From c723e08af18e60cda3bbc90e0d6fb688587aeb9f Mon Sep 17 00:00:00 2001 From: "Juha [êölä" Date: Sun, 6 Aug 2006 09:58:22 +0100 Subject: [ARM] 3744/1: MMC: mmcqd gets stuck when block queue is plugged MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Patch from Juha [êölä When the block queue is plugged, mq->req must be set to NULL. Otherwise mq->req might be left non-NULL, even though mmcqd is not processing a request, thus preventing the MMC queue thread from being woken up when new requests do arrive. Signed-off-by: Juha Yrjola Signed-off-by: Russell King --- drivers/mmc/mmc_queue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/mmc_queue.c b/drivers/mmc/mmc_queue.c index 0b9682e9a35..74f8cdeeff0 100644 --- a/drivers/mmc/mmc_queue.c +++ b/drivers/mmc/mmc_queue.c @@ -79,7 +79,8 @@ static int mmc_queue_thread(void *d) spin_lock_irq(q->queue_lock); set_current_state(TASK_INTERRUPTIBLE); if (!blk_queue_plugged(q)) - mq->req = req = elv_next_request(q); + req = elv_next_request(q); + mq->req = req; spin_unlock_irq(q->queue_lock); if (!req) { -- cgit v1.2.3-70-g09d2 From ca8c100a00e91cf93782008441a2e159c4b49a25 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Aug 2006 20:53:40 +0100 Subject: [ARM] Fix NCR5380-based SCSI card build The NCR5380-based SCSI cards need the SCSI SPI transport selected to build correctly. Signed-off-by: Russell King --- drivers/scsi/arm/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 06d7601cdf5..d006a8cb4a7 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -69,6 +69,7 @@ comment "The following drivers are not fully supported" config SCSI_CUMANA_1 tristate "CumanaSCSI I support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Cumana SCSI I card. If you have an Acorn system with one of these, say Y. If unsure, say N. @@ -76,6 +77,7 @@ config SCSI_CUMANA_1 config SCSI_ECOSCSI tristate "EcoScsi support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI + select SCSI_SPI_ATTRS help This enables support for the EcoSCSI card -- a small card that sits in the Econet socket. If you have an Acorn system with one of these, @@ -84,6 +86,7 @@ config SCSI_ECOSCSI config SCSI_OAK1 tristate "Oak SCSI support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Oak SCSI card. If you have an Acorn system with one of these, say Y. If unsure, say N. -- cgit v1.2.3-70-g09d2 From 574dc0abab6650c5371df15ac708e48fa25bed89 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Aug 2006 20:55:33 +0100 Subject: [ARM] Fix Acorn platform SCSI driver build failures SCSI folk forgot to fix up all the uses of 'buffer' before deleting this struct member. Do it for them to rescue the resulting build failures. Signed-off-by: Russell King --- drivers/scsi/arm/scsi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 6dd544a5eb5..8c2600ffc6a 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -74,7 +74,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt) unsigned long len = 0; int buf; - SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer; + SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; SCpnt->SCp.ptr = (char *) (page_address(SCpnt->SCp.buffer->page) + -- cgit v1.2.3-70-g09d2 From 916f3ac680fcc4c142e9acd46161f55533b11760 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 6 Aug 2006 22:22:23 +0200 Subject: [MMC] Fix base address configuration in wbsd There were some confusion about base I/O variables in the wbsd driver. Seems like things have been working on shear luck so far. The global 'io' variable (used when manually configuring the resources) was used instead of the local 'base' variable. Signed-off-by: Pierre Ossman Signed-off-by: Russell King --- drivers/mmc/wbsd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 8a30ef3ae41..ce86887ed3b 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -41,7 +41,7 @@ #include "wbsd.h" #define DRIVER_NAME "wbsd" -#define DRIVER_VERSION "1.5" +#define DRIVER_VERSION "1.6" #define DBG(x...) \ pr_debug(DRIVER_NAME ": " x) @@ -1439,13 +1439,13 @@ static int __devinit wbsd_scan(struct wbsd_host *host) static int __devinit wbsd_request_region(struct wbsd_host *host, int base) { - if (io & 0x7) + if (base & 0x7) return -EINVAL; if (!request_region(base, 8, DRIVER_NAME)) return -EIO; - host->base = io; + host->base = base; return 0; } -- cgit v1.2.3-70-g09d2 From dd2c609c59cd9daeb90d58f3d1bc3813e8987df1 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Mon, 7 Aug 2006 01:40:04 +0200 Subject: [MMC] Another stray 'io' reference Another misuse of the global 'io' variable instead of the local 'base'. Signed-off-by: Pierre Ossman Signed-off-by: Russell King --- drivers/mmc/wbsd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index ce86887ed3b..c351c6d1a18 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -1773,7 +1773,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma, /* * Request resources. */ - ret = wbsd_request_resources(host, io, irq, dma); + ret = wbsd_request_resources(host, base, irq, dma); if (ret) { wbsd_release_resources(host); wbsd_free_mmc(dev); @@ -1861,6 +1861,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp) static int __devinit wbsd_probe(struct platform_device *dev) { + /* Use the module parameters for resources */ return wbsd_init(&dev->dev, io, irq, dma, 0); } -- cgit v1.2.3-70-g09d2 From 25a2001a285e187d99ea347693bedd73b3e0722a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 7 Aug 2006 17:00:28 +0200 Subject: [S390] tape class return value handling. Without this patch register_tape_dev() will always fail, but might return a value that is not an error number. This will lead to accesses to already freed memory areas... Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_class.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c index 643b6d07856..56b87618b10 100644 --- a/drivers/s390/char/tape_class.c +++ b/drivers/s390/char/tape_class.c @@ -76,7 +76,7 @@ struct tape_class_device *register_tape_dev( device, "%s", tcd->device_name ); - rc = PTR_ERR(tcd->class_device); + rc = IS_ERR(tcd->class_device) ? PTR_ERR(tcd->class_device) : 0; if (rc) goto fail_with_cdev; rc = sysfs_create_link( -- cgit v1.2.3-70-g09d2 From 4bc0c4f9e74e7a5d62ef4db923b377f2aa474a8f Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Mon, 7 Aug 2006 17:00:30 +0200 Subject: [S390] retry after deferred condition code. Do a retry of read device characteristics / read configuration data when a deferred condition code 1 is encountered in ccw_device_wake_up(). Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_ops.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index a60124264be..9e3de0bd59b 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -263,6 +263,9 @@ ccw_device_wake_up(struct ccw_device *cdev, unsigned long ip, struct irb *irb) /* Abuse intparm for error reporting. */ if (IS_ERR(irb)) cdev->private->intparm = -EIO; + else if (irb->scsw.cc == 1) + /* Retry for deferred condition code. */ + cdev->private->intparm = -EAGAIN; else if ((irb->scsw.dstat != (DEV_STAT_CHN_END|DEV_STAT_DEV_END)) || (irb->scsw.cstat != 0)) { -- cgit v1.2.3-70-g09d2 From 65200c291c4ce397835d8232eaa0878b765a9bce Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Mon, 7 Aug 2006 17:00:33 +0200 Subject: [S390] lost interrupt after chpid vary off/on cycle. I/O on a CCW device may stall if a channel path to that device is logicaly varied off/on. A user I/O interrupt can get misinterpreted as interrupt for an internal path verification operation due to a missing check and is therefore never reported to the device driver. Correct check for pending interruptions before starting path verification. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_fsm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 7a39e0b0386..6d91c2eb205 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -772,6 +772,7 @@ ccw_device_online_verify(struct ccw_device *cdev, enum dev_event dev_event) stsch(sch->schid, &sch->schib); if (sch->schib.scsw.actl != 0 || + (sch->schib.scsw.stctl & SCSW_STCTL_STATUS_PEND) || (cdev->private->irb.scsw.stctl & SCSW_STCTL_STATUS_PEND)) { /* * No final status yet or final status not yet delivered -- cgit v1.2.3-70-g09d2 From 37ab46a3f4983c32d5b5ab6a0366ec482e38ba47 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 7 Aug 2006 18:13:06 +0200 Subject: [S390] xpram system device class. Remove system device class for xpram. It creates the directory hierarchy under /sys/devices/system/xpram/xpram0. The xpram0 directory is empty and it is always created while xpram1 and following devices are always missing, independent if the devices exist or not. Since the xpram devices are listed in /proc/partitions and /sys/block/ as slram the system device class for xpram is meaningless. Signed-off-by: Martin Schwidefsky --- drivers/s390/block/xpram.c | 25 +------------------------ 1 file changed, 1 insertion(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c index 1140302ff11..ca7d51f7ecc 100644 --- a/drivers/s390/block/xpram.c +++ b/drivers/s390/block/xpram.c @@ -48,15 +48,6 @@ #define PRINT_ERR(x...) printk(KERN_ERR XPRAM_NAME " error:" x) -static struct sysdev_class xpram_sysclass = { - set_kset_name("xpram"), -}; - -static struct sys_device xpram_sys_device = { - .id = 0, - .cls = &xpram_sysclass, -}; - typedef struct { unsigned int size; /* size of xpram segment in pages */ unsigned int offset; /* start page of xpram segment */ @@ -451,8 +442,6 @@ static void __exit xpram_exit(void) } unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME); blk_cleanup_queue(xpram_queue); - sysdev_unregister(&xpram_sys_device); - sysdev_class_unregister(&xpram_sysclass); } static int __init xpram_init(void) @@ -470,19 +459,7 @@ static int __init xpram_init(void) rc = xpram_setup_sizes(xpram_pages); if (rc) return rc; - rc = sysdev_class_register(&xpram_sysclass); - if (rc) - return rc; - - rc = sysdev_register(&xpram_sys_device); - if (rc) { - sysdev_class_unregister(&xpram_sysclass); - return rc; - } - rc = xpram_setup_blkdev(); - if (rc) - sysdev_unregister(&xpram_sys_device); - return rc; + return xpram_setup_blkdev(); } module_init(xpram_init); -- cgit v1.2.3-70-g09d2 From d14cc9a342a8004b0ecfe66f1f12120962b61d8c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 7 Aug 2006 16:11:48 -0700 Subject: [TG3]: skb->dev assignment is done by netdev_alloc_skb All caller of netdev_alloc_skb need to assign skb->dev shortly afterwards. Move it into common code. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6f97962dd06..0afbed6753f 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3101,7 +3101,6 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key, if (skb == NULL) return -ENOMEM; - skb->dev = tp->dev; skb_reserve(skb, tp->rx_offset); mapping = pci_map_single(tp->pdev, skb->data, @@ -3274,7 +3273,6 @@ static int tg3_rx(struct tg3 *tp, int budget) if (copy_skb == NULL) goto drop_it_no_recycle; - copy_skb->dev = tp->dev; skb_reserve(copy_skb, 2); skb_put(copy_skb, len); pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); -- cgit v1.2.3-70-g09d2 From 1b2a720506ccf7c30baaeda5d990c29b31e21726 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 7 Aug 2006 21:46:02 -0700 Subject: [TG3]: Fix tx race condition Fix a subtle race condition between tg3_start_xmit() and tg3_tx() discovered by Herbert Xu : CPU0 CPU1 tg3_start_xmit() if (tx_ring_full) { tx_lock tg3_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in tg3_tx() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if tg3_tx() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in tg3_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in tg3_tx() before calling netif_wake_queue(). 4. Change TX_BUFFS_AVAIL to an inline function with a memory barrier. Herbert and David suggested using the memory barrier instead of volatile. 5. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. 6. Update version to 3.65. Signed-off-by: Michael Chan Acked-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/tg3.c | 49 ++++++++++++++++++++++++++++--------------------- drivers/net/tg3.h | 8 +++----- 2 files changed, 31 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 0afbed6753f..eafabb253f0 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.64" -#define DRV_MODULE_RELDATE "July 31, 2006" +#define DRV_MODULE_VERSION "3.65" +#define DRV_MODULE_RELDATE "August 07, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -123,9 +123,6 @@ TG3_RX_RCB_RING_SIZE(tp)) #define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * \ TG3_TX_RING_SIZE) -#define TX_BUFFS_AVAIL(TP) \ - ((TP)->tx_pending - \ - (((TP)->tx_prod - (TP)->tx_cons) & (TG3_TX_RING_SIZE - 1))) #define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1)) #define RX_PKT_BUF_SZ (1536 + tp->rx_offset + 64) @@ -2987,6 +2984,13 @@ static void tg3_tx_recover(struct tg3 *tp) spin_unlock(&tp->lock); } +static inline u32 tg3_tx_avail(struct tg3 *tp) +{ + smp_mb(); + return (tp->tx_pending - + ((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1))); +} + /* Tigon3 never reports partial packet sends. So we do not * need special logic to handle SKBs that have not had all * of their frags sent yet, like SunGEM does. @@ -3038,12 +3042,20 @@ static void tg3_tx(struct tg3 *tp) tp->tx_cons = sw_idx; - if (unlikely(netif_queue_stopped(tp->dev))) { - spin_lock(&tp->tx_lock); + /* Need to make the tx_cons update visible to tg3_start_xmit() + * before checking for netif_queue_stopped(). Without the + * memory barrier, there is a small possibility that tg3_start_xmit() + * will miss it and cause the queue to be stopped forever. + */ + smp_mb(); + + if (unlikely(netif_queue_stopped(tp->dev) && + (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))) { + netif_tx_lock(tp->dev); if (netif_queue_stopped(tp->dev) && - (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)) + (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); + netif_tx_unlock(tp->dev); } } @@ -3795,7 +3807,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) * interrupt. Furthermore, IRQ processing runs lockless so we have * no IRQ context deadlocks to worry about either. Rejoice! */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); @@ -3891,12 +3903,10 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) { - spin_lock(&tp->tx_lock); + if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) { netif_stop_queue(dev); - if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); } out_unlock: @@ -3918,7 +3928,7 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb) struct sk_buff *segs, *nskb; /* Estimate the number of fragments in the worst case */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) { netif_stop_queue(tp->dev); return NETDEV_TX_BUSY; } @@ -3958,7 +3968,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) * interrupt. Furthermore, IRQ processing runs lockless so we have * no IRQ context deadlocks to worry about either. Rejoice! */ - if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { + if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { if (!netif_queue_stopped(dev)) { netif_stop_queue(dev); @@ -4108,12 +4118,10 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev) tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry); tp->tx_prod = entry; - if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) { - spin_lock(&tp->tx_lock); + if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) { netif_stop_queue(dev); - if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH) + if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH) netif_wake_queue(tp->dev); - spin_unlock(&tp->tx_lock); } out_unlock: @@ -11472,7 +11480,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA; #endif spin_lock_init(&tp->lock); - spin_lock_init(&tp->tx_lock); spin_lock_init(&tp->indirect_lock); INIT_WORK(&tp->reset_task, tg3_reset_task, tp); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ba2c98711c8..3ecf356cfb0 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2079,9 +2079,9 @@ struct tg3 { * lock: Held during reset, PHY access, timer, and when * updating tg3_flags and tg3_flags2. * - * tx_lock: Held during tg3_start_xmit and tg3_tx only - * when calling netif_[start|stop]_queue. - * tg3_start_xmit is protected by netif_tx_lock. + * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds + * netif_tx_lock when it needs to call + * netif_wake_queue. * * Both of these locks are to be held with BH safety. * @@ -2118,8 +2118,6 @@ struct tg3 { u32 tx_cons; u32 tx_pending; - spinlock_t tx_lock; - struct tg3_tx_buffer_desc *tx_ring; struct tx_ring_info *tx_buffers; dma_addr_t tx_desc_mapping; -- cgit v1.2.3-70-g09d2 From 5bdd6cc3300be534f2a2cf826e3fb926b5695698 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 25 Jul 2006 16:17:54 -0300 Subject: V4L/DVB (4371a): Fix V4L1 dependencies on compat_ioctl32 Compat32 should be able to handle V4L1 ioctls if the old API support were selected. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/compat_ioctl32.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index 9dddff42ec1..b69ee119481 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -21,7 +21,7 @@ #ifdef CONFIG_COMPAT - +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_tuner32 { compat_int_t tuner; char name[32]; @@ -107,6 +107,7 @@ struct video_window32 { compat_caddr_t clips; compat_int_t clipcount; }; +#endif static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -124,6 +125,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* You get back everything except the clips... */ static int put_video_window32(struct video_window *kp, struct video_window32 __user *up) { @@ -138,6 +140,7 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u return -EFAULT; return 0; } +#endif struct v4l2_clip32 { @@ -490,6 +493,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user return 0; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_code32 { char loadwhat[16]; /* name or tag of file being passed */ @@ -517,6 +521,8 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user #define VIDIOCSFREQ32 _IOW('v',15, u32) #define VIDIOCSMICROCODE32 _IOW('v',27, struct video_code32) +#endif + /* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */ #define VIDIOC_ENUMINPUT32 VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4) #define VIDIOC_G_FMT32 _IOWR ('V', 4, struct v4l2_format32) @@ -537,6 +543,7 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user #define VIDIOC_S_INPUT32 _IOWR ('V', 39, compat_int_t) #define VIDIOC_TRY_FMT32 _IOWR ('V', 64, struct v4l2_format32) +#ifdef CONFIG_VIDEO_V4L1_COMPAT enum { MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip) }; @@ -601,14 +608,17 @@ static int do_set_window(struct file *file, unsigned int cmd, unsigned long arg) return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw); } +#endif static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { union { +#ifdef CONFIG_VIDEO_V4L1_COMPAT struct video_tuner vt; struct video_buffer vb; struct video_window vw; struct video_code vc; +#endif struct v4l2_format v2f; struct v4l2_buffer v2b; struct v4l2_framebuffer v2fb; @@ -624,6 +634,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg /* First, convert the command. */ switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break; case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break; case VIDIOCGWIN32: cmd = VIDIOCGWIN; break; @@ -631,6 +642,8 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break; case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break; case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break; + case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break; +#endif case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break; case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break; case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break; @@ -647,10 +660,10 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break; case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break; case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break; - case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break; }; switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSTUNER: case VIDIOCGTUNER: err = get_video_tuner32(&karg.vt, up); @@ -664,6 +677,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg break; case VIDIOCSFREQ: +#endif case VIDIOC_S_INPUT: case VIDIOC_OVERLAY: case VIDIOC_STREAMON: @@ -717,18 +731,21 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg compatible_arg = 0; break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGWIN: case VIDIOCGFBUF: case VIDIOCGFREQ: +#endif case VIDIOC_G_FBUF: case VIDIOC_G_INPUT: compatible_arg = 0; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSMICROCODE: err = microcode32(&karg.vc, up); compatible_arg = 0; break; +#endif }; - if(err) goto out; @@ -743,6 +760,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg } if(err == 0) { switch(cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGTUNER: err = put_video_tuner32(&karg.vt, up); break; @@ -754,7 +772,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg case VIDIOCGFBUF: err = put_video_buffer32(&karg.vb, up); break; - +#endif case VIDIOC_G_FBUF: err = put_v4l2_framebuffer32(&karg.v2fb, up); break; @@ -792,7 +810,9 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg err = put_v4l2_input32(&karg.v2i, up); break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGFREQ: +#endif case VIDIOC_G_INPUT: err = put_user(((u32)karg.vx), (u32 __user *)up); break; @@ -810,6 +830,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) return ret; switch (cmd) { +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSWIN32: ret = do_set_window(file, cmd, arg); break; @@ -820,6 +841,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOCSFBUF32: case VIDIOCGFREQ32: case VIDIOCSFREQ32: +#endif case VIDIOC_QUERYCAP: case VIDIOC_ENUM_FMT: case VIDIOC_G_FMT32: @@ -851,6 +873,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) ret = do_video_ioctl(file, cmd, arg); break; +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* Little v, the video4linux ioctls (conflict?) */ case VIDIOCGCAP: case VIDIOCGCHAN: @@ -879,6 +902,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case _IOR('v' , BASE_VIDIOCPRIVATE+7, int): ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); break; +#endif default: v4l_print_ioctl("compat_ioctl32", cmd); } -- cgit v1.2.3-70-g09d2 From 3cdc0f263b9fe99f7dfcef49df7a148b458e9d11 Mon Sep 17 00:00:00 2001 From: Luc Van Oostenryck Date: Tue, 8 Aug 2006 09:10:10 -0300 Subject: V4L/DVB (4395): Restore compat_ioctl in pwc driver The compat_ioctl support of the pwc driver was dropped during the last update of the driver. I suppose it was by mistake. If yes here is the patch to restore the support. Signed-off-by: Luc Van Oostenryck Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pwc/pwc-if.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 47d0d83a026..d4703944df9 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -160,6 +160,7 @@ static struct file_operations pwc_fops = { .poll = pwc_video_poll, .mmap = pwc_video_mmap, .ioctl = pwc_video_ioctl, + .compat_ioctl = v4l_compat_ioctl32, .llseek = no_llseek, }; static struct video_device pwc_template = { -- cgit v1.2.3-70-g09d2 From 0dfa9abd6bd153364da8cb131db0d0404ab15ad1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 Aug 2006 09:10:10 -0300 Subject: V4L/DVB (4399): Fix a typo that caused some compat stuff to not work Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-video.c | 4 ++-- drivers/media/video/saa7134/saa7134-video.c | 2 +- drivers/media/video/v4l2-common.c | 6 +++--- drivers/media/video/videodev.c | 2 +- drivers/media/video/vivi.c | 4 ++-- 5 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 547cdbdb644..94c92bacc34 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1225,7 +1225,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return cx8800_try_fmt(dev,fh,f); } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1584,7 +1584,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, *id = 0; return 0; } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCSTUNER: { struct video_tuner *v = arg; diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 8656f2400e1..2c171af9a9f 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -2087,7 +2087,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return saa7134_try_fmt(dev,fh,f); } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 2ecbeffb559..8d972ffdaf9 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -202,7 +202,7 @@ static char *v4l2_memory_names[] = { /* ------------------------------------------------------------------ */ /* debug help functions */ -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT static const char *v4l1_ioctls[] = { [_IOC_NR(VIDIOCGCAP)] = "VIDIOCGCAP", [_IOC_NR(VIDIOCGCHAN)] = "VIDIOCGCHAN", @@ -301,7 +301,7 @@ static const char *v4l2_ioctls[] = { #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls) static const char *v4l2_int_ioctls[] = { -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT [_IOC_NR(DECODER_GET_CAPABILITIES)] = "DECODER_GET_CAPABILITIES", [_IOC_NR(DECODER_GET_STATUS)] = "DECODER_GET_STATUS", [_IOC_NR(DECODER_SET_NORM)] = "DECODER_SET_NORM", @@ -367,7 +367,7 @@ void v4l_printk_ioctl(unsigned int cmd) (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ? v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd); break; -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT case 'v': printk("v4l1 ioctl %s, dir=%s (0x%08x)\n", (_IOC_NR(cmd) < V4L1_IOCTLS) ? diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 0fc90cd393f..88bf2af2a0e 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -760,7 +760,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, ret=vfd->vidioc_overlay(file, fh, *i); break; } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 38bd0c1018c..841884af0cc 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -986,7 +986,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) file->f_flags & O_NONBLOCK)); } -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) { struct vivi_fh *fh=priv; @@ -1328,7 +1328,7 @@ static struct video_device vivi = { .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif .tvnorms = tvnorms, -- cgit v1.2.3-70-g09d2 From 7fb6529762f8185f792ad74adcf211713f973c80 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 Aug 2006 15:47:31 -0300 Subject: V4L/DVB (4407): Driver dsbr100 is a radio device, not a video one! Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 12 +- drivers/media/radio/Makefile | 1 + drivers/media/radio/dsbr100.c | 430 ++++++++++++++++++++++++++++++++++++++++++ drivers/media/video/Kconfig | 12 -- drivers/media/video/Makefile | 1 - drivers/media/video/dsbr100.c | 430 ------------------------------------------ 6 files changed, 442 insertions(+), 444 deletions(-) create mode 100644 drivers/media/radio/dsbr100.c delete mode 100644 drivers/media/video/dsbr100.c (limited to 'drivers') diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index de3128a31de..220076b1b95 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -350,5 +350,15 @@ config RADIO_ZOLTRIX_PORT help Enter the I/O port of your Zoltrix radio card. -endmenu +config USB_DSBR + tristate "D-Link USB FM radio support (EXPERIMENTAL)" + depends on USB && VIDEO_V4L1 && EXPERIMENTAL + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + To compile this driver as a module, choose M here: the + module will be called dsbr100. +endmenu diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index e95b6805e00..cf55a18e3dd 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -20,5 +20,6 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o +obj-$(CONFIG_USB_DSBR) += dsbr100.o EXTRA_CFLAGS += -Isound diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c new file mode 100644 index 00000000000..f7e33f9ee8e --- /dev/null +++ b/drivers/media/radio/dsbr100.c @@ -0,0 +1,430 @@ +/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs + into both the USB and an analog audio input, so this thing + only deals with initialisation and frequency setting, the + audio data has to be handled by a sound driver. + + Major issue: I can't find out where the device reports the signal + strength, and indeed the windows software appearantly just looks + at the stereo indicator as well. So, scanning will only find + stereo stations. Sad, but I can't help it. + + Also, the windows program sends oodles of messages over to the + device, and I couldn't figure out their meaning. My suspicion + is that they don't have any:-) + + You might find some interesting stuff about this module at + http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr + + Copyright (c) 2000 Markus Demleitner + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + History: + + Version 0.40: + Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing + + Version 0.30: + Markus: Updates for 2.5.x kernel and more ISO compliant source + + Version 0.25: + PSL and Markus: Cleanup, radio now doesn't stop on device close + + Version 0.24: + Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally + right. Some minor cleanup, improved standalone compilation + + Version 0.23: + Markus: Sign extension bug fixed by declaring transfer_buffer unsigned + + Version 0.22: + Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, + thanks to Mike Cox for pointing the problem out. + + Version 0.21: + Markus: Minor cleanup, warnings if something goes wrong, lame attempt + to adhere to Documentation/CodingStyle + + Version 0.2: + Brad Hards : Fixes to make it work as non-module + Markus: Copyright clarification + + Version 0.01: Markus: initial release + +*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.40" +#define DRIVER_AUTHOR "Markus Demleitner " +#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" + +#define DSB100_VENDOR 0x04b4 +#define DSB100_PRODUCT 0x1002 + +/* Commands the device appears to understand */ +#define DSB100_TUNE 1 +#define DSB100_ONOFF 2 + +#define TB_LEN 16 + +/* Frequency limits in MHz -- these are European values. For Japanese +devices, that would be 76 and 91. */ +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + + +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void usb_dsbr100_disconnect(struct usb_interface *intf); +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static int usb_dsbr100_open(struct inode *inode, struct file *file); +static int usb_dsbr100_close(struct inode *inode, struct file *file); + +static int radio_nr = -1; +module_param(radio_nr, int, 0); + +/* Data for one (physical) device */ +typedef struct { + struct usb_device *usbdev; + struct video_device *videodev; + unsigned char transfer_buffer[TB_LEN]; + int curfreq; + int stereo; + int users; + int removed; +} dsbr100_device; + + +/* File system interface */ +static struct file_operations usb_dsbr100_fops = { + .owner = THIS_MODULE, + .open = usb_dsbr100_open, + .release = usb_dsbr100_close, + .ioctl = usb_dsbr100_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +/* V4L interface */ +static struct video_device dsbr100_videodev_template= +{ + .owner = THIS_MODULE, + .name = "D-Link DSB-R 100", + .type = VID_TYPE_TUNER, + .hardware = VID_HARDWARE_AZTECH, + .fops = &usb_dsbr100_fops, + .release = video_device_release, +}; + +static struct usb_device_id usb_dsbr100_device_table [] = { + { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_dsbr100_driver = { + .name = "dsbr100", + .probe = usb_dsbr100_probe, + .disconnect = usb_dsbr100_disconnect, + .id_table = usb_dsbr100_device_table, +}; + +/* Low-level device interface begins here */ + +/* switch on radio */ +static int dsbr100_start(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + + +/* switch off radio */ +static int dsbr100_stop(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int dsbr100_setfreq(dsbr100_device *radio, int freq) +{ + freq = (freq/16*80)/1000+856; + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_TUNE, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + (freq>>8)&0x00ff, freq&0xff, + radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { + radio->stereo = -1; + return -1; + } + radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); + return (radio->transfer_buffer)[0]; +} + +/* return the device status. This is, in effect, just whether it +sees a stereo signal or not. Pity. */ +static void dsbr100_getstat(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) + radio->stereo = -1; + else + radio->stereo = ! (radio->transfer_buffer[0]&0x01); +} + + +/* USB subsystem interface begins here */ + +/* check if the device is present and register with v4l and +usb if it is */ +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + dsbr100_device *radio; + + if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) + return -ENOMEM; + if (!(radio->videodev = video_device_alloc())) { + kfree(radio); + return -ENOMEM; + } + memcpy(radio->videodev, &dsbr100_videodev_template, + sizeof(dsbr100_videodev_template)); + radio->removed = 0; + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + radio->curfreq = FREQ_MIN*FREQ_MUL; + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, + radio_nr)) { + warn("Could not register video device"); + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + usb_set_intfdata(intf, radio); + return 0; +} + +/* handle unplugging of the device, release data structures +if nothing keeps us from doing it. If something is still +keeping us busy, the release callback of v4l will take care +of releasing it. stv680.c does not relase its private +data, so I don't do this here either. Checking out the +code I'd expect I better did that, but if there's a memory +leak here it's tiny (~50 bytes per disconnect) */ +static void usb_dsbr100_disconnect(struct usb_interface *intf) +{ + dsbr100_device *radio = usb_get_intfdata(intf); + + usb_set_intfdata (intf, NULL); + if (radio) { + video_unregister_device(radio->videodev); + radio->videodev = NULL; + if (radio->users) { + kfree(radio); + } else { + radio->removed = 1; + } + } +} + + +/* Video for Linux interface */ + +static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -EIO; + + switch(cmd) { + case VIDIOCGCAP: { + struct video_capability *v = arg; + + memset(v, 0, sizeof(*v)); + v->type = VID_TYPE_TUNER; + v->channels = 1; + v->audios = 1; + strcpy(v->name, "D-Link R-100 USB FM Radio"); + return 0; + } + case VIDIOCGTUNER: { + struct video_tuner *v = arg; + + dsbr100_getstat(radio); + if(v->tuner) /* Only 1 tuner */ + return -EINVAL; + v->rangelow = FREQ_MIN*FREQ_MUL; + v->rangehigh = FREQ_MAX*FREQ_MUL; + v->flags = VIDEO_TUNER_LOW; + v->mode = VIDEO_MODE_AUTO; + v->signal = radio->stereo*0x7000; + /* Don't know how to get signal strength */ + v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; + strcpy(v->name, "DSB R-100"); + return 0; + } + case VIDIOCSTUNER: { + struct video_tuner *v = arg; + + if(v->tuner!=0) + return -EINVAL; + /* Only 1 tuner so no setting needed ! */ + return 0; + } + case VIDIOCGFREQ: { + int *freq = arg; + + if (radio->curfreq==-1) + return -EINVAL; + *freq = radio->curfreq; + return 0; + } + case VIDIOCSFREQ: { + int *freq = arg; + + radio->curfreq = *freq; + if (dsbr100_setfreq(radio, radio->curfreq)==-1) + warn("Set frequency failed"); + return 0; + } + case VIDIOCGAUDIO: { + struct video_audio *v = arg; + + memset(v, 0, sizeof(*v)); + v->flags |= VIDEO_AUDIO_MUTABLE; + v->mode = VIDEO_SOUND_STEREO; + v->volume = 1; + v->step = 1; + strcpy(v->name, "Radio"); + return 0; + } + case VIDIOCSAUDIO: { + struct video_audio *v = arg; + + if (v->audio) + return -EINVAL; + if (v->flags&VIDEO_AUDIO_MUTE) { + if (dsbr100_stop(radio)==-1) + warn("Radio did not respond properly"); + } + else + if (dsbr100_start(radio)==-1) + warn("Radio did not respond properly"); + return 0; + } + default: + return -ENOIOCTLCMD; + } +} + +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); +} + +static int usb_dsbr100_open(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + radio->users = 1; + if (dsbr100_start(radio)<0) { + warn("Radio did not start up properly"); + radio->users = 0; + return -EIO; + } + dsbr100_setfreq(radio, radio->curfreq); + return 0; +} + +static int usb_dsbr100_close(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + radio->users = 0; + if (radio->removed) { + kfree(radio); + } + return 0; +} + +static int __init dsbr100_init(void) +{ + int retval = usb_register(&usb_dsbr100_driver); + info(DRIVER_VERSION ":" DRIVER_DESC); + return retval; +} + +static void __exit dsbr100_exit(void) +{ + usb_deregister(&usb_dsbr100_driver); +} + +module_init (dsbr100_init); +module_exit (dsbr100_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index fe56862d51e..732bf1e7c32 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" -config USB_DSBR - tristate "D-Link USB FM radio support (EXPERIMENTAL)" - depends on USB && VIDEO_V4L1 && EXPERIMENTAL - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 353d61cfac1..010833d8116 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_USB_DABUSB) += dabusb.o -obj-$(CONFIG_USB_DSBR) += dsbr100.o obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o obj-$(CONFIG_USB_STV680) += stv680.o diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c deleted file mode 100644 index f7e33f9ee8e..00000000000 --- a/drivers/media/video/dsbr100.c +++ /dev/null @@ -1,430 +0,0 @@ -/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs - into both the USB and an analog audio input, so this thing - only deals with initialisation and frequency setting, the - audio data has to be handled by a sound driver. - - Major issue: I can't find out where the device reports the signal - strength, and indeed the windows software appearantly just looks - at the stereo indicator as well. So, scanning will only find - stereo stations. Sad, but I can't help it. - - Also, the windows program sends oodles of messages over to the - device, and I couldn't figure out their meaning. My suspicion - is that they don't have any:-) - - You might find some interesting stuff about this module at - http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr - - Copyright (c) 2000 Markus Demleitner - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - History: - - Version 0.40: - Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing - - Version 0.30: - Markus: Updates for 2.5.x kernel and more ISO compliant source - - Version 0.25: - PSL and Markus: Cleanup, radio now doesn't stop on device close - - Version 0.24: - Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally - right. Some minor cleanup, improved standalone compilation - - Version 0.23: - Markus: Sign extension bug fixed by declaring transfer_buffer unsigned - - Version 0.22: - Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, - thanks to Mike Cox for pointing the problem out. - - Version 0.21: - Markus: Minor cleanup, warnings if something goes wrong, lame attempt - to adhere to Documentation/CodingStyle - - Version 0.2: - Brad Hards : Fixes to make it work as non-module - Markus: Copyright clarification - - Version 0.01: Markus: initial release - -*/ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.40" -#define DRIVER_AUTHOR "Markus Demleitner " -#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" - -#define DSB100_VENDOR 0x04b4 -#define DSB100_PRODUCT 0x1002 - -/* Commands the device appears to understand */ -#define DSB100_TUNE 1 -#define DSB100_ONOFF 2 - -#define TB_LEN 16 - -/* Frequency limits in MHz -- these are European values. For Japanese -devices, that would be 76 and 91. */ -#define FREQ_MIN 87.5 -#define FREQ_MAX 108.0 -#define FREQ_MUL 16000 - - -static int usb_dsbr100_probe(struct usb_interface *intf, - const struct usb_device_id *id); -static void usb_dsbr100_disconnect(struct usb_interface *intf); -static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -static int usb_dsbr100_open(struct inode *inode, struct file *file); -static int usb_dsbr100_close(struct inode *inode, struct file *file); - -static int radio_nr = -1; -module_param(radio_nr, int, 0); - -/* Data for one (physical) device */ -typedef struct { - struct usb_device *usbdev; - struct video_device *videodev; - unsigned char transfer_buffer[TB_LEN]; - int curfreq; - int stereo; - int users; - int removed; -} dsbr100_device; - - -/* File system interface */ -static struct file_operations usb_dsbr100_fops = { - .owner = THIS_MODULE, - .open = usb_dsbr100_open, - .release = usb_dsbr100_close, - .ioctl = usb_dsbr100_ioctl, - .compat_ioctl = v4l_compat_ioctl32, - .llseek = no_llseek, -}; - -/* V4L interface */ -static struct video_device dsbr100_videodev_template= -{ - .owner = THIS_MODULE, - .name = "D-Link DSB-R 100", - .type = VID_TYPE_TUNER, - .hardware = VID_HARDWARE_AZTECH, - .fops = &usb_dsbr100_fops, - .release = video_device_release, -}; - -static struct usb_device_id usb_dsbr100_device_table [] = { - { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); - -/* USB subsystem interface */ -static struct usb_driver usb_dsbr100_driver = { - .name = "dsbr100", - .probe = usb_dsbr100_probe, - .disconnect = usb_dsbr100_disconnect, - .id_table = usb_dsbr100_device_table, -}; - -/* Low-level device interface begins here */ - -/* switch on radio */ -static int dsbr100_start(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_ONOFF, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) - return -1; - return (radio->transfer_buffer)[0]; -} - - -/* switch off radio */ -static int dsbr100_stop(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_ONOFF, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) - return -1; - return (radio->transfer_buffer)[0]; -} - -/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ -static int dsbr100_setfreq(dsbr100_device *radio, int freq) -{ - freq = (freq/16*80)/1000+856; - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - DSB100_TUNE, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - (freq>>8)&0x00ff, freq&0xff, - radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || - usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { - radio->stereo = -1; - return -1; - } - radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); - return (radio->transfer_buffer)[0]; -} - -/* return the device status. This is, in effect, just whether it -sees a stereo signal or not. Pity. */ -static void dsbr100_getstat(dsbr100_device *radio) -{ - if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), - USB_REQ_GET_STATUS, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) - radio->stereo = -1; - else - radio->stereo = ! (radio->transfer_buffer[0]&0x01); -} - - -/* USB subsystem interface begins here */ - -/* check if the device is present and register with v4l and -usb if it is */ -static int usb_dsbr100_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - dsbr100_device *radio; - - if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) - return -ENOMEM; - if (!(radio->videodev = video_device_alloc())) { - kfree(radio); - return -ENOMEM; - } - memcpy(radio->videodev, &dsbr100_videodev_template, - sizeof(dsbr100_videodev_template)); - radio->removed = 0; - radio->users = 0; - radio->usbdev = interface_to_usbdev(intf); - radio->curfreq = FREQ_MIN*FREQ_MUL; - video_set_drvdata(radio->videodev, radio); - if (video_register_device(radio->videodev, VFL_TYPE_RADIO, - radio_nr)) { - warn("Could not register video device"); - video_device_release(radio->videodev); - kfree(radio); - return -EIO; - } - usb_set_intfdata(intf, radio); - return 0; -} - -/* handle unplugging of the device, release data structures -if nothing keeps us from doing it. If something is still -keeping us busy, the release callback of v4l will take care -of releasing it. stv680.c does not relase its private -data, so I don't do this here either. Checking out the -code I'd expect I better did that, but if there's a memory -leak here it's tiny (~50 bytes per disconnect) */ -static void usb_dsbr100_disconnect(struct usb_interface *intf) -{ - dsbr100_device *radio = usb_get_intfdata(intf); - - usb_set_intfdata (intf, NULL); - if (radio) { - video_unregister_device(radio->videodev); - radio->videodev = NULL; - if (radio->users) { - kfree(radio); - } else { - radio->removed = 1; - } - } -} - - -/* Video for Linux interface */ - -static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - if (!radio) - return -EIO; - - switch(cmd) { - case VIDIOCGCAP: { - struct video_capability *v = arg; - - memset(v, 0, sizeof(*v)); - v->type = VID_TYPE_TUNER; - v->channels = 1; - v->audios = 1; - strcpy(v->name, "D-Link R-100 USB FM Radio"); - return 0; - } - case VIDIOCGTUNER: { - struct video_tuner *v = arg; - - dsbr100_getstat(radio); - if(v->tuner) /* Only 1 tuner */ - return -EINVAL; - v->rangelow = FREQ_MIN*FREQ_MUL; - v->rangehigh = FREQ_MAX*FREQ_MUL; - v->flags = VIDEO_TUNER_LOW; - v->mode = VIDEO_MODE_AUTO; - v->signal = radio->stereo*0x7000; - /* Don't know how to get signal strength */ - v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; - strcpy(v->name, "DSB R-100"); - return 0; - } - case VIDIOCSTUNER: { - struct video_tuner *v = arg; - - if(v->tuner!=0) - return -EINVAL; - /* Only 1 tuner so no setting needed ! */ - return 0; - } - case VIDIOCGFREQ: { - int *freq = arg; - - if (radio->curfreq==-1) - return -EINVAL; - *freq = radio->curfreq; - return 0; - } - case VIDIOCSFREQ: { - int *freq = arg; - - radio->curfreq = *freq; - if (dsbr100_setfreq(radio, radio->curfreq)==-1) - warn("Set frequency failed"); - return 0; - } - case VIDIOCGAUDIO: { - struct video_audio *v = arg; - - memset(v, 0, sizeof(*v)); - v->flags |= VIDEO_AUDIO_MUTABLE; - v->mode = VIDEO_SOUND_STEREO; - v->volume = 1; - v->step = 1; - strcpy(v->name, "Radio"); - return 0; - } - case VIDIOCSAUDIO: { - struct video_audio *v = arg; - - if (v->audio) - return -EINVAL; - if (v->flags&VIDEO_AUDIO_MUTE) { - if (dsbr100_stop(radio)==-1) - warn("Radio did not respond properly"); - } - else - if (dsbr100_start(radio)==-1) - warn("Radio did not respond properly"); - return 0; - } - default: - return -ENOIOCTLCMD; - } -} - -static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); -} - -static int usb_dsbr100_open(struct inode *inode, struct file *file) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - radio->users = 1; - if (dsbr100_start(radio)<0) { - warn("Radio did not start up properly"); - radio->users = 0; - return -EIO; - } - dsbr100_setfreq(radio, radio->curfreq); - return 0; -} - -static int usb_dsbr100_close(struct inode *inode, struct file *file) -{ - dsbr100_device *radio=video_get_drvdata(video_devdata(file)); - - if (!radio) - return -ENODEV; - radio->users = 0; - if (radio->removed) { - kfree(radio); - } - return 0; -} - -static int __init dsbr100_init(void) -{ - int retval = usb_register(&usb_dsbr100_driver); - info(DRIVER_VERSION ":" DRIVER_DESC); - return retval; -} - -static void __exit dsbr100_exit(void) -{ - usb_deregister(&usb_dsbr100_driver); -} - -module_init (dsbr100_init); -module_exit (dsbr100_exit); - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From b02dc515914bc37f5e406cc6f622fc06991eb779 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 8 Aug 2006 09:10:12 -0300 Subject: V4L/DVB (4411): Fix minor errors in build files In pwc Kconfig, change 'depends' to 'depends on' In dvb-core Makefile, change '=' to ':=' Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/Makefile | 6 +++--- drivers/media/video/pwc/Kconfig | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile index 11054657fdb..0b5182835cc 100644 --- a/drivers/media/dvb/dvb-core/Makefile +++ b/drivers/media/dvb/dvb-core/Makefile @@ -2,8 +2,8 @@ # Makefile for the kernel DVB device drivers. # -dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ - dvb_ca_en50221.o dvb_frontend.o \ - dvb_net.o dvb_ringbuffer.o dvb_math.o +dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ + dvb_ca_en50221.o dvb_frontend.o \ + dvb_net.o dvb_ringbuffer.o dvb_math.o obj-$(CONFIG_DVB_CORE) += dvb-core.o diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig index 697145e0bf1..8fdf7101d3b 100644 --- a/drivers/media/video/pwc/Kconfig +++ b/drivers/media/video/pwc/Kconfig @@ -30,7 +30,7 @@ config USB_PWC config USB_PWC_DEBUG bool "USB Philips Cameras verbose debug" - depends USB_PWC + depends on USB_PWC help Say Y here in order to have the pwc driver generate verbose debugging messages. -- cgit v1.2.3-70-g09d2 From 17531c168c7b8138b5379a85de788798fc6696e1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 8 Aug 2006 09:10:12 -0300 Subject: V4L/DVB (4416): Cx25840_read4 has wrong endianness. cx25840_read4 assembled the bytes in the wrong order. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 5c2036b40ea..7bb7589a07c 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -104,8 +104,8 @@ u32 cx25840_read4(struct i2c_client * client, u16 addr) if (i2c_master_recv(client, buffer, 4) < 4) return 0; - return (buffer[0] << 24) | (buffer[1] << 16) | - (buffer[2] << 8) | buffer[3]; + return (buffer[3] << 24) | (buffer[2] << 16) | + (buffer[1] << 8) | buffer[0]; } int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask, -- cgit v1.2.3-70-g09d2 From e335fada5afef0658038b6bec432d37f332da9fc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 8 Aug 2006 09:10:15 -0300 Subject: V4L/DVB (4418): Fix broken msp3400 module option 'standard' Due to a wrong statement order the 'standard' module option didn't work for 'G' model chips. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/msp3400-kthreads.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index f2fd9195b3a..ed02ff81138 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -961,10 +961,10 @@ int msp34xxg_thread(void *data) /* setup the chip*/ msp34xxg_reset(client); state->std = state->radio ? 0x40 : msp_standard; - if (state->std != 1) - goto unmute; /* start autodetect */ msp_write_dem(client, 0x20, state->std); + if (state->std != 1) + goto unmute; /* watch autodetect */ v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n"); -- cgit v1.2.3-70-g09d2 From 43c560fa59ef2688d891f6431e972b7763b73a00 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 8 Aug 2006 09:10:15 -0300 Subject: V4L/DVB (4419): Turn on the Low Noise Amplifier of the Samsung tuners. Without the LNA these tuners perform very poorly (read 'unwatchable') when the signal is weak. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-types.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index a167e17c6dc..d7eadc2c298 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -1027,10 +1027,11 @@ static struct tuner_params tuner_tnf_5335mf_params[] = { /* 70-79 */ /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */ +/* '+ 4' turns on the Low Noise Amplifier */ static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = { - { 16 * 130.00 /*MHz*/, 0xce, 0x01, }, - { 16 * 364.50 /*MHz*/, 0xce, 0x02, }, - { 16 * 999.99 , 0xce, 0x08, }, + { 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, }, + { 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, }, + { 16 * 999.99 , 0xce, 0x08 + 4, }, }; static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = { @@ -1060,10 +1061,11 @@ static struct tuner_params tuner_thomson_fe6600_params[] = { /* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */ +/* '+ 4' turns on the Low Noise Amplifier */ static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = { - { 16 * 146.25 /*MHz*/, 0xce, 0x01, }, - { 16 * 428.50 /*MHz*/, 0xce, 0x02, }, - { 16 * 999.99 , 0xce, 0x08, }, + { 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, }, + { 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, }, + { 16 * 999.99 , 0xce, 0x08 + 4, }, }; static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = { -- cgit v1.2.3-70-g09d2 From 8a016dcc8383bedc731bca9fdedae77ff52a6ad7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 8 Aug 2006 09:10:16 -0300 Subject: V4L/DVB (4427): Fix V4L1 Compat for VIDIOCGPICT ioctl Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l1-compat.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index d83a2c84d23..d7c3fcbc80f 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -599,6 +599,10 @@ v4l_compat_translate_ioctl(struct inode *inode, dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err); break; } + + pict->depth = ((fmt2->fmt.pix.bytesperline<<3) + + (fmt2->fmt.pix.width-1) ) + /fmt2->fmt.pix.width; pict->palette = pixelformat_to_palette( fmt2->fmt.pix.pixelformat); break; -- cgit v1.2.3-70-g09d2 From eafa98177a388700d613c187c7716e11869b7171 Mon Sep 17 00:00:00 2001 From: Diego Calleja Date: Tue, 8 Aug 2006 09:10:17 -0300 Subject: V4L/DVB (4430): Quickcam_messenger compilation fix In bugzilla #6943, Maxim Britov reported: "I can enable Logitech quickcam support in .config, but it want be compile. I have to add into drivers/media/video/Makefile: obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/" He's right, just enable that driver as module while disabling every other driver that gets into that directory, nothing will get compiled. This patch fixes the Makefile. Signed-off-by: Diego Calleja Acked-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 010833d8116..e82e511f2a7 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -90,6 +90,7 @@ obj-$(CONFIG_USB_ZC0301) += zc0301/ obj-$(CONFIG_USB_IBMCAM) += usbvideo/ obj-$(CONFIG_USB_KONICAWC) += usbvideo/ obj-$(CONFIG_USB_VICAM) += usbvideo/ +obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/ obj-$(CONFIG_VIDEO_VIVI) += vivi.o -- cgit v1.2.3-70-g09d2 From 0851fb48486c044476b019029245cb9b348fca33 Mon Sep 17 00:00:00 2001 From: Yeasah Pell Date: Tue, 8 Aug 2006 09:10:18 -0300 Subject: V4L/DVB (4431): Add several error checks to dst Signed-off-by: Yeasah Pell Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/bt8xx/dst.c | 58 ++++++++++++++++++++----------------------- 1 file changed, 27 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index d687a14ec0a..06ac899a9a2 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -393,7 +393,7 @@ static int dst_set_bandwidth(struct dst_state *state, fe_bandwidth_t bandwidth) state->bandwidth = bandwidth; if (state->dst_type != DST_TYPE_IS_TERR) - return 0; + return -EOPNOTSUPP; switch (bandwidth) { case BANDWIDTH_6_MHZ: @@ -462,7 +462,7 @@ static int dst_set_symbolrate(struct dst_state *state, u32 srate) state->symbol_rate = srate; if (state->dst_type == DST_TYPE_IS_TERR) { - return 0; + return -EOPNOTSUPP; } dprintk(verbose, DST_INFO, 1, "set symrate %u", srate); srate /= 1000; @@ -504,7 +504,7 @@ static int dst_set_symbolrate(struct dst_state *state, u32 srate) static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation) { if (state->dst_type != DST_TYPE_IS_CABLE) - return 0; + return -EOPNOTSUPP; state->modulation = modulation; switch (modulation) { @@ -1234,7 +1234,7 @@ int dst_command(struct dst_state *state, u8 *data, u8 len) goto error; } if (write_dst(state, data, len)) { - dprintk(verbose, DST_INFO, 1, "Tring to recover.. "); + dprintk(verbose, DST_INFO, 1, "Trying to recover.. "); if ((dst_error_recovery(state)) < 0) { dprintk(verbose, DST_ERROR, 1, "Recovery Failed."); goto error; @@ -1328,15 +1328,13 @@ static int dst_tone_power_cmd(struct dst_state *state) { u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 }; - if (state->dst_type == DST_TYPE_IS_TERR) - return 0; + if (state->dst_type != DST_TYPE_IS_SAT) + return -EOPNOTSUPP; paket[4] = state->tx_tuna[4]; paket[2] = state->tx_tuna[2]; paket[3] = state->tx_tuna[3]; paket[7] = dst_check_sum (paket, 7); - dst_command(state, paket, 8); - - return 0; + return dst_command(state, paket, 8); } static int dst_get_tuna(struct dst_state *state) @@ -1465,7 +1463,7 @@ static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; if (cmd->msg_len > 0 && cmd->msg_len < 5) memcpy(&paket[3], cmd->msg, cmd->msg_len); else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5) @@ -1473,18 +1471,17 @@ static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd else return -EINVAL; paket[7] = dst_check_sum(&paket[0], 7); - dst_command(state, paket, 8); - return 0; + return dst_command(state, paket, 8); } static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { - int need_cmd; + int need_cmd, retval = 0; struct dst_state *state = fe->demodulator_priv; state->voltage = voltage; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; need_cmd = 0; @@ -1506,9 +1503,9 @@ static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) } if (need_cmd) - dst_tone_power_cmd(state); + retval = dst_tone_power_cmd(state); - return 0; + return retval; } static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) @@ -1517,7 +1514,7 @@ static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) state->tone = tone; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; switch (tone) { case SEC_TONE_OFF: @@ -1533,9 +1530,7 @@ static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) default: return -EINVAL; } - dst_tone_power_cmd(state); - - return 0; + return dst_tone_power_cmd(state); } static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) @@ -1543,7 +1538,7 @@ static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) struct dst_state *state = fe->demodulator_priv; if (state->dst_type != DST_TYPE_IS_SAT) - return 0; + return -EOPNOTSUPP; state->minicmd = minicmd; switch (minicmd) { case SEC_MINI_A: @@ -1553,9 +1548,7 @@ static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) state->tx_tuna[3] = 0xff; break; } - dst_tone_power_cmd(state); - - return 0; + return dst_tone_power_cmd(state); } @@ -1608,28 +1601,31 @@ static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct dst_state *state = fe->demodulator_priv; - dst_get_signal(state); + int retval = dst_get_signal(state); *strength = state->decode_strength; - return 0; + return retval; } static int dst_read_snr(struct dvb_frontend *fe, u16 *snr) { struct dst_state *state = fe->demodulator_priv; - dst_get_signal(state); + int retval = dst_get_signal(state); *snr = state->decode_snr; - return 0; + return retval; } static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { + int retval = -EINVAL; struct dst_state *state = fe->demodulator_priv; if (p != NULL) { - dst_set_freq(state, p->frequency); + retval = dst_set_freq(state, p->frequency); + if(retval != 0) + return retval; dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency); if (state->dst_type == DST_TYPE_IS_SAT) { @@ -1647,10 +1643,10 @@ static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_paramet dst_set_symbolrate(state, p->u.qam.symbol_rate); dst_set_modulation(state, p->u.qam.modulation); } - dst_write_tuna(fe); + retval = dst_write_tuna(fe); } - return 0; + return retval; } static int dst_tune_frontend(struct dvb_frontend* fe, -- cgit v1.2.3-70-g09d2 From 013b68bf7cb4edfb8753aac9bde3cb60c84bc067 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 9 Aug 2006 00:07:53 -0400 Subject: [PATCH] myri10ge: always re-enable dummy rdmas in myri10ge_resume Dummy RDMA are always enabled on device startup since commit 9a71db721a2cbb9921b929b2699ab181f5a3c6c0 (to work around buggy PCIe chipsets which do not implement resending properly). But, we also need to always re-enable them when resuming the device. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 06440a86bae..9bdd43ab357 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -2425,7 +2425,7 @@ static int myri10ge_resume(struct pci_dev *pdev) } myri10ge_reset(mgp); - myri10ge_dummy_rdma(mgp, mgp->tx.boundary != 4096); + myri10ge_dummy_rdma(mgp, 1); /* Save configuration space to be restored if the * nic resets due to a parity error */ -- cgit v1.2.3-70-g09d2 From ebc4599990898ecaaace7ed40dfad6d8d9f2a24a Mon Sep 17 00:00:00 2001 From: Horst Hummel Date: Wed, 9 Aug 2006 10:30:22 +0200 Subject: [S390] dasd set offline kernel bug. The request queue flush function of the dasd driver has to dequeue the requests first and then call the end request function. Otherwise a kernel bug in ll_rw_block.c might get triggered. Signed-off-by: Horst Hummel Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4bf03fb67f8..d8e9b95f0a1 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1730,8 +1730,8 @@ dasd_flush_request_queue(struct dasd_device * device) req = elv_next_request(device->request_queue); if (req == NULL) break; - dasd_end_request(req, 0); blkdev_dequeue_request(req); + dasd_end_request(req, 0); } spin_unlock_irq(&device->request_queue_lock); } -- cgit v1.2.3-70-g09d2 From 79860a9a79a17f1bed0713680a3995467405ba49 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 9 Aug 2006 15:04:58 +0100 Subject: [PATCH] PATCH: 2.6.18 oops on boot fix for IDE When the IDE fix for Jmicron went in one piece went walking somewhere (send log shows my end somehow). Without this sometimes you get an oops on boot. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/ide/pci/generic.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 2f962cfa3f7..78810ba982e 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -180,6 +180,36 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = { .channels = 2, .autodma = AUTODMA, .bootable = OFF_BOARD, + },{ /* 15 */ + .name = "JMB361", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 16 */ + .name = "JMB363", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 17 */ + .name = "JMB365", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 18 */ + .name = "JMB366", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, + },{ /* 19 */ + .name = "JMB368", + .init_hwif = init_hwif_generic, + .channels = 2, + .autodma = AUTODMA, + .bootable = OFF_BOARD, } }; -- cgit v1.2.3-70-g09d2 From d0710c7c9eea2145a0614f39dbe9dc8cb4ae14da Mon Sep 17 00:00:00 2001 From: Horst Hummel Date: Thu, 10 Aug 2006 15:45:16 +0200 Subject: [S390] dasd calls kzalloc while holding a spinlock. The dasd function dasd_set_uid calls kzalloc while holding the dasd_devmap_lock. Rearrange the code to do the memory allocation outside the lock. Signed-off-by: Horst Hummel Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_devmap.c | 65 +++++++++++++++++----------------------- drivers/s390/block/dasd_eckd.c | 8 ++--- 2 files changed, 32 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 7f6fdac7470..6fcb28d55a9 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -89,7 +89,7 @@ static char *dasd[256]; module_param_array(dasd, charp, NULL, 0); /* - * Single spinlock to protect devmap structures and lists. + * Single spinlock to protect devmap and servermap structures and lists. */ static DEFINE_SPINLOCK(dasd_devmap_lock); @@ -858,39 +858,6 @@ static struct attribute_group dasd_attr_group = { .attrs = dasd_attrs, }; -/* - * Check if the related storage server is already contained in the - * dasd_serverlist. If server is not contained, create new entry. - * Return 0 if server was already in serverlist, - * 1 if the server was added successfully - * <0 in case of error. - */ -static int -dasd_add_server(struct dasd_uid *uid) -{ - struct dasd_servermap *new, *tmp; - - /* check if server is already contained */ - list_for_each_entry(tmp, &dasd_serverlist, list) - // normale cmp? - if (strncmp(tmp->sid.vendor, uid->vendor, - sizeof(tmp->sid.vendor)) == 0 - && strncmp(tmp->sid.serial, uid->serial, - sizeof(tmp->sid.serial)) == 0) - return 0; - - new = (struct dasd_servermap *) - kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL); - if (!new) - return -ENOMEM; - - strncpy(new->sid.vendor, uid->vendor, sizeof(new->sid.vendor)); - strncpy(new->sid.serial, uid->serial, sizeof(new->sid.serial)); - list_add(&new->list, &dasd_serverlist); - return 1; -} - - /* * Return copy of the device unique identifier. */ @@ -910,6 +877,8 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid) /* * Register the given device unique identifier into devmap struct. + * In addition check if the related storage server is already contained in the + * dasd_serverlist. If server is not contained, create new entry. * Return 0 if server was already in serverlist, * 1 if the server was added successful * <0 in case of error. @@ -918,16 +887,38 @@ int dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid) { struct dasd_devmap *devmap; - int rc; + struct dasd_servermap *srv, *tmp; devmap = dasd_find_busid(cdev->dev.bus_id); if (IS_ERR(devmap)) return PTR_ERR(devmap); + + /* generate entry for servermap */ + srv = (struct dasd_servermap *) + kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL); + if (!srv) + return -ENOMEM; + strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1); + strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1); + + /* server is already contained ? */ spin_lock(&dasd_devmap_lock); devmap->uid = *uid; - rc = dasd_add_server(uid); + list_for_each_entry(tmp, &dasd_serverlist, list) { + if (!memcmp(&srv->sid, &tmp->sid, + sizeof(struct dasd_servermap))) { + kfree(srv); + srv = NULL; + break; + } + } + + /* add servermap to serverlist */ + if (srv) + list_add(&srv->list, &dasd_serverlist); spin_unlock(&dasd_devmap_lock); - return rc; + + return (srv ? 1 : 0); } EXPORT_SYMBOL_GPL(dasd_set_uid); diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 39c2281371b..957ed5db98e 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -468,11 +468,11 @@ dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) return -ENODEV; memset(uid, 0, sizeof(struct dasd_uid)); - strncpy(uid->vendor, confdata->ned1.HDA_manufacturer, - sizeof(uid->vendor) - 1); + memcpy(uid->vendor, confdata->ned1.HDA_manufacturer, + sizeof(uid->vendor) - 1); EBCASC(uid->vendor, sizeof(uid->vendor) - 1); - strncpy(uid->serial, confdata->ned1.HDA_location, - sizeof(uid->serial) - 1); + memcpy(uid->serial, confdata->ned1.HDA_location, + sizeof(uid->serial) - 1); EBCASC(uid->serial, sizeof(uid->serial) - 1); uid->ssid = confdata->neq.subsystemID; if (confdata->ned2.sneq.flags == 0x40) { -- cgit v1.2.3-70-g09d2 From e50d1088bf2e5a68068c5f602be1dcc3e52dc873 Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Tue, 8 Aug 2006 09:44:26 -0400 Subject: pciehp: make pciehp build for powerpc Make pciehp build on powerpc Signed-off-by: Kristen Carlson Accardi Acked-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/pciehp.h | 5 +++++ drivers/pci/hotplug/pciehp_hpc.c | 4 ---- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index ce89f581586..eaea9d36a1b 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -279,6 +279,11 @@ struct hpc_ops { #ifdef CONFIG_ACPI +#include +#include +#include +#include + #define pciehp_get_hp_hw_control_from_firmware(dev) \ pciehp_acpi_get_hp_hw_control_from_firmware(dev) static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev, diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 0d8fb6e607a..6ab3b6cd2b5 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -38,10 +38,6 @@ #include "../pci.h" #include "pciehp.h" -#include -#include -#include -#include #ifdef DEBUG #define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */ #define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */ -- cgit v1.2.3-70-g09d2 From f0c1dc07309f0fe3409b92eb170b648a487b1e81 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 9 Aug 2006 15:25:09 -0400 Subject: PCI: remove dead HOTPLUG_PCI_SHPC_PHPRM_LEGACY option. Nothing in the tree references this config option. Signed-off-by: Dave Jones Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/Kconfig | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 3fae77ffb2f..3c148eaf2f4 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -153,13 +153,6 @@ config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE When in doubt, say N. -config HOTPLUG_PCI_SHPC_PHPRM_LEGACY - bool "For AMD SHPC only: Use $HRT for resource/configuration" - depends on HOTPLUG_PCI_SHPC && !ACPI - help - Say Y here for AMD SHPC. You have to select this option if you are - using this driver on platform with AMD SHPC. - config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE -- cgit v1.2.3-70-g09d2 From b41ee5d62211825cbe5e583cafc2255c91385aee Mon Sep 17 00:00:00 2001 From: David Kuehling Date: Mon, 7 Aug 2006 10:18:48 -0400 Subject: USB: unusual_devs entry for A-VOX WSX-300ER MP3 player This patch (as763) adds an unusual_devs entry for the A-VOX WSX-300ER MP3 player. From: David Kuehling Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2793f9a912b..fd158e063c0 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1240,6 +1240,16 @@ UNUSUAL_DEV( 0x0ed1, 0x7636, 0x0103, 0x0103, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64), +/* David Kuehling : + * for MP3-Player AVOX WSX-300ER (bought in Japan). Reports lots of SCSI + * errors when trying to write. + */ +UNUSUAL_DEV( 0x0f19, 0x0105, 0x0100, 0x0100, + "C-MEX", + "A-VOX", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Michael Stattmann */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", -- cgit v1.2.3-70-g09d2 From 919aeadcfa8e72ec2d6bf7bd405a16c40b8d8ecf Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 3 Aug 2006 09:54:24 +0900 Subject: USB: removed a unbalanced #endif from ohci-au1xxx.c This patch has removed a unbalanced #endif from ohci-au1xxx.c . Please apply before 2.6.18 release. Error message was: In file included from drivers/usb/host/ohci-hcd.c:909: drivers/usb/host/ohci-au1xxx.c:113:2: #endif without #if Signed-off-by: Yoichi Yuasa Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-au1xxx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 822914e2f43..f7a975d5db0 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -110,7 +110,6 @@ static void au1xxx_start_ohc(struct platform_device *dev) printk(KERN_DEBUG __FILE__ ": Clock to USB host has been enabled \n"); -#endif } static void au1xxx_stop_ohc(struct platform_device *dev) -- cgit v1.2.3-70-g09d2 From 7af569abc33ce09d3cb93e9b2160efff2531c59f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 19 Jul 2006 15:39:46 +0200 Subject: USB: appletouch: fix atp_disconnect appletouch uses urb->transfer_dma after having freed the urb, this shows up only if the system is compiled with slab debugging. This patch fixes it by reordering the free calls. Signed-off-by: Johannes Berg Signed-off-by: Vojtech Pavlik Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/appletouch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 9e3f1390337..044faa07e29 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -597,9 +597,9 @@ static void atp_disconnect(struct usb_interface *iface) if (dev) { usb_kill_urb(dev->urb); input_unregister_device(dev->input); - usb_free_urb(dev->urb); usb_buffer_free(dev->udev, dev->datalen, dev->data, dev->urb->transfer_dma); + usb_free_urb(dev->urb); kfree(dev); } printk(KERN_INFO "input: appletouch disconnected\n"); -- cgit v1.2.3-70-g09d2 From 922fdaa692e23bf57a10c16047d993c181991579 Mon Sep 17 00:00:00 2001 From: Norihiko Tomiyama Date: Tue, 8 Aug 2006 14:31:25 +0900 Subject: USB: Additional PID for SHARP W-ZERO3 I write a patch for ipaq.c. Would you like to add upstream tree ? This patch enables a support of "SHARP W-ZERO3(WS004SH)" and "SHARP W-ZERO3[es](WS007SH)". From: Norihiko Tomiyama Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipaq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 7e1bd5d6dfa..9840bade79f 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -251,6 +251,8 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ -- cgit v1.2.3-70-g09d2 From 2011e9249a252e0655807fbe6841f6cfe6b6c197 Mon Sep 17 00:00:00 2001 From: Jonathan Davies Date: Wed, 9 Aug 2006 10:48:03 +0100 Subject: USB: ftdi_sio driver - new PIDs Signed-off-by: Jonathan Davies Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a20da8528a5..15945e806f0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { static struct usb_device_id id_table_combined [] = { + { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 9f7343a4542..8888cd80a49 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -32,6 +32,12 @@ #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ #define FTDI_ACTZWAVE_PID 0xF2D0 -- cgit v1.2.3-70-g09d2 From f54fa84dda211f68f65002efa44142207c886c79 Mon Sep 17 00:00:00 2001 From: Orjan Friberg Date: Tue, 8 Aug 2006 23:31:40 -0700 Subject: USB: usbtest.c: unsigned retval makes ctrl_out return 0 in case of error In my quest to try and figure out why test 14 (control write) doesn't work with my EZ-USB board, I noticed that sometimes testusb reported no error even though the kernel log complained "byte 0 is 0 not 2" etc. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 786e1dbe88e..983e104dd45 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1242,11 +1242,12 @@ done: static int ctrl_out (struct usbtest_dev *dev, unsigned count, unsigned length, unsigned vary) { - unsigned i, j, len, retval; + unsigned i, j, len; + int retval; u8 *buf; char *what = "?"; struct usb_device *udev; - + if (length < 1 || length > 0xffff || vary >= length) return -EINVAL; -- cgit v1.2.3-70-g09d2 From b64ef8afa58f397e1eaba2bd9ecaa6812064d464 Mon Sep 17 00:00:00 2001 From: Edgar Hucek Date: Sun, 13 Aug 2006 23:24:16 -0700 Subject: [PATCH] add imacfb documentation and detection Add basic Machine detection to imacfb and some Ducumentation bits for imacfb. Signed-off-by: Edgar Hucek Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/fb/imacfb.txt | 31 ++++++++++++++++++++++++++++ drivers/video/Kconfig | 2 +- drivers/video/imacfb.c | 49 ++++++++++++++++++++++++++++++++++++++++----- 3 files changed, 76 insertions(+), 6 deletions(-) create mode 100644 Documentation/fb/imacfb.txt (limited to 'drivers') diff --git a/Documentation/fb/imacfb.txt b/Documentation/fb/imacfb.txt new file mode 100644 index 00000000000..759028545a7 --- /dev/null +++ b/Documentation/fb/imacfb.txt @@ -0,0 +1,31 @@ + +What is imacfb? +=============== + +This is a generic EFI platform driver for Intel based Apple computers. +Imacfb is only for EFI booted Intel Macs. + +Supported Hardware +================== + +iMac 17"/20" +Macbook +Macbook Pro 15"/17" +MacMini + +How to use it? +============== + +Imacfb does not have any kind of autodetection of your machine. +You have to add the fillowing kernel parameters in your elilo.conf: + Macbook : + video=imacfb:macbook + MacMini : + video=imacfb:mini + Macbook Pro 15", iMac 17" : + video=imacfb:i17 + Macbook Pro 17", iMac 20" : + video=imacfb:i20 + +-- +Edgar Hucek diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c40b9b8b1e7..702eb933cf8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -554,7 +554,7 @@ config FB_VESA config FB_IMAC bool "Intel-based Macintosh Framebuffer Support" - depends on (FB = y) && X86 + depends on (FB = y) && X86 && EFI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/imacfb.c b/drivers/video/imacfb.c index ff233b84dec..b485bece5fc 100644 --- a/drivers/video/imacfb.c +++ b/drivers/video/imacfb.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include @@ -28,7 +30,7 @@ typedef enum _MAC_TYPE { M_I20, M_MINI, M_MACBOOK, - M_NEW + M_UNKNOWN } MAC_TYPE; /* --------------------------------------------------------------------- */ @@ -52,10 +54,36 @@ static struct fb_fix_screeninfo imacfb_fix __initdata = { }; static int inverse; -static int model = M_NEW; +static int model = M_UNKNOWN; static int manual_height; static int manual_width; +static int set_system(struct dmi_system_id *id) +{ + printk(KERN_INFO "imacfb: %s detected - set system to %ld\n", + id->ident, (long)id->driver_data); + + model = (long)id->driver_data; + + return 0; +} + +static struct dmi_system_id __initdata dmi_system_table[] = { + { set_system, "iMac4,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17}, + { set_system, "MacBookPro1,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17}, + { set_system, "MacBook1,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK}, + { set_system, "Macmini1,1", { + DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME,"Macmini1,1")}, (void *)M_MINI}, + {}, +}; + #define DEFAULT_FB_MEM 1024*1024*16 /* --------------------------------------------------------------------- */ @@ -149,7 +177,6 @@ static int __init imacfb_probe(struct platform_device *dev) screen_info.lfb_linelength = 1472 * 4; screen_info.lfb_base = 0x80010000; break; - case M_NEW: case M_I20: screen_info.lfb_width = 1680; screen_info.lfb_height = 1050; @@ -207,6 +234,10 @@ static int __init imacfb_probe(struct platform_device *dev) size_remap = size_total; imacfb_fix.smem_len = size_remap; +#ifndef __i386__ + screen_info.imacpm_seg = 0; +#endif + if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) { printk(KERN_WARNING "imacfb: cannot reserve video memory at 0x%lx\n", @@ -324,8 +355,16 @@ static int __init imacfb_init(void) int ret; char *option = NULL; - /* ignore error return of fb_get_options */ - fb_get_options("imacfb", &option); + if (!efi_enabled) + return -ENODEV; + if (!dmi_check_system(dmi_system_table)) + return -ENODEV; + if (model == M_UNKNOWN) + return -ENODEV; + + if (fb_get_options("imacfb", &option)) + return -ENODEV; + imacfb_setup(option); ret = platform_driver_register(&imacfb_driver); -- cgit v1.2.3-70-g09d2 From 485311a23c72c87332f9a55ce25e650e40ae3fc7 Mon Sep 17 00:00:00 2001 From: Michal Miroslaw Date: Sun, 13 Aug 2006 23:24:20 -0700 Subject: [PATCH] dm: BUG/OOPS fix Fix BUG I tripped on while testing failover and multipathing. BUG shows up on error path in multipath_ctr() when parse_priority_group() fails after returning at least once without error. The fix is to initialize m->ti early - just after alloc()ing it. BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027c3d2 *pde = 00000000 Oops: 0000 [#3] Modules linked in: qla2xxx ext3 jbd mbcache sg ide_cd cdrom floppy CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010202 (2.6.17.3 #1) EIP is at dm_put_device+0xf/0x3b eax: 00000001 ebx: ee4fcac0 ecx: 00000000 edx: ee4fcac0 esi: ee4fc4e0 edi: ee4fc4e0 ebp: 00000000 esp: c5db3e78 ds: 007b es: 007b ss: 0068 Process multipathd (pid: 15912, threadinfo=c5db2000 task=ef485a90) Stack: ec4eda40 c02816bd ee4fc4c0 00000000 f7e89498 f883e0bc c02816f6 f7e89480 f7e8948c c0281801 ffffffea f7e89480 f883e080 c0281ffe 00000001 00000000 00000004 dfe9cab8 f7a693c0 f883e080 f883e0c0 ca4b99c0 c027c6ee 01400000 Call Trace: free_pgpaths+0x31/0x45 free_priority_group+0x25/0x2e free_multipath+0x35/0x67 multipath_ctr+0x123/0x12d dm_table_add_target+0x11e/0x18b populate_table+0x8a/0xaf table_load+0x52/0xf9 ctl_ioctl+0xca/0xfc table_load+0x0/0xf9 do_ioctl+0x3e/0x43 vfs_ioctl+0x16c/0x178 sys_ioctl+0x48/0x60 syscall_call+0x7/0xb Code: 97 f0 00 00 00 89 c1 83 c9 01 80 e2 01 0f 44 c1 88 43 14 8b 04 24 59 5b 5e 5f 5d c3 53 89 c1 89 d3 ff 4a 08 0f 94 c0 84 c0 74 2a <8b> 01 8b 10 89 d8 e8 f6 fb ff ff 8b 03 8b 53 04 89 50 04 89 02 EIP: [] dm_put_device+0xf/0x3b SS:ESP 0068:c5db3e78 Signed-off-by: Michal Miroslaw Acked-by: Alasdair G Kergon Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-mpath.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 217615b3322..93f701ea87b 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -710,6 +710,8 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, return -EINVAL; } + m->ti = ti; + r = parse_features(&as, m, ti); if (r) goto bad; @@ -751,7 +753,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc, } ti->private = m; - m->ti = ti; return 0; -- cgit v1.2.3-70-g09d2 From 2621e2a155140b01c6ff57b3863cda2922c2c8bd Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Wed, 5 Jul 2006 01:20:51 +0000 Subject: [WATCHDOG] Kconfig typos fix. Three typos in drivers/char/watchdog/Kconfig... Signed-off-by: Matt LaPlante Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index d53f664a4dd..fff89c2d88f 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -45,7 +45,7 @@ config WATCHDOG_NOWAYOUT comment "Watchdog Device Drivers" depends on WATCHDOG -# Architecture Independant +# Architecture Independent config SOFT_WATCHDOG tristate "Software watchdog" @@ -127,7 +127,7 @@ config S3C2410_WATCHDOG enabled. The driver is limited by the speed of the system's PCLK - signal, so with reasonbaly fast systems (PCLK around 50-66MHz) + signal, so with reasonably fast systems (PCLK around 50-66MHz) then watchdog intervals of over approximately 20seconds are unavailable. @@ -423,7 +423,7 @@ config SBC_EPX_C3_WATCHDOG is no way to know if writing to its IO address will corrupt your system or have any real effect. The only way to be sure that this driver does what you want is to make sure you - are runnning it on an EPX-C3 from Winsystems with the watchdog + are running it on an EPX-C3 from Winsystems with the watchdog timer at IO address 0x1ee and 0x1ef. It will write to both those IO ports. Basically, the assumption is made that if you compile this driver into your kernel and/or load it as a module, that you @@ -472,7 +472,7 @@ config INDYDOG tristate "Indy/I2 Hardware Watchdog" depends on WATCHDOG && SGI_IP22 help - Hardwaredriver for the Indy's/I2's watchdog. This is a + Hardware driver for the Indy's/I2's watchdog. This is a watchdog timer that will reboot the machine after a 60 second timer expired and no process has written to /dev/watchdog during that time. -- cgit v1.2.3-70-g09d2 From 2f6c55fc3109bcfa1bb1a112c825e07212c20f37 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 16 Aug 2006 13:49:27 +0200 Subject: [S390] dasd slab cache alignment. The dasd_page_cache should return page addresses and therefore the cache must be created with an alignment of PAGE_SIZE. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_devmap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 6fcb28d55a9..29e48b2ab71 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -264,8 +264,9 @@ dasd_parse_keyword( char *parsestring ) { if (dasd_page_cache) return residual_str; dasd_page_cache = - kmem_cache_create("dasd_page_cache", PAGE_SIZE, 0, - SLAB_CACHE_DMA, NULL, NULL ); + kmem_cache_create("dasd_page_cache", PAGE_SIZE, + PAGE_SIZE, SLAB_CACHE_DMA, + NULL, NULL ); if (!dasd_page_cache) MESSAGE(KERN_WARNING, "%s", "Failed to create slab, " "fixed buffer mode disabled."); -- cgit v1.2.3-70-g09d2 From b18a60e7c2a7f2a17dbd57885621a42d546e2f7d Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 16 Aug 2006 13:49:33 +0200 Subject: [S390] inaccessible PAV alias devices on LPAR. In some situations PAV alias devices on LPAR are not accessible. The initialization procedure required to enable access to PAV alias devices has to be performed per storage server subsystem and not only once per storage server. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_devmap.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 29e48b2ab71..9d0c6e1a0e6 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -48,18 +48,20 @@ struct dasd_devmap { }; /* - * dasd_servermap is used to store the server_id of all storage servers - * accessed by DASD device driver. + * dasd_server_ssid_map contains a globally unique storage server subsystem ID. + * dasd_server_ssid_list contains the list of all subsystem IDs accessed by + * the DASD device driver. */ -struct dasd_servermap { +struct dasd_server_ssid_map { struct list_head list; struct server_id { char vendor[4]; char serial[15]; } sid; + __u16 ssid; }; -static struct list_head dasd_serverlist; +static struct list_head dasd_server_ssid_list; /* * Parameter parsing functions for dasd= parameter. The syntax is: @@ -878,8 +880,9 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid) /* * Register the given device unique identifier into devmap struct. - * In addition check if the related storage server is already contained in the - * dasd_serverlist. If server is not contained, create new entry. + * In addition check if the related storage server subsystem ID is already + * contained in the dasd_server_ssid_list. If subsystem ID is not contained, + * create new entry. * Return 0 if server was already in serverlist, * 1 if the server was added successful * <0 in case of error. @@ -888,26 +891,27 @@ int dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid) { struct dasd_devmap *devmap; - struct dasd_servermap *srv, *tmp; + struct dasd_server_ssid_map *srv, *tmp; devmap = dasd_find_busid(cdev->dev.bus_id); if (IS_ERR(devmap)) return PTR_ERR(devmap); - /* generate entry for servermap */ - srv = (struct dasd_servermap *) - kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL); + /* generate entry for server_ssid_map */ + srv = (struct dasd_server_ssid_map *) + kzalloc(sizeof(struct dasd_server_ssid_map), GFP_KERNEL); if (!srv) return -ENOMEM; strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1); strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1); + srv->ssid = uid->ssid; /* server is already contained ? */ spin_lock(&dasd_devmap_lock); devmap->uid = *uid; - list_for_each_entry(tmp, &dasd_serverlist, list) { + list_for_each_entry(tmp, &dasd_server_ssid_list, list) { if (!memcmp(&srv->sid, &tmp->sid, - sizeof(struct dasd_servermap))) { + sizeof(struct dasd_server_ssid_map))) { kfree(srv); srv = NULL; break; @@ -916,7 +920,7 @@ dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid) /* add servermap to serverlist */ if (srv) - list_add(&srv->list, &dasd_serverlist); + list_add(&srv->list, &dasd_server_ssid_list); spin_unlock(&dasd_devmap_lock); return (srv ? 1 : 0); @@ -987,7 +991,7 @@ dasd_devmap_init(void) INIT_LIST_HEAD(&dasd_hashlists[i]); /* Initialize servermap structure. */ - INIT_LIST_HEAD(&dasd_serverlist); + INIT_LIST_HEAD(&dasd_server_ssid_list); return 0; } -- cgit v1.2.3-70-g09d2 From 2f8af120a159a843948749ea88bcacda9779b132 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 15 Aug 2006 01:39:10 -0700 Subject: [BNX2]: Fix tx race condition. Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 35 +++++++++++++++++++---------------- drivers/net/bnx2.h | 12 +++++------- 2 files changed, 24 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index db73de0d251..2099edbbfdf 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -209,8 +209,10 @@ MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl); static inline u32 bnx2_tx_avail(struct bnx2 *bp) { - u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons); + u32 diff; + smp_mb(); + diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons); if (diff > MAX_TX_DESC_CNT) diff = (diff & MAX_TX_DESC_CNT) - 1; return (bp->tx_ring_size - diff); @@ -1686,15 +1688,20 @@ bnx2_tx_int(struct bnx2 *bp) } bp->tx_cons = sw_cons; + /* Need to make the tx_cons update visible to bnx2_start_xmit() + * before checking for netif_queue_stopped(). Without the + * memory barrier, there is a small possibility that bnx2_start_xmit() + * will miss it and cause the queue to be stopped forever. + */ + smp_mb(); - if (unlikely(netif_queue_stopped(bp->dev))) { - spin_lock(&bp->tx_lock); + if (unlikely(netif_queue_stopped(bp->dev)) && + (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) { + netif_tx_lock(bp->dev); if ((netif_queue_stopped(bp->dev)) && - (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) { - + (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) netif_wake_queue(bp->dev); - } - spin_unlock(&bp->tx_lock); + netif_tx_unlock(bp->dev); } } @@ -3503,6 +3510,8 @@ bnx2_init_tx_ring(struct bnx2 *bp) struct tx_bd *txbd; u32 val; + bp->tx_wake_thresh = bp->tx_ring_size / 2; + txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32; @@ -4390,10 +4399,8 @@ bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) #endif /* Called with netif_tx_lock. - * hard_start_xmit is pseudo-lockless - a lock is only required when - * the tx queue is full. This way, we get the benefit of lockless - * operations most of the time without the complexities to handle - * netif_stop_queue/wake_queue race conditions. + * bnx2_tx_int() runs without netif_tx_lock unless it needs to call + * netif_wake_queue(). */ static int bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) @@ -4512,12 +4519,9 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) { - spin_lock(&bp->tx_lock); netif_stop_queue(dev); - - if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS) + if (bnx2_tx_avail(bp) > bp->tx_wake_thresh) netif_wake_queue(dev); - spin_unlock(&bp->tx_lock); } return NETDEV_TX_OK; @@ -5628,7 +5632,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pdev = pdev; spin_lock_init(&bp->phy_lock); - spin_lock_init(&bp->tx_lock); INIT_WORK(&bp->reset_task, bnx2_reset_task, bp); dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 658c5ee95c7..fe804763c60 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -3890,10 +3890,6 @@ struct bnx2 { u32 tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES))); u16 tx_prod; - struct tx_bd *tx_desc_ring; - struct sw_bd *tx_buf_ring; - int tx_ring_size; - u16 tx_cons __attribute__((aligned(L1_CACHE_BYTES))); u16 hw_tx_cons; @@ -3916,9 +3912,11 @@ struct bnx2 { struct sw_bd *rx_buf_ring; struct rx_bd *rx_desc_ring[MAX_RX_RINGS]; - /* Only used to synchronize netif_stop_queue/wake_queue when tx */ - /* ring is full */ - spinlock_t tx_lock; + /* TX constants */ + struct tx_bd *tx_desc_ring; + struct sw_bd *tx_buf_ring; + int tx_ring_size; + u32 tx_wake_thresh; /* End of fields used in the performance code paths. */ -- cgit v1.2.3-70-g09d2 From 932f3772cf76cc1b1fd1538ceee3edba9bf2164f Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 15 Aug 2006 01:39:36 -0700 Subject: [BNX2]: Convert to netdev_alloc_skb() Convert dev_alloc_skb() to netdev_alloc_skb() and increase default rx ring size to 255. The old ring size of 100 was too small. Update version to 1.4.44. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 2099edbbfdf..652eb05a6c2 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.4.43" -#define DRV_MODULE_RELDATE "June 28, 2006" +#define DRV_MODULE_VERSION "1.4.44" +#define DRV_MODULE_RELDATE "August 10, 2006" #define RUN_AT(x) (jiffies + (x)) @@ -1571,7 +1571,7 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) struct rx_bd *rxbd = &bp->rx_desc_ring[RX_RING(index)][RX_IDX(index)]; unsigned long align; - skb = dev_alloc_skb(bp->rx_buf_size); + skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size); if (skb == NULL) { return -ENOMEM; } @@ -1580,7 +1580,6 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) skb_reserve(skb, 8 - align); } - skb->dev = bp->dev; mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); @@ -1793,7 +1792,7 @@ bnx2_rx_int(struct bnx2 *bp, int budget) if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) { struct sk_buff *new_skb; - new_skb = dev_alloc_skb(len + 2); + new_skb = netdev_alloc_skb(bp->dev, len + 2); if (new_skb == NULL) goto reuse_rx; @@ -1804,7 +1803,6 @@ bnx2_rx_int(struct bnx2 *bp, int budget) skb_reserve(new_skb, 2); skb_put(new_skb, len); - new_skb->dev = bp->dev; bnx2_reuse_rx_skb(bp, skb, sw_ring_cons, sw_ring_prod); @@ -3961,7 +3959,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode) return -EINVAL; pkt_size = 1514; - skb = dev_alloc_skb(pkt_size); + skb = netdev_alloc_skb(bp->dev, pkt_size); if (!skb) return -ENOMEM; packet = skb_put(skb, pkt_size); @@ -5754,7 +5752,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->mac_addr[5] = (u8) reg; bp->tx_ring_size = MAX_TX_DESC_CNT; - bnx2_set_rx_ring_size(bp, 100); + bnx2_set_rx_ring_size(bp, 255); bp->rx_csum = 1; -- cgit v1.2.3-70-g09d2 From d4274b51a5c8147b5341e15927368e75b632d297 Mon Sep 17 00:00:00 2001 From: Panagiotis Issaris Date: Tue, 15 Aug 2006 16:01:07 -0700 Subject: [PPP]: handle kmalloc failures and convert to using kzalloc The PPP code contains two kmalloc()s followed by memset()s without handling a possible memory allocation failure. (Suggested by Joe Perches). And furthermore, conversions from kmalloc+memset to kzalloc. [akpm@osdl.org: fix error-path leak] [akpm@osdl.org: cleanups] [paulus@samba.org: don't add useless printk and cardmap_destroy calls] Signed-off-by: Panagiotis Issaris Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 0ec6e9d57b9..c872f7c6cce 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -192,7 +192,7 @@ struct cardmap { void *ptr[CARDMAP_WIDTH]; }; static void *cardmap_get(struct cardmap *map, unsigned int nr); -static void cardmap_set(struct cardmap **map, unsigned int nr, void *ptr); +static int cardmap_set(struct cardmap **map, unsigned int nr, void *ptr); static unsigned int cardmap_find_first_free(struct cardmap *map); static void cardmap_destroy(struct cardmap **map); @@ -1995,10 +1995,9 @@ ppp_register_channel(struct ppp_channel *chan) { struct channel *pch; - pch = kmalloc(sizeof(struct channel), GFP_KERNEL); + pch = kzalloc(sizeof(struct channel), GFP_KERNEL); if (pch == 0) return -ENOMEM; - memset(pch, 0, sizeof(struct channel)); pch->ppp = NULL; pch->chan = chan; chan->ppp = pch; @@ -2408,13 +2407,12 @@ ppp_create_interface(int unit, int *retp) int ret = -ENOMEM; int i; - ppp = kmalloc(sizeof(struct ppp), GFP_KERNEL); + ppp = kzalloc(sizeof(struct ppp), GFP_KERNEL); if (!ppp) goto out; dev = alloc_netdev(0, "", ppp_setup); if (!dev) goto out1; - memset(ppp, 0, sizeof(struct ppp)); ppp->mru = PPP_MRU; init_ppp_file(&ppp->file, INTERFACE); @@ -2454,11 +2452,16 @@ ppp_create_interface(int unit, int *retp) } atomic_inc(&ppp_unit_count); - cardmap_set(&all_ppp_units, unit, ppp); + ret = cardmap_set(&all_ppp_units, unit, ppp); + if (ret != 0) + goto out3; + mutex_unlock(&all_ppp_mutex); *retp = 0; return ppp; +out3: + atomic_dec(&ppp_unit_count); out2: mutex_unlock(&all_ppp_mutex); free_netdev(dev); @@ -2695,7 +2698,7 @@ static void *cardmap_get(struct cardmap *map, unsigned int nr) return NULL; } -static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) +static int cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) { struct cardmap *p; int i; @@ -2704,8 +2707,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) if (p == NULL || (nr >> p->shift) >= CARDMAP_WIDTH) { do { /* need a new top level */ - struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL); - memset(np, 0, sizeof(*np)); + struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto enomem; np->ptr[0] = p; if (p != NULL) { np->shift = p->shift + CARDMAP_ORDER; @@ -2719,8 +2723,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) while (p->shift > 0) { i = (nr >> p->shift) & CARDMAP_MASK; if (p->ptr[i] == NULL) { - struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL); - memset(np, 0, sizeof(*np)); + struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto enomem; np->shift = p->shift - CARDMAP_ORDER; np->parent = p; p->ptr[i] = np; @@ -2735,6 +2740,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr) set_bit(i, &p->inuse); else clear_bit(i, &p->inuse); + return 0; + enomem: + return -ENOMEM; } static unsigned int cardmap_find_first_free(struct cardmap *map) -- cgit v1.2.3-70-g09d2