From 312f7da2824c82800ee78d6190f12854456957af Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:38:03 +0800 Subject: [PATCH] libata: interrupt driven pio for libata-core - add PIO_ST_FIRST for the state before sending ATAPI CDB or sending "ATA PIO data out" first data block. - add ATA_TFLAG_POLLING and ATA_DFLAG_CDB_INTR flags - remove the ATA_FLAG_NOINTR flag since the interrupt handler is now aware of the states - modify ata_pio_sector() and atapi_pio_bytes() to work in the interrupt context - modify the ata_host_intr() to handle PIO interrupts - modify ata_qc_issue_prot() to initialize states - atapi_packet_task() changed to handle "ATA PIO data out" first data block - support the pre-ATA4 ATAPI device which raise interrupt when ready to receive CDB Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- include/linux/ata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index a5b74efab06..6fec2f6f2d5 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -181,6 +181,7 @@ enum { ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ + ATA_TFLAG_POLLING = (1 << 4), /* set nIEN to 1 and use polling */ }; enum ata_tf_protocols { @@ -250,6 +251,8 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) + static inline int atapi_cdb_len(u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; -- cgit v1.2.3-70-g09d2 From 07f6f7d074e68d56d82e7cc5c65096033ac8dc56 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 1 Nov 2005 19:33:20 +0800 Subject: [PATCH] libata irq-pio: add read/write multiple support - add is_multi_taskfile() to ata.h - initialize ata_device->multi_count with device identify data - use ata_pio_sectors() to support r/w multiple commands Signed-off-by: Albert Lee ======== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 44 ++++++++++++++++++++++++++++++++++++++------ include/linux/ata.h | 8 ++++++++ 2 files changed, 46 insertions(+), 6 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 2e0e6cca327..59a4a26bc13 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1261,6 +1261,12 @@ retry: } + if (dev->id[59] & 0x100) { + dev->multi_count = dev->id[59] & 0xff; + DPRINTK("ata%u: dev %u multi count %u\n", + ap->id, device, dev->multi_count); + } + ap->host->max_cmd_len = 16; } @@ -2804,7 +2810,7 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * HSM_ST_POLL state. + * HSM_ST_LAST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { @@ -3020,6 +3026,32 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) } } +/** + * ata_pio_sectors - Transfer one or many 512-byte sectors. + * @qc: Command on going + * + * Transfer one or many ATA_SECT_SIZE of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + assert(qc->dev->multi_count); + + nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); +} + /** * atapi_send_cdb - Write CDB bytes to hardware * @ap: Port to which ATAPI device is attached. @@ -3118,11 +3150,11 @@ static int ata_pio_first_block(struct ata_port *ap) * send first data block. */ - /* ata_pio_sector() might change the state to HSM_ST_LAST. - * so, the state is changed here before ata_pio_sector(). + /* ata_pio_sectors() might change the state to HSM_ST_LAST. + * so, the state is changed here before ata_pio_sectors(). */ ap->hsm_task_state = HSM_ST; - ata_pio_sector(qc); + ata_pio_sectors(qc); ata_altstatus(ap); /* flush */ } else /* send CDB */ @@ -3327,7 +3359,7 @@ static void ata_pio_block(struct ata_port *ap) return; } - ata_pio_sector(qc); + ata_pio_sectors(qc); } ata_altstatus(ap); /* flush */ @@ -4213,7 +4245,7 @@ fsm_start: goto fsm_start; } - ata_pio_sector(qc); + ata_pio_sectors(qc); if (ap->hsm_task_state == HSM_ST_LAST && (!(qc->tf.flags & ATA_TFLAG_WRITE))) { diff --git a/include/linux/ata.h b/include/linux/ata.h index d54da3306d2..f512104a1a3 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -293,6 +293,14 @@ static inline int is_atapi_taskfile(const struct ata_taskfile *tf) (tf->protocol == ATA_PROT_ATAPI_DMA); } +static inline int is_multi_taskfile(struct ata_taskfile *tf) +{ + return (tf->command == ATA_CMD_READ_MULTI) || + (tf->command == ATA_CMD_WRITE_MULTI) || + (tf->command == ATA_CMD_READ_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_EXT); +} + static inline int ata_ok(u8 status) { return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR)) -- cgit v1.2.3-70-g09d2 From c2956a3b0d1c17b38da369811a6ce93eb7a01a04 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Fri, 3 Mar 2006 10:34:05 +0800 Subject: [PATCH] libata-dev: recognize WRITE_MULTI_FUA_EXT for r/w multiple Recognize ATA_CMD_WRITE_MULTI_FUA_EXT as r/w multiple commands. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- include/linux/ata.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index 469952366ed..e7b0c21f6cd 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -314,7 +314,8 @@ static inline int is_multi_taskfile(struct ata_taskfile *tf) return (tf->command == ATA_CMD_READ_MULTI) || (tf->command == ATA_CMD_WRITE_MULTI) || (tf->command == ATA_CMD_READ_MULTI_EXT) || - (tf->command == ATA_CMD_WRITE_MULTI_EXT); + (tf->command == ATA_CMD_WRITE_MULTI_EXT) || + (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT); } static inline int ata_ok(u8 status) -- cgit v1.2.3-70-g09d2 From 9be1e979f2e1e57a091a658fa88dac266f9fd6fe Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 20:58:17 +0900 Subject: [PATCH] libata-eh: add ATA and libata flags for new EH Add ATA and libata flags to be used by new EH. Signed-off-by: Tejun Heo --- include/linux/ata.h | 13 +++++++++++++ include/linux/libata.h | 8 ++++++++ 2 files changed, 21 insertions(+) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index 312a2c0c64e..a7c41f3df8f 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -97,6 +97,9 @@ enum { ATA_DRQ = (1 << 3), /* data request i/o */ ATA_ERR = (1 << 0), /* have an error */ ATA_SRST = (1 << 2), /* software reset */ + ATA_ICRC = (1 << 7), /* interface CRC error */ + ATA_UNC = (1 << 6), /* uncorrectable media error */ + ATA_IDNF = (1 << 4), /* ID not found */ ATA_ABORTED = (1 << 2), /* command aborted */ /* ATA command block registers */ @@ -192,6 +195,16 @@ enum { SCR_ACTIVE = 3, SCR_NOTIFICATION = 4, + /* SError bits */ + SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */ + SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */ + SERR_DATA = (1 << 8), /* unrecovered data error */ + SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */ + SERR_PROTOCOL = (1 << 10), /* protocol violation */ + SERR_INTERNAL = (1 << 11), /* host internal error */ + SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */ + SERR_DEV_XCHG = (1 << 26), /* device exchanged */ + /* struct ata_taskfile flags */ ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */ ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 5ad50163c8e..6fe5ed8eabf 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -155,6 +155,7 @@ enum { ATA_FLAG_EH_PENDING = (1 << 16), /* EH pending */ ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ + ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ @@ -225,6 +226,13 @@ enum { ATA_PORT_PRIMARY = (1 << 0), ATA_PORT_SECONDARY = (1 << 1), + /* reset / recovery action types */ + ATA_EH_REVALIDATE = (1 << 0), + ATA_EH_SOFTRESET = (1 << 1), + ATA_EH_HARDRESET = (1 << 2), + + ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, + /* max repeat if error condition is still set after ->error_handler */ ATA_EH_MAX_REPEAT = 5, -- cgit v1.2.3-70-g09d2 From 88e490340ea4c3a2ebc0187a4339912e2fc1a081 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 15 May 2006 21:03:38 +0900 Subject: [PATCH] libata-ncq: add NCQ related ATA/libata constants and macros Add NCQ related ATA/libata constants and macros. Signed-off-by: Tejun Heo --- include/linux/ata.h | 9 +++++++++ include/linux/libata.h | 2 ++ 2 files changed, 11 insertions(+) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index 1cbeb434af9..c494e1c0531 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -133,6 +133,8 @@ enum { ATA_CMD_WRITE = 0xCA, ATA_CMD_WRITE_EXT = 0x35, ATA_CMD_WRITE_FUA_EXT = 0x3D, + ATA_CMD_FPDMA_READ = 0x60, + ATA_CMD_FPDMA_WRITE = 0x61, ATA_CMD_PIO_READ = 0x20, ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, @@ -151,6 +153,10 @@ enum { ATA_CMD_INIT_DEV_PARAMS = 0x91, ATA_CMD_READ_NATIVE_MAX = 0xF8, ATA_CMD_READ_NATIVE_MAX_EXT = 0x27, + ATA_CMD_READ_LOG_EXT = 0x2f, + + /* READ_LOG_EXT pages */ + ATA_LOG_SATA_NCQ = 0x10, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, @@ -221,6 +227,7 @@ enum ata_tf_protocols { ATA_PROT_NODATA, /* no data */ ATA_PROT_PIO, /* PIO single sector */ ATA_PROT_DMA, /* DMA */ + ATA_PROT_NCQ, /* NCQ */ ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ ATA_PROT_ATAPI_NODATA, /* packet command, no data */ ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */ @@ -276,6 +283,8 @@ struct ata_taskfile { #define ata_id_has_pm(id) ((id)[82] & (1 << 3)) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) +#define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) +#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) #define ata_id_has_dword_io(id) ((id)[50] & (1 << 0)) #define ata_id_u32(id,n) \ diff --git a/include/linux/libata.h b/include/linux/libata.h index db17723e23f..7c9e280a482 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -125,6 +125,7 @@ enum { ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */ ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */ ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */ + ATA_DFLAG_NCQ = (1 << 3), /* device supports NCQ */ ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ @@ -150,6 +151,7 @@ enum { ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */ ATA_FLAG_PIO_POLLING = (1 << 10), /* use polling PIO if LLD * doesn't handle PIO interrupts */ + ATA_FLAG_NCQ = (1 << 11), /* host supports NCQ */ ATA_FLAG_DEBUGMSG = (1 << 14), ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* flush port task */ -- cgit v1.2.3-70-g09d2 From 3057ac3c1a992ee135cbb7b7d1a12e58d81f0739 Mon Sep 17 00:00:00 2001 From: "zhao, forrest" Date: Mon, 12 Jun 2006 12:01:34 +0800 Subject: [PATCH] Snoop SET FEATURES - WRITE CACHE ENABLE/DISABLE command(v5) This patch makes libata snoop 'SET FEATURES - WRITE CACHE ENABLE/DISABLE' command, executing requisite revalidation processes to update cached data. Signed-off-by: Forrest Zhao Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 3 +++ drivers/scsi/libata-scsi.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 1 + include/linux/ata.h | 3 +++ 5 files changed, 44 insertions(+) (limited to 'include/linux/ata.h') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 51b3a0ddb23..ddaad1a4f1f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5194,6 +5194,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, INIT_WORK(&ap->port_task, NULL, NULL); INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); + INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index 6285257a890..f82799e2258 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -1554,6 +1554,9 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, if (rc) break; + /* schedule the scsi_rescan_device() here */ + queue_work(ata_aux_wq, &(ap->scsi_rescan_task)); + ehc->i.action &= ~ATA_EH_REVALIDATE; } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 5f90d8e3354..45a49be6504 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1306,6 +1306,17 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) u8 *cdb = cmd->cmnd; int need_sense = (qc->err_mask != 0); + /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and + * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE + * cache + */ + if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && + ((qc->tf.feature == SETFEATURES_WC_ON) || + (qc->tf.feature == SETFEATURES_WC_OFF))) { + qc->ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(qc->ap); + } + /* For ATA pass thru (SAT) commands, generate a sense block if * user mandated it or if there's an error. Note that if we * generate because the user forced us to, a check condition @@ -2992,3 +3003,28 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, return rc; } + +/** + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @data: Pointer to ATA port to perform scsi_rescan_device() + * + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_dev_rescan(void *data) +{ + struct ata_port *ap = data; + struct ata_device *dev; + unsigned int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_enabled(dev)) + scsi_rescan_device(&(dev->sdev->sdev_gendev)); + } +} + diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 1dd496f1f7a..bdd48889709 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -104,6 +104,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); +extern void ata_scsi_dev_rescan(void *data); /* libata-eh.c */ extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); diff --git a/include/linux/ata.h b/include/linux/ata.h index c494e1c0531..3671af86969 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -181,6 +181,9 @@ enum { XFER_PIO_0 = 0x08, XFER_PIO_SLOW = 0x00, + SETFEATURES_WC_ON = 0x02, /* Enable write cache */ + SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: -- cgit v1.2.3-70-g09d2