From e3e09f2645b435062a34a2587a32ae8e5a5b48ab Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Tue, 21 Feb 2012 21:26:28 +0000 Subject: phy: IC+101G and PHY_HAS_INTERRUPT flag This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series. Also the patch does a simple dity-up to signal that the driver actually is for IP101A LF and IP101G devices. In fact, these are two similar PHYs that have the same IDs and mainly differ for the EEE capability supported in the G series. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 7ee4f5822bb..0856e1b7a84 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -30,16 +30,16 @@ #include #include -MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers"); +MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers"); MODULE_AUTHOR("Michael Barkowski"); MODULE_LICENSE("GPL"); -/* IP101A/IP1001 */ -#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ -#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ -#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ -#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ -#define IP101A_APS_ON 2 /* IP101A APS Mode bit */ +/* IP101A/G - IP1001 */ +#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ +#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ +#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ +#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ static int ip175c_config_init(struct phy_device *phydev) { @@ -151,7 +151,7 @@ static int ip1001_config_init(struct phy_device *phydev) return 0; } -static int ip101a_config_init(struct phy_device *phydev) +static int ip101a_g_config_init(struct phy_device *phydev) { int c; @@ -161,7 +161,7 @@ static int ip101a_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); - c |= IP101A_APS_ON; + c |= IP101A_G_APS_ON; return c; } @@ -203,6 +203,7 @@ static struct phy_driver ip1001_driver = { .phy_id_mask = 0x0ffffff0, .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_INTERRUPT, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, @@ -211,13 +212,14 @@ static struct phy_driver ip1001_driver = { .driver = { .owner = THIS_MODULE,}, }; -static struct phy_driver ip101a_driver = { +static struct phy_driver ip101a_g_driver = { .phy_id = 0x02430c54, - .name = "ICPlus IP101A", + .name = "ICPlus IP101A/G", .phy_id_mask = 0x0ffffff0, .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .config_init = &ip101a_config_init, + .flags = PHY_HAS_INTERRUPT, + .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .suspend = genphy_suspend, @@ -233,7 +235,7 @@ static int __init icplus_init(void) if (ret < 0) return -ENODEV; - ret = phy_driver_register(&ip101a_driver); + ret = phy_driver_register(&ip101a_g_driver); if (ret < 0) return -ENODEV; @@ -243,7 +245,7 @@ static int __init icplus_init(void) static void __exit icplus_exit(void) { phy_driver_unregister(&ip1001_driver); - phy_driver_unregister(&ip101a_driver); + phy_driver_unregister(&ip101a_g_driver); phy_driver_unregister(&ip175c_driver); } @@ -253,6 +255,7 @@ module_exit(icplus_exit); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { 0x02430d80, 0x0ffffff0 }, { 0x02430d90, 0x0ffffff0 }, + { 0x02430c54, 0x0ffffff0 }, { } }; -- cgit v1.2.3-70-g09d2