From 49809d6a511960e5ccfb85b780894f45ac119065 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 7 Jun 2009 12:10:39 -0300 Subject: V4L/DVB (11970): gspca - ov519: Add support for the ov518 bridge. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/videodev2.h') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index ebb2ea6b499..f24eceecc5a 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -347,7 +347,8 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ #define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ -#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ +#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ /* * F O R M A T E N U M E R A T I O N -- cgit v1.2.3-70-g09d2 From 02ab18b0f497bed623814677577b76cc97234085 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2009 04:32:04 -0300 Subject: V4L/DVB (12072): gspca-ov519: add extra controls This patch adds autobrightness (so that it can be turned off to make the already present brightness control work) and light frequency filtering controls. The lightfreq control needed 2 different entries in the ctrls array, as the number of options differs depending on the sensor. Always one of the 2 entires is disabled ofcourse. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 214 ++++++++++++++++++++++++++++++++++++-- include/linux/videodev2.h | 3 +- 2 files changed, 207 insertions(+), 10 deletions(-) (limited to 'include/linux/videodev2.h') diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 188866ac6ce..baa488dd33d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -65,6 +65,8 @@ struct sd { __u8 colors; __u8 hflip; __u8 vflip; + __u8 autobrightness; + __u8 freq; __u8 stopped; /* Streaming is temporarily paused */ @@ -94,11 +96,17 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static void setbrightness(struct gspca_dev *gspca_dev); static void setcontrast(struct gspca_dev *gspca_dev); static void setcolors(struct gspca_dev *gspca_dev); +static void setautobrightness(struct sd *sd); +static void setfreq(struct sd *sd); -static struct ctrl sd_ctrls[] = { +static const struct ctrl sd_ctrls[] = { { { .id = V4L2_CID_BRIGHTNESS, @@ -141,7 +149,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, -/* next controls work with ov7670 only */ +/* The flip controls work with ov7670 only */ #define HFLIP_IDX 3 { { @@ -172,6 +180,51 @@ static struct ctrl sd_ctrls[] = { .set = sd_setvflip, .get = sd_getvflip, }, +#define AUTOBRIGHT_IDX 5 + { + { + .id = V4L2_CID_AUTOBRIGHTNESS, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Brightness", + .minimum = 0, + .maximum = 1, + .step = 1, +#define AUTOBRIGHT_DEF 1 + .default_value = AUTOBRIGHT_DEF, + }, + .set = sd_setautobrightness, + .get = sd_getautobrightness, + }, +#define FREQ_IDX 6 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 0 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, +#define OV7670_FREQ_IDX 7 + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 3, /* 0: 0, 1: 50Hz, 2:60Hz 3: Auto Hz */ + .step = 1, +#define OV7670_FREQ_DEF 3 + .default_value = OV7670_FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; static const struct v4l2_pix_format ov519_vga_mode[] = { @@ -416,7 +469,7 @@ static const struct ov_i2c_regvals norm_6x30[] = { { 0x07, 0x2d }, /* Sharpness */ { 0x0c, 0x20 }, { 0x0d, 0x20 }, - { 0x0e, 0x20 }, + { 0x0e, 0xa0 }, /* Was 0x20, bit7 enables a 2x gain which we need */ { 0x0f, 0x05 }, { 0x10, 0x9a }, { 0x11, 0x00 }, /* Pixel clock = fastest */ @@ -1659,9 +1712,21 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; - if (sd->sensor != SEN_OV7670) - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) - | (1 << VFLIP_IDX); + sd->autobrightness = AUTOBRIGHT_DEF; + if (sd->sensor == SEN_OV7670) { + sd->freq = OV7670_FREQ_DEF; + gspca_dev->ctrl_dis = 1 << FREQ_IDX; + } else { + sd->freq = FREQ_DEF; + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | + (1 << OV7670_FREQ_IDX); + } + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX; + /* OV8610 Frequency filter control should work but needs testing */ + if (sd->sensor == SEN_OV8610) + gspca_dev->ctrl_dis |= 1 << FREQ_IDX; + return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); @@ -2233,7 +2298,6 @@ static int set_ov_sensor_window(struct sd *sd) msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - sethvflip(sd); } else { i2c_w(sd, 0x17, hwsbase); i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); @@ -2268,6 +2332,9 @@ static int sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setbrightness(gspca_dev); setcolors(gspca_dev); + sethvflip(sd); + setautobrightness(sd); + setfreq(sd); ret = ov51x_restart(sd); if (ret < 0) @@ -2394,8 +2461,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) break; case SEN_OV7620: /* 7620 doesn't like manual changes when in auto mode */ -/*fixme - * if (!sd->auto_brt) */ + if (!sd->autobrightness) i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7670: @@ -2482,6 +2548,70 @@ static void setcolors(struct gspca_dev *gspca_dev) } } +static void setautobrightness(struct sd *sd) +{ + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + return; + + i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10); +} + +static void setfreq(struct sd *sd) +{ + if (sd->sensor == SEN_OV7670) { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT); + break; + case 1: /* 50 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18); + break; + case 2: /* 60 hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18); + break; + case 3: /* Auto hz */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT, + OV7670_COM8_BFILT); + i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO, + 0x18); + break; + } + } else { + switch (sd->freq) { + case 0: /* Banding filter disabled */ + i2c_w_mask(sd, 0x2d, 0x00, 0x04); + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + break; + case 1: /* 50 hz (filter on and framerate adj) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + /* 20 fps -> 16.667 fps */ + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630) + i2c_w(sd, 0x2b, 0x5e); + else + i2c_w(sd, 0x2b, 0xac); + break; + case 2: /* 60 hz (filter on, ...) */ + i2c_w_mask(sd, 0x2d, 0x04, 0x04); + if (sd->sensor == SEN_OV6620 || + sd->sensor == SEN_OV6630) { + /* 20 fps -> 15 fps */ + i2c_w_mask(sd, 0x2a, 0x80, 0x80); + i2c_w(sd, 0x2b, 0xa8); + } else { + /* no framerate adj. */ + i2c_w_mask(sd, 0x2a, 0x00, 0x80); + } + break; + } + } +} + static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -2572,6 +2702,71 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setautobrightness(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->autobrightness = val; + if (gspca_dev->streaming) + setautobrightness(sd); + return 0; +} + +static int sd_getautobrightness(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->autobrightness; + return 0; +} + +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(sd); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + case 3: + if (sd->sensor != SEN_OV7670) + return -EINVAL; + + strcpy((char *) menu->name, "Automatic"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2582,6 +2777,7 @@ static const struct sd_desc sd_desc = { .start = sd_start, .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index f24eceecc5a..772d226cb5c 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -894,9 +894,10 @@ enum v4l2_colorfx { V4L2_COLORFX_BW = 1, V4L2_COLORFX_SEPIA = 2, }; +#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+32) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+33) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) -- cgit v1.2.3-70-g09d2 From 1876bb923c98c605eca69f0bfe295f7b5f5eba28 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2009 06:45:50 -0300 Subject: V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge gspca_ov519: add support for the ov511 bridge Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 533 +++++++++++++++++++++++++++++++++++++- include/linux/videodev2.h | 1 + 2 files changed, 521 insertions(+), 13 deletions(-) (limited to 'include/linux/videodev2.h') diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 9d4b69dbf96..1f8e2613ecc 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -76,8 +76,8 @@ struct sd { __u8 stopped; /* Streaming is temporarily paused */ - __u8 frame_rate; /* current Framerate (OV519 only) */ - __u8 clockdiv; /* clockdiv override for OV519 only */ + __u8 frame_rate; /* current Framerate */ + __u8 clockdiv; /* clockdiv override */ char sensor; /* Type of image sensor chip (SEN_*) */ #define SEN_UNKNOWN 0 @@ -304,17 +304,77 @@ static const struct v4l2_pix_format ov518_sif_mode[] = { .priv = 0}, }; +static const struct v4l2_pix_format ov511_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 2, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; +static const struct v4l2_pix_format ov511_sif_mode[] = { + {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 40000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 40000, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 3, + .colorspace = V4L2_COLORSPACE_JPEG, + .priv = 0}, +}; /* Registers common to OV511 / OV518 */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ #define R51x_SYS_RESET 0x50 + /* Reset type flags */ + #define OV511_RESET_OMNICE 0x08 #define R51x_SYS_INIT 0x53 #define R51x_SYS_SNAP 0x52 #define R51x_SYS_CUST_ID 0x5F #define R51x_COMP_LUT_BEGIN 0x80 /* OV511 Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_FIFO_OPTS 0x31 +#define R511_I2C_CTL 0x40 #define R511_SYS_LED_CTL 0x55 /* OV511+ only */ -#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */ +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 /* OV518 Camera interface register numbers */ #define R518_GPIO_OUT 0x56 /* OV518(+) only */ @@ -1079,13 +1139,128 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n) return ret; } +static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + int rc, retries; + + PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg); + + /* Three byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(sd, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + if (--retries < 0) { + PDEBUG(D_USBO, "i2c write retries exhausted"); + return -1; + } + } + + return 0; +} + +static int ov511_i2c_r(struct sd *sd, __u8 reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = 6; ; ) { + /* Select camera register */ + rc = reg_w(sd, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(sd, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = 6; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + do + rc = reg_r(sd, R511_I2C_CTL); + while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */ + + if (rc < 0) + return rc; + + if ((rc & 2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(sd, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + PDEBUG(D_USBI, "i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(sd, R51x_I2C_DATA); + + PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(sd, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} /* * The OV518 I2C I/O procedure is different, hence, this function. * This is normally only called from i2c_w(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_w(struct sd *sd, +static int ov518_i2c_w(struct sd *sd, __u8 reg, __u8 value) { @@ -1120,7 +1295,7 @@ static int i2c_w(struct sd *sd, * This is normally only called from i2c_r(). Note that this function * always succeeds regardless of whether the sensor is present and working. */ -static int i2c_r(struct sd *sd, __u8 reg) +static int ov518_i2c_r(struct sd *sd, __u8 reg) { int rc, value; @@ -1143,6 +1318,34 @@ static int i2c_r(struct sd *sd, __u8 reg) return value; } +static int i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_w(sd, reg, value); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_w(sd, reg, value); + } + return -1; /* Should never happen */ +} + +static int i2c_r(struct sd *sd, __u8 reg) +{ + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + return ov511_i2c_r(sd, reg); + case BRIDGE_OV518: + case BRIDGE_OV518PLUS: + case BRIDGE_OV519: + return ov518_i2c_r(sd, reg); + } + return -1; /* Should never happen */ +} + /* Writes bits at positions specified by mask to an I2C reg. Bits that are in * the same position as 1's in "mask" are cleared and set to "value". Bits * that are in the same position as 0's in "mask" are preserved, regardless @@ -1490,9 +1693,31 @@ static void ov51x_led_control(struct sd *sd, int on) } } -/* OV518 quantization tables are 8x4 (instead of 8x8) */ -static int ov518_upload_quan_tables(struct sd *sd) +static int ov51x_upload_quan_tables(struct sd *sd) { + const unsigned char yQuanTable511[] = { + 0, 1, 1, 2, 2, 3, 3, 4, + 1, 1, 1, 2, 2, 3, 4, 4, + 1, 1, 2, 2, 3, 4, 4, 4, + 2, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 5, 5, 5, + 3, 3, 4, 4, 5, 5, 5, 5, + 3, 4, 4, 4, 5, 5, 5, 5, + 4, 4, 4, 4, 5, 5, 5, 5 + }; + + const unsigned char uvQuanTable511[] = { + 0, 2, 2, 3, 4, 4, 4, 4, + 2, 2, 2, 4, 4, 4, 4, 4, + 2, 2, 3, 4, 4, 4, 4, 4, + 3, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + }; + + /* OV518 quantization tables are 8x4 (instead of 8x8) */ const unsigned char yQuanTable518[] = { 5, 4, 5, 6, 6, 7, 7, 7, 5, 5, 5, 5, 6, 7, 7, 7, @@ -1507,14 +1732,23 @@ static int ov518_upload_quan_tables(struct sd *sd) 7, 7, 7, 7, 7, 7, 8, 8 }; - const unsigned char *pYTable = yQuanTable518; - const unsigned char *pUVTable = uvQuanTable518; + const unsigned char *pYTable, *pUVTable; unsigned char val0, val1; - int i, rc, reg = R51x_COMP_LUT_BEGIN; + int i, size, rc, reg = R51x_COMP_LUT_BEGIN; PDEBUG(D_PROBE, "Uploading quantization tables"); - for (i = 0; i < 16; i++) { + if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) { + pYTable = yQuanTable511; + pUVTable = uvQuanTable511; + size = 32; + } else { + pYTable = yQuanTable518; + pUVTable = uvQuanTable518; + size = 16; + } + + for (i = 0; i < size; i++) { val0 = *pYTable++; val1 = *pYTable++; val0 &= 0x0f; @@ -1529,7 +1763,7 @@ static int ov518_upload_quan_tables(struct sd *sd) val0 &= 0x0f; val1 &= 0x0f; val0 |= val1 << 4; - rc = reg_w(sd, reg + 16, val0); + rc = reg_w(sd, reg + size, val0); if (rc < 0) return rc; @@ -1539,6 +1773,87 @@ static int ov518_upload_quan_tables(struct sd *sd) return 0; } +/* This initializes the OV511/OV511+ and the sensor */ +static int ov511_configure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int rc; + + /* For 511 and 511+ */ + const struct ov_regvals init_511[] = { + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x7f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3f }, + { R51x_SYS_INIT, 0x01 }, + { R51x_SYS_RESET, 0x3d }, + }; + + const struct ov_regvals norm_511[] = { + { R511_DRAM_FLOW_CTL, 0x01 }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0x1f }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals norm_511_p[] = { + { R511_DRAM_FLOW_CTL, 0xff }, + { R51x_SYS_SNAP, 0x00 }, + { R51x_SYS_SNAP, 0x02 }, + { R51x_SYS_SNAP, 0x00 }, + { R511_FIFO_OPTS, 0xff }, + { R511_COMP_EN, 0x00 }, + { R511_COMP_LUT_EN, 0x03 }, + }; + + const struct ov_regvals compress_511[] = { + { 0x70, 0x1f }, + { 0x71, 0x05 }, + { 0x72, 0x06 }, + { 0x73, 0x06 }, + { 0x74, 0x14 }, + { 0x75, 0x03 }, + { 0x76, 0x04 }, + { 0x77, 0x04 }, + }; + + PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID)); + + rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511)); + if (rc < 0) + return rc; + + switch (sd->bridge) { + case BRIDGE_OV511: + rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511)); + if (rc < 0) + return rc; + break; + case BRIDGE_OV511PLUS: + rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p)); + if (rc < 0) + return rc; + break; + } + + /* Init compression */ + rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511)); + if (rc < 0) + return rc; + + rc = ov51x_upload_quan_tables(sd); + if (rc < 0) { + PDEBUG(D_ERR, "Error uploading quantization tables"); + return rc; + } + + return 0; +} + /* This initializes the OV518/OV518+ and the sensor */ static int ov518_configure(struct gspca_dev *gspca_dev) { @@ -1615,7 +1930,7 @@ static int ov518_configure(struct gspca_dev *gspca_dev) break; } - rc = ov518_upload_quan_tables(sd); + rc = ov51x_upload_quan_tables(sd); if (rc < 0) { PDEBUG(D_ERR, "Error uploading quantization tables"); return rc; @@ -1661,6 +1976,10 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->invert_led = id->driver_info & BRIDGE_INVERT_LED; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_configure(gspca_dev); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: ret = ov518_configure(gspca_dev); @@ -1719,6 +2038,16 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + if (!sd->sif) { + cam->cam_mode = ov511_vga_mode; + cam->nmodes = ARRAY_SIZE(ov511_vga_mode); + } else { + cam->cam_mode = ov511_sif_mode; + cam->nmodes = ARRAY_SIZE(ov511_sif_mode); + } + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: if (!sd->sif) { @@ -1810,6 +2139,126 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int ov511_mode_init_regs(struct sd *sd) +{ + int hsegs, vsegs, packet_size, fps, needed; + int interlaced = 0; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5); + + reg_w(sd, R511_CAM_UV_EN, 0x01); + reg_w(sd, R511_SNAP_UV_EN, 0x01); + reg_w(sd, R511_SNAP_OPTS, 0x03); + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (sd->gspca_dev.width >> 3) - 1; + vsegs = (sd->gspca_dev.height >> 3) - 1; + + reg_w(sd, R511_CAM_PXCNT, hsegs); + reg_w(sd, R511_CAM_LNCNT, vsegs); + reg_w(sd, R511_CAM_PXDIV, 0x00); + reg_w(sd, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(sd, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(sd, R511_SNAP_PXCNT, hsegs); + reg_w(sd, R511_SNAP_LNCNT, vsegs); + reg_w(sd, R511_SNAP_PXDIV, 0x00); + reg_w(sd, R511_SNAP_LNDIV, 0x00); + + /******** Set the framerate ********/ + if (frame_rate > 0) + sd->frame_rate = frame_rate; + + switch (sd->sensor) { + case SEN_OV6620: + /* No framerate control, doesn't like higher rates yet */ + sd->clockdiv = 3; + break; + + /* Note once the FIXME's in mode_init_ov_sensor_regs() are fixed + for more sensors we need to do this for them too */ + case SEN_OV7620: + case SEN_OV7640: + if (sd->gspca_dev.width == 320) + interlaced = 1; + /* Fall through */ + case SEN_OV6630: + case SEN_OV76BE: + case SEN_OV7610: + case SEN_OV7670: + switch (sd->frame_rate) { + case 30: + case 25: + /* Not enough bandwidth to do 640x480 @ 30 fps */ + if (sd->gspca_dev.width != 640) { + sd->clockdiv = 0; + break; + } + /* Fall through for 640x480 case */ + default: +/* case 20: */ +/* case 15: */ + sd->clockdiv = 1; + break; + case 10: + sd->clockdiv = 2; + break; + case 5: + sd->clockdiv = 5; + break; + } + if (interlaced) { + sd->clockdiv = (sd->clockdiv + 1) * 2 - 1; + /* Higher then 10 does not work */ + if (sd->clockdiv > 10) + sd->clockdiv = 10; + } + break; + + case SEN_OV8610: + /* No framerate control ?? */ + sd->clockdiv = 0; + break; + } + + /* Check if we have enough bandwidth to disable compression */ + fps = (interlaced ? 60 : 30) / (sd->clockdiv + 1) + 1; + needed = fps * sd->gspca_dev.width * sd->gspca_dev.height * 3 / 2; + /* 1400 is a conservative estimate of the max nr of isoc packets/sec */ + if (needed > 1400 * packet_size) { + /* Enable Y and UV quantization and compression */ + reg_w(sd, R511_COMP_EN, 0x07); + reg_w(sd, R511_COMP_LUT_EN, 0x03); + } else { + reg_w(sd, R511_COMP_EN, 0x06); + reg_w(sd, R511_COMP_LUT_EN, 0x00); + } + + reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE); + reg_w(sd, R51x_SYS_RESET, 0); + + return 0; +} + /* Sets up the OV518/OV518+ with the given image parameters * * OV518 needs a completely different approach, until we can figure out what @@ -2363,6 +2812,10 @@ static int sd_start(struct gspca_dev *gspca_dev) int ret = 0; switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + ret = ov511_mode_init_regs(sd); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: ret = ov518_mode_init_regs(sd); @@ -2403,6 +2856,56 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control(sd, 0); } +static void ov511_pkt_scan(struct gspca_dev *gspca_dev, + struct gspca_frame *frame, /* target */ + __u8 *in, /* isoc packet */ + int len) /* iso packet length */ +{ + struct sd *sd = (struct sd *) gspca_dev; + + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + if (!(in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) && + (in[8] & 0x08)) { + if (in[8] & 0x80) { + /* Frame end */ + if ((in[9] + 1) * 8 != gspca_dev->width || + (in[10] + 1) * 8 != gspca_dev->height) { + PDEBUG(D_ERR, "Invalid frame size, got: %dx%d," + " requested: %dx%d\n", + (in[9] + 1) * 8, (in[10] + 1) * 8, + gspca_dev->width, gspca_dev->height); + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + /* Add 11 byte footer to frame, might be usefull */ + gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11); + return; + } else { + /* Frame start */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0); + sd->packet_nr = 0; + } + } + + /* Ignore the packet number */ + len--; + + /* intermediate packet */ + gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len); +} + static void ov518_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -2495,6 +2998,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: + ov511_pkt_scan(gspca_dev, frame, data, len); break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: @@ -2862,12 +3366,15 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x054c, 0x0155), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 }, {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS }, {USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS }, + {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS }, {} }; diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 772d226cb5c..8a025d51090 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -348,6 +348,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ #define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ +#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ /* -- cgit v1.2.3-70-g09d2