From 9ded96f24c3a5fcbef954e88c443385a1af37eb9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Jan 2006 01:02:07 -0800 Subject: [PATCH] IRQ type flags Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/i2c/chips/tps65010.c | 11 ++++++----- drivers/input/keyboard/corgikbd.c | 6 ++---- drivers/input/keyboard/spitzkbd.c | 27 ++++++++++++++------------- drivers/mfd/ucb1x00-core.c | 5 ++--- drivers/net/smc91x.c | 5 +---- drivers/net/smc91x.h | 18 +++++++++--------- 6 files changed, 34 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index e70b3db69ed..1af3dfbb808 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -494,6 +494,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) { struct tps65010 *tps; int status; + unsigned long irqflags; if (the_tps) { dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME); @@ -520,13 +521,14 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) } #ifdef CONFIG_ARM + irqflags = SA_SAMPLE_RANDOM | SA_TRIGGER_LOW; if (machine_is_omap_h2()) { tps->model = TPS65010; omap_cfg_reg(W4_GPIO58); tps->irq = OMAP_GPIO_IRQ(58); omap_request_gpio(58); omap_set_gpio_direction(58, 1); - set_irq_type(tps->irq, IRQT_FALLING); + irqflags |= SA_TRIGGER_FALLING; } if (machine_is_omap_osk()) { tps->model = TPS65010; @@ -534,7 +536,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)); omap_request_gpio(OMAP_MPUIO(1)); omap_set_gpio_direction(OMAP_MPUIO(1), 1); - set_irq_type(tps->irq, IRQT_FALLING); + irqflags |= SA_TRIGGER_FALLING; } if (machine_is_omap_h3()) { tps->model = TPS65013; @@ -542,13 +544,12 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) // FIXME set up this board's IRQ ... } #else -#define set_irq_type(num,trigger) do{}while(0) + irqflags = SA_SAMPLE_RANDOM; #endif if (tps->irq > 0) { - set_irq_type(tps->irq, IRQT_LOW); status = request_irq(tps->irq, tps65010_irq, - SA_SAMPLE_RANDOM, DRIVER_NAME, tps); + irqflags, DRIVER_NAME, tps); if (status < 0) { dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n", tps->irq, status); diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index 64672d49122..e301ee4ca26 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -343,10 +342,9 @@ static int __init corgikbd_probe(struct platform_device *pdev) for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) { pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN); if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt, - SA_INTERRUPT, "corgikbd", corgikbd)) + SA_INTERRUPT | SA_TRIGGER_RISING, + "corgikbd", corgikbd)) printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i); - else - set_irq_type(CORGI_IRQ_GPIO_KEY_SENSE(i),IRQT_RISING); } /* Set Strobe lines as outputs - set high */ diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 6a15fe3bc52..83999d58312 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -407,10 +406,9 @@ static int __init spitzkbd_probe(struct platform_device *dev) for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) { pxa_gpio_mode(spitz_senses[i] | GPIO_IN); if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt, - SA_INTERRUPT, "Spitzkbd Sense", spitzkbd)) + SA_INTERRUPT|SA_TRIGGER_RISING, + "Spitzkbd Sense", spitzkbd)) printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i); - else - set_irq_type(IRQ_GPIO(spitz_senses[i]),IRQT_RISING); } /* Set Strobe lines as outputs - set high */ @@ -422,15 +420,18 @@ static int __init spitzkbd_probe(struct platform_device *dev) pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN); pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN); - request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd Sync", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd PwrOn", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWA", spitzkbd); - request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWB", spitzkbd); - - set_irq_type(SPITZ_IRQ_GPIO_SYNC, IRQT_BOTHEDGE); - set_irq_type(SPITZ_IRQ_GPIO_ON_KEY, IRQT_BOTHEDGE); - set_irq_type(SPITZ_IRQ_GPIO_SWA, IRQT_BOTHEDGE); - set_irq_type(SPITZ_IRQ_GPIO_SWB, IRQT_BOTHEDGE); + request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, + SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, + "Spitzkbd Sync", spitzkbd); + request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, + SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, + "Spitzkbd PwrOn", spitzkbd); + request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, + SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, + "Spitzkbd SWA", spitzkbd); + request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, + SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING, + "Spitzkbd SWB", spitzkbd); printk(KERN_INFO "input: Spitz Keyboard Registered\n"); diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index e335d54c465..b42e0fbab59 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -27,7 +27,6 @@ #include #include -#include #include "ucb1x00.h" @@ -507,14 +506,14 @@ static int ucb1x00_probe(struct mcp *mcp) goto err_free; } - ret = request_irq(ucb->irq, ucb1x00_irq, 0, "UCB1x00", ucb); + ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING, + "UCB1x00", ucb); if (ret) { printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", ucb->irq, ret); goto err_free; } - set_irq_type(ucb->irq, IRQT_RISING); mcp_set_drvdata(mcp, ucb); ret = class_device_register(&ucb->cdev); diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 28bf2e69eb5..7ec08127c9d 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -88,7 +88,6 @@ static const char version[] = #include #include -#include #include "smc91x.h" @@ -2007,12 +2006,10 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) } /* Grab the IRQ */ - retval = request_irq(dev->irq, &smc_interrupt, 0, dev->name, dev); + retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev); if (retval) goto err_out; - set_irq_type(dev->irq, SMC_IRQ_TRIGGER_TYPE); - #ifdef SMC_USE_PXA_DMA { int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW, diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 5c2824be4ee..e0efd1964e7 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -90,7 +90,7 @@ __l--; \ } \ } while (0) -#define set_irq_type(irq, type) +#define SMC_IRQ_FLAGS (0) #elif defined(CONFIG_SA1100_PLEB) /* We can only do 16-bit reads and writes in the static memory space. */ @@ -109,7 +109,7 @@ #define SMC_outw(v, a, r) writew(v, (a) + (r)) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) -#define set_irq_type(irq, type) do {} while (0) +#define SMC_IRQ_FLAGS (0) #elif defined(CONFIG_SA1100_ASSABET) @@ -185,11 +185,11 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #include #include -#define SMC_IRQ_TRIGGER_TYPE (( \ +#define SMC_IRQ_FLAGS (( \ machine_is_omap_h2() \ || machine_is_omap_h3() \ || (machine_is_omap_innovator() && !cpu_is_omap1510()) \ - ) ? IRQT_FALLING : IRQT_RISING) + ) ? SA_TRIGGER_FALLING : SA_TRIGGER_RISING) #elif defined(CONFIG_SH_SH4202_MICRODEV) @@ -209,7 +209,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) #define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) -#define set_irq_type(irq, type) do {} while(0) +#define SMC_IRQ_FLAGS (0) #elif defined(CONFIG_ISA) @@ -237,7 +237,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l) #define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l) -#define set_irq_type(irq, type) do {} while(0) +#define SMC_IRQ_FLAGS (0) #define RPC_LSA_DEFAULT RPC_LED_TX_RX #define RPC_LSB_DEFAULT RPC_LED_100_10 @@ -319,7 +319,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) au_writew(*_p++ , _a); \ } while(0) -#define set_irq_type(irq, type) do {} while (0) +#define SMC_IRQ_FLAGS (0) #else @@ -342,8 +342,8 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #endif -#ifndef SMC_IRQ_TRIGGER_TYPE -#define SMC_IRQ_TRIGGER_TYPE IRQT_RISING +#ifndef SMC_IRQ_FLAGS +#define SMC_IRQ_FLAGS SA_TRIGGER_RISING #endif #ifdef SMC_USE_PXA_DMA -- cgit v1.2.3-70-g09d2