From f08b7e9f551fa74219bf32df483fb95c58aad94b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 30 Mar 2009 17:34:04 +0000 Subject: powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook The (relatively) new pmac_zilog driver doesn't use the pre-munged IRQ numbers from the macio_dev unlike other macio things, it directly maps it off the OF device-tree. It does that because it can be initialized much earlier than the registration of the macio devices, in order to get a serial console early. Unfortunately, that means that it "misses" some fixups done by the macio layer to work around missing interrupt descriptions in the device-tree of the Wallstreet machines. This patch brings the necessary workaround into the pmac_zilog driver itself to bring it back to working condition. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/serial/pmac_zilog.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index ad348850401..9c1243fbd51 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1538,6 +1538,21 @@ no_dma: uap->port.type = PORT_PMAC_ZILOG; uap->port.flags = 0; + /* + * Fixup for the port on Gatwick for which the device-tree has + * missing interrupts. Normally, the macio_dev would contain + * fixed up interrupt info, but we use the device-tree directly + * here due to early probing so we need the fixup too. + */ + if (uap->port.irq == NO_IRQ && + np->parent && np->parent->parent && + of_device_is_compatible(np->parent->parent, "gatwick")) { + /* IRQs on gatwick are offset by 64 */ + uap->port.irq = irq_create_mapping(NULL, 64 + 15); + uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); + uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); + } + /* Setup some valid baud rate information in the register * shadows so we don't write crap there before baud rate is * first initialized. -- cgit v1.2.3-70-g09d2