From c6a21ff319947983446e99f90191401241ce9945 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 6 Jul 2014 12:51:22 +0300 Subject: iwlwifi: mvm: fix merge damage Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 9bfb90680cd..98556d03c1e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -303,13 +303,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; } - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT && - !iwlwifi_mod_params.uapsd_disable) { - hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD; - hw->uapsd_queues = IWL_UAPSD_AC_INFO; - hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; - } - hw->sta_data_size = sizeof(struct iwl_mvm_sta); hw->vif_data_size = sizeof(struct iwl_mvm_vif); hw->chanctx_data_size = sizeof(u16); -- cgit v1.2.3-70-g09d2 From 4601879419f94a89fcbf427b4d3bfbf4ce294174 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Wed, 16 Jul 2014 13:24:36 +0300 Subject: iwlwifi: mvm: pass beacons from foreign APs In AP mode, configure the fw to pass beacons from foreign APs, in order to be able to set the ht protection IE properly. Add the same filters in case of GO (which didn't have any configured filter_flags, probably by mistake) Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index 725ba49576b..8b79081d488 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -1072,8 +1072,12 @@ static int iwl_mvm_mac_ctxt_cmd_ap(struct iwl_mvm *mvm, /* Fill the common data for all mac context types */ iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); - /* Also enable probe requests to pass */ - cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_PROBE_REQUEST); + /* + * pass probe requests and beacons from other APs (needed + * for ht protection) + */ + cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_PROBE_REQUEST | + MAC_FILTER_IN_BEACON); /* Fill the data specific for ap mode */ iwl_mvm_mac_ctxt_cmd_fill_ap(mvm, vif, &cmd.ap, @@ -1094,6 +1098,13 @@ static int iwl_mvm_mac_ctxt_cmd_go(struct iwl_mvm *mvm, /* Fill the common data for all mac context types */ iwl_mvm_mac_ctxt_cmd_common(mvm, vif, &cmd, action); + /* + * pass probe requests and beacons from other APs (needed + * for ht protection) + */ + cmd.filter_flags |= cpu_to_le32(MAC_FILTER_IN_PROBE_REQUEST | + MAC_FILTER_IN_BEACON); + /* Fill the data specific for GO mode */ iwl_mvm_mac_ctxt_cmd_fill_ap(mvm, vif, &cmd.go.ap, action == FW_CTXT_ACTION_ADD); -- cgit v1.2.3-70-g09d2 From 474ea9cafc459976827a477f2c30eaf6313cb7c1 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 22 Jul 2014 11:01:52 -0700 Subject: net: bcmgenet: correctly pad short packets Packets shorter than ETH_ZLEN were not padded with zeroes, hence leaking potentially sensitive information. This bug has been present since the driver got accepted in commit 1c1008c793fa46703a2fee469f4235e1c7984333 ("net: bcmgenet: add main driver file"). Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 16281ad2da1..4e615debe47 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1149,6 +1149,11 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev) goto out; } + if (skb_padto(skb, ETH_ZLEN)) { + ret = NETDEV_TX_OK; + goto out; + } + /* set the SKB transmit checksum */ if (priv->desc_64b_en) { ret = bcmgenet_put_tx_csum(dev, skb); -- cgit v1.2.3-70-g09d2 From c01fac1c77a00227f706a1654317023e3f4ac7f0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 23 Jul 2014 15:40:54 +0200 Subject: ath9k: fix aggregation session lockup If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Cc: stable@vger.kernel.org Reported-by: Antonio Quartulli Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 66acb2cbd9d..7c28cb55610 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -887,6 +887,15 @@ ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq, tx_info = IEEE80211_SKB_CB(skb); tx_info->flags &= ~IEEE80211_TX_CTL_CLEAR_PS_FILT; + + /* + * No aggregation session is running, but there may be frames + * from a previous session or a failed attempt in the queue. + * Send them out as normal data frames + */ + if (!tid->active) + tx_info->flags &= ~IEEE80211_TX_CTL_AMPDU; + if (!(tx_info->flags & IEEE80211_TX_CTL_AMPDU)) { bf->bf_state.bf_type = 0; return bf; -- cgit v1.2.3-70-g09d2 From 332cfc823d182d43bfcc80d1ebee7ab79e06ccf3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 23 Jul 2014 08:59:40 +0800 Subject: amd-xgbe: Fix error return code in xgbe_probe() Fix to return a negative error code from the setting real tx queue count error handling case instead of 0. Signed-off-by: Wei Yongjun Acked-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c index c83584a2671..5a1891faba8 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c @@ -339,7 +339,8 @@ static int xgbe_probe(struct platform_device *pdev) /* Calculate the number of Tx and Rx rings to be created */ pdata->tx_ring_count = min_t(unsigned int, num_online_cpus(), pdata->hw_feat.tx_ch_cnt); - if (netif_set_real_num_tx_queues(netdev, pdata->tx_ring_count)) { + ret = netif_set_real_num_tx_queues(netdev, pdata->tx_ring_count); + if (ret) { dev_err(dev, "error setting real tx queue count\n"); goto err_io; } -- cgit v1.2.3-70-g09d2 From dd1d3f8f9920926aa426589e542eed6bf58b7354 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 23 Jul 2014 09:00:35 +0800 Subject: hyperv: Fix error return code in netvsc_init_buf() Fix to return -ENOMEM from the kalloc error handling case instead of 0. Signed-off-by: Wei Yongjun Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 4ed38eaecea..d97d5f39a04 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -378,8 +378,10 @@ static int netvsc_init_buf(struct hv_device *device) net_device->send_section_map = kzalloc(net_device->map_words * sizeof(ulong), GFP_KERNEL); - if (net_device->send_section_map == NULL) + if (net_device->send_section_map == NULL) { + ret = -ENOMEM; goto cleanup; + } goto exit; -- cgit v1.2.3-70-g09d2 From 042d7654ecb68383c392e3c7e86e04de023f65f9 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 23 Jul 2014 22:12:57 +0300 Subject: bnx2x: fix set_setting for some PHYs Allow set_settings() to complete succesfully even if link is not estabilished and port type isn't known yet. Signed-off-by: Yaniv Rosner Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index bd0600cf726..25eddd90f48 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -379,6 +379,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case PORT_FIBRE: case PORT_DA: + case PORT_NONE: if (!(bp->port.supported[0] & SUPPORTED_FIBRE || bp->port.supported[1] & SUPPORTED_FIBRE)) { DP(BNX2X_MSG_ETHTOOL, -- cgit v1.2.3-70-g09d2 From a71e3c37960ce5f9c6a519bc1215e3ba9fa83e75 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 23 Jul 2014 16:47:31 -0300 Subject: net: phy: Set the driver when registering an MDIO bus device mdiobus_register() registers a device which is already bound to a driver. Hence, the driver pointer should be set properly in order to track down the driver associated to the MDIO bus. This will be used to allow ethernet driver to pin down a MDIO bus driver, preventing it from being unloaded while the PHY device is running. Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: Ezequiel Garcia Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 4eaadcfcb0f..203651ebccb 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -255,6 +255,7 @@ int mdiobus_register(struct mii_bus *bus) bus->dev.parent = bus->parent; bus->dev.class = &mdio_bus_class; + bus->dev.driver = bus->parent->driver; bus->dev.groups = NULL; dev_set_name(&bus->dev, "%s", bus->id); -- cgit v1.2.3-70-g09d2 From b3565f278a9babc00032292be489e7fbff4f48d1 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 23 Jul 2014 16:47:32 -0300 Subject: net: phy: Ensure the MDIO bus module is held This commit adds proper module_{get,put} to prevent the MDIO bus module from being unloaded while the phydev is connected. By doing so, we fix a kernel panic produced when a MDIO driver is removed, but the phydev that relies on it is attached and running. Signed-off-by: Ezequiel Garcia Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 35d753d22f7..74a82328dd4 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -575,6 +575,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface) { struct device *d = &phydev->dev; + struct module *bus_module; int err; /* Assume that if there is no driver, that it doesn't @@ -599,6 +600,14 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, return -EBUSY; } + /* Increment the bus module reference count */ + bus_module = phydev->bus->dev.driver ? + phydev->bus->dev.driver->owner : NULL; + if (!try_module_get(bus_module)) { + dev_err(&dev->dev, "failed to get the bus module\n"); + return -EIO; + } + phydev->attached_dev = dev; dev->phydev = phydev; @@ -664,6 +673,10 @@ EXPORT_SYMBOL(phy_attach); void phy_detach(struct phy_device *phydev) { int i; + + if (phydev->bus->dev.driver) + module_put(phydev->bus->dev.driver->owner); + phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; phy_suspend(phydev); -- cgit v1.2.3-70-g09d2 From a3cc465d95c32bfb529f69dee7841ecd67525561 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 24 Jul 2014 16:37:43 +0800 Subject: r8152: fix the checking of the usb speed When the usb speed of the RTL8152 is not high speed, the USB_DEV_STAT[2:1] should be equal to [0 1]. That is, the STAT_SPEED_FULL should be equal to 2. There is a easy way to check the usb speed by the speed field of the struct usb_device. Use it to replace the original metheod. Signed-off-by: Hayes Wang Spotted-by: Andrey Utkin Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 7bad2d31663..3eab74c7c55 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -282,7 +282,7 @@ /* USB_DEV_STAT */ #define STAT_SPEED_MASK 0x0006 #define STAT_SPEED_HIGH 0x0000 -#define STAT_SPEED_FULL 0x0001 +#define STAT_SPEED_FULL 0x0002 /* USB_TX_AGG */ #define TX_AGG_MAX_THRESHOLD 0x03 @@ -2292,9 +2292,8 @@ static void r8152b_exit_oob(struct r8152 *tp) /* rx share fifo credit full threshold */ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT); - ocp_data &= STAT_SPEED_MASK; - if (ocp_data == STAT_SPEED_FULL) { + if (tp->udev->speed == USB_SPEED_FULL || + tp->udev->speed == USB_SPEED_LOW) { /* rx share fifo credit near full threshold */ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_FULL); -- cgit v1.2.3-70-g09d2 From fe26566d8a05151ba1dce75081f6270f73ec4ae1 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Thu, 24 Jul 2014 18:54:47 +0300 Subject: bnx2x: fix crash during TSO tunneling When TSO packet is transmitted additional BD w/o mapping is used to describe the packed. The BD needs special handling in tx completion. kernel: Call Trace: kernel: [] dump_stack+0x19/0x1b kernel: [] warn_slowpath_common+0x61/0x80 kernel: [] warn_slowpath_fmt+0x5c/0x80 kernel: [] ? find_iova+0x4d/0x90 kernel: [] intel_unmap_page.part.36+0x142/0x160 kernel: [] intel_unmap_page+0x26/0x30 kernel: [] bnx2x_free_tx_pkt+0x157/0x2b0 [bnx2x] kernel: [] bnx2x_tx_int+0xac/0x220 [bnx2x] kernel: [] ? read_tsc+0x9/0x20 kernel: [] bnx2x_poll+0xbb/0x3c0 [bnx2x] kernel: [] net_rx_action+0x15a/0x250 kernel: [] __do_softirq+0xf7/0x290 kernel: [] call_softirq+0x1c/0x30 kernel: [] do_softirq+0x55/0x90 kernel: [] irq_exit+0x115/0x120 kernel: [] do_IRQ+0x58/0xf0 kernel: [] common_interrupt+0x6d/0x6d kernel: [] ? clockevents_notify+0x127/0x140 kernel: [] ? cpuidle_enter_state+0x4f/0xc0 kernel: [] cpuidle_idle_call+0xc5/0x200 kernel: [] arch_cpu_idle+0xe/0x30 kernel: [] cpu_startup_entry+0xf5/0x290 kernel: [] start_secondary+0x265/0x27b kernel: ---[ end trace 11aa7726f18d7e80 ]--- Fixes: a848ade408b ("bnx2x: add CSUM and TSO support for encapsulation protocols") Reported-by: Yulong Pei Cc: Michal Schmidt Signed-off-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 9 +++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 4cab09d3f80..8206a293e6b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -346,6 +346,7 @@ struct sw_tx_bd { u8 flags; /* Set on the first BD descriptor when there is a split BD */ #define BNX2X_TSO_SPLIT_BD (1<<0) +#define BNX2X_HAS_SECOND_PBD (1<<1) }; struct sw_rx_page { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 4b875da1c7e..c43e7238de2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -227,6 +227,12 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, --nbd; bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + if (tx_buf->flags & BNX2X_HAS_SECOND_PBD) { + /* Skip second parse bd... */ + --nbd; + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + } + /* TSO headers+data bds share a common mapping. See bnx2x_tx_split() */ if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) { tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd; @@ -3889,6 +3895,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* set encapsulation flag in start BD */ SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_TUNNEL_EXIST, 1); + + tx_buf->flags |= BNX2X_HAS_SECOND_PBD; + nbd++; } else if (xmit_type & XMIT_CSUM) { /* Set PBD in checksum offload case w/o encapsulation */ -- cgit v1.2.3-70-g09d2 From 33cf75656923ff11d67a937a4f8e9344f58cea77 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Fri, 25 Jul 2014 11:49:41 +0530 Subject: can: c_can_platform: Fix raminit, use devm_ioremap() instead of devm_ioremap_resource() The raminit register is shared register for both can0 and can1. Since commit: 32766ff net: can: Convert to use devm_ioremap_resource devm_ioremap_resource() is used to map raminit register. When using both interfaces the mapping for the can1 interface fails, leading to a non functional can interface. Signed-off-by: George Cherian Signed-off-by: Mugunthan V N Cc: linux-stable # >= v3.11 Signed-off-by: Marc Kleine-Budde --- drivers/net/can/c_can/c_can_platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c index 824108cd9fd..12430be6448 100644 --- a/drivers/net/can/c_can/c_can_platform.c +++ b/drivers/net/can/c_can/c_can_platform.c @@ -287,7 +287,8 @@ static int c_can_plat_probe(struct platform_device *pdev) break; } - priv->raminit_ctrlreg = devm_ioremap_resource(&pdev->dev, res); + priv->raminit_ctrlreg = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0) dev_info(&pdev->dev, "control memory is not used for raminit\n"); else -- cgit v1.2.3-70-g09d2 From 8266f5fcf015101fbeb73cbc152c9d208c2baec0 Mon Sep 17 00:00:00 2001 From: David L Stevens Date: Fri, 25 Jul 2014 10:30:11 -0400 Subject: sunvnet: only use connected ports when sending The sunvnet driver doesn't check whether or not a port is connected when transmitting packets, which results in failures if a port fails to connect (e.g., due to a version mismatch). The original code also assumes unnecessarily that the first port is up and a switch, even though there is a flag for switch ports. This patch only matches a port if it is connected, and otherwise uses the switch_port flag to send the packet to a switch port that is up. Signed-off-by: David L Stevens Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index fd411d6e19a..d813bfb1a84 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -610,6 +610,13 @@ static int __vnet_tx_trigger(struct vnet_port *port) return err; } +static inline bool port_is_up(struct vnet_port *vnet) +{ + struct vio_driver_state *vio = &vnet->vio; + + return !!(vio->hs_state & VIO_HS_COMPLETE); +} + struct vnet_port *__tx_port_find(struct vnet *vp, struct sk_buff *skb) { unsigned int hash = vnet_hashfn(skb->data); @@ -617,14 +624,19 @@ struct vnet_port *__tx_port_find(struct vnet *vp, struct sk_buff *skb) struct vnet_port *port; hlist_for_each_entry(port, hp, hash) { + if (!port_is_up(port)) + continue; if (ether_addr_equal(port->raddr, skb->data)) return port; } - port = NULL; - if (!list_empty(&vp->port_list)) - port = list_entry(vp->port_list.next, struct vnet_port, list); - - return port; + list_for_each_entry(port, &vp->port_list, list) { + if (!port->switch_port) + continue; + if (!port_is_up(port)) + continue; + return port; + } + return NULL; } struct vnet_port *tx_port_find(struct vnet *vp, struct sk_buff *skb) -- cgit v1.2.3-70-g09d2 From 545469f7a5d7f7b2a17b74da0a1bd0c1aea2f545 Mon Sep 17 00:00:00 2001 From: Jun Zhao Date: Sat, 26 Jul 2014 00:38:59 +0800 Subject: neighbour : fix ndm_type type error issue ndm_type means L3 address type, in neighbour proxy and vxlan, it's RTN_UNICAST. NDA_DST is for netlink TLV type, hence it's not right value in this context. Signed-off-by: Jun Zhao Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- net/core/neighbour.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index ade33ef8282..9f79192c9aa 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -339,7 +339,7 @@ static int vxlan_fdb_info(struct sk_buff *skb, struct vxlan_dev *vxlan, ndm->ndm_state = fdb->state; ndm->ndm_ifindex = vxlan->dev->ifindex; ndm->ndm_flags = fdb->flags; - ndm->ndm_type = NDA_DST; + ndm->ndm_type = RTN_UNICAST; if (send_eth && nla_put(skb, NDA_LLADDR, ETH_ALEN, &fdb->eth_addr)) goto nla_put_failure; diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 559890b0f0a..ef31fef25e5 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2249,7 +2249,7 @@ static int pneigh_fill_info(struct sk_buff *skb, struct pneigh_entry *pn, ndm->ndm_pad1 = 0; ndm->ndm_pad2 = 0; ndm->ndm_flags = pn->flags | NTF_PROXY; - ndm->ndm_type = NDA_DST; + ndm->ndm_type = RTN_UNICAST; ndm->ndm_ifindex = pn->dev->ifindex; ndm->ndm_state = NUD_NONE; -- cgit v1.2.3-70-g09d2 From 86b7987dd7a8acbaa54a446a73e2431da88b3ca1 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 26 Jul 2014 02:34:31 +0400 Subject: isdn/bas_gigaset: fix a leak on failure path in gigaset_probe() There is a lack of usb_put_dev(udev) on failure path in gigaset_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Tilman Schmidt Signed-off-by: David S. Miller --- drivers/isdn/gigaset/bas-gigaset.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c index c44950d3eb7..b7ae0a0dd5b 100644 --- a/drivers/isdn/gigaset/bas-gigaset.c +++ b/drivers/isdn/gigaset/bas-gigaset.c @@ -2400,6 +2400,7 @@ allocerr: error: freeurbs(cs); usb_set_intfdata(interface, NULL); + usb_put_dev(udev); gigaset_freecs(cs); return rc; } -- cgit v1.2.3-70-g09d2 From 20fbe3ae990fd54fc7d1f889d61958bc8b38f254 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 28 Jul 2014 10:12:34 +0200 Subject: cdc_subset: deal with a device that needs reset for timeout This device needs to be reset to recover from a timeout. Unfortunately this can be handled only at the level of the subdrivers. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/cdc_subset.c | 27 +++++++++++++++++++++++++++ drivers/net/usb/usbnet.c | 8 ++++++-- include/linux/usb/usbnet.h | 3 +++ 3 files changed, 36 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c index 91f0919fe27..3ef411efd86 100644 --- a/drivers/net/usb/cdc_subset.c +++ b/drivers/net/usb/cdc_subset.c @@ -85,9 +85,34 @@ static int always_connected (struct usbnet *dev) * *-------------------------------------------------------------------------*/ +static void m5632_recover(struct usbnet *dev) +{ + struct usb_device *udev = dev->udev; + struct usb_interface *intf = dev->intf; + int r; + + r = usb_lock_device_for_reset(udev, intf); + if (r < 0) + return; + + usb_reset_device(udev); + usb_unlock_device(udev); +} + +static int dummy_prereset(struct usb_interface *intf) +{ + return 0; +} + +static int dummy_postreset(struct usb_interface *intf) +{ + return 0; +} + static const struct driver_info ali_m5632_info = { .description = "ALi M5632", .flags = FLAG_POINTTOPOINT, + .recover = m5632_recover, }; #endif @@ -332,6 +357,8 @@ static struct usb_driver cdc_subset_driver = { .probe = usbnet_probe, .suspend = usbnet_suspend, .resume = usbnet_resume, + .pre_reset = dummy_prereset, + .post_reset = dummy_postreset, .disconnect = usbnet_disconnect, .id_table = products, .disable_hub_initiated_lpm = 1, diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f9e96c42755..5173821a957 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1218,8 +1218,12 @@ void usbnet_tx_timeout (struct net_device *net) unlink_urbs (dev, &dev->txq); tasklet_schedule (&dev->bh); - - // FIXME: device recovery -- reset? + /* this needs to be handled individually because the generic layer + * doesn't know what is sufficient and could not restore private + * information if a remedy of an unconditional reset were used. + */ + if (dev->driver_info->recover) + (dev->driver_info->recover)(dev); } EXPORT_SYMBOL_GPL(usbnet_tx_timeout); diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 0662e98fef7..26088feb660 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -148,6 +148,9 @@ struct driver_info { struct sk_buff *(*tx_fixup)(struct usbnet *dev, struct sk_buff *skb, gfp_t flags); + /* recover from timeout */ + void (*recover)(struct usbnet *dev); + /* early initialization code, can sleep. This is for minidrivers * having 'subminidrivers' that need to do extra initialization * right after minidriver have initialized hardware. */ -- cgit v1.2.3-70-g09d2 From c472ab68ad67db23c9907a27649b7dc0899b61f9 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 28 Jul 2014 10:56:36 +0200 Subject: cdc-ether: clean packet filter upon probe There are devices that don't do reset all the way. So the packet filter should be set to a sane initial value. Failure to do so leads to intermittent failures of DHCP on some systems under some conditions. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 9ea4bfe5d31..2a32d9167d3 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -341,6 +341,22 @@ next_desc: usb_driver_release_interface(driver, info->data); return -ENODEV; } + + /* Some devices don't initialise properly. In particular + * the packet filter is not reset. There are devices that + * don't do reset all the way. So the packet filter should + * be set to a sane initial value. + */ + usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + USB_CDC_SET_ETHERNET_PACKET_FILTER, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED | USB_CDC_PACKET_TYPE_BROADCAST, + intf->cur_altsetting->desc.bInterfaceNumber, + NULL, + 0, + USB_CTRL_SET_TIMEOUT + ); return 0; bad_desc: -- cgit v1.2.3-70-g09d2 From d92f5dec6325079c550889883af51db1b77d5623 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 28 Jul 2014 16:28:07 -0700 Subject: net: phy: re-apply PHY fixups during phy_register_device Commit 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") moved the call to phy_scan_fixups() in phy_init_hw() after a software reset is performed. By the time phy_init_hw() is called in phy_device_register(), no driver has been bound to this PHY yet, so all the checks in phy_init_hw() against the PHY driver and the PHY driver's config_init function will return 0. We will therefore never call phy_scan_fixups() as we should. Fix this by calling phy_scan_fixups() and check for its return value to restore the intended functionality. This broke PHY drivers which do register an early PHY fixup callback to intercept the PHY probing and do things like changing the 32-bits unique PHY identifier when a pseudo-PHY address has been used, as well as board-specific PHY fixups that need to be applied during driver probe time. Reported-by: Hauke Merthens Reported-by: Jonas Gorski Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 74a82328dd4..22c57be4dfa 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -355,7 +355,7 @@ int phy_device_register(struct phy_device *phydev) phydev->bus->phy_map[phydev->addr] = phydev; /* Run all of the fixups for this PHY */ - err = phy_init_hw(phydev); + err = phy_scan_fixups(phydev); if (err) { pr_err("PHY %d failed to initialize\n", phydev->addr); goto out; -- cgit v1.2.3-70-g09d2