From a70ce072b3883e431575449f3e294c27235590e5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 31 May 2008 15:47:17 +0800 Subject: Blackfin arch: update anomaly headers from toolchain trunk Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf537/anomaly.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'include/asm-blackfin/mach-bf537') diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index a6b08facb24..8460ab9c324 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -132,8 +132,8 @@ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) -/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */ -#define ANOMALY_05000350 (__SILICON_REVISION__ < 3) +/* New Feature: UART Remains Enabled after UART Boot */ +#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ @@ -145,12 +145,10 @@ /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3) +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) - - /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) #define ANOMALY_05000158 (0) -- cgit v1.2.3-70-g09d2 From 1feaa51d84e9611521ec6e59172f9f90db274588 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 3 Jun 2008 12:19:45 +0800 Subject: Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver. Hide difference in head file. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 30 ++++------------------- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 6 +++++ include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 6 +++++ include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 6 +++++ include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 6 +++++ include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 6 +++++ 6 files changed, 35 insertions(+), 25 deletions(-) (limited to 'include/asm-blackfin/mach-bf537') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d6b4ead693b..636b6876c6f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -# ifdef BF54x - if (UART_GET_MSR(uart) & CTS) -# else - if (gpio_get_value(uart->cts_pin)) -# endif + if (UART_GET_CTS(uart)) return TIOCM_DSR | TIOCM_CAR; else #endif @@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); -# else - gpio_set_value(uart->rts_pin, 0); -# endif + UART_CLEAR_RTS(uart); else -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); -# else - gpio_set_value(uart->rts_pin, 1); -# endif + UART_SET_RTS(uart); #endif } @@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, /* Disable UART */ ier = UART_GET_IER(uart); -#ifdef CONFIG_BF54x - UART_CLEAR_IER(uart, 0xF); -#else - UART_PUT_IER(uart, 0); -#endif + UART_DISABLE_INTS(uart); /* Set DLAB in LCR to Access DLL and DLH */ UART_SET_DLAB(uart); @@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_PUT_LCR(uart, lcr); /* Enable UART */ -#ifdef CONFIG_BF54x - UART_SET_IER(uart, ier); -#else - UART_PUT_IER(uart, ier); -#endif + UART_ENABLE_INTS(uart, ier); val = UART_GET_GCTL(uart); val |= UCEN; diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 26e3c8076b4..96bd09e31e3 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index d016603b661..e924569ad1d 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index f79d1a0e912..41d7b6490bb 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 5eb46a77d91..59b4ad4e5b4 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -57,6 +57,12 @@ #define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS)) +#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS)) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 7a962876929..30d90b580f1 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN -- cgit v1.2.3-70-g09d2 From f30ac0ce34f32bb998ac87e37b251374de03e603 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:46:39 +0800 Subject: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 40 ++++++++++------------- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 2 +- 6 files changed, 23 insertions(+), 27 deletions(-) (limited to 'include/asm-blackfin/mach-bf537') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index f20952c43cb..fd9bb777df2 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -49,6 +49,7 @@ #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) +#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } /* * Check the modem control lines before * transmitting anything. @@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) } #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS -static void bfin_serial_do_work(struct work_struct *work) -{ - struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); - - bfin_serial_mctrl_check(uart); -} -#endif - #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { @@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; + /* + * Check the modem control lines before + * transmitting anything. + */ + bfin_serial_mctrl_check(uart); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->port.x_char = 0; } - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; - schedule_work(&uart->cts_workqueue); + uart->cts_timer.data = (unsigned long)(uart); + uart->cts_timer.function = (void *)bfin_serial_mctrl_check; + uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; + add_timer(&(uart->cts_timer)); } else { tty->hw_stopped = 0; } @@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); + init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 96bd09e31e3..2526b6ed6fa 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index e924569ad1d..ebf592b59aa 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 41d7b6490bb..1bf56ffa22f 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index aabe5b92f11..5e29446a8e0 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -99,7 +99,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 30d90b580f1..8aa02780e64 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif -- cgit v1.2.3-70-g09d2