 0; + /* The interface class, subclass, and protocol should never be + * checked for a match if the device class is Vendor Specific, + * unless the match record specifies the Vendor ID. */ + if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC && + !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS | + USB_DEVICE_ID_MATCH_INT_PROTOCOL))) + return 0; + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && (id->bInterfaceClass != intf->desc.bInterfaceClass)) return 0; @@ -476,7 +486,17 @@ static int usb_match_one_id(struct usb_interface *interface, * most general; they let drivers bind to any interface on a * multiple-function device. Use the USB_INTERFACE_INFO * macro, or its siblings, to match class-per-interface style - * devices (as recorded in bDeviceClass). + * devices (as recorded in bInterfaceClass). + * + * Note that an entry created by USB_INTERFACE_INFO won't match + * any interface if the device class is set to Vendor-Specific. + * This is deliberate; according to the USB spec the meanings of + * the interface class/subclass/protocol for these devices are also + * vendor-specific, and hence matching against a standard product + * class wouldn't work anyway. If you really want to use an + * interface-based match for such a device, create a match record + * that also specifies the vendor ID. (Unforunately there isn't a + * standard macro for creating records like this.) * * Within those groups, remember that not all combinations are * meaningful. For example, don't give a product version range -- cgit v1.2.3-70-g09d2 From b1878440d46a0dc357ed5c9687c534e20955e940 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Oct 2006 12:02:31 -0400 Subject: USB: ohci-hcd: fix compiler warning This patch (as806) fixes a compiler warning when ohci-hcd is built with CONFIG_PM turned off. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 6995ea36f2e..99357b99d13 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -50,6 +50,10 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd) static void dl_done_list (struct ohci_hcd *); static void finish_unlinks (struct ohci_hcd *, u16); +#ifdef CONFIG_PM +static int ohci_restart(struct ohci_hcd *ohci); +#endif + static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop) __releases(ohci->lock) __acquires(ohci->lock) @@ -132,8 +136,6 @@ static inline struct ed *find_head (struct ed *ed) return ed; } -static int ohci_restart (struct ohci_hcd *ohci); - /* caller has locked the root hub */ static int ohci_rh_resume (struct ohci_hcd *ohci) __releases(ohci->lock) -- cgit v1.2.3-70-g09d2 From 052ac01aeb84d8427ba8ac3d70991ac01b009b59 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 27 Oct 2006 10:33:11 -0400 Subject: USB: OHCI: disable RHSC inside interrupt handler This patch (as808b) moves the Root Hub Status Change interrupt-disable code in ohci-hcd back into the interrupt handler proper, to avoid the chance of adverse interactions with mediocre hardware implementations. It also deletes the root-hub status timer from within the interrupt-enable routine. There's no need to poll for status any more once interrupts are re-enabled. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 10 ++++++++++ drivers/usb/host/ohci-hub.c | 24 ++++++++---------------- 2 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ea4714e557e..a95275a401b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -729,6 +729,16 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) ohci->next_statechange = jiffies + STATECHANGE_DELAY; ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, ®s->intrstatus); + + /* NOTE: Vendors didn't always make the same implementation + * choices for RHSC. Many followed the spec; RHSC triggers + * on an edge, like setting and maybe clearing a port status + * change bit. With others it's level-triggered, active + * until khubd clears all the port status change bits. We'll + * always disable it here and rely on polling until khubd + * re-enables it. + */ + ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); usb_hcd_poll_rh_status(hcd); } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 99357b99d13..1e5ed3bb1a9 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -41,7 +41,11 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); + spin_lock_irq(&ohci->lock); + if (!ohci->autostop) + del_timer(&hcd->rh_timer); /* Prevent next poll */ + ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); + spin_unlock_irq(&ohci->lock); } #define OHCI_SCHED_ENABLES \ @@ -348,7 +352,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); int i, changed = 0, length = 1; - int any_connected = 0, rhsc_enabled = 1; + int any_connected = 0; unsigned long flags; spin_lock_irqsave (&ohci->lock, flags); @@ -389,19 +393,6 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) } } - /* NOTE: vendors didn't always make the same implementation - * choices for RHSC. Sometimes it triggers on an edge (like - * setting and maybe clearing a port status change bit); and - * it's level-triggered on other silicon, active until khubd - * clears all active port status change bits. If it's still - * set (level-triggered) we must disable it and rely on - * polling until khubd re-enables it. - */ - if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) { - ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable); - (void) ohci_readl (ohci, &ohci->regs->intrdisable); - rhsc_enabled = 0; - } hcd->poll_rh = 1; /* carry out appropriate state changes */ @@ -412,7 +403,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) * and RHSC is enabled */ if (!ohci->autostop) { if (any_connected) { - if (rhsc_enabled) + if (ohci_readl(ohci, &ohci->regs->intrenable) & + OHCI_INTR_RHSC) hcd->poll_rh = 0; } else { ohci->autostop = 1; -- cgit v1.2.3-70-g09d2 From 5d7efe5b3768bf53df9b87380ea68baacf11f933 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Thu, 26 Oct 2006 21:06:24 +0200 Subject: USB: kmemdup() cleanup in drivers/usb/ replace open coded kmemdup() to save some screen space, and allow inlining/not inlining to be triggered by gcc. Signed-off-by: Eric Sesterhenn Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/ueagle-atm.c | 10 +++------- drivers/usb/misc/emi26.c | 3 +-- drivers/usb/misc/emi62.c | 3 +-- drivers/usb/serial/ezusb.c | 3 +-- drivers/usb/serial/ipw.c | 3 +-- 5 files changed, 7 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index f6b9f7e1f71..c137c041f7a 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -401,9 +401,8 @@ static int uea_send_modem_cmd(struct usb_device *usb, int ret = -ENOMEM; u8 *xfer_buff; - xfer_buff = kmalloc(size, GFP_KERNEL); + xfer_buff = kmemdup(buff, size, GFP_KERNEL); if (xfer_buff) { - memcpy(xfer_buff, buff, size); ret = usb_control_msg(usb, usb_sndctrlpipe(usb, 0), LOAD_INTERNAL, @@ -595,14 +594,12 @@ static int uea_idma_write(struct uea_softc *sc, void *data, u32 size) u8 *xfer_buff; int bytes_read; - xfer_buff = kmalloc(size, GFP_KERNEL); + xfer_buff = kmemdup(data, size, GFP_KERNEL); if (!xfer_buff) { uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); return ret; } - memcpy(xfer_buff, data, size); - ret = usb_bulk_msg(sc->usb_dev, usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE), xfer_buff, size, &bytes_read, BULK_TIMEOUT); @@ -765,12 +762,11 @@ static int uea_request(struct uea_softc *sc, u8 *xfer_buff; int ret = -ENOMEM; - xfer_buff = kmalloc(size, GFP_KERNEL); + xfer_buff = kmemdup(data, size, GFP_KERNEL); if (!xfer_buff) { uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); return ret; } - memcpy(xfer_buff, data, size); ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0), UCDC_SEND_ENCAPSULATED_COMMAND, diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index 1fd9cb85f4c..5c0a26cbd12 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -53,13 +53,12 @@ static void __exit emi26_exit (void); static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; - unsigned char *buffer = kmalloc (length, GFP_KERNEL); + unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { err("emi26: kmalloc(%d) failed.", length); return -ENOMEM; } - memcpy (buffer, data, length); /* Note: usb_control_msg returns negative value on error or length of the * data that was written! */ result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index fe351371f27..23153eac0df 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -61,13 +61,12 @@ static void __exit emi62_exit (void); static int emi62_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) { int result; - unsigned char *buffer = kmalloc (length, GFP_KERNEL); + unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); if (!buffer) { err("emi62: kmalloc(%d) failed.", length); return -ENOMEM; } - memcpy (buffer, data, length); /* Note: usb_control_msg returns negative value on error or length of the * data that was written! */ result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c index 5169c2d154a..97ee718b1da 100644 --- a/drivers/usb/serial/ezusb.c +++ b/drivers/usb/serial/ezusb.c @@ -31,12 +31,11 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da return -ENODEV; } - transfer_buffer = kmalloc (length, GFP_KERNEL); + transfer_buffer = kmemdup(data, length, GFP_KERNEL); if (!transfer_buffer) { dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length); return -ENOMEM; } - memcpy (transfer_buffer, data, length); result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000); kfree (transfer_buffer); return result; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2a4bb66691a..d3b9a351cef 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -206,10 +206,9 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp) dbg("%s", __FUNCTION__); - buf_flow_init = kmalloc(16, GFP_KERNEL); + buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); if (!buf_flow_init) return -ENOMEM; - memcpy(buf_flow_init, buf_flow_static, 16); if (port->tty) port->tty->low_latency = 1; -- cgit v1.2.3-70-g09d2 From 565402baee99096da4d79209e450fe42d379a0ca Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 27 Oct 2006 10:35:01 -0400 Subject: USB: OHCI: remove stale testing code from root-hub resume This patch (as811) removes some stale testing code from the root-hub resume routine in ohci-hcd. It also adds a spin_lock_irq() call that inadvertently got left out of an error pathway. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hub.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 1e5ed3bb1a9..dcf9eb60132 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -204,18 +204,6 @@ __acquires(ohci->lock) goto skip_resume; spin_unlock_irq (&ohci->lock); - temp = ohci->num_ports; - while (temp--) { - u32 stat = ohci_readl (ohci, - &ohci->regs->roothub.portstatus [temp]); - - /* force global, not selective, resume */ - if (!(stat & RH_PS_PSS)) - continue; - ohci_writel (ohci, RH_PS_POCI, - &ohci->regs->roothub.portstatus [temp]); - } - /* Some controllers (lucent erratum) need extra-long delays */ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); @@ -223,6 +211,7 @@ __acquires(ohci->lock) temp &= OHCI_CTRL_HCFS; if (temp != OHCI_USB_RESUME) { ohci_err (ohci, "controller won't resume\n"); + spin_lock_irq(&ohci->lock); return -EBUSY; } -- cgit v1.2.3-70-g09d2 From 377f13bf95b64cf5fb0fad0bf2b94106ad868562 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:45 -0300 Subject: USB: aircable: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/aircable.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 81227550913..8554c1a7b9f 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -305,9 +305,7 @@ static int aircable_probe(struct usb_serial *serial, for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & 0x80) == 0x00) && - ((endpoint->bmAttributes & 3) == 0x02)) { - /* we found our bulk out endpoint */ + if (usb_endpoint_is_bulk_out(endpoint)) { dbg("found bulk out on endpoint %d", i); ++num_bulk_out; } -- cgit v1.2.3-70-g09d2 From 16f96376174bfbcb1b40734f83f5701161a5e63b Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:46 -0300 Subject: USB: appledisplay: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 6b23a1def9f..ba30ca6a14a 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -216,10 +216,7 @@ static int appledisplay_probe(struct usb_interface *iface, iface_desc = iface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; - if (!int_in_endpointAddr && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT)) { + if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { /* we found an interrupt in endpoint */ int_in_endpointAddr = endpoint->bEndpointAddress; break; -- cgit v1.2.3-70-g09d2 From b333d5bfd7d3791f91c678f3f5033c82b1e2b46f Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:47 -0300 Subject: USB: cdc_ether: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/cdc_ether.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index f6971b88349..44a91547146 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -200,8 +200,7 @@ next_desc: dev->status = &info->control->cur_altsetting->endpoint [0]; desc = &dev->status->desc; - if (desc->bmAttributes != USB_ENDPOINT_XFER_INT - || !(desc->bEndpointAddress & USB_DIR_IN) + if (!usb_endpoint_is_int_in(desc) || (le16_to_cpu(desc->wMaxPacketSize) < sizeof(struct usb_cdc_notification)) || !desc->bInterval) { -- cgit v1.2.3-70-g09d2 From 45aea704d12d05f06b3f82974aa1438460f42398 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:48 -0300 Subject: USB: cdc-acm: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 9a9012fd284..ec3438dc8ee 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -892,7 +892,7 @@ skip_normal_probe: /* workaround for switched endpoints */ - if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) { + if (!usb_endpoint_dir_in(epread)) { /* descriptors are swapped */ struct usb_endpoint_descriptor *t; dev_dbg(&intf->dev,"The data interface has switched endpoints"); -- cgit v1.2.3-70-g09d2 From 87ad46c94ec74f1750764c12744410ed524f9900 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:49 -0300 Subject: USB: devices: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 3538c2fdadf..ea398e5d50a 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -175,12 +175,13 @@ static char *usb_dump_endpoint_descriptor ( ) { char dir, unit, *type; - unsigned interval, in, bandwidth = 1; + unsigned interval, bandwidth = 1; if (start > end) return start; - in = (desc->bEndpointAddress & USB_DIR_IN); - dir = in ? 'I' : 'O'; + + dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; + if (speed == USB_SPEED_HIGH) { switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) { case 1 << 11: bandwidth = 2; break; @@ -204,7 +205,7 @@ static char *usb_dump_endpoint_descriptor ( break; case USB_ENDPOINT_XFER_BULK: type = "Bulk"; - if (speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */ interval = desc->bInterval; else interval = 0; -- cgit v1.2.3-70-g09d2 From 2ae7745beac6de54a47ed19fe441f1d45aa96172 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:50 -0300 Subject: USB: ftdi-elan: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 9b591b8b936..0e8ee2dea88 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -2633,10 +2633,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; if (!ftdi->bulk_in_endpointAddr && - ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) && ((endpoint->bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) - { + usb_endpoint_is_bulk_in(endpoint)) { buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); ftdi->bulk_in_size = buffer_size; ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress; @@ -2649,10 +2646,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, } } if (!ftdi->bulk_out_endpointAddr && - ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_OUT) && ((endpoint->bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)) - { + usb_endpoint_is_bulk_out(endpoint)) { ftdi->bulk_out_endpointAddr = endpoint->bEndpointAddress; } -- cgit v1.2.3-70-g09d2 From 0f12aa03972e797129c79a236d2872f2ee5d25b6 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:51 -0300 Subject: USB: hid-core: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 5de931cf4cf..2c12b04da11 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1998,7 +1998,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0) interval = hid_mousepoll_interval; - if (endpoint->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(endpoint)) { if (hid->urbin) continue; if (!(hid->urbin = usb_alloc_urb(0, GFP_KERNEL))) -- cgit v1.2.3-70-g09d2 From a7dc218b8f61d58fcf27ee5650e340d7baff74c4 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:52 -0300 Subject: USB: idmouse: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/idmouse.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 8e6e195a22b..c5fee0033a8 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -350,11 +350,7 @@ static int idmouse_probe(struct usb_interface *interface, /* set up the endpoint information - use only the first bulk-in endpoint */ endpoint = &iface_desc->endpoint[0].desc; - if (!dev->bulk_in_endpointAddr - && (endpoint->bEndpointAddress & USB_DIR_IN) - && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK)) { - + if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* we found a bulk in endpoint */ dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize); dev->bulk_in_size = 0x200; /* works _much_ faster */ -- cgit v1.2.3-70-g09d2 From 4f1f1ddd73d04e8d41c010934d81122d1a632e4e Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:53 -0300 Subject: USB: kobil_sct: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kobil_sct.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index ff03331e0bc..8dd2afa2fca 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -185,13 +185,11 @@ static int kobil_startup (struct usb_serial *serial) for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { endpoint = &altsetting->endpoint[i]; - if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && - ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_out(&endpoint->desc)) { dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress; } - if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && - ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + if (usb_endpoint_is_int_in(&endpoint->desc)) { dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress); priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress; } -- cgit v1.2.3-70-g09d2 From 240661c55646401df64411e04ba5833c411c42bc Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:54 -0300 Subject: USB: legousbtower: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/legousbtower.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 27089497e71..f8611997bd7 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -898,14 +898,11 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - dev->interrupt_in_endpoint = endpoint; - } - - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { - dev->interrupt_out_endpoint = endpoint; + if (usb_endpoint_xfer_int(endpoint)) { + if (usb_endpoint_dir_in(endpoint)) + dev->interrupt_in_endpoint = endpoint; + else + dev->interrupt_out_endpoint = endpoint; } } if(dev->interrupt_in_endpoint == NULL) { -- cgit v1.2.3-70-g09d2 From 66722a194ef96a09ac12d0fe2f9e206f86c29c9f Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:55 -0300 Subject: USB: onetouch: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/onetouch.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 3baf448e300..3a158d58441 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -142,10 +142,7 @@ int onetouch_connect_input(struct us_data *ss) return -ENODEV; endpoint = &interface->endpoint[2].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -ENODEV; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - != USB_ENDPOINT_XFER_INT) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); -- cgit v1.2.3-70-g09d2 From 8419404949488bba4504005c0d1180fb07bef740 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:56 -0300 Subject: USB: phidgetkit: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/phidgetkit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index abb4dcd811a..0dc0d034cc9 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -551,7 +551,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!usb_endpoint_dir_in(endpoint)) return -ENODEV; /* * bmAttributes -- cgit v1.2.3-70-g09d2 From a742e5a7fc5b179e2482b85e875fc99192cead74 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:57 -0300 Subject: USB: phidgetmotorcontrol: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/phidgetmotorcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c index 5c780cab92e..7702a4f7b08 100644 --- a/drivers/usb/misc/phidgetmotorcontrol.c +++ b/drivers/usb/misc/phidgetmotorcontrol.c @@ -323,7 +323,7 @@ static int motorcontrol_probe(struct usb_interface *intf, const struct usb_devic return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & 0x80)) + if (!usb_endpoint_dir_in(endpoint)) return -ENODEV; /* -- cgit v1.2.3-70-g09d2 From c5dd1f94246acdf6be6796db47efba8b2a93f93e Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:58 -0300 Subject: USB: speedtch: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/speedtch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index c870c804470..a823486495c 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -834,8 +834,8 @@ static int speedtch_bind(struct usbatm_data *usbatm, const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; if ((endpoint_desc->bEndpointAddress == target_address)) { - use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC; + use_isoc = + usb_endpoint_xfer_isoc(endpoint_desc); break; } } -- cgit v1.2.3-70-g09d2 From a20c314412b9e9e029a73dbb4dd951e36499eb58 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:02:59 -0300 Subject: USB: usbkbd: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/usbkbd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index c73285cf855..b6c2ba7e05a 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -236,9 +236,7 @@ static int usb_kbd_probe(struct usb_interface *iface, return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -ENODEV; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); -- cgit v1.2.3-70-g09d2 From 30f36ef922201cd085a598a6274ee18a360635ea Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:03:00 -0300 Subject: USB: usbmouse: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/usbmouse.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index cbbbea332ed..68a55642c08 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -126,9 +126,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i return -ENODEV; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -ENODEV; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) + if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); -- cgit v1.2.3-70-g09d2 From fc6e2544bdb1e7cb9f7ccbb16c268d61743b123c Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:03:01 -0300 Subject: USB: usbnet: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/usbnet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 760b5327b81..7672e11c94c 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -116,7 +116,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) e = alt->endpoint + ep; switch (e->desc.bmAttributes) { case USB_ENDPOINT_XFER_INT: - if (!(e->desc.bEndpointAddress & USB_DIR_IN)) + if (!usb_endpoint_dir_in(&e->desc)) continue; intr = 1; /* FALLTHROUGH */ @@ -125,7 +125,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) default: continue; } - if (e->desc.bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(&e->desc)) { if (!intr && !in) in = e; else if (intr && !status) -- cgit v1.2.3-70-g09d2 From 4d823dd21d81c29a83a4672ac92e449fc5fa5cca Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:03:02 -0300 Subject: USB: usbtest: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 7c2cbdf81d2..194065dbb51 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -138,7 +138,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf) default: continue; } - if (e->desc.bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(&e->desc)) { if (!in) in = e; } else { @@ -147,7 +147,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf) } continue; try_iso: - if (e->desc.bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(&e->desc)) { if (!iso_in) iso_in = e; } else { -- cgit v1.2.3-70-g09d2 From 0472074748444529188c77f62f0714f9ff7d7556 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:03:03 -0300 Subject: USB: storage: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index b8d6031b097..b401084b3d2 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -740,18 +740,16 @@ static int get_pipes(struct us_data *us) ep = &altsetting->endpoint[i].desc; /* Is it a BULK endpoint? */ - if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK) { + if (usb_endpoint_xfer_bulk(ep)) { /* BULK in or out? */ - if (ep->bEndpointAddress & USB_DIR_IN) + if (usb_endpoint_dir_in(ep)) ep_in = ep; else ep_out = ep; } /* Is it an interrupt endpoint? */ - else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT) { + else if (usb_endpoint_xfer_int(ep)) { ep_int = ep; } } -- cgit v1.2.3-70-g09d2 From 6f7cd44162ca1bffd54f4090e67b9810bacb5d25 Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Thu, 26 Oct 2006 13:03:04 -0300 Subject: USB: yealink: Use usb_endpoint_* functions Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/yealink.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 905bf639825..2268ca311ad 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -859,10 +859,8 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; - if (!(endpoint->bEndpointAddress & USB_DIR_IN)) - return -EIO; - if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) - return -EIO; + if (!usb_endpoint_is_int_in(endpoint)) + return -ENODEV; yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL); if (!yld) -- cgit v1.2.3-70-g09d2 From 0c1ac4f25f894f9df0ffe9b912c165fb6a185a3c Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Mon, 30 Oct 2006 14:53:03 -0300 Subject: USB: makes usb_endpoint_* functions inline. We have no benefits of having the usb_endpoint_* functions as functions, but making them inline saves text and data segment sizes: text data bss dec hex filename 14893634 3108770 1108840 19111244 1239d4c vmlinux.func 14893185 3108566 1108840 19110591 1239abf vmlinux.inline This is the result of a 2.6.19-rc3 kernel compiled with GCC 4.1.1 without CONFIG_MODULES, CONFIG_CC_OPTIMIZE_FOR_SIZE, CONFIG_REGPARM options set. USB support is fully enabled (while most of the other drivers are not), and that kernel has most of the USB code ported to use the endpoint functions. That happens because a call to those functions are expensive (in terms of bytes), while the function's size is smaller or have the same 'size' of the call. Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 144 ------------------------------------------------- include/linux/usb.h | 142 ++++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 131 insertions(+), 155 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 467cb02832f..a83c2d5065c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -537,138 +537,6 @@ int usb_get_current_frame_number(struct usb_device *dev) return usb_hcd_get_frame_number (dev); } -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); -} - /*-------------------------------------------------------------------*/ /* * __usb_get_extra_descriptor() finds a descriptor of specific type in the @@ -1102,18 +970,6 @@ EXPORT_SYMBOL(__usb_get_extra_descriptor); EXPORT_SYMBOL(usb_find_device); EXPORT_SYMBOL(usb_get_current_frame_number); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_in); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_out); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out); - EXPORT_SYMBOL (usb_buffer_alloc); EXPORT_SYMBOL (usb_buffer_free); diff --git a/include/linux/usb.h b/include/linux/usb.h index e5cb1690975..e732e024a14 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -495,17 +495,137 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, /*-------------------------------------------------------------------------*/ -extern int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd); +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); +} /*-------------------------------------------------------------------------*/ -- cgit v1.2.3-70-g09d2 From af4f76066d0fcb215ae389b8839d7ae37ce0e28b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 30 Oct 2006 17:06:45 -0500 Subject: USB: autosuspend code consolidation This patch (as813) gathers together common code for USB interface autosuspend/autoresume. It also adds some simple checking at the time an autosuspend request is made, to see whether the request will fail. This way we don't add a workqueue entry when it would end up doing nothing. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 112 +++++++++++++++++++++++++++------------------- 1 file changed, 67 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 401d76f1341..ca0e40ed2b7 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -940,6 +940,36 @@ done: return status; } +/* Internal routine to check whether we may autosuspend a device. */ +static int autosuspend_check(struct usb_device *udev) +{ + int i; + struct usb_interface *intf; + + /* For autosuspend, fail fast if anything is in use. + * Also fail if any interfaces require remote wakeup but it + * isn't available. */ + udev->do_remote_wakeup = device_may_wakeup(&udev->dev); + if (udev->pm_usage_cnt > 0) + return -EBUSY; + if (udev->actconfig) { + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + if (!is_active(intf)) + continue; + if (intf->pm_usage_cnt > 0) + return -EBUSY; + if (intf->needs_remote_wakeup && + !udev->do_remote_wakeup) { + dev_dbg(&udev->dev, "remote wakeup needed " + "for autosuspend\n"); + return -EOPNOTSUPP; + } + } + } + return 0; +} + /** * usb_suspend_both - suspend a USB device and its interfaces * @udev: the usb_device to suspend @@ -991,28 +1021,10 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) udev->do_remote_wakeup = device_may_wakeup(&udev->dev); - /* For autosuspend, fail fast if anything is in use. - * Also fail if any interfaces require remote wakeup but it - * isn't available. */ if (udev->auto_pm) { - if (udev->pm_usage_cnt > 0) - return -EBUSY; - if (udev->actconfig) { - for (; i < udev->actconfig->desc.bNumInterfaces; i++) { - intf = udev->actconfig->interface[i]; - if (!is_active(intf)) - continue; - if (intf->pm_usage_cnt > 0) - return -EBUSY; - if (intf->needs_remote_wakeup && - !udev->do_remote_wakeup) { - dev_dbg(&udev->dev, - "remote wakeup needed for autosuspend\n"); - return -EOPNOTSUPP; - } - } - i = 0; - } + status = autosuspend_check(udev); + if (status < 0) + return status; } /* Suspend all the interfaces and then udev itself */ @@ -1151,7 +1163,7 @@ void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) { usb_pm_lock(udev); udev->pm_usage_cnt -= dec_usage_cnt; - if (udev->pm_usage_cnt <= 0) + if (autosuspend_check(udev) == 0) queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, USB_AUTOSUSPEND_DELAY); usb_pm_unlock(udev); @@ -1200,6 +1212,33 @@ int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) return status; } +/* Internal routine to adjust an interface's usage counter and change + * its device's autosuspend state. + */ +static int usb_autopm_do_interface(struct usb_interface *intf, + int inc_usage_cnt) +{ + struct usb_device *udev = interface_to_usbdev(intf); + int status = 0; + + usb_pm_lock(udev); + if (intf->condition == USB_INTERFACE_UNBOUND) + status = -ENODEV; + else { + intf->pm_usage_cnt += inc_usage_cnt; + if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + intf->pm_usage_cnt -= inc_usage_cnt; + } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + } + usb_pm_unlock(udev); + return status; +} + /** * usb_autopm_put_interface - decrement a USB interface's PM-usage counter * @intf: the usb_interface whose counter should be decremented @@ -1233,17 +1272,11 @@ int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) */ void usb_autopm_put_interface(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); + int status; - usb_pm_lock(udev); - if (intf->condition != USB_INTERFACE_UNBOUND && - --intf->pm_usage_cnt <= 0) { - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); - } - usb_pm_unlock(udev); - // dev_dbg(&intf->dev, "%s: cnt %d\n", - // __FUNCTION__, intf->pm_usage_cnt); + status = usb_autopm_do_interface(intf, -1); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); } EXPORT_SYMBOL_GPL(usb_autopm_put_interface); @@ -1280,20 +1313,9 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); */ int usb_autopm_get_interface(struct usb_interface *intf) { - struct usb_device *udev = interface_to_usbdev(intf); - int status; + int status; - usb_pm_lock(udev); - if (intf->condition == USB_INTERFACE_UNBOUND) - status = -ENODEV; - else { - ++intf->pm_usage_cnt; - udev->auto_pm = 1; - status = usb_resume_both(udev); - if (status != 0) - --intf->pm_usage_cnt; - } - usb_pm_unlock(udev); + status = usb_autopm_do_interface(intf, 1); // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", // __FUNCTION__, status, intf->pm_usage_cnt); return status; -- cgit v1.2.3-70-g09d2 From 692a186c9d5f12d43cef28d40c25247dc4f302f0 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 30 Oct 2006 17:07:51 -0500 Subject: USB: expand autosuspend/autoresume API This patch (as814) adds usb_autopm_set_interface() to the autosuspend API. It also provides convenient wrapper routines, usb_autopm_enable() and usb_autopm_disable(), for drivers that want to specify directly whether autosuspend should be allowed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 22 ++++++++++++++++++++++ include/linux/usb.h | 29 ++++++++++++++++++++++++++--- 2 files changed, 48 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ca0e40ed2b7..204495fa6b3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1322,6 +1322,28 @@ int usb_autopm_get_interface(struct usb_interface *intf) } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); +/** + * usb_autopm_set_interface - set a USB interface's autosuspend state + * @intf: the usb_interface whose state should be set + * + * This routine sets the autosuspend state of @intf's device according + * to @intf's usage counter, which the caller must have set previously. + * If the counter is <= 0, the device is autosuspended (if it isn't + * already suspended and if nothing else prevents the autosuspend). If + * the counter is > 0, the device is autoresumed (if it isn't already + * awake). + */ +int usb_autopm_set_interface(struct usb_interface *intf) +{ + int status; + + status = usb_autopm_do_interface(intf, 0); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_set_interface); + #endif /* CONFIG_USB_SUSPEND */ static int usb_suspend(struct device *dev, pm_message_t message) diff --git a/include/linux/usb.h b/include/linux/usb.h index e732e024a14..864c6c21c21 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -415,14 +415,37 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); /* USB autosuspend and autoresume */ #ifdef CONFIG_USB_SUSPEND +extern int usb_autopm_set_interface(struct usb_interface *intf); extern int usb_autopm_get_interface(struct usb_interface *intf); extern void usb_autopm_put_interface(struct usb_interface *intf); +static inline void usb_autopm_enable(struct usb_interface *intf) +{ + intf->pm_usage_cnt = 0; + usb_autopm_set_interface(intf); +} + +static inline void usb_autopm_disable(struct usb_interface *intf) +{ + intf->pm_usage_cnt = 1; + usb_autopm_set_interface(intf); +} + #else -#define usb_autopm_get_interface(intf) 0 -#define usb_autopm_put_interface(intf) do {} while (0) -#endif +static inline int usb_autopm_set_interface(struct usb_interface *intf) +{ return 0; } + +static inline int usb_autopm_get_interface(struct usb_interface *intf) +{ return 0; } + +static inline void usb_autopm_put_interface(struct usb_interface *intf) +{ } +static inline void usb_autopm_enable(struct usb_interface *intf) +{ } +static inline void usb_autopm_disable(struct usb_interface *intf) +{ } +#endif /*-------------------------------------------------------------------------*/ -- cgit v1.2.3-70-g09d2 From b4ee4a2309c9f811457ce44962eed753e451dc11 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 9 Nov 2006 22:02:37 +0100 Subject: USB: net1080: Fix && typos Fix STATUS_PACKETS_* macros, where "&&" was mistakenly used where "&" should have. Signed-off-by: Jean Delvare Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/net1080.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index ce00de8f13a..a77410562e1 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -237,12 +237,12 @@ static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl) #define STATUS_CONN_OTHER (1 << 14) #define STATUS_SUSPEND_OTHER (1 << 13) #define STATUS_MAILBOX_OTHER (1 << 12) -#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03) +#define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03) #define STATUS_CONN_THIS (1 << 6) #define STATUS_SUSPEND_THIS (1 << 5) #define STATUS_MAILBOX_THIS (1 << 4) -#define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03) +#define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03) #define STATUS_UNSPEC_MASK 0x0c8c #define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK)) -- cgit v1.2.3-70-g09d2 From 1bb5f66bb3b6c2fd7eec1cdfee9cf3f68ef83487 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 6 Nov 2006 11:56:13 -0500 Subject: USB: Move private hub declarations out of public header file This patch (as809b) moves the declaration of the hub driver's private data structure from hub.h into the hub.c source file. Lots of other files import hub.h; they have no need to know about the details of the hub driver's private data. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 42 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/hub.h | 41 ----------------------------------------- 2 files changed, 42 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c91745def9e..c961a32f317 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -31,6 +31,48 @@ #include "hcd.h" #include "hub.h" +struct usb_hub { + struct device *intfdev; /* the "interface" device */ + struct usb_device *hdev; + struct urb *urb; /* for interrupt polling pipe */ + + /* buffer for urb ... with extra space in case of babble */ + char (*buffer)[8]; + dma_addr_t buffer_dma; /* DMA address for buffer */ + union { + struct usb_hub_status hub; + struct usb_port_status port; + } *status; /* buffer for status reports */ + + int error; /* last reported error */ + int nerrors; /* track consecutive errors */ + + struct list_head event_list; /* hubs w/data or errs ready */ + unsigned long event_bits[1]; /* status change bitmask */ + unsigned long change_bits[1]; /* ports with logical connect + status change */ + unsigned long busy_bits[1]; /* ports being reset or + resumed */ +#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ +#error event_bits[] is too short! +#endif + + struct usb_hub_descriptor *descriptor; /* class descriptor */ + struct usb_tt tt; /* Transaction Translator */ + + unsigned mA_per_port; /* current for each child */ + + unsigned limited_power:1; + unsigned quiescing:1; + unsigned activating:1; + unsigned resume_root_hub:1; + + unsigned has_indicators:1; + u8 indicator[USB_MAXCHILDREN]; + struct work_struct leds; +}; + + /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 1b05994de4d..cf9559c6c9b 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -192,45 +192,4 @@ struct usb_tt_clear { extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe); -struct usb_hub { - struct device *intfdev; /* the "interface" device */ - struct usb_device *hdev; - struct urb *urb; /* for interrupt polling pipe */ - - /* buffer for urb ... with extra space in case of babble */ - char (*buffer)[8]; - dma_addr_t buffer_dma; /* DMA address for buffer */ - union { - struct usb_hub_status hub; - struct usb_port_status port; - } *status; /* buffer for status reports */ - - int error; /* last reported error */ - int nerrors; /* track consecutive errors */ - - struct list_head event_list; /* hubs w/data or errs ready */ - unsigned long event_bits[1]; /* status change bitmask */ - unsigned long change_bits[1]; /* ports with logical connect - status change */ - unsigned long busy_bits[1]; /* ports being reset or - resumed */ -#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ -#error event_bits[] is too short! -#endif - - struct usb_hub_descriptor *descriptor; /* class descriptor */ - struct usb_tt tt; /* Transaction Translator */ - - unsigned mA_per_port; /* current for each child */ - - unsigned limited_power:1; - unsigned quiescing:1; - unsigned activating:1; - unsigned resume_root_hub:1; - - unsigned has_indicators:1; - u8 indicator[USB_MAXCHILDREN]; - struct work_struct leds; -}; - #endif /* __LINUX_HUB_H */ -- cgit v1.2.3-70-g09d2 From d8126a0c23b95d8f49a8f4b49191691f9a09ae4a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 12 Nov 2006 18:09:44 -0800 Subject: usb/gadget/ether.c minor manycast tweaks Minor cleanup/clarification in the ethernet gadget driver, using standard calls to test for Ethernet multicast and broadcast addresses. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ether.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 1c17d26d03b..3bd1dfe565c 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1894,13 +1894,13 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) if (!eth_is_promisc (dev)) { u8 *dest = skb->data; - if (dest [0] & 0x01) { + if (is_multicast_ether_addr(dest)) { u16 type; /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host * SET_ETHERNET_MULTICAST_FILTERS requests */ - if (memcmp (dest, net->broadcast, ETH_ALEN) == 0) + if (is_broadcast_ether_addr(dest)) type = USB_CDC_PACKET_TYPE_BROADCAST; else type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; -- cgit v1.2.3-70-g09d2 From d5ec1686ba96eb75e132196c486cc0521b00f12c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 14 Nov 2006 10:06:17 -0800 Subject: USB: resume_device symbol conflict Several functions in USB core overlap with global functions. The linker appears to do the right thing, but it is bad practice and makes debugging harder. Signed-off-by: Stephen Hemminger Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 204495fa6b3..44dd6103fb4 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -810,7 +810,7 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_deregister); #ifdef CONFIG_PM /* Caller has locked udev's pm_mutex */ -static int suspend_device(struct usb_device *udev, pm_message_t msg) +static int usb_suspend_device(struct usb_device *udev, pm_message_t msg) { struct usb_device_driver *udriver; int status = 0; @@ -837,7 +837,7 @@ done: } /* Caller has locked udev's pm_mutex */ -static int resume_device(struct usb_device *udev) +static int usb_resume_device(struct usb_device *udev) { struct usb_device_driver *udriver; int status = 0; @@ -863,7 +863,7 @@ done: } /* Caller has locked intf's usb_device's pm mutex */ -static int suspend_interface(struct usb_interface *intf, pm_message_t msg) +static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) { struct usb_driver *driver; int status = 0; @@ -900,7 +900,7 @@ done: } /* Caller has locked intf's usb_device's pm_mutex */ -static int resume_interface(struct usb_interface *intf) +static int usb_resume_interface(struct usb_interface *intf) { struct usb_driver *driver; int status = 0; @@ -1031,19 +1031,19 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (udev->actconfig) { for (; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - status = suspend_interface(intf, msg); + status = usb_suspend_interface(intf, msg); if (status != 0) break; } } if (status == 0) - status = suspend_device(udev, msg); + status = usb_suspend_device(udev, msg); /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { while (--i >= 0) { intf = udev->actconfig->interface[i]; - resume_interface(intf); + usb_resume_interface(intf); } /* If the suspend succeeded, propagate it up the tree */ @@ -1109,14 +1109,14 @@ int usb_resume_both(struct usb_device *udev) status = -EHOSTUNREACH; } if (status == 0) - status = resume_device(udev); + status = usb_resume_device(udev); if (parent) usb_pm_unlock(parent); } else { /* Needed only for setting udev->dev.power.power_state.event * and for possible debugging message. */ - status = resume_device(udev); + status = usb_resume_device(udev); } /* Now the parent won't suspend until we are finished */ @@ -1124,7 +1124,7 @@ int usb_resume_both(struct usb_device *udev) if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - resume_interface(intf); + usb_resume_interface(intf); } } -- cgit v1.2.3-70-g09d2 From 54c9b2266f83dfc3d6c538417564dc74266f4dd9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 20 Nov 2006 03:23:58 +0100 Subject: USB: make drivers/usb/input/wacom_sys.c:wacom_sys_irq() static This patch makes the needlessly global wacom_sys_irq() static. Signed-off-by: Adrian Bunk Signed-off-by: Ping Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/wacom.h | 1 - drivers/usb/input/wacom_sys.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h index 1cf08f02c50..d85abfc5ab5 100644 --- a/drivers/usb/input/wacom.h +++ b/drivers/usb/input/wacom.h @@ -110,7 +110,6 @@ struct wacom_combo { }; extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); -extern void wacom_sys_irq(struct urb *urb); extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data); extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data); extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data); diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c index 3498b893b53..e7cc20ab815 100644 --- a/drivers/usb/input/wacom_sys.c +++ b/drivers/usb/input/wacom_sys.c @@ -42,7 +42,7 @@ static struct input_dev * get_input_dev(struct wacom_combo *wcombo) return wcombo->wacom->dev; } -void wacom_sys_irq(struct urb *urb) +static void wacom_sys_irq(struct urb *urb) { struct wacom *wacom = urb->context; struct wacom_combo wcombo; -- cgit v1.2.3-70-g09d2 From ad0327d680734b76c33f5438cd656bdfd26f5f5b Mon Sep 17 00:00:00 2001 From: "daniel@centurion.net.nz" Date: Sat, 11 Nov 2006 15:47:52 +1300 Subject: USB: airprime: New device ID Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 7f5d546da39..96c73726d74 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -19,6 +19,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */ + { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */ { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */ { }, }; -- cgit v1.2.3-70-g09d2 From 1f54a6ae79ab4369f17d6bc86eaff3125395af9c Mon Sep 17 00:00:00 2001 From: Oleg Verych Date: Fri, 17 Nov 2006 08:21:27 +0000 Subject: usb-serial: ti_usb, TI ez430 development tool ID usb-serial: ti_usb, TI ez430 development tool ID Signed-off-by: Oleg Verych Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 2 ++ drivers/usb/serial/ti_usb_3410_5052.h | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 07400c0c8a8..bbbb993447b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -228,6 +228,7 @@ static int product_5052_count; /* null entry */ static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -239,6 +240,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { static struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 02c1aeb9e1b..b5541bf991b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -28,6 +28,7 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 #define TI_3410_PRODUCT_ID 0x3410 +#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */ -- cgit v1.2.3-70-g09d2 From 444f4f91fda54bea57a0e31098a75f54548e8b28 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Thu, 16 Nov 2006 16:38:57 +0100 Subject: USB: pwc-if loop fix We should free urbs starting at [i-1] not [i]. Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/pwc/pwc-if.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 46c11483088..83739b213e7 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -866,11 +866,10 @@ int pwc_isoc_init(struct pwc_device *pdev) } if (ret) { /* De-allocate in reverse order */ - while (i >= 0) { + while (i--) { if (pdev->sbuf[i].urb != NULL) usb_free_urb(pdev->sbuf[i].urb); pdev->sbuf[i].urb = NULL; - i--; } return ret; } -- cgit v1.2.3-70-g09d2 From 6265d62f31e42cc839f929439a95f602d70d6bf7 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:02 +0100 Subject: usb: pcwd_usb free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/char/watchdog/pcwd_usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index bda45334d80..e275dd4a705 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -561,8 +561,7 @@ static struct notifier_block usb_pcwd_notifier = { */ static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd) { - if (usb_pcwd->intr_urb != NULL) - usb_free_urb (usb_pcwd->intr_urb); + usb_free_urb(usb_pcwd->intr_urb); if (usb_pcwd->intr_buffer != NULL) usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size, usb_pcwd->intr_buffer, usb_pcwd->intr_dma); -- cgit v1.2.3-70-g09d2 From 8f21d119f457ece27a69ac1dadd655deee6f2a20 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:09 +0100 Subject: usb: iforce-usb free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/input/joystick/iforce/iforce-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 105112fb7b5..80cdebcbcb9 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -178,9 +178,9 @@ static int iforce_usb_probe(struct usb_interface *intf, fail: if (iforce) { - if (iforce->irq) usb_free_urb(iforce->irq); - if (iforce->out) usb_free_urb(iforce->out); - if (iforce->ctrl) usb_free_urb(iforce->ctrl); + usb_free_urb(iforce->irq); + usb_free_urb(iforce->out); + usb_free_urb(iforce->ctrl); kfree(iforce); } -- cgit v1.2.3-70-g09d2 From ead54fcd6a6ffc0c45e318ffe8872d228bdff0e5 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:17 +0100 Subject: usb: usb-gigaset free kill urb cleanup - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/isdn/gigaset/usb-gigaset.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index 4ffa9eb1c28..5ebf49ac9b2 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -815,14 +815,11 @@ static int gigaset_probe(struct usb_interface *interface, return 0; error: - if (ucs->read_urb) - usb_kill_urb(ucs->read_urb); + usb_kill_urb(ucs->read_urb); kfree(ucs->bulk_out_buffer); - if (ucs->bulk_out_urb != NULL) - usb_free_urb(ucs->bulk_out_urb); + usb_free_urb(ucs->bulk_out_urb); kfree(cs->inbuf[0].rcvbuf); - if (ucs->read_urb != NULL) - usb_free_urb(ucs->read_urb); + usb_free_urb(ucs->read_urb); usb_set_intfdata(interface, NULL); ucs->read_urb = ucs->bulk_out_urb = NULL; cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL; @@ -850,11 +847,9 @@ static void gigaset_disconnect(struct usb_interface *interface) usb_kill_urb(ucs->bulk_out_urb); /* FIXME: only if active? */ kfree(ucs->bulk_out_buffer); - if (ucs->bulk_out_urb != NULL) - usb_free_urb(ucs->bulk_out_urb); + usb_free_urb(ucs->bulk_out_urb); kfree(cs->inbuf[0].rcvbuf); - if (ucs->read_urb != NULL) - usb_free_urb(ucs->read_urb); + usb_free_urb(ucs->read_urb); ucs->read_urb = ucs->bulk_out_urb = NULL; cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL; -- cgit v1.2.3-70-g09d2 From 4064fe43e8bf6cfe7fc6fadfbccc7fe1fbb1f0c1 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:22 +0100 Subject: usb: cinergyT2 free kill urb cleanup - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/dvb/cinergyT2/cinergyT2.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index ff7d4f56ced..55bc891768c 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -275,8 +275,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) int i; for (i=0; istream_urb[i]) - usb_free_urb(cinergyt2->stream_urb[i]); + usb_free_urb(cinergyt2->stream_urb[i]); usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); @@ -320,8 +319,7 @@ static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2) cinergyt2_control_stream_transfer(cinergyt2, 0); for (i=0; istream_urb[i]) - usb_kill_urb(cinergyt2->stream_urb[i]); + usb_kill_urb(cinergyt2->stream_urb[i]); } static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2) -- cgit v1.2.3-70-g09d2 From 5d02d027ac2e7778011fa833b3efa50b72a23dcd Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:27 +0100 Subject: usb: ttusb_dec free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/dvb/ttusb-dec/ttusb_dec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index a1c9fa9919e..8135f3e76ae 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1135,8 +1135,7 @@ static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec) dprintk("%s\n", __FUNCTION__); for (i = 0; i < ISO_BUF_COUNT; i++) - if (dec->iso_urb[i]) - usb_free_urb(dec->iso_urb[i]); + usb_free_urb(dec->iso_urb[i]); pci_free_consistent(NULL, ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * -- cgit v1.2.3-70-g09d2 From 5e55d2cea80254faa6ba5c13f3053070db57b63f Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:31 +0100 Subject: usb: pvrusb2-hdw free unlink urb cleanup - usb_free_urb() cleanup - usb_unlink_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index f920e0ccacd..1f787333d18 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1953,8 +1953,8 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, return hdw; fail: if (hdw) { - if (hdw->ctl_read_urb) usb_free_urb(hdw->ctl_read_urb); - if (hdw->ctl_write_urb) usb_free_urb(hdw->ctl_write_urb); + usb_free_urb(hdw->ctl_read_urb); + usb_free_urb(hdw->ctl_write_urb); if (hdw->ctl_read_buffer) kfree(hdw->ctl_read_buffer); if (hdw->ctl_write_buffer) kfree(hdw->ctl_write_buffer); if (hdw->controls) kfree(hdw->controls); @@ -2575,12 +2575,10 @@ static void pvr2_ctl_timeout(unsigned long data) struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) { hdw->ctl_timeout_flag = !0; - if (hdw->ctl_write_pend_flag && hdw->ctl_write_urb) { + if (hdw->ctl_write_pend_flag) usb_unlink_urb(hdw->ctl_write_urb); - } - if (hdw->ctl_read_pend_flag && hdw->ctl_read_urb) { + if (hdw->ctl_read_pend_flag) usb_unlink_urb(hdw->ctl_read_urb); - } } } -- cgit v1.2.3-70-g09d2 From 4c6f7d4a889ad997483a4c0318111b4a506f0fe3 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:50 +0100 Subject: usb: pvrusb2-io free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/pvrusb2/pvrusb2-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/pvrusb2/pvrusb2-io.c b/drivers/media/video/pvrusb2/pvrusb2-io.c index 70aa63eba0c..57fb3203354 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-io.c +++ b/drivers/media/video/pvrusb2/pvrusb2-io.c @@ -289,7 +289,7 @@ static void pvr2_buffer_done(struct pvr2_buffer *bp) pvr2_buffer_set_none(bp); bp->signature = 0; bp->stream = NULL; - if (bp->purb) usb_free_urb(bp->purb); + usb_free_urb(bp->purb); pvr2_trace(PVR2_TRACE_BUF_POOL,"/*---TRACE_FLOW---*/" " bufferDone %p",bp); } -- cgit v1.2.3-70-g09d2 From 90b2625a5159607e37871cd75370c189fc22d208 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:55 +0100 Subject: usb: pwc-if free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/pwc/pwc-if.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 83739b213e7..62070b9049e 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -867,8 +867,7 @@ int pwc_isoc_init(struct pwc_device *pdev) if (ret) { /* De-allocate in reverse order */ while (i--) { - if (pdev->sbuf[i].urb != NULL) - usb_free_urb(pdev->sbuf[i].urb); + usb_free_urb(pdev->sbuf[i].urb); pdev->sbuf[i].urb = NULL; } return ret; -- cgit v1.2.3-70-g09d2 From 14d2707b80d6a9d1e8e92718885f99b77531b339 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:34:59 +0100 Subject: usb: sn9c102_core free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/sn9c102/sn9c102_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 42fb60d985b..18458d46c0f 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -775,7 +775,7 @@ static int sn9c102_start_transfer(struct sn9c102_device* cam) return 0; free_urbs: - for (i = 0; (i < SN9C102_URBS) && cam->urb[i]; i++) + for (i = 0; i < SN9C102_URBS; i++) usb_free_urb(cam->urb[i]); free_buffers: -- cgit v1.2.3-70-g09d2 From 926b1e90093688d91cbc358e5339ad2861c86e46 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:02 +0100 Subject: usb: quickcam_messenger free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/usbvideo/quickcam_messenger.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 9a26b9484aa..bbf2beeeb44 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -190,8 +190,7 @@ static int qcm_alloc_int_urb(struct qcm *cam) static void qcm_free_int(struct qcm *cam) { - if (cam->button_urb) - usb_free_urb(cam->button_urb); + usb_free_urb(cam->button_urb); } #endif /* CONFIG_INPUT */ -- cgit v1.2.3-70-g09d2 From 8563650da0fb2df5755ea133d5fb182ded9d2ae8 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:12 +0100 Subject: usb: zc0301_core free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/zc0301/zc0301_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 5b556342442..52d0f759ee0 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -489,7 +489,7 @@ static int zc0301_start_transfer(struct zc0301_device* cam) return 0; free_urbs: - for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++) + for (i = 0; i < ZC0301_URBS; i++) usb_free_urb(cam->urb[i]); free_buffers: -- cgit v1.2.3-70-g09d2 From 8fd31e1d85d5c13c1273013067474ebb73ad6fd1 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:38 +0100 Subject: usb: irda-usb free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/net/irda/irda-usb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 14bda765c2f..6e95645e724 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1793,10 +1793,8 @@ err_out_3: err_out_2: usb_free_urb(self->tx_urb); err_out_1: - for (i = 0; i < self->max_rx_urb; i++) { - if (self->rx_urb[i]) - usb_free_urb(self->rx_urb[i]); - } + for (i = 0; i < self->max_rx_urb; i++) + usb_free_urb(self->rx_urb[i]); free_netdev(net); err_out: return ret; -- cgit v1.2.3-70-g09d2 From f988f272fe8de462045e9f298e5b7f1e39b2e53a Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:42 +0100 Subject: usb: zd1201 free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/zd1201.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 36b29ff0581..6cb66a356c9 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -1828,10 +1828,8 @@ err_start: /* Leave the device in reset state */ zd1201_docmd(zd, ZD1201_CMDCODE_INIT, 0, 0, 0); err_zd: - if (zd->tx_urb) - usb_free_urb(zd->tx_urb); - if (zd->rx_urb) - usb_free_urb(zd->rx_urb); + usb_free_urb(zd->tx_urb); + usb_free_urb(zd->rx_urb); kfree(zd); return err; } -- cgit v1.2.3-70-g09d2 From 459f836a612d28f224dbbc306ab63187014a6503 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:46 +0100 Subject: usb: ati_remote free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/ati_remote.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 787b847d38c..ff23318dc30 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -630,11 +630,8 @@ static int ati_remote_alloc_buffers(struct usb_device *udev, */ static void ati_remote_free_buffers(struct ati_remote *ati_remote) { - if (ati_remote->irq_urb) - usb_free_urb(ati_remote->irq_urb); - - if (ati_remote->out_urb) - usb_free_urb(ati_remote->out_urb); + usb_free_urb(ati_remote->irq_urb); + usb_free_urb(ati_remote->out_urb); usb_buffer_free(ati_remote->udev, DATA_BUFSIZE, ati_remote->inbuf, ati_remote->inbuf_dma); -- cgit v1.2.3-70-g09d2 From 2381526a793582ad18b30af0e3013ccad1a8bcdb Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:50 +0100 Subject: usb: ati_remote2 free urb cleanup Hello, - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/ati_remote2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c index f982a2b4a7f..83f1f79db7c 100644 --- a/drivers/usb/input/ati_remote2.c +++ b/drivers/usb/input/ati_remote2.c @@ -372,8 +372,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) int i; for (i = 0; i < 2; i++) { - if (ar2->urb[i]) - usb_free_urb(ar2->urb[i]); + usb_free_urb(ar2->urb[i]); if (ar2->buf[i]) usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); -- cgit v1.2.3-70-g09d2 From 6f07429fa295a04e06c93601e6c597e7a6d95495 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:54 +0100 Subject: usb: hid-core free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 2c12b04da11..f7a67c4db51 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -2080,13 +2080,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) return hid; fail: - - if (hid->urbin) - usb_free_urb(hid->urbin); - if (hid->urbout) - usb_free_urb(hid->urbout); - if (hid->urbctrl) - usb_free_urb(hid->urbctrl); + usb_free_urb(hid->urbin); + usb_free_urb(hid->urbout); + usb_free_urb(hid->urbctrl); hid_free_buffers(dev, hid); hid_free_device(hid); @@ -2117,8 +2113,7 @@ static void hid_disconnect(struct usb_interface *intf) usb_free_urb(hid->urbin); usb_free_urb(hid->urbctrl); - if (hid->urbout) - usb_free_urb(hid->urbout); + usb_free_urb(hid->urbout); hid_free_buffers(hid->dev, hid); hid_free_device(hid); -- cgit v1.2.3-70-g09d2 From 4ba0b2ed583b80cb26b9c8d8a8b418f677ec4a83 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:35:58 +0100 Subject: usb: usbkbd free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/usbkbd.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index b6c2ba7e05a..dac88640eab 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -208,10 +208,8 @@ static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd) static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd) { - if (kbd->irq) - usb_free_urb(kbd->irq); - if (kbd->led) - usb_free_urb(kbd->led); + usb_free_urb(kbd->irq); + usb_free_urb(kbd->led); if (kbd->new) usb_buffer_free(dev, 8, kbd->new, kbd->new_dma); if (kbd->cr) -- cgit v1.2.3-70-g09d2 From 2891a51cc27e0eed9474668b58e4f587b9f36694 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:03 +0100 Subject: usb: auerswald free kill urb cleanup - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/auerswald.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index e4971d6aaaf..c703f73e165 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -704,9 +704,7 @@ static void auerbuf_free (pauerbuf_t bp) { kfree(bp->bufp); kfree(bp->dr); - if (bp->urbp) { - usb_free_urb(bp->urbp); - } + usb_free_urb(bp->urbp); kfree(bp); } @@ -1155,8 +1153,7 @@ static void auerswald_int_release (pauerswald_t cp) dbg ("auerswald_int_release"); /* stop the int endpoint */ - if (cp->inturbp) - usb_kill_urb (cp->inturbp); + usb_kill_urb (cp->inturbp); /* deallocate memory */ auerswald_int_free (cp); -- cgit v1.2.3-70-g09d2 From f53510e8c49d00085a820ae98ca4753d4487dbad Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:14 +0100 Subject: usb: legousbtower free kill urb cleanup Hello, - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/legousbtower.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index f8611997bd7..5dce797bddb 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -317,12 +317,8 @@ static inline void tower_delete (struct lego_usb_tower *dev) tower_abort_transfers (dev); /* free data structures */ - if (dev->interrupt_in_urb != NULL) { - usb_free_urb (dev->interrupt_in_urb); - } - if (dev->interrupt_out_urb != NULL) { - usb_free_urb (dev->interrupt_out_urb); - } + usb_free_urb(dev->interrupt_in_urb); + usb_free_urb(dev->interrupt_out_urb); kfree (dev->read_buffer); kfree (dev->interrupt_in_buffer); kfree (dev->interrupt_out_buffer); @@ -502,15 +498,11 @@ static void tower_abort_transfers (struct lego_usb_tower *dev) if (dev->interrupt_in_running) { dev->interrupt_in_running = 0; mb(); - if (dev->interrupt_in_urb != NULL && dev->udev) { + if (dev->udev) usb_kill_urb (dev->interrupt_in_urb); - } - } - if (dev->interrupt_out_busy) { - if (dev->interrupt_out_urb != NULL && dev->udev) { - usb_kill_urb (dev->interrupt_out_urb); - } } + if (dev->interrupt_out_busy && dev->udev) + usb_kill_urb(dev->interrupt_out_urb); exit: dbg(2, "%s: leave", __FUNCTION__); -- cgit v1.2.3-70-g09d2 From df43121463d2e6dde9f7e40a7720e111e4cc600e Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:07 +0100 Subject: usb: phidgetkit free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/phidgetkit.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index 0dc0d034cc9..9110793f81d 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -650,8 +650,7 @@ out2: device_remove_file(kit->dev, &dev_output_attrs[i]); out: if (kit) { - if (kit->irq) - usb_free_urb(kit->irq); + usb_free_urb(kit->irq); if (kit->data) usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma); if (kit->dev) -- cgit v1.2.3-70-g09d2 From 5483eb1300fc052c294a9dac57d5bf6653126efd Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:18 +0100 Subject: usb: phidgetmotorcontrol free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/phidgetmotorcontrol.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c index 7702a4f7b08..c3469b0a67c 100644 --- a/drivers/usb/misc/phidgetmotorcontrol.c +++ b/drivers/usb/misc/phidgetmotorcontrol.c @@ -392,8 +392,7 @@ out2: device_remove_file(mc->dev, &dev_attrs[i]); out: if (mc) { - if (mc->irq) - usb_free_urb(mc->irq); + usb_free_urb(mc->irq); if (mc->data) usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma); if (mc->dev) -- cgit v1.2.3-70-g09d2 From 794c944ecd468ddf8a571bd37ab7b21035965f91 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:25 +0100 Subject: usb: ftdi_sio kill urb cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c186b4e73c7..89ce2775be1 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1388,8 +1388,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) flush_scheduled_work(); /* shutdown our bulk read */ - if (port->read_urb) - usb_kill_urb(port->read_urb); + usb_kill_urb(port->read_urb); } /* ftdi_close */ -- cgit v1.2.3-70-g09d2 From c69694b779714b751a326d1b886087322001e86f Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:22 +0100 Subject: usb: catc free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/catc.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c index f740325abac..907b820a5fa 100644 --- a/drivers/usb/net/catc.c +++ b/drivers/usb/net/catc.c @@ -786,14 +786,10 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id if ((!catc->ctrl_urb) || (!catc->tx_urb) || (!catc->rx_urb) || (!catc->irq_urb)) { err("No free urbs available."); - if (catc->ctrl_urb) - usb_free_urb(catc->ctrl_urb); - if (catc->tx_urb) - usb_free_urb(catc->tx_urb); - if (catc->rx_urb) - usb_free_urb(catc->rx_urb); - if (catc->irq_urb) - usb_free_urb(catc->irq_urb); + usb_free_urb(catc->ctrl_urb); + usb_free_urb(catc->tx_urb); + usb_free_urb(catc->rx_urb); + usb_free_urb(catc->irq_urb); free_netdev(netdev); return -ENOMEM; } -- cgit v1.2.3-70-g09d2 From 9a25f44f91b621f49b459687ae49d4fed4423d0e Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:29 +0100 Subject: usb: io_edgeport kill urb cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_edgeport.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 91bd3014ef1..d06547a13f2 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1038,9 +1038,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) edge_port->open = FALSE; edge_port->openPending = FALSE; - if (edge_port->write_urb) { - usb_kill_urb(edge_port->write_urb); - } + usb_kill_urb(edge_port->write_urb); if (edge_port->write_urb) { /* if this urb had a transfer buffer already (old transfer) free it */ -- cgit v1.2.3-70-g09d2 From 1cadc1378fe9cdee9515842a4bf9f42228448ad2 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:34 +0100 Subject: usb: keyspan free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 53be824eb1b..7639652cec4 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2306,22 +2306,16 @@ static void keyspan_shutdown (struct usb_serial *serial) } /* Now free them */ - if (s_priv->instat_urb) - usb_free_urb(s_priv->instat_urb); - if (s_priv->glocont_urb) - usb_free_urb(s_priv->glocont_urb); + usb_free_urb(s_priv->instat_urb); + usb_free_urb(s_priv->glocont_urb); for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); - if (p_priv->inack_urb) - usb_free_urb(p_priv->inack_urb); - if (p_priv->outcont_urb) - usb_free_urb(p_priv->outcont_urb); + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); for (j = 0; j < 2; j++) { - if (p_priv->in_urbs[j]) - usb_free_urb(p_priv->in_urbs[j]); - if (p_priv->out_urbs[j]) - usb_free_urb(p_priv->out_urbs[j]); + usb_free_urb(p_priv->in_urbs[j]); + usb_free_urb(p_priv->out_urbs[j]); } } -- cgit v1.2.3-70-g09d2 From 5505c2261eb5e7a6ff851afbe7f77d54d960e83b Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:38 +0100 Subject: usb: kobil_sct kill urb cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kobil_sct.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 8dd2afa2fca..237289920f0 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -353,8 +353,7 @@ static void kobil_close (struct usb_serial_port *port, struct file *filp) usb_free_urb( port->write_urb ); port->write_urb = NULL; } - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); } -- cgit v1.2.3-70-g09d2 From 73135bb9154f9565e8ae294ffa73f9e871d72b47 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:42 +0100 Subject: usb: mct_u232 free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mct_u232.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index b7582cc496d..a906e500a02 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -358,10 +358,8 @@ static int mct_u232_startup (struct usb_serial *serial) /* Puh, that's dirty */ port = serial->port[0]; rport = serial->port[1]; - if (port->read_urb) { - /* No unlinking, it wasn't submitted yet. */ - usb_free_urb(port->read_urb); - } + /* No unlinking, it wasn't submitted yet. */ + usb_free_urb(port->read_urb); port->read_urb = rport->interrupt_in_urb; rport->interrupt_in_urb = NULL; port->read_urb->context = port; -- cgit v1.2.3-70-g09d2 From 9aac10ff1d9a228d05491f68f933cf6a41b9debc Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:46 +0100 Subject: usb: navman kill urb cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/navman.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 0610409a656..054abee8165 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -95,8 +95,7 @@ static void navman_close(struct usb_serial_port *port, struct file *filp) { dbg("%s - port %d", __FUNCTION__, port->number); - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); } static int navman_write(struct usb_serial_port *port, -- cgit v1.2.3-70-g09d2 From 95d4316654a7e09778ebf81e03cab7040ecca1b0 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:51 +0100 Subject: usb: usb-serial free urb cleanup - usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 8006e51c34b..c1257d5292f 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -952,32 +952,28 @@ probe_error: port = serial->port[i]; if (!port) continue; - if (port->read_urb) - usb_free_urb (port->read_urb); + usb_free_urb(port->read_urb); kfree(port->bulk_in_buffer); } for (i = 0; i < num_bulk_out; ++i) { port = serial->port[i]; if (!port) continue; - if (port->write_urb) - usb_free_urb (port->write_urb); + usb_free_urb(port->write_urb); kfree(port->bulk_out_buffer); } for (i = 0; i < num_interrupt_in; ++i) { port = serial->port[i]; if (!port) continue; - if (port->interrupt_in_urb) - usb_free_urb (port->interrupt_in_urb); + usb_free_urb(port->interrupt_in_urb); kfree(port->interrupt_in_buffer); } for (i = 0; i < num_interrupt_out; ++i) { port = serial->port[i]; if (!port) continue; - if (port->interrupt_out_urb) - usb_free_urb (port->interrupt_out_urb); + usb_free_urb(port->interrupt_out_urb); kfree(port->interrupt_out_buffer); } -- cgit v1.2.3-70-g09d2 From bcb54a54033ff9359cf64e4283e4f4b92bf9132f Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Wed, 8 Nov 2006 15:36:55 +0100 Subject: usb: visor kill urb cleanup - usb_kill_urb() cleanup Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index befe2e11a04..eef5eaa5fa0 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -348,8 +348,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp) /* shutdown our urbs */ usb_kill_urb(port->read_urb); - if (port->interrupt_in_urb) - usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); /* Try to send shutdown message, if the device is gone, this will just fail. */ transfer_buffer = kmalloc (0x12, GFP_KERNEL); -- cgit v1.2.3-70-g09d2 From 1b7be3c066ae9238996a7a861b39b0bfd5860735 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 6 Nov 2006 12:05:00 -0500 Subject: OHCI: change priority level of resume log message All the other root-hub suspend or resume log messages, in ohci-hcd or any of the other host controller drivers, use the debug priority level. This patch (as815) makes the one single exception behave like all the rest. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index dcf9eb60132..4c9492779ed 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -175,7 +175,7 @@ __acquires(ohci->lock) break; case OHCI_USB_RESUME: /* HCFS changes sometime after INTR_RD */ - ohci_info(ohci, "%swakeup\n", + ohci_dbg(ohci, "%swakeup root hub\n", autostopped ? "auto-" : ""); break; case OHCI_USB_OPER: -- cgit v1.2.3-70-g09d2 From 7a5c7b42d3c7b1e0085d48414ee73003d3888d1f Mon Sep 17 00:00:00 2001 From: Naranjo Manuel Francisco Date: Wed, 15 Nov 2006 15:14:27 -0300 Subject: USB: fix aircable.c: inconsequent NULL checking > 2006/11/11, Adrian Bunk : > > The Coverity checker spotted the following in > > drivers/usb/serial/aircable.c: > > > > <-- snip --> > > > > ... > > static void aircable_read(void *params) > > { > > ... Hi everyone, Sorry for the long time response but here is the patch, I think this way should work, if anyone has any suggestion let me know. What I do now is, in case I don't have the tty available I reschedule the work, I have tried it and it works with no problem, I even tried removing the device, and didn't find anything strange. Signed-off-by: Naranjo Manuel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/aircable.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 8554c1a7b9f..b1b5707bc99 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -270,8 +270,11 @@ static void aircable_read(void *params) */ tty = port->tty; - if (!tty) + if (!tty) { schedule_work(&priv->rx_work); + err("%s - No tty available", __FUNCTION__); + return ; + } count = min(64, serial_buf_data_avail(priv->rx_buf)); -- cgit v1.2.3-70-g09d2 From db063507b40664de33a61161c90358fe6fc9565a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 13 Nov 2006 15:02:04 -0500 Subject: USB core: fix compiler warning about usb_autosuspend_work This patch (as821) fixes a compiler warning when CONFIG_PM isn't on ("usb_autosuspend_work" defined but not used). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index a83c2d5065c..81cb52564e6 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -200,13 +200,6 @@ static void ksuspend_usb_cleanup(void) destroy_workqueue(ksuspend_usb_wq); } -#else - -#define ksuspend_usb_init() 0 -#define ksuspend_usb_cleanup() do {} while (0) - -#endif - #ifdef CONFIG_USB_SUSPEND /* usb_autosuspend_work - callback routine to autosuspend a USB device */ @@ -225,7 +218,14 @@ static void usb_autosuspend_work(void *_udev) static void usb_autosuspend_work(void *_udev) {} -#endif +#endif /* CONFIG_USB_SUSPEND */ + +#else + +#define ksuspend_usb_init() 0 +#define ksuspend_usb_cleanup() do {} while (0) + +#endif /* CONFIG_PM */ /** * usb_alloc_dev - usb device constructor (usbcore-internal) -- cgit v1.2.3-70-g09d2 From 49314378ac9b76c40f221e3e5aed866e912e7e99 Mon Sep 17 00:00:00 2001 From: Jaco Kroon Date: Wed, 15 Nov 2006 01:02:08 -0800 Subject: USB: add Digitech USB-Storage to unusual_devs.h The mass storage device from Digitech designed for Flash Cards, as found on (for example) the GNX4 device has issues with residue, similar to the bug report at http://kerneltrap.org/node/6297. This patch adds the faulty storage device to unusual_devs.h, this not only reduces the noise in dmesg but also increases the transfer speeds by a factor of 7x for me (89kB/s -> 637kB/s). T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1210 ProdID=0003 Rev= 1.00 S: Manufacturer=DigiTech HMG S: Product=DigiTech Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Jaco Kroon Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index efb047f431e..db8b26012c7 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1318,6 +1318,16 @@ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110, US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ), +/* Reported by Jaco Kroon + * The usb-storage module found on the Digitech GNX4 (and supposedly other + * devices) misbehaves and causes a bunch of invalid I/O errors. + */ +UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, + "Digitech HMG", + "DigiTech Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Vilius Bilinkevicius Date: Fri, 17 Nov 2006 11:53:23 +0100 Subject: usb: microtek possible memleak fix Possible memleak fix on error path. The changes: - out_kfree2 and out_free_urb replaced - missing scsi_host_put() added Here it goes: Signed-off-by: Mariusz Kozlowski Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/image/microtek.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 3038ed0700d..8ccddf74534 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -796,7 +796,7 @@ static int mts_usb_probe(struct usb_interface *intf, new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL); if (!new_desc->context.scsi_status) - goto out_kfree2; + goto out_free_urb; new_desc->usb_dev = dev; new_desc->usb_intf = intf; @@ -822,18 +822,20 @@ static int mts_usb_probe(struct usb_interface *intf, new_desc->host = scsi_host_alloc(&mts_scsi_host_template, sizeof(new_desc)); if (!new_desc->host) - goto out_free_urb; + goto out_kfree2; new_desc->host->hostdata[0] = (unsigned long)new_desc; if (scsi_add_host(new_desc->host, NULL)) { err_retval = -EIO; - goto out_free_urb; + goto out_host_put; } scsi_scan_host(new_desc->host); usb_set_intfdata(intf, new_desc); return 0; + out_host_put: + scsi_host_put(new_desc->host); out_kfree2: kfree(new_desc->context.scsi_status); out_free_urb: -- cgit v1.2.3-70-g09d2 From 1f26e28d3e32339ca683f087cd55a70e2befc333 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 16 Nov 2006 10:16:00 -0500 Subject: USB: net2280: don't send unwanted zero-length packets The net2280 driver is too eager to send zero-length packets when IN tokens are received on ep0. No such packet should be sent (the driver should NAK) before the gadget driver has queued the proper response. Otherwise deferred responses are impossible. This patch (as823) makes net2280 avoid sending ZLPs for IN transfers on ep0 until a response has been submitted, and avoids stalling when an OUT packet is received before a request has been submitted for an OUT transfer on ep0. Signed-off-by: Alan Stern Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/net2280.c | 8 ++++++-- drivers/usb/gadget/net2280.h | 3 ++- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3acc896a5d4..0b590831582 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -1040,6 +1040,7 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) } /* else the irq handler advances the queue. */ + ep->responded = 1; if (req) list_add_tail (&req->queue, &ep->queue); done: @@ -2188,7 +2189,8 @@ static void handle_ep_small (struct net2280_ep *ep) ep->stopped = 1; set_halt (ep); mode = 2; - } else if (!req && !ep->stopped) + } else if (ep->responded && + !req && !ep->stopped) write_fifo (ep, NULL); } } else { @@ -2203,7 +2205,7 @@ static void handle_ep_small (struct net2280_ep *ep) } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) && req && req->req.actual == req->req.length) - || !req) { + || (ep->responded && !req)) { ep->dev->protocol_stall = 1; set_halt (ep); ep->stopped = 1; @@ -2469,6 +2471,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) /* we made the hardware handle most lowlevel requests; * everything else goes uplevel to the gadget code. */ + ep->responded = 1; switch (u.r.bRequest) { case USB_REQ_GET_STATUS: { struct net2280_ep *e; @@ -2537,6 +2540,7 @@ delegate: u.r.bRequestType, u.r.bRequest, w_value, w_index, w_length, readl (&ep->regs->ep_cfg)); + ep->responded = 0; spin_unlock (&dev->lock); tmp = dev->driver->setup (&dev->gadget, &u.r); spin_lock (&dev->lock); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index 957d6df3401..44ca139983d 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -110,7 +110,8 @@ struct net2280_ep { out_overflow : 1, stopped : 1, is_in : 1, - is_iso : 1; + is_iso : 1, + responded : 1; }; static inline void allow_status (struct net2280_ep *ep) -- cgit v1.2.3-70-g09d2 From f0d7f27351058284f62ab4848909373c2d1f5ce8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 16 Nov 2006 23:56:15 -0800 Subject: USB: EHCI hooks for high speed electrical tests EHCI hooks for high speed electrical tests of the root hub ports. The expectation is that a usermode program actually triggers the test, making the same control request it would make for an external hub. Tests for peripheral upstream ports would issue a different request. In all cases, the hardware needs re-initialization before it could be used "normally" again (e.g. unplug/replug, rmmod/modprobe). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 1b20722c102..7c170a29f95 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -319,6 +319,7 @@ static int ehci_hub_control ( u32 temp, status; unsigned long flags; int retval = 0; + unsigned selector; /* * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. @@ -506,6 +507,8 @@ static int ehci_hub_control ( } break; case SetPortFeature: + selector = wIndex >> 8; + wIndex &= 0xff; if (!wIndex || wIndex > ports) goto error; wIndex--; @@ -559,6 +562,22 @@ static int ehci_hub_control ( } writel (temp, &ehci->regs->port_status [wIndex]); break; + + /* For downstream facing ports (these): one hub port is put + * into test mode according to USB2 11.24.2.13, then the hub + * must be reset (which for root hub now means rmmod+modprobe, + * or else system reboot). See EHCI 2.3.9 and 4.14 for info + * about the EHCI-specific stuff. + */ + case USB_PORT_FEAT_TEST: + if (!selector || selector > 5) + goto error; + ehci_quiesce(ehci); + ehci_halt(ehci); + temp |= selector << 16; + writel (temp, &ehci->regs->port_status [wIndex]); + break; + default: goto error; } -- cgit v1.2.3-70-g09d2 From 93f1a47c4af34c4ee014b3d2aae70089b3b69f72 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 16 Nov 2006 23:34:58 -0800 Subject: USB: add ehci_hcd.ignore_oc parameter Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 10 ++++++++-- drivers/usb/host/ehci-hub.c | 18 +++++++++++++++--- 2 files changed, 23 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9030994aba9..f2ceb5fdbeb 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -126,6 +126,11 @@ static unsigned park = 0; module_param (park, uint, S_IRUGO); MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); +/* for flakey hardware, ignore overcurrent indicators */ +static int ignore_oc = 0; +module_param (ignore_oc, bool, S_IRUGO); +MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); + #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) /*-------------------------------------------------------------------------*/ @@ -541,9 +546,10 @@ static int ehci_run (struct usb_hcd *hcd) temp = HC_VERSION(readl (&ehci->caps->hc_capbase)); ehci_info (ehci, - "USB %x.%x started, EHCI %x.%02x, driver %s\n", + "USB %x.%x started, EHCI %x.%02x, driver %s%s\n", ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - temp >> 8, temp & 0xff, DRIVER_VERSION); + temp >> 8, temp & 0xff, DRIVER_VERSION, + ignore_oc ? ", overcurrent ignored" : ""); writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 7c170a29f95..0a56dfa2745 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -218,6 +218,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp, status = 0; + u32 mask; int ports, i, retval = 1; unsigned long flags; @@ -233,6 +234,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) retval++; } + /* Some boards (mostly VIA?) report bogus overcurrent indications, + * causing massive log spam unless we completely ignore them. It + * may be relevant that VIA VT8235 controlers, where PORT_POWER is + * always set, seem to clear PORT_OCC and PORT_CSC when writing to + * PORT_POWER; that's surprising, but maybe within-spec. + */ + if (!ignore_oc) + mask = PORT_CSC | PORT_PEC | PORT_OCC; + else + mask = PORT_CSC | PORT_PEC; + // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND + /* no hub change reports (bit 0) for now (power, ...) */ /* port N changes (bit N)? */ @@ -250,8 +263,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) } if (!(temp & PORT_CONNECT)) ehci->reset_done [i] = 0; - if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0 - // PORT_STAT_C_SUSPEND? + if ((temp & mask) != 0 || ((temp & PORT_RESUME) != 0 && time_after (jiffies, ehci->reset_done [i]))) { @@ -418,7 +430,7 @@ static int ehci_hub_control ( status |= 1 << USB_PORT_FEAT_C_CONNECTION; if (temp & PORT_PEC) status |= 1 << USB_PORT_FEAT_C_ENABLE; - if (temp & PORT_OCC) + if ((temp & PORT_OCC) && !ignore_oc) status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; /* whoever resumes must GetPortStatus to complete it!! */ -- cgit v1.2.3-70-g09d2 From 2e46b74852446404d64b0b00ce872724bfa627ab Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Fri, 17 Nov 2006 17:49:22 +0100 Subject: usb: cypress_m8 init error path fix If at some point cypress_init() fails deregister only the resources that were registered until that point. Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cypress_m8.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f2e89a08365..093f303b318 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1684,15 +1684,14 @@ static int __init cypress_init(void) info(DRIVER_DESC " " DRIVER_VERSION); return 0; + failed_usb_register: - usb_deregister(&cypress_driver); -failed_ca42v2_register: usb_serial_deregister(&cypress_ca42v2_device); -failed_hidcom_register: +failed_ca42v2_register: usb_serial_deregister(&cypress_hidcom_device); -failed_em_register: +failed_hidcom_register: usb_serial_deregister(&cypress_earthmate_device); - +failed_em_register: return retval; } -- cgit v1.2.3-70-g09d2 From 27a3de4cfc3508b30803b7350ca6385b3c53f223 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 20 Nov 2006 03:23:54 +0100 Subject: USB: make drivers/usb/host/u132-hcd.c:u132_hcd_wait static This patch makes the needlessly global "u132_hcd_wait" static. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/u132-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 32c635ecbf3..5b06e2e8662 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -71,7 +71,7 @@ static int distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" "t setup"); -DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait); +static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait); /* * u132_module_lock exists to protect access to global variables * -- cgit v1.2.3-70-g09d2 From 9ce8540c884c19c0f5f38c9e85d4bdc192baf321 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 20 Nov 2006 03:24:44 +0100 Subject: USB: ftdi-elan.c: fixes and cleanups This patch contains the following possible cleanups: - make the needlessly global ftdi_release_platform_dev() static - remove the unused usb_ftdi_elan_read_reg() - proper prototypes for the following functions: - usb_ftdi_elan_read_pcimem() - usb_ftdi_elan_write_pcimem() Note that the misplaced prototypes for the latter ones in drivers/usb/host/u132-hcd.c were buggy. Depending on the calling convention of the architecture calling one of them could have turned your stack into garbage. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/u132-hcd.c | 6 +----- drivers/usb/misc/ftdi-elan.c | 10 +--------- drivers/usb/misc/usb_u132.h | 4 ++++ 3 files changed, 6 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5b06e2e8662..87106085a98 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -205,11 +205,7 @@ struct u132 { struct u132_port port[MAX_U132_PORTS]; struct u132_endp *endp[MAX_U132_ENDPS]; }; -int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data); -int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs, - u8 width, u32 *data); -int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs, - u8 width, u32 data); + /* * these can not be inlines because we need the structure offset!! * Does anyone have a better way????? diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 0e8ee2dea88..cb0ba3107d7 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -303,7 +303,7 @@ void ftdi_elan_gone_away(struct platform_device *pdev) EXPORT_SYMBOL_GPL(ftdi_elan_gone_away); -void ftdi_release_platform_dev(struct device *dev) +static void ftdi_release_platform_dev(struct device *dev) { dev->parent = NULL; } @@ -1426,14 +1426,6 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data) } } -int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data) -{ - struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev); - return ftdi_elan_read_reg(ftdi, data); -} - - -EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_reg); static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset, u8 width, u32 *data) { diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h index 551ba8906d6..fbb52b21349 100644 --- a/drivers/usb/misc/usb_u132.h +++ b/drivers/usb/misc/usb_u132.h @@ -95,3 +95,7 @@ int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number, int halted, int skipped, int actual, int non_null)); int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number, void *endp); +int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset, + u8 width, u32 *data); +int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset, + u8 width, u32 data); -- cgit v1.2.3-70-g09d2 From 24ced062a2965645d651ff92bc93b2c1f926474e Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Fri, 17 Nov 2006 22:50:15 +0100 Subject: usbtouchscreen: add support for DMC TSC-10/25 devices Adds support for the DMC TSC-10 and TSC-25 usb touchscreen controllers. Signed-off-by: Holger Schurig Signed-off-by: Daniel Ritz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/Kconfig | 6 +++ drivers/usb/input/usbtouchscreen.c | 96 +++++++++++++++++++++++++++++++++++++- 2 files changed, 101 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 20db36448ab..661af7aa623 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -221,6 +221,7 @@ config USB_TOUCHSCREEN - ITM - some other eTurboTouch - Gunze AHL61 + - DMC TSC-10/25 Have a look at for a usage description and the required user-space stuff. @@ -258,6 +259,11 @@ config USB_TOUCHSCREEN_GUNZE bool "Gunze AHL61 device support" if EMBEDDED depends on USB_TOUCHSCREEN +config USB_TOUCHSCREEN_DMC_TSC10 + default y + bool "DMC TSC-10/25 device support" if EMBEDDED + depends on USB_TOUCHSCREEN + config USB_YEALINK tristate "Yealink usb-p1k voip phone" depends on USB && INPUT && EXPERIMENTAL diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 933ceddf3de..49704d4ed0e 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -8,6 +8,7 @@ * - PanJit TouchSet * - eTurboTouch * - Gunze AHL61 + * - DMC TSC-10/25 * * Copyright (C) 2004-2006 by Daniel Ritz * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -30,6 +31,8 @@ * - ITM parts are from itmtouch.c * - 3M parts are from mtouchusb.c * - PanJit parts are from an unmerged driver by Lanslott Gish + * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged + * driver from Marius Vollmer * *****************************************************************************/ @@ -44,7 +47,7 @@ #include -#define DRIVER_VERSION "v0.4" +#define DRIVER_VERSION "v0.5" #define DRIVER_AUTHOR "Daniel Ritz " #define DRIVER_DESC "USB Touchscreen Driver" @@ -103,6 +106,7 @@ enum { DEVTYPE_ITM, DEVTYPE_ETURBO, DEVTYPE_GUNZE, + DEVTYPE_DMC_TSC10, }; static struct usb_device_id usbtouch_devices[] = { @@ -139,6 +143,10 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE}, #endif +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, +#endif + {} }; @@ -312,6 +320,80 @@ static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int * } #endif +/***************************************************************************** + * DMC TSC-10/25 Part + * + * Documentation about the controller and it's protocol can be found at + * http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf + * http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf + */ +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + +/* supported data rates. currently using 130 */ +#define TSC10_RATE_POINT 0x50 +#define TSC10_RATE_30 0x40 +#define TSC10_RATE_50 0x41 +#define TSC10_RATE_80 0x42 +#define TSC10_RATE_100 0x43 +#define TSC10_RATE_130 0x44 +#define TSC10_RATE_150 0x45 + +/* commands */ +#define TSC10_CMD_RESET 0x55 +#define TSC10_CMD_RATE 0x05 +#define TSC10_CMD_DATA1 0x01 + +static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) +{ + struct usb_device *dev = usbtouch->udev; + int ret; + unsigned char buf[2]; + + /* reset */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RESET, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + if (buf[0] != 0x06 || buf[1] != 0x00) + return -ENODEV; + + /* set coordinate output rate */ + buf[0] = buf[1] = 0xFF; + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_RATE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + if (buf[0] != 0x06 || buf[1] != 0x00) + return -ENODEV; + + /* start sending data */ + ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), + TSC10_CMD_DATA1, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + if (ret < 0) + return ret; + + return 0; +} + + +static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +{ + *x = ((pkt[2] & 0x03) << 8) | pkt[1]; + *y = ((pkt[4] & 0x03) << 8) | pkt[3]; + *touch = pkt[0] & 0x01; + + return 1; +} +#endif + + /***************************************************************************** * the different device descriptors */ @@ -389,6 +471,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = gunze_read_data, }, #endif + +#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10 + [DEVTYPE_DMC_TSC10] = { + .min_xc = 0x0, + .max_xc = 0x03ff, + .min_yc = 0x0, + .max_yc = 0x03ff, + .rept_size = 5, + .init = dmc_tsc10_init, + .read_data = dmc_tsc10_read_data, + }, +#endif }; -- cgit v1.2.3-70-g09d2 From 827982c577cddbe50b2120e577a60f6376716900 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Nov 2006 11:38:57 -0800 Subject: USB: pxa2xx_udc recognizes ixp425 rev b0 chip Make the pxa2xx_udc driver recognize a newer revision of the IXP425 chip. Signed-off-by: Milan Svoboda Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa2xx_udc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 671c24bc6d7..1ed506e9598 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2472,6 +2472,7 @@ static struct pxa2xx_udc memory = { #define PXA210_B1 0x00000123 #define PXA210_B0 0x00000122 #define IXP425_A0 0x000001c1 +#define IXP425_B0 0x000001f1 #define IXP465_AD 0x00000200 /* @@ -2509,6 +2510,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) break; #elif defined(CONFIG_ARCH_IXP4XX) case IXP425_A0: + case IXP425_B0: case IXP465_AD: dev->has_cfr = 1; out_dma = 0; -- cgit v1.2.3-70-g09d2 From 7481bb8a7f2fd6b411764e0dc91713b1a58fce4c Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Nov 2006 11:41:39 -0800 Subject: USB: lh7a40x_udc remove double declaration Remove minor double-declaration goof. Signed-off-by: Milan Svoboda Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/lh7a40x_udc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 179259664c1..4a991564a03 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -83,7 +83,6 @@ static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t); static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *); static int lh7a40x_set_halt(struct usb_ep *ep, int); static int lh7a40x_fifo_status(struct usb_ep *ep); -static int lh7a40x_fifo_status(struct usb_ep *ep); static void lh7a40x_fifo_flush(struct usb_ep *ep); static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep); static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr); -- cgit v1.2.3-70-g09d2 From 8bb22d2bdaac415965e7be1af8da2b8f3ee35f31 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 21 Nov 2006 22:02:54 +0100 Subject: USB: make drivers/usb/core/driver.c:usb_device_match() static usb_device_match() can now become static. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 44dd6103fb4..40c1bf09b2b 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -525,7 +525,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, } EXPORT_SYMBOL_GPL_FUTURE(usb_match_id); -int usb_device_match(struct device *dev, struct device_driver *drv) +static int usb_device_match(struct device *dev, struct device_driver *drv) { /* devices and interfaces are handled separately */ if (is_usb_device(dev)) { -- cgit v1.2.3-70-g09d2 From 54ecf1fba683f779a1b36abed9c843decafc7d5b Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Mon, 6 Nov 2006 17:37:20 +0100 Subject: USB: idmouse cleanup Just digging through code and found these needless variable initializations. So here is the patch. Signed-off-by: Mariusz Kozlowski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/idmouse.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index c5fee0033a8..c9418535bef 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -125,12 +125,12 @@ static DEFINE_MUTEX(disconnect_mutex); static int idmouse_create_image(struct usb_idmouse *dev) { - int bytes_read = 0; - int bulk_read = 0; - int result = 0; + int bytes_read; + int bulk_read; + int result; memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1); - bytes_read += sizeof(HEADER)-1; + bytes_read = sizeof(HEADER)-1; /* reset the device and set a fast blink rate */ result = ftip_command(dev, FTIP_RELEASE, 0, 0); @@ -208,9 +208,9 @@ static inline void idmouse_delete(struct usb_idmouse *dev) static int idmouse_open(struct inode *inode, struct file *file) { - struct usb_idmouse *dev = NULL; + struct usb_idmouse *dev; struct usb_interface *interface; - int result = 0; + int result; /* prevent disconnects */ mutex_lock(&disconnect_mutex); @@ -305,7 +305,7 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count loff_t * ppos) { struct usb_idmouse *dev; - int result = 0; + int result; dev = (struct usb_idmouse *) file->private_data; @@ -329,7 +329,7 @@ static int idmouse_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); - struct usb_idmouse *dev = NULL; + struct usb_idmouse *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int result; -- cgit v1.2.3-70-g09d2 From afd21ee5abd0fef567dbfa234099304886ff83ce Mon Sep 17 00:00:00 2001 From: Julien BLACHE Date: Wed, 15 Nov 2006 00:00:17 -0500 Subject: USB: hid-core: canonical defines for Apple USB device IDs Use canonical defines for the Apple USB device IDs. Also add the Geyser IV devices missing in my previous patch. Signed-off-by: Julien BLACHE Acked-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index f7a67c4db51..a49644b7c58 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1640,6 +1640,19 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304 +#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e +#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f +#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214 +#define USB_DEVICE_ID_APPLE_GEYSER_ISO 0x0215 +#define USB_DEVICE_ID_APPLE_GEYSER_JIS 0x0216 +#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI 0x0217 +#define USB_DEVICE_ID_APPLE_GEYSER3_ISO 0x0218 +#define USB_DEVICE_ID_APPLE_GEYSER3_JIS 0x0219 +#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI 0x021a +#define USB_DEVICE_ID_APPLE_GEYSER4_ISO 0x021b +#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c +#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a +#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 @@ -1807,17 +1820,19 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION }, - { USB_VENDOR_ID_APPLE, 0x020E, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x020F, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, - { USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0217, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x0218, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, - { USB_VENDOR_ID_APPLE, 0x0219, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x021B, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN }, { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE }, -- cgit v1.2.3-70-g09d2 From 7ac9da10af7ffd94cfd07e097b93d588bbd32b75 Mon Sep 17 00:00:00 2001 From: Burman Yan Date: Wed, 22 Nov 2006 20:54:38 +0200 Subject: USB serial: replace kmalloc+memset with kzalloc Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ark3116.c | 3 +-- drivers/usb/serial/console.c | 6 ++---- drivers/usb/serial/garmin_gps.c | 3 +-- drivers/usb/serial/mos7840.c | 3 +-- drivers/usb/serial/ti_usb_3410_5052.c | 3 +-- 5 files changed, 6 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index ca52f12f0e2..863966c1c5a 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -85,10 +85,9 @@ static int ark3116_attach(struct usb_serial *serial) int i; for (i = 0; i < serial->num_ports; ++i) { - priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL); + priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL); if (!priv) goto cleanup; - memset(priv, 0x00, sizeof (struct ark3116_private)); spin_lock_init(&priv->lock); usb_set_serial_port_data(serial->port[i], priv); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 3a9073dbfe6..7167728d764 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -166,19 +166,17 @@ static int usb_console_setup(struct console *co, char *options) if (serial->type->set_termios) { /* build up a fake tty structure so that the open call has something * to look at to get the cflag value */ - tty = kmalloc (sizeof (*tty), GFP_KERNEL); + tty = kzalloc(sizeof(*tty), GFP_KERNEL); if (!tty) { err ("no more memory"); return -ENOMEM; } - termios = kmalloc (sizeof (*termios), GFP_KERNEL); + termios = kzalloc(sizeof(*termios), GFP_KERNEL); if (!termios) { err ("no more memory"); kfree (tty); return -ENOMEM; } - memset (tty, 0x00, sizeof(*tty)); - memset (termios, 0x00, sizeof(*termios)); termios->c_cflag = cflag; tty->termios = termios; port->tty = tty; diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 4543152a996..6530d391ebe 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1523,12 +1523,11 @@ static int garmin_attach (struct usb_serial *serial) dbg("%s", __FUNCTION__); - garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL); + garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__); return -ENOMEM; } - memset (garmin_data_p, 0, sizeof(struct garmin_data)); init_timer(&garmin_data_p->timer); spin_lock_init(&garmin_data_p->lock); INIT_LIST_HEAD(&garmin_data_p->pktlist); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 5b71962d035..02c89e10b2c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2596,12 +2596,11 @@ static int mos7840_startup(struct usb_serial *serial) /* set up port private structures */ for (i = 0; i < serial->num_ports; ++i) { - mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL); + mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { err("%s - Out of memory", __FUNCTION__); return -ENOMEM; } - memset(mos7840_port, 0, sizeof(struct moschip_port)); /* Initialize all port interrupt end point to port 0 int endpoint * * Our device has only one interrupt end point comman to all port */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index bbbb993447b..ae98d8cbdbb 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -461,13 +461,12 @@ static int ti_startup(struct usb_serial *serial) /* set up port structures */ for (i = 0; i < serial->num_ports; ++i) { - tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL); + tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL); if (tport == NULL) { dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__); status = -ENOMEM; goto free_tports; } - memset(tport, 0, sizeof(struct ti_port)); spin_lock_init(&tport->tp_lock); tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; -- cgit v1.2.3-70-g09d2 From 8feabf70f51f3f6772e2beda608a0ebca1dbf46a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 24 Nov 2006 03:24:03 +0100 Subject: USB: build the appledisplay driver We do already have both the code and a config option, so why not build this driver? ;-) Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 11dc59540cd..2cba07d3197 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -4,6 +4,7 @@ # obj-$(CONFIG_USB_ADUTUX) += adutux.o +obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o obj-$(CONFIG_USB_AUERSWALD) += auerswald.o obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o obj-$(CONFIG_USB_CYTHERM) += cytherm.o -- cgit v1.2.3-70-g09d2 From 9aa742ef7c1a7ff8e6df92a93ce3688e99fa66e3 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 23 Nov 2006 12:45:31 +0100 Subject: USB: endianness fix for asix.c the latest update for asix.c reverted some endianness fixes. This reinstates them. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/asix.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 881841e600d..95e682e2c9d 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -249,9 +249,9 @@ asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; req->bRequest = cmd; - req->wValue = value; - req->wIndex = index; - req->wLength = size; + req->wValue = cpu_to_le16(value); + req->wIndex = cpu_to_le16(index); + req->wLength = cpu_to_le16(size); usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), -- cgit v1.2.3-70-g09d2 From 10c8211c634f759633ffcdc3b0e2913963b32abc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 23 Nov 2006 15:40:17 +0100 Subject: USB: pegasus error path not resetting task's state there is an error path in the pegasus driver which can leave the task in TASK_UNINTERRUPTIBLE. Depending on when it schedules next, this can be bad. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/pegasus.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 33abbd2176b..69eb0db399d 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -163,6 +163,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size, /* using ATOMIC, we'd never wake up if we slept */ if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) { + set_current_state(TASK_RUNNING); if (ret == -ENODEV) netif_device_detach(pegasus->net); if (netif_msg_drv(pegasus)) -- cgit v1.2.3-70-g09d2 From 7e27780ffdf5fcf8675dfb278ca316a1f2b7e179 Mon Sep 17 00:00:00 2001 From: Sarah Bailey Date: Sat, 18 Nov 2006 22:30:16 -0800 Subject: USB: added dynamic major number for USB endpoints This patch is an update for Greg K-H's proposed usbfs2: http://sourceforge.net/mailarchive/message.php?msg_id=19295229 It creates a dynamic major for USB endpoints and fixes the endpoint minor calculation. Signed-off-by: Sarah Bailey Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/endpoint.c | 98 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 85 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 3b2d137912b..c505b767cee 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -10,15 +10,20 @@ */ #include +#include +#include #include #include "usb.h" -/* endpoint stuff */ +#define MAX_ENDPOINT_MINORS (64*128*32) +static int usb_endpoint_major; +static DEFINE_IDR(endpoint_idr); struct ep_device { struct usb_endpoint_descriptor *desc; struct usb_device *udev; struct device dev; + int minor; }; #define to_ep_device(_dev) \ container_of(_dev, struct ep_device, dev) @@ -152,6 +157,55 @@ static struct attribute_group ep_dev_attr_grp = { .attrs = ep_dev_attrs, }; +static int usb_endpoint_major_init(void) +{ + dev_t dev; + int error; + + error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS, + "usb_endpoint"); + if (error) { + err("unable to get a dynamic major for usb endpoints"); + return error; + } + usb_endpoint_major = MAJOR(dev); + + return error; +} + +static void usb_endpoint_major_cleanup(void) +{ + unregister_chrdev_region(MKDEV(usb_endpoint_major, 0), + MAX_ENDPOINT_MINORS); +} + +static int endpoint_get_minor(struct ep_device *ep_dev) +{ + static DEFINE_MUTEX(minor_lock); + int retval = -ENOMEM; + int id; + + mutex_lock(&minor_lock); + if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0) + goto exit; + + retval = idr_get_new(&endpoint_idr, ep_dev, &id); + if (retval < 0) { + if (retval == -EAGAIN) + retval = -ENOMEM; + goto exit; + } + ep_dev->minor = id & MAX_ID_MASK; +exit: + mutex_unlock(&minor_lock); + return retval; +} + +static void endpoint_free_minor(struct ep_device *ep_dev) +{ + idr_remove(&endpoint_idr, ep_dev->minor); +} + static struct endpoint_class { struct kref kref; struct class *class; @@ -176,11 +230,20 @@ static int init_endpoint_class(void) ep_class->class = class_create(THIS_MODULE, "usb_endpoint"); if (IS_ERR(ep_class->class)) { result = IS_ERR(ep_class->class); - kfree(ep_class); - ep_class = NULL; - goto exit; + goto class_create_error; } + result = usb_endpoint_major_init(); + if (result) + goto endpoint_major_error; + + goto exit; + +endpoint_major_error: + class_destroy(ep_class->class); +class_create_error: + kfree(ep_class); + ep_class = NULL; exit: return result; } @@ -191,6 +254,7 @@ static void release_endpoint_class(struct kref *kref) class_destroy(ep_class->class); kfree(ep_class); ep_class = NULL; + usb_endpoint_major_cleanup(); } static void destroy_endpoint_class(void) @@ -213,7 +277,6 @@ int usb_create_ep_files(struct device *parent, { char name[8]; struct ep_device *ep_dev; - int minor; int retval; retval = init_endpoint_class(); @@ -226,12 +289,16 @@ int usb_create_ep_files(struct device *parent, goto error_alloc; } - /* fun calculation to determine the minor of this endpoint */ - minor = (((udev->bus->busnum - 1) * 128) * 16) + (udev->devnum - 1); + retval = endpoint_get_minor(ep_dev); + if (retval) { + dev_err(parent, "can not allocate minor number for %s", + ep_dev->dev.bus_id); + goto error_register; + } ep_dev->desc = &endpoint->desc; ep_dev->udev = udev; - ep_dev->dev.devt = MKDEV(442, minor); // FIXME fake number... + ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor); ep_dev->dev.class = ep_class->class; ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; @@ -241,7 +308,7 @@ int usb_create_ep_files(struct device *parent, retval = device_register(&ep_dev->dev); if (retval) - goto error_register; + goto error_chrdev; retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); if (retval) goto error_group; @@ -261,6 +328,9 @@ error_group: destroy_endpoint_class(); return retval; +error_chrdev: + endpoint_free_minor(ep_dev); + error_register: kfree(ep_dev); error_alloc: @@ -271,14 +341,16 @@ exit: void usb_remove_ep_files(struct usb_host_endpoint *endpoint) { + struct ep_device *ep_dev = endpoint->ep_dev; - if (endpoint->ep_dev) { + if (ep_dev) { char name[8]; sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress); - sysfs_remove_link(&endpoint->ep_dev->dev.parent->kobj, name); - sysfs_remove_group(&endpoint->ep_dev->dev.kobj, &ep_dev_attr_grp); - device_unregister(&endpoint->ep_dev->dev); + sysfs_remove_link(&ep_dev->dev.parent->kobj, name); + sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp); + endpoint_free_minor(ep_dev); + device_unregister(&ep_dev->dev); endpoint->ep_dev = NULL; destroy_endpoint_class(); } -- cgit v1.2.3-70-g09d2 From 958e8741bf9ff5d0f0b82b7cef578e96c764a288 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Apr 2002 12:14:34 -0700 Subject: USB: add driver for the USB debug devices It's a simple usb-serial driver that just creates a tty device to read and write from. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 11 +++++++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/usb_debug.c | 65 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 77 insertions(+) create mode 100644 drivers/usb/serial/usb_debug.c (limited to 'drivers') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 2a8dd4cc943..2f4d303ee36 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -554,6 +554,17 @@ config USB_SERIAL_OMNINET To compile this driver as a module, choose M here: the module will be called omninet. +config USB_SERIAL_DEBUG + tristate "USB Debugging Device" + depends on USB_SERIAL + help + Say Y here if you have a USB debugging device used to recieve + debugging data from another machine. The most common of these + devices is the NetChip TurboCONNECT device. + + To compile this driver as a module, choose M here: the + module will be called usb-debug. + config USB_EZUSB bool depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index a5047dc599b..61166ad450e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o +obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT) += digi_acceleport.o obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c new file mode 100644 index 00000000000..257a5e43687 --- /dev/null +++ b/drivers/usb/serial/usb_debug.c @@ -0,0 +1,65 @@ +/* + * USB Debug cable driver + * + * Copyright (C) 2006 Greg Kroah-Hartman + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0525, 0x127a) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver debug_driver = { + .name = "debug", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver debug_device = { + .driver = { + .owner = THIS_MODULE, + .name = "debug", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, +}; + +static int __init debug_init(void) +{ + int retval; + + retval = usb_serial_register(&debug_device); + if (retval) + return retval; + retval = usb_register(&debug_driver); + if (retval) + usb_serial_deregister(&debug_device); + return retval; +} + +static void __exit debug_exit(void) +{ + usb_deregister(&debug_driver); + usb_serial_deregister(&debug_device); +} + +module_init(debug_init); +module_exit(debug_exit); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From c066475e1fe3b3afbd613ddf5f1eca9be4fb6de0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 11 Aug 2006 01:55:12 -0700 Subject: USB: create a new thread for every USB device found during the probe sequence Might speed up some systems. If nothing else, a bad driver should not take the whole USB subsystem down with it. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/Kconfig | 15 +++++++++ drivers/usb/core/hub.c | 81 +++++++++++++++++++++++++++++++++++------------- 2 files changed, 74 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 6e3b5358a76..f8324d8d06a 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -72,6 +72,21 @@ config USB_SUSPEND If you are unsure about this, say N here. +config USB_MULTITHREAD_PROBE + bool "USB Multi-threaded probe (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + default n + help + Say Y here if you want the USB core to spawn a new thread for + every USB device that is probed. This can cause a small speedup + in boot times on systems with a lot of different USB devices. + + This option should be safe to enable, but if any odd probing + problems are found, please disable it, or dynamically turn it + off in the /sys/module/usbcore/parameters/multithread_probe + file + + When in doubt, say N. config USB_OTG bool diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c961a32f317..f6e69218058 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -87,6 +87,16 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; +/* multithreaded probe logic */ +static int multithread_probe = +#ifdef CONFIG_USB_MULTITHREAD_PROBE + 1; +#else + 0; +#endif +module_param(multithread_probe, bool, S_IRUGO); +MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread"); + /* cycle leds on hubs that aren't blinking for attention */ static int blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); @@ -1238,29 +1248,17 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) static int __usb_port_suspend(struct usb_device *, int port1); #endif -/** - * usb_new_device - perform initial device setup (usbcore-internal) - * @udev: newly addressed device (in ADDRESS state) - * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked either - * the parent hub (if udev is a normal device) or else the - * usb_bus_list_lock (if udev is a root hub). The parent's pointer to - * udev has already been installed, but udev is not yet visible through - * sysfs or other filesystem code. - * - * Returns 0 for success (device is configured and listed, with its - * interfaces, in sysfs); else a negative errno value. - * - * This call is synchronous, and may not be used in an interrupt context. - * - * Only the hub driver or root-hub registrar should ever call this. - */ -int usb_new_device(struct usb_device *udev) +static int __usb_new_device(void *void_data) { + struct usb_device *udev = void_data; int err; + /* Lock ourself into memory in order to keep a probe sequence + * sleeping in a new thread from allowing us to be unloaded. + */ + if (!try_module_get(THIS_MODULE)) + return -EINVAL; + err = usb_get_configuration(udev); if (err < 0) { dev_err(&udev->dev, "can't read configurations, error %d\n", @@ -1356,13 +1354,52 @@ int usb_new_device(struct usb_device *udev) goto fail; } - return 0; +exit: + module_put(THIS_MODULE); + return err; fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); - return err; + goto exit; } +/** + * usb_new_device - perform initial device setup (usbcore-internal) + * @udev: newly addressed device (in ADDRESS state) + * + * This is called with devices which have been enumerated, but not yet + * configured. The device descriptor is available, but not descriptors + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the + * usb_bus_list_lock (if udev is a root hub). The parent's pointer to + * udev has already been installed, but udev is not yet visible through + * sysfs or other filesystem code. + * + * The return value for this function depends on if the + * multithread_probe variable is set or not. If it's set, it will + * return a if the probe thread was successfully created or not. If the + * variable is not set, it will return if the device is configured + * properly or not. interfaces, in sysfs); else a negative errno value. + * + * This call is synchronous, and may not be used in an interrupt context. + * + * Only the hub driver or root-hub registrar should ever call this. + */ +int usb_new_device(struct usb_device *udev) +{ + struct task_struct *probe_task; + int ret = 0; + + if (multithread_probe) { + probe_task = kthread_run(__usb_new_device, udev, + "usb-probe-%s", udev->devnum); + if (IS_ERR(probe_task)) + ret = PTR_ERR(probe_task); + } else + ret = __usb_new_device(udev); + + return ret; +} static int hub_port_status(struct usb_hub *hub, int port1, u16 *status, u16 *change) -- cgit v1.2.3-70-g09d2 From 8c03356a559ced6fa78931f498193f776d67e445 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 9 Nov 2006 14:42:16 -0500 Subject: EHCI: Fix root-hub and port suspend/resume problems This patch (as738b) fixes numerous problems in the controller/root-hub suspend/resume/remote-wakeup support in ehci-hcd: The bus_resume() routine should wake up only the ports that were suspended by bus_suspend(). Ports that were already suspended should remain that way. The interrupt mask is used to detect loss of power in the bus_resume() routine (if the mask is 0 then power was lost). However bus_suspend() always sets the mask to 0. Instead the mask should retain its normal value, with port-change-detect interrupts disabled if remote wakeup is turned off. The interrupt mask should be reset to its correct value at the end of bus_resume() regardless of whether power was lost. bus_resume() reinitializes the operational registers if power was lost. However those registers are not in the aux power well, hence they can lose their values whenever the controller is put into D3. They should always be reinitialized. When a port-change interrupt occurs and the root hub is suspended, the interrupt handler should request a root-hub resume instead of starting up the controller all by itself. There's no need for the interrupt handler to request a root-hub resume every time a suspended port sends a remote-wakeup request. The pci_resume() method doesn't need to check for connected ports when deciding whether or not to reset the controller. It can make that decision based on whether Vaux power was maintained. Even when the controller does not need to be reset, pci_resume() must undo the effect of pci_suspend() by re-enabling the interrupt mask. If power was lost, pci_resume() must not call ehci_run(). At this point the root hub is still supposed to be suspended, not running. It's enough to rewrite the command register and set the configured_flag. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 6 ++-- drivers/usb/host/ehci-hub.c | 67 ++++++++++++++++++++++++++++----------------- drivers/usb/host/ehci-pci.c | 40 +++++++++++---------------- drivers/usb/host/ehci.h | 1 + 4 files changed, 61 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f2ceb5fdbeb..025d3331368 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -619,9 +619,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) unsigned i = HCS_N_PORTS (ehci->hcs_params); /* resume root hub? */ - status = readl (&ehci->regs->command); - if (!(status & CMD_RUN)) - writel (status | CMD_RUN, &ehci->regs->command); + if (!(readl(&ehci->regs->command) & CMD_RUN)) + usb_hcd_resume_root_hub(hcd); while (i--) { int pstatus = readl (&ehci->regs->port_status [i]); @@ -638,7 +637,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) */ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); - usb_hcd_resume_root_hub(hcd); } } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 0a56dfa2745..bfe5f307cba 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -34,6 +34,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int port; + int mask; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -51,14 +52,25 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci->reclaim_ready = 1; ehci_work(ehci); - /* suspend any active/unsuspended ports, maybe allow wakeup */ + /* Unlike other USB host controller types, EHCI doesn't have + * any notion of "global" or bus-wide suspend. The driver has + * to manually suspend all the active unsuspended ports, and + * then manually resume them in the bus_resume() routine. + */ + ehci->bus_suspended = 0; while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; u32 t1 = readl (reg) & ~PORT_RWC_BITS; u32 t2 = t1; - if ((t1 & PORT_PE) && !(t1 & PORT_OWNER)) + /* keep track of which ports we suspend */ + if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) && + !(t1 & PORT_SUSPEND)) { t2 |= PORT_SUSPEND; + set_bit(port, &ehci->bus_suspended); + } + + /* enable remote wakeup on all ports */ if (device_may_wakeup(&hcd->self.root_hub->dev)) t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E; else @@ -76,6 +88,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci_halt (ehci); hcd->state = HC_STATE_SUSPENDED; + /* allow remote wakeup */ + mask = INTR_MASK; + if (!device_may_wakeup(&hcd->self.root_hub->dev)) + mask &= ~STS_PCD; + writel(mask, &ehci->regs->intr_enable); + readl(&ehci->regs->intr_enable); + ehci->next_statechange = jiffies + msecs_to_jiffies(10); spin_unlock_irq (&ehci->lock); return 0; @@ -88,7 +107,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; int i; - int intr_enable; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -100,31 +118,30 @@ static int ehci_bus_resume (struct usb_hcd *hcd) * the last user of the controller, not reset/pm hardware keeping * state we gave to it. */ + temp = readl(&ehci->regs->intr_enable); + ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss"); - /* re-init operational registers in case we lost power */ - if (readl (&ehci->regs->intr_enable) == 0) { - /* at least some APM implementations will try to deliver - * IRQs right away, so delay them until we're ready. - */ - intr_enable = 1; - writel (0, &ehci->regs->segment); - writel (ehci->periodic_dma, &ehci->regs->frame_list); - writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next); - } else - intr_enable = 0; - ehci_dbg(ehci, "resume root hub%s\n", - intr_enable ? " after power loss" : ""); + /* at least some APM implementations will try to deliver + * IRQs right away, so delay them until we're ready. + */ + writel(0, &ehci->regs->intr_enable); + + /* re-init operational registers */ + writel(0, &ehci->regs->segment); + writel(ehci->periodic_dma, &ehci->regs->frame_list); + writel((u32) ehci->async->qh_dma, &ehci->regs->async_next); /* restore CMD_RUN, framelist size, and irq threshold */ writel (ehci->command, &ehci->regs->command); - /* take ports out of suspend */ + /* manually resume the ports we suspended during bus_suspend() */ i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = readl (&ehci->regs->port_status [i]); temp &= ~(PORT_RWC_BITS | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E); - if (temp & PORT_SUSPEND) { + if (test_bit(i, &ehci->bus_suspended) && + (temp & PORT_SUSPEND)) { ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); temp |= PORT_RESUME; } @@ -134,11 +151,12 @@ static int ehci_bus_resume (struct usb_hcd *hcd) mdelay (20); while (i--) { temp = readl (&ehci->regs->port_status [i]); - if ((temp & PORT_SUSPEND) == 0) - continue; - temp &= ~(PORT_RWC_BITS | PORT_RESUME); - writel (temp, &ehci->regs->port_status [i]); - ehci_vdbg (ehci, "resumed port %d\n", i + 1); + if (test_bit(i, &ehci->bus_suspended) && + (temp & PORT_SUSPEND)) { + temp &= ~(PORT_RWC_BITS | PORT_RESUME); + writel (temp, &ehci->regs->port_status [i]); + ehci_vdbg (ehci, "resumed port %d\n", i + 1); + } } (void) readl (&ehci->regs->command); @@ -157,8 +175,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; /* Now we can safely re-enable irqs */ - if (intr_enable) - writel (INTR_MASK, &ehci->regs->intr_enable); + writel(INTR_MASK, &ehci->regs->intr_enable); spin_unlock_irq (&ehci->lock); return 0; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index e51c1ed81ac..4bc7970ba3e 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -257,9 +257,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message) static int ehci_pci_resume(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - unsigned port; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - int retval = -EINVAL; // maybe restore FLADJ @@ -269,27 +267,19 @@ static int ehci_pci_resume(struct usb_hcd *hcd) /* Mark hardware accessible again as we are out of D3 state by now */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - /* If CF is clear, we lost PCI Vaux power and need to restart. */ - if (readl(&ehci->regs->configured_flag) != FLAG_CF) - goto restart; - - /* If any port is suspended (or owned by the companion), - * we know we can/must resume the HC (and mustn't reset it). - * We just defer that to the root hub code. + /* If CF is still set, we maintained PCI Vaux power. + * Just undo the effect of ehci_pci_suspend(). */ - for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) { - u32 status; - port--; - status = readl(&ehci->regs->port_status [port]); - if (!(status & PORT_POWER)) - continue; - if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) { - usb_hcd_resume_root_hub(hcd); - return 0; - } + if (readl(&ehci->regs->configured_flag) == FLAG_CF) { + int mask = INTR_MASK; + + if (!device_may_wakeup(&hcd->self.root_hub->dev)) + mask &= ~STS_PCD; + writel(mask, &ehci->regs->intr_enable); + readl(&ehci->regs->intr_enable); + return 0; } -restart: ehci_dbg(ehci, "lost power, restarting\n"); usb_root_hub_lost_power(hcd->self.root_hub); @@ -307,13 +297,15 @@ restart: ehci_work(ehci); spin_unlock_irq(&ehci->lock); - /* restart; khubd will disconnect devices */ - retval = ehci_run(hcd); - /* here we "know" root ports should always stay powered */ ehci_port_power(ehci, 1); - return retval; + writel(ehci->command, &ehci->regs->command); + writel(FLAG_CF, &ehci->regs->configured_flag); + readl(&ehci->regs->command); /* unblock posted writes */ + + hcd->state = HC_STATE_SUSPENDED; + return 0; } #endif diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bbc3082a73d..74dbc6c8228 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -74,6 +74,7 @@ struct ehci_hcd { /* one per controller */ /* per root hub port */ unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; + unsigned long bus_suspended; /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ -- cgit v1.2.3-70-g09d2 From 40f122f343797d02390c5a157372cac0c5b50bb7 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 9 Nov 2006 14:44:33 -0500 Subject: USB: Add autosuspend support to the hub driver This patch (as742b) adds autosuspend/autoresume support to the USB hub driver. The largest aspect of the change is that we no longer need a special flag for root hubs that want to be resumed. Now every hub is autoresumed whenever khubd needs to access it. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++++------------------- 1 file changed, 26 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f6e69218058..55812a5ac66 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -65,7 +65,6 @@ struct usb_hub { unsigned limited_power:1; unsigned quiescing:1; unsigned activating:1; - unsigned resume_root_hub:1; unsigned has_indicators:1; u8 indicator[USB_MAXCHILDREN]; @@ -328,6 +327,9 @@ static void kick_khubd(struct usb_hub *hub) { unsigned long flags; + /* Suppress autosuspend until khubd runs */ + to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; + spin_lock_irqsave(&hub_event_lock, flags); if (list_empty(&hub->event_list)) { list_add_tail(&hub->event_list, &hub_event_list); @@ -509,7 +511,6 @@ static void hub_quiesce(struct usb_hub *hub) /* (nonblocking) khubd and related activity won't re-trigger */ hub->quiescing = 1; hub->activating = 0; - hub->resume_root_hub = 0; /* (blocking) stop khubd and related activity */ usb_kill_urb(hub->urb); @@ -525,7 +526,7 @@ static void hub_activate(struct usb_hub *hub) hub->quiescing = 0; hub->activating = 1; - hub->resume_root_hub = 0; + status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) dev_err(hub->intfdev, "activate --> %d\n", status); @@ -940,6 +941,7 @@ descriptor_error: INIT_WORK(&hub->leds, led_work, hub); usb_set_intfdata (intf, hub); + intf->needs_remote_wakeup = 1; if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs++; @@ -1938,6 +1940,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) } } + dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + /* "global suspend" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; @@ -1960,10 +1964,12 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) static int hub_resume(struct usb_interface *intf) { - struct usb_device *hdev = interface_to_usbdev(intf); struct usb_hub *hub = usb_get_intfdata (intf); + struct usb_device *hdev = hub->hdev; int status; + dev_dbg(&intf->dev, "%s\n", __FUNCTION__); + /* "global resume" of the downstream HC-to-USB interface */ if (!hdev->parent) { struct usb_bus *bus = hdev->bus; @@ -2002,7 +2008,6 @@ void usb_resume_root_hub(struct usb_device *hdev) { struct usb_hub *hub = hdev_to_hub(hdev); - hub->resume_root_hub = 1; kick_khubd(hub); } @@ -2639,16 +2644,13 @@ static void hub_events(void) intf = to_usb_interface(hub->intfdev); hub_dev = &intf->dev; - i = hub->resume_root_hub; - - dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n", + dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n", hdev->state, hub->descriptor ? hub->descriptor->bNbrPorts : 0, /* NOTE: expects max 15 ports... */ (u16) hub->change_bits[0], - (u16) hub->event_bits[0], - i ? ", resume root" : ""); + (u16) hub->event_bits[0]); usb_get_intf(intf); spin_unlock_irq(&hub_event_lock); @@ -2669,16 +2671,16 @@ static void hub_events(void) goto loop; } - /* Is this is a root hub wanting to reactivate the downstream - * ports? If so, be sure the interface resumes even if its - * stub "device" node was never suspended. - */ - if (i) - usb_autoresume_device(hdev, 0); + /* Autoresume */ + ret = usb_autopm_get_interface(intf); + if (ret) { + dev_dbg(hub_dev, "Can't autoresume: %d\n", ret); + goto loop; + } - /* If this is an inactive or suspended hub, do nothing */ + /* If this is an inactive hub, do nothing */ if (hub->quiescing) - goto loop; + goto loop_autopm; if (hub->error) { dev_dbg (hub_dev, "resetting for error %d\n", @@ -2688,7 +2690,7 @@ static void hub_events(void) if (ret) { dev_dbg (hub_dev, "error resetting hub: %d\n", ret); - goto loop; + goto loop_autopm; } hub->nerrors = 0; @@ -2816,6 +2818,10 @@ static void hub_events(void) if (!hdev->parent && !hub->busy_bits[0]) usb_enable_root_hub_irq(hdev->bus); +loop_autopm: + /* Allow autosuspend if we're not going to run again */ + if (list_empty(&hub->event_list)) + usb_autopm_enable(intf); loop: usb_unlock_device(hdev); usb_put_intf(intf); @@ -2857,6 +2863,7 @@ static struct usb_driver hub_driver = { .post_reset = hub_post_reset, .ioctl = hub_ioctl, .id_table = hub_id_table, + .supports_autosuspend = 1, }; int usb_hub_init(void) -- cgit v1.2.3-70-g09d2 From 1f9fc882d92f3ff390455836f98d7ddc36d4e4c3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Nov 2006 11:06:59 -0500 Subject: OHCI: make autostop conditional on CONFIG_PM Unlike UHCI, OHCI does not exert any DMA load on the system when no devices are connected. Consequently there is no advantage to doing an autostop other than the power savings, so we shouldn't compile the necessary code unless CONFIG_PM is enabled. This patch (as820) makes the root-hub suspend and resume routines conditional on CONFIG_PM. It also prevents autostop from activating if the device_may_wakeup flag isn't set; some people use this flag to alert the driver about Resume-Detect bugs in the hardware. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hub.c | 133 ++++++++++++++++++++++++++------------------ 1 file changed, 79 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 4c9492779ed..2441642cb7b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -56,7 +56,6 @@ static void finish_unlinks (struct ohci_hcd *, u16); #ifdef CONFIG_PM static int ohci_restart(struct ohci_hcd *ohci); -#endif static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop) __releases(ohci->lock) @@ -187,7 +186,6 @@ __acquires(ohci->lock) ohci_dbg (ohci, "lost power\n"); status = -EBUSY; } -#ifdef CONFIG_PM if (status == -EBUSY) { if (!autostopped) { spin_unlock_irq (&ohci->lock); @@ -197,7 +195,6 @@ __acquires(ohci->lock) } return status; } -#endif if (status != -EINPROGRESS) return status; if (autostopped) @@ -291,8 +288,6 @@ skip_resume: return 0; } -#ifdef CONFIG_PM - static int ohci_bus_suspend (struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -330,6 +325,83 @@ static int ohci_bus_resume (struct usb_hcd *hcd) return rc; } +/* Carry out polling-, autostop-, and autoresume-related state changes */ +static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, + int any_connected) +{ + int poll_rh = 1; + + switch (ohci->hc_control & OHCI_CTRL_HCFS) { + + case OHCI_USB_OPER: + /* keep on polling until we know a device is connected + * and RHSC is enabled */ + if (!ohci->autostop) { + if (any_connected || + !device_may_wakeup(&ohci_to_hcd(ohci) + ->self.root_hub->dev)) { + if (ohci_readl(ohci, &ohci->regs->intrenable) & + OHCI_INTR_RHSC) + poll_rh = 0; + } else { + ohci->autostop = 1; + ohci->next_statechange = jiffies + HZ; + } + + /* if no devices have been attached for one second, autostop */ + } else { + if (changed || any_connected) { + ohci->autostop = 0; + ohci->next_statechange = jiffies + + STATECHANGE_DELAY; + } else if (time_after_eq(jiffies, + ohci->next_statechange) + && !ohci->ed_rm_list + && !(ohci->hc_control & + OHCI_SCHED_ENABLES)) { + ohci_rh_suspend(ohci, 1); + } + } + break; + + /* if there is a port change, autostart or ask to be resumed */ + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + if (changed) { + if (ohci->autostop) + ohci_rh_resume(ohci); + else + usb_hcd_resume_root_hub(ohci_to_hcd(ohci)); + } else { + /* everything is idle, no need for polling */ + poll_rh = 0; + } + break; + } + return poll_rh; +} + +#else /* CONFIG_PM */ + +static inline int ohci_rh_resume(struct ohci_hcd *ohci) +{ + return 0; +} + +/* Carry out polling-related state changes. + * autostop isn't used when CONFIG_PM is turned off. + */ +static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, + int any_connected) +{ + int poll_rh = 1; + + /* keep on polling until RHSC is enabled */ + if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) + poll_rh = 0; + return poll_rh; +} + #endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -382,55 +454,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) } } - hcd->poll_rh = 1; - - /* carry out appropriate state changes */ - switch (ohci->hc_control & OHCI_CTRL_HCFS) { - - case OHCI_USB_OPER: - /* keep on polling until we know a device is connected - * and RHSC is enabled */ - if (!ohci->autostop) { - if (any_connected) { - if (ohci_readl(ohci, &ohci->regs->intrenable) & - OHCI_INTR_RHSC) - hcd->poll_rh = 0; - } else { - ohci->autostop = 1; - ohci->next_statechange = jiffies + HZ; - } - - /* if no devices have been attached for one second, autostop */ - } else { - if (changed || any_connected) { - ohci->autostop = 0; - ohci->next_statechange = jiffies + - STATECHANGE_DELAY; - } else if (device_may_wakeup(&hcd->self.root_hub->dev) - && time_after_eq(jiffies, - ohci->next_statechange) - && !ohci->ed_rm_list - && !(ohci->hc_control & - OHCI_SCHED_ENABLES)) { - ohci_rh_suspend (ohci, 1); - } - } - break; - - /* if there is a port change, autostart or ask to be resumed */ - case OHCI_USB_SUSPEND: - case OHCI_USB_RESUME: - if (changed) { - if (ohci->autostop) - ohci_rh_resume (ohci); - else - usb_hcd_resume_root_hub (hcd); - } else { - /* everything is idle, no need for polling */ - hcd->poll_rh = 0; - } - break; - } + hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed, + any_connected); done: spin_unlock_irqrestore (&ohci->lock, flags); -- cgit v1.2.3-70-g09d2 From ce3615879ae85373c03744b45b7c2d7ae5e29b2a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Nov 2006 11:12:22 -0500 Subject: USB: struct usb_device: change flag to bitflag This patch (as816) changes an existing flag in the usb_device structure to a bitflag, preparing the way for more bitflags to come in the future. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 2 +- include/linux/usb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 7729c074488..5684d872292 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -764,7 +764,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) err = -EINVAL; goto errout; } else { - dev->have_langid = -1; + dev->have_langid = 1; dev->string_langid = tbuf[2] | (tbuf[3]<< 8); /* always use the first langid listed */ dev_dbg (&dev->dev, "default language 0x%04x\n", diff --git a/include/linux/usb.h b/include/linux/usb.h index 864c6c21c21..5634a2d91ec 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -362,7 +362,7 @@ struct usb_device { u8 portnum; /* Parent port number (origin 1) */ u8 level; /* Number of USB hub ancestors */ - int have_langid; /* whether string_langid is valid */ + unsigned have_langid:1; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ /* static strings from the device */ -- cgit v1.2.3-70-g09d2 From d25450c68767481f7c9cc4823a6da8235db40be6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Nov 2006 11:14:30 -0500 Subject: USB hub: simplify remote-wakeup handling This patch (as817) simplifies the remote-wakeup processing in the hub driver. Now instead of using a specialized code path, it relies on the standard USB resume routines. The hub_port_resume() function does an initial get_port_status() to see whether the port has already resumed itself (as it does when a remote-wakeup request is sent). This will slow down handling of other resume events slightly, but not enough to matter. The patch also changes the hub_port_status() routine, making it return an error if a short reply is received. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 43 ++++++++++++++++++++----------------------- 1 file changed, 20 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 55812a5ac66..46df5e60764 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1409,10 +1409,12 @@ static int hub_port_status(struct usb_hub *hub, int port1, int ret; ret = get_port_status(hub->hdev, port1, &hub->status->port); - if (ret < 0) + if (ret < 4) { dev_err (hub->intfdev, "%s failed (err = %d)\n", __FUNCTION__, ret); - else { + if (ret >= 0) + ret = -EIO; + } else { *status = le16_to_cpu(hub->status->port.wPortStatus); *change = le16_to_cpu(hub->status->port.wPortChange); ret = 0; @@ -1760,6 +1762,12 @@ static int hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) { int status; + u16 portchange, portstatus; + + /* Skip the initial Clear-Suspend step for a remote wakeup */ + status = hub_port_status(hub, port1, &portstatus, &portchange); + if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND)) + goto SuspendCleared; // dev_dbg(hub->intfdev, "resume port %d\n", port1); @@ -1773,9 +1781,6 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) "can't resume port %d, status %d\n", port1, status); } else { - u16 devstatus; - u16 portchange; - /* drive resume for at least 20 msec */ if (udev) dev_dbg(&udev->dev, "usb %sresume\n", @@ -1790,16 +1795,15 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) * stop resume signaling. Then finish the resume * sequence. */ - devstatus = portchange = 0; - status = hub_port_status(hub, port1, - &devstatus, &portchange); + status = hub_port_status(hub, port1, &portstatus, &portchange); +SuspendCleared: if (status < 0 - || (devstatus & LIVE_FLAGS) != LIVE_FLAGS - || (devstatus & USB_PORT_STAT_SUSPEND) != 0 + || (portstatus & LIVE_FLAGS) != LIVE_FLAGS + || (portstatus & USB_PORT_STAT_SUSPEND) != 0 ) { dev_dbg(hub->intfdev, "port %d status %04x.%04x after resume, %d\n", - port1, portchange, devstatus, status); + port1, portchange, portstatus, status); if (status >= 0) status = -ENODEV; } else { @@ -1860,23 +1864,16 @@ static int remote_wakeup(struct usb_device *udev) { int status = 0; - /* All this just to avoid sending a port-resume message - * to the parent hub! */ - usb_lock_device(udev); - usb_pm_lock(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - /* TRSMRCY = 10 msec */ - msleep(10); - status = finish_port_resume(udev); + status = usb_autoresume_device(udev, 1); + + /* Give the interface drivers a chance to do something, + * then autosuspend the device again. */ if (status == 0) - udev->dev.power.power_state.event = PM_EVENT_ON; + usb_autosuspend_device(udev, 1); } - usb_pm_unlock(udev); - - if (status == 0) - usb_autoresume_device(udev, 0); usb_unlock_device(udev); return status; } -- cgit v1.2.3-70-g09d2 From ee49fb5dc89d34f1794ac9362fa97c1a640f7ddd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 22 Nov 2006 16:55:54 -0500 Subject: USB: keep count of unsuspended children This patch (as818b) simplifies autosuspend processing by keeping track of the number of unsuspended children of each USB hub. This will permit us to avoid a good deal of unnecessary work all the time; we will no longer have to create a bunch of workqueue entries to carry out autosuspend requests, only to have them fail because one of the hub's children isn't suspended. The basic idea is simple. There already is a usage counter in the usb_device structure for preventing autosuspends. The patch just increments that counter for every unsuspended child. There's only one tricky part: When a device disconnects we need to remember whether it was suspended at the time (leave the counter alone) or not (decrement the counter). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 34 +++++++++++++++++++++++----------- drivers/usb/core/hub.c | 14 ++++++++++++++ include/linux/usb.h | 1 + 3 files changed, 38 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 40c1bf09b2b..0fa15bd62c4 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1048,7 +1048,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) /* If the suspend succeeded, propagate it up the tree */ } else if (parent) - usb_autosuspend_device(parent, 0); + usb_autosuspend_device(parent, 1); // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; @@ -1096,9 +1096,25 @@ int usb_resume_both(struct usb_device *udev) /* Propagate the resume up the tree, if necessary */ if (udev->state == USB_STATE_SUSPENDED) { if (parent) { - usb_pm_lock(parent); - parent->auto_pm = 1; - status = usb_resume_both(parent); + status = usb_autoresume_device(parent, 1); + if (status == 0) { + status = usb_resume_device(udev); + if (status) { + usb_autosuspend_device(parent, 1); + + /* It's possible usb_resume_device() + * failed after the port was + * unsuspended, causing udev to be + * logically disconnected. We don't + * want usb_disconnect() to autosuspend + * the parent again, so tell it that + * udev disconnected while still + * suspended. */ + if (udev->state == + USB_STATE_NOTATTACHED) + udev->discon_suspended = 1; + } + } } else { /* We can't progagate beyond the USB subsystem, @@ -1107,11 +1123,9 @@ int usb_resume_both(struct usb_device *udev) if (udev->dev.parent->power.power_state.event != PM_EVENT_ON) status = -EHOSTUNREACH; - } - if (status == 0) - status = usb_resume_device(udev); - if (parent) - usb_pm_unlock(parent); + else + status = usb_resume_device(udev); + } } else { /* Needed only for setting udev->dev.power.power_state.event @@ -1119,8 +1133,6 @@ int usb_resume_both(struct usb_device *udev) status = usb_resume_device(udev); } - /* Now the parent won't suspend until we are finished */ - if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 46df5e60764..e46d38b1824 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1039,6 +1039,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev) if (udev->children[i]) recursively_mark_NOTATTACHED(udev->children[i]); } + if (udev->state == USB_STATE_SUSPENDED) + udev->discon_suspended = 1; udev->state = USB_STATE_NOTATTACHED; } @@ -1228,6 +1230,14 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); + /* Decrement the parent's count of unsuspended children */ + if (udev->parent) { + usb_pm_lock(udev); + if (!udev->discon_suspended) + usb_autosuspend_device(udev->parent, 1); + usb_pm_unlock(udev); + } + put_device(&udev->dev); } @@ -1356,6 +1366,10 @@ static int __usb_new_device(void *void_data) goto fail; } + /* Increment the parent's count of unsuspended children */ + if (udev->parent) + usb_autoresume_device(udev->parent, 1); + exit: module_put(THIS_MODULE); return err; diff --git a/include/linux/usb.h b/include/linux/usb.h index 5634a2d91ec..0cd73edeef1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -362,6 +362,7 @@ struct usb_device { u8 portnum; /* Parent port number (origin 1) */ u8 level; /* Number of USB hub ancestors */ + unsigned discon_suspended:1; /* Disconnected while suspended */ unsigned have_langid:1; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ -- cgit v1.2.3-70-g09d2 From 94fcda1f8ab5e0cacc381c5ca1cc9aa6ad523576 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Nov 2006 11:38:46 -0500 Subject: usbcore: remove unused argument in autosuspend Thanks to several earlier patches, usb_autosuspend_device() and usb_autoresume_device() are never called with a second argument other than 1. This patch (as819) removes the now-redundant argument. It also consolidates some common code between those two routines, putting it into a new subroutine called usb_autopm_do_device(). And it includes a sizable kerneldoc update for the affected functions. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 4 +- drivers/usb/core/driver.c | 102 +++++++++++++++++++++++++-------------------- drivers/usb/core/hub.c | 12 +++--- drivers/usb/core/message.c | 6 +-- drivers/usb/core/usb.h | 9 ++-- 5 files changed, 71 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index fed92be63b5..3ed4cb2d56d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -561,7 +561,7 @@ static int usbdev_open(struct inode *inode, struct file *file) dev = inode->i_private; if (!dev) goto out; - ret = usb_autoresume_device(dev, 1); + ret = usb_autoresume_device(dev); if (ret) goto out; @@ -609,7 +609,7 @@ static int usbdev_release(struct inode *inode, struct file *file) releaseintf(ps, ifnum); } destroy_all_async(ps); - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); usb_unlock_device(dev); usb_put_dev(dev); put_pid(ps->disc_pid); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 0fa15bd62c4..d6eb5ce1dd1 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -205,7 +205,7 @@ static int usb_probe_interface(struct device *dev) if (id) { dev_dbg(dev, "%s - got id\n", __FUNCTION__); - error = usb_autoresume_device(udev, 1); + error = usb_autoresume_device(udev); if (error) return error; @@ -229,7 +229,7 @@ static int usb_probe_interface(struct device *dev) } else intf->condition = USB_INTERFACE_BOUND; - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); } return error; @@ -247,7 +247,7 @@ static int usb_unbind_interface(struct device *dev) /* Autoresume for set_interface call below */ udev = interface_to_usbdev(intf); - error = usb_autoresume_device(udev, 1); + error = usb_autoresume_device(udev); /* release all urbs for this interface */ usb_disable_interface(interface_to_usbdev(intf), intf); @@ -265,7 +265,7 @@ static int usb_unbind_interface(struct device *dev) intf->needs_remote_wakeup = 0; if (!error) - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); return 0; } @@ -940,6 +940,8 @@ done: return status; } +#ifdef CONFIG_USB_SUSPEND + /* Internal routine to check whether we may autosuspend a device. */ static int autosuspend_check(struct usb_device *udev) { @@ -970,6 +972,12 @@ static int autosuspend_check(struct usb_device *udev) return 0; } +#else + +#define autosuspend_check(udev) 0 + +#endif + /** * usb_suspend_both - suspend a USB device and its interfaces * @udev: the usb_device to suspend @@ -1048,7 +1056,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) /* If the suspend succeeded, propagate it up the tree */ } else if (parent) - usb_autosuspend_device(parent, 1); + usb_autosuspend_device(parent); // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; @@ -1096,11 +1104,11 @@ int usb_resume_both(struct usb_device *udev) /* Propagate the resume up the tree, if necessary */ if (udev->state == USB_STATE_SUSPENDED) { if (parent) { - status = usb_autoresume_device(parent, 1); + status = usb_autoresume_device(parent); if (status == 0) { status = usb_resume_device(udev); if (status) { - usb_autosuspend_device(parent, 1); + usb_autosuspend_device(parent); /* It's possible usb_resume_device() * failed after the port was @@ -1146,39 +1154,53 @@ int usb_resume_both(struct usb_device *udev) #ifdef CONFIG_USB_SUSPEND +/* Internal routine to adjust a device's usage counter and change + * its autosuspend state. + */ +static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) +{ + int status = 0; + + usb_pm_lock(udev); + udev->pm_usage_cnt += inc_usage_cnt; + WARN_ON(udev->pm_usage_cnt < 0); + if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { + udev->auto_pm = 1; + status = usb_resume_both(udev); + if (status != 0) + udev->pm_usage_cnt -= inc_usage_cnt; + } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + USB_AUTOSUSPEND_DELAY); + usb_pm_unlock(udev); + return status; +} + /** * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces * @udev: the usb_device to autosuspend - * @dec_usage_cnt: flag to decrement @udev's PM-usage counter * * This routine should be called when a core subsystem is finished using * @udev and wants to allow it to autosuspend. Examples would be when * @udev's device file in usbfs is closed or after a configuration change. * - * @dec_usage_cnt should be 1 if the subsystem previously incremented - * @udev's usage counter (such as by passing 1 to usb_autoresume_device); - * otherwise it should be 0. - * - * If the usage counter for @udev or any of its active interfaces is greater - * than 0, the autosuspend request will not be queued. (If an interface - * driver does not support autosuspend then its usage counter is permanently - * positive.) Likewise, if an interface driver requires remote-wakeup - * capability during autosuspend but remote wakeup is disabled, the - * autosuspend will fail. + * @udev's usage counter is decremented. If it or any of the usage counters + * for an active interface is greater than 0, no autosuspend request will be + * queued. (If an interface driver does not support autosuspend then its + * usage counter is permanently positive.) Furthermore, if an interface + * driver requires remote-wakeup capability during autosuspend but remote + * wakeup is disabled, the autosuspend will fail. * * Often the caller will hold @udev's device lock, but this is not * necessary. * * This routine can run only in process context. */ -void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) +void usb_autosuspend_device(struct usb_device *udev) { - usb_pm_lock(udev); - udev->pm_usage_cnt -= dec_usage_cnt; - if (autosuspend_check(udev) == 0) - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - USB_AUTOSUSPEND_DELAY); - usb_pm_unlock(udev); + int status; + + status = usb_autopm_do_device(udev, -1); // dev_dbg(&udev->dev, "%s: cnt %d\n", // __FUNCTION__, udev->pm_usage_cnt); } @@ -1186,39 +1208,27 @@ void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt) /** * usb_autoresume_device - immediately autoresume a USB device and its interfaces * @udev: the usb_device to autoresume - * @inc_usage_cnt: flag to increment @udev's PM-usage counter * * This routine should be called when a core subsystem wants to use @udev - * and needs to guarantee that it is not suspended. In addition, the - * caller can prevent @udev from being autosuspended subsequently. (Note - * that this will not prevent suspend events originating in the PM core.) - * Examples would be when @udev's device file in usbfs is opened (autosuspend - * should be prevented until the file is closed) or when a remote-wakeup - * request is received (later autosuspends should not be prevented). + * and needs to guarantee that it is not suspended. No autosuspend will + * occur until usb_autosuspend_device is called. (Note that this will not + * prevent suspend events originating in the PM core.) Examples would be + * when @udev's device file in usbfs is opened or when a remote-wakeup + * request is received. * - * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent - * autosuspends. This prevention will persist until the usage counter is - * decremented again (such as by passing 1 to usb_autosuspend_device). - * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged. - * Regardless, if the autoresume fails then the usage counter is not - * incremented. + * @udev's usage counter is incremented to prevent subsequent autosuspends. + * However if the autoresume fails then the usage counter is re-decremented. * * Often the caller will hold @udev's device lock, but this is not * necessary (and attempting it might cause deadlock). * * This routine can run only in process context. */ -int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt) +int usb_autoresume_device(struct usb_device *udev) { int status; - usb_pm_lock(udev); - udev->pm_usage_cnt += inc_usage_cnt; - udev->auto_pm = 1; - status = usb_resume_both(udev); - if (status != 0) - udev->pm_usage_cnt -= inc_usage_cnt; - usb_pm_unlock(udev); + status = usb_autopm_do_device(udev, 1); // dev_dbg(&udev->dev, "%s: status %d cnt %d\n", // __FUNCTION__, status, udev->pm_usage_cnt); return status; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e46d38b1824..0ce393eb3c4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1234,7 +1234,7 @@ void usb_disconnect(struct usb_device **pdev) if (udev->parent) { usb_pm_lock(udev); if (!udev->discon_suspended) - usb_autosuspend_device(udev->parent, 1); + usb_autosuspend_device(udev->parent); usb_pm_unlock(udev); } @@ -1368,7 +1368,7 @@ static int __usb_new_device(void *void_data) /* Increment the parent's count of unsuspended children */ if (udev->parent) - usb_autoresume_device(udev->parent, 1); + usb_autoresume_device(udev->parent); exit: module_put(THIS_MODULE); @@ -1881,12 +1881,12 @@ static int remote_wakeup(struct usb_device *udev) usb_lock_device(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - status = usb_autoresume_device(udev, 1); + status = usb_autoresume_device(udev); /* Give the interface drivers a chance to do something, * then autosuspend the device again. */ if (status == 0) - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); } usb_unlock_device(udev); return status; @@ -3099,7 +3099,7 @@ int usb_reset_composite_device(struct usb_device *udev, } /* Prevent autosuspend during the reset */ - usb_autoresume_device(udev, 1); + usb_autoresume_device(udev); if (iface && iface->condition != USB_INTERFACE_BINDING) iface = NULL; @@ -3142,7 +3142,7 @@ int usb_reset_composite_device(struct usb_device *udev, } } - usb_autosuspend_device(udev, 1); + usb_autosuspend_device(udev); return ret; } EXPORT_SYMBOL(usb_reset_composite_device); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5684d872292..29b0fa9ff9d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1398,7 +1398,7 @@ free_interfaces: } /* Wake up the device so we can send it the Set-Config request */ - ret = usb_autoresume_device(dev, 1); + ret = usb_autoresume_device(dev); if (ret) goto free_interfaces; @@ -1421,7 +1421,7 @@ free_interfaces: dev->actconfig = cp; if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); goto free_interfaces; } usb_set_device_state(dev, USB_STATE_CONFIGURED); @@ -1490,7 +1490,7 @@ free_interfaces: usb_create_sysfs_intf_files (intf); } - usb_autosuspend_device(dev, 1); + usb_autosuspend_device(dev); return 0; } diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 13322e33f91..17830a81be1 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -64,14 +64,13 @@ static inline void usb_pm_unlock(struct usb_device *udev) {} #define USB_AUTOSUSPEND_DELAY (HZ*2) -extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt); -extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt); +extern void usb_autosuspend_device(struct usb_device *udev); +extern int usb_autoresume_device(struct usb_device *udev); #else -#define usb_autosuspend_device(udev, dec_busy_cnt) do {} while (0) -static inline int usb_autoresume_device(struct usb_device *udev, - int inc_busy_cnt) +#define usb_autosuspend_device(udev) do {} while (0) +static inline int usb_autoresume_device(struct usb_device *udev) { return 0; } -- cgit v1.2.3-70-g09d2