From b4b86416712d79a77cdc53756751b3b91fbb7a3d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 10 Jul 2008 15:25:21 +0200 Subject: x86, VisWS: turn into generic arch, create include/asm-x86/visws/ move the include/asm-x86/mach-visws/ VISWS specific hardware details include files into include/asm-x86/visws, to be used from generic code. No code changed. Signed-off-by: Ingo Molnar --- include/asm-x86/visws/piix4.h | 107 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 include/asm-x86/visws/piix4.h (limited to 'include/asm-x86/visws/piix4.h') diff --git a/include/asm-x86/visws/piix4.h b/include/asm-x86/visws/piix4.h new file mode 100644 index 00000000000..83ea4f46e41 --- /dev/null +++ b/include/asm-x86/visws/piix4.h @@ -0,0 +1,107 @@ +#ifndef __I386_SGI_PIIX_H +#define __I386_SGI_PIIX_H + +/* + * PIIX4 as used on SGI Visual Workstations + */ + +#define PIIX_PM_START 0x0F80 + +#define SIO_GPIO_START 0x0FC0 + +#define SIO_PM_START 0x0FC8 + +#define PMBASE PIIX_PM_START +#define GPIREG0 (PMBASE+0x30) +#define GPIREG(x) (GPIREG0+((x)/8)) +#define GPIBIT(x) (1 << ((x)%8)) + +#define PIIX_GPI_BD_ID1 18 +#define PIIX_GPI_BD_ID2 19 +#define PIIX_GPI_BD_ID3 20 +#define PIIX_GPI_BD_ID4 21 +#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1) +#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \ + GPIBIT(PIIX_GPI_BD_ID2) | \ + GPIBIT(PIIX_GPI_BD_ID3) | \ + GPIBIT(PIIX_GPI_BD_ID4) ) + +#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8) + +#define SIO_INDEX 0x2e +#define SIO_DATA 0x2f + +#define SIO_DEV_SEL 0x7 +#define SIO_DEV_ENB 0x30 +#define SIO_DEV_MSB 0x60 +#define SIO_DEV_LSB 0x61 + +#define SIO_GP_DEV 0x7 + +#define SIO_GP_BASE SIO_GPIO_START +#define SIO_GP_MSB (SIO_GP_BASE>>8) +#define SIO_GP_LSB (SIO_GP_BASE&0xff) + +#define SIO_GP_DATA1 (SIO_GP_BASE+0) + +#define SIO_PM_DEV 0x8 + +#define SIO_PM_BASE SIO_PM_START +#define SIO_PM_MSB (SIO_PM_BASE>>8) +#define SIO_PM_LSB (SIO_PM_BASE&0xff) +#define SIO_PM_INDEX (SIO_PM_BASE+0) +#define SIO_PM_DATA (SIO_PM_BASE+1) + +#define SIO_PM_FER2 0x1 + +#define SIO_PM_GP_EN 0x80 + + + +/* + * This is the dev/reg where generating a config cycle will + * result in a PCI special cycle. + */ +#define SPECIAL_DEV 0xff +#define SPECIAL_REG 0x00 + +/* + * PIIX4 needs to see a special cycle with the following data + * to be convinced the processor has gone into the stop grant + * state. PIIX4 insists on seeing this before it will power + * down a system. + */ +#define PIIX_SPECIAL_STOP 0x00120002 + +#define PIIX4_RESET_PORT 0xcf9 +#define PIIX4_RESET_VAL 0x6 + +#define PMSTS_PORT 0xf80 // 2 bytes PM Status +#define PMEN_PORT 0xf82 // 2 bytes PM Enable +#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control + +#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state + +/* + * PMSTS and PMEN I/O bit definitions. + * (Bits are the same in both registers) + */ +#define PM_STS_RSM (1<<15) // Resume Status +#define PM_STS_PWRBTNOR (1<<11) // Power Button Override +#define PM_STS_RTC (1<<10) // RTC status +#define PM_STS_PWRBTN (1<<8) // Power Button Pressed? +#define PM_STS_GBL (1<<5) // Global Status +#define PM_STS_BM (1<<4) // Bus Master Status +#define PM_STS_TMROF (1<<0) // Timer Overflow Status. + +/* + * Stop clock GPI register + */ +#define PIIX_GPIREG0 (0xf80 + 0x30) + +/* + * Stop clock GPI bit in GPIREG0 + */ +#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in + +#endif -- cgit v1.2.3-70-g09d2