From a00736e936c2a1e9c36f22f6f3a69392eaab51f4 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 19 Jun 2008 20:26:19 +0200 Subject: sparc: copy sparc64 specific files to asm-sparc Used the following script to copy the files: cd include set -e SPARC64=`ls asm-sparc64` for FILE in ${SPARC64}; do if [ -f asm-sparc/$FILE ]; then echo $FILE exist in asm-sparc else git mv asm-sparc64/$FILE asm-sparc/$FILE printf "#include \n" > asm-sparc64/$FILE git add asm-sparc64/$FILE fi done Signed-off-by: Sam Ravnborg --- include/asm-sparc/bbc.h | 225 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 include/asm-sparc/bbc.h (limited to 'include/asm-sparc/bbc.h') diff --git a/include/asm-sparc/bbc.h b/include/asm-sparc/bbc.h new file mode 100644 index 00000000000..423a85800aa --- /dev/null +++ b/include/asm-sparc/bbc.h @@ -0,0 +1,225 @@ +/* + * bbc.h: Defines for BootBus Controller found on UltraSPARC-III + * systems. + * + * Copyright (C) 2000 David S. Miller (davem@redhat.com) + */ + +#ifndef _SPARC64_BBC_H +#define _SPARC64_BBC_H + +/* Register sizes are indicated by "B" (Byte, 1-byte), + * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or + * "Q" (Quad, 8 bytes) inside brackets. + */ + +#define BBC_AID 0x00 /* [B] Agent ID */ +#define BBC_DEVP 0x01 /* [B] Device Present */ +#define BBC_ARB 0x02 /* [B] Arbitration */ +#define BBC_QUIESCE 0x03 /* [B] Quiesce */ +#define BBC_WDACTION 0x04 /* [B] Watchdog Action */ +#define BBC_SPG 0x06 /* [B] Soft POR Gen */ +#define BBC_SXG 0x07 /* [B] Soft XIR Gen */ +#define BBC_PSRC 0x08 /* [W] POR Source */ +#define BBC_XSRC 0x0c /* [B] XIR Source */ +#define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/ +#define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */ +#define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */ +#define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */ +#define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */ +#define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */ +#define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */ +#define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/ +#define BBC_EBUST 0x20 /* [Q] EBUS Timing */ +#define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */ +#define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */ +#define BBC_I2C_SEL 0x2d /* [B] I2C Selection */ +#define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */ +#define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/ +#define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */ +#define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/ +#define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */ +#define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */ + +#define BBC_REGS_SIZE 0x40 + +/* There is a 2K scratch ram area at offset 0x80000 but I doubt + * we will use it for anything. + */ + +/* Agent ID register. This register shows the Safari Agent ID + * for the processors. The value returned depends upon which + * cpu is reading the register. + */ +#define BBC_AID_ID 0x07 /* Safari ID */ +#define BBC_AID_RESV 0xf8 /* Reserved */ + +/* Device Present register. One can determine which cpus are actually + * present in the machine by interrogating this register. + */ +#define BBC_DEVP_CPU0 0x01 /* Processor 0 present */ +#define BBC_DEVP_CPU1 0x02 /* Processor 1 present */ +#define BBC_DEVP_CPU2 0x04 /* Processor 2 present */ +#define BBC_DEVP_CPU3 0x08 /* Processor 3 present */ +#define BBC_DEVP_RESV 0xf0 /* Reserved */ + +/* Arbitration register. This register is used to block access to + * the BBC from a particular cpu. + */ +#define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */ +#define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */ +#define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */ +#define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */ +#define BBC_ARB_RESV 0xf0 /* Reserved */ + +/* Quiesce register. Bus and BBC segments for cpus can be disabled + * with this register, ie. for hot plugging. + */ +#define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */ +#define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */ +#define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */ +#define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */ +#define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */ +#define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */ +#define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */ +#define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */ + +/* Watchdog Action register. When the watchdog device timer expires + * a line is enabled to the BBC. The action BBC takes when this line + * is asserted can be controlled by this regiser. + */ +#define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset. + * When clear, BBC ignores watchdog signal. + */ +#define BBC_WDACTION_RESV 0xfe /* Reserved */ + +/* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted + * for specific processors or all processors via this register. + */ +#define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */ +#define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */ +#define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */ +#define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */ +#define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset + * the entire system. + */ +#define BBC_SPG_RESV 0xe0 /* Reserved */ + +/* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal + * may be asserted to specific processors via this register. + */ +#define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */ +#define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */ +#define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */ +#define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */ +#define BBC_SXG_RESV 0xf0 /* Reserved */ + +/* POR Source register. One may identify the cause of the most recent + * reset by reading this register. + */ +#define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */ +#define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */ +#define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */ +#define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */ +#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */ +#define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */ +#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */ +#define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */ +#define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */ +#define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */ +#define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */ +#define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */ +#define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */ +#define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */ +#define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */ +#define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers + * were updated. + */ +#define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */ +#define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring + * device + */ + +/* XIR Source register. The source of an XIR event sent to a processor may + * be determined via this register. + */ +#define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */ +#define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */ +#define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because: + * a) Super I/O watchdog fired, or + * b) XIR push button was activated + */ +#define BBC_XSRC_RESV 0xc0 /* Reserved */ + +/* Clock Synthesizers Control register. This register provides the big-bang + * programming interface to the two clock synthesizers of the machine. + */ +#define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */ +#define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */ +#define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */ +#define BBC_CSC_RESV 0x78 /* Reserved */ +#define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */ + +/* Energy Star Control register. This register is used to generate the + * clock frequency change trigger to the main system devices (Schizo and + * the processors). The transition occurs when bits in this register + * go from 0 to 1, only one bit must be set at once else no action + * occurs. Basically the sequence of events is: + * a) Choose new frequency: full, 1/2 or 1/32 + * b) Program this desired frequency into the cpus and Schizo. + * c) Set the same value in this register. + * d) 16 system clocks later, clear this register. + */ +#define BBC_ES_CTRL_1_1 0x01 /* Full frequency */ +#define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */ +#define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */ +#define BBC_ES_RESV 0xdc /* Reserved */ + +/* Energy Star Assert Change Time register. This determines the number + * of BBC clock cycles (which is half the system frequency) between + * the detection of FREEZE_ACK being asserted and the assertion of + * the CLK_CHANGE_L[2:0] signals. + */ +#define BBC_ES_ACT_VAL 0xff + +/* Energy Star Assert Bypass Time register. This determines the number + * of BBC clock cycles (which is half the system frequency) between + * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of + * the ESTAR_PLL_BYPASS signal. + */ +#define BBC_ES_ABT_VAL 0xffff + +/* Energy Star PLL Settle Time register. This determines the number of + * BBC clock cycles (which is half the system frequency) between the + * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L + * signal. + */ +#define BBC_ES_PST_VAL 0xffffffff + +/* Energy Star Frequency Switch Latency register. This is the number of + * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first + * edge of the Safari clock at the new frequency. + */ +#define BBC_ES_FSL_VAL 0xffffffff + +/* Keyboard Beep control register. This is a simple enabler for the audio + * beep sound. + */ +#define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */ +#define BBC_KBD_BEEP_RESV 0xfe /* Reserved */ + +/* Keyboard Beep Counter register. There is a free-running counter inside + * the BBC which runs at half the system clock. The bit set in this register + * determines when the audio sound is generated. So for example if bit + * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep + * generator automatically selects a different bit to use if the system clock + * is changed via Energy Star. + */ +#define BBC_KBD_BCNT_BITS 0x0007fc00 +#define BBC_KBC_BCNT_RESV 0xfff803ff + +#endif /* _SPARC64_BBC_H */ + -- cgit v1.2.3-70-g09d2