From 8834d3608cc516f13e2e510f4057c263f3d2ce42 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 17 Apr 2014 11:08:47 +0200 Subject: rt2x00: fix beaconing on USB When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index ddeb5a709aa..a87ee9b6585 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -620,21 +620,19 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL, bss_conf->bssid); - /* - * Update the beacon. This is only required on USB devices. PCI - * devices fetch beacons periodically. - */ - if (changes & BSS_CHANGED_BEACON && rt2x00_is_usb(rt2x00dev)) - rt2x00queue_update_beacon(rt2x00dev, vif); - /* * Start/stop beaconing. */ if (changes & BSS_CHANGED_BEACON_ENABLED) { if (!bss_conf->enable_beacon && intf->enable_beacon) { - rt2x00queue_clear_beacon(rt2x00dev, vif); rt2x00dev->intf_beaconing--; intf->enable_beacon = false; + /* + * Clear beacon in the H/W for this vif. This is needed + * to disable beaconing on this particular interface + * and keep it running on other interfaces. + */ + rt2x00queue_clear_beacon(rt2x00dev, vif); if (rt2x00dev->intf_beaconing == 0) { /* @@ -645,11 +643,15 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, rt2x00queue_stop_queue(rt2x00dev->bcn); mutex_unlock(&intf->beacon_skb_mutex); } - - } else if (bss_conf->enable_beacon && !intf->enable_beacon) { rt2x00dev->intf_beaconing++; intf->enable_beacon = true; + /* + * Upload beacon to the H/W. This is only required on + * USB devices. PCI devices fetch beacons periodically. + */ + if (rt2x00_is_usb(rt2x00dev)) + rt2x00queue_update_beacon(rt2x00dev, vif); if (rt2x00dev->intf_beaconing == 1) { /* -- cgit v1.2.3-70-g09d2 From 328e203fc35f0b4f6df1c4943f74cf553bcc04f8 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 21 Apr 2014 17:38:44 +0100 Subject: rtlwifi: rtl8188ee: initialize packet_beacon static code analysis from cppcheck reports: [drivers/net/wireless/rtlwifi/rtl8188ee/trx.c:322]: (error) Uninitialized variable: packet_beacon packet_beacon is not initialized and hence packet_beacon contains garbage from the stack, so set it to false. Signed-off-by: Colin Ian King Cc: Stable [3.10+] Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8188ee/trx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c index 06ef47cd620..5b4c225396f 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c @@ -293,7 +293,7 @@ static void _rtl88ee_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *psaddr; __le16 fc; u16 type, ufc; - bool match_bssid, packet_toself, packet_beacon, addr; + bool match_bssid, packet_toself, packet_beacon = false, addr; tmp_buf = skb->data + pstatus->rx_drvinfo_size + pstatus->rx_bufshift; -- cgit v1.2.3-70-g09d2 From 3a758134e66ca74a9df792616b5288b2fa2cfd7f Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 21 Apr 2014 16:14:56 -0700 Subject: ath9k: fix possible hang on flush If a flush is requested, make sure to clear the descriptor once we've processed it. This resolves a hang that will occur if all RX descriptors are full when a flush is requested. Signed-off-by: Tim Harvey Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6c9accdb52e..e77a2536b81 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1113,14 +1113,13 @@ requeue_drop_frag: } requeue: list_add_tail(&bf->list, &sc->rx.rxbuf); - if (flush) - continue; if (edma) { ath_rx_edma_buf_link(sc, qtype); } else { ath_rx_buf_relink(sc, bf); - ath9k_hw_rxena(ah); + if (!flush) + ath9k_hw_rxena(ah); } } while (1); -- cgit v1.2.3-70-g09d2 From c82552c5b0cb1735dbcbad78b1ffc6d3c212dc56 Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Mon, 21 Apr 2014 16:14:57 -0700 Subject: ath9k: add a recv budget Implement a recv budget so that in cases of high traffic we still allow other taskets to get processed. Without this, we can encounter a host of issues during high wireless traffic reception depending on system load including rcu stall's detected (ARM), soft lockups, failure to service critical tasks such as watchdog resets, and triggering of the tx stuck tasklet. The same thing was proposed previously by Ben: http://www.spinics.net/lists/linux-wireless/msg112891.html The only difference here is that I make sure only processed packets are counted in the budget by checking at the end of the rx loop. Signed-off-by: Tim Harvey Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index e77a2536b81..19df969ec90 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -975,6 +975,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) u64 tsf = 0; unsigned long flags; dma_addr_t new_buf_addr; + unsigned int budget = 512; if (edma) dma_type = DMA_BIDIRECTIONAL; @@ -1121,6 +1122,9 @@ requeue: if (!flush) ath9k_hw_rxena(ah); } + + if (!budget--) + break; } while (1); if (!(ah->imask & ATH9K_INT_RXEOL)) { -- cgit v1.2.3-70-g09d2 From 8c7ae357cc5b6bd037ad2d666e9f3789cf882925 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 23 Apr 2014 15:07:57 +0530 Subject: ath9k: fix race in setting ATH_OP_INVALID The commit "ath9k: move sc_flags to ath_common" moved setting ATH_OP_INVALID flag below ieee80211_register_hw. This is causing the flag never being cleared randomly as the drv_start is called prior to setting flag. Fix this by setting the flag prior to register_hw. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ahb.c | 4 ---- drivers/net/wireless/ath/ath9k/init.c | 3 +++ drivers/net/wireless/ath/ath9k/pci.c | 5 ----- 3 files changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c index a0398fe3eb2..be3eb2a8d60 100644 --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -86,7 +86,6 @@ static int ath_ahb_probe(struct platform_device *pdev) int irq; int ret = 0; struct ath_hw *ah; - struct ath_common *common; char hw_name[64]; if (!dev_get_platdata(&pdev->dev)) { @@ -146,9 +145,6 @@ static int ath_ahb_probe(struct platform_device *pdev) wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)mem, irq); - common = ath9k_hw_common(sc->sc_ah); - /* Will be cleared in ath9k_start() */ - set_bit(ATH_OP_INVALID, &common->op_flags); return 0; err_irq: diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index cbbb02a6b13..36ae6490e55 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -783,6 +783,9 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, common = ath9k_hw_common(ah); ath9k_set_hw_capab(sc, hw); + /* Will be cleared in ath9k_start() */ + set_bit(ATH_OP_INVALID, &common->op_flags); + /* Initialize regulatory */ error = ath_regd_init(&common->regulatory, sc->hw->wiphy, ath9k_reg_notifier); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 25304adece5..914dbc6b172 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -784,7 +784,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct ath_softc *sc; struct ieee80211_hw *hw; - struct ath_common *common; u8 csz; u32 val; int ret = 0; @@ -877,10 +876,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)sc->mem, pdev->irq); - /* Will be cleared in ath9k_start() */ - common = ath9k_hw_common(sc->sc_ah); - set_bit(ATH_OP_INVALID, &common->op_flags); - return 0; err_init: -- cgit v1.2.3-70-g09d2 From ffa216bb5eecfce0f01b0b2a95d5c320dde90005 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 23 Apr 2014 12:20:55 +0200 Subject: brcmfmac: Fix brcmf_chip_ai_coredisable not applying reset bits to BCMA_IOCTL brcmfmac has been broken on my cubietruck with a BCM43362: brcmfmac: brcmf_chip_recognition: found AXI chip: BCM43362, rev=1 brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d since commit 53036261033: "brcmfmac: update core reset and disable routines". The problem is that since this commit brcmf_chip_ai_resetcore no longer sets BCMA_IOCTL itself before bringing the core out of reset, instead relying on brcmf_chip_ai_coredisable to do so. But brcmf_chip_ai_coredisable is a nop of the chip is already in reset. This patch modifies brcmf_chip_ai_coredisable to always set BCMA_IOCTL even if the core is already in reset. This fixes brcmfmac hanging in firmware loading on my board. Cc: stable@vger.kernel.org # v3.14 Signed-off-by: Hans de Goede Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/chip.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/chip.c b/drivers/net/wireless/brcm80211/brcmfmac/chip.c index df130ef53d1..c7c9f15c0fe 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c @@ -303,10 +303,10 @@ static void brcmf_chip_ai_coredisable(struct brcmf_core_priv *core, ci = core->chip; - /* if core is already in reset, just return */ + /* if core is already in reset, skip reset */ regdata = ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL); if ((regdata & BCMA_RESET_CTL_RESET) != 0) - return; + goto in_reset_configure; /* configure reset */ ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, @@ -322,6 +322,7 @@ static void brcmf_chip_ai_coredisable(struct brcmf_core_priv *core, SPINWAIT(ci->ops->read32(ci->ctx, core->wrapbase + BCMA_RESET_CTL) != BCMA_RESET_CTL_RESET, 300); +in_reset_configure: /* in-reset configure */ ci->ops->write32(ci->ctx, core->wrapbase + BCMA_IOCTL, reset | BCMA_IOCTL_FGC | BCMA_IOCTL_CLK); -- cgit v1.2.3-70-g09d2 From 3c49aa852e00978ba2f1a4d1e4598a0c669a5347 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 22 Apr 2014 14:04:16 -0700 Subject: Revert "Bluetooth: Enable autosuspend for Intel Bluetooth device" This reverts commit d2bee8fb6e18f6116aada39851918473761f7ab1. Enabling autosuspend for Intel Bluetooth devices has been shown to not work reliable. It does work for some people with certain combinations of USB host controllers, but for others it puts the device to sleep and it will not wake up for any event. These events can be important ones like HCI Inquiry Complete or HCI Connection Request. The events will arrive as soon as you poke the device with a new command, but that is not something we can do in these cases. Initially there were patches to the xHCI USB controller that fixed this for some people, but not for all. This could be well a problem somewhere in the USB subsystem or in the USB host controllers or just plain a hardware issue somewhere. At this moment we just do not know and the only safe action is to revert this patch. Signed-off-by: Marcel Holtmann Cc: Tedd Ho-Jeong An Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f338b0c5a8d..dc99eff2a4d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1485,10 +1485,8 @@ static int btusb_probe(struct usb_interface *intf, if (id->driver_info & BTUSB_BCM92035) hdev->setup = btusb_setup_bcm92035; - if (id->driver_info & BTUSB_INTEL) { - usb_enable_autosuspend(data->udev); + if (id->driver_info & BTUSB_INTEL) hdev->setup = btusb_setup_intel; - } /* Interface numbers are hardcoded in the specification */ data->isoc = usb_ifnum_to_if(data->udev, 1); -- cgit v1.2.3-70-g09d2 From 1fb4e09a7e780b915dbd172592ae7e2a4c071065 Mon Sep 17 00:00:00 2001 From: Mohammed Habibulla Date: Thu, 17 Apr 2014 11:37:13 -0700 Subject: Bluetooth: Add support for Lite-on [04ca:3007] Add support for the AR9462 chip T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Mohammed Habibulla Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index be571fef185..a83b57e57b6 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -82,6 +82,7 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3004) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x04CA, 0x3006) }, + { USB_DEVICE(0x04CA, 0x3007) }, { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x04CA, 0x300b) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -131,6 +132,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index dc99eff2a4d..a7dfbf9a3af 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -152,6 +152,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3-70-g09d2 From ae9c25a1826ca9602e89fe9c11700c63ce16d077 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 27 Apr 2014 16:37:39 +0200 Subject: ath9k_hw: do not lower ANI setting below default on AR913x When the amount of noise fluctuates strongly, low immunity settings can sometimes disrupt signal detection on AR913x chips. When that happens, no OFDM/CCK errors are reported anymore, and ANI tunes the radio to the lowest immunity settings. Usually rx/tx fails as well in that case. To fix this, keep noise immunity settings at or above ANI default level, which will keep radio parameters at or above INI values. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 6d47783f2e5..ba502a2d199 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -155,6 +155,9 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_OFDM_DEF_LEVEL) + immunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL; + if (!scan) aniState->ofdmNoiseImmunityLevel = immunityLevel; @@ -235,6 +238,9 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel, BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW, ATH9K_ANI_RSSI_THR_HIGH); + if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_CCK_DEF_LEVEL) + immunityLevel = ATH9K_ANI_CCK_DEF_LEVEL; + if (ah->opmode == NL80211_IFTYPE_STATION && BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW && immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI) -- cgit v1.2.3-70-g09d2 From 62e54dbb599103ff461bb3fe6e32a3066da79754 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 28 Apr 2014 18:32:12 +0200 Subject: ath9k: remove tid->paused flag There are some corner cases where the driver could get stuck with a full tid queue that is paused, leading to a software tx queue hang. Since the tx queueing rework, pausing per-tid queues on aggregation session setup is no longer necessary. The driver will assign sequence numbers to buffered frames when a new session is established, in order to get the correct starting sequence number. mac80211 prevents new frames from entering the queue during setup. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/debug_sta.c | 5 ++--- drivers/net/wireless/ath/ath9k/xmit.c | 14 +------------- 3 files changed, 3 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 44d74495c4d..3ba03dde421 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,7 +251,6 @@ struct ath_atx_tid { s8 bar_index; bool sched; - bool paused; bool active; }; diff --git a/drivers/net/wireless/ath/ath9k/debug_sta.c b/drivers/net/wireless/ath/ath9k/debug_sta.c index d76e6e0120d..ffca918ff16 100644 --- a/drivers/net/wireless/ath/ath9k/debug_sta.c +++ b/drivers/net/wireless/ath/ath9k/debug_sta.c @@ -72,7 +72,7 @@ static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf, ath_txq_lock(sc, txq); if (tid->active) { len += scnprintf(buf + len, size - len, - "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n", + "%3d%11d%10d%10d%10d%10d%9d%6d\n", tid->tidno, tid->seq_start, tid->seq_next, @@ -80,8 +80,7 @@ static ssize_t read_file_node_aggr(struct file *file, char __user *user_buf, tid->baw_head, tid->baw_tail, tid->bar_index, - tid->sched, - tid->paused); + tid->sched); } ath_txq_unlock(sc, txq); } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 87cbec47fb4..66acb2cbd9d 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -107,9 +107,6 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) { struct ath_atx_ac *ac = tid->ac; - if (tid->paused) - return; - if (tid->sched) return; @@ -1407,7 +1404,6 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, ath_tx_tid_change_state(sc, txtid); txtid->active = true; - txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1427,7 +1423,6 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) ath_txq_lock(sc, txq); txtid->active = false; - txtid->paused = false; ath_tx_flush_tid(sc, txtid); ath_tx_tid_change_state(sc, txtid); ath_txq_unlock_complete(sc, txq); @@ -1487,7 +1482,7 @@ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an) ath_txq_lock(sc, txq); ac->clear_ps_filter = true; - if (!tid->paused && ath_tid_has_buffered(tid)) { + if (ath_tid_has_buffered(tid)) { ath_tx_queue_tid(txq, tid); ath_txq_schedule(sc, txq); } @@ -1510,7 +1505,6 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, ath_txq_lock(sc, txq); tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - tid->paused = false; if (ath_tid_has_buffered(tid)) { ath_tx_queue_tid(txq, tid); @@ -1544,8 +1538,6 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw, continue; tid = ATH_AN_2_TID(an, i); - if (tid->paused) - continue; ath_txq_lock(sc, tid->ac->txq); while (nframes > 0) { @@ -1844,9 +1836,6 @@ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq) list_del(&tid->list); tid->sched = false; - if (tid->paused) - continue; - if (ath_tx_sched_aggr(sc, txq, tid, &stop)) sent = true; @@ -2698,7 +2687,6 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->baw_size = WME_MAX_BA; tid->baw_head = tid->baw_tail = 0; tid->sched = false; - tid->paused = false; tid->active = false; __skb_queue_head_init(&tid->buf_q); __skb_queue_head_init(&tid->retry_q); -- cgit v1.2.3-70-g09d2 From 5f9186990ec4579ee5b7a99b3254c29eda479f36 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 25 Apr 2014 10:05:43 -0500 Subject: rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbb Beginning with kernel 3.13, this driver fails on some systems. The problem was bisected to: Commit 1bf4bbb4024dcdab5e57634dd8ae1072d42a53ac Author: Felix Fietkau Title: mac80211: send control port protocol frames to the VO queue There is noting wrong with the above commit. The regression occurs because V0 queue on RTL8192SE cards uses priority 6, not the usual 7. The fix is to modify the rtl8192se routine that sets the correct transmit queue. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=74541 Reported-by: Alex Miller Tested-by: Alex Miller Signed-off-by: Larry Finger Cc: Stable [3.13+] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index 36b48be8329..2b3c78baa9f 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -49,6 +49,12 @@ static u8 _rtl92se_map_hwqueue_to_fwqueue(struct sk_buff *skb, u8 skb_queue) if (ieee80211_is_nullfunc(fc)) return QSLT_HIGH; + /* Kernel commit 1bf4bbb4024dcdab changed EAPOL packets to use + * queue V0 at priority 7; however, the RTL8192SE appears to have + * that queue at priority 6 + */ + if (skb->priority == 7) + return QSLT_VO; return skb->priority; } -- cgit v1.2.3-70-g09d2 From 3234f5b06fc3094176a86772cc64baf3decc98fc Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 26 Apr 2014 21:59:04 +0100 Subject: rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init() Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 68b5c7e92cf..07cb06da672 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1001,7 +1001,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw) err = _rtl92cu_init_mac(hw); if (err) { RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n"); - return err; + goto exit; } err = rtl92c_download_fw(hw); if (err) { -- cgit v1.2.3-70-g09d2