From 592913ecb87a9e06f98ddb55b298f1a66bf94c6b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 13 Jul 2010 17:56:20 -0700 Subject: time: Kill off CONFIG_GENERIC_TIME Now that all arches have been converted over to use generic time via clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME config option and simplify the generic code. Signed-off-by: John Stultz LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner --- drivers/Makefile | 4 +++- drivers/acpi/acpi_pad.c | 2 +- drivers/acpi/processor_idle.c | 2 +- drivers/misc/Kconfig | 4 ++-- 4 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/Makefile b/drivers/Makefile index 91874e04855..ae473445ad6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -101,7 +101,9 @@ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/ obj-$(CONFIG_SUPERH) += sh/ obj-$(CONFIG_ARCH_SHMOBILE) += sh/ -obj-$(CONFIG_GENERIC_TIME) += clocksource/ +ifndef CONFIG_ARCH_USES_GETTIMEOFFSET +obj-y += clocksource/ +endif obj-$(CONFIG_DMA_ENGINE) += dma/ obj-$(CONFIG_DCA) += dca/ obj-$(CONFIG_HID) += hid/ diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 446aced33af..b76848c80be 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -77,7 +77,7 @@ static void power_saving_mwait_init(void) power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) | (highest_subcstate - 1); -#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86) +#if defined(CONFIG_X86) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: case X86_VENDOR_INTEL: diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e9a8026d39f..294e10b5480 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -264,7 +264,7 @@ int acpi_processor_resume(struct acpi_device * device) return 0; } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) +#if defined(CONFIG_X86) static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 26386a92f5a..5b9ba4834ce 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -72,7 +72,7 @@ config ATMEL_TCLIB config ATMEL_TCB_CLKSRC bool "TC Block Clocksource" - depends on ATMEL_TCLIB && GENERIC_TIME + depends on ATMEL_TCLIB default y help Select this to get a high precision clocksource based on a @@ -240,7 +240,7 @@ config CS5535_MFGPT_DEFAULT_IRQ config CS5535_CLOCK_EVENT_SRC tristate "CS5535/CS5536 high-res timer (MFGPT) events" - depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT + depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT help This driver provides a clock event source based on the MFGPT timer(s) in the CS5535 and CS5536 companion chips. -- cgit v1.2.3-70-g09d2 From f12a15be63d1de9a35971f35f06b73088fa25c3a Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 13 Jul 2010 17:56:27 -0700 Subject: x86: Convert common clocksources to use clocksource_register_hz/khz This converts the most common of the x86 clocksources over to use clocksource_register_hz/khz. Signed-off-by: John Stultz LKML-Reference: <1279068988-21864-11-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 13 +++++++++---- arch/x86/kernel/tsc.c | 5 +---- drivers/clocksource/acpi_pm.c | 9 ++------- 3 files changed, 12 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ba390d73117..33dbcc4ec5f 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -16,7 +16,6 @@ #include #define HPET_MASK CLOCKSOURCE_MASK(32) -#define HPET_SHIFT 22 /* FSEC = 10^-15 NSEC = 10^-9 */ @@ -787,7 +786,6 @@ static struct clocksource clocksource_hpet = { .rating = 250, .read = read_hpet, .mask = HPET_MASK, - .shift = HPET_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, .resume = hpet_resume_counter, #ifdef CONFIG_X86_64 @@ -798,6 +796,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { u64 start, now; + u64 hpet_freq; cycle_t t1; /* Start the counter */ @@ -832,9 +831,15 @@ static int hpet_clocksource_register(void) * mult = (hpet_period * 2^shift)/10^6 * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); - clocksource_register(&clocksource_hpet); + /* Need to convert hpet_period (fsec/cyc) to cyc/sec: + * + * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc) + * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period + */ + hpet_freq = FSEC_PER_NSEC * NSEC_PER_SEC; + do_div(hpet_freq, hpet_period); + clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); return 0; } diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 9faf91ae184..ce8e5023933 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -751,7 +751,6 @@ static struct clocksource clocksource_tsc = { .read = read_tsc, .resume = resume_tsc, .mask = CLOCKSOURCE_MASK(64), - .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_MUST_VERIFY, #ifdef CONFIG_X86_64 @@ -845,8 +844,6 @@ __cpuinit int unsynchronized_tsc(void) static void __init init_tsc_clocksource(void) { - clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, - clocksource_tsc.shift); if (tsc_clocksource_reliable) clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; /* lower the rating if we already know its unstable: */ @@ -854,7 +851,7 @@ static void __init init_tsc_clocksource(void) clocksource_tsc.rating = 0; clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; } - clocksource_register(&clocksource_tsc); + clocksource_register_khz(&clocksource_tsc, tsc_khz); } #ifdef CONFIG_X86_64 diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 72a633a6ec9..cfb0f527841 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -68,10 +68,7 @@ static struct clocksource clocksource_acpi_pm = { .rating = 200, .read = acpi_pm_read, .mask = (cycle_t)ACPI_PM_MASK, - .mult = 0, /*to be calculated*/ - .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS, - }; @@ -190,9 +187,6 @@ static int __init init_acpi_pm_clocksource(void) if (!pmtmr_ioport) return -ENODEV; - clocksource_acpi_pm.mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC, - clocksource_acpi_pm.shift); - /* "verify" this timing source: */ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) { udelay(100 * j); @@ -220,7 +214,8 @@ static int __init init_acpi_pm_clocksource(void) if (verify_pmtmr_rate() != 0) return -ENODEV; - return clocksource_register(&clocksource_acpi_pm); + return clocksource_register_hz(&clocksource_acpi_pm, + PMTMR_TICKS_PER_SEC); } /* We use fs_initcall because we want the PCI fixups to have run -- cgit v1.2.3-70-g09d2