From 0f8d8ea64ec7c77ca5beb59534d386fe0235961a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 24 Aug 2010 13:20:26 +0300 Subject: mmc: Fixes for Dual Data Rate (DDR) support The DDR support patch needs the following fixes: - The block driver does not need to know about DDR, any more than it needs to know about bus width. - Not only the card must be switched to DDR mode. The host controller must also be configured, which is done through the 'set_ios()' function. - Do not set the DDR mode state until after the switch command is successful. - Setting block length is not supported in DDR mode. Make that a core function and change the other place it is used (mmc_test) also. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/mmc/host.h') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6711eb8715b..c4fb1c5efc4 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -50,6 +50,11 @@ struct mmc_ios { #define MMC_TIMING_LEGACY 0 #define MMC_TIMING_MMC_HS 1 #define MMC_TIMING_SD_HS 2 + + unsigned char ddr; /* dual data rate used */ + +#define MMC_SDR_MODE 0 +#define MMC_DDR_MODE 1 }; struct mmc_host_ops { -- cgit v1.2.3-70-g09d2