From c34002c102880bfac5b449b41e5313dcda186db8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 26 Mar 2008 19:12:38 -0700 Subject: iop: unconditionally initialize the ATU on platforms known to be 'hosts' Platforms like iq80321 and iq80331 which may be host-bus-adapters require 'iop3xx_init_atu=y' to be specified on the kernel command line. Signed-off-by: Dan Williams --- include/asm-arm/hardware/iop3xx.h | 9 +-------- include/asm-arm/mach/pci.h | 1 + 2 files changed, 2 insertions(+), 8 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index ede377ec914..18f6937f501 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -29,6 +29,7 @@ extern void gpio_line_config(int line, int direction); extern int gpio_line_get(int line); extern void gpio_line_set(int line, int value); extern int init_atu; +extern int iop3xx_get_init_atu(void); #endif @@ -112,14 +113,6 @@ extern int init_atu; #define IOP3XX_INIT_ATU_DISABLE -1 #define IOP3XX_INIT_ATU_ENABLE 1 -#ifdef CONFIG_IOP3XX_ATU -#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ - IOP3XX_INIT_ATU_ENABLE : init_atu) -#else -#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ - IOP3XX_INIT_ATU_DISABLE : init_atu) -#endif - /* Messaging Unit */ #define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) #define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index 24621c49a0c..9d4f6b5ea41 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -55,6 +55,7 @@ void pci_common_init(struct hw_pci *); extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); extern void iop3xx_pci_preinit(void); +extern void iop3xx_pci_preinit_cond(void); extern int dc21285_setup(int nr, struct pci_sys_data *); extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); -- cgit v1.2.3-70-g09d2 From 92aecfa95523384923b52c8ddaf948fc02a53e82 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:39 -0400 Subject: ehci-orion: mbus decode window support Make it possible to pass mbus_dram_target_info to the ehci-orion driver via the platform data, make the ehci-orion driver program the window registers based on this data if it is passed in, and make the Orion platform setup code use this method instead of programming the EHCI mbus window registers by hand. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/addr-map.c | 49 ----------------------------------- arch/arm/mach-orion/common.c | 8 +++++- arch/arm/mach-orion/common.h | 1 - drivers/usb/host/ehci-orion.c | 36 +++++++++++++++++++++++-- include/asm-arm/arch-orion/platform.h | 9 +++++++ 5 files changed, 50 insertions(+), 53 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index 69cd0876f6b..40bcb986ab9 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -103,15 +103,6 @@ #define ETH_MAX_WIN 6 #define ETH_MAX_REMAP_WIN 4 -/* - * USB Address Decode Windows registers - */ -#define USB_WIN_CTRL(i, w) ((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \ - : ORION_USB1_REG(0x320 + ((w) << 4))) -#define USB_WIN_BASE(i, w) ((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \ - : ORION_USB1_REG(0x324 + ((w) << 4))) -#define USB_MAX_WIN 4 - /* * SATA Address Decode Windows registers */ @@ -262,46 +253,6 @@ void __init orion_setup_cpu_wins(void) orion_mbus_dram_info.num_cs = cs; } -void __init orion_setup_usb_wins(void) -{ - int i; - u32 usb_if, dev, rev; - u32 max_usb_if = 1; - - orion_pcie_id(&dev, &rev); - if (dev == MV88F5182_DEV_ID) - max_usb_if = 2; - - for (usb_if = 0; usb_if < max_usb_if; usb_if++) { - /* - * First, disable and clear windows - */ - for (i = 0; i < USB_MAX_WIN; i++) { - orion_write(USB_WIN_BASE(usb_if, i), 0); - orion_write(USB_WIN_CTRL(usb_if, i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(USB_WIN_CTRL(usb_if, i), - ((size-1) & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - (TARGET_DDR << 4) | WIN_EN); - orion_write(USB_WIN_BASE(usb_if, i), - base & 0xffff0000); - } - } - } -} - void __init orion_setup_eth_wins(void) { int i; diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index cc16588e8c0..d33c01dfc3f 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "common.h" /***************************************************************************** @@ -149,6 +150,10 @@ static struct resource orion_ehci1_resources[] = { }, }; +static struct orion_ehci_data orion_ehci_data = { + .dram = &orion_mbus_dram_info, +}; + static u64 ehci_dmamask = 0xffffffffUL; static struct platform_device orion_ehci0 = { @@ -157,6 +162,7 @@ static struct platform_device orion_ehci0 = { .dev = { .dma_mask = &ehci_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &orion_ehci_data, }, .resource = orion_ehci0_resources, .num_resources = ARRAY_SIZE(orion_ehci0_resources), @@ -168,6 +174,7 @@ static struct platform_device orion_ehci1 = { .dev = { .dma_mask = &ehci_dmamask, .coherent_dma_mask = 0xffffffff, + .platform_data = &orion_ehci_data, }, .resource = orion_ehci1_resources, .num_resources = ARRAY_SIZE(orion_ehci1_resources), @@ -334,7 +341,6 @@ void __init orion_init(void) * Setup Orion address map */ orion_setup_cpu_wins(); - orion_setup_usb_wins(); orion_setup_eth_wins(); if (dev == MV88F5182_DEV_ID) orion_setup_sata_wins(); diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 961daaa0b91..c100355754f 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -33,7 +33,6 @@ extern struct mbus_dram_target_info orion_mbus_dram_info; void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap); void orion_setup_cpu_wins(void); void orion_setup_eth_wins(void); -void orion_setup_usb_wins(void); void orion_setup_sata_wins(void); /* diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index e129981f139..0f0eb89c8cf 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -11,15 +11,19 @@ #include #include #include +#include #include +#include #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) -#define USB_CAUSE 0x310 -#define USB_MASK 0x314 #define USB_CMD 0x140 #define USB_MODE 0x1a8 +#define USB_CAUSE 0x310 +#define USB_MASK 0x314 +#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) +#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4)) #define USB_IPG 0x360 #define USB_PHY_PWR_CTRL 0x400 #define USB_PHY_TX_CTRL 0x420 @@ -162,8 +166,30 @@ static const struct hc_driver ehci_orion_hc_driver = { .bus_resume = ehci_bus_resume, }; +static void __init +ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, + struct mbus_dram_target_info *dram) +{ + int i; + + for (i = 0; i < 4; i++) { + wrl(USB_WINDOW_CTRL(i), 0); + wrl(USB_WINDOW_BASE(i), 0); + } + + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + + wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1); + wrl(USB_WINDOW_BASE(i), cs->base); + } +} + static int __init ehci_orion_drv_probe(struct platform_device *pdev) { + struct orion_ehci_data *pd = pdev->dev.platform_data; struct resource *res; struct usb_hcd *hcd; struct ehci_hcd *ehci; @@ -226,6 +252,12 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev) ehci->is_tdi_rh_tt = 1; ehci->sbrn = 0x20; + /* + * (Re-)program MBUS remapping windows if we are asked to. + */ + if (pd != NULL && pd->dram != NULL) + ehci_orion_conf_mbus_windows(hcd, pd->dram); + /* * setup Orion USB controller */ diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/arch-orion/platform.h index 143c38e2fa0..0e33fe536ef 100644 --- a/include/asm-arm/arch-orion/platform.h +++ b/include/asm-arm/arch-orion/platform.h @@ -11,6 +11,14 @@ #ifndef __ASM_ARCH_PLATFORM_H__ #define __ASM_ARCH_PLATFORM_H__ +/* + * Orion EHCI platform driver data. + */ +struct orion_ehci_data { + struct mbus_dram_target_info *dram; +}; + + /* * Device bus NAND private data */ @@ -22,4 +30,5 @@ struct orion_nand_data { u8 width; /* buswidth */ }; + #endif -- cgit v1.2.3-70-g09d2 From 01eb569823792ab83b2810fcb31fa38560b08951 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:40 -0400 Subject: plat-orion: share IRQ handling code Split off Orion IRQ handling code into plat-orion/, and add support for multiple sets of (32) interrupts. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/irq.c | 35 ++-------------------- arch/arm/plat-orion/Makefile | 2 +- arch/arm/plat-orion/irq.c | 64 ++++++++++++++++++++++++++++++++++++++++ include/asm-arm/plat-orion/irq.h | 17 +++++++++++ 4 files changed, 84 insertions(+), 34 deletions(-) create mode 100644 arch/arm/plat-orion/irq.c create mode 100644 include/asm-arm/plat-orion/irq.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c index df7e12ad378..855793afcca 100644 --- a/arch/arm/mach-orion/irq.c +++ b/arch/arm/mach-orion/irq.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "common.h" /***************************************************************************** @@ -197,41 +198,9 @@ static void __init orion_init_gpio_irq(void) /***************************************************************************** * Orion Main IRQ ****************************************************************************/ -static void orion_main_irq_mask(u32 irq) -{ - orion_clrbits(MAIN_IRQ_MASK, 1 << irq); -} - -static void orion_main_irq_unmask(u32 irq) -{ - orion_setbits(MAIN_IRQ_MASK, 1 << irq); -} - -static struct irq_chip orion_main_irq_chip = { - .name = "Orion-IRQ-Main", - .ack = orion_main_irq_mask, - .mask = orion_main_irq_mask, - .unmask = orion_main_irq_unmask, -}; - static void __init orion_init_main_irq(void) { - int i; - - /* - * Mask and clear Main IRQ interrupts - */ - orion_write(MAIN_IRQ_MASK, 0x0); - orion_write(MAIN_IRQ_CAUSE, 0x0); - - /* - * Register level handler for Main IRQs - */ - for (i = 0; i < IRQ_ORION_GPIO_START; i++) { - set_irq_chip(i, &orion_main_irq_chip); - set_irq_handler(i, handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } + orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); } void __init orion_init_irq(void) diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index 2327762133f..ea4ce342a19 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := +obj-y := irq.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c new file mode 100644 index 00000000000..c5b669d234b --- /dev/null +++ b/arch/arm/plat-orion/irq.c @@ -0,0 +1,64 @@ +/* + * arch/arm/plat-orion/irq.c + * + * Marvell Orion SoC IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +static void orion_irq_mask(u32 irq) +{ + void __iomem *maskaddr = get_irq_chip_data(irq); + u32 mask; + + mask = readl(maskaddr); + mask &= ~(1 << (irq & 31)); + writel(mask, maskaddr); +} + +static void orion_irq_unmask(u32 irq) +{ + void __iomem *maskaddr = get_irq_chip_data(irq); + u32 mask; + + mask = readl(maskaddr); + mask |= 1 << (irq & 31); + writel(mask, maskaddr); +} + +static struct irq_chip orion_irq_chip = { + .name = "orion_irq", + .ack = orion_irq_mask, + .mask = orion_irq_mask, + .unmask = orion_irq_unmask, +}; + +void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) +{ + unsigned int i; + + /* + * Mask all interrupts initially. + */ + writel(0, maskaddr); + + /* + * Register IRQ sources. + */ + for (i = 0; i < 32; i++) { + unsigned int irq = irq_start + i; + + set_irq_chip(irq, &orion_irq_chip); + set_irq_chip_data(irq, maskaddr); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } +} diff --git a/include/asm-arm/plat-orion/irq.h b/include/asm-arm/plat-orion/irq.h new file mode 100644 index 00000000000..94aeed919d5 --- /dev/null +++ b/include/asm-arm/plat-orion/irq.h @@ -0,0 +1,17 @@ +/* + * include/asm-arm/plat-orion/irq.h + * + * Marvell Orion SoC IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_IRQ_H +#define __ASM_PLAT_ORION_IRQ_H + +void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); + + +#endif -- cgit v1.2.3-70-g09d2 From abc0197d7a74e51a1581ce9971d7c2c0f2adadaf Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:40 -0400 Subject: plat-orion: share PCIe handling code Split off Orion PCIe handling code into plat-orion/. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/common.h | 4 +- arch/arm/mach-orion/pci.c | 343 ++++++++++---------------------------- arch/arm/plat-orion/Makefile | 2 +- arch/arm/plat-orion/pcie.c | 245 +++++++++++++++++++++++++++ include/asm-arm/plat-orion/pcie.h | 31 ++++ 5 files changed, 365 insertions(+), 260 deletions(-) create mode 100644 arch/arm/plat-orion/pcie.c create mode 100644 include/asm-arm/plat-orion/pcie.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index b676be0a4a8..9a5afefac4d 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -43,8 +43,8 @@ struct pci_sys_data; struct pci_bus; void orion_pcie_id(u32 *dev, u32 *rev); -u32 orion_pcie_local_bus_nr(void); -u32 orion_pci_local_bus_nr(void); +int orion_pcie_local_bus_nr(void); +int orion_pci_local_bus_nr(void); int orion_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c index cfd3d064c20..5240a245c7e 100644 --- a/arch/arm/mach-orion/pci.c +++ b/arch/arm/mach-orion/pci.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "common.h" /***************************************************************************** @@ -32,288 +33,136 @@ /***************************************************************************** * PCIE controller ****************************************************************************/ -#define PCIE_CTRL ORION_PCIE_REG(0x1a00) -#define PCIE_STAT ORION_PCIE_REG(0x1a04) -#define PCIE_DEV_ID ORION_PCIE_REG(0x0000) -#define PCIE_CMD_STAT ORION_PCIE_REG(0x0004) -#define PCIE_DEV_REV ORION_PCIE_REG(0x0008) -#define PCIE_MASK ORION_PCIE_REG(0x1910) -#define PCIE_CONF_ADDR ORION_PCIE_REG(0x18f8) -#define PCIE_CONF_DATA ORION_PCIE_REG(0x18fc) - -/* - * PCIE_STAT bits - */ -#define PCIE_STAT_LINK_DOWN 1 -#define PCIE_STAT_BUS_OFFS 8 -#define PCIE_STAT_BUS_MASK (0xff << PCIE_STAT_BUS_OFFS) -#define PCIE_STAT_DEV_OFFS 20 -#define PCIE_STAT_DEV_MASK (0x1f << PCIE_STAT_DEV_OFFS) - -/* - * PCIE_CONF_ADDR bits - */ -#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 24) | ((r) & 0xfc)) -#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) -#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) -#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) -#define PCIE_CONF_ADDR_EN (1 << 31) - -/* - * PCIE Address Decode Windows registers - */ -#define PCIE_BAR_CTRL(n) ORION_PCIE_REG(0x1804 + ((n - 1) * 4)) -#define PCIE_BAR_LO(n) ORION_PCIE_REG(0x0010 + ((n) * 8)) -#define PCIE_BAR_HI(n) ORION_PCIE_REG(0x0014 + ((n) * 8)) -#define PCIE_WIN_CTRL(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1820 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1880)) -#define PCIE_WIN_BASE(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x1824 + ((n) << 4)) : \ - ORION_PCIE_REG(0x1884)) -#define PCIE_WIN_REMAP(n) (((n) < 5) ? \ - ORION_PCIE_REG(0x182c + ((n) << 4)) : \ - ORION_PCIE_REG(0x188c)) -#define PCIE_MAX_BARS 3 -#define PCIE_MAX_WINS 6 - -/* - * Use PCIE BAR '1' for all DDR banks - */ -#define PCIE_DRAM_BAR 1 - -/* - * PCIE config cycles are done by programming the PCIE_CONF_ADDR register - * and then reading the PCIE_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pcie_lock); +#define PCIE_BASE ((void __iomem *)ORION_PCIE_VIRT_BASE) void orion_pcie_id(u32 *dev, u32 *rev) { - *dev = orion_read(PCIE_DEV_ID) >> 16; - *rev = orion_read(PCIE_DEV_REV) & 0xff; -} - -u32 orion_pcie_local_bus_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS); -} - -static u32 orion_pcie_local_dev_nr(void) -{ - u32 stat = orion_read(PCIE_STAT); - return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS); -} - -static u32 orion_pcie_no_link(void) -{ - u32 stat = orion_read(PCIE_STAT); - return(stat & PCIE_STAT_LINK_DOWN); -} - -static void orion_pcie_set_bus_nr(int nr) -{ - orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK); - orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS); + *dev = orion_pcie_dev_id(PCIE_BASE); + *rev = orion_pcie_rev(PCIE_BASE); } -/* - * Setup PCIE BARs and Address Decode Wins: - * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks - * WIN[0-3] -> DRAM bank[0-3] - */ -static void orion_setup_pcie_wins(struct mbus_dram_target_info *dram) +int orion_pcie_local_bus_nr(void) { - u32 size; - int i; - - /* - * First, disable and clear BARs and windows - */ - for (i = 1; i < PCIE_MAX_BARS; i++) { - writel(0, PCIE_BAR_CTRL(i)); - writel(0, PCIE_BAR_LO(i)); - writel(0, PCIE_BAR_HI(i)); - } - - for (i = 0; i < PCIE_MAX_WINS; i++) { - writel(0, PCIE_WIN_CTRL(i)); - writel(0, PCIE_WIN_BASE(i)); - writel(0, PCIE_WIN_REMAP(i)); - } - - /* - * Setup windows for DDR banks. Count total DDR size on the fly. - */ - size = 0; - for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; - - writel(cs->base & 0xffff0000, PCIE_WIN_BASE(i)); - writel(0, PCIE_WIN_REMAP(i)); - writel(((cs->size - 1) & 0xffff0000) | - (cs->mbus_attr << 8) | - (dram->mbus_dram_target_id << 4) | - (PCIE_DRAM_BAR << 1) | 1, PCIE_WIN_CTRL(i)); - - size += cs->size; - } - - /* - * Setup BAR[1] to all DRAM banks - */ - writel(dram->cs[0].base, PCIE_BAR_LO(PCIE_DRAM_BAR)); - writel(0, PCIE_BAR_HI(PCIE_DRAM_BAR)); - writel(((size - 1) & 0xffff0000) | 1, PCIE_BAR_CTRL(PCIE_DRAM_BAR)); + return orion_pcie_get_local_bus_nr(PCIE_BASE); } -static void orion_pcie_master_slave_enable(void) -{ - orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY); -} - -static void orion_pcie_enable_interrupts(void) -{ - /* - * Enable interrupts lines - * INTA[24] INTB[25] INTC[26] INTD[27] - */ - orion_setbits(PCIE_MASK, 0xf<<24); -} - -static int orion_pcie_valid_config(u32 bus, u32 dev) +static int pcie_valid_config(int bus, int dev) { /* * Don't go out when trying to access -- - * 1. our own device + * 1. our own device / nonexisting device on local bus * 2. where there's no device connected (no link) - * 3. nonexisting devices on local bus */ - - if ((orion_pcie_local_bus_nr() == bus) && - (orion_pcie_local_dev_nr() == dev)) - return 0; - - if (orion_pcie_no_link()) + if (bus == 0 && dev != 1) return 0; - if (bus == orion_pcie_local_bus_nr()) - if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) || - ((orion_pcie_local_dev_nr() != 0) && (dev != 0))) + if (!orion_pcie_link_up(PCIE_BASE)) return 0; return 1; } -static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) + +/* + * PCIE config cycles are done by programming the PCIE_CONF_ADDR register + * and then reading the PCIE_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion_pcie_lock); + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) { unsigned long flags; - unsigned int dev, rev, pcie_addr; + int ret; - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { *val = 0xffffffff; return PCIBIOS_DEVICE_NOT_FOUND; } spin_lock_irqsave(&orion_pcie_lock, flags); + ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion_pcie_lock, flags); - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); + return ret; +} - orion_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { - /* extended register space */ - pcie_addr = ORION_PCIE_WA_VIRT_BASE; - pcie_addr |= PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where); - *val = orion_read(pcie_addr); - } else - *val = orion_read(PCIE_CONF_DATA); +static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + int ret; - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } - spin_unlock_irqrestore(&orion_pcie_lock, flags); + /* + * We only support access to the non-extended configuration + * space when using the WA access method (or we would have to + * sacrifice 256M of CPU virtual address space.) + */ + if (where >= 0x100) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } - return PCIBIOS_SUCCESSFUL; -} + ret = orion_pcie_rd_conf_wa((void __iomem *)ORION_PCIE_WA_VIRT_BASE, + bus, devfn, where, size, val); + return ret; +} -static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 val) +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) { unsigned long flags; int ret; - if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) return PCIBIOS_DEVICE_NOT_FOUND; spin_lock_irqsave(&orion_pcie_lock, flags); - - ret = PCIBIOS_SUCCESSFUL; - - orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) | - PCIE_CONF_DEV(PCI_SLOT(devfn)) | - PCIE_CONF_FUNC(PCI_FUNC(devfn)) | - PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCIE_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCIE_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCIE_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - + ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); spin_unlock_irqrestore(&orion_pcie_lock, flags); return ret; } -struct pci_ops orion_pcie_ops = { - .read = orion_pcie_rd_conf, - .write = orion_pcie_wr_conf, +struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, }; -static int orion_pcie_setup(struct pci_sys_data *sys) +static int pcie_setup(struct pci_sys_data *sys) { struct resource *res; + int dev; /* - * Point PCIe unit MBUS decode windows to DRAM space. - */ - orion_setup_pcie_wins(&orion_mbus_dram_info); - - /* - * Master + Slave enable + * Generic PCIe unit setup. */ - orion_pcie_master_slave_enable(); + orion_pcie_setup(PCIE_BASE, &orion_mbus_dram_info); /* - * Enable interrupts lines A-D + * Check whether to apply Orion-1/Orion-NAS PCIe config + * read transaction workaround. */ - orion_pcie_enable_interrupts(); + dev = orion_pcie_dev_id(PCIE_BASE); + if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { + printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " + "read transaction workaround\n"); + pcie_ops.read = pcie_rd_conf_wa; + } /* - * Request resource + * Request resources. */ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) - panic("orion_pci_setup unable to alloc resources"); + panic("pcie_setup unable to alloc resources"); /* * IORESOURCE_IO @@ -417,19 +266,19 @@ static int orion_pcie_setup(struct pci_sys_data *sys) */ static DEFINE_SPINLOCK(orion_pci_lock); -u32 orion_pci_local_bus_nr(void) +int orion_pci_local_bus_nr(void) { u32 conf = orion_read(PCI_P2P_CONF); return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); } -static u32 orion_pci_local_dev_nr(void) +static int orion_pci_local_dev_nr(void) { u32 conf = orion_read(PCI_P2P_CONF); return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS); } -static int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, +static int orion_pci_hw_rd_conf(int bus, int dev, u32 func, u32 where, u32 size, u32 *val) { unsigned long flags; @@ -451,7 +300,7 @@ static int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, return PCIBIOS_SUCCESSFUL; } -static int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, +static int orion_pci_hw_wr_conf(int bus, int dev, u32 func, u32 where, u32 size, u32 val) { unsigned long flags; @@ -508,7 +357,7 @@ static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, PCI_FUNC(devfn), where, size, val); } -struct pci_ops orion_pci_ops = { +struct pci_ops pci_ops = { .read = orion_pci_rd_conf, .write = orion_pci_wr_conf, }; @@ -540,7 +389,8 @@ static void orion_pci_set_bus_nr(int nr) static void orion_pci_master_slave_enable(void) { - u32 bus_nr, dev_nr, func, reg, val; + int bus_nr, dev_nr, func, reg; + u32 val; bus_nr = orion_pci_local_bus_nr(); dev_nr = orion_pci_local_dev_nr(); @@ -554,8 +404,8 @@ static void orion_pci_master_slave_enable(void) static void orion_setup_pci_wins(struct mbus_dram_target_info *dram) { u32 win_enable; - u32 bus; - u32 dev; + int bus; + int dev; int i; /* @@ -611,7 +461,7 @@ static void orion_setup_pci_wins(struct mbus_dram_target_info *dram) orion_setbits(PCI_ADDR_DECODE_CTRL, 1); } -static int orion_pci_setup(struct pci_sys_data *sys) +static int pci_setup(struct pci_sys_data *sys) { struct resource *res; @@ -635,7 +485,7 @@ static int orion_pci_setup(struct pci_sys_data *sys) */ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); if (!res) - panic("orion_pci_setup unable to alloc resources"); + panic("pci_setup unable to alloc resources"); /* * IORESOURCE_IO @@ -674,16 +524,11 @@ int orion_pci_sys_setup(int nr, struct pci_sys_data *sys) int ret = 0; if (nr == 0) { - /* - * PCIE setup - */ - orion_pcie_set_bus_nr(0); - ret = orion_pcie_setup(sys); + orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); + ret = pcie_setup(sys); } else if (nr == 1) { - /* - * PCI setup - */ - ret = orion_pci_setup(sys); + orion_pci_set_bus_nr(sys->busnr); + ret = pci_setup(sys); } return ret; @@ -691,31 +536,15 @@ int orion_pci_sys_setup(int nr, struct pci_sys_data *sys) struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) { - struct pci_ops *ops; struct pci_bus *bus; - if (nr == 0) { - u32 pci_bus; - /* - * PCIE scan - */ - ops = &orion_pcie_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); - /* - * Set local PCI bus number to follow PCIE bridges (if any) - */ - pci_bus = bus->number + bus->subordinate - bus->secondary + 1; - orion_pci_set_bus_nr(pci_bus); + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); } else if (nr == 1) { - /* - * PCI scan - */ - ops = &orion_pci_ops; - bus = pci_scan_bus(sys->busnr, ops, sys); + bus = pci_scan_bus(sys->busnr, &pci_ops, sys); } else { - BUG(); bus = NULL; + BUG(); } return bus; diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index ea4ce342a19..b33ecb60183 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o +obj-y := irq.o pcie.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c new file mode 100644 index 00000000000..f01966a330e --- /dev/null +++ b/arch/arm/plat-orion/pcie.c @@ -0,0 +1,245 @@ +/* + * arch/arm/plat-orion/pcie.c + * + * Marvell Orion SoC PCIe handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +/* + * PCIe unit register offsets. + */ +#define PCIE_DEV_ID_OFF 0x0000 +#define PCIE_CMD_OFF 0x0004 +#define PCIE_DEV_REV_OFF 0x0008 +#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3)) +#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3)) +#define PCIE_HEADER_LOG_4_OFF 0x0128 +#define PCIE_BAR_CTRL_OFF(n) (0x1804 + ((n - 1) * 4)) +#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4)) +#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4)) +#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4)) +#define PCIE_WIN5_CTRL_OFF 0x1880 +#define PCIE_WIN5_BASE_OFF 0x1884 +#define PCIE_WIN5_REMAP_OFF 0x188c +#define PCIE_CONF_ADDR_OFF 0x18f8 +#define PCIE_CONF_ADDR_EN 0x80000000 +#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc)) +#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16) +#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11) +#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8) +#define PCIE_CONF_DATA_OFF 0x18fc +#define PCIE_MASK_OFF 0x1910 +#define PCIE_CTRL_OFF 0x1a00 +#define PCIE_STAT_OFF 0x1a04 +#define PCIE_STAT_DEV_OFFS 20 +#define PCIE_STAT_DEV_MASK 0x1f +#define PCIE_STAT_BUS_OFFS 8 +#define PCIE_STAT_BUS_MASK 0xff +#define PCIE_STAT_LINK_DOWN 1 + + +u32 __init orion_pcie_dev_id(void __iomem *base) +{ + return readl(base + PCIE_DEV_ID_OFF) >> 16; +} + +u32 __init orion_pcie_rev(void __iomem *base) +{ + return readl(base + PCIE_DEV_REV_OFF) & 0xff; +} + +int __init orion_pcie_link_up(void __iomem *base) +{ + return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); +} + +int __init orion_pcie_get_local_bus_nr(void __iomem *base) +{ + u32 stat = readl(base + PCIE_STAT_OFF); + + return (stat >> PCIE_STAT_BUS_OFFS) & PCIE_STAT_BUS_MASK; +} + +void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr) +{ + u32 stat; + + stat = readl(base + PCIE_STAT_OFF); + stat &= ~(PCIE_STAT_BUS_MASK << PCIE_STAT_BUS_OFFS); + stat |= nr << PCIE_STAT_BUS_OFFS; + writel(stat, base + PCIE_STAT_OFF); +} + +/* + * Setup PCIE BARs and Address Decode Wins: + * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks + * WIN[0-3] -> DRAM bank[0-3] + */ +static void __init orion_pcie_setup_wins(void __iomem *base, + struct mbus_dram_target_info *dram) +{ + u32 size; + int i; + + /* + * First, disable and clear BARs and windows. + */ + for (i = 1; i <= 2; i++) { + writel(0, base + PCIE_BAR_CTRL_OFF(i)); + writel(0, base + PCIE_BAR_LO_OFF(i)); + writel(0, base + PCIE_BAR_HI_OFF(i)); + } + + for (i = 0; i < 5; i++) { + writel(0, base + PCIE_WIN04_CTRL_OFF(i)); + writel(0, base + PCIE_WIN04_BASE_OFF(i)); + writel(0, base + PCIE_WIN04_REMAP_OFF(i)); + } + + writel(0, base + PCIE_WIN5_CTRL_OFF); + writel(0, base + PCIE_WIN5_BASE_OFF); + writel(0, base + PCIE_WIN5_REMAP_OFF); + + /* + * Setup windows for DDR banks. Count total DDR size on the fly. + */ + size = 0; + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + + writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i)); + writel(0, base + PCIE_WIN04_REMAP_OFF(i)); + writel(((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + base + PCIE_WIN04_CTRL_OFF(i)); + + size += cs->size; + } + + /* + * Setup BAR[1] to all DRAM banks. + */ + writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1)); + writel(0, base + PCIE_BAR_HI_OFF(1)); + writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1)); +} + +void __init orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram) +{ + u16 cmd; + u32 mask; + + /* + * Point PCIe unit MBUS decode windows to DRAM space. + */ + orion_pcie_setup_wins(base, dram); + + /* + * Master + slave enable. + */ + cmd = readw(base + PCIE_CMD_OFF); + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + cmd |= PCI_COMMAND_MASTER; + writew(cmd, base + PCIE_CMD_OFF); + + /* + * Enable interrupt lines A-D. + */ + mask = readl(base + PCIE_MASK_OFF); + mask |= 0x0f000000; + writel(mask, base + PCIE_MASK_OFF); +} + +int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + *val = readl(base + PCIE_CONF_DATA_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + *val = readl(base + PCIE_CONF_DATA_OFF); + + if (bus->number != orion_pcie_get_local_bus_nr(base) || + PCI_FUNC(devfn) != 0) + *val = readl(base + PCIE_HEADER_LOG_4_OFF); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + *val = readl(wa_base + (PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where))); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val) +{ + int ret = PCIBIOS_SUCCESSFUL; + + writel(PCIE_CONF_BUS(bus->number) | + PCIE_CONF_DEV(PCI_SLOT(devfn)) | + PCIE_CONF_FUNC(PCI_FUNC(devfn)) | + PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN, + base + PCIE_CONF_ADDR_OFF); + + if (size == 4) { + writel(val, base + PCIE_CONF_DATA_OFF); + } else if (size == 2) { + writew(val, base + PCIE_CONF_DATA_OFF + (where & 3)); + } else if (size == 1) { + writeb(val, base + PCIE_CONF_DATA_OFF + (where & 3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + return ret; +} diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h new file mode 100644 index 00000000000..6434ac685d2 --- /dev/null +++ b/include/asm-arm/plat-orion/pcie.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/plat-orion/pcie.h + * + * Marvell Orion SoC PCIe handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_PCIE_H +#define __ASM_PLAT_ORION_PCIE_H + +u32 orion_pcie_dev_id(void __iomem *base); +u32 orion_pcie_rev(void __iomem *base); +int orion_pcie_link_up(void __iomem *base); +int orion_pcie_get_local_bus_nr(void __iomem *base); +void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); +void orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram); +int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val); + + +#endif -- cgit v1.2.3-70-g09d2 From 2bac1de2031aa4cad88a437d4410ec289da4f7dc Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:40 -0400 Subject: plat-orion: share time handling code Split off Orion time handling code into plat-orion/. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/Makefile | 2 +- arch/arm/mach-orion/common.c | 16 +++ arch/arm/mach-orion/common.h | 6 +- arch/arm/mach-orion/time.c | 181 --------------------------------- arch/arm/plat-orion/Makefile | 2 +- arch/arm/plat-orion/time.c | 203 +++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-orion/orion.h | 7 +- include/asm-arm/arch-orion/timex.h | 3 +- include/asm-arm/plat-orion/time.h | 17 ++++ 9 files changed, 245 insertions(+), 192 deletions(-) delete mode 100644 arch/arm/mach-orion/time.c create mode 100644 arch/arm/plat-orion/time.c create mode 100644 include/asm-arm/plat-orion/time.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile index f91d937a73e..d894caa5060 100644 --- a/arch/arm/mach-orion/Makefile +++ b/arch/arm/mach-orion/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o pci.o gpio.o irq.o time.o +obj-y += common.o addr-map.o pci.o gpio.o irq.o obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index a32fe8e108b..86d7f7ccfae 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -23,8 +23,11 @@ #include #include #include +#include #include +#include #include +#include #include "common.h" /***************************************************************************** @@ -295,6 +298,19 @@ void __init orion_sata_init(struct mv_sata_platform_data *sata_data) platform_device_register(&orion_sata); } +/***************************************************************************** + * Time handling + ****************************************************************************/ + +static void orion_timer_init(void) +{ + orion_time_init(IRQ_ORION_BRIDGE, ORION_TCLK); +} + +struct sys_timer orion_timer = { + .init = orion_timer_init, +}; + /***************************************************************************** * General ****************************************************************************/ diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 9a5afefac4d..3898e1b78ee 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -8,6 +8,7 @@ void __init orion_map_io(void); void __init orion_init_irq(void); void __init orion_init(void); +extern struct sys_timer orion_timer; /* * Enumerations and functions for Orion windows mapping. Used by Orion core @@ -56,11 +57,6 @@ struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); void __init orion_gpio_set_valid_pins(u32 pins); void gpio_display(void); /* debug */ -/* - * Orion system timer (clocksource + clockevnt, /mach-orion/time.c) - */ -extern struct sys_timer orion_timer; - /* * Pull in Orion Ethernet platform_data, used by machine-setup */ diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c deleted file mode 100644 index bd4262da4f4..00000000000 --- a/arch/arm/mach-orion/time.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * arch/arm/mach-orion/time.c - * - * Core time functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include "common.h" - -/* - * Timer0: clock_event_device, Tick. - * Timer1: clocksource, Free running. - * WatchDog: Not used. - * - * Timers are counting down. - */ -#define CLOCKEVENT 0 -#define CLOCKSOURCE 1 - -/* - * Timers bits - */ -#define BRIDGE_INT_TIMER(x) (1 << ((x) + 1)) -#define TIMER_EN(x) (1 << ((x) * 2)) -#define TIMER_RELOAD_EN(x) (1 << (((x) * 2) + 1)) -#define BRIDGE_INT_TIMER_WD (1 << 3) -#define TIMER_WD_EN (1 << 4) -#define TIMER_WD_RELOAD_EN (1 << 5) - -static cycle_t orion_clksrc_read(void) -{ - return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE))); -} - -static struct clocksource orion_clksrc = { - .name = "orion_clocksource", - .shift = 20, - .rating = 300, - .read = orion_clksrc_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static int -orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) -{ - unsigned long flags; - - if (delta == 0) - return -ETIME; - - local_irq_save(flags); - - /* - * Clear and enable timer interrupt bit - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - - /* - * Setup new timer value - */ - orion_write(TIMER_VAL(CLOCKEVENT), delta); - - /* - * Disable auto reload and kickoff the timer - */ - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT)); - - local_irq_restore(flags); - - return 0; -} - -static void -orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) -{ - unsigned long flags; - - local_irq_save(flags); - - if (mode == CLOCK_EVT_MODE_PERIODIC) { - /* - * Setup latch cycles in timer and enable reload interrupt. - */ - orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH); - orion_write(TIMER_VAL(CLOCKEVENT), LATCH); - orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } else { - /* - * Disable timer and interrupt - */ - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) | - TIMER_EN(CLOCKEVENT)); - } - - local_irq_restore(flags); -} - -static struct clock_event_device orion_clkevt = { - .name = "orion_tick", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .rating = 300, - .cpumask = CPU_MASK_CPU0, - .set_next_event = orion_clkevt_next_event, - .set_mode = orion_clkevt_mode, -}; - -static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) -{ - /* - * Clear cause bit and do event - */ - orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT)); - orion_clkevt.event_handler(&orion_clkevt); - return IRQ_HANDLED; -} - -static struct irqaction orion_timer_irq = { - .name = "orion_tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = orion_timer_interrupt -}; - -static void orion_timer_init(void) -{ - /* - * Setup clocksource free running timer (no interrupt on reload) - */ - orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff); - orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff); - orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE)); - orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) | - TIMER_EN(CLOCKSOURCE)); - - /* - * Register clocksource - */ - orion_clksrc.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift); - - clocksource_register(&orion_clksrc); - - /* - * Connect and enable tick handler - */ - setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq); - - /* - * Register clockevent - */ - orion_clkevt.mult = - div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift); - orion_clkevt.max_delta_ns = - clockevent_delta2ns(0xfffffffe, &orion_clkevt); - orion_clkevt.min_delta_ns = - clockevent_delta2ns(1, &orion_clkevt); - - clockevents_register_device(&orion_clkevt); -} - -struct sys_timer orion_timer = { - .init = orion_timer_init, -}; diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile index b33ecb60183..198f3dde2be 100644 --- a/arch/arm/plat-orion/Makefile +++ b/arch/arm/plat-orion/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o pcie.o +obj-y := irq.o pcie.o time.o obj-m := obj-n := obj- := diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c new file mode 100644 index 00000000000..28b5285446e --- /dev/null +++ b/arch/arm/plat-orion/time.c @@ -0,0 +1,203 @@ +/* + * arch/arm/plat-orion/time.c + * + * Marvell Orion SoC timer handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Timer 0 is used as free-running clocksource, while timer 1 is + * used as clock_event_device. + */ + +#include +#include +#include +#include +#include +#include + +/* + * Number of timer ticks per jiffy. + */ +static u32 ticks_per_jiffy; + + +/* + * Timer block registers. + */ +#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000) +#define TIMER0_EN 0x0001 +#define TIMER0_RELOAD_EN 0x0002 +#define TIMER1_EN 0x0004 +#define TIMER1_RELOAD_EN 0x0008 +#define TIMER0_RELOAD (TIMER_VIRT_BASE + 0x0010) +#define TIMER0_VAL (TIMER_VIRT_BASE + 0x0014) +#define TIMER1_RELOAD (TIMER_VIRT_BASE + 0x0018) +#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c) + + +/* + * Clocksource handling. + */ +static cycle_t orion_clksrc_read(void) +{ + return 0xffffffff - readl(TIMER0_VAL); +} + +static struct clocksource orion_clksrc = { + .name = "orion_clocksource", + .shift = 20, + .rating = 300, + .read = orion_clksrc_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + + +/* + * Clockevent handling. + */ +static int +orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev) +{ + unsigned long flags; + u32 u; + + if (delta == 0) + return -ETIME; + + local_irq_save(flags); + + /* + * Clear and enable clockevent timer interrupt. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + + u = readl(BRIDGE_MASK); + u |= BRIDGE_INT_TIMER1; + writel(u, BRIDGE_MASK); + + /* + * Setup new clockevent timer value. + */ + writel(delta, TIMER1_VAL); + + /* + * Enable the timer. + */ + u = readl(TIMER_CTRL); + u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN; + writel(u, TIMER_CTRL); + + local_irq_restore(flags); + + return 0; +} + +static void +orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + unsigned long flags; + u32 u; + + local_irq_save(flags); + if (mode == CLOCK_EVT_MODE_PERIODIC) { + /* + * Setup timer to fire at 1/HZ intervals. + */ + writel(ticks_per_jiffy - 1, TIMER1_RELOAD); + writel(ticks_per_jiffy - 1, TIMER1_VAL); + + /* + * Enable timer interrupt. + */ + u = readl(BRIDGE_MASK); + writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK); + + /* + * Enable timer. + */ + u = readl(TIMER_CTRL); + writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL); + } else { + /* + * Disable timer. + */ + u = readl(TIMER_CTRL); + writel(u & ~TIMER1_EN, TIMER_CTRL); + + /* + * Disable timer interrupt. + */ + u = readl(BRIDGE_MASK); + writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK); + + /* + * ACK pending timer interrupt. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + + } + local_irq_restore(flags); +} + +static struct clock_event_device orion_clkevt = { + .name = "orion_tick", + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .shift = 32, + .rating = 300, + .cpumask = CPU_MASK_CPU0, + .set_next_event = orion_clkevt_next_event, + .set_mode = orion_clkevt_mode, +}; + +static irqreturn_t orion_timer_interrupt(int irq, void *dev_id) +{ + /* + * ACK timer interrupt and call event handler. + */ + writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE); + orion_clkevt.event_handler(&orion_clkevt); + + return IRQ_HANDLED; +} + +static struct irqaction orion_timer_irq = { + .name = "orion_tick", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = orion_timer_interrupt +}; + +void __init orion_time_init(unsigned int irq, unsigned int tclk) +{ + u32 u; + + ticks_per_jiffy = (tclk + HZ/2) / HZ; + + + /* + * Setup free-running clocksource timer (interrupts + * disabled.) + */ + writel(0xffffffff, TIMER0_VAL); + writel(0xffffffff, TIMER0_RELOAD); + u = readl(BRIDGE_MASK); + writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK); + u = readl(TIMER_CTRL); + writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL); + orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); + clocksource_register(&orion_clksrc); + + + /* + * Setup clockevent timer (interrupt-driven.) + */ + setup_irq(irq, &orion_timer_irq); + orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift); + orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt); + orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt); + clockevents_register_device(&orion_clkevt); +} diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h index 673a418a741..884f3e2717d 100644 --- a/include/asm-arm/arch-orion/orion.h +++ b/include/asm-arm/arch-orion/orion.h @@ -137,11 +137,12 @@ #define POWER_MNG_CTRL_REG ORION_BRIDGE_REG(0x11C) #define BRIDGE_CAUSE ORION_BRIDGE_REG(0x110) #define BRIDGE_MASK ORION_BRIDGE_REG(0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 #define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200) #define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204) -#define TIMER_CTRL ORION_BRIDGE_REG(0x300) -#define TIMER_VAL(x) ORION_BRIDGE_REG(0x314 + ((x) * 8)) -#define TIMER_VAL_RELOAD(x) ORION_BRIDGE_REG(0x310 + ((x) * 8)) + +#define TIMER_VIRT_BASE (ORION_BRIDGE_VIRT_BASE | 0x300) #ifndef __ASSEMBLY__ diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h index 26c2c91eecf..cc0fc7075eb 100644 --- a/include/asm-arm/arch-orion/timex.h +++ b/include/asm-arm/arch-orion/timex.h @@ -8,5 +8,6 @@ * warranty of any kind, whether express or implied. */ +#define CLOCK_TICK_RATE (100 * HZ) + #define ORION_TCLK 166666667 -#define CLOCK_TICK_RATE ORION_TCLK diff --git a/include/asm-arm/plat-orion/time.h b/include/asm-arm/plat-orion/time.h new file mode 100644 index 00000000000..0e85cc8f44d --- /dev/null +++ b/include/asm-arm/plat-orion/time.h @@ -0,0 +1,17 @@ +/* + * include/asm-arm/plat-orion/time.h + * + * Marvell Orion SoC time handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_TIME_H +#define __ASM_PLAT_ORION_TIME_H + +void orion_time_init(unsigned int irq, unsigned int tclk); + + +#endif -- cgit v1.2.3-70-g09d2 From 705a752162768fed3e2c26fba5bffdd3a3bd04f2 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:40 -0400 Subject: plat-orion: make ehci-orion available for all Orion families Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/common.c | 1 + drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ehci-orion.c | 3 +-- include/asm-arm/arch-orion/platform.h | 8 -------- include/asm-arm/plat-orion/ehci-orion.h | 19 +++++++++++++++++++ 5 files changed, 22 insertions(+), 11 deletions(-) create mode 100644 include/asm-arm/plat-orion/ehci-orion.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 86d7f7ccfae..1e124b7b0bd 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include "common.h" diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 46ee7f4c091..85074cb36f3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1033,7 +1033,7 @@ MODULE_LICENSE ("GPL"); #define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver #endif -#ifdef CONFIG_ARCH_ORION +#ifdef CONFIG_PLAT_ORION #include "ehci-orion.c" #define PLATFORM_DRIVER ehci_orion_driver #endif diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 0f0eb89c8cf..d187d031374 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -12,8 +12,7 @@ #include #include #include -#include -#include +#include #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/arch-orion/platform.h index 0e33fe536ef..4e09c6c1af4 100644 --- a/include/asm-arm/arch-orion/platform.h +++ b/include/asm-arm/arch-orion/platform.h @@ -11,14 +11,6 @@ #ifndef __ASM_ARCH_PLATFORM_H__ #define __ASM_ARCH_PLATFORM_H__ -/* - * Orion EHCI platform driver data. - */ -struct orion_ehci_data { - struct mbus_dram_target_info *dram; -}; - - /* * Device bus NAND private data */ diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/include/asm-arm/plat-orion/ehci-orion.h new file mode 100644 index 00000000000..785705651e2 --- /dev/null +++ b/include/asm-arm/plat-orion/ehci-orion.h @@ -0,0 +1,19 @@ +/* + * include/asm-arm/plat-orion/ehci-orion.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_EHCI_ORION_H +#define __ASM_PLAT_ORION_EHCI_ORION_H + +#include + +struct orion_ehci_data { + struct mbus_dram_target_info *dram; +}; + + +#endif -- cgit v1.2.3-70-g09d2 From 5d4294c524fc53746b5ec138d2e90f9d34d754b0 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:40 -0400 Subject: plat-orion: make orion_nand available for all Orion families Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/common.c | 2 +- arch/arm/mach-orion/db88f5281-setup.c | 2 +- arch/arm/mach-orion/dns323-setup.c | 1 - arch/arm/mach-orion/kurobox_pro-setup.c | 2 +- arch/arm/mach-orion/rd88f5182-setup.c | 1 - arch/arm/mach-orion/ts209-setup.c | 1 - drivers/mtd/nand/Kconfig | 2 +- drivers/mtd/nand/orion_nand.c | 2 +- include/asm-arm/arch-orion/platform.h | 26 -------------------------- include/asm-arm/plat-orion/orion_nand.h | 24 ++++++++++++++++++++++++ 10 files changed, 29 insertions(+), 34 deletions(-) delete mode 100644 include/asm-arm/arch-orion/platform.h create mode 100644 include/asm-arm/plat-orion/orion_nand.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 1e124b7b0bd..1b5ed72899e 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -26,8 +26,8 @@ #include #include #include -#include #include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c index 5ef44e1a2d3..5cf65fedfae 100644 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ b/arch/arm/mach-orion/db88f5281-setup.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c index 076e155ad51..38593784d76 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion/dns323-setup.c @@ -26,7 +26,6 @@ #include #include #include -#include #include "common.h" #define DNS323_GPIO_LED_RIGHT_AMBER 1 diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index 785a07bdf1e..feae4839830 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c index e851b8ca5ac..e3cc757a4ca 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion/rd88f5182-setup.c @@ -25,7 +25,6 @@ #include #include #include -#include #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index 45764dad16d..86583e4856a 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -27,7 +27,6 @@ #include #include #include -#include #include "common.h" #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 4a3c6759492..959fb86cda0 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -314,7 +314,7 @@ config MTD_ALAUDA config MTD_NAND_ORION tristate "NAND Flash support for Marvell Orion SoC" - depends on ARCH_ORION && MTD_NAND + depends on PLAT_ORION && MTD_NAND help This enables the NAND flash controller on Orion machines. diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 9162cca0182..ec5ad28b237 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -18,8 +18,8 @@ #include #include #include -#include #include +#include #ifdef CONFIG_MTD_CMDLINE_PARTS static const char *part_probes[] = { "cmdlinepart", NULL }; diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/arch-orion/platform.h deleted file mode 100644 index 4e09c6c1af4..00000000000 --- a/include/asm-arm/arch-orion/platform.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * asm-arm/arch-orion/platform.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ - -/* - * Device bus NAND private data - */ -struct orion_nand_data { - struct mtd_partition *parts; - u32 nr_parts; - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 width; /* buswidth */ -}; - - -#endif diff --git a/include/asm-arm/plat-orion/orion_nand.h b/include/asm-arm/plat-orion/orion_nand.h new file mode 100644 index 00000000000..ffd3852a0dd --- /dev/null +++ b/include/asm-arm/plat-orion/orion_nand.h @@ -0,0 +1,24 @@ +/* + * include/asm-arm/plat-orion/orion_nand.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_ORION_NAND_H +#define __ASM_PLAT_ORION_ORION_NAND_H + +/* + * Device bus NAND private data + */ +struct orion_nand_data { + struct mtd_partition *parts; + u32 nr_parts; + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 width; /* buswidth */ +}; + + +#endif -- cgit v1.2.3-70-g09d2 From da14d88e90d476b315e5e9c3e3ffa940cb670c6d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:40 -0400 Subject: Orion: describe physical address map Include a table describing our physical address map in orion.h. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- include/asm-arm/arch-orion/orion.h | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h index 884f3e2717d..95f67081bb9 100644 --- a/include/asm-arm/arch-orion/orion.h +++ b/include/asm-arm/arch-orion/orion.h @@ -15,13 +15,25 @@ #define __ASM_ARCH_ORION_H__ /***************************************************************************** - * Orion Address Map + * Orion Address Maps + * + * phys + * e0000000 PCIe MEM space + * e8000000 PCI MEM space + * f0000000 PCIe WA space (Orion-1/Orion-NAS only) + * f1000000 on-chip peripheral registers + * f2000000 PCIe I/O space + * f2100000 PCI I/O space + * f4000000 device bus mappings (boot) + * fa000000 device bus mappings (cs0) + * fa800000 device bus mappings (cs2) + * fc000000 device bus mappings (cs0/cs1) * * virt phys size * fdd00000 f1000000 1M on-chip peripheral registers * fde00000 f2000000 1M PCIe I/O space * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-NAS only) + * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) ****************************************************************************/ #define ORION_REGS_PHYS_BASE 0xf1000000 #define ORION_REGS_VIRT_BASE 0xfdd00000 @@ -37,7 +49,7 @@ #define ORION_PCI_IO_BUS_BASE 0x00100000 #define ORION_PCI_IO_SIZE SZ_1M -/* Relevant only for Orion-NAS */ +/* Relevant only for Orion-1/Orion-NAS */ #define ORION_PCIE_WA_PHYS_BASE 0xf0000000 #define ORION_PCIE_WA_VIRT_BASE 0xfe000000 #define ORION_PCIE_WA_SIZE SZ_16M -- cgit v1.2.3-70-g09d2 From b590bc5cd0ced1019f02ca7c9b8594482304987f Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:41 -0400 Subject: Orion: move I/O macros out of orion.h Move the Orion register accessor macros out of orion.h, to prevent them from ending up in the decompressor image (Orion uncompress.h includes orion.h.) Move them into io.h, which seems a better place for this kind of stuff. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/addr-map.c | 1 + arch/arm/mach-orion/gpio.c | 1 + arch/arm/mach-orion/irq.c | 1 + include/asm-arm/arch-orion/io.h | 15 +++++++++++++++ include/asm-arm/arch-orion/orion.h | 20 +------------------- 5 files changed, 19 insertions(+), 19 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index ca641db6214..ecca987b57e 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -14,6 +14,7 @@ #include #include #include +#include #include "common.h" /* diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c index f713818c66a..5a7d9cc9b80 100644 --- a/arch/arm/mach-orion/gpio.c +++ b/arch/arm/mach-orion/gpio.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c index 855793afcca..dc8cb15a817 100644 --- a/arch/arm/mach-orion/irq.c +++ b/arch/arm/mach-orion/irq.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include "common.h" diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h index e0b8c39b916..42abd297ae5 100644 --- a/include/asm-arm/arch-orion/io.h +++ b/include/asm-arm/arch-orion/io.h @@ -24,4 +24,19 @@ static inline void __iomem *__io(unsigned long addr) #define __io(a) __io(a) #define __mem_pci(a) (a) + +/***************************************************************************** + * Helpers to access Orion registers + ****************************************************************************/ +#define orion_read(r) __raw_readl(r) +#define orion_write(r, val) __raw_writel(val, r) + +/* + * These are not preempt-safe. Locks, if needed, must be taken + * care of by the caller. + */ +#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask)) +#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask)) + + #endif diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h index 95f67081bb9..d0b32c379ae 100644 --- a/include/asm-arm/arch-orion/orion.h +++ b/include/asm-arm/arch-orion/orion.h @@ -156,23 +156,5 @@ #define TIMER_VIRT_BASE (ORION_BRIDGE_VIRT_BASE | 0x300) -#ifndef __ASSEMBLY__ -/******************************************************************************* - * Helpers to access Orion registers - ******************************************************************************/ -#include -#include - -#define orion_read(r) __raw_readl(r) -#define orion_write(r, val) __raw_writel(val, r) - -/* - * These are not preempt safe. Locks, if needed, must be taken care by caller. - */ -#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask)) -#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask)) - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_ORION_H__ */ +#endif -- cgit v1.2.3-70-g09d2 From 1419468ab548f990b172740d77b5c1032a790114 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:41 -0400 Subject: Orion: only map peripheral register space once Save some TLB entries by making ioremap() return pointers into the boot-time Orion peripheral iotable mapping whenever someone tries to ioremap any part of the Orion peripheral register space. Signed-off-by: Lennert Buytenhek Reviewed-by: Nicolas Pitre Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- include/asm-arm/arch-orion/io.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h index 42abd297ae5..486dc04d764 100644 --- a/include/asm-arm/arch-orion/io.h +++ b/include/asm-arm/arch-orion/io.h @@ -16,11 +16,37 @@ #define IO_SPACE_LIMIT 0xffffffff #define IO_SPACE_REMAP ORION_PCI_SYS_IO_BASE +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + + if (mtype == MT_DEVICE && size && paddr >= ORION_REGS_PHYS_BASE && + paddr + size <= ORION_REGS_PHYS_BASE + ORION_REGS_SIZE) { + retval = (void __iomem *)ORION_REGS_VIRT_BASE + + (paddr - ORION_REGS_PHYS_BASE); + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)ORION_REGS_VIRT_BASE || + addr >= (void __iomem *)(ORION_REGS_VIRT_BASE + ORION_REGS_SIZE)) + __iounmap(addr); +} + static inline void __iomem *__io(unsigned long addr) { return (void __iomem *)addr; } +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) #define __io(a) __io(a) #define __mem_pci(a) (a) -- cgit v1.2.3-70-g09d2 From 159ffb3a04f6bc619643af680df406faafd0199d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:41 -0400 Subject: Orion: general cleanup Various Orion cleanups: - Unify GPL license banner format across all files. - Unify naming of .h double inclusion guard preprocessor macros. - Unify spelling of "PCIe" (variants seen: PCIE, PCIe, PCI-EX.) - Various typo fixes. - Remove __init attributes from prototypes declared in headers. - Remove trailing comments from #endif statements. - Mark a couple of locally-used-only structs static. Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion/addr-map.c | 8 ++++---- arch/arm/mach-orion/common.c | 6 +++--- arch/arm/mach-orion/common.h | 19 ++++++++++--------- arch/arm/mach-orion/db88f5281-setup.c | 4 ++-- arch/arm/mach-orion/gpio.c | 4 ++-- arch/arm/mach-orion/irq.c | 2 +- arch/arm/mach-orion/kurobox_pro-setup.c | 4 ++-- arch/arm/mach-orion/pci.c | 32 ++++++++++++++++---------------- arch/arm/mach-orion/rd88f5182-setup.c | 4 ++-- include/asm-arm/arch-orion/debug-macro.S | 2 +- include/asm-arm/arch-orion/hardware.h | 4 ++-- include/asm-arm/arch-orion/io.h | 8 ++++---- include/asm-arm/arch-orion/irqs.h | 7 ++++--- include/asm-arm/arch-orion/memory.h | 5 +++-- include/asm-arm/arch-orion/orion.h | 7 +++---- include/asm-arm/arch-orion/system.h | 5 +++-- include/asm-arm/arch-orion/timex.h | 4 ++-- include/asm-arm/arch-orion/uncompress.h | 4 ++-- 18 files changed, 66 insertions(+), 63 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index ecca987b57e..738de617e3c 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -5,8 +5,8 @@ * * Maintainer: Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -45,9 +45,9 @@ * Generic Address Decode Windows bit settings */ #define TARGET_DDR 0 +#define TARGET_DEV_BUS 1 #define TARGET_PCI 3 #define TARGET_PCIE 4 -#define TARGET_DEV_BUS 1 #define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ ((n) == 1) ? 0xd : \ ((n) == 2) ? 0xb : \ @@ -64,7 +64,7 @@ #define WIN_EN 1 /* - * Helpers to get DDR banks info + * Helpers to get DDR bank info */ #define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) #define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index aae157d360e..85c8f18268a 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -5,8 +5,8 @@ * * Maintainer: Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -363,7 +363,7 @@ void __init orion_init(void) orion_setup_eth_wins(); /* - * REgister devices + * Register devices. */ platform_device_register(&orion_uart); platform_device_register(&orion_ehci0); diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 74f23e61c40..bcc31adaca1 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -1,13 +1,13 @@ -#ifndef __ARCH_ORION_COMMON_H__ -#define __ARCH_ORION_COMMON_H__ +#ifndef __ARCH_ORION_COMMON_H +#define __ARCH_ORION_COMMON_H /* * Basic Orion init functions used early by machine-setup. */ -void __init orion_map_io(void); -void __init orion_init_irq(void); -void __init orion_init(void); +void orion_map_io(void); +void orion_init_irq(void); +void orion_init(void); extern struct sys_timer orion_timer; /* @@ -43,7 +43,7 @@ struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); * (/mach-orion/gpio.c). */ -void __init orion_gpio_set_valid_pins(u32 pins); +void orion_gpio_set_valid_pins(u32 pins); void gpio_display(void); /* debug */ /* @@ -52,7 +52,7 @@ void gpio_display(void); /* debug */ struct mv643xx_eth_platform_data; -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); +void orion_eth_init(struct mv643xx_eth_platform_data *eth_data); /* * Orion Sata platform_data, used by machine-setup @@ -60,7 +60,7 @@ void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); struct mv_sata_platform_data; -void __init orion_sata_init(struct mv_sata_platform_data *sata_data); +void orion_sata_init(struct mv_sata_platform_data *sata_data); struct machine_desc; struct meminfo; @@ -68,4 +68,5 @@ struct tag; extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, char **, struct meminfo *); -#endif /* __ARCH_ORION_COMMON_H__ */ + +#endif diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c index aad62efa1da..a0a9e4851b5 100644 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ b/arch/arm/mach-orion/db88f5281-setup.c @@ -5,8 +5,8 @@ * * Maintainer: Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c index 5a7d9cc9b80..afc7be08b30 100644 --- a/arch/arm/mach-orion/gpio.c +++ b/arch/arm/mach-orion/gpio.c @@ -5,8 +5,8 @@ * * Maintainer: Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c index dc8cb15a817..7033cc1360e 100644 --- a/arch/arm/mach-orion/irq.c +++ b/arch/arm/mach-orion/irq.c @@ -6,7 +6,7 @@ * Maintainer: Tzachi Perelstein * * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index bf7034df8a6..be417e7f423 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -3,8 +3,8 @@ * * Maintainer: Ronen Shitrit * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c index e3aab14b943..59684cc329b 100644 --- a/arch/arm/mach-orion/pci.c +++ b/arch/arm/mach-orion/pci.c @@ -1,12 +1,12 @@ /* * arch/arm/mach-orion/pci.c * - * PCI and PCIE functions for Marvell Orion System On Chip + * PCI and PCIe functions for Marvell Orion System On Chip * * Maintainer: Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -18,12 +18,12 @@ #include "common.h" /***************************************************************************** - * Orion has one PCIE controller and one PCI controller. + * Orion has one PCIe controller and one PCI controller. * - * Note1: The local PCIE bus number is '0'. The local PCI bus number - * follows the scanned PCIE bridged busses, if any. + * Note1: The local PCIe bus number is '0'. The local PCI bus number + * follows the scanned PCIe bridged busses, if any. * - * Note2: It is possible for PCI/PCIE agents to access many subsystem's + * Note2: It is possible for PCI/PCIe agents to access many subsystem's * space, by configuring BARs and Address Decode Windows, e.g. flashes on * device bus, Orion registers, etc. However this code only enable the * access to DDR banks. @@ -31,7 +31,7 @@ /***************************************************************************** - * PCIE controller + * PCIe controller ****************************************************************************/ #define PCIE_BASE ((void __iomem *)ORION_PCIE_VIRT_BASE) @@ -67,7 +67,7 @@ static int pcie_valid_config(int bus, int dev) /* - * PCIE config cycles are done by programming the PCIE_CONF_ADDR register + * PCIe config cycles are done by programming the PCIE_CONF_ADDR register * and then reading the PCIE_CONF_DATA register. Need to make sure these * transactions are atomic. */ @@ -133,7 +133,7 @@ static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, return ret; } -struct pci_ops pcie_ops = { +static struct pci_ops pcie_ops = { .read = pcie_rd_conf, .write = pcie_wr_conf, }; @@ -170,23 +170,23 @@ static int __init pcie_setup(struct pci_sys_data *sys) /* * IORESOURCE_IO */ - res[0].name = "PCI-EX I/O Space"; + res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; res[0].start = ORION_PCIE_IO_BUS_BASE; res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIE IO resource failed\n"); + panic("Request PCIe IO resource failed\n"); sys->resource[0] = &res[0]; /* * IORESOURCE_MEM */ - res[1].name = "PCI-EX Memory Space"; + res[1].name = "PCIe Memory Space"; res[1].flags = IORESOURCE_MEM; res[1].start = ORION_PCIE_MEM_PHYS_BASE; res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) - panic("Request PCIE Memory resource failed\n"); + panic("Request PCIe Memory resource failed\n"); sys->resource[1] = &res[1]; sys->resource[2] = NULL; @@ -351,7 +351,7 @@ static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, PCI_FUNC(devfn), where, size, val); } -struct pci_ops pci_ops = { +static struct pci_ops pci_ops = { .read = orion_pci_rd_conf, .write = orion_pci_wr_conf, }; @@ -508,7 +508,7 @@ static int __init pci_setup(struct pci_sys_data *sys) /***************************************************************************** - * General PCIE + PCI + * General PCIe + PCI ****************************************************************************/ static void __devinit rc_pci_fixup(struct pci_dev *dev) { diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c index 662c097ca33..f3e38ecda1c 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion/rd88f5182-setup.c @@ -5,8 +5,8 @@ * * Maintainer: Ronen Shitrit * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion/debug-macro.S index 2746220f5d8..c847f8c9250 100644 --- a/include/asm-arm/arch-orion/debug-macro.S +++ b/include/asm-arm/arch-orion/debug-macro.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-orion/debug-macro.S + * include/asm-arm/arch-orion/debug-macro.S * * Debugging macro include header * diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion/hardware.h index 65da374de73..998af6029c7 100644 --- a/include/asm-arm/arch-orion/hardware.h +++ b/include/asm-arm/arch-orion/hardware.h @@ -6,8 +6,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H #include "orion.h" diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h index 486dc04d764..23820153b61 100644 --- a/include/asm-arm/arch-orion/io.h +++ b/include/asm-arm/arch-orion/io.h @@ -3,13 +3,13 @@ * * Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H #include "orion.h" diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h index eea65ca6076..70a2420456a 100644 --- a/include/asm-arm/arch-orion/irqs.h +++ b/include/asm-arm/arch-orion/irqs.h @@ -10,8 +10,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_IRQS_H__ -#define __ASM_ARCH_IRQS_H__ +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H #include "orion.h" /* need GPIO_MAX */ @@ -58,4 +58,5 @@ #define NR_IRQS (IRQ_ORION_GPIO_START + NR_GPIO_IRQS) -#endif /* __ASM_ARCH_IRQS_H__ */ + +#endif diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion/memory.h index d954dba87ce..d9300d62a53 100644 --- a/include/asm-arm/arch-orion/memory.h +++ b/include/asm-arm/arch-orion/memory.h @@ -4,12 +4,13 @@ * Marvell Orion memory definitions */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H #define PHYS_OFFSET UL(0x00000000) #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) + #endif diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h index d0b32c379ae..01f1299472d 100644 --- a/include/asm-arm/arch-orion/orion.h +++ b/include/asm-arm/arch-orion/orion.h @@ -11,8 +11,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_ORION_H__ -#define __ASM_ARCH_ORION_H__ +#ifndef __ASM_ARCH_ORION_H +#define __ASM_ARCH_ORION_H /***************************************************************************** * Orion Address Maps @@ -91,6 +91,7 @@ #define ORION_BRIDGE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x20000) #define ORION_BRIDGE_REG(x) (ORION_BRIDGE_VIRT_BASE | (x)) +#define TIMER_VIRT_BASE (ORION_BRIDGE_VIRT_BASE | 0x300) #define ORION_PCI_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x30000) #define ORION_PCI_REG(x) (ORION_PCI_VIRT_BASE | (x)) @@ -154,7 +155,5 @@ #define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200) #define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204) -#define TIMER_VIRT_BASE (ORION_BRIDGE_VIRT_BASE | 0x300) - #endif diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion/system.h index 17704c68f90..653f992bbe6 100644 --- a/include/asm-arm/arch-orion/system.h +++ b/include/asm-arm/arch-orion/system.h @@ -3,8 +3,8 @@ * * Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -28,4 +28,5 @@ static inline void arch_reset(char mode) orion_setbits(CPU_SOFT_RESET, 1); } + #endif diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h index cc0fc7075eb..85588d9c22e 100644 --- a/include/asm-arm/arch-orion/timex.h +++ b/include/asm-arm/arch-orion/timex.h @@ -3,8 +3,8 @@ * * Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion/uncompress.h index 59f44039909..03306cdd51b 100644 --- a/include/asm-arm/arch-orion/uncompress.h +++ b/include/asm-arm/arch-orion/uncompress.h @@ -3,8 +3,8 @@ * * Tzachi Perelstein * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -- cgit v1.2.3-70-g09d2 From 9dd0b194bf6804b1998f0fe261b2606ec7b58d72 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 27 Mar 2008 14:51:41 -0400 Subject: Orion: orion -> orion5x rename Do a global s/orion/orion5x/ of the Orion 5x-specific bits (i.e. not the plat-orion bits.) Signed-off-by: Lennert Buytenhek Reviewed-by: Tzachi Perelstein Acked-by: Saeed Bishara Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/Kconfig | 7 +- arch/arm/Makefile | 2 +- arch/arm/configs/orion5x_defconfig | 1383 ++++++++++++++++++++++++++++ arch/arm/configs/orion_defconfig | 1383 ---------------------------- arch/arm/mach-orion/Kconfig | 41 - arch/arm/mach-orion/Makefile | 6 - arch/arm/mach-orion/Makefile.boot | 3 - arch/arm/mach-orion/addr-map.c | 240 ----- arch/arm/mach-orion/common.c | 391 -------- arch/arm/mach-orion/common.h | 72 -- arch/arm/mach-orion/db88f5281-setup.c | 361 -------- arch/arm/mach-orion/dns323-setup.c | 319 ------- arch/arm/mach-orion/gpio.c | 226 ----- arch/arm/mach-orion/irq.c | 211 ----- arch/arm/mach-orion/kurobox_pro-setup.c | 242 ----- arch/arm/mach-orion/pci.c | 559 ----------- arch/arm/mach-orion/rd88f5182-setup.c | 311 ------- arch/arm/mach-orion/ts209-setup.c | 358 ------- arch/arm/mach-orion5x/Kconfig | 41 + arch/arm/mach-orion5x/Makefile | 6 + arch/arm/mach-orion5x/Makefile.boot | 3 + arch/arm/mach-orion5x/addr-map.c | 240 +++++ arch/arm/mach-orion5x/common.c | 391 ++++++++ arch/arm/mach-orion5x/common.h | 72 ++ arch/arm/mach-orion5x/db88f5281-setup.c | 361 ++++++++ arch/arm/mach-orion5x/dns323-setup.c | 320 +++++++ arch/arm/mach-orion5x/gpio.c | 226 +++++ arch/arm/mach-orion5x/irq.c | 211 +++++ arch/arm/mach-orion5x/kurobox_pro-setup.c | 243 +++++ arch/arm/mach-orion5x/pci.c | 559 +++++++++++ arch/arm/mach-orion5x/rd88f5182-setup.c | 312 +++++++ arch/arm/mach-orion5x/ts209-setup.c | 359 ++++++++ arch/arm/mm/Kconfig | 2 +- include/asm-arm/arch-orion/debug-macro.S | 22 - include/asm-arm/arch-orion/dma.h | 1 - include/asm-arm/arch-orion/entry-macro.S | 31 - include/asm-arm/arch-orion/gpio.h | 28 - include/asm-arm/arch-orion/hardware.h | 21 - include/asm-arm/arch-orion/io.h | 68 -- include/asm-arm/arch-orion/irqs.h | 62 -- include/asm-arm/arch-orion/memory.h | 16 - include/asm-arm/arch-orion/orion.h | 159 ---- include/asm-arm/arch-orion/system.h | 32 - include/asm-arm/arch-orion/timex.h | 13 - include/asm-arm/arch-orion/uncompress.h | 34 - include/asm-arm/arch-orion/vmalloc.h | 5 - include/asm-arm/arch-orion5x/debug-macro.S | 22 + include/asm-arm/arch-orion5x/dma.h | 1 + include/asm-arm/arch-orion5x/entry-macro.S | 31 + include/asm-arm/arch-orion5x/gpio.h | 28 + include/asm-arm/arch-orion5x/hardware.h | 21 + include/asm-arm/arch-orion5x/io.h | 68 ++ include/asm-arm/arch-orion5x/irqs.h | 62 ++ include/asm-arm/arch-orion5x/memory.h | 16 + include/asm-arm/arch-orion5x/orion5x.h | 159 ++++ include/asm-arm/arch-orion5x/system.h | 32 + include/asm-arm/arch-orion5x/timex.h | 13 + include/asm-arm/arch-orion5x/uncompress.h | 34 + include/asm-arm/arch-orion5x/vmalloc.h | 5 + 59 files changed, 5225 insertions(+), 5220 deletions(-) create mode 100644 arch/arm/configs/orion5x_defconfig delete mode 100644 arch/arm/configs/orion_defconfig delete mode 100644 arch/arm/mach-orion/Kconfig delete mode 100644 arch/arm/mach-orion/Makefile delete mode 100644 arch/arm/mach-orion/Makefile.boot delete mode 100644 arch/arm/mach-orion/addr-map.c delete mode 100644 arch/arm/mach-orion/common.c delete mode 100644 arch/arm/mach-orion/common.h delete mode 100644 arch/arm/mach-orion/db88f5281-setup.c delete mode 100644 arch/arm/mach-orion/dns323-setup.c delete mode 100644 arch/arm/mach-orion/gpio.c delete mode 100644 arch/arm/mach-orion/irq.c delete mode 100644 arch/arm/mach-orion/kurobox_pro-setup.c delete mode 100644 arch/arm/mach-orion/pci.c delete mode 100644 arch/arm/mach-orion/rd88f5182-setup.c delete mode 100644 arch/arm/mach-orion/ts209-setup.c create mode 100644 arch/arm/mach-orion5x/Kconfig create mode 100644 arch/arm/mach-orion5x/Makefile create mode 100644 arch/arm/mach-orion5x/Makefile.boot create mode 100644 arch/arm/mach-orion5x/addr-map.c create mode 100644 arch/arm/mach-orion5x/common.c create mode 100644 arch/arm/mach-orion5x/common.h create mode 100644 arch/arm/mach-orion5x/db88f5281-setup.c create mode 100644 arch/arm/mach-orion5x/dns323-setup.c create mode 100644 arch/arm/mach-orion5x/gpio.c create mode 100644 arch/arm/mach-orion5x/irq.c create mode 100644 arch/arm/mach-orion5x/kurobox_pro-setup.c create mode 100644 arch/arm/mach-orion5x/pci.c create mode 100644 arch/arm/mach-orion5x/rd88f5182-setup.c create mode 100644 arch/arm/mach-orion5x/ts209-setup.c delete mode 100644 include/asm-arm/arch-orion/debug-macro.S delete mode 100644 include/asm-arm/arch-orion/dma.h delete mode 100644 include/asm-arm/arch-orion/entry-macro.S delete mode 100644 include/asm-arm/arch-orion/gpio.h delete mode 100644 include/asm-arm/arch-orion/hardware.h delete mode 100644 include/asm-arm/arch-orion/io.h delete mode 100644 include/asm-arm/arch-orion/irqs.h delete mode 100644 include/asm-arm/arch-orion/memory.h delete mode 100644 include/asm-arm/arch-orion/orion.h delete mode 100644 include/asm-arm/arch-orion/system.h delete mode 100644 include/asm-arm/arch-orion/timex.h delete mode 100644 include/asm-arm/arch-orion/uncompress.h delete mode 100644 include/asm-arm/arch-orion/vmalloc.h create mode 100644 include/asm-arm/arch-orion5x/debug-macro.S create mode 100644 include/asm-arm/arch-orion5x/dma.h create mode 100644 include/asm-arm/arch-orion5x/entry-macro.S create mode 100644 include/asm-arm/arch-orion5x/gpio.h create mode 100644 include/asm-arm/arch-orion5x/hardware.h create mode 100644 include/asm-arm/arch-orion5x/io.h create mode 100644 include/asm-arm/arch-orion5x/irqs.h create mode 100644 include/asm-arm/arch-orion5x/memory.h create mode 100644 include/asm-arm/arch-orion5x/orion5x.h create mode 100644 include/asm-arm/arch-orion5x/system.h create mode 100644 include/asm-arm/arch-orion5x/timex.h create mode 100644 include/asm-arm/arch-orion5x/uncompress.h create mode 100644 include/asm-arm/arch-orion5x/vmalloc.h (limited to 'include/asm-arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 845f96e9f0d..2f4fb773f3e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -377,7 +377,7 @@ config ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -config ARCH_ORION +config ARCH_ORION5X bool "Marvell Orion" depends on MMU select PCI @@ -386,7 +386,8 @@ config ARCH_ORION select GENERIC_CLOCKEVENTS select PLAT_ORION help - Support for Marvell Orion System on Chip family. + Support for the following Marvell Orion 5x series SoCs: + Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.) config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" @@ -517,7 +518,7 @@ source "arch/arm/mach-omap1/Kconfig" source "arch/arm/mach-omap2/Kconfig" -source "arch/arm/mach-orion/Kconfig" +source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 27866cf0c18..6f997505375 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -139,7 +139,7 @@ endif machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX3) := mx3 - machine-$(CONFIG_ARCH_ORION) := orion + machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_MSM7X00A) := msm ifeq ($(CONFIG_ARCH_EBSA110),y) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig new file mode 100644 index 00000000000..52cd99bd52f --- /dev/null +++ b/arch/arm/configs/orion5x_defconfig @@ -0,0 +1,1383 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24 +# Thu Feb 7 14:10:30 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +CONFIG_ARCH_ORION5X=y +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Orion Implementations +# +CONFIG_MACH_DB88F5281=y +CONFIG_MACH_RD88F5182=y +CONFIG_MACH_KUROBOX_PRO=y +CONFIG_MACH_DNS323=y +CONFIG_MACH_TS209=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_FEROCEON=y +CONFIG_CPU_FEROCEON_OLD_ID=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_NFTL=y +# CONFIG_NFTL_RW is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_ORION=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +CONFIG_SKGE=y +CONFIG_SKY2=y +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +CONFIG_MV643XX_ETH=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_MV64XXX=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_M41T80=y +# CONFIG_RTC_DRV_M41T80_WDT is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_LDM_DEBUG=y +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion_defconfig deleted file mode 100644 index 1e5aaa645fc..00000000000 --- a/arch/arm/configs/orion_defconfig +++ /dev/null @@ -1,1383 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 14:10:30 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_MXC is not set -CONFIG_ARCH_ORION=y -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Orion Implementations -# -CONFIG_MACH_DB88F5281=y -CONFIG_MACH_RD88F5182=y -CONFIG_MACH_KUROBOX_PRO=y -CONFIG_MACH_DNS323=y -CONFIG_MACH_TS209=y - -# -# Boot options -# - -# -# Power management -# - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_FEROCEON=y -CONFIG_CPU_FEROCEON_OLD_ID=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -CONFIG_PCI=y -CONFIG_PCI_SYSCALL=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCI_LEGACY=y -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set -# CONFIG_ATAGS_PROC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_NFTL=y -# CONFIG_NFTL_RW is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_I4=y -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_IMPA7 is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -# CONFIG_MTD_ALAUDA is not set -CONFIG_MTD_NAND_ORION=y -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_AHCI is not set -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -CONFIG_SATA_MV=y -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=y -CONFIG_SKY2=y -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_TIGON3=y -# CONFIG_BNX2 is not set -CONFIG_MV643XX_ETH=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -CONFIG_I2C_MV64XXX=y - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -# CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_GPIO is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -CONFIG_RTC_DRV_RS5C372=y -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -CONFIG_RTC_DRV_M41T80=y -# CONFIG_RTC_DRV_M41T80_WDT is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=y -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_SAMPLES is not set -CONFIG_DEBUG_USER=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_BLKCIPHER=m -# CONFIG_CRYPTO_SEQIV is not set -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion/Kconfig deleted file mode 100644 index 1dcbb6ac5a3..00000000000 --- a/arch/arm/mach-orion/Kconfig +++ /dev/null @@ -1,41 +0,0 @@ -if ARCH_ORION - -menu "Orion Implementations" - -config MACH_DB88F5281 - bool "Marvell Orion-2 Development Board" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - Marvell Orion-2 (88F5281) Development Board - -config MACH_RD88F5182 - bool "Marvell Orion-NAS Reference Design" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - Marvell Orion-NAS (88F5182) RD2 - -config MACH_KUROBOX_PRO - bool "KuroBox Pro" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - KuroBox Pro platform. - -config MACH_DNS323 - bool "D-Link DNS-323" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - D-Link DNS-323 platform. - -config MACH_TS209 - bool "QNAP TS-109/TS-209" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-109/TS-209 platform. - -endmenu - -endif diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion/Makefile deleted file mode 100644 index d894caa5060..00000000000 --- a/arch/arm/mach-orion/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -obj-y += common.o addr-map.o pci.o gpio.o irq.o -obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o -obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o -obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_DNS323) += dns323-setup.o -obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion/Makefile.boot deleted file mode 100644 index 67039c3e0c4..00000000000 --- a/arch/arm/mach-orion/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c deleted file mode 100644 index 738de617e3c..00000000000 --- a/arch/arm/mach-orion/addr-map.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * arch/arm/mach-orion/addr-map.c - * - * Address map functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -/* - * The Orion has fully programable address map. There's a separate address - * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, - * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own - * address decode windows that allow it to access any of the Orion resources. - * - * CPU address decoding -- - * Linux assumes that it is the boot loader that already setup the access to - * DDR and internal registers. - * Setup access to PCI and PCI-E IO/MEM space is issued by this file. - * Setup access to various devices located on the device bus interface (e.g. - * flashes, RTC, etc) should be issued by machine-setup.c according to - * specific board population (by using orion_setup_*_win()). - * - * Non-CPU Masters address decoding -- - * Unlike the CPU, we setup the access from Orion's master interfaces to DDR - * banks only (the typical use case). - * Setup access for each master to DDR is issued by common.c. - * - * Note: although orion_setbits() and orion_clrbits() are not atomic - * no locking is necessary here since code in this file is only called - * at boot time when there is no concurrency issues. - */ - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0 -#define TARGET_DEV_BUS 1 -#define TARGET_PCI 3 -#define TARGET_PCIE 4 -#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ - ((n) == 1) ? 0xd : \ - ((n) == 2) ? 0xb : \ - ((n) == 3) ? 0x7 : 0xf) -#define ATTR_PCIE_MEM 0x59 -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCIE_WA 0x79 -#define ATTR_PCI_MEM 0x59 -#define ATTR_PCI_IO 0x51 -#define ATTR_DEV_CS0 0x1e -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_BOOT 0xf -#define WIN_EN 1 - -/* - * Helpers to get DDR bank info - */ -#define DDR_BASE_CS(n) ORION_DDR_REG(0x1500 + ((n) * 8)) -#define DDR_SIZE_CS(n) ORION_DDR_REG(0x1504 + ((n) * 8)) -#define DDR_MAX_CS 4 -#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) -#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) -#define DDR_BANK_EN 1 - -/* - * CPU Address Decode Windows registers - */ -#define CPU_WIN_CTRL(n) ORION_BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) ORION_BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) ORION_BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) ORION_BRIDGE_REG(0x00c | ((n) << 4)) - -/* - * Gigabit Ethernet Address Decode Windows registers - */ -#define ETH_WIN_BASE(win) ORION_ETH_REG(0x200 + ((win) * 8)) -#define ETH_WIN_SIZE(win) ORION_ETH_REG(0x204 + ((win) * 8)) -#define ETH_WIN_REMAP(win) ORION_ETH_REG(0x280 + ((win) * 4)) -#define ETH_WIN_EN ORION_ETH_REG(0x290) -#define ETH_WIN_PROT ORION_ETH_REG(0x294) -#define ETH_MAX_WIN 6 -#define ETH_MAX_REMAP_WIN 4 - - -struct mbus_dram_target_info orion_mbus_dram_info; - -static int __init orion_cpu_win_can_remap(int win) -{ - u32 dev, rev; - - orion_pcie_id(&dev, &rev); - if ((dev == MV88F5281_DEV_ID && win < 4) - || (dev == MV88F5182_DEV_ID && win < 2) - || (dev == MV88F5181_DEV_ID && win < 2)) - return 1; - - return 0; -} - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - orion_write(CPU_WIN_BASE(win), base & 0xffff0000); - orion_write(CPU_WIN_CTRL(win), - ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1); - - if (orion_cpu_win_can_remap(win)) { - if (remap < 0) - remap = base; - - orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); - orion_write(CPU_WIN_REMAP_HI(win), 0); - } -} - -void __init orion_setup_cpu_mbus_bridge(void) -{ - int i; - int cs; - - /* - * First, disable and clear windows. - */ - for (i = 0; i < 8; i++) { - orion_write(CPU_WIN_BASE(i), 0); - orion_write(CPU_WIN_CTRL(i), 0); - if (orion_cpu_win_can_remap(i)) { - orion_write(CPU_WIN_REMAP_LO(i), 0); - orion_write(CPU_WIN_REMAP_HI(i), 0); - } - } - - /* - * Setup windows for PCI+PCIe IO+MEM space. - */ - setup_cpu_win(0, ORION_PCIE_IO_PHYS_BASE, ORION_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, ORION_PCIE_IO_BUS_BASE); - setup_cpu_win(1, ORION_PCI_IO_PHYS_BASE, ORION_PCI_IO_SIZE, - TARGET_PCI, ATTR_PCI_IO, ORION_PCI_IO_BUS_BASE); - setup_cpu_win(2, ORION_PCIE_MEM_PHYS_BASE, ORION_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, ORION_PCI_MEM_PHYS_BASE, ORION_PCI_MEM_SIZE, - TARGET_PCI, ATTR_PCI_MEM, -1); - - /* - * Setup MBUS dram target info. - */ - orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(DDR_BASE_CS(i)); - u32 size = readl(DDR_SIZE_CS(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &orion_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xff000000; - w->size = (size | 0x00ffffff) + 1; - } - } - orion_mbus_dram_info.num_cs = cs; -} - -void __init orion_setup_dev_boot_win(u32 base, u32 size) -{ - setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); -} - -void __init orion_setup_dev0_win(u32 base, u32 size) -{ - setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1); -} - -void __init orion_setup_dev1_win(u32 base, u32 size) -{ - setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1); -} - -void __init orion_setup_dev2_win(u32 base, u32 size) -{ - setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1); -} - -void __init orion_setup_pcie_wa_win(u32 base, u32 size) -{ - setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); -} - -void __init orion_setup_eth_wins(void) -{ - int i; - - /* - * First, disable and clear windows - */ - for (i = 0; i < ETH_MAX_WIN; i++) { - orion_write(ETH_WIN_BASE(i), 0); - orion_write(ETH_WIN_SIZE(i), 0); - orion_setbits(ETH_WIN_EN, 1 << i); - orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); - if (i < ETH_MAX_REMAP_WIN) - orion_write(ETH_WIN_REMAP(i), 0); - } - - /* - * Setup windows for DDR banks. - */ - for (i = 0; i < DDR_MAX_CS; i++) { - u32 base, size; - size = orion_read(DDR_SIZE_CS(i)); - base = orion_read(DDR_BASE_CS(i)); - if (size & DDR_BANK_EN) { - base = DDR_REG_TO_BASE(base); - size = DDR_REG_TO_SIZE(size); - orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); - orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) | - (ATTR_DDR_CS(i) << 8) | - TARGET_DDR); - orion_clrbits(ETH_WIN_EN, 1 << i); - orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); - } - } -} diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c deleted file mode 100644 index 85c8f18268a..00000000000 --- a/arch/arm/mach-orion/common.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * arch/arm/mach-orion/common.c - * - * Core functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc orion_io_desc[] __initdata = { - { - .virtual = ORION_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_REGS_PHYS_BASE), - .length = ORION_REGS_SIZE, - .type = MT_DEVICE - }, - { - .virtual = ORION_PCIE_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE), - .length = ORION_PCIE_IO_SIZE, - .type = MT_DEVICE - }, - { - .virtual = ORION_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCI_IO_PHYS_BASE), - .length = ORION_PCI_IO_SIZE, - .type = MT_DEVICE - }, - { - .virtual = ORION_PCIE_WA_VIRT_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE), - .length = ORION_PCIE_WA_SIZE, - .type = MT_DEVICE - }, -}; - -void __init orion_map_io(void) -{ - iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc)); -} - -/***************************************************************************** - * UART - ****************************************************************************/ - -static struct resource orion_uart_resources[] = { - { - .start = UART0_PHYS_BASE, - .end = UART0_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_UART0, - .end = IRQ_ORION_UART0, - .flags = IORESOURCE_IRQ, - }, - { - .start = UART1_PHYS_BASE, - .end = UART1_PHYS_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_UART1, - .end = IRQ_ORION_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct plat_serial8250_port orion_uart_data[] = { - { - .mapbase = UART0_PHYS_BASE, - .membase = (char *)UART0_VIRT_BASE, - .irq = IRQ_ORION_UART0, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = ORION_TCLK, - }, - { - .mapbase = UART1_PHYS_BASE, - .membase = (char *)UART1_VIRT_BASE, - .irq = IRQ_ORION_UART1, - .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = ORION_TCLK, - }, - { }, -}; - -static struct platform_device orion_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = orion_uart_data, - }, - .resource = orion_uart_resources, - .num_resources = ARRAY_SIZE(orion_uart_resources), -}; - -/******************************************************************************* - * USB Controller - 2 interfaces - ******************************************************************************/ - -static struct resource orion_ehci0_resources[] = { - { - .start = ORION_USB0_PHYS_BASE, - .end = ORION_USB0_PHYS_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_USB0_CTRL, - .end = IRQ_ORION_USB0_CTRL, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource orion_ehci1_resources[] = { - { - .start = ORION_USB1_PHYS_BASE, - .end = ORION_USB1_PHYS_BASE + SZ_4K, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_ORION_USB1_CTRL, - .end = IRQ_ORION_USB1_CTRL, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct orion_ehci_data orion_ehci_data = { - .dram = &orion_mbus_dram_info, -}; - -static u64 ehci_dmamask = 0xffffffffUL; - -static struct platform_device orion_ehci0 = { - .name = "orion-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &orion_ehci_data, - }, - .resource = orion_ehci0_resources, - .num_resources = ARRAY_SIZE(orion_ehci0_resources), -}; - -static struct platform_device orion_ehci1 = { - .name = "orion-ehci", - .id = 1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = &orion_ehci_data, - }, - .resource = orion_ehci1_resources, - .num_resources = ARRAY_SIZE(orion_ehci1_resources), -}; - -/***************************************************************************** - * Gigabit Ethernet port - * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) - ****************************************************************************/ - -static struct resource orion_eth_shared_resources[] = { - { - .start = ORION_ETH_PHYS_BASE + 0x2000, - .end = ORION_ETH_PHYS_BASE + 0x3fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device orion_eth_shared = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = 1, - .resource = orion_eth_shared_resources, -}; - -static struct resource orion_eth_resources[] = { - { - .name = "eth irq", - .start = IRQ_ORION_ETH_SUM, - .end = IRQ_ORION_ETH_SUM, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device orion_eth = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = 1, - .resource = orion_eth_resources, -}; - -void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data) -{ - orion_eth.dev.platform_data = eth_data; - platform_device_register(&orion_eth_shared); - platform_device_register(&orion_eth); -} - -/***************************************************************************** - * I2C controller - * (The Orion and Discovery (MV643xx) families share the same I2C controller) - ****************************************************************************/ - -static struct mv64xxx_i2c_pdata orion_i2c_pdata = { - .freq_m = 8, /* assumes 166 MHz TCLK */ - .freq_n = 3, - .timeout = 1000, /* Default timeout of 1 second */ -}; - -static struct resource orion_i2c_resources[] = { - { - .name = "i2c base", - .start = I2C_PHYS_BASE, - .end = I2C_PHYS_BASE + 0x20 -1, - .flags = IORESOURCE_MEM, - }, - { - .name = "i2c irq", - .start = IRQ_ORION_I2C, - .end = IRQ_ORION_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_i2c = { - .name = MV64XXX_I2C_CTLR_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(orion_i2c_resources), - .resource = orion_i2c_resources, - .dev = { - .platform_data = &orion_i2c_pdata, - }, -}; - -/***************************************************************************** - * Sata port - ****************************************************************************/ -static struct resource orion_sata_resources[] = { - { - .name = "sata base", - .start = ORION_SATA_PHYS_BASE, - .end = ORION_SATA_PHYS_BASE + 0x5000 - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "sata irq", - .start = IRQ_ORION_SATA, - .end = IRQ_ORION_SATA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device orion_sata = { - .name = "sata_mv", - .id = 0, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(orion_sata_resources), - .resource = orion_sata_resources, -}; - -void __init orion_sata_init(struct mv_sata_platform_data *sata_data) -{ - sata_data->dram = &orion_mbus_dram_info; - orion_sata.dev.platform_data = sata_data; - platform_device_register(&orion_sata); -} - -/***************************************************************************** - * Time handling - ****************************************************************************/ - -static void orion_timer_init(void) -{ - orion_time_init(IRQ_ORION_BRIDGE, ORION_TCLK); -} - -struct sys_timer orion_timer = { - .init = orion_timer_init, -}; - -/***************************************************************************** - * General - ****************************************************************************/ - -/* - * Identify device ID and rev from PCIE configuration header space '0'. - */ -static void __init orion_id(u32 *dev, u32 *rev, char **dev_name) -{ - orion_pcie_id(dev, rev); - - if (*dev == MV88F5281_DEV_ID) { - if (*rev == MV88F5281_REV_D2) { - *dev_name = "MV88F5281-D2"; - } else if (*rev == MV88F5281_REV_D1) { - *dev_name = "MV88F5281-D1"; - } else { - *dev_name = "MV88F5281-Rev-Unsupported"; - } - } else if (*dev == MV88F5182_DEV_ID) { - if (*rev == MV88F5182_REV_A2) { - *dev_name = "MV88F5182-A2"; - } else { - *dev_name = "MV88F5182-Rev-Unsupported"; - } - } else if (*dev == MV88F5181_DEV_ID) { - if (*rev == MV88F5181_REV_B1) { - *dev_name = "MV88F5181-Rev-B1"; - } else { - *dev_name = "MV88F5181-Rev-Unsupported"; - } - } else { - *dev_name = "Device-Unknown"; - } -} - -void __init orion_init(void) -{ - char *dev_name; - u32 dev, rev; - - orion_id(&dev, &rev, &dev_name); - printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK); - - /* - * Setup Orion address map - */ - orion_setup_cpu_mbus_bridge(); - orion_setup_eth_wins(); - - /* - * Register devices. - */ - platform_device_register(&orion_uart); - platform_device_register(&orion_ehci0); - if (dev == MV88F5182_DEV_ID) - platform_device_register(&orion_ehci1); - platform_device_register(&orion_i2c); -} - -/* - * Many orion-based systems have buggy bootloader implementations. - * This is a common fixup for bogus memory tags. - */ -void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, - char **from, struct meminfo *meminfo) -{ - for (; t->hdr.size; t = tag_next(t)) - if (t->hdr.tag == ATAG_MEM && - (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || - t->u.mem.start & ~PAGE_MASK)) { - printk(KERN_WARNING - "Clearing invalid memory bank %dKB@0x%08x\n", - t->u.mem.size / 1024, t->u.mem.start); - t->hdr.tag = 0; - } -} diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h deleted file mode 100644 index bcc31adaca1..00000000000 --- a/arch/arm/mach-orion/common.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef __ARCH_ORION_COMMON_H -#define __ARCH_ORION_COMMON_H - -/* - * Basic Orion init functions used early by machine-setup. - */ - -void orion_map_io(void); -void orion_init_irq(void); -void orion_init(void); -extern struct sys_timer orion_timer; - -/* - * Enumerations and functions for Orion windows mapping. Used by Orion core - * functions to map its interfaces and by the machine-setup to map its on- - * board devices. Details in /mach-orion/addr-map.c - */ -extern struct mbus_dram_target_info orion_mbus_dram_info; -void orion_setup_cpu_mbus_bridge(void); -void orion_setup_dev_boot_win(u32 base, u32 size); -void orion_setup_dev0_win(u32 base, u32 size); -void orion_setup_dev1_win(u32 base, u32 size); -void orion_setup_dev2_win(u32 base, u32 size); -void orion_setup_pcie_wa_win(u32 base, u32 size); -void orion_setup_eth_wins(void); - -/* - * Shared code used internally by other Orion core functions. - * (/mach-orion/pci.c) - */ - -struct pci_sys_data; -struct pci_bus; - -void orion_pcie_id(u32 *dev, u32 *rev); -int orion_pcie_local_bus_nr(void); -int orion_pci_local_bus_nr(void); -int orion_pci_sys_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); - -/* - * Valid GPIO pins according to MPP setup, used by machine-setup. - * (/mach-orion/gpio.c). - */ - -void orion_gpio_set_valid_pins(u32 pins); -void gpio_display(void); /* debug */ - -/* - * Pull in Orion Ethernet platform_data, used by machine-setup - */ - -struct mv643xx_eth_platform_data; - -void orion_eth_init(struct mv643xx_eth_platform_data *eth_data); - -/* - * Orion Sata platform_data, used by machine-setup - */ - -struct mv_sata_platform_data; - -void orion_sata_init(struct mv_sata_platform_data *sata_data); - -struct machine_desc; -struct meminfo; -struct tag; -extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, - char **, struct meminfo *); - - -#endif diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c deleted file mode 100644 index a0a9e4851b5..00000000000 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * arch/arm/mach-orion/db88f5281-setup.c - * - * Marvell Orion-2 Development Board Setup - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -/***************************************************************************** - * DB-88F5281 on board devices - ****************************************************************************/ - -/* - * 512K NOR flash Device bus boot chip select - */ - -#define DB88F5281_NOR_BOOT_BASE 0xf4000000 -#define DB88F5281_NOR_BOOT_SIZE SZ_512K - -/* - * 7-Segment on Device bus chip select 0 - */ - -#define DB88F5281_7SEG_BASE 0xfa000000 -#define DB88F5281_7SEG_SIZE SZ_1K - -/* - * 32M NOR flash on Device bus chip select 1 - */ - -#define DB88F5281_NOR_BASE 0xfc000000 -#define DB88F5281_NOR_SIZE SZ_32M - -/* - * 32M NAND flash on Device bus chip select 2 - */ - -#define DB88F5281_NAND_BASE 0xfa800000 -#define DB88F5281_NAND_SIZE SZ_1K - -/* - * PCI - */ - -#define DB88F5281_PCI_SLOT0_OFFS 7 -#define DB88F5281_PCI_SLOT0_IRQ_PIN 12 -#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13 - -/***************************************************************************** - * 512M NOR Flash on Device bus Boot CS - ****************************************************************************/ - -static struct physmap_flash_data db88f5281_boot_flash_data = { - .width = 1, /* 8 bit bus width */ -}; - -static struct resource db88f5281_boot_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DB88F5281_NOR_BOOT_BASE, - .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device db88f5281_boot_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &db88f5281_boot_flash_data, - }, - .num_resources = 1, - .resource = &db88f5281_boot_flash_resource, -}; - -/***************************************************************************** - * 32M NOR Flash on Device bus CS1 - ****************************************************************************/ - -static struct physmap_flash_data db88f5281_nor_flash_data = { - .width = 4, /* 32 bit bus width */ -}; - -static struct resource db88f5281_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DB88F5281_NOR_BASE, - .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1, -}; - -static struct platform_device db88f5281_nor_flash = { - .name = "physmap-flash", - .id = 1, - .dev = { - .platform_data = &db88f5281_nor_flash_data, - }, - .num_resources = 1, - .resource = &db88f5281_nor_flash_resource, -}; - -/***************************************************************************** - * 32M NAND Flash on Device bus CS2 - ****************************************************************************/ - -static struct mtd_partition db88f5281_nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = SZ_2M, - }, - { - .name = "root", - .offset = SZ_2M, - .size = (SZ_16M - SZ_2M), - }, - { - .name = "user", - .offset = SZ_16M, - .size = SZ_8M, - }, - { - .name = "recovery", - .offset = (SZ_16M + SZ_8M), - .size = SZ_8M, - }, -}; - -static struct resource db88f5281_nand_resource = { - .flags = IORESOURCE_MEM, - .start = DB88F5281_NAND_BASE, - .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1, -}; - -static struct orion_nand_data db88f5281_nand_data = { - .parts = db88f5281_nand_parts, - .nr_parts = ARRAY_SIZE(db88f5281_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device db88f5281_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &db88f5281_nand_data, - }, - .resource = &db88f5281_nand_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * 7-Segment on Device bus CS0 - * Dummy counter every 2 sec - ****************************************************************************/ - -static void __iomem *db88f5281_7seg; -static struct timer_list db88f5281_timer; - -static void db88f5281_7seg_event(unsigned long data) -{ - static int count = 0; - writel(0, db88f5281_7seg + (count << 4)); - count = (count + 1) & 7; - mod_timer(&db88f5281_timer, jiffies + 2 * HZ); -} - -static int __init db88f5281_7seg_init(void) -{ - if (machine_is_db88f5281()) { - db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE, - DB88F5281_7SEG_SIZE); - if (!db88f5281_7seg) { - printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n"); - return -EIO; - } - setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0); - mod_timer(&db88f5281_timer, jiffies + 2 * HZ); - } - - return 0; -} - -__initcall(db88f5281_7seg_init); - -/***************************************************************************** - * PCI - ****************************************************************************/ - -void __init db88f5281_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = DB88F5281_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "db88f5281_pci_preinit faield to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); - } - - pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; - if (gpio_request(pin, "PCI Int2") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "db88f5281_pci_preinit faield " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); - } -} - -static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCIE IRQ is connected internally (not GPIO) - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - DB88F5281_PCI_SLOT0_OFFS) { - case 0: - return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN); - case 1: - case 2: - return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN); - default: - return -1; - } -} - -static struct hw_pci db88f5281_pci __initdata = { - .nr_controllers = 2, - .preinit = db88f5281_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = db88f5281_pci_map_irq, -}; - -static int __init db88f5281_pci_init(void) -{ - if (machine_is_db88f5281()) - pci_common_init(&db88f5281_pci); - - return 0; -} - -subsys_initcall(db88f5281_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ -static struct mv643xx_eth_platform_data db88f5281_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC DS1339 on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata db88f5281_i2c_rtc = { - .driver_name = "rtc-ds1307", - .type = "ds1339", - .addr = 0x68, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static struct platform_device *db88f5281_devs[] __initdata = { - &db88f5281_boot_flash, - &db88f5281_nor_flash, - &db88f5281_nand_flash, -}; - -static void __init db88f5281_init(void) -{ - /* - * Basic Orion setup. Need to be called early. - */ - orion_init(); - - /* - * Setup the CPU address decode windows for our on-board devices - */ - orion_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE, - DB88F5281_NOR_BOOT_SIZE); - orion_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE); - orion_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE); - orion_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE); - - /* - * Setup Multiplexing Pins: - * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input) - * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2] - * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3] - * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1) - * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3) - * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator) - * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2) - * MPP14: NAND_REn[2] MPP15: NAND_WEn[2] - * MPP16: UART1_RX MPP17: UART1_TX - * MPP18: UART1_CTS MPP19: UART1_RTS - * MPP-DEV: DEV_D[16:31] - */ - orion_write(MPP_0_7_CTRL, 0x00222203); - orion_write(MPP_8_15_CTRL, 0x44000000); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); - - orion_gpio_set_valid_pins(0x00003fc3); - - platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); - i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); - orion_eth_init(&db88f5281_eth_data); -} - -MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") - /* Maintainer: Tzachi Perelstein */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = 0x00000100, - .init_machine = db88f5281_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, -MACHINE_END diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c deleted file mode 100644 index 88991f76479..00000000000 --- a/arch/arm/mach-orion/dns323-setup.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * arch/arm/mach-orion/dns323-setup.c - * - * Copyright (C) 2007 Herbert Valerio Riedel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -#define DNS323_GPIO_LED_RIGHT_AMBER 1 -#define DNS323_GPIO_LED_LEFT_AMBER 2 -#define DNS323_GPIO_LED_POWER 5 -#define DNS323_GPIO_OVERTEMP 6 -#define DNS323_GPIO_RTC 7 -#define DNS323_GPIO_POWER_OFF 8 -#define DNS323_GPIO_KEY_POWER 9 -#define DNS323_GPIO_KEY_RESET 10 - -/**************************************************************************** - * PCI setup - */ - -static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* PCI-E */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - pr_err("%s: requested mapping for unknown bus\n", __func__); - - return -1; -} - -static struct hw_pci dns323_pci __initdata = { - .nr_controllers = 1, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = dns323_pci_map_irq, -}; - -static int __init dns323_pci_init(void) -{ - if (machine_is_dns323()) - pci_common_init(&dns323_pci); - - return 0; -} - -subsys_initcall(dns323_pci_init); - -/**************************************************************************** - * Ethernet - */ - -static struct mv643xx_eth_platform_data dns323_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/**************************************************************************** - * 8MiB NOR flash (Spansion S29GL064M90TFIR4) - * - * Layout as used by D-Link: - * 0x00000000-0x00010000 : "MTD1" - * 0x00010000-0x00020000 : "MTD2" - * 0x00020000-0x001a0000 : "Linux Kernel" - * 0x001a0000-0x007d0000 : "File System" - * 0x007d0000-0x00800000 : "u-boot" - */ - -#define DNS323_NOR_BOOT_BASE 0xf4000000 -#define DNS323_NOR_BOOT_SIZE SZ_8M - -static struct mtd_partition dns323_partitions[] = { - { - .name = "MTD1", - .size = 0x00010000, - .offset = 0, - }, { - .name = "MTD2", - .size = 0x00010000, - .offset = 0x00010000, - }, { - .name = "Linux Kernel", - .size = 0x00180000, - .offset = 0x00020000, - }, { - .name = "File System", - .size = 0x00630000, - .offset = 0x001A0000, - }, { - .name = "u-boot", - .size = 0x00030000, - .offset = 0x007d0000, - } -}; - -static struct physmap_flash_data dns323_nor_flash_data = { - .width = 1, - .parts = dns323_partitions, - .nr_parts = ARRAY_SIZE(dns323_partitions) -}; - -static struct resource dns323_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DNS323_NOR_BOOT_BASE, - .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device dns323_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &dns323_nor_flash_data, }, - .resource = &dns323_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * GPIO LEDs (simple - doesn't use hardware blinking support) - */ - -static struct gpio_led dns323_leds[] = { - { - .name = "power:blue", - .gpio = DNS323_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "right:amber", - .gpio = DNS323_GPIO_LED_RIGHT_AMBER, - .active_low = 1, - }, { - .name = "left:amber", - .gpio = DNS323_GPIO_LED_LEFT_AMBER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data dns323_led_data = { - .num_leds = ARRAY_SIZE(dns323_leds), - .leds = dns323_leds, -}; - -static struct platform_device dns323_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { .platform_data = &dns323_led_data, }, -}; - -/**************************************************************************** - * GPIO Attached Keys - */ - -static struct gpio_keys_button dns323_buttons[] = { - { - .code = KEY_RESTART, - .gpio = DNS323_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - }, - { - .code = KEY_POWER, - .gpio = DNS323_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data dns323_button_data = { - .buttons = dns323_buttons, - .nbuttons = ARRAY_SIZE(dns323_buttons), -}; - -static struct platform_device dns323_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { .platform_data = &dns323_button_data, }, -}; - -/**************************************************************************** - * General Setup - */ - -static struct platform_device *dns323_plat_devices[] __initdata = { - &dns323_nor_flash, - &dns323_gpio_leds, - &dns323_button_device, -}; - -/* - * On the DNS-323 the following devices are attached via I2C: - * - * i2c addr | chip | description - * 0x3e | GMT G760Af | fan speed PWM controller - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) - * 0x68 | ST M41T80 | RTC w/ alarm - */ -static struct i2c_board_info __initdata dns323_i2c_devices[] = { - { - I2C_BOARD_INFO("g760a", 0x3e), - .type = "g760a", - }, -#if 0 - /* this entry requires the new-style driver model lm75 driver, - * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ - { - I2C_BOARD_INFO("lm75", 0x48), - .type = "g751", - }, -#endif - { - I2C_BOARD_INFO("rtc-m41t80", 0x68), - .type = "m41t80", - } -}; - -/* DNS-323 specific power off method */ -static void dns323_power_off(void) -{ - pr_info("%s: triggering power-off...\n", __func__); - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); -} - -static void __init dns323_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion_init(); - - /* setup flash mapping - * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 - */ - orion_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); - - /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE - * - * Open a special address decode windows for the PCIE WA. - */ - orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE); - - /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ - orion_write(MPP_0_7_CTRL, 0); - orion_write(MPP_8_15_CTRL, 0); - orion_write(MPP_16_19_CTRL, 0); - orion_write(MPP_DEV_CTRL, 0); - - /* Define used GPIO pins - - GPIO Map: - - | 0 | | PEX_RST_OUT (not controlled by GPIO) - | 1 | Out | right amber LED (= sata ch0 LED) (low-active) - | 2 | Out | left amber LED (= sata ch1 LED) (low-active) - | 3 | Out | //unknown// - | 4 | Out | power button LED (low-active, together with pin #5) - | 5 | Out | power button LED (low-active, together with pin #4) - | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active) - | 7 | In | M41T80 nIRQ/OUT/SQW signal - | 8 | Out | triggers power off (high-active) - | 9 | In | power button switch (low-active) - | 10 | In | reset button switch (low-active) - | 11 | Out | //unknown// - | 12 | Out | //unknown// - | 13 | Out | //unknown// - | 14 | Out | //unknown// - | 15 | Out | //unknown// - */ - orion_gpio_set_valid_pins(0x07f6); - - /* register dns323 specific power-off method */ - if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) - || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)) - pr_err("DNS323: failed to setup power-off GPIO\n"); - - pm_power_off = dns323_power_off; - - /* register flash and other platform devices */ - platform_add_devices(dns323_plat_devices, - ARRAY_SIZE(dns323_plat_devices)); - - i2c_register_board_info(0, dns323_i2c_devices, - ARRAY_SIZE(dns323_i2c_devices)); - - orion_eth_init(&dns323_eth_data); -} - -/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ -MACHINE_START(DNS323, "D-Link DNS-323") - /* Maintainer: Herbert Valerio Riedel */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = dns323_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c deleted file mode 100644 index afc7be08b30..00000000000 --- a/arch/arm/mach-orion/gpio.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * arch/arm/mach-orion/gpio.c - * - * GPIO functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -static DEFINE_SPINLOCK(gpio_lock); -static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; -static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ - -void __init orion_gpio_set_valid_pins(u32 pins) -{ - gpio_valid[0] = pins; -} - -/* - * GENERIC_GPIO primitives - */ -int gpio_direction_input(unsigned pin) -{ - unsigned long flags; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - /* - * Some callers might have not used the gpio_request(), - * so flag this pin as requested now. - */ - if (!gpio_label[pin]) - gpio_label[pin] = "?"; - - orion_setbits(GPIO_IO_CONF, 1 << pin); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned pin, int value) -{ - unsigned long flags; - int mask; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - /* - * Some callers might have not used the gpio_request(), - * so flag this pin as requested now. - */ - if (!gpio_label[pin]) - gpio_label[pin] = "?"; - - mask = 1 << pin; - orion_clrbits(GPIO_BLINK_EN, mask); - if (value) - orion_setbits(GPIO_OUT, mask); - else - orion_clrbits(GPIO_OUT, mask); - orion_clrbits(GPIO_IO_CONF, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -int gpio_get_value(unsigned pin) -{ - int val, mask = 1 << pin; - - if (orion_read(GPIO_IO_CONF) & mask) - val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL); - else - val = orion_read(GPIO_OUT); - - return val & mask; -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned pin, int value) -{ - unsigned long flags; - int mask = 1 << pin; - - spin_lock_irqsave(&gpio_lock, flags); - - orion_clrbits(GPIO_BLINK_EN, mask); - if (value) - orion_setbits(GPIO_OUT, mask); - else - orion_clrbits(GPIO_OUT, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); -} -EXPORT_SYMBOL(gpio_set_value); - -void orion_gpio_set_blink(unsigned pin, int blink) -{ - unsigned long flags; - int mask = 1 << pin; - - spin_lock_irqsave(&gpio_lock, flags); - - orion_clrbits(GPIO_OUT, mask); - if (blink) - orion_setbits(GPIO_BLINK_EN, mask); - else - orion_clrbits(GPIO_BLINK_EN, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); -} -EXPORT_SYMBOL(orion_gpio_set_blink); - -int gpio_request(unsigned pin, const char *label) -{ - int ret = 0; - unsigned long flags; - - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return -EINVAL; - } - - spin_lock_irqsave(&gpio_lock, flags); - - if (gpio_label[pin]) { - pr_debug("%s: GPIO %d already used as %s\n", - __func__, pin, gpio_label[pin]); - ret = -EBUSY; - } else - gpio_label[pin] = label ? label : "?"; - - spin_unlock_irqrestore(&gpio_lock, flags); - return ret; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned pin) -{ - if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { - pr_debug("%s: invalid GPIO %d\n", __func__, pin); - return; - } - - if (!gpio_label[pin]) - pr_warning("%s: GPIO %d already freed\n", __func__, pin); - else - gpio_label[pin] = NULL; -} -EXPORT_SYMBOL(gpio_free); - -/* Debug helper */ -void gpio_display(void) -{ - int i; - - for (i = 0; i < GPIO_MAX; i++) { - printk(KERN_DEBUG "Pin-%d: ", i); - - if (!test_bit(i, gpio_valid)) { - printk("non-GPIO\n"); - } else if (!gpio_label[i]) { - printk("GPIO, free\n"); - } else { - printk("GPIO, used by %s, ", gpio_label[i]); - if (orion_read(GPIO_IO_CONF) & (1 << i)) { - printk("input, active %s, level %s, edge %s\n", - ((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", - ((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", - ((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); - } else { - printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1); - } - } - } - - printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", - MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL)); - printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", - MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL)); - printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", - MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL)); - printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", - MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL)); - printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", - GPIO_OUT, orion_read(GPIO_OUT)); - printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", - GPIO_IO_CONF, orion_read(GPIO_IO_CONF)); - printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", - GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN)); - printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", - GPIO_IN_POL, orion_read(GPIO_IN_POL)); - printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", - GPIO_DATA_IN, orion_read(GPIO_DATA_IN)); - printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", - GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK)); - printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", - GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE)); - printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", - GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK)); -} diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion/irq.c deleted file mode 100644 index 7033cc1360e..00000000000 --- a/arch/arm/mach-orion/irq.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * arch/arm/mach-orion/irq.c - * - * Core IRQ functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -/***************************************************************************** - * Orion GPIO IRQ - * - * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same - * value of the line or the opposite value. - * - * Level IRQ handlers: DATA_IN is used directly as cause register. - * Interrupt are masked by LEVEL_MASK registers. - * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. - * Interrupt are masked by EDGE_MASK registers. - * Both-edge handlers: Similar to regular Edge handlers, but also swaps - * the polarity to catch the next line transaction. - * This is a race condition that might not perfectly - * work on some use cases. - * - * Every eight GPIO lines are grouped (OR'ed) before going up to main - * cause register. - * - * EDGE cause mask - * data-in /--------| |-----| |----\ - * -----| |----- ---- to main cause reg - * X \----------------| |----/ - * polarity LEVEL mask - * - ****************************************************************************/ -static void orion_gpio_irq_ack(u32 irq) -{ - int pin = irq_to_gpio(irq); - if (irq_desc[irq].status & IRQ_LEVEL) - /* - * Mask bit for level interrupt - */ - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); - else - /* - * Clear casue bit for egde interrupt - */ - orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin); -} - -static void orion_gpio_irq_mask(u32 irq) -{ - int pin = irq_to_gpio(irq); - if (irq_desc[irq].status & IRQ_LEVEL) - orion_clrbits(GPIO_LEVEL_MASK, 1 << pin); - else - orion_clrbits(GPIO_EDGE_MASK, 1 << pin); -} - -static void orion_gpio_irq_unmask(u32 irq) -{ - int pin = irq_to_gpio(irq); - if (irq_desc[irq].status & IRQ_LEVEL) - orion_setbits(GPIO_LEVEL_MASK, 1 << pin); - else - orion_setbits(GPIO_EDGE_MASK, 1 << pin); -} - -static int orion_gpio_set_irq_type(u32 irq, u32 type) -{ - int pin = irq_to_gpio(irq); - struct irq_desc *desc; - - if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) { - printk(KERN_ERR "orion_gpio_set_irq_type failed " - "(irq %d, pin %d).\n", irq, pin); - return -EINVAL; - } - - desc = irq_desc + irq; - - switch (type) { - case IRQT_HIGH: - desc->handle_irq = handle_level_irq; - desc->status |= IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_LOW: - desc->handle_irq = handle_level_irq; - desc->status |= IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_RISING: - desc->handle_irq = handle_edge_irq; - desc->status &= ~IRQ_LEVEL; - orion_clrbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_FALLING: - desc->handle_irq = handle_edge_irq; - desc->status &= ~IRQ_LEVEL; - orion_setbits(GPIO_IN_POL, (1 << pin)); - break; - case IRQT_BOTHEDGE: - desc->handle_irq = handle_edge_irq; - desc->status &= ~IRQ_LEVEL; - /* - * set initial polarity based on current input level - */ - if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN)) - & (1 << pin)) - orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ - else - orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ - - break; - default: - printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); - return -EINVAL; - } - - desc->status &= ~IRQ_TYPE_SENSE_MASK; - desc->status |= type & IRQ_TYPE_SENSE_MASK; - - return 0; -} - -static struct irq_chip orion_gpio_irq_chip = { - .name = "Orion-IRQ-GPIO", - .ack = orion_gpio_irq_ack, - .mask = orion_gpio_irq_mask, - .unmask = orion_gpio_irq_unmask, - .set_type = orion_gpio_set_irq_type, -}; - -static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 cause, offs, pin; - - BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31); - offs = (irq - IRQ_ORION_GPIO_0_7) * 8; - cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) | - (orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK)); - - for (pin = offs; pin < offs + 8; pin++) { - if (cause & (1 << pin)) { - irq = gpio_to_irq(pin); - desc = irq_desc + irq; - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { - /* Swap polarity (race with GPIO line) */ - u32 polarity = orion_read(GPIO_IN_POL); - polarity ^= 1 << pin; - orion_write(GPIO_IN_POL, polarity); - } - desc_handle_irq(irq, desc); - } - } -} - -static void __init orion_init_gpio_irq(void) -{ - int i; - struct irq_desc *desc; - - /* - * Mask and clear GPIO IRQ interrupts - */ - orion_write(GPIO_LEVEL_MASK, 0x0); - orion_write(GPIO_EDGE_MASK, 0x0); - orion_write(GPIO_EDGE_CAUSE, 0x0); - - /* - * Register chained level handlers for GPIO IRQs by default. - * User can use set_type() if he wants to use edge types handlers. - */ - for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) { - set_irq_chip(i, &orion_gpio_irq_chip); - set_irq_handler(i, handle_level_irq); - desc = irq_desc + i; - desc->status |= IRQ_LEVEL; - set_irq_flags(i, IRQF_VALID); - } - set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler); - set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler); -} - -/***************************************************************************** - * Orion Main IRQ - ****************************************************************************/ -static void __init orion_init_main_irq(void) -{ - orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); -} - -void __init orion_init_irq(void) -{ - orion_init_main_irq(); - orion_init_gpio_irq(); -} diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c deleted file mode 100644 index be417e7f423..00000000000 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * arch/arm/mach-orion/kurobox_pro-setup.c - * - * Maintainer: Ronen Shitrit - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -/***************************************************************************** - * KUROBOX-PRO Info - ****************************************************************************/ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 -#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K - -/* - * 256M NAND flash on Device bus chip select 1 - */ - -#define KUROBOX_PRO_NAND_BASE 0xfc000000 -#define KUROBOX_PRO_NAND_SIZE SZ_2M - -/***************************************************************************** - * 256MB NAND Flash on Device bus CS0 - ****************************************************************************/ - -static struct mtd_partition kurobox_pro_nand_parts[] = { - { - .name = "uImage", - .offset = 0, - .size = SZ_4M, - }, - { - .name = "rootfs", - .offset = SZ_4M, - .size = SZ_64M, - }, - { - .name = "extra", - .offset = SZ_4M + SZ_64M, - .size = SZ_256M - (SZ_4M + SZ_64M), - }, -}; - -static struct resource kurobox_pro_nand_resource = { - .flags = IORESOURCE_MEM, - .start = KUROBOX_PRO_NAND_BASE, - .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, -}; - -static struct orion_nand_data kurobox_pro_nand_data = { - .parts = kurobox_pro_nand_parts, - .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), - .cle = 0, - .ale = 1, - .width = 8, -}; - -static struct platform_device kurobox_pro_nand_flash = { - .name = "orion_nand", - .id = -1, - .dev = { - .platform_data = &kurobox_pro_nand_data, - }, - .resource = &kurobox_pro_nand_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data kurobox_pro_nor_flash_data = { - .width = 1, -}; - -static struct resource kurobox_pro_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = KUROBOX_PRO_NOR_BOOT_BASE, - .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device kurobox_pro_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &kurobox_pro_nor_flash_data, - }, - .num_resources = 1, - .resource = &kurobox_pro_nor_flash_resource, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCI isn't used on the Kuro - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - else - printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); - - return -1; -} - -static struct hw_pci kurobox_pro_pci __initdata = { - .nr_controllers = 1, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = kurobox_pro_pci_map_irq, -}; - -static int __init kurobox_pro_pci_init(void) -{ - if (machine_is_kurobox_pro()) - pci_common_init(&kurobox_pro_pci); - - return 0; -} - -subsys_initcall(kurobox_pro_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { - .driver_name = "rtc-rs5c372", - .type = "rs5c372a", - .addr = 0x32, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data kurobox_pro_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static struct platform_device *kurobox_pro_devices[] __initdata = { - &kurobox_pro_nor_flash, - &kurobox_pro_nand_flash, -}; - -static void __init kurobox_pro_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup the CPU address decode windows for our devices - */ - orion_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, - KUROBOX_PRO_NOR_BOOT_SIZE); - orion_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE); - - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE); - - /* - * Setup Multiplexing Pins -- - * MPP[0-1] Not used - * MPP[2] GPIO Micon - * MPP[3] GPIO RTC - * MPP[4-5] Not used - * MPP[6] Nand Flash REn - * MPP[7] Nand Flash WEn - * MPP[8-11] Not used - * MPP[12] SATA 0 presence Indication - * MPP[13] SATA 1 presence Indication - * MPP[14] SATA 0 active Indication - * MPP[15] SATA 1 active indication - * MPP[16-19] Not used - */ - orion_write(MPP_0_7_CTRL, 0x44220003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x0); - - orion_gpio_set_valid_pins(0x0000000c); - - platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); - i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); - orion_eth_init(&kurobox_pro_eth_data); - orion_sata_init(&kurobox_pro_sata_data); -} - -MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") - /* Maintainer: Ronen Shitrit */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = kurobox_pro_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c deleted file mode 100644 index 59684cc329b..00000000000 --- a/arch/arm/mach-orion/pci.c +++ /dev/null @@ -1,559 +0,0 @@ -/* - * arch/arm/mach-orion/pci.c - * - * PCI and PCIe functions for Marvell Orion System On Chip - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include "common.h" - -/***************************************************************************** - * Orion has one PCIe controller and one PCI controller. - * - * Note1: The local PCIe bus number is '0'. The local PCI bus number - * follows the scanned PCIe bridged busses, if any. - * - * Note2: It is possible for PCI/PCIe agents to access many subsystem's - * space, by configuring BARs and Address Decode Windows, e.g. flashes on - * device bus, Orion registers, etc. However this code only enable the - * access to DDR banks. - ****************************************************************************/ - - -/***************************************************************************** - * PCIe controller - ****************************************************************************/ -#define PCIE_BASE ((void __iomem *)ORION_PCIE_VIRT_BASE) - -void __init orion_pcie_id(u32 *dev, u32 *rev) -{ - *dev = orion_pcie_dev_id(PCIE_BASE); - *rev = orion_pcie_rev(PCIE_BASE); -} - -int orion_pcie_local_bus_nr(void) -{ - return orion_pcie_get_local_bus_nr(PCIE_BASE); -} - -static int pcie_valid_config(int bus, int dev) -{ - /* - * Don't go out when trying to access -- - * 1. nonexisting device on local bus - * 2. where there's no device connected (no link) - */ - if (bus == 0 && dev == 0) - return 1; - - if (!orion_pcie_link_up(PCIE_BASE)) - return 0; - - if (bus == 0 && dev != 1) - return 0; - - return 1; -} - - -/* - * PCIe config cycles are done by programming the PCIE_CONF_ADDR register - * and then reading the PCIE_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pcie_lock); - -static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - unsigned long flags; - int ret; - - if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - spin_lock_irqsave(&orion_pcie_lock, flags); - ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return ret; -} - -static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, - int where, int size, u32 *val) -{ - int ret; - - if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - /* - * We only support access to the non-extended configuration - * space when using the WA access method (or we would have to - * sacrifice 256M of CPU virtual address space.) - */ - if (where >= 0x100) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - ret = orion_pcie_rd_conf_wa((void __iomem *)ORION_PCIE_WA_VIRT_BASE, - bus, devfn, where, size, val); - - return ret; -} - -static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - unsigned long flags; - int ret; - - if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - spin_lock_irqsave(&orion_pcie_lock, flags); - ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); - spin_unlock_irqrestore(&orion_pcie_lock, flags); - - return ret; -} - -static struct pci_ops pcie_ops = { - .read = pcie_rd_conf, - .write = pcie_wr_conf, -}; - - -static int __init pcie_setup(struct pci_sys_data *sys) -{ - struct resource *res; - int dev; - - /* - * Generic PCIe unit setup. - */ - orion_pcie_setup(PCIE_BASE, &orion_mbus_dram_info); - - /* - * Check whether to apply Orion-1/Orion-NAS PCIe config - * read transaction workaround. - */ - dev = orion_pcie_dev_id(PCIE_BASE); - if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { - printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " - "read transaction workaround\n"); - pcie_ops.read = pcie_rd_conf_wa; - } - - /* - * Request resources. - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("pcie_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCIe I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCIE_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCIe IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCIe Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCIE_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCIe Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - -/***************************************************************************** - * PCI controller - ****************************************************************************/ -#define PCI_MODE ORION_PCI_REG(0xd00) -#define PCI_CMD ORION_PCI_REG(0xc00) -#define PCI_P2P_CONF ORION_PCI_REG(0x1d14) -#define PCI_CONF_ADDR ORION_PCI_REG(0xc78) -#define PCI_CONF_DATA ORION_PCI_REG(0xc7c) - -/* - * PCI_MODE bits - */ -#define PCI_MODE_64BIT (1 << 2) -#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) - -/* - * PCI_CMD bits - */ -#define PCI_CMD_HOST_REORDER (1 << 29) - -/* - * PCI_P2P_CONF bits - */ -#define PCI_P2P_BUS_OFFS 16 -#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) -#define PCI_P2P_DEV_OFFS 24 -#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) - -/* - * PCI_CONF_ADDR bits - */ -#define PCI_CONF_REG(reg) ((reg) & 0xfc) -#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) -#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) -#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) -#define PCI_CONF_ADDR_EN (1 << 31) - -/* - * Internal configuration space - */ -#define PCI_CONF_FUNC_STAT_CMD 0 -#define PCI_CONF_REG_STAT_CMD 4 -#define PCIX_STAT 0x64 -#define PCIX_STAT_BUS_OFFS 8 -#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) - -/* - * PCI Address Decode Windows registers - */ -#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION_PCI_REG(0xc08) : \ - ((n) == 1) ? ORION_PCI_REG(0xd08) : \ - ((n) == 2) ? ORION_PCI_REG(0xc0c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd0c) : 0) -#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION_PCI_REG(0xc48) : \ - ((n) == 1) ? ORION_PCI_REG(0xd48) : \ - ((n) == 2) ? ORION_PCI_REG(0xc4c) : \ - ((n) == 3) ? ORION_PCI_REG(0xd4c) : 0) -#define PCI_BAR_ENABLE ORION_PCI_REG(0xc3c) -#define PCI_ADDR_DECODE_CTRL ORION_PCI_REG(0xd3c) - -/* - * PCI configuration helpers for BAR settings - */ -#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) -#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) -#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) - -/* - * PCI config cycles are done by programming the PCI_CONF_ADDR register - * and then reading the PCI_CONF_DATA register. Need to make sure these - * transactions are atomic. - */ -static DEFINE_SPINLOCK(orion_pci_lock); - -int orion_pci_local_bus_nr(void) -{ - u32 conf = orion_read(PCI_P2P_CONF); - return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); -} - -static int orion_pci_hw_rd_conf(int bus, int dev, u32 func, - u32 where, u32 size, u32 *val) -{ - unsigned long flags; - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - *val = orion_read(PCI_CONF_DATA); - - if (size == 1) - *val = (*val >> (8*(where & 0x3))) & 0xff; - else if (size == 2) - *val = (*val >> (8*(where & 0x3))) & 0xffff; - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -static int orion_pci_hw_wr_conf(int bus, int dev, u32 func, - u32 where, u32 size, u32 val) -{ - unsigned long flags; - int ret = PCIBIOS_SUCCESSFUL; - - spin_lock_irqsave(&orion_pci_lock, flags); - - orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | - PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | - PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); - - if (size == 4) { - __raw_writel(val, PCI_CONF_DATA); - } else if (size == 2) { - __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); - } else if (size == 1) { - __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); - } else { - ret = PCIBIOS_BAD_REGISTER_NUMBER; - } - - spin_unlock_irqrestore(&orion_pci_lock, flags); - - return ret; -} - -static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 *val) -{ - /* - * Don't go out for local device - */ - if (bus->number == orion_pci_local_bus_nr() && - PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - if (bus->number == orion_pci_local_bus_nr() && - PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where, size, val); -} - -static struct pci_ops pci_ops = { - .read = orion_pci_rd_conf, - .write = orion_pci_wr_conf, -}; - -static void __init orion_pci_set_bus_nr(int nr) -{ - u32 p2p = orion_read(PCI_P2P_CONF); - - if (orion_read(PCI_MODE) & PCI_MODE_PCIX) { - /* - * PCI-X mode - */ - u32 pcix_status, bus, dev; - bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; - dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; - orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); - pcix_status &= ~PCIX_STAT_BUS_MASK; - pcix_status |= (nr << PCIX_STAT_BUS_OFFS); - orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); - } else { - /* - * PCI Conventional mode - */ - p2p &= ~PCI_P2P_BUS_MASK; - p2p |= (nr << PCI_P2P_BUS_OFFS); - orion_write(PCI_P2P_CONF, p2p); - } -} - -static void __init orion_pci_master_slave_enable(void) -{ - int bus_nr, func, reg; - u32 val; - - bus_nr = orion_pci_local_bus_nr(); - func = PCI_CONF_FUNC_STAT_CMD; - reg = PCI_CONF_REG_STAT_CMD; - orion_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val); - val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - orion_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); -} - -static void __init orion_setup_pci_wins(struct mbus_dram_target_info *dram) -{ - u32 win_enable; - int bus; - int i; - - /* - * First, disable windows. - */ - win_enable = 0xffffffff; - orion_write(PCI_BAR_ENABLE, win_enable); - - /* - * Setup windows for DDR banks. - */ - bus = orion_pci_local_bus_nr(); - - for (i = 0; i < dram->num_cs; i++) { - struct mbus_dram_window *cs = dram->cs + i; - u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); - u32 reg; - u32 val; - - /* - * Write DRAM bank base address register. - */ - reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index); - orion_pci_hw_rd_conf(bus, 0, func, reg, 4, &val); - val = (cs->base & 0xfffff000) | (val & 0xfff); - orion_pci_hw_wr_conf(bus, 0, func, reg, 4, val); - - /* - * Write DRAM bank size register. - */ - reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index); - orion_pci_hw_wr_conf(bus, 0, func, reg, 4, 0); - orion_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index), - (cs->size - 1) & 0xfffff000); - orion_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index), - cs->base & 0xfffff000); - - /* - * Enable decode window for this chip select. - */ - win_enable &= ~(1 << cs->cs_index); - } - - /* - * Re-enable decode windows. - */ - orion_write(PCI_BAR_ENABLE, win_enable); - - /* - * Disable automatic update of address remaping when writing to BARs. - */ - orion_setbits(PCI_ADDR_DECODE_CTRL, 1); -} - -static int __init pci_setup(struct pci_sys_data *sys) -{ - struct resource *res; - - /* - * Point PCI unit MBUS decode windows to DRAM space. - */ - orion_setup_pci_wins(&orion_mbus_dram_info); - - /* - * Master + Slave enable - */ - orion_pci_master_slave_enable(); - - /* - * Force ordering - */ - orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); - - /* - * Request resources - */ - res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); - if (!res) - panic("pci_setup unable to alloc resources"); - - /* - * IORESOURCE_IO - */ - res[0].name = "PCI I/O Space"; - res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCI_IO_BUS_BASE; - res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; - if (request_resource(&ioport_resource, &res[0])) - panic("Request PCI IO resource failed\n"); - sys->resource[0] = &res[0]; - - /* - * IORESOURCE_MEM - */ - res[1].name = "PCI Memory Space"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCI_MEM_PHYS_BASE; - res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; - if (request_resource(&iomem_resource, &res[1])) - panic("Request PCI Memory resource failed\n"); - sys->resource[1] = &res[1]; - - sys->resource[2] = NULL; - sys->io_offset = 0; - - return 1; -} - - -/***************************************************************************** - * General PCIe + PCI - ****************************************************************************/ -static void __devinit rc_pci_fixup(struct pci_dev *dev) -{ - /* - * Prevent enumeration of root complex. - */ - if (dev->bus->parent == NULL && dev->devfn == 0) { - int i; - - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); - -int __init orion_pci_sys_setup(int nr, struct pci_sys_data *sys) -{ - int ret = 0; - - if (nr == 0) { - orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); - ret = pcie_setup(sys); - } else if (nr == 1) { - orion_pci_set_bus_nr(sys->busnr); - ret = pci_setup(sys); - } - - return ret; -} - -struct pci_bus __init *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_bus *bus; - - if (nr == 0) { - bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); - } else if (nr == 1) { - bus = pci_scan_bus(sys->busnr, &pci_ops, sys); - } else { - bus = NULL; - BUG(); - } - - return bus; -} diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c deleted file mode 100644 index f3e38ecda1c..00000000000 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * arch/arm/mach-orion/rd88f5182-setup.c - * - * Marvell Orion-NAS Reference Design Setup - * - * Maintainer: Ronen Shitrit - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -/***************************************************************************** - * RD-88F5182 Info - ****************************************************************************/ - -/* - * 512K NOR flash Device bus boot chip select - */ - -#define RD88F5182_NOR_BOOT_BASE 0xf4000000 -#define RD88F5182_NOR_BOOT_SIZE SZ_512K - -/* - * 16M NOR flash on Device bus chip select 1 - */ - -#define RD88F5182_NOR_BASE 0xfc000000 -#define RD88F5182_NOR_SIZE SZ_16M - -/* - * PCI - */ - -#define RD88F5182_PCI_SLOT0_OFFS 7 -#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 -#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 - -/* - * GPIO Debug LED - */ - -#define RD88F5182_GPIO_DBG_LED 0 - -/***************************************************************************** - * 16M NOR Flash on Device bus CS1 - ****************************************************************************/ - -static struct physmap_flash_data rd88f5182_nor_flash_data = { - .width = 1, -}; - -static struct resource rd88f5182_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = RD88F5182_NOR_BASE, - .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, -}; - -static struct platform_device rd88f5182_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &rd88f5182_nor_flash_data, - }, - .num_resources = 1, - .resource = &rd88f5182_nor_flash_resource, -}; - -#ifdef CONFIG_LEDS - -/***************************************************************************** - * Use GPIO debug led as CPU active indication - ****************************************************************************/ - -static void rd88f5182_dbgled_event(led_event_t evt) -{ - int val; - - if (evt == led_idle_end) - val = 1; - else if (evt == led_idle_start) - val = 0; - else - return; - - gpio_set_value(RD88F5182_GPIO_DBG_LED, val); -} - -static int __init rd88f5182_dbgled_init(void) -{ - int pin; - - if (machine_is_rd88f5182()) { - pin = RD88F5182_GPIO_DBG_LED; - - if (gpio_request(pin, "DBGLED") == 0) { - if (gpio_direction_output(pin, 0) != 0) { - printk(KERN_ERR "rd88f5182_dbgled_init failed " - "to set output pin %d\n", pin); - gpio_free(pin); - return 0; - } - } else { - printk(KERN_ERR "rd88f5182_dbgled_init failed " - "to request gpio %d\n", pin); - return 0; - } - - leds_event = rd88f5182_dbgled_event; - } - return 0; -} - -__initcall(rd88f5182_dbgled_init); - -#endif - -/***************************************************************************** - * PCI - ****************************************************************************/ - -void __init rd88f5182_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; - if (gpio_request(pin, "PCI IntA") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); - } - - pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; - if (gpio_request(pin, "PCI IntB") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "rd88f5182_pci_preinit faield to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); - } -} - -static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCI-E isn't used on the RD2 - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - RD88F5182_PCI_SLOT0_OFFS) { - case 0: - if (pin == 1) - return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); - else - return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); - default: - return -1; - } -} - -static struct hw_pci rd88f5182_pci __initdata = { - .nr_controllers = 2, - .preinit = rd88f5182_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = rd88f5182_pci_map_irq, -}; - -static int __init rd88f5182_pci_init(void) -{ - if (machine_is_rd88f5182()) - pci_common_init(&rd88f5182_pci); - - return 0; -} - -subsys_initcall(rd88f5182_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data rd88f5182_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC DS1338 on I2C bus - ****************************************************************************/ -static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { - .driver_name = "rtc-ds1307", - .type = "ds1338", - .addr = 0x68, -}; - -/***************************************************************************** - * Sata - ****************************************************************************/ -static struct mv_sata_platform_data rd88f5182_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static struct platform_device *rd88f5182_devices[] __initdata = { - &rd88f5182_nor_flash, -}; - -static void __init rd88f5182_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup the CPU address decode windows for our devices - */ - orion_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, - RD88F5182_NOR_BOOT_SIZE); - orion_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); - - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE); - - /* - * Setup Multiplexing Pins -- - * MPP[0] Debug Led (GPIO - Out) - * MPP[1] Debug Led (GPIO - Out) - * MPP[2] N/A - * MPP[3] RTC_Int (GPIO - In) - * MPP[4] GPIO - * MPP[5] GPIO - * MPP[6] PCI_intA (GPIO - In) - * MPP[7] PCI_intB (GPIO - In) - * MPP[8-11] N/A - * MPP[12] SATA 0 presence Indication - * MPP[13] SATA 1 presence Indication - * MPP[14] SATA 0 active Indication - * MPP[15] SATA 1 active indication - * MPP[16-19] Not used - * MPP[20] PCI Clock to MV88F5182 - * MPP[21] PCI Clock to mini PCI CON11 - * MPP[22] USB 0 over current indication - * MPP[23] USB 1 over current indication - * MPP[24] USB 1 over current enable - * MPP[25] USB 0 over current enable - */ - - orion_write(MPP_0_7_CTRL, 0x00000003); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5555); - - orion_gpio_set_valid_pins(0x000000fb); - - platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); - i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); - orion_eth_init(&rd88f5182_eth_data); - orion_sata_init(&rd88f5182_sata_data); -} - -MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") - /* Maintainer: Ronen Shitrit */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = rd88f5182_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, -MACHINE_END diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c deleted file mode 100644 index 8eca070006f..00000000000 --- a/arch/arm/mach-orion/ts209-setup.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * QNAP TS-109/TS-209 Board Setup - * - * Maintainer: Byron Bradley - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 -#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M - -/**************************************************************************** - * 8MiB NOR flash. The struct mtd_partition is not in the same order as the - * partitions on the device because we want to keep compatability with - * existing QNAP firmware. - * - * Layout as used by QNAP: - * [2] 0x00000000-0x00200000 : "Kernel" - * [3] 0x00200000-0x00600000 : "RootFS1" - * [4] 0x00600000-0x00700000 : "RootFS2" - * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) - * [5] 0x00760000-0x00780000 : "U-Boot Config" - * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) - ***************************************************************************/ -static struct mtd_partition qnap_ts209_partitions[] = { - { - .name = "U-Boot", - .size = 0x00080000, - .offset = 0x00780000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0, - }, { - .name = "RootFS1", - .size = 0x00400000, - .offset = 0x00200000, - }, { - .name = "RootFS2", - .size = 0x00100000, - .offset = 0x00600000, - }, { - .name = "U-Boot Config", - .size = 0x00020000, - .offset = 0x00760000, - }, { - .name = "NAS Config", - .size = 0x00060000, - .offset = 0x00700000, - .mask_flags = MTD_WRITEABLE, - } -}; - -static struct physmap_flash_data qnap_ts209_nor_flash_data = { - .width = 1, - .parts = qnap_ts209_partitions, - .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) -}; - -static struct resource qnap_ts209_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = QNAP_TS209_NOR_BOOT_BASE, - .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device qnap_ts209_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { .platform_data = &qnap_ts209_nor_flash_data, }, - .resource = &qnap_ts209_nor_flash_resource, - .num_resources = 1, -}; - -/***************************************************************************** - * PCI - ****************************************************************************/ - -#define QNAP_TS209_PCI_SLOT0_OFFS 7 -#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 -#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 - -void __init qnap_ts209_pci_preinit(void) -{ - int pin; - - /* - * Configure PCI GPIO IRQ pins - */ - pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; - if (gpio_request(pin, "PCI Int1") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to " - "set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } - - pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; - if (gpio_request(pin, "PCI Int2") == 0) { - if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed " - "to set_irq_type pin %d\n", pin); - gpio_free(pin); - } - } else { - printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " - "%d\n", pin); - } -} - -static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * PCIE IRQ is connected internally (not GPIO) - */ - if (dev->bus->number == orion_pcie_local_bus_nr()) - return IRQ_ORION_PCIE0_INT; - - /* - * PCI IRQs are connected via GPIOs - */ - switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { - case 0: - return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); - case 1: - return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); - default: - return -1; - } -} - -static struct hw_pci qnap_ts209_pci __initdata = { - .nr_controllers = 2, - .preinit = qnap_ts209_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = orion_pci_sys_setup, - .scan = orion_pci_sys_scan_bus, - .map_irq = qnap_ts209_pci_map_irq, -}; - -static int __init qnap_ts209_pci_init(void) -{ - if (machine_is_ts_x09()) - pci_common_init(&qnap_ts209_pci); - - return 0; -} - -subsys_initcall(qnap_ts209_pci_init); - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { - .phy_addr = 8, - .force_phy_addr = 1, -}; - -/***************************************************************************** - * RTC S35390A on I2C bus - ****************************************************************************/ - -#define TS209_RTC_GPIO 3 - -static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { - .driver_name = "rtc-s35390a", - .addr = 0x30, - .irq = 0, -}; - -/**************************************************************************** - * GPIO Attached Keys - * Power button is attached to the PIC microcontroller - ****************************************************************************/ - -#define QNAP_TS209_GPIO_KEY_MEDIA 1 -#define QNAP_TS209_GPIO_KEY_RESET 2 - -static struct gpio_keys_button qnap_ts209_buttons[] = { - { - .code = KEY_RESTART, - .gpio = QNAP_TS209_GPIO_KEY_MEDIA, - .desc = "USB Copy Button", - .active_low = 1, - }, - { - .code = KEY_POWER, - .gpio = QNAP_TS209_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data qnap_ts209_button_data = { - .buttons = qnap_ts209_buttons, - .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), -}; - -static struct platform_device qnap_ts209_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { .platform_data = &qnap_ts209_button_data, }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data qnap_ts209_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - - * General Setup - ****************************************************************************/ - -static struct platform_device *qnap_ts209_devices[] __initdata = { - &qnap_ts209_nor_flash, - &qnap_ts209_button_device, -}; - -/* - * QNAP TS-[12]09 specific power off method via UART1-attached PIC - */ - -#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) - -static void qnap_ts209_power_off(void) -{ - /* 19200 baud divisor */ - const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200)); - - pr_info("%s: triggering power-off...\n", __func__); - - /* hijack uart1 and reset into sane state (19200,8n1) */ - orion_write(UART1_REG(LCR), 0x83); - orion_write(UART1_REG(DLL), divisor & 0xff); - orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff); - orion_write(UART1_REG(LCR), 0x03); - orion_write(UART1_REG(IER), 0x00); - orion_write(UART1_REG(FCR), 0x00); - orion_write(UART1_REG(MCR), 0x00); - - /* send the power-off command 'A' to PIC */ - orion_write(UART1_REG(TX), 'A'); -} - -static void __init qnap_ts209_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion_init(); - - /* - * Setup flash mapping - */ - orion_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE); - - /* - * Open a special address decode windows for the PCIE WA. - */ - orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE); - - /* - * Setup Multiplexing Pins -- - * MPP[0] Reserved - * MPP[1] USB copy button (0 active) - * MPP[2] Load defaults button (0 active) - * MPP[3] GPIO RTC - * MPP[4-5] Reserved - * MPP[6] PCI Int A - * MPP[7] PCI Int B - * MPP[8-11] Reserved - * MPP[12] SATA 0 presence - * MPP[13] SATA 1 presence - * MPP[14] SATA 0 active - * MPP[15] SATA 1 active - * MPP[16] UART1 RXD - * MPP[17] UART1 TXD - * MPP[18] SW_RST (0 active) - * MPP[19] Reserved - * MPP[20] PCI clock 0 - * MPP[21] PCI clock 1 - * MPP[22] USB 0 over current - * MPP[23-25] Reserved - */ - orion_write(MPP_0_7_CTRL, 0x3); - orion_write(MPP_8_15_CTRL, 0x55550000); - orion_write(MPP_16_19_CTRL, 0x5500); - orion_gpio_set_valid_pins(0x3cc0fff); - - /* register ts209 specific power-off method */ - pm_power_off = qnap_ts209_power_off; - - platform_add_devices(qnap_ts209_devices, - ARRAY_SIZE(qnap_ts209_devices)); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(TS209_RTC_GPIO) == 0) - qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); - else - gpio_free(TS209_RTC_GPIO); - } - if (qnap_ts209_i2c_rtc.irq == 0) - pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); - i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); - - orion_eth_init(&qnap_ts209_eth_data); - orion_sata_init(&qnap_ts209_sata_data); -} - -MACHINE_START(TS209, "QNAP TS-109/TS-209") - /* Maintainer: Byron Bradley */ - .phys_io = ORION_REGS_PHYS_BASE, - .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .init_machine = qnap_ts209_init, - .map_io = orion_map_io, - .init_irq = orion_init_irq, - .timer = &orion_timer, - .fixup = tag_fixup_mem32, -MACHINE_END diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig new file mode 100644 index 00000000000..01c66957d8f --- /dev/null +++ b/arch/arm/mach-orion5x/Kconfig @@ -0,0 +1,41 @@ +if ARCH_ORION5X + +menu "Orion Implementations" + +config MACH_DB88F5281 + bool "Marvell Orion-2 Development Board" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-2 (88F5281) Development Board + +config MACH_RD88F5182 + bool "Marvell Orion-NAS Reference Design" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-NAS (88F5182) RD2 + +config MACH_KUROBOX_PRO + bool "KuroBox Pro" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + KuroBox Pro platform. + +config MACH_DNS323 + bool "D-Link DNS-323" + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the + D-Link DNS-323 platform. + +config MACH_TS209 + bool "QNAP TS-109/TS-209" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-109/TS-209 platform. + +endmenu + +endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile new file mode 100644 index 00000000000..d894caa5060 --- /dev/null +++ b/arch/arm/mach-orion5x/Makefile @@ -0,0 +1,6 @@ +obj-y += common.o addr-map.o pci.o gpio.o irq.o +obj-$(CONFIG_MACH_DB88F5281) += db88f5281-setup.o +obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o +obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o +obj-$(CONFIG_MACH_DNS323) += dns323-setup.o +obj-$(CONFIG_MACH_TS209) += ts209-setup.o diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot new file mode 100644 index 00000000000..67039c3e0c4 --- /dev/null +++ b/arch/arm/mach-orion5x/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c new file mode 100644 index 00000000000..6b179371e0a --- /dev/null +++ b/arch/arm/mach-orion5x/addr-map.c @@ -0,0 +1,240 @@ +/* + * arch/arm/mach-orion5x/addr-map.c + * + * Address map functions for Marvell Orion 5x SoCs + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "common.h" + +/* + * The Orion has fully programable address map. There's a separate address + * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB, + * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own + * address decode windows that allow it to access any of the Orion resources. + * + * CPU address decoding -- + * Linux assumes that it is the boot loader that already setup the access to + * DDR and internal registers. + * Setup access to PCI and PCI-E IO/MEM space is issued by this file. + * Setup access to various devices located on the device bus interface (e.g. + * flashes, RTC, etc) should be issued by machine-setup.c according to + * specific board population (by using orion5x_setup_*_win()). + * + * Non-CPU Masters address decoding -- + * Unlike the CPU, we setup the access from Orion's master interfaces to DDR + * banks only (the typical use case). + * Setup access for each master to DDR is issued by common.c. + * + * Note: although orion_setbits() and orion_clrbits() are not atomic + * no locking is necessary here since code in this file is only called + * at boot time when there is no concurrency issues. + */ + +/* + * Generic Address Decode Windows bit settings + */ +#define TARGET_DDR 0 +#define TARGET_DEV_BUS 1 +#define TARGET_PCI 3 +#define TARGET_PCIE 4 +#define ATTR_DDR_CS(n) (((n) ==0) ? 0xe : \ + ((n) == 1) ? 0xd : \ + ((n) == 2) ? 0xb : \ + ((n) == 3) ? 0x7 : 0xf) +#define ATTR_PCIE_MEM 0x59 +#define ATTR_PCIE_IO 0x51 +#define ATTR_PCIE_WA 0x79 +#define ATTR_PCI_MEM 0x59 +#define ATTR_PCI_IO 0x51 +#define ATTR_DEV_CS0 0x1e +#define ATTR_DEV_CS1 0x1d +#define ATTR_DEV_CS2 0x1b +#define ATTR_DEV_BOOT 0xf +#define WIN_EN 1 + +/* + * Helpers to get DDR bank info + */ +#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) * 8)) +#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) * 8)) +#define DDR_MAX_CS 4 +#define DDR_REG_TO_SIZE(reg) (((reg) | 0xffffff) + 1) +#define DDR_REG_TO_BASE(reg) ((reg) & 0xff000000) +#define DDR_BANK_EN 1 + +/* + * CPU Address Decode Windows registers + */ +#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) +#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) +#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) +#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4)) + +/* + * Gigabit Ethernet Address Decode Windows registers + */ +#define ETH_WIN_BASE(win) ORION5X_ETH_REG(0x200 + ((win) * 8)) +#define ETH_WIN_SIZE(win) ORION5X_ETH_REG(0x204 + ((win) * 8)) +#define ETH_WIN_REMAP(win) ORION5X_ETH_REG(0x280 + ((win) * 4)) +#define ETH_WIN_EN ORION5X_ETH_REG(0x290) +#define ETH_WIN_PROT ORION5X_ETH_REG(0x294) +#define ETH_MAX_WIN 6 +#define ETH_MAX_REMAP_WIN 4 + + +struct mbus_dram_target_info orion5x_mbus_dram_info; + +static int __init orion5x_cpu_win_can_remap(int win) +{ + u32 dev, rev; + + orion5x_pcie_id(&dev, &rev); + if ((dev == MV88F5281_DEV_ID && win < 4) + || (dev == MV88F5182_DEV_ID && win < 2) + || (dev == MV88F5181_DEV_ID && win < 2)) + return 1; + + return 0; +} + +static void __init setup_cpu_win(int win, u32 base, u32 size, + u8 target, u8 attr, int remap) +{ + orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000); + orion5x_write(CPU_WIN_CTRL(win), + ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1); + + if (orion5x_cpu_win_can_remap(win)) { + if (remap < 0) + remap = base; + + orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000); + orion5x_write(CPU_WIN_REMAP_HI(win), 0); + } +} + +void __init orion5x_setup_cpu_mbus_bridge(void) +{ + int i; + int cs; + + /* + * First, disable and clear windows. + */ + for (i = 0; i < 8; i++) { + orion5x_write(CPU_WIN_BASE(i), 0); + orion5x_write(CPU_WIN_CTRL(i), 0); + if (orion5x_cpu_win_can_remap(i)) { + orion5x_write(CPU_WIN_REMAP_LO(i), 0); + orion5x_write(CPU_WIN_REMAP_HI(i), 0); + } + } + + /* + * Setup windows for PCI+PCIe IO+MEM space. + */ + setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE, + TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE); + setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE, + TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE); + setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE, + TARGET_PCIE, ATTR_PCIE_MEM, -1); + setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE, + TARGET_PCI, ATTR_PCI_MEM, -1); + + /* + * Setup MBUS dram target info. + */ + orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(DDR_BASE_CS(i)); + u32 size = readl(DDR_SIZE_CS(i)); + + /* + * Chip select enabled? + */ + if (size & 1) { + struct mbus_dram_window *w; + + w = &orion5x_mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); + w->base = base & 0xff000000; + w->size = (size | 0x00ffffff) + 1; + } + } + orion5x_mbus_dram_info.num_cs = cs; +} + +void __init orion5x_setup_dev_boot_win(u32 base, u32 size) +{ + setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); +} + +void __init orion5x_setup_dev0_win(u32 base, u32 size) +{ + setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1); +} + +void __init orion5x_setup_dev1_win(u32 base, u32 size) +{ + setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1); +} + +void __init orion5x_setup_dev2_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1); +} + +void __init orion5x_setup_pcie_wa_win(u32 base, u32 size) +{ + setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1); +} + +void __init orion5x_setup_eth_wins(void) +{ + int i; + + /* + * First, disable and clear windows + */ + for (i = 0; i < ETH_MAX_WIN; i++) { + orion5x_write(ETH_WIN_BASE(i), 0); + orion5x_write(ETH_WIN_SIZE(i), 0); + orion5x_setbits(ETH_WIN_EN, 1 << i); + orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2)); + if (i < ETH_MAX_REMAP_WIN) + orion5x_write(ETH_WIN_REMAP(i), 0); + } + + /* + * Setup windows for DDR banks. + */ + for (i = 0; i < DDR_MAX_CS; i++) { + u32 base, size; + size = orion5x_read(DDR_SIZE_CS(i)); + base = orion5x_read(DDR_BASE_CS(i)); + if (size & DDR_BANK_EN) { + base = DDR_REG_TO_BASE(base); + size = DDR_REG_TO_SIZE(size); + orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000); + orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) | + (ATTR_DDR_CS(i) << 8) | + TARGET_DDR); + orion5x_clrbits(ETH_WIN_EN, 1 << i); + orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2)); + } + } +} diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c new file mode 100644 index 00000000000..439c7784af0 --- /dev/null +++ b/arch/arm/mach-orion5x/common.c @@ -0,0 +1,391 @@ +/* + * arch/arm/mach-orion5x/common.c + * + * Core functions for Marvell Orion 5x SoCs + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +/***************************************************************************** + * I/O Address Mapping + ****************************************************************************/ +static struct map_desc orion5x_io_desc[] __initdata = { + { + .virtual = ORION5X_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_REGS_PHYS_BASE), + .length = ORION5X_REGS_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION5X_PCIE_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE), + .length = ORION5X_PCIE_IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION5X_PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE), + .length = ORION5X_PCI_IO_SIZE, + .type = MT_DEVICE + }, + { + .virtual = ORION5X_PCIE_WA_VIRT_BASE, + .pfn = __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE), + .length = ORION5X_PCIE_WA_SIZE, + .type = MT_DEVICE + }, +}; + +void __init orion5x_map_io(void) +{ + iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc)); +} + +/***************************************************************************** + * UART + ****************************************************************************/ + +static struct resource orion5x_uart_resources[] = { + { + .start = UART0_PHYS_BASE, + .end = UART0_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_UART0, + .end = IRQ_ORION5X_UART0, + .flags = IORESOURCE_IRQ, + }, + { + .start = UART1_PHYS_BASE, + .end = UART1_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_UART1, + .end = IRQ_ORION5X_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct plat_serial8250_port orion5x_uart_data[] = { + { + .mapbase = UART0_PHYS_BASE, + .membase = (char *)UART0_VIRT_BASE, + .irq = IRQ_ORION5X_UART0, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = ORION5X_TCLK, + }, + { + .mapbase = UART1_PHYS_BASE, + .membase = (char *)UART1_VIRT_BASE, + .irq = IRQ_ORION5X_UART1, + .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = ORION5X_TCLK, + }, + { }, +}; + +static struct platform_device orion5x_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = orion5x_uart_data, + }, + .resource = orion5x_uart_resources, + .num_resources = ARRAY_SIZE(orion5x_uart_resources), +}; + +/******************************************************************************* + * USB Controller - 2 interfaces + ******************************************************************************/ + +static struct resource orion5x_ehci0_resources[] = { + { + .start = ORION5X_USB0_PHYS_BASE, + .end = ORION5X_USB0_PHYS_BASE + SZ_4K, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_USB0_CTRL, + .end = IRQ_ORION5X_USB0_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource orion5x_ehci1_resources[] = { + { + .start = ORION5X_USB1_PHYS_BASE, + .end = ORION5X_USB1_PHYS_BASE + SZ_4K, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_ORION5X_USB1_CTRL, + .end = IRQ_ORION5X_USB1_CTRL, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct orion_ehci_data orion5x_ehci_data = { + .dram = &orion5x_mbus_dram_info, +}; + +static u64 ehci_dmamask = 0xffffffffUL; + +static struct platform_device orion5x_ehci0 = { + .name = "orion-ehci", + .id = 0, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, + }, + .resource = orion5x_ehci0_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci0_resources), +}; + +static struct platform_device orion5x_ehci1 = { + .name = "orion-ehci", + .id = 1, + .dev = { + .dma_mask = &ehci_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &orion5x_ehci_data, + }, + .resource = orion5x_ehci1_resources, + .num_resources = ARRAY_SIZE(orion5x_ehci1_resources), +}; + +/***************************************************************************** + * Gigabit Ethernet port + * (The Orion and Discovery (MV643xx) families use the same Ethernet driver) + ****************************************************************************/ + +static struct resource orion5x_eth_shared_resources[] = { + { + .start = ORION5X_ETH_PHYS_BASE + 0x2000, + .end = ORION5X_ETH_PHYS_BASE + 0x3fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion5x_eth_shared = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = 1, + .resource = orion5x_eth_shared_resources, +}; + +static struct resource orion5x_eth_resources[] = { + { + .name = "eth irq", + .start = IRQ_ORION5X_ETH_SUM, + .end = IRQ_ORION5X_ETH_SUM, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device orion5x_eth = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = 1, + .resource = orion5x_eth_resources, +}; + +void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) +{ + orion5x_eth.dev.platform_data = eth_data; + platform_device_register(&orion5x_eth_shared); + platform_device_register(&orion5x_eth); +} + +/***************************************************************************** + * I2C controller + * (The Orion and Discovery (MV643xx) families share the same I2C controller) + ****************************************************************************/ + +static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { + .freq_m = 8, /* assumes 166 MHz TCLK */ + .freq_n = 3, + .timeout = 1000, /* Default timeout of 1 second */ +}; + +static struct resource orion5x_i2c_resources[] = { + { + .name = "i2c base", + .start = I2C_PHYS_BASE, + .end = I2C_PHYS_BASE + 0x20 -1, + .flags = IORESOURCE_MEM, + }, + { + .name = "i2c irq", + .start = IRQ_ORION5X_I2C, + .end = IRQ_ORION5X_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_i2c = { + .name = MV64XXX_I2C_CTLR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(orion5x_i2c_resources), + .resource = orion5x_i2c_resources, + .dev = { + .platform_data = &orion5x_i2c_pdata, + }, +}; + +/***************************************************************************** + * Sata port + ****************************************************************************/ +static struct resource orion5x_sata_resources[] = { + { + .name = "sata base", + .start = ORION5X_SATA_PHYS_BASE, + .end = ORION5X_SATA_PHYS_BASE + 0x5000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "sata irq", + .start = IRQ_ORION5X_SATA, + .end = IRQ_ORION5X_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_sata = { + .name = "sata_mv", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(orion5x_sata_resources), + .resource = orion5x_sata_resources, +}; + +void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) +{ + sata_data->dram = &orion5x_mbus_dram_info; + orion5x_sata.dev.platform_data = sata_data; + platform_device_register(&orion5x_sata); +} + +/***************************************************************************** + * Time handling + ****************************************************************************/ + +static void orion5x_timer_init(void) +{ + orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK); +} + +struct sys_timer orion5x_timer = { + .init = orion5x_timer_init, +}; + +/***************************************************************************** + * General + ****************************************************************************/ + +/* + * Identify device ID and rev from PCIE configuration header space '0'. + */ +static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +{ + orion5x_pcie_id(dev, rev); + + if (*dev == MV88F5281_DEV_ID) { + if (*rev == MV88F5281_REV_D2) { + *dev_name = "MV88F5281-D2"; + } else if (*rev == MV88F5281_REV_D1) { + *dev_name = "MV88F5281-D1"; + } else { + *dev_name = "MV88F5281-Rev-Unsupported"; + } + } else if (*dev == MV88F5182_DEV_ID) { + if (*rev == MV88F5182_REV_A2) { + *dev_name = "MV88F5182-A2"; + } else { + *dev_name = "MV88F5182-Rev-Unsupported"; + } + } else if (*dev == MV88F5181_DEV_ID) { + if (*rev == MV88F5181_REV_B1) { + *dev_name = "MV88F5181-Rev-B1"; + } else { + *dev_name = "MV88F5181-Rev-Unsupported"; + } + } else { + *dev_name = "Device-Unknown"; + } +} + +void __init orion5x_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + orion5x_setup_eth_wins(); + + /* + * Register devices. + */ + platform_device_register(&orion5x_uart); + platform_device_register(&orion5x_ehci0); + if (dev == MV88F5182_DEV_ID) + platform_device_register(&orion5x_ehci1); + platform_device_register(&orion5x_i2c); +} + +/* + * Many orion-based systems have buggy bootloader implementations. + * This is a common fixup for bogus memory tags. + */ +void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t, + char **from, struct meminfo *meminfo) +{ + for (; t->hdr.size; t = tag_next(t)) + if (t->hdr.tag == ATAG_MEM && + (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || + t->u.mem.start & ~PAGE_MASK)) { + printk(KERN_WARNING + "Clearing invalid memory bank %dKB@0x%08x\n", + t->u.mem.size / 1024, t->u.mem.start); + t->hdr.tag = 0; + } +} diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h new file mode 100644 index 00000000000..f4c4c9a72a7 --- /dev/null +++ b/arch/arm/mach-orion5x/common.h @@ -0,0 +1,72 @@ +#ifndef __ARCH_ORION5X_COMMON_H +#define __ARCH_ORION5X_COMMON_H + +/* + * Basic Orion init functions used early by machine-setup. + */ + +void orion5x_map_io(void); +void orion5x_init_irq(void); +void orion5x_init(void); +extern struct sys_timer orion5x_timer; + +/* + * Enumerations and functions for Orion windows mapping. Used by Orion core + * functions to map its interfaces and by the machine-setup to map its on- + * board devices. Details in /mach-orion/addr-map.c + */ +extern struct mbus_dram_target_info orion5x_mbus_dram_info; +void orion5x_setup_cpu_mbus_bridge(void); +void orion5x_setup_dev_boot_win(u32 base, u32 size); +void orion5x_setup_dev0_win(u32 base, u32 size); +void orion5x_setup_dev1_win(u32 base, u32 size); +void orion5x_setup_dev2_win(u32 base, u32 size); +void orion5x_setup_pcie_wa_win(u32 base, u32 size); +void orion5x_setup_eth_wins(void); + +/* + * Shared code used internally by other Orion core functions. + * (/mach-orion/pci.c) + */ + +struct pci_sys_data; +struct pci_bus; + +void orion5x_pcie_id(u32 *dev, u32 *rev); +int orion5x_pcie_local_bus_nr(void); +int orion5x_pci_local_bus_nr(void); +int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); +struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); + +/* + * Valid GPIO pins according to MPP setup, used by machine-setup. + * (/mach-orion/gpio.c). + */ + +void orion5x_gpio_set_valid_pins(u32 pins); +void gpio_display(void); /* debug */ + +/* + * Pull in Orion Ethernet platform_data, used by machine-setup + */ + +struct mv643xx_eth_platform_data; + +void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); + +/* + * Orion Sata platform_data, used by machine-setup + */ + +struct mv_sata_platform_data; + +void orion5x_sata_init(struct mv_sata_platform_data *sata_data); + +struct machine_desc; +struct meminfo; +struct tag; +extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *, + char **, struct meminfo *); + + +#endif diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c new file mode 100644 index 00000000000..872aed37232 --- /dev/null +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -0,0 +1,361 @@ +/* + * arch/arm/mach-orion5x/db88f5281-setup.c + * + * Marvell Orion-2 Development Board Setup + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +/***************************************************************************** + * DB-88F5281 on board devices + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define DB88F5281_NOR_BOOT_BASE 0xf4000000 +#define DB88F5281_NOR_BOOT_SIZE SZ_512K + +/* + * 7-Segment on Device bus chip select 0 + */ + +#define DB88F5281_7SEG_BASE 0xfa000000 +#define DB88F5281_7SEG_SIZE SZ_1K + +/* + * 32M NOR flash on Device bus chip select 1 + */ + +#define DB88F5281_NOR_BASE 0xfc000000 +#define DB88F5281_NOR_SIZE SZ_32M + +/* + * 32M NAND flash on Device bus chip select 2 + */ + +#define DB88F5281_NAND_BASE 0xfa800000 +#define DB88F5281_NAND_SIZE SZ_1K + +/* + * PCI + */ + +#define DB88F5281_PCI_SLOT0_OFFS 7 +#define DB88F5281_PCI_SLOT0_IRQ_PIN 12 +#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13 + +/***************************************************************************** + * 512M NOR Flash on Device bus Boot CS + ****************************************************************************/ + +static struct physmap_flash_data db88f5281_boot_flash_data = { + .width = 1, /* 8 bit bus width */ +}; + +static struct resource db88f5281_boot_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NOR_BOOT_BASE, + .end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device db88f5281_boot_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &db88f5281_boot_flash_data, + }, + .num_resources = 1, + .resource = &db88f5281_boot_flash_resource, +}; + +/***************************************************************************** + * 32M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data db88f5281_nor_flash_data = { + .width = 4, /* 32 bit bus width */ +}; + +static struct resource db88f5281_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NOR_BASE, + .end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1, +}; + +static struct platform_device db88f5281_nor_flash = { + .name = "physmap-flash", + .id = 1, + .dev = { + .platform_data = &db88f5281_nor_flash_data, + }, + .num_resources = 1, + .resource = &db88f5281_nor_flash_resource, +}; + +/***************************************************************************** + * 32M NAND Flash on Device bus CS2 + ****************************************************************************/ + +static struct mtd_partition db88f5281_nand_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "root", + .offset = SZ_2M, + .size = (SZ_16M - SZ_2M), + }, + { + .name = "user", + .offset = SZ_16M, + .size = SZ_8M, + }, + { + .name = "recovery", + .offset = (SZ_16M + SZ_8M), + .size = SZ_8M, + }, +}; + +static struct resource db88f5281_nand_resource = { + .flags = IORESOURCE_MEM, + .start = DB88F5281_NAND_BASE, + .end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1, +}; + +static struct orion_nand_data db88f5281_nand_data = { + .parts = db88f5281_nand_parts, + .nr_parts = ARRAY_SIZE(db88f5281_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device db88f5281_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &db88f5281_nand_data, + }, + .resource = &db88f5281_nand_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * 7-Segment on Device bus CS0 + * Dummy counter every 2 sec + ****************************************************************************/ + +static void __iomem *db88f5281_7seg; +static struct timer_list db88f5281_timer; + +static void db88f5281_7seg_event(unsigned long data) +{ + static int count = 0; + writel(0, db88f5281_7seg + (count << 4)); + count = (count + 1) & 7; + mod_timer(&db88f5281_timer, jiffies + 2 * HZ); +} + +static int __init db88f5281_7seg_init(void) +{ + if (machine_is_db88f5281()) { + db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE, + DB88F5281_7SEG_SIZE); + if (!db88f5281_7seg) { + printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n"); + return -EIO; + } + setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0); + mod_timer(&db88f5281_timer, jiffies + 2 * HZ); + } + + return 0; +} + +__initcall(db88f5281_7seg_init); + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init db88f5281_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = DB88F5281_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int1") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "db88f5281_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); + } + + pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; + if (gpio_request(pin, "PCI Int2") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "db88f5281_pci_preinit faield " + "to set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCIE IRQ is connected internally (not GPIO) + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - DB88F5281_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN); + case 1: + case 2: + return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci db88f5281_pci __initdata = { + .nr_controllers = 2, + .preinit = db88f5281_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = db88f5281_pci_map_irq, +}; + +static int __init db88f5281_pci_init(void) +{ + if (machine_is_db88f5281()) + pci_common_init(&db88f5281_pci); + + return 0; +} + +subsys_initcall(db88f5281_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ +static struct mv643xx_eth_platform_data db88f5281_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC DS1339 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata db88f5281_i2c_rtc = { + .driver_name = "rtc-ds1307", + .type = "ds1339", + .addr = 0x68, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *db88f5281_devs[] __initdata = { + &db88f5281_boot_flash, + &db88f5281_nor_flash, + &db88f5281_nand_flash, +}; + +static void __init db88f5281_init(void) +{ + /* + * Basic Orion setup. Need to be called early. + */ + orion5x_init(); + + /* + * Setup the CPU address decode windows for our on-board devices + */ + orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE, + DB88F5281_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE); + orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE); + orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE); + + /* + * Setup Multiplexing Pins: + * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input) + * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2] + * MPP4: PCI_REQn[3] MPP5: PCI_GNTn[3] + * MPP6: GPIO (JP0, CON17.2) MPP7: GPIO (JP1, CON17.1) + * MPP8: GPIO (JP2, CON11.2) MPP9: GPIO (JP3, CON11.3) + * MPP10: GPIO (RTC int) MPP11: GPIO (Baud Rate Generator) + * MPP12: GPIO (PCI int 1) MPP13: GPIO (PCI int 2) + * MPP14: NAND_REn[2] MPP15: NAND_WEn[2] + * MPP16: UART1_RX MPP17: UART1_TX + * MPP18: UART1_CTS MPP19: UART1_RTS + * MPP-DEV: DEV_D[16:31] + */ + orion5x_write(MPP_0_7_CTRL, 0x00222203); + orion5x_write(MPP_8_15_CTRL, 0x44000000); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); + + orion5x_gpio_set_valid_pins(0x00003fc3); + + platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs)); + i2c_register_board_info(0, &db88f5281_i2c_rtc, 1); + orion5x_eth_init(&db88f5281_eth_data); +} + +MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") + /* Maintainer: Tzachi Perelstein */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = db88f5281_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, +MACHINE_END diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c new file mode 100644 index 00000000000..d67790ef236 --- /dev/null +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -0,0 +1,320 @@ +/* + * arch/arm/mach-orion5x/dns323-setup.c + * + * Copyright (C) 2007 Herbert Valerio Riedel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +#define DNS323_GPIO_LED_RIGHT_AMBER 1 +#define DNS323_GPIO_LED_LEFT_AMBER 2 +#define DNS323_GPIO_LED_POWER 5 +#define DNS323_GPIO_OVERTEMP 6 +#define DNS323_GPIO_RTC 7 +#define DNS323_GPIO_POWER_OFF 8 +#define DNS323_GPIO_KEY_POWER 9 +#define DNS323_GPIO_KEY_RESET 10 + +/**************************************************************************** + * PCI setup + */ + +static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* PCI-E */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + pr_err("%s: requested mapping for unknown bus\n", __func__); + + return -1; +} + +static struct hw_pci dns323_pci __initdata = { + .nr_controllers = 1, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = dns323_pci_map_irq, +}; + +static int __init dns323_pci_init(void) +{ + if (machine_is_dns323()) + pci_common_init(&dns323_pci); + + return 0; +} + +subsys_initcall(dns323_pci_init); + +/**************************************************************************** + * Ethernet + */ + +static struct mv643xx_eth_platform_data dns323_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/**************************************************************************** + * 8MiB NOR flash (Spansion S29GL064M90TFIR4) + * + * Layout as used by D-Link: + * 0x00000000-0x00010000 : "MTD1" + * 0x00010000-0x00020000 : "MTD2" + * 0x00020000-0x001a0000 : "Linux Kernel" + * 0x001a0000-0x007d0000 : "File System" + * 0x007d0000-0x00800000 : "u-boot" + */ + +#define DNS323_NOR_BOOT_BASE 0xf4000000 +#define DNS323_NOR_BOOT_SIZE SZ_8M + +static struct mtd_partition dns323_partitions[] = { + { + .name = "MTD1", + .size = 0x00010000, + .offset = 0, + }, { + .name = "MTD2", + .size = 0x00010000, + .offset = 0x00010000, + }, { + .name = "Linux Kernel", + .size = 0x00180000, + .offset = 0x00020000, + }, { + .name = "File System", + .size = 0x00630000, + .offset = 0x001A0000, + }, { + .name = "u-boot", + .size = 0x00030000, + .offset = 0x007d0000, + } +}; + +static struct physmap_flash_data dns323_nor_flash_data = { + .width = 1, + .parts = dns323_partitions, + .nr_parts = ARRAY_SIZE(dns323_partitions) +}; + +static struct resource dns323_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = DNS323_NOR_BOOT_BASE, + .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device dns323_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &dns323_nor_flash_data, }, + .resource = &dns323_nor_flash_resource, + .num_resources = 1, +}; + +/**************************************************************************** + * GPIO LEDs (simple - doesn't use hardware blinking support) + */ + +static struct gpio_led dns323_leds[] = { + { + .name = "power:blue", + .gpio = DNS323_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "right:amber", + .gpio = DNS323_GPIO_LED_RIGHT_AMBER, + .active_low = 1, + }, { + .name = "left:amber", + .gpio = DNS323_GPIO_LED_LEFT_AMBER, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dns323_led_data = { + .num_leds = ARRAY_SIZE(dns323_leds), + .leds = dns323_leds, +}; + +static struct platform_device dns323_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &dns323_led_data, }, +}; + +/**************************************************************************** + * GPIO Attached Keys + */ + +static struct gpio_keys_button dns323_buttons[] = { + { + .code = KEY_RESTART, + .gpio = DNS323_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + }, + { + .code = KEY_POWER, + .gpio = DNS323_GPIO_KEY_POWER, + .desc = "Power Button", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data dns323_button_data = { + .buttons = dns323_buttons, + .nbuttons = ARRAY_SIZE(dns323_buttons), +}; + +static struct platform_device dns323_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { .platform_data = &dns323_button_data, }, +}; + +/**************************************************************************** + * General Setup + */ + +static struct platform_device *dns323_plat_devices[] __initdata = { + &dns323_nor_flash, + &dns323_gpio_leds, + &dns323_button_device, +}; + +/* + * On the DNS-323 the following devices are attached via I2C: + * + * i2c addr | chip | description + * 0x3e | GMT G760Af | fan speed PWM controller + * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) + * 0x68 | ST M41T80 | RTC w/ alarm + */ +static struct i2c_board_info __initdata dns323_i2c_devices[] = { + { + I2C_BOARD_INFO("g760a", 0x3e), + .type = "g760a", + }, +#if 0 + /* this entry requires the new-style driver model lm75 driver, + * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ + { + I2C_BOARD_INFO("lm75", 0x48), + .type = "g751", + }, +#endif + { + I2C_BOARD_INFO("rtc-m41t80", 0x68), + .type = "m41t80", + } +}; + +/* DNS-323 specific power off method */ +static void dns323_power_off(void) +{ + pr_info("%s: triggering power-off...\n", __func__); + gpio_set_value(DNS323_GPIO_POWER_OFF, 1); +} + +static void __init dns323_init(void) +{ + /* Setup basic Orion functions. Need to be called early. */ + orion5x_init(); + + /* setup flash mapping + * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 + */ + orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); + + /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE + * + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ + orion5x_write(MPP_0_7_CTRL, 0); + orion5x_write(MPP_8_15_CTRL, 0); + orion5x_write(MPP_16_19_CTRL, 0); + orion5x_write(MPP_DEV_CTRL, 0); + + /* Define used GPIO pins + + GPIO Map: + + | 0 | | PEX_RST_OUT (not controlled by GPIO) + | 1 | Out | right amber LED (= sata ch0 LED) (low-active) + | 2 | Out | left amber LED (= sata ch1 LED) (low-active) + | 3 | Out | //unknown// + | 4 | Out | power button LED (low-active, together with pin #5) + | 5 | Out | power button LED (low-active, together with pin #4) + | 6 | In | GMT G751-2f overtemp. shutdown signal (low-active) + | 7 | In | M41T80 nIRQ/OUT/SQW signal + | 8 | Out | triggers power off (high-active) + | 9 | In | power button switch (low-active) + | 10 | In | reset button switch (low-active) + | 11 | Out | //unknown// + | 12 | Out | //unknown// + | 13 | Out | //unknown// + | 14 | Out | //unknown// + | 15 | Out | //unknown// + */ + orion5x_gpio_set_valid_pins(0x07f6); + + /* register dns323 specific power-off method */ + if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0) + || (gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)) + pr_err("DNS323: failed to setup power-off GPIO\n"); + + pm_power_off = dns323_power_off; + + /* register flash and other platform devices */ + platform_add_devices(dns323_plat_devices, + ARRAY_SIZE(dns323_plat_devices)); + + i2c_register_board_info(0, dns323_i2c_devices, + ARRAY_SIZE(dns323_i2c_devices)); + + orion5x_eth_init(&dns323_eth_data); +} + +/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ +MACHINE_START(DNS323, "D-Link DNS-323") + /* Maintainer: Herbert Valerio Riedel */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = dns323_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c new file mode 100644 index 00000000000..8108c316c42 --- /dev/null +++ b/arch/arm/mach-orion5x/gpio.c @@ -0,0 +1,226 @@ +/* + * arch/arm/mach-orion5x/gpio.c + * + * GPIO functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +static DEFINE_SPINLOCK(gpio_lock); +static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)]; +static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */ + +void __init orion5x_gpio_set_valid_pins(u32 pins) +{ + gpio_valid[0] = pins; +} + +/* + * GENERIC_GPIO primitives + */ +int gpio_direction_input(unsigned pin) +{ + unsigned long flags; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * Some callers might have not used the gpio_request(), + * so flag this pin as requested now. + */ + if (!gpio_label[pin]) + gpio_label[pin] = "?"; + + orion5x_setbits(GPIO_IO_CONF, 1 << pin); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned pin, int value) +{ + unsigned long flags; + int mask; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + /* + * Some callers might have not used the gpio_request(), + * so flag this pin as requested now. + */ + if (!gpio_label[pin]) + gpio_label[pin] = "?"; + + mask = 1 << pin; + orion5x_clrbits(GPIO_BLINK_EN, mask); + if (value) + orion5x_setbits(GPIO_OUT, mask); + else + orion5x_clrbits(GPIO_OUT, mask); + orion5x_clrbits(GPIO_IO_CONF, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned pin) +{ + int val, mask = 1 << pin; + + if (orion5x_read(GPIO_IO_CONF) & mask) + val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL); + else + val = orion5x_read(GPIO_OUT); + + return val & mask; +} +EXPORT_SYMBOL(gpio_get_value); + +void gpio_set_value(unsigned pin, int value) +{ + unsigned long flags; + int mask = 1 << pin; + + spin_lock_irqsave(&gpio_lock, flags); + + orion5x_clrbits(GPIO_BLINK_EN, mask); + if (value) + orion5x_setbits(GPIO_OUT, mask); + else + orion5x_clrbits(GPIO_OUT, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(gpio_set_value); + +void orion5x_gpio_set_blink(unsigned pin, int blink) +{ + unsigned long flags; + int mask = 1 << pin; + + spin_lock_irqsave(&gpio_lock, flags); + + orion5x_clrbits(GPIO_OUT, mask); + if (blink) + orion5x_setbits(GPIO_BLINK_EN, mask); + else + orion5x_clrbits(GPIO_BLINK_EN, mask); + + spin_unlock_irqrestore(&gpio_lock, flags); +} +EXPORT_SYMBOL(orion5x_gpio_set_blink); + +int gpio_request(unsigned pin, const char *label) +{ + int ret = 0; + unsigned long flags; + + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return -EINVAL; + } + + spin_lock_irqsave(&gpio_lock, flags); + + if (gpio_label[pin]) { + pr_debug("%s: GPIO %d already used as %s\n", + __func__, pin, gpio_label[pin]); + ret = -EBUSY; + } else + gpio_label[pin] = label ? label : "?"; + + spin_unlock_irqrestore(&gpio_lock, flags); + return ret; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned pin) +{ + if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) { + pr_debug("%s: invalid GPIO %d\n", __func__, pin); + return; + } + + if (!gpio_label[pin]) + pr_warning("%s: GPIO %d already freed\n", __func__, pin); + else + gpio_label[pin] = NULL; +} +EXPORT_SYMBOL(gpio_free); + +/* Debug helper */ +void gpio_display(void) +{ + int i; + + for (i = 0; i < GPIO_MAX; i++) { + printk(KERN_DEBUG "Pin-%d: ", i); + + if (!test_bit(i, gpio_valid)) { + printk("non-GPIO\n"); + } else if (!gpio_label[i]) { + printk("GPIO, free\n"); + } else { + printk("GPIO, used by %s, ", gpio_label[i]); + if (orion5x_read(GPIO_IO_CONF) & (1 << i)) { + printk("input, active %s, level %s, edge %s\n", + ((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high", + ((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked", + ((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked"); + } else { + printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1); + } + } + } + + printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n", + MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL)); + printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n", + MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL)); + printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n", + MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL)); + printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n", + MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL)); + printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n", + GPIO_OUT, orion5x_read(GPIO_OUT)); + printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n", + GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF)); + printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n", + GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN)); + printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n", + GPIO_IN_POL, orion5x_read(GPIO_IN_POL)); + printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n", + GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN)); + printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n", + GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK)); + printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n", + GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE)); + printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n", + GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK)); +} diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c new file mode 100644 index 00000000000..dd21f38c5d3 --- /dev/null +++ b/arch/arm/mach-orion5x/irq.c @@ -0,0 +1,211 @@ +/* + * arch/arm/mach-orion5x/irq.c + * + * Core IRQ functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +/***************************************************************************** + * Orion GPIO IRQ + * + * GPIO_IN_POL register controlls whether GPIO_DATA_IN will hold the same + * value of the line or the opposite value. + * + * Level IRQ handlers: DATA_IN is used directly as cause register. + * Interrupt are masked by LEVEL_MASK registers. + * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. + * Interrupt are masked by EDGE_MASK registers. + * Both-edge handlers: Similar to regular Edge handlers, but also swaps + * the polarity to catch the next line transaction. + * This is a race condition that might not perfectly + * work on some use cases. + * + * Every eight GPIO lines are grouped (OR'ed) before going up to main + * cause register. + * + * EDGE cause mask + * data-in /--------| |-----| |----\ + * -----| |----- ---- to main cause reg + * X \----------------| |----/ + * polarity LEVEL mask + * + ****************************************************************************/ +static void orion5x_gpio_irq_ack(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + /* + * Mask bit for level interrupt + */ + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); + else + /* + * Clear casue bit for egde interrupt + */ + orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin); +} + +static void orion5x_gpio_irq_mask(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin); + else + orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin); +} + +static void orion5x_gpio_irq_unmask(u32 irq) +{ + int pin = irq_to_gpio(irq); + if (irq_desc[irq].status & IRQ_LEVEL) + orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin); + else + orion5x_setbits(GPIO_EDGE_MASK, 1 << pin); +} + +static int orion5x_gpio_set_irq_type(u32 irq, u32 type) +{ + int pin = irq_to_gpio(irq); + struct irq_desc *desc; + + if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) { + printk(KERN_ERR "orion5x_gpio_set_irq_type failed " + "(irq %d, pin %d).\n", irq, pin); + return -EINVAL; + } + + desc = irq_desc + irq; + + switch (type) { + case IRQT_HIGH: + desc->handle_irq = handle_level_irq; + desc->status |= IRQ_LEVEL; + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_LOW: + desc->handle_irq = handle_level_irq; + desc->status |= IRQ_LEVEL; + orion5x_setbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_RISING: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_FALLING: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + orion5x_setbits(GPIO_IN_POL, (1 << pin)); + break; + case IRQT_BOTHEDGE: + desc->handle_irq = handle_edge_irq; + desc->status &= ~IRQ_LEVEL; + /* + * set initial polarity based on current input level + */ + if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN)) + & (1 << pin)) + orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */ + else + orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */ + + break; + default: + printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type); + return -EINVAL; + } + + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= type & IRQ_TYPE_SENSE_MASK; + + return 0; +} + +static struct irq_chip orion5x_gpio_irq_chip = { + .name = "Orion-IRQ-GPIO", + .ack = orion5x_gpio_irq_ack, + .mask = orion5x_gpio_irq_mask, + .unmask = orion5x_gpio_irq_unmask, + .set_type = orion5x_gpio_set_irq_type, +}; + +static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + u32 cause, offs, pin; + + BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31); + offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8; + cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) | + (orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK)); + + for (pin = offs; pin < offs + 8; pin++) { + if (cause & (1 << pin)) { + irq = gpio_to_irq(pin); + desc = irq_desc + irq; + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + /* Swap polarity (race with GPIO line) */ + u32 polarity = orion5x_read(GPIO_IN_POL); + polarity ^= 1 << pin; + orion5x_write(GPIO_IN_POL, polarity); + } + desc_handle_irq(irq, desc); + } + } +} + +static void __init orion5x_init_gpio_irq(void) +{ + int i; + struct irq_desc *desc; + + /* + * Mask and clear GPIO IRQ interrupts + */ + orion5x_write(GPIO_LEVEL_MASK, 0x0); + orion5x_write(GPIO_EDGE_MASK, 0x0); + orion5x_write(GPIO_EDGE_CAUSE, 0x0); + + /* + * Register chained level handlers for GPIO IRQs by default. + * User can use set_type() if he wants to use edge types handlers. + */ + for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) { + set_irq_chip(i, &orion5x_gpio_irq_chip); + set_irq_handler(i, handle_level_irq); + desc = irq_desc + i; + desc->status |= IRQ_LEVEL; + set_irq_flags(i, IRQF_VALID); + } + set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler); + set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler); +} + +/***************************************************************************** + * Orion Main IRQ + ****************************************************************************/ +static void __init orion5x_init_main_irq(void) +{ + orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK); +} + +void __init orion5x_init_irq(void) +{ + orion5x_init_main_irq(); + orion5x_init_gpio_irq(); +} diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c new file mode 100644 index 00000000000..8ad4390b4b7 --- /dev/null +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -0,0 +1,243 @@ +/* + * arch/arm/mach-orion5x/kurobox_pro-setup.c + * + * Maintainer: Ronen Shitrit + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +/***************************************************************************** + * KUROBOX-PRO Info + ****************************************************************************/ + +/* + * 256K NOR flash Device bus boot chip select + */ + +#define KUROBOX_PRO_NOR_BOOT_BASE 0xf4000000 +#define KUROBOX_PRO_NOR_BOOT_SIZE SZ_256K + +/* + * 256M NAND flash on Device bus chip select 1 + */ + +#define KUROBOX_PRO_NAND_BASE 0xfc000000 +#define KUROBOX_PRO_NAND_SIZE SZ_2M + +/***************************************************************************** + * 256MB NAND Flash on Device bus CS0 + ****************************************************************************/ + +static struct mtd_partition kurobox_pro_nand_parts[] = { + { + .name = "uImage", + .offset = 0, + .size = SZ_4M, + }, + { + .name = "rootfs", + .offset = SZ_4M, + .size = SZ_64M, + }, + { + .name = "extra", + .offset = SZ_4M + SZ_64M, + .size = SZ_256M - (SZ_4M + SZ_64M), + }, +}; + +static struct resource kurobox_pro_nand_resource = { + .flags = IORESOURCE_MEM, + .start = KUROBOX_PRO_NAND_BASE, + .end = KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1, +}; + +static struct orion_nand_data kurobox_pro_nand_data = { + .parts = kurobox_pro_nand_parts, + .nr_parts = ARRAY_SIZE(kurobox_pro_nand_parts), + .cle = 0, + .ale = 1, + .width = 8, +}; + +static struct platform_device kurobox_pro_nand_flash = { + .name = "orion_nand", + .id = -1, + .dev = { + .platform_data = &kurobox_pro_nand_data, + }, + .resource = &kurobox_pro_nand_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * 256KB NOR Flash on BOOT Device + ****************************************************************************/ + +static struct physmap_flash_data kurobox_pro_nor_flash_data = { + .width = 1, +}; + +static struct resource kurobox_pro_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = KUROBOX_PRO_NOR_BOOT_BASE, + .end = KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device kurobox_pro_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &kurobox_pro_nor_flash_data, + }, + .num_resources = 1, + .resource = &kurobox_pro_nor_flash_resource, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCI isn't used on the Kuro + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + else + printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n"); + + return -1; +} + +static struct hw_pci kurobox_pro_pci __initdata = { + .nr_controllers = 1, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = kurobox_pro_pci_map_irq, +}; + +static int __init kurobox_pro_pci_init(void) +{ + if (machine_is_kurobox_pro()) + pci_common_init(&kurobox_pro_pci); + + return 0; +} + +subsys_initcall(kurobox_pro_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data kurobox_pro_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC 5C372a on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { + .driver_name = "rtc-rs5c372", + .type = "rs5c372a", + .addr = 0x32, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data kurobox_pro_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *kurobox_pro_devices[] __initdata = { + &kurobox_pro_nor_flash, + &kurobox_pro_nand_flash, +}; + +static void __init kurobox_pro_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + /* + * Setup the CPU address decode windows for our devices + */ + orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, + KUROBOX_PRO_NOR_BOOT_SIZE); + orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* + * Setup Multiplexing Pins -- + * MPP[0-1] Not used + * MPP[2] GPIO Micon + * MPP[3] GPIO RTC + * MPP[4-5] Not used + * MPP[6] Nand Flash REn + * MPP[7] Nand Flash WEn + * MPP[8-11] Not used + * MPP[12] SATA 0 presence Indication + * MPP[13] SATA 1 presence Indication + * MPP[14] SATA 0 active Indication + * MPP[15] SATA 1 active indication + * MPP[16-19] Not used + */ + orion5x_write(MPP_0_7_CTRL, 0x44220003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x0); + + orion5x_gpio_set_valid_pins(0x0000000c); + + platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); + i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); + orion5x_eth_init(&kurobox_pro_eth_data); + orion5x_sata_init(&kurobox_pro_sata_data); +} + +MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") + /* Maintainer: Ronen Shitrit */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = kurobox_pro_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c new file mode 100644 index 00000000000..27b4afc8f48 --- /dev/null +++ b/arch/arm/mach-orion5x/pci.c @@ -0,0 +1,559 @@ +/* + * arch/arm/mach-orion5x/pci.c + * + * PCI and PCIe functions for Marvell Orion System On Chip + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include "common.h" + +/***************************************************************************** + * Orion has one PCIe controller and one PCI controller. + * + * Note1: The local PCIe bus number is '0'. The local PCI bus number + * follows the scanned PCIe bridged busses, if any. + * + * Note2: It is possible for PCI/PCIe agents to access many subsystem's + * space, by configuring BARs and Address Decode Windows, e.g. flashes on + * device bus, Orion registers, etc. However this code only enable the + * access to DDR banks. + ****************************************************************************/ + + +/***************************************************************************** + * PCIe controller + ****************************************************************************/ +#define PCIE_BASE ((void __iomem *)ORION5X_PCIE_VIRT_BASE) + +void __init orion5x_pcie_id(u32 *dev, u32 *rev) +{ + *dev = orion_pcie_dev_id(PCIE_BASE); + *rev = orion_pcie_rev(PCIE_BASE); +} + +int orion5x_pcie_local_bus_nr(void) +{ + return orion_pcie_get_local_bus_nr(PCIE_BASE); +} + +static int pcie_valid_config(int bus, int dev) +{ + /* + * Don't go out when trying to access -- + * 1. nonexisting device on local bus + * 2. where there's no device connected (no link) + */ + if (bus == 0 && dev == 0) + return 1; + + if (!orion_pcie_link_up(PCIE_BASE)) + return 0; + + if (bus == 0 && dev != 1) + return 0; + + return 1; +} + + +/* + * PCIe config cycles are done by programming the PCIE_CONF_ADDR register + * and then reading the PCIE_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pcie_lock); + +static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * We only support access to the non-extended configuration + * space when using the WA access method (or we would have to + * sacrifice 256M of CPU virtual address space.) + */ + if (where >= 0x100) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE, + bus, devfn, where, size, val); + + return ret; +} + +static int pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + unsigned long flags; + int ret; + + if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&orion5x_pcie_lock, flags); + ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val); + spin_unlock_irqrestore(&orion5x_pcie_lock, flags); + + return ret; +} + +static struct pci_ops pcie_ops = { + .read = pcie_rd_conf, + .write = pcie_wr_conf, +}; + + +static int __init pcie_setup(struct pci_sys_data *sys) +{ + struct resource *res; + int dev; + + /* + * Generic PCIe unit setup. + */ + orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info); + + /* + * Check whether to apply Orion-1/Orion-NAS PCIe config + * read transaction workaround. + */ + dev = orion_pcie_dev_id(PCIE_BASE); + if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { + printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config " + "read transaction workaround\n"); + pcie_ops.read = pcie_rd_conf_wa; + } + + /* + * Request resources. + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pcie_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCIe I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCIE_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCIe IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCIe Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCIE_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCIe Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + +/***************************************************************************** + * PCI controller + ****************************************************************************/ +#define PCI_MODE ORION5X_PCI_REG(0xd00) +#define PCI_CMD ORION5X_PCI_REG(0xc00) +#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) +#define PCI_CONF_ADDR ORION5X_PCI_REG(0xc78) +#define PCI_CONF_DATA ORION5X_PCI_REG(0xc7c) + +/* + * PCI_MODE bits + */ +#define PCI_MODE_64BIT (1 << 2) +#define PCI_MODE_PCIX ((1 << 4) | (1 << 5)) + +/* + * PCI_CMD bits + */ +#define PCI_CMD_HOST_REORDER (1 << 29) + +/* + * PCI_P2P_CONF bits + */ +#define PCI_P2P_BUS_OFFS 16 +#define PCI_P2P_BUS_MASK (0xff << PCI_P2P_BUS_OFFS) +#define PCI_P2P_DEV_OFFS 24 +#define PCI_P2P_DEV_MASK (0x1f << PCI_P2P_DEV_OFFS) + +/* + * PCI_CONF_ADDR bits + */ +#define PCI_CONF_REG(reg) ((reg) & 0xfc) +#define PCI_CONF_FUNC(func) (((func) & 0x3) << 8) +#define PCI_CONF_DEV(dev) (((dev) & 0x1f) << 11) +#define PCI_CONF_BUS(bus) (((bus) & 0xff) << 16) +#define PCI_CONF_ADDR_EN (1 << 31) + +/* + * Internal configuration space + */ +#define PCI_CONF_FUNC_STAT_CMD 0 +#define PCI_CONF_REG_STAT_CMD 4 +#define PCIX_STAT 0x64 +#define PCIX_STAT_BUS_OFFS 8 +#define PCIX_STAT_BUS_MASK (0xff << PCIX_STAT_BUS_OFFS) + +/* + * PCI Address Decode Windows registers + */ +#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0) +#define PCI_BAR_REMAP_DDR_CS(n) (((n) ==0) ? ORION5X_PCI_REG(0xc48) : \ + ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \ + ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \ + ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0) +#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c) +#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c) + +/* + * PCI configuration helpers for BAR settings + */ +#define PCI_CONF_FUNC_BAR_CS(n) ((n) >> 1) +#define PCI_CONF_REG_BAR_LO_CS(n) (((n) & 1) ? 0x18 : 0x10) +#define PCI_CONF_REG_BAR_HI_CS(n) (((n) & 1) ? 0x1c : 0x14) + +/* + * PCI config cycles are done by programming the PCI_CONF_ADDR register + * and then reading the PCI_CONF_DATA register. Need to make sure these + * transactions are atomic. + */ +static DEFINE_SPINLOCK(orion5x_pci_lock); + +int orion5x_pci_local_bus_nr(void) +{ + u32 conf = orion5x_read(PCI_P2P_CONF); + return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS); +} + +static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 *val) +{ + unsigned long flags; + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + *val = orion5x_read(PCI_CONF_DATA); + + if (size == 1) + *val = (*val >> (8*(where & 0x3))) & 0xff; + else if (size == 2) + *val = (*val >> (8*(where & 0x3))) & 0xffff; + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func, + u32 where, u32 size, u32 val) +{ + unsigned long flags; + int ret = PCIBIOS_SUCCESSFUL; + + spin_lock_irqsave(&orion5x_pci_lock, flags); + + orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) | + PCI_CONF_DEV(dev) | PCI_CONF_REG(where) | + PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN); + + if (size == 4) { + __raw_writel(val, PCI_CONF_DATA); + } else if (size == 2) { + __raw_writew(val, PCI_CONF_DATA + (where & 0x3)); + } else if (size == 1) { + __raw_writeb(val, PCI_CONF_DATA + (where & 0x3)); + } else { + ret = PCIBIOS_BAD_REGISTER_NUMBER; + } + + spin_unlock_irqrestore(&orion5x_pci_lock, flags); + + return ret; +} + +static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 *val) +{ + /* + * Don't go out for local device + */ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + if (bus->number == orion5x_pci_local_bus_nr() && + PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where, size, val); +} + +static struct pci_ops pci_ops = { + .read = orion5x_pci_rd_conf, + .write = orion5x_pci_wr_conf, +}; + +static void __init orion5x_pci_set_bus_nr(int nr) +{ + u32 p2p = orion5x_read(PCI_P2P_CONF); + + if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) { + /* + * PCI-X mode + */ + u32 pcix_status, bus, dev; + bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS; + dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS; + orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status); + pcix_status &= ~PCIX_STAT_BUS_MASK; + pcix_status |= (nr << PCIX_STAT_BUS_OFFS); + orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status); + } else { + /* + * PCI Conventional mode + */ + p2p &= ~PCI_P2P_BUS_MASK; + p2p |= (nr << PCI_P2P_BUS_OFFS); + orion5x_write(PCI_P2P_CONF, p2p); + } +} + +static void __init orion5x_pci_master_slave_enable(void) +{ + int bus_nr, func, reg; + u32 val; + + bus_nr = orion5x_pci_local_bus_nr(); + func = PCI_CONF_FUNC_STAT_CMD; + reg = PCI_CONF_REG_STAT_CMD; + orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val); + val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7); +} + +static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram) +{ + u32 win_enable; + int bus; + int i; + + /* + * First, disable windows. + */ + win_enable = 0xffffffff; + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Setup windows for DDR banks. + */ + bus = orion5x_pci_local_bus_nr(); + + for (i = 0; i < dram->num_cs; i++) { + struct mbus_dram_window *cs = dram->cs + i; + u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index); + u32 reg; + u32 val; + + /* + * Write DRAM bank base address register. + */ + reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index); + orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val); + val = (cs->base & 0xfffff000) | (val & 0xfff); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val); + + /* + * Write DRAM bank size register. + */ + reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index); + orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0); + orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index), + (cs->size - 1) & 0xfffff000); + orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index), + cs->base & 0xfffff000); + + /* + * Enable decode window for this chip select. + */ + win_enable &= ~(1 << cs->cs_index); + } + + /* + * Re-enable decode windows. + */ + orion5x_write(PCI_BAR_ENABLE, win_enable); + + /* + * Disable automatic update of address remaping when writing to BARs. + */ + orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1); +} + +static int __init pci_setup(struct pci_sys_data *sys) +{ + struct resource *res; + + /* + * Point PCI unit MBUS decode windows to DRAM space. + */ + orion5x_setup_pci_wins(&orion5x_mbus_dram_info); + + /* + * Master + Slave enable + */ + orion5x_pci_master_slave_enable(); + + /* + * Force ordering + */ + orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER); + + /* + * Request resources + */ + res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL); + if (!res) + panic("pci_setup unable to alloc resources"); + + /* + * IORESOURCE_IO + */ + res[0].name = "PCI I/O Space"; + res[0].flags = IORESOURCE_IO; + res[0].start = ORION5X_PCI_IO_BUS_BASE; + res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1; + if (request_resource(&ioport_resource, &res[0])) + panic("Request PCI IO resource failed\n"); + sys->resource[0] = &res[0]; + + /* + * IORESOURCE_MEM + */ + res[1].name = "PCI Memory Space"; + res[1].flags = IORESOURCE_MEM; + res[1].start = ORION5X_PCI_MEM_PHYS_BASE; + res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1; + if (request_resource(&iomem_resource, &res[1])) + panic("Request PCI Memory resource failed\n"); + sys->resource[1] = &res[1]; + + sys->resource[2] = NULL; + sys->io_offset = 0; + + return 1; +} + + +/***************************************************************************** + * General PCIe + PCI + ****************************************************************************/ +static void __devinit rc_pci_fixup(struct pci_dev *dev) +{ + /* + * Prevent enumeration of root complex. + */ + if (dev->bus->parent == NULL && dev->devfn == 0) { + int i; + + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); + +int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); + ret = pcie_setup(sys); + } else if (nr == 1) { + orion5x_pci_set_bus_nr(sys->busnr); + ret = pci_setup(sys); + } + + return ret; +} + +struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct pci_bus *bus; + + if (nr == 0) { + bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); + } else if (nr == 1) { + bus = pci_scan_bus(sys->busnr, &pci_ops, sys); + } else { + bus = NULL; + BUG(); + } + + return bus; +} diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c new file mode 100644 index 00000000000..37e8b2dc3ed --- /dev/null +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -0,0 +1,312 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * 512K NOR flash Device bus boot chip select + */ + +#define RD88F5182_NOR_BOOT_BASE 0xf4000000 +#define RD88F5182_NOR_BOOT_SIZE SZ_512K + +/* + * 16M NOR flash on Device bus chip select 1 + */ + +#define RD88F5182_NOR_BASE 0xfc000000 +#define RD88F5182_NOR_SIZE SZ_16M + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/* + * GPIO Debug LED + */ + +#define RD88F5182_GPIO_DBG_LED 0 + +/***************************************************************************** + * 16M NOR Flash on Device bus CS1 + ****************************************************************************/ + +static struct physmap_flash_data rd88f5182_nor_flash_data = { + .width = 1, +}; + +static struct resource rd88f5182_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = RD88F5182_NOR_BASE, + .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, +}; + +static struct platform_device rd88f5182_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rd88f5182_nor_flash_data, + }, + .num_resources = 1, + .resource = &rd88f5182_nor_flash_resource, +}; + +#ifdef CONFIG_LEDS + +/***************************************************************************** + * Use GPIO debug led as CPU active indication + ****************************************************************************/ + +static void rd88f5182_dbgled_event(led_event_t evt) +{ + int val; + + if (evt == led_idle_end) + val = 1; + else if (evt == led_idle_start) + val = 0; + else + return; + + gpio_set_value(RD88F5182_GPIO_DBG_LED, val); +} + +static int __init rd88f5182_dbgled_init(void) +{ + int pin; + + if (machine_is_rd88f5182()) { + pin = RD88F5182_GPIO_DBG_LED; + + if (gpio_request(pin, "DBGLED") == 0) { + if (gpio_direction_output(pin, 0) != 0) { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to set output pin %d\n", pin); + gpio_free(pin); + return 0; + } + } else { + printk(KERN_ERR "rd88f5182_dbgled_init failed " + "to request gpio %d\n", pin); + return 0; + } + + leds_event = rd88f5182_dbgled_event; + } + return 0; +} + +__initcall(rd88f5182_dbgled_init); + +#endif + +/***************************************************************************** + * PCI + ****************************************************************************/ + +void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit faield to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCI-E isn't used on the RD2 + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (machine_is_rd88f5182()) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data rd88f5182_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC DS1338 on I2C bus + ****************************************************************************/ +static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { + .driver_name = "rtc-ds1307", + .type = "ds1338", + .addr = 0x68, +}; + +/***************************************************************************** + * Sata + ****************************************************************************/ +static struct mv_sata_platform_data rd88f5182_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +static struct platform_device *rd88f5182_devices[] __initdata = { + &rd88f5182_nor_flash, +}; + +static void __init rd88f5182_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + /* + * Setup the CPU address decode windows for our devices + */ + orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, + RD88F5182_NOR_BOOT_SIZE); + orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* + * Setup Multiplexing Pins -- + * MPP[0] Debug Led (GPIO - Out) + * MPP[1] Debug Led (GPIO - Out) + * MPP[2] N/A + * MPP[3] RTC_Int (GPIO - In) + * MPP[4] GPIO + * MPP[5] GPIO + * MPP[6] PCI_intA (GPIO - In) + * MPP[7] PCI_intB (GPIO - In) + * MPP[8-11] N/A + * MPP[12] SATA 0 presence Indication + * MPP[13] SATA 1 presence Indication + * MPP[14] SATA 0 active Indication + * MPP[15] SATA 1 active indication + * MPP[16-19] Not used + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + orion5x_write(MPP_0_7_CTRL, 0x00000003); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5555); + + orion5x_gpio_set_valid_pins(0x000000fb); + + platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); + i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); + orion5x_eth_init(&rd88f5182_eth_data); + orion5x_sata_init(&rd88f5182_sata_data); +} + +MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") + /* Maintainer: Ronen Shitrit */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = rd88f5182_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, +MACHINE_END diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c new file mode 100644 index 00000000000..71b0cffa2fe --- /dev/null +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -0,0 +1,359 @@ +/* + * QNAP TS-109/TS-209 Board Setup + * + * Maintainer: Byron Bradley + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" + +#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000 +#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M + +/**************************************************************************** + * 8MiB NOR flash. The struct mtd_partition is not in the same order as the + * partitions on the device because we want to keep compatability with + * existing QNAP firmware. + * + * Layout as used by QNAP: + * [2] 0x00000000-0x00200000 : "Kernel" + * [3] 0x00200000-0x00600000 : "RootFS1" + * [4] 0x00600000-0x00700000 : "RootFS2" + * [6] 0x00700000-0x00760000 : "NAS Config" (read-only) + * [5] 0x00760000-0x00780000 : "U-Boot Config" + * [1] 0x00780000-0x00800000 : "U-Boot" (read-only) + ***************************************************************************/ +static struct mtd_partition qnap_ts209_partitions[] = { + { + .name = "U-Boot", + .size = 0x00080000, + .offset = 0x00780000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .size = 0x00200000, + .offset = 0, + }, { + .name = "RootFS1", + .size = 0x00400000, + .offset = 0x00200000, + }, { + .name = "RootFS2", + .size = 0x00100000, + .offset = 0x00600000, + }, { + .name = "U-Boot Config", + .size = 0x00020000, + .offset = 0x00760000, + }, { + .name = "NAS Config", + .size = 0x00060000, + .offset = 0x00700000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data qnap_ts209_nor_flash_data = { + .width = 1, + .parts = qnap_ts209_partitions, + .nr_parts = ARRAY_SIZE(qnap_ts209_partitions) +}; + +static struct resource qnap_ts209_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = QNAP_TS209_NOR_BOOT_BASE, + .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device qnap_ts209_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { .platform_data = &qnap_ts209_nor_flash_data, }, + .resource = &qnap_ts209_nor_flash_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * PCI + ****************************************************************************/ + +#define QNAP_TS209_PCI_SLOT0_OFFS 7 +#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6 +#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7 + +void __init qnap_ts209_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int1") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " + "%d\n", pin); + } + + pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; + if (gpio_request(pin, "PCI Int2") == 0) { + if (gpio_direction_input(pin) == 0) { + set_irq_type(gpio_to_irq(pin), IRQT_LOW); + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed " + "to set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request " + "%d\n", pin); + } +} + +static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * PCIE IRQ is connected internally (not GPIO) + */ + if (dev->bus->number == orion5x_pcie_local_bus_nr()) + return IRQ_ORION5X_PCIE0_INT; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN); + case 1: + return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci qnap_ts209_pci __initdata = { + .nr_controllers = 2, + .preinit = qnap_ts209_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = qnap_ts209_pci_map_irq, +}; + +static int __init qnap_ts209_pci_init(void) +{ + if (machine_is_ts_x09()) + pci_common_init(&qnap_ts209_pci); + + return 0; +} + +subsys_initcall(qnap_ts209_pci_init); + +/***************************************************************************** + * Ethernet + ****************************************************************************/ + +static struct mv643xx_eth_platform_data qnap_ts209_eth_data = { + .phy_addr = 8, + .force_phy_addr = 1, +}; + +/***************************************************************************** + * RTC S35390A on I2C bus + ****************************************************************************/ + +#define TS209_RTC_GPIO 3 + +static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { + .driver_name = "rtc-s35390a", + .addr = 0x30, + .irq = 0, +}; + +/**************************************************************************** + * GPIO Attached Keys + * Power button is attached to the PIC microcontroller + ****************************************************************************/ + +#define QNAP_TS209_GPIO_KEY_MEDIA 1 +#define QNAP_TS209_GPIO_KEY_RESET 2 + +static struct gpio_keys_button qnap_ts209_buttons[] = { + { + .code = KEY_RESTART, + .gpio = QNAP_TS209_GPIO_KEY_MEDIA, + .desc = "USB Copy Button", + .active_low = 1, + }, + { + .code = KEY_POWER, + .gpio = QNAP_TS209_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + } +}; + +static struct gpio_keys_platform_data qnap_ts209_button_data = { + .buttons = qnap_ts209_buttons, + .nbuttons = ARRAY_SIZE(qnap_ts209_buttons), +}; + +static struct platform_device qnap_ts209_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { .platform_data = &qnap_ts209_button_data, }, +}; + +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data qnap_ts209_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + + * General Setup + ****************************************************************************/ + +static struct platform_device *qnap_ts209_devices[] __initdata = { + &qnap_ts209_nor_flash, + &qnap_ts209_button_device, +}; + +/* + * QNAP TS-[12]09 specific power off method via UART1-attached PIC + */ + +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) + +static void qnap_ts209_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200)); + + pr_info("%s: triggering power-off...\n", __func__); + + /* hijack uart1 and reset into sane state (19200,8n1) */ + orion5x_write(UART1_REG(LCR), 0x83); + orion5x_write(UART1_REG(DLL), divisor & 0xff); + orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff); + orion5x_write(UART1_REG(LCR), 0x03); + orion5x_write(UART1_REG(IER), 0x00); + orion5x_write(UART1_REG(FCR), 0x00); + orion5x_write(UART1_REG(MCR), 0x00); + + /* send the power-off command 'A' to PIC */ + orion5x_write(UART1_REG(TX), 'A'); +} + +static void __init qnap_ts209_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + /* + * Setup flash mapping + */ + orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); + + /* + * Open a special address decode windows for the PCIE WA. + */ + orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, + ORION5X_PCIE_WA_SIZE); + + /* + * Setup Multiplexing Pins -- + * MPP[0] Reserved + * MPP[1] USB copy button (0 active) + * MPP[2] Load defaults button (0 active) + * MPP[3] GPIO RTC + * MPP[4-5] Reserved + * MPP[6] PCI Int A + * MPP[7] PCI Int B + * MPP[8-11] Reserved + * MPP[12] SATA 0 presence + * MPP[13] SATA 1 presence + * MPP[14] SATA 0 active + * MPP[15] SATA 1 active + * MPP[16] UART1 RXD + * MPP[17] UART1 TXD + * MPP[18] SW_RST (0 active) + * MPP[19] Reserved + * MPP[20] PCI clock 0 + * MPP[21] PCI clock 1 + * MPP[22] USB 0 over current + * MPP[23-25] Reserved + */ + orion5x_write(MPP_0_7_CTRL, 0x3); + orion5x_write(MPP_8_15_CTRL, 0x55550000); + orion5x_write(MPP_16_19_CTRL, 0x5500); + orion5x_gpio_set_valid_pins(0x3cc0fff); + + /* register ts209 specific power-off method */ + pm_power_off = qnap_ts209_power_off; + + platform_add_devices(qnap_ts209_devices, + ARRAY_SIZE(qnap_ts209_devices)); + + /* Get RTC IRQ and register the chip */ + if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { + if (gpio_direction_input(TS209_RTC_GPIO) == 0) + qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO); + else + gpio_free(TS209_RTC_GPIO); + } + if (qnap_ts209_i2c_rtc.irq == 0) + pr_warning("qnap_ts209_init: failed to get RTC IRQ\n"); + i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); + + orion5x_eth_init(&qnap_ts209_eth_data); + orion5x_sata_init(&qnap_ts209_sata_data); +} + +MACHINE_START(TS209, "QNAP TS-109/TS-209") + /* Maintainer: Byron Bradley */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = qnap_ts209_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 76348f060f2..64d09244df4 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -345,7 +345,7 @@ config CPU_XSC3 # Feroceon config CPU_FEROCEON bool - depends on ARCH_ORION + depends on ARCH_ORION5X default y select CPU_32v5 select CPU_ABRT_EV5T diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion/debug-macro.S deleted file mode 100644 index c847f8c9250..00000000000 --- a/include/asm-arm/arch-orion/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-orion/debug-macro.S - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION_REGS_PHYS_BASE - ldrne \rx, =ORION_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-orion/dma.h b/include/asm-arm/arch-orion/dma.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/include/asm-arm/arch-orion/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion/entry-macro.S deleted file mode 100644 index cda096b2acf..00000000000 --- a/include/asm-arm/arch-orion/entry-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-arm/arch-orion/entry-macro.S - * - * Low-level IRQ helper macros for Orion platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =MAIN_IRQ_CAUSE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0] @ main cause - ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask - mov \irqnr, #0 @ default irqnr - @ find cause bits that are unmasked - ands \irqstat, \irqstat, \tmp @ clear Z flag if any - clzne \irqnr, \irqstat @ calc irqnr - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/include/asm-arm/arch-orion/gpio.h b/include/asm-arm/arch-orion/gpio.h deleted file mode 100644 index d66284f9a14..00000000000 --- a/include/asm-arm/arch-orion/gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-orion/gpio.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -extern int gpio_request(unsigned pin, const char *label); -extern void gpio_free(unsigned pin); -extern int gpio_direction_input(unsigned pin); -extern int gpio_direction_output(unsigned pin, int value); -extern int gpio_get_value(unsigned pin); -extern void gpio_set_value(unsigned pin, int value); -extern void orion_gpio_set_blink(unsigned pin, int blink); -extern void gpio_display(void); /* debug */ - -static inline int gpio_to_irq(int pin) -{ - return pin + IRQ_ORION_GPIO_START; -} - -static inline int irq_to_gpio(int irq) -{ - return irq - IRQ_ORION_GPIO_START; -} - -#include /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion/hardware.h deleted file mode 100644 index 998af6029c7..00000000000 --- a/include/asm-arm/arch-orion/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-orion/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "orion.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE ORION_PCIE_MEM_PHYS_BASE - - -#endif diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h deleted file mode 100644 index 23820153b61..00000000000 --- a/include/asm-arm/arch-orion/io.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * include/asm-arm/arch-orion/io.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "orion.h" - -#define IO_SPACE_LIMIT 0xffffffff -#define IO_SPACE_REMAP ORION_PCI_SYS_IO_BASE - -static inline void __iomem * -__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -{ - void __iomem *retval; - - if (mtype == MT_DEVICE && size && paddr >= ORION_REGS_PHYS_BASE && - paddr + size <= ORION_REGS_PHYS_BASE + ORION_REGS_SIZE) { - retval = (void __iomem *)ORION_REGS_VIRT_BASE + - (paddr - ORION_REGS_PHYS_BASE); - } else { - retval = __arm_ioremap(paddr, size, mtype); - } - - return retval; -} - -static inline void -__arch_iounmap(void __iomem *addr) -{ - if (addr < (void __iomem *)ORION_REGS_VIRT_BASE || - addr >= (void __iomem *)(ORION_REGS_VIRT_BASE + ORION_REGS_SIZE)) - __iounmap(addr); -} - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) -#define __arch_iounmap(a) __arch_iounmap(a) -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -/***************************************************************************** - * Helpers to access Orion registers - ****************************************************************************/ -#define orion_read(r) __raw_readl(r) -#define orion_write(r, val) __raw_writel(val, r) - -/* - * These are not preempt-safe. Locks, if needed, must be taken - * care of by the caller. - */ -#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask)) -#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask)) - - -#endif diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h deleted file mode 100644 index 70a2420456a..00000000000 --- a/include/asm-arm/arch-orion/irqs.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-orion/irqs.h - * - * IRQ definitions for Orion SoC - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "orion.h" /* need GPIO_MAX */ - -/* - * Orion Main Interrupt Controller - */ -#define IRQ_ORION_BRIDGE 0 -#define IRQ_ORION_DOORBELL_H2C 1 -#define IRQ_ORION_DOORBELL_C2H 2 -#define IRQ_ORION_UART0 3 -#define IRQ_ORION_UART1 4 -#define IRQ_ORION_I2C 5 -#define IRQ_ORION_GPIO_0_7 6 -#define IRQ_ORION_GPIO_8_15 7 -#define IRQ_ORION_GPIO_16_23 8 -#define IRQ_ORION_GPIO_24_31 9 -#define IRQ_ORION_PCIE0_ERR 10 -#define IRQ_ORION_PCIE0_INT 11 -#define IRQ_ORION_USB1_CTRL 12 -#define IRQ_ORION_DEV_BUS_ERR 14 -#define IRQ_ORION_PCI_ERR 15 -#define IRQ_ORION_USB_BR_ERR 16 -#define IRQ_ORION_USB0_CTRL 17 -#define IRQ_ORION_ETH_RX 18 -#define IRQ_ORION_ETH_TX 19 -#define IRQ_ORION_ETH_MISC 20 -#define IRQ_ORION_ETH_SUM 21 -#define IRQ_ORION_ETH_ERR 22 -#define IRQ_ORION_IDMA_ERR 23 -#define IRQ_ORION_IDMA_0 24 -#define IRQ_ORION_IDMA_1 25 -#define IRQ_ORION_IDMA_2 26 -#define IRQ_ORION_IDMA_3 27 -#define IRQ_ORION_CESA 28 -#define IRQ_ORION_SATA 29 -#define IRQ_ORION_XOR0 30 -#define IRQ_ORION_XOR1 31 - -/* - * Orion General Purpose Pins - */ -#define IRQ_ORION_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_ORION_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion/memory.h deleted file mode 100644 index d9300d62a53..00000000000 --- a/include/asm-arm/arch-orion/memory.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-orion/memory.h - * - * Marvell Orion memory definitions - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h deleted file mode 100644 index 01f1299472d..00000000000 --- a/include/asm-arm/arch-orion/orion.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * include/asm-arm/arch-orion/orion.h - * - * Generic definitions of Orion SoC flavors: - * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_ORION_H -#define __ASM_ARCH_ORION_H - -/***************************************************************************** - * Orion Address Maps - * - * phys - * e0000000 PCIe MEM space - * e8000000 PCI MEM space - * f0000000 PCIe WA space (Orion-1/Orion-NAS only) - * f1000000 on-chip peripheral registers - * f2000000 PCIe I/O space - * f2100000 PCI I/O space - * f4000000 device bus mappings (boot) - * fa000000 device bus mappings (cs0) - * fa800000 device bus mappings (cs2) - * fc000000 device bus mappings (cs0/cs1) - * - * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) - ****************************************************************************/ -#define ORION_REGS_PHYS_BASE 0xf1000000 -#define ORION_REGS_VIRT_BASE 0xfdd00000 -#define ORION_REGS_SIZE SZ_1M - -#define ORION_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION_PCIE_IO_VIRT_BASE 0xfde00000 -#define ORION_PCIE_IO_BUS_BASE 0x00000000 -#define ORION_PCIE_IO_SIZE SZ_1M - -#define ORION_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION_PCI_IO_BUS_BASE 0x00100000 -#define ORION_PCI_IO_SIZE SZ_1M - -/* Relevant only for Orion-1/Orion-NAS */ -#define ORION_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION_PCIE_WA_VIRT_BASE 0xfe000000 -#define ORION_PCIE_WA_SIZE SZ_16M - -#define ORION_PCIE_MEM_PHYS_BASE 0xe0000000 -#define ORION_PCIE_MEM_SIZE SZ_128M - -#define ORION_PCI_MEM_PHYS_BASE 0xe8000000 -#define ORION_PCI_MEM_SIZE SZ_128M - -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 - -/******************************************************************************* - * Orion Registers Map - ******************************************************************************/ -#define ORION_DDR_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x00000) -#define ORION_DDR_REG(x) (ORION_DDR_VIRT_BASE | (x)) - -#define ORION_DEV_BUS_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x10000) -#define ORION_DEV_BUS_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x10000) -#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_VIRT_BASE | (x)) -#define I2C_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2100) - -#define ORION_BRIDGE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x20000) -#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION_BRIDGE_VIRT_BASE | 0x300) - -#define ORION_PCI_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x30000) -#define ORION_PCI_REG(x) (ORION_PCI_VIRT_BASE | (x)) - -#define ORION_PCIE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x40000) -#define ORION_PCIE_REG(x) (ORION_PCIE_VIRT_BASE | (x)) - -#define ORION_USB0_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x50000) -#define ORION_USB0_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x50000) -#define ORION_USB0_REG(x) (ORION_USB0_VIRT_BASE | (x)) - -#define ORION_ETH_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x70000) -#define ORION_ETH_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x70000) -#define ORION_ETH_REG(x) (ORION_ETH_VIRT_BASE | (x)) - -#define ORION_SATA_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x80000) -#define ORION_SATA_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x80000) -#define ORION_SATA_REG(x) (ORION_SATA_VIRT_BASE | (x)) - -#define ORION_USB1_PHYS_BASE (ORION_REGS_PHYS_BASE | 0xa0000) -#define ORION_USB1_VIRT_BASE (ORION_REGS_VIRT_BASE | 0xa0000) -#define ORION_USB1_REG(x) (ORION_USB1_VIRT_BASE | (x)) - -/******************************************************************************* - * Device Bus Registers - ******************************************************************************/ -#define MPP_0_7_CTRL ORION_DEV_BUS_REG(0x000) -#define MPP_8_15_CTRL ORION_DEV_BUS_REG(0x004) -#define MPP_16_19_CTRL ORION_DEV_BUS_REG(0x050) -#define MPP_DEV_CTRL ORION_DEV_BUS_REG(0x008) -#define MPP_RESET_SAMPLE ORION_DEV_BUS_REG(0x010) -#define GPIO_OUT ORION_DEV_BUS_REG(0x100) -#define GPIO_IO_CONF ORION_DEV_BUS_REG(0x104) -#define GPIO_BLINK_EN ORION_DEV_BUS_REG(0x108) -#define GPIO_IN_POL ORION_DEV_BUS_REG(0x10c) -#define GPIO_DATA_IN ORION_DEV_BUS_REG(0x110) -#define GPIO_EDGE_CAUSE ORION_DEV_BUS_REG(0x114) -#define GPIO_EDGE_MASK ORION_DEV_BUS_REG(0x118) -#define GPIO_LEVEL_MASK ORION_DEV_BUS_REG(0x11c) -#define DEV_BANK_0_PARAM ORION_DEV_BUS_REG(0x45c) -#define DEV_BANK_1_PARAM ORION_DEV_BUS_REG(0x460) -#define DEV_BANK_2_PARAM ORION_DEV_BUS_REG(0x464) -#define DEV_BANK_BOOT_PARAM ORION_DEV_BUS_REG(0x46c) -#define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0) -#define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0) -#define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4) -#define GPIO_MAX 32 - -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION_BRIDGE_REG(0x100) -#define CPU_CTRL ORION_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION_BRIDGE_REG(0x108) -#define CPU_SOFT_RESET ORION_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION_BRIDGE_REG(0x110) -#define BRIDGE_MASK ORION_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204) - - -#endif diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion/system.h deleted file mode 100644 index 653f992bbe6..00000000000 --- a/include/asm-arm/arch-orion/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-orion/system.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable and issue soft reset - */ - orion_setbits(CPU_RESET_MASK, (1 << 2)); - orion_setbits(CPU_SOFT_RESET, 1); -} - - -#endif diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h deleted file mode 100644 index 85588d9c22e..00000000000 --- a/include/asm-arm/arch-orion/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-arm/arch-orion/timex.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define ORION_TCLK 166666667 diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion/uncompress.h deleted file mode 100644 index 03306cdd51b..00000000000 --- a/include/asm-arm/arch-orion/uncompress.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-arm/arch-orion/uncompress.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - -#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) -#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) - -#define LSR_THRE 0x20 - -static void putc(const char c) -{ - int j = 0x1000; - while (--j && !(*MV_UART_LSR & LSR_THRE)) - barrier(); - *MV_UART_THR = c; -} - -static void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion/vmalloc.h deleted file mode 100644 index 9d580278d2b..00000000000 --- a/include/asm-arm/arch-orion/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-orion/vmalloc.h - */ - -#define VMALLOC_END 0xfd800000 diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S new file mode 100644 index 00000000000..4f98f3ba292 --- /dev/null +++ b/include/asm-arm/arch-orion5x/debug-macro.S @@ -0,0 +1,22 @@ +/* + * include/asm-arm/arch-orion5x/debug-macro.S + * + * Debugging macro include header + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =ORION5X_REGS_PHYS_BASE + ldrne \rx, =ORION5X_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-orion5x/dma.h b/include/asm-arm/arch-orion5x/dma.h new file mode 100644 index 00000000000..40a8c178f10 --- /dev/null +++ b/include/asm-arm/arch-orion5x/dma.h @@ -0,0 +1 @@ +/* empty */ diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S new file mode 100644 index 00000000000..d8ef54c0ee9 --- /dev/null +++ b/include/asm-arm/arch-orion5x/entry-macro.S @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-orion5x/entry-macro.S + * + * Low-level IRQ helper macros for Orion platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =MAIN_IRQ_CAUSE + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, [\base, #0] @ main cause + ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask + mov \irqnr, #0 @ default irqnr + @ find cause bits that are unmasked + ands \irqstat, \irqstat, \tmp @ clear Z flag if any + clzne \irqnr, \irqstat @ calc irqnr + rsbne \irqnr, \irqnr, #31 + .endm diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h new file mode 100644 index 00000000000..c85e498388b --- /dev/null +++ b/include/asm-arm/arch-orion5x/gpio.h @@ -0,0 +1,28 @@ +/* + * include/asm-arm/arch-orion5x/gpio.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +extern int gpio_request(unsigned pin, const char *label); +extern void gpio_free(unsigned pin); +extern int gpio_direction_input(unsigned pin); +extern int gpio_direction_output(unsigned pin, int value); +extern int gpio_get_value(unsigned pin); +extern void gpio_set_value(unsigned pin, int value); +extern void orion5x_gpio_set_blink(unsigned pin, int blink); +extern void gpio_display(void); /* debug */ + +static inline int gpio_to_irq(int pin) +{ + return pin + IRQ_ORION5X_GPIO_START; +} + +static inline int irq_to_gpio(int irq) +{ + return irq - IRQ_ORION5X_GPIO_START; +} + +#include /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h new file mode 100644 index 00000000000..5d2d8e0b563 --- /dev/null +++ b/include/asm-arm/arch-orion5x/hardware.h @@ -0,0 +1,21 @@ +/* + * include/asm-arm/arch-orion5x/hardware.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include "orion5x.h" + +#define pcibios_assign_all_busses() 1 + +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE + + +#endif diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h new file mode 100644 index 00000000000..5148ab7ad1f --- /dev/null +++ b/include/asm-arm/arch-orion5x/io.h @@ -0,0 +1,68 @@ +/* + * include/asm-arm/arch-orion5x/io.h + * + * Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "orion5x.h" + +#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_REMAP ORION5X_PCI_SYS_IO_BASE + +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + + if (mtype == MT_DEVICE && size && paddr >= ORION5X_REGS_PHYS_BASE && + paddr + size <= ORION5X_REGS_PHYS_BASE + ORION5X_REGS_SIZE) { + retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + + (paddr - ORION5X_REGS_PHYS_BASE); + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE || + addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE)) + __iounmap(addr); +} + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +/***************************************************************************** + * Helpers to access Orion registers + ****************************************************************************/ +#define orion5x_read(r) __raw_readl(r) +#define orion5x_write(r, val) __raw_writel(val, r) + +/* + * These are not preempt-safe. Locks, if needed, must be taken + * care of by the caller. + */ +#define orion5x_setbits(r, mask) orion5x_write((r), orion5x_read(r) | (mask)) +#define orion5x_clrbits(r, mask) orion5x_write((r), orion5x_read(r) & ~(mask)) + + +#endif diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h new file mode 100644 index 00000000000..abdd61a4833 --- /dev/null +++ b/include/asm-arm/arch-orion5x/irqs.h @@ -0,0 +1,62 @@ +/* + * include/asm-arm/arch-orion5x/irqs.h + * + * IRQ definitions for Orion SoC + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "orion5x.h" /* need GPIO_MAX */ + +/* + * Orion Main Interrupt Controller + */ +#define IRQ_ORION5X_BRIDGE 0 +#define IRQ_ORION5X_DOORBELL_H2C 1 +#define IRQ_ORION5X_DOORBELL_C2H 2 +#define IRQ_ORION5X_UART0 3 +#define IRQ_ORION5X_UART1 4 +#define IRQ_ORION5X_I2C 5 +#define IRQ_ORION5X_GPIO_0_7 6 +#define IRQ_ORION5X_GPIO_8_15 7 +#define IRQ_ORION5X_GPIO_16_23 8 +#define IRQ_ORION5X_GPIO_24_31 9 +#define IRQ_ORION5X_PCIE0_ERR 10 +#define IRQ_ORION5X_PCIE0_INT 11 +#define IRQ_ORION5X_USB1_CTRL 12 +#define IRQ_ORION5X_DEV_BUS_ERR 14 +#define IRQ_ORION5X_PCI_ERR 15 +#define IRQ_ORION5X_USB_BR_ERR 16 +#define IRQ_ORION5X_USB0_CTRL 17 +#define IRQ_ORION5X_ETH_RX 18 +#define IRQ_ORION5X_ETH_TX 19 +#define IRQ_ORION5X_ETH_MISC 20 +#define IRQ_ORION5X_ETH_SUM 21 +#define IRQ_ORION5X_ETH_ERR 22 +#define IRQ_ORION5X_IDMA_ERR 23 +#define IRQ_ORION5X_IDMA_0 24 +#define IRQ_ORION5X_IDMA_1 25 +#define IRQ_ORION5X_IDMA_2 26 +#define IRQ_ORION5X_IDMA_3 27 +#define IRQ_ORION5X_CESA 28 +#define IRQ_ORION5X_SATA 29 +#define IRQ_ORION5X_XOR0 30 +#define IRQ_ORION5X_XOR1 31 + +/* + * Orion General Purpose Pins + */ +#define IRQ_ORION5X_GPIO_START 32 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h new file mode 100644 index 00000000000..80053a7afc7 --- /dev/null +++ b/include/asm-arm/arch-orion5x/memory.h @@ -0,0 +1,16 @@ +/* + * include/asm-arm/arch-orion5x/memory.h + * + * Marvell Orion memory definitions + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + + +#endif diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h new file mode 100644 index 00000000000..206ddd71e19 --- /dev/null +++ b/include/asm-arm/arch-orion5x/orion5x.h @@ -0,0 +1,159 @@ +/* + * include/asm-arm/arch-orion5x/orion5x.h + * + * Generic definitions of Orion SoC flavors: + * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. + * + * Maintainer: Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_ORION5X_H +#define __ASM_ARCH_ORION5X_H + +/***************************************************************************** + * Orion Address Maps + * + * phys + * e0000000 PCIe MEM space + * e8000000 PCI MEM space + * f0000000 PCIe WA space (Orion-1/Orion-NAS only) + * f1000000 on-chip peripheral registers + * f2000000 PCIe I/O space + * f2100000 PCI I/O space + * f4000000 device bus mappings (boot) + * fa000000 device bus mappings (cs0) + * fa800000 device bus mappings (cs2) + * fc000000 device bus mappings (cs0/cs1) + * + * virt phys size + * fdd00000 f1000000 1M on-chip peripheral registers + * fde00000 f2000000 1M PCIe I/O space + * fdf00000 f2100000 1M PCI I/O space + * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) + ****************************************************************************/ +#define ORION5X_REGS_PHYS_BASE 0xf1000000 +#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_SIZE SZ_1M + +#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 +#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 +#define ORION5X_PCIE_IO_BUS_BASE 0x00000000 +#define ORION5X_PCIE_IO_SIZE SZ_1M + +#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 +#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 +#define ORION5X_PCI_IO_BUS_BASE 0x00100000 +#define ORION5X_PCI_IO_SIZE SZ_1M + +/* Relevant only for Orion-1/Orion-NAS */ +#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 +#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_SIZE SZ_16M + +#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 +#define ORION5X_PCIE_MEM_SIZE SZ_128M + +#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 +#define ORION5X_PCI_MEM_SIZE SZ_128M + +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 + +/******************************************************************************* + * Orion Registers Map + ******************************************************************************/ +#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) + +#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) +#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) +#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) +#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) + +#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) + +#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) +#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) + +#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) +#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) +#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) + +#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) +#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) +#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) + +#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) +#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) + +#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) +#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) +#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) + +/******************************************************************************* + * Device Bus Registers + ******************************************************************************/ +#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000) +#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004) +#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050) +#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008) +#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010) +#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100) +#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104) +#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108) +#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c) +#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110) +#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114) +#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118) +#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c) +#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c) +#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460) +#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464) +#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c) +#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0) +#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) +#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) +#define GPIO_MAX 32 + +/*************************************************************************** + * Orion CPU Bridge Registers + **************************************************************************/ +#define CPU_CONF ORION5X_BRIDGE_REG(0x100) +#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) +#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) +#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) +#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) +#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) +#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) +#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) + + +#endif diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h new file mode 100644 index 00000000000..3f1d1e2d38f --- /dev/null +++ b/include/asm-arm/arch-orion5x/system.h @@ -0,0 +1,32 @@ +/* + * include/asm-arm/arch-orion5x/system.h + * + * Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + /* + * Enable and issue soft reset + */ + orion5x_setbits(CPU_RESET_MASK, (1 << 2)); + orion5x_setbits(CPU_SOFT_RESET, 1); +} + + +#endif diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h new file mode 100644 index 00000000000..31c568e28cc --- /dev/null +++ b/include/asm-arm/arch-orion5x/timex.h @@ -0,0 +1,13 @@ +/* + * include/asm-arm/arch-orion5x/timex.h + * + * Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) + +#define ORION5X_TCLK 166666667 diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h new file mode 100644 index 00000000000..5c13d4fafb4 --- /dev/null +++ b/include/asm-arm/arch-orion5x/uncompress.h @@ -0,0 +1,34 @@ +/* + * include/asm-arm/arch-orion5x/uncompress.h + * + * Tzachi Perelstein + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + +#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) +#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) + +#define LSR_THRE 0x20 + +static void putc(const char c) +{ + int j = 0x1000; + while (--j && !(*MV_UART_LSR & LSR_THRE)) + barrier(); + *MV_UART_THR = c; +} + +static void flush(void) +{ +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h new file mode 100644 index 00000000000..2b3061e90dc --- /dev/null +++ b/include/asm-arm/arch-orion5x/vmalloc.h @@ -0,0 +1,5 @@ +/* + * include/asm-arm/arch-orion5x/vmalloc.h + */ + +#define VMALLOC_END 0xfd800000 -- cgit v1.2.3-70-g09d2 From ab65b87093a38ad8565780494c74bd7afd79ad9a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 16 Oct 2007 08:03:00 +0200 Subject: ns9xxx: Use get_irqnr_preamble to initialize base register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch optimizes the irq handling a bit. Now the base register is only computed once if more than one irq is pending. Signed-off-by: Uwe Kleine-König --- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 86aec87303e..5c706dd2379 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -12,13 +12,13 @@ #include .macro get_irqnr_preamble, base, tmp + ldr \base, =SYS_ISRADDR .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =SYS_ISRADDR ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] cmp \irqstat, #0 ldrne \irqnr, [\base] -- cgit v1.2.3-70-g09d2 From a9fc01f919521886436f6cdcc2c0c302d4afae15 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 16 Oct 2007 16:56:05 +0200 Subject: ns9xxx: add module_is_..., processor_is_... and board_is_... for many machs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Most of the machines are not yet supported, but I have to start somewhere. Signed-off-by: Uwe Kleine-König --- include/asm-arm/arch-ns9xxx/board.h | 28 +++++++++++++-- include/asm-arm/arch-ns9xxx/module.h | 60 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-ns9xxx/processor.h | 31 ++++++++++++++--- 3 files changed, 112 insertions(+), 7 deletions(-) create mode 100644 include/asm-arm/arch-ns9xxx/module.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h index 716f34fdb71..e57443bdbbd 100644 --- a/include/asm-arm/arch-ns9xxx/board.h +++ b/include/asm-arm/arch-ns9xxx/board.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/board.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -13,8 +13,30 @@ #include -#define board_is_a9m9750dev() (machine_is_cc9p9360dev()) +#define board_is_a9m9750dev() (0 \ + || machine_is_cc9p9360dev() \ + || machine_is_cc9p9750dev() \ + ) -#define board_is_jscc9p9360() (machine_is_cc9p9360js()) +#define board_is_a9mvali() (0 \ + || machine_is_cc9p9360val() \ + || machine_is_cc9p9750val() \ + ) + +#define board_is_jscc9p9210() (0 \ + || machine_is_cc9p9210js() \ + ) + +#define board_is_jscc9p9215() (0 \ + || machine_is_cc9p9215js() \ + ) + +#define board_is_jscc9p9360() (0 \ + || machine_is_cc9p9360js() \ + ) + +#define board_is_uncbas() (0 \ + || machine_is_cc7ucamry() \ + ) #endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h new file mode 100644 index 00000000000..ac08a31111e --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/module.h @@ -0,0 +1,60 @@ +/* + * include/asm-arm/arch-ns9xxx/module.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_MODULE_H +#define __ASM_ARCH_MODULE_H + +#include + +#define module_is_cc7ucamry() (0 \ + || machine_is_cc7ucamry() \ + ) + +#define module_is_cc9c() (0 \ + || machine_is_cc9c() \ + ) + +#define module_is_cc9p9210() (0 \ + || machine_is_cc9p9210() \ + || machine_is_cc9p9210js() \ + ) + +#define module_is_cc9p9215() (0 \ + || machine_is_cc9p9215() \ + || machine_is_cc9p9215js() \ + ) + +#define module_is_cc9p9360() (0 \ + || machine_is_a9m9360() \ + || machine_is_cc9p9360dev() \ + || machine_is_cc9p9360js() \ + || machine_is_cc9p9360val() \ + ) + +#define module_is_cc9p9750() (0 \ + || machine_is_a9m9750() \ + || machine_is_cc9p9750dev() \ + || machine_is_cc9p9750js() \ + || machine_is_cc9p9750val() \ + ) + +#define module_is_ccw9c() (0 \ + || machine_is_ccw9c() \ + ) + +#define module_is_inc20otter() (0 \ + || machine_is_inc20otter() \ + ) + +#define module_is_otter() (0 \ + || machine_is_otter() \ + ) + +#endif /* ifndef __ASM_ARCH_MODULE_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index 223e51b8e10..f7b53b65de8 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/processor.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,9 +11,32 @@ #ifndef __ASM_ARCH_PROCESSOR_H #define __ASM_ARCH_PROCESSOR_H -#include +#include -#define processor_is_ns9360() (machine_is_cc9p9360dev() \ - || machine_is_cc9p9360js()) +#define processor_is_ns9210() (0 \ + || module_is_cc7ucamry() \ + || module_is_cc9p9210() \ + || module_is_inc20otter() \ + || module_is_otter() \ + ) + +#define processor_is_ns9215() (0 \ + || module_is_cc9p9215() \ + ) + +#define processor_is_ns9360() (0 \ + || module_is_cc9p9360() \ + || module_is_cc9c() \ + || module_is_ccw9c() \ + ) + +#define processor_is_ns9750() (0 \ + || module_is_cc9p9750() \ + ) + +#define processor_is_ns921x() (0 \ + || processor_is_ns9210() \ + || processor_is_ns9215() \ + ) #endif /* ifndef __ASM_ARCH_PROCESSOR_H */ -- cgit v1.2.3-70-g09d2 From 724ce5ee15ff4c4f3035110b683b990a3b33c832 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 15 Feb 2008 08:41:06 +0100 Subject: ns9xxx: prepare for adding support for Digi ns921x processors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hardware team changed some things that were taken as being common to all ns9xxx processors up to now. This patch addresses: - irqs: s/IRQ_/IRQ_NS9360_/ - system module registers: some registers are still general, their definition lives now in include/asm-arm/arch-ns9xxx/regs-sys-common.h. The ns9360 specific ones are in .../regs-sys-ns9360.h As a result ns9360_systemclock cannot be static inline any more as its definition needs regs-sys-ns9360.h. This becomes a real problem when adding support for ns9215 as this will need regs-sys-ns9215.h and including both files will not work. For the same reason ns9360_reset() is now non-inline and gpio functions live in their own file. - register mapping: s/ns9xxx_map_io/ns9360_map_io/ - timer registers: move time.c to time-ns9360.c; s/ns9xxx_timer/ns9360_timer/ Signed-off-by: Uwe Kleine-König --- arch/arm/mach-ns9xxx/Makefile | 4 +- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 11 +- arch/arm/mach-ns9xxx/generic.c | 27 +--- arch/arm/mach-ns9xxx/generic.h | 5 +- arch/arm/mach-ns9xxx/gpio-ns9360.c | 118 ++++++++++++++++ arch/arm/mach-ns9xxx/gpio-ns9360.h | 13 ++ arch/arm/mach-ns9xxx/gpio.c | 141 +++++++------------ arch/arm/mach-ns9xxx/irq.c | 4 +- arch/arm/mach-ns9xxx/mach-cc9p9360dev.c | 8 +- arch/arm/mach-ns9xxx/mach-cc9p9360js.c | 8 +- arch/arm/mach-ns9xxx/processor-ns9360.c | 54 ++++++++ arch/arm/mach-ns9xxx/time-ns9360.c | 185 +++++++++++++++++++++++++ arch/arm/mach-ns9xxx/time.c | 184 ------------------------ include/asm-arm/arch-ns9xxx/clock.h | 71 ---------- include/asm-arm/arch-ns9xxx/entry-macro.S | 4 +- include/asm-arm/arch-ns9xxx/irqs.h | 67 ++++----- include/asm-arm/arch-ns9xxx/processor-ns9360.h | 32 +++++ include/asm-arm/arch-ns9xxx/regs-sys-common.h | 31 +++++ include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h | 148 ++++++++++++++++++++ include/asm-arm/arch-ns9xxx/regs-sys.h | 163 ---------------------- include/asm-arm/arch-ns9xxx/system.h | 17 +-- 21 files changed, 697 insertions(+), 598 deletions(-) create mode 100644 arch/arm/mach-ns9xxx/gpio-ns9360.c create mode 100644 arch/arm/mach-ns9xxx/gpio-ns9360.h create mode 100644 arch/arm/mach-ns9xxx/processor-ns9360.c create mode 100644 arch/arm/mach-ns9xxx/time-ns9360.c delete mode 100644 arch/arm/mach-ns9xxx/time.c delete mode 100644 include/asm-arm/arch-ns9xxx/clock.h create mode 100644 include/asm-arm/arch-ns9xxx/processor-ns9360.h create mode 100644 include/asm-arm/arch-ns9xxx/regs-sys-common.h create mode 100644 include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-sys.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile index ca2c68dede1..67a9e30c878 100644 --- a/arch/arm/mach-ns9xxx/Makefile +++ b/arch/arm/mach-ns9xxx/Makefile @@ -1,8 +1,10 @@ -obj-y := irq.o time.o generic.o gpio.o +obj-y := irq.o generic.o gpio.o obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o +obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o + obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index 14a06da25ac..a494b71c019 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -14,7 +14,8 @@ #include #include -#include +#include +#include #include #include #include @@ -103,9 +104,9 @@ void __init board_a9m9750dev_init_irq(void) int i; if (gpio_request(11, "board a9m9750dev extirq2") == 0) - ns9xxx_gpio_configure(11, 0, 1); + ns9360_gpio_configure(11, 0, 1); else - printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_EXT2\n", + printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n", __func__); for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) { @@ -114,13 +115,13 @@ void __init board_a9m9750dev_init_irq(void) set_irq_flags(i, IRQF_VALID); } - /* IRQ_EXT2: level sensitive + active low */ + /* IRQ_NS9XXX_EXT2: level sensitive + active low */ eic = __raw_readl(SYS_EIC(2)); REGSET(eic, SYS_EIC, PLTY, AL); REGSET(eic, SYS_EIC, LVEDG, LEVEL); __raw_writel(eic, SYS_EIC(2)); - set_irq_chained_handler(IRQ_EXT2, + set_irq_chained_handler(IRQ_NS9XXX_EXT2, a9m9750dev_fpga_demux_handler); } diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c index d742c921e34..1e0f467879c 100644 --- a/arch/arm/mach-ns9xxx/generic.c +++ b/arch/arm/mach-ns9xxx/generic.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/generic.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,34 +11,9 @@ #include #include #include -#include -#include -#include -#include -#include -#include #include "generic.h" -static struct map_desc standard_io_desc[] __initdata = { - { /* BBus */ - .virtual = io_p2v(0x90000000), - .pfn = __phys_to_pfn(0x90000000), - .length = 0x00700000, - .type = MT_DEVICE, - }, { /* AHB */ - .virtual = io_p2v(0xa0100000), - .pfn = __phys_to_pfn(0xa0100000), - .length = 0x00900000, - .type = MT_DEVICE, - }, -}; - -void __init ns9xxx_map_io(void) -{ - iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); -} - void __init ns9xxx_init_machine(void) { } diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h index 687e291773f..82493191aad 100644 --- a/arch/arm/mach-ns9xxx/generic.h +++ b/arch/arm/mach-ns9xxx/generic.h @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/generic.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -13,7 +13,4 @@ #include void __init ns9xxx_init_irq(void); -void __init ns9xxx_map_io(void); void __init ns9xxx_init_machine(void); - -extern struct sys_timer ns9xxx_timer; diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c new file mode 100644 index 00000000000..cabfb879dda --- /dev/null +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c @@ -0,0 +1,118 @@ +/* + * arch/arm/mach-ns9xxx/gpio-ns9360.c + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include + +#include "gpio-ns9360.h" + +static inline int ns9360_valid_gpio(unsigned gpio) +{ + return gpio <= 72; +} + +static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio) +{ + if (gpio < 56) + return BBU_GCONFb1(gpio / 8); + else + /* + * this could be optimised away on + * ns9750 only builds, but it isn't ... + */ + return BBU_GCONFb2((gpio - 56) / 8); +} + +static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio) +{ + if (gpio < 32) + return BBU_GCTRL1; + else if (gpio < 64) + return BBU_GCTRL2; + else + /* this could be optimised away on ns9750 only builds */ + return BBU_GCTRL3; +} + +static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio) +{ + if (gpio < 32) + return BBU_GSTAT1; + else if (gpio < 64) + return BBU_GSTAT2; + else + /* this could be optimised away on ns9750 only builds */ + return BBU_GSTAT3; +} + +/* + * each gpio can serve for 4 different purposes [0..3]. These are called + * "functions" and passed in the parameter func. Functions 0-2 are always some + * special things, function 3 is GPIO. If func == 3 dir specifies input or + * output, and with inv you can enable an inverter (independent of func). + */ +int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func) +{ + void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio); + u32 confval; + + confval = __raw_readl(conf); + REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); + REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); + REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); + __raw_writel(confval, conf); + + return 0; +} + +int ns9360_gpio_configure(unsigned gpio, int inv, int func) +{ + if (likely(ns9360_valid_gpio(gpio))) { + if (func == 3) { + printk(KERN_WARNING "use gpio_direction_input " + "or gpio_direction_output\n"); + return -EINVAL; + } else + return __ns9360_gpio_configure(gpio, 0, inv, func); + } else + return -EINVAL; +} +EXPORT_SYMBOL(ns9360_gpio_configure); + +int ns9360_gpio_get_value(unsigned gpio) +{ + void __iomem *stat = ns9360_gpio_get_gstataddr(gpio); + int ret; + + ret = 1 & (__raw_readl(stat) >> (gpio & 31)); + + return ret; +} + +void ns9360_gpio_set_value(unsigned gpio, int value) +{ + void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio); + u32 ctrlval; + + ctrlval = __raw_readl(ctrl); + + if (value) + ctrlval |= 1 << (gpio & 31); + else + ctrlval &= ~(1 << (gpio & 31)); + + __raw_writel(ctrlval, ctrl); +} diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.h b/arch/arm/mach-ns9xxx/gpio-ns9360.h new file mode 100644 index 00000000000..131cd1715ca --- /dev/null +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.h @@ -0,0 +1,13 @@ +/* + * arch/arm/mach-ns9xxx/gpio-ns9360.h + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func); +int ns9360_gpio_get_value(unsigned gpio); +void ns9360_gpio_set_value(unsigned gpio, int value); diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index 5286e9fc1d3..b3c963b0c8f 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/gpio.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -15,12 +15,13 @@ #include #include -#include -#include +#include #include #include #include +#include "gpio-ns9360.h" + #if defined(CONFIG_PROCESSOR_NS9360) #define GPIO_MAX 72 #elif defined(CONFIG_PROCESSOR_NS9750) @@ -45,41 +46,10 @@ static inline int ns9xxx_valid_gpio(unsigned gpio) return gpio <= 49; else #endif + { BUG(); -} - -static inline void __iomem *ns9xxx_gpio_get_gconfaddr(unsigned gpio) -{ - if (gpio < 56) - return BBU_GCONFb1(gpio / 8); - else - /* - * this could be optimised away on - * ns9750 only builds, but it isn't ... - */ - return BBU_GCONFb2((gpio - 56) / 8); -} - -static inline void __iomem *ns9xxx_gpio_get_gctrladdr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GCTRL1; - else if (gpio < 64) - return BBU_GCTRL2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GCTRL3; -} - -static inline void __iomem *ns9xxx_gpio_get_gstataddr(unsigned gpio) -{ - if (gpio < 32) - return BBU_GSTAT1; - else if (gpio < 64) - return BBU_GSTAT2; - else - /* this could be optimised away on ns9750 only builds */ - return BBU_GSTAT3; + return 0; + } } int gpio_request(unsigned gpio, const char *label) @@ -98,49 +68,24 @@ void gpio_free(unsigned gpio) } EXPORT_SYMBOL(gpio_free); -/* - * each gpio can serve for 4 different purposes [0..3]. These are called - * "functions" and passed in the parameter func. Functions 0-2 are always some - * special things, function 3 is GPIO. If func == 3 dir specifies input or - * output, and with inv you can enable an inverter (independent of func). - */ -static int __ns9xxx_gpio_configure(unsigned gpio, int dir, int inv, int func) +int gpio_direction_input(unsigned gpio) { - void __iomem *conf = ns9xxx_gpio_get_gconfaddr(gpio); - u32 confval; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - confval = __raw_readl(conf); - REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir); - REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv); - REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func); - __raw_writel(confval, conf); + if (likely(ns9xxx_valid_gpio(gpio))) { + int ret = -EINVAL; + unsigned long flags; - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&gpio_lock, flags); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ret = __ns9360_gpio_configure(gpio, 0, 0, 3); + else +#endif + BUG(); - return 0; -} + spin_unlock_irqrestore(&gpio_lock, flags); -int ns9xxx_gpio_configure(unsigned gpio, int inv, int func) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - if (func == 3) { - printk(KERN_WARNING "use gpio_direction_input " - "or gpio_direction_output\n"); - return -EINVAL; - } else - return __ns9xxx_gpio_configure(gpio, 0, inv, func); - } else - return -EINVAL; -} -EXPORT_SYMBOL(ns9xxx_gpio_configure); + return ret; -int gpio_direction_input(unsigned gpio) -{ - if (likely(ns9xxx_valid_gpio(gpio))) { - return __ns9xxx_gpio_configure(gpio, 0, 0, 3); } else return -EINVAL; } @@ -149,9 +94,22 @@ EXPORT_SYMBOL(gpio_direction_input); int gpio_direction_output(unsigned gpio, int value) { if (likely(ns9xxx_valid_gpio(gpio))) { + int ret = -EINVAL; + unsigned long flags; + gpio_set_value(gpio, value); - return __ns9xxx_gpio_configure(gpio, 1, 0, 3); + spin_lock_irqsave(&gpio_lock, flags); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ret = __ns9360_gpio_configure(gpio, 1, 0, 3); + else +#endif + BUG(); + + spin_unlock_irqrestore(&gpio_lock, flags); + + return ret; } else return -EINVAL; } @@ -159,31 +117,28 @@ EXPORT_SYMBOL(gpio_direction_output); int gpio_get_value(unsigned gpio) { - void __iomem *stat = ns9xxx_gpio_get_gstataddr(gpio); - int ret; - - ret = 1 & (__raw_readl(stat) >> (gpio & 31)); - - return ret; +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + return ns9360_gpio_get_value(gpio); + else +#endif + { + BUG(); + return -EINVAL; + } } EXPORT_SYMBOL(gpio_get_value); void gpio_set_value(unsigned gpio, int value) { - void __iomem *ctrl = ns9xxx_gpio_get_gctrladdr(gpio); - u32 ctrlval; unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - - ctrlval = __raw_readl(ctrl); - - if (value) - ctrlval |= 1 << (gpio & 31); +#if defined(CONFIG_PROCESSOR_NS9360) + if (processor_is_ns9360()) + ns9360_gpio_set_value(gpio, value); else - ctrlval &= ~(1 << (gpio & 31)); - - __raw_writel(ctrlval, ctrl); +#endif + BUG(); spin_unlock_irqrestore(&gpio_lock, flags); } diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index 00001b874e9..d4a583cc44c 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include @@ -67,7 +67,7 @@ void __init ns9xxx_init_irq(void) for (i = 0; i < 32; ++i) __raw_writel(i, SYS_IVA(i)); - for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) { + for (i = 0; i <= 31; ++i) { set_irq_chip(i, &ns9xxx_chip); set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID); diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c index 760c9d0db7c..9623fff6b3b 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,12 +11,14 @@ #include #include +#include + #include "board-a9m9750dev.h" #include "generic.h" static void __init mach_cc9p9360dev_map_io(void) { - ns9xxx_map_io(); + ns9360_map_io(); board_a9m9750dev_map_io(); } @@ -36,6 +38,6 @@ MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard") .map_io = mach_cc9p9360dev_map_io, .init_irq = mach_cc9p9360dev_init_irq, .init_machine = mach_cc9p9360dev_init_machine, - .timer = &ns9xxx_timer, + .timer = &ns9360_timer, .boot_params = 0x100, MACHINE_END diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index 85c8b41105c..fcc815bdd29 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ns9xxx/mach-cc9p9360js.c * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,6 +11,8 @@ #include #include +#include + #include "board-jscc9p9360.h" #include "generic.h" @@ -21,9 +23,9 @@ static void __init mach_cc9p9360js_init_machine(void) } MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard") - .map_io = ns9xxx_map_io, + .map_io = ns9360_map_io, .init_irq = ns9xxx_init_irq, .init_machine = mach_cc9p9360js_init_machine, - .timer = &ns9xxx_timer, + .timer = &ns9360_timer, .boot_params = 0x100, MACHINE_END diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c new file mode 100644 index 00000000000..2bee0b7fccb --- /dev/null +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -0,0 +1,54 @@ +/* + * arch/arm/mach-ns9xxx/processor-ns9360.c + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include +#include +#include + +#include +#include +#include +#include + +void ns9360_reset(char mode) +{ + u32 reg; + + reg = __raw_readl(SYS_PLL) >> 16; + REGSET(reg, SYS_PLL, SWC, YES); + __raw_writel(reg, SYS_PLL); +} + +#define CRYSTAL 29491200 /* Hz */ +unsigned long ns9360_systemclock(void) +{ + u32 pll = __raw_readl(SYS_PLL); + return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) + >> REGGETIM(pll, SYS_PLL, FS); +} + +static struct map_desc ns9360_io_desc[] __initdata = { + { /* BBus */ + .virtual = io_p2v(0x90000000), + .pfn = __phys_to_pfn(0x90000000), + .length = 0x00700000, + .type = MT_DEVICE, + }, { /* AHB */ + .virtual = io_p2v(0xa0100000), + .pfn = __phys_to_pfn(0xa0100000), + .length = 0x00900000, + .type = MT_DEVICE, + }, +}; + +void __init ns9360_map_io(void) +{ + iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc)); +} diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c new file mode 100644 index 00000000000..4d573c9793e --- /dev/null +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -0,0 +1,185 @@ +/* + * arch/arm/mach-ns9xxx/time-ns9360.c + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include "generic.h" + +#define TIMER_CLOCKSOURCE 0 +#define TIMER_CLOCKEVENT 1 +static u32 latch; + +static cycle_t ns9360_clocksource_read(void) +{ + return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); +} + +static struct clocksource ns9360_clocksource = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKSOURCE), + .rating = 300, + .read = ns9360_clocksource_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void ns9360_clockevent_setmode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + __raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT)); + REGSET(tc, SYS_TCx, REN, EN); + REGSET(tc, SYS_TCx, INTS, EN); + REGSET(tc, SYS_TCx, TEN, EN); + break; + + case CLOCK_EVT_MODE_ONESHOT: + REGSET(tc, SYS_TCx, REN, DIS); + REGSET(tc, SYS_TCx, INTS, EN); + + /* fall through */ + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + default: + REGSET(tc, SYS_TCx, TEN, DIS); + break; + } + + __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); +} + +static int ns9360_clockevent_setnextevent(unsigned long evt, + struct clock_event_device *clk) +{ + u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); + + if (REGGET(tc, SYS_TCx, TEN)) { + REGSET(tc, SYS_TCx, TEN, DIS); + __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); + } + + REGSET(tc, SYS_TCx, TEN, EN); + + __raw_writel(evt, SYS_TRC(TIMER_CLOCKEVENT)); + + __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); + + return 0; +} + +static struct clock_event_device ns9360_clockevent_device = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), + .shift = 20, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = ns9360_clockevent_setmode, + .set_next_event = ns9360_clockevent_setnextevent, +}; + +static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id) +{ + int timerno = irq - IRQ_NS9360_TIMER0; + u32 tc; + + struct clock_event_device *evt = &ns9360_clockevent_device; + + /* clear irq */ + tc = __raw_readl(SYS_TC(timerno)); + if (REGGET(tc, SYS_TCx, REN) == SYS_TCx_REN_DIS) { + REGSET(tc, SYS_TCx, TEN, DIS); + __raw_writel(tc, SYS_TC(timerno)); + } + REGSET(tc, SYS_TCx, INTC, SET); + __raw_writel(tc, SYS_TC(timerno)); + REGSET(tc, SYS_TCx, INTC, UNSET); + __raw_writel(tc, SYS_TC(timerno)); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction ns9360_clockevent_action = { + .name = "ns9360-timer" __stringify(TIMER_CLOCKEVENT), + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = ns9360_clockevent_handler, +}; + +static void __init ns9360_timer_init(void) +{ + int tc; + + tc = __raw_readl(SYS_TC(TIMER_CLOCKSOURCE)); + if (REGGET(tc, SYS_TCx, TEN)) { + REGSET(tc, SYS_TCx, TEN, DIS); + __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); + } + + __raw_writel(0, SYS_TRC(TIMER_CLOCKSOURCE)); + + REGSET(tc, SYS_TCx, TEN, EN); + REGSET(tc, SYS_TCx, TDBG, STOP); + REGSET(tc, SYS_TCx, TLCS, CPU); + REGSET(tc, SYS_TCx, TM, IEE); + REGSET(tc, SYS_TCx, INTS, DIS); + REGSET(tc, SYS_TCx, UDS, UP); + REGSET(tc, SYS_TCx, TSZ, 32); + REGSET(tc, SYS_TCx, REN, EN); + + __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); + + ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(), + ns9360_clocksource.shift); + + clocksource_register(&ns9360_clocksource); + + latch = SH_DIV(ns9360_cpuclock(), HZ, 0); + + tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); + REGSET(tc, SYS_TCx, TEN, DIS); + REGSET(tc, SYS_TCx, TDBG, STOP); + REGSET(tc, SYS_TCx, TLCS, CPU); + REGSET(tc, SYS_TCx, TM, IEE); + REGSET(tc, SYS_TCx, INTS, DIS); + REGSET(tc, SYS_TCx, UDS, DOWN); + REGSET(tc, SYS_TCx, TSZ, 32); + REGSET(tc, SYS_TCx, REN, EN); + __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); + + ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(), + NSEC_PER_SEC, ns9360_clockevent_device.shift); + ns9360_clockevent_device.max_delta_ns = + clockevent_delta2ns(-1, &ns9360_clockevent_device); + ns9360_clockevent_device.min_delta_ns = + clockevent_delta2ns(1, &ns9360_clockevent_device); + + ns9360_clockevent_device.cpumask = cpumask_of_cpu(0); + clockevents_register_device(&ns9360_clockevent_device); + + setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT, + &ns9360_clockevent_action); +} + +struct sys_timer ns9360_timer = { + .init = ns9360_timer_init, +}; diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c deleted file mode 100644 index c3dd1f4acb9..00000000000 --- a/arch/arm/mach-ns9xxx/time.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * arch/arm/mach-ns9xxx/time.c - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include "generic.h" - -#define TIMER_CLOCKSOURCE 0 -#define TIMER_CLOCKEVENT 1 -static u32 latch; - -static cycle_t ns9xxx_clocksource_read(void) -{ - return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE)); -} - -static struct clocksource ns9xxx_clocksource = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKSOURCE), - .rating = 300, - .read = ns9xxx_clocksource_read, - .mask = CLOCKSOURCE_MASK(32), - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void ns9xxx_clockevent_setmode(enum clock_event_mode mode, - struct clock_event_device *clk) -{ - u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - __raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT)); - REGSET(tc, SYS_TCx, REN, EN); - REGSET(tc, SYS_TCx, INTS, EN); - REGSET(tc, SYS_TCx, TEN, EN); - break; - - case CLOCK_EVT_MODE_ONESHOT: - REGSET(tc, SYS_TCx, REN, DIS); - REGSET(tc, SYS_TCx, INTS, EN); - - /* fall through */ - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - default: - REGSET(tc, SYS_TCx, TEN, DIS); - break; - } - - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); -} - -static int ns9xxx_clockevent_setnextevent(unsigned long evt, - struct clock_event_device *clk) -{ - u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - - if (REGGET(tc, SYS_TCx, TEN)) { - REGSET(tc, SYS_TCx, TEN, DIS); - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - } - - REGSET(tc, SYS_TCx, TEN, EN); - - __raw_writel(evt, SYS_TRC(TIMER_CLOCKEVENT)); - - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - - return 0; -} - -static struct clock_event_device ns9xxx_clockevent_device = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT), - .shift = 20, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = ns9xxx_clockevent_setmode, - .set_next_event = ns9xxx_clockevent_setnextevent, -}; - -static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id) -{ - int timerno = irq - IRQ_TIMER0; - u32 tc; - - struct clock_event_device *evt = &ns9xxx_clockevent_device; - - /* clear irq */ - tc = __raw_readl(SYS_TC(timerno)); - if (REGGET(tc, SYS_TCx, REN) == SYS_TCx_REN_DIS) { - REGSET(tc, SYS_TCx, TEN, DIS); - __raw_writel(tc, SYS_TC(timerno)); - } - REGSET(tc, SYS_TCx, INTC, SET); - __raw_writel(tc, SYS_TC(timerno)); - REGSET(tc, SYS_TCx, INTC, UNSET); - __raw_writel(tc, SYS_TC(timerno)); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction ns9xxx_clockevent_action = { - .name = "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT), - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = ns9xxx_clockevent_handler, -}; - -static void __init ns9xxx_timer_init(void) -{ - int tc; - - tc = __raw_readl(SYS_TC(TIMER_CLOCKSOURCE)); - if (REGGET(tc, SYS_TCx, TEN)) { - REGSET(tc, SYS_TCx, TEN, DIS); - __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - } - - __raw_writel(0, SYS_TRC(TIMER_CLOCKSOURCE)); - - REGSET(tc, SYS_TCx, TEN, EN); - REGSET(tc, SYS_TCx, TDBG, STOP); - REGSET(tc, SYS_TCx, TLCS, CPU); - REGSET(tc, SYS_TCx, TM, IEE); - REGSET(tc, SYS_TCx, INTS, DIS); - REGSET(tc, SYS_TCx, UDS, UP); - REGSET(tc, SYS_TCx, TSZ, 32); - REGSET(tc, SYS_TCx, REN, EN); - - __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - - ns9xxx_clocksource.mult = clocksource_hz2mult(ns9xxx_cpuclock(), - ns9xxx_clocksource.shift); - - clocksource_register(&ns9xxx_clocksource); - - latch = SH_DIV(ns9xxx_cpuclock(), HZ, 0); - - tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT)); - REGSET(tc, SYS_TCx, TEN, DIS); - REGSET(tc, SYS_TCx, TDBG, STOP); - REGSET(tc, SYS_TCx, TLCS, CPU); - REGSET(tc, SYS_TCx, TM, IEE); - REGSET(tc, SYS_TCx, INTS, DIS); - REGSET(tc, SYS_TCx, UDS, DOWN); - REGSET(tc, SYS_TCx, TSZ, 32); - REGSET(tc, SYS_TCx, REN, EN); - __raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT)); - - ns9xxx_clockevent_device.mult = div_sc(ns9xxx_cpuclock(), - NSEC_PER_SEC, ns9xxx_clockevent_device.shift); - ns9xxx_clockevent_device.max_delta_ns = - clockevent_delta2ns(-1, &ns9xxx_clockevent_device); - ns9xxx_clockevent_device.min_delta_ns = - clockevent_delta2ns(1, &ns9xxx_clockevent_device); - - ns9xxx_clockevent_device.cpumask = cpumask_of_cpu(0); - clockevents_register_device(&ns9xxx_clockevent_device); - - setup_irq(IRQ_TIMER0 + TIMER_CLOCKEVENT, &ns9xxx_clockevent_action); -} - -struct sys_timer ns9xxx_timer = { - .init = ns9xxx_timer_init, -}; diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h deleted file mode 100644 index b943d3a92a1..00000000000 --- a/include/asm-arm/arch-ns9xxx/clock.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/clock.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H - -#include - -#define CRYSTAL 29491200 /* Hz */ - -/* The HRM calls this value f_vco */ -static inline u32 ns9xxx_systemclock(void) __attribute__((const)); -static inline u32 ns9xxx_systemclock(void) -{ - u32 pll = __raw_readl(SYS_PLL); - - /* - * The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in - * time.c). - * - * The following values are given: - * - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6} - * - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2 - * - ND in {0 .. 31} - * - FS in {0 .. 3} - * - * Assuming the worst, we consider: - * - TIMERCLOCKSELECT == 64 - * - ND == 0 - * - FS == 3 - * - * So HZ should be a divisor of: - * (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT - * == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64 - * == 2^8 * 3^2 * 5^2 - * == 57600 - * - * Currently HZ is defined to be 100 for this platform. - * - * Fine. - */ - return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) - >> REGGETIM(pll, SYS_PLL, FS); -} - -static inline u32 ns9xxx_cpuclock(void) __attribute__((const)); -static inline u32 ns9xxx_cpuclock(void) -{ - return ns9xxx_systemclock() / 2; -} - -static inline u32 ns9xxx_ahbclock(void) __attribute__((const)); -static inline u32 ns9xxx_ahbclock(void) -{ - return ns9xxx_systemclock() / 4; -} - -static inline u32 ns9xxx_bbusclock(void) __attribute__((const)); -static inline u32 ns9xxx_bbusclock(void) -{ - return ns9xxx_systemclock() / 8; -} - -#endif /* ifndef __ASM_ARCH_CLOCK_H */ diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 5c706dd2379..89a21c53046 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/entry-macro.S * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -9,7 +9,7 @@ * the Free Software Foundation. */ #include -#include +#include .macro get_irqnr_preamble, base, tmp ldr \base, =SYS_ISRADDR diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h index 25d8d28b27f..e83d48ec42c 100644 --- a/include/asm-arm/arch-ns9xxx/irqs.h +++ b/include/asm-arm/arch-ns9xxx/irqs.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/irqs.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,38 +11,39 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#define IRQ_WATCHDOG 0 -#define IRQ_AHBBUSERR 1 -#define IRQ_BBUSAGG 2 +/* NetSilicon 9360 */ +#define IRQ_NS9XXX_WATCHDOG 0 +#define IRQ_NS9XXX_AHBBUSERR 1 +#define IRQ_NS9360_BBUSAGG 2 /* irq 3 is reserved for NS9360 */ -#define IRQ_ETHRX 4 -#define IRQ_ETHTX 5 -#define IRQ_ETHPHY 6 -#define IRQ_LCD 7 -#define IRQ_SERBRX 8 -#define IRQ_SERBTX 9 -#define IRQ_SERARX 10 -#define IRQ_SERATX 11 -#define IRQ_SERCRX 12 -#define IRQ_SERCTX 13 -#define IRQ_I2C 14 -#define IRQ_BBUSDMA 15 -#define IRQ_TIMER0 16 -#define IRQ_TIMER1 17 -#define IRQ_TIMER2 18 -#define IRQ_TIMER3 19 -#define IRQ_TIMER4 20 -#define IRQ_TIMER5 21 -#define IRQ_TIMER6 22 -#define IRQ_TIMER7 23 -#define IRQ_RTC 24 -#define IRQ_USBHOST 25 -#define IRQ_USBDEVICE 26 -#define IRQ_IEEE1284 27 -#define IRQ_EXT0 28 -#define IRQ_EXT1 29 -#define IRQ_EXT2 30 -#define IRQ_EXT3 31 +#define IRQ_NS9XXX_ETHRX 4 +#define IRQ_NS9XXX_ETHTX 5 +#define IRQ_NS9XXX_ETHPHY 6 +#define IRQ_NS9360_LCD 7 +#define IRQ_NS9360_SERBRX 8 +#define IRQ_NS9360_SERBTX 9 +#define IRQ_NS9360_SERARX 10 +#define IRQ_NS9360_SERATX 11 +#define IRQ_NS9360_SERCRX 12 +#define IRQ_NS9360_SERCTX 13 +#define IRQ_NS9360_I2C 14 +#define IRQ_NS9360_BBUSDMA 15 +#define IRQ_NS9360_TIMER0 16 +#define IRQ_NS9360_TIMER1 17 +#define IRQ_NS9360_TIMER2 18 +#define IRQ_NS9360_TIMER3 19 +#define IRQ_NS9360_TIMER4 20 +#define IRQ_NS9360_TIMER5 21 +#define IRQ_NS9360_TIMER6 22 +#define IRQ_NS9360_TIMER7 23 +#define IRQ_NS9360_RTC 24 +#define IRQ_NS9360_USBHOST 25 +#define IRQ_NS9360_USBDEVICE 26 +#define IRQ_NS9360_IEEE1284 27 +#define IRQ_NS9XXX_EXT0 28 +#define IRQ_NS9XXX_EXT1 29 +#define IRQ_NS9XXX_EXT2 30 +#define IRQ_NS9XXX_EXT3 31 #define BBUS_IRQ(irq) (32 + irq) @@ -67,7 +68,7 @@ /* * these Interrupts are specific for the a9m9750dev board. * They are generated by an FPGA that interrupts the CPU on - * IRQ_EXT2 + * IRQ_NS9360_EXT2 */ #define FPGA_IRQ(irq) (64 + irq) diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h new file mode 100644 index 00000000000..f3aa6c50dbe --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/processor-ns9360.h @@ -0,0 +1,32 @@ +/* + * include/asm-arm/arch-ns9xxx/processor-ns9360.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PROCESSORNS9360_H +#define __ASM_ARCH_PROCESSORNS9360_H + +#include + +void ns9360_reset(char mode); + +unsigned long ns9360_systemclock(void) __attribute__((const)); + +static inline unsigned long ns9360_cpuclock(void) __attribute__((const)); +static inline unsigned long ns9360_cpuclock(void) +{ + return ns9360_systemclock() / 2; +} + +void __init ns9360_map_io(void); + +extern struct sys_timer ns9360_timer; + +int ns9360_gpio_configure(unsigned gpio, int inv, int func); + +#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h new file mode 100644 index 00000000000..956c57cb781 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-sys-common.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-sys-common.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_REGSSYSCOMMON_H +#define __ASM_ARCH_REGSSYSCOMMON_H +#include + +/* Interrupt Vector Address Register Level x */ +#define SYS_IVA(x) __REG2(0xa09000c4, (x)) + +/* Interrupt Configuration registers */ +#define SYS_IC(x) __REG2(0xa0900144, (x)) + +/* ISRADDR */ +#define SYS_ISRADDR __REG(0xa0900164) + +/* Interrupt Status Active */ +#define SYS_ISA __REG(0xa0900168) + +/* Interrupt Status Raw */ +#define SYS_ISR __REG(0xa090016c) + +#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h new file mode 100644 index 00000000000..318b6945afb --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h @@ -0,0 +1,148 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h + * + * Copyright (C) 2006,2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_REGSSYSNS9360_H +#define __ASM_ARCH_REGSSYSNS9360_H + +#include + +/* System Control Module */ + +/* AHB Arbiter Gen Configuration */ +#define SYS_AHBAGENCONF __REG(0xa0900000) + +/* BRC */ +#define SYS_BRC(x) __REG2(0xa0900004, (x)) + +/* Timer x Reload Count register */ +#define SYS_TRC(x) __REG2(0xa0900044, (x)) + +/* Timer x Read register */ +#define SYS_TR(x) __REG2(0xa0900084, (x)) + +/* Timer Interrupt Status register */ +#define SYS_TIS __REG(0xa0900170) + +/* PLL Configuration register */ +#define SYS_PLL __REG(0xa0900188) + +/* PLL FS status */ +#define SYS_PLL_FS __REGBITS(24, 23) + +/* PLL ND status */ +#define SYS_PLL_ND __REGBITS(20, 16) + +/* PLL Configuration register: PLL SW change */ +#define SYS_PLL_SWC __REGBIT(15) +#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) +#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1) + +/* Timer x Control register */ +#define SYS_TC(x) __REG2(0xa0900190, (x)) + +/* Timer x Control register: Timer enable */ +#define SYS_TCx_TEN __REGBIT(15) +#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0) +#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) + +/* Timer x Control register: CPU debug mode */ +#define SYS_TCx_TDBG __REGBIT(10) +#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0) +#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1) + +/* Timer x Control register: Interrupt clear */ +#define SYS_TCx_INTC __REGBIT(9) +#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0) +#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1) + +/* Timer x Control register: Timer clock select */ +#define SYS_TCx_TLCS __REGBITS(8, 6) +#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */ +#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */ +#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */ +#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */ +#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */ +#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */ +#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */ +#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7) + +/* Timer x Control register: Timer mode */ +#define SYS_TCx_TM __REGBITS(5, 4) +#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */ +#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */ +#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */ +#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */ + +/* Timer x Control register: Interrupt select */ +#define SYS_TCx_INTS __REGBIT(3) +#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0) +#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1) + +/* Timer x Control register: Up/down select */ +#define SYS_TCx_UDS __REGBIT(2) +#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0) +#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1) + +/* Timer x Control register: 32- or 16-bit timer */ +#define SYS_TCx_TSZ __REGBIT(1) +#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0) +#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1) + +/* Timer x Control register: Reload enable */ +#define SYS_TCx_REN __REGBIT(0) +#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0) +#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1) + +/* System Memory Chip Select x Dynamic Memory Base */ +#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1) + +/* System Memory Chip Select x Dynamic Memory Mask */ +#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1) + +/* System Memory Chip Select x Static Memory Base */ +#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1) + +/* System Memory Chip Select x Static Memory Base: Chip select x base */ +#define SYS_SMCSSMB_CSxB __REGBITS(31, 12) + +/* System Memory Chip Select x Static Memory Mask */ +#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1) + +/* System Memory Chip Select x Static Memory Mask: Chip select x mask */ +#define SYS_SMCSSMM_CSxM __REGBITS(31, 12) + +/* System Memory Chip Select x Static Memory Mask: Chip select x enable */ +#define SYS_SMCSSMM_CSEx __REGBIT(0) +#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0) +#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1) + +/* General purpose, user-defined ID register */ +#define SYS_GENID __REG(0xa0900210) + +/* External Interrupt x Control register */ +#define SYS_EIC(x) __REG2(0xa0900214, (x)) + +/* External Interrupt x Control register: Status */ +#define SYS_EIC_STS __REGBIT(3) + +/* External Interrupt x Control register: Clear */ +#define SYS_EIC_CLR __REGBIT(2) + +/* External Interrupt x Control register: Polarity */ +#define SYS_EIC_PLTY __REGBIT(1) +#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0) +#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1) + +/* External Interrupt x Control register: Level edge */ +#define SYS_EIC_LVEDG __REGBIT(0) +#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) +#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) + +#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys.h deleted file mode 100644 index 749262f8620..00000000000 --- a/include/asm-arm/arch-ns9xxx/regs-sys.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-sys.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSSYS_H -#define __ASM_ARCH_REGSSYS_H - -#include - -/* System Control Module */ - -/* AHB Arbiter Gen Configuration */ -#define SYS_AHBAGENCONF __REG(0xa0900000) - -/* BRC */ -#define SYS_BRC(x) __REG2(0xa0900004, (x)) - -/* Timer x Reload Count register */ -#define SYS_TRC(x) __REG2(0xa0900044, (x)) - -/* Timer x Read register */ -#define SYS_TR(x) __REG2(0xa0900084, (x)) - -/* Interrupt Vector Address Register Level x */ -#define SYS_IVA(x) __REG2(0xa09000c4, (x)) - -/* Interrupt Configuration registers */ -#define SYS_IC(x) __REG2(0xa0900144, (x)) - -/* ISRADDR */ -#define SYS_ISRADDR __REG(0xa0900164) - -/* Interrupt Status Active */ -#define SYS_ISA __REG(0xa0900168) - -/* Interrupt Status Raw */ -#define SYS_ISR __REG(0xa090016c) - -/* Timer Interrupt Status register */ -#define SYS_TIS __REG(0xa0900170) - -/* PLL Configuration register */ -#define SYS_PLL __REG(0xa0900188) - -/* PLL FS status */ -#define SYS_PLL_FS __REGBITS(24, 23) - -/* PLL ND status */ -#define SYS_PLL_ND __REGBITS(20, 16) - -/* PLL Configuration register: PLL SW change */ -#define SYS_PLL_SWC __REGBIT(15) -#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) -#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1) - -/* Timer x Control register */ -#define SYS_TC(x) __REG2(0xa0900190, (x)) - -/* Timer x Control register: Timer enable */ -#define SYS_TCx_TEN __REGBIT(15) -#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0) -#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) - -/* Timer x Control register: CPU debug mode */ -#define SYS_TCx_TDBG __REGBIT(10) -#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0) -#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1) - -/* Timer x Control register: Interrupt clear */ -#define SYS_TCx_INTC __REGBIT(9) -#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0) -#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1) - -/* Timer x Control register: Timer clock select */ -#define SYS_TCx_TLCS __REGBITS(8, 6) -#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */ -#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */ -#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */ -#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */ -#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */ -#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */ -#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */ -#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7) - -/* Timer x Control register: Timer mode */ -#define SYS_TCx_TM __REGBITS(5, 4) -#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */ -#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */ -#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */ -#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */ - -/* Timer x Control register: Interrupt select */ -#define SYS_TCx_INTS __REGBIT(3) -#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0) -#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1) - -/* Timer x Control register: Up/down select */ -#define SYS_TCx_UDS __REGBIT(2) -#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0) -#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1) - -/* Timer x Control register: 32- or 16-bit timer */ -#define SYS_TCx_TSZ __REGBIT(1) -#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0) -#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1) - -/* Timer x Control register: Reload enable */ -#define SYS_TCx_REN __REGBIT(0) -#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0) -#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1) - -/* System Memory Chip Select x Dynamic Memory Base */ -#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1) - -/* System Memory Chip Select x Dynamic Memory Mask */ -#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1) - -/* System Memory Chip Select x Static Memory Base */ -#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1) - -/* System Memory Chip Select x Static Memory Base: Chip select x base */ -#define SYS_SMCSSMB_CSxB __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask */ -#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1) - -/* System Memory Chip Select x Static Memory Mask: Chip select x mask */ -#define SYS_SMCSSMM_CSxM __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask: Chip select x enable */ -#define SYS_SMCSSMM_CSEx __REGBIT(0) -#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0) -#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1) - -/* General purpose, user-defined ID register */ -#define SYS_GENID __REG(0xa0900210) - -/* External Interrupt x Control register */ -#define SYS_EIC(x) __REG2(0xa0900214, (x)) - -/* External Interrupt x Control register: Status */ -#define SYS_EIC_STS __REGBIT(3) - -/* External Interrupt x Control register: Clear */ -#define SYS_EIC_CLR __REGBIT(2) - -/* External Interrupt x Control register: Polarity */ -#define SYS_EIC_PLTY __REGBIT(1) -#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0) -#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1) - -/* External Interrupt x Control register: Level edge */ -#define SYS_EIC_LVEDG __REGBIT(0) -#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) -#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) - -#endif /* ifndef __ASM_ARCH_REGSSYS_H */ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h index c1082bd8977..1348073afe4 100644 --- a/include/asm-arm/arch-ns9xxx/system.h +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/system.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -12,8 +12,8 @@ #define __ASM_ARCH_SYSTEM_H #include -#include -#include +#include +#include static inline void arch_idle(void) { @@ -22,11 +22,12 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - u32 reg; - - reg = __raw_readl(SYS_PLL) >> 16; - REGSET(reg, SYS_PLL, SWC, YES); - __raw_writel(reg, SYS_PLL); +#ifdef CONFIG_PROCESSOR_NS9360 + if (processor_is_ns9360()) + ns9360_reset(mode); + else +#endif + BUG(); BUG(); } -- cgit v1.2.3-70-g09d2 From a287453e37a11a128ee0761e1db2e79d7faacdb3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 6 Feb 2008 15:10:41 +0100 Subject: ns9xxx: let putc autodetect where to write MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now putc writes to the first enabled internal UART. If there is none the external UART on the a9m9750dev board is used (if enabled). Otherwise there is no output. Signed-off-by: Uwe Kleine-König --- include/asm-arm/arch-ns9xxx/uncompress.h | 143 +++++++++++++++++++++++++++++-- 1 file changed, 136 insertions(+), 7 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h index 961ca7dc995..71066baceab 100644 --- a/include/asm-arm/arch-ns9xxx/uncompress.h +++ b/include/asm-arm/arch-ns9xxx/uncompress.h @@ -11,20 +11,149 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -static void putc(char c) +#include + +#define __REG(x) ((void __iomem __force *)(x)) + +static void putc_dummy(char c, void __iomem *base) { - volatile u8 *base = (volatile u8 *)0x40000000; - int t = 0x10000; + /* nothing */ +} +static void putc_ns9360(char c, void __iomem *base) +{ + static int t = 0x10000; + do { + if (t) + --t; + + if (__raw_readl(base + 8) & (1 << 3)) { + __raw_writeb(c, base + 16); + t = 0x10000; + break; + } + } while (t); +} + +static void putc_a9m9750dev(char c, void __iomem *base) +{ + static int t = 0x10000; + do { + if (t) + --t; + + if (__raw_readb(base + 5) & (1 << 5)) { + __raw_writeb(c, base); + t = 0x10000; + break; + } + } while (t); + +} + +static void putc_ns921x(char c, void __iomem *base) +{ + static int t = 0x10000; do { - if (base[5] & 0x20) { - base[0] = c; + if (t) + --t; + + if (!(__raw_readl(base) & (1 << 11))) { + __raw_writeb(c, base + 0x0028); + t = 0x10000; break; } - } while (--t); + } while (t); } -#define arch_decomp_setup() +#define MSCS __REG(0xA0900184) + +#define NS9360_UARTA __REG(0x90200040) +#define NS9360_UARTB __REG(0x90200000) +#define NS9360_UARTC __REG(0x90300000) +#define NS9360_UARTD __REG(0x90300040) + +#define NS9360_UART_ENABLED(base) \ + (__raw_readl(NS9360_UARTA) & (1 << 31)) + +#define A9M9750DEV_UARTA __REG(0x40000000) + +#define NS921XSYS_CLOCK __REG(0xa090017c) +#define NS921X_UARTA __REG(0x90010000) +#define NS921X_UARTB __REG(0x90018000) +#define NS921X_UARTC __REG(0x90020000) +#define NS921X_UARTD __REG(0x90028000) + +#define NS921X_UART_ENABLED(base) \ + (__raw_readl((base) + 0x1000) & (1 << 29)) + +static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) +{ + if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { + /* ns9360 or ns9750 */ + if (NS9360_UART_ENABLED(NS9360_UARTA)) { + *putc = putc_ns9360; + *base = NS9360_UARTA; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTB)) { + *putc = putc_ns9360; + *base = NS9360_UARTB; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTC)) { + *putc = putc_ns9360; + *base = NS9360_UARTC; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTD)) { + *putc = putc_ns9360; + *base = NS9360_UARTD; + return; + } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) { + *putc = putc_a9m9750dev; + *base = A9M9750DEV_UARTA; + return; + } + } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) { + /* ns921x */ + u32 clock = __raw_readl(NS921XSYS_CLOCK); + + if ((clock & (1 << 1)) && + NS921X_UART_ENABLED(NS921X_UARTA)) { + *putc = putc_ns921x; + *base = NS921X_UARTA; + return; + } else if ((clock & (1 << 2)) && + NS921X_UART_ENABLED(NS921X_UARTB)) { + *putc = putc_ns921x; + *base = NS921X_UARTB; + return; + } else if ((clock & (1 << 3)) && + NS921X_UART_ENABLED(NS921X_UARTC)) { + *putc = putc_ns921x; + *base = NS921X_UARTC; + return; + } else if ((clock & (1 << 4)) && + NS921X_UART_ENABLED(NS921X_UARTD)) { + *putc = putc_ns921x; + *base = NS921X_UARTD; + return; + } + } + + *putc = putc_dummy; +} + +void (*myputc)(char, void __iomem *); +void __iomem *base; + +static void putc(char c) +{ + myputc(c, base); +} + +static void arch_decomp_setup(void) +{ + autodetect(&myputc, &base); +} #define arch_decomp_wdog() static void flush(void) -- cgit v1.2.3-70-g09d2 From f304fc422d9f159badb0edfa5921611a2fa371c7 Mon Sep 17 00:00:00 2001 From: Robert Schwebel Date: Fri, 28 Mar 2008 10:59:08 +0100 Subject: [ARM] 4876/1: i.MXC family: Clean up From: Juergen Beisert Clean up current header files from doxygen style comments. There are probably more such comments left, but we start with these. Things happend since last review: - needless blank lines removed (note by Russell King) - re-format comments (note by Ross Wille) Signed-off-by: Juergen Beisert Signed-off-by: Ross Wille Signed-off-by: Russell King --- include/asm-arm/arch-mxc/board-mx31ads.h | 124 ++++++++++++------------------- include/asm-arm/arch-mxc/dma.h | 7 -- include/asm-arm/arch-mxc/hardware.h | 8 +- include/asm-arm/arch-mxc/io.h | 15 +--- include/asm-arm/arch-mxc/irqs.h | 17 +---- include/asm-arm/arch-mxc/memory.h | 13 +--- include/asm-arm/arch-mxc/mxc.h | 6 +- include/asm-arm/arch-mxc/system.h | 18 +---- include/asm-arm/arch-mxc/vmalloc.h | 14 +--- 9 files changed, 61 insertions(+), 161 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h index be29b83ad4a..8590127760a 100644 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ b/include/asm-arm/arch-mxc/board-mx31ads.h @@ -11,107 +11,77 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -/*! - * @name PBC Controller parameters - */ -/*! @{ */ -/*! - * Base address of PBC controller - */ +/* Base address of PBC controller */ #define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) /* Offsets for the PBC Controller register */ -/*! - * PBC Board status register offset - */ + +/* PBC Board status register offset */ #define PBC_BSTAT 0x000002 -/*! - * PBC Board control register 1 set address. - */ + +/* PBC Board control register 1 set address */ #define PBC_BCTRL1_SET 0x000004 -/*! - * PBC Board control register 1 clear address. - */ + +/* PBC Board control register 1 clear address */ #define PBC_BCTRL1_CLEAR 0x000006 -/*! - * PBC Board control register 2 set address. - */ + +/* PBC Board control register 2 set address */ #define PBC_BCTRL2_SET 0x000008 -/*! - * PBC Board control register 2 clear address. - */ + +/* PBC Board control register 2 clear address */ #define PBC_BCTRL2_CLEAR 0x00000A -/*! - * PBC Board control register 3 set address. - */ + +/* PBC Board control register 3 set address */ #define PBC_BCTRL3_SET 0x00000C -/*! - * PBC Board control register 3 clear address. - */ + +/* PBC Board control register 3 clear address */ #define PBC_BCTRL3_CLEAR 0x00000E -/*! - * PBC Board control register 4 set address. - */ + +/* PBC Board control register 4 set address */ #define PBC_BCTRL4_SET 0x000010 -/*! - * PBC Board control register 4 clear address. - */ + +/* PBC Board control register 4 clear address */ #define PBC_BCTRL4_CLEAR 0x000012 -/*! - * PBC Board status register 1. - */ + +/* PBC Board status register 1 */ #define PBC_BSTAT1 0x000014 -/*! - * PBC Board interrupt status register. - */ + +/* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 -/*! - * PBC Board interrupt current status register. - */ + +/* PBC Board interrupt current status register */ #define PBC_INTCURR_STATUS 0x000018 -/*! - * PBC Interrupt mask register set address. - */ + +/* PBC Interrupt mask register set address */ #define PBC_INTMASK_SET 0x00001A -/*! - * PBC Interrupt mask register clear address. - */ + +/* PBC Interrupt mask register clear address */ #define PBC_INTMASK_CLEAR 0x00001C -/*! - * External UART A. - */ +/* External UART A */ #define PBC_SC16C652_UARTA 0x010000 -/*! - * External UART B. - */ + +/* External UART B */ #define PBC_SC16C652_UARTB 0x010010 -/*! - * Ethernet Controller IO base address. - */ + +/* Ethernet Controller IO base address */ #define PBC_CS8900A_IOBASE 0x020000 -/*! - * Ethernet Controller Memory base address. - */ + +/* Ethernet Controller Memory base address */ #define PBC_CS8900A_MEMBASE 0x021000 -/*! - * Ethernet Controller DMA base address. - */ + +/* Ethernet Controller DMA base address */ #define PBC_CS8900A_DMABASE 0x022000 -/*! - * External chip select 0. - */ + +/* External chip select 0 */ #define PBC_XCS0 0x040000 -/*! - * LCD Display enable. - */ + +/* LCD Display enable */ #define PBC_LCD_EN_B 0x060000 -/*! - * Code test debug enable. - */ + +/* Code test debug enable */ #define PBC_CODE_B 0x070000 -/*! - * PSRAM memory select. - */ + +/* PSRAM memory select */ #define PBC_PSRAM_B 0x5000000 #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) @@ -139,4 +109,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h index 65e639d51d2..c822d569a05 100644 --- a/include/asm-arm/arch-mxc/dma.h +++ b/include/asm-arm/arch-mxc/dma.h @@ -11,11 +11,4 @@ #ifndef __ASM_ARCH_MXC_DMA_H__ #define __ASM_ARCH_MXC_DMA_H__ -/*! - * @file dma.h - * @brief This file contains Unified DMA API for all MXC platforms. - * The API is platform independent. - * - * @ingroup SDMA - */ #endif diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index 3c09b92fef0..e70387e91b7 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -8,12 +8,6 @@ * published by the Free Software Foundation. */ -/*! - * @file hardware.h - * @brief This file contains the hardware definitions of the board. - * - * @ingroup System - */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ @@ -49,4 +43,4 @@ MXC_MAX_EXP_IO_LINES + \ MXC_MAX_VIRTUAL_INTS) -#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ +#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h index cf6c83a4b9f..65b6810124c 100644 --- a/include/asm-arm/arch-mxc/io.h +++ b/include/asm-arm/arch-mxc/io.h @@ -8,24 +8,13 @@ * published by the Free Software Foundation. */ -/*! - * @file io.h - * @brief This file contains some memory mapping macros. - * @note There is no real ISA or PCI buses. But have to define these macros - * for some drivers to compile. - * - * @ingroup System - */ - #ifndef __ASM_ARCH_MXC_IO_H__ #define __ASM_ARCH_MXC_IO_H__ -/*! Allow IO space to be anywhere in the memory */ +/* Allow IO space to be anywhere in the memory */ #define IO_SPACE_LIMIT 0xffffffff -/*! - * io address mapping macro - */ +/* io address mapping macro */ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index e4686c6bc4b..a64e66ba4ae 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -13,26 +13,15 @@ #include -/*! - * @file irqs.h - * @brief This file defines the number of normal interrupts and fast interrupts - * - * @ingroup Interrupt - */ - #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE) #define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) -/*! - * Number of normal interrupts - */ +/* Number of normal interrupts */ #define NR_IRQS MXC_MAX_INTS -/*! - * Number of fast interrupts - */ +/* Number of fast interrupts */ #define NR_FIQS MXC_MAX_INTS -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ +#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h index c89aac83a40..059f83023a1 100644 --- a/include/asm-arm/arch-mxc/memory.h +++ b/include/asm-arm/arch-mxc/memory.h @@ -13,24 +13,17 @@ #include -/*! - * @file memory.h - * @brief This file contains macros needed by the Linux kernel and drivers. - * - * @ingroup Memory - */ - -/*! +/* * Virtual view <-> DMA view memory address translations * This macro is used to translate the virtual address to an address * suitable to be passed to set_dma_addr() */ #define __virt_to_bus(a) __virt_to_phys(a) -/*! +/* * Used to convert an address for DMA operations to an address that the * kernel can use. */ #define __bus_to_virt(a) __phys_to_virt(a) -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ +#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 0837f1f9ca3..f1349734b8a 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -31,9 +31,7 @@ #define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20) #define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24) -/*! - * GPT Control register bit definitions - */ +/* GPT Control register bit definitions */ #define GPTCR_FO3 (1 << 31) #define GPTCR_FO2 (1 << 30) #define GPTCR_FO1 (1 << 29) @@ -146,4 +144,4 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#endif /* __ASM_ARCH_MXC_H__ */ +#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h index 109956b41ac..bbfc37465fc 100644 --- a/include/asm-arm/arch-mxc/system.h +++ b/include/asm-arm/arch-mxc/system.h @@ -21,30 +21,14 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -/*! - * @file system.h - * @brief This file contains idle and reset functions. - * - * @ingroup System - */ - -/*! - * This function puts the CPU into idle mode. It is called by default_idle() - * in process.c file. - */ static inline void arch_idle(void) { cpu_do_idle(); } -/* - * This function resets the system. It is called by machine_restart(). - * - * @param mode indicates different kinds of resets - */ static inline void arch_reset(char mode) { cpu_reset(0); } -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ +#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h index 83a73da895e..62d97623412 100644 --- a/include/asm-arm/arch-mxc/vmalloc.h +++ b/include/asm-arm/arch-mxc/vmalloc.h @@ -20,17 +20,7 @@ #ifndef __ASM_ARCH_MXC_VMALLOC_H__ #define __ASM_ARCH_MXC_VMALLOC_H__ -/*! - * @file vmalloc.h - * - * @brief This file contains platform specific macros for vmalloc. - * - * @ingroup System - */ - -/*! - * vmalloc ending address - */ +/* vmalloc ending address */ #define VMALLOC_END 0xF4000000 -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ +#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ -- cgit v1.2.3-70-g09d2 From b78eabde89f9b19d463a77abe420508c0ef29249 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 2 Apr 2008 21:38:40 +0100 Subject: [ARM] 4902/1: [AT91] SAM9/CAP9 memory controller header The AT91CAP9 processor includes the same Static Memory Controller (SMC) peripheral as the SAM9 processors, but replaces the SDRAM Controller with a DDR/SDR Controller (DDRSDRC). This patch splits the existing include/asm-arm/arch-at91/at91sam926x_mc.h into at91sam9_sdramc.h and at91sam9_smc.h. It also adds an at91cap9_ddrsdr.h for the DDRSDRC controller. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91cap9_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- arch/arm/mach-at91/board-cap9adk.c | 2 +- arch/arm/mach-at91/board-sam9260ek.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 2 +- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9rlek.c | 2 +- include/asm-arm/arch-at91/at91cap9_ddrsdr.h | 100 ++++++++++++++++++++ include/asm-arm/arch-at91/at91sam926x_mc.h | 141 ---------------------------- include/asm-arm/arch-at91/at91sam9_sdramc.h | 83 ++++++++++++++++ include/asm-arm/arch-at91/at91sam9_smc.h | 73 ++++++++++++++ 14 files changed, 266 insertions(+), 151 deletions(-) create mode 100644 include/asm-arm/arch-at91/at91cap9_ddrsdr.h delete mode 100644 include/asm-arm/arch-at91/at91sam926x_mc.h create mode 100644 include/asm-arm/arch-at91/at91sam9_sdramc.h create mode 100644 include/asm-arm/arch-at91/at91sam9_smc.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index c50fad9cd14..0c341a4624f 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -23,8 +23,8 @@ #include #include #include -#include #include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 105f8403860..b758e66c60f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,8 +19,8 @@ #include #include #include -#include #include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 245641263fc..48ecbeffd9b 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 0b12e1adcc8..fc14af8617f 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -22,8 +22,8 @@ #include #include #include -#include #include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f43b5c33e45..fb74b33bba6 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 18543713154..e5512d1ff21 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -45,7 +45,7 @@ #include #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index b343a6c2812..8c657a9288e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -37,7 +37,7 @@ #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 0ce38dfa6eb..f71ff750b3d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -44,7 +44,7 @@ #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bf103b24c93..a65bd165402 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -43,7 +43,7 @@ #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index bc0546d7245..ce83b60c450 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -29,7 +29,7 @@ #include #include -#include +#include #include "generic.h" diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h new file mode 100644 index 00000000000..efdb23af1ee --- /dev/null +++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h @@ -0,0 +1,100 @@ +/* + * include/asm-arm/arch-at91/at91cap9_ddrsdr.h + * + * DDR/SDR Controller (DDRSDRC) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_DDRSDR_H +#define AT91CAP9_DDRSDR_H + +#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ + +#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_DDR 2 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 + +#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ + + +#endif diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h deleted file mode 100644 index d82631c251f..00000000000 --- a/include/asm-arm/arch-at91/at91sam926x_mc.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam926x_mc.h - * - * Memory Controllers (SMC, SDRAMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM926x_MC_H -#define AT91SAM926x_MC_H - -/* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL 0 -#define AT91_SDRAMC_MODE_NOP 1 -#define AT91_SDRAMC_MODE_PRECHARGE 2 -#define AT91_SDRAMC_MODE_LMR 3 -#define AT91_SDRAMC_MODE_REFRESH 4 -#define AT91_SDRAMC_MODE_EXT_LMR 5 -#define AT91_SDRAMC_MODE_DEEP 6 - -#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_1 (1 << 5) -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_CAS_3 (3 << 5) -#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 7) -#define AT91_SDRAMC_DBW_16 (1 << 7) -#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ -#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_SDRAMC_LPCB_DISABLE 0 -#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ -#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ -#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ - -#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ -#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -#define AT91_SDRAMC_MD_SDRAM 0 -#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 - - -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -#define AT91_SMC_NWESETUP_(x) ((x) << 0) -#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) - -#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) - -#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) - -#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -#define AT91_SMC_EXNWMODE_READY (3 << 4) -#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -#define AT91_SMC_BAT_SELECT (0 << 8) -#define AT91_SMC_BAT_WRITE (1 << 8) -#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -#define AT91_SMC_DBW_8 (0 << 12) -#define AT91_SMC_DBW_16 (1 << 12) -#define AT91_SMC_DBW_32 (2 << 12) -#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -#define AT91_SMC_TDF_(x) ((x) << 16) -#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -#define AT91_SMC_PS (3 << 28) /* Page Size */ -#define AT91_SMC_PS_4 (0 << 28) -#define AT91_SMC_PS_8 (1 << 28) -#define AT91_SMC_PS_16 (2 << 28) -#define AT91_SMC_PS_32 (3 << 28) - -#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#endif - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h new file mode 100644 index 00000000000..d3b8b3da6b4 --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h @@ -0,0 +1,83 @@ +/* + * include/asm-arm/arch-at91/at91sam9_sdramc.h + * + * SDRAM Controllers (SDRAMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SDRAMC_H +#define AT91SAM9_SDRAMC_H + +/* SDRAM Controller (SDRAMC) registers */ +#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL 0 +#define AT91_SDRAMC_MODE_NOP 1 +#define AT91_SDRAMC_MODE_PRECHARGE 2 +#define AT91_SDRAMC_MODE_LMR 3 +#define AT91_SDRAMC_MODE_REFRESH 4 +#define AT91_SDRAMC_MODE_EXT_LMR 5 +#define AT91_SDRAMC_MODE_DEEP 6 + +#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_1 (1 << 5) +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_CAS_3 (3 << 5) +#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 7) +#define AT91_SDRAMC_DBW_16 (1 << 7) +#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_SDRAMC_LPCB_DISABLE 0 +#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 +#define AT91_SDRAMC_LPCB_POWER_DOWN 2 +#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ +#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ + +#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ +#define AT91_SDRAMC_MD_SDRAM 0 +#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 + + +#endif diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h new file mode 100644 index 00000000000..9e49eed31e5 --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9_smc.h @@ -0,0 +1,73 @@ +/* + * include/asm-arm/arch-at91/at91sam9_smc.h + * + * Static Memory Controllers (SMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SMC_H +#define AT91SAM9_SMC_H + +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + +#endif -- cgit v1.2.3-70-g09d2 From d7a2415f7a48ce4fc16cc769f96d0df818648837 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 2 Apr 2008 21:44:44 +0100 Subject: [ARM] 4904/1: [AT91] Pass ECC controller to NAND driver On AT91 processors that include an ECC controller, pass its base address to the NAND driver via platform_device resources. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91cap9_devices.c | 7 ++++++- arch/arm/mach-at91/at91sam9260_devices.c | 7 ++++++- arch/arm/mach-at91/at91sam9263_devices.c | 7 ++++++- arch/arm/mach-at91/at91sam9rl_devices.c | 7 ++++++- include/asm-arm/arch-at91/at91_ecc.h | 10 +++++----- 5 files changed, 29 insertions(+), 9 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 0c341a4624f..10f15f3a56c 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -283,10 +283,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index b758e66c60f..d613761dc2f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -288,10 +288,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fc14af8617f..64aab9c9b97 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -358,10 +358,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC0, + .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index fb74b33bba6..2a0abd25e77 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -105,10 +105,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { - { + [0] = { .start = NAND_BASE, .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_BASE_SYS + AT91_ECC, + .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1, + .flags = IORESOURCE_MEM, } }; diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h index ff93df516d6..1e5a8caca2d 100644 --- a/include/asm-arm/arch-at91/at91_ecc.h +++ b/include/asm-arm/arch-at91/at91_ecc.h @@ -13,26 +13,26 @@ #ifndef AT91_ECC_H #define AT91_ECC_H -#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ +#define AT91_ECC_CR 0x00 /* Control register */ #define AT91_ECC_RST (1 << 0) /* Reset parity */ -#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ +#define AT91_ECC_MR 0x04 /* Mode register */ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ #define AT91_ECC_PAGESIZE_528 (0) #define AT91_ECC_PAGESIZE_1056 (1) #define AT91_ECC_PAGESIZE_2112 (2) #define AT91_ECC_PAGESIZE_4224 (3) -#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_SR 0x08 /* Status register */ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ -#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_PR 0x0c /* Parity register */ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ -#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPR 0x10 /* NParity register */ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif -- cgit v1.2.3-70-g09d2 From 565ac44593d17bdfc9f595614b56bb335a9b8d6f Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 2 Apr 2008 21:52:19 +0100 Subject: [ARM] 4907/1: [AT91] SAM9/CAP9 reset reason The Reset controller on the SAM9/CAP9 processors will store the reason for the last system reset. On startup, display this information (wakeup signal, RTT alarm, watchdog reset, user reset, etc) Based on patch from David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/pm.c | 74 ++++++++++++++++++++++++++++++++++ include/asm-arm/arch-at91/at91_shdwc.h | 2 + 2 files changed, 76 insertions(+) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 77d9669810e..39733b6992a 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -83,6 +83,79 @@ static inline void sdram_selfrefresh_enable(void) #endif +/* + * Show the reason for the previous system reset. + */ +#if defined(AT91_SHDWC) + +#include +#include + +static void __init show_reset_status(void) +{ + static char reset[] __initdata = "reset"; + + static char general[] __initdata = "general"; + static char wakeup[] __initdata = "wakeup"; + static char watchdog[] __initdata = "watchdog"; + static char software[] __initdata = "software"; + static char user[] __initdata = "user"; + static char unknown[] __initdata = "unknown"; + + static char signal[] __initdata = "signal"; + static char rtc[] __initdata = "rtc"; + static char rtt[] __initdata = "rtt"; + static char restore[] __initdata = "power-restored"; + + char *reason, *r2 = reset; + u32 reset_type, wake_type; + + reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + wake_type = at91_sys_read(AT91_SHDW_SR); + + switch (reset_type) { + case AT91_RSTC_RSTTYP_GENERAL: + reason = general; + break; + case AT91_RSTC_RSTTYP_WAKEUP: + /* board-specific code enabled the wakeup sources */ + reason = wakeup; + + /* "wakeup signal" */ + if (wake_type & AT91_SHDW_WAKEUP0) + r2 = signal; + else { + r2 = reason; + if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */ + reason = rtt; + else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */ + reason = rtc; + else if (wake_type == 0) /* power-restored wakeup */ + reason = restore; + else /* unknown wakeup */ + reason = unknown; + } + break; + case AT91_RSTC_RSTTYP_WATCHDOG: + reason = watchdog; + break; + case AT91_RSTC_RSTTYP_SOFTWARE: + reason = software; + break; + case AT91_RSTC_RSTTYP_USER: + reason = user; + break; + default: + reason = unknown; + break; + } + pr_info("AT91: Starting after %s %s\n", reason, r2); +} +#else +static void __init show_reset_status(void) {} +#endif + + static int at91_pm_valid_state(suspend_state_t state) { switch (state) { @@ -294,6 +367,7 @@ static int __init at91_pm_init(void) suspend_set_ops(&at91_pm_ops); + show_reset_status(); return 0; } arch_initcall(at91_pm_init); diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h index 01b433de227..581fa41d90e 100644 --- a/include/asm-arm/arch-at91/at91_shdwc.h +++ b/include/asm-arm/arch-at91/at91_shdwc.h @@ -24,10 +24,12 @@ #define AT91_SHDW_WKMODE0_LOW 2 #define AT91_SHDW_WKMODE0_ANYLEVEL 3 #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_(x) ((x) << 4) #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ +#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ #endif -- cgit v1.2.3-70-g09d2 From 32b1216d1e338d69cc5a11ca81fc247eb8ddfb2e Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 2 Apr 2008 22:31:31 +0100 Subject: [ARM] 4913/1: [AT91] PMC_MDIV definitions The allowed values for the MDIV field (Master Clock Division) in the PMC controller differ between the AT91RM9200 and AT91SAM9/CAP9. To remove possible confusion, change the definitions to be more explicit. Also define the Processor Clock Division bits. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91_pmc.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index 52cd8e5dabc..c2b13c28015 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -76,10 +76,17 @@ #define AT91_PMC_PRES_32 (5 << 2) #define AT91_PMC_PRES_64 (6 << 2) #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91_PMC_MDIV_1 (0 << 8) -#define AT91_PMC_MDIV_2 (1 << 8) -#define AT91_PMC_MDIV_3 (2 << 8) -#define AT91_PMC_MDIV_4 (3 << 8) +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ -- cgit v1.2.3-70-g09d2 From 45528e38173e7d8c03821850e8fd1ddbf16f2b3d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 10 Apr 2008 13:31:47 +0100 Subject: [ARM] 4961/1: gpiolib support for SA-1100 architecture This adds gpiolib support for the SA-1100 arch: - Move all GPIO API functions from generic.c into gpio.c - Convert all gpio functions into gpiolib callbacks. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-sa1100/Makefile | 2 +- arch/arm/mach-sa1100/generic.c | 31 ------------------ arch/arm/mach-sa1100/generic.h | 1 + arch/arm/mach-sa1100/gpio.c | 65 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-sa1100/irq.c | 2 ++ include/asm-arm/arch-sa1100/gpio.h | 31 +++++++----------- 7 files changed, 82 insertions(+), 51 deletions(-) create mode 100644 arch/arm/mach-sa1100/gpio.c (limited to 'include/asm-arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006..1f7c728f5ce 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -426,6 +426,7 @@ config ARCH_SA1100 select GENERIC_GPIO select GENERIC_TIME select HAVE_IDE + select HAVE_GPIO_LIB help Support for StrongARM 11x0 based boards. diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 7a61e8d33ab..8e0244631d6 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o +obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 5c84c604ed8..0c2fa1c4fb4 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -139,37 +139,6 @@ unsigned long long sched_clock(void) return v; } -int gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (gpio > GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - GPDR &= ~GPIO_GPIO(gpio); - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (gpio > GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - gpio_set_value(gpio, value); - GPDR |= GPIO_GPIO(gpio); - local_irq_restore(flags); - return 0; -} - -EXPORT_SYMBOL(gpio_direction_output); - /* * Default power-off for SA1100 */ diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index f085d68e568..793c2e6c991 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -9,6 +9,7 @@ struct sys_timer; extern struct sys_timer sa1100_timer; extern void __init sa1100_map_io(void); extern void __init sa1100_init_irq(void); +extern void __init sa1100_init_gpio(void); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c new file mode 100644 index 00000000000..372f1f4f54a --- /dev/null +++ b/arch/arm/mach-sa1100/gpio.c @@ -0,0 +1,65 @@ +/* + * linux/arch/arm/mach-sa1100/gpio.c + * + * Generic SA-1100 GPIO handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include +#include "generic.h" + +static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + return GPLR & GPIO_GPIO(offset); +} + +static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + GPSR = GPIO_GPIO(offset); + else + GPCR = GPIO_GPIO(offset); +} + +static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset) +{ + unsigned long flags; + + local_irq_save(flags); + GPDR &= ~GPIO_GPIO(offset); + local_irq_restore(flags); + return 0; +} + +static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + unsigned long flags; + + local_irq_save(flags); + sa1100_gpio_set(chip, offset, value); + GPDR |= GPIO_GPIO(offset); + local_irq_restore(flags); + return 0; +} + +static struct gpio_chip sa1100_gpio_chip = { + .label = "gpio", + .direction_input = sa1100_direction_input, + .direction_output = sa1100_direction_output, + .set = sa1100_gpio_set, + .get = sa1100_gpio_get, + .base = 0, + .ngpio = GPIO_MAX + 1, +}; + +void __init sa1100_init_gpio(void) +{ + gpiochip_add(&sa1100_gpio_chip); +} diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 3dc17d7bf38..fa0403af7ee 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -347,4 +347,6 @@ void __init sa1100_init_irq(void) */ set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip); set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); + + sa1100_init_gpio(); } diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h index e7a9d26e22a..93d3395b102 100644 --- a/include/asm-arm/arch-sa1100/gpio.h +++ b/include/asm-arm/arch-sa1100/gpio.h @@ -26,35 +26,28 @@ #include #include - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - return; -} - -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - +#include static inline int gpio_get_value(unsigned gpio) { - return GPLR & GPIO_GPIO(gpio); + if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) + return GPLR & GPIO_GPIO(gpio); + else + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned gpio, int value) { - if (value) - GPSR = GPIO_GPIO(gpio); + if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) + if (value) + GPSR = GPIO_GPIO(gpio); + else + GPCR = GPIO_GPIO(gpio); else - GPCR = GPIO_GPIO(gpio); + __gpio_set_value(gpio, value); } -#include /* cansleep wrappers */ +#define gpio_cansleep __gpio_cansleep static inline unsigned gpio_to_irq(unsigned gpio) { -- cgit v1.2.3-70-g09d2 From b43a9e60873ebe16502061961ca3f3b7bc6f69d2 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 10 Apr 2008 13:36:53 +0100 Subject: [ARM] 4962/1: Introduce standard gpio interface for Scoop2. This deprecates old set/reset_scoop_gpio interfacein favour of support for generic gpio interface. It requires gpiolib, so it depends on the previous patch (gpiolib for SA-1100). Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/common/scoop.c | 125 +++++++++++++++++++++++++++++++++++++-- include/asm-arm/hardware/scoop.h | 5 +- 2 files changed, 122 insertions(+), 8 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index fc08577cdd6..bc299b07a6f 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -16,6 +16,7 @@ #include #include #include +#include #include /* PCMCIA to Scoop linkage @@ -32,6 +33,7 @@ EXPORT_SYMBOL(platform_scoop_config); struct scoop_dev { void __iomem *base; + struct gpio_chip gpio; spinlock_t scoop_lock; unsigned short suspend_clr; unsigned short suspend_set; @@ -51,6 +53,77 @@ void reset_scoop(struct device *dev) iowrite16(0x0000, sdev->base + SCOOP_IRM); } +static void __scoop_gpio_set(struct scoop_dev *sdev, + unsigned offset, int value) +{ + unsigned short gpwr; + + gpwr = ioread16(sdev->base + SCOOP_GPWR); + if (value) + gpwr |= 1 << (offset + 1); + else + gpwr &= ~(1 << (offset + 1)); + iowrite16(gpwr, sdev->base + SCOOP_GPWR); +} + +static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + __scoop_gpio_set(sdev, offset, value); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); +} + +static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + + /* XXX: I'm usure, but it seems so */ + return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)); +} + +static int scoop_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + unsigned short gpcr; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + gpcr = ioread16(sdev->base + SCOOP_GPCR); + gpcr &= ~(1 << (offset + 1)); + iowrite16(gpcr, sdev->base + SCOOP_GPCR); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); + + return 0; +} + +static int scoop_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio); + unsigned long flags; + unsigned short gpcr; + + spin_lock_irqsave(&sdev->scoop_lock, flags); + + __scoop_gpio_set(sdev, offset, value); + + gpcr = ioread16(sdev->base + SCOOP_GPCR); + gpcr |= 1 << (offset + 1); + iowrite16(gpcr, sdev->base + SCOOP_GPCR); + + spin_unlock_irqrestore(&sdev->scoop_lock, flags); + + return 0; +} + unsigned short set_scoop_gpio(struct device *dev, unsigned short bit) { unsigned short gpio_bit; @@ -138,6 +211,8 @@ static int __devinit scoop_probe(struct platform_device *pdev) struct scoop_dev *devptr; struct scoop_config *inf; struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret; + int temp; if (!mem) return -EINVAL; @@ -152,8 +227,8 @@ static int __devinit scoop_probe(struct platform_device *pdev) devptr->base = ioremap(mem->start, mem->end - mem->start + 1); if (!devptr->base) { - kfree(devptr); - return -ENOMEM; + ret = -ENOMEM; + goto err_ioremap; } platform_set_drvdata(pdev, devptr); @@ -169,17 +244,55 @@ static int __devinit scoop_probe(struct platform_device *pdev) devptr->suspend_clr = inf->suspend_clr; devptr->suspend_set = inf->suspend_set; + devptr->gpio.base = -1; + + if (inf->gpio_base != 0) { + devptr->gpio.label = pdev->dev.bus_id; + devptr->gpio.base = inf->gpio_base; + devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */ + devptr->gpio.set = scoop_gpio_set; + devptr->gpio.get = scoop_gpio_get; + devptr->gpio.direction_input = scoop_gpio_direction_input; + devptr->gpio.direction_output = scoop_gpio_direction_output; + + ret = gpiochip_add(&devptr->gpio); + if (ret) + goto err_gpio; + } + return 0; + + if (devptr->gpio.base != -1) + temp = gpiochip_remove(&devptr->gpio); +err_gpio: + platform_set_drvdata(pdev, NULL); +err_ioremap: + iounmap(devptr->base); + kfree(devptr); + + return ret; } static int __devexit scoop_remove(struct platform_device *pdev) { struct scoop_dev *sdev = platform_get_drvdata(pdev); - if (sdev) { - iounmap(sdev->base); - kfree(sdev); - platform_set_drvdata(pdev, NULL); + int ret; + + if (!sdev) + return -EINVAL; + + if (sdev->gpio.base != -1) { + ret = gpiochip_remove(&sdev->gpio); + if (ret) { + dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret); + return ret; + } } + + platform_set_drvdata(pdev, NULL); + iounmap(sdev->base); + kfree(sdev); + return 0; } diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h index d37bf744326..dfb8330599f 100644 --- a/include/asm-arm/hardware/scoop.h +++ b/include/asm-arm/hardware/scoop.h @@ -40,6 +40,7 @@ struct scoop_config { unsigned short io_dir; unsigned short suspend_clr; unsigned short suspend_set; + int gpio_base; }; /* Structure for linking scoop devices to PCMCIA sockets */ @@ -62,7 +63,7 @@ struct scoop_pcmcia_config { extern struct scoop_pcmcia_config *platform_scoop_config; void reset_scoop(struct device *dev); -unsigned short set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); unsigned short read_scoop_reg(struct device *dev, unsigned short reg); void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); -- cgit v1.2.3-70-g09d2 From fdb72fd84c26438a7dd754a1cc74890aca7f1b77 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 15 Apr 2008 21:13:33 +0100 Subject: [ARM] 4981/1: [KS8695] Simple LED driver Simple gpio-connected LED driver for KS8695 platforms. (Based on old AT91 LED driver) Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-ks8695/Makefile | 3 ++ arch/arm/mach-ks8695/devices.c | 21 ++++++++ arch/arm/mach-ks8695/leds.c | 94 +++++++++++++++++++++++++++++++++++ include/asm-arm/arch-ks8695/devices.h | 5 ++ 4 files changed, 123 insertions(+) create mode 100644 arch/arm/mach-ks8695/leds.c (limited to 'include/asm-arm') diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 730a3af12c9..ade42b73afb 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -11,5 +11,8 @@ obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o +# LEDs +obj-$(CONFIG_LEDS) += leds.o + # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c index 386593f8ac6..3db2ec61d06 100644 --- a/arch/arm/mach-ks8695/devices.c +++ b/arch/arm/mach-ks8695/devices.c @@ -176,6 +176,27 @@ static void __init ks8695_add_device_watchdog(void) {} #endif +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +short ks8695_leds_cpu = -1; +short ks8695_leds_timer = -1; + +void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) +{ + /* Enable GPIO to access the LEDs */ + gpio_direction_output(cpu_led, 1); + gpio_direction_output(timer_led, 1); + + ks8695_leds_cpu = cpu_led; + ks8695_leds_timer = timer_led; +} +#else +void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + /* -------------------------------------------------------------------- */ /* diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c new file mode 100644 index 00000000000..d61762ae50d --- /dev/null +++ b/arch/arm/mach-ks8695/leds.c @@ -0,0 +1,94 @@ +/* + * LED driver for KS8695-based boards. + * + * Copyright (C) Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include +#include + + +static inline void ks8695_led_on(unsigned int led) +{ + gpio_set_value(led, 0); +} + +static inline void ks8695_led_off(unsigned int led) +{ + gpio_set_value(led, 1); +} + +static inline void ks8695_led_toggle(unsigned int led) +{ + unsigned long is_off = gpio_get_value(led); + if (is_off) + ks8695_led_on(led); + else + ks8695_led_off(led); +} + + +/* + * Handle LED events. + */ +static void ks8695_leds_event(led_event_t evt) +{ + unsigned long flags; + + local_irq_save(flags); + + switch(evt) { + case led_start: /* System startup */ + ks8695_led_on(ks8695_leds_cpu); + break; + + case led_stop: /* System stop / suspend */ + ks8695_led_off(ks8695_leds_cpu); + break; + +#ifdef CONFIG_LEDS_TIMER + case led_timer: /* Every 50 timer ticks */ + ks8695_led_toggle(ks8695_leds_timer); + break; +#endif + +#ifdef CONFIG_LEDS_CPU + case led_idle_start: /* Entering idle state */ + ks8695_led_off(ks8695_leds_cpu); + break; + + case led_idle_end: /* Exit idle state */ + ks8695_led_on(ks8695_leds_cpu); + break; +#endif + + default: + break; + } + + local_irq_restore(flags); +} + + +static int __init leds_init(void) +{ + if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1)) + return -ENODEV; + + leds_event = ks8695_leds_event; + + leds_event(led_start); + return 0; +} + +__initcall(leds_init); diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h index b0364dce463..7ad2c656e16 100644 --- a/include/asm-arm/arch-ks8695/devices.h +++ b/include/asm-arm/arch-ks8695/devices.h @@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan(void); extern void __init ks8695_add_device_lan(void); extern void __init ks8695_add_device_hpna(void); + /* LEDs */ +extern short ks8695_leds_cpu; +extern short ks8695_leds_timer; +extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); + /* PCI */ #define KS8695_MODE_PCI 0 #define KS8695_MODE_MINIPCI 1 -- cgit v1.2.3-70-g09d2 From d2db9aaa4a5b9f2a1d54080c13f5ff4fc6d0ae1b Mon Sep 17 00:00:00 2001 From: Robert Schwebel Date: Wed, 2 Apr 2008 10:29:30 +0100 Subject: [ARM] 4887/1: i.MXC family: Separate current platform code From: Juergen Beisert This patch separates the current code into i.MX2 and i.MX3 and modifies the Kconfig files to reflect this separation in the menus. Things happend since last review: - make i.MX3 compile again - fix some structure names to be conform with all the shared/common sources from i.MX1/i.MX2 Previous changes: - stay conform to other Kconfig files (note from Russell King) Signed-off-by: Juergen Beisert Signed-off-by: Russell King --- arch/arm/plat-mxc/Kconfig | 2 +- include/asm-arm/arch-mxc/hardware.h | 25 +++++-------------------- include/asm-arm/arch-mxc/irqs.h | 4 +++- include/asm-arm/arch-mxc/mx31.h | 30 +++++++++++++++++++++++++++++- include/asm-arm/arch-mxc/mxc.h | 5 +++++ 5 files changed, 43 insertions(+), 23 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 03a65c0dfb6..bb6e12738fb 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -4,7 +4,7 @@ menu "Freescale MXC Implementations" choice prompt "MXC/iMX System Type" - default 0 + default ARCH_MX3 config ARCH_MX3 bool "MX3-based" diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index e70387e91b7..e87ff0679d5 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -13,34 +13,19 @@ #include -#include +#ifdef CONFIG_ARCH_MX3 +# include +#endif #include -#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) - /* * --------------------------------------------------------------------------- * Board specific defines * --------------------------------------------------------------------------- */ -#define MXC_EXP_IO_BASE (MXC_GPIO_INT_BASE + MXC_MAX_GPIO_LINES) - -#include - -#ifndef MXC_MAX_EXP_IO_LINES -#define MXC_MAX_EXP_IO_LINES 0 +#ifdef CONFIG_MACH_MX31ADS +# include #endif -#define MXC_MAX_VIRTUAL_INTS 16 -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_INTS (MXC_MAX_INT_LINES + \ - MXC_MAX_GPIO_LINES + \ - MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index a64e66ba4ae..b2c5205e196 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -19,7 +19,9 @@ #define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) /* Number of normal interrupts */ -#define NR_IRQS MXC_MAX_INTS +#define NR_IRQS (MXC_MAX_INT_LINES + \ + MXC_MAX_GPIO_LINES + \ + MXC_MAX_VIRTUAL_INTS) /* Number of fast interrupts */ #define NR_FIQS MXC_MAX_INTS diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 85c49c9e5d1..36a1af495bb 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -317,6 +317,8 @@ #define MXC_MAX_INT_LINES 64 #define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES +#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) +#define MXC_MAX_VIRTUAL_INTS 16 /*! * Number of GPIO port as defined in the IC Spec @@ -329,7 +331,33 @@ #define PROD_SIGNATURE 0x1 /* For MX31 */ +/* silicon revisions specific to i.MX31 */ +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_1_2 0x12 +#define CHIP_REV_1_3 0x13 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_1 0x21 +#define CHIP_REV_2_2 0x22 +#define CHIP_REV_2_3 0x23 +#define CHIP_REV_3_0 0x30 +#define CHIP_REV_3_1 0x31 +#define CHIP_REV_3_2 0x32 + #define SYSTEM_REV_MIN CHIP_REV_1_0 #define SYSTEM_REV_NUM 3 -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +/* this is a i.MX31 CPU */ +#define cpu_is_mx31() (1) + +extern unsigned int system_rev; + +static inline int mx31_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index f1349734b8a..146d3f60951 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -15,6 +15,11 @@ #error "Do not include directly." #endif +/* clean up all things that are not used */ +#ifndef CONFIG_ARCH_MX3 +# define cpu_is_mx31() (0) +#endif + /* ***************************************** * GPT Register definitions * -- cgit v1.2.3-70-g09d2 From c63fc13f806b11576e8c41969d4b1598dd261d80 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 16 Apr 2008 00:04:19 +0100 Subject: [ARM] 4983/1: S3C2412: Add initial memory controller registers Add initial defines for the S3C2412's memory controller registers. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h new file mode 100644 index 00000000000..c8c793e7893 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2412_MEM +#define __ASM_ARM_REGS_S3C2412_MEM + +#ifndef S3C2412_MEMREG +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) +#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) +#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) +#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) +#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2412_MEM */ -- cgit v1.2.3-70-g09d2 From 1017be88d341c05adc8d790d8092781b7330dafd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 16 Apr 2008 00:08:36 +0100 Subject: [ARM] 4985/1: S3C2412: Fix ARMDIVN name in CLKDIVN definition. Fix the name of the S3C2412_CLKDIVN_ARMDIVN define. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2412/s3c2412.c | 2 +- include/asm-arm/arch-s3c2410/regs-clock.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index abf1599c9f9..98a0de924c2 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -175,7 +175,7 @@ void __init s3c2412_init_clocks(int xtal) /* work out clock scalings */ hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1); + hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); /* print brieft summary of clocks, etc */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index dba9df9d871..ecae9e7f5e4 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -137,7 +137,7 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2412_CLKDIVN_PDIVN (1<<2) #define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2421_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) #define S3C2412_CLKDIVN_DVSEN (1<<4) #define S3C2412_CLKDIVN_HALFHCLK (1<<5) #define S3C2412_CLKDIVN_USB48DIV (1<<6) -- cgit v1.2.3-70-g09d2 From 3c7d9c81e1302c244180e62999a08ca95b175cf5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 16 Apr 2008 00:15:20 +0100 Subject: [ARM] 4987/1: S3C24XX: Ensure watchdog reset initiated from cached code. There seems to be some problem with at-least the S3C2440 and bus traffic during an reset. It is unlikely, but still possible that the system will hang in such a way that the watchdog cannot get the system out of the state it is in. Change to making the code that calls the watchdog reset run from cached memory so that instruction fetches have quiesced before the watchdog fires. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/plat-s3c24xx/cpu.c | 27 ++++++++++++ include/asm-arm/arch-s3c2410/system-reset.h | 64 +++++++++++++++++++++++++++++ include/asm-arm/arch-s3c2410/system.h | 46 +-------------------- 3 files changed, 92 insertions(+), 45 deletions(-) create mode 100644 include/asm-arm/arch-s3c2410/system-reset.h (limited to 'include/asm-arm') diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index f513ab083b8..f5699cadb0c 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -28,15 +28,19 @@ #include #include #include +#include #include #include #include #include +#include #include #include +#include + #include #include @@ -203,6 +207,27 @@ static unsigned long s3c24xx_read_idcode_v4(void) #endif } +/* Hook for arm_pm_restart to ensure we execute the reset code + * with the caches enabled. It seems at least the S3C2440 has a problem + * resetting if there is bus activity interrupted by the reset. + */ +static void s3c24xx_pm_restart(char mode) +{ + if (mode != 's') { + unsigned long flags; + + local_irq_save(flags); + __cpuc_flush_kern_all(); + __cpuc_flush_user_all(); + + arch_reset(mode); + local_irq_restore(flags); + } + + /* fallback, or unhandled */ + arm_machine_restart(mode); +} + void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) { unsigned long idcode = 0x0; @@ -230,6 +255,8 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) panic("Unsupported S3C24XX CPU"); } + arm_pm_restart = s3c24xx_pm_restart; + (cpu->map_io)(mach_desc, size); } diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h new file mode 100644 index 00000000000..1615bce0c02 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/system-reset.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/arch-s3c2410/system-reset.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks + * + * S3C2410 - System define for arch_reset() function + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include + +#include +#include + +extern void (*s3c24xx_reset_hook)(void); + +static void +arch_reset(char mode) +{ + struct clk *wdtclk; + + if (mode == 's') { + cpu_reset(0); + } + + if (s3c24xx_reset_hook) + s3c24xx_reset_hook(); + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + + /* put initial values into count and data */ + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); +} diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 14de4e596f8..ad258085e53 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -17,12 +17,8 @@ #include #include -#include #include -#include -#include - void (*s3c24xx_idle)(void); void (*s3c24xx_reset_hook)(void); @@ -59,44 +55,4 @@ static void arch_idle(void) s3c24xx_default_idle(); } -static void -arch_reset(char mode) -{ - struct clk *wdtclk; - - if (mode == 's') { - cpu_reset(0); - } - - if (s3c24xx_reset_hook) - s3c24xx_reset_hook(); - - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - - /* we'll take a jump through zero as a poor second */ - cpu_reset(0); -} +#include -- cgit v1.2.3-70-g09d2 From de56a2f9228477866449963c2aff9df4728ea7fb Mon Sep 17 00:00:00 2001 From: Davide Rizzo Date: Sun, 30 Mar 2008 08:58:33 +0100 Subject: [ARM] 4883/1: Adds some missing gpio defines for S3C2410 This is a small addition of forgotten defines to regs-gpio.h include file for the Samsung S3C2410 ARM9 SoC Signed-off-by: Davide Rizzo Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-gpio.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 0ad75d716de..497dd06e2c9 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -529,11 +529,13 @@ #define S3C2410_GPD14_INP (0x00 << 28) #define S3C2410_GPD14_OUTP (0x01 << 28) #define S3C2410_GPD14_VD22 (0x02 << 28) +#define S3C2410_GPD14_nSS1 (0x03 << 28) #define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) #define S3C2410_GPD15_INP (0x00 << 30) #define S3C2410_GPD15_OUTP (0x01 << 30) #define S3C2410_GPD15_VD23 (0x02 << 30) +#define S3C2410_GPD15_nSS0 (0x03 << 30) #define S3C2410_GPD_PUPDIS(x) (1<<(x)) @@ -801,12 +803,14 @@ #define S3C2410_GPG2_INP (0x00 << 4) #define S3C2410_GPG2_OUTP (0x01 << 4) #define S3C2410_GPG2_EINT10 (0x02 << 4) +#define S3C2410_GPG2_nSS0 (0x03 << 4) #define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) #define S3C2410_GPG3_INP (0x00 << 6) #define S3C2410_GPG3_OUTP (0x01 << 6) #define S3C2410_GPG3_EINT11 (0x02 << 6) +#define S3C2410_GPG3_nSS1 (0x03 << 6) #define S3C2400_GPG3_I2SSDO (0x02 << 6) #define S3C2400_GPG3_I2SSDI (0x03 << 6) -- cgit v1.2.3-70-g09d2 From cbfc0f04069a426f3c8b4b35021117f6833df9ca Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 6 Mar 2008 16:22:00 +0100 Subject: [ARM] 4852/1: Add timerfd_create, timerfd_settime and timerfd_gettime syscall entries MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/calls.S | 4 +++- include/asm-arm/unistd.h | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 283e14fff99..95f1c121cb3 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -359,9 +359,11 @@ CALL(sys_kexec_load) CALL(sys_utimensat) CALL(sys_signalfd) -/* 350 */ CALL(sys_ni_syscall) +/* 350 */ CALL(sys_timerfd_create) CALL(sys_eventfd) CALL(sys_fallocate) + CALL(sys_timerfd_settime) + CALL(sys_timerfd_gettime) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index 88e868b7aae..7c570082b1e 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -376,9 +376,11 @@ #define __NR_kexec_load (__NR_SYSCALL_BASE+347) #define __NR_utimensat (__NR_SYSCALL_BASE+348) #define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd (__NR_SYSCALL_BASE+350) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) #define __NR_eventfd (__NR_SYSCALL_BASE+351) #define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) /* * The following SWIs are ARM private. -- cgit v1.2.3-70-g09d2 From dcc88a170ce9f90e4b819c67feebb16e8a123f79 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 13 Feb 2008 16:39:21 +0100 Subject: [ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUs Expose control of the PXA3xx 13MHz CLK_POUT pin via the clock API Signed-off-by: Mark Brown Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa3xx.c | 22 ++++++++++++++++++++++ include/asm-arm/arch-pxa/pxa3xx-regs.h | 9 +++++++++ 2 files changed, 31 insertions(+) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 35f25fdaeba..54c9e8371a2 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -156,6 +156,21 @@ static const struct clkops clk_pxa3xx_hsio_ops = { .getrate = clk_pxa3xx_hsio_getrate, }; +static void clk_pout_enable(struct clk *clk) +{ + OSCC |= OSCC_PEN; +} + +static void clk_pout_disable(struct clk *clk) +{ + OSCC &= ~OSCC_PEN; +} + +static const struct clkops clk_pout_ops = { + .enable = clk_pout_enable, + .disable = clk_pout_disable, +}; + #define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \ { \ .name = _name, \ @@ -175,6 +190,13 @@ static const struct clkops clk_pxa3xx_hsio_ops = { } static struct clk pxa3xx_clks[] = { + { + .name = "CLK_POUT", + .ops = &clk_pout_ops, + .rate = 13000000, + .delay = 70, + }, + PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 8e1b3ead827..fe9364c83a2 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -12,6 +12,15 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H + +/* + * Oscillator Configuration Register (OSCC) + */ +#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ + +#define OSCC_PEN (1 << 11) /* 13MHz POUT */ + + /* * Service Power Management Unit (MPMU) */ -- cgit v1.2.3-70-g09d2 From d72b1370b0b45f1fabda5ae4d603773d8a2c226a Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 16 Mar 2008 11:55:32 +0100 Subject: [ARM] 4868/1: Enhance pxa270 GPIO definitions Enhanced GPIO alternate functions descriptions, taken from Intel PXA270 Developers Manual. Signed-off-by: Robert Jarzmik Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 68 +++++++++++++++++++++++++++++-------- 1 file changed, 54 insertions(+), 14 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 2357a73340d..fd81e559f15 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1248,11 +1248,13 @@ #define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ #define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ #define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ #define GPIO13_MBGNT 13 /* memory controller grant */ #define GPIO14_MBREQ 14 /* alternate bus master request */ #define GPIO15_nCS_1 15 /* chip select 1 */ #define GPIO16_PWM0 16 /* PWM0 output */ #define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ #define GPIO18_RDY 18 /* Ext. Bus Ready */ #define GPIO19_DREQ1 19 /* External DMA Request */ #define GPIO20_DREQ0 20 /* External DMA Request */ @@ -1295,14 +1297,20 @@ #define GPIO48_nPOE 48 /* Output Enable for Card Space */ #define GPIO49_nPWE 49 /* Write Enable for Card Space */ #define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ #define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ #define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ #define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ #define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ #define GPIO54_MMCCLK 54 /* MMC Clock */ #define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ #define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ +#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ #define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ #define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ #define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ #define GPIO58_LDD_0 58 /* LCD data pin 0 */ @@ -1337,10 +1345,14 @@ #define GPIO79_nCS_3 79 /* chip select 3 */ #define GPIO80_nCS_4 80 /* chip select 4 */ #define GPIO81_NSCLK 81 /* NSSP clock */ +#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ #define GPIO82_NSFRM 82 /* NSSP Frame */ +#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ #define GPIO83_NSTXD 83 /* NSSP transmit */ #define GPIO84_NSRXD 84 /* NSSP receive */ +#define GPIO84_CIF_FV 84 /* Camera frame start signal */ #define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ +#define GPIO85_CIF_LV 85 /* Camera line start signal */ #define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ #define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ #define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ @@ -1376,11 +1388,13 @@ #define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) #define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) #define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) #define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) #define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) #define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) #define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) #define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) #define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) #define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) #define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) @@ -1400,11 +1414,12 @@ #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) #define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) +#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) #define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) #define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) #define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) #define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) #define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) #define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) #define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) @@ -1412,6 +1427,7 @@ #define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) #define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) #define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) #define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) #define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) @@ -1420,27 +1436,33 @@ #define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) #define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) +#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) #define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) #define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) #define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) #define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) #define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) #define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) #define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) #define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) #define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) #define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) #define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) #define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) #define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) #define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) #define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) @@ -1472,21 +1494,39 @@ #define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) #define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) #define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) #define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) +#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) +#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) +#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) +#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) +#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) +#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) +#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) +#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) +#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) +#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) +#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) +#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) +#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) +#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) +#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) +#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) #define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) +#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) +#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) #define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) +#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) +#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) +#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) +#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) +#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) #define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -- cgit v1.2.3-70-g09d2 From f6fb7af4768bc1ddc2349f6eaefedd746c8e4913 Mon Sep 17 00:00:00 2001 From: eric miao Date: Tue, 4 Mar 2008 13:53:05 +0800 Subject: [ARM] pxa: integrate low IRQ chip (ICIP) and high IRQ chip (ICIP2) into one This makes the code better organized and simplified a bit. The change will lose a bit of performance when performing IRQ ack/mask/unmask,but that's not too much after checking the result binary. This patch also removes the ugly #ifdef CONFIG_PXA27x .. #endif by carefully not to access those pxa{27x,3xx} specific registers, this is done by keeping an internal IRQ number variable. The pxa-regs.h is also modified so registers for IRQ > PXA_IRQ(31) are made public even if CONFIG_PXA{27x,3xx} isn't defined (for pxa25x's sake) The incorrect assumption in the original code that internal irq starts from 0 is also corrected by comparing with PXA_IRQ(0). "struct sys_device" for the IRQ are reduced into one single device on pxa{27x,3xx}. Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/generic.h | 3 +- arch/arm/mach-pxa/irq.c | 117 ++++++++++-------------------------- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 7 +-- arch/arm/mach-pxa/pxa3xx.c | 7 +-- include/asm-arm/arch-pxa/pxa-regs.h | 11 ++-- 6 files changed, 42 insertions(+), 105 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index cbe6693b1b6..0e3e058296f 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -12,8 +12,7 @@ struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq_low(void); -extern void __init pxa_init_irq_high(void); +extern void __init pxa_init_irq(int irq_nr); extern void __init pxa_init_irq_gpio(int gpio_nr); extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); extern void __init pxa_init_gpio_set_wake(int (*set_wake)(unsigned int, unsigned int)); diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index da3a44a4249..cccc3ed3c67 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -24,92 +24,57 @@ #include "generic.h" +#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) +#define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) +#define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) /* * This is for peripheral IRQs internal to the PXA chip. */ -static void pxa_mask_low_irq(unsigned int irq) +static int pxa_internal_irq_nr; + +static void pxa_mask_irq(unsigned int irq) { - ICMR &= ~(1 << irq); + _ICMR(irq) &= ~(1 << IRQ_BIT(irq)); } -static void pxa_unmask_low_irq(unsigned int irq) +static void pxa_unmask_irq(unsigned int irq) { - ICMR |= (1 << irq); + _ICMR(irq) |= 1 << IRQ_BIT(irq); } -static struct irq_chip pxa_internal_chip_low = { +static struct irq_chip pxa_internal_irq_chip = { .name = "SC", - .ack = pxa_mask_low_irq, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, + .ack = pxa_mask_irq, + .mask = pxa_mask_irq, + .unmask = pxa_unmask_irq, }; -void __init pxa_init_irq_low(void) +void __init pxa_init_irq(int irq_nr) { int irq; - /* disable all IRQs */ - ICMR = 0; + pxa_internal_irq_nr = irq_nr; - /* all IRQs are IRQ, not FIQ */ - ICLR = 0; + for (irq = 0; irq < irq_nr; irq += 32) { + _ICMR(irq) = 0; /* disable all IRQs */ + _ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */ + } /* only unmasked interrupts kick us out of idle */ ICCR = 1; - for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) { - set_irq_chip(irq, &pxa_internal_chip_low); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -} - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - -/* - * This is for the second set of internal IRQs as found on the PXA27x. - */ - -static void pxa_mask_high_irq(unsigned int irq) -{ - ICMR2 &= ~(1 << (irq - 32)); -} - -static void pxa_unmask_high_irq(unsigned int irq) -{ - ICMR2 |= (1 << (irq - 32)); -} - -static struct irq_chip pxa_internal_chip_high = { - .name = "SC-hi", - .ack = pxa_mask_high_irq, - .mask = pxa_mask_high_irq, - .unmask = pxa_unmask_high_irq, -}; - -void __init pxa_init_irq_high(void) -{ - int irq; - - ICMR2 = 0; - ICLR2 = 0; - - for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) { - set_irq_chip(irq, &pxa_internal_chip_high); + for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) { + set_irq_chip(irq, &pxa_internal_irq_chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } } -#endif void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) { - pxa_internal_chip_low.set_wake = set_wake; -#ifdef CONFIG_PXA27x - pxa_internal_chip_high.set_wake = set_wake; -#endif + pxa_internal_irq_chip.set_wake = set_wake; pxa_init_gpio_set_wake(set_wake); } @@ -118,19 +83,11 @@ static unsigned long saved_icmr[2]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { - switch (dev->id) { - case 0: - saved_icmr[0] = ICMR; - ICMR = 0; - break; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - case 1: - saved_icmr[1] = ICMR2; - ICMR2 = 0; - break; -#endif - default: - return -EINVAL; + int i, irq = PXA_IRQ(0); + + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { + saved_icmr[i] = _ICMR(irq); + _ICMR(irq) = 0; } return 0; @@ -138,22 +95,14 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) static int pxa_irq_resume(struct sys_device *dev) { - switch (dev->id) { - case 0: - ICMR = saved_icmr[0]; - ICLR = 0; - ICCR = 1; - break; -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - case 1: - ICMR2 = saved_icmr[1]; - ICLR2 = 0; - break; -#endif - default: - return -EINVAL; + int i, irq = PXA_IRQ(0); + + for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) { + _ICMR(irq) = saved_icmr[i]; + _ICLR(irq) = 0; } + ICCR = 1; return 0; } #else diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index f3799289b8f..bb0bf51f503 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -267,7 +267,7 @@ set_pwer: void __init pxa25x_init_irq(void) { - pxa_init_irq_low(); + pxa_init_irq(32); pxa_init_irq_gpio(85); pxa_init_irq_set_wake(pxa25x_set_wake); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c186bd1f867..54d8448cad7 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -340,8 +340,7 @@ set_pwer: void __init pxa27x_init_irq(void) { - pxa_init_irq_low(); - pxa_init_irq_high(); + pxa_init_irq(34); pxa_init_irq_gpio(128); pxa_init_irq_set_wake(pxa27x_set_wake); } @@ -389,10 +388,6 @@ static struct platform_device *devices[] __initdata = { static struct sys_device pxa27x_sysdev[] = { { - .id = 0, - .cls = &pxa_irq_sysclass, - }, { - .id = 1, .cls = &pxa_irq_sysclass, }, { .cls = &pxa_gpio_sysclass, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 93f3236b410..8f8179b2fc3 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -513,8 +513,7 @@ void __init pxa3xx_init_irq(void) value |= (1 << 6); __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); - pxa_init_irq_low(); - pxa_init_irq_high(); + pxa_init_irq(56); pxa_init_irq_gpio(128); pxa3xx_init_irq_pm(); } @@ -538,10 +537,6 @@ static struct platform_device *devices[] __initdata = { static struct sys_device pxa3xx_sysdev[] = { { - .id = 0, - .cls = &pxa_irq_sysclass, - }, { - .id = 1, .cls = &pxa_irq_sysclass, }, { .cls = &pxa_gpio_sysclass, diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index fd81e559f15..e659be4df3a 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1129,6 +1129,11 @@ #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ /* * General Purpose I/O @@ -1200,12 +1205,6 @@ /* Interrupt Controller */ -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -- cgit v1.2.3-70-g09d2 From a683b14df8f4320d0ef6cac93a6d9806173bf339 Mon Sep 17 00:00:00 2001 From: eric miao Date: Mon, 3 Mar 2008 09:44:25 +0800 Subject: [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h two reasons: 1. GPIO namings and their mode definitions are conceptually not part of the PXA register definitions 2. this is actually a temporary move in the transition of PXA2xx to use MFP-alike APIs (as what PXA3xx is now doing), so that legacy code will still work and new code can be added in step by step Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/clock.c | 1 + arch/arm/mach-pxa/cm-x270-pci.c | 1 + arch/arm/mach-pxa/cm-x270.c | 1 + arch/arm/mach-pxa/colibri.c | 1 + arch/arm/mach-pxa/corgi.c | 1 + arch/arm/mach-pxa/corgi_pm.c | 1 + arch/arm/mach-pxa/corgi_ssp.c | 1 + arch/arm/mach-pxa/em-x270.c | 1 + arch/arm/mach-pxa/gpio.c | 1 + arch/arm/mach-pxa/idp.c | 1 + arch/arm/mach-pxa/irq.c | 1 + arch/arm/mach-pxa/leds-trizeps4.c | 1 + arch/arm/mach-pxa/lpd270.c | 1 + arch/arm/mach-pxa/lubbock.c | 1 + arch/arm/mach-pxa/mainstone.c | 1 + arch/arm/mach-pxa/pcm027.c | 1 + arch/arm/mach-pxa/pcm990-baseboard.c | 1 + arch/arm/mach-pxa/poodle.c | 1 + arch/arm/mach-pxa/sharpsl_pm.c | 1 + arch/arm/mach-pxa/spitz.c | 1 + arch/arm/mach-pxa/spitz_pm.c | 1 + arch/arm/mach-pxa/tosa.c | 1 + arch/arm/mach-pxa/trizeps4.c | 1 + drivers/i2c/busses/i2c-pxa.c | 1 + drivers/input/keyboard/corgikbd.c | 1 + drivers/input/keyboard/spitzkbd.c | 1 + drivers/input/touchscreen/corgi_ts.c | 1 + drivers/net/irda/pxaficp_ir.c | 1 + drivers/pcmcia/pxa2xx_cm_x270.c | 1 + drivers/video/pxafb.c | 1 + include/asm-arm/arch-pxa/pxa-regs.h | 301 -------------------------------- include/asm-arm/arch-pxa/pxa2xx-gpio.h | 304 +++++++++++++++++++++++++++++++++ sound/arm/pxa2xx-ac97.c | 1 + sound/soc/pxa/pxa2xx-ac97.c | 1 + sound/soc/pxa/pxa2xx-i2s.c | 1 + 35 files changed, 337 insertions(+), 301 deletions(-) create mode 100644 include/asm-arm/arch-pxa/pxa2xx-gpio.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index df5ae2710ab..e97dc59813c 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -13,6 +13,7 @@ #include #include +#include #include #include "devices.h" diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index fcda7d5cb69..ac7f05f9f3e 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index ecdbc96a4de..6d4416a4f37 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c index 6db54e31c39..43bf5a183e9 100644 --- a/arch/arm/mach-pxa/colibri.c +++ b/arch/arm/mach-pxa/colibri.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 9292576b83b..259ca821e46 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 392c3871736..0a85f706e88 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 31706224a04..eccc45d21f7 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -21,6 +21,7 @@ #include #include +#include #include #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 3bb31314429..edc4f07a230 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c index f96cae04f6f..1a7057991da 100644 --- a/arch/arm/mach-pxa/gpio.c +++ b/arch/arm/mach-pxa/gpio.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "generic.h" diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 0a9434432c5..2637633f916 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -32,6 +32,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index fbff557bb22..a9a0c3fab15 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "generic.h" diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c index 2271d20ffed..21880daabaf 100644 --- a/arch/arm/mach-pxa/leds-trizeps4.c +++ b/arch/arm/mach-pxa/leds-trizeps4.c @@ -18,6 +18,7 @@ #include #include +#include #include #include "leds.h" diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index afa62ffe3ad..a20e4b1649d 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -39,6 +39,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e7ae4bb3e36..81567ec983a 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -42,6 +42,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 72a436fb9a2..75be0c74a64 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -40,6 +40,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index c14696b9979..3b945eb0aee 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 3dda16a2004..20b2974e396 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 209eabf0ed3..ca5ac196b47 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -32,6 +32,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index f9d1b61e118..34cd585075b 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include "sharpsl.h" diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 9e7773fca01..62a02c3927c 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -37,6 +37,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 745a4dc7acd..7a7f5f947cc 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "sharpsl.h" #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index f99112d50b4..d427d87b4fe 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f207fcd30cd..931885d86b9 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -41,6 +41,7 @@ #include #include +#include #include #include #include diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 2d2087ad708..6fd2d6a84ef 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -39,6 +39,7 @@ #include #include #include +#include struct pxa_i2c { spinlock_t lock; diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index 790fed368aa..5d6cc7f1dc9 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define KB_ROWS 8 diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 1d59a2dc3c1..0be74bfc58f 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c @@ -23,6 +23,7 @@ #include #include #include +#include #define KB_ROWS 7 #define KB_COLS 11 diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 99d92f5c93d..a22576779ac 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c @@ -22,6 +22,7 @@ #include #include #include +#include #define PWR_MODE_ACTIVE 0 diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 8c09344f58d..8239c520f1e 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -36,6 +36,7 @@ #include #include #include +#include #ifdef CONFIG_MACH_MAINSTONE #include diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c index fbf2f3a6984..e7ab060ff11 100644 --- a/drivers/pcmcia/pxa2xx_cm_x270.c +++ b/drivers/pcmcia/pxa2xx_cm_x270.c @@ -20,6 +20,7 @@ #include #include +#include #include #include "soc_common.h" diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 97facb121c7..757651954e6 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index e659be4df3a..e78adf8268e 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1236,307 +1236,6 @@ #endif - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO84_CIF_FV 84 /* Camera frame start signal */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO85_CIF_LV 85 /* Camera line start signal */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) -#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) -#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) -#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) -#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) -#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) -#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) -#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) -#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) -#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) -#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - /* * Power Manager */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h new file mode 100644 index 00000000000..fb418944753 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -0,0 +1,304 @@ +#ifndef __ASM_ARCH_PXA2XX_GPIO_H +#define __ASM_ARCH_PXA2XX_GPIO_H + +/* GPIO alternate function assignments */ + +#define GPIO1_RST 1 /* reset */ +#define GPIO6_MMCCLK 6 /* MMC Clock */ +#define GPIO7_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ +#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ +#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ +#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ +#define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ +#define GPIO13_MBGNT 13 /* memory controller grant */ +#define GPIO14_MBREQ 14 /* alternate bus master request */ +#define GPIO15_nCS_1 15 /* chip select 1 */ +#define GPIO16_PWM0 16 /* PWM0 output */ +#define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ +#define GPIO18_RDY 18 /* Ext. Bus Ready */ +#define GPIO19_DREQ1 19 /* External DMA Request */ +#define GPIO20_DREQ0 20 /* External DMA Request */ +#define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ +#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ +#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ +#define GPIO31_SYNC 31 /* AC97/I2S sync */ +#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO32_SYSCLK 32 /* I2S System Clock */ +#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ +#define GPIO33_nCS_5 33 /* chip select 5 */ +#define GPIO34_FFRXD 34 /* FFUART receive */ +#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ +#define GPIO35_FFCTS 35 /* FFUART Clear to send */ +#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ +#define GPIO37_FFDSR 37 /* FFUART data set ready */ +#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ +#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ +#define GPIO39_FFTXD 39 /* FFUART transmit data */ +#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ +#define GPIO41_FFRTS 41 /* FFUART request to send */ +#define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO42_HWRXD 42 /* HWUART receive data */ +#define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO43_HWTXD 43 /* HWUART transmit data */ +#define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO44_HWCTS 44 /* HWUART clear to send */ +#define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO45_HWRTS 45 /* HWUART request to send */ +#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ +#define GPIO46_ICPRXD 46 /* ICP receive data */ +#define GPIO46_STRXD 46 /* STD_UART receive data */ +#define GPIO47_ICPTXD 47 /* ICP transmit data */ +#define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO49_nPWE 49 /* Write Enable for Card Space */ +#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ +#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ +#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ +#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ +#define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ +#define GPIO54_MMCCLK 54 /* MMC Clock */ +#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ +#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ +#define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ +#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ +#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ +#define GPIO58_LDD_0 58 /* LCD data pin 0 */ +#define GPIO59_LDD_1 59 /* LCD data pin 1 */ +#define GPIO60_LDD_2 60 /* LCD data pin 2 */ +#define GPIO61_LDD_3 61 /* LCD data pin 3 */ +#define GPIO62_LDD_4 62 /* LCD data pin 4 */ +#define GPIO63_LDD_5 63 /* LCD data pin 5 */ +#define GPIO64_LDD_6 64 /* LCD data pin 6 */ +#define GPIO65_LDD_7 65 /* LCD data pin 7 */ +#define GPIO66_LDD_8 66 /* LCD data pin 8 */ +#define GPIO66_MBREQ 66 /* alternate bus master req */ +#define GPIO67_LDD_9 67 /* LCD data pin 9 */ +#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ +#define GPIO68_LDD_10 68 /* LCD data pin 10 */ +#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ +#define GPIO69_LDD_11 69 /* LCD data pin 11 */ +#define GPIO69_MMCCLK 69 /* MMC_CLK */ +#define GPIO70_LDD_12 70 /* LCD data pin 12 */ +#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ +#define GPIO71_LDD_13 71 /* LCD data pin 13 */ +#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ +#define GPIO72_LDD_14 72 /* LCD data pin 14 */ +#define GPIO72_32kHz 72 /* 32 kHz clock */ +#define GPIO73_LDD_15 73 /* LCD data pin 15 */ +#define GPIO73_MBGNT 73 /* Memory controller grant */ +#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ +#define GPIO75_LCD_LCLK 75 /* LCD line clock */ +#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ +#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ +#define GPIO78_nCS_2 78 /* chip select 2 */ +#define GPIO79_nCS_3 79 /* chip select 3 */ +#define GPIO80_nCS_4 80 /* chip select 4 */ +#define GPIO81_NSCLK 81 /* NSSP clock */ +#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ +#define GPIO82_NSFRM 82 /* NSSP Frame */ +#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ +#define GPIO83_NSTXD 83 /* NSSP transmit */ +#define GPIO84_NSRXD 84 /* NSSP receive */ +#define GPIO84_CIF_FV 84 /* Camera frame start signal */ +#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ +#define GPIO85_CIF_LV 85 /* Camera line start signal */ +#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ +#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ +#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ +#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ +#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ +#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ +#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ +#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ +#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ + +/* GPIO alternate function mode & direction */ + +#define GPIO_IN 0x000 +#define GPIO_OUT 0x080 +#define GPIO_ALT_FN_1_IN 0x100 +#define GPIO_ALT_FN_1_OUT 0x180 +#define GPIO_ALT_FN_2_IN 0x200 +#define GPIO_ALT_FN_2_OUT 0x280 +#define GPIO_ALT_FN_3_IN 0x300 +#define GPIO_ALT_FN_3_OUT 0x380 +#define GPIO_MD_MASK_NR 0x07f +#define GPIO_MD_MASK_DIR 0x080 +#define GPIO_MD_MASK_FN 0x300 +#define GPIO_DFLT_LOW 0x400 +#define GPIO_DFLT_HIGH 0x800 + +#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) +#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) +#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) +#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) +#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) +#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) +#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) +#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) +#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) +#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) +#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) +#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) +#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) +#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) +#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) +#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) +#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) +#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) +#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) +#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) +#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) +#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) +#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) +#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) +#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) +#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) +#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) +#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) +#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) +#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) +#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) +#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) +#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) +#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) +#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) +#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) +#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) +#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) +#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) +#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) +#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) +#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) +#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) +#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) +#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) +#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) +#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) +#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) +#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) +#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) +#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) +#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) +#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) +#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) +#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) +#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) +#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) +#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) +#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) +#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) +#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) +#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) +#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) +#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) +#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) +#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) +#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) +#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) +#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) +#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) +#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) +#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) +#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) +#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) +#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) +#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) +#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) +#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) +#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) +#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) +#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) +#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) +#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) +#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) +#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) +#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) +#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) +#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) +#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) +#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) +#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) +#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) +#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) +#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) +#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) +#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) +#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) +#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) +#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) +#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) + +#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index fd7bc865e67..8704e2825b1 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include "pxa2xx-pcm.h" diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 711b916e58a..fe9c297ae6f 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include "pxa2xx-pcm.h" diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 692b9000248..42507103097 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -25,6 +25,7 @@ #include #include +#include #include #include "pxa2xx-pcm.h" -- cgit v1.2.3-70-g09d2 From 7facc2f9374159795af2a3f8b3e682b4ee230643 Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 5 Mar 2008 17:16:29 +0800 Subject: [ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x} Pin configuration on pxa{25x,27x} has now separated from generic GPIO into dedicated mfp-pxa2xx.c by this patch. The name "mfp" is borrowed from pxa3xx and is used here to alert the difference between the two concepts: pin configuration and generic GPIOs. A GPIO can be called a "GPIO" _only_ when the corresponding pin is configured so. A pin configuration on pxa{25x,27x} is composed of: - alternate function selection (or pin mux as commonly called) - low power state or sleep state - wakeup enabling from low power mode The following MFP_xxx bit definitions in mfp.h are re-used: - MFP_PIN(x) - MFP_AFx - MFP_LPM_DRIVE_{LOW, HIGH} - MFP_LPM_EDGE_* Selecting alternate function on pxa{25x, 27x} involves configuration of GPIO direction register GPDRx, so a new bit and MFP_DIR_{IN, OUT} are introduced. And pin configurations are defined by the following two macros: - MFP_CFG_IN : for input alternate functions - MFP_CFG_OUT : for output alternate functions Every configuration should provide a low power state if it configured as output using MFP_CFG_OUT(). As a general guideline, the low power state should be decided to minimize the overall power dissipation. As an example, it is better to drive the pin as high level in low power mode if the GPIO is configured as an active low chip select. Pins configured as GPIO are defined by MFP_CFG_IN(). This is to avoid side effects when it is firstly configured as output. The actual direction of the GPIO is configured by gpio_direction_{input, output} Wakeup enabling on pxa{25x, 27x} is actually GPIO based wakeup, thus the device based enable_irq_wake() mechanism is not applicable here. E.g. invoking enable_irq_wake() with a GPIO IRQ as in the following code to enable OTG wakeup is by no means portable and intuitive, and it is valid _only_ when GPIO35 is configured as USB_P2_1: enable_irq_wake( gpio_to_irq(35) ); To make things worse, not every GPIO is able to wakeup the system. Only a small number of them can, on either rising or falling edge, or when level is high (for keypad GPIOs). Thus, another new bit is introduced to indicate that the GPIO will wakeup the system: - MFP_LPM_WAKEUP_ENABLE The following macros can be used in platform code, and be OR'ed to the GPIO configuration to enable its wakeup: - WAKEUP_ON_EDGE_{RISE, FALL, BOTH} - WAKEUP_ON_LEVEL_HIGH The WAKEUP_ON_LEVEL_HIGH is used for keypad GPIOs _only_, there is no edge settings for those GPIOs. These WAKEUP_ON_* flags OR'ed on wrong GPIOs will be ignored in case that platform code author is careless enough. The tradeoff here is that the wakeup source is fully determined by the platform configuration, instead of enable_irq_wake(). Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 4 +- arch/arm/mach-pxa/mfp-pxa2xx.c | 190 +++++++++++++++ include/asm-arm/arch-pxa/mfp-pxa25x.h | 161 +++++++++++++ include/asm-arm/arch-pxa/mfp-pxa27x.h | 431 ++++++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/mfp-pxa2xx.h | 131 +++++++++++ 5 files changed, 915 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-pxa/mfp-pxa2xx.c create mode 100644 include/asm-arm/arch-pxa/mfp-pxa25x.h create mode 100644 include/asm-arm/arch-pxa/mfp-pxa27x.h create mode 100644 include/asm-arm/arch-pxa/mfp-pxa2xx.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 10e0c0dce19..df2eb9fcf94 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -5,8 +5,8 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ time.o gpio.o -obj-$(CONFIG_PXA25x) += pxa25x.o -obj-$(CONFIG_PXA27x) += pxa27x.o +obj-$(CONFIG_PXA25x) += pxa25x.o mfp-pxa2xx.o +obj-$(CONFIG_PXA27x) += pxa27x.o mfp-pxa2xx.o obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp-pxa3xx.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c new file mode 100644 index 00000000000..f85f681c039 --- /dev/null +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -0,0 +1,190 @@ +/* + * linux/arch/arm/mach-pxa/mfp-pxa2xx.c + * + * PXA2xx pin mux configuration support + * + * The GPIOs on PXA2xx can be configured as one of many alternate + * functions, this is by concept samilar to the MFP configuration + * on PXA3xx, what's more important, the low power pin state and + * wakeup detection are also supported by the same framework. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3) + +#define PWER_WE35 (1 << 24) + +static struct { + unsigned valid : 1; + unsigned can_wakeup : 1; + unsigned keypad_gpio : 1; + unsigned int mask; /* bit mask in PWER or PKWR */ + unsigned long config; +} gpio_desc[MFP_PIN_GPIO127 + 1]; + +static inline int __mfp_config_gpio(unsigned gpio, unsigned long c) +{ + unsigned long gafr, mask = GPIO_bit(gpio); + int fn; + + fn = MFP_AF(c); + if (fn > 3) + return -EINVAL; + + /* alternate function and direction */ + gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2)); + GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2)); + + if (c & MFP_DIR_OUT) + GPDR(gpio) |= mask; + else + GPDR(gpio) &= ~mask; + + /* low power state */ + switch (c & MFP_LPM_STATE_MASK) { + case MFP_LPM_DRIVE_HIGH: + PGSR(gpio) |= mask; + break; + case MFP_LPM_DRIVE_LOW: + PGSR(gpio) &= ~mask; + break; + case MFP_LPM_INPUT: + break; + default: + pr_warning("%s: invalid low power state for GPIO%d\n", + __func__, gpio); + return -EINVAL; + } + + /* wakeup enabling */ + if ((c & MFP_LPM_WAKEUP_ENABLE) == 0) + return 0; + + if (!gpio_desc[gpio].can_wakeup || c & MFP_DIR_OUT) { + pr_warning("%s: GPIO%d unable to wakeup\n", + __func__, gpio); + return -EINVAL; + } + + if (gpio_desc[gpio].keypad_gpio) + PKWR |= gpio_desc[gpio].mask; + else { + PWER |= gpio_desc[gpio].mask; + + if (c & MFP_LPM_EDGE_RISE) + PRER |= gpio_desc[gpio].mask; + + if (c & MFP_LPM_EDGE_FALL) + PFER |= gpio_desc[gpio].mask; + } + + return 0; +} + +void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num) +{ + unsigned long flags; + unsigned long *c; + int i, gpio; + + for (i = 0, c = mfp_cfgs; i < num; i++, c++) { + + gpio = mfp_to_gpio(MFP_PIN(*c)); + + if (!gpio_desc[gpio].valid) { + pr_warning("%s: GPIO%d is invalid pin\n", + __func__, gpio); + continue; + } + + local_irq_save(flags); + + gpio_desc[gpio].config = *c; + __mfp_config_gpio(gpio, *c); + + local_irq_restore(flags); + } +} + +#ifdef CONFIG_PXA25x +static int __init pxa25x_mfp_init(void) +{ + int i; + + if (cpu_is_pxa25x()) { + for (i = 0; i <= 84; i++) + gpio_desc[i].valid = 1; + + for (i = 0; i <= 15; i++) { + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + } + + return 0; +} +postcore_initcall(pxa25x_mfp_init); +#endif /* CONFIG_PXA25x */ + +#ifdef CONFIG_PXA27x +static int pxa27x_pkwr_gpio[] __initdata = { + 13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94, + 95, 96, 97, 98, 99, 100, 101, 102 +}; + +static int __init pxa27x_mfp_init(void) +{ + int i, gpio; + + if (cpu_is_pxa27x()) { + for (i = 0; i <= 120; i++) { + /* skip GPIO2, 5, 6, 7, 8, they are not + * valid pins allow configuration + */ + if (i == 2 || i == 5 || i == 6 || + i == 7 || i == 8) + continue; + + gpio_desc[i].valid = 1; + } + + /* Keypad GPIOs */ + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + gpio = pxa27x_pkwr_gpio[i]; + gpio_desc[gpio].can_wakeup = 1; + gpio_desc[gpio].keypad_gpio = 1; + gpio_desc[gpio].mask = 1 << i; + } + + /* Overwrite GPIO13 as a PWER wakeup source */ + for (i = 0; i <= 15; i++) { + /* skip GPIO2, 5, 6, 7, 8 */ + if (GPIO_bit(i) & 0x1e4) + continue; + + gpio_desc[i].can_wakeup = 1; + gpio_desc[i].mask = GPIO_bit(i); + } + + gpio_desc[35].can_wakeup = 1; + gpio_desc[35].mask = PWER_WE35; + } + + return 0; +} +postcore_initcall(pxa27x_mfp_init); +#endif /* CONFIG_PXA27x */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h new file mode 100644 index 00000000000..0499323010b --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa25x.h @@ -0,0 +1,161 @@ +#ifndef __ASM_ARCH_MFP_PXA25X_H +#define __ASM_ARCH_MFP_PXA25X_H + +#include +#include + +/* GPIO */ +#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) + +#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1) + +/* Crystal and Clock Signals */ +#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) +#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) +#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) +#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) +#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW) +#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW) +#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1) +#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1) + +/* PC CARD */ +#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH) +#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) + +/* FFUART */ +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) + +/* BTUART */ +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* HWUART */ +#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3) +#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH) +#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH) +#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH) +#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1) +#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1 */ +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) + +/* AC97 */ +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1) + +/* SSP 2 - NSSP */ +#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1) +#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW) +#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1) +#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW) +#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW) +#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2) + +/* MMC */ +#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW) +#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW) +#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW) +#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW) +#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW) +#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW) +#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) + +#endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h new file mode 100644 index 00000000000..65dfaa9109f --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h @@ -0,0 +1,431 @@ +#ifndef __ASM_ARCH_MFP_PXA27X_H +#define __ASM_ARCH_MFP_PXA27X_H + +/* + * NOTE: for those special-function bidirectional GPIOs, as described + * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input + * alternative is preserved, the direction is actually selected by the + * specific controller, and this should work in most cases. + */ + +#include +#include + +/* GPIO */ +#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0) + +/* Crystal and Clock Signals */ +#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW) +#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW) +#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1) + +/* OS Timer Signals */ +#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1) +#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1) +#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW) +#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW) +#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH) +#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH) +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH) +#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH) +#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH) +#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH) +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1) +#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1) +#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2) +#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2) +#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2) +#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2) +#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2) +#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3) +#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW) +#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW) +#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW) +#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW) + +/* PC CARD */ +#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH) +#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH) +#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH) +#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH) +#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) +#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH) +#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) + +/* I2C */ +#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) +#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1) + +/* FFUART */ +#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3) +#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3) +#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3) +#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3) +#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1) +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1) +#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1) +#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1) +#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3) +#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3) +#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH) +#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH) +#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH) +#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH) +#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH) + +/* BTUART */ +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2) +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1/2/3 */ +#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW) +#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW) +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) +#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW) +#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW) +#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW) +#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW) +#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW) +#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW) + +/* AC97 */ +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW) +#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW) +#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW) +#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW) +#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW) +#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW) +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2) +#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) +#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) +#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2) +#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) + +/* SSP 2 */ +#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1) +#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3) +#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW) +#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2) +#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3) +#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW) +#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2) +#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2) +#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW) +#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3) +#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW) +#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW) +#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW) +#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW) +#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2) +#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW) +#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1) +#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1) +#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2) +#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1) +#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) +#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2) +#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2) + +/* SSP 3 */ +#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3) +#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW) +#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2) +#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1) +#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW) +#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3) +#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3) +#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1) +#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW) +#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW) +#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3) +#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1) +#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1) + +/* MMC */ +#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW) +#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1) +#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1) +#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1) +#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1) +#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW) +#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) +#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1) +#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW) + +/* Keypad */ +#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1) +#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1) +#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1) +#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1) +#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1) +#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1) +#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1) +#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2) +#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1) +#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1) +#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1) +#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2) +#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3) +#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3) +#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3) +#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2) +#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1) +#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1) +#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1) +#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3) +#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1) +#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1) +#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3) +#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3) +#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3) +#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH) +#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH) +#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH) +#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH) +#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH) +#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH) +#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH) +#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH) +#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH) +#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH) +#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH) + +/* USB P3 */ +#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3) +#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3) +#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) +#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) +#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW) +#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3) +#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3) +#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2) +#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2) +#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3) + +/* USB P2 */ +#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW) +#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2) +#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW) +#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW) +#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3) +#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3) +#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2) +#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2) + +/* USB Host Port 1/2 */ +#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1) +#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW) +#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1) +#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW) + +/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */ +#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2) +#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1) +#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2) +#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2) +#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW) +#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1) +#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1) +#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2) +#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3) +#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW) +#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3) +#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3) +#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1) +#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1) +#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1) +#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1) +#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW) +#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3) +#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1) +#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2) +#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3) +#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3) +#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3) +#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3) +#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3) +#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3) +#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2) +#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2) +#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2) +#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2) +#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1) +#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1) +#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1) +#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1) +#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1) +#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1) +#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1) + +/* Universal Subscriber ID Interface */ +#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW) +#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW) +#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW) +#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW) +#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW) +#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW) +#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW) +#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3) +#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW) +#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW) + +/* Mobile Scalable Link (MSL) Interface */ +#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW) +#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW) +#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW) +#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW) +#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW) +#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2) +#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2) +#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2) +#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2) +#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2) +#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2) +#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW) + +/* Memory Stick Host Controller */ +#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW) +#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2) +#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) +#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +#endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h new file mode 100644 index 00000000000..bec6acfcc8c --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h @@ -0,0 +1,131 @@ +#ifndef __ASM_ARCH_MFP_PXA2XX_H +#define __ASM_ARCH_MFP_PXA2XX_H + +#include + +/* + * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: + * + * MFP_PIN(x) + * MFP_AFx + * MFP_LPM_DRIVE_{LOW, HIGH} + * MFP_LPM_EDGE_x + * + * other MFP_x bit definitions will be ignored + * + * and adds the below two bits specifically for pxa2xx: + * + * bit 23 - Input/Output (PXA2xx specific) + * bit 24 - Wakeup Enable(PXA2xx specific) + */ + +#define MFP_DIR_IN (0x0 << 23) +#define MFP_DIR_OUT (0x1 << 23) +#define MFP_DIR_MASK (0x1 << 23) +#define MFP_DIR(x) (((x) >> 23) & 0x1) + +#define MFP_LPM_WAKEUP_ENABLE (0x1 << 24) +#define WAKEUP_ON_EDGE_RISE (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_RISE) +#define WAKEUP_ON_EDGE_FALL (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_FALL) +#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_BOTH) + +/* specifically for enabling wakeup on keypad GPIOs */ +#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_WAKEUP_ENABLE) + +#define MFP_CFG_IN(pin, af) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN)) + +/* NOTE: pins configured as output _must_ provide a low power state, + * and this state should help to minimize the power dissipation. + */ +#define MFP_CFG_OUT(pin, af, state) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) + +/* Common configurations for pxa25x and pxa27x + * + * Note: pins configured as GPIO are always initialized to input + * so not to cause any side effect + */ +#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0) +#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0) +#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0) +#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0) +#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0) +#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0) +#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0) +#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0) +#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0) +#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) + +extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +#endif /* __ASM_ARCH_MFP_PXA2XX_H */ -- cgit v1.2.3-70-g09d2 From c0a596d6a138ea281bed4ff3018c07c45dd245a2 Mon Sep 17 00:00:00 2001 From: eric miao Date: Tue, 11 Mar 2008 09:46:28 +0800 Subject: [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} Changes include: 1. rename MFP_LPM_WAKEUP_ENABLE into MFP_LPM_CAN_WAKEUP to indicate the board capability of this pin to wakeup the system 2. add gpio_set_wake() and keypad_set_wake() to allow dynamically enable/disable wakeup from GPIOs and keypad GPIO * these functions are currently kept in mfp-pxa2xx.c due to their dependency to the MFP configuration 3. pxa2xx_mfp_config() only gives early warning if MFP_LPM_CAN_WAKEUP is set on incorrect pins So that the GPIO's wakeup capability is now decided by the following: a) processor's capability: (only those GPIOs which have dedicated bits within PWER/PRER/PFER can wakeup the system), this is initialized by pxa{25x,27x}_init_mfp() b) board design decides: - whether the pin is designed to wakeup the system (some of the GPIOs are configured as other functions, which is not intended to be a wakeup source), by OR'ing the pin config with MFP_LPM_CAN_WAKEUP - which edge the pin is designed to wakeup the system, this may depends on external peripherals/connections, which is totally board specific; this is indicated by MFP_LPM_EDGE_* c) the corresponding device's (most likely the gpio_keys.c) wakeup attribute: Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/mfp-pxa2xx.c | 93 ++++++++++++++++++++++++++++------- arch/arm/mach-pxa/pxa25x.c | 23 ++------- arch/arm/mach-pxa/pxa27x.c | 31 ++---------- include/asm-arm/arch-pxa/mfp-pxa27x.h | 1 + include/asm-arm/arch-pxa/mfp-pxa2xx.h | 11 +++-- 5 files changed, 91 insertions(+), 68 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index f85f681c039..22097a1707c 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -28,15 +28,17 @@ #define PWER_WE35 (1 << 24) -static struct { +struct gpio_desc { unsigned valid : 1; unsigned can_wakeup : 1; unsigned keypad_gpio : 1; unsigned int mask; /* bit mask in PWER or PKWR */ unsigned long config; -} gpio_desc[MFP_PIN_GPIO127 + 1]; +}; + +static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1]; -static inline int __mfp_config_gpio(unsigned gpio, unsigned long c) +static int __mfp_config_gpio(unsigned gpio, unsigned long c) { unsigned long gafr, mask = GPIO_bit(gpio); int fn; @@ -70,26 +72,19 @@ static inline int __mfp_config_gpio(unsigned gpio, unsigned long c) return -EINVAL; } - /* wakeup enabling */ - if ((c & MFP_LPM_WAKEUP_ENABLE) == 0) - return 0; - - if (!gpio_desc[gpio].can_wakeup || c & MFP_DIR_OUT) { + /* give early warning if MFP_LPM_CAN_WAKEUP is set on the + * configurations of those pins not able to wakeup + */ + if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) { pr_warning("%s: GPIO%d unable to wakeup\n", __func__, gpio); return -EINVAL; } - if (gpio_desc[gpio].keypad_gpio) - PKWR |= gpio_desc[gpio].mask; - else { - PWER |= gpio_desc[gpio].mask; - - if (c & MFP_LPM_EDGE_RISE) - PRER |= gpio_desc[gpio].mask; - - if (c & MFP_LPM_EDGE_FALL) - PFER |= gpio_desc[gpio].mask; + if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) { + pr_warning("%s: output GPIO%d unable to wakeup\n", + __func__, gpio); + return -EINVAL; } return 0; @@ -120,6 +115,45 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num) } } +int gpio_set_wake(unsigned int gpio, unsigned int on) +{ + struct gpio_desc *d; + unsigned long c; + + if (gpio > mfp_to_gpio(MFP_PIN_GPIO127)) + return -EINVAL; + + d = &gpio_desc[gpio]; + c = d->config; + + if (!d->valid) + return -EINVAL; + + if (d->keypad_gpio) + return -EINVAL; + + if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) { + if (on) { + PWER |= d->mask; + + if (c & MFP_LPM_EDGE_RISE) + PRER |= d->mask; + else + PRER &= ~d->mask; + + if (c & MFP_LPM_EDGE_FALL) + PFER |= d->mask; + else + PFER &= ~d->mask; + } else { + PWER &= ~d->mask; + PRER &= ~d->mask; + PFER &= ~d->mask; + } + } + return 0; +} + #ifdef CONFIG_PXA25x static int __init pxa25x_mfp_init(void) { @@ -141,11 +175,32 @@ postcore_initcall(pxa25x_mfp_init); #endif /* CONFIG_PXA25x */ #ifdef CONFIG_PXA27x -static int pxa27x_pkwr_gpio[] __initdata = { +static int pxa27x_pkwr_gpio[] = { 13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102 }; +int keypad_set_wake(unsigned int on) +{ + unsigned int i, gpio, mask = 0; + + if (!on) { + PKWR = 0; + return 0; + } + + for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) { + + gpio = pxa27x_pkwr_gpio[i]; + + if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP) + mask |= gpio_desc[gpio].mask; + } + + PKWR = mask; + return 0; +} + static int __init pxa27x_mfp_init(void) { int i, gpio; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 653a3b63d07..c486c3055cf 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -230,24 +231,10 @@ static inline void pxa25x_init_pm(void) {} static int pxa25x_set_wake(unsigned int irq, unsigned int on) { int gpio = IRQ_TO_GPIO(irq); - uint32_t gpio_bit, mask = 0; - - if (gpio >= 0 && gpio <= 15) { - gpio_bit = GPIO_bit(gpio); - mask = gpio_bit; - if (on) { - if (GRER(gpio) | gpio_bit) - PRER |= gpio_bit; - else - PRER &= ~gpio_bit; - - if (GFER(gpio) | gpio_bit) - PFER |= gpio_bit; - else - PFER &= ~gpio_bit; - } - goto set_pwer; - } + uint32_t mask = 0; + + if (gpio >= 0 && gpio < 85) + return gpio_set_wake(gpio, on); if (irq == IRQ_RTCAlrm) { mask = PWER_RTC; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 87ade40865f..b230af22ae0 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -286,37 +287,16 @@ static inline void pxa27x_init_pm(void) {} /* PXA27x: Various gpios can issue wakeup events. This logic only * handles the simple cases, not the WEMUX2 and WEMUX3 options */ -#define PXA27x_GPIO_NOWAKE_MASK \ - ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) -#define WAKEMASK(gpio) \ - (((gpio) <= 15) \ - ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ - : ((gpio == 35) ? (1 << 24) : 0)) - static int pxa27x_set_wake(unsigned int irq, unsigned int on) { int gpio = IRQ_TO_GPIO(irq); uint32_t mask; - if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) { - if (WAKEMASK(gpio) == 0) - return -EINVAL; - - mask = WAKEMASK(gpio); - - if (on) { - if (GRER(gpio) | GPIO_bit(gpio)) - PRER |= mask; - else - PRER &= ~mask; + if (gpio >= 0 && gpio < 128) + return gpio_set_wake(gpio, on); - if (GFER(gpio) | GPIO_bit(gpio)) - PFER |= mask; - else - PFER &= ~mask; - } - goto set_pwer; - } + if (irq == IRQ_KEYPAD) + return keypad_set_wake(on); switch (irq) { case IRQ_RTCAlrm: @@ -329,7 +309,6 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on) return -EINVAL; } -set_pwer: if (on) PWER |= mask; else diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h index 65dfaa9109f..eb6eaa174f8 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa27x.h +++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h @@ -428,4 +428,5 @@ #define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) #define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) +extern int keypad_set_wake(unsigned int on); #endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h index bec6acfcc8c..db8d890d237 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h +++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h @@ -24,13 +24,13 @@ #define MFP_DIR_MASK (0x1 << 23) #define MFP_DIR(x) (((x) >> 23) & 0x1) -#define MFP_LPM_WAKEUP_ENABLE (0x1 << 24) -#define WAKEUP_ON_EDGE_RISE (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_RISE) -#define WAKEUP_ON_EDGE_FALL (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_FALL) -#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_BOTH) +#define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) +#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) +#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) /* specifically for enabling wakeup on keypad GPIOs */ -#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_WAKEUP_ENABLE) +#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP) #define MFP_CFG_IN(pin, af) \ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ @@ -128,4 +128,5 @@ #define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +extern int gpio_set_wake(unsigned int gpio, unsigned int on); #endif /* __ASM_ARCH_MFP_PXA2XX_H */ -- cgit v1.2.3-70-g09d2 From 37320980414f5a7654ee08a047194224c6bba46e Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 23 Jan 2008 13:39:13 +0800 Subject: [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() also update the clk definitions in pxa27x and pxa3xx. Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/devices.c | 26 ++++++++++++++++++++++++++ arch/arm/mach-pxa/devices.h | 1 + arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 1 + include/asm-arm/arch-pxa/pxa27x_keypad.h | 2 ++ 5 files changed, 31 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index bfccb80ac8e..3665e242f1f 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "devices.h" @@ -396,6 +397,31 @@ struct platform_device pxa25x_device_assp = { #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) +static struct resource pxa27x_resource_keypad[] = { + [0] = { + .start = 0x41500000, + .end = 0x4150004c, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_KEYPAD, + .end = IRQ_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa27x_device_keypad = { + .name = "pxa27x-keypad", + .id = -1, + .resource = pxa27x_resource_keypad, + .num_resources = ARRAY_SIZE(pxa27x_resource_keypad), +}; + +void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info) +{ + pxa_register_device(&pxa27x_device_keypad, info); +} + static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32); static struct resource pxa27x_resource_ohci[] = { diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 96c7c890906..fcab017f27e 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -14,6 +14,7 @@ extern struct platform_device pxa_device_rtc; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; +extern struct platform_device pxa27x_device_keypad; extern struct platform_device pxa25x_device_ssp; extern struct platform_device pxa25x_device_nssp; diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index b230af22ae0..f910fe57fcc 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -152,7 +152,7 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev), INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), - INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), + INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 85b1df3f69c..dc8d5ee9f28 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -233,6 +233,7 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), PXA3xx_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev), + PXA3xx_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h index 644f7609b52..d5a48a96dea 100644 --- a/include/asm-arm/arch-pxa/pxa27x_keypad.h +++ b/include/asm-arm/arch-pxa/pxa27x_keypad.h @@ -53,4 +53,6 @@ struct pxa27x_keypad_platform_data { #define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) +extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); + #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ -- cgit v1.2.3-70-g09d2 From 4354e188121d92c28647146b70a8c303b46a7dcd Mon Sep 17 00:00:00 2001 From: eric miao Date: Fri, 22 Feb 2008 13:48:15 +0800 Subject: [ARM] pxa: remove keypad register definitions from pxa-regs.h Keypad registers are now fully defined within pxa27x-keypad.c, no need to keep those definitions in pxa-regs.h Signed-off-by: eric miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 56 ------------------------------------- 1 file changed, 56 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index e78adf8268e..c28c5eaf04a 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1604,62 +1604,6 @@ #ifdef CONFIG_PXA27x -/* - * Keypad - */ -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ -#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ -#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) - /* Camera Interface */ #define CICR0 __REG(0x50000000) #define CICR1 __REG(0x50000004) -- cgit v1.2.3-70-g09d2 From 90b8fc34968d3f6c70e309d97597682f119220b9 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sat, 15 Mar 2008 05:11:07 +0100 Subject: [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: Jaya Kumar Signed-off-by: Russell King --- MAINTAINERS | 6 + arch/arm/configs/am200epdkit_defconfig | 1149 ++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/Kconfig | 20 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/gumstix.c | 147 ++++ include/asm-arm/arch-pxa/gumstix.h | 96 +++ 6 files changed, 1419 insertions(+) create mode 100644 arch/arm/configs/am200epdkit_defconfig create mode 100644 arch/arm/mach-pxa/gumstix.c create mode 100644 include/asm-arm/arch-pxa/gumstix.h (limited to 'include/asm-arm') diff --git a/MAINTAINERS b/MAINTAINERS index 73883b8bbd7..d1c7be38b10 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -480,6 +480,12 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/GUMSTIX MACHINE SUPPORT +P: Steve Sakoman +M: sakoman@gmail.com +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/HP JORNADA 7XX MACHINE SUPPORT P: Kristoffer Ericson M: kristoffer.ericson@gmail.com diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig new file mode 100644 index 00000000000..dc030cfe500 --- /dev/null +++ b/arch/arm/configs/am200epdkit_defconfig @@ -0,0 +1,1149 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc3 +# Sun Mar 9 06:33:33 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="gum" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +CONFIG_ARCH_GUMSTIX=y +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_MACH_GUMSTIX_F=y +CONFIG_PXA25x=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +# CONFIG_PCMCIA_IOCTL is not set + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_IEEE80211_SOFTMAC is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m +CONFIG_IDE_MAX_HWIFS=2 +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=m +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_AX88796 is not set +CONFIG_SMC91X=m +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SA1100_WATCHDOG=m + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_PARAMETERS=y +CONFIG_FB_MBX=m +CONFIG_FB_VIRTUAL=m +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 0908bea0f60..5da7a682049 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -23,6 +23,12 @@ endif choice prompt "Select target board" +config ARCH_GUMSTIX + bool "Gumstix XScale boards" + help + Say Y here if you intend to run this kernel on a + Gumstix Full Function Minature Computer. + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -160,6 +166,20 @@ endchoice endif +if ARCH_GUMSTIX + +choice + prompt "Select target Gumstix board" + +config MACH_GUMSTIX_F + bool "Basix, Connex, ws-200ax, ws-400ax systems" + select PXA25x + +endchoice + +endif + + if MACH_TRIZEPS4 choice diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index df2eb9fcf94..7cdcb459ea9 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o # Specific board support +obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c new file mode 100644 index 00000000000..f01d1854413 --- /dev/null +++ b/arch/arm/mach-pxa/gumstix.c @@ -0,0 +1,147 @@ +/* + * linux/arch/arm/mach-pxa/gumstix.c + * + * Support for the Gumstix motherboards. + * + * Original Author: Craig Hughes + * Created: Feb 14, 2008 + * Copyright: Craig Hughes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Implemented based on lubbock.c by Nicolas Pitre and code from Craig + * Hughes + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "generic.h" + +static struct resource flash_resource = { + .start = 0x00000000, + .end = SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition gumstix_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + } , { + .name = "rootfs", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND + } +}; + +static struct flash_platform_data gumstix_flash_data = { + .map_name = "cfi_probe", + .parts = gumstix_partitions, + .nr_parts = ARRAY_SIZE(gumstix_partitions), + .width = 2, +}; + +static struct platform_device gumstix_flash_device = { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &gumstix_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +static struct platform_device *devices[] __initdata = { + &gumstix_flash_device, +}; + +#ifdef CONFIG_MMC_PXA +static struct pxamci_platform_data gumstix_mci_platform_data; + +static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int, + void *data) +{ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO53_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + + return 0; +} + +static struct pxamci_platform_data gumstix_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = gumstix_mci_init, +}; + +static void __init gumstix_mmc_init(void) +{ + pxa_set_mci_info(&gumstix_mci_platform_data); +} +#else +static void __init gumstix_mmc_init(void) +{ + printk(KERN_INFO "Gumstix mmc disabled\n"); +} +#endif + +#ifdef CONFIG_USB_GADGET_PXA2XX +static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = { + .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn, + .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx, +}; + +static void __init gumstix_udc_init(void) +{ + pxa_set_udc_info(&gumstix_udc_info); +} +#else +static void gumstix_udc_init(void) +{ + printk(KERN_INFO "Gumstix udc is disabled\n"); +} +#endif + +static void __init gumstix_init(void) +{ + gumstix_udc_init(); + gumstix_mmc_init(); + (void) platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(GUMSTIX, "Gumstix") + .phys_io = 0x40000000, + .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = gumstix_init, +MACHINE_END diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h new file mode 100644 index 00000000000..6fa85c4f94f --- /dev/null +++ b/include/asm-arm/arch-pxa/gumstix.h @@ -0,0 +1,96 @@ +/* + * linux/include/asm-arm/arch-pxa/gumstix.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* BTRESET - Reset line to Bluetooth module, active low signal. */ +#define GPIO_GUMSTIX_BTRESET 7 +#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) + + +/* +GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean +interrupt signal for determining cable presence. On the original gumstix, +this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +this moves to GPIO17 and GPIO37. */ + +/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn +has detected a cable insertion; driven low otherwise. */ + +#ifdef CONFIG_ARCH_GUMSTIX_ORIG + +#define GPIO_GUMSTIX_USB_GPIOn 81 +#define GPIO_GUMSTIX_USB_GPIOx 83 + +#else + +#define GPIO_GUMSTIX_USB_GPIOn 35 +#define GPIO_GUMSTIX_USB_GPIOx 41 + +#endif + +/* usb state change */ +#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) + +#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) +#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) +#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) + +/* + * SD/MMC definitions + */ +#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ +#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ +#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) + +/* + * SMC Ethernet definitions + * ETH_RST provides a hardware reset line to the ethernet chip + * ETH is the IRQ line in from the ethernet chip to the PXA + */ +#define GPIO_GUMSTIX_ETH0_RST 80 +#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) +#define GPIO_GUMSTIX_ETH1_RST 52 +#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) + +#define GPIO_GUMSTIX_ETH0 36 +#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) +#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GPIO_GUMSTIX_ETH1 27 +#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) +#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) + + +/* CF reset line */ +#define GPIO8_RESET 8 + +/* CF slot 0 */ +#define GPIO4_nBVD1 4 +#define GPIO4_nSTSCHG GPIO4_nBVD1 +#define GPIO11_nCD 11 +#define GPIO26_PRDY_nBSY 26 +#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) + +/* CF slot 1 */ +#define GPIO18_nBVD1 18 +#define GPIO18_nSTSCHG GPIO18_nBVD1 +#define GPIO36_nCD 36 +#define GPIO27_PRDY_nBSY 27 +#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) + +/* CF GPIO line modes */ +#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) +#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) +#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) +#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) +#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) +#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) +#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) -- cgit v1.2.3-70-g09d2 From 103a1754894eecf488103f7739061e7e767049ad Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 9 Apr 2008 19:11:52 +0100 Subject: [ARM] 4943/2: magician: fix magician.h GPIO header includes PXA GPIO definitions were split from pxa-regs.h into pxa2xx-gpio.h. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- include/asm-arm/arch-pxa/magician.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h index 337f51f06b3..13762e80bf5 100644 --- a/include/asm-arm/arch-pxa/magician.h +++ b/include/asm-arm/arch-pxa/magician.h @@ -12,7 +12,7 @@ #ifndef _MAGICIAN_H_ #define _MAGICIAN_H_ -#include +#include /* * PXA GPIOs -- cgit v1.2.3-70-g09d2 From 70e357f8426c54e1500ac4fdb6b1172df16d8b93 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 9 Apr 2008 19:22:57 +0100 Subject: [ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD needed for power management (audio, BT, charging, GSM, LCD, SD), GSM, flash and SD operation and audio routing. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- arch/arm/configs/magician_defconfig | 1 + arch/arm/mach-pxa/magician.c | 60 ++++++++++++++++++++++++++++++++++++- include/asm-arm/arch-pxa/irqs.h | 3 +- include/asm-arm/arch-pxa/magician.h | 53 ++++++++++++++++++++++++++++++++ 4 files changed, 115 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 703d741f5a2..76960c71d89 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -712,6 +712,7 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +CONFIG_HTC_EGPIO=y # # Multimedia devices diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 0160cd8f6c6..3b7e8bac734 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -84,6 +85,62 @@ static struct platform_device gpio_keys = { .id = -1, }; + +/* + * EGPIO (Xilinx CPLD) + * + * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + */ + +static struct resource egpio_resources[] = { + [0] = { + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct htc_egpio_chip egpio_chips[] = { + [0] = { + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + }, + [1] = { + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, + }, +}; + +static struct htc_egpio_platform_data egpio_info = { + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), +}; + +static struct platform_device egpio = { + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), + .dev = { + .platform_data = &egpio_info, + }, +}; + /* * LCD - Toppoly TD028STEB1 */ @@ -182,8 +239,8 @@ static struct physmap_flash_data strataflash_data = { static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .num_resources = 1, .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, @@ -195,6 +252,7 @@ static struct platform_device strataflash = { static struct platform_device *devices[] __initdata = { &gpio_keys, + &egpio, &backlight, &strataflash, }; diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index c562b972a4a..50c77eacbd5 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -181,7 +181,8 @@ #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ defined(CONFIG_MACH_MAINSTONE) || \ - defined(CONFIG_MACH_PCM027) + defined(CONFIG_MACH_PCM027) || \ + defined(CONFIG_MACH_MAGICIAN) #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h index 13762e80bf5..216921db9d6 100644 --- a/include/asm-arm/arch-pxa/magician.h +++ b/include/asm-arm/arch-pxa/magician.h @@ -12,6 +12,7 @@ #ifndef _MAGICIAN_H_ #define _MAGICIAN_H_ +#include #include /* @@ -108,4 +109,56 @@ #define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT) #define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT) +/* + * CPLD IRQs + */ + +#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) +#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) +#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) +#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) + +/* + * CPLD EGPIOs + */ + +#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ +#define MAGICIAN_EGPIO(reg,bit) \ + (MAGICIAN_EGPIO_BASE + 8*reg + bit) + +/* output */ + +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) + +/* input */ + +#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) +#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) + +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) + +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) + #endif /* _MAGICIAN_H_ */ -- cgit v1.2.3-70-g09d2 From e07ff8d8091eff8e208fe1e406c15e5de0fffd63 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 9 Apr 2008 19:27:10 +0100 Subject: [ARM] 4952/1: magician: add LCD detection, LCD power switching, update pxafb settings All magician devices I've encountered so far have featured the Toppoly TD028STEB1 display, so the Samsung LTP280QV support is untested. The power-on sequence is not correct because pxafb doesn't yet support enabling the LCD controller in the middle of the it. Signed-off-by: Philipp Zabel Signed-off-by: Russell King --- arch/arm/mach-pxa/magician.c | 121 +++++++++++++++++++++++++++++++++--- include/asm-arm/arch-pxa/magician.h | 2 + 2 files changed, 116 insertions(+), 7 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index d152a086e73..7de3bfe543b 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -144,7 +145,7 @@ static struct platform_device egpio = { }; /* - * LCD - Toppoly TD028STEB1 + * LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { @@ -163,12 +164,99 @@ static struct pxafb_mode_info toppoly_modes[] = { }, }; +static struct pxafb_mode_info samsung_modes[] = { + { + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + }, +}; + +static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) +{ + pr_debug("Toppoly LCD power\n"); + + if (on) { + pr_debug("on\n"); + gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + udelay(2000); + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); + udelay(2000); + /* FIXME: enable LCDC here */ + udelay(2000); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + udelay(2000); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + } else { + pr_debug("off\n"); + msleep(15); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + udelay(500); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + udelay(1000); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); + } +} + +static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) +{ + pr_debug("Samsung LCD power\n"); + + if (on) { + pr_debug("on\n"); + if (system_rev < 3) + gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); + else + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); + mdelay(10); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + mdelay(10); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + mdelay(30); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + mdelay(10); + } else { + pr_debug("off\n"); + mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + mdelay(30); + gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + mdelay(10); + gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + mdelay(10); + if (system_rev < 3) + gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); + else + gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); + } +} + static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_PixRsEdg, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixRsEdg, + .pxafb_lcd_power = toppoly_lcd_power, +}; + +static struct pxafb_mach_info samsung_info = { + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lccr0 = LCCR0_LDDALT | LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = LCCR3_PixFlEdg, + .pxafb_lcd_power = samsung_lcd_power, }; /* @@ -358,12 +446,31 @@ static struct platform_device *devices[] __initdata = { static void __init magician_init(void) { + void __iomem *cpld; + int lcd_select; + platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_i2c_info(NULL); pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); pxa_set_ficp_info(&magician_ficp_info); - set_pxa_fb_info(&toppoly_info); + + /* Check LCD type we have */ + cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); + if (cpld) { + u8 board_id = __raw_readb(cpld+0x14); + system_rev = board_id & 0x7; + lcd_select = board_id & 0x8; + iounmap(cpld); + pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); + if (lcd_select && (system_rev < 3)) + pxa_gpio_mode(GPIO75_MAGICIAN_SAMSUNG_POWER_MD); + pxa_gpio_mode(GPIO104_MAGICIAN_LCD_POWER_1_MD); + pxa_gpio_mode(GPIO105_MAGICIAN_LCD_POWER_2_MD); + pxa_gpio_mode(GPIO106_MAGICIAN_LCD_POWER_3_MD); + set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info); + } else + pr_err("LCD detection: CPLD mapping failed\n"); } diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h index 216921db9d6..b34fd5683e2 100644 --- a/include/asm-arm/arch-pxa/magician.h +++ b/include/asm-arm/arch-pxa/magician.h @@ -35,6 +35,7 @@ #define GPIO48_MAGICIAN_UNKNOWN 48 #define GPIO56_MAGICIAN_UNKNOWN 56 #define GPIO57_MAGICIAN_CAM_RESET 57 +#define GPIO75_MAGICIAN_SAMSUNG_POWER 75 #define GPIO83_MAGICIAN_nIR_EN 83 #define GPIO86_MAGICIAN_GSM_RESET 86 #define GPIO87_MAGICIAN_GSM_SELECT 87 @@ -82,6 +83,7 @@ #define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT) #define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT) #define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT) +#define GPIO75_MAGICIAN_SAMSUNG_POWER_MD (75 | GPIO_OUT) #define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT) #define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT) #define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT) -- cgit v1.2.3-70-g09d2 From 64c1dd3bbf67c958992c098d5d464a014df3fa46 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 10 Apr 2008 06:34:29 +0100 Subject: [ARM] 4959/1: PXA: Fix misprint in CICR1_RGBT_CONV This patch fixes misprint in definition of CICR1_RGBT_CONV in include/asm-arm/arch-pxa/pxa-regs.h Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index c28c5eaf04a..a322012f16a 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1635,7 +1635,7 @@ #define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ #define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ +#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ #define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ #define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ #define CICR1_RGB_F (1 << 11) /* RGB format */ -- cgit v1.2.3-70-g09d2 From baf1c5d2a08c828d6333e0a37bcdf5afb3d5d003 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 12 Apr 2008 20:08:16 +0100 Subject: [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks Let platform do some specific initialisation and cleanup things during pxaficp_ir probing and removing. E.g. this can be usefull to request/free gpios used by the platform to control the transceiver. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- drivers/net/irda/pxaficp_ir.c | 10 ++++++++++ include/asm-arm/arch-pxa/irda.h | 2 ++ 2 files changed, 12 insertions(+) (limited to 'include/asm-arm') diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 8239c520f1e..8db71ab2045 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -832,6 +832,11 @@ static int pxa_irda_probe(struct platform_device *pdev) if (err) goto err_mem_5; + if (si->pdata->startup) + err = si->pdata->startup(si->dev); + if (err) + goto err_startup; + dev->hard_start_xmit = pxa_irda_hard_xmit; dev->open = pxa_irda_start; dev->stop = pxa_irda_stop; @@ -857,6 +862,9 @@ static int pxa_irda_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, dev); if (err) { + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); +err_startup: kfree(si->tx_buff.head); err_mem_5: kfree(si->rx_buff.head); @@ -882,6 +890,8 @@ static int pxa_irda_remove(struct platform_device *_dev) if (dev) { struct pxa_irda *si = netdev_priv(dev); unregister_netdev(dev); + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); kfree(si->tx_buff.head); kfree(si->rx_buff.head); clk_put(si->fir_clk); diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h index 748406f384c..99f4f423a8e 100644 --- a/include/asm-arm/arch-pxa/irda.h +++ b/include/asm-arm/arch-pxa/irda.h @@ -10,6 +10,8 @@ struct pxaficp_platform_data { int transceiver_cap; void (*transceiver_mode)(struct device *dev, int mode); + int (*startup)(struct device *dev); + void (*shutdown)(struct device *dev); }; extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); -- cgit v1.2.3-70-g09d2 From d4e7d09f7accd1b0d1c8f149a44deffc8c141a46 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 12 Apr 2008 20:16:16 +0100 Subject: [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code Convert set/reset_scoop_gpio to generic gpio calls. This patch depends on the pxaficp_ir hooks patch. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 88 +++++++++++++++++++++++++++++------------ include/asm-arm/arch-pxa/tosa.h | 25 ++++-------- 2 files changed, 71 insertions(+), 42 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 9f5ca5497bb..49b5b83c0e4 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -166,8 +167,7 @@ static struct resource tosa_scoop_resources[] = { static struct scoop_config tosa_scoop_setup = { .io_dir = TOSA_SCOOP_IO_DIR, - .io_out = TOSA_SCOOP_IO_OUT, - + .gpio_base = TOSA_SCOOP_GPIO_BASE, }; struct platform_device tosascoop_device = { @@ -194,7 +194,7 @@ static struct resource tosa_scoop_jc_resources[] = { static struct scoop_config tosa_scoop_jc_setup = { .io_dir = TOSA_SCOOP_JC_IO_DIR, - .io_out = TOSA_SCOOP_JC_IO_OUT, + .gpio_base = TOSA_SCOOP_JC_GPIO_BASE, }; struct platform_device tosascoop_jc_device = { @@ -232,20 +232,8 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = { /* * USB Device Controller */ -static void tosa_udc_command(int cmd) -{ - switch(cmd) { - case PXA2XX_UDC_CMD_CONNECT: - set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); - break; - case PXA2XX_UDC_CMD_DISCONNECT: - reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP); - break; - } -} - static struct pxa2xx_udc_mach_info udc_info __initdata = { - .udc_command = tosa_udc_command, + .gpio_pullup = TOSA_GPIO_USB_PULLUP, .gpio_vbus = TOSA_GPIO_USB_IN, .gpio_vbus_inverted = 1, }; @@ -264,9 +252,39 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); - if (err) + if (err) { printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n"); + goto err_irq; + } + + err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); + goto err_gpio_wp; + } + err = gpio_direction_input(TOSA_GPIO_SD_WP); + if (err) + goto err_gpio_wp_dir; + + err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); + goto err_gpio_pwr; + } + err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0); + if (err) + goto err_gpio_pwr_dir; + return 0; + +err_gpio_pwr_dir: + gpio_free(TOSA_GPIO_PWR_ON); +err_gpio_pwr: +err_gpio_wp_dir: + gpio_free(TOSA_GPIO_SD_WP); +err_gpio_wp: + free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); +err_irq: return err; } @@ -275,19 +293,21 @@ static void tosa_mci_setpower(struct device *dev, unsigned int vdd) struct pxamci_platform_data* p_d = dev->platform_data; if (( 1 << vdd) & p_d->ocr_mask) { - set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + gpio_set_value(TOSA_GPIO_PWR_ON, 1); } else { - reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON); + gpio_set_value(TOSA_GPIO_PWR_ON, 0); } } static int tosa_mci_get_ro(struct device *dev) { - return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP); + return gpio_get_value(TOSA_GPIO_SD_WP); } static void tosa_mci_exit(struct device *dev, void *data) { + gpio_free(TOSA_GPIO_PWR_ON); + gpio_free(TOSA_GPIO_SD_WP); free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); } @@ -302,18 +322,36 @@ static struct pxamci_platform_data tosa_mci_platform_data = { /* * Irda */ -static void tosa_irda_transceiver_mode(struct device *dev, int mode) +static int tosa_irda_startup(struct device *dev) { - if (mode & IR_OFF) { - reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); - } else { - set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN); + int ret; + + ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); + if (ret) + return ret; + + ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); + if (ret) + gpio_free(TOSA_GPIO_IR_POWERDWN); + + return ret; } + +static void tosa_irda_shutdown(struct device *dev) +{ + gpio_free(TOSA_GPIO_IR_POWERDWN); +} + +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF)); } static struct pxaficp_platform_data tosa_ficp_platform_data = { .transceiver_cap = IR_SIRMODE | IR_OFF, .transceiver_mode = tosa_irda_transceiver_mode, + .startup = tosa_irda_startup, + .shutdown = tosa_irda_shutdown, }; /* diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c05e4faf85a..130bc6025cf 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -23,11 +23,12 @@ /* * SCOOP2 internal GPIOs */ +#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 #define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 -#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 -#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 -#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) +#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) +#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 #define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 @@ -35,7 +36,7 @@ /* GPIO Direction 1 : output mode / 0:input mode */ #define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ - TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_AUD_PWR_ON |\ TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) /* GPIO out put level when init 1: Hi */ #define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) @@ -43,10 +44,11 @@ /* * SCOOP2 jacket GPIOs */ +#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) #define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 #define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 #define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 -#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) #define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 #define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 @@ -55,11 +57,9 @@ /* GPIO Direction 1 : output mode / 0:input mode */ #define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ - TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ + TOSA_SCOOP_JC_CHRG_ERR_LED | \ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_JC_IO_OUT ( 0 ) /* * Timing Generator @@ -73,15 +73,6 @@ #define TG_PINICTL 0x06 #define TG_HPOSCTL 0x07 -/* - * LED - */ -#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 -#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 -#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 -#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 - - /* * PXA GPIOs */ -- cgit v1.2.3-70-g09d2 From 311c736c19ec5d9cfc9518542aeee844c2bc7a86 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 12 Apr 2008 20:17:02 +0100 Subject: [ARM] 4973/1: Tosa: use leds-gpio driver. Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-tosa. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 25 +++++++++++++++++++++++-- include/asm-arm/arch-pxa/tosa.h | 7 +++---- 2 files changed, 26 insertions(+), 6 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 49b5b83c0e4..af1cce31c74 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -421,9 +421,30 @@ static struct platform_device tosa_gpio_keys_device = { /* * Tosa LEDs */ +struct gpio_led tosa_gpio_leds[] = { + { + .name = "tosa:amber:charge", + .default_trigger = "main-battery-charging", + .gpio = TOSA_GPIO_CHRG_ERR_LED, + }, + { + .name = "tosa:green:mail", + .default_trigger = "nand-disk", + .gpio = TOSA_GPIO_NOTE_LED, + }, +}; + +struct gpio_led_platform_data tosa_gpio_leds_platform_data = { + .leds = tosa_gpio_leds, + .num_leds = ARRAY_SIZE(tosa_gpio_leds), +}; + static struct platform_device tosaled_device = { - .name = "tosa-led", - .id = -1, + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &tosa_gpio_leds_platform_data, + }, }; static struct platform_device *devices[] __initdata = { diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index 130bc6025cf..8bc7cdd0f79 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -46,8 +46,8 @@ */ #define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) #define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 -#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 -#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 +#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) +#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) #define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) #define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 #define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 @@ -56,8 +56,7 @@ #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ - TOSA_SCOOP_JC_CHRG_ERR_LED | \ +#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | \ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) -- cgit v1.2.3-70-g09d2 From 768dec4cc397a9c041b0f3cd605d3f6f758883e4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 15 Apr 2008 15:50:49 +0100 Subject: [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line Set up the IRQ line for the WM9713 device on the Zylonite. Signed-off-by: Mark Brown Acked-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/zylonite.c | 2 ++ arch/arm/mach-pxa/zylonite_pxa300.c | 6 ++++++ arch/arm/mach-pxa/zylonite_pxa320.c | 6 ++++++ include/asm-arm/arch-pxa/zylonite.h | 2 ++ 4 files changed, 16 insertions(+) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 9ca1d539bdc..dbb546216be 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -36,6 +36,8 @@ struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS]; int gpio_backlight; int gpio_eth_irq; +int wm9713_irq; + int lcd_id; int lcd_orientation; diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index b3e3049486a..324fb9daae2 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -69,6 +69,9 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + /* WM9713 IRQ */ + GPIO26_GPIO, + /* Keypad */ GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH, GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH, @@ -203,6 +206,9 @@ void __init zylonite_pxa300_init(void) /* MMC card detect & write protect for controller 0 */ zylonite_mmc_slot[0].gpio_cd = EXT_GPIO(0); zylonite_mmc_slot[0].gpio_wp = EXT_GPIO(2); + + /* WM9713 IRQ */ + wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26); } if (cpu_is_pxa300()) { diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index ce54195a454..193d07903b0 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,9 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + /* WM9713 IRQ */ + GPIO15_GPIO, + /* I2C */ GPIO32_I2C_SCL, GPIO33_I2C_SDA, @@ -190,5 +193,8 @@ void __init zylonite_pxa320_init(void) /* MMC card detect & write protect for controller 0 */ zylonite_mmc_slot[0].gpio_cd = mfp_to_gpio(MFP_PIN_GPIO1); zylonite_mmc_slot[0].gpio_wp = mfp_to_gpio(MFP_PIN_GPIO5); + + /* WM9713 IRQ */ + wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15); } } diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index 5f717d64ea7..4881b80f0f9 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -18,6 +18,8 @@ extern struct platform_mmc_slot zylonite_mmc_slot[]; extern int gpio_backlight; extern int gpio_eth_irq; +extern int wm9713_irq; + extern int lcd_id; extern int lcd_orientation; -- cgit v1.2.3-70-g09d2 From ba4eb7e60b11eba1ccd89d448e6d87d98df95da8 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 19 Apr 2008 10:42:25 +0100 Subject: [ARM] 5004/1: Tosa: make several unreferenced structures static. Now that scoop gpio's are converted to generic_gpio, tosascoop_device and tosascoop_jc_device don't have to be exported. Also make tosa_gpio_* static Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 8 ++++---- include/asm-arm/arch-pxa/tosa.h | 4 ---- 2 files changed, 4 insertions(+), 8 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index af1cce31c74..1722093cfe5 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -170,7 +170,7 @@ static struct scoop_config tosa_scoop_setup = { .gpio_base = TOSA_SCOOP_GPIO_BASE, }; -struct platform_device tosascoop_device = { +static struct platform_device tosascoop_device = { .name = "sharp-scoop", .id = 0, .dev = { @@ -197,7 +197,7 @@ static struct scoop_config tosa_scoop_jc_setup = { .gpio_base = TOSA_SCOOP_JC_GPIO_BASE, }; -struct platform_device tosascoop_jc_device = { +static struct platform_device tosascoop_jc_device = { .name = "sharp-scoop", .id = 1, .dev = { @@ -421,7 +421,7 @@ static struct platform_device tosa_gpio_keys_device = { /* * Tosa LEDs */ -struct gpio_led tosa_gpio_leds[] = { +static struct gpio_led tosa_gpio_leds[] = { { .name = "tosa:amber:charge", .default_trigger = "main-battery-charging", @@ -434,7 +434,7 @@ struct gpio_led tosa_gpio_leds[] = { }, }; -struct gpio_led_platform_data tosa_gpio_leds_platform_data = { +static struct gpio_led_platform_data tosa_gpio_leds_platform_data = { .leds = tosa_gpio_leds, .num_leds = ARRAY_SIZE(tosa_gpio_leds), }; diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index 8bc7cdd0f79..bb6e12137de 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -151,12 +151,8 @@ #define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) -extern struct platform_device tosascoop_jc_device; -extern struct platform_device tosascoop_device; - #define TOSA_KEY_SYNC KEY_102ND /* ??? */ - #ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES #define TOSA_KEY_RECORD KEY_YEN #define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA -- cgit v1.2.3-70-g09d2 From c546106cc15d300a5b3eba5a514c9238bb6593e8 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 19 Apr 2008 10:42:06 +0100 Subject: [ARM] 5002/1: tosa: add two more leds This adds support for two more leds: the wlan one (found in SL-6000W and SL-6000L) and the blutooth one (found in SL-6000W). Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 10 ++++++++++ include/asm-arm/arch-pxa/tosa.h | 8 ++++---- 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 1722093cfe5..6458f6d371d 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -432,6 +432,16 @@ static struct gpio_led tosa_gpio_leds[] = { .default_trigger = "nand-disk", .gpio = TOSA_GPIO_NOTE_LED, }, + { + .name = "tosa:dual:wlan", + .default_trigger = "none", + .gpio = TOSA_GPIO_WLAN_LED, + }, + { + .name = "tosa:blue:bluetooth", + .default_trigger = "none", + .gpio = TOSA_GPIO_BT_LED, + }, }; static struct gpio_led_platform_data tosa_gpio_leds_platform_data = { diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index bb6e12137de..c5b6fde6907 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -45,20 +45,20 @@ * SCOOP2 jacket GPIOs */ #define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) -#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 +#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) #define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) #define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 #define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 -#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 +#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | \ +#define TOSA_SCOOP_JC_IO_DIR ( \ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) + TOSA_SCOOP_JC_CARD_LIMIT_SEL ) /* * Timing Generator -- cgit v1.2.3-70-g09d2 From 05944d74bc28fffbcce159cb915d0acff82f30a1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 30 Nov 2006 20:43:51 +0000 Subject: [ARM] Add initial sparsemem support Signed-off-by: Russell King --- arch/arm/Kconfig | 8 ++++++++ arch/arm/mach-clps711x/Kconfig | 2 ++ include/asm-arm/memory.h | 3 +++ include/asm-arm/sparsemem.h | 10 ++++++++++ 4 files changed, 23 insertions(+) create mode 100644 include/asm-arm/sparsemem.h (limited to 'include/asm-arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006..df051bd24ba 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -422,6 +422,8 @@ config ARCH_SA1100 bool "SA1100-based" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL select ARCH_MTD_XIP select GENERIC_GPIO select GENERIC_TIME @@ -774,6 +776,12 @@ config ARCH_DISCONTIGMEM_ENABLE or have huge holes in the physical address space for other reasons. See for more. +config ARCH_SPARSEMEM_ENABLE + bool + +config ARCH_SELECT_MEMORY_MODEL + bool + config NODES_SHIFT int default "4" if ARCH_LH7A40X diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 0e2b641268a..dbaae5f746a 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -31,6 +31,8 @@ config ARCH_EDB7211 bool "EDB7211" select ISA select ARCH_DISCONTIGMEM_ENABLE + select ARCH_SPARSEMEM_ENABLE + select ARCH_SELECT_MEMORY_MODEL help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index d9bfb39adab..9ba4d7136e6 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -217,7 +217,10 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #ifndef CONFIG_DISCONTIGMEM #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET + +#ifndef CONFIG_SPARSEMEM #define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) +#endif #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h new file mode 100644 index 00000000000..277158191a0 --- /dev/null +++ b/include/asm-arm/sparsemem.h @@ -0,0 +1,10 @@ +#ifndef ASMARM_SPARSEMEM_H +#define ASMARM_SPARSEMEM_H + +#include + +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS + +#endif -- cgit v1.2.3-70-g09d2 From b685004f8dea2daae0306edcd358ed7de751aee9 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Wed, 16 Apr 2008 02:56:35 +0100 Subject: [ARM] 4988/1: Add GPIO lib support to the EP93xx Adds support for the generic GPIO lib to the EP93xx family. The gpio handling code has been moved from core.c to a new file called gpio.c. The GPIO based IRQ code has not been changed. Signed-off-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-ep93xx/Makefile | 2 +- arch/arm/mach-ep93xx/core.c | 109 +++---------------------- arch/arm/mach-ep93xx/gpio.c | 158 +++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-ep93xx/gpio.h | 21 +---- 5 files changed, 176 insertions(+), 115 deletions(-) create mode 100644 arch/arm/mach-ep93xx/gpio.c (limited to 'include/asm-arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006..a583c0bf820 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -255,6 +255,7 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO + select HAVE_GPIO_LIB help This enables support for the Cirrus EP93xx series of CPUs. diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 0ecf99761fe..c1252ca9648 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o +obj-y := core.o clock.o gpio.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 91f6a07a51d..8bc18724054 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -159,7 +159,7 @@ static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c }; -static void update_gpio_int_params(unsigned port) +void ep93xx_gpio_update_int_params(unsigned port) { BUG_ON(port > 2); @@ -175,98 +175,10 @@ static void update_gpio_int_params(unsigned port) EP93XX_GPIO_REG(int_en_register_offset[port])); } -/* Port ordering is: A B F D E C G H */ -static const u8 data_register_offset[8] = { - 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40, -}; - -static const u8 data_direction_register_offset[8] = { - 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, -}; - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -static void ep93xx_gpio_set_direction(unsigned line, int direction) -{ - unsigned int data_direction_register; - unsigned long flags; - unsigned char v; - - data_direction_register = - EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]); - - local_irq_save(flags); - if (direction == GPIO_OUT) { - if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Port A/B/F */ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); - update_gpio_int_params(line >> 3); - } - - v = __raw_readb(data_direction_register); - v |= 1 << (line & 7); - __raw_writeb(v, data_direction_register); - } else if (direction == GPIO_IN) { - v = __raw_readb(data_direction_register); - v &= ~(1 << (line & 7)); - __raw_writeb(v, data_direction_register); - } - local_irq_restore(flags); -} - -int gpio_direction_input(unsigned gpio) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - - ep93xx_gpio_set_direction(gpio, GPIO_IN); - - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - - gpio_set_value(gpio, value); - ep93xx_gpio_set_direction(gpio, GPIO_OUT); - - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -int gpio_get_value(unsigned gpio) -{ - unsigned int data_register; - - data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - - return !!(__raw_readb(data_register) & (1 << (gpio & 7))); -} -EXPORT_SYMBOL(gpio_get_value); - -void gpio_set_value(unsigned gpio, int value) +void ep93xx_gpio_int_mask(unsigned line) { - unsigned int data_register; - unsigned long flags; - unsigned char v; - - data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - - local_irq_save(flags); - v = __raw_readb(data_register); - if (value) - v |= 1 << (gpio & 7); - else - v &= ~(1 << (gpio & 7)); - __raw_writeb(v, data_register); - local_irq_restore(flags); + gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } -EXPORT_SYMBOL(gpio_set_value); - /************************************************************************* * EP93xx IRQ handling @@ -316,7 +228,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); @@ -332,7 +244,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } @@ -343,7 +255,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq) int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } static void ep93xx_gpio_irq_unmask(unsigned int irq) @@ -352,7 +264,7 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); } @@ -368,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) const int port = gpio >> 3; const int port_mask = 1 << (gpio & 7); - ep93xx_gpio_set_direction(gpio, GPIO_IN); + gpio_direction_output(gpio, gpio_get_value(gpio)); switch (type) { case IRQT_RISING: @@ -411,7 +323,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) desc->status &= ~IRQ_TYPE_SENSE_MASK; desc->status |= type & IRQ_TYPE_SENSE_MASK; - update_gpio_int_params(port); + ep93xx_gpio_update_int_params(port); return 0; } @@ -549,6 +461,7 @@ static struct platform_device ep93xx_ohci_device = { .resource = ep93xx_ohci_resources, }; +extern void ep93xx_gpio_init(void); void __init ep93xx_init_devices(void) { @@ -562,6 +475,8 @@ void __init ep93xx_init_devices(void) __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG); + ep93xx_gpio_init(); + amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); amba_device_register(&uart3_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c new file mode 100644 index 00000000000..dc2e4c00d98 --- /dev/null +++ b/arch/arm/mach-ep93xx/gpio.c @@ -0,0 +1,158 @@ +/* + * linux/arch/arm/mach-ep93xx/gpio.c + * + * Generic EP93xx GPIO handling + * + * Copyright (c) 2008 Ryan Mallon + * + * Based on code originally from: + * linux/arch/arm/mach-ep93xx/core.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +struct ep93xx_gpio_chip { + struct gpio_chip chip; + + unsigned int data_reg; + unsigned int data_dir_reg; +}; + +#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) + +/* From core.c */ +extern void ep93xx_gpio_int_mask(unsigned line); +extern void ep93xx_gpio_update_int_params(unsigned port); + +static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + u8 v; + + local_irq_save(flags); + v = __raw_readb(ep93xx_chip->data_dir_reg); + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_dir_reg); + local_irq_restore(flags); + + return 0; +} + +static int ep93xx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int val) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + int line; + u8 v; + + local_irq_save(flags); + + /* Set the value */ + v = __raw_readb(ep93xx_chip->data_reg); + if (val) + v |= (1 << offset); + else + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_reg); + + /* Drive as an output */ + line = chip->base + offset; + if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { + /* Ports A/B/F */ + ep93xx_gpio_int_mask(line); + ep93xx_gpio_update_int_params(line >> 3); + } + + v = __raw_readb(ep93xx_chip->data_dir_reg); + v |= (1 << offset); + __raw_writeb(v, ep93xx_chip->data_dir_reg); + + local_irq_restore(flags); + + return 0; +} + +static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + + return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); +} + +static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + unsigned long flags; + u8 v; + + local_irq_save(flags); + v = __raw_readb(ep93xx_chip->data_reg); + if (val) + v |= (1 << offset); + else + v &= ~(1 << offset); + __raw_writeb(v, ep93xx_chip->data_reg); + local_irq_restore(flags); +} + +static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); + u8 data_reg, data_dir_reg; + int i; + + data_reg = __raw_readb(ep93xx_chip->data_reg); + data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); + + for (i = 0; i < chip->ngpio; i++) + seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i, + (data_reg & (1 << i)) ? "set" : "clear", + (data_dir_reg & (1 << i)) ? "out" : "in"); +} + +#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ + { \ + .chip = { \ + .label = name, \ + .direction_input = ep93xx_gpio_direction_input, \ + .direction_output = ep93xx_gpio_direction_output, \ + .get = ep93xx_gpio_get, \ + .set = ep93xx_gpio_set, \ + .dbg_show = ep93xx_gpio_dbg_show, \ + .base = base_gpio, \ + .ngpio = 8, \ + }, \ + .data_reg = EP93XX_GPIO_REG(dr), \ + .data_dir_reg = EP93XX_GPIO_REG(ddr), \ + } + +static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { + EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), + EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), + EP93XX_GPIO_BANK("C", 0x30, 0x34, 40), + EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), + EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), + EP93XX_GPIO_BANK("F", 0x08, 0x18, 16), + EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), + EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), +}; + +void __init ep93xx_gpio_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) + gpiochip_add(&ep93xx_gpio_banks[i].chip); +} diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index 9b1864bbd9a..186e7c715f8 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -101,30 +101,17 @@ /* new generic GPIO API - see Documentation/gpio.txt */ -static inline int gpio_request(unsigned gpio, const char *label) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - return 0; -} +#include -static inline void gpio_free(unsigned gpio) -{ -} - -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); -void gpio_set_value(unsigned gpio, int value); - -#include /* cansleep wrappers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep /* * Map GPIO A0..A7 (0..7) to irq 64..71, * B0..B7 (7..15) to irq 72..79, and * F0..F7 (16..24) to irq 80..87. */ - static inline int gpio_to_irq(unsigned gpio) { if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) -- cgit v1.2.3-70-g09d2 From 3f3acefb63dc70d767f730045ab7ebaa81938d77 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 11 Apr 2008 22:19:45 +0200 Subject: [ARM] pxa: V4L2 soc_camera driver for PXA270 This patch adds a driver for the Quick Capture Interface on the PXA270. It is based on the original driver from Intel, but has been re-worked multiple times since then, now it also supports the V4L2 API. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King --- arch/arm/mach-pxa/devices.c | 32 ++++++++++++++++++++ include/asm-arm/arch-pxa/camera.h | 48 ++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/pxa2xx-gpio.h | 53 ++++++++++++++++++++++++++++++++++ 3 files changed, 133 insertions(+) create mode 100644 include/asm-arm/arch-pxa/camera.h (limited to 'include/asm-arm') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 3665e242f1f..d6c05b6eab3 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "devices.h" @@ -566,6 +567,37 @@ struct platform_device pxa27x_device_ssp3 = { .resource = pxa27x_resource_ssp3, .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), }; + +static struct resource pxa27x_resource_camera[] = { + [0] = { + .start = 0x50000000, + .end = 0x50000fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CAMERA, + .end = IRQ_CAMERA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32); + +static struct platform_device pxa27x_device_camera = { + .name = "pxa27x-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &pxa27x_dma_mask_camera, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pxa27x_resource_camera), + .resource = pxa27x_resource_camera, +}; + +void __init pxa_set_camera_info(struct pxacamera_platform_data *info) +{ + pxa_register_device(&pxa27x_device_camera, info); +} #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ #ifdef CONFIG_PXA3xx diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h new file mode 100644 index 00000000000..39516ced8b1 --- /dev/null +++ b/include/asm-arm/arch-pxa/camera.h @@ -0,0 +1,48 @@ +/* + camera.h - PXA camera driver header file + + Copyright (C) 2003, Intel Corporation + Copyright (C) 2008, Guennadi Liakhovetski + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define PXA_CAMERA_MASTER 1 +#define PXA_CAMERA_DATAWIDTH_4 2 +#define PXA_CAMERA_DATAWIDTH_5 4 +#define PXA_CAMERA_DATAWIDTH_8 8 +#define PXA_CAMERA_DATAWIDTH_9 0x10 +#define PXA_CAMERA_DATAWIDTH_10 0x20 +#define PXA_CAMERA_PCLK_EN 0x40 +#define PXA_CAMERA_MCLK_EN 0x80 +#define PXA_CAMERA_PCP 0x100 +#define PXA_CAMERA_HSP 0x200 +#define PXA_CAMERA_VSP 0x400 + +struct pxacamera_platform_data { + int (*init)(struct device *); + int (*power)(struct device *, int); + int (*reset)(struct device *, int); + + unsigned long flags; + unsigned long mclk_10khz; +}; + +extern void pxa_set_camera_info(struct pxacamera_platform_data *); + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h index fb418944753..763313c5e6b 100644 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -22,10 +22,15 @@ #define GPIO19_DREQ1 19 /* External DMA Request */ #define GPIO20_DREQ0 20 /* External DMA Request */ #define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ #define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO24_CIF_FV 24 /* Camera frame start signal */ #define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO25_CIF_LV 25 /* Camera line start signal */ #define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ #define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ #define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ #define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ #define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ @@ -46,18 +51,24 @@ #define GPIO41_FFRTS 41 /* FFUART request to send */ #define GPIO42_BTRXD 42 /* BTUART receive data */ #define GPIO42_HWRXD 42 /* HWUART receive data */ +#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ #define GPIO43_BTTXD 43 /* BTUART transmit data */ #define GPIO43_HWTXD 43 /* HWUART transmit data */ +#define GPIO43_CIF_FV 43 /* Camera frame start signal */ #define GPIO44_BTCTS 44 /* BTUART clear to send */ #define GPIO44_HWCTS 44 /* HWUART clear to send */ +#define GPIO44_CIF_LV 44 /* Camera line start signal */ #define GPIO45_BTRTS 45 /* BTUART request to send */ #define GPIO45_HWRTS 45 /* HWUART request to send */ #define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ +#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ #define GPIO46_ICPRXD 46 /* ICP receive data */ #define GPIO46_STRXD 46 /* STD_UART receive data */ #define GPIO47_ICPTXD 47 /* ICP transmit data */ #define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ #define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ #define GPIO49_nPWE 49 /* Write Enable for Card Space */ #define GPIO50_nPIOR 50 /* I/O Read for Card Space */ #define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ @@ -112,12 +123,25 @@ #define GPIO82_NSFRM 82 /* NSSP Frame */ #define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ #define GPIO83_NSTXD 83 /* NSSP transmit */ +#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ #define GPIO84_NSRXD 84 /* NSSP receive */ #define GPIO84_CIF_FV 84 /* Camera frame start signal */ #define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ #define GPIO85_CIF_LV 85 /* Camera line start signal */ +#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ +#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ #define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ +#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ +#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ +#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ +#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ #define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ +#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ +#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ +#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ +#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ +#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ +#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ #define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ #define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ #define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ @@ -126,6 +150,9 @@ #define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ #define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ #define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ +#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ +#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ +#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ /* GPIO alternate function mode & direction */ @@ -161,11 +188,16 @@ #define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) #define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) #define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) #define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) #define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) #define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) #define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) #define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) #define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) #define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) @@ -193,25 +225,33 @@ #define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) #define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) #define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) +#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) #define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) #define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) #define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) +#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) +#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) #define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) #define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) #define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) #define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) #define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) #define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) #define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) #define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) #define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) #define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) #define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) #define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) #define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) #define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) @@ -269,26 +309,39 @@ #define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) #define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) #define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) +#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) #define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) #define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) #define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) #define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) #define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) +#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) +#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) +#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) #define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) #define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) #define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) +#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) #define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) #define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) #define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) #define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) +#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) #define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) +#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) #define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) #define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) +#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) #define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) +#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) #define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) +#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) #define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) +#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) #define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) #define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -- cgit v1.2.3-70-g09d2