From f234081bc564c69eb0e2cd4e957ad1cbae4a6144 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 01:22:39 -0300 Subject: V4L/DVB (7002): cx25840: Add basic CX23885 AVCore support The cx23885/7/8 PCIe bridge has an internal AVCore modelled on the cx2584x family. Many of the registers positions are identical but some moved. The register values are also different because the different bridges run at different clock rates. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-audio.c | 65 ++++++-- drivers/media/video/cx25840/cx25840-core.c | 219 ++++++++++++++++++++++--- drivers/media/video/cx25840/cx25840-core.h | 1 + drivers/media/video/cx25840/cx25840-firmware.c | 5 + 4 files changed, 253 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c index 51fc0af0157..d6421e1e8f6 100644 --- a/drivers/media/video/cx25840/cx25840-audio.c +++ b/drivers/media/video/cx25840/cx25840-audio.c @@ -32,11 +32,17 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) /* common for all inputs and rates */ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */ - cx25840_write(client, 0x127, 0x50); + if (!state->is_cx23885) + cx25840_write(client, 0x127, 0x50); if (state->aud_input != CX25840_AUDIO_SERIAL) { switch (freq) { case 32000: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1006040f); @@ -53,6 +59,11 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 44100: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1009040f); @@ -69,6 +80,11 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 48000: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x100a040f); @@ -87,6 +103,11 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) } else { switch (freq) { case 32000: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1e08040f); @@ -109,6 +130,12 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 44100: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } + /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1809040f); @@ -128,22 +155,33 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 48000: - /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x180a040f); + if (!state->is_cx23885) { + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x180a040f); - /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0x0098d6e5); + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0x0098d6e5); + } if (state->is_cx25836) break; - /* src1_ctl = 0x08010000 */ - cx25840_write4(client, 0x8f8, 0x08018000); + if (!state->is_cx23885) { + /* src1_ctl */ + cx25840_write4(client, 0x8f8, 0x08018000); - /* src3/4/6_ctl = 0x08020000 */ - cx25840_write4(client, 0x900, 0x08015555); - cx25840_write4(client, 0x904, 0x08015555); - cx25840_write4(client, 0x90c, 0x08015555); + /* src3/4/6_ctl */ + cx25840_write4(client, 0x900, 0x08015555); + cx25840_write4(client, 0x904, 0x08015555); + cx25840_write4(client, 0x90c, 0x08015555); + } else { + + cx25840_write4(client, 0x8f8, 0x0801867c); + + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + } break; } } @@ -188,6 +226,11 @@ void cx25840_audio_set_path(struct i2c_client *client) /* deassert soft reset */ cx25840_and_or(client, 0x810, ~0x1, 0x00); + + if (state->is_cx23885) { + /* Ensure the controller is running when we exit */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } } static int get_volume(struct i2c_client *client) diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 0d3d24aff50..756a1eeb274 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -13,6 +13,8 @@ * NTSC sliced VBI support by Christopher Neufeld * with additional fixes by Hans Verkuil . * + * CX23885 support by Steven Toth . + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 @@ -255,6 +257,96 @@ static void cx25840_initialize(struct i2c_client *client) cx25840_and_or(client, 0x803, ~0x10, 0x10); } +static void cx23885_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = i2c_get_clientdata(client); + struct workqueue_struct *q; + + /* Internal Reset */ + cx25840_and_or(client, 0x102, ~0x01, 0x01); + cx25840_and_or(client, 0x102, ~0x01, 0x00); + + /* Stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + + /* DIF in reset? */ + cx25840_write(client, 0x398, 0); + + /* Trust the default xtal, no division */ + /* This changes for the cx23888 products */ + cx25840_write(client, 0x2, 0x76); + + /* Bring down the regulator for AUX clk */ + cx25840_write(client, 0x1, 0x40); + + /* Sys PLL frac */ + cx25840_write4(client, 0x11c, 0x01d1744c); + + /* Sys PLL int */ + cx25840_write4(client, 0x118, 0x00000416); + + /* Disable DIF bypass */ + cx25840_write4(client, 0x33c, 0x00000001); + + /* DIF Src phase inc */ + cx25840_write4(client, 0x340, 0x0df7df83); + + /* Vid PLL frac */ + cx25840_write4(client, 0x10c, 0x01b6db7b); + + /* Vid PLL int */ + cx25840_write4(client, 0x108, 0x00000512); + + /* Luma */ + cx25840_write4(client, 0x414, 0x00107d12); + + /* Chroma */ + cx25840_write4(client, 0x420, 0x3d008282); + + /* Aux PLL frac */ + cx25840_write4(client, 0x114, 0x017dbf48); + + /* Aux PLL int */ + cx25840_write4(client, 0x110, 0x000a030e); + + /* ADC2 input select */ + cx25840_write(client, 0x102, 0x10); + + /* VIN1 & VIN5 */ + cx25840_write(client, 0x103, 0x11); + + /* Enable format auto detect */ + cx25840_write(client, 0x400, 0); + /* Fast subchroma lock */ + /* White crush, Chroma AGC & Chroma Killer enabled */ + cx25840_write(client, 0x401, 0xe8); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + cx25840_vbi_setup(client); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); +} + /* ----------------------------------------------------------------------- */ static void input_change(struct i2c_client *client) @@ -318,9 +410,22 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp vid_input <= CX25840_COMPOSITE8); u8 reg; - v4l_dbg(1, cx25840_debug, client, "decoder set video input %d, audio input %d\n", - vid_input, aud_input); + v4l_dbg(1, cx25840_debug, client, + "decoder set video input %d, audio input %d\n", + vid_input, aud_input); + if (vid_input >= CX25840_VIN1_CH1) { + v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n", + vid_input); + reg = vid_input & 0xff; + if ((vid_input & CX25840_SVIDEO_ON) == CX25840_SVIDEO_ON) + is_composite = 0; + else + is_composite = 1; + + v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n", + reg, is_composite); + } else if (is_composite) { reg = 0xf0 + (vid_input - CX25840_COMPOSITE1); } else { @@ -330,7 +435,8 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp if ((vid_input & ~0xff0) || luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 || chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { - v4l_err(client, "0x%04x is not a valid video input!\n", vid_input); + v4l_err(client, "0x%04x is not a valid video input!\n", + vid_input); return -EINVAL; } reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4); @@ -343,31 +449,49 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp } } - switch (aud_input) { - case CX25840_AUDIO_SERIAL: - /* do nothing, use serial audio input */ - break; - case CX25840_AUDIO4: reg &= ~0x30; break; - case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; - case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; - case CX25840_AUDIO7: reg &= ~0xc0; break; - case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; + /* The caller has previously prepared the correct routing + * configuration in reg (for the cx23885) so we have no + * need to attempt to flip bits for earlier av decoders. + */ + if (!state->is_cx23885) { + switch (aud_input) { + case CX25840_AUDIO_SERIAL: + /* do nothing, use serial audio input */ + break; + case CX25840_AUDIO4: reg &= ~0x30; break; + case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; + case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; + case CX25840_AUDIO7: reg &= ~0xc0; break; + case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; - default: - v4l_err(client, "0x%04x is not a valid audio input!\n", aud_input); - return -EINVAL; + default: + v4l_err(client, "0x%04x is not a valid audio input!\n", + aud_input); + return -EINVAL; + } } cx25840_write(client, 0x103, reg); + /* Set INPUT_MODE to Composite (0) or S-Video (1) */ cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02); - /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ - cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); - /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ - if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) - cx25840_and_or(client, 0x102, ~0x4, 4); - else - cx25840_and_or(client, 0x102, ~0x4, 0); + + if (!state->is_cx23885) { + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ + cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); + /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */ + if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) + cx25840_and_or(client, 0x102, ~0x4, 4); + else + cx25840_and_or(client, 0x102, ~0x4, 0); + } else { + if (is_composite) + /* ADC2 input select channel 2 */ + cx25840_and_or(client, 0x102, ~0x2, 0); + else + /* ADC2 input select channel 3 */ + cx25840_and_or(client, 0x102, ~0x2, 2); + } state->vid_input = vid_input; state->aud_input = aud_input; @@ -375,6 +499,25 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp cx25840_audio_set_path(client); input_change(client); } + + if (state->is_cx23885) { + /* Audio channel 1 src : Parallel 1 */ + cx25840_write(client, 0x124, 0x03); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ + cx25840_write(client, 0x914, 0xa0); + + /* I2S_OUT_CTL: + * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 + * I2S_OUT_MASTER_MODE = Master + */ + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + } + return 0; } @@ -853,6 +996,8 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, state->is_initialized = 1; if (state->is_cx25836) cx25836_initialize(client); + else if (state->is_cx23885) + cx23885_initialize(client); else cx25840_initialize(client); } @@ -870,6 +1015,7 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (cmd == VIDIOC_DBG_G_REGISTER) reg->val = cx25840_read(client, reg->reg & 0x0fff); else @@ -886,14 +1032,26 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, case VIDIOC_STREAMON: v4l_dbg(1, cx25840_debug, client, "enable output\n"); - cx25840_write(client, 0x115, state->is_cx25836 ? 0x0c : 0x8c); - cx25840_write(client, 0x116, state->is_cx25836 ? 0x04 : 0x07); + if (state->is_cx23885) { + u8 v = (cx25840_read(client, 0x421) | 0x0b); + cx25840_write(client, 0x421, v); + } else { + cx25840_write(client, 0x115, + state->is_cx25836 ? 0x0c : 0x8c); + cx25840_write(client, 0x116, + state->is_cx25836 ? 0x04 : 0x07); + } break; case VIDIOC_STREAMOFF: v4l_dbg(1, cx25840_debug, client, "disable output\n"); - cx25840_write(client, 0x115, 0x00); - cx25840_write(client, 0x116, 0x00); + if (state->is_cx23885) { + u8 v = cx25840_read(client, 0x421) & ~(0x0b); + cx25840_write(client, 0x421, v); + } else { + cx25840_write(client, 0x115, 0x00); + cx25840_write(client, 0x116, 0x00); + } break; case VIDIOC_LOG_STATUS: @@ -1056,6 +1214,8 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, case VIDIOC_INT_RESET: if (state->is_cx25836) cx25836_initialize(client); + else if (state->is_cx23885) + cx23885_initialize(client); else cx25840_initialize(client); break; @@ -1086,6 +1246,7 @@ static int cx25840_probe(struct i2c_client *client) device_id = cx25840_read(client, 0x101) << 8; device_id |= cx25840_read(client, 0x100); + v4l_dbg(1, cx25840_debug, client, "device_id = 0x%04x\n", device_id); /* The high byte of the device ID should be * 0x83 for the cx2583x and 0x84 for the cx2584x */ @@ -1094,6 +1255,10 @@ static int cx25840_probe(struct i2c_client *client) } else if ((device_id & 0xff00) == 0x8400) { id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf); + } else if (device_id == 0x0000) { + id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; + } else if (device_id == 0x1313) { + id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; } else { v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n"); @@ -1115,6 +1280,7 @@ static int cx25840_probe(struct i2c_client *client) i2c_set_clientdata(client, state); state->c = client; state->is_cx25836 = ((device_id & 0xff00) == 0x8300); + state->is_cx23885 = (device_id == 0x0000) || (device_id == 0x1313); state->vid_input = CX25840_COMPOSITE7; state->aud_input = CX25840_AUDIO8; state->audclk_freq = 48000; @@ -1124,6 +1290,7 @@ static int cx25840_probe(struct i2c_client *client) state->vbi_line_offset = 8; state->id = id; state->rev = device_id; + return 0; } diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h index ea669b1f084..95093edc918 100644 --- a/drivers/media/video/cx25840/cx25840-core.h +++ b/drivers/media/video/cx25840/cx25840-core.h @@ -47,6 +47,7 @@ struct cx25840_state { u32 id; u32 rev; int is_cx25836; + int is_cx23885; int is_initialized; wait_queue_head_t fw_wait; /* wake up when the fw load is finished */ struct work_struct fw_work; /* work entry for fw load */ diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c index e852024a5ea..1ddf724a2c7 100644 --- a/drivers/media/video/cx25840/cx25840-firmware.c +++ b/drivers/media/video/cx25840/cx25840-firmware.c @@ -24,6 +24,7 @@ #include "cx25840-core.h" #define FWFILE "v4l-cx25840.fw" +#define FWFILE_CX23885 "v4l-cx23885-avcore-01.fw" /* * Mike Isely - The FWSEND parameter controls the @@ -92,10 +93,14 @@ static int fw_write(struct i2c_client *client, u8 * data, int size) int cx25840_loadfw(struct i2c_client *client) { + struct cx25840_state *state = i2c_get_clientdata(client); const struct firmware *fw = NULL; u8 buffer[4], *ptr; int size, send, retval; + if (state->is_cx23885) + firmware = FWFILE_CX23885; + if (request_firmware(&fw, firmware, FWDEV(client)) != 0) { v4l_err(client, "unable to open firmware %s\n", firmware); return -EINVAL; -- cgit v1.2.3-70-g09d2