From c2e14f11120bbef0c883e795da8180b58f3cddae Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 13 Jan 2008 14:04:16 +0900 Subject: sata_sil24: freeze on non-dev errors reported via CERR CERR reports errors detected during executing a command. This doesn't mean the error is tied to the command and can be recovered by just issuing it again. Many of the errors are fatal port-wide connditions including HSM violation, host bus error and ATA bus error and require freezing and port reset. The freezing part wasn't implemented previously. This used to be okay because port resets were scheduled anyway and EH eventually resets and recovers the port. With PMP support added, this is no longer true. The error condition and recover actions are attributed to the fan-out port and the host port condition isn't properly recovered leading to EH failures. This patch makes CERR errors which require resets to freeze the port. This will force host port reset and proper recovery. Signed-off-by: Tejun Heo Cc: Andrew Ryder Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil24.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index d9c8b32b483..864c1c1b851 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -1094,10 +1094,13 @@ static void sil24_error_intr(struct ata_port *ap) if (ci && ci->desc) { err_mask |= ci->err_mask; action |= ci->action; + if (action & ATA_EH_RESET_MASK) + freeze = 1; ata_ehi_push_desc(ehi, "%s", ci->desc); } else { err_mask |= AC_ERR_OTHER; action |= ATA_EH_SOFTRESET; + freeze = 1; ata_ehi_push_desc(ehi, "unknown command error %d", cerr); } -- cgit v1.2.3-70-g09d2