From 6964d91db2becfe80658f50584d264708ca7f49e Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Mon, 17 Feb 2014 14:52:11 +0530 Subject: cpufreq: remove sysfs link when a cpu != policy->cpu, is removed Commit 42f921a (cpufreq: remove sysfs files for CPUs which failed to come back after resume) tried to do this but missed this piece of code to fix. Currently we are getting this on suspend/resume: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 877 at fs/sysfs/dir.c:52 sysfs_warn_dup+0x68/0x84() sysfs: cannot create duplicate filename '/devices/system/cpu/cpu1/cpufreq' Modules linked in: brcmfmac brcmutil CPU: 0 PID: 877 Comm: test-rtc-resume Not tainted 3.14.0-rc2-00259-g9398a10cd964 #12 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x80/0xcc) [] (dump_stack) from [] (warn_slowpath_common+0x64/0x88) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (sysfs_warn_dup+0x68/0x84) [] (sysfs_warn_dup) from [] (sysfs_do_create_link_sd+0xb0/0xb8) [] (sysfs_do_create_link_sd) from [] (__cpufreq_add_dev.isra.27+0x2a8/0x814) [] (__cpufreq_add_dev.isra.27) from [] (cpufreq_cpu_callback+0x70/0x8c) [] (cpufreq_cpu_callback) from [] (notifier_call_chain+0x44/0x84) [] (notifier_call_chain) from [] (__cpu_notify+0x28/0x44) [] (__cpu_notify) from [] (_cpu_up+0xf0/0x140) [] (_cpu_up) from [] (enable_nonboot_cpus+0x68/0xb0) [] (enable_nonboot_cpus) from [] (suspend_devices_and_enter+0x198/0x2dc) [] (suspend_devices_and_enter) from [] (pm_suspend+0x174/0x1e8) [] (pm_suspend) from [] (state_store+0x6c/0xbc) [] (state_store) from [] (kobj_attr_store+0x14/0x20) [] (kobj_attr_store) from [] (sysfs_kf_write+0x44/0x48) [] (sysfs_kf_write) from [] (kernfs_fop_write+0xb4/0x14c) [] (kernfs_fop_write) from [] (vfs_write+0xa8/0x180) [] (vfs_write) from [] (SyS_write+0x3c/0x70) [] (SyS_write) from [] (ret_fast_syscall+0x0/0x30) ---[ end trace 76969904b614c18f ]--- Fix this by removing sysfs link for cpufreq directory when cpu removed isn't policy->cpu. Revamps: 42f921a (cpufreq: remove sysfs files for CPUs which failed to come back after resume) Reported-and-tested-by: Stephen Warren Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 08ca8c9f41c..cb003a6b72c 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1323,8 +1323,7 @@ static int __cpufreq_remove_dev_prepare(struct device *dev, up_read(&policy->rwsem); if (cpu != policy->cpu) { - if (!frozen) - sysfs_remove_link(&dev->kobj, "cpufreq"); + sysfs_remove_link(&dev->kobj, "cpufreq"); } else if (cpus > 1) { new_cpu = cpufreq_nominate_new_policy_cpu(policy, cpu); if (new_cpu >= 0) { -- cgit v1.2.3-70-g09d2 From c3274763bfc3bf1ececa269ed6e6c4d7ec1c3e5e Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 17 Feb 2014 16:18:21 +0530 Subject: cpufreq: powernow-k8: Initialize per-cpu data-structures properly The powernow-k8 driver maintains a per-cpu data-structure called powernow_data that is used to perform the frequency transitions. It initializes this data structure only for the policy->cpu. So, accesses to this data structure by other CPUs results in various problems because they would have been uninitialized. Specifically, if a cpu (!= policy->cpu) invokes the drivers' ->get() function, it returns 0 as the KHz value, since its per-cpu memory doesn't point to anything valid. This causes problems during suspend/resume since cpufreq_update_policy() tries to enforce this (0 KHz) as the current frequency of the CPU, and this madness gets propagated to adjust_jiffies() as well. Eventually, lots of things start breaking down, including the r8169 ethernet card, in one particularly interesting case reported by Pierre Ossman. Fix this by initializing the per-cpu data-structures of all the CPUs in the policy appropriately. References: https://bugzilla.kernel.org/show_bug.cgi?id=70311 Reported-by: Pierre Ossman Signed-off-by: Srivatsa S. Bhat Cc: All applicable Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/powernow-k8.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index e10b646634d..6684e034279 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1076,7 +1076,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol) { struct powernow_k8_data *data; struct init_on_cpu init_on_cpu; - int rc; + int rc, cpu; smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1); if (rc) @@ -1140,7 +1140,9 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol) pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - per_cpu(powernow_data, pol->cpu) = data; + /* Point all the CPUs in this policy to the same data */ + for_each_cpu(cpu, pol->cpus) + per_cpu(powernow_data, cpu) = data; return 0; @@ -1155,6 +1157,7 @@ err_out: static int powernowk8_cpu_exit(struct cpufreq_policy *pol) { struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); + int cpu; if (!data) return -EINVAL; @@ -1165,7 +1168,8 @@ static int powernowk8_cpu_exit(struct cpufreq_policy *pol) kfree(data->powernow_table); kfree(data); - per_cpu(powernow_data, pol->cpu) = NULL; + for_each_cpu(cpu, pol->cpus) + per_cpu(powernow_data, cpu) = NULL; return 0; } -- cgit v1.2.3-70-g09d2 From 4042e7570cff740460b75c6fc604c629621d3dd2 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Wed, 12 Feb 2014 10:01:06 -0800 Subject: intel_pstate: Use LFM bus ratio as min ratio/P state LFM (max efficiency ratio) is the max frequency at minimum voltage supported by the processor. Using LFM as the minimum P state increases performmance without affecting power. By not using P states below LFM we avoid using P states that are less power efficient. Signed-off-by: Dirk Brandewie Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index c788abf1c45..deb04cc64ba 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -357,7 +357,7 @@ static int byt_get_min_pstate(void) { u64 value; rdmsrl(BYT_RATIOS, value); - return value & 0xFF; + return (value >> 8) & 0xFF; } static int byt_get_max_pstate(void) -- cgit v1.2.3-70-g09d2 From 61d8d2abc15e9232c3914c55502b73e559366583 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Wed, 12 Feb 2014 10:01:07 -0800 Subject: intel_pstate: Add support for Baytrail turbo P states A documentation update exposed the existance of the turbo ratio register. Update baytrail support to use the turbo range. Signed-off-by: Dirk Brandewie Cc: 3.13+ # 3.13+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index deb04cc64ba..e9081610592 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -34,8 +34,10 @@ #define SAMPLE_COUNT 3 -#define BYT_RATIOS 0x66a -#define BYT_VIDS 0x66b +#define BYT_RATIOS 0x66a +#define BYT_VIDS 0x66b +#define BYT_TURBO_RATIOS 0x66c + #define FRAC_BITS 8 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS) @@ -367,6 +369,13 @@ static int byt_get_max_pstate(void) return (value >> 16) & 0xFF; } +static int byt_get_turbo_pstate(void) +{ + u64 value; + rdmsrl(BYT_TURBO_RATIOS, value); + return value & 0x3F; +} + static void byt_set_pstate(struct cpudata *cpudata, int pstate) { u64 val; @@ -469,7 +478,7 @@ static struct cpu_defaults byt_params = { .funcs = { .get_max = byt_get_max_pstate, .get_min = byt_get_min_pstate, - .get_turbo = byt_get_max_pstate, + .get_turbo = byt_get_turbo_pstate, .set = byt_set_pstate, .get_vid = byt_get_vid, }, -- cgit v1.2.3-70-g09d2