From de4217d90fed1b1714a270ceb5d092f7314e8bda Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Tue, 4 Sep 2012 14:25:58 +0530 Subject: usb: otg: Move phy interface to separate file. As otg.h is containing lots of phy interface related stuff, moving all phy interface related stuff to new file named phy.h Signed-off-by: Venu Byravarasu Signed-off-by: Felipe Balbi --- include/linux/usb/otg.h | 198 +----------------------------------------------- 1 file changed, 1 insertion(+), 197 deletions(-) (limited to 'include/linux/usb/otg.h') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 16dc520dfba..65a2b6afe02 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -9,7 +9,7 @@ #ifndef __LINUX_USB_OTG_H #define __LINUX_USB_OTG_H -#include +#include /* OTG defines lots of enumeration states before device reset */ enum usb_otg_state { @@ -35,31 +35,6 @@ enum usb_otg_state { OTG_STATE_A_VBUS_ERR, }; -enum usb_phy_events { - USB_EVENT_NONE, /* no events or cable disconnected */ - USB_EVENT_VBUS, /* vbus valid event */ - USB_EVENT_ID, /* id was grounded */ - USB_EVENT_CHARGER, /* usb dedicated charger */ - USB_EVENT_ENUMERATED, /* gadget driver enumerated */ -}; - -/* associate a type with PHY */ -enum usb_phy_type { - USB_PHY_TYPE_UNDEFINED, - USB_PHY_TYPE_USB2, - USB_PHY_TYPE_USB3, -}; - -struct usb_phy; - -/* for transceivers connected thru an ULPI interface, the user must - * provide access ops - */ -struct usb_phy_io_ops { - int (*read)(struct usb_phy *x, u32 reg); - int (*write)(struct usb_phy *x, u32 val, u32 reg); -}; - struct usb_otg { u8 default_a; @@ -85,120 +60,9 @@ struct usb_otg { }; -/* - * the otg driver needs to interact with both device side and host side - * usb controllers. it decides which controller is active at a given - * moment, using the transceiver, ID signal, HNP and sometimes static - * configuration information (including "board isn't wired for otg"). - */ -struct usb_phy { - struct device *dev; - const char *label; - unsigned int flags; - - enum usb_phy_type type; - enum usb_otg_state state; - enum usb_phy_events last_event; - - struct usb_otg *otg; - - struct device *io_dev; - struct usb_phy_io_ops *io_ops; - void __iomem *io_priv; - - /* for notification of usb_phy_events */ - struct atomic_notifier_head notifier; - - /* to pass extra port status to the root hub */ - u16 port_status; - u16 port_change; - - /* to support controllers that have multiple transceivers */ - struct list_head head; - - /* initialize/shutdown the OTG controller */ - int (*init)(struct usb_phy *x); - void (*shutdown)(struct usb_phy *x); - - /* effective for B devices, ignored for A-peripheral */ - int (*set_power)(struct usb_phy *x, - unsigned mA); - - /* for non-OTG B devices: set transceiver into suspend mode */ - int (*set_suspend)(struct usb_phy *x, - int suspend); - - /* notify phy connect status change */ - int (*notify_connect)(struct usb_phy *x, int port); - int (*notify_disconnect)(struct usb_phy *x, int port); -}; - - -/* for board-specific init logic */ -extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); -extern void usb_remove_phy(struct usb_phy *); - -/* helpers for direct access thru low-level io interface */ -static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) -{ - if (x->io_ops && x->io_ops->read) - return x->io_ops->read(x, reg); - - return -EINVAL; -} - -static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) -{ - if (x->io_ops && x->io_ops->write) - return x->io_ops->write(x, val, reg); - - return -EINVAL; -} - -static inline int -usb_phy_init(struct usb_phy *x) -{ - if (x->init) - return x->init(x); - - return 0; -} - -static inline void -usb_phy_shutdown(struct usb_phy *x) -{ - if (x->shutdown) - x->shutdown(x); -} - -/* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_phy(enum usb_phy_type type); -extern struct usb_phy *devm_usb_get_phy(struct device *dev, - enum usb_phy_type type); -extern void usb_put_phy(struct usb_phy *); -extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) -{ - return NULL; -} - -static inline struct usb_phy *devm_usb_get_phy(struct device *dev, - enum usb_phy_type type) -{ - return NULL; -} - -static inline void usb_put_phy(struct usb_phy *x) -{ -} - -static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) -{ -} - static inline const char *otg_state_string(enum usb_otg_state state) { return NULL; @@ -247,42 +111,6 @@ otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph) return -ENOTSUPP; } -static inline int -usb_phy_set_power(struct usb_phy *x, unsigned mA) -{ - if (x && x->set_power) - return x->set_power(x, mA); - return 0; -} - -/* Context: can sleep */ -static inline int -usb_phy_set_suspend(struct usb_phy *x, int suspend) -{ - if (x->set_suspend != NULL) - return x->set_suspend(x, suspend); - else - return 0; -} - -static inline int -usb_phy_notify_connect(struct usb_phy *x, int port) -{ - if (x->notify_connect) - return x->notify_connect(x, port); - else - return 0; -} - -static inline int -usb_phy_notify_disconnect(struct usb_phy *x, int port) -{ - if (x->notify_disconnect) - return x->notify_disconnect(x, port); - else - return 0; -} - static inline int otg_start_srp(struct usb_otg *otg) { @@ -292,31 +120,7 @@ otg_start_srp(struct usb_otg *otg) return -ENOTSUPP; } -/* notifiers */ -static inline int -usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) -{ - return atomic_notifier_chain_register(&x->notifier, nb); -} - -static inline void -usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) -{ - atomic_notifier_chain_unregister(&x->notifier, nb); -} - /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); -static inline const char *usb_phy_type_string(enum usb_phy_type type) -{ - switch (type) { - case USB_PHY_TYPE_USB2: - return "USB2 PHY"; - case USB_PHY_TYPE_USB3: - return "USB3 PHY"; - default: - return "UNKNOWN PHY TYPE"; - } -} #endif /* __LINUX_USB_OTG_H */ -- cgit v1.2.3-70-g09d2