From 0bc98cc6155205b615a9d29a2d54d1b839521c04 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Fri, 2 Nov 2012 20:18:11 +0100 Subject: power_supply: Add bq2415x charger driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bq2415x charger driver is needed for example on Nokia N900 for charging battery. Driver is part of open source project to replace proprietary battery management. Signed-off-by: Pali Rohár Signed-off-by: Anton Vorontsov --- include/linux/power/bq2415x_charger.h | 90 +++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 include/linux/power/bq2415x_charger.h (limited to 'include/linux/power/bq2415x_charger.h') diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h new file mode 100644 index 00000000000..fb6bf4d8aea --- /dev/null +++ b/include/linux/power/bq2415x_charger.h @@ -0,0 +1,90 @@ +/* + bq2415x_charger.h - bq2415x charger driver + Copyright (C) 2011-2012 Pali Rohár + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +*/ + +#ifndef BQ2415X_CHARGER_H +#define BQ2415X_CHARGER_H + +/* + This is platform data for bq2415x chip. It contains default board voltages + and currents which can be also later configured via sysfs. If value is -1 + then default chip value (specified in datasheet) will be used. + + Value resistor_sense is needed for for configuring charge and termination + current. It it is less or equal to zero, configuring charge and termination + current will not be possible. + + Function set_mode_hook is needed for automode (setting correct current limit + when charger is connected/disconnected or setting boost mode). When is NULL, + automode function is disabled. When is not NULL, it must have this prototype: + + int (*set_mode_hook)( + void (*hook)(enum bq2415x_mode mode, void *data), + void *data) + + hook is hook function (see below) and data is pointer to driver private data + + bq2415x driver will call it as: + + platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device); + + Board/platform function set_mode_hook return non zero value when hook + function was successful registered. Platform code should call that hook + function (which get from pointer, with data) every time when charger was + connected/disconnected or require to enable boost mode. bq2415x driver then + will set correct current limit, enable/disable charger or boost mode. + + Hook function has this prototype: + + void hook(enum bq2415x_mode mode, void *data); + + mode is bq2415x mode (charger or boost) + data is pointer to driver private data (which get from set_charger_type_hook) + + When bq driver is being unloaded, it call function: + + platform_data->set_mode_hook(NULL, NULL); + + (hook function and driver private data are NULL) + + After that board/platform code must not call driver hook function! It is + possible that pointer to hook function will not be valid and calling will + cause undefined result. + +*/ + +/* Supported modes with maximal current limit */ +enum bq2415x_mode { + BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */ + BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */ + BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */ + BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */ +}; + +struct bq2415x_platform_data { + int current_limit; /* mA */ + int weak_battery_voltage; /* mV */ + int battery_regulation_voltage; /* mV */ + int charge_current; /* mA */ + int termination_current; /* mA */ + int resistor_sense; /* m ohm */ + int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data), + void *data); +}; + +#endif -- cgit v1.2.3-70-g09d2