From 00c877c69ba315d6c565a4df51c71b11e82cdeb8 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 18 Sep 2013 18:18:02 +0530 Subject: regulator: core: add support for configuring turn-on time through constraints The turn-on time of the regulator depends on the regulator device's electrical characteristics. Sometimes regulator turn-on time also depends on the capacitive load on the given platform and it can be more than the datasheet value. The driver provides the enable-time as per datasheet. Add support for configure the enable ramp time through regulator constraints so that regulator core can take this value for enable time for that regulator. Signed-off-by: Laxman Dewangan Acked-by: Stephen Warren Signed-off-by: Mark Brown --- include/linux/regulator/machine.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/regulator/machine.h') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 999b20ce06c..8108751acb8 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -95,6 +95,7 @@ struct regulator_state { * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. * @ramp_delay: Time to settle down after voltage change (unit: uV/us) + * @enable_time: Turn-on time of the rails (unit: microseconds) */ struct regulation_constraints { @@ -129,6 +130,7 @@ struct regulation_constraints { unsigned int initial_mode; unsigned int ramp_delay; + unsigned int enable_time; /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ -- cgit v1.2.3-70-g09d2