From e555db930f7512491485cfc43df4306192835373 Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 19 Apr 2007 13:59:59 -0500 Subject: [SCSI] use sysfs configured timeout for EH Start Unit timeout Use the sysfs configurable timeout when issuing a START_UNIT command from the scsi error handler. This is needed for devices which take longer than thirty seconds to respond to the start unit. The problem was observed when sending a start unit to a disk array device in an ipr RAID adapter, which results in the adapter firmware sending potentially multiple commands to physical devices as a result of this command, which ended up timing out sometimes. This patch does not change the default value used for this command. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 3963e7013bd..e8350c562d2 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -38,7 +38,6 @@ #include "scsi_logging.h" #define SENSE_TIMEOUT (10*HZ) -#define START_UNIT_TIMEOUT (30*HZ) /* * These should *probably* be handled by the host itself. @@ -936,7 +935,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - START_UNIT_TIMEOUT, 0); + scmd->device->timeout, 0); if (rtn == SUCCESS) return 0; -- cgit v1.2.3-70-g09d2