From f9a6aa4303bd15bbdb24d9fe374e4e6850298460 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 6 Aug 2012 18:32:08 +0200 Subject: clk: convert ARM RealView to common clk This converts the ARM RealView machine over to using the common clock. The approach is similar to the one used for the Integrator, and we're reusing the ICST wrapper code. We have to put the clock intialization in the timer init function for the clocks to be available when initializing the timer, keeping them in early_init() is too early for the common clk. Since we now have to go down and compile drivers/clk/versatile a CONFIG_COMMON_CLK_VERSATILE symbol has been added so the proper code gets compiled into the kernel for either machine. A leftover CLK_VERSATILE in the Integrator Kconfig was fixed up to use the new symbol as well. Tested on ARM RealView PB1176. Cc: Pawel Moll Signed-off-by: Linus Walleij Signed-off-by: Mike Turquette --- drivers/clk/Kconfig | 7 +++ drivers/clk/Makefile | 2 +- drivers/clk/versatile/Makefile | 1 + drivers/clk/versatile/clk-realview.c | 114 +++++++++++++++++++++++++++++++++++ 4 files changed, 123 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/versatile/clk-realview.c (limited to 'drivers') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 7f0b5ca7851..89b726d1afe 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -40,4 +40,11 @@ config COMMON_CLK_WM831X Supports the clocking subsystem of the WM831x/2x series of PMICs from Wolfson Microlectronics. +config COMMON_CLK_VERSATILE + tristate "Clock driver for ARM Reference designs" + depends on ARCH_INTEGRATOR || ARCH_REALVIEW + ---help--- + Supports clocking on ARM Reference designs Integrator/AP, + Integrator/CP, RealView PB1176, EB, PB11MP and PBX. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index d4c7253eb30..e30376c4ff5 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o -obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/ +obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o # Chip specific diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index 50cf6a2ee69..c0a0f647879 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -1,3 +1,4 @@ # Makefile for Versatile-specific clocks obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o +obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c new file mode 100644 index 00000000000..e21a99cef37 --- /dev/null +++ b/drivers/clk/versatile/clk-realview.c @@ -0,0 +1,114 @@ +#include +#include +#include +#include +#include + +#include +#include + +#include "clk-icst.h" + +/* + * Implementation of the ARM RealView clock trees. + */ + +static void __iomem *sys_lock; +static void __iomem *sys_vcoreg; + +/** + * realview_oscvco_get() - get ICST OSC settings for the RealView + */ +static struct icst_vco realview_oscvco_get(void) +{ + u32 val; + struct icst_vco vco; + + val = readl(sys_vcoreg); + vco.v = val & 0x1ff; + vco.r = (val >> 9) & 0x7f; + vco.s = (val >> 16) & 03; + return vco; +} + +static void realview_oscvco_set(struct icst_vco vco) +{ + u32 val; + + val = readl(sys_vcoreg) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + /* This magic unlocks the CM VCO so it can be controlled */ + writel(0xa05f, sys_lock); + writel(val, sys_vcoreg); + /* This locks the CM again */ + writel(0, sys_lock); +} + +static const struct icst_params realview_oscvco_params = { + .ref = 24000000, + .vco_max = ICST307_VCO_MAX, + .vco_min = ICST307_VCO_MIN, + .vd_min = 4 + 8, + .vd_max = 511 + 8, + .rd_min = 1 + 2, + .rd_max = 127 + 2, + .s2div = icst307_s2div, + .idx2s = icst307_idx2s, +}; + +static const struct clk_icst_desc __initdata realview_icst_desc = { + .params = &realview_oscvco_params, + .getvco = realview_oscvco_get, + .setvco = realview_oscvco_set, +}; + +/* + * realview_clk_init() - set up the RealView clock tree + */ +void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) +{ + struct clk *clk; + + sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET; + if (is_pb1176) + sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET; + else + sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET; + + + /* APB clock dummy */ + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + + /* 24 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT, + 24000000); + clk_register_clkdev(clk, NULL, "dev:uart0"); + clk_register_clkdev(clk, NULL, "dev:uart1"); + clk_register_clkdev(clk, NULL, "dev:uart2"); + clk_register_clkdev(clk, NULL, "fpga:kmi0"); + clk_register_clkdev(clk, NULL, "fpga:kmi1"); + clk_register_clkdev(clk, NULL, "fpga:mmc0"); + clk_register_clkdev(clk, NULL, "dev:ssp0"); + if (is_pb1176) { + /* + * UART3 is on the dev chip in PB1176 + * UART4 only exists in PB1176 + */ + clk_register_clkdev(clk, NULL, "dev:uart3"); + clk_register_clkdev(clk, NULL, "dev:uart4"); + } else + clk_register_clkdev(clk, NULL, "fpga:uart3"); + + + /* 1 MHz clock */ + clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT, + 1000000); + clk_register_clkdev(clk, NULL, "sp804"); + + /* ICST VCO clock */ + clk = icst_clk_register(NULL, &realview_icst_desc); + clk_register_clkdev(clk, NULL, "dev:clcd"); + clk_register_clkdev(clk, NULL, "issp:clcd"); +} -- cgit v1.2.3-70-g09d2