From 22efa0fee32d9e7f6f6fbc396a872b5708d86048 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Sat, 27 Nov 2010 00:11:55 +0000 Subject: sh, mmc: Use defines when setting CE_CLK_CTRL The 16-19th bits of CE_CLK_CTRL set the MMC clock frequency. Cc: Yusuke Goda Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- include/linux/mmc/sh_mmcif.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'include/linux/mmc') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 342ec1a3868..ffabf8c0a53 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -70,6 +70,9 @@ struct sh_mmcif_plat_data { #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ #define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) #define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) +#define CLKDIV_4 (1<<16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */ #define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ #define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ (1 << 9) | (1 << 8)) /* resp busy timeout */ @@ -178,14 +181,10 @@ static inline void sh_mmcif_boot_init(void __iomem *base) /* Set block size in MMCIF hardware */ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); - /* Enable the clock, set it to Bus clock/256 (about 325Khz). - * It is unclear where 0x70000 comes from or if it is even needed. - * It is there for byte-compatibility with code that is known to - * work. - */ + /* Enable the clock, set it to Bus clock/256 (about 325Khz). */ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, - CLK_ENABLE | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | - SCCSTO_29 | 0x70000); + CLK_ENABLE | CLKDIV_256 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD0 */ sh_mmcif_boot_cmd(base, 0x00000040, 0); @@ -210,7 +209,9 @@ static inline void sh_mmcif_boot_slurp(void __iomem *base, unsigned long tmp; /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ - sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff); + sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, + CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | + SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD9 - Get CSD */ sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); -- cgit v1.2.3-70-g09d2