From 7e6d06f0de3f74ca929441add094518ae332257c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 30 Jul 2012 15:57:44 +0000 Subject: sfc: Fix maximum number of TSO segments and minimum TX queue size Currently an skb requiring TSO may not fit within a minimum-size TX queue. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This issue is designated as CVE-2012-3412. Set the maximum number of TSO segments for our devices to 100. This should make no difference to behaviour unless the actual MSS is less than about 700. Increase the minimum TX queue size accordingly to allow for 2 worst-case skbs, so that there will definitely be space to add an skb after we wake a queue. To avoid invalidating existing configurations, change efx_ethtool_set_ringparam() to fix up values that are too small rather than returning -EINVAL. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 6 ++++++ drivers/net/ethernet/sfc/efx.h | 14 ++++++++++---- drivers/net/ethernet/sfc/ethtool.c | 16 +++++++++++----- drivers/net/ethernet/sfc/tx.c | 19 +++++++++++++++++++ 4 files changed, 46 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 70554a1b2b0..65a8d49106a 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -1503,6 +1503,11 @@ static int efx_probe_all(struct efx_nic *efx) goto fail2; } + BUILD_BUG_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_RXQ_MIN_ENT); + if (WARN_ON(EFX_DEFAULT_DMAQ_SIZE < EFX_TXQ_MIN_ENT(efx))) { + rc = -EINVAL; + goto fail3; + } efx->rxq_entries = efx->txq_entries = EFX_DEFAULT_DMAQ_SIZE; rc = efx_probe_filters(efx); @@ -2070,6 +2075,7 @@ static int efx_register_netdev(struct efx_nic *efx) net_dev->irq = efx->pci_dev->irq; net_dev->netdev_ops = &efx_netdev_ops; SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops); + net_dev->gso_max_segs = EFX_TSO_MAX_SEGS; rtnl_lock(); diff --git a/drivers/net/ethernet/sfc/efx.h b/drivers/net/ethernet/sfc/efx.h index be8f9158a71..70755c97251 100644 --- a/drivers/net/ethernet/sfc/efx.h +++ b/drivers/net/ethernet/sfc/efx.h @@ -30,6 +30,7 @@ extern netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb); extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index); extern int efx_setup_tc(struct net_device *net_dev, u8 num_tc); +extern unsigned int efx_tx_max_skb_descs(struct efx_nic *efx); /* RX */ extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue); @@ -52,10 +53,15 @@ extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue); #define EFX_MAX_EVQ_SIZE 16384UL #define EFX_MIN_EVQ_SIZE 512UL -/* The smallest [rt]xq_entries that the driver supports. Callers of - * efx_wake_queue() assume that they can subsequently send at least one - * skb. Falcon/A1 may require up to three descriptors per skb_frag. */ -#define EFX_MIN_RING_SIZE (roundup_pow_of_two(2 * 3 * MAX_SKB_FRAGS)) +/* Maximum number of TCP segments we support for soft-TSO */ +#define EFX_TSO_MAX_SEGS 100 + +/* The smallest [rt]xq_entries that the driver supports. RX minimum + * is a bit arbitrary. For TX, we must have space for at least 2 + * TSO skbs. + */ +#define EFX_RXQ_MIN_ENT 128U +#define EFX_TXQ_MIN_ENT(efx) (2 * efx_tx_max_skb_descs(efx)) /* Filters */ extern int efx_probe_filters(struct efx_nic *efx); diff --git a/drivers/net/ethernet/sfc/ethtool.c b/drivers/net/ethernet/sfc/ethtool.c index 10536f93b56..8cba2df82b1 100644 --- a/drivers/net/ethernet/sfc/ethtool.c +++ b/drivers/net/ethernet/sfc/ethtool.c @@ -680,21 +680,27 @@ static int efx_ethtool_set_ringparam(struct net_device *net_dev, struct ethtool_ringparam *ring) { struct efx_nic *efx = netdev_priv(net_dev); + u32 txq_entries; if (ring->rx_mini_pending || ring->rx_jumbo_pending || ring->rx_pending > EFX_MAX_DMAQ_SIZE || ring->tx_pending > EFX_MAX_DMAQ_SIZE) return -EINVAL; - if (ring->rx_pending < EFX_MIN_RING_SIZE || - ring->tx_pending < EFX_MIN_RING_SIZE) { + if (ring->rx_pending < EFX_RXQ_MIN_ENT) { netif_err(efx, drv, efx->net_dev, - "TX and RX queues cannot be smaller than %ld\n", - EFX_MIN_RING_SIZE); + "RX queues cannot be smaller than %u\n", + EFX_RXQ_MIN_ENT); return -EINVAL; } - return efx_realloc_channels(efx, ring->rx_pending, ring->tx_pending); + txq_entries = max(ring->tx_pending, EFX_TXQ_MIN_ENT(efx)); + if (txq_entries != ring->tx_pending) + netif_warn(efx, drv, efx->net_dev, + "increasing TX queue size to minimum of %u\n", + txq_entries); + + return efx_realloc_channels(efx, ring->rx_pending, txq_entries); } static int efx_ethtool_set_pauseparam(struct net_device *net_dev, diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index 9b225a7769f..18713436b44 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -119,6 +119,25 @@ efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr) return len; } +unsigned int efx_tx_max_skb_descs(struct efx_nic *efx) +{ + /* Header and payload descriptor for each output segment, plus + * one for every input fragment boundary within a segment + */ + unsigned int max_descs = EFX_TSO_MAX_SEGS * 2 + MAX_SKB_FRAGS; + + /* Possibly one more per segment for the alignment workaround */ + if (EFX_WORKAROUND_5391(efx)) + max_descs += EFX_TSO_MAX_SEGS; + + /* Possibly more for PCIe page boundaries within input fragments */ + if (PAGE_SIZE > EFX_PAGE_SIZE) + max_descs += max_t(unsigned int, MAX_SKB_FRAGS, + DIV_ROUND_UP(GSO_MAX_SIZE, EFX_PAGE_SIZE)); + + return max_descs; +} + /* * Add a socket buffer to a TX queue * -- cgit v1.2.3-70-g09d2 From 8b6d5c09bc0c49aea041486d77c2f67e98ae0bc3 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 31 Jul 2012 11:39:37 +0000 Subject: bnx2x: fix mem leak when command is unknown In bnx2x_mcast_enqueue_cmd() we'll leak the memory allocated to 'new_cmd' if we hit the deafault case of the 'switch (cmd)'. Add a 'kfree(new_cmd)' to that case to avoid the leak. Signed-off-by: Jesper Juhl Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 734fd87cd99..62f754bd0df 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -2485,6 +2485,7 @@ static int bnx2x_mcast_enqueue_cmd(struct bnx2x *bp, break; default: + kfree(new_cmd); BNX2X_ERR("Unknown command: %d\n", cmd); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From c263c2c1ad615e935d563cd7be11d417f94895d9 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 23 Jul 2012 18:20:12 +0200 Subject: bcma: BCM43228 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/bcma/host_pci.c | 1 + drivers/bcma/sprom.c | 4 +++- include/linux/bcma/bcma_driver_chipcommon.h | 6 ++++++ 3 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c index 11b32d2642d..a6e5672c67e 100644 --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c index 26823d97fd9..9ea4627dc0c 100644 --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c @@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus) /* for these chips OTP is always available */ present = true; break; - + case BCMA_CHIP_ID_BCM43228: + present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT; + break; default: present = false; break; diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 3c80885fa82..d323a4b4143 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -89,6 +89,12 @@ #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001 +#define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002 +#define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004 +#define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008 +#define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010 +#define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020 #define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ #define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ #define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ -- cgit v1.2.3-70-g09d2 From 828afd26fe78f87d0bd1dfce64c561f78c1a8969 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 23 Jul 2012 22:57:01 +0200 Subject: b43: fix logic in GPIO init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add some comments by the way Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b80352b308d..a140165dfee 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev) if (dev->dev->chip_id == 0x4301) { mask |= 0x0060; set |= 0x0060; + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ } - if (dev->dev->chip_id == 0x5354) - set &= 0xff02; + if (0 /* FIXME: conditional unknown */ ) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0100); - mask |= 0x0180; - set |= 0x0180; + /* BT Coexistance Input */ + mask |= 0x0080; + set |= 0x0080; + /* BT Coexistance Out */ + mask |= 0x0100; + set |= 0x0100; } if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) { + /* PA is controlled by gpio 9, let ucode handle it */ b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); mask |= 0x0200; set |= 0x0200; } - if (dev->dev->core_rev >= 2) - mask |= 0x0010; /* FIXME: This is redundant. */ switch (dev->dev->bus_type) { #ifdef CONFIG_B43_BCMA case B43_BUS_BCMA: bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL, (bcma_cc_read32(&dev->dev->bdev->bus->drv_cc, - BCMA_CC_GPIOCTL) & mask) | set); + BCMA_CC_GPIOCTL) & ~mask) | set); break; #endif #ifdef CONFIG_B43_SSB @@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev) if (gpiodev) ssb_write32(gpiodev, B43_GPIO_CONTROL, (ssb_read32(gpiodev, B43_GPIO_CONTROL) - & mask) | set); + & ~mask) | set); break; #endif } -- cgit v1.2.3-70-g09d2 From 9d5d496c3464b7ad0ba942b4ada5f27c07e07079 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 30 Jul 2012 22:58:04 +0100 Subject: libertas: don't reset card on error when it is being removed On an OLPC XO-1.5 we have seen the following situation: - the system starts going into suspend - no wake params are set, so the mmc layer removes the card - during remove, we send a command to the card - that command fails, causing if_sdio's reset method to try and remove the mmc card in attempt to reset it - the mmc layer is not happy about being asked to remove a card that it is already removing, and the kernel crashes While the MMC layer could possibly be taught to behave better here, it also seems sensible for libertas not to try and reset a card if we're in the process of removing it anyway. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 58048189bd2..fe1ea43c514 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -571,7 +571,10 @@ static int lbs_thread(void *data) netdev_info(dev, "Timeout submitting command 0x%04x\n", le16_to_cpu(cmdnode->cmdbuf->command)); lbs_complete_command(priv, cmdnode, -ETIMEDOUT); - if (priv->reset_card) + + /* Reset card, but only when it isn't in the process + * of being shutdown anyway. */ + if (!dev->dismantle && priv->reset_card) priv->reset_card(priv); } priv->cmd_timed_out = 0; -- cgit v1.2.3-70-g09d2 From 16ebd60856bc5d980722cb85b259a4d5b301e94a Mon Sep 17 00:00:00 2001 From: Woody Hung Date: Tue, 31 Jul 2012 21:53:33 +0800 Subject: rt2x00 : fix rt3290 resuming failed. This patch is going to fix the resuming failed from S3/S4 for rt3290 chip. Signed-off-by: Woody Hung Cc: Kevin Chou Signed-off-by: Chen, Chien-Chia Reviewed-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 68 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800pci.c | 71 --------------------------------- 2 files changed, 68 insertions(+), 71 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 88455b1b9fe..cb8c2aca54e 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, mutex_unlock(&rt2x00dev->csr_mutex); } +static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + int i, count; + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + if (rt2x00_get_field32(reg, WLAN_EN)) + return 0; + + rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); + rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); + rt2x00_set_field32(®, WLAN_CLK_EN, 0); + rt2x00_set_field32(®, WLAN_EN, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + + udelay(REGISTER_BUSY_DELAY); + + count = 0; + do { + /* + * Check PLL_LD & XTAL_RDY. + */ + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, CMB_CTRL, ®); + if (rt2x00_get_field32(reg, PLL_LD) && + rt2x00_get_field32(reg, XTAL_RDY)) + break; + udelay(REGISTER_BUSY_DELAY); + } + + if (i >= REGISTER_BUSY_COUNT) { + + if (count >= 10) + return -EIO; + + rt2800_register_write(rt2x00dev, 0x58, 0x018); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x418); + udelay(REGISTER_BUSY_DELAY); + rt2800_register_write(rt2x00dev, 0x58, 0x618); + udelay(REGISTER_BUSY_DELAY); + count++; + } else { + count = 0; + } + + rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); + rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); + rt2x00_set_field32(®, WLAN_CLK_EN, 1); + rt2x00_set_field32(®, WLAN_RESET, 1); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2x00_set_field32(®, WLAN_RESET, 0); + rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); + udelay(10); + rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); + } while (count != 0); + + return 0; +} + void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, const u8 command, const u8 token, const u8 arg0, const u8 arg1) @@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, { unsigned int i; u32 reg; + int retval; + + if (rt2x00_rt(rt2x00dev, RT3290)) { + retval = rt2800_enable_wlan_rt3290(rt2x00dev); + if (retval) + return -EBUSY; + } /* * If driver doesn't wake up firmware here, diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 235376e9cb0..98aa426a356 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) return rt2800_validate_eeprom(rt2x00dev); } -static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - int i, count; - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - if (rt2x00_get_field32(reg, WLAN_EN)) - return 0; - - rt2x00_set_field32(®, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff); - rt2x00_set_field32(®, FRC_WL_ANT_SET, 1); - rt2x00_set_field32(®, WLAN_CLK_EN, 0); - rt2x00_set_field32(®, WLAN_EN, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - - udelay(REGISTER_BUSY_DELAY); - - count = 0; - do { - /* - * Check PLL_LD & XTAL_RDY. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, CMB_CTRL, ®); - if (rt2x00_get_field32(reg, PLL_LD) && - rt2x00_get_field32(reg, XTAL_RDY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - if (i >= REGISTER_BUSY_COUNT) { - - if (count >= 10) - return -EIO; - - rt2800_register_write(rt2x00dev, 0x58, 0x018); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x418); - udelay(REGISTER_BUSY_DELAY); - rt2800_register_write(rt2x00dev, 0x58, 0x618); - udelay(REGISTER_BUSY_DELAY); - count++; - } else { - count = 0; - } - - rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, ®); - rt2x00_set_field32(®, PCIE_APP0_CLK_REQ, 0); - rt2x00_set_field32(®, WLAN_CLK_EN, 1); - rt2x00_set_field32(®, WLAN_RESET, 1); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2x00_set_field32(®, WLAN_RESET, 0); - rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg); - udelay(10); - rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff); - } while (count != 0); - - return 0; -} static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; @@ -1062,17 +1002,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) if (retval) return retval; - /* - * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan - * clk for rt3290. That avoid the MCU fail in start phase. - */ - if (rt2x00_rt(rt2x00dev, RT3290)) { - retval = rt2800_enable_wlan_rt3290(rt2x00dev); - - if (retval) - return retval; - } - /* * This device has multiple filters for control frames * and has a separate filter for PS Poll frames. -- cgit v1.2.3-70-g09d2 From 8c1057e43c99e393fe2e14cca879affcb516d36b Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 1 Aug 2012 21:35:36 +0100 Subject: libertas: fix two memory leaks The if_sdio_card structure was never being freed, and neither was the command structure used for association. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 1 + drivers/net/wireless/libertas/if_sdio.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index eb5de800ed9..1c10b542ab2 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -1254,6 +1254,7 @@ static int lbs_associate(struct lbs_private *priv, netif_tx_wake_all_queues(priv->dev); } + kfree(cmd); done: lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 76caebaa439..e970897f6ab 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1314,6 +1314,7 @@ static void if_sdio_remove(struct sdio_func *func) kfree(packet); } + kfree(card); lbs_deb_leave(LBS_DEB_SDIO); } -- cgit v1.2.3-70-g09d2 From 7f38e5bc93203bc76b215dcd2df2067b5b0e004c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 1 Aug 2012 15:58:43 -0500 Subject: brcmsmac: use channel flags to restrict OFDM brcmsmac cannot call freq_reg_info() during channel changes as it does not hold cfg80211_lock, and as a result it generates a lockdep warning. freq_reg_info() is being used to determine whether OFDM is allowed on the current channel, so we can avoid the errant call by using the new IEEE80211_CHAN_NO_OFDM for this purpose instead. Reported-by: Josh Boyer Signed-off-by: Seth Forshee Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 5 +---- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 3 ++- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 9a4c63f927c..7ed7d757702 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -382,9 +382,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, { struct brcms_c_info *wlc = wlc_cm->wlc; struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; - const struct ieee80211_reg_rule *reg_rule; struct txpwr_limits txpwr; - int ret; brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr); @@ -393,8 +391,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, ); /* set or restore gmode as required by regulatory */ - ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, ®_rule); - if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM)) + if (ch->flags & IEEE80211_CHAN_NO_OFDM) brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false); else brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 9e79d47e077..192ad5c1fcc 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -121,7 +121,8 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = { IEEE80211_CHAN_NO_HT40PLUS), CHAN2GHZ(14, 2484, IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS | - IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS | + IEEE80211_CHAN_NO_OFDM) }; static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = { -- cgit v1.2.3-70-g09d2 From d4e5979c0da95791aa717c18e162540c7a596360 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Thu, 2 Aug 2012 11:58:50 +0530 Subject: ath9k: Add PID/VID support for AR1111 AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: stable@vger.kernel.org [2.6.39+] Cc: Felix Bitterli Reported-by: Tim Bentley Signed-off-by: Mohammed Shafi Shajakhan Tested-by: Tim Bentley Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 1 + drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/pci.c | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index cfa91ab7acf..60b6a9daff7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -730,6 +730,7 @@ int ath9k_hw_init(struct ath_hw *ah) case AR9300_DEVID_QCA955X: case AR9300_DEVID_AR9580: case AR9300_DEVID_AR9462: + case AR9485_DEVID_AR1111: break; default: if (common->bus_ops->ath_bus_type == ATH_USB) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index dd0c146d81d..ce7332c64ef 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -49,6 +49,7 @@ #define AR9300_DEVID_AR9462 0x0034 #define AR9300_DEVID_AR9330 0x0035 #define AR9300_DEVID_QCA955X 0x0038 +#define AR9485_DEVID_AR1111 0x0037 #define AR5416_AR9100_DEVID 0x000b diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 87b89d55e63..d455de9162e 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */ { PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */ { PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */ + { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E AR1111/AR9485 */ { 0 } }; -- cgit v1.2.3-70-g09d2 From f3f9f332e231abaf28e14344733b7d000b830f7c Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 3 Aug 2012 02:36:51 +0000 Subject: emulex: benet: Add a missing CR in the end of message Missing a CR in printk causes 2 messages printed in one line. Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index c60de89b666..90a903d83d8 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1948,7 +1948,7 @@ static int be_rx_cqs_create(struct be_adapter *adapter) if (adapter->num_rx_qs != MAX_RX_QS) dev_info(&adapter->pdev->dev, - "Created only %d receive queues", adapter->num_rx_qs); + "Created only %d receive queues\n", adapter->num_rx_qs); return 0; } -- cgit v1.2.3-70-g09d2 From c8c40b7f32abe0878ee693480fb2f7453d80add5 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Fri, 3 Aug 2012 00:38:36 +0000 Subject: net/mlx4_en: loopbacked packets are dropped when SMAC=DMAC Should NOT check SMAC=DMAC when: 1. loopback is turned on 2. validate_loopback is true. Fixed it accordingly. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index f32e7030077..5aba5ecdf1e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -614,8 +614,8 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud /* If source MAC is equal to our own MAC and not performing * the selftest or flb disabled - drop the packet */ if (s_mac == priv->mac && - (!(dev->features & NETIF_F_LOOPBACK) || - !priv->validate_loopback)) + !((dev->features & NETIF_F_LOOPBACK) || + priv->validate_loopback)) goto next; /* -- cgit v1.2.3-70-g09d2 From c18520bd1b244fe8e3ac5358137321780a70d6e7 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Fri, 3 Aug 2012 00:38:37 +0000 Subject: net/mlx4_en: Fixing TX queue stop/wake flow Removing the ring->blocked flag, it is redundant and leads to a race: We close the TX queue and then set the "blocked" flag. Between those 2 operations the completion function can check the "blocked" flag, sees that it is 0, and wouldn't open the TX queue. Using netif_tx_queue_stopped to check the state of the queue to avoid this race. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 17 +++++++---------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 - 2 files changed, 7 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 019d856b133..10bba09c44e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -164,7 +164,6 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, ring->cons = 0xffffffff; ring->last_nr_txbb = 1; ring->poll_cnt = 0; - ring->blocked = 0; memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info)); memset(ring->buf, 0, ring->buf_size); @@ -365,14 +364,13 @@ static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq) ring->cons += txbbs_skipped; netdev_tx_completed_queue(ring->tx_queue, packets, bytes); - /* Wakeup Tx queue if this ring stopped it */ - if (unlikely(ring->blocked)) { - if ((u32) (ring->prod - ring->cons) <= - ring->size - HEADROOM - MAX_DESC_TXBBS) { - ring->blocked = 0; - netif_tx_wake_queue(ring->tx_queue); - priv->port_stats.wake_queue++; - } + /* + * Wakeup Tx queue if this stopped, and at least 1 packet + * was completed + */ + if (netif_tx_queue_stopped(ring->tx_queue) && txbbs_skipped > 0) { + netif_tx_wake_queue(ring->tx_queue); + priv->port_stats.wake_queue++; } } @@ -592,7 +590,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->size - HEADROOM - MAX_DESC_TXBBS)) { /* every full Tx ring stops queue */ netif_tx_stop_queue(ring->tx_queue); - ring->blocked = 1; priv->port_stats.queue_stopped++; return NETDEV_TX_BUSY; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 5f1ab105deb..9d27e42264e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -248,7 +248,6 @@ struct mlx4_en_tx_ring { u32 doorbell_qpn; void *buf; u16 poll_cnt; - int blocked; struct mlx4_en_tx_info *tx_info; u8 *bounce_buf; u32 last_nr_txbb; -- cgit v1.2.3-70-g09d2 From 2207b60ffb6545040e2e2620fced13deba7643c2 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Fri, 3 Aug 2012 00:38:38 +0000 Subject: net/mlx4_core: Remove port type restrictions Port1=Eth, Port2=IB restriction is no longer required. Having RoCE, there will always rdma port initialized over ConnectX physical port, no matter whether the link layer is IB or Ethernet. So we always have dual port IB device. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 --- drivers/net/ethernet/mellanox/mlx4/sense.c | 14 -------------- 2 files changed, 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 48d0e90194c..827b72dfce9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -157,9 +157,6 @@ int mlx4_check_port_params(struct mlx4_dev *dev, "on this HCA, aborting.\n"); return -EINVAL; } - if (port_type[i] == MLX4_PORT_TYPE_ETH && - port_type[i + 1] == MLX4_PORT_TYPE_IB) - return -EINVAL; } } diff --git a/drivers/net/ethernet/mellanox/mlx4/sense.c b/drivers/net/ethernet/mellanox/mlx4/sense.c index 80249829352..34ee09bae36 100644 --- a/drivers/net/ethernet/mellanox/mlx4/sense.c +++ b/drivers/net/ethernet/mellanox/mlx4/sense.c @@ -80,20 +80,6 @@ void mlx4_do_sense_ports(struct mlx4_dev *dev, stype[i - 1] = defaults[i - 1]; } - /* - * Adjust port configuration: - * If port 1 sensed nothing and port 2 is IB, set both as IB - * If port 2 sensed nothing and port 1 is Eth, set both as Eth - */ - if (stype[0] == MLX4_PORT_TYPE_ETH) { - for (i = 1; i < dev->caps.num_ports; i++) - stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_ETH; - } - if (stype[dev->caps.num_ports - 1] == MLX4_PORT_TYPE_IB) { - for (i = 0; i < dev->caps.num_ports - 1; i++) - stype[i] = stype[i] ? stype[i] : MLX4_PORT_TYPE_IB; - } - /* * If sensed nothing, remain in current configuration. */ -- cgit v1.2.3-70-g09d2 From ae9e63bb2c0cf5437d9d13d822b27149336c6e0e Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 3 Aug 2012 09:32:18 +0000 Subject: hyperv: Move wait completion msg code into rndis_filter_halt_device() We need to wait for send_completion msg before put_rndis_request() at the end of rndis_filter_halt_device(). Otherwise, netvsc_send_completion() may reference freed memory which is overwritten, and cause panic. Reported-by: Long Li Reported-by: Jason Wang Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 7 ------- drivers/net/hyperv/rndis_filter.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 6cee2917eb0..4a1a5f58fa7 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -383,13 +383,6 @@ int netvsc_device_remove(struct hv_device *device) unsigned long flags; net_device = hv_get_drvdata(device); - spin_lock_irqsave(&device->channel->inbound_lock, flags); - net_device->destroy = true; - spin_unlock_irqrestore(&device->channel->inbound_lock, flags); - - /* Wait for all send completions */ - wait_event(net_device->wait_drain, - atomic_read(&net_device->num_outstanding_sends) == 0); netvsc_disconnect_vsp(net_device); diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index e5d6146937f..1e88a109593 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -718,6 +718,9 @@ static void rndis_filter_halt_device(struct rndis_device *dev) { struct rndis_request *request; struct rndis_halt_request *halt; + struct netvsc_device *nvdev = dev->net_dev; + struct hv_device *hdev = nvdev->dev; + ulong flags; /* Attempt to do a rndis device halt */ request = get_rndis_request(dev, RNDIS_MSG_HALT, @@ -735,6 +738,14 @@ static void rndis_filter_halt_device(struct rndis_device *dev) dev->state = RNDIS_DEV_UNINITIALIZED; cleanup: + spin_lock_irqsave(&hdev->channel->inbound_lock, flags); + nvdev->destroy = true; + spin_unlock_irqrestore(&hdev->channel->inbound_lock, flags); + + /* Wait for all send completions */ + wait_event(nvdev->wait_drain, + atomic_read(&nvdev->num_outstanding_sends) == 0); + if (request) put_rndis_request(dev, request); return; -- cgit v1.2.3-70-g09d2 From 77f00f6324cb97cf1df6f9c4aaeea6ada23abdb2 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 2 Aug 2012 23:10:01 +0000 Subject: isdnloop: fix and simplify isdnloop_init() Fix a buffer overflow bug by removing the revision and printk. [ 22.016214] isdnloop-ISDN-driver Rev 1.11.6.7 [ 22.097508] isdnloop: (loop0) virtual card added [ 22.174400] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff83244972 [ 22.174400] [ 22.436157] Pid: 1, comm: swapper Not tainted 3.5.0-bisect-00018-gfa8bbb1-dirty #129 [ 22.624071] Call Trace: [ 22.720558] [] ? CallcNew+0x56/0x56 [ 22.815248] [] panic+0x110/0x329 [ 22.914330] [] ? isdnloop_init+0xaf/0xb1 [ 23.014800] [] ? CallcNew+0x56/0x56 [ 23.090763] [] __stack_chk_fail+0x2b/0x30 [ 23.185748] [] isdnloop_init+0xaf/0xb1 Signed-off-by: Fengguang Wu Signed-off-by: David S. Miller --- drivers/isdn/isdnloop/isdnloop.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c index 5405ec644db..baf2686aa8e 100644 --- a/drivers/isdn/isdnloop/isdnloop.c +++ b/drivers/isdn/isdnloop/isdnloop.c @@ -16,7 +16,6 @@ #include #include "isdnloop.h" -static char *revision = "$Revision: 1.11.6.7 $"; static char *isdnloop_id = "loop0"; MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card"); @@ -1494,17 +1493,6 @@ isdnloop_addcard(char *id1) static int __init isdnloop_init(void) { - char *p; - char rev[10]; - - if ((p = strchr(revision, ':'))) { - strcpy(rev, p + 1); - p = strchr(rev, '$'); - *p = 0; - } else - strcpy(rev, " ??? "); - printk(KERN_NOTICE "isdnloop-ISDN-driver Rev%s\n", rev); - if (isdnloop_id) return (isdnloop_addcard(isdnloop_id)); -- cgit v1.2.3-70-g09d2 From f3a1ef9cee4812e2d08c855eb373f0d83433e34c Mon Sep 17 00:00:00 2001 From: Peter Meiser Date: Thu, 2 Aug 2012 02:30:20 +0000 Subject: cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN Hello, looking at http://sourceforge.net/apps/mediawiki/mbm/index.php?title=Main_Page#Supported_devices, there are branded Ericsson devices from Dell and Toshiba. The to-be-added vendor IDs are 0x413c for Dell and 0x0930 for Toshiba. Please find attached a patch to add these vendor IDs. Signed-off-by: Peter Meiser Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index f4ce5957df3..4cd582a4f62 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1225,6 +1225,26 @@ static const struct usb_device_id cdc_devs[] = { .driver_info = (unsigned long) &wwan_info, }, + /* Dell branded MBM devices like DW5550 */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x413c, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + + /* Toshiba branded MBM devices */ + { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO + | USB_DEVICE_ID_MATCH_VENDOR, + .idVendor = 0x0930, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM, + .bInterfaceProtocol = USB_CDC_PROTO_NONE, + .driver_info = (unsigned long) &wwan_info, + }, + /* Generic CDC-NCM devices */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE), -- cgit v1.2.3-70-g09d2 From ff6e1225957cce9e93b8d84dc240e5a44094d0ec Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 3 Aug 2012 14:38:07 +0000 Subject: cris: fix eth_v10.c build error Fix build error on cris (not tested, no toolchain here): drivers/net/cris/eth_v10.c: error: too many arguments to function 'e100rxtx_interrupt' Reported-by: Geert Uytterhoeven Signed-off-by: Randy Dunlap Cc: Mikael Starvik Cc: Jesper Nilsson Cc: linux-cris-kernel@axis.com Signed-off-by: David S. Miller --- drivers/net/cris/eth_v10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index f0c8bd54ce2..021d69c5d9b 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1712,7 +1712,7 @@ e100_set_network_leds(int active) static void e100_netpoll(struct net_device* netdev) { - e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL); + e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev); } #endif -- cgit v1.2.3-70-g09d2 From 925b11f706642732ce2ae53b0f0d3fd54adc5075 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Tue, 31 Jul 2012 01:01:23 +0000 Subject: igb: Fix for failure to init on some 82576 devices. Move nvm invalid size check to before size assigned by mac_type for 82575 and later parts in get_invariants function. This fixes a problem found on some 82576 devices where the part will not initialize because the nvm_read function pointer ends up getting assigned to the incorrect function. Reported By: Stefan Assmann Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/e1000_82575.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 5e84eaac48c..ba994fb4cec 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -254,6 +254,14 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) */ size += NVM_WORD_SIZE_BASE_SHIFT; + /* + * Check for invalid size + */ + if ((hw->mac.type == e1000_82576) && (size > 15)) { + pr_notice("The NVM size is not valid, defaulting to 32K\n"); + size = 15; + } + nvm->word_size = 1 << size; if (hw->mac.type < e1000_i210) { nvm->opcode_bits = 8; @@ -281,14 +289,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) } else nvm->type = e1000_nvm_flash_hw; - /* - * Check for invalid size - */ - if ((hw->mac.type == e1000_82576) && (size > 15)) { - pr_notice("The NVM size is not valid, defaulting to 32K\n"); - size = 15; - } - /* NVM Function Pointers */ switch (hw->mac.type) { case e1000_82580: -- cgit v1.2.3-70-g09d2 From 89d351c046c287f293b4b2fda1d76c4df44b95ce Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 1 Aug 2012 05:41:25 +0000 Subject: igb: correct hardware type (i210/i211) check in igb_loopback_test() In the original code ... if ((adapter->hw.mac.type == e1000_i210) || (adapter->hw.mac.type == e1000_i210)) { ... the second check of 'adapter->hw.mac.type' is pointless since it tests for the exact same value as the first. Signed-off-by: Jesper Juhl Acked-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index a19c84cad0e..ad489b76980 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1783,7 +1783,7 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) goto out; } if ((adapter->hw.mac.type == e1000_i210) - || (adapter->hw.mac.type == e1000_i210)) { + || (adapter->hw.mac.type == e1000_i211)) { dev_err(&adapter->pdev->dev, "Loopback test not supported " "on this part at this time.\n"); -- cgit v1.2.3-70-g09d2 From d836200a1c239a488cd2ed9867f4792f25f721d5 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 1 Aug 2012 05:41:30 +0000 Subject: igb: don't break user visible strings over multiple lines in igb_ethtool.c Even when they go beyond 80 characters, user visible strings should be on one line to make them easy to grep for. Signed-off-by: Jesper Juhl Tested-by: Jeff Pieper Signed-off-by: Peter P Waskiewicz Jr --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index ad489b76980..90550f5e3dd 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -209,8 +209,8 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ if (igb_check_reset_block(hw)) { - dev_err(&adapter->pdev->dev, "Cannot change link " - "characteristics when SoL/IDER is active.\n"); + dev_err(&adapter->pdev->dev, + "Cannot change link characteristics when SoL/IDER is active.\n"); return -EINVAL; } @@ -1089,8 +1089,8 @@ static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, wr32(reg, (_test[pat] & write)); val = rd32(reg) & mask; if (val != (_test[pat] & write & mask)) { - dev_err(&adapter->pdev->dev, "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", + dev_err(&adapter->pdev->dev, + "pattern test reg %04X failed: got 0x%08X expected 0x%08X\n", reg, val, (_test[pat] & write & mask)); *data = reg; return 1; @@ -1108,8 +1108,8 @@ static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, wr32(reg, write & mask); val = rd32(reg); if ((write & mask) != (val & mask)) { - dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:" - " got 0x%08X expected 0x%08X\n", reg, + dev_err(&adapter->pdev->dev, + "set/check reg %04X test failed: got 0x%08X expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; @@ -1171,8 +1171,9 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) wr32(E1000_STATUS, toggle); after = rd32(E1000_STATUS) & toggle; if (value != after) { - dev_err(&adapter->pdev->dev, "failed STATUS register test " - "got: 0x%08X expected: 0x%08X\n", after, value); + dev_err(&adapter->pdev->dev, + "failed STATUS register test got: 0x%08X expected: 0x%08X\n", + after, value); *data = 1; return 1; } @@ -1777,16 +1778,14 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) * sessions are active */ if (igb_check_reset_block(&adapter->hw)) { dev_err(&adapter->pdev->dev, - "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); + "Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } if ((adapter->hw.mac.type == e1000_i210) || (adapter->hw.mac.type == e1000_i211)) { dev_err(&adapter->pdev->dev, - "Loopback test not supported " - "on this part at this time.\n"); + "Loopback test not supported on this part at this time.\n"); *data = 0; goto out; } -- cgit v1.2.3-70-g09d2 From 25099335944a23db75d4916644122c746684e093 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Sat, 4 Aug 2012 00:14:25 +0000 Subject: mISDN: Bugfix for layer2 fixed TEI mode If a fixed TEI is used, the initial state of the layer 2 statmachine need to be 4 (TEI assigned). This was true only for Point to Point connections, but not for the other fixed TEIs. It was not found before, because usually only the TEI 0 is used as fixed TEI for PtP mode, but if you try X31 packet mode connections with SAPI 16, TEI 1, it did fail. Signed-off-by: Karsten Keil Cc: # 3.5.x Signed-off-by: David S. Miller --- drivers/isdn/mISDN/layer2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c index 0dc8abca140..949cabb88f1 100644 --- a/drivers/isdn/mISDN/layer2.c +++ b/drivers/isdn/mISDN/layer2.c @@ -2222,7 +2222,7 @@ create_l2(struct mISDNchannel *ch, u_int protocol, u_long options, int tei, InitWin(l2); l2->l2m.fsm = &l2fsm; if (test_bit(FLG_LAPB, &l2->flag) || - test_bit(FLG_PTP, &l2->flag) || + test_bit(FLG_FIXED_TEI, &l2->flag) || test_bit(FLG_LAPD_NET, &l2->flag)) l2->l2m.state = ST_L2_4; else -- cgit v1.2.3-70-g09d2 From 7cefdd1f55ec075f1f2da0a321495d5a8262ffaa Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 4 Aug 2012 06:50:49 +0000 Subject: drivers/net/phy/mdio-mux-gpio.c: drop devm_kfree of devm_kzalloc'd data devm_kfree should not have to be explicitly used. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x,d; @@ x = devm_kzalloc(...) ... ?-devm_kfree(d,x); // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux-gpio.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c index e0cc4ef33de..eefe49e8713 100644 --- a/drivers/net/phy/mdio-mux-gpio.c +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -101,7 +101,6 @@ err: n--; gpio_free(s->gpio[n]); } - devm_kfree(&pdev->dev, s); return r; } -- cgit v1.2.3-70-g09d2 From f716168b8aee528cf685246f0e7247aa0d08b79c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 4 Aug 2012 23:52:36 +0000 Subject: drivers/atm/iphase.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index d4386019af5..96cce6d5319 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2362,7 +2362,7 @@ static int __devinit ia_init(struct atm_dev *dev) { printk(DEV_LABEL " (itf %d): can't set up page mapping\n", dev->number); - return error; + return -ENOMEM; } IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n", dev->number, iadev->pci->revision, base, iadev->irq);) -- cgit v1.2.3-70-g09d2 From 8b82f7c3c90fa67fd6d5be1deb3cec0e17cc32d9 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 10:30:11 +0000 Subject: ixp4xx_eth: fix ptp_ixp46x build failure When building with ixp4xx_eth and ptp_ixp46x as module, one is getting the following error: ERROR: "ixp46x_phc_index" [drivers/ptp/ptp_ixp46x.ko] undefined! This has been introduced by commit 509a7c25729feab353502e1b544c614772a1d49a. Signed-off-by: Arnaud Patard Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/ixp4xx_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 482648fcf0b..98934bdf6ac 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1003,6 +1003,7 @@ static int ixp4xx_nway_reset(struct net_device *dev) } int ixp46x_phc_index = -1; +EXPORT_SYMBOL_GPL(ixp46x_phc_index); static int ixp4xx_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) -- cgit v1.2.3-70-g09d2 From b5497eeb37d7d4a5a61b91f64efedc90d1ad6fa3 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Mon, 6 Aug 2012 07:51:16 +0000 Subject: net: Use PTR_RET rather than if(IS_ERR(.. [1] The semantic patch that makes this change is available in scripts/coccinelle/api/ptr_ret.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Signed-off-by: David S. Miller --- drivers/net/appletalk/cops.c | 4 +--- drivers/net/appletalk/ltpc.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 545c09ed907..cff6f023c03 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -996,9 +996,7 @@ static int __init cops_module_init(void) printk(KERN_WARNING "%s: You shouldn't autoprobe with insmod\n", cardname); cops_dev = cops_probe(-1); - if (IS_ERR(cops_dev)) - return PTR_ERR(cops_dev); - return 0; + return PTR_RET(cops_dev); } static void __exit cops_module_exit(void) diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 0910dce3996..b5782cdf0bc 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1243,9 +1243,7 @@ static int __init ltpc_module_init(void) "ltpc: Autoprobing is not recommended for modules\n"); dev_ltpc = ltpc_probe(); - if (IS_ERR(dev_ltpc)) - return PTR_ERR(dev_ltpc); - return 0; + return PTR_RET(dev_ltpc); } module_init(ltpc_module_init); #endif -- cgit v1.2.3-70-g09d2