From f5e70d0fe3ea990cfb3fc8d7f76a719adcb1e0b5 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 13 Jul 2009 11:35:12 +0100 Subject: md: Factor out RAID6 algorithms into lib/ We'll want to use these in btrfs too. Signed-off-by: David Woodhouse --- drivers/md/Kconfig | 7 +- drivers/md/Makefile | 76 ------------ drivers/md/mktables.c | 132 --------------------- drivers/md/raid6algos.c | 171 --------------------------- drivers/md/raid6altivec.uc | 130 --------------------- drivers/md/raid6int.uc | 117 ------------------- drivers/md/raid6mmx.c | 142 ----------------------- drivers/md/raid6recov.c | 132 --------------------- drivers/md/raid6sse1.c | 162 -------------------------- drivers/md/raid6sse2.c | 262 ------------------------------------------ drivers/md/raid6test/Makefile | 75 ------------ drivers/md/raid6test/test.c | 124 -------------------- drivers/md/raid6x86.h | 61 ---------- drivers/md/unroll.pl | 24 ---- 14 files changed, 2 insertions(+), 1613 deletions(-) delete mode 100644 drivers/md/mktables.c delete mode 100644 drivers/md/raid6algos.c delete mode 100644 drivers/md/raid6altivec.uc delete mode 100644 drivers/md/raid6int.uc delete mode 100644 drivers/md/raid6mmx.c delete mode 100644 drivers/md/raid6recov.c delete mode 100644 drivers/md/raid6sse1.c delete mode 100644 drivers/md/raid6sse2.c delete mode 100644 drivers/md/raid6test/Makefile delete mode 100644 drivers/md/raid6test/test.c delete mode 100644 drivers/md/raid6x86.h delete mode 100644 drivers/md/unroll.pl (limited to 'drivers') diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 2158377a135..891f7c8490d 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -121,7 +121,7 @@ config MD_RAID10 config MD_RAID456 tristate "RAID-4/RAID-5/RAID-6 mode" depends on BLK_DEV_MD - select MD_RAID6_PQ + select RAID6_PQ select ASYNC_MEMCPY select ASYNC_XOR select ASYNC_PQ @@ -165,12 +165,9 @@ config MULTICORE_RAID456 If unsure, say N. -config MD_RAID6_PQ - tristate - config ASYNC_RAID6_TEST tristate "Self test for hardware accelerated raid6 recovery" - depends on MD_RAID6_PQ + depends on RAID6_PQ select ASYNC_RAID6_RECOV ---help--- This is a one-shot self test that permutes through the diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 1dc4185bd78..c9b3a7843d8 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -12,13 +12,6 @@ dm-log-userspace-y \ += dm-log-userspace-base.o dm-log-userspace-transfer.o md-mod-y += md.o bitmap.o raid456-y += raid5.o -raid6_pq-y += raid6algos.o raid6recov.o raid6tables.o \ - raid6int1.o raid6int2.o raid6int4.o \ - raid6int8.o raid6int16.o raid6int32.o \ - raid6altivec1.o raid6altivec2.o raid6altivec4.o \ - raid6altivec8.o \ - raid6mmx.o raid6sse1.o raid6sse2.o -hostprogs-y += mktables # Note: link order is important. All raid personalities # and must come before md.o, as they each initialise @@ -29,7 +22,6 @@ obj-$(CONFIG_MD_LINEAR) += linear.o obj-$(CONFIG_MD_RAID0) += raid0.o obj-$(CONFIG_MD_RAID1) += raid1.o obj-$(CONFIG_MD_RAID10) += raid10.o -obj-$(CONFIG_MD_RAID6_PQ) += raid6_pq.o obj-$(CONFIG_MD_RAID456) += raid456.o obj-$(CONFIG_MD_MULTIPATH) += multipath.o obj-$(CONFIG_MD_FAULTY) += faulty.o @@ -45,75 +37,7 @@ obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o obj-$(CONFIG_DM_ZERO) += dm-zero.o -quiet_cmd_unroll = UNROLL $@ - cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \ - < $< > $@ || ( rm -f $@ && exit 1 ) - -ifeq ($(CONFIG_ALTIVEC),y) -altivec_flags := -maltivec -mabi=altivec -endif - ifeq ($(CONFIG_DM_UEVENT),y) dm-mod-objs += dm-uevent.o endif -targets += raid6int1.c -$(obj)/raid6int1.c: UNROLL := 1 -$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -targets += raid6int2.c -$(obj)/raid6int2.c: UNROLL := 2 -$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -targets += raid6int4.c -$(obj)/raid6int4.c: UNROLL := 4 -$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -targets += raid6int8.c -$(obj)/raid6int8.c: UNROLL := 8 -$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -targets += raid6int16.c -$(obj)/raid6int16.c: UNROLL := 16 -$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -targets += raid6int32.c -$(obj)/raid6int32.c: UNROLL := 32 -$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -CFLAGS_raid6altivec1.o += $(altivec_flags) -targets += raid6altivec1.c -$(obj)/raid6altivec1.c: UNROLL := 1 -$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -CFLAGS_raid6altivec2.o += $(altivec_flags) -targets += raid6altivec2.c -$(obj)/raid6altivec2.c: UNROLL := 2 -$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -CFLAGS_raid6altivec4.o += $(altivec_flags) -targets += raid6altivec4.c -$(obj)/raid6altivec4.c: UNROLL := 4 -$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -CFLAGS_raid6altivec8.o += $(altivec_flags) -targets += raid6altivec8.c -$(obj)/raid6altivec8.c: UNROLL := 8 -$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE - $(call if_changed,unroll) - -quiet_cmd_mktable = TABLE $@ - cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 ) - -targets += raid6tables.c -$(obj)/raid6tables.c: $(obj)/mktables FORCE - $(call if_changed,mktable) diff --git a/drivers/md/mktables.c b/drivers/md/mktables.c deleted file mode 100644 index 3b1500843bb..00000000000 --- a/drivers/md/mktables.c +++ /dev/null @@ -1,132 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002-2007 H. Peter Anvin - All Rights Reserved - * - * This file is part of the Linux kernel, and is made available under - * the terms of the GNU General Public License version 2 or (at your - * option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * mktables.c - * - * Make RAID-6 tables. This is a host user space program to be run at - * compile time. - */ - -#include -#include -#include -#include -#include - -static uint8_t gfmul(uint8_t a, uint8_t b) -{ - uint8_t v = 0; - - while (b) { - if (b & 1) - v ^= a; - a = (a << 1) ^ (a & 0x80 ? 0x1d : 0); - b >>= 1; - } - - return v; -} - -static uint8_t gfpow(uint8_t a, int b) -{ - uint8_t v = 1; - - b %= 255; - if (b < 0) - b += 255; - - while (b) { - if (b & 1) - v = gfmul(v, a); - a = gfmul(a, a); - b >>= 1; - } - - return v; -} - -int main(int argc, char *argv[]) -{ - int i, j, k; - uint8_t v; - uint8_t exptbl[256], invtbl[256]; - - printf("#include \n"); - - /* Compute multiplication table */ - printf("\nconst u8 __attribute__((aligned(256)))\n" - "raid6_gfmul[256][256] =\n" - "{\n"); - for (i = 0; i < 256; i++) { - printf("\t{\n"); - for (j = 0; j < 256; j += 8) { - printf("\t\t"); - for (k = 0; k < 8; k++) - printf("0x%02x,%c", gfmul(i, j + k), - (k == 7) ? '\n' : ' '); - } - printf("\t},\n"); - } - printf("};\n"); - printf("#ifdef __KERNEL__\n"); - printf("EXPORT_SYMBOL(raid6_gfmul);\n"); - printf("#endif\n"); - - /* Compute power-of-2 table (exponent) */ - v = 1; - printf("\nconst u8 __attribute__((aligned(256)))\n" - "raid6_gfexp[256] =\n" "{\n"); - for (i = 0; i < 256; i += 8) { - printf("\t"); - for (j = 0; j < 8; j++) { - exptbl[i + j] = v; - printf("0x%02x,%c", v, (j == 7) ? '\n' : ' '); - v = gfmul(v, 2); - if (v == 1) - v = 0; /* For entry 255, not a real entry */ - } - } - printf("};\n"); - printf("#ifdef __KERNEL__\n"); - printf("EXPORT_SYMBOL(raid6_gfexp);\n"); - printf("#endif\n"); - - /* Compute inverse table x^-1 == x^254 */ - printf("\nconst u8 __attribute__((aligned(256)))\n" - "raid6_gfinv[256] =\n" "{\n"); - for (i = 0; i < 256; i += 8) { - printf("\t"); - for (j = 0; j < 8; j++) { - invtbl[i + j] = v = gfpow(i + j, 254); - printf("0x%02x,%c", v, (j == 7) ? '\n' : ' '); - } - } - printf("};\n"); - printf("#ifdef __KERNEL__\n"); - printf("EXPORT_SYMBOL(raid6_gfinv);\n"); - printf("#endif\n"); - - /* Compute inv(2^x + 1) (exponent-xor-inverse) table */ - printf("\nconst u8 __attribute__((aligned(256)))\n" - "raid6_gfexi[256] =\n" "{\n"); - for (i = 0; i < 256; i += 8) { - printf("\t"); - for (j = 0; j < 8; j++) - printf("0x%02x,%c", invtbl[exptbl[i + j] ^ 1], - (j == 7) ? '\n' : ' '); - } - printf("};\n"); - printf("#ifdef __KERNEL__\n"); - printf("EXPORT_SYMBOL(raid6_gfexi);\n"); - printf("#endif\n"); - - return 0; -} diff --git a/drivers/md/raid6algos.c b/drivers/md/raid6algos.c deleted file mode 100644 index 866215ac7f2..00000000000 --- a/drivers/md/raid6algos.c +++ /dev/null @@ -1,171 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6algos.c - * - * Algorithm list and algorithm selection for RAID-6 - */ - -#include -#ifndef __KERNEL__ -#include -#include -#else -#if !RAID6_USE_EMPTY_ZERO_PAGE -/* In .bss so it's zeroed */ -const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256))); -EXPORT_SYMBOL(raid6_empty_zero_page); -#endif -#endif - -struct raid6_calls raid6_call; -EXPORT_SYMBOL_GPL(raid6_call); - -/* Various routine sets */ -extern const struct raid6_calls raid6_intx1; -extern const struct raid6_calls raid6_intx2; -extern const struct raid6_calls raid6_intx4; -extern const struct raid6_calls raid6_intx8; -extern const struct raid6_calls raid6_intx16; -extern const struct raid6_calls raid6_intx32; -extern const struct raid6_calls raid6_mmxx1; -extern const struct raid6_calls raid6_mmxx2; -extern const struct raid6_calls raid6_sse1x1; -extern const struct raid6_calls raid6_sse1x2; -extern const struct raid6_calls raid6_sse2x1; -extern const struct raid6_calls raid6_sse2x2; -extern const struct raid6_calls raid6_sse2x4; -extern const struct raid6_calls raid6_altivec1; -extern const struct raid6_calls raid6_altivec2; -extern const struct raid6_calls raid6_altivec4; -extern const struct raid6_calls raid6_altivec8; - -const struct raid6_calls * const raid6_algos[] = { - &raid6_intx1, - &raid6_intx2, - &raid6_intx4, - &raid6_intx8, -#if defined(__ia64__) - &raid6_intx16, - &raid6_intx32, -#endif -#if defined(__i386__) && !defined(__arch_um__) - &raid6_mmxx1, - &raid6_mmxx2, - &raid6_sse1x1, - &raid6_sse1x2, - &raid6_sse2x1, - &raid6_sse2x2, -#endif -#if defined(__x86_64__) && !defined(__arch_um__) - &raid6_sse2x1, - &raid6_sse2x2, - &raid6_sse2x4, -#endif -#ifdef CONFIG_ALTIVEC - &raid6_altivec1, - &raid6_altivec2, - &raid6_altivec4, - &raid6_altivec8, -#endif - NULL -}; - -#ifdef __KERNEL__ -#define RAID6_TIME_JIFFIES_LG2 4 -#else -/* Need more time to be stable in userspace */ -#define RAID6_TIME_JIFFIES_LG2 9 -#define time_before(x, y) ((x) < (y)) -#endif - -/* Try to pick the best algorithm */ -/* This code uses the gfmul table as convenient data set to abuse */ - -int __init raid6_select_algo(void) -{ - const struct raid6_calls * const * algo; - const struct raid6_calls * best; - char *syndromes; - void *dptrs[(65536/PAGE_SIZE)+2]; - int i, disks; - unsigned long perf, bestperf; - int bestprefer; - unsigned long j0, j1; - - disks = (65536/PAGE_SIZE)+2; - for ( i = 0 ; i < disks-2 ; i++ ) { - dptrs[i] = ((char *)raid6_gfmul) + PAGE_SIZE*i; - } - - /* Normal code - use a 2-page allocation to avoid D$ conflict */ - syndromes = (void *) __get_free_pages(GFP_KERNEL, 1); - - if ( !syndromes ) { - printk("raid6: Yikes! No memory available.\n"); - return -ENOMEM; - } - - dptrs[disks-2] = syndromes; - dptrs[disks-1] = syndromes + PAGE_SIZE; - - bestperf = 0; bestprefer = 0; best = NULL; - - for ( algo = raid6_algos ; *algo ; algo++ ) { - if ( !(*algo)->valid || (*algo)->valid() ) { - perf = 0; - - preempt_disable(); - j0 = jiffies; - while ( (j1 = jiffies) == j0 ) - cpu_relax(); - while (time_before(jiffies, - j1 + (1<gen_syndrome(disks, PAGE_SIZE, dptrs); - perf++; - } - preempt_enable(); - - if ( (*algo)->prefer > bestprefer || - ((*algo)->prefer == bestprefer && - perf > bestperf) ) { - best = *algo; - bestprefer = best->prefer; - bestperf = perf; - } - printk("raid6: %-8s %5ld MB/s\n", (*algo)->name, - (perf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2)); - } - } - - if (best) { - printk("raid6: using algorithm %s (%ld MB/s)\n", - best->name, - (bestperf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2)); - raid6_call = *best; - } else - printk("raid6: Yikes! No algorithm found!\n"); - - free_pages((unsigned long)syndromes, 1); - - return best ? 0 : -EINVAL; -} - -static void raid6_exit(void) -{ - do { } while (0); -} - -subsys_initcall(raid6_select_algo); -module_exit(raid6_exit); -MODULE_LICENSE("GPL"); diff --git a/drivers/md/raid6altivec.uc b/drivers/md/raid6altivec.uc deleted file mode 100644 index 699dfeee494..00000000000 --- a/drivers/md/raid6altivec.uc +++ /dev/null @@ -1,130 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6altivec$#.c - * - * $#-way unrolled portable integer math RAID-6 instruction set - * - * This file is postprocessed using unroll.pl - * - * hpa: in process, - * you can just "steal" the vec unit with enable_kernel_altivec() (but - * bracked this with preempt_disable/enable or in a lock) - */ - -#include - -#ifdef CONFIG_ALTIVEC - -#include -#ifdef __KERNEL__ -# include -# include -#endif - -/* - * This is the C data type to use. We use a vector of - * signed char so vec_cmpgt() will generate the right - * instruction. - */ - -typedef vector signed char unative_t; - -#define NBYTES(x) ((vector signed char) {x,x,x,x, x,x,x,x, x,x,x,x, x,x,x,x}) -#define NSIZE sizeof(unative_t) - -/* - * The SHLBYTE() operation shifts each byte left by 1, *not* - * rolling over into the next byte - */ -static inline __attribute_const__ unative_t SHLBYTE(unative_t v) -{ - return vec_add(v,v); -} - -/* - * The MASK() operation returns 0xFF in any byte for which the high - * bit is 1, 0x00 for any byte for which the high bit is 0. - */ -static inline __attribute_const__ unative_t MASK(unative_t v) -{ - unative_t zv = NBYTES(0); - - /* vec_cmpgt returns a vector bool char; thus the need for the cast */ - return (unative_t)vec_cmpgt(zv, v); -} - - -/* This is noinline to make damned sure that gcc doesn't move any of the - Altivec code around the enable/disable code */ -static void noinline -raid6_altivec$#_gen_syndrome_real(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - unative_t wd$$, wq$$, wp$$, w1$$, w2$$; - unative_t x1d = NBYTES(0x1d); - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - for ( d = 0 ; d < bytes ; d += NSIZE*$# ) { - wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE]; - for ( z = z0-1 ; z >= 0 ; z-- ) { - wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE]; - wp$$ = vec_xor(wp$$, wd$$); - w2$$ = MASK(wq$$); - w1$$ = SHLBYTE(wq$$); - w2$$ = vec_and(w2$$, x1d); - w1$$ = vec_xor(w1$$, w2$$); - wq$$ = vec_xor(w1$$, wd$$); - } - *(unative_t *)&p[d+NSIZE*$$] = wp$$; - *(unative_t *)&q[d+NSIZE*$$] = wq$$; - } -} - -static void raid6_altivec$#_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - preempt_disable(); - enable_kernel_altivec(); - - raid6_altivec$#_gen_syndrome_real(disks, bytes, ptrs); - - preempt_enable(); -} - -int raid6_have_altivec(void); -#if $# == 1 -int raid6_have_altivec(void) -{ - /* This assumes either all CPUs have Altivec or none does */ -# ifdef __KERNEL__ - return cpu_has_feature(CPU_FTR_ALTIVEC); -# else - return 1; -# endif -} -#endif - -const struct raid6_calls raid6_altivec$# = { - raid6_altivec$#_gen_syndrome, - raid6_have_altivec, - "altivecx$#", - 0 -}; - -#endif /* CONFIG_ALTIVEC */ diff --git a/drivers/md/raid6int.uc b/drivers/md/raid6int.uc deleted file mode 100644 index f9bf9cba357..00000000000 --- a/drivers/md/raid6int.uc +++ /dev/null @@ -1,117 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6int$#.c - * - * $#-way unrolled portable integer math RAID-6 instruction set - * - * This file is postprocessed using unroll.pl - */ - -#include - -/* - * This is the C data type to use - */ - -/* Change this from BITS_PER_LONG if there is something better... */ -#if BITS_PER_LONG == 64 -# define NBYTES(x) ((x) * 0x0101010101010101UL) -# define NSIZE 8 -# define NSHIFT 3 -# define NSTRING "64" -typedef u64 unative_t; -#else -# define NBYTES(x) ((x) * 0x01010101U) -# define NSIZE 4 -# define NSHIFT 2 -# define NSTRING "32" -typedef u32 unative_t; -#endif - - - -/* - * IA-64 wants insane amounts of unrolling. On other architectures that - * is just a waste of space. - */ -#if ($# <= 8) || defined(__ia64__) - - -/* - * These sub-operations are separate inlines since they can sometimes be - * specially optimized using architecture-specific hacks. - */ - -/* - * The SHLBYTE() operation shifts each byte left by 1, *not* - * rolling over into the next byte - */ -static inline __attribute_const__ unative_t SHLBYTE(unative_t v) -{ - unative_t vv; - - vv = (v << 1) & NBYTES(0xfe); - return vv; -} - -/* - * The MASK() operation returns 0xFF in any byte for which the high - * bit is 1, 0x00 for any byte for which the high bit is 0. - */ -static inline __attribute_const__ unative_t MASK(unative_t v) -{ - unative_t vv; - - vv = v & NBYTES(0x80); - vv = (vv << 1) - (vv >> 7); /* Overflow on the top bit is OK */ - return vv; -} - - -static void raid6_int$#_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - unative_t wd$$, wq$$, wp$$, w1$$, w2$$; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - for ( d = 0 ; d < bytes ; d += NSIZE*$# ) { - wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE]; - for ( z = z0-1 ; z >= 0 ; z-- ) { - wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE]; - wp$$ ^= wd$$; - w2$$ = MASK(wq$$); - w1$$ = SHLBYTE(wq$$); - w2$$ &= NBYTES(0x1d); - w1$$ ^= w2$$; - wq$$ = w1$$ ^ wd$$; - } - *(unative_t *)&p[d+NSIZE*$$] = wp$$; - *(unative_t *)&q[d+NSIZE*$$] = wq$$; - } -} - -const struct raid6_calls raid6_intx$# = { - raid6_int$#_gen_syndrome, - NULL, /* always valid */ - "int" NSTRING "x$#", - 0 -}; - -#endif diff --git a/drivers/md/raid6mmx.c b/drivers/md/raid6mmx.c deleted file mode 100644 index e7f6c13132b..00000000000 --- a/drivers/md/raid6mmx.c +++ /dev/null @@ -1,142 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6mmx.c - * - * MMX implementation of RAID-6 syndrome functions - */ - -#if defined(__i386__) && !defined(__arch_um__) - -#include -#include "raid6x86.h" - -/* Shared with raid6sse1.c */ -const struct raid6_mmx_constants { - u64 x1d; -} raid6_mmx_constants = { - 0x1d1d1d1d1d1d1d1dULL, -}; - -static int raid6_have_mmx(void) -{ - /* Not really "boot_cpu" but "all_cpus" */ - return boot_cpu_has(X86_FEATURE_MMX); -} - -/* - * Plain MMX implementation - */ -static void raid6_mmx1_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d)); - asm volatile("pxor %mm5,%mm5"); /* Zero temp */ - - for ( d = 0 ; d < bytes ; d += 8 ) { - asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */ - asm volatile("movq %mm2,%mm4"); /* Q[0] */ - for ( z = z0-1 ; z >= 0 ; z-- ) { - asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d])); - asm volatile("pcmpgtb %mm4,%mm5"); - asm volatile("paddb %mm4,%mm4"); - asm volatile("pand %mm0,%mm5"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm5,%mm5"); - asm volatile("pxor %mm6,%mm2"); - asm volatile("pxor %mm6,%mm4"); - } - asm volatile("movq %%mm2,%0" : "=m" (p[d])); - asm volatile("pxor %mm2,%mm2"); - asm volatile("movq %%mm4,%0" : "=m" (q[d])); - asm volatile("pxor %mm4,%mm4"); - } - - kernel_fpu_end(); -} - -const struct raid6_calls raid6_mmxx1 = { - raid6_mmx1_gen_syndrome, - raid6_have_mmx, - "mmxx1", - 0 -}; - -/* - * Unrolled-by-2 MMX implementation - */ -static void raid6_mmx2_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d)); - asm volatile("pxor %mm5,%mm5"); /* Zero temp */ - asm volatile("pxor %mm7,%mm7"); /* Zero temp */ - - for ( d = 0 ; d < bytes ; d += 16 ) { - asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */ - asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); - asm volatile("movq %mm2,%mm4"); /* Q[0] */ - asm volatile("movq %mm3,%mm6"); /* Q[1] */ - for ( z = z0-1 ; z >= 0 ; z-- ) { - asm volatile("pcmpgtb %mm4,%mm5"); - asm volatile("pcmpgtb %mm6,%mm7"); - asm volatile("paddb %mm4,%mm4"); - asm volatile("paddb %mm6,%mm6"); - asm volatile("pand %mm0,%mm5"); - asm volatile("pand %mm0,%mm7"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm7,%mm6"); - asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d])); - asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8])); - asm volatile("pxor %mm5,%mm2"); - asm volatile("pxor %mm7,%mm3"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm7,%mm6"); - asm volatile("pxor %mm5,%mm5"); - asm volatile("pxor %mm7,%mm7"); - } - asm volatile("movq %%mm2,%0" : "=m" (p[d])); - asm volatile("movq %%mm3,%0" : "=m" (p[d+8])); - asm volatile("movq %%mm4,%0" : "=m" (q[d])); - asm volatile("movq %%mm6,%0" : "=m" (q[d+8])); - } - - kernel_fpu_end(); -} - -const struct raid6_calls raid6_mmxx2 = { - raid6_mmx2_gen_syndrome, - raid6_have_mmx, - "mmxx2", - 0 -}; - -#endif diff --git a/drivers/md/raid6recov.c b/drivers/md/raid6recov.c deleted file mode 100644 index 2609f00e0d6..00000000000 --- a/drivers/md/raid6recov.c +++ /dev/null @@ -1,132 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6recov.c - * - * RAID-6 data recovery in dual failure mode. In single failure mode, - * use the RAID-5 algorithm (or, in the case of Q failure, just reconstruct - * the syndrome.) - */ - -#include - -/* Recover two failed data blocks. */ -void raid6_2data_recov(int disks, size_t bytes, int faila, int failb, - void **ptrs) -{ - u8 *p, *q, *dp, *dq; - u8 px, qx, db; - const u8 *pbmul; /* P multiplier table for B data */ - const u8 *qmul; /* Q multiplier table (for both) */ - - p = (u8 *)ptrs[disks-2]; - q = (u8 *)ptrs[disks-1]; - - /* Compute syndrome with zero for the missing data pages - Use the dead data pages as temporary storage for - delta p and delta q */ - dp = (u8 *)ptrs[faila]; - ptrs[faila] = (void *)raid6_empty_zero_page; - ptrs[disks-2] = dp; - dq = (u8 *)ptrs[failb]; - ptrs[failb] = (void *)raid6_empty_zero_page; - ptrs[disks-1] = dq; - - raid6_call.gen_syndrome(disks, bytes, ptrs); - - /* Restore pointer table */ - ptrs[faila] = dp; - ptrs[failb] = dq; - ptrs[disks-2] = p; - ptrs[disks-1] = q; - - /* Now, pick the proper data tables */ - pbmul = raid6_gfmul[raid6_gfexi[failb-faila]]; - qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]]]; - - /* Now do it... */ - while ( bytes-- ) { - px = *p ^ *dp; - qx = qmul[*q ^ *dq]; - *dq++ = db = pbmul[px] ^ qx; /* Reconstructed B */ - *dp++ = db ^ px; /* Reconstructed A */ - p++; q++; - } -} -EXPORT_SYMBOL_GPL(raid6_2data_recov); - -/* Recover failure of one data block plus the P block */ -void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs) -{ - u8 *p, *q, *dq; - const u8 *qmul; /* Q multiplier table */ - - p = (u8 *)ptrs[disks-2]; - q = (u8 *)ptrs[disks-1]; - - /* Compute syndrome with zero for the missing data page - Use the dead data page as temporary storage for delta q */ - dq = (u8 *)ptrs[faila]; - ptrs[faila] = (void *)raid6_empty_zero_page; - ptrs[disks-1] = dq; - - raid6_call.gen_syndrome(disks, bytes, ptrs); - - /* Restore pointer table */ - ptrs[faila] = dq; - ptrs[disks-1] = q; - - /* Now, pick the proper data tables */ - qmul = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]]]; - - /* Now do it... */ - while ( bytes-- ) { - *p++ ^= *dq = qmul[*q ^ *dq]; - q++; dq++; - } -} -EXPORT_SYMBOL_GPL(raid6_datap_recov); - -#ifndef __KERNEL__ -/* Testing only */ - -/* Recover two failed blocks. */ -void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs) -{ - if ( faila > failb ) { - int tmp = faila; - faila = failb; - failb = tmp; - } - - if ( failb == disks-1 ) { - if ( faila == disks-2 ) { - /* P+Q failure. Just rebuild the syndrome. */ - raid6_call.gen_syndrome(disks, bytes, ptrs); - } else { - /* data+Q failure. Reconstruct data from P, - then rebuild syndrome. */ - /* NOT IMPLEMENTED - equivalent to RAID-5 */ - } - } else { - if ( failb == disks-2 ) { - /* data+P failure. */ - raid6_datap_recov(disks, bytes, faila, ptrs); - } else { - /* data+data failure. */ - raid6_2data_recov(disks, bytes, faila, failb, ptrs); - } - } -} - -#endif diff --git a/drivers/md/raid6sse1.c b/drivers/md/raid6sse1.c deleted file mode 100644 index b274dd5eab8..00000000000 --- a/drivers/md/raid6sse1.c +++ /dev/null @@ -1,162 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6sse1.c - * - * SSE-1/MMXEXT implementation of RAID-6 syndrome functions - * - * This is really an MMX implementation, but it requires SSE-1 or - * AMD MMXEXT for prefetch support and a few other features. The - * support for nontemporal memory accesses is enough to make this - * worthwhile as a separate implementation. - */ - -#if defined(__i386__) && !defined(__arch_um__) - -#include -#include "raid6x86.h" - -/* Defined in raid6mmx.c */ -extern const struct raid6_mmx_constants { - u64 x1d; -} raid6_mmx_constants; - -static int raid6_have_sse1_or_mmxext(void) -{ - /* Not really boot_cpu but "all_cpus" */ - return boot_cpu_has(X86_FEATURE_MMX) && - (boot_cpu_has(X86_FEATURE_XMM) || - boot_cpu_has(X86_FEATURE_MMXEXT)); -} - -/* - * Plain SSE1 implementation - */ -static void raid6_sse11_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d)); - asm volatile("pxor %mm5,%mm5"); /* Zero temp */ - - for ( d = 0 ; d < bytes ; d += 8 ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z0][d])); - asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */ - asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d])); - asm volatile("movq %mm2,%mm4"); /* Q[0] */ - asm volatile("movq %0,%%mm6" : : "m" (dptr[z0-1][d])); - for ( z = z0-2 ; z >= 0 ; z-- ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z][d])); - asm volatile("pcmpgtb %mm4,%mm5"); - asm volatile("paddb %mm4,%mm4"); - asm volatile("pand %mm0,%mm5"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm5,%mm5"); - asm volatile("pxor %mm6,%mm2"); - asm volatile("pxor %mm6,%mm4"); - asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d])); - } - asm volatile("pcmpgtb %mm4,%mm5"); - asm volatile("paddb %mm4,%mm4"); - asm volatile("pand %mm0,%mm5"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm5,%mm5"); - asm volatile("pxor %mm6,%mm2"); - asm volatile("pxor %mm6,%mm4"); - - asm volatile("movntq %%mm2,%0" : "=m" (p[d])); - asm volatile("movntq %%mm4,%0" : "=m" (q[d])); - } - - asm volatile("sfence" : : : "memory"); - kernel_fpu_end(); -} - -const struct raid6_calls raid6_sse1x1 = { - raid6_sse11_gen_syndrome, - raid6_have_sse1_or_mmxext, - "sse1x1", - 1 /* Has cache hints */ -}; - -/* - * Unrolled-by-2 SSE1 implementation - */ -static void raid6_sse12_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d)); - asm volatile("pxor %mm5,%mm5"); /* Zero temp */ - asm volatile("pxor %mm7,%mm7"); /* Zero temp */ - - /* We uniformly assume a single prefetch covers at least 16 bytes */ - for ( d = 0 ; d < bytes ; d += 16 ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z0][d])); - asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */ - asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); /* P[1] */ - asm volatile("movq %mm2,%mm4"); /* Q[0] */ - asm volatile("movq %mm3,%mm6"); /* Q[1] */ - for ( z = z0-1 ; z >= 0 ; z-- ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z][d])); - asm volatile("pcmpgtb %mm4,%mm5"); - asm volatile("pcmpgtb %mm6,%mm7"); - asm volatile("paddb %mm4,%mm4"); - asm volatile("paddb %mm6,%mm6"); - asm volatile("pand %mm0,%mm5"); - asm volatile("pand %mm0,%mm7"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm7,%mm6"); - asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d])); - asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8])); - asm volatile("pxor %mm5,%mm2"); - asm volatile("pxor %mm7,%mm3"); - asm volatile("pxor %mm5,%mm4"); - asm volatile("pxor %mm7,%mm6"); - asm volatile("pxor %mm5,%mm5"); - asm volatile("pxor %mm7,%mm7"); - } - asm volatile("movntq %%mm2,%0" : "=m" (p[d])); - asm volatile("movntq %%mm3,%0" : "=m" (p[d+8])); - asm volatile("movntq %%mm4,%0" : "=m" (q[d])); - asm volatile("movntq %%mm6,%0" : "=m" (q[d+8])); - } - - asm volatile("sfence" : :: "memory"); - kernel_fpu_end(); -} - -const struct raid6_calls raid6_sse1x2 = { - raid6_sse12_gen_syndrome, - raid6_have_sse1_or_mmxext, - "sse1x2", - 1 /* Has cache hints */ -}; - -#endif diff --git a/drivers/md/raid6sse2.c b/drivers/md/raid6sse2.c deleted file mode 100644 index 6ed6c6c0389..00000000000 --- a/drivers/md/raid6sse2.c +++ /dev/null @@ -1,262 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6sse2.c - * - * SSE-2 implementation of RAID-6 syndrome functions - * - */ - -#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__) - -#include -#include "raid6x86.h" - -static const struct raid6_sse_constants { - u64 x1d[2]; -} raid6_sse_constants __attribute__((aligned(16))) = { - { 0x1d1d1d1d1d1d1d1dULL, 0x1d1d1d1d1d1d1d1dULL }, -}; - -static int raid6_have_sse2(void) -{ - /* Not really boot_cpu but "all_cpus" */ - return boot_cpu_has(X86_FEATURE_MMX) && - boot_cpu_has(X86_FEATURE_FXSR) && - boot_cpu_has(X86_FEATURE_XMM) && - boot_cpu_has(X86_FEATURE_XMM2); -} - -/* - * Plain SSE2 implementation - */ -static void raid6_sse21_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0])); - asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */ - - for ( d = 0 ; d < bytes ; d += 16 ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z0][d])); - asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */ - asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d])); - asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */ - asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z0-1][d])); - for ( z = z0-2 ; z >= 0 ; z-- ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z][d])); - asm volatile("pcmpgtb %xmm4,%xmm5"); - asm volatile("paddb %xmm4,%xmm4"); - asm volatile("pand %xmm0,%xmm5"); - asm volatile("pxor %xmm5,%xmm4"); - asm volatile("pxor %xmm5,%xmm5"); - asm volatile("pxor %xmm6,%xmm2"); - asm volatile("pxor %xmm6,%xmm4"); - asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z][d])); - } - asm volatile("pcmpgtb %xmm4,%xmm5"); - asm volatile("paddb %xmm4,%xmm4"); - asm volatile("pand %xmm0,%xmm5"); - asm volatile("pxor %xmm5,%xmm4"); - asm volatile("pxor %xmm5,%xmm5"); - asm volatile("pxor %xmm6,%xmm2"); - asm volatile("pxor %xmm6,%xmm4"); - - asm volatile("movntdq %%xmm2,%0" : "=m" (p[d])); - asm volatile("pxor %xmm2,%xmm2"); - asm volatile("movntdq %%xmm4,%0" : "=m" (q[d])); - asm volatile("pxor %xmm4,%xmm4"); - } - - asm volatile("sfence" : : : "memory"); - kernel_fpu_end(); -} - -const struct raid6_calls raid6_sse2x1 = { - raid6_sse21_gen_syndrome, - raid6_have_sse2, - "sse2x1", - 1 /* Has cache hints */ -}; - -/* - * Unrolled-by-2 SSE2 implementation - */ -static void raid6_sse22_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0])); - asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */ - asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */ - - /* We uniformly assume a single prefetch covers at least 32 bytes */ - for ( d = 0 ; d < bytes ; d += 32 ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z0][d])); - asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */ - asm volatile("movdqa %0,%%xmm3" : : "m" (dptr[z0][d+16])); /* P[1] */ - asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */ - asm volatile("movdqa %xmm3,%xmm6"); /* Q[1] */ - for ( z = z0-1 ; z >= 0 ; z-- ) { - asm volatile("prefetchnta %0" : : "m" (dptr[z][d])); - asm volatile("pcmpgtb %xmm4,%xmm5"); - asm volatile("pcmpgtb %xmm6,%xmm7"); - asm volatile("paddb %xmm4,%xmm4"); - asm volatile("paddb %xmm6,%xmm6"); - asm volatile("pand %xmm0,%xmm5"); - asm volatile("pand %xmm0,%xmm7"); - asm volatile("pxor %xmm5,%xmm4"); - asm volatile("pxor %xmm7,%xmm6"); - asm volatile("movdqa %0,%%xmm5" : : "m" (dptr[z][d])); - asm volatile("movdqa %0,%%xmm7" : : "m" (dptr[z][d+16])); - asm volatile("pxor %xmm5,%xmm2"); - asm volatile("pxor %xmm7,%xmm3"); - asm volatile("pxor %xmm5,%xmm4"); - asm volatile("pxor %xmm7,%xmm6"); - asm volatile("pxor %xmm5,%xmm5"); - asm volatile("pxor %xmm7,%xmm7"); - } - asm volatile("movntdq %%xmm2,%0" : "=m" (p[d])); - asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16])); - asm volatile("movntdq %%xmm4,%0" : "=m" (q[d])); - asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16])); - } - - asm volatile("sfence" : : : "memory"); - kernel_fpu_end(); -} - -const struct raid6_calls raid6_sse2x2 = { - raid6_sse22_gen_syndrome, - raid6_have_sse2, - "sse2x2", - 1 /* Has cache hints */ -}; - -#endif - -#if defined(__x86_64__) && !defined(__arch_um__) - -/* - * Unrolled-by-4 SSE2 implementation - */ -static void raid6_sse24_gen_syndrome(int disks, size_t bytes, void **ptrs) -{ - u8 **dptr = (u8 **)ptrs; - u8 *p, *q; - int d, z, z0; - - z0 = disks - 3; /* Highest data disk */ - p = dptr[z0+1]; /* XOR parity */ - q = dptr[z0+2]; /* RS syndrome */ - - kernel_fpu_begin(); - - asm volatile("movdqa %0,%%xmm0" :: "m" (raid6_sse_constants.x1d[0])); - asm volatile("pxor %xmm2,%xmm2"); /* P[0] */ - asm volatile("pxor %xmm3,%xmm3"); /* P[1] */ - asm volatile("pxor %xmm4,%xmm4"); /* Q[0] */ - asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */ - asm volatile("pxor %xmm6,%xmm6"); /* Q[1] */ - asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */ - asm volatile("pxor %xmm10,%xmm10"); /* P[2] */ - asm volatile("pxor %xmm11,%xmm11"); /* P[3] */ - asm volatile("pxor %xmm12,%xmm12"); /* Q[2] */ - asm volatile("pxor %xmm13,%xmm13"); /* Zero temp */ - asm volatile("pxor %xmm14,%xmm14"); /* Q[3] */ - asm volatile("pxor %xmm15,%xmm15"); /* Zero temp */ - - for ( d = 0 ; d < bytes ; d += 64 ) { - for ( z = z0 ; z >= 0 ; z-- ) { - /* The second prefetch seems to improve performance... */ - asm volatile("prefetchnta %0" :: "m" (dptr[z][d])); - asm volatile("prefetchnta %0" :: "m" (dptr[z][d+32])); - asm volatile("pcmpgtb %xmm4,%xmm5"); - asm volatile("pcmpgtb %xmm6,%xmm7"); - asm volatile("pcmpgtb %xmm12,%xmm13"); - asm volatile("pcmpgtb %xmm14,%xmm15"); - asm volatile("paddb %xmm4,%xmm4"); - asm volatile("paddb %xmm6,%xmm6"); - asm volatile("paddb %xmm12,%xmm12"); - asm volatile("paddb %xmm14,%xmm14"); - asm volatile("pand %xmm0,%xmm5"); - asm volatile("pand %xmm0,%xmm7"); - asm volatile("pand %xmm0,%xmm13"); - asm volatile("pand %xmm0,%xmm15"); - asm volatile("pxor %xmm5,%xmm4"); - asm volatile("pxor %xmm7,%xmm6"); - asm volatile("pxor %xmm13,%xmm12"); - asm volatile("pxor %xmm15,%xmm14"); - asm volatile("movdqa %0,%%xmm5" :: "m" (dptr[z][d])); - asm volatile("movdqa %0,%%xmm7" :: "m" (dptr[z][d+16])); - asm volatile("movdqa %0,%%xmm13" :: "m" (dptr[z][d+32])); - asm volatile("movdqa %0,%%xmm15" :: "m" (dptr[z][d+48])); - asm volatile("pxor %xmm5,%xmm2"); - asm volatile("pxor %xmm7,%xmm3"); - asm volatile("pxor %xmm13,%xmm10"); - asm volatile("pxor %xmm15,%xmm11"); - asm volatile("pxor %xmm5,%xmm4"); - asm volatile("pxor %xmm7,%xmm6"); - asm volatile("pxor %xmm13,%xmm12"); - asm volatile("pxor %xmm15,%xmm14"); - asm volatile("pxor %xmm5,%xmm5"); - asm volatile("pxor %xmm7,%xmm7"); - asm volatile("pxor %xmm13,%xmm13"); - asm volatile("pxor %xmm15,%xmm15"); - } - asm volatile("movntdq %%xmm2,%0" : "=m" (p[d])); - asm volatile("pxor %xmm2,%xmm2"); - asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16])); - asm volatile("pxor %xmm3,%xmm3"); - asm volatile("movntdq %%xmm10,%0" : "=m" (p[d+32])); - asm volatile("pxor %xmm10,%xmm10"); - asm volatile("movntdq %%xmm11,%0" : "=m" (p[d+48])); - asm volatile("pxor %xmm11,%xmm11"); - asm volatile("movntdq %%xmm4,%0" : "=m" (q[d])); - asm volatile("pxor %xmm4,%xmm4"); - asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16])); - asm volatile("pxor %xmm6,%xmm6"); - asm volatile("movntdq %%xmm12,%0" : "=m" (q[d+32])); - asm volatile("pxor %xmm12,%xmm12"); - asm volatile("movntdq %%xmm14,%0" : "=m" (q[d+48])); - asm volatile("pxor %xmm14,%xmm14"); - } - - asm volatile("sfence" : : : "memory"); - kernel_fpu_end(); -} - -const struct raid6_calls raid6_sse2x4 = { - raid6_sse24_gen_syndrome, - raid6_have_sse2, - "sse2x4", - 1 /* Has cache hints */ -}; - -#endif diff --git a/drivers/md/raid6test/Makefile b/drivers/md/raid6test/Makefile deleted file mode 100644 index 58ffdf4f516..00000000000 --- a/drivers/md/raid6test/Makefile +++ /dev/null @@ -1,75 +0,0 @@ -# -# This is a simple Makefile to test some of the RAID-6 code -# from userspace. -# - -CC = gcc -OPTFLAGS = -O2 # Adjust as desired -CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS) -LD = ld -PERL = perl -AR = ar -RANLIB = ranlib - -.c.o: - $(CC) $(CFLAGS) -c -o $@ $< - -%.c: ../%.c - cp -f $< $@ - -%.uc: ../%.uc - cp -f $< $@ - -all: raid6.a raid6test - -raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \ - raid6int32.o \ - raid6mmx.o raid6sse1.o raid6sse2.o \ - raid6altivec1.o raid6altivec2.o raid6altivec4.o raid6altivec8.o \ - raid6recov.o raid6algos.o \ - raid6tables.o - rm -f $@ - $(AR) cq $@ $^ - $(RANLIB) $@ - -raid6test: test.c raid6.a - $(CC) $(CFLAGS) -o raid6test $^ - -raid6altivec1.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 1 < raid6altivec.uc > $@ - -raid6altivec2.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 2 < raid6altivec.uc > $@ - -raid6altivec4.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 4 < raid6altivec.uc > $@ - -raid6altivec8.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 8 < raid6altivec.uc > $@ - -raid6int1.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 1 < raid6int.uc > $@ - -raid6int2.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 2 < raid6int.uc > $@ - -raid6int4.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 4 < raid6int.uc > $@ - -raid6int8.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 8 < raid6int.uc > $@ - -raid6int16.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 16 < raid6int.uc > $@ - -raid6int32.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 32 < raid6int.uc > $@ - -raid6tables.c: mktables - ./mktables > raid6tables.c - -clean: - rm -f *.o *.a mktables mktables.c raid6int.uc raid6*.c raid6test - -spotless: clean - rm -f *~ diff --git a/drivers/md/raid6test/test.c b/drivers/md/raid6test/test.c deleted file mode 100644 index 7a930318b17..00000000000 --- a/drivers/md/raid6test/test.c +++ /dev/null @@ -1,124 +0,0 @@ -/* -*- linux-c -*- ------------------------------------------------------- * - * - * Copyright 2002-2007 H. Peter Anvin - All Rights Reserved - * - * This file is part of the Linux kernel, and is made available under - * the terms of the GNU General Public License version 2 or (at your - * option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6test.c - * - * Test RAID-6 recovery with various algorithms - */ - -#include -#include -#include -#include - -#define NDISKS 16 /* Including P and Q */ - -const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256))); -struct raid6_calls raid6_call; - -char *dataptrs[NDISKS]; -char data[NDISKS][PAGE_SIZE]; -char recovi[PAGE_SIZE], recovj[PAGE_SIZE]; - -static void makedata(void) -{ - int i, j; - - for (i = 0; i < NDISKS; i++) { - for (j = 0; j < PAGE_SIZE; j++) - data[i][j] = rand(); - - dataptrs[i] = data[i]; - } -} - -static char disk_type(int d) -{ - switch (d) { - case NDISKS-2: - return 'P'; - case NDISKS-1: - return 'Q'; - default: - return 'D'; - } -} - -static int test_disks(int i, int j) -{ - int erra, errb; - - memset(recovi, 0xf0, PAGE_SIZE); - memset(recovj, 0xba, PAGE_SIZE); - - dataptrs[i] = recovi; - dataptrs[j] = recovj; - - raid6_dual_recov(NDISKS, PAGE_SIZE, i, j, (void **)&dataptrs); - - erra = memcmp(data[i], recovi, PAGE_SIZE); - errb = memcmp(data[j], recovj, PAGE_SIZE); - - if (i < NDISKS-2 && j == NDISKS-1) { - /* We don't implement the DQ failure scenario, since it's - equivalent to a RAID-5 failure (XOR, then recompute Q) */ - erra = errb = 0; - } else { - printf("algo=%-8s faila=%3d(%c) failb=%3d(%c) %s\n", - raid6_call.name, - i, disk_type(i), - j, disk_type(j), - (!erra && !errb) ? "OK" : - !erra ? "ERRB" : - !errb ? "ERRA" : "ERRAB"); - } - - dataptrs[i] = data[i]; - dataptrs[j] = data[j]; - - return erra || errb; -} - -int main(int argc, char *argv[]) -{ - const struct raid6_calls *const *algo; - int i, j; - int err = 0; - - makedata(); - - for (algo = raid6_algos; *algo; algo++) { - if (!(*algo)->valid || (*algo)->valid()) { - raid6_call = **algo; - - /* Nuke syndromes */ - memset(data[NDISKS-2], 0xee, 2*PAGE_SIZE); - - /* Generate assumed good syndrome */ - raid6_call.gen_syndrome(NDISKS, PAGE_SIZE, - (void **)&dataptrs); - - for (i = 0; i < NDISKS-1; i++) - for (j = i+1; j < NDISKS; j++) - err += test_disks(i, j); - } - printf("\n"); - } - - printf("\n"); - /* Pick the best algorithm test */ - raid6_select_algo(); - - if (err) - printf("\n*** ERRORS FOUND ***\n"); - - return err; -} diff --git a/drivers/md/raid6x86.h b/drivers/md/raid6x86.h deleted file mode 100644 index 4c22c156855..00000000000 --- a/drivers/md/raid6x86.h +++ /dev/null @@ -1,61 +0,0 @@ -/* ----------------------------------------------------------------------- * - * - * Copyright 2002-2004 H. Peter Anvin - All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, Inc., 53 Temple Place Ste 330, - * Boston MA 02111-1307, USA; either version 2 of the License, or - * (at your option) any later version; incorporated herein by reference. - * - * ----------------------------------------------------------------------- */ - -/* - * raid6x86.h - * - * Definitions common to x86 and x86-64 RAID-6 code only - */ - -#ifndef LINUX_RAID_RAID6X86_H -#define LINUX_RAID_RAID6X86_H - -#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__) - -#ifdef __KERNEL__ /* Real code */ - -#include - -#else /* Dummy code for user space testing */ - -static inline void kernel_fpu_begin(void) -{ -} - -static inline void kernel_fpu_end(void) -{ -} - -#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */ -#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions - * (fast save and restore) */ -#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */ -#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */ -#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */ - -/* Should work well enough on modern CPUs for testing */ -static inline int boot_cpu_has(int flag) -{ - u32 eax = (flag >> 5) ? 0x80000001 : 1; - u32 edx; - - asm volatile("cpuid" - : "+a" (eax), "=d" (edx) - : : "ecx", "ebx"); - - return (edx >> (flag & 31)) & 1; -} - -#endif /* ndef __KERNEL__ */ - -#endif -#endif diff --git a/drivers/md/unroll.pl b/drivers/md/unroll.pl deleted file mode 100644 index 3acc710a20e..00000000000 --- a/drivers/md/unroll.pl +++ /dev/null @@ -1,24 +0,0 @@ -#!/usr/bin/perl -# -# Take a piece of C code and for each line which contains the sequence $$ -# repeat n times with $ replaced by 0...n-1; the sequence $# is replaced -# by the unrolling factor, and $* with a single $ -# - -($n) = @ARGV; -$n += 0; - -while ( defined($line = ) ) { - if ( $line =~ /\$\$/ ) { - $rep = $n; - } else { - $rep = 1; - } - for ( $i = 0 ; $i < $rep ; $i++ ) { - $tmp = $line; - $tmp =~ s/\$\$/$i/g; - $tmp =~ s/\$\#/$n/g; - $tmp =~ s/\$\*/\$/g; - print $tmp; - } -} -- cgit v1.2.3-70-g09d2