From 694718d8ad2f0b11d7376f8aa32b1befff6e5966 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 17 Oct 2011 16:59:25 +0200 Subject: b43: fill ctl1 word on all newer PHYs, fix PHY errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/xmit.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 58ea0e5fabf..b62d4a15c53 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -175,6 +175,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp, } } +/* TODO: verify if needed for SSLPN or LCN */ static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate) { const struct b43_phy *phy = &dev->phy; @@ -256,6 +257,9 @@ int b43_generate_txhdr(struct b43_wldev *dev, unsigned int plcp_fragment_len; u32 mac_ctl = 0; u16 phy_ctl = 0; + bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP || + phy->type == B43_PHYTYPE_N || + phy->type == B43_PHYTYPE_HT); u8 extra_ft = 0; struct ieee80211_rate *txrate; struct ieee80211_tx_rate *rates; @@ -531,7 +535,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, extra_ft |= B43_TXH_EFT_RTSFB_CCK; if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS && - phy->type == B43_PHYTYPE_N) { + fill_phy_ctl1) { txhdr->phy_ctl1_rts = cpu_to_le16( b43_generate_tx_phy_ctl1(dev, rts_rate)); txhdr->phy_ctl1_rts_fb = cpu_to_le16( @@ -552,7 +556,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, break; } - if (phy->type == B43_PHYTYPE_N) { + if (fill_phy_ctl1) { txhdr->phy_ctl1 = cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate)); txhdr->phy_ctl1_fb = -- cgit v1.2.3-70-g09d2 From 73d51f38c736ae286372e90056a7f31519f555ac Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 17 Oct 2011 17:15:44 +0200 Subject: b43: HT-PHY: report signal to mac80211 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/xmit.c | 7 +++++++ drivers/net/wireless/b43/xmit.h | 16 +++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index b62d4a15c53..5f77cbe0b6a 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -740,7 +740,14 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) /* Link quality statistics */ switch (chanstat & B43_RX_CHAN_PHYTYPE) { + case B43_PHYTYPE_HT: + /* TODO: is max the right choice? */ + status.signal = max_t(__s8, + max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1), + rxhdr->phy_ht_power2); + break; case B43_PHYTYPE_N: + /* Broadcom has code for min and avg, but always uses max */ if (rxhdr->power0 == 16 || rxhdr->power0 == 32) status.signal = max(rxhdr->power1, rxhdr->power2); else diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h index 16c514d54af..98d90747836 100644 --- a/drivers/net/wireless/b43/xmit.h +++ b/drivers/net/wireless/b43/xmit.h @@ -249,6 +249,12 @@ struct b43_rxhdr_fw4 { } __packed; } __packed; union { + /* HT-PHY */ + struct { + PAD_BYTES(1); + __s8 phy_ht_power0; + } __packed; + /* RSSI for N-PHYs */ struct { __s8 power2; @@ -257,7 +263,15 @@ struct b43_rxhdr_fw4 { __le16 phy_status2; /* PHY RX Status 2 */ } __packed; - __le16 phy_status3; /* PHY RX Status 3 */ + union { + /* HT-PHY */ + struct { + __s8 phy_ht_power1; + __s8 phy_ht_power2; + } __packed; + + __le16 phy_status3; /* PHY RX Status 3 */ + } __packed; union { /* Tested with 598.314, 644.1001 and 666.2 */ struct { -- cgit v1.2.3-70-g09d2 From ae8e46723f803057daff392bdc93332be2f0ec98 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 29 Oct 2011 11:30:15 +0200 Subject: brcm80211: smac: eliminate a null pointer dereference in dma.c Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall Acked-by: Arend van Spriel Signed-off-by: Julian Calaby Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/dma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c index b56a30297c2..6ebec8f4284 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c @@ -358,13 +358,14 @@ static uint nrxdactive(struct dma_info *di, uint h, uint t) static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags) { - uint dmactrlflags = di->dma.dmactrlflags; + uint dmactrlflags; if (di == NULL) { - DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name)); + DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n")); return 0; } + dmactrlflags = di->dma.dmactrlflags; dmactrlflags &= ~mask; dmactrlflags |= flags; -- cgit v1.2.3-70-g09d2 From db652e4b36e5f1e5f49a4a49caf3aa365fe851c4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 6 Nov 2011 22:58:31 +0100 Subject: net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params() If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl Reviewed-by: Srivatsa S. Bhat Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index dae8dbb24a0..8a3f9598ad3 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1469,7 +1469,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid, s32 rssi, const u8 *ie_buf, size_t ie_len, u16 beacon_period, u16 cap_info_bitmap, u8 band) { - struct mwifiex_bssdescriptor *bss_desc = NULL; + struct mwifiex_bssdescriptor *bss_desc; int ret; unsigned long flags; u8 *beacon_ie; @@ -1484,6 +1484,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid, beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL); if (!beacon_ie) { + kfree(bss_desc); dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n"); return -ENOMEM; } -- cgit v1.2.3-70-g09d2 From d13431ca3eb2a2c14314f04813cdc11cd869f150 Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Tue, 8 Nov 2011 14:30:22 +0800 Subject: Bluetooth: Add support for Broadcom BCM20702A0 Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f9b726091ad..fe4ebc375b3 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -100,6 +100,9 @@ static struct usb_device_id btusb_table[] = { /* Canyon CN-BTU1 with HID interfaces */ { USB_DEVICE(0x0c10, 0x0000) }, + /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x413c, 0x8197) }, + { } /* Terminating entry */ }; -- cgit v1.2.3-70-g09d2 From a59be0811c322f80aaa886b144239393efece42d Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Tue, 8 Nov 2011 14:01:13 +0100 Subject: ath: Fix NULL ptr dereference in ath_reg_apply_world_flags This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/ath/regd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 028310f263c..f1be57f0f5b 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -253,6 +253,8 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; + if (!sband) + return; /* * If no country IE has been received always enable active scan -- cgit v1.2.3-70-g09d2 From cc438fccd5783c9f7b4c4858358ac897dcf8a58d Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Tue, 8 Nov 2011 15:54:46 +0200 Subject: wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira Acked-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 128ccb79318..fc29c671cf3 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -559,7 +559,7 @@ wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl, break; } /* Fail if SSID isn't present in the filters */ - if (j == req->n_ssids) { + if (j == cmd->n_ssids) { ret = -EINVAL; goto out_free; } -- cgit v1.2.3-70-g09d2