From 6d7120a713300283a8b73e7d86cd1bab8b9d1971 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:42:50 +0900 Subject: video: pvr2fb: Fix up spurious section mismatch warnings. pvr2fb special cases its init/exit routines which causes spurious section mismatches. Set the board_driver array __refdata to silence them. Signed-off-by: Paul Mundt --- drivers/video/pvr2fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index f9975100d56..3a3fdc62c75 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1061,7 +1061,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_driver[] = { +} board_driver[] __refdata = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif -- cgit v1.2.3-70-g09d2 From 64dea57588f49736c2a7778292f3967c7984ab94 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 19 Jan 2012 01:00:40 -0800 Subject: sh: clkfwk: bugfix: use clk_reparent() for div6 clocks Various problems will happen if clk parent was set up directly. it should use clk_reparent() Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/cpg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 45fee368b09..92d314a73f6 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk) return -EINVAL; } - clk->parent = clk->parent_table[val]; + clk_reparent(clk, clk->parent_table[val]); if (!clk->parent) { pr_err("sh_clk_init_parent: unable to set parent"); return -EINVAL; -- cgit v1.2.3-70-g09d2 From 8791d63af0cf113725ae4cb8cba9492814c59a93 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 Jan 2012 12:04:11 -0300 Subject: [media] imon: don't wedge hardware after early callbacks This patch is just a minor update to one titled "imon: Input from ffdc device type ignored" from Corinna Vinschen. An earlier patch to prevent an oops when we got early callbacks also has the nasty side-effect of wedging imon hardware, as we don't acknowledge the urb. Rework the check slightly here to bypass processing the packet, as the driver isn't yet fully initialized, but still acknowlege the urb and submit a new rx_urb. Do this for both interfaces -- irrelevant for ffdc hardware, but relevant for newer hardware, though newer hardware doesn't spew the constant stream of data as soon as the hardware is initialized like the older ffdc devices, so they'd be less likely to trigger this anyway... Tested with both an ffdc device and an 0042 device. Reported-by: Corinna Vinschen Signed-off-by: Jarod Wilson CC: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6ed96465137..3f175ebe276 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -47,7 +47,7 @@ #define MOD_AUTHOR "Jarod Wilson " #define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" #define MOD_NAME "imon" -#define MOD_VERSION "0.9.3" +#define MOD_VERSION "0.9.4" #define DISPLAY_MINOR_BASE 144 #define DEVICE_NAME "lcd%d" @@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf0) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf0) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); } @@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf1) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf1) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); } @@ -2242,7 +2260,7 @@ find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(rx_urb); rx_urb_alloc_failed: - dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret); return NULL; } -- cgit v1.2.3-70-g09d2 From 63ae37ea5186a6890a8968611180dc61118f719d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 16 Nov 2011 10:54:02 -0300 Subject: [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes Commit 3e0ec41c5c5ee14e27f65e28d4a616de34f59a97 ("V4L: dynamically allocate video_device nodes in subdevices") makes the embedding video_device directly. Fix accesses to the devnode accordingly. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/omap3isp/ispccdc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index 3663834ca94..ec62d11d678 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -1407,7 +1407,7 @@ static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event) static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc) { struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); - struct video_device *vdev = &ccdc->subdev.devnode; + struct video_device *vdev = ccdc->subdev.devnode; struct v4l2_event event; memset(&event, 0, sizeof(event)); -- cgit v1.2.3-70-g09d2 From eae66b50c760233fad526edf4a0d327be17a055d Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 8 Feb 2012 12:53:49 -0800 Subject: drm/i915: gen7: implement rczunit workaround This is yet another workaround related to clock gating which we need on Ivy Bridge. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov Signed-off-by: Eugeni Dodonov Signed-off-by: Kenneth Graunke Signed-off-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c3afb783cb9..80fd6b5d428 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3618,6 +3618,7 @@ #define GT_FIFO_NUM_RESERVED_ENTRIES 20 #define GEN6_UCGCTL2 0x9404 +# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index b3b51c43dad..643c525b288 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8461,6 +8461,11 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + /* According to the spec, bit 13 (RCZUNIT) must be set on IVB. + * This implements the WaDisableRCZUnitClockGating workaround. + */ + I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE); I915_WRITE(IVB_CHICKEN3, -- cgit v1.2.3-70-g09d2 From e4e0c058a19c41150d12ad2d3023b3cf09c5de67 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 8 Feb 2012 12:53:50 -0800 Subject: drm/i915: gen7: Implement an L3 caching workaround. This adds two cache-related workarounds for Ivy Bridge which can lead to 3D ring hangs and corruptions. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov Signed-off-by: Eugeni Dodonov Signed-off-by: Kenneth Graunke Signed-off-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_reg.h | 7 +++++++ drivers/gpu/drm/i915/intel_display.c | 6 ++++++ 2 files changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 80fd6b5d428..ca4737e5cdf 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3028,6 +3028,13 @@ #define DISP_TILE_SURFACE_SWIZZLING (1<<13) #define DISP_FBC_WM_DIS (1<<15) +/* GEN7 chicken */ +#define GEN7_L3CNTLREG1 0xB01C +#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C + +#define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030 +#define GEN7_WA_L3_CHICKEN_MODE 0x20000000 + /* PCH */ /* south display engine interrupt */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 643c525b288..928840aaeb0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8472,6 +8472,12 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | CHICKEN3_DGMG_DONE_FIX_DISABLE); + /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */ + I915_WRITE(GEN7_L3CNTLREG1, + GEN7_WA_FOR_GEN7_L3_CONTROL); + I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, + GEN7_WA_L3_CHICKEN_MODE); + for_each_pipe(pipe) { I915_WRITE(DSPCNTR(pipe), I915_READ(DSPCNTR(pipe)) | -- cgit v1.2.3-70-g09d2 From db099c8f963fe656108e0a068274c5580a17f69b Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 8 Feb 2012 12:53:51 -0800 Subject: drm/i915: gen7: work around a system hang on IVB This adds the workaround for WaCatErrorRejectionIssue which could result in a system hang. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov Reviewed-by: Kenneth Graunke Signed-off-by: Eugeni Dodonov Signed-off-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_reg.h | 4 ++++ drivers/gpu/drm/i915/intel_display.c | 5 +++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index ca4737e5cdf..4e1ee909a80 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3035,6 +3035,10 @@ #define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030 #define GEN7_WA_L3_CHICKEN_MODE 0x20000000 +/* WaCatErrorRejectionIssue */ +#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 +#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) + /* PCH */ /* south display engine interrupt */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 928840aaeb0..a5276150b8f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8478,6 +8478,11 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); + /* This is required by WaCatErrorRejectionIssue */ + I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, + I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | + GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); + for_each_pipe(pipe) { I915_WRITE(DSPCNTR(pipe), I915_READ(DSPCNTR(pipe)) | -- cgit v1.2.3-70-g09d2 From d71de14ddf423ccc9a2e3f7e37553c99ead20d7c Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Wed, 8 Feb 2012 12:53:52 -0800 Subject: drm/i915: gen7: Disable the RHWO optimization as it can cause GPU hangs. The BSpec Workarounds page states that bits 10 and 26 must be set to avoid 3D ring hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44610 Tested-by: Eugeni Dodonov Signed-off-by: Kenneth Graunke Signed-off-by: Jesse Barnes --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 4 ++++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 4e1ee909a80..03c53fcf865 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3029,6 +3029,9 @@ #define DISP_FBC_WM_DIS (1<<15) /* GEN7 chicken */ +#define GEN7_COMMON_SLICE_CHICKEN1 0x7010 +# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26)) + #define GEN7_L3CNTLREG1 0xB01C #define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a5276150b8f..d9b042b1d14 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8472,6 +8472,10 @@ static void ivybridge_init_clock_gating(struct drm_device *dev) CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE | CHICKEN3_DGMG_DONE_FIX_DISABLE); + /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */ + I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, + GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); + /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */ I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL); -- cgit v1.2.3-70-g09d2 From 3278a55a1aebe2bbd47fbb5196209e5326a88b56 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 9 Feb 2012 14:43:44 -0800 Subject: xhci: Fix oops caused by more USB2 ports than USB3 ports. The code to set the device removable bits in the USB 2.0 roothub descriptor was accidentally looking at the USB 3.0 port registers instead of the USB 2.0 registers. This can cause an oops if there are more USB 2.0 registers than USB 3.0 registers. This should be backported to kernels as old as 2.6.39, that contain the commit 4bbb0ace9a3de8392527e3c87926309d541d3b00 "xhci: Return a USB 3.0 hub descriptor for USB3 roothub." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 35e257f79c7..557b6f32db8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + portsc = xhci_readl(xhci, xhci->usb2_ports[i]); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ -- cgit v1.2.3-70-g09d2 From 7fbd764881a5f9dc81a378293b7a74227fcc04ed Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 26 Aug 2011 00:36:23 +0400 Subject: [SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock If ioc->pci_error_recovery is set, goto out in mpt2sas_base_hard_reset_handler() leads to unlock unheld ioc->reset_in_progress_mutex. The patch fixes the issue by jumping afer mutex_unlock() call. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: "Nandigama, Nagalakshmi" Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 0b2c9558366..a78036f5e1a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -4548,7 +4548,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n", ioc->name, __func__); r = 0; - goto out; + goto out_unlocked; } if (mpt2sas_fwfault_debug) @@ -4604,6 +4604,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); mutex_unlock(&ioc->reset_in_progress_mutex); + out_unlocked: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name, __func__)); return r; -- cgit v1.2.3-70-g09d2 From afa159538af61f1a65d48927f4e949fe514fb4fc Mon Sep 17 00:00:00 2001 From: Janne Grunau Date: Thu, 2 Feb 2012 13:35:21 -0300 Subject: [media] hdpvr: fix race conditon during start of streaming status has to be set to STREAMING before the streaming worker is queued. hdpvr_transmit_buffers() will exit immediately otherwise. Reported-by: Joerg Desch CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/hdpvr-video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index 087f7c08cb8..41fd57b6ccf 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -283,12 +283,13 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev) hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00); + dev->status = STATUS_STREAMING; + INIT_WORK(&dev->worker, hdpvr_transmit_buffers); queue_work(dev->workqueue, &dev->worker); v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev, "streaming started\n"); - dev->status = STATUS_STREAMING; return 0; } -- cgit v1.2.3-70-g09d2 From 68d07f64b8a11a852d48d1b05b724c3e20c0d94b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 13 Feb 2012 16:25:57 -0800 Subject: USB: Don't fail USB3 probe on missing legacy PCI IRQ. Intel has a PCI USB xhci host controller on a new platform. It doesn't have a line IRQ definition in BIOS. The Linux driver refuses to initialize this controller, but Windows works well because it only depends on MSI. Actually, Linux also can work for MSI. This patch avoids the line IRQ checking for USB3 HCDs in usb core PCI probe. It allows the xHCI driver to try to enable MSI or MSI-X first. It will fail the probe if MSI enabling failed and there's no legacy PCI IRQ. This patch should be backported to kernels as old as 2.6.32. Signed-off-by: Alex Shi Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hcd-pci.c | 5 ++++- drivers/usb/core/hcd.c | 6 ++++-- drivers/usb/host/xhci.c | 5 +++++ 3 files changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index d136b8f4c8a..81e2c0d9c17 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; dev->current_state = PCI_D0; - if (!dev->irq) { + /* The xHCI driver supports MSI and MSI-X, + * so don't fail if the BIOS doesn't provide a legacy IRQ. + */ + if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) { dev_err(&dev->dev, "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", pci_name(dev)); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index eb19cba34ac..e1282328fc2 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd, && device_can_wakeup(&hcd->self.root_hub->dev)) dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); - /* enable irqs just before we start the controller */ - if (usb_hcd_is_primary_hcd(hcd)) { + /* enable irqs just before we start the controller, + * if the BIOS provides legacy PCI irqs. + */ + if (usb_hcd_is_primary_hcd(hcd) && irqnum) { retval = usb_hcd_request_irqs(hcd, irqnum, irqflags); if (retval) goto err_request_irq; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6bbe3c3a711..c939f5fdef9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) /* hcd->irq is -1, we have MSI */ return 0; + if (!pdev->irq) { + xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n"); + return -EINVAL; + } + /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); -- cgit v1.2.3-70-g09d2 From b9e44fe5ecda4158c22bc1ea4bffa378a4f83f65 Mon Sep 17 00:00:00 2001 From: "li.rui27@zte.com.cn" Date: Tue, 14 Feb 2012 10:35:01 +0800 Subject: USB: option: cleanup zte 3g-dongle's pid in option.c 1. Remove all old mass-storage ids's pid: 0x0026,0x0053,0x0098,0x0099,0x0149,0x0150,0x0160; 2. As the pid from 0x1401 to 0x1510 which have not surely assigned to use for serial-port or mass-storage port,so i think it should be removed now, and will re-add after it have assigned in future; 3. sort the pid to WCDMA and CDMA. Signed-off-by: Rui li Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 143 ++++---------------------------------------- 1 file changed, 13 insertions(+), 130 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 39ed1f46cec..b54afceb961 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -788,7 +788,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), @@ -803,7 +802,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, - /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, @@ -828,7 +826,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, @@ -836,7 +833,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff), @@ -846,7 +842,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) }, @@ -865,8 +860,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, @@ -887,28 +880,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, @@ -1083,127 +1066,27 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, - 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-70-g09d2 From bab6f610640a92b6b40e6b732f520a6e0c85dbbe Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 2 Feb 2012 14:40:30 -0300 Subject: [media] wl128x: fix build errors when GPIOLIB is not enabled From: Randy Dunlap Fix wl128x Kconfig to depend on GPIOLIB since TI_ST also depends on GPIOLIB. (.text+0xe6d60): undefined reference to `st_register' (.text+0xe7016): undefined reference to `st_unregister' (.text+0xe70ce): undefined reference to `st_unregister' Signed-off-by: Randy Dunlap Acked-by: Manjunatha Halli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/wl128x/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index 86b28579f0c..ea1e6545df3 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -4,8 +4,8 @@ menu "Texas Instruments WL128x FM driver (ST based)" config RADIO_WL128X tristate "Texas Instruments WL128x FM Radio" - depends on VIDEO_V4L2 && RFKILL - select TI_ST if NET && GPIOLIB + depends on VIDEO_V4L2 && RFKILL && GPIOLIB + select TI_ST if NET help Choose Y here if you have this FM radio chip. -- cgit v1.2.3-70-g09d2 From fda27874de91d5a8b9a018b3bc74b14578994908 Mon Sep 17 00:00:00 2001 From: Taylor Ralph Date: Thu, 20 Oct 2011 23:33:23 -0300 Subject: [media] hdpvr: update picture controls to support firmware versions > 0.15 Correctly sets the max/min/default values for the hdpvr picture controls. The reason the current values didn't cause a problem until now is because any firmware <= 0.15 didn't support them. The latest firmware releases properly support picture controls and the values in the patch are derived from the windows driver using SniffUSB2.0. Thanks to Devin Heitmueller for helping me. Signed-off-by: Taylor Ralph Thanks-to: Devin Heitmueller Acked-by: Jarod Wilson Reviewed-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/hdpvr-core.c | 18 +++++++++++--- drivers/media/video/hdpvr/hdpvr-video.c | 43 ++++++++++++++++++++++++--------- drivers/media/video/hdpvr/hdpvr.h | 1 + 3 files changed, 47 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index 441dacf642b..687282d8749 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -154,10 +154,20 @@ static int device_authorization(struct hdpvr_device *dev) } #endif + dev->fw_ver = dev->usbc_buf[1]; + v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n", - dev->usbc_buf[1], &dev->usbc_buf[2]); + dev->fw_ver, &dev->usbc_buf[2]); + + if (dev->fw_ver > 0x15) { + dev->options.brightness = 0x80; + dev->options.contrast = 0x40; + dev->options.hue = 0xf; + dev->options.saturation = 0x40; + dev->options.sharpness = 0x80; + } - switch (dev->usbc_buf[1]) { + switch (dev->fw_ver) { case HDPVR_FIRMWARE_VERSION: dev->flags &= ~HDPVR_FLAG_AC3_CAP; break; @@ -169,7 +179,7 @@ static int device_authorization(struct hdpvr_device *dev) default: v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might" " not work.\n"); - if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3) + if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3) dev->flags |= HDPVR_FLAG_AC3_CAP; else dev->flags &= ~HDPVR_FLAG_AC3_CAP; @@ -270,6 +280,8 @@ static const struct hdpvr_options hdpvr_default_options = { .bitrate_mode = HDPVR_CONSTANT, .gop_mode = HDPVR_SIMPLE_IDR_GOP, .audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC, + /* original picture controls for firmware version <= 0x15 */ + /* updated in device_authorization() for newer firmware */ .brightness = 0x86, .contrast = 0x80, .hue = 0x80, diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index 41fd57b6ccf..11ffe9cc178 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -723,21 +723,39 @@ static const s32 supported_v4l2_ctrls[] = { }; static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc, - int ac3) + int ac3, int fw_ver) { int err; + if (fw_ver > 0x15) { + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf); + case V4L2_CID_SHARPNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + } + } else { + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86); + case V4L2_CID_CONTRAST: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + case V4L2_CID_SHARPNESS: + return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); + } + } + switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86); - case V4L2_CID_CONTRAST: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); - case V4L2_CID_SATURATION: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); - case V4L2_CID_SHARPNESS: - return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80); case V4L2_CID_MPEG_AUDIO_ENCODING: return v4l2_ctrl_query_fill( qc, V4L2_MPEG_AUDIO_ENCODING_AAC, @@ -795,7 +813,8 @@ static int vidioc_queryctrl(struct file *file, void *private_data, if (qc->id == supported_v4l2_ctrls[i]) return fill_queryctrl(&dev->options, qc, - dev->flags & HDPVR_FLAG_AC3_CAP); + dev->flags & HDPVR_FLAG_AC3_CAP, + dev->fw_ver); if (qc->id < supported_v4l2_ctrls[i]) break; diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index d6439db1d18..fea3c692699 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -113,6 +113,7 @@ struct hdpvr_device { /* usb control transfer buffer and lock */ struct mutex usbc_mutex; u8 *usbc_buf; + u8 fw_ver; }; static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev) -- cgit v1.2.3-70-g09d2 From 1c8ecf80fdee4e7b23a9e7da7ff9bd59ba2dcf96 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Tue, 14 Feb 2012 11:44:48 -0200 Subject: drm/i915: do not enable RC6p on Sandy Bridge With base on latest findings, RC6p seems to be respondible for RC6-related issues on Sandy Bridge platform. To work-around those issues, the previous solution was to completely disable RC6 on Sandy Bridge for the past few releases, even if plain RC6 was not giving any issues. What this patch does is preventing RC6p from being enabled on Sandy Bridge even if users enable RC6 via a kernel parameter. So it won't change the defaults in any way, but will ensure that if users do enable RC6 manually it won't break their machines by enabling this extra state. Proper fix for this (enabling specific RC6 states according to the GPU generation) were proposed for the -next kernel, but we are too late in the release process now to pick such changes. Acked-by: Keith Packard Signed-off-by: Eugeni Dodonov Signed-off-by: Jesse Barnes --- drivers/gpu/drm/i915/intel_display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d9b042b1d14..049804eee29 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8182,8 +8182,8 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ if (intel_enable_rc6(dev_priv->dev)) - rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | - GEN6_RC_CTL_RC6_ENABLE; + rc6_mask = GEN6_RC_CTL_RC6_ENABLE | + (IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0; I915_WRITE(GEN6_RC_CONTROL, rc6_mask | -- cgit v1.2.3-70-g09d2 From 1109bf8bcbf455e4cfebce862f9f9fa5a2f386e9 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 14 Feb 2012 16:52:41 +0900 Subject: drm/exynos: Fix typo in exynos_mixer.c Correct spelling "sucessful" to "successful" in drivers/gpu/drm/exynos/exynos_mixer.c Signed-off-by: Masanari Iida Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index ac24cff3977..33afd0cf036 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1044,7 +1044,7 @@ static int mixer_remove(struct platform_device *pdev) platform_get_drvdata(pdev); struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx; - dev_info(dev, "remove sucessful\n"); + dev_info(dev, "remove successful\n"); mixer_resource_poweroff(ctx); mixer_resources_cleanup(ctx); -- cgit v1.2.3-70-g09d2 From 44a0e022b86a8c12ed06c02f52045c8f9f118bb1 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 15 Feb 2012 11:25:17 +0900 Subject: drm/exynos: changed priority of mixer layers. Signed-off-by: Joonyoung Shim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_mixer.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 33afd0cf036..47961679c44 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -779,15 +779,15 @@ static void mixer_win_reset(struct mixer_context *ctx) mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST, MXR_STATUS_BURST_MASK); - /* setting default layer priority: layer1 > video > layer0 + /* setting default layer priority: layer1 > layer0 > video * because typical usage scenario would be + * layer1 - OSD * layer0 - framebuffer * video - video overlay - * layer1 - OSD */ - val = MXR_LAYER_CFG_GRP0_VAL(1); - val |= MXR_LAYER_CFG_VP_VAL(2); - val |= MXR_LAYER_CFG_GRP1_VAL(3); + val = MXR_LAYER_CFG_GRP1_VAL(3); + val |= MXR_LAYER_CFG_GRP0_VAL(2); + val |= MXR_LAYER_CFG_VP_VAL(1); mixer_reg_write(res, MXR_LAYER_CFG, val); /* setting background color */ -- cgit v1.2.3-70-g09d2 From 6f811502a473a32a9b892fb35d77b8f91dc7484c Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 15 Feb 2012 11:25:18 +0900 Subject: drm/exynos: removed pageflip_event_list init code when closed. if one process is terminated by ctrl-c while two processes are using pageflip feature then for last pageflip event, user can't get poll from kernel side so this patch fixes the problem. Signed-off-by: Joonyoung Shim Signed-off-by: Inki Dae Signed-off-by: Kyoungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_drv.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 35889ca255e..2ef12aa3030 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -141,16 +141,10 @@ static int exynos_drm_unload(struct drm_device *dev) } static void exynos_drm_preclose(struct drm_device *dev, - struct drm_file *file_priv) + struct drm_file *file) { - struct exynos_drm_private *dev_priv = dev->dev_private; + DRM_DEBUG_DRIVER("%s\n", __FILE__); - /* - * drm framework frees all events at release time, - * so private event list should be cleared. - */ - if (!list_empty(&dev_priv->pageflip_event_list)) - INIT_LIST_HEAD(&dev_priv->pageflip_event_list); } static void exynos_drm_lastclose(struct drm_device *dev) -- cgit v1.2.3-70-g09d2 From d081f5660422270856b77bcbbaa312138f556c9e Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 15 Feb 2012 11:25:19 +0900 Subject: drm/exynos: added possible_clones setup function. basically, all crtcs are possible to clone each other. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_core.c | 3 +++ drivers/gpu/drm/exynos/exynos_drm_drv.c | 4 ++++ drivers/gpu/drm/exynos/exynos_drm_encoder.c | 34 +++++++++++++++++++++++++++++ drivers/gpu/drm/exynos/exynos_drm_encoder.h | 1 + 4 files changed, 42 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c index 661a03571d0..d08a55896d5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_core.c +++ b/drivers/gpu/drm/exynos/exynos_drm_core.c @@ -193,6 +193,9 @@ int exynos_drm_subdrv_register(struct exynos_drm_subdrv *subdrv) return err; } + /* setup possible_clones. */ + exynos_drm_encoder_setup(drm_dev); + /* * if any specific driver such as fimd or hdmi driver called * exynos_drm_subdrv_register() later than drm_load(), diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 2ef12aa3030..76a111f54cc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -33,6 +33,7 @@ #include "exynos_drm_drv.h" #include "exynos_drm_crtc.h" +#include "exynos_drm_encoder.h" #include "exynos_drm_fbdev.h" #include "exynos_drm_fb.h" #include "exynos_drm_gem.h" @@ -99,6 +100,9 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags) if (ret) goto err_vblank; + /* setup possible_clones. */ + exynos_drm_encoder_setup(dev); + /* * create and configure fb helper and also exynos specific * fbdev object. diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 86b93dde219..ef4754f1519 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -195,6 +195,40 @@ static struct drm_encoder_funcs exynos_encoder_funcs = { .destroy = exynos_drm_encoder_destroy, }; +static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder) +{ + struct drm_encoder *clone; + struct drm_device *dev = encoder->dev; + struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder); + struct exynos_drm_display_ops *display_ops = + exynos_encoder->manager->display_ops; + unsigned int clone_mask = 0; + int cnt = 0; + + list_for_each_entry(clone, &dev->mode_config.encoder_list, head) { + switch (display_ops->type) { + case EXYNOS_DISPLAY_TYPE_LCD: + case EXYNOS_DISPLAY_TYPE_HDMI: + clone_mask |= (1 << (cnt++)); + break; + default: + continue; + } + } + + return clone_mask; +} + +void exynos_drm_encoder_setup(struct drm_device *dev) +{ + struct drm_encoder *encoder; + + DRM_DEBUG_KMS("%s\n", __FILE__); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + encoder->possible_clones = exynos_drm_encoder_clones(encoder); +} + struct drm_encoder * exynos_drm_encoder_create(struct drm_device *dev, struct exynos_drm_manager *manager, diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h index 97b087a51cb..eb7d2316847 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h @@ -30,6 +30,7 @@ struct exynos_drm_manager; +void exynos_drm_encoder_setup(struct drm_device *dev); struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev, struct exynos_drm_manager *mgr, unsigned int possible_crtcs); -- cgit v1.2.3-70-g09d2 From c5614ae326c7fdd244d8e0365b8b78d5e3cd5bf4 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 15 Feb 2012 11:25:20 +0900 Subject: drm/exynos: fixed page flip issue. with vblank_refcount = 1, there was the case that drm_vblank_put is called by specific page flip function so this patch fixes the issue. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 6 +++--- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 7 ++++++- drivers/gpu/drm/exynos/exynos_mixer.c | 7 ++++++- 3 files changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e3861ac4929..de818831a51 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -307,9 +307,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, */ event->pipe = exynos_crtc->pipe; - list_add_tail(&event->base.link, - &dev_priv->pageflip_event_list); - ret = drm_vblank_get(dev, exynos_crtc->pipe); if (ret) { DRM_DEBUG("failed to acquire vblank counter\n"); @@ -318,6 +315,9 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, goto out; } + list_add_tail(&event->base.link, + &dev_priv->pageflip_event_list); + crtc->fb = fb; ret = exynos_drm_crtc_update(crtc); if (ret) { diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index b6a737d196a..0dbb32bb18a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -604,7 +604,12 @@ static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc) } if (is_checked) { - drm_vblank_put(drm_dev, crtc); + /* + * call drm_vblank_put only in case that drm_vblank_get was + * called. + */ + if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0) + drm_vblank_put(drm_dev, crtc); /* * don't off vblank if vblank_disable_allowed is 1, diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 47961679c44..93846e810e3 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -712,7 +712,12 @@ static void mixer_finish_pageflip(struct drm_device *drm_dev, int crtc) } if (is_checked) - drm_vblank_put(drm_dev, crtc); + /* + * call drm_vblank_put only in case that drm_vblank_get was + * called. + */ + if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0) + drm_vblank_put(drm_dev, crtc); spin_unlock_irqrestore(&drm_dev->event_lock, flags); } -- cgit v1.2.3-70-g09d2 From bc41eae2c84694667c1d7747fa28db8e75948ac4 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 15 Feb 2012 11:25:21 +0900 Subject: drm/exynos: removed exynos_drm_fbdev_recreate function. this function ins't needed anymore. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 70 ++----------------------------- 1 file changed, 4 insertions(+), 66 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index d7ae29d2f3d..3508700e529 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -195,66 +195,6 @@ out: return ret; } -static bool -exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb, - struct drm_fb_helper_surface_size *sizes) -{ - if (fb->width != sizes->surface_width) - return false; - if (fb->height != sizes->surface_height) - return false; - if (fb->bits_per_pixel != sizes->surface_bpp) - return false; - if (fb->depth != sizes->surface_depth) - return false; - - return true; -} - -static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper, - struct drm_fb_helper_surface_size *sizes) -{ - struct drm_device *dev = helper->dev; - struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper); - struct exynos_drm_gem_obj *exynos_gem_obj; - struct drm_framebuffer *fb = helper->fb; - struct drm_mode_fb_cmd2 mode_cmd = { 0 }; - unsigned long size; - - DRM_DEBUG_KMS("%s\n", __FILE__); - - if (exynos_drm_fbdev_is_samefb(fb, sizes)) - return 0; - - mode_cmd.width = sizes->surface_width; - mode_cmd.height = sizes->surface_height; - mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3); - mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, - sizes->surface_depth); - - if (exynos_fbdev->exynos_gem_obj) - exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj); - - if (fb->funcs->destroy) - fb->funcs->destroy(fb); - - size = mode_cmd.pitches[0] * mode_cmd.height; - exynos_gem_obj = exynos_drm_gem_create(dev, size); - if (IS_ERR(exynos_gem_obj)) - return PTR_ERR(exynos_gem_obj); - - exynos_fbdev->exynos_gem_obj = exynos_gem_obj; - - helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd, - &exynos_gem_obj->base); - if (IS_ERR_OR_NULL(helper->fb)) { - DRM_ERROR("failed to create drm framebuffer.\n"); - return PTR_ERR(helper->fb); - } - - return exynos_drm_fbdev_update(helper, helper->fb); -} - static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, struct drm_fb_helper_surface_size *sizes) { @@ -262,6 +202,10 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, DRM_DEBUG_KMS("%s\n", __FILE__); + /* + * with !helper->fb, it means that this funcion is called first time + * and after that, the helper->fb would be used as clone mode. + */ if (!helper->fb) { ret = exynos_drm_fbdev_create(helper, sizes); if (ret < 0) { @@ -274,12 +218,6 @@ static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper, * because register_framebuffer() should be called. */ ret = 1; - } else { - ret = exynos_drm_fbdev_recreate(helper, sizes); - if (ret < 0) { - DRM_ERROR("failed to reconfigure fbdev\n"); - return ret; - } } return ret; -- cgit v1.2.3-70-g09d2 From 53ef299f3900bc1deb163b94d4f1cac4f3346152 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 15 Feb 2012 11:25:22 +0900 Subject: drm/exynos: added postclose to release resource. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Signed-off-by: Dave Airlie --- drivers/gpu/drm/exynos/exynos_drm_drv.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 76a111f54cc..58820ebd355 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -151,6 +151,17 @@ static void exynos_drm_preclose(struct drm_device *dev, } +static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file) +{ + DRM_DEBUG_DRIVER("%s\n", __FILE__); + + if (!file->driver_priv) + return; + + kfree(file->driver_priv); + file->driver_priv = NULL; +} + static void exynos_drm_lastclose(struct drm_device *dev) { DRM_DEBUG_DRIVER("%s\n", __FILE__); @@ -193,6 +204,7 @@ static struct drm_driver exynos_drm_driver = { .unload = exynos_drm_unload, .preclose = exynos_drm_preclose, .lastclose = exynos_drm_lastclose, + .postclose = exynos_drm_postclose, .get_vblank_counter = drm_vblank_count, .enable_vblank = exynos_drm_crtc_enable_vblank, .disable_vblank = exynos_drm_crtc_disable_vblank, -- cgit v1.2.3-70-g09d2 From 656d9125376006cf696b0836f1c6723a892629ca Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 17 Feb 2012 10:29:22 +0100 Subject: [S390] 3215 deadlock with tty_wakeup The 3215 driver calls tty_wakeup from irq context while holding the device spinlock. If printk is called by any function on the callchain starting from tty_wakeup the system deadlocks on the device spinlock. Using a tasklet to call tty_wakup solves the problem. Signed-off-by: Martin Schwidefsky --- drivers/s390/char/con3215.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 934458ad55e..e71a50d4b22 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -87,6 +87,7 @@ struct raw3215_info { struct tty_struct *tty; /* pointer to tty structure if present */ struct raw3215_req *queued_read; /* pointer to queued read requests */ struct raw3215_req *queued_write;/* pointer to queued write requests */ + struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */ wait_queue_head_t empty_wait; /* wait queue for flushing */ struct timer_list timer; /* timer for delayed output */ int line_pos; /* position on the line (for tabs) */ @@ -333,20 +334,24 @@ static inline void raw3215_try_io(struct raw3215_info *raw) } } +/* + * Call tty_wakeup from tasklet context + */ +static void raw3215_wakeup(unsigned long data) +{ + struct raw3215_info *raw = (struct raw3215_info *) data; + tty_wakeup(raw->tty); +} + /* * Try to start the next IO and wake up processes waiting on the tty. */ static void raw3215_next_io(struct raw3215_info *raw) { - struct tty_struct *tty; - raw3215_mk_write_req(raw); raw3215_try_io(raw); - tty = raw->tty; - if (tty != NULL && - RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) { - tty_wakeup(tty); - } + if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) + tasklet_schedule(&raw->tlet); } /* @@ -682,6 +687,7 @@ static int raw3215_probe (struct ccw_device *cdev) return -ENOMEM; } init_waitqueue_head(&raw->empty_wait); + tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw); dev_set_drvdata(&cdev->dev, raw); cdev->handler = raw3215_irq; @@ -901,6 +907,7 @@ static int __init con3215_init(void) raw->flags |= RAW3215_FIXED; init_waitqueue_head(&raw->empty_wait); + tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw); /* Request the console irq */ if (raw3215_startup(raw) != 0) { @@ -966,6 +973,7 @@ static void tty3215_close(struct tty_struct *tty, struct file * filp) tty->closing = 1; /* Shutdown the terminal */ raw3215_shutdown(raw); + tasklet_kill(&raw->tlet); tty->closing = 0; raw->tty = NULL; } -- cgit v1.2.3-70-g09d2 From a92fa25c63a788758bd52e9123504d133210c8b7 Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Mon, 16 Jan 2012 19:30:25 -0200 Subject: [SCSI] ipr: fix eeh recovery for 64-bit adapters In some scenarios, an EEH error can take a long time to be detected, since the driver issues an MMIO read only after a device reset command times out and we try to reset the adapter. This patch adds some code in ipr_cancel_op() to read a hardware register so we detect the error earlier in case the op is being aborted because of a timeout caused by a frozen adapter slot. Another problem in such scenarios is that in __ipr_eh_host_reset() we change the dump state flag from WAIT_FOR_DUMP to GET_DUMP, and the flag is later changed from GET_DUMP to READ_DUMP in ipr_reset_restore_cfg_space(). However, if when __ipr_eh_host_reset() is called by the SCSI error handling the function ipr_reset_restore_cfg_space() has already been called by the PCI EEH code, we end up with the flag in an inconsistent state. This patch also prevents this problem. Signed-off-by: Kleber Sacilotto de Souza Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 67b169b7a5b..b538f0883fd 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4613,11 +4613,13 @@ static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd) ENTER; ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata; - dev_err(&ioa_cfg->pdev->dev, - "Adapter being reset as a result of error recovery.\n"); + if (!ioa_cfg->in_reset_reload) { + dev_err(&ioa_cfg->pdev->dev, + "Adapter being reset as a result of error recovery.\n"); - if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) - ioa_cfg->sdt_state = GET_DUMP; + if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) + ioa_cfg->sdt_state = GET_DUMP; + } rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV); @@ -4907,7 +4909,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) struct ipr_ioa_cfg *ioa_cfg; struct ipr_resource_entry *res; struct ipr_cmd_pkt *cmd_pkt; - u32 ioasc; + u32 ioasc, int_reg; int op_found = 0; ENTER; @@ -4920,7 +4922,17 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) */ if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead) return FAILED; - if (!res || !ipr_is_gscsi(res)) + if (!res) + return FAILED; + + /* + * If we are aborting a timed out op, chances are that the timeout was caused + * by a still not detected EEH error. In such cases, reading a register will + * trigger the EEH recovery infrastructure. + */ + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); + + if (!ipr_is_gscsi(res)) return FAILED; list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) { -- cgit v1.2.3-70-g09d2 From 6d7938f46f89c9773f9396c1d13b20bbc5c6d95b Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 27 Jan 2012 11:17:37 -0800 Subject: [SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded NULL orom ptr passed in for verification which caused page fault. We will set a default version when we don't have orom struct. Reported-by: Dan Melnic Signed-off-by: Dave Jiang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/host.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 1a65d651423..418391b1c36 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1848,9 +1848,11 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) if (state == SCIC_RESET || state == SCIC_INITIALIZING || state == SCIC_INITIALIZED) { + u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version : + ISCI_ROM_VER_1_0; if (sci_oem_parameters_validate(&ihost->oem_parameters, - pci_info->orom->hdr.version)) + oem_version)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; return SCI_SUCCESS; -- cgit v1.2.3-70-g09d2 From a55aac79de0ea6fc52d35f535867b6573a5ff0f8 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:14:03 -0800 Subject: [SCSI] qla2xxx: Propagate up abort failures. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4ed1e4a96b9..b4b185c7bad 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -877,6 +877,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) spin_unlock_irqrestore(&ha->hardware_lock, flags); if (ha->isp_ops->abort_command(sp)) { + ret = FAILED; ql_dbg(ql_dbg_taskm, vha, 0x8003, "Abort command mbx failed cmd=%p.\n", cmd); } else { -- cgit v1.2.3-70-g09d2 From aa651be83dfec5587dabce0a9d471c1e2095c33e Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:14:04 -0800 Subject: [SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index b4b185c7bad..5fd89d76168 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -625,6 +625,12 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) cmd->result = DID_NO_CONNECT << 16; goto qc24_fail_command; } + + if (!fcport) { + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } + if (atomic_read(&fcport->state) != FCS_ONLINE) { if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD || atomic_read(&base_vha->loop_state) == LOOP_DEAD) { -- cgit v1.2.3-70-g09d2 From d051a5aa1c234c8de01fc0a488b1a18d65246150 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:14:05 -0800 Subject: [SCSI] qla2xxx: Add an "is reset active" helper. Many locations within the driver would use an inconsistent set of checks to determine ISP-reset state. Consolidate the checks into this inline-helper. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 13 ++++------ drivers/scsi/qla2xxx/qla_bsg.c | 50 +++++++-------------------------------- drivers/scsi/qla2xxx/qla_dbg.c | 3 ++- drivers/scsi/qla2xxx/qla_inline.h | 13 ++++++++++ 4 files changed, 28 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index a2f1b3043df..9f41b3b4358 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1036,8 +1036,7 @@ qla2x00_link_state_show(struct device *dev, struct device_attribute *attr, vha->device_flags & DFLG_NO_CABLE) len = snprintf(buf, PAGE_SIZE, "Link Down\n"); else if (atomic_read(&vha->loop_state) != LOOP_READY || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + qla2x00_reset_active(vha)) len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n"); else { len = snprintf(buf, PAGE_SIZE, "Link Up - "); @@ -1359,8 +1358,7 @@ qla2x00_thermal_temp_show(struct device *dev, return snprintf(buf, PAGE_SIZE, "\n"); temp = frac = 0; - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + if (qla2x00_reset_active(vha)) ql_log(ql_log_warn, vha, 0x707b, "ISP reset active.\n"); else if (!vha->hw->flags.eeh_busy) @@ -1379,8 +1377,7 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr, int rval = QLA_FUNCTION_FAILED; uint16_t state[5]; - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) + if (qla2x00_reset_active(vha)) ql_log(ql_log_warn, vha, 0x707c, "ISP reset active.\n"); else if (!vha->hw->flags.eeh_busy) @@ -1693,9 +1690,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) if (IS_FWI2_CAPABLE(ha)) { rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma); } else if (atomic_read(&base_vha->loop_state) == LOOP_READY && - !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) && - !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) && - !ha->dpc_active) { + !qla2x00_reset_active(vha) && !ha->dpc_active) { /* Must be in a 'READY' state for statistics retrieval. */ rval = qla2x00_get_link_status(base_vha, base_vha->loop_id, stats, stats_dma); diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index b1d0f936bf2..1682e2e4201 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -108,13 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job) goto exit_fcp_prio_cfg; } - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ret = -EBUSY; - goto exit_fcp_prio_cfg; - } - /* Get the sub command */ oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; @@ -646,13 +639,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) dma_addr_t rsp_data_dma; uint32_t rsp_data_len; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n"); - return -EBUSY; - } - if (!vha->flags.online) { ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n"); return -EIO; @@ -874,13 +860,6 @@ qla84xx_reset(struct fc_bsg_job *bsg_job) int rval = 0; uint32_t flag; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n"); - return -EBUSY; - } - if (!IS_QLA84XX(ha)) { ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n"); return -EINVAL; @@ -922,11 +901,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job) uint32_t flag; uint32_t fw_ver; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) - return -EBUSY; - if (!IS_QLA84XX(ha)) { ql_dbg(ql_dbg_user, vha, 0x7032, "Not 84xx, exiting.\n"); @@ -1036,14 +1010,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) uint32_t data_len = 0; uint32_t dma_direction = DMA_NONE; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x7039, - "Abort active or needed.\n"); - return -EBUSY; - } - if (!IS_QLA84XX(ha)) { ql_log(ql_log_warn, vha, 0x703a, "Not 84xx, exiting.\n"); @@ -1246,13 +1212,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job) bsg_job->reply->reply_payload_rcv_len = 0; - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n"); - return -EBUSY; - } - if (!IS_IIDMA_CAPABLE(vha->hw)) { ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n"); return -EINVAL; @@ -1668,6 +1627,15 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) vha = shost_priv(host); } + if (qla2x00_reset_active(vha)) { + ql_dbg(ql_dbg_user, vha, 0x709f, + "BSG: ISP abort active/needed -- cmd=%d.\n", + bsg_job->request->msgcode); + bsg_job->reply->result = (DID_ERROR << 16); + bsg_job->job_done(bsg_job); + return -EBUSY; + } + ql_dbg(ql_dbg_user, vha, 0x7000, "Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode); diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 7c54624b5b1..45cbf0ba624 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -19,7 +19,8 @@ * | DPC Thread | 0x401c | | * | Async Events | 0x5057 | 0x5052 | * | Timer Routines | 0x6011 | 0x600e,0x600f | - * | User Space Interactions | 0x709e | | + * | User Space Interactions | 0x709e | 0x7018,0x702e | + * | | | 0x7039,0x7045 | * | Task Management | 0x803c | 0x8025-0x8026 | * | | | 0x800b,0x8039 | * | AER/EEH | 0x900f | | diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 9902834e0b7..7cc4f36cd53 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -131,3 +131,16 @@ qla2x00_hba_err_chk_enabled(srb_t *sp) } return 0; } + +static inline int +qla2x00_reset_active(scsi_qla_host_t *vha) +{ + scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev); + + /* Test appropriate base-vha and vha flags. */ + return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) || + test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) || + test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); +} -- cgit v1.2.3-70-g09d2 From 4ba988db8d60eb16b7da69f9e3705b52ac8a6540 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:14:06 -0800 Subject: [SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command. Not clearing the options flags in mbx1 could lead the firmware into interpreting old data in mbx1 through mbx8. This could lead to inadvertent DMA read/write operations to stale memory. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 34344d3f865..8635722332a 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2581,7 +2581,8 @@ qla2x00_stop_firmware(scsi_qla_host_t *vha) ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__); mcp->mb[0] = MBC_STOP_FIRMWARE; - mcp->out_mb = MBX_0; + mcp->mb[1] = 0; + mcp->out_mb = MBX_1|MBX_0; mcp->in_mb = MBX_0; mcp->tov = 5; mcp->flags = 0; -- cgit v1.2.3-70-g09d2 From 7cb0eb1c17fa69535b6b2a80296c2f2ca300b800 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:14:07 -0800 Subject: [SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing. This can cause instability in mailbox command state machine handling. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index e804585cc59..349843ea32f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2090,7 +2090,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha, break; case CT_IOCB_TYPE: qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE); - clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags); break; case ELS_IOCB_TYPE: qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE); -- cgit v1.2.3-70-g09d2 From 67ddda353c4e26ba23a199ae64fdf283b669469b Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:14:08 -0800 Subject: [SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers. ISP2200 adapters only have 24 mailbox registers so read only that many. Reported-by: Olatunji Ruwase Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_os.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index a6a4eebce4a..af1003f9de1 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -44,6 +44,7 @@ * ISP2100 HBAs. */ #define MAILBOX_REGISTER_COUNT_2100 8 +#define MAILBOX_REGISTER_COUNT_2200 24 #define MAILBOX_REGISTER_COUNT 32 #define QLA2200A_RISC_ROM_VER 4 diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 5fd89d76168..7e617a60e71 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2054,7 +2054,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_data_off = ~0; ha->isp_ops = &qla2100_isp_ops; } else if (IS_QLA2200(ha)) { - ha->mbx_count = MAILBOX_REGISTER_COUNT; + ha->mbx_count = MAILBOX_REGISTER_COUNT_2200; req_length = REQUEST_ENTRY_CNT_2200; rsp_length = RESPONSE_ENTRY_CNT_2100; ha->max_loop_id = SNS_LAST_LOOP_ID_2100; -- cgit v1.2.3-70-g09d2 From c7a992784240c1b16425c6a9606c9db0fc28fb0c Mon Sep 17 00:00:00 2001 From: Michael Christie Date: Thu, 9 Feb 2012 11:14:09 -0800 Subject: [SCSI] qla2xxx: Remove check for null fcport from host reset handler. Remove the check for a NULL fcport so that the host reset will run unconditionally to unwedge any commands before the device is offlined and to prevent a quick runthrough of the SCSI error handling. Signed-off-by: Michael Christie Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 7e617a60e71..036030c9533 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1131,7 +1131,6 @@ static int qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *vha = shost_priv(cmd->device->host); - fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata; struct qla_hw_data *ha = vha->hw; int ret = FAILED; unsigned int id, lun; @@ -1140,15 +1139,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) id = cmd->device->id; lun = cmd->device->lun; - if (!fcport) { - return ret; - } - - ret = fc_block_scsi_eh(cmd); - if (ret != 0) - return ret; - ret = FAILED; - ql_log(ql_log_info, vha, 0x8018, "ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun); -- cgit v1.2.3-70-g09d2 From d33609607c5abc0b4b31d238e33f3ab075e2f96f Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Thu, 9 Feb 2012 11:14:10 -0800 Subject: [SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle. Complete the mailbox command timed out before initiating another abort cycle to recover so that mailbox commands issued during next reset cycle don't fail due to pending mailbox access timeout. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 8635722332a..08f1d01bdc1 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -342,6 +342,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + /* Allow next mbx cmd to come in. */ + complete(&ha->mbx_cmd_comp); if (ha->isp_ops->abort_isp(vha)) { /* Failed. retry later. */ set_bit(ISP_ABORT_NEEDED, @@ -350,6 +352,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); ql_dbg(ql_dbg_mbx, base_vha, 0x101f, "Finished abort_isp.\n"); + goto mbx_done; } } } @@ -358,6 +361,7 @@ premature_exit: /* Allow next mbx cmd to come in. */ complete(&ha->mbx_cmd_comp); +mbx_done: if (rval) { ql_dbg(ql_dbg_mbx, base_vha, 0x1020, "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n", -- cgit v1.2.3-70-g09d2 From 5a034bb3c33aad59769e7289716c8d1f075b3894 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Thu, 9 Feb 2012 11:14:11 -0800 Subject: [SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx. With IOs running and PegHalt testing the system reboots when memory reset is performed during device initialization. Signed-off-by: Shyam Sundar Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 1cd46cd7ff9..bb06c20a822 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -1165,19 +1165,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha) qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); else qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); - - /* reset ms */ - val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); - val |= (1 << 1); - qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); - msleep(20); - - /* unreset ms */ - val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); - val &= ~(1 << 1); - qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); - msleep(20); - qla82xx_rom_unlock(ha); /* Read the signature value from the flash. -- cgit v1.2.3-70-g09d2 From 2cc97965e4f6e84792b958d4ad10631274d42834 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Thu, 9 Feb 2012 11:14:12 -0800 Subject: [SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index bb06c20a822..270ba3130fd 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3379,7 +3379,7 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) QLA82XX_CRB_PEG_NET_3 + 0x3c), qla82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c)); - if (LSW(MSB(halt_status)) == 0x67) + if (((halt_status & 0x1fffff00) >> 8) == 0x67) ql_log(ql_log_warn, vha, 0xb052, "Firmware aborted with " "error code 0x00006700. Device is " -- cgit v1.2.3-70-g09d2 From 477e3e9ffc13e99918b916a294dcc2d306b677a5 Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:14:13 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.03.07.13-k. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 23f33a6d52d..29d780c3804 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.12-k" +#define QLA2XXX_VERSION "8.03.07.13-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- cgit v1.2.3-70-g09d2 From 267a6ad4aefaafbde607804c60945bcf97f91c1b Mon Sep 17 00:00:00 2001 From: Huajun Li Date: Sun, 12 Feb 2012 19:59:14 +0800 Subject: [SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost' In do_scan_async(), calling scsi_autopm_put_host(shost) may reference freed shost, and cause Posison overwitten warning. Yes, this case can happen, for example, an USB is disconnected just when do_scan_async() thread starts to run, then scsi_host_put() called in scsi_finish_async_scan() will lead to shost be freed(because the refcount of shost->shost_gendev decreases to 1 after USB disconnects), at this point, if references shost again, system will show following warning msg. To make scsi_autopm_put_host(shost) always reference a valid shost, put it just before scsi_host_put() in function scsi_finish_async_scan(). [ 299.281565] ============================================================================= [ 299.281634] BUG kmalloc-4096 (Tainted: G I ): Poison overwritten [ 299.281682] ----------------------------------------------------------------------------- [ 299.281684] [ 299.281752] INFO: 0xffff880056c305d0-0xffff880056c305d0. First byte 0x6a instead of 0x6b [ 299.281816] INFO: Allocated in scsi_host_alloc+0x4a/0x490 age=1688 cpu=1 pid=2004 [ 299.281870] __slab_alloc+0x617/0x6c1 [ 299.281901] __kmalloc+0x28c/0x2e0 [ 299.281931] scsi_host_alloc+0x4a/0x490 [ 299.281966] usb_stor_probe1+0x5b/0xc40 [usb_storage] [ 299.282010] storage_probe+0xa4/0xe0 [usb_storage] [ 299.282062] usb_probe_interface+0x172/0x330 [usbcore] [ 299.282105] driver_probe_device+0x257/0x3b0 [ 299.282138] __driver_attach+0x103/0x110 [ 299.282171] bus_for_each_dev+0x8e/0xe0 [ 299.282201] driver_attach+0x26/0x30 [ 299.282230] bus_add_driver+0x1c4/0x430 [ 299.282260] driver_register+0xb6/0x230 [ 299.282298] usb_register_driver+0xe5/0x270 [usbcore] [ 299.282337] 0xffffffffa04ab03d [ 299.282364] do_one_initcall+0x47/0x230 [ 299.282396] sys_init_module+0xa0f/0x1fe0 [ 299.282429] INFO: Freed in scsi_host_dev_release+0x18a/0x1d0 age=85 cpu=0 pid=2008 [ 299.282482] __slab_free+0x3c/0x2a1 [ 299.282510] kfree+0x296/0x310 [ 299.282536] scsi_host_dev_release+0x18a/0x1d0 [ 299.282574] device_release+0x74/0x100 [ 299.282606] kobject_release+0xc7/0x2a0 [ 299.282637] kobject_put+0x54/0xa0 [ 299.282668] put_device+0x27/0x40 [ 299.282694] scsi_host_put+0x1d/0x30 [ 299.282723] do_scan_async+0x1fc/0x2b0 [ 299.282753] kthread+0xdf/0xf0 [ 299.282782] kernel_thread_helper+0x4/0x10 [ 299.282817] INFO: Slab 0xffffea00015b0c00 objects=7 used=7 fp=0x (null) flags=0x100000000004080 [ 299.282882] INFO: Object 0xffff880056c30000 @offset=0 fp=0x (null) [ 299.282884] ... Signed-off-by: Huajun Li Cc: stable@kernel.org Acked-by: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 89da43f73c0..29c4c048097 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1815,6 +1815,7 @@ static void scsi_finish_async_scan(struct async_scan_data *data) } spin_unlock(&async_scan_lock); + scsi_autopm_put_host(shost); scsi_host_put(shost); kfree(data); } @@ -1841,7 +1842,6 @@ static int do_scan_async(void *_data) do_scsi_scan_host(shost); scsi_finish_async_scan(data); - scsi_autopm_put_host(shost); return 0; } @@ -1869,7 +1869,7 @@ void scsi_scan_host(struct Scsi_Host *shost) p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no); if (IS_ERR(p)) do_scan_async(data); - /* scsi_autopm_put_host(shost) is called in do_scan_async() */ + /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */ } EXPORT_SYMBOL(scsi_scan_host); -- cgit v1.2.3-70-g09d2 From fea6d607e154cf96ab22254ccb48addfd43d4cb5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 17 Feb 2012 16:25:08 -0500 Subject: [SCSI] scsi_pm: Fix bug in the SCSI power management handler This patch (as1520) fixes a bug in the SCSI layer's power management implementation. LUN scanning can be carried out asynchronously in do_scan_async(), and sd uses an asynchronous thread for the time-consuming parts of disk probing in sd_probe_async(). Currently nothing coordinates these async threads with system sleep transitions; they can and do attempt to continue scanning/probing SCSI devices even after the host adapter has been suspended. As one might expect, the outcome is not ideal. This is what the "prepare" stage of system suspend was created for. After the prepare callback has been called for a host, target, or device, drivers are not allowed to register any children underneath them. Currently the SCSI prepare callback is not implemented; this patch rectifies that omission. For SCSI hosts, the prepare routine calls scsi_complete_async_scans() to wait until async scanning is finished. It might be slightly more efficient to wait only until the host in question has been scanned, but there's currently no way to do that. Besides, during a sleep transition we will ultimately have to wait until all the host scanning has finished anyway. For SCSI devices, the prepare routine calls async_synchronize_full() to wait until sd probing is finished. The routine does nothing for SCSI targets, because asynchronous target scanning is done only as part of host scanning. Signed-off-by: Alan Stern CC: Signed-off-by: James Bottomley --- drivers/scsi/scsi_pm.c | 16 ++++++++++++++++ drivers/scsi/scsi_priv.h | 1 + 2 files changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index bf8bf79e6a1..c4670642d02 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -7,6 +7,7 @@ #include #include +#include #include #include @@ -92,6 +93,19 @@ static int scsi_bus_resume_common(struct device *dev) return err; } +static int scsi_bus_prepare(struct device *dev) +{ + if (scsi_is_sdev_device(dev)) { + /* sd probing uses async_schedule. Wait until it finishes. */ + async_synchronize_full(); + + } else if (scsi_is_host_device(dev)) { + /* Wait until async scanning is finished */ + scsi_complete_async_scans(); + } + return 0; +} + static int scsi_bus_suspend(struct device *dev) { return scsi_bus_suspend_common(dev, PMSG_SUSPEND); @@ -110,6 +124,7 @@ static int scsi_bus_poweroff(struct device *dev) #else /* CONFIG_PM_SLEEP */ #define scsi_bus_resume_common NULL +#define scsi_bus_prepare NULL #define scsi_bus_suspend NULL #define scsi_bus_freeze NULL #define scsi_bus_poweroff NULL @@ -218,6 +233,7 @@ void scsi_autopm_put_host(struct Scsi_Host *shost) #endif /* CONFIG_PM_RUNTIME */ const struct dev_pm_ops scsi_bus_pm_ops = { + .prepare = scsi_bus_prepare, .suspend = scsi_bus_suspend, .resume = scsi_bus_resume_common, .freeze = scsi_bus_freeze, diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 68eadd1c67f..be4fa6d179b 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -109,6 +109,7 @@ extern void scsi_exit_procfs(void); #endif /* CONFIG_PROC_FS */ /* scsi_scan.c */ +extern int scsi_complete_async_scans(void); extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int, unsigned int, unsigned int, int); extern void scsi_forget_host(struct Scsi_Host *); -- cgit v1.2.3-70-g09d2 From 11aad99af6ef629ff3b05d1c9f0936589b204316 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Feb 2012 20:43:11 +0000 Subject: atl1c: dont use highprio tx queue This driver attempts to use two TX rings but lacks proper support : 1) IRQ handler only takes care of TX completion on first TX ring 2) the stop/start logic uses the legacy functions (for non multiqueue drivers) This means all packets witk skb mark set to 1 are sent through high queue but are never cleaned and queue eventualy fills and block the device, triggering the infamous "NETDEV WATCHDOG" message. Lets use a single TX ring to fix the problem, this driver is not a real multiqueue one yet. Minimal fix for stable kernels. Reported-by: Thomas Meyer Tested-by: Thomas Meyer Signed-off-by: Eric Dumazet Cc: Jay Cliburn Cc: Chris Snook Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index b8591246eb4..1ff3c6df35a 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb, dev_info(&adapter->pdev->dev, "tx locked\n"); return NETDEV_TX_LOCKED; } - if (skb->mark == 0x01) - type = atl1c_trans_high; - else - type = atl1c_trans_normal; if (atl1c_tpd_avail(adapter, type) < tpd_req) { /* no enough descriptor, just stop queue */ -- cgit v1.2.3-70-g09d2 From b203262de63c56393d09e254242b57c002d8619d Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 16 Feb 2012 01:48:56 +0000 Subject: vmxnet3: cap copy length at size of skb to prevent dropped frames on tx I was recently shown that vmxnet3 devices on transmit, will drop very small udp frames consistently. This is due to a regression introduced by commit 39d4a96fd7d2926e46151adbd18b810aeeea8ec0. This commit attempts to introduce an optimization to the tx path, indicating that the underlying hardware behaves optimally when at least 54 bytes of header data are available for direct access. This causes problems however, if the entire frame is less than 54 bytes long. The subsequent pskb_may_pull in vmxnet3_parse_and_copy_hdr fails, causing an error return code, which leads to vmxnet3_tq_xmit dropping the frame. Fix it by placing a cap on the copy length. For frames longer than 54 bytes, we do the pull as we normally would. If the frame is shorter than that, copy the whole frame, but no more. This ensures that we still get the optimization for qualifying frames, but don't do any damange for frames that are too short. Also, since I'm unable to do this, it wuold be great if vmware could follow up this patch with some additional code commentary as to why 54 bytes is an optimal pull length for a virtual NIC driver. The comment that introduced this was vague on that. Thanks! Signed-off-by: Neil Horman Reported-by: Max Matveev CC: Max Matveev CC: "David S. Miller" CC: Shreyas Bhatewara CC: "VMware, Inc." Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index de7fc345148..3dcd3857a36 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -843,8 +843,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, /* for simplicity, don't copy L4 headers */ ctx->l4_hdr_size = 0; } - ctx->copy_size = ctx->eth_ip_hdr_size + - ctx->l4_hdr_size; + ctx->copy_size = min(ctx->eth_ip_hdr_size + + ctx->l4_hdr_size, skb->len); } else { ctx->eth_ip_hdr_size = 0; ctx->l4_hdr_size = 0; -- cgit v1.2.3-70-g09d2 From 32aa64f77e032511079fec5ec0465aeb6d6c3891 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 16 Feb 2012 20:44:33 +0000 Subject: net/ethernet: ks8851_mll: signedness bug in ks8851_probe() netdev->irq is unsigned, so it's never less than zero. Signed-off-by: Dan Carpenter Tested-by: Jan Weitzel Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851_mll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c index 231176fcd2b..2784bc706f1 100644 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ b/drivers/net/ethernet/micrel/ks8851_mll.c @@ -1545,7 +1545,7 @@ static int __devinit ks8851_probe(struct platform_device *pdev) netdev->irq = platform_get_irq(pdev, 0); - if (netdev->irq < 0) { + if ((int)netdev->irq < 0) { err = netdev->irq; goto err_get_irq; } -- cgit v1.2.3-70-g09d2 From 8ae0cfee2a727f698bda12e530f4879a9793c6c9 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Feb 2012 09:43:32 +0000 Subject: drivers/atm/solos-pci.c: exchange pci_iounmaps The calls to pci_iounmap are in the wrong order, as compared to the associated calls to pci_iomap. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e,x; statement S,S1; int ret; @@ e = pci_iomap(x,...) ... when != pci_iounmap(x,e) if (<+...e...+>) S ... when any when != pci_iounmap(x,e) *if (...) { ... when != pci_iounmap(x,e) return ...; } ... when any pci_iounmap(x,e); // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/atm/solos-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 5d1d0764513..e8cd652d201 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -1206,9 +1206,9 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) out_unmap_both: pci_set_drvdata(dev, NULL); - pci_iounmap(dev, card->config_regs); - out_unmap_config: pci_iounmap(dev, card->buffers); + out_unmap_config: + pci_iounmap(dev, card->config_regs); out_release_regions: pci_release_regions(dev); out: -- cgit v1.2.3-70-g09d2 From 64f0a836f600e9c31ffd511713ab5d328aa96ac8 Mon Sep 17 00:00:00 2001 From: Nikola Pajkovsky Date: Sun, 19 Feb 2012 10:47:43 +0000 Subject: b44: remove __exit from b44_pci_exit() WARNING: drivers/net/ethernet/broadcom/built-in.o(.init.text+0x5d): Section mismatch in reference from the function b44_init() to the function .exit.text:b44_pci_exit() module exits with b44_cleanup() Signed-off-by: Nikola Pajkovsky Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/b44.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c index 3fb66d09ece..cab87456a34 100644 --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2339,7 +2339,7 @@ static inline int __init b44_pci_init(void) return err; } -static inline void __exit b44_pci_exit(void) +static inline void b44_pci_exit(void) { #ifdef CONFIG_B44_PCI ssb_pcihost_unregister(&b44_pci_driver); -- cgit v1.2.3-70-g09d2 From a7762b10c12a70c5dbf2253142764b728ac88c3a Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 15 Feb 2012 17:51:56 +0100 Subject: can: sja1000: fix isr hang when hw is unplugged under load In the case of hotplug enabled devices (PCMCIA/PCIeC) the removal of the hardware can cause an infinite loop in the common sja1000 isr. Use the already retrieved status register to indicate a possible hardware removal and double check by reading the mode register in sja1000_is_absent. Cc: stable@kernel.org [3.2+] Signed-off-by: Oliver Hartkopp Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/sja1000.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c index 04a3f1b756a..192b0d118df 100644 --- a/drivers/net/can/sja1000/sja1000.c +++ b/drivers/net/can/sja1000/sja1000.c @@ -95,11 +95,16 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val) spin_unlock_irqrestore(&priv->cmdreg_lock, flags); } +static int sja1000_is_absent(struct sja1000_priv *priv) +{ + return (priv->read_reg(priv, REG_MOD) == 0xFF); +} + static int sja1000_probe_chip(struct net_device *dev) { struct sja1000_priv *priv = netdev_priv(dev); - if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) { + if (priv->reg_base && sja1000_is_absent(priv)) { printk(KERN_INFO "%s: probing @0x%lX failed\n", DRV_NAME, dev->base_addr); return 0; @@ -493,6 +498,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) { n++; status = priv->read_reg(priv, REG_SR); + /* check for absent controller due to hw unplug */ + if (status == 0xFF && sja1000_is_absent(priv)) + return IRQ_NONE; if (isrc & IRQ_WUI) dev_warn(dev->dev.parent, "wakeup interrupt\n"); @@ -509,6 +517,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id) while (status & SR_RBS) { sja1000_rx(dev); status = priv->read_reg(priv, REG_SR); + /* check for absent controller */ + if (status == 0xFF && sja1000_is_absent(priv)) + return IRQ_NONE; } } if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) { -- cgit v1.2.3-70-g09d2 From 3d7474734b220ccbf9997ea484d0bcd4f7ab8549 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Sun, 19 Feb 2012 21:38:52 +0000 Subject: mlx4_core: Do not map BF area if capability is 0 BF can be disabled in some cases, the capability field, bf_reg_size is set to zero in this case. Don't map the BF area in this case, it would cause failures. In addition, leaving the BF area unmapped also alerts the ETH driver to not use BF. Signed-off-by: Jack Morgenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 678558b502f..9c5fbad513f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -986,6 +986,9 @@ static int map_bf_area(struct mlx4_dev *dev) resource_size_t bf_len; int err = 0; + if (!dev->caps.bf_reg_size) + return -ENXIO; + bf_start = pci_resource_start(dev->pdev, 2) + (dev->caps.num_uars << PAGE_SHIFT); bf_len = pci_resource_len(dev->pdev, 2) - -- cgit v1.2.3-70-g09d2 From 15103aa7a033d7d671c75cc3a71d772dbcbae61e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 20 Feb 2012 17:28:13 +0000 Subject: zaurus: Add ID for C-750/C-760/C-860/SL-C3000 PDA in MDLM mode In 16adf5d07987d93675945f3cecf0e33706566005 I removed an over-broad alias that caused zaurus.ko to bind to unrelated devices. I had a report that at least one valid case no longer auto-loads because of this. This patch adds an ID for that case. Reported-by: Raphael Wimmer Signed-off-by: Dave Jones Signed-off-by: David S. Miller --- drivers/net/usb/zaurus.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index f701d412708..ed2caed086f 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -315,6 +315,11 @@ static const struct usb_device_id products [] = { .idProduct = 0x9031, /* C-750 C-760 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, +}, { + /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */ + USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &bogus_mdlm_info, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, -- cgit v1.2.3-70-g09d2 From 730c41d5ba583a9608300fc4e6cf236957cfe02a Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 21 Feb 2012 03:39:32 +0000 Subject: mlx4: Replacing pool_lock with mutex Under the spinlock we call request_irq(), which allocates memory with GFP_KERNEL, This causes the following trace when DEBUG_SPINLOCK is enabled, it can cause the following trace: BUG: spinlock wrong CPU on CPU#2, ethtool/2595 lock: ffff8801f9cbc2b0, .magic: dead4ead, .owner: ethtool/2595, .owner_cpu: 0 Pid: 2595, comm: ethtool Not tainted 3.0.18 #2 Call Trace: spin_bug+0xa2/0xf0 do_raw_spin_unlock+0x71/0xa0 _raw_spin_unlock+0xe/0x10 mlx4_assign_eq+0x12b/0x190 [mlx4_core] mlx4_en_activate_cq+0x252/0x2d0 [mlx4_en] ? mlx4_en_activate_rx_rings+0x227/0x370 [mlx4_en] mlx4_en_start_port+0x189/0xb90 [mlx4_en] mlx4_en_set_ringparam+0x29a/0x340 [mlx4_en] dev_ethtool+0x816/0xb10 ? dev_get_by_name_rcu+0xa4/0xe0 dev_ioctl+0x2b5/0x470 handle_mm_fault+0x1cd/0x2d0 sock_do_ioctl+0x5d/0x70 sock_ioctl+0x79/0x2f0 do_vfs_ioctl+0x8c/0x340 sys_ioctl+0xa1/0xb0 system_call_fastpath+0x16/0x1b Replacing with mutex, which is enough in this case. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 8fa41f3082c..9129ace0256 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1036,7 +1036,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector) struct mlx4_priv *priv = mlx4_priv(dev); int vec = 0, err = 0, i; - spin_lock(&priv->msix_ctl.pool_lock); + mutex_lock(&priv->msix_ctl.pool_lock); for (i = 0; !vec && i < dev->caps.comp_pool; i++) { if (~priv->msix_ctl.pool_bm & 1ULL << i) { priv->msix_ctl.pool_bm |= 1ULL << i; @@ -1058,7 +1058,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector) eq_set_ci(&priv->eq_table.eq[vec], 1); } } - spin_unlock(&priv->msix_ctl.pool_lock); + mutex_unlock(&priv->msix_ctl.pool_lock); if (vec) { *vector = vec; @@ -1079,13 +1079,13 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec) if (likely(i >= 0)) { /*sanity check , making sure were not trying to free irq's Belonging to a legacy EQ*/ - spin_lock(&priv->msix_ctl.pool_lock); + mutex_lock(&priv->msix_ctl.pool_lock); if (priv->msix_ctl.pool_bm & 1ULL << i) { free_irq(priv->eq_table.eq[vec].irq, &priv->eq_table.eq[vec]); priv->msix_ctl.pool_bm &= ~(1ULL << i); } - spin_unlock(&priv->msix_ctl.pool_lock); + mutex_unlock(&priv->msix_ctl.pool_lock); } } diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 9c5fbad513f..5c655a2a380 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1828,7 +1828,7 @@ slave_start: goto err_master_mfunc; priv->msix_ctl.pool_bm = 0; - spin_lock_init(&priv->msix_ctl.pool_lock); + mutex_init(&priv->msix_ctl.pool_lock); mlx4_enable_msi_x(dev); if ((mlx4_is_mfunc(dev)) && diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index c92269f8c05..28f8251561f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -697,7 +697,7 @@ struct mlx4_sense { struct mlx4_msix_ctl { u64 pool_bm; - spinlock_t pool_lock; + struct mutex pool_lock; }; struct mlx4_steer { -- cgit v1.2.3-70-g09d2 From 3d8f93083be54696d3b7f8e8c6c70d411d01f9e8 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 21 Feb 2012 03:41:07 +0000 Subject: mlx4: Setting new port types after all interfaces unregistered In port type change flow, need to set the new port types only after all interfaces have finished the unregister process. Otherwise, during unregister, one of the interfaces might issue a SET_PORT command with wrong port types, it can cause bad FW behavior. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 5c655a2a380..32f8799db19 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev, for (port = 0; port < dev->caps.num_ports; port++) { /* Change the port type only if the new type is different * from the current, and not set to Auto */ - if (port_types[port] != dev->caps.port_type[port + 1]) { + if (port_types[port] != dev->caps.port_type[port + 1]) change = 1; - dev->caps.port_type[port + 1] = port_types[port]; - } } if (change) { mlx4_unregister_device(dev); for (port = 1; port <= dev->caps.num_ports; port++) { mlx4_CLOSE_PORT(dev, port); + dev->caps.port_type[port + 1] = port_types[port]; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, " -- cgit v1.2.3-70-g09d2 From b63d97a36edb1aecf8c13e5f5783feff4d64c24b Mon Sep 17 00:00:00 2001 From: Chris D Schimp Date: Mon, 20 Feb 2012 16:59:24 -0500 Subject: hwmon: (max6639) Fix FAN_FROM_REG calculation RPM calculation from tachometer value does not depend on PPR. Also, do not report negative RPM values. Signed-off-by: Chris D Schimp [guenter.roeck@ericsson.com: do not report negative RPM values] Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Acked-by: Roland Stigge --- drivers/hwmon/max6639.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index e10a092c603..13e58a1992c 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -72,8 +72,8 @@ static unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END }; static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 }; -#define FAN_FROM_REG(val, div, rpm_range) ((val) == 0 ? -1 : \ - (val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val))) +#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \ + 0 : (rpm_ranges[rpm_range] * 30) / (val)) #define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) / 1000, 0, 255) /* @@ -333,7 +333,7 @@ static ssize_t show_fan_input(struct device *dev, return PTR_ERR(data); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index], - data->ppr, data->rpm_range)); + data->rpm_range)); } static ssize_t show_alarm(struct device *dev, -- cgit v1.2.3-70-g09d2 From 2f2da1ac0ba5b6cc6e1957c4da5ff20e67d8442b Mon Sep 17 00:00:00 2001 From: Chris D Schimp Date: Mon, 20 Feb 2012 17:44:59 -0500 Subject: hwmon: (max6639) Fix PPR register initialization to set both channels Initialize PPR register for both channels, and set correct PPR register bits. Also remove unnecessary variable initializations. Signed-off-by: Chris D Schimp [guenter.roeck@ericsson.com: Merged two patches into one] Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Acked-by: Roland Stigge --- drivers/hwmon/max6639.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index 13e58a1992c..a6760bacd91 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -429,9 +429,9 @@ static int max6639_init_client(struct i2c_client *client) struct max6639_data *data = i2c_get_clientdata(client); struct max6639_platform_data *max6639_info = client->dev.platform_data; - int i = 0; + int i; int rpm_range = 1; /* default: 4000 RPM */ - int err = 0; + int err; /* Reset chip to default values, see below for GCONFIG setup */ err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG, @@ -446,11 +446,6 @@ static int max6639_init_client(struct i2c_client *client) else data->ppr = 2; data->ppr -= 1; - err = i2c_smbus_write_byte_data(client, - MAX6639_REG_FAN_PPR(i), - data->ppr << 5); - if (err) - goto exit; if (max6639_info) rpm_range = rpm_range_to_reg(max6639_info->rpm_range); @@ -458,6 +453,13 @@ static int max6639_init_client(struct i2c_client *client) for (i = 0; i < 2; i++) { + /* Set Fan pulse per revolution */ + err = i2c_smbus_write_byte_data(client, + MAX6639_REG_FAN_PPR(i), + data->ppr << 6); + if (err) + goto exit; + /* Fans config PWM, RPM */ err = i2c_smbus_write_byte_data(client, MAX6639_REG_FAN_CONFIG1(i), -- cgit v1.2.3-70-g09d2 From cab928ee1f221c9cc48d6615070fefe2e444384a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 7 Feb 2012 15:11:46 -0800 Subject: USB: Fix handoff when BIOS disables host PCI device. On some systems with an Intel Panther Point xHCI host controller, the BIOS disables the xHCI PCI device during boot, and switches the xHCI ports over to EHCI. This allows the BIOS to access USB devices without having xHCI support. The downside is that the xHCI BIOS handoff mechanism will fail because memory mapped I/O is not enabled for the disabled PCI device. Jesse Barnes says this is expected behavior. The PCI core will enable BARs before quirks run, but it will leave it in an undefined state, and it may not have memory mapped I/O enabled. Make the generic USB quirk handler call pci_enable_device() to re-enable MMIO, and call pci_disable_device() once the host-specific BIOS handoff is finished. This will balance the ref counts in the PCI core. When the PCI probe function is called, usb_hcd_pci_probe() will call pci_enable_device() again. This should be back ported to kernels as old as 2.6.31. That was the first kernel with xHCI support, and no one has complained about BIOS handoffs failing due to memory mapped I/O being disabled on other hosts (EHCI, UHCI, or OHCI). Signed-off-by: Sarah Sharp Acked-by: Oliver Neukum Cc: Jesse Barnes Cc: stable@vger.kernel.org --- drivers/usb/host/pci-quirks.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index ac53a662a6a..7732d69e49e 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -872,7 +872,17 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && + pdev->class != PCI_CLASS_SERIAL_USB_OHCI && + pdev->class != PCI_CLASS_SERIAL_USB_EHCI && + pdev->class != PCI_CLASS_SERIAL_USB_XHCI) + return; + if (pci_enable_device(pdev) < 0) { + dev_warn(&pdev->dev, "Can't enable PCI device, " + "BIOS handoff failed.\n"); + return; + } if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI) quirk_usb_handoff_uhci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI) @@ -881,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) quirk_usb_disable_ehci(pdev); else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); + pci_disable_device(pdev); } DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); -- cgit v1.2.3-70-g09d2 From a45aa3b30583e7d54e7cf4fbcd0aa699348a6e5c Mon Sep 17 00:00:00 2001 From: Elric Fu Date: Sat, 18 Feb 2012 13:32:27 +0800 Subject: USB: Set hub depth after USB3 hub reset The superspeed device attached to a USB 3.0 hub(such as VIA's) doesn't respond the address device command after resume. The root cause is the superspeed hub will miss the Hub Depth value that is used as an offset into the route string to locate the bits it uses to determine the downstream port number after reset, and all packets can't be routed to the device attached to the superspeed hub. Hub driver sends a Set Hub Depth request to the superspeed hub except for USB 3.0 root hub when the hub is initialized and doesn't send the request again after reset due to the resume process. So moving the code that sends the Set Hub Depth request to the superspeed hub from hub_configure() to hub_activate() is to cover those situations include initialization and reset. The patch should be backported to kernels as old as 2.6.39. Signed-off-by: Elric Fu Signed-off-by: Sarah Sharp Acked-by: Alan Stern Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a0613d8f9be..265c2f675d0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (type == HUB_INIT3) goto init3; - /* After a resume, port power should still be on. + /* The superspeed hub except for root hub has to use Hub Depth + * value as an offset into the route string to locate the bits + * it uses to determine the downstream port number. So hub driver + * should send a set hub depth request to superspeed hub after + * the superspeed hub is set configuration in initialization or + * reset procedure. + * + * After a resume, port power should still be on. * For any other type of activation, turn it on. */ if (type != HUB_RESUME) { + if (hdev->parent && hub_is_superspeed(hdev)) { + ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_SET_DEPTH, USB_RT_HUB, + hdev->level - 1, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (ret < 0) + dev_err(hub->intfdev, + "set hub depth failed\n"); + } /* Speed up system boot by using a delayed_work for the * hub's initial power-up delays. This is pretty awkward @@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub, goto fail; } - if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) { - ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), - HUB_SET_DEPTH, USB_RT_HUB, - hdev->level - 1, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - - if (ret < 0) { - message = "can't set hub depth"; - goto fail; - } - } - /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, * but the hub can/will return fewer bytes here. -- cgit v1.2.3-70-g09d2 From 340a3504fd39dad753ba908fb6f894ee81fc3ae2 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 13 Feb 2012 14:42:11 -0800 Subject: xhci: Fix encoding for HS bulk/control NAK rate. The xHCI 0.96 spec says that HS bulk and control endpoint NAK rate must be encoded as an exponent of two number of microframes. The endpoint descriptor has the NAK rate encoded in number of microframes. We were just copying the value from the endpoint descriptor into the endpoint context interval field, which was not correct. This lead to the VIA host rejecting the add of a bulk OUT endpoint from any USB 2.0 mass storage device. The fix is to use the correct encoding. Refactor the code to convert number of frames to an exponential number of microframes, and make sure we convert the number of microframes in HS bulk and control endpoints to an exponent. This should be back ported to kernels as old as 2.6.31, that contain the commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval" Signed-off-by: Sarah Sharp Tested-by: Felipe Contreras Suggested-by: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 36cbe2226a4..383fc857491 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, } /* - * Convert bInterval expressed in frames (in 1-255 range) to exponent of + * Convert bInterval expressed in microframes (in 1-255 range) to exponent of * microframes, rounded down to nearest power of 2. */ -static unsigned int xhci_parse_frame_interval(struct usb_device *udev, - struct usb_host_endpoint *ep) +static unsigned int xhci_microframes_to_exponent(struct usb_device *udev, + struct usb_host_endpoint *ep, unsigned int desc_interval, + unsigned int min_exponent, unsigned int max_exponent) { unsigned int interval; - interval = fls(8 * ep->desc.bInterval) - 1; - interval = clamp_val(interval, 3, 10); - if ((1 << interval) != 8 * ep->desc.bInterval) + interval = fls(desc_interval) - 1; + interval = clamp_val(interval, min_exponent, max_exponent); + if ((1 << interval) != desc_interval) dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n", ep->desc.bEndpointAddress, 1 << interval, - 8 * ep->desc.bInterval); + desc_interval); return interval; } +static unsigned int xhci_parse_microframe_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval, 0, 15); +} + + +static unsigned int xhci_parse_frame_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval * 8, 3, 10); +} + /* Return the polling or NAK interval. * * The polling interval is expressed in "microframes". If xHCI's Interval field @@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, /* Max NAK rate */ if (usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_bulk(&ep->desc)) { - interval = ep->desc.bInterval; + interval = xhci_parse_microframe_interval(udev, ep); break; } /* Fall through - SS and HS isoc/int have same decoding */ -- cgit v1.2.3-70-g09d2 From bb94a406682770a35305daaa241ccdb7cab399de Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 21 Feb 2012 13:16:32 -0500 Subject: usb-storage: fix freezing of the scanning thread This patch (as1521b) fixes the interaction between usb-storage's scanning thread and the freezer. The current implementation has a race: If the device is unplugged shortly after being plugged in and just as a system sleep begins, the scanning thread may get frozen before the khubd task. Khubd won't be able to freeze until the disconnect processing is complete, and the disconnect processing can't proceed until the scanning thread finishes, so the sleep transition will fail. The implementation in the 3.2 kernel suffers from an additional problem. There the scanning thread calls set_freezable_with_signal(), and the signals sent by the freezer will mess up the thread's I/O delays, which are all interruptible. The solution to both problems is the same: Replace the kernel thread used for scanning with a delayed-work routine on the system freezable work queue. Freezable work queues have the nice property that you can cancel a work item even while the work queue is frozen, and no signals are needed. The 3.2 version of this patch solves the problem in Bugzilla #42730. Signed-off-by: Alan Stern Acked-by: Seth Forshee CC: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 90 ++++++++++++++++------------------------------- drivers/usb/storage/usb.h | 7 ++-- 2 files changed, 35 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 3dd7da9fd50..db51ba16dc0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us) struct Scsi_Host *host = us_to_host(us); /* If the device is really gone, cut short reset delays */ - if (us->pusb_dev->state == USB_STATE_NOTATTACHED) + if (us->pusb_dev->state == USB_STATE_NOTATTACHED) { set_bit(US_FLIDX_DISCONNECTING, &us->dflags); + wake_up(&us->delay_wait); + } - /* Prevent SCSI-scanning (if it hasn't started yet) - * and wait for the SCSI-scanning thread to stop. + /* Prevent SCSI scanning (if it hasn't started yet) + * or wait for the SCSI-scanning routine to stop. */ - set_bit(US_FLIDX_DONT_SCAN, &us->dflags); - wake_up(&us->delay_wait); - wait_for_completion(&us->scanning_done); + cancel_delayed_work_sync(&us->scan_dwork); + + /* Balance autopm calls if scanning was cancelled */ + if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags)) + usb_autopm_put_interface_no_suspend(us->pusb_intf); /* Removing the host will perform an orderly shutdown: caches * synchronized, disks spun down, etc. @@ -823,53 +827,28 @@ static void release_everything(struct us_data *us) scsi_host_put(us_to_host(us)); } -/* Thread to carry out delayed SCSI-device scanning */ -static int usb_stor_scan_thread(void * __us) +/* Delayed-work routine to carry out SCSI-device scanning */ +static void usb_stor_scan_dwork(struct work_struct *work) { - struct us_data *us = (struct us_data *)__us; + struct us_data *us = container_of(work, struct us_data, + scan_dwork.work); struct device *dev = &us->pusb_intf->dev; - dev_dbg(dev, "device found\n"); - - set_freezable(); + dev_dbg(dev, "starting scan\n"); - /* - * Wait for the timeout to expire or for a disconnect - * - * We can't freeze in this thread or we risk causing khubd to - * fail to freeze, but we can't be non-freezable either. Nor can - * khubd freeze while waiting for scanning to complete as it may - * hold the device lock, causing a hang when suspending devices. - * So instead of using wait_event_freezable(), explicitly test - * for (DONT_SCAN || freezing) in interruptible wait and proceed - * if any of DONT_SCAN, freezing or timeout has happened. - */ - if (delay_use > 0) { - dev_dbg(dev, "waiting for device to settle " - "before scanning\n"); - wait_event_interruptible_timeout(us->delay_wait, - test_bit(US_FLIDX_DONT_SCAN, &us->dflags) || - freezing(current), delay_use * HZ); + /* For bulk-only devices, determine the max LUN value */ + if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) { + mutex_lock(&us->dev_mutex); + us->max_lun = usb_stor_Bulk_max_lun(us); + mutex_unlock(&us->dev_mutex); } + scsi_scan_host(us_to_host(us)); + dev_dbg(dev, "scan complete\n"); - /* If the device is still connected, perform the scanning */ - if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) { - - /* For bulk-only devices, determine the max LUN value */ - if (us->protocol == USB_PR_BULK && - !(us->fflags & US_FL_SINGLE_LUN)) { - mutex_lock(&us->dev_mutex); - us->max_lun = usb_stor_Bulk_max_lun(us); - mutex_unlock(&us->dev_mutex); - } - scsi_scan_host(us_to_host(us)); - dev_dbg(dev, "scan complete\n"); - - /* Should we unbind if no devices were detected? */ - } + /* Should we unbind if no devices were detected? */ usb_autopm_put_interface(us->pusb_intf); - complete_and_exit(&us->scanning_done, 0); + clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags); } static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) @@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus, init_completion(&us->cmnd_ready); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); - init_completion(&us->scanning_done); + INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork); /* Associate the us_data structure with the USB device */ result = associate_dev(us, intf); @@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1); /* Second part of general USB mass-storage probing */ int usb_stor_probe2(struct us_data *us) { - struct task_struct *th; int result; struct device *dev = &us->pusb_intf->dev; @@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us) goto BadDevice; } - /* Start up the thread for delayed SCSI-device scanning */ - th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan"); - if (IS_ERR(th)) { - dev_warn(dev, - "Unable to start the device-scanning thread\n"); - complete(&us->scanning_done); - quiesce_and_remove_host(us); - result = PTR_ERR(th); - goto BadDevice; - } - + /* Submit the delayed_work for SCSI-device scanning */ usb_autopm_get_interface_no_resume(us->pusb_intf); - wake_up_process(th); + set_bit(US_FLIDX_SCAN_PENDING, &us->dflags); + if (delay_use > 0) + dev_dbg(dev, "waiting for device to settle before scanning\n"); + queue_delayed_work(system_freezable_wq, &us->scan_dwork, + delay_use * HZ); return 0; /* We come here if there are any problems */ diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 7b0f2113632..75f70f04f37 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -47,6 +47,7 @@ #include #include #include +#include #include struct us_data; @@ -72,7 +73,7 @@ struct us_unusual_dev { #define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */ #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ -#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ +#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */ #define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ #define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ @@ -147,8 +148,8 @@ struct us_data { /* mutual exclusion and synchronization structures */ struct completion cmnd_ready; /* to sleep thread on */ struct completion notify; /* thread begin/end */ - wait_queue_head_t delay_wait; /* wait during scan, reset */ - struct completion scanning_done; /* wait for scan thread */ + wait_queue_head_t delay_wait; /* wait during reset */ + struct delayed_work scan_dwork; /* for async scanning */ /* subdriver information */ void *extra; /* Any extra data */ -- cgit v1.2.3-70-g09d2 From 7fd25702ba616d9ba56e2a625472f29e5aff25ee Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 20 Feb 2012 09:31:57 +0100 Subject: USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable id This USB-serial cable with mini stereo jack enumerates as: Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care It is a TI3410 inside. Signed-off-by: Andrew Lunn Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 6 ++++-- drivers/usb/serial/ti_usb_3410_5052.h | 4 ++++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 8468eb769a2..75b838eff17 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -165,7 +165,7 @@ static unsigned int product_5052_count; /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ -static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { @@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 2aac1953993..f140f1b9d5c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -49,6 +49,10 @@ #define MTS_MT9234ZBA_PRODUCT_ID 0xF115 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319 +/* Abbott Diabetics vendor and product ids */ +#define ABBOTT_VENDOR_ID 0x1a61 +#define ABBOTT_PRODUCT_ID 0x3410 + /* Commands */ #define TI_GET_VERSION 0x01 #define TI_GET_PORT_STATUS 0x02 -- cgit v1.2.3-70-g09d2 From c6c1e4491dc8d1ed2509fa6aacffa7f34614fc38 Mon Sep 17 00:00:00 2001 From: Bruno Thomsen Date: Tue, 21 Feb 2012 23:41:37 +0100 Subject: USB: Added Kamstrup VID/PIDs to cp210x serial driver. Signed-off-by: Bruno Thomsen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8dbf51a43c4..08a5575724c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -136,6 +136,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */ { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ + { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ + { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ -- cgit v1.2.3-70-g09d2 From 797a796a13df6b84a4791e57306737059b5b2384 Mon Sep 17 00:00:00 2001 From: Hitoshi Mitake Date: Tue, 7 Feb 2012 11:45:33 +0900 Subject: asm-generic: architecture independent readq/writeq for 32bit environment This provides unified readq()/writeq() helper functions for 32-bit drivers. For some cases, readq/writeq without atomicity is harmful, and order of io access has to be specified explicitly. So in this patch, new two header files which contain non-atomic readq/writeq are added. - provides non-atomic readq/ writeq with the order of lower address -> higher address - provides non-atomic readq/ writeq with reversed order This allows us to remove some readq()s that were added drivers when the default non-atomic ones were removed in commit dbee8a0affd5 ("x86: remove 32-bit versions of readq()/writeq()") The drivers which need readq/writeq but can do with the non-atomic ones must add the line: #include /* or hi-lo.h */ But this will be nop in 64-bit environments, and no other #ifdefs are required. So I believe that this patch can solve the problem of 1. driver-specific readq/writeq 2. atomicity and order of io access This patch is tested with building allyesconfig and allmodconfig as ARCH=x86 and ARCH=i386 on top of tip/master. Cc: Kashyap Desai Cc: Len Brown Cc: Ravi Anand Cc: Vikas Chaudhary Cc: Matthew Garrett Cc: Jason Uhlenkott Cc: James Bottomley Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Roland Dreier Cc: James Bottomley Cc: Alan Cox Cc: Matthew Wilcox Cc: Andrew Morton Signed-off-by: Hitoshi Mitake Signed-off-by: Linus Torvalds --- drivers/block/nvme.c | 2 ++ drivers/edac/i3200_edac.c | 15 ++------------- drivers/platform/x86/ibm_rtl.c | 15 ++------------- drivers/platform/x86/intel_ips.c | 15 ++------------- drivers/scsi/qla4xxx/ql4_nx.c | 23 ++--------------------- include/asm-generic/io-64-nonatomic-hi-lo.h | 28 ++++++++++++++++++++++++++++ include/asm-generic/io-64-nonatomic-lo-hi.h | 28 ++++++++++++++++++++++++++++ 7 files changed, 66 insertions(+), 60 deletions(-) create mode 100644 include/asm-generic/io-64-nonatomic-hi-lo.h create mode 100644 include/asm-generic/io-64-nonatomic-lo-hi.h (limited to 'drivers') diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c index c1dc4d86c22..1f3c1a7d132 100644 --- a/drivers/block/nvme.c +++ b/drivers/block/nvme.c @@ -41,6 +41,8 @@ #include #include +#include + #define NVME_Q_DEPTH 1024 #define SQ_SIZE(depth) (depth * sizeof(struct nvme_command)) #define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion)) diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c index aa08497a075..73f55e2008c 100644 --- a/drivers/edac/i3200_edac.c +++ b/drivers/edac/i3200_edac.c @@ -15,6 +15,8 @@ #include #include "edac_core.h" +#include + #define I3200_REVISION "1.1" #define EDAC_MOD_STR "i3200_edac" @@ -101,19 +103,6 @@ struct i3200_priv { static int nr_channels; -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - static int how_many_channels(struct pci_dev *pdev) { unsigned char capid0_8b; /* 8th byte of CAPID0 */ diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 42a7d603c87..7481146a5b4 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -33,6 +33,8 @@ #include #include +#include + static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); @@ -83,19 +85,6 @@ static void __iomem *rtl_cmd_addr; static u8 rtl_cmd_type; static u8 rtl_cmd_width; -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len) { if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 809a3ae943c..88a98cff5a4 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -77,6 +77,8 @@ #include #include "intel_ips.h" +#include + #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32 /* @@ -344,19 +346,6 @@ struct ips_driver { static bool ips_gpu_turbo_enabled(struct ips_driver *ips); -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - /** * ips_cpu_busy - is CPU busy? * @ips: IPS driver struct diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 78f1111158d..65253dfbe96 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -10,6 +10,8 @@ #include "ql4_def.h" #include "ql4_glbl.h" +#include + #define MASK(n) DMA_BIT_MASK(n) #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff)) #define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff)) @@ -655,27 +657,6 @@ static int qla4_8xxx_pci_is_same_window(struct scsi_qla_host *ha, return 0; } -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - -#ifndef writeq -static inline void writeq(__u64 val, volatile void __iomem *addr) -{ - writel(val, addr); - writel(val >> 32, addr+4); -} -#endif - static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha, u64 off, void *data, int size) { diff --git a/include/asm-generic/io-64-nonatomic-hi-lo.h b/include/asm-generic/io-64-nonatomic-hi-lo.h new file mode 100644 index 00000000000..a6806a94250 --- /dev/null +++ b/include/asm-generic/io-64-nonatomic-hi-lo.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_ +#define _ASM_IO_64_NONATOMIC_HI_LO_H_ + +#include +#include + +#ifndef readq +static inline __u64 readq(const volatile void __iomem *addr) +{ + const volatile u32 __iomem *p = addr; + u32 low, high; + + high = readl(p + 1); + low = readl(p); + + return low + ((u64)high << 32); +} +#endif + +#ifndef writeq +static inline void writeq(__u64 val, volatile void __iomem *addr) +{ + writel(val >> 32, addr + 4); + writel(val, addr); +} +#endif + +#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */ diff --git a/include/asm-generic/io-64-nonatomic-lo-hi.h b/include/asm-generic/io-64-nonatomic-lo-hi.h new file mode 100644 index 00000000000..ca546b1ff8b --- /dev/null +++ b/include/asm-generic/io-64-nonatomic-lo-hi.h @@ -0,0 +1,28 @@ +#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_ +#define _ASM_IO_64_NONATOMIC_LO_HI_H_ + +#include +#include + +#ifndef readq +static inline __u64 readq(const volatile void __iomem *addr) +{ + const volatile u32 __iomem *p = addr; + u32 low, high; + + low = readl(p); + high = readl(p + 1); + + return low + ((u64)high << 32); +} +#endif + +#ifndef writeq +static inline void writeq(__u64 val, volatile void __iomem *addr) +{ + writel(val, addr); + writel(val >> 32, addr + 4); +} +#endif + +#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */ -- cgit v1.2.3-70-g09d2 From aa491ad3d4bf3c7994a419b3bb1c91b9b4fd2a8a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 22 Feb 2012 16:04:24 +1100 Subject: cpuidle: Default y on powerpc pSeries We moved all our pSeries idle loops to the cpu idle framework so we really want it to come up by default. Signed-off-by: Benjamin Herrenschmidt --- drivers/cpuidle/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index 7dbc4a83c45..78a666d1e5f 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -1,7 +1,7 @@ config CPU_IDLE bool "CPU idle PM support" - default ACPI + default y if ACPI || PPC_PSERIES help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform -- cgit v1.2.3-70-g09d2 From f0d14daa6906070ca044b86f483fdde7d81f5294 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Tue, 21 Feb 2012 17:39:15 +0100 Subject: drm/radeon: Only create additional ring debugfs files on Cayman or newer. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46274 Tested with a Cayman card in a Llano system: The additional files are created and working for the Cayman card but not created for the CPU's built-in GPU. Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ring.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index 30a4c5014c8..92c9ea4751f 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -500,8 +500,11 @@ static char radeon_debugfs_ib_names[RADEON_IB_POOL_SIZE][32]; int radeon_debugfs_ring_init(struct radeon_device *rdev) { #if defined(CONFIG_DEBUG_FS) - return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, - ARRAY_SIZE(radeon_debugfs_ring_info_list)); + if (rdev->family >= CHIP_CAYMAN) + return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, + ARRAY_SIZE(radeon_debugfs_ring_info_list)); + else + return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1); #else return 0; #endif -- cgit v1.2.3-70-g09d2 From 6b7746e8768e1c550b320d5af761f73e5aa37f76 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Mon, 20 Feb 2012 17:57:20 -0500 Subject: drm/radeon/kms: properly set accel working flag and bailout when false If accel is not working many subsystem such as the ib pool might not be initialized properly that can lead to segfault inside kernel when cs ioctl is call with non working acceleration. To avoid this make sure the accel working flag is false when an error in GPU startup happen and return EBUSY from cs ioctl if accel is not working. Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 1 + drivers/gpu/drm/radeon/ni.c | 1 + drivers/gpu/drm/radeon/r100.c | 8 +++++++- drivers/gpu/drm/radeon/r300.c | 8 +++++++- drivers/gpu/drm/radeon/r420.c | 8 +++++++- drivers/gpu/drm/radeon/r520.c | 8 +++++++- drivers/gpu/drm/radeon/r600.c | 1 + drivers/gpu/drm/radeon/radeon_cs.c | 4 ++++ drivers/gpu/drm/radeon/rs400.c | 8 +++++++- drivers/gpu/drm/radeon/rs600.c | 8 +++++++- drivers/gpu/drm/radeon/rs690.c | 8 +++++++- drivers/gpu/drm/radeon/rv515.c | 8 +++++++- drivers/gpu/drm/radeon/rv770.c | 1 + 13 files changed, 64 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 9be353b894c..f58254a3fb0 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3223,6 +3223,7 @@ int evergreen_resume(struct radeon_device *rdev) r = evergreen_startup(rdev); if (r) { DRM_ERROR("evergreen startup failed on resume\n"); + rdev->accel_working = false; return r; } diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index db09065e68f..2509c505acb 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1547,6 +1547,7 @@ int cayman_resume(struct radeon_device *rdev) r = cayman_startup(rdev); if (r) { DRM_ERROR("cayman startup failed on resume\n"); + rdev->accel_working = false; return r; } return r; diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 18cd84fae99..333cde9d4e7 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3928,6 +3928,8 @@ static int r100_startup(struct radeon_device *rdev) int r100_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCI) r100_pci_gart_disable(rdev); @@ -3947,7 +3949,11 @@ int r100_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r100_startup(rdev); + r = r100_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r100_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 3fc0d29a5f3..6829638cca4 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1431,6 +1431,8 @@ static int r300_startup(struct radeon_device *rdev) int r300_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -1452,7 +1454,11 @@ int r300_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r300_startup(rdev); + r = r300_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r300_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 666e28fe509..b14323053ba 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -291,6 +291,8 @@ static int r420_startup(struct radeon_device *rdev) int r420_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -316,7 +318,11 @@ int r420_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r420_startup(rdev); + r = r420_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r420_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 4ae1615e752..25084e824db 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -218,6 +218,8 @@ static int r520_startup(struct radeon_device *rdev) int r520_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -237,7 +239,11 @@ int r520_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return r520_startup(rdev); + r = r520_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int r520_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 4f08e5e6ee9..fbcd84803b6 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2529,6 +2529,7 @@ int r600_resume(struct radeon_device *rdev) r = r600_startup(rdev); if (r) { DRM_ERROR("r600 startup failed on resume\n"); + rdev->accel_working = false; return r; } diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index 435a3d970ab..e64bec488ed 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -453,6 +453,10 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) int r; radeon_mutex_lock(&rdev->cs_mutex); + if (!rdev->accel_working) { + radeon_mutex_unlock(&rdev->cs_mutex); + return -EBUSY; + } /* initialize parser */ memset(&parser, 0, sizeof(struct radeon_cs_parser)); parser.filp = filp; diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index b0ce84a20a6..866a05be75f 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -442,6 +442,8 @@ static int rs400_startup(struct radeon_device *rdev) int rs400_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ rs400_gart_disable(rdev); /* Resume clock before doing reset */ @@ -462,7 +464,11 @@ int rs400_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rs400_startup(rdev); + r = rs400_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rs400_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index c05865e5521..4fc700684dc 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -876,6 +876,8 @@ static int rs600_startup(struct radeon_device *rdev) int rs600_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ rs600_gart_disable(rdev); /* Resume clock before doing reset */ @@ -894,7 +896,11 @@ int rs600_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rs600_startup(rdev); + r = rs600_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rs600_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 4f24a0fa8c8..f68dff2fadc 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -659,6 +659,8 @@ static int rs690_startup(struct radeon_device *rdev) int rs690_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ rs400_gart_disable(rdev); /* Resume clock before doing reset */ @@ -677,7 +679,11 @@ int rs690_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rs690_startup(rdev); + r = rs690_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rs690_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 880637fd194..959bf4483be 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -424,6 +424,8 @@ static int rv515_startup(struct radeon_device *rdev) int rv515_resume(struct radeon_device *rdev) { + int r; + /* Make sur GART are not working */ if (rdev->flags & RADEON_IS_PCIE) rv370_pcie_gart_disable(rdev); @@ -443,7 +445,11 @@ int rv515_resume(struct radeon_device *rdev) radeon_surface_init(rdev); rdev->accel_working = true; - return rv515_startup(rdev); + r = rv515_startup(rdev); + if (r) { + rdev->accel_working = false; + } + return r; } int rv515_suspend(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index a1668b659dd..c049c0c5184 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1139,6 +1139,7 @@ int rv770_resume(struct radeon_device *rdev) r = rv770_startup(rdev); if (r) { DRM_ERROR("r600 startup failed on resume\n"); + rdev->accel_working = false; return r; } -- cgit v1.2.3-70-g09d2 From 3ac0eb6d62fde0a60a6c5c61e562af1db8fbf712 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 19 Feb 2012 21:42:03 -0500 Subject: drm/radeon/kms/atom: dpms bios scratch reg updates dpms bits not used on DCE4+ Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 9e72daeeddc..1f53ae74ada 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -3020,6 +3020,9 @@ radeon_atombios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on) struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); uint32_t bios_2_scratch; + if (ASIC_IS_DCE4(rdev)) + return; + if (rdev->family >= CHIP_R600) bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH); else -- cgit v1.2.3-70-g09d2 From 3569e5374df66a42ab66368b8bbb075e81d4e85c Mon Sep 17 00:00:00 2001 From: "Moger, Babu" Date: Thu, 2 Feb 2012 15:21:54 +0000 Subject: [SCSI] scsi_dh_rdac: Fix for unbalanced reference count This patch fixes an unbalanced refcount issue. Elevating the lock for both kref_put and also for controller node deletion. Previously, controller deletion was protected but the not the kref_put. This was causing the other thread to pick up the controller structure which was already kref'd zero. This was causing the following WARN_ON and also sometimes panic. WARNING: at lib/kref.c:43 kref_get+0x2d/0x30() (Not tainted) Hardware name: IBM System x3655 -[7985AC1]- Modules linked in: fuse scsi_dh_rdac autofs4 nfs lockd fscache nfs_acl auth_rpcgss sunrpc 8021q garp stp llc ipv6 ib_srp(U) scsi_transport_srp scsi_tgt ib_cm(U) ib_sa(U) ib_uverbs(U) ib_umad(U) mlx4_ib(U) mlx4_core(U) ib_mthca(U) ib_mad(U) ib_core(U) dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath uinput bnx2 ses enclosure sg ibmpex ibmaem ipmi_msghandler serio_raw k8temp hwmon amd64_edac_mod edac_core edac_mce_amd shpchp i2c_piix4 ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif sata_svw pata_acpi ata_generic pata_serverworks aacraid radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mod [last unloaded: freq_table] Pid: 13735, comm: srp_daemon Not tainted 2.6.32-71.el6.x86_64 #1 Call Trace: [] warn_slowpath_common+0x87/0xc0 [] warn_slowpath_null+0x1a/0x20 [] kref_get+0x2d/0x30 [] rdac_bus_attach+0x459/0x580 [scsi_dh_rdac] [] scsi_dh_handler_attach+0x2a/0x80 [] scsi_dh_notifier+0x9b/0xa0 [] notifier_call_chain+0x55/0x80 [] __blocking_notifier_call_chain+0x5a/0x80 [] blocking_notifier_call_chain+0x16/0x20 [] device_add+0x515/0x640 [] ? attribute_container_device_trigger+0xc4/0xe0 [] scsi_sysfs_add_sdev+0x89/0x2c0 [] scsi_probe_and_add_lun+0xea6/0xed0 [] ? scsi_alloc_target+0x292/0x2d0 [] __scsi_scan_target+0x121/0x750 [] ? sysfs_create_file+0x26/0x30 [] ? device_create_file+0x19/0x20 [] ? attribute_container_add_attrs+0x78/0x90 [] ? klist_next+0x4c/0xf0 [] ? transport_configure+0x0/0x20 [] ? attribute_container_device_trigger+0xc4/0xe0 [] scsi_scan_target+0xd0/0xe0 [] srp_create_target+0x75a/0x890 [ib_srp] [] dev_attr_store+0x20/0x30 [] sysfs_write_file+0xe5/0x170 [] vfs_write+0xb8/0x1a0 [] ? audit_syscall_entry+0x272/0x2a0 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b Signed-off-by: Babu Moger Acked-by: Mike Snitzer Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_rdac.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 53a31c753cb..20c4557f5ab 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -364,10 +364,7 @@ static void release_controller(struct kref *kref) struct rdac_controller *ctlr; ctlr = container_of(kref, struct rdac_controller, kref); - flush_workqueue(kmpath_rdacd); - spin_lock(&list_lock); list_del(&ctlr->node); - spin_unlock(&list_lock); kfree(ctlr); } @@ -376,20 +373,17 @@ static struct rdac_controller *get_controller(int index, char *array_name, { struct rdac_controller *ctlr, *tmp; - spin_lock(&list_lock); - list_for_each_entry(tmp, &ctlr_list, node) { if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) && (tmp->index == index) && (tmp->host == sdev->host)) { kref_get(&tmp->kref); - spin_unlock(&list_lock); return tmp; } } ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC); if (!ctlr) - goto done; + return NULL; /* initialize fields of controller */ memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN); @@ -405,8 +399,7 @@ static struct rdac_controller *get_controller(int index, char *array_name, INIT_WORK(&ctlr->ms_work, send_mode_select); INIT_LIST_HEAD(&ctlr->ms_head); list_add(&ctlr->node, &ctlr_list); -done: - spin_unlock(&list_lock); + return ctlr; } @@ -517,9 +510,12 @@ static int initialize_controller(struct scsi_device *sdev, index = 0; else index = 1; + + spin_lock(&list_lock); h->ctlr = get_controller(index, array_name, array_id, sdev); if (!h->ctlr) err = SCSI_DH_RES_TEMP_UNAVAIL; + spin_unlock(&list_lock); } return err; } @@ -906,7 +902,9 @@ static int rdac_bus_attach(struct scsi_device *sdev) return 0; clean_ctlr: + spin_lock(&list_lock); kref_put(&h->ctlr->kref, release_controller); + spin_unlock(&list_lock); failed: kfree(scsi_dh_data); @@ -921,14 +919,19 @@ static void rdac_bus_detach( struct scsi_device *sdev ) struct rdac_dh_data *h; unsigned long flags; - spin_lock_irqsave(sdev->request_queue->queue_lock, flags); scsi_dh_data = sdev->scsi_dh_data; + h = (struct rdac_dh_data *) scsi_dh_data->buf; + if (h->ctlr && h->ctlr->ms_queued) + flush_workqueue(kmpath_rdacd); + + spin_lock_irqsave(sdev->request_queue->queue_lock, flags); sdev->scsi_dh_data = NULL; spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); - h = (struct rdac_dh_data *) scsi_dh_data->buf; + spin_lock(&list_lock); if (h->ctlr) kref_put(&h->ctlr->kref, release_controller); + spin_unlock(&list_lock); kfree(scsi_dh_data); module_put(THIS_MODULE); sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME); -- cgit v1.2.3-70-g09d2 From ba9adbe67e288823ac1deb7f11576ab5653f833e Mon Sep 17 00:00:00 2001 From: Guo-Fu Tseng Date: Wed, 22 Feb 2012 08:58:10 +0000 Subject: jme: Fix FIFO flush issue Set the RX FIFO flush watermark lower. According to Federico and JMicron's reply, setting it to 16QW would be stable on most platforms. Otherwise, user might experience packet drop issue. CC: stable@kernel.org Reported-by: Federico Quagliata Fixed-by: Federico Quagliata Signed-off-by: Guo-Fu Tseng Signed-off-by: David S. Miller --- drivers/net/ethernet/jme.c | 10 +--------- drivers/net/ethernet/jme.h | 2 +- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 27d651a80f3..55cbf65512c 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -2328,19 +2328,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu) ((new_mtu) < IPV6_MIN_MTU)) return -EINVAL; - if (new_mtu > 4000) { - jme->reg_rxcs &= ~RXCS_FIFOTHNP; - jme->reg_rxcs |= RXCS_FIFOTHNP_64QW; - jme_restart_rx_engine(jme); - } else { - jme->reg_rxcs &= ~RXCS_FIFOTHNP; - jme->reg_rxcs |= RXCS_FIFOTHNP_128QW; - jme_restart_rx_engine(jme); - } netdev->mtu = new_mtu; netdev_update_features(netdev); + jme_restart_rx_engine(jme); jme_reset_link(jme); return 0; diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h index 4304072bd3c..3efc897c991 100644 --- a/drivers/net/ethernet/jme.h +++ b/drivers/net/ethernet/jme.h @@ -730,7 +730,7 @@ enum jme_rxcs_values { RXCS_RETRYCNT_60 = 0x00000F00, RXCS_DEFAULT = RXCS_FIFOTHTP_128T | - RXCS_FIFOTHNP_128QW | + RXCS_FIFOTHNP_16QW | RXCS_DMAREQSZ_128B | RXCS_RETRYGAP_256ns | RXCS_RETRYCNT_32, -- cgit v1.2.3-70-g09d2 From 0541743b4b35f2ddc9e490b4e354930168b60d23 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Tue, 21 Feb 2012 22:10:50 +0000 Subject: ethernet/broadcom: ip6_route_output() never returns NULL. ip6_route_output() never returns NULL, so it is wrong to check if the return value is NULL. Signed-off-by: RongQing.Li Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/cnic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index dd3a0a232ea..818a573669e 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -3584,7 +3584,11 @@ static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr, fl6.flowi6_oif = dst_addr->sin6_scope_id; *dst = ip6_route_output(&init_net, NULL, &fl6); - if (*dst) + if ((*dst)->error) { + dst_release(*dst); + *dst = NULL; + return -ENETUNREACH; + } else return 0; #endif -- cgit v1.2.3-70-g09d2 From 22ad7499bc9297e47c8779bf5523694f28338499 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Feb 2012 21:30:25 +0000 Subject: hso: memsetting wrong data in hso_get_count() The intent was to clear out the icount struct here, but we accidentally clear stack memory instead. It probably will lead to a NULL dereference right away. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 304fe78ff60..e1324b4a0f6 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1632,7 +1632,7 @@ static int hso_get_count(struct tty_struct *tty, struct hso_serial *serial = get_serial_by_tty(tty); struct hso_tiocmget *tiocmget = serial->tiocmget; - memset(&icount, 0, sizeof(struct serial_icounter_struct)); + memset(icount, 0, sizeof(struct serial_icounter_struct)); if (!tiocmget) return -ENOENT; -- cgit v1.2.3-70-g09d2 From ee932bf9acb2e2c6a309e808000f24856330e3f9 Mon Sep 17 00:00:00 2001 From: Scott Talbert Date: Tue, 21 Feb 2012 13:06:00 +0000 Subject: Move Logitech Harmony 900 from cdc_ether to zaurus In the current kernel implementation, the Logitech Harmony 900 remote control is matched to the cdc_ether driver through the generic USB_CDC_SUBCLASS_MDLM entry. However, this device appears to be of the pseudo-MDLM (Belcarra) type, rather than the standard one. This patch blacklists the Harmony 900 from the cdc_ether driver and whitelists it for the pseudo-MDLM driver in zaurus. Signed-off-by: Scott Talbert Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 7 +++++++ drivers/net/usb/zaurus.c | 7 +++++++ 2 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 41a61efc331..90a30026a93 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -573,6 +573,13 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, + /* * WHITELIST!!! * diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index ed2caed086f..c3197ce0e2a 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -354,6 +354,13 @@ static const struct usb_device_id products [] = { ZAURUS_MASTER_INTERFACE, .driver_info = OLYMPUS_MXL_INFO, }, + +/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ +{ + USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &bogus_mdlm_info, +}, { }, // END }; MODULE_DEVICE_TABLE(usb, products); -- cgit v1.2.3-70-g09d2 From 22c8bff6facebd6f1514ee1e37a6ffc892de7815 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Mon, 20 Feb 2012 12:19:03 -0500 Subject: mlx4_core: Exported functions can't be static At least on powerpc, it breaks the build if exported functions are static. Fix some static exported functions introduced with the mlx4 SR-IOV support added in 3.3-rc1. Signed-off-by: Doug Ledford Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +- drivers/net/ethernet/mellanox/mlx4/mr.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 8a21e10952e..9ea7cabcaf3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -685,7 +685,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, return err; } -static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port) +int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port) { struct mlx4_cmd_mailbox *outbox = ptr; diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c index 8deeef98280..25a80d71fb2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mr.c +++ b/drivers/net/ethernet/mellanox/mlx4/mr.c @@ -304,7 +304,7 @@ static int mlx4_HW2SW_MPT(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED); } -static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align, +int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align, u32 *base_mridx) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -320,14 +320,14 @@ static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align, } EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range); -static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt) +void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt) { struct mlx4_priv *priv = mlx4_priv(dev); mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt); } EXPORT_SYMBOL_GPL(mlx4_mr_release_range); -static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd, +int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd, u64 iova, u64 size, u32 access, int npages, int page_shift, struct mlx4_mr *mr) { @@ -457,7 +457,7 @@ int mlx4_mr_alloc(struct mlx4_dev *dev, u32 pd, u64 iova, u64 size, u32 access, } EXPORT_SYMBOL_GPL(mlx4_mr_alloc); -static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr) +void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr) { int err; @@ -852,7 +852,7 @@ err_free: } EXPORT_SYMBOL_GPL(mlx4_fmr_alloc); -static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, +int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd, u32 access, int max_pages, int max_maps, u8 page_shift, struct mlx4_fmr *fmr) { @@ -954,7 +954,7 @@ int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr) } EXPORT_SYMBOL_GPL(mlx4_fmr_free); -static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr) +int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr) { if (fmr->maps) return -EBUSY; -- cgit v1.2.3-70-g09d2 From 363434b5dc352464ac7601547891e5fc9105f124 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 22 Feb 2012 08:13:52 -0800 Subject: hwmon: (ads1015) Fix file leak in probe function An error while creating sysfs attribute files in the driver's probe function results in an error abort, but already created files are not removed. This patch fixes the problem. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Cc: Dirk Eibach Acked-by: Jean Delvare --- drivers/hwmon/ads1015.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c index eedca3cf996..dd87ae96c26 100644 --- a/drivers/hwmon/ads1015.c +++ b/drivers/hwmon/ads1015.c @@ -271,7 +271,7 @@ static int ads1015_probe(struct i2c_client *client, continue; err = device_create_file(&client->dev, &ads1015_in[k].dev_attr); if (err) - goto exit_free; + goto exit_remove; } data->hwmon_dev = hwmon_device_register(&client->dev); @@ -285,7 +285,6 @@ static int ads1015_probe(struct i2c_client *client, exit_remove: for (k = 0; k < ADS1015_CHANNELS; ++k) device_remove_file(&client->dev, &ads1015_in[k].dev_attr); -exit_free: kfree(data); exit: return err; -- cgit v1.2.3-70-g09d2 From c1c1a3d012fe5e82a9a025fb4b5a4f8ee67a53f6 Mon Sep 17 00:00:00 2001 From: Nikolaus Schulz Date: Wed, 22 Feb 2012 23:18:44 +0100 Subject: hwmon: (f75375s) Fix register write order when setting fans to full speed By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan to full speed. In the f75375s driver, this need be done by enabling manual fan control, plus duty mode for the F875387 chip, and then setting the maximum duty cycle. Fix a bug where the two necessary register writes were swapped, effectively discarding the setting to full-speed. Signed-off-by: Nikolaus Schulz Cc: Riku Voipio Signed-off-by: Guenter Roeck --- drivers/hwmon/f75375s.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index f609b5727ba..6bab2001ef3 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); break; case 1: /* PWM */ fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); @@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) case 0: /* full speed */ fanmode |= (3 << FAN_CTRL_MODE(nr)); data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); break; case 1: /* PWM */ fanmode |= (3 << FAN_CTRL_MODE(nr)); @@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); data->pwm_enable[nr] = val; + if (val == 0) + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), + data->pwm[nr]); return 0; } -- cgit v1.2.3-70-g09d2 From b8e3995af4c7da7707b1710332a31f66e06b74dc Mon Sep 17 00:00:00 2001 From: David McKay Date: Tue, 21 Feb 2012 21:24:57 +0000 Subject: netdev/phy/icplus: Correct broken phy_init code The code for ip1001_config_init() was totally broken if you were not using RGMII. Instead of returning an error code or zero it actually returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was also trying to set the IP1001_APS_ON bit , but never actually wrote back the register. The error checking was also incorrect in both this function and the reset function, so this patch fixes that up in a consistent fashion. Signed-off-by: David McKay Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index c81f136ae67..7ee4f5822bb 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -98,20 +98,24 @@ static int ip175c_config_init(struct phy_device *phydev) static int ip1xx_reset(struct phy_device *phydev) { - int err, bmcr; + int bmcr; /* Software Reset PHY */ bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; bmcr |= BMCR_RESET; - err = phy_write(phydev, MII_BMCR, bmcr); - if (err < 0) - return err; + bmcr = phy_write(phydev, MII_BMCR, bmcr); + if (bmcr < 0) + return bmcr; do { bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; } while (bmcr & BMCR_RESET); - return err; + return 0; } static int ip1001_config_init(struct phy_device *phydev) @@ -124,7 +128,10 @@ static int ip1001_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2); + if (c < 0) + return c; c |= IP1001_APS_ON; + c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c); if (c < 0) return c; @@ -132,11 +139,16 @@ static int ip1001_config_init(struct phy_device *phydev) /* Additional delay (2ns) used to adjust RX clock phase * at RGMII interface */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); + if (c < 0) + return c; + c |= IP1001_PHASE_SEL_MASK; c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c); + if (c < 0) + return c; } - return c; + return 0; } static int ip101a_config_init(struct phy_device *phydev) -- cgit v1.2.3-70-g09d2 From e3e09f2645b435062a34a2587a32ae8e5a5b48ab Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Tue, 21 Feb 2012 21:26:28 +0000 Subject: phy: IC+101G and PHY_HAS_INTERRUPT flag This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series. Also the patch does a simple dity-up to signal that the driver actually is for IP101A LF and IP101G devices. In fact, these are two similar PHYs that have the same IDs and mainly differ for the EEE capability supported in the G series. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 7ee4f5822bb..0856e1b7a84 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -30,16 +30,16 @@ #include #include -MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers"); +MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers"); MODULE_AUTHOR("Michael Barkowski"); MODULE_LICENSE("GPL"); -/* IP101A/IP1001 */ -#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ -#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ -#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ -#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ -#define IP101A_APS_ON 2 /* IP101A APS Mode bit */ +/* IP101A/G - IP1001 */ +#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ +#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ +#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ +#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ +#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ static int ip175c_config_init(struct phy_device *phydev) { @@ -151,7 +151,7 @@ static int ip1001_config_init(struct phy_device *phydev) return 0; } -static int ip101a_config_init(struct phy_device *phydev) +static int ip101a_g_config_init(struct phy_device *phydev) { int c; @@ -161,7 +161,7 @@ static int ip101a_config_init(struct phy_device *phydev) /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); - c |= IP101A_APS_ON; + c |= IP101A_G_APS_ON; return c; } @@ -203,6 +203,7 @@ static struct phy_driver ip1001_driver = { .phy_id_mask = 0x0ffffff0, .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_INTERRUPT, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, @@ -211,13 +212,14 @@ static struct phy_driver ip1001_driver = { .driver = { .owner = THIS_MODULE,}, }; -static struct phy_driver ip101a_driver = { +static struct phy_driver ip101a_g_driver = { .phy_id = 0x02430c54, - .name = "ICPlus IP101A", + .name = "ICPlus IP101A/G", .phy_id_mask = 0x0ffffff0, .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .config_init = &ip101a_config_init, + .flags = PHY_HAS_INTERRUPT, + .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .suspend = genphy_suspend, @@ -233,7 +235,7 @@ static int __init icplus_init(void) if (ret < 0) return -ENODEV; - ret = phy_driver_register(&ip101a_driver); + ret = phy_driver_register(&ip101a_g_driver); if (ret < 0) return -ENODEV; @@ -243,7 +245,7 @@ static int __init icplus_init(void) static void __exit icplus_exit(void) { phy_driver_unregister(&ip1001_driver); - phy_driver_unregister(&ip101a_driver); + phy_driver_unregister(&ip101a_g_driver); phy_driver_unregister(&ip175c_driver); } @@ -253,6 +255,7 @@ module_exit(icplus_exit); static struct mdio_device_id __maybe_unused icplus_tbl[] = { { 0x02430d80, 0x0ffffff0 }, { 0x02430d90, 0x0ffffff0 }, + { 0x02430c54, 0x0ffffff0 }, { } }; -- cgit v1.2.3-70-g09d2 From 1e0f03d57d7092f1f4d93a91fb7ece57b1514a88 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Thu, 23 Feb 2012 07:04:35 +0000 Subject: mlx4_core: Fixing array indexes when setting port types Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 32f8799db19..d498f049c74 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -538,7 +538,7 @@ int mlx4_change_port_types(struct mlx4_dev *dev, mlx4_unregister_device(dev); for (port = 1; port <= dev->caps.num_ports; port++) { mlx4_CLOSE_PORT(dev, port); - dev->caps.port_type[port + 1] = port_types[port]; + dev->caps.port_type[port] = port_types[port - 1]; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, " -- cgit v1.2.3-70-g09d2 From 5d69703263d588dbb03f4e57091afd8942d96e6d Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Thu, 23 Feb 2012 01:14:17 +0000 Subject: davinci_emac: Do not free all rx dma descriptors during init This patch fixes a regression that was introduced by commit 0a5f38467765ee15478db90d81e40c269c8dda20 davinci_emac: Add Carrier Link OK check in Davinci RX Handler Said commit adds a check whether the carrier link is ok. If the link is not ok, the skb is freed and no new dma descriptor added to the rx dma channel. This causes trouble during initialization when the carrier status has not yet been updated. If a lot of packets are received while netif_carrier_ok returns false, all dma descriptors are freed and the rx dma transfer is stopped. The bug occurs when the board is connected to a network with lots of traffic and the ifconfig down/up is done, e.g., when reconfiguring the interface with DHCP. The bug can be reproduced by flood pinging the davinci board while doing ifconfig eth0 down ifconfig eth0 up on the board. After that, the rx path stops working and the overrun value reported by ifconfig is counting up. This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20 and instead issues warnings only if cpdma_chan_submit returns -ENOMEM. Signed-off-by: Christian Riesch Cc: Cc: Hegde, Vinay Cc: Cyril Chemparathy Cc: Sascha Hauer Tested-by: Rajashekhara, Sudhakar Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 4fa0bcb25df..4b2f54565f6 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1009,7 +1009,7 @@ static void emac_rx_handler(void *token, int len, int status) int ret; /* free and bail if we are shutting down */ - if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) { + if (unlikely(!netif_running(ndev))) { dev_kfree_skb_any(skb); return; } @@ -1038,7 +1038,9 @@ static void emac_rx_handler(void *token, int len, int status) recycle: ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, skb_tailroom(skb), GFP_KERNEL); - if (WARN_ON(ret < 0)) + + WARN_ON(ret == -ENOMEM); + if (unlikely(ret < 0)) dev_kfree_skb_any(skb); } -- cgit v1.2.3-70-g09d2 From dc91ad8e84593eb49c65cca70537088782b21e08 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 24 Feb 2012 03:44:34 -0800 Subject: hwmon: (max34440) Fix resetting temperature history Temperature history is reset by writing 0x8000 into the peak temperature register, not 0xffff. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/pmbus/max34440.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c index beaf5a8d9c4..9b97a5b3cf3 100644 --- a/drivers/hwmon/pmbus/max34440.c +++ b/drivers/hwmon/pmbus/max34440.c @@ -82,7 +82,7 @@ static int max34440_write_word_data(struct i2c_client *client, int page, case PMBUS_VIRT_RESET_TEMP_HISTORY: ret = pmbus_write_word_data(client, page, MAX34440_MFR_TEMPERATURE_PEAK, - 0xffff); + 0x8000); break; default: ret = -ENODATA; -- cgit v1.2.3-70-g09d2 From 21ca54e99b085b9ff4c91ca41afe42a439966109 Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Fri, 24 Feb 2012 06:56:39 +0000 Subject: enic: Fix endianness bug. Sparse complaints the endian bug. Signed-off-by: Santosh Nayak Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/cq_enet_desc.h | 2 +- drivers/net/ethernet/cisco/enic/enic_pp.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cisco/enic/cq_enet_desc.h b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h index c2c0680a114..ac37cacc613 100644 --- a/drivers/net/ethernet/cisco/enic/cq_enet_desc.h +++ b/drivers/net/ethernet/cisco/enic/cq_enet_desc.h @@ -157,7 +157,7 @@ static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc, CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0; *fcoe_enc_error = (desc->flags & CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0; - *fcoe_eof = (u8)((desc->checksum_fcoe >> + *fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >> CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) & CQ_ENET_RQ_DESC_FCOE_EOF_MASK); *checksum = 0; diff --git a/drivers/net/ethernet/cisco/enic/enic_pp.c b/drivers/net/ethernet/cisco/enic/enic_pp.c index 22bf03a1829..c347b6236f8 100644 --- a/drivers/net/ethernet/cisco/enic/enic_pp.c +++ b/drivers/net/ethernet/cisco/enic/enic_pp.c @@ -72,7 +72,7 @@ static int enic_set_port_profile(struct enic *enic, int vf) struct enic_port_profile *pp; struct vic_provinfo *vp; const u8 oui[3] = VIC_PROVINFO_CISCO_OUI; - const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX); + const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX); char uuid_str[38]; char client_mac_str[18]; u8 *client_mac; -- cgit v1.2.3-70-g09d2 From 8a49ad6e89feb5015e77ce6efeb2678947117e20 Mon Sep 17 00:00:00 2001 From: Ben McKeegan Date: Fri, 24 Feb 2012 06:33:56 +0000 Subject: ppp: fix 'ppp_mp_reconstruct bad seq' errors This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by: Ben McKeegan Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_generic.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index edfa15d2e79..486b4048850 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -2024,14 +2024,22 @@ ppp_mp_reconstruct(struct ppp *ppp) continue; } if (PPP_MP_CB(p)->sequence != seq) { + u32 oldseq; /* Fragment `seq' is missing. If it is after minseq, it might arrive later, so stop here. */ if (seq_after(seq, minseq)) break; /* Fragment `seq' is lost, keep going. */ lost = 1; + oldseq = seq; seq = seq_before(minseq, PPP_MP_CB(p)->sequence)? minseq + 1: PPP_MP_CB(p)->sequence; + + if (ppp->debug & 1) + netdev_printk(KERN_DEBUG, ppp->dev, + "lost frag %u..%u\n", + oldseq, seq-1); + goto again; } @@ -2076,6 +2084,10 @@ ppp_mp_reconstruct(struct ppp *ppp) struct sk_buff *tmp2; skb_queue_reverse_walk_from_safe(list, p, tmp2) { + if (ppp->debug & 1) + netdev_printk(KERN_DEBUG, ppp->dev, + "discarding frag %u\n", + PPP_MP_CB(p)->sequence); __skb_unlink(p, list); kfree_skb(p); } @@ -2091,6 +2103,17 @@ ppp_mp_reconstruct(struct ppp *ppp) /* If we have discarded any fragments, signal a receive error. */ if (PPP_MP_CB(head)->sequence != ppp->nextseq) { + skb_queue_walk_safe(list, p, tmp) { + if (p == head) + break; + if (ppp->debug & 1) + netdev_printk(KERN_DEBUG, ppp->dev, + "discarding frag %u\n", + PPP_MP_CB(p)->sequence); + __skb_unlink(p, list); + kfree_skb(p); + } + if (ppp->debug & 1) netdev_printk(KERN_DEBUG, ppp->dev, " missed pkts %u..%u\n", -- cgit v1.2.3-70-g09d2 From ff3bc1e7527504a93710535611b2f812f3bb89bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 25 Feb 2012 00:03:10 +0000 Subject: sfc: Fix assignment of ip_summed for pre-allocated skbs When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/rx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/rx.c b/drivers/net/ethernet/sfc/rx.c index aca34986176..fc52fca7419 100644 --- a/drivers/net/ethernet/sfc/rx.c +++ b/drivers/net/ethernet/sfc/rx.c @@ -156,11 +156,10 @@ static int efx_init_rx_buffers_skb(struct efx_rx_queue *rx_queue) if (unlikely(!skb)) return -ENOMEM; - /* Adjust the SKB for padding and checksum */ + /* Adjust the SKB for padding */ skb_reserve(skb, NET_IP_ALIGN); rx_buf->len = skb_len - NET_IP_ALIGN; rx_buf->is_page = false; - skb->ip_summed = CHECKSUM_UNNECESSARY; rx_buf->dma_addr = pci_map_single(efx->pci_dev, skb->data, rx_buf->len, @@ -496,6 +495,7 @@ static void efx_rx_packet_gro(struct efx_channel *channel, EFX_BUG_ON_PARANOID(!checksummed); rx_buf->u.skb = NULL; + skb->ip_summed = CHECKSUM_UNNECESSARY; gro_result = napi_gro_receive(napi, skb); } -- cgit v1.2.3-70-g09d2