From 9d3dda5c0d092d6bc9911bf24de81350d47c6be6 Mon Sep 17 00:00:00 2001 From: Leilei Shang Date: Fri, 7 Jun 2013 14:38:17 +0800 Subject: i2c: pxa: enable high speed mode for i2c bus To enter high speed mode, following steps should be done: 1. When running in high speed mode, i2c clock rate is different from standard mode. Clock rate must be set according to specification first. 2. When i2c controller sends a master code and wins arbitration, high speed mode is entered. If you want to enable high speed mode, the following members of platform data should be set to proper value: 1. "high_mode" should be set to "1". 2. "master_code" should be set to "8'b 0000_1xxx"(x is 0 or 1). If no master_code is set, set to default value 0xe. 3. "rate" should be set according to specification. Signed-off-by: Leilei Shang Signed-off-by: Wolfram Sang --- include/linux/i2c/pxa-i2c.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/i2c') diff --git a/include/linux/i2c/pxa-i2c.h b/include/linux/i2c/pxa-i2c.h index 1a9f65e6ec0..53aab243cbd 100644 --- a/include/linux/i2c/pxa-i2c.h +++ b/include/linux/i2c/pxa-i2c.h @@ -67,6 +67,9 @@ struct i2c_pxa_platform_data { unsigned int class; unsigned int use_pio :1; unsigned int fast_mode :1; + unsigned int high_mode:1; + unsigned char master_code; + unsigned long rate; }; extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); -- cgit v1.2.3-70-g09d2