From a056ab8c7a00a0ffc52e9573bf01257004c2d08c Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 16 Apr 2010 19:01:02 +0300 Subject: HSI: hsi: Introducing HSI framework Adds HSI framework in to the linux kernel. High Speed Synchronous Serial Interface (HSI) is a serial interface mainly used for connecting application engines (APE) with cellular modem engines (CMT) in cellular handsets. HSI provides multiplexing for up to 16 logical channels, low-latency and full duplex communication. Signed-off-by: Carlos Chinea Acked-by: Linus Walleij --- include/linux/hsi/hsi.h | 410 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 410 insertions(+) create mode 100644 include/linux/hsi/hsi.h (limited to 'include/linux') diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h new file mode 100644 index 00000000000..4b178067f40 --- /dev/null +++ b/include/linux/hsi/hsi.h @@ -0,0 +1,410 @@ +/* + * HSI core header file. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_H__ +#define __LINUX_HSI_H__ + +#include +#include +#include +#include +#include +#include + +/* HSI message ttype */ +#define HSI_MSG_READ 0 +#define HSI_MSG_WRITE 1 + +/* HSI configuration values */ +enum { + HSI_MODE_STREAM = 1, + HSI_MODE_FRAME, +}; + +enum { + HSI_FLOW_SYNC, /* Synchronized flow */ + HSI_FLOW_PIPE, /* Pipelined flow */ +}; + +enum { + HSI_ARB_RR, /* Round-robin arbitration */ + HSI_ARB_PRIO, /* Channel priority arbitration */ +}; + +#define HSI_MAX_CHANNELS 16 + +/* HSI message status codes */ +enum { + HSI_STATUS_COMPLETED, /* Message transfer is completed */ + HSI_STATUS_PENDING, /* Message pending to be read/write (POLL) */ + HSI_STATUS_PROCEEDING, /* Message transfer is ongoing */ + HSI_STATUS_QUEUED, /* Message waiting to be served */ + HSI_STATUS_ERROR, /* Error when message transfer was ongoing */ +}; + +/* HSI port event codes */ +enum { + HSI_EVENT_START_RX, + HSI_EVENT_STOP_RX, +}; + +/** + * struct hsi_config - Configuration for RX/TX HSI modules + * @mode: Bit transmission mode (STREAM or FRAME) + * @channels: Number of channels to use [1..16] + * @speed: Max bit transmission speed (Kbit/s) + * @flow: RX flow type (SYNCHRONIZED or PIPELINE) + * @arb_mode: Arbitration mode for TX frame (Round robin, priority) + */ +struct hsi_config { + unsigned int mode; + unsigned int channels; + unsigned int speed; + union { + unsigned int flow; /* RX only */ + unsigned int arb_mode; /* TX only */ + }; +}; + +/** + * struct hsi_board_info - HSI client board info + * @name: Name for the HSI device + * @hsi_id: HSI controller id where the client sits + * @port: Port number in the controller where the client sits + * @tx_cfg: HSI TX configuration + * @rx_cfg: HSI RX configuration + * @platform_data: Platform related data + * @archdata: Architecture-dependent device data + */ +struct hsi_board_info { + const char *name; + unsigned int hsi_id; + unsigned int port; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + void *platform_data; + struct dev_archdata *archdata; +}; + +#ifdef CONFIG_HSI_BOARDINFO +extern int hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len); +#else +static inline int hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len) +{ + return 0; +} +#endif /* CONFIG_HSI_BOARDINFO */ + +/** + * struct hsi_client - HSI client attached to an HSI port + * @device: Driver model representation of the device + * @tx_cfg: HSI TX configuration + * @rx_cfg: HSI RX configuration + * @hsi_start_rx: Called after incoming wake line goes high + * @hsi_stop_rx: Called after incoming wake line goes low + */ +struct hsi_client { + struct device device; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + void (*hsi_start_rx)(struct hsi_client *cl); + void (*hsi_stop_rx)(struct hsi_client *cl); + /* private: */ + unsigned int pclaimed:1; + struct list_head link; +}; + +#define to_hsi_client(dev) container_of(dev, struct hsi_client, device) + +static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data) +{ + dev_set_drvdata(&cl->device, data); +} + +static inline void *hsi_client_drvdata(struct hsi_client *cl) +{ + return dev_get_drvdata(&cl->device); +} + +/** + * struct hsi_client_driver - Driver associated to an HSI client + * @driver: Driver model representation of the driver + */ +struct hsi_client_driver { + struct device_driver driver; +}; + +#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\ + driver) + +int hsi_register_client_driver(struct hsi_client_driver *drv); + +static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv) +{ + driver_unregister(&drv->driver); +} + +/** + * struct hsi_msg - HSI message descriptor + * @link: Free to use by the current descriptor owner + * @cl: HSI device client that issues the transfer + * @sgt: Head of the scatterlist array + * @context: Client context data associated to the transfer + * @complete: Transfer completion callback + * @destructor: Destructor to free resources when flushing + * @status: Status of the transfer when completed + * @actual_len: Actual length of data transfered on completion + * @channel: Channel were to TX/RX the message + * @ttype: Transfer type (TX if set, RX otherwise) + * @break_frame: if true HSI will send/receive a break frame. Data buffers are + * ignored in the request. + */ +struct hsi_msg { + struct list_head link; + struct hsi_client *cl; + struct sg_table sgt; + void *context; + + void (*complete)(struct hsi_msg *msg); + void (*destructor)(struct hsi_msg *msg); + + int status; + unsigned int actual_len; + unsigned int channel; + unsigned int ttype:1; + unsigned int break_frame:1; +}; + +struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags); +void hsi_free_msg(struct hsi_msg *msg); + +/** + * struct hsi_port - HSI port device + * @device: Driver model representation of the device + * @tx_cfg: Current TX path configuration + * @rx_cfg: Current RX path configuration + * @num: Port number + * @shared: Set when port can be shared by different clients + * @claimed: Reference count of clients which claimed the port + * @lock: Serialize port claim + * @async: Asynchronous transfer callback + * @setup: Callback to set the HSI client configuration + * @flush: Callback to clean the HW state and destroy all pending transfers + * @start_tx: Callback to inform that a client wants to TX data + * @stop_tx: Callback to inform that a client no longer wishes to TX data + * @release: Callback to inform that a client no longer uses the port + * @clients: List of hsi_clients using the port. + * @clock: Lock to serialize access to the clients list. + */ +struct hsi_port { + struct device device; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + unsigned int num; + unsigned int shared:1; + int claimed; + struct mutex lock; + int (*async)(struct hsi_msg *msg); + int (*setup)(struct hsi_client *cl); + int (*flush)(struct hsi_client *cl); + int (*start_tx)(struct hsi_client *cl); + int (*stop_tx)(struct hsi_client *cl); + int (*release)(struct hsi_client *cl); + struct list_head clients; + spinlock_t clock; +}; + +#define to_hsi_port(dev) container_of(dev, struct hsi_port, device) +#define hsi_get_port(cl) to_hsi_port((cl)->device.parent) + +void hsi_event(struct hsi_port *port, unsigned int event); +int hsi_claim_port(struct hsi_client *cl, unsigned int share); +void hsi_release_port(struct hsi_client *cl); + +static inline int hsi_port_claimed(struct hsi_client *cl) +{ + return cl->pclaimed; +} + +static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data) +{ + dev_set_drvdata(&port->device, data); +} + +static inline void *hsi_port_drvdata(struct hsi_port *port) +{ + return dev_get_drvdata(&port->device); +} + +/** + * struct hsi_controller - HSI controller device + * @device: Driver model representation of the device + * @owner: Pointer to the module owning the controller + * @id: HSI controller ID + * @num_ports: Number of ports in the HSI controller + * @port: Array of HSI ports + */ +struct hsi_controller { + struct device device; + struct module *owner; + unsigned int id; + unsigned int num_ports; + struct hsi_port *port; +}; + +#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device) + +struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags); +void hsi_free_controller(struct hsi_controller *hsi); +int hsi_register_controller(struct hsi_controller *hsi); +void hsi_unregister_controller(struct hsi_controller *hsi); + +static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi, + void *data) +{ + dev_set_drvdata(&hsi->device, data); +} + +static inline void *hsi_controller_drvdata(struct hsi_controller *hsi) +{ + return dev_get_drvdata(&hsi->device); +} + +static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi, + unsigned int num) +{ + return (num < hsi->num_ports) ? &hsi->port[num] : NULL; +} + +/* + * API for HSI clients + */ +int hsi_async(struct hsi_client *cl, struct hsi_msg *msg); + +/** + * hsi_id - Get HSI controller ID associated to a client + * @cl: Pointer to a HSI client + * + * Return the controller id where the client is attached to + */ +static inline unsigned int hsi_id(struct hsi_client *cl) +{ + return to_hsi_controller(cl->device.parent->parent)->id; +} + +/** + * hsi_port_id - Gets the port number a client is attached to + * @cl: Pointer to HSI client + * + * Return the port number associated to the client + */ +static inline unsigned int hsi_port_id(struct hsi_client *cl) +{ + return to_hsi_port(cl->device.parent)->num; +} + +/** + * hsi_setup - Configure the client's port + * @cl: Pointer to the HSI client + * + * When sharing ports, clients should either relay on a single + * client setup or have the same setup for all of them. + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_setup(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->setup(cl); +} + +/** + * hsi_flush - Flush all pending transactions on the client's port + * @cl: Pointer to the HSI client + * + * This function will destroy all pending hsi_msg in the port and reset + * the HW port so it is ready to receive and transmit from a clean state. + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_flush(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->flush(cl); +} + +/** + * hsi_async_read - Submit a read transfer + * @cl: Pointer to the HSI client + * @msg: HSI message descriptor of the transfer + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg) +{ + msg->ttype = HSI_MSG_READ; + return hsi_async(cl, msg); +} + +/** + * hsi_async_write - Submit a write transfer + * @cl: Pointer to the HSI client + * @msg: HSI message descriptor of the transfer + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg) +{ + msg->ttype = HSI_MSG_WRITE; + return hsi_async(cl, msg); +} + +/** + * hsi_start_tx - Signal the port that the client wants to start a TX + * @cl: Pointer to the HSI client + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_start_tx(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->start_tx(cl); +} + +/** + * hsi_stop_tx - Signal the port that the client no longer wants to transmit + * @cl: Pointer to the HSI client + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_stop_tx(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->stop_tx(cl); +} +#endif /* __LINUX_HSI_H__ */ -- cgit v1.2.3-70-g09d2 From 4e69fc22753fcce1d9275b5517ef3646ffeffcf4 Mon Sep 17 00:00:00 2001 From: Andras Domokos Date: Thu, 30 Sep 2010 17:18:53 +0300 Subject: HSI: hsi_char: Add HSI char device driver Add HSI char device driver to the kernel. Signed-off-by: Andras Domokos Signed-off-by: Carlos Chinea --- drivers/hsi/clients/hsi_char.c | 802 +++++++++++++++++++++++++++++++++++++++++ include/linux/hsi/hsi_char.h | 63 ++++ 2 files changed, 865 insertions(+) create mode 100644 drivers/hsi/clients/hsi_char.c create mode 100644 include/linux/hsi/hsi_char.h (limited to 'include/linux') diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c new file mode 100644 index 00000000000..88a050df238 --- /dev/null +++ b/drivers/hsi/clients/hsi_char.c @@ -0,0 +1,802 @@ +/* + * HSI character device driver, implements the character device + * interface. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define HSC_DEVS 16 /* Num of channels */ +#define HSC_MSGS 4 + +#define HSC_RXBREAK 0 + +#define HSC_ID_BITS 6 +#define HSC_PORT_ID_BITS 4 +#define HSC_ID_MASK 3 +#define HSC_PORT_ID_MASK 3 +#define HSC_CH_MASK 0xf + +/* + * We support up to 4 controllers that can have up to 4 + * ports, which should currently be more than enough. + */ +#define HSC_BASEMINOR(id, port_id) \ + ((((id) & HSC_ID_MASK) << HSC_ID_BITS) | \ + (((port_id) & HSC_PORT_ID_MASK) << HSC_PORT_ID_BITS)) + +enum { + HSC_CH_OPEN, + HSC_CH_READ, + HSC_CH_WRITE, + HSC_CH_WLINE, +}; + +enum { + HSC_RX, + HSC_TX, +}; + +struct hsc_client_data; +/** + * struct hsc_channel - hsi_char internal channel data + * @ch: channel number + * @flags: Keeps state of the channel (open/close, reading, writing) + * @free_msgs_list: List of free HSI messages/requests + * @rx_msgs_queue: List of pending RX requests + * @tx_msgs_queue: List of pending TX requests + * @lock: Serialize access to the lists + * @cl: reference to the associated hsi_client + * @cl_data: reference to the client data that this channels belongs to + * @rx_wait: RX requests wait queue + * @tx_wait: TX requests wait queue + */ +struct hsc_channel { + unsigned int ch; + unsigned long flags; + struct list_head free_msgs_list; + struct list_head rx_msgs_queue; + struct list_head tx_msgs_queue; + spinlock_t lock; + struct hsi_client *cl; + struct hsc_client_data *cl_data; + wait_queue_head_t rx_wait; + wait_queue_head_t tx_wait; +}; + +/** + * struct hsc_client_data - hsi_char internal client data + * @cdev: Characther device associated to the hsi_client + * @lock: Lock to serialize open/close access + * @flags: Keeps track of port state (rx hwbreak armed) + * @usecnt: Use count for claiming the HSI port (mutex protected) + * @cl: Referece to the HSI client + * @channels: Array of channels accessible by the client + */ +struct hsc_client_data { + struct cdev cdev; + struct mutex lock; + unsigned long flags; + unsigned int usecnt; + struct hsi_client *cl; + struct hsc_channel channels[HSC_DEVS]; +}; + +/* Stores the major number dynamically allocated for hsi_char */ +static unsigned int hsc_major; +/* Maximum buffer size that hsi_char will accept from userspace */ +static unsigned int max_data_size = 0x1000; +module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); + +static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, + struct list_head *queue) +{ + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + list_add_tail(&msg->link, queue); + spin_unlock_irqrestore(&channel->lock, flags); +} + +static struct hsi_msg *hsc_get_first_msg(struct hsc_channel *channel, + struct list_head *queue) +{ + struct hsi_msg *msg = NULL; + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + + if (list_empty(queue)) + goto out; + + msg = list_first_entry(queue, struct hsi_msg, link); + list_del(&msg->link); +out: + spin_unlock_irqrestore(&channel->lock, flags); + + return msg; +} + +static inline void hsc_msg_free(struct hsi_msg *msg) +{ + kfree(sg_virt(msg->sgt.sgl)); + hsi_free_msg(msg); +} + +static void hsc_free_list(struct list_head *list) +{ + struct hsi_msg *msg, *tmp; + + list_for_each_entry_safe(msg, tmp, list, link) { + list_del(&msg->link); + hsc_msg_free(msg); + } +} + +static void hsc_reset_list(struct hsc_channel *channel, struct list_head *l) +{ + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&channel->lock, flags); + list_splice_init(l, &list); + spin_unlock_irqrestore(&channel->lock, flags); + + hsc_free_list(&list); +} + +static inline struct hsi_msg *hsc_msg_alloc(unsigned int alloc_size) +{ + struct hsi_msg *msg; + void *buf; + + msg = hsi_alloc_msg(1, GFP_KERNEL); + if (!msg) + goto out; + buf = kmalloc(alloc_size, GFP_KERNEL); + if (!buf) { + hsi_free_msg(msg); + goto out; + } + sg_init_one(msg->sgt.sgl, buf, alloc_size); + /* Ignore false positive, due to sg pointer handling */ + kmemleak_ignore(buf); + + return msg; +out: + return NULL; +} + +static inline int hsc_msgs_alloc(struct hsc_channel *channel) +{ + struct hsi_msg *msg; + int i; + + for (i = 0; i < HSC_MSGS; i++) { + msg = hsc_msg_alloc(max_data_size); + if (!msg) + goto out; + msg->channel = channel->ch; + list_add_tail(&msg->link, &channel->free_msgs_list); + } + + return 0; +out: + hsc_free_list(&channel->free_msgs_list); + + return -ENOMEM; +} + +static inline unsigned int hsc_msg_len_get(struct hsi_msg *msg) +{ + return msg->sgt.sgl->length; +} + +static inline void hsc_msg_len_set(struct hsi_msg *msg, unsigned int len) +{ + msg->sgt.sgl->length = len; +} + +static void hsc_rx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_READ, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_rx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_rx_completed(msg); +} + +static void hsc_tx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_WRITE, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->tx_msgs_queue); + wake_up(&channel->tx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_tx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_tx_completed(msg); +} + +static void hsc_break_req_destructor(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + + hsi_free_msg(msg); + clear_bit(HSC_RXBREAK, &cl_data->flags); +} + +static void hsc_break_received(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels; + int i, ret; + + /* Broadcast HWBREAK on all channels */ + for (i = 0; i < HSC_DEVS; i++, channel++) { + struct hsi_msg *msg2; + + if (!test_bit(HSC_CH_READ, &channel->flags)) + continue; + msg2 = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg2) + continue; + clear_bit(HSC_CH_READ, &channel->flags); + hsc_msg_len_set(msg2, 0); + msg2->status = HSI_STATUS_COMPLETED; + hsc_add_tail(channel, msg2, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } + hsi_flush(msg->cl); + ret = hsi_async_read(msg->cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); +} + +static int hsc_break_request(struct hsi_client *cl) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + struct hsi_msg *msg; + int ret; + + if (test_and_set_bit(HSC_RXBREAK, &cl_data->flags)) + return -EBUSY; + + msg = hsi_alloc_msg(0, GFP_KERNEL); + if (!msg) { + clear_bit(HSC_RXBREAK, &cl_data->flags); + return -ENOMEM; + } + msg->break_frame = 1; + msg->complete = hsc_break_received; + msg->destructor = hsc_break_req_destructor; + ret = hsi_async_read(cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); + + return ret; +} + +static int hsc_break_send(struct hsi_client *cl) +{ + struct hsi_msg *msg; + int ret; + + msg = hsi_alloc_msg(0, GFP_ATOMIC); + if (!msg) + return -ENOMEM; + msg->break_frame = 1; + msg->complete = hsi_free_msg; + msg->destructor = hsi_free_msg; + ret = hsi_async_write(cl, msg); + if (ret < 0) + hsi_free_msg(msg); + + return ret; +} + +static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + struct hsi_config tmp; + int ret; + + if ((rxc->mode != HSI_MODE_STREAM) && (rxc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((rxc->channels == 0) || (rxc->channels > HSC_DEVS)) + return -EINVAL; + if (rxc->channels & (rxc->channels - 1)) + return -EINVAL; + if ((rxc->flow != HSI_FLOW_SYNC) && (rxc->flow != HSI_FLOW_PIPE)) + return -EINVAL; + tmp = cl->rx_cfg; + cl->rx_cfg.mode = rxc->mode; + cl->rx_cfg.channels = rxc->channels; + cl->rx_cfg.flow = rxc->flow; + ret = hsi_setup(cl); + if (ret < 0) { + cl->rx_cfg = tmp; + return ret; + } + if (rxc->mode == HSI_MODE_FRAME) + hsc_break_request(cl); + + return ret; +} + +static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + rxc->mode = cl->rx_cfg.mode; + rxc->channels = cl->rx_cfg.channels; + rxc->flow = cl->rx_cfg.flow; +} + +static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + struct hsi_config tmp; + int ret; + + if ((txc->mode != HSI_MODE_STREAM) && (txc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((txc->channels == 0) || (txc->channels > HSC_DEVS)) + return -EINVAL; + if (txc->channels & (txc->channels - 1)) + return -EINVAL; + if ((txc->arb_mode != HSI_ARB_RR) && (txc->arb_mode != HSI_ARB_PRIO)) + return -EINVAL; + tmp = cl->tx_cfg; + cl->tx_cfg.mode = txc->mode; + cl->tx_cfg.channels = txc->channels; + cl->tx_cfg.speed = txc->speed; + cl->tx_cfg.arb_mode = txc->arb_mode; + ret = hsi_setup(cl); + if (ret < 0) { + cl->tx_cfg = tmp; + return ret; + } + + return ret; +} + +static inline void hsc_tx_get(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + txc->mode = cl->tx_cfg.mode; + txc->channels = cl->tx_cfg.channels; + txc->speed = cl->tx_cfg.speed; + txc->arb_mode = cl->tx_cfg.arb_mode; +} + +static ssize_t hsc_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if (len == 0) + return 0; + if (!IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->rx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_READ, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + ret = -ENOSPC; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_rx_completed; + msg->destructor = hsc_rx_msg_destructor; + ret = hsi_async_read(channel->cl, msg); + if (ret < 0) { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + goto out; + } + + ret = wait_event_interruptible(channel->rx_wait, + !list_empty(&channel->rx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_READ, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->rx_msgs_queue); + if (msg) { + if (msg->status != HSI_STATUS_ERROR) { + ret = copy_to_user((void __user *)buf, + sg_virt(msg->sgt.sgl), hsc_msg_len_get(msg)); + if (ret) + ret = -EFAULT; + else + ret = hsc_msg_len_get(msg); + } else { + ret = -EIO; + } + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_READ, &channel->flags); + + return ret; +} + +static ssize_t hsc_write(struct file *file, const char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if ((len == 0) || !IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->tx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_WRITE, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + clear_bit(HSC_CH_WRITE, &channel->flags); + return -ENOSPC; + } + if (copy_from_user(sg_virt(msg->sgt.sgl), (void __user *)buf, len)) { + ret = -EFAULT; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_tx_completed; + msg->destructor = hsc_tx_msg_destructor; + ret = hsi_async_write(channel->cl, msg); + if (ret < 0) + goto out; + + ret = wait_event_interruptible(channel->tx_wait, + !list_empty(&channel->tx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_WRITE, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->tx_msgs_queue); + if (msg) { + if (msg->status == HSI_STATUS_ERROR) + ret = -EIO; + else + ret = hsc_msg_len_get(msg); + + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_WRITE, &channel->flags); + + return ret; +} + +static long hsc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct hsc_channel *channel = file->private_data; + unsigned int state; + struct hsc_rx_config rxc; + struct hsc_tx_config txc; + long ret = 0; + + switch (cmd) { + case HSC_RESET: + hsi_flush(channel->cl); + break; + case HSC_SET_PM: + if (copy_from_user(&state, (void __user *)arg, sizeof(state))) + return -EFAULT; + if (state == HSC_PM_DISABLE) { + if (test_and_set_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_start_tx(channel->cl); + } else if (state == HSC_PM_ENABLE) { + if (!test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_stop_tx(channel->cl); + } else { + ret = -EINVAL; + } + break; + case HSC_SEND_BREAK: + return hsc_break_send(channel->cl); + case HSC_SET_RX: + if (copy_from_user(&rxc, (void __user *)arg, sizeof(rxc))) + return -EFAULT; + return hsc_rx_set(channel->cl, &rxc); + case HSC_GET_RX: + hsc_rx_get(channel->cl, &rxc); + if (copy_to_user((void __user *)arg, &rxc, sizeof(rxc))) + return -EFAULT; + break; + case HSC_SET_TX: + if (copy_from_user(&txc, (void __user *)arg, sizeof(txc))) + return -EFAULT; + return hsc_tx_set(channel->cl, &txc); + case HSC_GET_TX: + hsc_tx_get(channel->cl, &txc); + if (copy_to_user((void __user *)arg, &txc, sizeof(txc))) + return -EFAULT; + break; + default: + return -ENOIOCTLCMD; + } + + return ret; +} + +static inline void __hsc_port_release(struct hsc_client_data *cl_data) +{ + BUG_ON(cl_data->usecnt == 0); + + if (--cl_data->usecnt == 0) { + hsi_flush(cl_data->cl); + hsi_release_port(cl_data->cl); + } +} + +static int hsc_open(struct inode *inode, struct file *file) +{ + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + int ret = 0; + + pr_debug("open, minor = %d\n", iminor(inode)); + + cl_data = container_of(inode->i_cdev, struct hsc_client_data, cdev); + mutex_lock(&cl_data->lock); + channel = cl_data->channels + (iminor(inode) & HSC_CH_MASK); + + if (test_and_set_bit(HSC_CH_OPEN, &channel->flags)) { + ret = -EBUSY; + goto out; + } + /* + * Check if we have already claimed the port associated to the HSI + * client. If not then try to claim it, else increase its refcount + */ + if (cl_data->usecnt == 0) { + ret = hsi_claim_port(cl_data->cl, 0); + if (ret < 0) + goto out; + hsi_setup(cl_data->cl); + } + cl_data->usecnt++; + + ret = hsc_msgs_alloc(channel); + if (ret < 0) { + __hsc_port_release(cl_data); + goto out; + } + + file->private_data = channel; + mutex_unlock(&cl_data->lock); + + return ret; +out: + mutex_unlock(&cl_data->lock); + + return ret; +} + +static int hsc_release(struct inode *inode __maybe_unused, struct file *file) +{ + struct hsc_channel *channel = file->private_data; + struct hsc_client_data *cl_data = channel->cl_data; + + mutex_lock(&cl_data->lock); + file->private_data = NULL; + if (test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + hsi_stop_tx(channel->cl); + __hsc_port_release(cl_data); + hsc_reset_list(channel, &channel->rx_msgs_queue); + hsc_reset_list(channel, &channel->tx_msgs_queue); + hsc_reset_list(channel, &channel->free_msgs_list); + clear_bit(HSC_CH_READ, &channel->flags); + clear_bit(HSC_CH_WRITE, &channel->flags); + clear_bit(HSC_CH_OPEN, &channel->flags); + wake_up(&channel->rx_wait); + wake_up(&channel->tx_wait); + mutex_unlock(&cl_data->lock); + + return 0; +} + +static const struct file_operations hsc_fops = { + .owner = THIS_MODULE, + .read = hsc_read, + .write = hsc_write, + .unlocked_ioctl = hsc_ioctl, + .open = hsc_open, + .release = hsc_release, +}; + +static void __devinit hsc_channel_init(struct hsc_channel *channel) +{ + init_waitqueue_head(&channel->rx_wait); + init_waitqueue_head(&channel->tx_wait); + spin_lock_init(&channel->lock); + INIT_LIST_HEAD(&channel->free_msgs_list); + INIT_LIST_HEAD(&channel->rx_msgs_queue); + INIT_LIST_HEAD(&channel->tx_msgs_queue); +} + +static int __devinit hsc_probe(struct device *dev) +{ + const char devname[] = "hsi_char"; + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + struct hsi_client *cl = to_hsi_client(dev); + unsigned int hsc_baseminor; + dev_t hsc_dev; + int ret; + int i; + + cl_data = kzalloc(sizeof(*cl_data), GFP_KERNEL); + if (!cl_data) { + dev_err(dev, "Could not allocate hsc_client_data\n"); + return -ENOMEM; + } + hsc_baseminor = HSC_BASEMINOR(hsi_id(cl), hsi_port_id(cl)); + if (!hsc_major) { + ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor, + HSC_DEVS, devname); + if (ret > 0) + hsc_major = MAJOR(hsc_dev); + } else { + hsc_dev = MKDEV(hsc_major, hsc_baseminor); + ret = register_chrdev_region(hsc_dev, HSC_DEVS, devname); + } + if (ret < 0) { + dev_err(dev, "Device %s allocation failed %d\n", + hsc_major ? "minor" : "major", ret); + goto out1; + } + mutex_init(&cl_data->lock); + hsi_client_set_drvdata(cl, cl_data); + cdev_init(&cl_data->cdev, &hsc_fops); + cl_data->cdev.owner = THIS_MODULE; + cl_data->cl = cl; + for (i = 0, channel = cl_data->channels; i < HSC_DEVS; i++, channel++) { + hsc_channel_init(channel); + channel->ch = i; + channel->cl = cl; + channel->cl_data = cl_data; + } + + /* 1 hsi client -> N char devices (one for each channel) */ + ret = cdev_add(&cl_data->cdev, hsc_dev, HSC_DEVS); + if (ret) { + dev_err(dev, "Could not add char device %d\n", ret); + goto out2; + } + + return 0; +out2: + unregister_chrdev_region(hsc_dev, HSC_DEVS); +out1: + kfree(cl_data); + + return ret; +} + +static int __devexit hsc_remove(struct device *dev) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + dev_t hsc_dev = cl_data->cdev.dev; + + cdev_del(&cl_data->cdev); + unregister_chrdev_region(hsc_dev, HSC_DEVS); + hsi_client_set_drvdata(cl, NULL); + kfree(cl_data); + + return 0; +} + +static struct hsi_client_driver hsc_driver = { + .driver = { + .name = "hsi_char", + .owner = THIS_MODULE, + .probe = hsc_probe, + .remove = __devexit_p(hsc_remove), + }, +}; + +static int __init hsc_init(void) +{ + int ret; + + if ((max_data_size < 4) || (max_data_size > 0x10000) || + (max_data_size & (max_data_size - 1))) { + pr_err("Invalid max read/write data size"); + return -EINVAL; + } + + ret = hsi_register_client_driver(&hsc_driver); + if (ret) { + pr_err("Error while registering HSI/SSI driver %d", ret); + return ret; + } + + pr_info("HSI/SSI char device loaded\n"); + + return 0; +} +module_init(hsc_init); + +static void __exit hsc_exit(void) +{ + hsi_unregister_client_driver(&hsc_driver); + pr_info("HSI char device removed\n"); +} +module_exit(hsc_exit); + +MODULE_AUTHOR("Andras Domokos "); +MODULE_ALIAS("hsi:hsi_char"); +MODULE_DESCRIPTION("HSI character device"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h new file mode 100644 index 00000000000..76160b4f455 --- /dev/null +++ b/include/linux/hsi/hsi_char.h @@ -0,0 +1,63 @@ +/* + * Part of the HSI character device driver. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +#ifndef __HSI_CHAR_H +#define __HSI_CHAR_H + +#define HSI_CHAR_MAGIC 'k' +#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) + +#define HSC_RESET HSC_IO(16) +#define HSC_SET_PM HSC_IO(17) +#define HSC_SEND_BREAK HSC_IO(18) +#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) +#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) +#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) +#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) + +#define HSC_PM_DISABLE 0 +#define HSC_PM_ENABLE 1 + +#define HSC_MODE_STREAM 1 +#define HSC_MODE_FRAME 2 +#define HSC_FLOW_SYNC 0 +#define HSC_ARB_RR 0 +#define HSC_ARB_PRIO 1 + +struct hsc_rx_config { + uint32_t mode; + uint32_t flow; + uint32_t channels; +}; + +struct hsc_tx_config { + uint32_t mode; + uint32_t channels; + uint32_t speed; + uint32_t arb_mode; +}; + +#endif /* __HSI_CHAR_H */ -- cgit v1.2.3-70-g09d2 From f9e402016de91c2444e46ecfd706880969b1ae9e Mon Sep 17 00:00:00 2001 From: Andras Domokos Date: Wed, 21 Apr 2010 12:04:21 +0300 Subject: HSI: hsi_char: Add HSI char device kernel configuration Add HSI character device kernel configuration Signed-off-by: Andras Domokos Signed-off-by: Carlos Chinea --- drivers/hsi/Kconfig | 2 ++ drivers/hsi/Makefile | 1 + drivers/hsi/clients/Kconfig | 13 +++++++++++++ drivers/hsi/clients/Makefile | 5 +++++ include/linux/Kbuild | 1 + include/linux/hsi/Kbuild | 1 + 6 files changed, 23 insertions(+) create mode 100644 drivers/hsi/clients/Kconfig create mode 100644 drivers/hsi/clients/Makefile create mode 100644 include/linux/hsi/Kbuild (limited to 'include/linux') diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig index 937062e8bcd..d94e38dd80c 100644 --- a/drivers/hsi/Kconfig +++ b/drivers/hsi/Kconfig @@ -14,4 +14,6 @@ config HSI_BOARDINFO bool default y +source "drivers/hsi/clients/Kconfig" + endif # HSI diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile index ed94a3a334a..9d5d33f90de 100644 --- a/drivers/hsi/Makefile +++ b/drivers/hsi/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o obj-$(CONFIG_HSI) += hsi.o +obj-y += clients/ diff --git a/drivers/hsi/clients/Kconfig b/drivers/hsi/clients/Kconfig new file mode 100644 index 00000000000..3bacd275f47 --- /dev/null +++ b/drivers/hsi/clients/Kconfig @@ -0,0 +1,13 @@ +# +# HSI clients configuration +# + +comment "HSI clients" + +config HSI_CHAR + tristate "HSI/SSI character driver" + depends on HSI + ---help--- + If you say Y here, you will enable the HSI/SSI character driver. + This driver provides a simple character device interface for + serial communication with the cellular modem over HSI/SSI bus. diff --git a/drivers/hsi/clients/Makefile b/drivers/hsi/clients/Makefile new file mode 100644 index 00000000000..327c0e27c8b --- /dev/null +++ b/drivers/hsi/clients/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for HSI clients +# + +obj-$(CONFIG_HSI_CHAR) += hsi_char.o diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 619b5657af7..3171939e626 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -3,6 +3,7 @@ header-y += can/ header-y += caif/ header-y += dvb/ header-y += hdlc/ +header-y += hsi/ header-y += isdn/ header-y += mmc/ header-y += nfsd/ diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild new file mode 100644 index 00000000000..271a770b478 --- /dev/null +++ b/include/linux/hsi/Kbuild @@ -0,0 +1 @@ +header-y += hsi_char.h -- cgit v1.2.3-70-g09d2 From 7f1e76370b717be264f0af54719182a96fb8f36d Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 17 Jan 2012 11:20:23 -0600 Subject: sh: intc: unify evt2irq/irq2evt macros for sh and arm Move evt2irq and irq2evt macros definitions out of sh and arm includes into a common location. Signed-off-by: Rob Herring --- arch/arm/mach-shmobile/Kconfig | 4 ++++ arch/arm/mach-shmobile/include/mach/irqs.h | 6 ++---- arch/sh/include/asm/irq.h | 11 ----------- include/linux/sh_intc.h | 11 +++++++++++ 4 files changed, 17 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 060e5644c49..34560cab45d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -100,6 +100,10 @@ config MACH_MARZEN comment "SH-Mobile System Configuration" +config CPU_HAS_INTEVT + bool + default y + menu "Memory configuration" config MEMORY_START diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index dcb714f4d75..828807dce5a 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -1,15 +1,13 @@ #ifndef __ASM_MACH_IRQS_H #define __ASM_MACH_IRQS_H +#include + #define NR_IRQS 1024 /* GIC */ #define gic_spi(nr) ((nr) + 32) -/* INTCA */ -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) - /* INTCS */ #define INTCS_VECT_BASE 0x2200 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h index 45d08b6a5ef..2a62017eb27 100644 --- a/arch/sh/include/asm/irq.h +++ b/arch/sh/include/asm/irq.h @@ -20,17 +20,6 @@ */ #define NO_IRQ_IGNORE ((unsigned int)-1) -/* - * Convert back and forth between INTEVT and IRQ values. - */ -#ifdef CONFIG_CPU_HAS_INTEVT -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) -#else -#define evt2irq(evt) (evt) -#define irq2evt(irq) (irq) -#endif - /* * Simple Mask Register Support */ diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index b160645f559..e1a2ac5c931 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -3,6 +3,17 @@ #include +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + typedef unsigned char intc_enum; struct intc_vect { -- cgit v1.2.3-70-g09d2 From 0f55239348aa85021d8bf8b63d84a796fcc142a4 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 17 Jan 2012 13:10:25 -0600 Subject: sh: intc: remove dependency on NR_IRQS SH intc has a compile time dependency on NR_IRQS. Make this dependency a local define so that shmobile (and ARM in general) can have run-time NR_IRQS setting. Signed-off-by: Rob Herring --- drivers/sh/intc/balancing.c | 2 +- drivers/sh/intc/core.c | 2 +- drivers/sh/intc/handle.c | 2 +- drivers/sh/intc/virq.c | 2 +- include/linux/sh_intc.h | 6 ++++++ 5 files changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/sh/intc/balancing.c b/drivers/sh/intc/balancing.c index cec7a96f2c0..bc780807ccb 100644 --- a/drivers/sh/intc/balancing.c +++ b/drivers/sh/intc/balancing.c @@ -9,7 +9,7 @@ */ #include "internals.h" -static unsigned long dist_handle[NR_IRQS]; +static unsigned long dist_handle[INTC_NR_IRQS]; void intc_balancing_enable(unsigned int irq) { diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index e53e449b4ec..2fde8970dfd 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -42,7 +42,7 @@ unsigned int nr_intc_controllers; * - this needs to be at least 2 for 5-bit priorities on 7780 */ static unsigned int default_prio_level = 2; /* 2 - 16 */ -static unsigned int intc_prio_level[NR_IRQS]; /* for now */ +static unsigned int intc_prio_level[INTC_NR_IRQS]; /* for now */ unsigned int intc_get_dfl_prio_level(void) { diff --git a/drivers/sh/intc/handle.c b/drivers/sh/intc/handle.c index 057ce56829b..f461d5300b8 100644 --- a/drivers/sh/intc/handle.c +++ b/drivers/sh/intc/handle.c @@ -13,7 +13,7 @@ #include #include "internals.h" -static unsigned long ack_handle[NR_IRQS]; +static unsigned long ack_handle[INTC_NR_IRQS]; static intc_enum __init intc_grp_id(struct intc_desc *desc, intc_enum enum_id) diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c index c7ec49ffd9f..93cec21e788 100644 --- a/drivers/sh/intc/virq.c +++ b/drivers/sh/intc/virq.c @@ -17,7 +17,7 @@ #include #include "internals.h" -static struct intc_map_entry intc_irq_xlate[NR_IRQS]; +static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS]; struct intc_virq_list { unsigned int irq; diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index e1a2ac5c931..6aed0805927 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -3,6 +3,12 @@ #include +#ifdef CONFIG_SUPERH +#define INTC_NR_IRQS 512 +#else +#define INTC_NR_IRQS 1024 +#endif + /* * Convert back and forth between INTEVT and IRQ values. */ -- cgit v1.2.3-70-g09d2 From 30816ac0495cb4f33fc8d748f64ac3cc880cb3c1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jan 2012 22:51:07 +0000 Subject: MFD: mcp-core: sanitize host creation/removal host_unregister() gives us no chance between removing the device and the mcp data structure being freed to access the data inbetween, which drivers may need to do if they need to iounmap() pointers in their private data structures. Therefore, re-jig the interfaces, which are now, on creation: mcp = mcp_host_alloc() if (mcp) { ret = mcp_host_add(mcp, data); if (!ret) mcp_host_free(mcp); } and on removal: mcp_host_del(mcp); ... access mcp ... mcp_host_free(mcp); The free does the final put_device() on the struct device as one would expect. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/mcp-core.c | 19 +++++++++++++------ drivers/mfd/mcp-sa11x0.c | 6 ++++-- include/linux/mfd/mcp.h | 5 +++-- 3 files changed, 20 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 86cc3f7841c..cc764317784 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -208,6 +208,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL); if (mcp) { spin_lock_init(&mcp->lock); + device_initialize(&mcp->attached_device); mcp->attached_device.parent = parent; mcp->attached_device.bus = &mcp_bus_type; mcp->attached_device.dma_mask = parent->dma_mask; @@ -217,18 +218,24 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) } EXPORT_SYMBOL(mcp_host_alloc); -int mcp_host_register(struct mcp *mcp) +int mcp_host_add(struct mcp *mcp) { dev_set_name(&mcp->attached_device, "mcp0"); - return device_register(&mcp->attached_device); + return device_add(&mcp->attached_device); } -EXPORT_SYMBOL(mcp_host_register); +EXPORT_SYMBOL(mcp_host_add); -void mcp_host_unregister(struct mcp *mcp) +void mcp_host_del(struct mcp *mcp) { - device_unregister(&mcp->attached_device); + device_del(&mcp->attached_device); } -EXPORT_SYMBOL(mcp_host_unregister); +EXPORT_SYMBOL(mcp_host_del); + +void mcp_host_free(struct mcp *mcp) +{ + put_device(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_free); int mcp_driver_register(struct mcp_driver *mcpdrv) { diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 02c53a0766c..33cadc0ec12 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -195,10 +195,11 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / mcp->sclk_rate; - ret = mcp_host_register(mcp); + ret = mcp_host_add(mcp); if (ret == 0) goto out; + mcp_host_free(mcp); release: release_mem_region(0x80060000, 0x60); platform_set_drvdata(pdev, NULL); @@ -212,7 +213,8 @@ static int mcp_sa11x0_remove(struct platform_device *dev) struct mcp *mcp = platform_get_drvdata(dev); platform_set_drvdata(dev, NULL); - mcp_host_unregister(mcp); + mcp_host_del(mcp); + mcp_host_free(mcp); release_mem_region(0x80060000, 0x60); return 0; diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index f88c1cc0cb0..79a6b13ba20 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -47,8 +47,9 @@ void mcp_disable(struct mcp *); #define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *); -void mcp_host_unregister(struct mcp *); +int mcp_host_add(struct mcp *); +void mcp_host_del(struct mcp *); +void mcp_host_free(struct mcp *); struct mcp_driver { struct device_driver drv; -- cgit v1.2.3-70-g09d2 From 7658e7f9a8122b0678e4b4280308560aa5444bd5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Jan 2012 19:04:43 +0000 Subject: MFD: mcp-sa11x0: remove DMA initializers and variables The dma_device_t variables are only ever written to by mcp-sa11x0 and never read. As the old SA11x0 DMA support will be removed, remove these so that it no longer depends on the old SA11x0 DMA definitions. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/mcp-core.c | 1 - drivers/mfd/mcp-sa11x0.c | 5 ----- drivers/mfd/ucb1x00-assabet.c | 3 --- drivers/mfd/ucb1x00-core.c | 1 - drivers/mfd/ucb1x00-ts.c | 1 - include/linux/mfd/mcp.h | 6 ------ 6 files changed, 17 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index cc764317784..280a4f8a787 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -19,7 +19,6 @@ #include #include -#include #include diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 33cadc0ec12..d2ebc641b01 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include @@ -158,10 +157,6 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; mcp->sclk_rate = data->sclk_rate; - mcp->dma_audio_rd = DMA_Ser4MCP0Rd; - mcp->dma_audio_wr = DMA_Ser4MCP0Wr; - mcp->dma_telco_rd = DMA_Ser4MCP1Rd; - mcp->dma_telco_wr = DMA_Ser4MCP1Wr; mcp->gpio_base = data->gpio_base; platform_set_drvdata(pdev, mcp); diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index cea9da60850..b7be613cb50 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -16,9 +16,6 @@ #include #include -#include - - #define UCB1X00_ATTR(name,input)\ static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index febc90cdef7..f2fb4205467 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -29,7 +29,6 @@ #include #include -#include #include static DEFINE_MUTEX(ucb1x00_mutex); diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 63a3cbdfa3f..ec6ffb6e287 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -32,7 +32,6 @@ #include #include -#include #include #include diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index 79a6b13ba20..dfe7e517ad9 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -10,8 +10,6 @@ #ifndef MCP_H #define MCP_H -#include - struct mcp_ops; struct mcp { @@ -21,10 +19,6 @@ struct mcp { int use_count; unsigned int sclk_rate; unsigned int rw_timeout; - dma_device_t dma_audio_rd; - dma_device_t dma_audio_wr; - dma_device_t dma_telco_rd; - dma_device_t dma_telco_wr; struct device attached_device; int gpio_base; }; -- cgit v1.2.3-70-g09d2 From 9467d298e92455e6fd411d7ef1f367ced940587c Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Wed, 1 Feb 2012 12:09:04 +0530 Subject: gpio: tps65910: Add sleep control support The device tps65910/tps65911 supports the sleep functionality in some of gpios. If gpio is configured in output mode and sleep is enabled then during device sleep state, the output of gpio becomes LOW regardless of non-sleep output value. Such gpio can be used to control regulator switch such that output of regulator is off in device sleep state. Signed-off-by: Laxman Dewangan Signed-off-by: Grant Likely Acked-by: Linus Walleij --- drivers/gpio/gpio-tps65910.c | 20 ++++++++++++++++++-- include/linux/mfd/tps65910.h | 8 ++++++++ 2 files changed, 26 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c index 91f45b965d1..7eef648a335 100644 --- a/drivers/gpio/gpio-tps65910.c +++ b/drivers/gpio/gpio-tps65910.c @@ -69,6 +69,7 @@ static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) { int ret; + struct tps65910_board *board_data; if (!gpio_base) return; @@ -80,10 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) switch(tps65910_chip_id(tps65910)) { case TPS65910: - tps65910->gpio.ngpio = 6; + tps65910->gpio.ngpio = TPS65910_NUM_GPIO; break; case TPS65911: - tps65910->gpio.ngpio = 9; + tps65910->gpio.ngpio = TPS65911_NUM_GPIO; break; default: return; @@ -95,6 +96,21 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) tps65910->gpio.set = tps65910_gpio_set; tps65910->gpio.get = tps65910_gpio_get; + /* Configure sleep control for gpios */ + board_data = dev_get_platdata(tps65910->dev); + if (board_data) { + int i; + for (i = 0; i < tps65910->gpio.ngpio; ++i) { + if (board_data->en_gpio_sleep[i]) { + ret = tps65910_set_bits(tps65910, + TPS65910_GPIO0 + i, GPIO_SLEEP_MASK); + if (ret < 0) + dev_warn(tps65910->dev, + "GPIO Sleep setting failed\n"); + } + } + } + ret = gpiochip_add(&tps65910->gpio); if (ret) diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index d0cb12eba40..9071902bd22 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -657,6 +657,8 @@ /*Register GPIO (0x80) register.RegisterDescription */ +#define GPIO_SLEEP_MASK 0x80 +#define GPIO_SLEEP_SHIFT 7 #define GPIO_DEB_MASK 0x10 #define GPIO_DEB_SHIFT 4 #define GPIO_PUEN_MASK 0x08 @@ -740,6 +742,11 @@ #define TPS65910_GPIO_STS BIT(1) #define TPS65910_GPIO_SET BIT(0) +/* Max number of TPS65910/11 GPIOs */ +#define TPS65910_NUM_GPIO 6 +#define TPS65911_NUM_GPIO 9 +#define TPS6591X_MAX_NUM_GPIO 9 + /* Regulator Index Definitions */ #define TPS65910_REG_VRTC 0 #define TPS65910_REG_VIO 1 @@ -779,6 +786,7 @@ struct tps65910_board { int irq_base; int vmbch_threshold; int vmbch2_threshold; + bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; -- cgit v1.2.3-70-g09d2 From ff64abefb6680dfc2aca7ecaa5e695949e7335c9 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 2 Feb 2012 16:20:01 +0100 Subject: of_gpio: add support of of_gpio_named_count to be able to count named gpio Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Grant Likely --- drivers/of/gpio.c | 9 +++++---- include/linux/of_gpio.h | 27 +++++++++++++++++++++++++-- 2 files changed, 30 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index 7e62d15d60f..e034b38590a 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -78,8 +78,9 @@ err0: EXPORT_SYMBOL(of_get_named_gpio_flags); /** - * of_gpio_count - Count GPIOs for a device + * of_gpio_named_count - Count GPIOs for a device * @np: device node to count GPIOs for + * @propname: property name containing gpio specifier(s) * * The function returns the count of GPIOs specified for a node. * @@ -93,14 +94,14 @@ EXPORT_SYMBOL(of_get_named_gpio_flags); * defines four GPIOs (so this function will return 4), two of which * are not specified. */ -unsigned int of_gpio_count(struct device_node *np) +unsigned int of_gpio_named_count(struct device_node *np, const char* propname) { unsigned int cnt = 0; do { int ret; - ret = of_parse_phandle_with_args(np, "gpios", "#gpio-cells", + ret = of_parse_phandle_with_args(np, propname, "#gpio-cells", cnt, NULL); /* A hole in the gpios = <> counts anyway. */ if (ret < 0 && ret != -EEXIST) @@ -109,7 +110,7 @@ unsigned int of_gpio_count(struct device_node *np) return cnt; } -EXPORT_SYMBOL(of_gpio_count); +EXPORT_SYMBOL(of_gpio_named_count); /** * of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index b254052a49d..81733d12cbe 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -50,7 +50,8 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc) extern int of_get_named_gpio_flags(struct device_node *np, const char *list_name, int index, enum of_gpio_flags *flags); -extern unsigned int of_gpio_count(struct device_node *np); +extern unsigned int of_gpio_named_count(struct device_node *np, + const char* propname); extern int of_mm_gpiochip_add(struct device_node *np, struct of_mm_gpio_chip *mm_gc); @@ -71,7 +72,8 @@ static inline int of_get_named_gpio_flags(struct device_node *np, return -ENOSYS; } -static inline unsigned int of_gpio_count(struct device_node *np) +static inline unsigned int of_gpio_named_count(struct device_node *np, + const char* propname) { return 0; } @@ -88,6 +90,27 @@ static inline void of_gpiochip_remove(struct gpio_chip *gc) { } #endif /* CONFIG_OF_GPIO */ +/** + * of_gpio_count - Count GPIOs for a device + * @np: device node to count GPIOs for + * + * The function returns the count of GPIOs specified for a node. + * + * Note that the empty GPIO specifiers counts too. For example, + * + * gpios = <0 + * &pio1 1 2 + * 0 + * &pio2 3 4>; + * + * defines four GPIOs (so this function will return 4), two of which + * are not specified. + */ +static inline unsigned int of_gpio_count(struct device_node *np) +{ + return of_gpio_named_count(np, "gpios"); +} + /** * of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API * @np: device node to get GPIO from -- cgit v1.2.3-70-g09d2 From 8b3d1cda4f5ff0d7c2ae910ea8fd03493996912f Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 7 Feb 2012 21:09:05 -0800 Subject: posix_types: Remove fd_set macros includes a set of macros that operate on file descriptors. Way long ago those were exported to user space, but nowadays they are #ifdef __KERNEL__. However, they are nothing but standard (nonatomic) bit operations, and we already have optimized versions of bit operations in the kernel. We can't include in but we can move the definitions to and define them there in terms of standard kernel bitops. [ v2: folds the following fixes in: a) Stray space in __FD_SET(), reported by Andrew Morton b) #include needed for memset(), reported by Tony Luck ] Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/r/1328677745-20121-22-git-send-email-hpa@zytor.com Cc: Arnd Bergmann Cc: Tony Luck Cc: Andrew Morton --- include/asm-generic/posix_types.h | 72 --------------------------------------- include/linux/time.h | 24 +++++++++++++ 2 files changed, 24 insertions(+), 72 deletions(-) (limited to 'include/linux') diff --git a/include/asm-generic/posix_types.h b/include/asm-generic/posix_types.h index ac217600a9c..e294fe66125 100644 --- a/include/asm-generic/posix_types.h +++ b/include/asm-generic/posix_types.h @@ -92,76 +92,4 @@ typedef char * __kernel_caddr_t; typedef unsigned short __kernel_uid16_t; typedef unsigned short __kernel_gid16_t; -#ifdef __KERNEL__ - -#undef __FD_SET -static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - -#undef __FD_ISSET -static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static inline void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* __KERNEL__ */ - #endif /* __ASM_GENERIC_POSIX_TYPES_H */ diff --git a/include/linux/time.h b/include/linux/time.h index b3061782dec..93277a0b229 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -4,8 +4,11 @@ #include #ifdef __KERNEL__ +# include # include +# include # include +# include # include #endif @@ -256,6 +259,27 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } + +static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + __set_bit(__fd, __fdsetp->fds_bits); +} + +static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + __clear_bit(__fd, __fdsetp->fds_bits); +} + +static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__fdsetp) +{ + return test_bit(__fd, __fdsetp->fds_bits); +} + +static inline void __FD_ZERO(__kernel_fd_set *__fdsetp) +{ + memset(__fdsetp->fds_bits, 0, sizeof __fdsetp->fds_bits); +} + #endif /* __KERNEL__ */ #define NFDBITS __NFDBITS -- cgit v1.2.3-70-g09d2 From cec56c8ff5e28f58ff13041dca7853738ae577a1 Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Wed, 15 Feb 2012 11:30:00 -0600 Subject: svcrdma: Cleanup sparse warnings in the svcrdma module The svcrdma transport was un-marshalling requests in-place. This resulted in sparse warnings due to __beXX data containing both NBO and HBO data. The code has been restructured to do byte-swapping as the header is parsed instead of when the header is validated immediately after receipt. Also moved extern declarations for the workqueue and memory pools to the private header file. Signed-off-by: Tom Tucker Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 2 +- net/sunrpc/xprtrdma/svc_rdma.c | 1 + net/sunrpc/xprtrdma/svc_rdma_marshal.c | 66 ++++++++------------------------ net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 20 +++++----- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 26 +++++++------ net/sunrpc/xprtrdma/svc_rdma_transport.c | 10 +---- net/sunrpc/xprtrdma/xprt_rdma.h | 7 ++++ 7 files changed, 51 insertions(+), 81 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index c14fe86dac5..d205e9f938c 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -292,7 +292,7 @@ svc_rdma_get_reply_array(struct rpcrdma_msg *rmsgp) if (wr_ary) { rp_ary = (struct rpcrdma_write_array *) &wr_ary-> - wc_array[wr_ary->wc_nchunks].wc_target.rs_length; + wc_array[ntohl(wr_ary->wc_nchunks)].wc_target.rs_length; goto found_it; } diff --git a/net/sunrpc/xprtrdma/svc_rdma.c b/net/sunrpc/xprtrdma/svc_rdma.c index 09af4fab1a4..8343737e85f 100644 --- a/net/sunrpc/xprtrdma/svc_rdma.c +++ b/net/sunrpc/xprtrdma/svc_rdma.c @@ -47,6 +47,7 @@ #include #include #include +#include "xprt_rdma.h" #define RPCDBG_FACILITY RPCDBG_SVCXPRT diff --git a/net/sunrpc/xprtrdma/svc_rdma_marshal.c b/net/sunrpc/xprtrdma/svc_rdma_marshal.c index 9530ef2d40d..8d2edddf48c 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_marshal.c +++ b/net/sunrpc/xprtrdma/svc_rdma_marshal.c @@ -60,21 +60,11 @@ static u32 *decode_read_list(u32 *va, u32 *vaend) struct rpcrdma_read_chunk *ch = (struct rpcrdma_read_chunk *)va; while (ch->rc_discrim != xdr_zero) { - u64 ch_offset; - if (((unsigned long)ch + sizeof(struct rpcrdma_read_chunk)) > (unsigned long)vaend) { dprintk("svcrdma: vaend=%p, ch=%p\n", vaend, ch); return NULL; } - - ch->rc_discrim = ntohl(ch->rc_discrim); - ch->rc_position = ntohl(ch->rc_position); - ch->rc_target.rs_handle = ntohl(ch->rc_target.rs_handle); - ch->rc_target.rs_length = ntohl(ch->rc_target.rs_length); - va = (u32 *)&ch->rc_target.rs_offset; - xdr_decode_hyper(va, &ch_offset); - put_unaligned(ch_offset, (u64 *)va); ch++; } return (u32 *)&ch->rc_position; @@ -91,7 +81,7 @@ void svc_rdma_rcl_chunk_counts(struct rpcrdma_read_chunk *ch, *byte_count = 0; *ch_count = 0; for (; ch->rc_discrim != 0; ch++) { - *byte_count = *byte_count + ch->rc_target.rs_length; + *byte_count = *byte_count + ntohl(ch->rc_target.rs_length); *ch_count = *ch_count + 1; } } @@ -108,7 +98,8 @@ void svc_rdma_rcl_chunk_counts(struct rpcrdma_read_chunk *ch, */ static u32 *decode_write_list(u32 *va, u32 *vaend) { - int ch_no; + int nchunks; + struct rpcrdma_write_array *ary = (struct rpcrdma_write_array *)va; @@ -121,37 +112,24 @@ static u32 *decode_write_list(u32 *va, u32 *vaend) dprintk("svcrdma: ary=%p, vaend=%p\n", ary, vaend); return NULL; } - ary->wc_discrim = ntohl(ary->wc_discrim); - ary->wc_nchunks = ntohl(ary->wc_nchunks); + nchunks = ntohl(ary->wc_nchunks); if (((unsigned long)&ary->wc_array[0] + - (sizeof(struct rpcrdma_write_chunk) * ary->wc_nchunks)) > + (sizeof(struct rpcrdma_write_chunk) * nchunks)) > (unsigned long)vaend) { dprintk("svcrdma: ary=%p, wc_nchunks=%d, vaend=%p\n", - ary, ary->wc_nchunks, vaend); + ary, nchunks, vaend); return NULL; } - for (ch_no = 0; ch_no < ary->wc_nchunks; ch_no++) { - u64 ch_offset; - - ary->wc_array[ch_no].wc_target.rs_handle = - ntohl(ary->wc_array[ch_no].wc_target.rs_handle); - ary->wc_array[ch_no].wc_target.rs_length = - ntohl(ary->wc_array[ch_no].wc_target.rs_length); - va = (u32 *)&ary->wc_array[ch_no].wc_target.rs_offset; - xdr_decode_hyper(va, &ch_offset); - put_unaligned(ch_offset, (u64 *)va); - } - /* * rs_length is the 2nd 4B field in wc_target and taking its * address skips the list terminator */ - return (u32 *)&ary->wc_array[ch_no].wc_target.rs_length; + return (u32 *)&ary->wc_array[nchunks].wc_target.rs_length; } static u32 *decode_reply_array(u32 *va, u32 *vaend) { - int ch_no; + int nchunks; struct rpcrdma_write_array *ary = (struct rpcrdma_write_array *)va; @@ -164,28 +142,15 @@ static u32 *decode_reply_array(u32 *va, u32 *vaend) dprintk("svcrdma: ary=%p, vaend=%p\n", ary, vaend); return NULL; } - ary->wc_discrim = ntohl(ary->wc_discrim); - ary->wc_nchunks = ntohl(ary->wc_nchunks); + nchunks = ntohl(ary->wc_nchunks); if (((unsigned long)&ary->wc_array[0] + - (sizeof(struct rpcrdma_write_chunk) * ary->wc_nchunks)) > + (sizeof(struct rpcrdma_write_chunk) * nchunks)) > (unsigned long)vaend) { dprintk("svcrdma: ary=%p, wc_nchunks=%d, vaend=%p\n", - ary, ary->wc_nchunks, vaend); + ary, nchunks, vaend); return NULL; } - for (ch_no = 0; ch_no < ary->wc_nchunks; ch_no++) { - u64 ch_offset; - - ary->wc_array[ch_no].wc_target.rs_handle = - ntohl(ary->wc_array[ch_no].wc_target.rs_handle); - ary->wc_array[ch_no].wc_target.rs_length = - ntohl(ary->wc_array[ch_no].wc_target.rs_length); - va = (u32 *)&ary->wc_array[ch_no].wc_target.rs_offset; - xdr_decode_hyper(va, &ch_offset); - put_unaligned(ch_offset, (u64 *)va); - } - - return (u32 *)&ary->wc_array[ch_no]; + return (u32 *)&ary->wc_array[nchunks]; } int svc_rdma_xdr_decode_req(struct rpcrdma_msg **rdma_req, @@ -386,13 +351,14 @@ void svc_rdma_xdr_encode_reply_array(struct rpcrdma_write_array *ary, void svc_rdma_xdr_encode_array_chunk(struct rpcrdma_write_array *ary, int chunk_no, - u32 rs_handle, u64 rs_offset, + __be32 rs_handle, + __be64 rs_offset, u32 write_len) { struct rpcrdma_segment *seg = &ary->wc_array[chunk_no].wc_target; - seg->rs_handle = htonl(rs_handle); + seg->rs_handle = rs_handle; + seg->rs_offset = rs_offset; seg->rs_length = htonl(write_len); - xdr_encode_hyper((u32 *) &seg->rs_offset, rs_offset); } void svc_rdma_xdr_encode_reply_header(struct svcxprt_rdma *xprt, diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c index df67211c4ba..41cb63b623d 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c @@ -147,7 +147,7 @@ static int map_read_chunks(struct svcxprt_rdma *xprt, page_off = 0; ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0]; ch_no = 0; - ch_bytes = ch->rc_target.rs_length; + ch_bytes = ntohl(ch->rc_target.rs_length); head->arg.head[0] = rqstp->rq_arg.head[0]; head->arg.tail[0] = rqstp->rq_arg.tail[0]; head->arg.pages = &head->pages[head->count]; @@ -183,7 +183,7 @@ static int map_read_chunks(struct svcxprt_rdma *xprt, ch_no++; ch++; chl_map->ch[ch_no].start = sge_no; - ch_bytes = ch->rc_target.rs_length; + ch_bytes = ntohl(ch->rc_target.rs_length); /* If bytes remaining account for next chunk */ if (byte_count) { head->arg.page_len += ch_bytes; @@ -281,11 +281,12 @@ static int fast_reg_read_chunks(struct svcxprt_rdma *xprt, offset = 0; ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0]; for (ch_no = 0; ch_no < ch_count; ch_no++) { + int len = ntohl(ch->rc_target.rs_length); rpl_map->sge[ch_no].iov_base = frmr->kva + offset; - rpl_map->sge[ch_no].iov_len = ch->rc_target.rs_length; + rpl_map->sge[ch_no].iov_len = len; chl_map->ch[ch_no].count = 1; chl_map->ch[ch_no].start = ch_no; - offset += ch->rc_target.rs_length; + offset += len; ch++; } @@ -316,7 +317,7 @@ static int rdma_set_ctxt_sge(struct svcxprt_rdma *xprt, for (i = 0; i < count; i++) { ctxt->sge[i].length = 0; /* in case map fails */ if (!frmr) { - BUG_ON(0 == virt_to_page(vec[i].iov_base)); + BUG_ON(!virt_to_page(vec[i].iov_base)); off = (unsigned long)vec[i].iov_base & ~PAGE_MASK; ctxt->sge[i].addr = ib_dma_map_page(xprt->sc_cm_id->device, @@ -426,6 +427,7 @@ static int rdma_read_xdr(struct svcxprt_rdma *xprt, for (ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0]; ch->rc_discrim != 0; ch++, ch_no++) { + u64 rs_offset; next_sge: ctxt = svc_rdma_get_context(xprt); ctxt->direction = DMA_FROM_DEVICE; @@ -440,10 +442,10 @@ next_sge: read_wr.opcode = IB_WR_RDMA_READ; ctxt->wr_op = read_wr.opcode; read_wr.send_flags = IB_SEND_SIGNALED; - read_wr.wr.rdma.rkey = ch->rc_target.rs_handle; - read_wr.wr.rdma.remote_addr = - get_unaligned(&(ch->rc_target.rs_offset)) + - sgl_offset; + read_wr.wr.rdma.rkey = ntohl(ch->rc_target.rs_handle); + xdr_decode_hyper((__be32 *)&ch->rc_target.rs_offset, + &rs_offset); + read_wr.wr.rdma.remote_addr = rs_offset + sgl_offset; read_wr.sg_list = ctxt->sge; read_wr.num_sge = rdma_read_max_sge(xprt, chl_map->ch[ch_no].count); diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c index 249a835b703..42eb7ba0b90 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c +++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c @@ -409,21 +409,21 @@ static int send_write_chunks(struct svcxprt_rdma *xprt, u64 rs_offset; arg_ch = &arg_ary->wc_array[chunk_no].wc_target; - write_len = min(xfer_len, arg_ch->rs_length); + write_len = min(xfer_len, ntohl(arg_ch->rs_length)); /* Prepare the response chunk given the length actually * written */ - rs_offset = get_unaligned(&(arg_ch->rs_offset)); + xdr_decode_hyper((__be32 *)&arg_ch->rs_offset, &rs_offset); svc_rdma_xdr_encode_array_chunk(res_ary, chunk_no, - arg_ch->rs_handle, - rs_offset, - write_len); + arg_ch->rs_handle, + arg_ch->rs_offset, + write_len); chunk_off = 0; while (write_len) { int this_write; this_write = min(write_len, max_write); ret = send_write(xprt, rqstp, - arg_ch->rs_handle, + ntohl(arg_ch->rs_handle), rs_offset + chunk_off, xdr_off, this_write, @@ -457,6 +457,7 @@ static int send_reply_chunks(struct svcxprt_rdma *xprt, u32 xdr_off; int chunk_no; int chunk_off; + int nchunks; struct rpcrdma_segment *ch; struct rpcrdma_write_array *arg_ary; struct rpcrdma_write_array *res_ary; @@ -476,26 +477,27 @@ static int send_reply_chunks(struct svcxprt_rdma *xprt, max_write = xprt->sc_max_sge * PAGE_SIZE; /* xdr offset starts at RPC message */ + nchunks = ntohl(arg_ary->wc_nchunks); for (xdr_off = 0, chunk_no = 0; - xfer_len && chunk_no < arg_ary->wc_nchunks; + xfer_len && chunk_no < nchunks; chunk_no++) { u64 rs_offset; ch = &arg_ary->wc_array[chunk_no].wc_target; - write_len = min(xfer_len, ch->rs_length); + write_len = min(xfer_len, htonl(ch->rs_length)); /* Prepare the reply chunk given the length actually * written */ - rs_offset = get_unaligned(&(ch->rs_offset)); + xdr_decode_hyper((__be32 *)&ch->rs_offset, &rs_offset); svc_rdma_xdr_encode_array_chunk(res_ary, chunk_no, - ch->rs_handle, rs_offset, - write_len); + ch->rs_handle, ch->rs_offset, + write_len); chunk_off = 0; while (write_len) { int this_write; this_write = min(write_len, max_write); ret = send_write(xprt, rqstp, - ch->rs_handle, + ntohl(ch->rs_handle), rs_offset + chunk_off, xdr_off, this_write, diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 894cb42db91..73b428bef59 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -51,6 +51,7 @@ #include #include #include +#include "xprt_rdma.h" #define RPCDBG_FACILITY RPCDBG_SVCXPRT @@ -90,12 +91,6 @@ struct svc_xprt_class svc_rdma_class = { .xcl_max_payload = RPCSVC_MAXPAYLOAD_TCP, }; -/* WR context cache. Created in svc_rdma.c */ -extern struct kmem_cache *svc_rdma_ctxt_cachep; - -/* Workqueue created in svc_rdma.c */ -extern struct workqueue_struct *svc_rdma_wq; - struct svc_rdma_op_ctxt *svc_rdma_get_context(struct svcxprt_rdma *xprt) { struct svc_rdma_op_ctxt *ctxt; @@ -150,9 +145,6 @@ void svc_rdma_put_context(struct svc_rdma_op_ctxt *ctxt, int free_pages) atomic_dec(&xprt->sc_ctxt_used); } -/* Temporary NFS request map cache. Created in svc_rdma.c */ -extern struct kmem_cache *svc_rdma_map_cachep; - /* * Temporary NFS req mappings are shared across all transport * instances. These are short lived and should be bounded by the number diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h index 08c5d5a128f..9a66c95b583 100644 --- a/net/sunrpc/xprtrdma/xprt_rdma.h +++ b/net/sunrpc/xprtrdma/xprt_rdma.h @@ -343,4 +343,11 @@ void rpcrdma_reply_handler(struct rpcrdma_rep *); */ int rpcrdma_marshal_req(struct rpc_rqst *); +/* Temporary NFS request map cache. Created in svc_rdma.c */ +extern struct kmem_cache *svc_rdma_map_cachep; +/* WR context cache. Created in svc_rdma.c */ +extern struct kmem_cache *svc_rdma_ctxt_cachep; +/* Workqueue created in svc_rdma.c */ +extern struct workqueue_struct *svc_rdma_wq; + #endif /* _LINUX_SUNRPC_XPRT_RDMA_H */ -- cgit v1.2.3-70-g09d2 From d24433cdc91c0ed15938d2a6ee9e3e1b00fcfaa3 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Thu, 16 Feb 2012 20:57:17 +0200 Subject: nfsd41: implement NFS4_SHARE_WANT_NO_DELEG, NFS4_OPEN_DELEGATE_NONE_EXT, why_no_deleg Respect client request for not getting a delegation in NFSv4.1 Appropriately return delegation "type" NFS4_OPEN_DELEGATE_NONE_EXT and WND4_NOT_WANTED reason. [nfsd41: add missing break when encoding op_why_no_deleg] Signed-off-by: Benny Halevy Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++------ fs/nfsd/nfs4xdr.c | 14 ++++++++++++ fs/nfsd/xdr4.h | 1 + include/linux/nfs4.h | 15 ++++++++++++- 4 files changed, 82 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index f1b74a74ec4..967c677c2e5 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -2866,7 +2866,7 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open, struct nfs4_ol_ struct nfs4_delegation *dp; struct nfs4_openowner *oo = container_of(stp->st_stateowner, struct nfs4_openowner, oo_owner); int cb_up; - int status, flag = 0; + int status = 0, flag = 0; cb_up = nfsd4_cb_channel_good(oo->oo_owner.so_client); flag = NFS4_OPEN_DELEGATE_NONE; @@ -2907,11 +2907,32 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open, struct nfs4_ol_ dprintk("NFSD: delegation stateid=" STATEID_FMT "\n", STATEID_VAL(&dp->dl_stid.sc_stateid)); out: - if (open->op_claim_type == NFS4_OPEN_CLAIM_PREVIOUS - && flag == NFS4_OPEN_DELEGATE_NONE - && open->op_delegate_type != NFS4_OPEN_DELEGATE_NONE) - dprintk("NFSD: WARNING: refusing delegation reclaim\n"); open->op_delegate_type = flag; + if (flag == NFS4_OPEN_DELEGATE_NONE) { + if (open->op_claim_type == NFS4_OPEN_CLAIM_PREVIOUS && + open->op_delegate_type != NFS4_OPEN_DELEGATE_NONE) + dprintk("NFSD: WARNING: refusing delegation reclaim\n"); + + if (open->op_deleg_want) { + open->op_delegate_type = NFS4_OPEN_DELEGATE_NONE_EXT; + if (status == -EAGAIN) + open->op_why_no_deleg = WND4_CONTENTION; + else { + open->op_why_no_deleg = WND4_RESOURCE; + switch (open->op_deleg_want) { + case NFS4_SHARE_WANT_READ_DELEG: + case NFS4_SHARE_WANT_WRITE_DELEG: + case NFS4_SHARE_WANT_ANY_DELEG: + break; + case NFS4_SHARE_WANT_CANCEL: + open->op_why_no_deleg = WND4_CANCELLED; + break; + case NFS4_SHARE_WANT_NO_DELEG: + BUG(); /* not supposed to get here */ + } + } + } + } return; out_free: nfs4_put_delegation(dp); @@ -2981,20 +3002,45 @@ nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nf update_stateid(&stp->st_stid.sc_stateid); memcpy(&open->op_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t)); - if (nfsd4_has_session(&resp->cstate)) + if (nfsd4_has_session(&resp->cstate)) { open->op_openowner->oo_flags |= NFS4_OO_CONFIRMED; + if (open->op_deleg_want & NFS4_SHARE_WANT_NO_DELEG) { + open->op_delegate_type = NFS4_OPEN_DELEGATE_NONE_EXT; + open->op_why_no_deleg = WND4_NOT_WANTED; + goto nodeleg; + } + } + /* * Attempt to hand out a delegation. No error return, because the * OPEN succeeds even if we fail. */ nfs4_open_delegation(current_fh, open, stp); - +nodeleg: status = nfs_ok; dprintk("%s: stateid=" STATEID_FMT "\n", __func__, STATEID_VAL(&stp->st_stid.sc_stateid)); out: + /* 4.1 client trying to upgrade/downgrade delegation? */ + if (open->op_delegate_type == NFS4_OPEN_DELEGATE_NONE && dp && + open->op_deleg_want) { + if (open->op_deleg_want == NFS4_SHARE_WANT_READ_DELEG && + dp->dl_type == NFS4_OPEN_DELEGATE_WRITE) { + open->op_delegate_type = NFS4_OPEN_DELEGATE_NONE_EXT; + open->op_why_no_deleg = WND4_NOT_SUPP_DOWNGRADE; + } else if (open->op_deleg_want == NFS4_SHARE_WANT_WRITE_DELEG && + dp->dl_type == NFS4_OPEN_DELEGATE_WRITE) { + open->op_delegate_type = NFS4_OPEN_DELEGATE_NONE_EXT; + open->op_why_no_deleg = WND4_NOT_SUPP_UPGRADE; + } + /* Otherwise the client must be confused wanting a delegation + * it already has, therefore we don't return + * NFS4_OPEN_DELEGATE_NONE_EXT and reason. + */ + } + if (fp) put_nfs4_file(fp); if (status == 0 && open->op_claim_type == NFS4_OPEN_CLAIM_PREVIOUS) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index a58f2064f47..f8fcddca041 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -2849,6 +2849,20 @@ nfsd4_encode_open(struct nfsd4_compoundres *resp, __be32 nfserr, struct nfsd4_op WRITE32(0); /* XXX: is NULL principal ok? */ ADJUST_ARGS(); break; + case NFS4_OPEN_DELEGATE_NONE_EXT: /* 4.1 */ + switch (open->op_why_no_deleg) { + case WND4_CONTENTION: + case WND4_RESOURCE: + RESERVE_SPACE(8); + WRITE32(open->op_why_no_deleg); + WRITE32(0); /* deleg signaling not supported yet */ + break; + default: + RESERVE_SPACE(4); + WRITE32(open->op_why_no_deleg); + } + ADJUST_ARGS(); + break; default: BUG(); } diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h index 7110a082275..b89781f1477 100644 --- a/fs/nfsd/xdr4.h +++ b/fs/nfsd/xdr4.h @@ -223,6 +223,7 @@ struct nfsd4_open { struct xdr_netobj op_fname; /* request - everything but CLAIM_PREV */ u32 op_delegate_type; /* request - CLAIM_PREV only */ stateid_t op_delegate_stateid; /* request - response */ + u32 op_why_no_deleg; /* response - DELEG_NONE_EXT only */ u32 op_create; /* request */ u32 op_createmode; /* request */ u32 op_bmval[3]; /* request */ diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 32345c2805c..8cdde4d1fad 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -441,7 +441,20 @@ enum limit_by4 { enum open_delegation_type4 { NFS4_OPEN_DELEGATE_NONE = 0, NFS4_OPEN_DELEGATE_READ = 1, - NFS4_OPEN_DELEGATE_WRITE = 2 + NFS4_OPEN_DELEGATE_WRITE = 2, + NFS4_OPEN_DELEGATE_NONE_EXT = 3, /* 4.1 */ +}; + +enum why_no_delegation4 { /* new to v4.1 */ + WND4_NOT_WANTED = 0, + WND4_CONTENTION = 1, + WND4_RESOURCE = 2, + WND4_NOT_SUPP_FTYPE = 3, + WND4_WRITE_DELEG_NOT_SUPP_FTYPE = 4, + WND4_NOT_SUPP_UPGRADE = 5, + WND4_NOT_SUPP_DOWNGRADE = 6, + WND4_CANCELLED = 7, + WND4_IS_DIR = 8, }; enum lock_type4 { -- cgit v1.2.3-70-g09d2 From 8028dcea8abbbd51b5156e40ea214c20b559cd01 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Fri, 3 Feb 2012 23:34:56 +0800 Subject: slub: per cpu partial statistics change This patch split the cpu_partial_free into 2 parts: cpu_partial_node, PCP refilling times from node partial; and same name cpu_partial_free, PCP refilling times in slab_free slow path. A new statistic 'cpu_partial_drain' is added to get PCP drain to node partial times. These info are useful when do PCP tunning. The slabinfo.c code is unchanged, since cpu_partial_node is not on slow path. Signed-off-by: Alex Shi Acked-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 6 ++++-- mm/slub.c | 12 +++++++++--- 2 files changed, 13 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index a32bcfdc783..6388a6681af 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -21,7 +21,7 @@ enum stat_item { FREE_FROZEN, /* Freeing to frozen slab */ FREE_ADD_PARTIAL, /* Freeing moves slab to partial list */ FREE_REMOVE_PARTIAL, /* Freeing removes last object */ - ALLOC_FROM_PARTIAL, /* Cpu slab acquired from partial list */ + ALLOC_FROM_PARTIAL, /* Cpu slab acquired from node partial list */ ALLOC_SLAB, /* Cpu slab acquired from page allocator */ ALLOC_REFILL, /* Refill cpu slab from slab freelist */ ALLOC_NODE_MISMATCH, /* Switching cpu slab */ @@ -37,7 +37,9 @@ enum stat_item { CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ CPU_PARTIAL_ALLOC, /* Used cpu partial on alloc */ - CPU_PARTIAL_FREE, /* USed cpu partial on free */ + CPU_PARTIAL_FREE, /* Refill cpu partial on free */ + CPU_PARTIAL_NODE, /* Refill cpu partial from node partial */ + CPU_PARTIAL_DRAIN, /* Drain cpu partial to node partial */ NR_SLUB_STAT_ITEMS }; struct kmem_cache_cpu { diff --git a/mm/slub.c b/mm/slub.c index b6666eb3d9c..24132edcfe3 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1566,6 +1566,7 @@ static void *get_partial_node(struct kmem_cache *s, } else { page->freelist = t; available = put_cpu_partial(s, page, 0); + stat(s, CPU_PARTIAL_NODE); } if (kmem_cache_debug(s) || available > s->cpu_partial / 2) break; @@ -1979,6 +1980,7 @@ int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain) local_irq_restore(flags); pobjects = 0; pages = 0; + stat(s, CPU_PARTIAL_DRAIN); } } @@ -1990,7 +1992,6 @@ int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain) page->next = oldpage; } while (this_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page) != oldpage); - stat(s, CPU_PARTIAL_FREE); return pobjects; } @@ -2474,9 +2475,10 @@ static void __slab_free(struct kmem_cache *s, struct page *page, * If we just froze the page then put it onto the * per cpu partial list. */ - if (new.frozen && !was_frozen) + if (new.frozen && !was_frozen) { put_cpu_partial(s, page, 1); - + stat(s, CPU_PARTIAL_FREE); + } /* * The list lock was not taken therefore no list * activity can be necessary. @@ -5069,6 +5071,8 @@ STAT_ATTR(CMPXCHG_DOUBLE_CPU_FAIL, cmpxchg_double_cpu_fail); STAT_ATTR(CMPXCHG_DOUBLE_FAIL, cmpxchg_double_fail); STAT_ATTR(CPU_PARTIAL_ALLOC, cpu_partial_alloc); STAT_ATTR(CPU_PARTIAL_FREE, cpu_partial_free); +STAT_ATTR(CPU_PARTIAL_NODE, cpu_partial_node); +STAT_ATTR(CPU_PARTIAL_DRAIN, cpu_partial_drain); #endif static struct attribute *slab_attrs[] = { @@ -5134,6 +5138,8 @@ static struct attribute *slab_attrs[] = { &cmpxchg_double_cpu_fail_attr.attr, &cpu_partial_alloc_attr.attr, &cpu_partial_free_attr.attr, + &cpu_partial_node_attr.attr, + &cpu_partial_drain_attr.attr, #endif #ifdef CONFIG_FAILSLAB &failslab_attr.attr, -- cgit v1.2.3-70-g09d2 From abe06082d07fcb0673cb93338c1d6f037fdc375b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jan 2012 22:13:52 +0000 Subject: MFD: mcp/ucb1x00: separate ucb1x00 driver data from the MCP data Patch taken from 5dd7bf59e0 (ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.) by Jochen Friedrich . This adds just the codec data part of the patch. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 7 ++++++- arch/arm/mach-sa1100/include/mach/mcp.h | 2 +- arch/arm/mach-sa1100/simpad.c | 7 ++++++- drivers/mfd/mcp-core.c | 3 ++- drivers/mfd/mcp-sa11x0.c | 3 +-- drivers/mfd/ucb1x00-core.c | 7 ++++--- include/linux/mfd/mcp.h | 3 +-- include/linux/mfd/ucb1x00.h | 3 +++ 8 files changed, 24 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index efa2bc132cb..0e735978515 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -85,10 +86,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; +static struct ucb1x00_plat_data collie_ucb1x00_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, +}; + static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .gpio_base = COLLIE_TC35143_GPIO_BASE, + .codec_pdata = &collie_ucb1x00_data, }; /* diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index ed1a331508a..4b2860ae382 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -16,7 +16,7 @@ struct mcp_plat_data { u32 mccr0; u32 mccr1; unsigned int sclk_rate; - int gpio_base; + void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 3aa36ec2103..81506562ee2 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -187,10 +188,14 @@ static struct resource simpad_flash_resources [] = { } }; +static struct ucb1x00_plat_data simpad_ucb1x00_data = { + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, +}; + static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, + .codec_pdata = &simpad_ucb1x00_data, }; diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 280a4f8a787..c409d632714 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -217,8 +217,9 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) } EXPORT_SYMBOL(mcp_host_alloc); -int mcp_host_add(struct mcp *mcp) +int mcp_host_add(struct mcp *mcp, void *pdata) { + mcp->attached_device.platform_data = pdata; dev_set_name(&mcp->attached_device, "mcp0"); return device_add(&mcp->attached_device); } diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 420710b19f2..960ebc79038 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -194,7 +194,6 @@ static int mcp_sa11x0_probe(struct platform_device *dev) mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; mcp->sclk_rate = data->sclk_rate; - mcp->gpio_base = data->gpio_base; m = priv(mcp); m->mccr0 = data->mccr0 | 0x7f7f; @@ -229,7 +228,7 @@ static int mcp_sa11x0_probe(struct platform_device *dev) mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / mcp->sclk_rate; - ret = mcp_host_add(mcp); + ret = mcp_host_add(mcp, data->codec_pdata); if (ret == 0) return 0; diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index f2fb4205467..6825169b06f 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -534,6 +534,7 @@ static int ucb1x00_probe(struct mcp *mcp) { struct ucb1x00 *ucb; struct ucb1x00_driver *drv; + struct ucb1x00_plat_data *pdata; unsigned int id; int ret = -ENODEV; int temp; @@ -551,7 +552,7 @@ static int ucb1x00_probe(struct mcp *mcp) if (!ucb) goto err_disable; - + pdata = mcp->attached_device.platform_data; ucb->dev.class = &ucb1x00_class; ucb->dev.parent = &mcp->attached_device; dev_set_name(&ucb->dev, "ucb1x00"); @@ -570,9 +571,9 @@ static int ucb1x00_probe(struct mcp *mcp) } ucb->gpio.base = -1; - if (mcp->gpio_base != 0) { + if (pdata && pdata->gpio_base) { ucb->gpio.label = dev_name(&ucb->dev); - ucb->gpio.base = mcp->gpio_base; + ucb->gpio.base = pdata->gpio_base; ucb->gpio.ngpio = 10; ucb->gpio.set = ucb1x00_gpio_set; ucb->gpio.get = ucb1x00_gpio_get; diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index dfe7e517ad9..bfcdf6d3f1b 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -20,7 +20,6 @@ struct mcp { unsigned int sclk_rate; unsigned int rw_timeout; struct device attached_device; - int gpio_base; }; struct mcp_ops { @@ -41,7 +40,7 @@ void mcp_disable(struct mcp *); #define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_add(struct mcp *); +int mcp_host_add(struct mcp *, void *); void mcp_host_del(struct mcp *); void mcp_host_free(struct mcp *); diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 4321f044d1e..731b23a656c 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -104,6 +104,9 @@ #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) #define UCB_MODE_AUD_OFF_CAN (1 << 13) +struct ucb1x00_plat_data { + int gpio_base; +}; struct ucb1x00_irq { void *devid; -- cgit v1.2.3-70-g09d2 From 2f7510c6070932371e0b842a5470ce7190dcf162 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Jan 2012 19:02:25 +0000 Subject: MFD: ucb1x00-core: add handling for ucb1x00 reset Provide a way to handle the software controlled ucb1x00 reset signal from the ucb1x00-core driver without having to code platform specifics into these drivers. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 17 +++++++++++++---- include/linux/mfd/ucb1x00.h | 7 +++++++ 2 files changed, 20 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index cc1c0dce7bd..42eee633b86 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -530,13 +530,17 @@ static struct class ucb1x00_class = { static int ucb1x00_probe(struct mcp *mcp) { - struct ucb1x00 *ucb; + struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00_driver *drv; - struct ucb1x00_plat_data *pdata; + struct ucb1x00 *ucb; unsigned int id; int ret = -ENODEV; int temp; + /* Tell the platform to deassert the UCB1x00 reset */ + if (pdata && pdata->reset) + pdata->reset(UCB_RST_PROBE); + mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); @@ -550,7 +554,6 @@ static int ucb1x00_probe(struct mcp *mcp) if (!ucb) goto err_disable; - pdata = mcp->attached_device.platform_data; ucb->dev.class = &ucb1x00_class; ucb->dev.parent = &mcp->attached_device; dev_set_name(&ucb->dev, "ucb1x00"); @@ -606,7 +609,7 @@ static int ucb1x00_probe(struct mcp *mcp) } mutex_unlock(&ucb1x00_mutex); - goto out; + return ret; err_irq: free_irq(ucb->irq, ucb); @@ -618,11 +621,14 @@ static int ucb1x00_probe(struct mcp *mcp) err_disable: mcp_disable(mcp); out: + if (pdata && pdata->reset) + pdata->reset(UCB_RST_PROBE_FAIL); return ret; } static void ucb1x00_remove(struct mcp *mcp) { + struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct list_head *l, *n; int ret; @@ -643,6 +649,9 @@ static void ucb1x00_remove(struct mcp *mcp) free_irq(ucb->irq, ucb); device_unregister(&ucb->dev); + + if (pdata && pdata->reset) + pdata->reset(UCB_RST_REMOVE); } int ucb1x00_register_driver(struct ucb1x00_driver *drv) diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 731b23a656c..fd088cc6a4c 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -104,7 +104,14 @@ #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) #define UCB_MODE_AUD_OFF_CAN (1 << 13) +enum ucb1x00_reset { + UCB_RST_PROBE, + UCB_RST_REMOVE, + UCB_RST_PROBE_FAIL, +}; + struct ucb1x00_plat_data { + void (*reset)(enum ucb1x00_reset); int gpio_base; }; -- cgit v1.2.3-70-g09d2 From cae154767a96563d33924872aacfdc63d584f707 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 09:33:38 +0000 Subject: MFD: ucb1x00-core: use mutexes instead of semaphores Convert the ucb1x00 driver to use mutexes rather than the depreciated semaphores for exclusive access to the ADC. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 15 +++++++-------- include/linux/mfd/ucb1x00.h | 4 ++-- 2 files changed, 9 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index c2757c11ce7..7386f822d4c 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -27,7 +27,6 @@ #include #include #include -#include static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); @@ -99,7 +98,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear) * ucb1x00_enable must have been called to enable the comms * before using this function. * - * This function does not take any semaphores or spinlocks. + * This function does not take any mutexes or spinlocks. */ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb) { @@ -183,7 +182,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset * Any code wishing to use the ADC converter must call this * function prior to using it. * - * This function takes the ADC semaphore to prevent two or more + * This function takes the ADC mutex to prevent two or more * concurrent uses, and therefore may sleep. As a result, it * can only be called from process context, not interrupt * context. @@ -193,7 +192,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset */ void ucb1x00_adc_enable(struct ucb1x00 *ucb) { - down(&ucb->adc_sem); + mutex_lock(&ucb->adc_mutex); ucb->adc_cr |= UCB_ADC_ENA; @@ -215,7 +214,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb) * complete (2 frames max without sync). * * If called for a synchronised ADC conversion, it may sleep - * with the ADC semaphore held. + * with the ADC mutex held. */ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync) { @@ -243,7 +242,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync) * ucb1x00_adc_disable - disable the ADC converter * @ucb: UCB1x00 structure describing chip * - * Disable the ADC converter and release the ADC semaphore. + * Disable the ADC converter and release the ADC mutex. */ void ucb1x00_adc_disable(struct ucb1x00 *ucb) { @@ -251,7 +250,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb) ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr); ucb1x00_disable(ucb); - up(&ucb->adc_sem); + mutex_unlock(&ucb->adc_mutex); } /* @@ -560,7 +559,7 @@ static int ucb1x00_probe(struct mcp *mcp) spin_lock_init(&ucb->lock); spin_lock_init(&ucb->io_lock); - sema_init(&ucb->adc_sem, 1); + mutex_init(&ucb->adc_mutex); ucb->id = id; ucb->mcp = mcp; diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index fd088cc6a4c..a4b954381c2 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -12,7 +12,7 @@ #include #include -#include +#include #define UCB_IO_DATA 0x00 #define UCB_IO_DIR 0x01 @@ -124,7 +124,7 @@ struct ucb1x00 { spinlock_t lock; struct mcp *mcp; unsigned int irq; - struct semaphore adc_sem; + struct mutex adc_mutex; spinlock_t io_lock; u16 id; u16 io_dir; -- cgit v1.2.3-70-g09d2 From 5a09b7120a965a7d7e8494d0ed509135bbce0118 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 16:36:30 +0000 Subject: MFD: ucb1x00-core: convert to use dev_pm_ops Convert the ucb1x00-core driver to use dev_pm_ops rather than the legacy members in the mcp driver. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 32 ++++++++++++++++++-------------- include/linux/mfd/ucb1x00.h | 2 +- 2 files changed, 19 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index ed2a4b2e518..6fab8255754 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -26,6 +26,7 @@ #include #include #include +#include #include static DEFINE_MUTEX(ucb1x00_mutex); @@ -697,47 +698,50 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv) mutex_unlock(&ucb1x00_mutex); } -static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state) +static int ucb1x00_suspend(struct device *dev) { - struct ucb1x00 *ucb = mcp_get_drvdata(mcp); - struct ucb1x00_dev *dev; + struct ucb1x00 *ucb = dev_get_drvdata(dev); + struct ucb1x00_dev *udev; mutex_lock(&ucb1x00_mutex); - list_for_each_entry(dev, &ucb->devs, dev_node) { - if (dev->drv->suspend) - dev->drv->suspend(dev, state); + list_for_each_entry(udev, &ucb->devs, dev_node) { + if (udev->drv->suspend) + udev->drv->suspend(udev); } mutex_unlock(&ucb1x00_mutex); return 0; } -static int ucb1x00_resume(struct mcp *mcp) +static int ucb1x00_resume(struct device *dev) { - struct ucb1x00 *ucb = mcp_get_drvdata(mcp); - struct ucb1x00_dev *dev; + struct ucb1x00 *ucb = dev_get_drvdata(dev); + struct ucb1x00_dev *udev; ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); ucb1x00_disable(ucb); mutex_lock(&ucb1x00_mutex); - list_for_each_entry(dev, &ucb->devs, dev_node) { - if (dev->drv->resume) - dev->drv->resume(dev); + list_for_each_entry(udev, &ucb->devs, dev_node) { + if (udev->drv->resume) + udev->drv->resume(udev); } mutex_unlock(&ucb1x00_mutex); return 0; } +static const struct dev_pm_ops ucb1x00_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume) +}; + static struct mcp_driver ucb1x00_driver = { .drv = { .name = "ucb1x00", .owner = THIS_MODULE, + .pm = &ucb1x00_pm_ops, }, .probe = ucb1x00_probe, .remove = ucb1x00_remove, - .suspend = ucb1x00_suspend, - .resume = ucb1x00_resume, }; static int __init ucb1x00_init(void) diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index a4b954381c2..253c12c157a 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -154,7 +154,7 @@ struct ucb1x00_driver { struct list_head devs; int (*add)(struct ucb1x00_dev *dev); void (*remove)(struct ucb1x00_dev *dev); - int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); + int (*suspend)(struct ucb1x00_dev *dev); int (*resume)(struct ucb1x00_dev *dev); }; -- cgit v1.2.3-70-g09d2 From cf4abfcc0df2985ff6061f74e63b8353f2a1d0bc Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 16:38:50 +0000 Subject: MFD: mcp-core: remove legacy driver suspend/resume methods The legacy driver suspend/resume methods are no longer used, so get rid of them. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/mcp-core.c | 28 ---------------------------- include/linux/mfd/mcp.h | 2 -- 2 files changed, 30 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index c409d632714..6acf2e03f2b 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -47,39 +47,11 @@ static int mcp_bus_remove(struct device *dev) return 0; } -static int mcp_bus_suspend(struct device *dev, pm_message_t state) -{ - struct mcp *mcp = to_mcp(dev); - int ret = 0; - - if (dev->driver) { - struct mcp_driver *drv = to_mcp_driver(dev->driver); - - ret = drv->suspend(mcp, state); - } - return ret; -} - -static int mcp_bus_resume(struct device *dev) -{ - struct mcp *mcp = to_mcp(dev); - int ret = 0; - - if (dev->driver) { - struct mcp_driver *drv = to_mcp_driver(dev->driver); - - ret = drv->resume(mcp); - } - return ret; -} - static struct bus_type mcp_bus_type = { .name = "mcp", .match = mcp_bus_match, .probe = mcp_bus_probe, .remove = mcp_bus_remove, - .suspend = mcp_bus_suspend, - .resume = mcp_bus_resume, }; /** diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index bfcdf6d3f1b..a9e8bd15767 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -48,8 +48,6 @@ struct mcp_driver { struct device_driver drv; int (*probe)(struct mcp *); void (*remove)(struct mcp *); - int (*suspend)(struct mcp *, pm_message_t); - int (*resume)(struct mcp *); }; int mcp_driver_register(struct mcp_driver *); -- cgit v1.2.3-70-g09d2 From a3364409c4af8bae42d04def48dc11409787e503 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 14:58:28 +0000 Subject: MFD: ucb1x00: convert to use genirq Convert the ucb1x00 driver to use genirq's interrupt services, rather than its own private implementation. This allows a wider range of drivers to use the GPIO interrupts (such as the gpio_keys driver) without being aware of the UCB1x00's private IRQ system. This prevents the UCB1x00 core driver from being built as a module, so adjust the configuration to add that restriction. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/Kconfig | 5 +- drivers/mfd/ucb1x00-core.c | 247 +++++++++++++++++--------------------------- drivers/mfd/ucb1x00-ts.c | 37 +++++-- include/linux/mfd/ucb1x00.h | 22 +--- 4 files changed, 132 insertions(+), 179 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index cd13e9f2f5e..28a301b2857 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -847,8 +847,9 @@ config MCP_SA11X0 # Chip drivers config MCP_UCB1200 - tristate "Support for UCB1200 / UCB1300" - depends on MCP + bool "Support for UCB1200 / UCB1300" + depends on MCP_SA11X0 + select MCP config MCP_UCB1200_TS tristate "Touchscreen interface support" diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 6fab8255754..400604d3878 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -178,6 +179,13 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset return 0; } +static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + + return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO; +} + /* * UCB1300 data sheet says we must: * 1. enable ADC => 5us (including reference startup time) @@ -274,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb) * SIBCLK to talk to the chip. We leave the clock running until * we have finished processing all interrupts from the chip. */ -static irqreturn_t ucb1x00_irq(int irqnr, void *devid) +static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc) { - struct ucb1x00 *ucb = devid; - struct ucb1x00_irq *irq; + struct ucb1x00 *ucb = irq_desc_get_handler_data(desc); unsigned int isr, i; ucb1x00_enable(ucb); @@ -285,157 +292,84 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid) ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr); ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0); - for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++) - if (isr & 1 && irq->fn) - irq->fn(i, irq->devid); + for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++) + if (isr & 1) + generic_handle_irq(ucb->irq_base + i); ucb1x00_disable(ucb); - - return IRQ_HANDLED; } -/** - * ucb1x00_hook_irq - hook a UCB1x00 interrupt - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @fn: function to call when interrupt is triggered - * @devid: device id to pass to interrupt handler - * - * Hook the specified interrupt. You can only register one handler - * for each interrupt source. The interrupt source is not enabled - * by this function; use ucb1x00_enable_irq instead. - * - * Interrupt handlers will be called with other interrupts enabled. - * - * Returns zero on success, or one of the following errors: - * -EINVAL if the interrupt index is invalid - * -EBUSY if the interrupt has already been hooked - */ -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid) +static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask) { - struct ucb1x00_irq *irq; - int ret = -EINVAL; - - if (idx < 16) { - irq = ucb->irq_handler + idx; - ret = -EBUSY; - - spin_lock_irq(&ucb->lock); - if (irq->fn == NULL) { - irq->devid = devid; - irq->fn = fn; - ret = 0; - } - spin_unlock_irq(&ucb->lock); - } - return ret; + ucb1x00_enable(ucb); + if (ucb->irq_ris_enbl & mask) + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + if (ucb->irq_fal_enbl & mask) + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + ucb1x00_disable(ucb); } -/** - * ucb1x00_enable_irq - enable an UCB1x00 interrupt source - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @edges: interrupt edges to enable - * - * Enable the specified interrupt to trigger on %UCB_RISING, - * %UCB_FALLING or both edges. The interrupt should have been - * hooked by ucb1x00_hook_irq. - */ -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges) +static void ucb1x00_irq_noop(struct irq_data *data) { - unsigned long flags; - - if (idx < 16) { - spin_lock_irqsave(&ucb->lock, flags); - - ucb1x00_enable(ucb); - if (edges & UCB_RISING) { - ucb->irq_ris_enbl |= 1 << idx; - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - } - if (edges & UCB_FALLING) { - ucb->irq_fal_enbl |= 1 << idx; - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - } - ucb1x00_disable(ucb); - spin_unlock_irqrestore(&ucb->lock, flags); - } } -/** - * ucb1x00_disable_irq - disable an UCB1x00 interrupt source - * @ucb: UCB1x00 structure describing chip - * @edges: interrupt edges to disable - * - * Disable the specified interrupt triggering on the specified - * (%UCB_RISING, %UCB_FALLING or both) edges. - */ -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges) +static void ucb1x00_irq_mask(struct irq_data *data) { - unsigned long flags; + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - if (idx < 16) { - spin_lock_irqsave(&ucb->lock, flags); - - ucb1x00_enable(ucb); - if (edges & UCB_RISING) { - ucb->irq_ris_enbl &= ~(1 << idx); - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - } - if (edges & UCB_FALLING) { - ucb->irq_fal_enbl &= ~(1 << idx); - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - } - ucb1x00_disable(ucb); - spin_unlock_irqrestore(&ucb->lock, flags); - } + raw_spin_lock(&ucb->irq_lock); + ucb->irq_mask &= ~mask; + ucb1x00_irq_update(ucb, mask); + raw_spin_unlock(&ucb->irq_lock); } -/** - * ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @devid: device id. - * - * Disable the interrupt source and remove the handler. devid must - * match the devid passed when hooking the interrupt. - * - * Returns zero on success, or one of the following errors: - * -EINVAL if the interrupt index is invalid - * -ENOENT if devid does not match - */ -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid) +static void ucb1x00_irq_unmask(struct irq_data *data) { - struct ucb1x00_irq *irq; - int ret; + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - if (idx >= 16) - goto bad; - - irq = ucb->irq_handler + idx; - ret = -ENOENT; + raw_spin_lock(&ucb->irq_lock); + ucb->irq_mask |= mask; + ucb1x00_irq_update(ucb, mask); + raw_spin_unlock(&ucb->irq_lock); +} - spin_lock_irq(&ucb->lock); - if (irq->devid == devid) { - ucb->irq_ris_enbl &= ~(1 << idx); - ucb->irq_fal_enbl &= ~(1 << idx); +static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - ucb1x00_enable(ucb); - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - ucb1x00_disable(ucb); + raw_spin_lock(&ucb->irq_lock); + if (type & IRQ_TYPE_EDGE_RISING) + ucb->irq_ris_enbl |= mask; + else + ucb->irq_ris_enbl &= ~mask; - irq->fn = NULL; - irq->devid = NULL; - ret = 0; + if (type & IRQ_TYPE_EDGE_FALLING) + ucb->irq_fal_enbl |= mask; + else + ucb->irq_fal_enbl &= ~mask; + if (ucb->irq_mask & mask) { + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); } - spin_unlock_irq(&ucb->lock); - return ret; + raw_spin_unlock(&ucb->irq_lock); -bad: - printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx); - return -EINVAL; + return 0; } +static struct irq_chip ucb1x00_irqchip = { + .name = "ucb1x00", + .irq_ack = ucb1x00_irq_noop, + .irq_mask = ucb1x00_irq_mask, + .irq_unmask = ucb1x00_irq_unmask, + .irq_set_type = ucb1x00_irq_set_type, +}; + static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv) { struct ucb1x00_dev *dev; @@ -545,9 +479,8 @@ static int ucb1x00_probe(struct mcp *mcp) struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00_driver *drv; struct ucb1x00 *ucb; - unsigned int id; + unsigned id, i, irq_base; int ret = -ENODEV; - int temp; /* Tell the platform to deassert the UCB1x00 reset */ if (pdata && pdata->reset) @@ -572,7 +505,7 @@ static int ucb1x00_probe(struct mcp *mcp) ucb->dev.parent = &mcp->attached_device; dev_set_name(&ucb->dev, "ucb1x00"); - spin_lock_init(&ucb->lock); + raw_spin_lock_init(&ucb->irq_lock); spin_lock_init(&ucb->io_lock); mutex_init(&ucb->adc_mutex); @@ -593,6 +526,26 @@ static int ucb1x00_probe(struct mcp *mcp) } ucb->gpio.base = -1; + irq_base = pdata ? pdata->irq_base : 0; + ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1); + if (ucb->irq_base < 0) { + dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n", + ucb->irq_base); + goto err_irq_alloc; + } + + for (i = 0; i < 16; i++) { + unsigned irq = ucb->irq_base + i; + + irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq); + irq_set_chip_data(irq, ucb); + set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST); + } + + irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(ucb->irq, ucb); + irq_set_chained_handler(ucb->irq, ucb1x00_irq); + if (pdata && pdata->gpio_base) { ucb->gpio.label = dev_name(&ucb->dev); ucb->gpio.dev = &ucb->dev; @@ -603,20 +556,13 @@ static int ucb1x00_probe(struct mcp *mcp) ucb->gpio.get = ucb1x00_gpio_get; ucb->gpio.direction_input = ucb1x00_gpio_direction_input; ucb->gpio.direction_output = ucb1x00_gpio_direction_output; + ucb->gpio.to_irq = ucb1x00_to_irq; ret = gpiochip_add(&ucb->gpio); if (ret) goto err_gpio_add; } else dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); - ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, - "UCB1x00", ucb); - if (ret) { - dev_err(&ucb->dev, "ucb1x00: unable to grab irq%d: %d\n", - ucb->irq, ret); - goto err_irq; - } - mcp_set_drvdata(mcp, ucb); INIT_LIST_HEAD(&ucb->devs); @@ -629,10 +575,11 @@ static int ucb1x00_probe(struct mcp *mcp) return ret; - err_irq: - if (ucb->gpio.base != -1) - temp = gpiochip_remove(&ucb->gpio); err_gpio_add: + irq_set_chained_handler(ucb->irq, NULL); + err_irq_alloc: + if (ucb->irq_base > 0) + irq_free_descs(ucb->irq_base, 16); err_no_irq: device_del(&ucb->dev); err_dev_add: @@ -664,7 +611,8 @@ static void ucb1x00_remove(struct mcp *mcp) dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret); } - free_irq(ucb->irq, ucb); + irq_set_chained_handler(ucb->irq, NULL); + irq_free_descs(ucb->irq_base, 16); device_unregister(&ucb->dev); if (pdata && pdata->reset) @@ -772,11 +720,6 @@ EXPORT_SYMBOL(ucb1x00_adc_enable); EXPORT_SYMBOL(ucb1x00_adc_read); EXPORT_SYMBOL(ucb1x00_adc_disable); -EXPORT_SYMBOL(ucb1x00_hook_irq); -EXPORT_SYMBOL(ucb1x00_free_irq); -EXPORT_SYMBOL(ucb1x00_enable_irq); -EXPORT_SYMBOL(ucb1x00_disable_irq); - EXPORT_SYMBOL(ucb1x00_register_driver); EXPORT_SYMBOL(ucb1x00_unregister_driver); diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 742d0c7bbbc..1e0e20c0e08 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -20,8 +20,9 @@ #include #include #include -#include +#include #include +#include #include #include #include @@ -41,6 +42,8 @@ struct ucb1x00_ts { struct input_dev *idev; struct ucb1x00 *ucb; + spinlock_t irq_lock; + unsigned irq_disabled; wait_queue_head_t irq_wait; struct task_struct *rtask; u16 x_res; @@ -237,7 +240,12 @@ static int ucb1x00_thread(void *_ts) if (ucb1x00_ts_pen_down(ts)) { set_current_state(TASK_INTERRUPTIBLE); - ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING); + spin_lock_irq(&ts->irq_lock); + if (ts->irq_disabled) { + ts->irq_disabled = 0; + enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX); + } + spin_unlock_irq(&ts->irq_lock); ucb1x00_disable(ts->ucb); /* @@ -280,23 +288,37 @@ static int ucb1x00_thread(void *_ts) * We only detect touch screen _touches_ with this interrupt * handler, and even then we just schedule our task. */ -static void ucb1x00_ts_irq(int idx, void *id) +static irqreturn_t ucb1x00_ts_irq(int irq, void *id) { struct ucb1x00_ts *ts = id; - ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING); + spin_lock(&ts->irq_lock); + ts->irq_disabled = 1; + disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX); + spin_unlock(&ts->irq_lock); wake_up(&ts->irq_wait); + + return IRQ_HANDLED; } static int ucb1x00_ts_open(struct input_dev *idev) { struct ucb1x00_ts *ts = input_get_drvdata(idev); + unsigned long flags = 0; int ret = 0; BUG_ON(ts->rtask); + if (machine_is_collie()) + flags = IRQF_TRIGGER_RISING; + else + flags = IRQF_TRIGGER_FALLING; + + ts->irq_disabled = 0; + init_waitqueue_head(&ts->irq_wait); - ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts); + ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq, + flags, "ucb1x00-ts", ts); if (ret < 0) goto out; @@ -313,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev) if (!IS_ERR(ts->rtask)) { ret = 0; } else { - ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); + free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ts->rtask = NULL; ret = -EFAULT; } @@ -333,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev) kthread_stop(ts->rtask); ucb1x00_enable(ts->ucb); - ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); + free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); ucb1x00_disable(ts->ucb); } @@ -358,6 +380,7 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ts->ucb = dev->ucb; ts->idev = idev; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; + spin_lock_init(&ts->irq_lock); idev->name = "Touchscreen panel"; idev->id.product = ts->ucb->id; diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 253c12c157a..6fb907446c3 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -112,18 +112,15 @@ enum ucb1x00_reset { struct ucb1x00_plat_data { void (*reset)(enum ucb1x00_reset); + unsigned irq_base; int gpio_base; }; -struct ucb1x00_irq { - void *devid; - void (*fn)(int, void *); -}; - struct ucb1x00 { - spinlock_t lock; + raw_spinlock_t irq_lock; struct mcp *mcp; unsigned int irq; + int irq_base; struct mutex adc_mutex; spinlock_t io_lock; u16 id; @@ -132,7 +129,7 @@ struct ucb1x00 { u16 adc_cr; u16 irq_fal_enbl; u16 irq_ris_enbl; - struct ucb1x00_irq irq_handler[16]; + u16 irq_mask; struct device dev; struct list_head node; struct list_head devs; @@ -255,15 +252,4 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); void ucb1x00_adc_enable(struct ucb1x00 *ucb); void ucb1x00_adc_disable(struct ucb1x00 *ucb); -/* - * Which edges of the IRQ do you want to control today? - */ -#define UCB_RISING (1 << 0) -#define UCB_FALLING (1 << 1) - -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); - #endif -- cgit v1.2.3-70-g09d2 From 33237616771bfc29a97f17e74efe3799bb790343 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Jan 2012 20:05:24 +0000 Subject: MFD: ucb1x00-core: add wakeup support Add genirq wakeup support for the ucb1x00 device. This allows an attached gpio_keys driver to wakeup the system. Touchscreen is also possible. When there are no wakeup sources, ask the platform to assert the reset signal to avoid any unexpected behaviour; this also puts the reset signal at the right level when power is removed from the device. Acked-by: Jochen Friedrich Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 59 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/ucb1x00.h | 4 +++ 2 files changed, 63 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 400604d3878..70f02daeb22 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -362,12 +362,32 @@ static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type) return 0; } +static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data; + unsigned mask = 1 << (data->irq - ucb->irq_base); + + if (!pdata || !pdata->can_wakeup) + return -EINVAL; + + raw_spin_lock(&ucb->irq_lock); + if (on) + ucb->irq_wake |= mask; + else + ucb->irq_wake &= ~mask; + raw_spin_unlock(&ucb->irq_lock); + + return 0; +} + static struct irq_chip ucb1x00_irqchip = { .name = "ucb1x00", .irq_ack = ucb1x00_irq_noop, .irq_mask = ucb1x00_irq_mask, .irq_unmask = ucb1x00_irq_unmask, .irq_set_type = ucb1x00_irq_set_type, + .irq_set_wake = ucb1x00_irq_set_wake, }; static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv) @@ -565,6 +585,9 @@ static int ucb1x00_probe(struct mcp *mcp) mcp_set_drvdata(mcp, ucb); + if (pdata) + device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup); + INIT_LIST_HEAD(&ucb->devs); mutex_lock(&ucb1x00_mutex); list_add_tail(&ucb->node, &ucb1x00_devices); @@ -648,6 +671,7 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv) static int ucb1x00_suspend(struct device *dev) { + struct ucb1x00_plat_data *pdata = dev->platform_data; struct ucb1x00 *ucb = dev_get_drvdata(dev); struct ucb1x00_dev *udev; @@ -657,18 +681,53 @@ static int ucb1x00_suspend(struct device *dev) udev->drv->suspend(udev); } mutex_unlock(&ucb1x00_mutex); + + if (ucb->irq_wake) { + unsigned long flags; + + raw_spin_lock_irqsave(&ucb->irq_lock, flags); + ucb1x00_enable(ucb); + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_wake); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_wake); + ucb1x00_disable(ucb); + raw_spin_unlock_irqrestore(&ucb->irq_lock, flags); + + enable_irq_wake(ucb->irq); + } else if (pdata && pdata->reset) + pdata->reset(UCB_RST_SUSPEND); + return 0; } static int ucb1x00_resume(struct device *dev) { + struct ucb1x00_plat_data *pdata = dev->platform_data; struct ucb1x00 *ucb = dev_get_drvdata(dev); struct ucb1x00_dev *udev; + if (!ucb->irq_wake && pdata && pdata->reset) + pdata->reset(UCB_RST_RESUME); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + + if (ucb->irq_wake) { + unsigned long flags; + + raw_spin_lock_irqsave(&ucb->irq_lock, flags); + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + raw_spin_unlock_irqrestore(&ucb->irq_lock, flags); + + disable_irq_wake(ucb->irq); + } ucb1x00_disable(ucb); + mutex_lock(&ucb1x00_mutex); list_for_each_entry(udev, &ucb->devs, dev_node) { if (udev->drv->resume) diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index 6fb907446c3..28af4175636 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -106,6 +106,8 @@ enum ucb1x00_reset { UCB_RST_PROBE, + UCB_RST_RESUME, + UCB_RST_SUSPEND, UCB_RST_REMOVE, UCB_RST_PROBE_FAIL, }; @@ -114,6 +116,7 @@ struct ucb1x00_plat_data { void (*reset)(enum ucb1x00_reset); unsigned irq_base; int gpio_base; + unsigned can_wakeup; }; struct ucb1x00 { @@ -130,6 +133,7 @@ struct ucb1x00 { u16 irq_fal_enbl; u16 irq_ris_enbl; u16 irq_mask; + u16 irq_wake; struct device dev; struct list_head node; struct list_head devs; -- cgit v1.2.3-70-g09d2 From 1dce27c5aa6770e9d195f2bb7db1db3d4dde5591 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 16 Feb 2012 17:49:42 +0000 Subject: Wrap accesses to the fd_sets in struct fdtable Wrap accesses to the fd_sets in struct fdtable (for recording open files and close-on-exec flags) so that we can move away from using fd_sets since we abuse the fd_set structs by not allocating the full-sized structure under normal circumstances and by non-core code looking at the internals of the fd_sets. The first abuse means that use of FD_ZERO() on these fd_sets is not permitted, since that cannot be told about their abnormal lengths. This introduces six wrapper functions for setting, clearing and testing close-on-exec flags and fd-is-open flags: void __set_close_on_exec(int fd, struct fdtable *fdt); void __clear_close_on_exec(int fd, struct fdtable *fdt); bool close_on_exec(int fd, const struct fdtable *fdt); void __set_open_fd(int fd, struct fdtable *fdt); void __clear_open_fd(int fd, struct fdtable *fdt); bool fd_is_open(int fd, const struct fdtable *fdt); Note that I've prepended '__' to the names of the set/clear functions because they require the caller to hold a lock to use them. Note also that I haven't added wrappers for looking behind the scenes at the the array. Possibly that should exist too. Signed-off-by: David Howells Link: http://lkml.kernel.org/r/20120216174942.23314.1364.stgit@warthog.procyon.org.uk Signed-off-by: H. Peter Anvin Cc: Al Viro --- Documentation/filesystems/files.txt | 4 ++-- arch/powerpc/platforms/cell/spufs/coredump.c | 2 +- drivers/staging/android/binder.c | 10 +++++----- fs/autofs4/dev-ioctl.c | 2 +- fs/exec.c | 4 ++-- fs/fcntl.c | 18 ++++++++--------- fs/file.c | 8 ++++---- fs/open.c | 4 ++-- fs/proc/base.c | 2 +- include/linux/fdtable.h | 30 ++++++++++++++++++++++++++++ 10 files changed, 57 insertions(+), 27 deletions(-) (limited to 'include/linux') diff --git a/Documentation/filesystems/files.txt b/Documentation/filesystems/files.txt index ac2facc50d2..46dfc6b038c 100644 --- a/Documentation/filesystems/files.txt +++ b/Documentation/filesystems/files.txt @@ -113,8 +113,8 @@ the fdtable structure - if (fd >= 0) { /* locate_fd() may have expanded fdtable, load the ptr */ fdt = files_fdtable(files); - FD_SET(fd, fdt->open_fds); - FD_CLR(fd, fdt->close_on_exec); + __set_open_fd(fd, fdt); + __clear_close_on_exec(fd, fdt); spin_unlock(&files->file_lock); ..... diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index 03c5fce2a5b..c2c5b078ba8 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -122,7 +122,7 @@ static struct spu_context *coredump_next_context(int *fd) struct spu_context *ctx = NULL; for (; *fd < fdt->max_fds; (*fd)++) { - if (!FD_ISSET(*fd, fdt->open_fds)) + if (!fd_is_open(*fd, fdt)) continue; file = fcheck(*fd); diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 7491801a661..35dd9c370e5 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -408,11 +408,11 @@ repeat: goto repeat; } - FD_SET(fd, fdt->open_fds); + __set_open_fd(fd, fdt); if (flags & O_CLOEXEC) - FD_SET(fd, fdt->close_on_exec); + __set_close_on_exec(fd, fdt); else - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); files->next_fd = fd + 1; #if 1 /* Sanity check */ @@ -453,7 +453,7 @@ static void task_fd_install( static void __put_unused_fd(struct files_struct *files, unsigned int fd) { struct fdtable *fdt = files_fdtable(files); - __FD_CLR(fd, fdt->open_fds); + __clear_open_fd(fd, fdt); if (fd < files->next_fd) files->next_fd = fd; } @@ -479,7 +479,7 @@ static long task_close_fd(struct binder_proc *proc, unsigned int fd) if (!filp) goto out_unlock; rcu_assign_pointer(fdt->fd[fd], NULL); - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); __put_unused_fd(files, fd); spin_unlock(&files->file_lock); retval = filp_close(filp, files); diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 76741d8d778..3dfd615afb6 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -230,7 +230,7 @@ static void autofs_dev_ioctl_fd_install(unsigned int fd, struct file *file) fdt = files_fdtable(files); BUG_ON(fdt->fd[fd] != NULL); rcu_assign_pointer(fdt->fd[fd], file); - FD_SET(fd, fdt->close_on_exec); + __set_close_on_exec(fd, fdt); spin_unlock(&files->file_lock); } diff --git a/fs/exec.c b/fs/exec.c index 92ce83a11e9..22cc38d9e79 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -2078,8 +2078,8 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new) fd_install(0, rp); spin_lock(&cf->file_lock); fdt = files_fdtable(cf); - FD_SET(0, fdt->open_fds); - FD_CLR(0, fdt->close_on_exec); + __set_open_fd(0, fdt); + __clear_close_on_exec(0, fdt); spin_unlock(&cf->file_lock); /* and disallow core files too */ diff --git a/fs/fcntl.c b/fs/fcntl.c index 22764c7c838..75e7c1f3a08 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -32,20 +32,20 @@ void set_close_on_exec(unsigned int fd, int flag) spin_lock(&files->file_lock); fdt = files_fdtable(files); if (flag) - FD_SET(fd, fdt->close_on_exec); + __set_close_on_exec(fd, fdt); else - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); spin_unlock(&files->file_lock); } -static int get_close_on_exec(unsigned int fd) +static bool get_close_on_exec(unsigned int fd) { struct files_struct *files = current->files; struct fdtable *fdt; - int res; + bool res; rcu_read_lock(); fdt = files_fdtable(files); - res = FD_ISSET(fd, fdt->close_on_exec); + res = close_on_exec(fd, fdt); rcu_read_unlock(); return res; } @@ -90,15 +90,15 @@ SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags) err = -EBUSY; fdt = files_fdtable(files); tofree = fdt->fd[newfd]; - if (!tofree && FD_ISSET(newfd, fdt->open_fds)) + if (!tofree && fd_is_open(newfd, fdt)) goto out_unlock; get_file(file); rcu_assign_pointer(fdt->fd[newfd], file); - FD_SET(newfd, fdt->open_fds); + __set_open_fd(newfd, fdt); if (flags & O_CLOEXEC) - FD_SET(newfd, fdt->close_on_exec); + __set_close_on_exec(newfd, fdt); else - FD_CLR(newfd, fdt->close_on_exec); + __clear_close_on_exec(newfd, fdt); spin_unlock(&files->file_lock); if (tofree) diff --git a/fs/file.c b/fs/file.c index 4c6992d8f3b..114fea0a2ce 100644 --- a/fs/file.c +++ b/fs/file.c @@ -366,7 +366,7 @@ struct files_struct *dup_fd(struct files_struct *oldf, int *errorp) * is partway through open(). So make sure that this * fd is available to the new process. */ - FD_CLR(open_files - i, new_fdt->open_fds); + __clear_open_fd(open_files - i, new_fdt); } rcu_assign_pointer(*new_fds++, f); } @@ -460,11 +460,11 @@ repeat: if (start <= files->next_fd) files->next_fd = fd + 1; - FD_SET(fd, fdt->open_fds); + __set_open_fd(fd, fdt); if (flags & O_CLOEXEC) - FD_SET(fd, fdt->close_on_exec); + __set_close_on_exec(fd, fdt); else - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); error = fd; #if 1 /* Sanity check */ diff --git a/fs/open.c b/fs/open.c index 77becc04114..5720854156d 100644 --- a/fs/open.c +++ b/fs/open.c @@ -836,7 +836,7 @@ EXPORT_SYMBOL(dentry_open); static void __put_unused_fd(struct files_struct *files, unsigned int fd) { struct fdtable *fdt = files_fdtable(files); - __FD_CLR(fd, fdt->open_fds); + __clear_open_fd(fd, fdt); if (fd < files->next_fd) files->next_fd = fd; } @@ -1080,7 +1080,7 @@ SYSCALL_DEFINE1(close, unsigned int, fd) if (!filp) goto out_unlock; rcu_assign_pointer(fdt->fd[fd], NULL); - FD_CLR(fd, fdt->close_on_exec); + __clear_close_on_exec(fd, fdt); __put_unused_fd(files, fd); spin_unlock(&files->file_lock); retval = filp_close(filp, files); diff --git a/fs/proc/base.c b/fs/proc/base.c index d4548dd49b0..db6ab4b36a0 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1754,7 +1754,7 @@ static int proc_fd_info(struct inode *inode, struct path *path, char *info) fdt = files_fdtable(files); f_flags = file->f_flags & ~O_CLOEXEC; - if (FD_ISSET(fd, fdt->close_on_exec)) + if (close_on_exec(fd, fdt)) f_flags |= O_CLOEXEC; if (path) { diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 82163c4b32c..7675da2c18f 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -38,6 +38,36 @@ struct fdtable { struct fdtable *next; }; +static inline void __set_close_on_exec(int fd, struct fdtable *fdt) +{ + FD_SET(fd, fdt->close_on_exec); +} + +static inline void __clear_close_on_exec(int fd, struct fdtable *fdt) +{ + FD_CLR(fd, fdt->close_on_exec); +} + +static inline bool close_on_exec(int fd, const struct fdtable *fdt) +{ + return FD_ISSET(fd, fdt->close_on_exec); +} + +static inline void __set_open_fd(int fd, struct fdtable *fdt) +{ + FD_SET(fd, fdt->open_fds); +} + +static inline void __clear_open_fd(int fd, struct fdtable *fdt) +{ + FD_CLR(fd, fdt->open_fds); +} + +static inline bool fd_is_open(int fd, const struct fdtable *fdt) +{ + return FD_ISSET(fd, fdt->open_fds); +} + /* * Open file table structure */ -- cgit v1.2.3-70-g09d2 From 1fd36adcd98c14d2fd97f545293c488775cb2823 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 16 Feb 2012 17:49:54 +0000 Subject: Replace the fd_sets in struct fdtable with an array of unsigned longs Replace the fd_sets in struct fdtable with an array of unsigned longs and then use the standard non-atomic bit operations rather than the FD_* macros. This: (1) Removes the abuses of struct fd_set: (a) Since we don't want to allocate a full fd_set the vast majority of the time, we actually, in effect, just allocate a just-big-enough array of unsigned longs and cast it to an fd_set type - so why bother with the fd_set at all? (b) Some places outside of the core fdtable handling code (such as SELinux) want to look inside the array of unsigned longs hidden inside the fd_set struct for more efficient iteration over the entire set. (2) Eliminates the use of FD_*() macros in the kernel completely. (3) Permits the __FD_*() macros to be deleted entirely where not exposed to userspace. Signed-off-by: David Howells Link: http://lkml.kernel.org/r/20120216174954.23314.48147.stgit@warthog.procyon.org.uk Signed-off-by: H. Peter Anvin Cc: Al Viro --- fs/exec.c | 4 ++-- fs/file.c | 46 ++++++++++++++++++++++------------------------ fs/select.c | 2 +- include/linux/fdtable.h | 28 ++++++++++------------------ kernel/exit.c | 2 +- security/selinux/hooks.c | 2 +- 6 files changed, 37 insertions(+), 47 deletions(-) (limited to 'include/linux') diff --git a/fs/exec.c b/fs/exec.c index 22cc38d9e79..cfd5e3047bd 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1026,10 +1026,10 @@ static void flush_old_files(struct files_struct * files) fdt = files_fdtable(files); if (i >= fdt->max_fds) break; - set = fdt->close_on_exec->fds_bits[j]; + set = fdt->close_on_exec[j]; if (!set) continue; - fdt->close_on_exec->fds_bits[j] = 0; + fdt->close_on_exec[j] = 0; spin_unlock(&files->file_lock); for ( ; set ; i++,set >>= 1) { if (set & 1) { diff --git a/fs/file.c b/fs/file.c index 114fea0a2ce..2d479dd8484 100644 --- a/fs/file.c +++ b/fs/file.c @@ -40,7 +40,7 @@ int sysctl_nr_open_max = 1024 * 1024; /* raised later */ */ static DEFINE_PER_CPU(struct fdtable_defer, fdtable_defer_list); -static void *alloc_fdmem(unsigned int size) +static void *alloc_fdmem(size_t size) { /* * Very large allocations can stress page reclaim, so fall back to @@ -142,7 +142,7 @@ static void copy_fdtable(struct fdtable *nfdt, struct fdtable *ofdt) static struct fdtable * alloc_fdtable(unsigned int nr) { struct fdtable *fdt; - char *data; + void *data; /* * Figure out how many fds we actually want to support in this fdtable. @@ -172,14 +172,15 @@ static struct fdtable * alloc_fdtable(unsigned int nr) data = alloc_fdmem(nr * sizeof(struct file *)); if (!data) goto out_fdt; - fdt->fd = (struct file **)data; - data = alloc_fdmem(max_t(unsigned int, + fdt->fd = data; + + data = alloc_fdmem(max_t(size_t, 2 * nr / BITS_PER_BYTE, L1_CACHE_BYTES)); if (!data) goto out_arr; - fdt->open_fds = (fd_set *)data; - data += nr / BITS_PER_BYTE; - fdt->close_on_exec = (fd_set *)data; + fdt->open_fds = data; + data += nr / BITS_PER_LONG; + fdt->close_on_exec = data; fdt->next = NULL; return fdt; @@ -275,11 +276,11 @@ static int count_open_files(struct fdtable *fdt) int i; /* Find the last open fd */ - for (i = size/(8*sizeof(long)); i > 0; ) { - if (fdt->open_fds->fds_bits[--i]) + for (i = size / BITS_PER_LONG; i > 0; ) { + if (fdt->open_fds[--i]) break; } - i = (i+1) * 8 * sizeof(long); + i = (i + 1) * BITS_PER_LONG; return i; } @@ -306,8 +307,8 @@ struct files_struct *dup_fd(struct files_struct *oldf, int *errorp) newf->next_fd = 0; new_fdt = &newf->fdtab; new_fdt->max_fds = NR_OPEN_DEFAULT; - new_fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init; - new_fdt->open_fds = (fd_set *)&newf->open_fds_init; + new_fdt->close_on_exec = newf->close_on_exec_init; + new_fdt->open_fds = newf->open_fds_init; new_fdt->fd = &newf->fd_array[0]; new_fdt->next = NULL; @@ -350,10 +351,8 @@ struct files_struct *dup_fd(struct files_struct *oldf, int *errorp) old_fds = old_fdt->fd; new_fds = new_fdt->fd; - memcpy(new_fdt->open_fds->fds_bits, - old_fdt->open_fds->fds_bits, open_files/8); - memcpy(new_fdt->close_on_exec->fds_bits, - old_fdt->close_on_exec->fds_bits, open_files/8); + memcpy(new_fdt->open_fds, old_fdt->open_fds, open_files / 8); + memcpy(new_fdt->close_on_exec, old_fdt->close_on_exec, open_files / 8); for (i = open_files; i != 0; i--) { struct file *f = *old_fds++; @@ -379,11 +378,11 @@ struct files_struct *dup_fd(struct files_struct *oldf, int *errorp) memset(new_fds, 0, size); if (new_fdt->max_fds > open_files) { - int left = (new_fdt->max_fds-open_files)/8; - int start = open_files / (8 * sizeof(unsigned long)); + int left = (new_fdt->max_fds - open_files) / 8; + int start = open_files / BITS_PER_LONG; - memset(&new_fdt->open_fds->fds_bits[start], 0, left); - memset(&new_fdt->close_on_exec->fds_bits[start], 0, left); + memset(&new_fdt->open_fds[start], 0, left); + memset(&new_fdt->close_on_exec[start], 0, left); } rcu_assign_pointer(newf->fdt, new_fdt); @@ -419,8 +418,8 @@ struct files_struct init_files = { .fdtab = { .max_fds = NR_OPEN_DEFAULT, .fd = &init_files.fd_array[0], - .close_on_exec = (fd_set *)&init_files.close_on_exec_init, - .open_fds = (fd_set *)&init_files.open_fds_init, + .close_on_exec = init_files.close_on_exec_init, + .open_fds = init_files.open_fds_init, }, .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock), }; @@ -443,8 +442,7 @@ repeat: fd = files->next_fd; if (fd < fdt->max_fds) - fd = find_next_zero_bit(fdt->open_fds->fds_bits, - fdt->max_fds, fd); + fd = find_next_zero_bit(fdt->open_fds, fdt->max_fds, fd); error = expand_files(files, fd); if (error < 0) diff --git a/fs/select.c b/fs/select.c index d33418fdc85..2e7fbe8a092 100644 --- a/fs/select.c +++ b/fs/select.c @@ -348,7 +348,7 @@ static int max_select_fd(unsigned long n, fd_set_bits *fds) set = ~(~0UL << (n & (__NFDBITS-1))); n /= __NFDBITS; fdt = files_fdtable(current->files); - open_fds = fdt->open_fds->fds_bits+n; + open_fds = fdt->open_fds + n; max = 0; if (set) { set &= BITS(fds, n); diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 7675da2c18f..158a41eed31 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -21,51 +21,43 @@ */ #define NR_OPEN_DEFAULT BITS_PER_LONG -/* - * The embedded_fd_set is a small fd_set, - * suitable for most tasks (which open <= BITS_PER_LONG files) - */ -struct embedded_fd_set { - unsigned long fds_bits[1]; -}; - struct fdtable { unsigned int max_fds; struct file __rcu **fd; /* current fd array */ - fd_set *close_on_exec; - fd_set *open_fds; + unsigned long *close_on_exec; + unsigned long *open_fds; struct rcu_head rcu; struct fdtable *next; }; static inline void __set_close_on_exec(int fd, struct fdtable *fdt) { - FD_SET(fd, fdt->close_on_exec); + __set_bit(fd, fdt->close_on_exec); } static inline void __clear_close_on_exec(int fd, struct fdtable *fdt) { - FD_CLR(fd, fdt->close_on_exec); + __clear_bit(fd, fdt->close_on_exec); } static inline bool close_on_exec(int fd, const struct fdtable *fdt) { - return FD_ISSET(fd, fdt->close_on_exec); + return test_bit(fd, fdt->close_on_exec); } static inline void __set_open_fd(int fd, struct fdtable *fdt) { - FD_SET(fd, fdt->open_fds); + __set_bit(fd, fdt->open_fds); } static inline void __clear_open_fd(int fd, struct fdtable *fdt) { - FD_CLR(fd, fdt->open_fds); + __clear_bit(fd, fdt->open_fds); } static inline bool fd_is_open(int fd, const struct fdtable *fdt) { - return FD_ISSET(fd, fdt->open_fds); + return test_bit(fd, fdt->open_fds); } /* @@ -83,8 +75,8 @@ struct files_struct { */ spinlock_t file_lock ____cacheline_aligned_in_smp; int next_fd; - struct embedded_fd_set close_on_exec_init; - struct embedded_fd_set open_fds_init; + unsigned long close_on_exec_init[1]; + unsigned long open_fds_init[1]; struct file __rcu * fd_array[NR_OPEN_DEFAULT]; }; diff --git a/kernel/exit.c b/kernel/exit.c index 4b4042f9bc6..4db020015f1 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -473,7 +473,7 @@ static void close_files(struct files_struct * files) i = j * __NFDBITS; if (i >= fdt->max_fds) break; - set = fdt->open_fds->fds_bits[j++]; + set = fdt->open_fds[j++]; while (set) { if (set & 1) { struct file * file = xchg(&fdt->fd[i], NULL); diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 6a3683e2842..421c990a20b 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2145,7 +2145,7 @@ static inline void flush_unauthorized_files(const struct cred *cred, fdt = files_fdtable(files); if (i >= fdt->max_fds) break; - set = fdt->open_fds->fds_bits[j]; + set = fdt->open_fds[j]; if (!set) continue; spin_unlock(&files->file_lock); -- cgit v1.2.3-70-g09d2 From cf420048b3b2af9ce928d35cc5455c646c9dd2f7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 16 Feb 2012 17:50:06 +0000 Subject: Delete the __FD_*() funcs for operating on fd_set from linux/time.h Delete the __FD_*() functions for operating on fd_set structs from linux/time.h as they're no longer used within the kernel with the preceding patch and are not exported to userspace. Whilst linux/time.h *does* export the FD_*() equivalents as wrappers around __FD_*(), userspace provides its own definition of __FD_*(). Note that the definition of FD_ZERO() in linux/time.h may not be used with the fd_sets associated with struct fdtable as the fd_set may have been allocated in a truncated fashion. Signed-off-by: David Howells Link: http://lkml.kernel.org/r/20120216175006.23314.18984.stgit@warthog.procyon.org.uk Signed-off-by: H. Peter Anvin Cc: Al Viro --- include/linux/time.h | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index 93277a0b229..9f43487facd 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -4,11 +4,8 @@ #include #ifdef __KERNEL__ -# include # include -# include # include -# include # include #endif @@ -260,26 +257,6 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) a->tv_nsec = ns; } -static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - __set_bit(__fd, __fdsetp->fds_bits); -} - -static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - __clear_bit(__fd, __fdsetp->fds_bits); -} - -static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__fdsetp) -{ - return test_bit(__fd, __fdsetp->fds_bits); -} - -static inline void __FD_ZERO(__kernel_fd_set *__fdsetp) -{ - memset(__fdsetp->fds_bits, 0, sizeof __fdsetp->fds_bits); -} - #endif /* __KERNEL__ */ #define NFDBITS __NFDBITS -- cgit v1.2.3-70-g09d2 From d8e5ddef21df05bc2a14d8c0e287cbf083da60a3 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 6 Feb 2012 16:36:48 -0800 Subject: sysinfo: Move struct sysinfo to a separate header file struct sysinfo is just about the only thing exported to userspace from , so move it into a separate header file with a residual #include in . Originally-by: H. J. Lu Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org --- include/linux/Kbuild | 1 + include/linux/kernel.h | 21 ++------------------- include/linux/sysinfo.h | 22 ++++++++++++++++++++++ 3 files changed, 25 insertions(+), 19 deletions(-) create mode 100644 include/linux/sysinfo.h (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index c94e71781b7..84460867766 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -355,6 +355,7 @@ header-y += suspend_ioctls.h header-y += swab.h header-y += synclink.h header-y += sysctl.h +header-y += sysinfo.h header-y += taskstats.h header-y += tcp.h header-y += telephony.h diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e8343422240..dc6a50f88ca 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -1,6 +1,8 @@ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H +#include + /* * 'kernel.h' contains some often-used function prototypes etc */ @@ -745,27 +747,8 @@ extern int __build_bug_on_failed; # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD #endif -struct sysinfo; extern int do_sysinfo(struct sysinfo *info); #endif /* __KERNEL__ */ -#define SI_LOAD_SHIFT 16 -struct sysinfo { - long uptime; /* Seconds since boot */ - unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ - unsigned long totalram; /* Total usable main memory size */ - unsigned long freeram; /* Available memory size */ - unsigned long sharedram; /* Amount of shared memory */ - unsigned long bufferram; /* Memory used by buffers */ - unsigned long totalswap; /* Total swap space size */ - unsigned long freeswap; /* swap space still available */ - unsigned short procs; /* Number of current processes */ - unsigned short pad; /* explicit padding for m68k */ - unsigned long totalhigh; /* Total high memory size */ - unsigned long freehigh; /* Available high memory size */ - unsigned int mem_unit; /* Memory unit size in bytes */ - char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ -}; - #endif diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h new file mode 100644 index 00000000000..ec4fc228ac0 --- /dev/null +++ b/include/linux/sysinfo.h @@ -0,0 +1,22 @@ +#ifndef _LINUX_SYSINFO_H +#define _LINUX_SYSINFO_H + +#define SI_LOAD_SHIFT 16 +struct sysinfo { + long uptime; /* Seconds since boot */ + unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ + unsigned long totalram; /* Total usable main memory size */ + unsigned long freeram; /* Available memory size */ + unsigned long sharedram; /* Amount of shared memory */ + unsigned long bufferram; /* Memory used by buffers */ + unsigned long totalswap; /* Total swap space size */ + unsigned long freeswap; /* swap space still available */ + unsigned short procs; /* Number of current processes */ + unsigned short pad; /* explicit padding for m68k */ + unsigned long totalhigh; /* Total high memory size */ + unsigned long freehigh; /* Available high memory size */ + unsigned int mem_unit; /* Memory unit size in bytes */ + char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ +}; + +#endif /* _LINUX_SYSINFO_H */ -- cgit v1.2.3-70-g09d2 From 109a1f32d0d3e23545f0286f2d6e0a80298f629d Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 10 Feb 2012 13:58:56 -0800 Subject: sysinfo: Use explicit types in Change to use explicitly sized types. Replace long/unsigned long with __kernel_[u]long_t so that a non-legacy 32-bit ABI running on a 64-bit kernel can export those as 64-bit types. Originally-by: H. J. Lu Signed-off-by: H. Peter Anvin --- include/linux/sysinfo.h | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h index ec4fc228ac0..934335a2252 100644 --- a/include/linux/sysinfo.h +++ b/include/linux/sysinfo.h @@ -1,22 +1,24 @@ #ifndef _LINUX_SYSINFO_H #define _LINUX_SYSINFO_H +#include + #define SI_LOAD_SHIFT 16 struct sysinfo { - long uptime; /* Seconds since boot */ - unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ - unsigned long totalram; /* Total usable main memory size */ - unsigned long freeram; /* Available memory size */ - unsigned long sharedram; /* Amount of shared memory */ - unsigned long bufferram; /* Memory used by buffers */ - unsigned long totalswap; /* Total swap space size */ - unsigned long freeswap; /* swap space still available */ - unsigned short procs; /* Number of current processes */ - unsigned short pad; /* explicit padding for m68k */ - unsigned long totalhigh; /* Total high memory size */ - unsigned long freehigh; /* Available high memory size */ - unsigned int mem_unit; /* Memory unit size in bytes */ - char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ + __kernel_long_t uptime; /* Seconds since boot */ + __kernel_ulong_t loads[3]; /* 1, 5, and 15 minute load averages */ + __kernel_ulong_t totalram; /* Total usable main memory size */ + __kernel_ulong_t freeram; /* Available memory size */ + __kernel_ulong_t sharedram; /* Amount of shared memory */ + __kernel_ulong_t bufferram; /* Memory used by buffers */ + __kernel_ulong_t totalswap; /* Total swap space size */ + __kernel_ulong_t freeswap; /* swap space still available */ + __u16 procs; /* Number of current processes */ + __u16 pad; /* Explicit padding for m68k */ + __kernel_ulong_t totalhigh; /* Total high memory size */ + __kernel_ulong_t freehigh; /* Available high memory size */ + __u32 mem_unit; /* Memory unit size in bytes */ + char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)]; /* Padding: libc5 uses this.. */ }; #endif /* _LINUX_SYSINFO_H */ -- cgit v1.2.3-70-g09d2 From 45e877812926c69d643d6274347f79513a4ee934 Mon Sep 17 00:00:00 2001 From: "H. J. Lu" Date: Fri, 10 Feb 2012 14:04:27 -0800 Subject: compat: Introduce COMPAT_USE_64BIT_TIME Allow a compatibility ABI to use a 64-bit time_t and 64-bit members in struct timeval and struct timespec to avoid the Y2038 problem. This will be used for the x32 ABI. Signed-off-by: H. Peter Anvin --- include/linux/compat.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index 41c9f6515f4..1be91c04824 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -19,6 +19,10 @@ #include #include +#ifndef COMPAT_USE_64BIT_TIME +#define COMPAT_USE_64BIT_TIME 0 +#endif + #define compat_jiffies_to_clock_t(x) \ (((unsigned long)(x) * COMPAT_USER_HZ) / HZ) -- cgit v1.2.3-70-g09d2 From 6684ba202b5ab2f36d574c72fe50c207d99b3e35 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 19 Feb 2012 17:38:00 -0800 Subject: compat: Add helper functions to read/write struct timeval, timespec Add helper functions to read and write struct timeval and struct timespec from userspace. We already had helper functions for reading and writing struct compat_timespec; add a set of functions to do the same with struct timeval, and add a second suite of functions which can be sensitive to COMPAT_USE_64BIT_TIME and access either 32- or 64-bit time structures. This also exports these helper functions to modules. Rename the existing inlines for converting between struct compat_timeval and native struct timespec so we can have a saner naming convention for the exported functions. Suggested-by: Linus Torvalds Signed-off-by: H. Peter Anvin --- include/linux/compat.h | 16 ++++++++++++ kernel/compat.c | 68 ++++++++++++++++++++++++++++++++++++++++++++------ 2 files changed, 76 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index 1be91c04824..a82e452bbdb 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -87,10 +87,26 @@ typedef struct { compat_sigset_word sig[_COMPAT_NSIG_WORDS]; } compat_sigset_t; +/* + * These functions operate strictly on struct compat_time* + */ extern int get_compat_timespec(struct timespec *, const struct compat_timespec __user *); extern int put_compat_timespec(const struct timespec *, struct compat_timespec __user *); +extern int get_compat_timeval(struct timeval *, + const struct compat_timeval __user *); +extern int put_compat_timeval(const struct timeval *, + struct compat_timeval __user *); +/* + * These functions operate on 32- or 64-bit specs depending on + * COMPAT_USE_64BIT_TIME, hence the void user pointer arguments and the + * naming as compat_get/put_ rather than get/put_compat_. + */ +extern int compat_get_timespec(struct timespec *, const void __user *); +extern int compat_put_timespec(const struct timespec *, void __user *); +extern int compat_get_timeval(struct timeval *, const void __user *); +extern int compat_put_timeval(const struct timeval *, void __user *); struct compat_iovec { compat_uptr_t iov_base; diff --git a/kernel/compat.c b/kernel/compat.c index f346cedfe24..74ff8498809 100644 --- a/kernel/compat.c +++ b/kernel/compat.c @@ -31,11 +31,10 @@ #include /* - * Note that the native side is already converted to a timespec, because - * that's what we want anyway. + * Get/set struct timeval with struct timespec on the native side */ -static int compat_get_timeval(struct timespec *o, - struct compat_timeval __user *i) +static int compat_get_timeval_convert(struct timespec *o, + struct compat_timeval __user *i) { long usec; @@ -46,8 +45,8 @@ static int compat_get_timeval(struct timespec *o, return 0; } -static int compat_put_timeval(struct compat_timeval __user *o, - struct timeval *i) +static int compat_put_timeval_convert(struct compat_timeval __user *o, + struct timeval *i) { return (put_user(i->tv_sec, &o->tv_sec) || put_user(i->tv_usec, &o->tv_usec)) ? -EFAULT : 0; @@ -117,7 +116,7 @@ asmlinkage long compat_sys_gettimeofday(struct compat_timeval __user *tv, if (tv) { struct timeval ktv; do_gettimeofday(&ktv); - if (compat_put_timeval(tv, &ktv)) + if (compat_put_timeval_convert(tv, &ktv)) return -EFAULT; } if (tz) { @@ -135,7 +134,7 @@ asmlinkage long compat_sys_settimeofday(struct compat_timeval __user *tv, struct timezone ktz; if (tv) { - if (compat_get_timeval(&kts, tv)) + if (compat_get_timeval_convert(&kts, tv)) return -EFAULT; } if (tz) { @@ -146,12 +145,29 @@ asmlinkage long compat_sys_settimeofday(struct compat_timeval __user *tv, return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL); } +int get_compat_timeval(struct timeval *tv, const struct compat_timeval __user *ctv) +{ + return (!access_ok(VERIFY_READ, ctv, sizeof(*ctv)) || + __get_user(tv->tv_sec, &ctv->tv_sec) || + __get_user(tv->tv_usec, &ctv->tv_usec)) ? -EFAULT : 0; +} +EXPORT_SYMBOL_GPL(get_compat_timeval); + +int put_compat_timeval(const struct timeval *tv, struct compat_timeval __user *ctv) +{ + return (!access_ok(VERIFY_WRITE, ctv, sizeof(*ctv)) || + __put_user(tv->tv_sec, &ctv->tv_sec) || + __put_user(tv->tv_usec, &ctv->tv_usec)) ? -EFAULT : 0; +} +EXPORT_SYMBOL_GPL(put_compat_timeval); + int get_compat_timespec(struct timespec *ts, const struct compat_timespec __user *cts) { return (!access_ok(VERIFY_READ, cts, sizeof(*cts)) || __get_user(ts->tv_sec, &cts->tv_sec) || __get_user(ts->tv_nsec, &cts->tv_nsec)) ? -EFAULT : 0; } +EXPORT_SYMBOL_GPL(get_compat_timespec); int put_compat_timespec(const struct timespec *ts, struct compat_timespec __user *cts) { @@ -161,6 +177,42 @@ int put_compat_timespec(const struct timespec *ts, struct compat_timespec __user } EXPORT_SYMBOL_GPL(put_compat_timespec); +int compat_get_timeval(struct timeval *tv, const void __user *utv) +{ + if (COMPAT_USE_64BIT_TIME) + return copy_from_user(tv, utv, sizeof *tv) ? -EFAULT : 0; + else + return get_compat_timeval(tv, utv); +} +EXPORT_SYMBOL_GPL(compat_get_timeval); + +int compat_put_timeval(const struct timeval *tv, void __user *utv) +{ + if (COMPAT_USE_64BIT_TIME) + return copy_to_user(utv, tv, sizeof *tv) ? -EFAULT : 0; + else + return put_compat_timeval(tv, utv); +} +EXPORT_SYMBOL_GPL(compat_put_timeval); + +int compat_get_timespec(struct timespec *ts, const void __user *uts) +{ + if (COMPAT_USE_64BIT_TIME) + return copy_from_user(ts, uts, sizeof *ts) ? -EFAULT : 0; + else + return get_compat_timespec(ts, uts); +} +EXPORT_SYMBOL_GPL(compat_get_timespec); + +int compat_put_timespec(const struct timespec *ts, void __user *uts) +{ + if (COMPAT_USE_64BIT_TIME) + return copy_to_user(uts, ts, sizeof *ts) ? -EFAULT : 0; + else + return put_compat_timespec(ts, uts); +} +EXPORT_SYMBOL_GPL(compat_put_timespec); + static long compat_nanosleep_restart(struct restart_block *restart) { struct compat_timespec __user *rmtp; -- cgit v1.2.3-70-g09d2 From ff88943a1471440cc6be7a11a942a5a8232bee61 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 14 Feb 2012 12:58:56 -0800 Subject: aio: Use __kernel_ulong_t to define aio_context_t Rather than using "unsigned long" which is ABI-dependent, use __kernel_ulong_t to define the externally visible type aio_context_t. Note: the change in this form will cause unsigned long/unsigned int differences on existing ABIs. If that is unacceptable we may have to define a new type. Signed-off-by: H. Peter Anvin Cc: Benjamin LaHaise --- include/linux/aio_abi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h index 2c873166418..86fa7a71336 100644 --- a/include/linux/aio_abi.h +++ b/include/linux/aio_abi.h @@ -30,7 +30,7 @@ #include #include -typedef unsigned long aio_context_t; +typedef __kernel_ulong_t aio_context_t; enum { IOCB_CMD_PREAD = 0, -- cgit v1.2.3-70-g09d2 From 0c2022eccb01630c037f2024531e9ff1afbe1564 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Mon, 20 Feb 2012 17:53:02 -0500 Subject: jbd2: allocate transaction from separate slab cache There is normally only a handful of these active at any one time, but putting them in a separate slab cache makes debugging memory corruption problems easier. Manish Katiyar also wanted this make it easier to test memory failure scenarios in the jbd2 layer. Cc: Manish Katiyar Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" --- fs/jbd2/checkpoint.c | 2 +- fs/jbd2/commit.c | 2 +- fs/jbd2/journal.c | 3 +++ fs/jbd2/transaction.c | 36 +++++++++++++++++++++++++++++++++--- include/linux/jbd2.h | 5 +++++ 5 files changed, 43 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 453c9068b7d..253e91890e7 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -722,7 +722,7 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh) transaction->t_tid, stats); __jbd2_journal_drop_transaction(journal, transaction); - kfree(transaction); + jbd2_journal_free_transaction(transaction); /* Just in case anybody was waiting for more transactions to be checkpointed... */ diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 5069b847515..8adc5d460f5 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -1048,7 +1048,7 @@ restart_loop: jbd_debug(1, "JBD2: commit %d complete, head %d\n", journal->j_commit_sequence, journal->j_tail_sequence); if (to_free) - kfree(commit_transaction); + jbd2_journal_free_transaction(commit_transaction); wake_up(&journal->j_wait_done_commit); } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 93a595c6961..aa8f5986f8d 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -2361,6 +2361,8 @@ static int __init journal_init_caches(void) ret = journal_init_jbd2_journal_head_cache(); if (ret == 0) ret = journal_init_handle_cache(); + if (ret == 0) + ret = jbd2_journal_init_transaction_cache(); return ret; } @@ -2369,6 +2371,7 @@ static void jbd2_journal_destroy_caches(void) jbd2_journal_destroy_revoke_caches(); jbd2_journal_destroy_jbd2_journal_head_cache(); jbd2_journal_destroy_handle_cache(); + jbd2_journal_destroy_transaction_cache(); jbd2_journal_destroy_slabs(); } diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 52653306254..d0a8b017b28 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -33,6 +33,35 @@ static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh); static void __jbd2_journal_unfile_buffer(struct journal_head *jh); +static struct kmem_cache *transaction_cache; +int __init jbd2_journal_init_transaction_cache(void) +{ + J_ASSERT(!transaction_cache); + transaction_cache = kmem_cache_create("jbd2_transaction_s", + sizeof(transaction_t), + 0, + SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY, + NULL); + if (transaction_cache) + return 0; + return -ENOMEM; +} + +void jbd2_journal_destroy_transaction_cache(void) +{ + if (transaction_cache) { + kmem_cache_destroy(transaction_cache); + transaction_cache = NULL; + } +} + +void jbd2_journal_free_transaction(transaction_t *transaction) +{ + if (unlikely(ZERO_OR_NULL_PTR(transaction))) + return; + kmem_cache_free(transaction_cache, transaction); +} + /* * jbd2_get_transaction: obtain a new transaction_t object. * @@ -133,7 +162,8 @@ static int start_this_handle(journal_t *journal, handle_t *handle, alloc_transaction: if (!journal->j_running_transaction) { - new_transaction = kzalloc(sizeof(*new_transaction), gfp_mask); + new_transaction = kmem_cache_alloc(transaction_cache, + gfp_mask | __GFP_ZERO); if (!new_transaction) { /* * If __GFP_FS is not present, then we may be @@ -162,7 +192,7 @@ repeat: if (is_journal_aborted(journal) || (journal->j_errno != 0 && !(journal->j_flags & JBD2_ACK_ERR))) { read_unlock(&journal->j_state_lock); - kfree(new_transaction); + jbd2_journal_free_transaction(new_transaction); return -EROFS; } @@ -284,7 +314,7 @@ repeat: read_unlock(&journal->j_state_lock); lock_map_acquire(&handle->h_lockdep_map); - kfree(new_transaction); + jbd2_journal_free_transaction(new_transaction); return 0; } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 5557baefed6..46eef77e6ab 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1020,6 +1020,11 @@ jbd2_journal_write_metadata_buffer(transaction_t *transaction, /* Transaction locking */ extern void __wait_on_journal (journal_t *); +/* Transaction cache support */ +extern void jbd2_journal_destroy_transaction_cache(void); +extern int jbd2_journal_init_transaction_cache(void); +extern void jbd2_journal_free_transaction(transaction_t *); + /* * Journal locking. * -- cgit v1.2.3-70-g09d2 From dcc043dc0c60046cf6b75ca04a462314cf64e2ba Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 1 Feb 2012 16:12:18 +0530 Subject: dmaengine: Add flow controller information to dma_slave_config Flow controller is programmable for few controllers and there are few intelligent peripherals like, Synopsys JPEG controller, that needs to be a flow controller of DMA transfers on dest side. For this, currently two drivers, pl08x and dw_dmac, support flow controller to be passed from platform to these drivers. Perhaps, this should be a part of struct dma_slave_config. This patch adds another field device_fc to this structure. User drivers must pass this as true if they want to be flow controller of certain transfers. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b6..7e640bf27d2 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -25,6 +25,7 @@ #include #include #include +#include #include /** @@ -331,6 +332,9 @@ enum dma_slave_buswidth { * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. + * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill + * with 'true' if peripheral should be flow controller. Direction will be + * selected at Runtime. * * This struct is passed in as configuration data to a DMA engine * in order to set up a certain channel for DMA transport at runtime. @@ -357,6 +361,7 @@ struct dma_slave_config { enum dma_slave_buswidth dst_addr_width; u32 src_maxburst; u32 dst_maxburst; + bool device_fc; }; static inline const char *dma_chan_name(struct dma_chan *chan) -- cgit v1.2.3-70-g09d2 From 8c9f7aa316f547f70d270a08d1212f958721c071 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 1 Feb 2012 16:12:20 +0530 Subject: dmaengine/amba-pl08x: Take flow controller info from DMA_SLAVE_CONFIG Flow controller information is passed now from DMA_SLAVE_CONFIG option. This patch makes changes in pl08x driver to use device_fc from it instead of platform data. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 4 +++- include/linux/amba/pl08x.h | 8 ++++---- 2 files changed, 7 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 840c6c0dc53..513184b4fdd 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1139,6 +1139,8 @@ static int dma_set_runtime_config(struct dma_chan *chan, cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; + plchan->device_fc = config->device_fc; + if (plchan->runtime_direction == DMA_DEV_TO_MEM) { plchan->src_addr = config->src_addr; plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | @@ -1370,7 +1372,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } - if (plchan->cd->device_fc) + if (plchan->device_fc) tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : PL080_FLOW_PER2MEM_PER; else diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 033f6aa670d..2c58853ca42 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,9 +47,6 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -68,7 +65,6 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; @@ -183,6 +179,9 @@ enum pl08x_dma_chan_state { * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @waiting: a TX descriptor on this channel which is waiting for a physical * channel to become available */ @@ -205,6 +204,7 @@ struct pl08x_dma_chan { struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; + bool device_fc; struct pl08x_txd *waiting; }; -- cgit v1.2.3-70-g09d2 From a1c46016794fdd83b7993303915ec7f4a06682b7 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 1 Feb 2012 16:12:28 +0530 Subject: dmaengine/dw_dmac: Remove unused fields in struct dw_dma_slave Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac_regs.h | 12 ++++++++++++ include/linux/dw_dmac.h | 38 -------------------------------------- 2 files changed, 12 insertions(+), 38 deletions(-) (limited to 'include/linux') diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 2005d301803..eec0481a12f 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -13,6 +13,18 @@ #define DW_DMA_MAX_NR_CHANNELS 8 +/* flow controller */ +enum dw_dma_fc { + DW_DMA_FC_D_M2M, + DW_DMA_FC_D_M2P, + DW_DMA_FC_D_P2M, + DW_DMA_FC_D_P2P, + DW_DMA_FC_P_P2M, + DW_DMA_FC_SP_P2P, + DW_DMA_FC_P_M2P, + DW_DMA_FC_DP_P2P, +}; + /* * Redefine this macro to handle differences between 32- and 64-bit * addressing, big vs. little endian, etc. diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h index f2c64f92c4a..2412e02d7c0 100644 --- a/include/linux/dw_dmac.h +++ b/include/linux/dw_dmac.h @@ -31,18 +31,6 @@ struct dw_dma_platform_data { unsigned char chan_priority; }; -/** - * enum dw_dma_slave_width - DMA slave register access width. - * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses - * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses - * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses - */ -enum dw_dma_slave_width { - DW_DMA_SLAVE_WIDTH_8BIT, - DW_DMA_SLAVE_WIDTH_16BIT, - DW_DMA_SLAVE_WIDTH_32BIT, -}; - /* bursts size */ enum dw_dma_msize { DW_DMA_MSIZE_1, @@ -55,47 +43,21 @@ enum dw_dma_msize { DW_DMA_MSIZE_256, }; -/* flow controller */ -enum dw_dma_fc { - DW_DMA_FC_D_M2M, - DW_DMA_FC_D_M2P, - DW_DMA_FC_D_P2M, - DW_DMA_FC_D_P2P, - DW_DMA_FC_P_P2M, - DW_DMA_FC_SP_P2P, - DW_DMA_FC_P_M2P, - DW_DMA_FC_DP_P2P, -}; - /** * struct dw_dma_slave - Controller-specific information about a slave * * @dma_dev: required DMA master device - * @tx_reg: physical address of data register used for - * memory-to-peripheral transfers - * @rx_reg: physical address of data register used for - * peripheral-to-memory transfers - * @reg_width: peripheral register width * @cfg_hi: Platform-specific initializer for the CFG_HI register * @cfg_lo: Platform-specific initializer for the CFG_LO register * @src_master: src master for transfers on allocated channel. * @dst_master: dest master for transfers on allocated channel. - * @src_msize: src burst size. - * @dst_msize: dest burst size. - * @fc: flow controller for DMA transfer */ struct dw_dma_slave { struct device *dma_dev; - dma_addr_t tx_reg; - dma_addr_t rx_reg; - enum dw_dma_slave_width reg_width; u32 cfg_hi; u32 cfg_lo; u8 src_master; u8 dst_master; - u8 src_msize; - u8 dst_msize; - u8 fc; }; /* Platform-configurable bits in CFG_HI */ -- cgit v1.2.3-70-g09d2 From 499e547057f5bba5cd6f87ebe59b05d0c59da905 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 22 Feb 2012 15:50:28 -0500 Subject: tracing/ring-buffer: Only have tracing_on disable tracing buffers As the ring-buffer code is being used by other facilities in the kernel, having tracing_on file disable *all* buffers is not a desired affect. It should only disable the ftrace buffers that are being used. Move the code into the trace.c file and use the buffer disabling for tracing_on() and tracing_off(). This way only the ftrace buffers will be affected by them and other kernel utilities will not be confused to why their output suddenly stopped. Signed-off-by: Steven Rostedt --- include/linux/ring_buffer.h | 3 + kernel/trace/ring_buffer.c | 157 +++++++++++++++++--------------------------- kernel/trace/trace.c | 107 ++++++++++++++++++++++++++++++ kernel/trace/trace.h | 1 + 4 files changed, 171 insertions(+), 97 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 67be0376d8e..7be2e88f23f 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -151,6 +151,9 @@ int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_disable(struct ring_buffer *buffer); void ring_buffer_record_enable(struct ring_buffer *buffer); +void ring_buffer_record_off(struct ring_buffer *buffer); +void ring_buffer_record_on(struct ring_buffer *buffer); +int ring_buffer_record_is_on(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index f5b7b5c1195..cf8d11e91ef 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -154,33 +154,10 @@ enum { static unsigned long ring_buffer_flags __read_mostly = RB_BUFFERS_ON; -#define BUF_PAGE_HDR_SIZE offsetof(struct buffer_data_page, data) - -/** - * tracing_on - enable all tracing buffers - * - * This function enables all tracing buffers that may have been - * disabled with tracing_off. - */ -void tracing_on(void) -{ - set_bit(RB_BUFFERS_ON_BIT, &ring_buffer_flags); -} -EXPORT_SYMBOL_GPL(tracing_on); +/* Used for individual buffers (after the counter) */ +#define RB_BUFFER_OFF (1 << 20) -/** - * tracing_off - turn off all tracing buffers - * - * This function stops all tracing buffers from recording data. - * It does not disable any overhead the tracers themselves may - * be causing. This function simply causes all recording to - * the ring buffers to fail. - */ -void tracing_off(void) -{ - clear_bit(RB_BUFFERS_ON_BIT, &ring_buffer_flags); -} -EXPORT_SYMBOL_GPL(tracing_off); +#define BUF_PAGE_HDR_SIZE offsetof(struct buffer_data_page, data) /** * tracing_off_permanent - permanently disable ring buffers @@ -193,15 +170,6 @@ void tracing_off_permanent(void) set_bit(RB_BUFFERS_DISABLED_BIT, &ring_buffer_flags); } -/** - * tracing_is_on - show state of ring buffers enabled - */ -int tracing_is_on(void) -{ - return ring_buffer_flags == RB_BUFFERS_ON; -} -EXPORT_SYMBOL_GPL(tracing_is_on); - #define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array)) #define RB_ALIGNMENT 4U #define RB_MAX_SMALL_DATA (RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX) @@ -2618,6 +2586,63 @@ void ring_buffer_record_enable(struct ring_buffer *buffer) } EXPORT_SYMBOL_GPL(ring_buffer_record_enable); +/** + * ring_buffer_record_off - stop all writes into the buffer + * @buffer: The ring buffer to stop writes to. + * + * This prevents all writes to the buffer. Any attempt to write + * to the buffer after this will fail and return NULL. + * + * This is different than ring_buffer_record_disable() as + * it works like an on/off switch, where as the disable() verison + * must be paired with a enable(). + */ +void ring_buffer_record_off(struct ring_buffer *buffer) +{ + unsigned int rd; + unsigned int new_rd; + + do { + rd = atomic_read(&buffer->record_disabled); + new_rd = rd | RB_BUFFER_OFF; + } while (atomic_cmpxchg(&buffer->record_disabled, rd, new_rd) != rd); +} +EXPORT_SYMBOL_GPL(ring_buffer_record_off); + +/** + * ring_buffer_record_on - restart writes into the buffer + * @buffer: The ring buffer to start writes to. + * + * This enables all writes to the buffer that was disabled by + * ring_buffer_record_off(). + * + * This is different than ring_buffer_record_enable() as + * it works like an on/off switch, where as the enable() verison + * must be paired with a disable(). + */ +void ring_buffer_record_on(struct ring_buffer *buffer) +{ + unsigned int rd; + unsigned int new_rd; + + do { + rd = atomic_read(&buffer->record_disabled); + new_rd = rd & ~RB_BUFFER_OFF; + } while (atomic_cmpxchg(&buffer->record_disabled, rd, new_rd) != rd); +} +EXPORT_SYMBOL_GPL(ring_buffer_record_on); + +/** + * ring_buffer_record_is_on - return true if the ring buffer can write + * @buffer: The ring buffer to see if write is enabled + * + * Returns true if the ring buffer is in a state that it accepts writes. + */ +int ring_buffer_record_is_on(struct ring_buffer *buffer) +{ + return !atomic_read(&buffer->record_disabled); +} + /** * ring_buffer_record_disable_cpu - stop all writes into the cpu_buffer * @buffer: The ring buffer to stop writes to. @@ -4039,68 +4064,6 @@ int ring_buffer_read_page(struct ring_buffer *buffer, } EXPORT_SYMBOL_GPL(ring_buffer_read_page); -#ifdef CONFIG_TRACING -static ssize_t -rb_simple_read(struct file *filp, char __user *ubuf, - size_t cnt, loff_t *ppos) -{ - unsigned long *p = filp->private_data; - char buf[64]; - int r; - - if (test_bit(RB_BUFFERS_DISABLED_BIT, p)) - r = sprintf(buf, "permanently disabled\n"); - else - r = sprintf(buf, "%d\n", test_bit(RB_BUFFERS_ON_BIT, p)); - - return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); -} - -static ssize_t -rb_simple_write(struct file *filp, const char __user *ubuf, - size_t cnt, loff_t *ppos) -{ - unsigned long *p = filp->private_data; - unsigned long val; - int ret; - - ret = kstrtoul_from_user(ubuf, cnt, 10, &val); - if (ret) - return ret; - - if (val) - set_bit(RB_BUFFERS_ON_BIT, p); - else - clear_bit(RB_BUFFERS_ON_BIT, p); - - (*ppos)++; - - return cnt; -} - -static const struct file_operations rb_simple_fops = { - .open = tracing_open_generic, - .read = rb_simple_read, - .write = rb_simple_write, - .llseek = default_llseek, -}; - - -static __init int rb_init_debugfs(void) -{ - struct dentry *d_tracer; - - d_tracer = tracing_init_dentry(); - - trace_create_file("tracing_on", 0644, d_tracer, - &ring_buffer_flags, &rb_simple_fops); - - return 0; -} - -fs_initcall(rb_init_debugfs); -#endif - #ifdef CONFIG_HOTPLUG_CPU static int rb_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 10d5503f0d0..f3c13d63d06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -351,6 +351,59 @@ static void wakeup_work_handler(struct work_struct *work) static DECLARE_DELAYED_WORK(wakeup_work, wakeup_work_handler); +/** + * tracing_on - enable tracing buffers + * + * This function enables tracing buffers that may have been + * disabled with tracing_off. + */ +void tracing_on(void) +{ + if (global_trace.buffer) + ring_buffer_record_on(global_trace.buffer); + /* + * This flag is only looked at when buffers haven't been + * allocated yet. We don't really care about the race + * between setting this flag and actually turning + * on the buffer. + */ + global_trace.buffer_disabled = 0; +} +EXPORT_SYMBOL_GPL(tracing_on); + +/** + * tracing_off - turn off tracing buffers + * + * This function stops the tracing buffers from recording data. + * It does not disable any overhead the tracers themselves may + * be causing. This function simply causes all recording to + * the ring buffers to fail. + */ +void tracing_off(void) +{ + if (global_trace.buffer) + ring_buffer_record_on(global_trace.buffer); + /* + * This flag is only looked at when buffers haven't been + * allocated yet. We don't really care about the race + * between setting this flag and actually turning + * on the buffer. + */ + global_trace.buffer_disabled = 1; +} +EXPORT_SYMBOL_GPL(tracing_off); + +/** + * tracing_is_on - show state of ring buffers enabled + */ +int tracing_is_on(void) +{ + if (global_trace.buffer) + return ring_buffer_record_is_on(global_trace.buffer); + return !global_trace.buffer_disabled; +} +EXPORT_SYMBOL_GPL(tracing_is_on); + /** * trace_wake_up - wake up tasks waiting for trace input * @@ -4567,6 +4620,55 @@ static __init void create_trace_options_dir(void) create_trace_option_core_file(trace_options[i], i); } +static ssize_t +rb_simple_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct ring_buffer *buffer = filp->private_data; + char buf[64]; + int r; + + if (buffer) + r = ring_buffer_record_is_on(buffer); + else + r = 0; + + r = sprintf(buf, "%d\n", r); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +rb_simple_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct ring_buffer *buffer = filp->private_data; + unsigned long val; + int ret; + + ret = kstrtoul_from_user(ubuf, cnt, 10, &val); + if (ret) + return ret; + + if (buffer) { + if (val) + ring_buffer_record_on(buffer); + else + ring_buffer_record_off(buffer); + } + + (*ppos)++; + + return cnt; +} + +static const struct file_operations rb_simple_fops = { + .open = tracing_open_generic, + .read = rb_simple_read, + .write = rb_simple_write, + .llseek = default_llseek, +}; + static __init int tracer_init_debugfs(void) { struct dentry *d_tracer; @@ -4626,6 +4728,9 @@ static __init int tracer_init_debugfs(void) trace_create_file("trace_clock", 0644, d_tracer, NULL, &trace_clock_fops); + trace_create_file("tracing_on", 0644, d_tracer, + global_trace.buffer, &rb_simple_fops); + #ifdef CONFIG_DYNAMIC_FTRACE trace_create_file("dyn_ftrace_total_info", 0444, d_tracer, &ftrace_update_tot_cnt, &tracing_dyn_info_fops); @@ -4863,6 +4968,8 @@ __init static int tracer_alloc_buffers(void) goto out_free_cpumask; } global_trace.entries = ring_buffer_size(global_trace.buffer); + if (global_trace.buffer_disabled) + tracing_off(); #ifdef CONFIG_TRACER_MAX_TRACE diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 54faec790bc..ce887c0eca5 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -154,6 +154,7 @@ struct trace_array { struct ring_buffer *buffer; unsigned long entries; int cpu; + int buffer_disabled; cycle_t time_start; struct task_struct *waiter; struct trace_array_cpu *data[NR_CPUS]; -- cgit v1.2.3-70-g09d2 From e08b96371625aaa84cb03f51acc4c8e0be27403a Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 4 Jan 2012 10:25:20 +0100 Subject: KVM: s390: add parameter for KVM_CREATE_VM This patch introduces a new config option for user controlled kernel virtual machines. It introduces a parameter to KVM_CREATE_VM that allows to set bits that alter the capabilities of the newly created virtual machine. The parameter is passed to kvm_arch_init_vm for all architectures. The only valid modifier bit for now is KVM_VM_S390_UCONTROL. This requires CAP_SYS_ADMIN privileges and creates a user controlled virtual machine on s390 architectures. Signed-off-by: Carsten Otte Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 7 ++++++- arch/ia64/kvm/kvm-ia64.c | 5 ++++- arch/powerpc/kvm/powerpc.c | 5 ++++- arch/s390/kvm/Kconfig | 9 +++++++++ arch/s390/kvm/kvm-s390.c | 24 +++++++++++++++++++----- arch/s390/kvm/kvm-s390.h | 10 ++++++++++ arch/x86/kvm/x86.c | 5 ++++- include/linux/kvm.h | 3 +++ include/linux/kvm_host.h | 2 +- virt/kvm/kvm_main.c | 13 +++++-------- 10 files changed, 65 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index e1d94bf4056..579d40b26a5 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -95,7 +95,7 @@ described as 'basic' will be available. Capability: basic Architectures: all Type: system ioctl -Parameters: none +Parameters: machine type identifier (KVM_VM_*) Returns: a VM fd that can be used to control the new virtual machine. The new VM has no virtual cpus and no memory. An mmap() of a VM fd @@ -103,6 +103,11 @@ will access the virtual machine's physical address space; offset zero corresponds to guest physical address zero. Use of mmap() on a VM fd is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is available. +You most certainly want to use 0 as machine type. + +In order to create user controlled virtual machines on S390, check +KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as +privileged user (CAP_SYS_ADMIN). 4.3 KVM_GET_MSR_INDEX_LIST diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 40505200249..df6b1419405 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -809,10 +809,13 @@ static void kvm_build_io_pmt(struct kvm *kvm) #define GUEST_PHYSICAL_RR4 0x2739 #define VMM_INIT_RR 0x1660 -int kvm_arch_init_vm(struct kvm *kvm) +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { BUG_ON(!kvm); + if (type) + return -EINVAL; + kvm->arch.is_sn2 = ia64_platform_is("sn2"); kvm->arch.metaphysical_rr0 = GUEST_PHYSICAL_RR0; diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 607fbdf24b8..83f24456987 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -171,8 +171,11 @@ void kvm_arch_check_processor_compat(void *rtn) *(int *)rtn = kvmppc_core_check_processor_compat(); } -int kvm_arch_init_vm(struct kvm *kvm) +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { + if (type) + return -EINVAL; + return kvmppc_core_init_vm(kvm); } diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig index a21634173a6..78eb9847008 100644 --- a/arch/s390/kvm/Kconfig +++ b/arch/s390/kvm/Kconfig @@ -34,6 +34,15 @@ config KVM If unsure, say N. +config KVM_S390_UCONTROL + bool "Userspace controlled virtual machines" + depends on KVM + ---help--- + Allow CAP_SYS_ADMIN users to create KVM virtual machines that are + controlled by userspace. + + If unsure, say N. + # OK, it's a little counter-intuitive to do this, but it puts it neatly under # the virtualization menu. source drivers/vhost/Kconfig diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index d1c44573245..f0937552175 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -171,11 +171,22 @@ long kvm_arch_vm_ioctl(struct file *filp, return r; } -int kvm_arch_init_vm(struct kvm *kvm) +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { int rc; char debug_name[16]; + rc = -EINVAL; +#ifdef CONFIG_KVM_S390_UCONTROL + if (type & ~KVM_VM_S390_UCONTROL) + goto out_err; + if ((type & KVM_VM_S390_UCONTROL) && (!capable(CAP_SYS_ADMIN))) + goto out_err; +#else + if (type) + goto out_err; +#endif + rc = s390_enable_sie(); if (rc) goto out_err; @@ -198,10 +209,13 @@ int kvm_arch_init_vm(struct kvm *kvm) debug_register_view(kvm->arch.dbf, &debug_sprintf_view); VM_EVENT(kvm, 3, "%s", "vm created"); - kvm->arch.gmap = gmap_alloc(current->mm); - if (!kvm->arch.gmap) - goto out_nogmap; - + if (type & KVM_VM_S390_UCONTROL) { + kvm->arch.gmap = NULL; + } else { + kvm->arch.gmap = gmap_alloc(current->mm); + if (!kvm->arch.gmap) + goto out_nogmap; + } return 0; out_nogmap: debug_unregister(kvm->arch.dbf); diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index 99b0b759711..45b236a7c73 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -47,6 +47,16 @@ static inline int __cpu_is_stopped(struct kvm_vcpu *vcpu) return atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOP_INT; } +static inline int kvm_is_ucontrol(struct kvm *kvm) +{ +#ifdef CONFIG_KVM_S390_UCONTROL + if (kvm->arch.gmap) + return 0; + return 1; +#else + return 0; +#endif +} int kvm_s390_handle_wait(struct kvm_vcpu *vcpu); enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer); void kvm_s390_tasklet(unsigned long parm); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9cbfc069811..06925b4bcc2 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6031,8 +6031,11 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) free_page((unsigned long)vcpu->arch.pio_data); } -int kvm_arch_init_vm(struct kvm *kvm) +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { + if (type) + return -EINVAL; + INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); INIT_LIST_HEAD(&kvm->arch.assigned_dev_head); diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 68e67e50d02..bba393a6760 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -431,6 +431,9 @@ struct kvm_ppc_pvinfo { #define KVMIO 0xAE +/* machine type bits, to be used as argument to KVM_CREATE_VM */ +#define KVM_VM_S390_UCONTROL 1 + /* * ioctls for /dev/kvm fds: */ diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 900c76337e8..82375e145e6 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -520,7 +520,7 @@ static inline void kvm_arch_free_vm(struct kvm *kvm) } #endif -int kvm_arch_init_vm(struct kvm *kvm); +int kvm_arch_init_vm(struct kvm *kvm, unsigned long type); void kvm_arch_destroy_vm(struct kvm *kvm); void kvm_free_all_assigned_devices(struct kvm *kvm); void kvm_arch_sync_events(struct kvm *kvm); diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index a91f980077d..32e3b048a6c 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -449,7 +449,7 @@ static void kvm_init_memslots_id(struct kvm *kvm) slots->id_to_index[i] = slots->memslots[i].id = i; } -static struct kvm *kvm_create_vm(void) +static struct kvm *kvm_create_vm(unsigned long type) { int r, i; struct kvm *kvm = kvm_arch_alloc_vm(); @@ -457,7 +457,7 @@ static struct kvm *kvm_create_vm(void) if (!kvm) return ERR_PTR(-ENOMEM); - r = kvm_arch_init_vm(kvm); + r = kvm_arch_init_vm(kvm, type); if (r) goto out_err_nodisable; @@ -2198,12 +2198,12 @@ static struct file_operations kvm_vm_fops = { .llseek = noop_llseek, }; -static int kvm_dev_ioctl_create_vm(void) +static int kvm_dev_ioctl_create_vm(unsigned long type) { int r; struct kvm *kvm; - kvm = kvm_create_vm(); + kvm = kvm_create_vm(type); if (IS_ERR(kvm)) return PTR_ERR(kvm); #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET @@ -2254,10 +2254,7 @@ static long kvm_dev_ioctl(struct file *filp, r = KVM_API_VERSION; break; case KVM_CREATE_VM: - r = -EINVAL; - if (arg) - goto out; - r = kvm_dev_ioctl_create_vm(); + r = kvm_dev_ioctl_create_vm(arg); break; case KVM_CHECK_EXTENSION: r = kvm_dev_ioctl_check_extension_generic(arg); -- cgit v1.2.3-70-g09d2 From 27e0393f15fc8bc855c6a888387ff5ffd2181089 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 4 Jan 2012 10:25:21 +0100 Subject: KVM: s390: ucontrol: per vcpu address spaces This patch introduces two ioctls for virtual cpus, that are only valid for kernel virtual machines that are controlled by userspace. Each virtual cpu has its individual address space in this mode of operation, and each address space is backed by the gmap implementation just like the address space for regular KVM guests. KVM_S390_UCAS_MAP allows to map a part of the user's virtual address space to the vcpu. Starting offset and length in both the user and the vcpu address space need to be aligned to 1M. KVM_S390_UCAS_UNMAP can be used to unmap a range of memory from a virtual cpu in a similar way. Signed-off-by: Carsten Otte Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 38 +++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.c | 50 ++++++++++++++++++++++++++++++++++++++- include/linux/kvm.h | 10 ++++++++ 3 files changed, 97 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 579d40b26a5..ee394b26326 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1496,6 +1496,44 @@ following algorithm: Some guests configure the LINT1 NMI input to cause a panic, aiding in debugging. +4.64 KVM_S390_UCAS_MAP + +Capability: KVM_CAP_S390_UCONTROL +Architectures: s390 +Type: vcpu ioctl +Parameters: struct kvm_s390_ucas_mapping (in) +Returns: 0 in case of success + +The parameter is defined like this: + struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; + }; + +This ioctl maps the memory at "user_addr" with the length "length" to +the vcpu's address space starting at "vcpu_addr". All parameters need to +be alligned by 1 megabyte. + +4.65 KVM_S390_UCAS_UNMAP + +Capability: KVM_CAP_S390_UCONTROL +Architectures: s390 +Type: vcpu ioctl +Parameters: struct kvm_s390_ucas_mapping (in) +Returns: 0 in case of success + +The parameter is defined like this: + struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; + }; + +This ioctl unmaps the memory in the vcpu's address space starting at +"vcpu_addr" with the length "length". The field "user_addr" is ignored. +All parameters need to be alligned by 1 megabyte. + 5. The kvm_run structure Application code obtains a pointer to the kvm_run structure by diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index f0937552175..2d3248895de 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -233,6 +233,10 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) (__u64) vcpu->arch.sie_block) vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda = 0; smp_mb(); + + if (kvm_is_ucontrol(vcpu->kvm)) + gmap_free(vcpu->arch.gmap); + free_page((unsigned long)(vcpu->arch.sie_block)); kvm_vcpu_uninit(vcpu); kfree(vcpu); @@ -263,12 +267,20 @@ void kvm_arch_destroy_vm(struct kvm *kvm) kvm_free_vcpus(kvm); free_page((unsigned long)(kvm->arch.sca)); debug_unregister(kvm->arch.dbf); - gmap_free(kvm->arch.gmap); + if (!kvm_is_ucontrol(kvm)) + gmap_free(kvm->arch.gmap); } /* Section: vcpu related */ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { + if (kvm_is_ucontrol(vcpu->kvm)) { + vcpu->arch.gmap = gmap_alloc(current->mm); + if (!vcpu->arch.gmap) + return -ENOMEM; + return 0; + } + vcpu->arch.gmap = vcpu->kvm->arch.gmap; return 0; } @@ -687,6 +699,42 @@ long kvm_arch_vcpu_ioctl(struct file *filp, case KVM_S390_INITIAL_RESET: r = kvm_arch_vcpu_ioctl_initial_reset(vcpu); break; +#ifdef CONFIG_KVM_S390_UCONTROL + case KVM_S390_UCAS_MAP: { + struct kvm_s390_ucas_mapping ucasmap; + + if (copy_from_user(&ucasmap, argp, sizeof(ucasmap))) { + r = -EFAULT; + break; + } + + if (!kvm_is_ucontrol(vcpu->kvm)) { + r = -EINVAL; + break; + } + + r = gmap_map_segment(vcpu->arch.gmap, ucasmap.user_addr, + ucasmap.vcpu_addr, ucasmap.length); + break; + } + case KVM_S390_UCAS_UNMAP: { + struct kvm_s390_ucas_mapping ucasmap; + + if (copy_from_user(&ucasmap, argp, sizeof(ucasmap))) { + r = -EFAULT; + break; + } + + if (!kvm_is_ucontrol(vcpu->kvm)) { + r = -EINVAL; + break; + } + + r = gmap_unmap_segment(vcpu->arch.gmap, ucasmap.vcpu_addr, + ucasmap.length); + break; + } +#endif default: r = -EINVAL; } diff --git a/include/linux/kvm.h b/include/linux/kvm.h index bba393a6760..0a66c107269 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -658,6 +658,16 @@ struct kvm_clock_data { struct kvm_userspace_memory_region) #define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) #define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) + +/* enable ucontrol for s390 */ +struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; +}; +#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) +#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) + /* Device model IOC */ #define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) #define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) -- cgit v1.2.3-70-g09d2 From e168bf8de33e16a909df2401af1f7d419c5780de Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 4 Jan 2012 10:25:22 +0100 Subject: KVM: s390: ucontrol: export page faults to user This patch introduces a new exit reason in the kvm_run structure named KVM_EXIT_S390_UCONTROL. This exit indicates, that a virtual cpu has regognized a fault on the host page table. The idea is that userspace can handle this fault by mapping memory at the fault location into the cpu's address space and then continue to run the virtual cpu. Signed-off-by: Carsten Otte Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 14 ++++++++++++++ arch/s390/kvm/kvm-s390.c | 32 +++++++++++++++++++++++++++----- arch/s390/kvm/kvm-s390.h | 1 + include/linux/kvm.h | 6 ++++++ 4 files changed, 48 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index ee394b26326..6e53ff51422 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1694,6 +1694,20 @@ s390 specific. s390 specific. + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; + +s390 specific. A page fault has occurred for a user controlled virtual +machine (KVM_VM_S390_UNCONTROL) on it's host page table that cannot be +resolved by the kernel. +The program code and the translation exception code that were placed +in the cpu's lowcore are presented here as defined by the z Architecture +Principles of Operation Book in the Chapter for Dynamic Address Translation +(DAT) + /* KVM_EXIT_DCR */ struct { __u32 dcrn; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 2d3248895de..af05328aca2 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -493,8 +493,10 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; /* not implemented yet */ } -static void __vcpu_run(struct kvm_vcpu *vcpu) +static int __vcpu_run(struct kvm_vcpu *vcpu) { + int rc; + memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16); if (need_resched()) @@ -511,9 +513,15 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); - if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) { - VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction"); - kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs); + if (rc) { + if (kvm_is_ucontrol(vcpu->kvm)) { + rc = SIE_INTERCEPT_UCONTROL; + } else { + VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction"); + kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = 0; + } } VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); @@ -522,6 +530,7 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_enable(); memcpy(&vcpu->arch.guest_gprs[14], &vcpu->arch.sie_block->gg14, 16); + return rc; } int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) @@ -542,6 +551,7 @@ rerun_vcpu: case KVM_EXIT_UNKNOWN: case KVM_EXIT_INTR: case KVM_EXIT_S390_RESET: + case KVM_EXIT_S390_UCONTROL: break; default: BUG(); @@ -553,7 +563,9 @@ rerun_vcpu: might_fault(); do { - __vcpu_run(vcpu); + rc = __vcpu_run(vcpu); + if (rc) + break; rc = kvm_handle_sie_intercept(vcpu); } while (!signal_pending(current) && !rc); @@ -565,6 +577,16 @@ rerun_vcpu: rc = -EINTR; } +#ifdef CONFIG_KVM_S390_UCONTROL + if (rc == SIE_INTERCEPT_UCONTROL) { + kvm_run->exit_reason = KVM_EXIT_S390_UCONTROL; + kvm_run->s390_ucontrol.trans_exc_code = + current->thread.gmap_addr; + kvm_run->s390_ucontrol.pgm_code = 0x10; + rc = 0; + } +#endif + if (rc == -EOPNOTSUPP) { /* intercept cannot be handled in-kernel, prepare kvm-run */ kvm_run->exit_reason = KVM_EXIT_S390_SIEIC; diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index 45b236a7c73..62aa5f19bb9 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -26,6 +26,7 @@ typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu); /* negativ values are error codes, positive values for internal conditions */ #define SIE_INTERCEPT_RERUNVCPU (1<<0) +#define SIE_INTERCEPT_UCONTROL (1<<1) int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu); #define VM_EVENT(d_kvm, d_loglevel, d_string, d_args...)\ diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 0a66c107269..7f686f6708b 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -162,6 +162,7 @@ struct kvm_pit_config { #define KVM_EXIT_INTERNAL_ERROR 17 #define KVM_EXIT_OSI 18 #define KVM_EXIT_PAPR_HCALL 19 +#define KVM_EXIT_S390_UCONTROL 20 /* For KVM_EXIT_INTERNAL_ERROR */ #define KVM_INTERNAL_ERROR_EMULATION 1 @@ -249,6 +250,11 @@ struct kvm_run { #define KVM_S390_RESET_CPU_INIT 8 #define KVM_S390_RESET_IPL 16 __u64 s390_reset_flags; + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; /* KVM_EXIT_DCR */ struct { __u32 dcrn; -- cgit v1.2.3-70-g09d2 From 5b1c1493afe8d69909f9df3221bb2fffdf479f4a Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 4 Jan 2012 10:25:23 +0100 Subject: KVM: s390: ucontrol: export SIE control block to user This patch exports the s390 SIE hardware control block to userspace via the mapping of the vcpu file descriptor. In order to do so, a new arch callback named kvm_arch_vcpu_fault is introduced for all architectures. It allows to map architecture specific pages. Signed-off-by: Carsten Otte Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 5 +++++ arch/ia64/kvm/kvm-ia64.c | 5 +++++ arch/powerpc/kvm/powerpc.c | 5 +++++ arch/s390/kvm/kvm-s390.c | 13 +++++++++++++ arch/x86/kvm/x86.c | 5 +++++ include/linux/kvm.h | 2 ++ include/linux/kvm_host.h | 1 + virt/kvm/kvm_main.c | 2 +- 8 files changed, 37 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 6e53ff51422..5ebf47d99e5 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -218,6 +218,11 @@ allocation of vcpu ids. For example, if userspace wants single-threaded guest vcpus, it should make all vcpu ids be a multiple of the number of vcpus per vcore. +For virtual cpus that have been created with S390 user controlled virtual +machines, the resulting vcpu fd can be memory mapped at page offset +KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual +cpu's hardware control block. + 4.8 KVM_GET_DIRTY_LOG (vm ioctl) Capability: basic diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index df6b1419405..8ca7261e7b3 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1566,6 +1566,11 @@ out: return r; } +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) +{ + return VM_FAULT_SIGBUS; +} + int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 83f24456987..a5671616af8 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -659,6 +659,11 @@ out: return r; } +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) +{ + return VM_FAULT_SIGBUS; +} + static int kvm_vm_ioctl_get_pvinfo(struct kvm_ppc_pvinfo *pvinfo) { u32 inst_lis = 0x3c000000; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index af05328aca2..d6bc65aeb95 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -763,6 +763,19 @@ long kvm_arch_vcpu_ioctl(struct file *filp, return r; } +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) +{ +#ifdef CONFIG_KVM_S390_UCONTROL + if ((vmf->pgoff == KVM_S390_SIE_PAGE_OFFSET) + && (kvm_is_ucontrol(vcpu->kvm))) { + vmf->page = virt_to_page(vcpu->arch.sie_block); + get_page(vmf->page); + return 0; + } +#endif + return VM_FAULT_SIGBUS; +} + /* Section: memory related */ int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 06925b4bcc2..a3ce196d21f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2814,6 +2814,11 @@ out: return r; } +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) +{ + return VM_FAULT_SIGBUS; +} + static int kvm_vm_ioctl_set_tss_addr(struct kvm *kvm, unsigned long addr) { int ret; diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 7f686f6708b..8f888df206a 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -440,6 +440,8 @@ struct kvm_ppc_pvinfo { /* machine type bits, to be used as argument to KVM_CREATE_VM */ #define KVM_VM_S390_UCONTROL 1 +#define KVM_S390_SIE_PAGE_OFFSET 1 + /* * ioctls for /dev/kvm fds: */ diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 82375e145e6..d4d4d709211 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -450,6 +450,7 @@ long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); +int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf); int kvm_dev_ioctl_check_extension(long ext); diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 32e3b048a6c..64be836f334 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1657,7 +1657,7 @@ static int kvm_vcpu_fault(struct vm_area_struct *vma, struct vm_fault *vmf) page = virt_to_page(vcpu->kvm->coalesced_mmio_ring); #endif else - return VM_FAULT_SIGBUS; + return kvm_arch_vcpu_fault(vcpu, vmf); get_page(page); vmf->page = page; return 0; -- cgit v1.2.3-70-g09d2 From ccc7910fe564d99415def7c041fa261e62a43011 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 4 Jan 2012 10:25:26 +0100 Subject: KVM: s390: ucontrol: interface to inject faults on a vcpu page table This patch allows the user to fault in pages on a virtual cpus address space for user controlled virtual machines. Typically this is superfluous because userspace can just create a mapping and let the kernel's page fault logic take are of it. There is one exception: SIE won't start if the lowcore is not present. Normally the kernel takes care of this [handle_validity() in arch/s390/kvm/intercept.c] but since the kernel does not handle intercepts for user controlled virtual machines, userspace needs to be able to handle this condition. Signed-off-by: Carsten Otte Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 16 ++++++++++++++++ arch/s390/kvm/kvm-s390.c | 6 ++++++ include/linux/kvm.h | 1 + 3 files changed, 23 insertions(+) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 5ebf47d99e5..a67fb35993f 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1539,6 +1539,22 @@ This ioctl unmaps the memory in the vcpu's address space starting at "vcpu_addr" with the length "length". The field "user_addr" is ignored. All parameters need to be alligned by 1 megabyte. +4.66 KVM_S390_VCPU_FAULT + +Capability: KVM_CAP_S390_UCONTROL +Architectures: s390 +Type: vcpu ioctl +Parameters: vcpu absolute address (in) +Returns: 0 in case of success + +This call creates a page table entry on the virtual cpu's address space +(for user controlled virtual machines) or the virtual machine's address +space (for regular virtual machines). This only works for minor faults, +thus it's recommended to access subject memory page via the user page +table upfront. This is useful to handle validity intercepts for user +controlled virtual machines to fault in the virtual cpu's lowcore pages +prior to calling the KVM_RUN ioctl. + 5. The kvm_run structure Application code obtains a pointer to the kvm_run structure by diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 5b5c28e471d..8489edf80c8 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -761,6 +761,12 @@ long kvm_arch_vcpu_ioctl(struct file *filp, break; } #endif + case KVM_S390_VCPU_FAULT: { + r = gmap_fault(arg, vcpu->arch.gmap); + if (!IS_ERR_VALUE(r)) + r = 0; + break; + } default: r = -EINVAL; } diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 8f888df206a..778e748927b 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -675,6 +675,7 @@ struct kvm_s390_ucas_mapping { }; #define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) #define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) +#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long) /* Device model IOC */ #define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) -- cgit v1.2.3-70-g09d2 From 1efd0f595ab9d10fef1486dfdef952107c91f3db Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 4 Jan 2012 10:25:29 +0100 Subject: KVM: s390: ucontrol: announce capability for user controlled vms This patch announces a new capability KVM_CAP_S390_UCONTROL that indicates that kvm can now support virtual machines that are controlled by userspace. Signed-off-by: Carsten Otte Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/s390/kvm/kvm-s390.c | 3 +++ include/linux/kvm.h | 1 + 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index abf784d8c68..a1061b361c4 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -129,6 +129,9 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_S390_PSW: case KVM_CAP_S390_GMAP: case KVM_CAP_SYNC_MMU: +#ifdef CONFIG_KVM_S390_UCONTROL + case KVM_CAP_S390_UCONTROL: +#endif r = 1; break; default: diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 778e748927b..6cf048d9604 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -569,6 +569,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_S390_GMAP 71 #define KVM_CAP_TSC_DEADLINE_TIMER 72 +#define KVM_CAP_S390_UCONTROL 73 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.2.3-70-g09d2 From b9e5dc8d4511e6a00862a795319569e7fe7f60f4 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 11 Jan 2012 11:20:30 +0100 Subject: KVM: provide synchronous registers in kvm_run On some cpus the overhead for virtualization instructions is in the same range as a system call. Having to call multiple ioctls to get set registers will make certain userspace handled exits more expensive than necessary. Lets provide a section in kvm_run that works as a shared save area for guest registers. We also provide two 64bit flags fields (architecture specific), that will specify 1. which parts of these fields are valid. 2. which registers were modified by userspace Each bit for these flag fields will define a group of registers (like general purpose) or a single register. Signed-off-by: Christian Borntraeger Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 23 +++++++++++++++++++++++ arch/ia64/include/asm/kvm.h | 4 ++++ arch/powerpc/include/asm/kvm.h | 4 ++++ arch/s390/include/asm/kvm.h | 3 +++ arch/x86/include/asm/kvm.h | 4 ++++ include/linux/kvm.h | 15 +++++++++++++++ 6 files changed, 53 insertions(+) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index a67fb35993f..7ca696227d3 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1771,6 +1771,29 @@ developer registration required to access it). /* Fix the size of the union. */ char padding[256]; }; + + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[1024]; + } s; + +If KVM_CAP_SYNC_REGS is defined, these fields allow userspace to access +certain guest registers without having to call SET/GET_*REGS. Thus we can +avoid some system call overhead if userspace has to handle the exit. +Userspace can query the validity of the structure by checking +kvm_valid_regs for specific bits. These bits are architecture specific +and usually define the validity of a groups of registers. (e.g. one bit + for general purpose registers) + }; 6. Capabilities that can be enabled diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h index bc90c75adf6..b9f82c84f09 100644 --- a/arch/ia64/include/asm/kvm.h +++ b/arch/ia64/include/asm/kvm.h @@ -261,4 +261,8 @@ struct kvm_debug_exit_arch { struct kvm_guest_debug_arch { }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + #endif diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index f7727d91ac6..7d9d4de057e 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -265,6 +265,10 @@ struct kvm_debug_exit_arch { struct kvm_guest_debug_arch { }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + #define KVM_REG_MASK 0x001f #define KVM_REG_EXT_MASK 0xffe0 #define KVM_REG_GPR 0x0000 diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h index 82b32a100c7..325560afb77 100644 --- a/arch/s390/include/asm/kvm.h +++ b/arch/s390/include/asm/kvm.h @@ -41,4 +41,7 @@ struct kvm_debug_exit_arch { struct kvm_guest_debug_arch { }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; #endif diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h index 4d8dcbdfc12..e7d1c194d27 100644 --- a/arch/x86/include/asm/kvm.h +++ b/arch/x86/include/asm/kvm.h @@ -321,4 +321,8 @@ struct kvm_xcrs { __u64 padding[16]; }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + #endif /* _ASM_X86_KVM_H */ diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 6cf048d9604..245bcb3a0fc 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -279,6 +279,20 @@ struct kvm_run { /* Fix the size of the union. */ char padding[256]; }; + + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[1024]; + } s; }; /* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */ @@ -570,6 +584,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_S390_GMAP 71 #define KVM_CAP_TSC_DEADLINE_TIMER 72 #define KVM_CAP_S390_UCONTROL 73 +#define KVM_CAP_SYNC_REGS 74 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.2.3-70-g09d2 From dc83b8bc0256ee682506ed83853a98eaba529c6f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 18 Aug 2011 15:25:21 -0500 Subject: KVM: PPC: e500: MMU API This implements a shared-memory API for giving host userspace access to the guest's TLB. Signed-off-by: Scott Wood Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 74 +++++++ arch/powerpc/include/asm/kvm.h | 35 ++++ arch/powerpc/include/asm/kvm_e500.h | 24 +-- arch/powerpc/include/asm/kvm_ppc.h | 5 + arch/powerpc/kvm/e500.c | 5 +- arch/powerpc/kvm/e500_emulate.c | 12 +- arch/powerpc/kvm/e500_tlb.c | 393 ++++++++++++++++++++++++------------ arch/powerpc/kvm/e500_tlb.h | 38 ++-- arch/powerpc/kvm/powerpc.c | 28 +++ include/linux/kvm.h | 18 ++ 10 files changed, 469 insertions(+), 163 deletions(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 7ca696227d3..bcd45d5afca 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1409,6 +1409,38 @@ The following flags are defined: If datamatch flag is set, the event will be signaled only if the written value to the registered address is equal to datamatch in struct kvm_ioeventfd. +4.59 KVM_DIRTY_TLB + +Capability: KVM_CAP_SW_TLB +Architectures: ppc +Type: vcpu ioctl +Parameters: struct kvm_dirty_tlb (in) +Returns: 0 on success, -1 on error + +struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; +}; + +This must be called whenever userspace has changed an entry in the shared +TLB, prior to calling KVM_RUN on the associated vcpu. + +The "bitmap" field is the userspace address of an array. This array +consists of a number of bits, equal to the total number of TLB entries as +determined by the last successful call to KVM_CONFIG_TLB, rounded up to the +nearest multiple of 64. + +Each bit corresponds to one TLB entry, ordered the same as in the shared TLB +array. + +The array is little-endian: the bit 0 is the least significant bit of the +first byte, bit 8 is the least significant bit of the second byte, etc. +This avoids any complications with differing word sizes. + +The "num_dirty" field is a performance hint for KVM to determine whether it +should skip processing the bitmap and just invalidate everything. It must +be set to the number of set bits in the bitmap. + 4.62 KVM_CREATE_SPAPR_TCE Capability: KVM_CAP_SPAPR_TCE @@ -1842,3 +1874,45 @@ HTAB address part of SDR1 contains an HVA instead of a GPA, as PAPR keeps the HTAB invisible to the guest. When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur. + +6.3 KVM_CAP_SW_TLB + +Architectures: ppc +Parameters: args[0] is the address of a struct kvm_config_tlb +Returns: 0 on success; -1 on error + +struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; +}; + +Configures the virtual CPU's TLB array, establishing a shared memory area +between userspace and KVM. The "params" and "array" fields are userspace +addresses of mmu-type-specific data structures. The "array_len" field is an +safety mechanism, and should be set to the size in bytes of the memory that +userspace has reserved for the array. It must be at least the size dictated +by "mmu_type" and "params". + +While KVM_RUN is active, the shared region is under control of KVM. Its +contents are undefined, and any modification by userspace results in +boundedly undefined behavior. + +On return from KVM_RUN, the shared region will reflect the current state of +the guest's TLB. If userspace makes any changes, it must call KVM_DIRTY_TLB +to tell KVM which entries have been changed, prior to calling KVM_RUN again +on this vcpu. + +For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV: + - The "params" field is of type "struct kvm_book3e_206_tlb_params". + - The "array" field points to an array of type "struct + kvm_book3e_206_tlb_entry". + - The array consists of all entries in the first TLB, followed by all + entries in the second TLB. + - Within a TLB, entries are ordered first by increasing set number. Within a + set, entries are ordered by way (increasing ESEL). + - The hash for determining set number in TLB0 is: (MAS2 >> 12) & (num_sets - 1) + where "num_sets" is the tlb_sizes[] value divided by the tlb_ways[] value. + - The tsize field of mas1 shall be set to 4K on TLB0, even though the + hardware ignores this value for TLB0. diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index 7d9d4de057e..663c57f8716 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -296,4 +296,39 @@ struct kvm_allocate_rma { __u64 rma_size; }; +struct kvm_book3e_206_tlb_entry { + __u32 mas8; + __u32 mas1; + __u64 mas2; + __u64 mas7_3; +}; + +struct kvm_book3e_206_tlb_params { + /* + * For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV: + * + * - The number of ways of TLB0 must be a power of two between 2 and + * 16. + * - TLB1 must be fully associative. + * - The size of TLB0 must be a multiple of the number of ways, and + * the number of sets must be a power of two. + * - The size of TLB1 may not exceed 64 entries. + * - TLB0 supports 4 KiB pages. + * - The page sizes supported by TLB1 are as indicated by + * TLB1CFG (if MMUCFG[MAVN] = 0) or TLB1PS (if MMUCFG[MAVN] = 1) + * as returned by KVM_GET_SREGS. + * - TLB2 and TLB3 are reserved, and their entries in tlb_sizes[] + * and tlb_ways[] must be zero. + * + * tlb_ways[n] = tlb_sizes[n] means the array is fully associative. + * + * KVM will adjust TLBnCFG based on the sizes configured here, + * though arrays greater than 2048 entries will have TLBnCFG[NENTRY] + * set to zero. + */ + __u32 tlb_sizes[4]; + __u32 tlb_ways[4]; + __u32 reserved[8]; +}; + #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/arch/powerpc/include/asm/kvm_e500.h b/arch/powerpc/include/asm/kvm_e500.h index a5197d816ec..bc17441535f 100644 --- a/arch/powerpc/include/asm/kvm_e500.h +++ b/arch/powerpc/include/asm/kvm_e500.h @@ -22,13 +22,6 @@ #define E500_PID_NUM 3 #define E500_TLB_NUM 2 -struct tlbe{ - u32 mas1; - u32 mas2; - u32 mas3; - u32 mas7; -}; - #define E500_TLB_VALID 1 #define E500_TLB_DIRTY 2 @@ -48,13 +41,17 @@ struct kvmppc_e500_tlb_params { }; struct kvmppc_vcpu_e500 { - /* Unmodified copy of the guest's TLB. */ - struct tlbe *gtlb_arch[E500_TLB_NUM]; + /* Unmodified copy of the guest's TLB -- shared with host userspace. */ + struct kvm_book3e_206_tlb_entry *gtlb_arch; + + /* Starting entry number in gtlb_arch[] */ + int gtlb_offset[E500_TLB_NUM]; /* KVM internal information associated with each guest TLB entry */ struct tlbe_priv *gtlb_priv[E500_TLB_NUM]; - unsigned int gtlb_size[E500_TLB_NUM]; + struct kvmppc_e500_tlb_params gtlb_params[E500_TLB_NUM]; + unsigned int gtlb_nv[E500_TLB_NUM]; /* @@ -68,7 +65,6 @@ struct kvmppc_vcpu_e500 { * and back, and our host TLB entries got evicted). */ struct tlbe_ref *tlb_refs[E500_TLB_NUM]; - unsigned int host_tlb1_nv; u32 host_pid[E500_PID_NUM]; @@ -78,11 +74,10 @@ struct kvmppc_vcpu_e500 { u32 mas0; u32 mas1; u32 mas2; - u32 mas3; + u64 mas7_3; u32 mas4; u32 mas5; u32 mas6; - u32 mas7; /* vcpu id table */ struct vcpu_id_table *idt; @@ -95,6 +90,9 @@ struct kvmppc_vcpu_e500 { u32 tlb1cfg; u64 mcar; + struct page **shared_tlb_pages; + int num_shared_tlb_pages; + struct kvm_vcpu vcpu; }; diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 46efd1a265c..a284f209e2d 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -193,4 +193,9 @@ static inline void kvm_rma_init(void) {} #endif +int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu, + struct kvm_config_tlb *cfg); +int kvm_vcpu_ioctl_dirty_tlb(struct kvm_vcpu *vcpu, + struct kvm_dirty_tlb *cfg); + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c index 8c0d45a6faf..f17d7e732a1 100644 --- a/arch/powerpc/kvm/e500.c +++ b/arch/powerpc/kvm/e500.c @@ -121,7 +121,7 @@ void kvmppc_core_get_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) sregs->u.e.mas0 = vcpu_e500->mas0; sregs->u.e.mas1 = vcpu_e500->mas1; sregs->u.e.mas2 = vcpu_e500->mas2; - sregs->u.e.mas7_3 = ((u64)vcpu_e500->mas7 << 32) | vcpu_e500->mas3; + sregs->u.e.mas7_3 = vcpu_e500->mas7_3; sregs->u.e.mas4 = vcpu_e500->mas4; sregs->u.e.mas6 = vcpu_e500->mas6; @@ -154,8 +154,7 @@ int kvmppc_core_set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) vcpu_e500->mas0 = sregs->u.e.mas0; vcpu_e500->mas1 = sregs->u.e.mas1; vcpu_e500->mas2 = sregs->u.e.mas2; - vcpu_e500->mas7 = sregs->u.e.mas7_3 >> 32; - vcpu_e500->mas3 = (u32)sregs->u.e.mas7_3; + vcpu_e500->mas7_3 = sregs->u.e.mas7_3; vcpu_e500->mas4 = sregs->u.e.mas4; vcpu_e500->mas6 = sregs->u.e.mas6; } diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c index d48ae396f41..e0d36099c75 100644 --- a/arch/powerpc/kvm/e500_emulate.c +++ b/arch/powerpc/kvm/e500_emulate.c @@ -95,13 +95,17 @@ int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs) case SPRN_MAS2: vcpu_e500->mas2 = spr_val; break; case SPRN_MAS3: - vcpu_e500->mas3 = spr_val; break; + vcpu_e500->mas7_3 &= ~(u64)0xffffffff; + vcpu_e500->mas7_3 |= spr_val; + break; case SPRN_MAS4: vcpu_e500->mas4 = spr_val; break; case SPRN_MAS6: vcpu_e500->mas6 = spr_val; break; case SPRN_MAS7: - vcpu_e500->mas7 = spr_val; break; + vcpu_e500->mas7_3 &= (u64)0xffffffff; + vcpu_e500->mas7_3 |= (u64)spr_val << 32; + break; case SPRN_L1CSR0: vcpu_e500->l1csr0 = spr_val; vcpu_e500->l1csr0 &= ~(L1CSR0_DCFI | L1CSR0_CLFC); @@ -158,13 +162,13 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt) case SPRN_MAS2: kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas2); break; case SPRN_MAS3: - kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas3); break; + kvmppc_set_gpr(vcpu, rt, (u32)vcpu_e500->mas7_3); break; case SPRN_MAS4: kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas4); break; case SPRN_MAS6: kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas6); break; case SPRN_MAS7: - kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas7); break; + kvmppc_set_gpr(vcpu, rt, vcpu_e500->mas7_3 >> 32); break; case SPRN_TLB0CFG: kvmppc_set_gpr(vcpu, rt, vcpu_e500->tlb0cfg); break; diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index 59221bb1e00..f19ae2f6152 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -19,6 +19,11 @@ #include #include #include +#include +#include +#include +#include +#include #include #include @@ -66,6 +71,13 @@ static DEFINE_PER_CPU(unsigned long, pcpu_last_used_sid); static struct kvmppc_e500_tlb_params host_tlb_params[E500_TLB_NUM]; +static struct kvm_book3e_206_tlb_entry *get_entry( + struct kvmppc_vcpu_e500 *vcpu_e500, int tlbsel, int entry) +{ + int offset = vcpu_e500->gtlb_offset[tlbsel]; + return &vcpu_e500->gtlb_arch[offset + entry]; +} + /* * Allocate a free shadow id and setup a valid sid mapping in given entry. * A mapping is only valid when vcpu_id_table and pcpu_id_table are match. @@ -217,34 +229,13 @@ void kvmppc_e500_recalc_shadow_pid(struct kvmppc_vcpu_e500 *vcpu_e500) preempt_enable(); } -void kvmppc_dump_tlbs(struct kvm_vcpu *vcpu) -{ - struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); - struct tlbe *tlbe; - int i, tlbsel; - - printk("| %8s | %8s | %8s | %8s | %8s |\n", - "nr", "mas1", "mas2", "mas3", "mas7"); - - for (tlbsel = 0; tlbsel < 2; tlbsel++) { - printk("Guest TLB%d:\n", tlbsel); - for (i = 0; i < vcpu_e500->gtlb_size[tlbsel]; i++) { - tlbe = &vcpu_e500->gtlb_arch[tlbsel][i]; - if (tlbe->mas1 & MAS1_VALID) - printk(" G[%d][%3d] | %08X | %08X | %08X | %08X |\n", - tlbsel, i, tlbe->mas1, tlbe->mas2, - tlbe->mas3, tlbe->mas7); - } - } -} - static inline unsigned int gtlb0_get_next_victim( struct kvmppc_vcpu_e500 *vcpu_e500) { unsigned int victim; victim = vcpu_e500->gtlb_nv[0]++; - if (unlikely(vcpu_e500->gtlb_nv[0] >= KVM_E500_TLB0_WAY_NUM)) + if (unlikely(vcpu_e500->gtlb_nv[0] >= vcpu_e500->gtlb_params[0].ways)) vcpu_e500->gtlb_nv[0] = 0; return victim; @@ -256,9 +247,9 @@ static inline unsigned int tlb1_max_shadow_size(void) return host_tlb_params[1].entries - tlbcam_index - 1; } -static inline int tlbe_is_writable(struct tlbe *tlbe) +static inline int tlbe_is_writable(struct kvm_book3e_206_tlb_entry *tlbe) { - return tlbe->mas3 & (MAS3_SW|MAS3_UW); + return tlbe->mas7_3 & (MAS3_SW|MAS3_UW); } static inline u32 e500_shadow_mas3_attrib(u32 mas3, int usermode) @@ -289,39 +280,41 @@ static inline u32 e500_shadow_mas2_attrib(u32 mas2, int usermode) /* * writing shadow tlb entry to host TLB */ -static inline void __write_host_tlbe(struct tlbe *stlbe, uint32_t mas0) +static inline void __write_host_tlbe(struct kvm_book3e_206_tlb_entry *stlbe, + uint32_t mas0) { unsigned long flags; local_irq_save(flags); mtspr(SPRN_MAS0, mas0); mtspr(SPRN_MAS1, stlbe->mas1); - mtspr(SPRN_MAS2, stlbe->mas2); - mtspr(SPRN_MAS3, stlbe->mas3); - mtspr(SPRN_MAS7, stlbe->mas7); + mtspr(SPRN_MAS2, (unsigned long)stlbe->mas2); + mtspr(SPRN_MAS3, (u32)stlbe->mas7_3); + mtspr(SPRN_MAS7, (u32)(stlbe->mas7_3 >> 32)); asm volatile("isync; tlbwe" : : : "memory"); local_irq_restore(flags); } /* esel is index into set, not whole array */ static inline void write_host_tlbe(struct kvmppc_vcpu_e500 *vcpu_e500, - int tlbsel, int esel, struct tlbe *stlbe) + int tlbsel, int esel, struct kvm_book3e_206_tlb_entry *stlbe) { if (tlbsel == 0) { - __write_host_tlbe(stlbe, MAS0_TLBSEL(0) | MAS0_ESEL(esel)); + int way = esel & (vcpu_e500->gtlb_params[0].ways - 1); + __write_host_tlbe(stlbe, MAS0_TLBSEL(0) | MAS0_ESEL(way)); } else { __write_host_tlbe(stlbe, MAS0_TLBSEL(1) | MAS0_ESEL(to_htlb1_esel(esel))); } trace_kvm_stlb_write(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2, - stlbe->mas3, stlbe->mas7); + (u32)stlbe->mas7_3, (u32)(stlbe->mas7_3 >> 32)); } void kvmppc_map_magic(struct kvm_vcpu *vcpu) { struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); - struct tlbe magic; + struct kvm_book3e_206_tlb_entry magic; ulong shared_page = ((ulong)vcpu->arch.shared) & PAGE_MASK; unsigned int stid; pfn_t pfn; @@ -335,9 +328,8 @@ void kvmppc_map_magic(struct kvm_vcpu *vcpu) magic.mas1 = MAS1_VALID | MAS1_TS | MAS1_TID(stid) | MAS1_TSIZE(BOOK3E_PAGESZ_4K); magic.mas2 = vcpu->arch.magic_page_ea | MAS2_M; - magic.mas3 = (pfn << PAGE_SHIFT) | - MAS3_SW | MAS3_SR | MAS3_UW | MAS3_UR; - magic.mas7 = pfn >> (32 - PAGE_SHIFT); + magic.mas7_3 = ((u64)pfn << PAGE_SHIFT) | + MAS3_SW | MAS3_SR | MAS3_UW | MAS3_UR; __write_host_tlbe(&magic, MAS0_TLBSEL(1) | MAS0_ESEL(tlbcam_index)); preempt_enable(); @@ -358,7 +350,8 @@ void kvmppc_e500_tlb_put(struct kvm_vcpu *vcpu) static void inval_gtlbe_on_host(struct kvmppc_vcpu_e500 *vcpu_e500, int tlbsel, int esel) { - struct tlbe *gtlbe = &vcpu_e500->gtlb_arch[tlbsel][esel]; + struct kvm_book3e_206_tlb_entry *gtlbe = + get_entry(vcpu_e500, tlbsel, esel); struct vcpu_id_table *idt = vcpu_e500->idt; unsigned int pr, tid, ts, pid; u32 val, eaddr; @@ -424,9 +417,8 @@ static int tlb0_set_base(gva_t addr, int sets, int ways) static int gtlb0_set_base(struct kvmppc_vcpu_e500 *vcpu_e500, gva_t addr) { - int sets = KVM_E500_TLB0_SIZE / KVM_E500_TLB0_WAY_NUM; - - return tlb0_set_base(addr, sets, KVM_E500_TLB0_WAY_NUM); + return tlb0_set_base(addr, vcpu_e500->gtlb_params[0].sets, + vcpu_e500->gtlb_params[0].ways); } static int htlb0_set_base(gva_t addr) @@ -440,10 +432,10 @@ static unsigned int get_tlb_esel(struct kvmppc_vcpu_e500 *vcpu_e500, int tlbsel) unsigned int esel = get_tlb_esel_bit(vcpu_e500); if (tlbsel == 0) { - esel &= KVM_E500_TLB0_WAY_NUM_MASK; + esel &= vcpu_e500->gtlb_params[0].ways - 1; esel += gtlb0_set_base(vcpu_e500, vcpu_e500->mas2); } else { - esel &= vcpu_e500->gtlb_size[tlbsel] - 1; + esel &= vcpu_e500->gtlb_params[tlbsel].entries - 1; } return esel; @@ -453,19 +445,22 @@ static unsigned int get_tlb_esel(struct kvmppc_vcpu_e500 *vcpu_e500, int tlbsel) static int kvmppc_e500_tlb_index(struct kvmppc_vcpu_e500 *vcpu_e500, gva_t eaddr, int tlbsel, unsigned int pid, int as) { - int size = vcpu_e500->gtlb_size[tlbsel]; - unsigned int set_base; + int size = vcpu_e500->gtlb_params[tlbsel].entries; + unsigned int set_base, offset; int i; if (tlbsel == 0) { set_base = gtlb0_set_base(vcpu_e500, eaddr); - size = KVM_E500_TLB0_WAY_NUM; + size = vcpu_e500->gtlb_params[0].ways; } else { set_base = 0; } + offset = vcpu_e500->gtlb_offset[tlbsel]; + for (i = 0; i < size; i++) { - struct tlbe *tlbe = &vcpu_e500->gtlb_arch[tlbsel][set_base + i]; + struct kvm_book3e_206_tlb_entry *tlbe = + &vcpu_e500->gtlb_arch[offset + set_base + i]; unsigned int tid; if (eaddr < get_tlb_eaddr(tlbe)) @@ -491,7 +486,7 @@ static int kvmppc_e500_tlb_index(struct kvmppc_vcpu_e500 *vcpu_e500, } static inline void kvmppc_e500_ref_setup(struct tlbe_ref *ref, - struct tlbe *gtlbe, + struct kvm_book3e_206_tlb_entry *gtlbe, pfn_t pfn) { ref->pfn = pfn; @@ -518,7 +513,7 @@ static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) int tlbsel = 0; int i; - for (i = 0; i < vcpu_e500->gtlb_size[tlbsel]; i++) { + for (i = 0; i < vcpu_e500->gtlb_params[tlbsel].entries; i++) { struct tlbe_ref *ref = &vcpu_e500->gtlb_priv[tlbsel][i].ref; kvmppc_e500_ref_release(ref); @@ -530,6 +525,8 @@ static void clear_tlb_refs(struct kvmppc_vcpu_e500 *vcpu_e500) int stlbsel = 1; int i; + kvmppc_e500_id_table_reset_all(vcpu_e500); + for (i = 0; i < host_tlb_params[stlbsel].entries; i++) { struct tlbe_ref *ref = &vcpu_e500->tlb_refs[stlbsel][i]; @@ -559,18 +556,18 @@ static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu, | MAS1_TSIZE(tsized); vcpu_e500->mas2 = (eaddr & MAS2_EPN) | (vcpu_e500->mas4 & MAS2_ATTRIB_MASK); - vcpu_e500->mas3 &= MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3; + vcpu_e500->mas7_3 &= MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3; vcpu_e500->mas6 = (vcpu_e500->mas6 & MAS6_SPID1) | (get_cur_pid(vcpu) << 16) | (as ? MAS6_SAS : 0); - vcpu_e500->mas7 = 0; } /* TID must be supplied by the caller */ -static inline void kvmppc_e500_setup_stlbe(struct kvmppc_vcpu_e500 *vcpu_e500, - struct tlbe *gtlbe, int tsize, - struct tlbe_ref *ref, - u64 gvaddr, struct tlbe *stlbe) +static inline void kvmppc_e500_setup_stlbe( + struct kvmppc_vcpu_e500 *vcpu_e500, + struct kvm_book3e_206_tlb_entry *gtlbe, + int tsize, struct tlbe_ref *ref, u64 gvaddr, + struct kvm_book3e_206_tlb_entry *stlbe) { pfn_t pfn = ref->pfn; @@ -581,16 +578,16 @@ static inline void kvmppc_e500_setup_stlbe(struct kvmppc_vcpu_e500 *vcpu_e500, stlbe->mas2 = (gvaddr & MAS2_EPN) | e500_shadow_mas2_attrib(gtlbe->mas2, vcpu_e500->vcpu.arch.shared->msr & MSR_PR); - stlbe->mas3 = ((pfn << PAGE_SHIFT) & MAS3_RPN) - | e500_shadow_mas3_attrib(gtlbe->mas3, + stlbe->mas7_3 = ((u64)pfn << PAGE_SHIFT) + | e500_shadow_mas3_attrib(gtlbe->mas7_3, vcpu_e500->vcpu.arch.shared->msr & MSR_PR); - stlbe->mas7 = (pfn >> (32 - PAGE_SHIFT)) & MAS7_RPN; } /* sesel is an index into the entire array, not just the set */ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, - u64 gvaddr, gfn_t gfn, struct tlbe *gtlbe, int tlbsel, int sesel, - struct tlbe *stlbe, struct tlbe_ref *ref) + u64 gvaddr, gfn_t gfn, struct kvm_book3e_206_tlb_entry *gtlbe, + int tlbsel, int sesel, struct kvm_book3e_206_tlb_entry *stlbe, + struct tlbe_ref *ref) { struct kvm_memory_slot *slot; unsigned long pfn, hva; @@ -700,15 +697,16 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, /* XXX only map the one-one case, for now use TLB0 */ static int kvmppc_e500_tlb0_map(struct kvmppc_vcpu_e500 *vcpu_e500, - int esel, struct tlbe *stlbe) + int esel, + struct kvm_book3e_206_tlb_entry *stlbe) { - struct tlbe *gtlbe; + struct kvm_book3e_206_tlb_entry *gtlbe; struct tlbe_ref *ref; int sesel = esel & (host_tlb_params[0].ways - 1); int sesel_base; gva_t ea; - gtlbe = &vcpu_e500->gtlb_arch[0][esel]; + gtlbe = get_entry(vcpu_e500, 0, esel); ref = &vcpu_e500->gtlb_priv[0][esel].ref; ea = get_tlb_eaddr(gtlbe); @@ -725,7 +723,8 @@ static int kvmppc_e500_tlb0_map(struct kvmppc_vcpu_e500 *vcpu_e500, * the shadow TLB. */ /* XXX for both one-one and one-to-many , for now use TLB1 */ static int kvmppc_e500_tlb1_map(struct kvmppc_vcpu_e500 *vcpu_e500, - u64 gvaddr, gfn_t gfn, struct tlbe *gtlbe, struct tlbe *stlbe) + u64 gvaddr, gfn_t gfn, struct kvm_book3e_206_tlb_entry *gtlbe, + struct kvm_book3e_206_tlb_entry *stlbe) { struct tlbe_ref *ref; unsigned int victim; @@ -754,7 +753,8 @@ static inline int kvmppc_e500_gtlbe_invalidate( struct kvmppc_vcpu_e500 *vcpu_e500, int tlbsel, int esel) { - struct tlbe *gtlbe = &vcpu_e500->gtlb_arch[tlbsel][esel]; + struct kvm_book3e_206_tlb_entry *gtlbe = + get_entry(vcpu_e500, tlbsel, esel); if (unlikely(get_tlb_iprot(gtlbe))) return -1; @@ -769,10 +769,10 @@ int kvmppc_e500_emul_mt_mmucsr0(struct kvmppc_vcpu_e500 *vcpu_e500, ulong value) int esel; if (value & MMUCSR0_TLB0FI) - for (esel = 0; esel < vcpu_e500->gtlb_size[0]; esel++) + for (esel = 0; esel < vcpu_e500->gtlb_params[0].entries; esel++) kvmppc_e500_gtlbe_invalidate(vcpu_e500, 0, esel); if (value & MMUCSR0_TLB1FI) - for (esel = 0; esel < vcpu_e500->gtlb_size[1]; esel++) + for (esel = 0; esel < vcpu_e500->gtlb_params[1].entries; esel++) kvmppc_e500_gtlbe_invalidate(vcpu_e500, 1, esel); /* Invalidate all vcpu id mappings */ @@ -797,7 +797,8 @@ int kvmppc_e500_emul_tlbivax(struct kvm_vcpu *vcpu, int ra, int rb) if (ia) { /* invalidate all entries */ - for (esel = 0; esel < vcpu_e500->gtlb_size[tlbsel]; esel++) + for (esel = 0; esel < vcpu_e500->gtlb_params[tlbsel].entries; + esel++) kvmppc_e500_gtlbe_invalidate(vcpu_e500, tlbsel, esel); } else { ea &= 0xfffff000; @@ -817,18 +818,17 @@ int kvmppc_e500_emul_tlbre(struct kvm_vcpu *vcpu) { struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); int tlbsel, esel; - struct tlbe *gtlbe; + struct kvm_book3e_206_tlb_entry *gtlbe; tlbsel = get_tlb_tlbsel(vcpu_e500); esel = get_tlb_esel(vcpu_e500, tlbsel); - gtlbe = &vcpu_e500->gtlb_arch[tlbsel][esel]; + gtlbe = get_entry(vcpu_e500, tlbsel, esel); vcpu_e500->mas0 &= ~MAS0_NV(~0); vcpu_e500->mas0 |= MAS0_NV(vcpu_e500->gtlb_nv[tlbsel]); vcpu_e500->mas1 = gtlbe->mas1; vcpu_e500->mas2 = gtlbe->mas2; - vcpu_e500->mas3 = gtlbe->mas3; - vcpu_e500->mas7 = gtlbe->mas7; + vcpu_e500->mas7_3 = gtlbe->mas7_3; return EMULATE_DONE; } @@ -839,7 +839,7 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb) int as = !!get_cur_sas(vcpu_e500); unsigned int pid = get_cur_spid(vcpu_e500); int esel, tlbsel; - struct tlbe *gtlbe = NULL; + struct kvm_book3e_206_tlb_entry *gtlbe = NULL; gva_t ea; ea = kvmppc_get_gpr(vcpu, rb); @@ -847,7 +847,7 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb) for (tlbsel = 0; tlbsel < 2; tlbsel++) { esel = kvmppc_e500_tlb_index(vcpu_e500, ea, tlbsel, pid, as); if (esel >= 0) { - gtlbe = &vcpu_e500->gtlb_arch[tlbsel][esel]; + gtlbe = get_entry(vcpu_e500, tlbsel, esel); break; } } @@ -857,8 +857,7 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb) | MAS0_NV(vcpu_e500->gtlb_nv[tlbsel]); vcpu_e500->mas1 = gtlbe->mas1; vcpu_e500->mas2 = gtlbe->mas2; - vcpu_e500->mas3 = gtlbe->mas3; - vcpu_e500->mas7 = gtlbe->mas7; + vcpu_e500->mas7_3 = gtlbe->mas7_3; } else { int victim; @@ -873,8 +872,7 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb) | (vcpu_e500->mas4 & MAS4_TSIZED(~0)); vcpu_e500->mas2 &= MAS2_EPN; vcpu_e500->mas2 |= vcpu_e500->mas4 & MAS2_ATTRIB_MASK; - vcpu_e500->mas3 &= MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3; - vcpu_e500->mas7 = 0; + vcpu_e500->mas7_3 &= MAS3_U0 | MAS3_U1 | MAS3_U2 | MAS3_U3; } kvmppc_set_exit_type(vcpu, EMULATED_TLBSX_EXITS); @@ -883,8 +881,8 @@ int kvmppc_e500_emul_tlbsx(struct kvm_vcpu *vcpu, int rb) /* sesel is index into the set, not the whole array */ static void write_stlbe(struct kvmppc_vcpu_e500 *vcpu_e500, - struct tlbe *gtlbe, - struct tlbe *stlbe, + struct kvm_book3e_206_tlb_entry *gtlbe, + struct kvm_book3e_206_tlb_entry *stlbe, int stlbsel, int sesel) { int stid; @@ -902,28 +900,27 @@ static void write_stlbe(struct kvmppc_vcpu_e500 *vcpu_e500, int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu) { struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); - struct tlbe *gtlbe; + struct kvm_book3e_206_tlb_entry *gtlbe; int tlbsel, esel; tlbsel = get_tlb_tlbsel(vcpu_e500); esel = get_tlb_esel(vcpu_e500, tlbsel); - gtlbe = &vcpu_e500->gtlb_arch[tlbsel][esel]; + gtlbe = get_entry(vcpu_e500, tlbsel, esel); if (get_tlb_v(gtlbe)) inval_gtlbe_on_host(vcpu_e500, tlbsel, esel); gtlbe->mas1 = vcpu_e500->mas1; gtlbe->mas2 = vcpu_e500->mas2; - gtlbe->mas3 = vcpu_e500->mas3; - gtlbe->mas7 = vcpu_e500->mas7; + gtlbe->mas7_3 = vcpu_e500->mas7_3; trace_kvm_gtlb_write(vcpu_e500->mas0, gtlbe->mas1, gtlbe->mas2, - gtlbe->mas3, gtlbe->mas7); + (u32)gtlbe->mas7_3, (u32)(gtlbe->mas7_3 >> 32)); /* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */ if (tlbe_is_host_safe(vcpu, gtlbe)) { - struct tlbe stlbe; + struct kvm_book3e_206_tlb_entry stlbe; int stlbsel, sesel; u64 eaddr; u64 raddr; @@ -996,9 +993,11 @@ gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int index, gva_t eaddr) { struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); - struct tlbe *gtlbe = - &vcpu_e500->gtlb_arch[tlbsel_of(index)][esel_of(index)]; - u64 pgmask = get_tlb_bytes(gtlbe) - 1; + struct kvm_book3e_206_tlb_entry *gtlbe; + u64 pgmask; + + gtlbe = get_entry(vcpu_e500, tlbsel_of(index), esel_of(index)); + pgmask = get_tlb_bytes(gtlbe) - 1; return get_tlb_raddr(gtlbe) | (eaddr & pgmask); } @@ -1012,12 +1011,12 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 eaddr, gpa_t gpaddr, { struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); struct tlbe_priv *priv; - struct tlbe *gtlbe, stlbe; + struct kvm_book3e_206_tlb_entry *gtlbe, stlbe; int tlbsel = tlbsel_of(index); int esel = esel_of(index); int stlbsel, sesel; - gtlbe = &vcpu_e500->gtlb_arch[tlbsel][esel]; + gtlbe = get_entry(vcpu_e500, tlbsel, esel); switch (tlbsel) { case 0: @@ -1073,25 +1072,174 @@ void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 pid) void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *vcpu_e500) { - struct tlbe *tlbe; + struct kvm_book3e_206_tlb_entry *tlbe; /* Insert large initial mapping for guest. */ - tlbe = &vcpu_e500->gtlb_arch[1][0]; + tlbe = get_entry(vcpu_e500, 1, 0); tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_256M); tlbe->mas2 = 0; - tlbe->mas3 = E500_TLB_SUPER_PERM_MASK; - tlbe->mas7 = 0; + tlbe->mas7_3 = E500_TLB_SUPER_PERM_MASK; /* 4K map for serial output. Used by kernel wrapper. */ - tlbe = &vcpu_e500->gtlb_arch[1][1]; + tlbe = get_entry(vcpu_e500, 1, 1); tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_4K); tlbe->mas2 = (0xe0004500 & 0xFFFFF000) | MAS2_I | MAS2_G; - tlbe->mas3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK; - tlbe->mas7 = 0; + tlbe->mas7_3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK; +} + +static void free_gtlb(struct kvmppc_vcpu_e500 *vcpu_e500) +{ + int i; + + clear_tlb_refs(vcpu_e500); + kfree(vcpu_e500->gtlb_priv[0]); + kfree(vcpu_e500->gtlb_priv[1]); + + if (vcpu_e500->shared_tlb_pages) { + vfree((void *)(round_down((uintptr_t)vcpu_e500->gtlb_arch, + PAGE_SIZE))); + + for (i = 0; i < vcpu_e500->num_shared_tlb_pages; i++) { + set_page_dirty_lock(vcpu_e500->shared_tlb_pages[i]); + put_page(vcpu_e500->shared_tlb_pages[i]); + } + + vcpu_e500->num_shared_tlb_pages = 0; + vcpu_e500->shared_tlb_pages = NULL; + } else { + kfree(vcpu_e500->gtlb_arch); + } + + vcpu_e500->gtlb_arch = NULL; +} + +int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu, + struct kvm_config_tlb *cfg) +{ + struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); + struct kvm_book3e_206_tlb_params params; + char *virt; + struct page **pages; + struct tlbe_priv *privs[2] = {}; + size_t array_len; + u32 sets; + int num_pages, ret, i; + + if (cfg->mmu_type != KVM_MMU_FSL_BOOKE_NOHV) + return -EINVAL; + + if (copy_from_user(¶ms, (void __user *)(uintptr_t)cfg->params, + sizeof(params))) + return -EFAULT; + + if (params.tlb_sizes[1] > 64) + return -EINVAL; + if (params.tlb_ways[1] != params.tlb_sizes[1]) + return -EINVAL; + if (params.tlb_sizes[2] != 0 || params.tlb_sizes[3] != 0) + return -EINVAL; + if (params.tlb_ways[2] != 0 || params.tlb_ways[3] != 0) + return -EINVAL; + + if (!is_power_of_2(params.tlb_ways[0])) + return -EINVAL; + + sets = params.tlb_sizes[0] >> ilog2(params.tlb_ways[0]); + if (!is_power_of_2(sets)) + return -EINVAL; + + array_len = params.tlb_sizes[0] + params.tlb_sizes[1]; + array_len *= sizeof(struct kvm_book3e_206_tlb_entry); + + if (cfg->array_len < array_len) + return -EINVAL; + + num_pages = DIV_ROUND_UP(cfg->array + array_len - 1, PAGE_SIZE) - + cfg->array / PAGE_SIZE; + pages = kmalloc(sizeof(struct page *) * num_pages, GFP_KERNEL); + if (!pages) + return -ENOMEM; + + ret = get_user_pages_fast(cfg->array, num_pages, 1, pages); + if (ret < 0) + goto err_pages; + + if (ret != num_pages) { + num_pages = ret; + ret = -EFAULT; + goto err_put_page; + } + + virt = vmap(pages, num_pages, VM_MAP, PAGE_KERNEL); + if (!virt) + goto err_put_page; + + privs[0] = kzalloc(sizeof(struct tlbe_priv) * params.tlb_sizes[0], + GFP_KERNEL); + privs[1] = kzalloc(sizeof(struct tlbe_priv) * params.tlb_sizes[1], + GFP_KERNEL); + + if (!privs[0] || !privs[1]) + goto err_put_page; + + free_gtlb(vcpu_e500); + + vcpu_e500->gtlb_priv[0] = privs[0]; + vcpu_e500->gtlb_priv[1] = privs[1]; + + vcpu_e500->gtlb_arch = (struct kvm_book3e_206_tlb_entry *) + (virt + (cfg->array & (PAGE_SIZE - 1))); + + vcpu_e500->gtlb_params[0].entries = params.tlb_sizes[0]; + vcpu_e500->gtlb_params[1].entries = params.tlb_sizes[1]; + + vcpu_e500->gtlb_offset[0] = 0; + vcpu_e500->gtlb_offset[1] = params.tlb_sizes[0]; + + vcpu_e500->tlb0cfg = mfspr(SPRN_TLB0CFG) & ~0xfffUL; + if (params.tlb_sizes[0] <= 2048) + vcpu_e500->tlb0cfg |= params.tlb_sizes[0]; + + vcpu_e500->tlb1cfg = mfspr(SPRN_TLB1CFG) & ~0xfffUL; + vcpu_e500->tlb1cfg |= params.tlb_sizes[1]; + + vcpu_e500->shared_tlb_pages = pages; + vcpu_e500->num_shared_tlb_pages = num_pages; + + vcpu_e500->gtlb_params[0].ways = params.tlb_ways[0]; + vcpu_e500->gtlb_params[0].sets = sets; + + vcpu_e500->gtlb_params[1].ways = params.tlb_sizes[1]; + vcpu_e500->gtlb_params[1].sets = 1; + + return 0; + +err_put_page: + kfree(privs[0]); + kfree(privs[1]); + + for (i = 0; i < num_pages; i++) + put_page(pages[i]); + +err_pages: + kfree(pages); + return ret; +} + +int kvm_vcpu_ioctl_dirty_tlb(struct kvm_vcpu *vcpu, + struct kvm_dirty_tlb *dirty) +{ + struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); + + clear_tlb_refs(vcpu_e500); + return 0; } int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500) { + int entry_size = sizeof(struct kvm_book3e_206_tlb_entry); + int entries = KVM_E500_TLB0_SIZE + KVM_E500_TLB1_SIZE; + host_tlb_params[0].entries = mfspr(SPRN_TLB0CFG) & TLBnCFG_N_ENTRY; host_tlb_params[1].entries = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; @@ -1124,17 +1272,22 @@ int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500) host_tlb_params[0].entries / host_tlb_params[0].ways; host_tlb_params[1].sets = 1; - vcpu_e500->gtlb_size[0] = KVM_E500_TLB0_SIZE; - vcpu_e500->gtlb_arch[0] = - kzalloc(sizeof(struct tlbe) * KVM_E500_TLB0_SIZE, GFP_KERNEL); - if (vcpu_e500->gtlb_arch[0] == NULL) - goto err; + vcpu_e500->gtlb_params[0].entries = KVM_E500_TLB0_SIZE; + vcpu_e500->gtlb_params[1].entries = KVM_E500_TLB1_SIZE; - vcpu_e500->gtlb_size[1] = KVM_E500_TLB1_SIZE; - vcpu_e500->gtlb_arch[1] = - kzalloc(sizeof(struct tlbe) * KVM_E500_TLB1_SIZE, GFP_KERNEL); - if (vcpu_e500->gtlb_arch[1] == NULL) - goto err; + vcpu_e500->gtlb_params[0].ways = KVM_E500_TLB0_WAY_NUM; + vcpu_e500->gtlb_params[0].sets = + KVM_E500_TLB0_SIZE / KVM_E500_TLB0_WAY_NUM; + + vcpu_e500->gtlb_params[1].ways = KVM_E500_TLB1_SIZE; + vcpu_e500->gtlb_params[1].sets = 1; + + vcpu_e500->gtlb_arch = kmalloc(entries * entry_size, GFP_KERNEL); + if (!vcpu_e500->gtlb_arch) + return -ENOMEM; + + vcpu_e500->gtlb_offset[0] = 0; + vcpu_e500->gtlb_offset[1] = KVM_E500_TLB0_SIZE; vcpu_e500->tlb_refs[0] = kzalloc(sizeof(struct tlbe_ref) * host_tlb_params[0].entries, @@ -1148,15 +1301,15 @@ int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500) if (!vcpu_e500->tlb_refs[1]) goto err; - vcpu_e500->gtlb_priv[0] = - kzalloc(sizeof(struct tlbe_ref) * vcpu_e500->gtlb_size[0], - GFP_KERNEL); + vcpu_e500->gtlb_priv[0] = kzalloc(sizeof(struct tlbe_ref) * + vcpu_e500->gtlb_params[0].entries, + GFP_KERNEL); if (!vcpu_e500->gtlb_priv[0]) goto err; - vcpu_e500->gtlb_priv[1] = - kzalloc(sizeof(struct tlbe_ref) * vcpu_e500->gtlb_size[1], - GFP_KERNEL); + vcpu_e500->gtlb_priv[1] = kzalloc(sizeof(struct tlbe_ref) * + vcpu_e500->gtlb_params[1].entries, + GFP_KERNEL); if (!vcpu_e500->gtlb_priv[1]) goto err; @@ -1165,32 +1318,24 @@ int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500) /* Init TLB configuration register */ vcpu_e500->tlb0cfg = mfspr(SPRN_TLB0CFG) & ~0xfffUL; - vcpu_e500->tlb0cfg |= vcpu_e500->gtlb_size[0]; + vcpu_e500->tlb0cfg |= vcpu_e500->gtlb_params[0].entries; vcpu_e500->tlb1cfg = mfspr(SPRN_TLB1CFG) & ~0xfffUL; - vcpu_e500->tlb1cfg |= vcpu_e500->gtlb_size[1]; + vcpu_e500->tlb1cfg |= vcpu_e500->gtlb_params[1].entries; return 0; err: + free_gtlb(vcpu_e500); kfree(vcpu_e500->tlb_refs[0]); kfree(vcpu_e500->tlb_refs[1]); - kfree(vcpu_e500->gtlb_priv[0]); - kfree(vcpu_e500->gtlb_priv[1]); - kfree(vcpu_e500->gtlb_arch[0]); - kfree(vcpu_e500->gtlb_arch[1]); return -1; } void kvmppc_e500_tlb_uninit(struct kvmppc_vcpu_e500 *vcpu_e500) { - clear_tlb_refs(vcpu_e500); - + free_gtlb(vcpu_e500); kvmppc_e500_id_table_free(vcpu_e500); kfree(vcpu_e500->tlb_refs[0]); kfree(vcpu_e500->tlb_refs[1]); - kfree(vcpu_e500->gtlb_priv[0]); - kfree(vcpu_e500->gtlb_priv[1]); - kfree(vcpu_e500->gtlb_arch[1]); - kfree(vcpu_e500->gtlb_arch[0]); } diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h index b587f691459..2c296407e75 100644 --- a/arch/powerpc/kvm/e500_tlb.h +++ b/arch/powerpc/kvm/e500_tlb.h @@ -20,13 +20,9 @@ #include #include -#define KVM_E500_TLB0_WAY_SIZE_BIT 7 /* Fixed */ -#define KVM_E500_TLB0_WAY_SIZE (1UL << KVM_E500_TLB0_WAY_SIZE_BIT) -#define KVM_E500_TLB0_WAY_SIZE_MASK (KVM_E500_TLB0_WAY_SIZE - 1) - -#define KVM_E500_TLB0_WAY_NUM_BIT 1 /* No greater than 7 */ -#define KVM_E500_TLB0_WAY_NUM (1UL << KVM_E500_TLB0_WAY_NUM_BIT) -#define KVM_E500_TLB0_WAY_NUM_MASK (KVM_E500_TLB0_WAY_NUM - 1) +/* This geometry is the legacy default -- can be overridden by userspace */ +#define KVM_E500_TLB0_WAY_SIZE 128 +#define KVM_E500_TLB0_WAY_NUM 2 #define KVM_E500_TLB0_SIZE (KVM_E500_TLB0_WAY_SIZE * KVM_E500_TLB0_WAY_NUM) #define KVM_E500_TLB1_SIZE 16 @@ -58,50 +54,54 @@ extern void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *); extern void kvmppc_e500_recalc_shadow_pid(struct kvmppc_vcpu_e500 *); /* TLB helper functions */ -static inline unsigned int get_tlb_size(const struct tlbe *tlbe) +static inline unsigned int +get_tlb_size(const struct kvm_book3e_206_tlb_entry *tlbe) { return (tlbe->mas1 >> 7) & 0x1f; } -static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe) +static inline gva_t get_tlb_eaddr(const struct kvm_book3e_206_tlb_entry *tlbe) { return tlbe->mas2 & 0xfffff000; } -static inline u64 get_tlb_bytes(const struct tlbe *tlbe) +static inline u64 get_tlb_bytes(const struct kvm_book3e_206_tlb_entry *tlbe) { unsigned int pgsize = get_tlb_size(tlbe); return 1ULL << 10 << pgsize; } -static inline gva_t get_tlb_end(const struct tlbe *tlbe) +static inline gva_t get_tlb_end(const struct kvm_book3e_206_tlb_entry *tlbe) { u64 bytes = get_tlb_bytes(tlbe); return get_tlb_eaddr(tlbe) + bytes - 1; } -static inline u64 get_tlb_raddr(const struct tlbe *tlbe) +static inline u64 get_tlb_raddr(const struct kvm_book3e_206_tlb_entry *tlbe) { - u64 rpn = tlbe->mas7; - return (rpn << 32) | (tlbe->mas3 & 0xfffff000); + return tlbe->mas7_3 & ~0xfffULL; } -static inline unsigned int get_tlb_tid(const struct tlbe *tlbe) +static inline unsigned int +get_tlb_tid(const struct kvm_book3e_206_tlb_entry *tlbe) { return (tlbe->mas1 >> 16) & 0xff; } -static inline unsigned int get_tlb_ts(const struct tlbe *tlbe) +static inline unsigned int +get_tlb_ts(const struct kvm_book3e_206_tlb_entry *tlbe) { return (tlbe->mas1 >> 12) & 0x1; } -static inline unsigned int get_tlb_v(const struct tlbe *tlbe) +static inline unsigned int +get_tlb_v(const struct kvm_book3e_206_tlb_entry *tlbe) { return (tlbe->mas1 >> 31) & 0x1; } -static inline unsigned int get_tlb_iprot(const struct tlbe *tlbe) +static inline unsigned int +get_tlb_iprot(const struct kvm_book3e_206_tlb_entry *tlbe) { return (tlbe->mas1 >> 30) & 0x1; } @@ -156,7 +156,7 @@ static inline unsigned int get_tlb_esel_bit( } static inline int tlbe_is_host_safe(const struct kvm_vcpu *vcpu, - const struct tlbe *tlbe) + const struct kvm_book3e_206_tlb_entry *tlbe) { gpa_t gpa; diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index a5671616af8..3cf6fba513a 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -222,6 +222,9 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PPC_PAIRED_SINGLES: case KVM_CAP_PPC_OSI: case KVM_CAP_PPC_GET_PVINFO: +#ifdef CONFIG_KVM_E500 + case KVM_CAP_SW_TLB: +#endif r = 1; break; case KVM_CAP_COALESCED_MMIO: @@ -602,6 +605,19 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, r = 0; vcpu->arch.papr_enabled = true; break; +#ifdef CONFIG_KVM_E500 + case KVM_CAP_SW_TLB: { + struct kvm_config_tlb cfg; + void __user *user_ptr = (void __user *)(uintptr_t)cap->args[0]; + + r = -EFAULT; + if (copy_from_user(&cfg, user_ptr, sizeof(cfg))) + break; + + r = kvm_vcpu_ioctl_config_tlb(vcpu, &cfg); + break; + } +#endif default: r = -EINVAL; break; @@ -651,6 +667,18 @@ long kvm_arch_vcpu_ioctl(struct file *filp, r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap); break; } + +#ifdef CONFIG_KVM_E500 + case KVM_DIRTY_TLB: { + struct kvm_dirty_tlb dirty; + r = -EFAULT; + if (copy_from_user(&dirty, argp, sizeof(dirty))) + goto out; + r = kvm_vcpu_ioctl_dirty_tlb(vcpu, &dirty); + break; + } +#endif + default: r = -EINVAL; } diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 245bcb3a0fc..fa029ced4bd 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -581,6 +581,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_RMA 65 #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ #define KVM_CAP_PPC_PAPR 68 +#define KVM_CAP_SW_TLB 69 #define KVM_CAP_S390_GMAP 71 #define KVM_CAP_TSC_DEADLINE_TIMER 72 #define KVM_CAP_S390_UCONTROL 73 @@ -664,6 +665,21 @@ struct kvm_clock_data { __u32 pad[9]; }; +#define KVM_MMU_FSL_BOOKE_NOHV 0 +#define KVM_MMU_FSL_BOOKE_HV 1 + +struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; +}; + +struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; +}; + /* * ioctls for VM fds */ @@ -801,6 +817,8 @@ struct kvm_s390_ucas_mapping { #define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) /* Available with KVM_CAP_RMA */ #define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_SW_TLB */ +#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) -- cgit v1.2.3-70-g09d2 From a355aa54f1d25dff83c0feef8863d83a76988fdb Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 12 Dec 2011 12:37:21 +0000 Subject: KVM: Add barriers to allow mmu_notifier_retry to be used locklessly This adds an smp_wmb in kvm_mmu_notifier_invalidate_range_end() and an smp_rmb in mmu_notifier_retry() so that mmu_notifier_retry() will give the correct answer when called without kvm->mmu_lock being held. PowerPC Book3S HV KVM wants to use a bitlock per guest page rather than a single global spinlock in order to improve the scalability of updates to the guest MMU hashed page table, and so needs this. Signed-off-by: Paul Mackerras Acked-by: Avi Kivity Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 14 +++++++++----- virt/kvm/kvm_main.c | 6 +++--- 2 files changed, 12 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index d4d4d709211..eada8e69fe5 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -702,12 +702,16 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se if (unlikely(vcpu->kvm->mmu_notifier_count)) return 1; /* - * Both reads happen under the mmu_lock and both values are - * modified under mmu_lock, so there's no need of smb_rmb() - * here in between, otherwise mmu_notifier_count should be - * read before mmu_notifier_seq, see - * mmu_notifier_invalidate_range_end write side. + * Ensure the read of mmu_notifier_count happens before the read + * of mmu_notifier_seq. This interacts with the smp_wmb() in + * mmu_notifier_invalidate_range_end to make sure that the caller + * either sees the old (non-zero) value of mmu_notifier_count or + * the new (incremented) value of mmu_notifier_seq. + * PowerPC Book3s HV KVM calls this under a per-page lock + * rather than under kvm->mmu_lock, for scalability, so + * can't rely on kvm->mmu_lock to keep things ordered. */ + smp_rmb(); if (vcpu->kvm->mmu_notifier_seq != mmu_seq) return 1; return 0; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 64be836f334..9f32bffd37c 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -357,11 +357,11 @@ static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn, * been freed. */ kvm->mmu_notifier_seq++; + smp_wmb(); /* * The above sequence increase must be visible before the - * below count decrease but both values are read by the kvm - * page fault under mmu_lock spinlock so we don't need to add - * a smb_wmb() here in between the two. + * below count decrease, which is ensured by the smp_wmb above + * in conjunction with the smp_rmb in mmu_notifier_retry(). */ kvm->mmu_notifier_count--; spin_unlock(&kvm->mmu_lock); -- cgit v1.2.3-70-g09d2 From e24ed81fedd551e80378be62fa0b0532480ea7d4 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Wed, 14 Sep 2011 10:02:41 +0200 Subject: KVM: PPC: Add generic single register ioctls Right now we transfer a static struct every time we want to get or set registers. Unfortunately, over time we realize that there are more of these than we thought of before and the extensibility and flexibility of transferring a full struct every time is limited. So this is a new approach to the problem. With these new ioctls, we can get and set a single register that is identified by an ID. This allows for very precise and limited transmittal of data. When we later realize that it's a better idea to shove over multiple registers at once, we can reuse most of the infrastructure and simply implement a GET_MANY_REGS / SET_MANY_REGS interface. Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 46 ++++++++++++++++++++++++++++++++++++--- arch/powerpc/kvm/powerpc.c | 41 ++++++++++++++++++++++++++++++++++ include/linux/kvm.h | 35 +++++++++++++++++++++++++++++ 3 files changed, 119 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index bcd45d5afca..e0c75dcb2ca 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1533,7 +1533,7 @@ following algorithm: Some guests configure the LINT1 NMI input to cause a panic, aiding in debugging. -4.64 KVM_S390_UCAS_MAP +4.65 KVM_S390_UCAS_MAP Capability: KVM_CAP_S390_UCONTROL Architectures: s390 @@ -1552,7 +1552,7 @@ This ioctl maps the memory at "user_addr" with the length "length" to the vcpu's address space starting at "vcpu_addr". All parameters need to be alligned by 1 megabyte. -4.65 KVM_S390_UCAS_UNMAP +4.66 KVM_S390_UCAS_UNMAP Capability: KVM_CAP_S390_UCONTROL Architectures: s390 @@ -1571,7 +1571,7 @@ This ioctl unmaps the memory in the vcpu's address space starting at "vcpu_addr" with the length "length". The field "user_addr" is ignored. All parameters need to be alligned by 1 megabyte. -4.66 KVM_S390_VCPU_FAULT +4.67 KVM_S390_VCPU_FAULT Capability: KVM_CAP_S390_UCONTROL Architectures: s390 @@ -1587,6 +1587,46 @@ table upfront. This is useful to handle validity intercepts for user controlled virtual machines to fault in the virtual cpu's lowcore pages prior to calling the KVM_RUN ioctl. +4.68 KVM_SET_ONE_REG + +Capability: KVM_CAP_ONE_REG +Architectures: all +Type: vcpu ioctl +Parameters: struct kvm_one_reg (in) +Returns: 0 on success, negative value on failure + +struct kvm_one_reg { + __u64 id; + __u64 addr; +}; + +Using this ioctl, a single vcpu register can be set to a specific value +defined by user space with the passed in struct kvm_one_reg, where id +refers to the register identifier as described below and addr is a pointer +to a variable with the respective size. There can be architecture agnostic +and architecture specific registers. Each have their own range of operation +and their own constants and width. To keep track of the implemented +registers, find a list below: + + Arch | Register | Width (bits) + | | + +4.69 KVM_GET_ONE_REG + +Capability: KVM_CAP_ONE_REG +Architectures: all +Type: vcpu ioctl +Parameters: struct kvm_one_reg (in and out) +Returns: 0 on success, negative value on failure + +This ioctl allows to receive the value of a single register implemented +in a vcpu. The register to read is indicated by the "id" field of the +kvm_one_reg struct passed in. On success, the register value can be found +at the memory location pointed to by "addr". + +The list of registers accessible using this interface is identical to the +list in 4.64. + 5. The kvm_run structure Application code obtains a pointer to the kvm_run structure by diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index f4380cb264e..089c61bf0e1 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -217,6 +217,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PPC_UNSET_IRQ: case KVM_CAP_PPC_IRQ_LEVEL: case KVM_CAP_ENABLE_CAP: + case KVM_CAP_ONE_REG: r = 1; break; #ifndef CONFIG_KVM_BOOK3S_64_HV @@ -645,6 +646,32 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, return r; } +static int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, + struct kvm_one_reg *reg) +{ + int r = -EINVAL; + + switch (reg->id) { + default: + break; + } + + return r; +} + +static int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, + struct kvm_one_reg *reg) +{ + int r = -EINVAL; + + switch (reg->id) { + default: + break; + } + + return r; +} + int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { @@ -684,6 +711,20 @@ long kvm_arch_vcpu_ioctl(struct file *filp, break; } + case KVM_SET_ONE_REG: + case KVM_GET_ONE_REG: + { + struct kvm_one_reg reg; + r = -EFAULT; + if (copy_from_user(®, argp, sizeof(reg))) + goto out; + if (ioctl == KVM_SET_ONE_REG) + r = kvm_vcpu_ioctl_set_one_reg(vcpu, ®); + else + r = kvm_vcpu_ioctl_get_one_reg(vcpu, ®); + break; + } + #ifdef CONFIG_KVM_E500 case KVM_DIRTY_TLB: { struct kvm_dirty_tlb dirty; diff --git a/include/linux/kvm.h b/include/linux/kvm.h index fa029ced4bd..4f7a9fb8ab0 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -582,6 +582,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ #define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_SW_TLB 69 +#define KVM_CAP_ONE_REG 70 #define KVM_CAP_S390_GMAP 71 #define KVM_CAP_TSC_DEADLINE_TIMER 72 #define KVM_CAP_S390_UCONTROL 73 @@ -680,6 +681,37 @@ struct kvm_dirty_tlb { __u32 num_dirty; }; +/* Available with KVM_CAP_ONE_REG */ + +#define KVM_REG_ARCH_MASK 0xff00000000000000ULL +#define KVM_REG_GENERIC 0x0000000000000000ULL + +/* + * Architecture specific registers are to be defined in arch headers and + * ORed with the arch identifier. + */ +#define KVM_REG_PPC 0x1000000000000000ULL +#define KVM_REG_X86 0x2000000000000000ULL +#define KVM_REG_IA64 0x3000000000000000ULL +#define KVM_REG_ARM 0x4000000000000000ULL +#define KVM_REG_S390 0x5000000000000000ULL + +#define KVM_REG_SIZE_SHIFT 52 +#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL +#define KVM_REG_SIZE_U8 0x0000000000000000ULL +#define KVM_REG_SIZE_U16 0x0010000000000000ULL +#define KVM_REG_SIZE_U32 0x0020000000000000ULL +#define KVM_REG_SIZE_U64 0x0030000000000000ULL +#define KVM_REG_SIZE_U128 0x0040000000000000ULL +#define KVM_REG_SIZE_U256 0x0050000000000000ULL +#define KVM_REG_SIZE_U512 0x0060000000000000ULL +#define KVM_REG_SIZE_U1024 0x0070000000000000ULL + +struct kvm_one_reg { + __u64 id; + __u64 addr; +}; + /* * ioctls for VM fds */ @@ -819,6 +851,9 @@ struct kvm_s390_ucas_mapping { #define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) /* Available with KVM_CAP_SW_TLB */ #define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) +/* Available with KVM_CAP_ONE_REG */ +#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg) +#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) -- cgit v1.2.3-70-g09d2 From 1022fc3d3bfaca09d5d6bfcc93a168de16840814 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Wed, 14 Sep 2011 21:45:23 +0200 Subject: KVM: PPC: Add support for explicit HIOR setting Until now, we always set HIOR based on the PVR, but this is just wrong. Instead, we should be setting HIOR explicitly, so user space can decide what the initial HIOR value is - just like on real hardware. We keep the old PVR based way around for backwards compatibility, but once user space uses the SET_ONE_REG based method, we drop the PVR logic. Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 1 + arch/powerpc/include/asm/kvm.h | 2 ++ arch/powerpc/include/asm/kvm_book3s.h | 2 ++ arch/powerpc/kvm/book3s_pr.c | 6 ++++-- arch/powerpc/kvm/powerpc.c | 13 +++++++++++++ include/linux/kvm.h | 1 + 6 files changed, 23 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index e0c75dcb2ca..59a38264a0e 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1610,6 +1610,7 @@ registers, find a list below: Arch | Register | Width (bits) | | + PPC | KVM_REG_PPC_HIOR | 64 4.69 KVM_GET_ONE_REG diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index 663c57f8716..f41adcda146 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -331,4 +331,6 @@ struct kvm_book3e_206_tlb_params { __u32 reserved[8]; }; +#define KVM_REG_PPC_HIOR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0x1) + #endif /* __LINUX_KVM_POWERPC_H */ diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index 3c3edee672a..aa795ccef29 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -90,6 +90,8 @@ struct kvmppc_vcpu_book3s { #endif int context_id[SID_CONTEXTS]; + bool hior_explicit; /* HIOR is set by ioctl, not PVR */ + struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE]; struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG]; struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE]; diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index c193625d528..00efda6dc0e 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -157,14 +157,16 @@ void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr) #ifdef CONFIG_PPC_BOOK3S_64 if ((pvr >= 0x330000) && (pvr < 0x70330000)) { kvmppc_mmu_book3s_64_init(vcpu); - to_book3s(vcpu)->hior = 0xfff00000; + if (!to_book3s(vcpu)->hior_explicit) + to_book3s(vcpu)->hior = 0xfff00000; to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL; vcpu->arch.cpu_type = KVM_CPU_3S_64; } else #endif { kvmppc_mmu_book3s_32_init(vcpu); - to_book3s(vcpu)->hior = 0; + if (!to_book3s(vcpu)->hior_explicit) + to_book3s(vcpu)->hior = 0; to_book3s(vcpu)->msr_mask = 0xffffffffULL; vcpu->arch.cpu_type = KVM_CPU_3S_32; } diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 089c61bf0e1..59852091b38 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -212,6 +212,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PPC_BOOKE_SREGS: #else case KVM_CAP_PPC_SEGSTATE: + case KVM_CAP_PPC_HIOR: case KVM_CAP_PPC_PAPR: #endif case KVM_CAP_PPC_UNSET_IRQ: @@ -652,6 +653,11 @@ static int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, int r = -EINVAL; switch (reg->id) { +#ifdef CONFIG_PPC_BOOK3S + case KVM_REG_PPC_HIOR: + r = put_user(to_book3s(vcpu)->hior, (u64 __user *)reg->addr); + break; +#endif default: break; } @@ -665,6 +671,13 @@ static int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, int r = -EINVAL; switch (reg->id) { +#ifdef CONFIG_PPC_BOOK3S + case KVM_ONE_REG_PPC_HIOR: + r = get_user(to_book3s(vcpu)->hior, (u64 __user *)reg->addr); + if (!r) + to_book3s(vcpu)->hior_explicit = true; + break; +#endif default: break; } diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 4f7a9fb8ab0..acbe4293908 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -580,6 +580,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 #define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ +#define KVM_CAP_PPC_HIOR 67 #define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_SW_TLB 69 #define KVM_CAP_ONE_REG 70 -- cgit v1.2.3-70-g09d2 From 9d4cba7f93c52d4121ab9c6f289e582d368a6979 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 12 Jan 2012 20:09:51 +0000 Subject: KVM: Move gfn_to_memslot() to kvm_host.h This moves __gfn_to_memslot() and search_memslots() from kvm_main.c to kvm_host.h to reduce the code duplication caused by the need for non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c to call gfn_to_memslot() in real mode. Rather than putting gfn_to_memslot() itself in a header, which would lead to increased code size, this puts __gfn_to_memslot() in a header. Then, the non-modular uses of gfn_to_memslot() are changed to call __gfn_to_memslot() instead. This way there is only one place in the source code that needs to be changed should the gfn_to_memslot() implementation need to be modified. On powerpc, the Book3S HV style of KVM has code that is called from real mode which needs to call gfn_to_memslot() and thus needs this. (Module code is allocated in the vmalloc region, which can't be accessed in real mode.) With this, we can remove builtin_gfn_to_memslot() from book3s_hv_rm_mmu.c. Signed-off-by: Paul Mackerras Acked-by: Avi Kivity Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- arch/powerpc/kvm/book3s_hv_rm_mmu.c | 23 ++--------------------- include/linux/kvm_host.h | 25 +++++++++++++++++++++++++ virt/kvm/kvm_main.c | 21 +-------------------- 3 files changed, 28 insertions(+), 41 deletions(-) (limited to 'include/linux') diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index 5f3c60b89fa..def880aea63 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -21,25 +21,6 @@ #include #include -/* - * Since this file is built in even if KVM is a module, we need - * a local copy of this function for the case where kvm_main.c is - * modular. - */ -static struct kvm_memory_slot *builtin_gfn_to_memslot(struct kvm *kvm, - gfn_t gfn) -{ - struct kvm_memslots *slots; - struct kvm_memory_slot *memslot; - - slots = kvm_memslots(kvm); - kvm_for_each_memslot(memslot, slots) - if (gfn >= memslot->base_gfn && - gfn < memslot->base_gfn + memslot->npages) - return memslot; - return NULL; -} - /* Translate address of a vmalloc'd thing to a linear map address */ static void *real_vmalloc_addr(void *x) { @@ -99,7 +80,7 @@ static void remove_revmap_chain(struct kvm *kvm, long pte_index, rcbits = hpte_r & (HPTE_R_R | HPTE_R_C); ptel = rev->guest_rpte |= rcbits; gfn = hpte_rpn(ptel, hpte_page_size(hpte_v, ptel)); - memslot = builtin_gfn_to_memslot(kvm, gfn); + memslot = __gfn_to_memslot(kvm_memslots(kvm), gfn); if (!memslot || (memslot->flags & KVM_MEMSLOT_INVALID)) return; @@ -181,7 +162,7 @@ long kvmppc_h_enter(struct kvm_vcpu *vcpu, unsigned long flags, /* Find the memslot (if any) for this address */ gpa = (ptel & HPTE_R_RPN) & ~(psize - 1); gfn = gpa >> PAGE_SHIFT; - memslot = builtin_gfn_to_memslot(kvm, gfn); + memslot = __gfn_to_memslot(kvm_memslots(kvm), gfn); pa = 0; is_io = ~0ul; rmap = NULL; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index eada8e69fe5..9698080c902 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -651,6 +651,31 @@ static inline void kvm_guest_exit(void) current->flags &= ~PF_VCPU; } +/* + * search_memslots() and __gfn_to_memslot() are here because they are + * used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c. + * gfn_to_memslot() itself isn't here as an inline because that would + * bloat other code too much. + */ +static inline struct kvm_memory_slot * +search_memslots(struct kvm_memslots *slots, gfn_t gfn) +{ + struct kvm_memory_slot *memslot; + + kvm_for_each_memslot(memslot, slots) + if (gfn >= memslot->base_gfn && + gfn < memslot->base_gfn + memslot->npages) + return memslot; + + return NULL; +} + +static inline struct kvm_memory_slot * +__gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn) +{ + return search_memslots(slots, gfn); +} + static inline int memslot_id(struct kvm *kvm, gfn_t gfn) { return gfn_to_memslot(kvm, gfn)->id; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 9f32bffd37c..470e30520fe 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -640,19 +640,6 @@ static int kvm_create_dirty_bitmap(struct kvm_memory_slot *memslot) } #endif /* !CONFIG_S390 */ -static struct kvm_memory_slot * -search_memslots(struct kvm_memslots *slots, gfn_t gfn) -{ - struct kvm_memory_slot *memslot; - - kvm_for_each_memslot(memslot, slots) - if (gfn >= memslot->base_gfn && - gfn < memslot->base_gfn + memslot->npages) - return memslot; - - return NULL; -} - static int cmp_memslot(const void *slot1, const void *slot2) { struct kvm_memory_slot *s1, *s2; @@ -1031,12 +1018,6 @@ int kvm_is_error_hva(unsigned long addr) } EXPORT_SYMBOL_GPL(kvm_is_error_hva); -static struct kvm_memory_slot *__gfn_to_memslot(struct kvm_memslots *slots, - gfn_t gfn) -{ - return search_memslots(slots, gfn); -} - struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn) { return __gfn_to_memslot(kvm_memslots(kvm), gfn); @@ -1459,7 +1440,7 @@ int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc, ghc->gpa = gpa; ghc->generation = slots->generation; - ghc->memslot = __gfn_to_memslot(slots, gfn); + ghc->memslot = gfn_to_memslot(kvm, gfn); ghc->hva = gfn_to_hva_many(ghc->memslot, gfn, NULL); if (!kvm_is_error_hva(ghc->hva)) ghc->hva += offset; -- cgit v1.2.3-70-g09d2 From aca5ce14eb773a75e5d935968b2e390dc5bd29c3 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 17 Feb 2012 20:26:21 +0530 Subject: gpio: gpiolib: Support for open drain/collector gpios Adding support for the open drain gpio on which client can specify the open drain property through GPIO flag GPIOF_OPEN_DRAIN at the time of gpio request. The open drain pins are normally pulled high and it cannot be driven to output with value of 1 and so when client request for setting the pin to HIGH, the gpio will be set to input direction to make pin in tristate and hence PULL-UP on pins will make the state to HIGH. The open drain pin can be driven to LOW by setting output with value of 0. Signed-off-by: Laxman Dewangan Reviwed-by: Mark Brown Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/gpio/gpiolib.c | 44 ++++++++++++++++++++++++++++++++++++++++++-- include/linux/gpio.h | 3 +++ 2 files changed, 45 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index e633a2afbe9..5d25a33d535 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -58,6 +58,7 @@ struct gpio_desc { #define FLAG_TRIG_FALL 5 /* trigger on falling edge */ #define FLAG_TRIG_RISE 6 /* trigger on rising edge */ #define FLAG_ACTIVE_LOW 7 /* sysfs value has active low */ +#define FLAG_OPEN_DRAIN 8 /* Gpio is open drain type */ #define ID_SHIFT 16 /* add new flags before this one */ @@ -1264,6 +1265,7 @@ void gpio_free(unsigned gpio) module_put(desc->chip->owner); clear_bit(FLAG_ACTIVE_LOW, &desc->flags); clear_bit(FLAG_REQUESTED, &desc->flags); + clear_bit(FLAG_OPEN_DRAIN, &desc->flags); } else WARN_ON(extra_checks); @@ -1285,6 +1287,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) if (err) return err; + if (flags & GPIOF_OPEN_DRAIN) + set_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags); + if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else @@ -1434,6 +1439,10 @@ int gpio_direction_output(unsigned gpio, int value) struct gpio_desc *desc = &gpio_desc[gpio]; int status = -EINVAL; + /* Open drain pin should not be driven to 1 */ + if (value && test_bit(FLAG_OPEN_DRAIN, &desc->flags)) + return gpio_direction_input(gpio); + spin_lock_irqsave(&gpio_lock, flags); if (!gpio_is_valid(gpio)) @@ -1570,6 +1579,31 @@ int __gpio_get_value(unsigned gpio) } EXPORT_SYMBOL_GPL(__gpio_get_value); +/* + * _gpio_set_open_drain_value() - Set the open drain gpio's value. + * @gpio: Gpio whose state need to be set. + * @chip: Gpio chip. + * @value: Non-zero for setting it HIGH otherise it will set to LOW. + */ +static void _gpio_set_open_drain_value(unsigned gpio, + struct gpio_chip *chip, int value) +{ + int err = 0; + if (value) { + err = chip->direction_input(chip, gpio - chip->base); + if (!err) + clear_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } else { + err = chip->direction_output(chip, gpio - chip->base, 0); + if (!err) + set_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } + trace_gpio_direction(gpio, value, err); + if (err < 0) + pr_err("%s: Error in set_value for open drain gpio%d err %d\n", + __func__, gpio, err); +} + /** * __gpio_set_value() - assign a gpio's value * @gpio: gpio whose value will be assigned @@ -1586,7 +1620,10 @@ void __gpio_set_value(unsigned gpio, int value) chip = gpio_to_chip(gpio); WARN_ON(chip->can_sleep); trace_gpio_value(gpio, 0, value); - chip->set(chip, gpio - chip->base, value); + if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags)) + _gpio_set_open_drain_value(gpio, chip, value); + else + chip->set(chip, gpio - chip->base, value); } EXPORT_SYMBOL_GPL(__gpio_set_value); @@ -1653,7 +1690,10 @@ void gpio_set_value_cansleep(unsigned gpio, int value) might_sleep_if(extra_checks); chip = gpio_to_chip(gpio); trace_gpio_value(gpio, 0, value); - chip->set(chip, gpio - chip->base, value); + if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags)) + _gpio_set_open_drain_value(gpio, chip, value); + else + chip->set(chip, gpio - chip->base, value); } EXPORT_SYMBOL_GPL(gpio_set_value_cansleep); diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 38ac48b7d3a..66a5b2e9d35 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -14,6 +14,9 @@ #define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) +/* Gpio pin is open drain */ +#define GPIOF_OPEN_DRAIN (1 << 2) + /** * struct gpio - a structure describing a GPIO with configuration * @gpio: the GPIO number -- cgit v1.2.3-70-g09d2 From 25553ff0756c59b617af6bdd280c94e943164184 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 17 Feb 2012 20:26:22 +0530 Subject: gpio: gpiolib: Support for open source/emitter gpios Adding support for the open source gpio on which client can specify the open source property through GPIO flag GPIOF_OPEN_SOURCE at the time of gpio request. The open source pins are normally pulled low and it cannot be driven to output with value of 0 and so when client request for setting the pin to LOW, the gpio will be set to input direction to make pin in tristate and hence PULL-DOWN on pins will make the state to LOW. The open source pin can be driven to HIGH by setting output with value of 1. Signed-off-by: Laxman Dewangan Reviwed-by: Mark Brown Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/gpio/gpiolib.c | 39 +++++++++++++++++++++++++++++++++++++++ include/linux/gpio.h | 3 +++ 2 files changed, 42 insertions(+) (limited to 'include/linux') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 5d25a33d535..58f40dfc526 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -59,6 +59,7 @@ struct gpio_desc { #define FLAG_TRIG_RISE 6 /* trigger on rising edge */ #define FLAG_ACTIVE_LOW 7 /* sysfs value has active low */ #define FLAG_OPEN_DRAIN 8 /* Gpio is open drain type */ +#define FLAG_OPEN_SOURCE 9 /* Gpio is open source type */ #define ID_SHIFT 16 /* add new flags before this one */ @@ -1266,6 +1267,7 @@ void gpio_free(unsigned gpio) clear_bit(FLAG_ACTIVE_LOW, &desc->flags); clear_bit(FLAG_REQUESTED, &desc->flags); clear_bit(FLAG_OPEN_DRAIN, &desc->flags); + clear_bit(FLAG_OPEN_SOURCE, &desc->flags); } else WARN_ON(extra_checks); @@ -1290,6 +1292,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) if (flags & GPIOF_OPEN_DRAIN) set_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags); + if (flags & GPIOF_OPEN_SOURCE) + set_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags); + if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else @@ -1443,6 +1448,10 @@ int gpio_direction_output(unsigned gpio, int value) if (value && test_bit(FLAG_OPEN_DRAIN, &desc->flags)) return gpio_direction_input(gpio); + /* Open source pin should not be driven to 0 */ + if (!value && test_bit(FLAG_OPEN_SOURCE, &desc->flags)) + return gpio_direction_input(gpio); + spin_lock_irqsave(&gpio_lock, flags); if (!gpio_is_valid(gpio)) @@ -1604,6 +1613,32 @@ static void _gpio_set_open_drain_value(unsigned gpio, __func__, gpio, err); } +/* + * _gpio_set_open_source() - Set the open source gpio's value. + * @gpio: Gpio whose state need to be set. + * @chip: Gpio chip. + * @value: Non-zero for setting it HIGH otherise it will set to LOW. + */ +static void _gpio_set_open_source_value(unsigned gpio, + struct gpio_chip *chip, int value) +{ + int err = 0; + if (value) { + err = chip->direction_output(chip, gpio - chip->base, 1); + if (!err) + set_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } else { + err = chip->direction_input(chip, gpio - chip->base); + if (!err) + clear_bit(FLAG_IS_OUT, &gpio_desc[gpio].flags); + } + trace_gpio_direction(gpio, !value, err); + if (err < 0) + pr_err("%s: Error in set_value for open source gpio%d err %d\n", + __func__, gpio, err); +} + + /** * __gpio_set_value() - assign a gpio's value * @gpio: gpio whose value will be assigned @@ -1622,6 +1657,8 @@ void __gpio_set_value(unsigned gpio, int value) trace_gpio_value(gpio, 0, value); if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags)) _gpio_set_open_drain_value(gpio, chip, value); + else if (test_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags)) + _gpio_set_open_source_value(gpio, chip, value); else chip->set(chip, gpio - chip->base, value); } @@ -1692,6 +1729,8 @@ void gpio_set_value_cansleep(unsigned gpio, int value) trace_gpio_value(gpio, 0, value); if (test_bit(FLAG_OPEN_DRAIN, &gpio_desc[gpio].flags)) _gpio_set_open_drain_value(gpio, chip, value); + else if (test_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags)) + _gpio_set_open_source_value(gpio, chip, value); else chip->set(chip, gpio - chip->base, value); } diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 66a5b2e9d35..67851bbd3a4 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -17,6 +17,9 @@ /* Gpio pin is open drain */ #define GPIOF_OPEN_DRAIN (1 << 2) +/* Gpio pin is open source */ +#define GPIOF_OPEN_SOURCE (1 << 3) + /** * struct gpio - a structure describing a GPIO with configuration * @gpio: the GPIO number -- cgit v1.2.3-70-g09d2 From a8203725dfded5c1f79dca3368a4a273e24b59bb Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 5 Mar 2012 15:14:41 -0800 Subject: slab: introduce kmalloc_array() Introduce a kmalloc_array() wrapper that performs integer overflow checking without zeroing the memory. Suggested-by: Andrew Morton Suggested-by: Jens Axboe Signed-off-by: Xi Wang Cc: Dan Carpenter Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Pekka Enberg --- include/linux/slab.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 573c809c33d..a595dce6b0c 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -190,7 +190,7 @@ size_t ksize(const void *); #endif /** - * kcalloc - allocate memory for an array. The memory is set to zero. + * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. * @flags: the type of memory to allocate. @@ -240,11 +240,22 @@ size_t ksize(const void *); * for general use, and so are not documented here. For a full list of * potential flags, always refer to linux/gfp.h. */ -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +static inline void *kmalloc_array(size_t n, size_t size, gfp_t flags) { if (size != 0 && n > ULONG_MAX / size) return NULL; - return __kmalloc(n * size, flags | __GFP_ZERO); + return __kmalloc(n * size, flags); +} + +/** + * kcalloc - allocate memory for an array. The memory is set to zero. + * @n: number of elements. + * @size: element size. + * @flags: the type of memory to allocate (see kmalloc). + */ +static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +{ + return kmalloc_array(n, size, flags | __GFP_ZERO); } #if !defined(CONFIG_NUMA) && !defined(CONFIG_SLOB) -- cgit v1.2.3-70-g09d2 From d48f411c10f2badaf88e6050cd3d3acd52197356 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Wed, 11 Jan 2012 16:11:41 +0530 Subject: mfd: Add new mfd device for TPS65217 The TPS65217 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators - White LED - USB battery charger This patch adds support for tps65217 mfd device. At this time only the regulator functionality is made available. Signed-off-by: AnilKumar Ch Reviwed-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 15 +++ drivers/mfd/Makefile | 1 + drivers/mfd/tps65217.c | 242 ++++++++++++++++++++++++++++++++++++ include/linux/mfd/tps65217.h | 283 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 541 insertions(+) create mode 100644 drivers/mfd/tps65217.c create mode 100644 include/linux/mfd/tps65217.h (limited to 'include/linux') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index f147395bac9..c559d352c42 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -143,6 +143,21 @@ config TPS6507X This driver can also be built as a module. If so, the module will be called tps6507x. +config MFD_TPS65217 + tristate "TPS65217 Power Management / White LED chips" + depends on I2C + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65217 series of + Power Management / White LED chips. + These include voltage regulators, lithium ion/polymer battery + charger, wled and other features that are often used in portable + devices. + + This driver can also be built as a module. If so, the module + will be called tps65217. + config MFD_TPS6586X bool "TPS6586x Power Management chips" depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b953bab934f..27430d3e839 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o +obj-$(CONFIG_MFD_TPS65217) += tps65217.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o tps65912-objs := tps65912-core.o tps65912-irq.o obj-$(CONFIG_MFD_TPS65912) += tps65912.o diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c new file mode 100644 index 00000000000..f7d854e4cc6 --- /dev/null +++ b/drivers/mfd/tps65217.c @@ -0,0 +1,242 @@ +/* + * tps65217.c + * + * TPS65217 chip family multi-function driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/** + * tps65217_reg_read: Read a single tps65217 register. + * + * @tps: Device to read from. + * @reg: Register to read. + * @val: Contians the value + */ +int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, + unsigned int *val) +{ + return regmap_read(tps->regmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65217_reg_read); + +/** + * tps65217_reg_write: Write a single tps65217 register. + * + * @tps65217: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + * @level: Password protected level + */ +int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, + unsigned int val, unsigned int level) +{ + int ret; + unsigned int xor_reg_val; + + switch (level) { + case TPS65217_PROTECT_NONE: + return regmap_write(tps->regmap, reg, val); + case TPS65217_PROTECT_L1: + xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + + return regmap_write(tps->regmap, reg, val); + case TPS65217_PROTECT_L2: + xor_reg_val = reg ^ TPS65217_PASSWORD_REGS_UNLOCK; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + ret = regmap_write(tps->regmap, reg, val); + if (ret < 0) + return ret; + ret = regmap_write(tps->regmap, TPS65217_REG_PASSWORD, + xor_reg_val); + if (ret < 0) + return ret; + return regmap_write(tps->regmap, reg, val); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(tps65217_reg_write); + +/** + * tps65217_update_bits: Modify bits w.r.t mask, val and level. + * + * @tps65217: Device to write to. + * @reg: Register to read-write to. + * @mask: Mask. + * @val: Value to write. + * @level: Password protected level + */ +int tps65217_update_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + int ret; + unsigned int data; + + ret = tps65217_reg_read(tps, reg, &data); + if (ret) { + dev_err(tps->dev, "Read from reg 0x%x failed\n", reg); + return ret; + } + + data &= ~mask; + data |= val & mask; + + ret = tps65217_reg_write(tps, reg, data, level); + if (ret) + dev_err(tps->dev, "Write for reg 0x%x failed\n", reg); + + return ret; +} + +int tps65217_set_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level) +{ + return tps65217_update_bits(tps, reg, mask, val, level); +} +EXPORT_SYMBOL_GPL(tps65217_set_bits); + +int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int level) +{ + return tps65217_update_bits(tps, reg, mask, 0, level); +} +EXPORT_SYMBOL_GPL(tps65217_clear_bits); + +static struct regmap_config tps65217_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit tps65217_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct tps65217 *tps; + struct tps65217_board *pdata = client->dev.platform_data; + int i, ret; + unsigned int version; + + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); + if (!tps) + return -ENOMEM; + + tps->pdata = pdata; + tps->regmap = regmap_init_i2c(client, &tps65217_regmap_config); + if (IS_ERR(tps->regmap)) { + ret = PTR_ERR(tps->regmap); + dev_err(tps->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + + ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version); + if (ret < 0) { + dev_err(tps->dev, "Failed to read revision" + " register: %d\n", ret); + goto err_regmap; + } + + dev_info(tps->dev, "TPS65217 ID %#x version 1.%d\n", + (version & TPS65217_CHIPID_CHIP_MASK) >> 4, + version & TPS65217_CHIPID_REV_MASK); + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { + struct platform_device *pdev; + + pdev = platform_device_alloc("tps65217-pmic", i); + if (!pdev) { + dev_err(tps->dev, "Cannot create regulator %d\n", i); + continue; + } + + pdev->dev.parent = tps->dev; + platform_device_add_data(pdev, &pdata->tps65217_init_data[i], + sizeof(pdata->tps65217_init_data[i])); + tps->regulator_pdev[i] = pdev; + + platform_device_add(pdev); + } + + return 0; + +err_regmap: + regmap_exit(tps->regmap); + + return ret; +} + +static int __devexit tps65217_remove(struct i2c_client *client) +{ + struct tps65217 *tps = i2c_get_clientdata(client); + int i; + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) + platform_device_unregister(tps->regulator_pdev[i]); + + regmap_exit(tps->regmap); + + return 0; +} + +static const struct i2c_device_id tps65217_id_table[] = { + {"tps65217", 0xF0}, + {/* end of list */} +}; +MODULE_DEVICE_TABLE(i2c, tps65217_id_table); + +static struct i2c_driver tps65217_driver = { + .driver = { + .name = "tps65217", + }, + .id_table = tps65217_id_table, + .probe = tps65217_probe, + .remove = __devexit_p(tps65217_remove), +}; + +static int __init tps65217_init(void) +{ + return i2c_add_driver(&tps65217_driver); +} +subsys_initcall(tps65217_init); + +static void __exit tps65217_exit(void) +{ + i2c_del_driver(&tps65217_driver); +} +module_exit(tps65217_exit); + +MODULE_AUTHOR("AnilKumar Ch "); +MODULE_DESCRIPTION("TPS65217 chip family multi-function driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h new file mode 100644 index 00000000000..e030ef9a64e --- /dev/null +++ b/include/linux/mfd/tps65217.h @@ -0,0 +1,283 @@ +/* + * linux/mfd/tps65217.h + * + * Functions to access TPS65217 power management chip. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_MFD_TPS65217_H +#define __LINUX_MFD_TPS65217_H + +#include +#include +#include + +/* I2C ID for TPS65217 part */ +#define TPS65217_I2C_ID 0x24 + +/* All register addresses */ +#define TPS65217_REG_CHIPID 0X00 +#define TPS65217_REG_PPATH 0X01 +#define TPS65217_REG_INT 0X02 +#define TPS65217_REG_CHGCONFIG0 0X03 +#define TPS65217_REG_CHGCONFIG1 0X04 +#define TPS65217_REG_CHGCONFIG2 0X05 +#define TPS65217_REG_CHGCONFIG3 0X06 +#define TPS65217_REG_WLEDCTRL1 0X07 +#define TPS65217_REG_WLEDCTRL2 0X08 +#define TPS65217_REG_MUXCTRL 0X09 +#define TPS65217_REG_STATUS 0X0A +#define TPS65217_REG_PASSWORD 0X0B +#define TPS65217_REG_PGOOD 0X0C +#define TPS65217_REG_DEFPG 0X0D +#define TPS65217_REG_DEFDCDC1 0X0E +#define TPS65217_REG_DEFDCDC2 0X0F +#define TPS65217_REG_DEFDCDC3 0X10 +#define TPS65217_REG_DEFSLEW 0X11 +#define TPS65217_REG_DEFLDO1 0X12 +#define TPS65217_REG_DEFLDO2 0X13 +#define TPS65217_REG_DEFLS1 0X14 +#define TPS65217_REG_DEFLS2 0X15 +#define TPS65217_REG_ENABLE 0X16 +#define TPS65217_REG_DEFUVLO 0X18 +#define TPS65217_REG_SEQ1 0X19 +#define TPS65217_REG_SEQ2 0X1A +#define TPS65217_REG_SEQ3 0X1B +#define TPS65217_REG_SEQ4 0X1C +#define TPS65217_REG_SEQ5 0X1D +#define TPS65217_REG_SEQ6 0X1E + +/* Register field definitions */ +#define TPS65217_CHIPID_CHIP_MASK 0xF0 +#define TPS65217_CHIPID_REV_MASK 0x0F + +#define TPS65217_PPATH_ACSINK_ENABLE BIT(7) +#define TPS65217_PPATH_USBSINK_ENABLE BIT(6) +#define TPS65217_PPATH_AC_PW_ENABLE BIT(5) +#define TPS65217_PPATH_USB_PW_ENABLE BIT(4) +#define TPS65217_PPATH_AC_CURRENT_MASK 0x0C +#define TPS65217_PPATH_USB_CURRENT_MASK 0x03 + +#define TPS65217_INT_PBM BIT(6) +#define TPS65217_INT_ACM BIT(5) +#define TPS65217_INT_USBM BIT(4) +#define TPS65217_INT_PBI BIT(2) +#define TPS65217_INT_ACI BIT(1) +#define TPS65217_INT_USBI BIT(0) + +#define TPS65217_CHGCONFIG0_TREG BIT(7) +#define TPS65217_CHGCONFIG0_DPPM BIT(6) +#define TPS65217_CHGCONFIG0_TSUSP BIT(5) +#define TPS65217_CHGCONFIG0_TERMI BIT(4) +#define TPS65217_CHGCONFIG0_ACTIVE BIT(3) +#define TPS65217_CHGCONFIG0_CHGTOUT BIT(2) +#define TPS65217_CHGCONFIG0_PCHGTOUT BIT(1) +#define TPS65217_CHGCONFIG0_BATTEMP BIT(0) + +#define TPS65217_CHGCONFIG1_TMR_MASK 0xC0 +#define TPS65217_CHGCONFIG1_TMR_ENABLE BIT(5) +#define TPS65217_CHGCONFIG1_NTC_TYPE BIT(4) +#define TPS65217_CHGCONFIG1_RESET BIT(3) +#define TPS65217_CHGCONFIG1_TERM BIT(2) +#define TPS65217_CHGCONFIG1_SUSP BIT(1) +#define TPS65217_CHGCONFIG1_CHG_EN BIT(0) + +#define TPS65217_CHGCONFIG2_DYNTMR BIT(7) +#define TPS65217_CHGCONFIG2_VPREGHG BIT(6) +#define TPS65217_CHGCONFIG2_VOREG_MASK 0x30 + +#define TPS65217_CHGCONFIG3_ICHRG_MASK 0xC0 +#define TPS65217_CHGCONFIG3_DPPMTH_MASK 0x30 +#define TPS65217_CHGCONFIG2_PCHRGT BIT(3) +#define TPS65217_CHGCONFIG2_TERMIF 0x06 +#define TPS65217_CHGCONFIG2_TRANGE BIT(0) + +#define TPS65217_WLEDCTRL1_ISINK_ENABLE BIT(3) +#define TPS65217_WLEDCTRL1_ISEL BIT(2) +#define TPS65217_WLEDCTRL1_FDIM_MASK 0x03 + +#define TPS65217_WLEDCTRL2_DUTY_MASK 0x7F + +#define TPS65217_MUXCTRL_MUX_MASK 0x07 + +#define TPS65217_STATUS_OFF BIT(7) +#define TPS65217_STATUS_ACPWR BIT(3) +#define TPS65217_STATUS_USBPWR BIT(2) +#define TPS65217_STATUS_PB BIT(0) + +#define TPS65217_PASSWORD_REGS_UNLOCK 0x7D + +#define TPS65217_PGOOD_LDO3_PG BIT(6) +#define TPS65217_PGOOD_LDO4_PG BIT(5) +#define TPS65217_PGOOD_DC1_PG BIT(4) +#define TPS65217_PGOOD_DC2_PG BIT(3) +#define TPS65217_PGOOD_DC3_PG BIT(2) +#define TPS65217_PGOOD_LDO1_PG BIT(1) +#define TPS65217_PGOOD_LDO2_PG BIT(0) + +#define TPS65217_DEFPG_LDO1PGM BIT(3) +#define TPS65217_DEFPG_LDO2PGM BIT(2) +#define TPS65217_DEFPG_PGDLY_MASK 0x03 + +#define TPS65217_DEFDCDCX_XADJX BIT(7) +#define TPS65217_DEFDCDCX_DCDC_MASK 0x3F + +#define TPS65217_DEFSLEW_GO BIT(7) +#define TPS65217_DEFSLEW_GODSBL BIT(6) +#define TPS65217_DEFSLEW_PFM_EN1 BIT(5) +#define TPS65217_DEFSLEW_PFM_EN2 BIT(4) +#define TPS65217_DEFSLEW_PFM_EN3 BIT(3) +#define TPS65217_DEFSLEW_SLEW_MASK 0x07 + +#define TPS65217_DEFLDO1_LDO1_MASK 0x0F + +#define TPS65217_DEFLDO2_TRACK BIT(6) +#define TPS65217_DEFLDO2_LDO2_MASK 0x3F + +#define TPS65217_DEFLDO3_LDO3_EN BIT(5) +#define TPS65217_DEFLDO3_LDO3_MASK 0x1F + +#define TPS65217_DEFLDO4_LDO4_EN BIT(5) +#define TPS65217_DEFLDO4_LDO4_MASK 0x1F + +#define TPS65217_ENABLE_LS1_EN BIT(6) +#define TPS65217_ENABLE_LS2_EN BIT(5) +#define TPS65217_ENABLE_DC1_EN BIT(4) +#define TPS65217_ENABLE_DC2_EN BIT(3) +#define TPS65217_ENABLE_DC3_EN BIT(2) +#define TPS65217_ENABLE_LDO1_EN BIT(1) +#define TPS65217_ENABLE_LDO2_EN BIT(0) + +#define TPS65217_DEFUVLO_UVLOHYS BIT(2) +#define TPS65217_DEFUVLO_UVLO_MASK 0x03 + +#define TPS65217_SEQ1_DC1_SEQ_MASK 0xF0 +#define TPS65217_SEQ1_DC2_SEQ_MASK 0x0F + +#define TPS65217_SEQ2_DC3_SEQ_MASK 0xF0 +#define TPS65217_SEQ2_LDO1_SEQ_MASK 0x0F + +#define TPS65217_SEQ3_LDO2_SEQ_MASK 0xF0 +#define TPS65217_SEQ3_LDO3_SEQ_MASK 0x0F + +#define TPS65217_SEQ4_LDO4_SEQ_MASK 0xF0 + +#define TPS65217_SEQ5_DLY1_MASK 0xC0 +#define TPS65217_SEQ5_DLY2_MASK 0x30 +#define TPS65217_SEQ5_DLY3_MASK 0x0C +#define TPS65217_SEQ5_DLY4_MASK 0x03 + +#define TPS65217_SEQ6_DLY5_MASK 0xC0 +#define TPS65217_SEQ6_DLY6_MASK 0x30 +#define TPS65217_SEQ6_SEQUP BIT(2) +#define TPS65217_SEQ6_SEQDWN BIT(1) +#define TPS65217_SEQ6_INSTDWN BIT(0) + +#define TPS65217_MAX_REGISTER 0x1E +#define TPS65217_PROTECT_NONE 0 +#define TPS65217_PROTECT_L1 1 +#define TPS65217_PROTECT_L2 2 + + +enum tps65217_regulator_id { + /* DCDC's */ + TPS65217_DCDC_1, + TPS65217_DCDC_2, + TPS65217_DCDC_3, + /* LDOs */ + TPS65217_LDO_1, + TPS65217_LDO_2, + TPS65217_LDO_3, + TPS65217_LDO_4, +}; + +#define TPS65217_MAX_REG_ID TPS65217_LDO_4 + +/* Number of step-down converters available */ +#define TPS65217_NUM_DCDC 3 +/* Number of LDO voltage regulators available */ +#define TPS65217_NUM_LDO 4 +/* Number of total regulators available */ +#define TPS65217_NUM_REGULATOR (TPS65217_NUM_DCDC + TPS65217_NUM_LDO) + +/** + * struct tps65217_board - packages regulator init data + * @tps65217_regulator_data: regulator initialization values + * + * Board data may be used to initialize regulator. + */ +struct tps65217_board { + struct regulator_init_data *tps65217_init_data; +}; + +/** + * struct tps_info - packages regulator constraints + * @name: Voltage regulator name + * @min_uV: minimum micro volts + * @max_uV: minimum micro volts + * @vsel_to_uv: Function pointer to get voltage from selector + * @uv_to_vsel: Function pointer to get selector from voltage + * @table: Table for non-uniform voltage step-size + * @table_len: Length of the voltage table + * @enable_mask: Regulator enable mask bits + * @set_vout_reg: Regulator output voltage set register + * @set_vout_mask: Regulator output voltage set mask + * + * This data is used to check the regualtor voltage limits while setting. + */ +struct tps_info { + const char *name; + int min_uV; + int max_uV; + int (*vsel_to_uv)(unsigned int vsel); + int (*uv_to_vsel)(int uV, unsigned int *vsel); + const int *table; + unsigned int table_len; + unsigned int enable_mask; + unsigned int set_vout_reg; + unsigned int set_vout_mask; +}; + +/** + * struct tps65217 - tps65217 sub-driver chip access routines + * + * Device data may be used to access the TPS65217 chip + */ + +struct tps65217 { + struct device *dev; + struct tps65217_board *pdata; + struct regulator_desc desc[TPS65217_NUM_REGULATOR]; + struct regulator_dev *rdev[TPS65217_NUM_REGULATOR]; + struct tps_info *info[TPS65217_NUM_REGULATOR]; + struct regmap *regmap; + + /* Client devices */ + struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR]; +}; + +static inline struct tps65217 *dev_to_tps65217(struct device *dev) +{ + return dev_get_drvdata(dev); +} + +int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, + unsigned int *val); +int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, + unsigned int val, unsigned int level); +int tps65217_set_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level); +int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, + unsigned int mask, unsigned int level); + +#endif /* __LINUX_MFD_TPS65217_H */ -- cgit v1.2.3-70-g09d2 From 1039d762d03b573de4d46603c8583051c6d79094 Mon Sep 17 00:00:00 2001 From: Michael Thalmeier Date: Mon, 20 Feb 2012 12:18:13 +0100 Subject: mfd: Add pdata to set mc13783-ts conversion delay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MC13783 can be programmed to wait some clock cycles between the touchscreen polarization and the resistance conversion. This is needed to adjust for touchscreens with high capacitance between plates. Signed-off-by: Michael Thalmeier Acked-by: Uwe Kleine-König Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz --- drivers/hwmon/mc13783-adc.c | 2 +- drivers/input/touchscreen/mc13783_ts.c | 11 ++++++++++- drivers/mfd/mc13xxx-core.c | 11 +++++++++-- include/linux/mfd/mc13xxx.h | 16 +++++++++++++++- 4 files changed, 35 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c index ef65ab56b09..6acd0442772 100644 --- a/drivers/hwmon/mc13783-adc.c +++ b/drivers/hwmon/mc13783-adc.c @@ -53,7 +53,7 @@ static int mc13783_adc_read(struct device *dev, ret = mc13xxx_adc_do_conversion(priv->mc13xxx, MC13XXX_ADC_MODE_MULT_CHAN, - channel, sample); + channel, 0, 0, sample); if (ret) return ret; diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index ede02743eac..48dc5b0d26f 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -39,6 +39,7 @@ struct mc13783_ts_priv { struct delayed_work work; struct workqueue_struct *workq; unsigned int sample[4]; + struct mc13xxx_ts_platform_data *touch; }; static irqreturn_t mc13783_ts_handler(int irq, void *data) @@ -125,7 +126,9 @@ static void mc13783_ts_work(struct work_struct *work) unsigned int channel = 12; if (mc13xxx_adc_do_conversion(priv->mc13xxx, - mode, channel, priv->sample) == 0) + mode, channel, + priv->touch->ato, priv->touch->atox, + priv->sample) == 0) mc13783_ts_report_sample(priv); } @@ -179,6 +182,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&priv->work, mc13783_ts_work); priv->mc13xxx = dev_get_drvdata(pdev->dev.parent); priv->idev = idev; + priv->touch = dev_get_platdata(&pdev->dev); + if (!priv->touch) { + dev_err(&pdev->dev, "missing platform data\n"); + ret = -ENODEV; + goto err_free_mem; + } /* * We need separate workqueue because mc13783_adc_do_conversion diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 7122386b4e3..9fd4f63c45c 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -560,6 +560,8 @@ EXPORT_SYMBOL(mc13xxx_get_flags); #define MC13XXX_ADC1_CHAN0_SHIFT 5 #define MC13XXX_ADC1_CHAN1_SHIFT 8 +#define MC13783_ADC1_ATO_SHIFT 11 +#define MC13783_ADC1_ATOX (1 << 19) struct mc13xxx_adcdone_data { struct mc13xxx *mc13xxx; @@ -580,7 +582,8 @@ static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data) #define MC13XXX_ADC_WORKING (1 << 0) int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, - unsigned int channel, unsigned int *sample) + unsigned int channel, u8 ato, bool atox, + unsigned int *sample) { u32 adc0, adc1, old_adc0; int i, ret; @@ -631,6 +634,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, return -EINVAL; } + adc1 |= ato << MC13783_ADC1_ATO_SHIFT; + if (atox) + adc1 |= MC13783_ADC1_ATOX; dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__); mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE, mc13xxx_handler_adcdone, __func__, &adcdone_data); @@ -813,7 +819,8 @@ err_revision: mc13xxx_add_subdevice(mc13xxx, "%s-rtc"); if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN) - mc13xxx_add_subdevice(mc13xxx, "%s-ts"); + mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts", + &pdata->touch, sizeof(pdata->touch)); if (pdata) { mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator", diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index b86ee45c8b0..10e038bac8d 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -38,7 +38,8 @@ int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq); int mc13xxx_get_flags(struct mc13xxx *mc13xxx); int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, - unsigned int mode, unsigned int channel, unsigned int *sample); + unsigned int mode, unsigned int channel, + u8 ato, bool atox, unsigned int *sample); #define MC13XXX_IRQ_ADCDONE 0 #define MC13XXX_IRQ_ADCBISDONE 1 @@ -157,6 +158,18 @@ struct mc13xxx_buttons_platform_data { unsigned short b3on_key; }; +struct mc13xxx_ts_platform_data { + /* Delay between Touchscreen polarization and ADC Conversion. + * Given in clock ticks of a 32 kHz clock which gives a granularity of + * about 30.5ms */ + u8 ato; + +#define MC13783_TS_ATO_FIRST false +#define MC13783_TS_ATO_EACH true + /* Use the ATO delay only for the first conversion or for each one */ + bool atox; +}; + struct mc13xxx_platform_data { #define MC13XXX_USE_TOUCHSCREEN (1 << 0) #define MC13XXX_USE_CODEC (1 << 1) @@ -167,6 +180,7 @@ struct mc13xxx_platform_data { struct mc13xxx_regulator_platform_data regulators; struct mc13xxx_leds_platform_data *leds; struct mc13xxx_buttons_platform_data *buttons; + struct mc13xxx_ts_platform_data touch; }; #define MC13XXX_ADC_MODE_TS 1 -- cgit v1.2.3-70-g09d2 From c72fe851df21603cd149320df49064eb2f903707 Mon Sep 17 00:00:00 2001 From: Daniel Willerud Date: Fri, 13 Jan 2012 16:20:03 +0100 Subject: mfd: Remove db8500-prcmu U8400 legacy This removes the U8400 legacy from PRCMU and cpufreq drivers. This platform has no current in-kernel users. Signed-off-by: Daniel Willerud Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/cpufreq/db8500-cpufreq.c | 13 +++++-------- drivers/mfd/db8500-prcmu.c | 26 ++------------------------ include/linux/mfd/db8500-prcmu.h | 6 ------ 3 files changed, 7 insertions(+), 38 deletions(-) (limited to 'include/linux') diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index f5002015d82..a22ffa5bff9 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -22,11 +22,11 @@ static struct cpufreq_frequency_table freq_table[] = { }, [1] = { .index = 1, - .frequency = 300000, + .frequency = 400000, }, [2] = { .index = 2, - .frequency = 600000, + .frequency = 800000, }, [3] = { /* Used for MAX_OPP, if available */ @@ -113,12 +113,9 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table)); - if (!prcmu_is_u8400()) { - freq_table[1].frequency = 400000; - freq_table[2].frequency = 800000; - if (prcmu_has_arm_maxopp()) - freq_table[3].frequency = 1000000; - } + if (prcmu_has_arm_maxopp()) + freq_table[3].frequency = 1000000; + pr_info("db8500-cpufreq : Available frequencies:\n"); for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) pr_info(" %d Mhz\n", freq_table[i].frequency/1000); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index af8e0efedbe..b9119636850 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -503,9 +503,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { /* PLLDIV=12, PLLSW=4 (PLLDDR) */ #define PRCMU_DSI_CLOCK_SETTING 0x0000008C -/* PLLDIV=8, PLLSW=4 (PLLDDR) */ -#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088 - /* DPI 50000000 Hz */ #define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \ (16 << PRCMU_CLK_PLL_DIV_SHIFT)) @@ -514,9 +511,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { /* D=101, N=1, R=4, SELDIV2=0 */ #define PRCMU_PLLDSI_FREQ_SETTING 0x00040165 -/* D=70, N=1, R=3, SELDIV2=0 */ -#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146 - #define PRCMU_ENABLE_PLLDSI 0x00000001 #define PRCMU_DISABLE_PLLDSI 0x00000000 #define PRCMU_RELEASE_RESET_DSS 0x0000400C @@ -539,19 +533,14 @@ static struct { int db8500_prcmu_enable_dsipll(void) { int i; - unsigned int plldsifreq; /* Clear DSIPLL_RESETN */ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); /* Unclamp DSIPLL in/out */ writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); - if (prcmu_is_u8400()) - plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400; - else - plldsifreq = PRCMU_PLLDSI_FREQ_SETTING; /* Set DSI PLL FREQ */ - writel(plldsifreq, PRCM_PLLDSI_FREQ); + writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ); writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL); /* Enable Escape clocks */ writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); @@ -583,12 +572,6 @@ int db8500_prcmu_disable_dsipll(void) int db8500_prcmu_set_display_clocks(void) { unsigned long flags; - unsigned int dsiclk; - - if (prcmu_is_u8400()) - dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400; - else - dsiclk = PRCMU_DSI_CLOCK_SETTING; spin_lock_irqsave(&clk_mgt_lock, flags); @@ -596,7 +579,7 @@ int db8500_prcmu_set_display_clocks(void) while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - writel(dsiclk, PRCM_HDMICLK_MGT); + writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT); writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT); @@ -642,11 +625,6 @@ bool prcmu_has_arm_maxopp(void) PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK; } -bool prcmu_is_u8400(void) -{ - return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0; -} - /** * prcmu_get_boot_status - PRCMU boot status checking * Returns: the current PRCMU boot status diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 60d27f7bfc1..0dc9017272b 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -500,7 +500,6 @@ int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); -bool prcmu_is_u8400(void); int prcmu_set_ape_opp(u8 opp); int prcmu_get_ape_opp(void); int prcmu_request_ape_opp_100_voltage(bool enable); @@ -574,11 +573,6 @@ static inline bool prcmu_has_arm_maxopp(void) return false; } -static inline bool prcmu_is_u8400(void) -{ - return false; -} - static inline int prcmu_set_ape_opp(u8 opp) { return 0; -- cgit v1.2.3-70-g09d2 From b58d12fe6ccd16030e1a69b5c443075f7bed0f6d Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Fri, 13 Jan 2012 16:20:10 +0100 Subject: mfd: Function for obtaining the db8500 prcmu firmware version This patch exports a function that can be used to tell which version of the DB8500 PRCMU firmware is available, and revamps the firmware detection code a bit. Reviewed-by: Bengt Jonsson Reviewed-by: Jonas Aberg Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 51 ++++++++++++++++++++++++++-------------- include/linux/mfd/db8500-prcmu.h | 18 ++++++++++++++ 2 files changed, 51 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index b9119636850..12519935da6 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -39,11 +39,6 @@ /* Offset for the firmware version within the TCPM */ #define PRCMU_FW_VERSION_OFFSET 0xA4 -/* PRCMU project numbers, defined by PRCMU FW */ -#define PRCMU_PROJECT_ID_8500V1_0 1 -#define PRCMU_PROJECT_ID_8500V2_0 2 -#define PRCMU_PROJECT_ID_8400V2_0 3 - /* Index of different voltages to be used when accessing AVSData */ #define PRCM_AVS_BASE 0x2FC #define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) @@ -266,6 +261,11 @@ #define WAKEUP_BIT_GPIO7 BIT(30) #define WAKEUP_BIT_GPIO8 BIT(31) +static struct { + bool valid; + struct prcmu_fw_version version; +} fw_info; + /* * This vector maps irq numbers to the bits in the bit field used in * communication with the PRCMU firmware. @@ -522,14 +522,6 @@ static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { #define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 -static struct { - u8 project_number; - u8 api_version; - u8 func_version; - u8 errata; -} prcmu_version; - - int db8500_prcmu_enable_dsipll(void) { int i; @@ -619,6 +611,11 @@ void prcmu_disable_spi2(void) spin_unlock_irqrestore(&gpiocr_lock, flags); } +struct prcmu_fw_version *prcmu_get_fw_version(void) +{ + return fw_info.valid ? &fw_info.version : NULL; +} + bool prcmu_has_arm_maxopp(void) { return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & @@ -2077,6 +2074,22 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, }; +static char *fw_project_name(u8 project) +{ + switch (project) { + case PRCMU_FW_PROJECT_U8500: + return "U8500"; + case PRCMU_FW_PROJECT_U8500_C2: + return "U8500 C2"; + case PRCMU_FW_PROJECT_U9500: + return "U9500"; + case PRCMU_FW_PROJECT_U9500_C2: + return "U9500 C2"; + default: + return "Unknown"; + } +} + void __init db8500_prcmu_early_init(void) { unsigned int i; @@ -2086,11 +2099,13 @@ void __init db8500_prcmu_early_init(void) if (tcpm_base != NULL) { u32 version; version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); - prcmu_version.project_number = version & 0xFF; - prcmu_version.api_version = (version >> 8) & 0xFF; - prcmu_version.func_version = (version >> 16) & 0xFF; - prcmu_version.errata = (version >> 24) & 0xFF; - pr_info("PRCMU firmware version %d.%d.%d\n", + fw_info.version.project = version & 0xFF; + fw_info.version.api_version = (version >> 8) & 0xFF; + fw_info.version.func_version = (version >> 16) & 0xFF; + fw_info.version.errata = (version >> 24) & 0xFF; + fw_info.valid = true; + pr_info("PRCMU firmware: %s, version %d.%d.%d\n", + fw_project_name(fw_info.version.project), (version >> 8) & 0xFF, (version >> 16) & 0xFF, (version >> 24) & 0xFF); iounmap(tcpm_base); diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 0dc9017272b..18959171f44 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -493,6 +493,18 @@ struct prcmu_auto_pm_config { u8 sva_policy; }; +#define PRCMU_FW_PROJECT_U8500 2 +#define PRCMU_FW_PROJECT_U9500 4 +#define PRCMU_FW_PROJECT_U8500_C2 7 +#define PRCMU_FW_PROJECT_U9500_C2 11 + +struct prcmu_fw_version { + u8 project; + u8 api_version; + u8 func_version; + u8 errata; +}; + #ifdef CONFIG_MFD_DB8500_PRCMU void db8500_prcmu_early_init(void); @@ -502,6 +514,7 @@ enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); int prcmu_set_ape_opp(u8 opp); int prcmu_get_ape_opp(void); +struct prcmu_fw_version *prcmu_get_fw_version(void); int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); int prcmu_set_ddr_opp(u8 opp); @@ -573,6 +586,11 @@ static inline bool prcmu_has_arm_maxopp(void) return false; } +static inline struct prcmu_fw_version *prcmu_get_fw_version(void) +{ + return NULL; +} + static inline int prcmu_set_ape_opp(u8 opp) { return 0; -- cgit v1.2.3-70-g09d2 From 0508901ca794d411efb09befb88b8194d8387428 Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Fri, 13 Jan 2012 16:20:20 +0100 Subject: mfd: Update abstract dbx500 interface This prefixes a number of accessor functions with db8500_* since they are DB8500-specific and we need to move to this naming scheme. We also replace numerous instances of machine_is() with cpu_is() which covers the right type of ASICs rather than entire machines i.e. boards. Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 42 +++++----- include/linux/mfd/db8500-prcmu.h | 61 +++++++------- include/linux/mfd/dbx500-prcmu.h | 175 ++++++++++++++++++++++++++++++++++----- 3 files changed, 204 insertions(+), 74 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 12519935da6..5179abf9472 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -884,23 +884,23 @@ int db8500_prcmu_get_arm_opp(void) } /** - * prcmu_get_ddr_opp - get the current DDR OPP + * db8500_prcmu_get_ddr_opp - get the current DDR OPP * * Returns: the current DDR OPP */ -int prcmu_get_ddr_opp(void) +int db8500_prcmu_get_ddr_opp(void) { return readb(PRCM_DDR_SUBSYS_APE_MINBW); } /** - * set_ddr_opp - set the appropriate DDR OPP + * db8500_set_ddr_opp - set the appropriate DDR OPP * @opp: The new DDR operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the operating point of the DDR. */ -int prcmu_set_ddr_opp(u8 opp) +int db8500_prcmu_set_ddr_opp(u8 opp) { if (opp < DDR_100_OPP || opp > DDR_25_OPP) return -EINVAL; @@ -911,13 +911,13 @@ int prcmu_set_ddr_opp(u8 opp) return 0; } /** - * set_ape_opp - set the appropriate APE OPP + * db8500_set_ape_opp - set the appropriate APE OPP * @opp: The new APE operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * * This function sets the operating point of the APE. */ -int prcmu_set_ape_opp(u8 opp) +int db8500_prcmu_set_ape_opp(u8 opp) { int r = 0; @@ -943,11 +943,11 @@ int prcmu_set_ape_opp(u8 opp) } /** - * prcmu_get_ape_opp - get the current APE OPP + * db8500_prcmu_get_ape_opp - get the current APE OPP * * Returns: the current APE OPP */ -int prcmu_get_ape_opp(void) +int db8500_prcmu_get_ape_opp(void) { return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP); } @@ -1451,7 +1451,7 @@ int db8500_prcmu_config_esram0_deep_sleep(u8 state) return 0; } -int prcmu_config_hotdog(u8 threshold) +int db8500_prcmu_config_hotdog(u8 threshold) { mutex_lock(&mb4_transfer.lock); @@ -1469,7 +1469,7 @@ int prcmu_config_hotdog(u8 threshold) return 0; } -int prcmu_config_hotmon(u8 low, u8 high) +int db8500_prcmu_config_hotmon(u8 low, u8 high) { mutex_lock(&mb4_transfer.lock); @@ -1508,7 +1508,7 @@ static int config_hot_period(u16 val) return 0; } -int prcmu_start_temp_sense(u16 cycles32k) +int db8500_prcmu_start_temp_sense(u16 cycles32k) { if (cycles32k == 0xFFFF) return -EINVAL; @@ -1516,7 +1516,7 @@ int prcmu_start_temp_sense(u16 cycles32k) return config_hot_period(cycles32k); } -int prcmu_stop_temp_sense(void) +int db8500_prcmu_stop_temp_sense(void) { return config_hot_period(0xFFFF); } @@ -1545,7 +1545,7 @@ static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3) } -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { BUG_ON(num == 0 || num > 0xf); return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0, @@ -1553,17 +1553,17 @@ int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) A9WDOG_AUTO_OFF_DIS); } -int prcmu_enable_a9wdog(u8 id) +int db8500_prcmu_enable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0); } -int prcmu_disable_a9wdog(u8 id) +int db8500_prcmu_disable_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0); } -int prcmu_kick_a9wdog(u8 id) +int db8500_prcmu_kick_a9wdog(u8 id) { return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0); } @@ -1572,7 +1572,7 @@ int prcmu_kick_a9wdog(u8 id) * timeout is 28 bit, in ms. */ #define MAX_WATCHDOG_TIMEOUT 131000 -int prcmu_load_a9wdog(u8 id, u32 timeout) +int db8500_prcmu_load_a9wdog(u8 id, u32 timeout) { if (timeout > MAX_WATCHDOG_TIMEOUT) /* @@ -1825,9 +1825,9 @@ u16 db8500_prcmu_get_reset_code(void) } /** - * prcmu_reset_modem - ask the PRCMU to reset modem + * db8500_prcmu_reset_modem - ask the PRCMU to reset modem */ -void prcmu_modem_reset(void) +void db8500_prcmu_modem_reset(void) { mutex_lock(&mb1_transfer.lock); @@ -2147,7 +2147,7 @@ void __init db8500_prcmu_early_init(void) } } -static void __init db8500_prcmu_init_clkforce(void) +static void __init init_prcm_registers(void) { u32 val; @@ -2405,7 +2405,7 @@ static int __init db8500_prcmu_probe(struct platform_device *pdev) if (ux500_is_svp()) return -ENODEV; - db8500_prcmu_init_clkforce(); + init_prcm_registers(); /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 18959171f44..c5028f1246f 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -512,13 +512,9 @@ int prcmu_set_rc_a2p(enum romcode_write); enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); /* NOTE! Use regulator framework instead */ int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, @@ -527,24 +523,24 @@ bool prcmu_is_auto_pm_enabled(void); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); int prcmu_set_clock_divider(u8 clock, u8 divider); -int prcmu_config_hotdog(u8 threshold); -int prcmu_config_hotmon(u8 low, u8 high); -int prcmu_start_temp_sense(u16 cycles32k); -int prcmu_stop_temp_sense(void); +int db8500_prcmu_config_hotdog(u8 threshold); +int db8500_prcmu_config_hotmon(u8 low, u8 high); +int db8500_prcmu_start_temp_sense(u16 cycles32k); +int db8500_prcmu_stop_temp_sense(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); +void db8500_prcmu_modem_reset(void); void prcmu_enable_spi2(void); void prcmu_disable_spi2(void); -int prcmu_config_a9wdog(u8 num, bool sleep_auto_off); -int prcmu_enable_a9wdog(u8 id); -int prcmu_disable_a9wdog(u8 id); -int prcmu_kick_a9wdog(u8 id); -int prcmu_load_a9wdog(u8 id, u32 val); +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off); +int db8500_prcmu_enable_a9wdog(u8 id); +int db8500_prcmu_disable_a9wdog(u8 id); +int db8500_prcmu_kick_a9wdog(u8 id); +int db8500_prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); @@ -561,6 +557,10 @@ u16 db8500_prcmu_get_reset_code(void); bool db8500_prcmu_is_ac_wake_requested(void); int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); +int db8500_prcmu_set_ape_opp(u8 opp); +int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_set_ddr_opp(u8 opp); +int db8500_prcmu_get_ddr_opp(void); #else /* !CONFIG_MFD_DB8500_PRCMU */ @@ -591,12 +591,12 @@ static inline struct prcmu_fw_version *prcmu_get_fw_version(void) return NULL; } -static inline int prcmu_set_ape_opp(u8 opp) +static inline int db8500_prcmu_set_ape_opp(u8 opp) { return 0; } -static inline int prcmu_get_ape_opp(void) +static inline int db8500_prcmu_get_ape_opp(void) { return APE_100_OPP; } @@ -611,12 +611,12 @@ static inline int prcmu_release_usb_wakeup_state(void) return 0; } -static inline int prcmu_set_ddr_opp(u8 opp) +static inline int db8500_prcmu_set_ddr_opp(u8 opp) { return 0; } -static inline int prcmu_get_ddr_opp(void) +static inline int db8500_prcmu_get_ddr_opp(void) { return DDR_100_OPP; } @@ -625,7 +625,6 @@ static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) { return 0; } - static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle) { @@ -646,22 +645,22 @@ static inline int prcmu_set_clock_divider(u8 clock, u8 divider) return 0; } -static inline int prcmu_config_hotdog(u8 threshold) +static inline int db8500_prcmu_config_hotdog(u8 threshold) { return 0; } -static inline int prcmu_config_hotmon(u8 low, u8 high) +static inline int db8500_prcmu_config_hotmon(u8 low, u8 high) { return 0; } -static inline int prcmu_start_temp_sense(u16 cycles32k) +static inline int db8500_prcmu_start_temp_sense(u16 cycles32k) { return 0; } -static inline int prcmu_stop_temp_sense(void) +static inline int db8500_prcmu_stop_temp_sense(void) { return 0; } @@ -680,7 +679,9 @@ static inline void prcmu_ac_wake_req(void) {} static inline void prcmu_ac_sleep_req(void) {} -static inline void prcmu_modem_reset(void) {} +static inline void db8500_prcmu_modem_reset(void) {} + +static inline void db8500_prcmu_system_reset(u16 reset_code) {} static inline int prcmu_enable_spi2(void) { @@ -692,8 +693,6 @@ static inline int prcmu_disable_spi2(void) return 0; } -static inline void db8500_prcmu_system_reset(u16 reset_code) {} - static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { @@ -741,27 +740,27 @@ static inline u16 db8500_prcmu_get_reset_code(void) return 0; } -static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { return 0; } -static inline int prcmu_enable_a9wdog(u8 id) +static inline int db8500_prcmu_enable_a9wdog(u8 id) { return 0; } -static inline int prcmu_disable_a9wdog(u8 id) +static inline int db8500_prcmu_disable_a9wdog(u8 id) { return 0; } -static inline int prcmu_kick_a9wdog(u8 id) +static inline int db8500_prcmu_kick_a9wdog(u8 id) { return 0; } -static inline int prcmu_load_a9wdog(u8 id, u32 val) +static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val) { return 0; } diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index bac942f959c..f73b9d9d2a2 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -10,7 +10,7 @@ #include #include -#include +#include /* PRCMU Wakeup defines */ enum prcmu_wakeup_index { @@ -218,9 +218,11 @@ enum ddr_pwrst { #if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) +#include + static inline void __init prcmu_early_init(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_early_init(); else return db8500_prcmu_early_init(); @@ -229,7 +231,7 @@ static inline void __init prcmu_early_init(void) static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_set_power_state(state, keep_ulp_clk, keep_ap_pll); else @@ -239,7 +241,7 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_set_epod(epod_id, epod_state); @@ -247,7 +249,7 @@ static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) static inline void prcmu_enable_wakeups(u32 wakeups) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_enable_wakeups(wakeups); else db8500_prcmu_enable_wakeups(wakeups); @@ -260,7 +262,7 @@ static inline void prcmu_disable_wakeups(void) static inline void prcmu_config_abb_event_readout(u32 abb_events) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_config_abb_event_readout(abb_events); else db8500_prcmu_config_abb_event_readout(abb_events); @@ -268,7 +270,7 @@ static inline void prcmu_config_abb_event_readout(u32 abb_events) static inline void prcmu_get_abb_event_buffer(void __iomem **buf) { - if (machine_is_u5500()) + if (cpu_is_u5500()) db5500_prcmu_get_abb_event_buffer(buf); else db8500_prcmu_get_abb_event_buffer(buf); @@ -281,20 +283,34 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div); static inline int prcmu_request_clock(u8 clock, bool enable) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_request_clock(clock, enable); else return db8500_prcmu_request_clock(clock, enable); } -int prcmu_set_ape_opp(u8 opp); -int prcmu_get_ape_opp(void); -int prcmu_set_ddr_opp(u8 opp); -int prcmu_get_ddr_opp(void); +unsigned long prcmu_clock_rate(u8 clock); +long prcmu_round_clock_rate(u8 clock, unsigned long rate); +int prcmu_set_clock_rate(u8 clock, unsigned long rate); + +static inline int prcmu_set_ddr_opp(u8 opp) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_set_ddr_opp(opp); +} +static inline int prcmu_get_ddr_opp(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_ddr_opp(); +} static inline int prcmu_set_arm_opp(u8 opp) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_set_arm_opp(opp); @@ -302,15 +318,31 @@ static inline int prcmu_set_arm_opp(u8 opp) static inline int prcmu_get_arm_opp(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_get_arm_opp(); } +static inline int prcmu_set_ape_opp(u8 opp) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_set_ape_opp(opp); +} + +static inline int prcmu_get_ape_opp(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_ape_opp(); +} + static inline void prcmu_system_reset(u16 reset_code) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_system_reset(reset_code); else return db8500_prcmu_system_reset(reset_code); @@ -318,7 +350,7 @@ static inline void prcmu_system_reset(u16 reset_code) static inline u16 prcmu_get_reset_code(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_get_reset_code(); else return db8500_prcmu_get_reset_code(); @@ -326,10 +358,17 @@ static inline u16 prcmu_get_reset_code(void) void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); -void prcmu_modem_reset(void); +static inline void prcmu_modem_reset(void) +{ + if (cpu_is_u5500()) + return; + else + return db8500_prcmu_modem_reset(); +} + static inline bool prcmu_is_ac_wake_requested(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_is_ac_wake_requested(); else return db8500_prcmu_is_ac_wake_requested(); @@ -337,7 +376,7 @@ static inline bool prcmu_is_ac_wake_requested(void) static inline int prcmu_set_display_clocks(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_set_display_clocks(); else return db8500_prcmu_set_display_clocks(); @@ -345,7 +384,7 @@ static inline int prcmu_set_display_clocks(void) static inline int prcmu_disable_dsipll(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_disable_dsipll(); else return db8500_prcmu_disable_dsipll(); @@ -353,7 +392,7 @@ static inline int prcmu_disable_dsipll(void) static inline int prcmu_enable_dsipll(void) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return db5500_prcmu_enable_dsipll(); else return db8500_prcmu_enable_dsipll(); @@ -361,11 +400,83 @@ static inline int prcmu_enable_dsipll(void) static inline int prcmu_config_esram0_deep_sleep(u8 state) { - if (machine_is_u5500()) + if (cpu_is_u5500()) return -EINVAL; else return db8500_prcmu_config_esram0_deep_sleep(state); } + +static inline int prcmu_config_hotdog(u8 threshold) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_hotdog(threshold); +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_hotmon(low, high); +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_start_temp_sense(cycles32k); +} + +static inline int prcmu_stop_temp_sense(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_stop_temp_sense(); +} + +static inline int prcmu_enable_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_enable_a9wdog(id); +} + +static inline int prcmu_disable_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_disable_a9wdog(id); +} + +static inline int prcmu_kick_a9wdog(u8 id) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_kick_a9wdog(id); +} + +static inline int prcmu_load_a9wdog(u8 id, u32 timeout) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_load_a9wdog(id, timeout); +} + +static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_config_a9wdog(num, sleep_auto_off); +} #else static inline void __init prcmu_early_init(void) {} @@ -480,6 +591,26 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) *buf = NULL; } +static inline int prcmu_config_hotdog(u8 threshold) +{ + return 0; +} + +static inline int prcmu_config_hotmon(u8 low, u8 high) +{ + return 0; +} + +static inline int prcmu_start_temp_sense(u16 cycles32k) +{ + return 0; +} + +static inline int prcmu_stop_temp_sense(void) +{ + return 0; +} + #endif /* PRCMU QoS APE OPP class */ -- cgit v1.2.3-70-g09d2 From 6b6fae2b890826c99f9e62cceec4f859c98ee575 Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Fri, 13 Jan 2012 16:20:28 +0100 Subject: mfd: db8500 clock handling update This updates the clock handling in the DB8500 PRCMU driver with the latest findings and API changes related to changes in the backing firmware in the PRCMU. - Add the necessary interfaces to get the frequencies of the clocks and set the rate of some of the clocks. - Add support for controlling the clocks PLLSOC0, PLLDSI, DSI0, DSI1 and DSI escape clocks (DSInESCCLK). - Correct the PLLSDI enable/disable sequence by using the DSIPLL_CLAMPI bit. After this we will have the interfaces and code to implement the U8500 clock framework properly. Reviewed-by: Jonas Aberg Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 666 ++++++++++++++++++++++++++++++++++----- drivers/mfd/dbx500-prcmu-regs.h | 128 +++++--- include/linux/mfd/dbx500-prcmu.h | 47 +++ 3 files changed, 720 insertions(+), 121 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5179abf9472..94593271932 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -132,6 +132,8 @@ #define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0) #define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1) #define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4) +#define PLL_SOC0_OFF 0x1 +#define PLL_SOC0_ON 0x2 #define PLL_SOC1_OFF 0x4 #define PLL_SOC1_ON 0x8 @@ -420,43 +422,95 @@ static DEFINE_SPINLOCK(gpiocr_lock); static __iomem void *tcdm_base; struct clk_mgt { - unsigned int offset; + void __iomem *reg; u32 pllsw; + int branch; + bool clk38div; +}; + +enum { + PLL_RAW, + PLL_FIX, + PLL_DIV }; static DEFINE_SPINLOCK(clk_mgt_lock); -#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 } +#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \ + { (PRCM_##_name##_MGT), 0 , _branch, _clk38div} struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = { - CLK_MGT_ENTRY(SGACLK), - CLK_MGT_ENTRY(UARTCLK), - CLK_MGT_ENTRY(MSP02CLK), - CLK_MGT_ENTRY(MSP1CLK), - CLK_MGT_ENTRY(I2CCLK), - CLK_MGT_ENTRY(SDMMCCLK), - CLK_MGT_ENTRY(SLIMCLK), - CLK_MGT_ENTRY(PER1CLK), - CLK_MGT_ENTRY(PER2CLK), - CLK_MGT_ENTRY(PER3CLK), - CLK_MGT_ENTRY(PER5CLK), - CLK_MGT_ENTRY(PER6CLK), - CLK_MGT_ENTRY(PER7CLK), - CLK_MGT_ENTRY(LCDCLK), - CLK_MGT_ENTRY(BMLCLK), - CLK_MGT_ENTRY(HSITXCLK), - CLK_MGT_ENTRY(HSIRXCLK), - CLK_MGT_ENTRY(HDMICLK), - CLK_MGT_ENTRY(APEATCLK), - CLK_MGT_ENTRY(APETRACECLK), - CLK_MGT_ENTRY(MCDECLK), - CLK_MGT_ENTRY(IPI2CCLK), - CLK_MGT_ENTRY(DSIALTCLK), - CLK_MGT_ENTRY(DMACLK), - CLK_MGT_ENTRY(B2R2CLK), - CLK_MGT_ENTRY(TVCLK), - CLK_MGT_ENTRY(SSPCLK), - CLK_MGT_ENTRY(RNGCLK), - CLK_MGT_ENTRY(UICCCLK), + CLK_MGT_ENTRY(SGACLK, PLL_DIV, false), + CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true), + CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true), + CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true), + CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true), + CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true), + CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true), + CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true), + CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true), + CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true), + CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true), + CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false), + CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true), + CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true), + CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true), + CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true), + CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false), + CLK_MGT_ENTRY(DMACLK, PLL_DIV, true), + CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true), + CLK_MGT_ENTRY(TVCLK, PLL_FIX, true), + CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true), + CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true), + CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false), +}; + +struct dsiclk { + u32 divsel_mask; + u32 divsel_shift; + u32 divsel; +}; + +static struct dsiclk dsiclk[2] = { + { + .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK, + .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT, + .divsel = PRCM_DSI_PLLOUT_SEL_PHI, + }, + { + .divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK, + .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT, + .divsel = PRCM_DSI_PLLOUT_SEL_PHI, + } +}; + +struct dsiescclk { + u32 en; + u32 div_mask; + u32 div_shift; +}; + +static struct dsiescclk dsiescclk[3] = { + { + .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT, + }, + { + .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT, + }, + { + .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN, + .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK, + .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT, + } }; static struct regulator *hwacc_regulator[NUM_HW_ACC]; @@ -910,6 +964,7 @@ int db8500_prcmu_set_ddr_opp(u8 opp) return 0; } + /** * db8500_set_ape_opp - set the appropriate APE OPP * @opp: The new APE operating point to which transition is to be made @@ -1031,7 +1086,9 @@ static int request_pll(u8 clock, bool enable) { int r = 0; - if (clock == PRCMU_PLLSOC1) + if (clock == PRCMU_PLLSOC0) + clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF); + else if (clock == PRCMU_PLLSOC1) clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF); else return -EINVAL; @@ -1350,7 +1407,7 @@ static int request_timclk(bool enable) return 0; } -static int request_reg_clock(u8 clock, bool enable) +static int request_clock(u8 clock, bool enable) { u32 val; unsigned long flags; @@ -1361,14 +1418,14 @@ static int request_reg_clock(u8 clock, bool enable) while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) cpu_relax(); - val = readl(_PRCMU_BASE + clk_mgt[clock].offset); + val = readl(clk_mgt[clock].reg); if (enable) { val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw); } else { clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK); } - writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); + writel(val, clk_mgt[clock].reg); /* Release the HW semaphore. */ writel(0, PRCM_SEM); @@ -1388,7 +1445,7 @@ static int request_sga_clock(u8 clock, bool enable) writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS); } - ret = request_reg_clock(clock, enable); + ret = request_clock(clock, enable); if (!ret && !enable) { val = readl(PRCM_CGATING_BYPASS); @@ -1398,6 +1455,78 @@ static int request_sga_clock(u8 clock, bool enable) return ret; } +static inline bool plldsi_locked(void) +{ + return (readl(PRCM_PLLDSI_LOCKP) & + (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 | + PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) == + (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 | + PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3); +} + +static int request_plldsi(bool enable) +{ + int r = 0; + u32 val; + + writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP | + PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ? + PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET)); + + val = readl(PRCM_PLLDSI_ENABLE); + if (enable) + val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + else + val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + writel(val, PRCM_PLLDSI_ENABLE); + + if (enable) { + unsigned int i; + bool locked = plldsi_locked(); + + for (i = 10; !locked && (i > 0); --i) { + udelay(100); + locked = plldsi_locked(); + } + if (locked) { + writel(PRCM_APE_RESETN_DSIPLL_RESETN, + PRCM_APE_RESETN_SET); + } else { + writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP | + PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), + PRCM_MMIP_LS_CLAMP_SET); + val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE; + writel(val, PRCM_PLLDSI_ENABLE); + r = -EAGAIN; + } + } else { + writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR); + } + return r; +} + +static int request_dsiclk(u8 n, bool enable) +{ + u32 val; + + val = readl(PRCM_DSI_PLLOUT_SEL); + val &= ~dsiclk[n].divsel_mask; + val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) << + dsiclk[n].divsel_shift); + writel(val, PRCM_DSI_PLLOUT_SEL); + return 0; +} + +static int request_dsiescclk(u8 n, bool enable) +{ + u32 val; + + val = readl(PRCM_DSITVCLK_DIV); + enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en); + writel(val, PRCM_DSITVCLK_DIV); + return 0; +} + /** * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled. * @clock: The clock for which the request is made. @@ -1408,21 +1537,435 @@ static int request_sga_clock(u8 clock, bool enable) */ int db8500_prcmu_request_clock(u8 clock, bool enable) { - switch(clock) { - case PRCMU_SGACLK: + if (clock == PRCMU_SGACLK) return request_sga_clock(clock, enable); - case PRCMU_TIMCLK: + else if (clock < PRCMU_NUM_REG_CLOCKS) + return request_clock(clock, enable); + else if (clock == PRCMU_TIMCLK) return request_timclk(enable); - case PRCMU_SYSCLK: + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return request_dsiclk((clock - PRCMU_DSI0CLK), enable); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable); + else if (clock == PRCMU_PLLDSI) + return request_plldsi(enable); + else if (clock == PRCMU_SYSCLK) return request_sysclk(enable); - case PRCMU_PLLSOC1: + else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1)) return request_pll(clock, enable); + else + return -EINVAL; +} + +static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate, + int branch) +{ + u64 rate; + u32 val; + u32 d; + u32 div = 1; + + val = readl(reg); + + rate = src_rate; + rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT); + + d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT); + if (d > 1) + div *= d; + + d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT); + if (d > 1) + div *= d; + + if (val & PRCM_PLL_FREQ_SELDIV2) + div *= 2; + + if ((branch == PLL_FIX) || ((branch == PLL_DIV) && + (val & PRCM_PLL_FREQ_DIV2EN) && + ((reg == PRCM_PLLSOC0_FREQ) || + (reg == PRCM_PLLDDR_FREQ)))) + div *= 2; + + (void)do_div(rate, div); + + return (unsigned long)rate; +} + +#define ROOT_CLOCK_RATE 38400000 + +static unsigned long clock_rate(u8 clock) +{ + u32 val; + u32 pllsw; + unsigned long rate = ROOT_CLOCK_RATE; + + val = readl(clk_mgt[clock].reg); + + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV)) + rate /= 2; + return rate; + } + + val |= clk_mgt[clock].pllsw; + pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK); + + if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0) + rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch); + else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1) + rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch); + else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR) + rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch); + else + return 0; + + if ((clock == PRCMU_SGACLK) && + (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) { + u64 r = (rate * 10); + + (void)do_div(r, 25); + return (unsigned long)r; + } + val &= PRCM_CLK_MGT_CLKPLLDIV_MASK; + if (val) + return rate / val; + else + return 0; +} + +static unsigned long dsiclk_rate(u8 n) +{ + u32 divsel; + u32 div = 1; + + divsel = readl(PRCM_DSI_PLLOUT_SEL); + divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift); + + if (divsel == PRCM_DSI_PLLOUT_SEL_OFF) + divsel = dsiclk[n].divsel; + + switch (divsel) { + case PRCM_DSI_PLLOUT_SEL_PHI_4: + div *= 2; + case PRCM_DSI_PLLOUT_SEL_PHI_2: + div *= 2; + case PRCM_DSI_PLLOUT_SEL_PHI: + return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW) / div; default: - break; + return 0; } +} + +static unsigned long dsiescclk_rate(u8 n) +{ + u32 div; + + div = readl(PRCM_DSITVCLK_DIV); + div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift)); + return clock_rate(PRCMU_TVCLK) / max((u32)1, div); +} + +unsigned long prcmu_clock_rate(u8 clock) +{ if (clock < PRCMU_NUM_REG_CLOCKS) - return request_reg_clock(clock, enable); - return -EINVAL; + return clock_rate(clock); + else if (clock == PRCMU_TIMCLK) + return ROOT_CLOCK_RATE / 16; + else if (clock == PRCMU_SYSCLK) + return ROOT_CLOCK_RATE; + else if (clock == PRCMU_PLLSOC0) + return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLSOC1) + return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLDDR) + return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW); + else if (clock == PRCMU_PLLDSI) + return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return dsiclk_rate(clock - PRCMU_DSI0CLK); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK); + else + return 0; +} + +static unsigned long clock_source_rate(u32 clk_mgt_val, int branch) +{ + if (clk_mgt_val & PRCM_CLK_MGT_CLK38) + return ROOT_CLOCK_RATE; + clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK; + if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0) + return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch); + else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1) + return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch); + else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR) + return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch); + else + return 0; +} + +static u32 clock_divider(unsigned long src_rate, unsigned long rate) +{ + u32 div; + + div = (src_rate / rate); + if (div == 0) + return 1; + if (rate < (src_rate / div)) + div++; + return div; +} + +static long round_clock_rate(u8 clock, unsigned long rate) +{ + u32 val; + u32 div; + unsigned long src_rate; + long rounded_rate; + + val = readl(clk_mgt[clock].reg); + src_rate = clock_source_rate((val | clk_mgt[clock].pllsw), + clk_mgt[clock].branch); + div = clock_divider(src_rate, rate); + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div) { + if (div > 2) + div = 2; + } else { + div = 1; + } + } else if ((clock == PRCMU_SGACLK) && (div == 3)) { + u64 r = (src_rate * 10); + + (void)do_div(r, 25); + if (r <= rate) + return (unsigned long)r; + } + rounded_rate = (src_rate / min(div, (u32)31)); + + return rounded_rate; +} + +#define MIN_PLL_VCO_RATE 600000000ULL +#define MAX_PLL_VCO_RATE 1680640000ULL + +static long round_plldsi_rate(unsigned long rate) +{ + long rounded_rate = 0; + unsigned long src_rate; + unsigned long rem; + u32 r; + + src_rate = clock_rate(PRCMU_HDMICLK); + rem = rate; + + for (r = 7; (rem > 0) && (r > 0); r--) { + u64 d; + + d = (r * rate); + (void)do_div(d, src_rate); + if (d < 6) + d = 6; + else if (d > 255) + d = 255; + d *= src_rate; + if (((2 * d) < (r * MIN_PLL_VCO_RATE)) || + ((r * MAX_PLL_VCO_RATE) < (2 * d))) + continue; + (void)do_div(d, r); + if (rate < d) { + if (rounded_rate == 0) + rounded_rate = (long)d; + break; + } + if ((rate - d) < rem) { + rem = (rate - d); + rounded_rate = (long)d; + } + } + return rounded_rate; +} + +static long round_dsiclk_rate(unsigned long rate) +{ + u32 div; + unsigned long src_rate; + long rounded_rate; + + src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), + PLL_RAW); + div = clock_divider(src_rate, rate); + rounded_rate = (src_rate / ((div > 2) ? 4 : div)); + + return rounded_rate; +} + +static long round_dsiescclk_rate(unsigned long rate) +{ + u32 div; + unsigned long src_rate; + long rounded_rate; + + src_rate = clock_rate(PRCMU_TVCLK); + div = clock_divider(src_rate, rate); + rounded_rate = (src_rate / min(div, (u32)255)); + + return rounded_rate; +} + +long prcmu_round_clock_rate(u8 clock, unsigned long rate) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + return round_clock_rate(clock, rate); + else if (clock == PRCMU_PLLDSI) + return round_plldsi_rate(rate); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + return round_dsiclk_rate(rate); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + return round_dsiescclk_rate(rate); + else + return (long)prcmu_clock_rate(clock); +} + +static void set_clock_rate(u8 clock, unsigned long rate) +{ + u32 val; + u32 div; + unsigned long src_rate; + unsigned long flags; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + val = readl(clk_mgt[clock].reg); + src_rate = clock_source_rate((val | clk_mgt[clock].pllsw), + clk_mgt[clock].branch); + div = clock_divider(src_rate, rate); + if (val & PRCM_CLK_MGT_CLK38) { + if (clk_mgt[clock].clk38div) { + if (div > 1) + val |= PRCM_CLK_MGT_CLK38DIV; + else + val &= ~PRCM_CLK_MGT_CLK38DIV; + } + } else if (clock == PRCMU_SGACLK) { + val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK | + PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN); + if (div == 3) { + u64 r = (src_rate * 10); + + (void)do_div(r, 25); + if (r <= rate) { + val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN; + div = 0; + } + } + val |= min(div, (u32)31); + } else { + val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK; + val |= min(div, (u32)31); + } + writel(val, clk_mgt[clock].reg); + + /* Release the HW semaphore. */ + writel(0, PRCM_SEM); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); +} + +static int set_plldsi_rate(unsigned long rate) +{ + unsigned long src_rate; + unsigned long rem; + u32 pll_freq = 0; + u32 r; + + src_rate = clock_rate(PRCMU_HDMICLK); + rem = rate; + + for (r = 7; (rem > 0) && (r > 0); r--) { + u64 d; + u64 hwrate; + + d = (r * rate); + (void)do_div(d, src_rate); + if (d < 6) + d = 6; + else if (d > 255) + d = 255; + hwrate = (d * src_rate); + if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) || + ((r * MAX_PLL_VCO_RATE) < (2 * hwrate))) + continue; + (void)do_div(hwrate, r); + if (rate < hwrate) { + if (pll_freq == 0) + pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) | + (r << PRCM_PLL_FREQ_R_SHIFT)); + break; + } + if ((rate - hwrate) < rem) { + rem = (rate - hwrate); + pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) | + (r << PRCM_PLL_FREQ_R_SHIFT)); + } + } + if (pll_freq == 0) + return -EINVAL; + + pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT); + writel(pll_freq, PRCM_PLLDSI_FREQ); + + return 0; +} + +static void set_dsiclk_rate(u8 n, unsigned long rate) +{ + u32 val; + u32 div; + + div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ, + clock_rate(PRCMU_HDMICLK), PLL_RAW), rate); + + dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI : + (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 : + /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4; + + val = readl(PRCM_DSI_PLLOUT_SEL); + val &= ~dsiclk[n].divsel_mask; + val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift); + writel(val, PRCM_DSI_PLLOUT_SEL); +} + +static void set_dsiescclk_rate(u8 n, unsigned long rate) +{ + u32 val; + u32 div; + + div = clock_divider(clock_rate(PRCMU_TVCLK), rate); + val = readl(PRCM_DSITVCLK_DIV); + val &= ~dsiescclk[n].div_mask; + val |= (min(div, (u32)255) << dsiescclk[n].div_shift); + writel(val, PRCM_DSITVCLK_DIV); +} + +int prcmu_set_clock_rate(u8 clock, unsigned long rate) +{ + if (clock < PRCMU_NUM_REG_CLOCKS) + set_clock_rate(clock, rate); + else if (clock == PRCMU_PLLDSI) + return set_plldsi_rate(rate); + else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK)) + set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate); + else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK)) + set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate); + return 0; } int db8500_prcmu_config_esram0_deep_sleep(u8 state) @@ -1593,41 +2136,6 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 timeout) (u8)((timeout >> 20) & 0xff)); } -/** - * prcmu_set_clock_divider() - Configure the clock divider. - * @clock: The clock for which the request is made. - * @divider: The clock divider. (< 32) - * - * This function should only be used by the clock implementation. - * Do not use it from any other place! - */ -int prcmu_set_clock_divider(u8 clock, u8 divider) -{ - u32 val; - unsigned long flags; - - if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider)) - return -EINVAL; - - spin_lock_irqsave(&clk_mgt_lock, flags); - - /* Grab the HW semaphore. */ - while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) - cpu_relax(); - - val = readl(_PRCMU_BASE + clk_mgt[clock].offset); - val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK); - val |= (u32)divider; - writel(val, (_PRCMU_BASE + clk_mgt[clock].offset)); - - /* Release the HW semaphore. */ - writel(0, PRCM_SEM); - - spin_unlock_irqrestore(&clk_mgt_lock, flags); - - return 0; -} - /** * prcmu_abb_read() - Read register value(s) from the ABB. * @slave: The I2C slave address. diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index ec22e9f15d3..b9ab4ce6265 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -17,41 +17,41 @@ #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end)) -#define PRCM_SVACLK_MGT_OFF 0x008 -#define PRCM_SIACLK_MGT_OFF 0x00C -#define PRCM_SGACLK_MGT_OFF 0x014 -#define PRCM_UARTCLK_MGT_OFF 0x018 -#define PRCM_MSP02CLK_MGT_OFF 0x01C -#define PRCM_I2CCLK_MGT_OFF 0x020 -#define PRCM_SDMMCCLK_MGT_OFF 0x024 -#define PRCM_SLIMCLK_MGT_OFF 0x028 -#define PRCM_PER1CLK_MGT_OFF 0x02C -#define PRCM_PER2CLK_MGT_OFF 0x030 -#define PRCM_PER3CLK_MGT_OFF 0x034 -#define PRCM_PER5CLK_MGT_OFF 0x038 -#define PRCM_PER6CLK_MGT_OFF 0x03C -#define PRCM_PER7CLK_MGT_OFF 0x040 -#define PRCM_PWMCLK_MGT_OFF 0x044 /* for DB5500 */ -#define PRCM_IRDACLK_MGT_OFF 0x048 /* for DB5500 */ -#define PRCM_IRRCCLK_MGT_OFF 0x04C /* for DB5500 */ -#define PRCM_LCDCLK_MGT_OFF 0x044 -#define PRCM_BMLCLK_MGT_OFF 0x04C -#define PRCM_HSITXCLK_MGT_OFF 0x050 -#define PRCM_HSIRXCLK_MGT_OFF 0x054 -#define PRCM_HDMICLK_MGT_OFF 0x058 -#define PRCM_APEATCLK_MGT_OFF 0x05C -#define PRCM_APETRACECLK_MGT_OFF 0x060 -#define PRCM_MCDECLK_MGT_OFF 0x064 -#define PRCM_IPI2CCLK_MGT_OFF 0x068 -#define PRCM_DSIALTCLK_MGT_OFF 0x06C -#define PRCM_DMACLK_MGT_OFF 0x074 -#define PRCM_B2R2CLK_MGT_OFF 0x078 -#define PRCM_TVCLK_MGT_OFF 0x07C -#define PRCM_UNIPROCLK_MGT_OFF 0x278 -#define PRCM_SSPCLK_MGT_OFF 0x280 -#define PRCM_RNGCLK_MGT_OFF 0x284 -#define PRCM_UICCCLK_MGT_OFF 0x27C -#define PRCM_MSP1CLK_MGT_OFF 0x288 +#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \ + + _offset) +#define PRCM_ACLK_MGT PRCM_CLK_MGT(0x004) +#define PRCM_SVACLK_MGT PRCM_CLK_MGT(0x008) +#define PRCM_SIACLK_MGT PRCM_CLK_MGT(0x00C) +#define PRCM_SGACLK_MGT PRCM_CLK_MGT(0x014) +#define PRCM_UARTCLK_MGT PRCM_CLK_MGT(0x018) +#define PRCM_MSP02CLK_MGT PRCM_CLK_MGT(0x01C) +#define PRCM_I2CCLK_MGT PRCM_CLK_MGT(0x020) +#define PRCM_SDMMCCLK_MGT PRCM_CLK_MGT(0x024) +#define PRCM_SLIMCLK_MGT PRCM_CLK_MGT(0x028) +#define PRCM_PER1CLK_MGT PRCM_CLK_MGT(0x02C) +#define PRCM_PER2CLK_MGT PRCM_CLK_MGT(0x030) +#define PRCM_PER3CLK_MGT PRCM_CLK_MGT(0x034) +#define PRCM_PER5CLK_MGT PRCM_CLK_MGT(0x038) +#define PRCM_PER6CLK_MGT PRCM_CLK_MGT(0x03C) +#define PRCM_PER7CLK_MGT PRCM_CLK_MGT(0x040) +#define PRCM_LCDCLK_MGT PRCM_CLK_MGT(0x044) +#define PRCM_BMLCLK_MGT PRCM_CLK_MGT(0x04C) +#define PRCM_HSITXCLK_MGT PRCM_CLK_MGT(0x050) +#define PRCM_HSIRXCLK_MGT PRCM_CLK_MGT(0x054) +#define PRCM_HDMICLK_MGT PRCM_CLK_MGT(0x058) +#define PRCM_APEATCLK_MGT PRCM_CLK_MGT(0x05C) +#define PRCM_APETRACECLK_MGT PRCM_CLK_MGT(0x060) +#define PRCM_MCDECLK_MGT PRCM_CLK_MGT(0x064) +#define PRCM_IPI2CCLK_MGT PRCM_CLK_MGT(0x068) +#define PRCM_DSIALTCLK_MGT PRCM_CLK_MGT(0x06C) +#define PRCM_DMACLK_MGT PRCM_CLK_MGT(0x074) +#define PRCM_B2R2CLK_MGT PRCM_CLK_MGT(0x078) +#define PRCM_TVCLK_MGT PRCM_CLK_MGT(0x07C) +#define PRCM_UNIPROCLK_MGT PRCM_CLK_MGT(0x278) +#define PRCM_SSPCLK_MGT PRCM_CLK_MGT(0x280) +#define PRCM_RNGCLK_MGT PRCM_CLK_MGT(0x284) +#define PRCM_UICCCLK_MGT PRCM_CLK_MGT(0x27C) +#define PRCM_MSP1CLK_MGT PRCM_CLK_MGT(0x288) #define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f @@ -131,20 +131,58 @@ #define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) #define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) +#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP BIT(11) +#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI BIT(22) + /* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080) +#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084) +#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C) +#define PRCM_PLL_FREQ_D_SHIFT 0 +#define PRCM_PLL_FREQ_D_MASK BITS(0, 7) +#define PRCM_PLL_FREQ_N_SHIFT 8 +#define PRCM_PLL_FREQ_N_MASK BITS(8, 13) +#define PRCM_PLL_FREQ_R_SHIFT 16 +#define PRCM_PLL_FREQ_R_MASK BITS(16, 18) +#define PRCM_PLL_FREQ_SELDIV2 BIT(24) +#define PRCM_PLL_FREQ_DIV2EN BIT(25) + #define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) #define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF) #define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) #define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) #define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508) #define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) #define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) +#define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0) + +#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 BIT(0) +#define PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3 BIT(1) + +#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT 0 +#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK BITS(0, 2) +#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT 8 +#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK BITS(8, 10) + +#define PRCM_DSI_PLLOUT_SEL_OFF 0 +#define PRCM_DSI_PLLOUT_SEL_PHI 1 +#define PRCM_DSI_PLLOUT_SEL_PHI_2 2 +#define PRCM_DSI_PLLOUT_SEL_PHI_4 3 + +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT 0 +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK BITS(0, 7) +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT 8 +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK BITS(8, 15) +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT 16 +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK BITS(16, 23) +#define PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN BIT(24) +#define PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN BIT(25) +#define PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN BIT(26) + +#define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14) + #define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC) #define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0) #define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13) @@ -183,9 +221,15 @@ #define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24) #define PRCM_CLKOCR_CLK1TYPE BIT(28) -#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) -#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) -#define PRCM_CLK_MGT_CLKEN BIT(8) +#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4) +#define PRCM_CLK_MGT_CLKPLLSW_SOC0 BIT(5) +#define PRCM_CLK_MGT_CLKPLLSW_SOC1 BIT(6) +#define PRCM_CLK_MGT_CLKPLLSW_DDR BIT(7) +#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7) +#define PRCM_CLK_MGT_CLKEN BIT(8) +#define PRCM_CLK_MGT_CLK38 BIT(9) +#define PRCM_CLK_MGT_CLK38DIV BIT(11) +#define PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN BIT(12) /* GPIOCR register */ #define PRCM_GPIOCR_SPI2_SELECT BIT(23) diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index f73b9d9d2a2..8470c7d7121 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -80,6 +80,29 @@ enum prcmu_wakeup_index { #define EPOD_STATE_ON_CLK_OFF 0x03 #define EPOD_STATE_ON 0x04 +/* DB5500 CLKOUT IDs */ +enum { + DB5500_CLKOUT0 = 0, + DB5500_CLKOUT1, +}; + +/* DB5500 CLKOUTx sources */ +enum { + DB5500_CLKOUT_REF_CLK_SEL0, + DB5500_CLKOUT_RTC_CLK0_SEL0, + DB5500_CLKOUT_ULP_CLK_SEL0, + DB5500_CLKOUT_STATIC0, + DB5500_CLKOUT_REFCLK, + DB5500_CLKOUT_ULPCLK, + DB5500_CLKOUT_ARMCLK, + DB5500_CLKOUT_SYSACC0CLK, + DB5500_CLKOUT_SOC0PLLCLK, + DB5500_CLKOUT_SOC1PLLCLK, + DB5500_CLKOUT_DDRPLLCLK, + DB5500_CLKOUT_TVCLK, + DB5500_CLKOUT_IRDACLK, +}; + /* * CLKOUT sources */ @@ -111,6 +134,7 @@ enum prcmu_clock { PRCMU_MSP1CLK, PRCMU_I2CCLK, PRCMU_SDMMCCLK, + PRCMU_SPARE1CLK, PRCMU_SLIMCLK, PRCMU_PER1CLK, PRCMU_PER2CLK, @@ -139,12 +163,20 @@ enum prcmu_clock { PRCMU_IRRCCLK, PRCMU_SIACLK, PRCMU_SVACLK, + PRCMU_ACLK, PRCMU_NUM_REG_CLOCKS, PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, + PRCMU_CDCLK, PRCMU_TIMCLK, PRCMU_PLLSOC0, PRCMU_PLLSOC1, PRCMU_PLLDDR, + PRCMU_PLLDSI, + PRCMU_DSI0CLK, + PRCMU_DSI1CLK, + PRCMU_DSI0ESCCLK, + PRCMU_DSI1ESCCLK, + PRCMU_DSI2ESCCLK, }; /** @@ -516,6 +548,21 @@ static inline int prcmu_request_clock(u8 clock, bool enable) return 0; } +static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate) +{ + return 0; +} + +static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate) +{ + return 0; +} + +static inline unsigned long prcmu_clock_rate(u8 clock) +{ + return 0; +} + static inline int prcmu_set_ape_opp(u8 opp) { return 0; -- cgit v1.2.3-70-g09d2 From 4d64d2e34bc415b05eb77a2732a3164313cf6de3 Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Fri, 13 Jan 2012 16:20:43 +0100 Subject: mfd: db8500 OPP and sleep handling update This updates the operating point handling code by: - Supporting the DDR OPP retention state. - Supporting another low operating point named APE_50_PARTLY_25_OPP - Adding an interface to figure out if the sleep state change was properly achieved. Signed-off-by: Shreshtha Kumar Sahu Signed-off-by: Rabin Vincent Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 73 +++++++++++++++++++++++++++++++++++++++- include/linux/mfd/db8500-prcmu.h | 25 ++++++++++++++ include/linux/mfd/dbx500-prcmu.h | 15 +++++++-- 3 files changed, 110 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 13856392cb2..8056968da20 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -343,11 +343,13 @@ static struct { * mb1_transfer - state needed for mailbox 1 communication. * @lock: The transaction lock. * @work: The transaction completion structure. + * @ape_opp: The current APE OPP. * @ack: Reply ("acknowledge") data. */ static struct { struct mutex lock; struct completion work; + u8 ape_opp; struct { u8 header; u8 arm_opp; @@ -816,6 +818,11 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) return 0; } +u8 db8500_prcmu_get_power_state_result(void) +{ + return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS); +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { @@ -965,6 +972,52 @@ int db8500_prcmu_set_ddr_opp(u8 opp) return 0; } +/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */ +static void request_even_slower_clocks(bool enable) +{ + void __iomem *clock_reg[] = { + PRCM_ACLK_MGT, + PRCM_DMACLK_MGT + }; + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&clk_mgt_lock, flags); + + /* Grab the HW semaphore. */ + while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0) + cpu_relax(); + + for (i = 0; i < ARRAY_SIZE(clock_reg); i++) { + u32 val; + u32 div; + + val = readl(clock_reg[i]); + div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK); + if (enable) { + if ((div <= 1) || (div > 15)) { + pr_err("prcmu: Bad clock divider %d in %s\n", + div, __func__); + goto unlock_and_return; + } + div <<= 1; + } else { + if (div <= 2) + goto unlock_and_return; + div >>= 1; + } + val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) | + (div & PRCM_CLK_MGT_CLKPLLDIV_MASK)); + writel(val, clock_reg[i]); + } + +unlock_and_return: + /* Release the HW semaphore. */ + writel(0, PRCM_SEM); + + spin_unlock_irqrestore(&clk_mgt_lock, flags); +} + /** * db8500_set_ape_opp - set the appropriate APE OPP * @opp: The new APE operating point to which transition is to be made @@ -976,14 +1029,24 @@ int db8500_prcmu_set_ape_opp(u8 opp) { int r = 0; + if (opp == mb1_transfer.ape_opp) + return 0; + mutex_lock(&mb1_transfer.lock); + if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP) + request_even_slower_clocks(false); + + if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP)) + goto skip_message; + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) cpu_relax(); writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1)); writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP)); - writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP)); + writeb(((opp == APE_50_PARTLY_25_OPP) ? APE_50_OPP : opp), + (tcdm_base + PRCM_REQ_MB1_APE_OPP)); writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); wait_for_completion(&mb1_transfer.work); @@ -992,6 +1055,13 @@ int db8500_prcmu_set_ape_opp(u8 opp) (mb1_transfer.ack.ape_opp != opp)) r = -EIO; +skip_message: + if ((!r && (opp == APE_50_PARTLY_25_OPP)) || + (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP))) + request_even_slower_clocks(true); + if (!r) + mb1_transfer.ape_opp = opp; + mutex_unlock(&mb1_transfer.lock); return r; @@ -2631,6 +2701,7 @@ void __init db8500_prcmu_early_init(void) init_completion(&mb0_transfer.ac_wake_work); mutex_init(&mb1_transfer.lock); init_completion(&mb1_transfer.work); + mb1_transfer.ape_opp = APE_NO_CHANGE; mutex_init(&mb2_transfer.lock); init_completion(&mb2_transfer.work); spin_lock_init(&mb2_transfer.auto_pm_lock); diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index c5028f1246f..841342c5545 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -457,6 +457,25 @@ enum hw_acc_dev { NUM_HW_ACC }; +/** + * enum prcmu_power_status - results from set_power_state + * @PRCMU_SLEEP_OK: Sleep went ok + * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok + * @PRCMU_IDLE_OK: Idle went ok + * @PRCMU_DEEPIDLE_OK: DeepIdle went ok + * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected + * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected + * + */ +enum prcmu_power_status { + PRCMU_SLEEP_OK = 0xf3, + PRCMU_DEEP_SLEEP_OK = 0xf6, + PRCMU_IDLE_OK = 0xf0, + PRCMU_DEEPIDLE_OK = 0xe3, + PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91, + PRCMU_ARMPENDINGIT_ER = 0x93, +}; + /* * Definitions for autonomous power management configuration. */ @@ -544,6 +563,7 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); +u8 db8500_prcmu_get_power_state_result(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); @@ -699,6 +719,11 @@ static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, return 0; } +static inline u8 db8500_prcmu_get_power_state_result(void) +{ + return 0; +} + static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {} static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state) diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 8470c7d7121..432a2d3fc19 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -185,12 +185,14 @@ enum prcmu_clock { * @APE_NO_CHANGE: The APE operating point is unchanged * @APE_100_OPP: The new APE operating point is ape100opp * @APE_50_OPP: 50% + * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%. */ enum ape_opp { APE_OPP_INIT = 0x00, APE_NO_CHANGE = 0x01, APE_100_OPP = 0x02, - APE_50_OPP = 0x03 + APE_50_OPP = 0x03, + APE_50_PARTLY_25_OPP = 0xFF, }; /** @@ -271,6 +273,14 @@ static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, keep_ap_pll); } +static inline u8 prcmu_get_power_state_result(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_get_power_state_result(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { if (cpu_is_u5500()) @@ -663,9 +673,10 @@ static inline int prcmu_stop_temp_sense(void) /* PRCMU QoS APE OPP class */ #define PRCMU_QOS_APE_OPP 1 #define PRCMU_QOS_DDR_OPP 2 +#define PRCMU_QOS_ARM_OPP 3 #define PRCMU_QOS_DEFAULT_VALUE -1 -#ifdef CONFIG_UX500_PRCMU_QOS_POWER +#ifdef CONFIG_DBX500_PRCMU_QOS_POWER unsigned long prcmu_qos_get_cpufreq_opp_delay(void); void prcmu_qos_set_cpufreq_opp_delay(unsigned long); -- cgit v1.2.3-70-g09d2 From b4a6dbd5b7bad00ee4004443287468abddb96538 Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Fri, 13 Jan 2012 16:21:00 +0100 Subject: mfd: Add initial db8500 prcmu register access api This patch adds an initial PRCMU register access API, which for now should only be used for a very limited set of registers. The idea about this API is that we split the PRCMU driver in one part that deals with interaction with the PRCMU firmware and one part that simply provide write accessors in the PRCMU register range. The latter are just a collection of registers exposed in the PRCMU register range for various purposes and not related to the PRCMU firmware. Currently we support some limited GPIO, SPI and UART settings through this API. Signed-off-by: Mattias Nilsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 36 ++++++------ include/linux/mfd/db8500-prcmu.h | 44 ++++++++++---- include/linux/mfd/dbx500-prcmu.h | 122 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+), 31 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 0ee801582d8..128b5f4a4fb 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -417,8 +417,8 @@ static struct { static atomic_t ac_wake_req_state = ATOMIC_INIT(0); /* Spinlocks */ +static DEFINE_SPINLOCK(prcmu_lock); static DEFINE_SPINLOCK(clkout_lock); -static DEFINE_SPINLOCK(gpiocr_lock); /* Global var to runtime determine TCDM base for v2 or v1 */ static __iomem void *tcdm_base; @@ -639,32 +639,30 @@ int db8500_prcmu_set_display_clocks(void) return 0; } -/** - * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. - */ -void prcmu_enable_spi2(void) +u32 db8500_prcmu_read(unsigned int reg) +{ + return readl(_PRCMU_BASE + reg); +} + +void db8500_prcmu_write(unsigned int reg, u32 value) { - u32 reg; unsigned long flags; - spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(PRCM_GPIOCR); - writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); - spin_unlock_irqrestore(&gpiocr_lock, flags); + spin_lock_irqsave(&prcmu_lock, flags); + writel(value, (_PRCMU_BASE + reg)); + spin_unlock_irqrestore(&prcmu_lock, flags); } -/** - * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. - */ -void prcmu_disable_spi2(void) +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value) { - u32 reg; + u32 val; unsigned long flags; - spin_lock_irqsave(&gpiocr_lock, flags); - reg = readl(PRCM_GPIOCR); - writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR); - spin_unlock_irqrestore(&gpiocr_lock, flags); + spin_lock_irqsave(&prcmu_lock, flags); + val = readl(_PRCMU_BASE + reg); + val = ((val & ~mask) | (value & mask)); + writel(val, (_PRCMU_BASE + reg)); + spin_unlock_irqrestore(&prcmu_lock, flags); } struct prcmu_fw_version *prcmu_get_fw_version(void) diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 841342c5545..636423bd511 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -11,6 +11,24 @@ #define __MFD_DB8500_PRCMU_H #include +#include + +/* + * Registers + */ +#define DB8500_PRCM_GPIOCR 0x138 +#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0) +#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9) +#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11) +#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23) + +#define DB8500_PRCM_LINE_VALUE 0x170 +#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3) + +#define DB8500_PRCM_DSI_SW_RESET 0x324 +#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0) +#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1) +#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2) /* This portion previously known as */ @@ -552,8 +570,6 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); void db8500_prcmu_modem_reset(void); -void prcmu_enable_spi2(void); -void prcmu_disable_spi2(void); int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off); int db8500_prcmu_enable_a9wdog(u8 id); @@ -582,6 +598,10 @@ int db8500_prcmu_get_ape_opp(void); int db8500_prcmu_set_ddr_opp(u8 opp); int db8500_prcmu_get_ddr_opp(void); +u32 db8500_prcmu_read(unsigned int reg); +void db8500_prcmu_write(unsigned int reg, u32 value); +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value); + #else /* !CONFIG_MFD_DB8500_PRCMU */ static inline void db8500_prcmu_early_init(void) {} @@ -703,16 +723,6 @@ static inline void db8500_prcmu_modem_reset(void) {} static inline void db8500_prcmu_system_reset(u16 reset_code) {} -static inline int prcmu_enable_spi2(void) -{ - return 0; -} - -static inline int prcmu_disable_spi2(void) -{ - return 0; -} - static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { @@ -805,6 +815,16 @@ static inline int db8500_prcmu_get_arm_opp(void) return 0; } +static inline u32 db8500_prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void db8500_prcmu_write(unsigned int reg, u32 value) {} + +static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask, + u32 value) {} + #endif /* !CONFIG_MFD_DB8500_PRCMU */ #endif /* __MFD_DB8500_PRCMU_H */ diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 432a2d3fc19..b3b5adfa9e4 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -480,6 +480,30 @@ static inline int prcmu_stop_temp_sense(void) return db8500_prcmu_stop_temp_sense(); } +static inline u32 prcmu_read(unsigned int reg) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_read(reg); +} + +static inline void prcmu_write(unsigned int reg, u32 value) +{ + if (cpu_is_u5500()) + return; + else + db8500_prcmu_write(reg, value); +} + +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) +{ + if (cpu_is_u5500()) + return; + else + db8500_prcmu_write_masked(reg, mask, value); +} + static inline int prcmu_enable_a9wdog(u8 id) { if (cpu_is_u5500()) @@ -668,6 +692,104 @@ static inline int prcmu_stop_temp_sense(void) return 0; } +static inline u32 prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void prcmu_write(unsigned int reg, u32 value) {} + +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {} + +#endif + +static inline void prcmu_set(unsigned int reg, u32 bits) +{ + prcmu_write_masked(reg, bits, bits); +} + +static inline void prcmu_clear(unsigned int reg, u32 bits) +{ + prcmu_write_masked(reg, bits, 0); +} + +#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) + +/** + * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. + */ +static inline void prcmu_enable_spi2(void) +{ + if (cpu_is_u8500()) + prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT); +} + +/** + * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1. + */ +static inline void prcmu_disable_spi2(void) +{ + if (cpu_is_u8500()) + prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT); +} + +/** + * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD + * and UARTMOD on OtherAlternateC3. + */ +static inline void prcmu_enable_stm_mod_uart(void) +{ + if (cpu_is_u8500()) { + prcmu_set(DB8500_PRCM_GPIOCR, + (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 | + DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0)); + } +} + +/** + * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD + * and UARTMOD on OtherAlternateC3. + */ +static inline void prcmu_disable_stm_mod_uart(void) +{ + if (cpu_is_u8500()) { + prcmu_clear(DB8500_PRCM_GPIOCR, + (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 | + DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0)); + } +} + +/** + * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1. + */ +static inline void prcmu_enable_stm_ape(void) +{ + if (cpu_is_u8500()) { + prcmu_set(DB8500_PRCM_GPIOCR, + DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD); + } +} + +/** + * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1. + */ +static inline void prcmu_disable_stm_ape(void) +{ + if (cpu_is_u8500()) { + prcmu_clear(DB8500_PRCM_GPIOCR, + DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD); + } +} + +#else + +static inline void prcmu_enable_spi2(void) {} +static inline void prcmu_disable_spi2(void) {} +static inline void prcmu_enable_stm_mod_uart(void) {} +static inline void prcmu_disable_stm_mod_uart(void) {} +static inline void prcmu_enable_stm_ape(void) {} +static inline void prcmu_disable_stm_ape(void) {} + #endif /* PRCMU QoS APE OPP class */ -- cgit v1.2.3-70-g09d2 From e31f9b826486c48f20e4f1066aa3e23e111c3a4e Mon Sep 17 00:00:00 2001 From: Chris Blair Date: Thu, 26 Jan 2012 22:17:03 +0100 Subject: mfd: Add support for no-interrupt stmpe config Adds support for boards which have an STMPE device without the interrupt pin connected. Acked-by: Viresh Kumar Signed-off-by: Chris Blair Tested-by: Michel Jaouen Reviewed-by: Srinidhi Kasagar Signed-off-by: Linus Walleij Acked-by: Viresh Kumar Signed-off-by: Samuel Ortiz --- drivers/mfd/stmpe.c | 134 +++++++++++++++++++++++++++++++++------------- include/linux/mfd/stmpe.h | 1 + 2 files changed, 97 insertions(+), 38 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index e07947e56b2..2dd8d49cb30 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -298,6 +298,11 @@ static struct mfd_cell stmpe_gpio_cell = { .num_resources = ARRAY_SIZE(stmpe_gpio_resources), }; +static struct mfd_cell stmpe_gpio_cell_noirq = { + .name = "stmpe-gpio", + /* gpio cell resources consist of an irq only so no resources here */ +}; + /* * Keypad (1601, 2401, 2403) */ @@ -346,6 +351,13 @@ static struct stmpe_variant_block stmpe801_blocks[] = { }, }; +static struct stmpe_variant_block stmpe801_blocks_noirq[] = { + { + .cell = &stmpe_gpio_cell_noirq, + .block = STMPE_BLOCK_GPIO, + }, +}; + static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks, bool enable) { @@ -367,6 +379,17 @@ static struct stmpe_variant_info stmpe801 = { .enable = stmpe801_enable, }; +static struct stmpe_variant_info stmpe801_noirq = { + .name = "stmpe801", + .id_val = STMPE801_ID, + .id_mask = 0xffff, + .num_gpios = 8, + .regs = stmpe801_regs, + .blocks = stmpe801_blocks_noirq, + .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq), + .enable = stmpe801_enable, +}; + /* * Touchscreen (STMPE811 or STMPE610) */ @@ -712,7 +735,7 @@ static struct stmpe_variant_info stmpe2403 = { .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */ }; -static struct stmpe_variant_info *stmpe_variant_info[] = { +static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { [STMPE610] = &stmpe610, [STMPE801] = &stmpe801, [STMPE811] = &stmpe811, @@ -721,6 +744,16 @@ static struct stmpe_variant_info *stmpe_variant_info[] = { [STMPE2403] = &stmpe2403, }; +/* + * These devices can be connected in a 'no-irq' configuration - the irq pin + * is not used and the device cannot interrupt the CPU. Here we only list + * devices which support this configuration - the driver will fail probing + * for any devices not listed here which are configured in this way. + */ +static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = { + [STMPE801] = &stmpe801_noirq, +}; + static irqreturn_t stmpe_irq(int irq, void *data) { struct stmpe *stmpe = data; @@ -864,7 +897,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) unsigned int irq_trigger = stmpe->pdata->irq_trigger; int autosleep_timeout = stmpe->pdata->autosleep_timeout; struct stmpe_variant_info *variant = stmpe->variant; - u8 icr; + u8 icr = 0; unsigned int id; u8 data[2]; int ret; @@ -887,31 +920,33 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe) if (ret) return ret; - if (id == STMPE801_ID) - icr = STMPE801_REG_SYS_CTRL_INT_EN; - else - icr = STMPE_ICR_LSB_GIM; - - /* STMPE801 doesn't support Edge interrupts */ - if (id != STMPE801_ID) { - if (irq_trigger == IRQF_TRIGGER_FALLING || - irq_trigger == IRQF_TRIGGER_RISING) - icr |= STMPE_ICR_LSB_EDGE; - } - - if (irq_trigger == IRQF_TRIGGER_RISING || - irq_trigger == IRQF_TRIGGER_HIGH) { + if (stmpe->irq >= 0) { if (id == STMPE801_ID) - icr |= STMPE801_REG_SYS_CTRL_INT_HI; + icr = STMPE801_REG_SYS_CTRL_INT_EN; else - icr |= STMPE_ICR_LSB_HIGH; - } + icr = STMPE_ICR_LSB_GIM; - if (stmpe->pdata->irq_invert_polarity) { - if (id == STMPE801_ID) - icr ^= STMPE801_REG_SYS_CTRL_INT_HI; - else - icr ^= STMPE_ICR_LSB_HIGH; + /* STMPE801 doesn't support Edge interrupts */ + if (id != STMPE801_ID) { + if (irq_trigger == IRQF_TRIGGER_FALLING || + irq_trigger == IRQF_TRIGGER_RISING) + icr |= STMPE_ICR_LSB_EDGE; + } + + if (irq_trigger == IRQF_TRIGGER_RISING || + irq_trigger == IRQF_TRIGGER_HIGH) { + if (id == STMPE801_ID) + icr |= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr |= STMPE_ICR_LSB_HIGH; + } + + if (stmpe->pdata->irq_invert_polarity) { + if (id == STMPE801_ID) + icr ^= STMPE801_REG_SYS_CTRL_INT_HI; + else + icr ^= STMPE_ICR_LSB_HIGH; + } } if (stmpe->pdata->autosleep) { @@ -1001,19 +1036,38 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) stmpe->irq = ci->irq; } + if (stmpe->irq < 0) { + /* use alternate variant info for no-irq mode, if supported */ + dev_info(stmpe->dev, + "%s configured in no-irq mode by platform data\n", + stmpe->variant->name); + if (!stmpe_noirq_variant_info[stmpe->partnum]) { + dev_err(stmpe->dev, + "%s does not support no-irq mode!\n", + stmpe->variant->name); + ret = -ENODEV; + goto free_gpio; + } + stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum]; + } + ret = stmpe_chip_init(stmpe); if (ret) goto free_gpio; - ret = stmpe_irq_init(stmpe); - if (ret) - goto free_gpio; + if (stmpe->irq >= 0) { + ret = stmpe_irq_init(stmpe); + if (ret) + goto free_gpio; - ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, - pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe); - if (ret) { - dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret); - goto out_removeirq; + ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq, + pdata->irq_trigger | IRQF_ONESHOT, + "stmpe", stmpe); + if (ret) { + dev_err(stmpe->dev, "failed to request IRQ: %d\n", + ret); + goto out_removeirq; + } } ret = stmpe_devices_init(stmpe); @@ -1026,9 +1080,11 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum) out_removedevs: mfd_remove_devices(stmpe->dev); - free_irq(stmpe->irq, stmpe); + if (stmpe->irq >= 0) + free_irq(stmpe->irq, stmpe); out_removeirq: - stmpe_irq_remove(stmpe); + if (stmpe->irq >= 0) + stmpe_irq_remove(stmpe); free_gpio: if (pdata->irq_over_gpio) gpio_free(pdata->irq_gpio); @@ -1041,8 +1097,10 @@ int stmpe_remove(struct stmpe *stmpe) { mfd_remove_devices(stmpe->dev); - free_irq(stmpe->irq, stmpe); - stmpe_irq_remove(stmpe); + if (stmpe->irq >= 0) { + free_irq(stmpe->irq, stmpe); + stmpe_irq_remove(stmpe); + } if (stmpe->pdata->irq_over_gpio) gpio_free(stmpe->pdata->irq_gpio); @@ -1057,7 +1115,7 @@ static int stmpe_suspend(struct device *dev) { struct stmpe *stmpe = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (stmpe->irq >= 0 && device_may_wakeup(dev)) enable_irq_wake(stmpe->irq); return 0; @@ -1067,7 +1125,7 @@ static int stmpe_resume(struct device *dev) { struct stmpe *stmpe = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) + if (stmpe->irq >= 0 && device_may_wakeup(dev)) disable_irq_wake(stmpe->irq); return 0; diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index ca1d7a34760..a1c6aa72cc7 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -26,6 +26,7 @@ enum stmpe_partnum { STMPE1601, STMPE2401, STMPE2403, + STMPE_NBR_PARTS }; /* -- cgit v1.2.3-70-g09d2 From 0f620837595145cd42be1c9dc6b619146fbeaf88 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 20 Feb 2012 21:42:10 +0100 Subject: mfd: Add ab8500 version detection and enforcing There are currently four different versions of the AB8500 around: AB8500, AB8505, AB9540 and AB8540. Unfortunately: - Some of the chips (AB8500, AB8505, AB9540) cannot read the AB8500_REV_REG register but return errors - Some of them have the same ID value in the hardware register AB8500_REV_REV, for example the first versions of AB8505 and AB9540 have 0xFF in this register - just like the AB8500. So we need to be able to enforce a certain version from the platform. We do this by using the id of the platform device that provides the read/write functions. Reviewed-by: Mark Brown Signed-off-by: Maxime Coquelin Signed-off-by: Alex Macro Signed-off-by: Michel Jaouen Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 63 ++++++++++++++++++++++++++------------- drivers/mfd/ab8500-i2c.c | 15 ++++++++-- include/linux/mfd/abx500.h | 7 ----- include/linux/mfd/abx500/ab8500.h | 59 +++++++++++++++++++++++++++++++++++- 4 files changed, 113 insertions(+), 31 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index d295941c9a3..3547eee21aa 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -90,6 +90,7 @@ #define AB8500_IT_MASK24_REG 0x57 #define AB8500_REV_REG 0x80 +#define AB8500_IC_NAME_REG 0x82 #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 @@ -105,6 +106,13 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; +static const char ab8500_version_str[][7] = { + [AB8500_VERSION_AB8500] = "AB8500", + [AB8500_VERSION_AB8505] = "AB8505", + [AB8500_VERSION_AB9540] = "AB9540", + [AB8500_VERSION_AB8540] = "AB8540", +}; + static int ab8500_get_chip_id(struct device *dev) { struct ab8500 *ab8500; @@ -256,9 +264,12 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) if (new == old) continue; - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (ab8500_irq_regoffset[i] == 11 && - ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (ab8500->irq_reg_offset[i] == 11 && + is_ab8500_1p1_or_earlier(ab8500)) continue; ab8500->oldmask[i] = new; @@ -311,8 +322,11 @@ static irqreturn_t ab8500_irq(int irq, void *dev) int status; u8 value; - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (regoffset == 11 && ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500)) continue; status = get_register_interruptible(ab8500, AB8500_INTERRUPT, @@ -857,7 +871,7 @@ static struct attribute_group ab8500_attr_group = { .attrs = ab8500_sysfs_entries, }; -int __devinit ab8500_init(struct ab8500 *ab8500) +int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) { struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); int ret; @@ -870,25 +884,29 @@ int __devinit ab8500_init(struct ab8500 *ab8500) mutex_init(&ab8500->lock); mutex_init(&ab8500->irq_lock); + if (version != AB8500_VERSION_UNDEFINED) + ab8500->version = version; + else { + ret = get_register_interruptible(ab8500, AB8500_MISC, + AB8500_IC_NAME_REG, &value); + if (ret < 0) + return ret; + + ab8500->version = value; + } + ret = get_register_interruptible(ab8500, AB8500_MISC, AB8500_REV_REG, &value); if (ret < 0) return ret; - switch (value) { - case AB8500_CUT1P0: - case AB8500_CUT1P1: - case AB8500_CUT2P0: - case AB8500_CUT3P0: - case AB8500_CUT3P3: - dev_info(ab8500->dev, "detected chip, revision: %#x\n", value); - break; - default: - dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value); - return -EINVAL; - } ab8500->chip_id = value; + dev_info(ab8500->dev, "detected chip, %s rev. %1x.%1x\n", + ab8500_version_str[ab8500->version], + ab8500->chip_id >> 4, + ab8500->chip_id & 0x0F); + /* * ab8500 has switched off due to (SWITCH_OFF_STATUS): * 0x01 Swoff bit programming @@ -912,9 +930,12 @@ int __devinit ab8500_init(struct ab8500 *ab8500) /* Clear and mask all interrupts */ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { - /* Interrupt register 12 doesn't exist prior to version 2.0 */ - if (ab8500_irq_regoffset[i] == 11 && - ab8500->chip_id < AB8500_CUT2P0) + /* + * Interrupt register 12 doesn't exist prior to AB8500 version + * 2.0 + */ + if (ab8500->irq_reg_offset[i] == 11 && + is_ab8500_1p1_or_earlier(ab8500)) continue; get_register_interruptible(ab8500, AB8500_INTERRUPT, diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 087fecd71ce..70a16ae856a 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -38,6 +38,7 @@ static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) static int __devinit ab8500_i2c_probe(struct platform_device *plf) { + const struct platform_device_id *platid = platform_get_device_id(plf); struct ab8500 *ab8500; struct resource *resource; int ret; @@ -61,10 +62,11 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf) platform_set_drvdata(plf, ab8500); - ret = ab8500_init(ab8500); + ret = ab8500_init(ab8500, platid->driver_data); if (ret) kfree(ab8500); + return ret; } @@ -78,13 +80,22 @@ static int __devexit ab8500_i2c_remove(struct platform_device *plf) return 0; } +static const struct platform_device_id ab8500_id[] = { + { "ab8500-i2c", AB8500_VERSION_AB8500 }, + { "ab8505-i2c", AB8500_VERSION_AB8505 }, + { "ab9540-i2c", AB8500_VERSION_AB9540 }, + { "ab8540-i2c", AB8500_VERSION_AB8540 }, + { } +}; + static struct platform_driver ab8500_i2c_driver = { .driver = { .name = "ab8500-i2c", .owner = THIS_MODULE, }, .probe = ab8500_i2c_probe, - .remove = __devexit_p(ab8500_i2c_remove) + .remove = __devexit_p(ab8500_i2c_remove), + .id_table = ab8500_id, }; static int __init ab8500_i2c_init(void) diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 9970337ff04..1bfbb113a85 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -33,13 +33,6 @@ #define AB5500_1_1 0x21 #define AB5500_2_0 0x24 -/* AB8500 CIDs*/ -#define AB8500_CUT1P0 0x10 -#define AB8500_CUT1P1 0x11 -#define AB8500_CUT2P0 0x20 -#define AB8500_CUT3P0 0x30 -#define AB8500_CUT3P3 0x33 - /* * AB3100, EVENTA1, A2 and A3 event register flags * these are catenated into a single 32-bit flag in the code diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 838c6b487cc..79892585c08 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -8,6 +8,28 @@ #define MFD_AB8500_H #include +/* + * AB IC versions + * + * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a + * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the + * print of version string. + */ +enum ab8500_version { + AB8500_VERSION_AB8500 = 0x0, + AB8500_VERSION_AB8505 = 0x1, + AB8500_VERSION_AB9540 = 0x2, + AB8500_VERSION_AB8540 = 0x3, + AB8500_VERSION_UNDEFINED, +}; + +/* AB8500 CIDs*/ +#define AB8500_CUTEARLY 0x00 +#define AB8500_CUT1P0 0x10 +#define AB8500_CUT1P1 0x11 +#define AB8500_CUT2P0 0x20 +#define AB8500_CUT3P0 0x30 +#define AB8500_CUT3P3 0x33 /* * AB8500 bank addresses @@ -145,6 +167,7 @@ * @lock: read/write operations lock * @irq_lock: genirq bus lock * @irq: irq line + * @version: chip version id (e.g. ab8500 or ab9540) * @chip_id: chip revision id * @write: register write * @read: register read @@ -160,6 +183,7 @@ struct ab8500 { int irq_base; int irq; + enum ab8500_version version; u8 chip_id; int (*write) (struct ab8500 *a8500, u16 addr, u8 data); @@ -195,7 +219,40 @@ struct ab8500_platform_data { struct ab8500_gpio_platform_data *gpio; }; -extern int __devinit ab8500_init(struct ab8500 *ab8500); +extern int __devinit ab8500_init(struct ab8500 *ab8500, + enum ab8500_version version); extern int __devexit ab8500_exit(struct ab8500 *ab8500); +static inline int is_ab8500(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8500; +} + +static inline int is_ab8505(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8505; +} + +static inline int is_ab9540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB9540; +} + +static inline int is_ab8540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8540; +} + +/* include also ab8505, ab9540... */ +static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1)); +} + +/* include also ab8505, ab9540... */ +static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0)); +} + #endif /* MFD_AB8500_H */ -- cgit v1.2.3-70-g09d2 From 2ced445e2ddf65f484a489161accddf475676965 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 20 Feb 2012 21:42:17 +0100 Subject: mfd: Parametrize ab8500 IRQ masks and registers This makes the AB8500 state struct contain the IRQ mask and register offsets previously hard-coded so as to make room for more AB8500 variants. Reviewed-by: Mark Brown Signed-off-by: Maxime Coquelin Signed-off-by: Alex Macro Signed-off-by: Michel Jaouen Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 50 +++++++++++++++++++++++++++++---------- include/linux/mfd/abx500/ab8500.h | 9 +++++-- 2 files changed, 44 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 3547eee21aa..73907ad1e3d 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -97,11 +97,13 @@ /* * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt - * numbers are indexed into this array with (num / 8). + * numbers are indexed into this array with (num / 8). The interupts are + * defined in linux/mfd/ab8500.h * * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at * offset 0. */ +/* AB8500 support */ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; @@ -256,7 +258,7 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); int i; - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + for (i = 0; i < ab8500->mask_size; i++) { u8 old = ab8500->oldmask[i]; u8 new = ab8500->mask[i]; int reg; @@ -274,7 +276,7 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) ab8500->oldmask[i] = new; - reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; + reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i]; set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new); } @@ -317,8 +319,8 @@ static irqreturn_t ab8500_irq(int irq, void *dev) dev_vdbg(ab8500->dev, "interrupt\n"); - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { - int regoffset = ab8500_irq_regoffset[i]; + for (i = 0; i < ab8500->mask_size; i++) { + int regoffset = ab8500->irq_reg_offset[i]; int status; u8 value; @@ -350,8 +352,11 @@ static int ab8500_irq_init(struct ab8500 *ab8500) { int base = ab8500->irq_base; int irq; + int num_irqs; - for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + num_irqs = AB8500_NR_IRQS; + + for (irq = base; irq < base + num_irqs; irq++) { irq_set_chip_data(irq, ab8500); irq_set_chip_and_handler(irq, &ab8500_irq_chip, handle_simple_irq); @@ -370,8 +375,11 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) { int base = ab8500->irq_base; int irq; + int num_irqs; + + num_irqs = AB8500_NR_IRQS; - for (irq = base; irq < base + AB8500_NR_IRQS; irq++) { + for (irq = base; irq < base + num_irqs; irq++) { #ifdef CONFIG_ARM set_irq_flags(irq, 0); #endif @@ -907,6 +915,16 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) ab8500->chip_id >> 4, ab8500->chip_id & 0x0F); + ab8500->mask_size = AB8500_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab8500_irq_regoffset; + ab8500->mask = kzalloc(ab8500->mask_size, GFP_KERNEL); + if (!ab8500->mask) + return -ENOMEM; + ab8500->oldmask = kzalloc(ab8500->mask_size, GFP_KERNEL); + if (!ab8500->oldmask) { + ret = -ENOMEM; + goto out_freemask; + } /* * ab8500 has switched off due to (SWITCH_OFF_STATUS): * 0x01 Swoff bit programming @@ -929,7 +947,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) plat->init(ab8500); /* Clear and mask all interrupts */ - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + for (i = 0; i < ab8500->mask_size; i++) { /* * Interrupt register 12 doesn't exist prior to AB8500 version * 2.0 @@ -939,23 +957,23 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) continue; get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + ab8500_irq_regoffset[i], + AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i], &value); set_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i], 0xff); + AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i], 0xff); } ret = abx500_register_ops(ab8500->dev, &ab8500_ops); if (ret) - return ret; + goto out_freeoldmask; - for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) + for (i = 0; i < ab8500->mask_size; i++) ab8500->mask[i] = ab8500->oldmask[i] = 0xff; if (ab8500->irq_base) { ret = ab8500_irq_init(ab8500); if (ret) - return ret; + goto out_freeoldmask; ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq, IRQF_ONESHOT | IRQF_NO_SUSPEND, @@ -982,6 +1000,10 @@ out_freeirq: out_removeirq: if (ab8500->irq_base) ab8500_irq_remove(ab8500); +out_freeoldmask: + kfree(ab8500->oldmask); +out_freemask: + kfree(ab8500->mask); return ret; } @@ -994,6 +1016,8 @@ int __devexit ab8500_exit(struct ab8500 *ab8500) free_irq(ab8500->irq, ab8500); ab8500_irq_remove(ab8500); } + kfree(ab8500->oldmask); + kfree(ab8500->mask); return 0; } diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 79892585c08..55eabe8b6ce 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -175,6 +175,9 @@ enum ab8500_version { * @tx_buf: tx buf for SPI * @mask: cache of IRQ regs for bus lock * @oldmask: cache of previous IRQ regs for bus lock + * @mask_size: Actual number of valid entries in mask[], oldmask[] and + * irq_reg_offset + * @irq_reg_offset: Array of offsets into IRQ registers */ struct ab8500 { struct device *dev; @@ -192,8 +195,10 @@ struct ab8500 { unsigned long tx_buf[4]; unsigned long rx_buf[4]; - u8 mask[AB8500_NUM_IRQ_REGS]; - u8 oldmask[AB8500_NUM_IRQ_REGS]; + u8 *mask; + u8 *oldmask; + int mask_size; + const int *irq_reg_offset; }; struct regulator_reg_init; -- cgit v1.2.3-70-g09d2 From d6255529b2639de542324f314b93939b7996a7c5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 20 Feb 2012 21:42:24 +0100 Subject: mfd: Support AB9540 ab8500 variant The AB9540 variant of the AB8500 is basically close enough to use the same driver. This adds the new registers and deviations for this new chip variant. Reviewed-by: Mark Brown Signed-off-by: Maxime Coquelin Signed-off-by: Alex Macro Signed-off-by: Michel Jaouen Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- .../mach-ux500/include/mach/irqs-board-mop500.h | 2 +- drivers/mfd/ab8500-core.c | 191 ++++++++++++++++++--- include/linux/mfd/abx500/ab8500-gpio.h | 4 +- include/linux/mfd/abx500/ab8500-sysctrl.h | 43 +++++ include/linux/mfd/abx500/ab8500.h | 46 ++++- include/linux/regulator/ab8500.h | 70 +++++++- 6 files changed, 331 insertions(+), 25 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index d2d4131435a..7d34c52798b 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -13,7 +13,7 @@ #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ - + AB8500_NR_IRQS) + + AB8500_MAX_NR_IRQS) /* TC35892 */ #define TC35892_NR_INTERNAL_IRQS 8 diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 73907ad1e3d..15a18fee971 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -32,6 +32,7 @@ #define AB8500_IT_SOURCE6_REG 0x05 #define AB8500_IT_SOURCE7_REG 0x06 #define AB8500_IT_SOURCE8_REG 0x07 +#define AB9540_IT_SOURCE13_REG 0x0C #define AB8500_IT_SOURCE19_REG 0x12 #define AB8500_IT_SOURCE20_REG 0x13 #define AB8500_IT_SOURCE21_REG 0x14 @@ -53,6 +54,7 @@ #define AB8500_IT_LATCH9_REG 0x28 #define AB8500_IT_LATCH10_REG 0x29 #define AB8500_IT_LATCH12_REG 0x2B +#define AB9540_IT_LATCH13_REG 0x2C #define AB8500_IT_LATCH19_REG 0x32 #define AB8500_IT_LATCH20_REG 0x33 #define AB8500_IT_LATCH21_REG 0x34 @@ -95,6 +97,9 @@ #define AB8500_TURN_ON_STATUS 0x00 +#define AB9540_MODEM_CTRL2_REG 0x23 +#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT BIT(2) + /* * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt * numbers are indexed into this array with (num / 8). The interupts are @@ -108,6 +113,11 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; +/* AB9540 support */ +static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = { + 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, +}; + static const char ab8500_version_str[][7] = { [AB8500_VERSION_AB8500] = "AB8500", [AB8500_VERSION_AB8505] = "AB8505", @@ -354,7 +364,10 @@ static int ab8500_irq_init(struct ab8500 *ab8500) int irq; int num_irqs; - num_irqs = AB8500_NR_IRQS; + if (is_ab9540(ab8500)) + num_irqs = AB9540_NR_IRQS; + else + num_irqs = AB8500_NR_IRQS; for (irq = base; irq < base + num_irqs; irq++) { irq_set_chip_data(irq, ab8500); @@ -377,7 +390,10 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) int irq; int num_irqs; - num_irqs = AB8500_NR_IRQS; + if (is_ab9540(ab8500)) + num_irqs = AB9540_NR_IRQS; + else + num_irqs = AB8500_NR_IRQS; for (irq = base; irq < base + num_irqs; irq++) { #ifdef CONFIG_ARM @@ -388,6 +404,7 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) } } +/* AB8500 GPIO Resources */ static struct resource __devinitdata ab8500_gpio_resources[] = { { .name = "GPIO_INT6", @@ -397,6 +414,28 @@ static struct resource __devinitdata ab8500_gpio_resources[] = { } }; +/* AB9540 GPIO Resources */ +static struct resource __devinitdata ab9540_gpio_resources[] = { + { + .name = "GPIO_INT6", + .start = AB8500_INT_GPIO6R, + .end = AB8500_INT_GPIO41F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "GPIO_INT14", + .start = AB9540_INT_GPIO50R, + .end = AB9540_INT_GPIO54R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "GPIO_INT15", + .start = AB9540_INT_GPIO50F, + .end = AB9540_INT_GPIO54F, + .flags = IORESOURCE_IRQ, + } +}; + static struct resource __devinitdata ab8500_gpadc_resources[] = { { .name = "HW_CONV_END", @@ -713,7 +752,7 @@ static struct resource __devinitdata ab8500_temp_resources[] = { }, }; -static struct mfd_cell __devinitdata ab8500_devs[] = { +static struct mfd_cell __devinitdata abx500_common_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -727,11 +766,6 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { { .name = "ab8500-regulator", }, - { - .name = "ab8500-gpio", - .num_resources = ARRAY_SIZE(ab8500_gpio_resources), - .resources = ab8500_gpio_resources, - }, { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), @@ -770,11 +804,7 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { { .name = "ab8500-codec", }, - { - .name = "ab8500-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, - }, + { .name = "ab8500-poweron-key", .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), @@ -803,6 +833,32 @@ static struct mfd_cell __devinitdata ab8500_devs[] = { }, }; +static struct mfd_cell __devinitdata ab8500_devs[] = { + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab8500_gpio_resources), + .resources = ab8500_gpio_resources, + }, + { + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, +}; + +static struct mfd_cell __devinitdata ab9540_devs[] = { + { + .name = "ab8500-gpio", + .num_resources = ARRAY_SIZE(ab9540_gpio_resources), + .resources = ab9540_gpio_resources, + }, + { + .name = "ab9540-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, +}; + static ssize_t show_chip_id(struct device *dev, struct device_attribute *attr, char *buf) { @@ -864,9 +920,64 @@ static ssize_t show_turn_on_status(struct device *dev, return sprintf(buf, "%#x\n", value); } +static ssize_t show_ab9540_dbbrstn(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ab8500 *ab8500; + int ret; + u8 value; + + ab8500 = dev_get_drvdata(dev); + + ret = get_register_interruptible(ab8500, AB8500_REGU_CTRL2, + AB9540_MODEM_CTRL2_REG, &value); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", + (value & AB9540_MODEM_CTRL2_SWDBBRSTN_BIT) ? 1 : 0); +} + +static ssize_t store_ab9540_dbbrstn(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ab8500 *ab8500; + int ret = count; + int err; + u8 bitvalues; + + ab8500 = dev_get_drvdata(dev); + + if (count > 0) { + switch (buf[0]) { + case '0': + bitvalues = 0; + break; + case '1': + bitvalues = AB9540_MODEM_CTRL2_SWDBBRSTN_BIT; + break; + default: + goto exit; + } + + err = mask_and_set_register_interruptible(ab8500, + AB8500_REGU_CTRL2, AB9540_MODEM_CTRL2_REG, + AB9540_MODEM_CTRL2_SWDBBRSTN_BIT, bitvalues); + if (err) + dev_info(ab8500->dev, + "Failed to set DBBRSTN %c, err %#x\n", + buf[0], err); + } + +exit: + return ret; +} + static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL); static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL); static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL); +static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR, + show_ab9540_dbbrstn, store_ab9540_dbbrstn); static struct attribute *ab8500_sysfs_entries[] = { &dev_attr_chip_id.attr, @@ -875,10 +986,22 @@ static struct attribute *ab8500_sysfs_entries[] = { NULL, }; +static struct attribute *ab9540_sysfs_entries[] = { + &dev_attr_chip_id.attr, + &dev_attr_switch_off_status.attr, + &dev_attr_turn_on_status.attr, + &dev_attr_dbbrstn.attr, + NULL, +}; + static struct attribute_group ab8500_attr_group = { .attrs = ab8500_sysfs_entries, }; +static struct attribute_group ab9540_attr_group = { + .attrs = ab9540_sysfs_entries, +}; + int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) { struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); @@ -915,8 +1038,14 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) ab8500->chip_id >> 4, ab8500->chip_id & 0x0F); - ab8500->mask_size = AB8500_NUM_IRQ_REGS; - ab8500->irq_reg_offset = ab8500_irq_regoffset; + /* Configure AB8500 or AB9540 IRQ */ + if (is_ab9540(ab8500)) { + ab8500->mask_size = AB9540_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab9540_irq_regoffset; + } else { + ab8500->mask_size = AB8500_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab8500_irq_regoffset; + } ab8500->mask = kzalloc(ab8500->mask_size, GFP_KERNEL); if (!ab8500->mask) return -ENOMEM; @@ -982,17 +1111,34 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) goto out_removeirq; } - ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, - ARRAY_SIZE(ab8500_devs), NULL, + ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, + ARRAY_SIZE(abx500_common_devs), NULL, + ab8500->irq_base); + + if (ret) + goto out_freeirq; + + if (is_ab9540(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, + ARRAY_SIZE(ab9540_devs), NULL, + ab8500->irq_base); + else + ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, + ARRAY_SIZE(ab9540_devs), NULL, ab8500->irq_base); if (ret) goto out_freeirq; - ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (is_ab9540(ab8500)) + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab9540_attr_group); + else + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab8500_attr_group); if (ret) dev_err(ab8500->dev, "error creating sysfs entries\n"); - - return ret; + else + return ret; out_freeirq: if (ab8500->irq_base) @@ -1010,7 +1156,10 @@ out_freemask: int __devexit ab8500_exit(struct ab8500 *ab8500) { - sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (is_ab9540(ab8500)) + sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group); + else + sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); mfd_remove_devices(ab8500->dev); if (ab8500->irq_base) { free_irq(ab8500->irq, ab8500); diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h index 488a8c920a2..2387c207ea8 100644 --- a/include/linux/mfd/abx500/ab8500-gpio.h +++ b/include/linux/mfd/abx500/ab8500-gpio.h @@ -10,12 +10,14 @@ /* * Platform data to register a block: only the initial gpio/irq number. + * Array sizes are large enough to contain all AB8500 and AB9540 GPIO + * registers. */ struct ab8500_gpio_platform_data { int gpio_base; u32 irq_base; - u8 config_reg[7]; + u8 config_reg[8]; }; #endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index 10da0291f8f..10eb50973c3 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -71,6 +71,13 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) #define AB8500_SWATCTRL 0x230 #define AB8500_HIQCLKCTRL 0x232 #define AB8500_VSIMSYSCLKCTRL 0x233 +#define AB9540_SYSCLK12BUFCTRL 0x234 +#define AB9540_SYSCLK12CONFCTRL 0x235 +#define AB9540_SYSCLK12BUFCTRL2 0x236 +#define AB9540_SYSCLK12BUF1VALID 0x237 +#define AB9540_SYSCLK12BUF2VALID 0x238 +#define AB9540_SYSCLK12BUF3VALID 0x239 +#define AB9540_SYSCLK12BUF4VALID 0x23A /* Bits */ #define AB8500_TURNONSTATUS_PORNVBAT BIT(0) @@ -251,4 +258,40 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) #define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0 + +#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1) +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2 +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6) + +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3) + +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0 + #endif /* __AB8500_SYSCTRL_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 55eabe8b6ce..4b2df29fb85 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -57,8 +57,11 @@ enum ab8500_version { /* * Interrupts + * Values used to index into array ab8500_irq_regoffset[] defined in + * drivers/mdf/ab8500-core.c */ - +/* Definitions for AB8500 and AB9540 */ +/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */ #define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 #define AB8500_INT_UN_PLUG_TV_DET 1 #define AB8500_INT_PLUG_TV_DET 2 @@ -67,6 +70,7 @@ enum ab8500_version { #define AB8500_INT_PON_KEY2DB_R 5 #define AB8500_INT_PON_KEY1DB_F 6 #define AB8500_INT_PON_KEY1DB_R 7 +/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */ #define AB8500_INT_BATT_OVV 8 #define AB8500_INT_MAIN_CH_UNPLUG_DET 10 #define AB8500_INT_MAIN_CH_PLUG_DET 11 @@ -74,6 +78,7 @@ enum ab8500_version { #define AB8500_INT_USB_ID_DET_R 13 #define AB8500_INT_VBUS_DET_F 14 #define AB8500_INT_VBUS_DET_R 15 +/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */ #define AB8500_INT_VBUS_CH_DROP_END 16 #define AB8500_INT_RTC_60S 17 #define AB8500_INT_RTC_ALARM 18 @@ -81,6 +86,7 @@ enum ab8500_version { #define AB8500_INT_CH_WD_EXP 21 #define AB8500_INT_VBUS_OVV 22 #define AB8500_INT_MAIN_CH_DROP_END 23 +/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */ #define AB8500_INT_CCN_CONV_ACC 24 #define AB8500_INT_INT_AUD 25 #define AB8500_INT_CCEOC 26 @@ -89,6 +95,7 @@ enum ab8500_version { #define AB8500_INT_LOW_BAT_R 29 #define AB8500_INT_BUP_CHG_NOT_OK 30 #define AB8500_INT_BUP_CHG_OK 31 +/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */ #define AB8500_INT_GP_HW_ADC_CONV_END 32 #define AB8500_INT_ACC_DETECT_1DB_F 33 #define AB8500_INT_ACC_DETECT_1DB_R 34 @@ -97,6 +104,7 @@ enum ab8500_version { #define AB8500_INT_ACC_DETECT_21DB_F 37 #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 +/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */ #define AB8500_INT_GPIO6R 40 #define AB8500_INT_GPIO7R 41 #define AB8500_INT_GPIO8R 42 @@ -105,6 +113,7 @@ enum ab8500_version { #define AB8500_INT_GPIO11R 45 #define AB8500_INT_GPIO12R 46 #define AB8500_INT_GPIO13R 47 +/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */ #define AB8500_INT_GPIO24R 48 #define AB8500_INT_GPIO25R 49 #define AB8500_INT_GPIO36R 50 @@ -113,6 +122,7 @@ enum ab8500_version { #define AB8500_INT_GPIO39R 53 #define AB8500_INT_GPIO40R 54 #define AB8500_INT_GPIO41R 55 +/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */ #define AB8500_INT_GPIO6F 56 #define AB8500_INT_GPIO7F 57 #define AB8500_INT_GPIO8F 58 @@ -121,6 +131,7 @@ enum ab8500_version { #define AB8500_INT_GPIO11F 61 #define AB8500_INT_GPIO12F 62 #define AB8500_INT_GPIO13F 63 +/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */ #define AB8500_INT_GPIO24F 64 #define AB8500_INT_GPIO25F 65 #define AB8500_INT_GPIO36F 66 @@ -129,6 +140,7 @@ enum ab8500_version { #define AB8500_INT_GPIO39F 69 #define AB8500_INT_GPIO40F 70 #define AB8500_INT_GPIO41F 71 +/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */ #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 #define AB8500_INT_ADP_PROBE_PLUG 74 @@ -136,30 +148,62 @@ enum ab8500_version { #define AB8500_INT_ADP_SENSE_OFF 76 #define AB8500_INT_USB_PHY_POWER_ERR 78 #define AB8500_INT_USB_LINK_STATUS 79 +/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */ #define AB8500_INT_BTEMP_LOW 80 #define AB8500_INT_BTEMP_LOW_MEDIUM 81 #define AB8500_INT_BTEMP_MEDIUM_HIGH 82 #define AB8500_INT_BTEMP_HIGH 83 +/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */ #define AB8500_INT_USB_CHARGER_NOT_OK 89 #define AB8500_INT_ID_WAKEUP_R 90 #define AB8500_INT_ID_DET_R1R 92 #define AB8500_INT_ID_DET_R2R 93 #define AB8500_INT_ID_DET_R3R 94 #define AB8500_INT_ID_DET_R4R 95 +/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */ #define AB8500_INT_ID_WAKEUP_F 96 #define AB8500_INT_ID_DET_R1F 98 #define AB8500_INT_ID_DET_R2F 99 #define AB8500_INT_ID_DET_R3F 100 #define AB8500_INT_ID_DET_R4F 101 #define AB8500_INT_USB_CHG_DET_DONE 102 +/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */ #define AB8500_INT_USB_CH_TH_PROT_F 104 #define AB8500_INT_USB_CH_TH_PROT_R 105 #define AB8500_INT_MAIN_CH_TH_PROT_F 106 #define AB8500_INT_MAIN_CH_TH_PROT_R 107 #define AB8500_INT_USB_CHARGER_NOT_OKF 111 +/* Definitions for AB9540 */ +/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */ +#define AB9540_INT_GPIO50R 113 +#define AB9540_INT_GPIO51R 114 +#define AB9540_INT_GPIO52R 115 +#define AB9540_INT_GPIO53R 116 +#define AB9540_INT_GPIO54R 117 +#define AB9540_INT_IEXT_CH_RF_BFN_R 118 +#define AB9540_INT_IEXT_CH_RF_BFN_F 119 +/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */ +#define AB9540_INT_GPIO50F 121 +#define AB9540_INT_GPIO51F 122 +#define AB9540_INT_GPIO52F 123 +#define AB9540_INT_GPIO53F 124 +#define AB9540_INT_GPIO54F 125 + +/* + * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the + * entire platform. This is a "compile time" constant so this must be set to + * the largest possible value that may be encountered with different AB SOCs. + * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540 + * which is larger. + */ #define AB8500_NR_IRQS 112 +#define AB9540_NR_IRQS 128 +/* This is set to the roof of any AB8500 chip variant IRQ counts */ +#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS + #define AB8500_NUM_IRQ_REGS 14 +#define AB9540_NUM_IRQ_REGS 17 /** * struct ab8500 - ab8500 internal structure diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 76579f964a2..7bd73bbdfd1 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -26,7 +26,26 @@ enum ab8500_regulator_id { AB8500_NUM_REGULATORS, }; -/* AB8500 register initialization */ +/* AB9450 regulators */ +enum ab9540_regulator_id { + AB9540_LDO_AUX1, + AB9540_LDO_AUX2, + AB9540_LDO_AUX3, + AB9540_LDO_AUX4, + AB9540_LDO_INTCORE, + AB9540_LDO_TVOUT, + AB9540_LDO_USB, + AB9540_LDO_AUDIO, + AB9540_LDO_ANAMIC1, + AB9540_LDO_ANAMIC2, + AB9540_LDO_DMIC, + AB9540_LDO_ANA, + AB9540_SYSCLKREQ_2, + AB9540_SYSCLKREQ_4, + AB9540_NUM_REGULATORS, +}; + +/* AB8500 and AB9540 register initialization */ struct ab8500_regulator_reg_init { int id; u8 value; @@ -71,4 +90,53 @@ enum ab8500_regulator_reg { AB8500_NUM_REGULATOR_REGISTERS, }; + +/* AB9540 registers */ +enum ab9540_regulator_reg { + AB9540_REGUREQUESTCTRL1, + AB9540_REGUREQUESTCTRL2, + AB9540_REGUREQUESTCTRL3, + AB9540_REGUREQUESTCTRL4, + AB9540_REGUSYSCLKREQ1HPVALID1, + AB9540_REGUSYSCLKREQ1HPVALID2, + AB9540_REGUHWHPREQ1VALID1, + AB9540_REGUHWHPREQ1VALID2, + AB9540_REGUHWHPREQ2VALID1, + AB9540_REGUHWHPREQ2VALID2, + AB9540_REGUSWHPREQVALID1, + AB9540_REGUSWHPREQVALID2, + AB9540_REGUSYSCLKREQVALID1, + AB9540_REGUSYSCLKREQVALID2, + AB9540_REGUVAUX4REQVALID, + AB9540_REGUMISC1, + AB9540_VAUDIOSUPPLY, + AB9540_REGUCTRL1VAMIC, + AB9540_VSMPS1REGU, + AB9540_VSMPS2REGU, + AB9540_VSMPS3REGU, /* NOTE! PRCMU register */ + AB9540_VPLLVANAREGU, + AB9540_EXTSUPPLYREGU, + AB9540_VAUX12REGU, + AB9540_VRF1VAUX3REGU, + AB9540_VSMPS1SEL1, + AB9540_VSMPS1SEL2, + AB9540_VSMPS1SEL3, + AB9540_VSMPS2SEL1, + AB9540_VSMPS2SEL2, + AB9540_VSMPS2SEL3, + AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */ + AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */ + AB9540_VAUX1SEL, + AB9540_VAUX2SEL, + AB9540_VRF1VAUX3SEL, + AB9540_REGUCTRL2SPARE, + AB9540_VAUX4REQCTRL, + AB9540_VAUX4REGU, + AB9540_VAUX4SEL, + AB9540_REGUCTRLDISCH, + AB9540_REGUCTRLDISCH2, + AB9540_REGUCTRLDISCH3, + AB9540_NUM_REGULATOR_REGISTERS, +}; + #endif -- cgit v1.2.3-70-g09d2 From 485540dce01cf4b4d3629141399678e35e66b711 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 20 Feb 2012 12:30:26 +0100 Subject: mfd: Decouple/recouple gic from the ux500 PRCMU This patch allows to decouple and recouple the gic from the PRCMU. This is needed to put the A9 core in retention mode with the cpuidle driver. It is based on top of the "DB8500 PRCMU update" patchset. Signed-off-by: Daniel Lezcano Acked-by: Rickard Andersson Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 32 ++++++++++++++++++++++++++++++++ include/linux/mfd/db8500-prcmu.h | 2 ++ include/linux/mfd/dbx500-prcmu.h | 16 ++++++++++++++++ 3 files changed, 50 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 128b5f4a4fb..b320cc60266 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -821,6 +821,38 @@ u8 db8500_prcmu_get_power_state_result(void) return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS); } +#define PRCMU_A9_MASK_REQ 0x00000328 +#define PRCMU_A9_MASK_REQ_MASK 0x00000001 +#define PRCMU_GIC_DELAY 1 + +/* This function decouple the gic from the prcmu */ +int db8500_prcmu_gic_decouple(void) +{ + u32 val = readl(_PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Set bit 0 register value to 1 */ + writel(val | PRCMU_A9_MASK_REQ_MASK, _PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Make sure the register is updated */ + readl(_PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Wait a few cycles for the gic mask completion */ + udelay(PRCMU_GIC_DELAY); + + return 0; +} + +/* This function recouple the gic with the prcmu */ +int db8500_prcmu_gic_recouple(void) +{ + u32 val = readl(_PRCMU_BASE + PRCMU_A9_MASK_REQ); + + /* Set bit 0 register value to 0 */ + writel(val & ~PRCMU_A9_MASK_REQ_MASK, _PRCMU_BASE + PRCMU_A9_MASK_REQ); + + return 0; +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 636423bd511..cf48aa76acc 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -580,6 +580,8 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 val); void db8500_prcmu_system_reset(u16 reset_code); int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); u8 db8500_prcmu_get_power_state_result(void); +int db8500_prcmu_gic_decouple(void); +int db8500_prcmu_gic_recouple(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index b3b5adfa9e4..5bf5c4f0132 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -281,6 +281,22 @@ static inline u8 prcmu_get_power_state_result(void) return db8500_prcmu_get_power_state_result(); } +static inline int prcmu_gic_decouple(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_decouple(); +} + +static inline int prcmu_gic_recouple(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_recouple(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { if (cpu_is_u5500()) -- cgit v1.2.3-70-g09d2 From 91d6a9a6c0d98ef6daeaf229e5acada652b4f6f0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 22 Feb 2012 11:43:40 +0800 Subject: mfd: Remove unused io_lock mutex from da9052 da9052 has been converted to use regmap API, so we can remove the unused io_lock mutex. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/da9052-core.c | 3 --- include/linux/mfd/da9052/da9052.h | 2 -- 2 files changed, 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 5ddde2a9176..7ff313fe9fb 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -647,8 +646,6 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id) struct irq_desc *desc; int ret; - mutex_init(&da9052->io_lock); - if (pdata && pdata->init != NULL) pdata->init(da9052); diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 5702d1be13b..7ffbd6e9e7f 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -76,8 +76,6 @@ enum da9052_chip_id { struct da9052_pdata; struct da9052 { - struct mutex io_lock; - struct device *dev; struct regmap *regmap; -- cgit v1.2.3-70-g09d2 From 2853378b6eafd8b9e2f0e39ab599c93ce518b04d Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Mon, 27 Feb 2012 15:44:20 +0100 Subject: mfd: Add ability to wake the system for 88pm860x For 88pm860x pmic, it can wake the system from low power mode by irq, its sub-devs like RTC and onkey can be enabled for this usage. Signed-off-by: Jett.Zhou Signed-off-by: Samuel Ortiz --- drivers/input/misc/88pm860x_onkey.c | 26 ++++++++++++++++++++++++++ drivers/mfd/88pm860x-i2c.c | 25 +++++++++++++++++++++++++ drivers/rtc/rtc-88pm860x.c | 27 +++++++++++++++++++++++++++ include/linux/mfd/88pm860x.h | 1 + 4 files changed, 79 insertions(+) (limited to 'include/linux') diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c index f2e0cbc5ab6..f9ce1835e4d 100644 --- a/drivers/input/misc/88pm860x_onkey.c +++ b/drivers/input/misc/88pm860x_onkey.c @@ -105,6 +105,8 @@ static int __devinit pm860x_onkey_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, info); + device_init_wakeup(&pdev->dev, 1); + return 0; out_irq: @@ -129,10 +131,34 @@ static int __devexit pm860x_onkey_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_onkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_ONKEY; + return 0; +} +static int pm860x_onkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_ONKEY); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_onkey_pm_ops, pm860x_onkey_suspend, pm860x_onkey_resume); + static struct platform_driver pm860x_onkey_driver = { .driver = { .name = "88pm860x-onkey", .owner = THIS_MODULE, + .pm = &pm860x_onkey_pm_ops, }, .probe = pm860x_onkey_probe, .remove = __devexit_p(pm860x_onkey_remove), diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c index f93dd9571c3..b2cfdc45856 100644 --- a/drivers/mfd/88pm860x-i2c.c +++ b/drivers/mfd/88pm860x-i2c.c @@ -334,10 +334,35 @@ static int __devexit pm860x_remove(struct i2c_client *client) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_suspend(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct pm860x_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev) && chip->wakeup_flag) + enable_irq_wake(chip->core_irq); + return 0; +} + +static int pm860x_resume(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct pm860x_chip *chip = i2c_get_clientdata(client); + + if (device_may_wakeup(dev) && chip->wakeup_flag) + disable_irq_wake(chip->core_irq); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_pm_ops, pm860x_suspend, pm860x_resume); + static struct i2c_driver pm860x_driver = { .driver = { .name = "88PM860x", .owner = THIS_MODULE, + .pm = &pm860x_pm_ops, }, .probe = pm860x_probe, .remove = __devexit_p(pm860x_remove), diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c index f04761e6622..afee0e8ae71 100644 --- a/drivers/rtc/rtc-88pm860x.c +++ b/drivers/rtc/rtc-88pm860x.c @@ -376,6 +376,9 @@ static int __devinit pm860x_rtc_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work); schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL); #endif /* VRTC_CALIBRATION */ + + device_init_wakeup(&pdev->dev, 1); + return 0; out_rtc: free_irq(info->irq, info); @@ -401,10 +404,34 @@ static int __devexit pm860x_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int pm860x_rtc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_RTC; + return 0; +} +static int pm860x_rtc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume); + static struct platform_driver pm860x_rtc_driver = { .driver = { .name = "88pm860x-rtc", .owner = THIS_MODULE, + .pm = &pm860x_rtc_pm_ops, }, .probe = pm860x_rtc_probe, .remove = __devexit_p(pm860x_rtc_remove), diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 92be3476c9f..8b583f3f792 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -311,6 +311,7 @@ struct pm860x_chip { int core_irq; unsigned char chip_version; + unsigned int wakeup_flag; }; enum { -- cgit v1.2.3-70-g09d2 From dc9913a050f1898c6a77f4f5606bc194d530aafd Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 21 Feb 2012 18:21:34 +0530 Subject: mfd: Use regmap for tps65910 register access. Using regmap apis for accessing the device registers and using RBTREE caching mechanims for caching registers. Enabling caching of the registers which is used for voltage controls. By doing this, the modify_bits operation is faster as it does not involve the i2c register read from device, just read from cache. This results faster set voltage operation. Signed-off-by: Laxman Dewangan Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 1 + drivers/mfd/tps65910.c | 123 ++++++++++++++++--------------------------- include/linux/mfd/tps65910.h | 1 + 3 files changed, 48 insertions(+), 77 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d92bea2c468..16178e1d2ab 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -177,6 +177,7 @@ config MFD_TPS65910 depends on I2C=y && GPIOLIB select MFD_CORE select GPIO_TPS65910 + select REGMAP_I2C help if you say yes here you get support for the TPS65910 series of Power Management chips. diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 4392f6bca15..1c4f53efee7 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -16,10 +16,12 @@ #include #include #include +#include #include #include #include #include +#include #include static struct mfd_cell tps65910s[] = { @@ -38,99 +40,56 @@ static struct mfd_cell tps65910s[] = { static int tps65910_i2c_read(struct tps65910 *tps65910, u8 reg, int bytes, void *dest) { - struct i2c_client *i2c = tps65910->i2c_client; - struct i2c_msg xfer[2]; - int ret; - - /* Write register */ - xfer[0].addr = i2c->addr; - xfer[0].flags = 0; - xfer[0].len = 1; - xfer[0].buf = ® - - /* Read data */ - xfer[1].addr = i2c->addr; - xfer[1].flags = I2C_M_RD; - xfer[1].len = bytes; - xfer[1].buf = dest; - - ret = i2c_transfer(i2c->adapter, xfer, 2); - if (ret == 2) - ret = 0; - else if (ret >= 0) - ret = -EIO; - - return ret; + return regmap_bulk_read(tps65910->regmap, reg, dest, bytes); } static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, - int bytes, void *src) + int bytes, void *src) { - struct i2c_client *i2c = tps65910->i2c_client; - /* we add 1 byte for device register */ - u8 msg[TPS65910_MAX_REGISTER + 1]; - int ret; - - if (bytes > TPS65910_MAX_REGISTER) - return -EINVAL; - - msg[0] = reg; - memcpy(&msg[1], src, bytes); - - ret = i2c_master_send(i2c, msg, bytes + 1); - if (ret < 0) - return ret; - if (ret != bytes + 1) - return -EIO; - return 0; + return regmap_bulk_write(tps65910->regmap, reg, src, bytes); } int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask) { - u8 data; - int err; - - mutex_lock(&tps65910->io_mutex); - err = tps65910_i2c_read(tps65910, reg, 1, &data); - if (err) { - dev_err(tps65910->dev, "read from reg %x failed\n", reg); - goto out; - } - - data |= mask; - err = tps65910_i2c_write(tps65910, reg, 1, &data); - if (err) - dev_err(tps65910->dev, "write to reg %x failed\n", reg); - -out: - mutex_unlock(&tps65910->io_mutex); - return err; + return regmap_update_bits(tps65910->regmap, reg, mask, mask); } EXPORT_SYMBOL_GPL(tps65910_set_bits); int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask) { - u8 data; - int err; - - mutex_lock(&tps65910->io_mutex); - err = tps65910_i2c_read(tps65910, reg, 1, &data); - if (err) { - dev_err(tps65910->dev, "read from reg %x failed\n", reg); - goto out; - } - - data &= ~mask; - err = tps65910_i2c_write(tps65910, reg, 1, &data); - if (err) - dev_err(tps65910->dev, "write to reg %x failed\n", reg); - -out: - mutex_unlock(&tps65910->io_mutex); - return err; + return regmap_update_bits(tps65910->regmap, reg, mask, 0); } EXPORT_SYMBOL_GPL(tps65910_clear_bits); +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + struct tps65910 *tps65910 = dev_get_drvdata(dev); + + /* + * Caching all regulator registers. + * All regualator register address range is same for + * TPS65910 and TPS65911 + */ + if ((reg >= TPS65910_VIO) && (reg <= TPS65910_VDAC)) { + /* Check for non-existing register */ + if (tps65910_chip_id(tps65910) == TPS65910) + if ((reg == TPS65911_VDDCTRL_OP) || + (reg == TPS65911_VDDCTRL_SR)) + return true; + return false; + } + return true; +} + +static const struct regmap_config rc5t583_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = is_volatile_reg, + .max_register = TPS65910_MAX_REGISTER, + .num_reg_defaults_raw = TPS65910_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + static int tps65910_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -161,6 +120,13 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, tps65910->write = tps65910_i2c_write; mutex_init(&tps65910->io_mutex); + tps65910->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config); + if (IS_ERR(tps65910->regmap)) { + ret = PTR_ERR(tps65910->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + goto regmap_err; + } + ret = mfd_add_devices(tps65910->dev, -1, tps65910s, ARRAY_SIZE(tps65910s), NULL, 0); @@ -178,6 +144,8 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, return ret; err: + regmap_exit(tps65910->regmap); +regmap_err: kfree(tps65910); kfree(init_data); return ret; @@ -189,6 +157,7 @@ static int tps65910_i2c_remove(struct i2c_client *i2c) tps65910_irq_exit(tps65910); mfd_remove_devices(tps65910->dev); + regmap_exit(tps65910->regmap); kfree(tps65910); return 0; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index d0cb12eba40..b9aceb5c122 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -789,6 +789,7 @@ struct tps65910_board { struct tps65910 { struct device *dev; struct i2c_client *i2c_client; + struct regmap *regmap; struct mutex io_mutex; unsigned int id; int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest); -- cgit v1.2.3-70-g09d2 From 23de435a59b37eda468472ac67179eee5ef10a07 Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Thu, 1 Mar 2012 11:59:19 +0100 Subject: mfd: Add power control interface for pm8606 chip The reference group and internal oscillator are shared by sub-devs like led, backlight and vibrator in PM8606 chip. Now introduce a voting mechanism to enable/disable it. Add pm8606_osc_enable() and pm8606_osc_disable() interface and related defines to support this. This interface will be called by vibrator led and backlight driver.The refernce group and internal oscillator are enabled only when at least one of it's clients holds it on or disabled only all the clients don't use it any more based on the above mechanism. Signed-off-by: Jett.Zhou Signed-off-by: Samuel Ortiz --- drivers/mfd/88pm860x-core.c | 95 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/88pm860x.h | 22 ++++++++++ 2 files changed, 117 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 17dfe9bb6d2..78c3a9e1fa1 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -503,6 +503,99 @@ static void device_irq_exit(struct pm860x_chip *chip) free_irq(chip->core_irq, chip); } +int pm8606_osc_enable(struct pm860x_chip *chip, unsigned short client) +{ + int ret = -EIO; + struct i2c_client *i2c = (chip->id == CHIP_PM8606) ? + chip->client : chip->companion; + + dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client); + dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n", + __func__, chip->osc_vote, + chip->osc_status); + + mutex_lock(&chip->osc_lock); + /* Update voting status */ + chip->osc_vote |= client; + /* If reference group is off - turn on*/ + if (chip->osc_status != PM8606_REF_GP_OSC_ON) { + chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; + /* Enable Reference group Vsys */ + if (pm860x_set_bits(i2c, PM8606_VSYS, + PM8606_VSYS_EN, PM8606_VSYS_EN)) + goto out; + + /*Enable Internal Oscillator */ + if (pm860x_set_bits(i2c, PM8606_MISC, + PM8606_MISC_OSC_EN, PM8606_MISC_OSC_EN)) + goto out; + /* Update status (only if writes succeed) */ + chip->osc_status = PM8606_REF_GP_OSC_ON; + } + mutex_unlock(&chip->osc_lock); + + dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n", + __func__, chip->osc_vote, + chip->osc_status, ret); + return 0; +out: + mutex_unlock(&chip->osc_lock); + return ret; +} + +int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client) +{ + int ret = -EIO; + struct i2c_client *i2c = (chip->id == CHIP_PM8606) ? + chip->client : chip->companion; + + dev_dbg(chip->dev, "%s(B): client=0x%x\n", __func__, client); + dev_dbg(chip->dev, "%s(B): vote=0x%x status=%d\n", + __func__, chip->osc_vote, + chip->osc_status); + + mutex_lock(&chip->osc_lock); + /*Update voting status */ + chip->osc_vote &= ~(client); + /* If reference group is off and this is the last client to release + * - turn off */ + if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) && + (chip->osc_vote == REF_GP_NO_CLIENTS)) { + chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN; + /* Disable Reference group Vsys */ + if (pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0)) + goto out; + /* Disable Internal Oscillator */ + if (pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0)) + goto out; + chip->osc_status = PM8606_REF_GP_OSC_OFF; + } + mutex_unlock(&chip->osc_lock); + + dev_dbg(chip->dev, "%s(A): vote=0x%x status=%d ret=%d\n", + __func__, chip->osc_vote, + chip->osc_status, ret); + return 0; +out: + mutex_unlock(&chip->osc_lock); + return ret; +} + +static void __devinit device_osc_init(struct i2c_client *i2c) +{ + struct pm860x_chip *chip = i2c_get_clientdata(i2c); + + mutex_init(&chip->osc_lock); + /* init portofino reference group voting and status */ + /* Disable Reference group Vsys */ + pm860x_set_bits(i2c, PM8606_VSYS, PM8606_VSYS_EN, 0); + /* Disable Internal Oscillator */ + pm860x_set_bits(i2c, PM8606_MISC, PM8606_MISC_OSC_EN, 0); + + chip->osc_vote = REF_GP_NO_CLIENTS; + chip->osc_status = PM8606_REF_GP_OSC_OFF; +} + static void __devinit device_bk_init(struct pm860x_chip *chip, struct pm860x_platform_data *pdata) { @@ -774,6 +867,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip, switch (chip->id) { case CHIP_PM8606: + device_osc_init(chip->client); device_bk_init(chip, pdata); device_led_init(chip, pdata); break; @@ -785,6 +879,7 @@ int __devinit pm860x_device_init(struct pm860x_chip *chip, if (chip->companion) { switch (chip->id) { case CHIP_PM8607: + device_osc_init(chip->companion); device_bk_init(chip, pdata); device_led_init(chip, pdata); break; diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 8b583f3f792..84d071ade1d 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -263,6 +263,22 @@ enum { #define PM8607_PD_PREBIAS_MASK (0x1F << 0) #define PM8607_PD_PRECHG_MASK (7 << 5) +#define PM8606_REF_GP_OSC_OFF 0 +#define PM8606_REF_GP_OSC_ON 1 +#define PM8606_REF_GP_OSC_UNKNOWN 2 + +/* Clients of reference group and 8MHz oscillator in 88PM8606 */ +enum pm8606_ref_gp_and_osc_clients { + REF_GP_NO_CLIENTS = 0, + WLED1_DUTY = (1<<0), /*PF 0x02.7:0*/ + WLED2_DUTY = (1<<1), /*PF 0x04.7:0*/ + WLED3_DUTY = (1<<2), /*PF 0x06.7:0*/ + RGB1_ENABLE = (1<<3), /*PF 0x07.1*/ + RGB2_ENABLE = (1<<4), /*PF 0x07.2*/ + LDO_VBR_EN = (1<<5), /*PF 0x12.0*/ + REF_GP_MAX_CLIENT = 0xFFFF +}; + /* Interrupt Number in 88PM8607 */ enum { PM8607_IRQ_ONKEY, @@ -298,6 +314,7 @@ enum { struct pm860x_chip { struct device *dev; struct mutex irq_lock; + struct mutex osc_lock; struct i2c_client *client; struct i2c_client *companion; /* companion chip client */ struct regmap *regmap; @@ -305,11 +322,13 @@ struct pm860x_chip { int buck3_double; /* DVC ramp slope double */ unsigned short companion_addr; + unsigned short osc_vote; int id; int irq_mode; int irq_base; int core_irq; unsigned char chip_version; + unsigned char osc_status; unsigned int wakeup_flag; }; @@ -370,6 +389,9 @@ struct pm860x_platform_data { int num_regulators; }; +extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short); +extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short); + extern int pm860x_reg_read(struct i2c_client *, int); extern int pm860x_reg_write(struct i2c_client *, int, unsigned char); extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *); -- cgit v1.2.3-70-g09d2 From cc9a0f68d1f8b9bfd9c0c2ada13db64d63f63db3 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 28 Feb 2012 22:46:06 +0100 Subject: mfd : Check if there are pending irq on the db8500 gic This patch introduces a routine to check if there are some irqs pending on the gic. Usually this check is not relevant because it appears racy (an irq can arrive right after this check), but in the ux500 it makes sense because the prcmu decouples the gic from the A9 cores. Signed-off-by: Daniel Lezcano Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 33 +++++++++++++++++++++++++++++++++ include/linux/mfd/db8500-prcmu.h | 1 + include/linux/mfd/dbx500-prcmu.h | 8 ++++++++ 3 files changed, 42 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index d2244dc5d3b..8346a0e3994 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -850,6 +851,38 @@ int db8500_prcmu_gic_recouple(void) return 0; } +#define PRCMU_GIC_NUMBER_REGS 5 + +/* + * This function checks if there are pending irq on the gic. It only + * makes sense if the gic has been decoupled before with the + * db8500_prcmu_gic_decouple function. Disabling an interrupt only + * disables the forwarding of the interrupt to any CPU interface. It + * does not prevent the interrupt from changing state, for example + * becoming pending, or active and pending if it is already + * active. Hence, we have to check the interrupt is pending *and* is + * active. + */ +bool db8500_prcmu_gic_pending_irq(void) +{ + u32 pr; /* Pending register */ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* 5 registers. STI & PPI not skipped */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) { + + pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4); + er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + if (pr & er) + return true; /* There is a pending interrupt */ + } + + return false; +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index cf48aa76acc..92dac13b9ee 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -582,6 +582,7 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); u8 db8500_prcmu_get_power_state_result(void); int db8500_prcmu_gic_decouple(void); int db8500_prcmu_gic_recouple(void); +bool db8500_prcmu_gic_pending_irq(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 5bf5c4f0132..16418747dad 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -297,6 +297,14 @@ static inline int prcmu_gic_recouple(void) return db8500_prcmu_gic_recouple(); } +static inline bool prcmu_gic_pending_irq(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_gic_pending_irq(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { if (cpu_is_u5500()) -- cgit v1.2.3-70-g09d2 From 9f60d33e1811e0aa696a3152050d6e3e4c3195aa Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 28 Feb 2012 22:46:07 +0100 Subject: mfd : Copy the db8500 gic setting to the prcmu In the case we go to the retention mode, we decoupled the gic in order to have the A9 core to reach a stable WFI state. But we want the prcmu to wake up the A9 when the gic has a pending irq which is done by copying the gic settings to the to the prcmu. Signed-off-by: Daniel Lezcano Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 20 ++++++++++++++++++++ include/linux/mfd/db8500-prcmu.h | 1 + include/linux/mfd/dbx500-prcmu.h | 8 ++++++++ 3 files changed, 29 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 8346a0e3994..97341aa4025 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -883,6 +883,26 @@ bool db8500_prcmu_gic_pending_irq(void) return false; } +/* + * This function copies the gic SPI settings to the prcmu in order to + * monitor them and abort/finish the retention/off sequence or state. + */ +int db8500_prcmu_copy_gic_settings(void) +{ + u32 er; /* Enable register */ + void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); + int i; + + /* We skip the STI and PPI */ + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + er = readl_relaxed(dist_base + + GIC_DIST_ENABLE_SET + (i + 1) * 4); + writel(er, PRCM_ARMITMSK31TO0 + i * 4); + } + + return 0; +} + /* This function should only be called while mb0_transfer.lock is held. */ static void config_wakeups(void) { diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 92dac13b9ee..a5915852176 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -582,6 +582,7 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); u8 db8500_prcmu_get_power_state_result(void); int db8500_prcmu_gic_decouple(void); int db8500_prcmu_gic_recouple(void); +int db8500_prcmu_copy_gic_settings(void); bool db8500_prcmu_gic_pending_irq(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 16418747dad..f8429cad0db 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -305,6 +305,14 @@ static inline bool prcmu_gic_pending_irq(void) return db8500_prcmu_gic_pending_irq(); } +static inline int prcmu_copy_gic_settings(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_copy_gic_settings(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { if (cpu_is_u5500()) -- cgit v1.2.3-70-g09d2 From 9ab492e12d588af7b05892c3744e8bdc2eace6d0 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 28 Feb 2012 22:46:08 +0100 Subject: mfd : Check if the db8500 prcmu has pending irq This patch allows to check if there are some pending irqs on the prcmu. Signed-off-by: Daniel Lezcano Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 20 ++++++++++++++++++++ include/linux/mfd/db8500-prcmu.h | 1 + include/linux/mfd/dbx500-prcmu.h | 8 ++++++++ 3 files changed, 29 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 97341aa4025..4e27db841fa 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -883,6 +883,26 @@ bool db8500_prcmu_gic_pending_irq(void) return false; } +/* + * This function checks if there are pending interrupt on the + * prcmu which has been delegated to monitor the irqs with the + * db8500_prcmu_copy_gic_settings function. + */ +bool db8500_prcmu_pending_irq(void) +{ + u32 it, im; + int i; + + for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) { + it = readl(PRCM_ARMITVAL31TO0 + i * 4); + im = readl(PRCM_ARMITMSK31TO0 + i * 4); + if (it & im) + return true; /* There is a pending interrupt */ + } + + return false; +} + /* * This function copies the gic SPI settings to the prcmu in order to * monitor them and abort/finish the retention/off sequence or state. diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index a5915852176..926bdb3adc0 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -584,6 +584,7 @@ int db8500_prcmu_gic_decouple(void); int db8500_prcmu_gic_recouple(void); int db8500_prcmu_copy_gic_settings(void); bool db8500_prcmu_gic_pending_irq(void); +bool db8500_prcmu_pending_irq(void); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index f8429cad0db..5c72c07e20e 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -313,6 +313,14 @@ static inline int prcmu_copy_gic_settings(void) return db8500_prcmu_copy_gic_settings(); } +static inline bool prcmu_pending_irq(void) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_pending_irq(); +} + static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { if (cpu_is_u5500()) -- cgit v1.2.3-70-g09d2 From 34fe6f107eab096ac2f70a51763e9978b4abbeb6 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Tue, 28 Feb 2012 22:46:09 +0100 Subject: mfd : Check if the other db8500 core is in WFI This patch allows to check if the other core is in WFI mode. It is the last check the idle routine has to do before entering into the retention state. Signed-off-by: Daniel Lezcano Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 12 ++++++++++++ drivers/mfd/dbx500-prcmu-regs.h | 2 ++ include/linux/mfd/db8500-prcmu.h | 1 + include/linux/mfd/dbx500-prcmu.h | 8 ++++++++ 4 files changed, 23 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 4e27db841fa..a1b3464cdba 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -903,6 +903,18 @@ bool db8500_prcmu_pending_irq(void) return false; } +/* + * This function checks if the specified cpu is in in WFI. It's usage + * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple + * function. Of course passing smp_processor_id() to this function will + * always return false... + */ +bool db8500_prcmu_is_cpu_in_wfi(int cpu) +{ + return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : + PRCM_ARM_WFI_STANDBY_WFI0; +} + /* * This function copies the gic SPI settings to the prcmu in order to * monitor them and abort/finish the retention/off sequence or state. diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h index b9ab4ce6265..3a0bf91d778 100644 --- a/drivers/mfd/dbx500-prcmu-regs.h +++ b/drivers/mfd/dbx500-prcmu-regs.h @@ -79,6 +79,8 @@ /* ARM WFI Standby signal register */ #define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCM_ARM_WFI_STANDBY_WFI0 0x08 +#define PRCM_ARM_WFI_STANDBY_WFI1 0x10 #define PRCM_IOCR (_PRCMU_BASE + 0x310) #define PRCM_IOCR_IOFORCE 0x1 diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 926bdb3adc0..048a534fde3 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -585,6 +585,7 @@ int db8500_prcmu_gic_recouple(void); int db8500_prcmu_copy_gic_settings(void); bool db8500_prcmu_gic_pending_irq(void); bool db8500_prcmu_pending_irq(void); +bool db8500_prcmu_is_cpu_in_wfi(int cpu); void db8500_prcmu_enable_wakeups(u32 wakeups); int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); int db8500_prcmu_request_clock(u8 clock, bool enable); diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 5c72c07e20e..eaa99a02178 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -305,6 +305,14 @@ static inline bool prcmu_gic_pending_irq(void) return db8500_prcmu_gic_pending_irq(); } +static inline bool prcmu_is_cpu_in_wfi(int cpu) +{ + if (cpu_is_u5500()) + return -EINVAL; + else + return db8500_prcmu_is_cpu_in_wfi(cpu); +} + static inline int prcmu_copy_gic_settings(void) { if (cpu_is_u5500()) -- cgit v1.2.3-70-g09d2 From 1fa9c4440c151c61eb3309579a85aae22c9adb6d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Feb 2012 10:28:04 +0300 Subject: svcrdma: silence a Sparse warning Sparse complains that the definition function definition and the implementation aren't anotated the same way. Signed-off-by: Dan Carpenter Acked-by: Tom Tucker Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index d205e9f938c..0b8e3e6bdac 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -190,7 +190,7 @@ extern int svc_rdma_xdr_encode_error(struct svcxprt_rdma *, extern void svc_rdma_xdr_encode_write_list(struct rpcrdma_msg *, int); extern void svc_rdma_xdr_encode_reply_array(struct rpcrdma_write_array *, int); extern void svc_rdma_xdr_encode_array_chunk(struct rpcrdma_write_array *, int, - u32, u64, u32); + __be32, __be64, u32); extern void svc_rdma_xdr_encode_reply_header(struct svcxprt_rdma *, struct rpcrdma_msg *, struct rpcrdma_msg *, -- cgit v1.2.3-70-g09d2 From 6365bead25efc84a4cf4aa9b0a7638f8a970cdff Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 9 Jan 2012 21:44:07 +0000 Subject: DMA: sa11x0: add SA-11x0 DMA driver Add support for the SA-11x0 DMA driver, which replaces the private API version in arch/arm/mach-sa1100/dma.c. We model this as a set of virtual DMA channels, one for each request signal, and assign the virtual DMA channel to a physical DMA channel when there is work to be done. This allows DMA users to claim their channels, and hold them while not in use, without affecting the availability of the physical channels. Another advantage over this approach, compared to the private version, is that a channel can be reconfigured on the fly without having to release and re-request it - which for the IrDA driver, allows us to use DMA for SIR mode transmit without eating up three physical channels. As IrDA is half-duplex, we actually only need one physical channel, and this architecture allows us to achieve that. Signed-off-by: Russell King --- drivers/dma/Kconfig | 9 + drivers/dma/Makefile | 1 + drivers/dma/sa11x0-dma.c | 1109 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/sa11x0-dma.h | 24 + 4 files changed, 1143 insertions(+) create mode 100644 drivers/dma/sa11x0-dma.c create mode 100644 include/linux/sa11x0-dma.h (limited to 'include/linux') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index f1a274994bb..4a6c46dea8a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -252,6 +252,15 @@ config EP93XX_DMA help Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. +config DMA_SA11X0 + tristate "SA-11x0 DMA support" + depends on ARCH_SA1100 + select DMA_ENGINE + help + Support the DMA engine found on Intel StrongARM SA-1100 and + SA-1110 SoCs. This DMA engine can only be used with on-chip + devices. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 009a222e828..86b795baba9 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o +obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c new file mode 100644 index 00000000000..16a6b48883c --- /dev/null +++ b/drivers/dma/sa11x0-dma.c @@ -0,0 +1,1109 @@ +/* + * SA11x0 DMAengine support + * + * Copyright (C) 2012 Russell King + * Derived in part from arch/arm/mach-sa1100/dma.c, + * Copyright (C) 2000, 2001 by Nicolas Pitre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NR_PHY_CHAN 6 +#define DMA_ALIGN 3 +#define DMA_MAX_SIZE 0x1fff +#define DMA_CHUNK_SIZE 0x1000 + +#define DMA_DDAR 0x00 +#define DMA_DCSR_S 0x04 +#define DMA_DCSR_C 0x08 +#define DMA_DCSR_R 0x0c +#define DMA_DBSA 0x10 +#define DMA_DBTA 0x14 +#define DMA_DBSB 0x18 +#define DMA_DBTB 0x1c +#define DMA_SIZE 0x20 + +#define DCSR_RUN (1 << 0) +#define DCSR_IE (1 << 1) +#define DCSR_ERROR (1 << 2) +#define DCSR_DONEA (1 << 3) +#define DCSR_STRTA (1 << 4) +#define DCSR_DONEB (1 << 5) +#define DCSR_STRTB (1 << 6) +#define DCSR_BIU (1 << 7) + +#define DDAR_RW (1 << 0) /* 0 = W, 1 = R */ +#define DDAR_E (1 << 1) /* 0 = LE, 1 = BE */ +#define DDAR_BS (1 << 2) /* 0 = BS4, 1 = BS8 */ +#define DDAR_DW (1 << 3) /* 0 = 8b, 1 = 16b */ +#define DDAR_Ser0UDCTr (0x0 << 4) +#define DDAR_Ser0UDCRc (0x1 << 4) +#define DDAR_Ser1SDLCTr (0x2 << 4) +#define DDAR_Ser1SDLCRc (0x3 << 4) +#define DDAR_Ser1UARTTr (0x4 << 4) +#define DDAR_Ser1UARTRc (0x5 << 4) +#define DDAR_Ser2ICPTr (0x6 << 4) +#define DDAR_Ser2ICPRc (0x7 << 4) +#define DDAR_Ser3UARTTr (0x8 << 4) +#define DDAR_Ser3UARTRc (0x9 << 4) +#define DDAR_Ser4MCP0Tr (0xa << 4) +#define DDAR_Ser4MCP0Rc (0xb << 4) +#define DDAR_Ser4MCP1Tr (0xc << 4) +#define DDAR_Ser4MCP1Rc (0xd << 4) +#define DDAR_Ser4SSPTr (0xe << 4) +#define DDAR_Ser4SSPRc (0xf << 4) + +struct sa11x0_dma_sg { + u32 addr; + u32 len; +}; + +struct sa11x0_dma_desc { + struct dma_async_tx_descriptor tx; + u32 ddar; + size_t size; + + /* maybe protected by c->lock */ + struct list_head node; + unsigned sglen; + struct sa11x0_dma_sg sg[0]; +}; + +struct sa11x0_dma_phy; + +struct sa11x0_dma_chan { + struct dma_chan chan; + spinlock_t lock; + dma_cookie_t lc; + + /* protected by c->lock */ + struct sa11x0_dma_phy *phy; + enum dma_status status; + struct list_head desc_submitted; + struct list_head desc_issued; + + /* protected by d->lock */ + struct list_head node; + + u32 ddar; + const char *name; +}; + +struct sa11x0_dma_phy { + void __iomem *base; + struct sa11x0_dma_dev *dev; + unsigned num; + + struct sa11x0_dma_chan *vchan; + + /* Protected by c->lock */ + unsigned sg_load; + struct sa11x0_dma_desc *txd_load; + unsigned sg_done; + struct sa11x0_dma_desc *txd_done; +#ifdef CONFIG_PM_SLEEP + u32 dbs[2]; + u32 dbt[2]; + u32 dcsr; +#endif +}; + +struct sa11x0_dma_dev { + struct dma_device slave; + void __iomem *base; + spinlock_t lock; + struct tasklet_struct task; + struct list_head chan_pending; + struct list_head desc_complete; + struct sa11x0_dma_phy phy[NR_PHY_CHAN]; +}; + +static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct sa11x0_dma_chan, chan); +} + +static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev) +{ + return container_of(dmadev, struct sa11x0_dma_dev, slave); +} + +static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct sa11x0_dma_desc, tx); +} + +static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c) +{ + if (list_empty(&c->desc_issued)) + return NULL; + + return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node); +} + +static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd) +{ + list_del(&txd->node); + p->txd_load = txd; + p->sg_load = 0; + + dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n", + p->num, txd, txd->tx.cookie, txd->ddar); +} + +static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p, + struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = p->txd_load; + struct sa11x0_dma_sg *sg; + void __iomem *base = p->base; + unsigned dbsx, dbtx; + u32 dcsr; + + if (!txd) + return; + + dcsr = readl_relaxed(base + DMA_DCSR_R); + + /* Don't try to load the next transfer if both buffers are started */ + if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) + return; + + if (p->sg_load == txd->sglen) { + struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); + + /* + * We have reached the end of the current descriptor. + * Peek at the next descriptor, and if compatible with + * the current, start processing it. + */ + if (txn && txn->ddar == txd->ddar) { + txd = txn; + sa11x0_dma_start_desc(p, txn); + } else { + p->txd_load = NULL; + return; + } + } + + sg = &txd->sg[p->sg_load++]; + + /* Select buffer to load according to channel status */ + if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) || + ((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) { + dbsx = DMA_DBSA; + dbtx = DMA_DBTA; + dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN; + } else { + dbsx = DMA_DBSB; + dbtx = DMA_DBTB; + dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN; + } + + writel_relaxed(sg->addr, base + dbsx); + writel_relaxed(sg->len, base + dbtx); + writel(dcsr, base + DMA_DCSR_S); + + dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n", + p->num, dcsr, + 'A' + (dbsx == DMA_DBSB), sg->addr, + 'A' + (dbtx == DMA_DBTB), sg->len); +} + +static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p, + struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = p->txd_done; + + if (++p->sg_done == txd->sglen) { + struct sa11x0_dma_dev *d = p->dev; + + dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n", + p->num, p->txd_done, p->txd_done->tx.cookie); + + c->lc = txd->tx.cookie; + + spin_lock(&d->lock); + list_add_tail(&txd->node, &d->desc_complete); + spin_unlock(&d->lock); + + p->sg_done = 0; + p->txd_done = p->txd_load; + + tasklet_schedule(&d->task); + } + + sa11x0_dma_start_sg(p, c); +} + +static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id) +{ + struct sa11x0_dma_phy *p = dev_id; + struct sa11x0_dma_dev *d = p->dev; + struct sa11x0_dma_chan *c; + u32 dcsr; + + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB))) + return IRQ_NONE; + + /* Clear reported status bits */ + writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB), + p->base + DMA_DCSR_C); + + dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr); + + if (dcsr & DCSR_ERROR) { + dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n", + p->num, dcsr, + readl_relaxed(p->base + DMA_DDAR), + readl_relaxed(p->base + DMA_DBSA), + readl_relaxed(p->base + DMA_DBTA), + readl_relaxed(p->base + DMA_DBSB), + readl_relaxed(p->base + DMA_DBTB)); + } + + c = p->vchan; + if (c) { + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + /* + * Now that we're holding the lock, check that the vchan + * really is associated with this pchan before touching the + * hardware. This should always succeed, because we won't + * change p->vchan or c->phy while the channel is actively + * transferring. + */ + if (c->phy == p) { + if (dcsr & DCSR_DONEA) + sa11x0_dma_complete(p, c); + if (dcsr & DCSR_DONEB) + sa11x0_dma_complete(p, c); + } + spin_unlock_irqrestore(&c->lock, flags); + } + + return IRQ_HANDLED; +} + +static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c); + + /* If the issued list is empty, we have no further txds to process */ + if (txd) { + struct sa11x0_dma_phy *p = c->phy; + + sa11x0_dma_start_desc(p, txd); + p->txd_done = txd; + p->sg_done = 0; + + /* The channel should not have any transfers started */ + WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) & + (DCSR_STRTA | DCSR_STRTB)); + + /* Clear the run and start bits before changing DDAR */ + writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB, + p->base + DMA_DCSR_C); + writel_relaxed(txd->ddar, p->base + DMA_DDAR); + + /* Try to start both buffers */ + sa11x0_dma_start_sg(p, c); + sa11x0_dma_start_sg(p, c); + } +} + +static void sa11x0_dma_tasklet(unsigned long arg) +{ + struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg; + struct sa11x0_dma_phy *p; + struct sa11x0_dma_chan *c; + struct sa11x0_dma_desc *txd, *txn; + LIST_HEAD(head); + unsigned pch, pch_alloc = 0; + + dev_dbg(d->slave.dev, "tasklet enter\n"); + + /* Get the completed tx descriptors */ + spin_lock_irq(&d->lock); + list_splice_init(&d->desc_complete, &head); + spin_unlock_irq(&d->lock); + + list_for_each_entry(txd, &head, node) { + c = to_sa11x0_dma_chan(txd->tx.chan); + + dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n", + c, txd, txd->tx.cookie); + + spin_lock_irq(&c->lock); + p = c->phy; + if (p) { + if (!p->txd_done) + sa11x0_dma_start_txd(c); + if (!p->txd_done) { + /* No current txd associated with this channel */ + dev_dbg(d->slave.dev, "pchan %u: free\n", p->num); + + /* Mark this channel free */ + c->phy = NULL; + p->vchan = NULL; + } + } + spin_unlock_irq(&c->lock); + } + + spin_lock_irq(&d->lock); + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + p = &d->phy[pch]; + + if (p->vchan == NULL && !list_empty(&d->chan_pending)) { + c = list_first_entry(&d->chan_pending, + struct sa11x0_dma_chan, node); + list_del_init(&c->node); + + pch_alloc |= 1 << pch; + + /* Mark this channel allocated */ + p->vchan = c; + + dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c); + } + } + spin_unlock_irq(&d->lock); + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + if (pch_alloc & (1 << pch)) { + p = &d->phy[pch]; + c = p->vchan; + + spin_lock_irq(&c->lock); + c->phy = p; + + sa11x0_dma_start_txd(c); + spin_unlock_irq(&c->lock); + } + } + + /* Now free the completed tx descriptor, and call their callbacks */ + list_for_each_entry_safe(txd, txn, &head, node) { + dma_async_tx_callback callback = txd->tx.callback; + void *callback_param = txd->tx.callback_param; + + dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n", + txd, txd->tx.cookie); + + kfree(txd); + + if (callback) + callback(callback_param); + } + + dev_dbg(d->slave.dev, "tasklet exit\n"); +} + + +static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head) +{ + struct sa11x0_dma_desc *txd, *txn; + + list_for_each_entry_safe(txd, txn, head, node) { + dev_dbg(d->slave.dev, "txd %p: freeing\n", txd); + kfree(txd); + } +} + +static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan) +{ + return 0; +} + +static void sa11x0_dma_free_chan_resources(struct dma_chan *chan) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&c->lock, flags); + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + list_splice_tail_init(&c->desc_submitted, &head); + list_splice_tail_init(&c->desc_issued, &head); + spin_unlock_irqrestore(&c->lock, flags); + + sa11x0_dma_desc_free(d, &head); +} + +static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p) +{ + unsigned reg; + u32 dcsr; + + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + + if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA || + (dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU) + reg = DMA_DBSA; + else + reg = DMA_DBSB; + + return readl_relaxed(p->base + reg); +} + +static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + struct sa11x0_dma_phy *p; + struct sa11x0_dma_desc *txd; + dma_cookie_t last_used, last_complete; + unsigned long flags; + enum dma_status ret; + size_t bytes = 0; + + last_used = c->chan.cookie; + last_complete = c->lc; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + if (ret == DMA_SUCCESS) { + dma_set_tx_state(state, last_complete, last_used, 0); + return ret; + } + + spin_lock_irqsave(&c->lock, flags); + p = c->phy; + ret = c->status; + if (p) { + dma_addr_t addr = sa11x0_dma_pos(p); + + dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + + txd = p->txd_done; + if (txd) { + unsigned i; + + for (i = 0; i < txd->sglen; i++) { + dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n", + i, txd->sg[i].addr, txd->sg[i].len); + if (addr >= txd->sg[i].addr && + addr < txd->sg[i].addr + txd->sg[i].len) { + unsigned len; + + len = txd->sg[i].len - + (addr - txd->sg[i].addr); + dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n", + i, len); + bytes += len; + i++; + break; + } + } + for (; i < txd->sglen; i++) { + dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n", + i, txd->sg[i].addr, txd->sg[i].len); + bytes += txd->sg[i].len; + } + } + if (txd != p->txd_load && p->txd_load) + bytes += p->txd_load->size; + } + list_for_each_entry(txd, &c->desc_issued, node) { + bytes += txd->size; + } + spin_unlock_irqrestore(&c->lock, flags); + + dma_set_tx_state(state, last_complete, last_used, bytes); + + dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes); + + return ret; +} + +/* + * Move pending txds to the issued list, and re-init pending list. + * If not already pending, add this channel to the list of pending + * channels and trigger the tasklet to run. + */ +static void sa11x0_dma_issue_pending(struct dma_chan *chan) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + list_splice_tail_init(&c->desc_submitted, &c->desc_issued); + if (!list_empty(&c->desc_issued)) { + spin_lock(&d->lock); + if (!c->phy && list_empty(&c->node)) { + list_add_tail(&c->node, &d->chan_pending); + tasklet_schedule(&d->task); + dev_dbg(d->slave.dev, "vchan %p: issued\n", c); + } + spin_unlock(&d->lock); + } else + dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c); + spin_unlock_irqrestore(&c->lock, flags); +} + +static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan); + struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + c->chan.cookie += 1; + if (c->chan.cookie < 0) + c->chan.cookie = 1; + txd->tx.cookie = c->chan.cookie; + + list_add_tail(&txd->node, &c->desc_submitted); + spin_unlock_irqrestore(&c->lock, flags); + + dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n", + c, txd, txd->tx.cookie); + + return txd->tx.cookie; +} + +static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen, + enum dma_transfer_direction dir, unsigned long flags) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_desc *txd; + struct scatterlist *sgent; + unsigned i, j = sglen; + size_t size = 0; + + /* SA11x0 channels can only operate in their native direction */ + if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) { + dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n", + c, c->ddar, dir); + return NULL; + } + + /* Do not allow zero-sized txds */ + if (sglen == 0) + return NULL; + + for_each_sg(sg, sgent, sglen, i) { + dma_addr_t addr = sg_dma_address(sgent); + unsigned int len = sg_dma_len(sgent); + + if (len > DMA_MAX_SIZE) + j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1; + if (addr & DMA_ALIGN) { + dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n", + c, addr); + return NULL; + } + } + + txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC); + if (!txd) { + dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c); + return NULL; + } + + j = 0; + for_each_sg(sg, sgent, sglen, i) { + dma_addr_t addr = sg_dma_address(sgent); + unsigned len = sg_dma_len(sgent); + + size += len; + + do { + unsigned tlen = len; + + /* + * Check whether the transfer will fit. If not, try + * to split the transfer up such that we end up with + * equal chunks - but make sure that we preserve the + * alignment. This avoids small segments. + */ + if (tlen > DMA_MAX_SIZE) { + unsigned mult = DIV_ROUND_UP(tlen, + DMA_MAX_SIZE & ~DMA_ALIGN); + + tlen = (tlen / mult) & ~DMA_ALIGN; + } + + txd->sg[j].addr = addr; + txd->sg[j].len = tlen; + + addr += tlen; + len -= tlen; + j++; + } while (len); + } + + dma_async_tx_descriptor_init(&txd->tx, &c->chan); + txd->tx.flags = flags; + txd->tx.tx_submit = sa11x0_dma_tx_submit; + txd->ddar = c->ddar; + txd->size = size; + txd->sglen = j; + + dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n", + c, txd, txd->size, txd->sglen); + + return &txd->tx; +} + +static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg) +{ + u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW); + dma_addr_t addr; + enum dma_slave_buswidth width; + u32 maxburst; + + if (ddar & DDAR_RW) { + addr = cfg->src_addr; + width = cfg->src_addr_width; + maxburst = cfg->src_maxburst; + } else { + addr = cfg->dst_addr; + width = cfg->dst_addr_width; + maxburst = cfg->dst_maxburst; + } + + if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE && + width != DMA_SLAVE_BUSWIDTH_2_BYTES) || + (maxburst != 4 && maxburst != 8)) + return -EINVAL; + + if (width == DMA_SLAVE_BUSWIDTH_2_BYTES) + ddar |= DDAR_DW; + if (maxburst == 8) + ddar |= DDAR_BS; + + dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n", + c, addr, width, maxburst); + + c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6; + + return 0; +} + +static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + struct sa11x0_dma_phy *p; + LIST_HEAD(head); + unsigned long flags; + int ret; + + switch (cmd) { + case DMA_SLAVE_CONFIG: + return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg); + + case DMA_TERMINATE_ALL: + dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c); + /* Clear the tx descriptor lists */ + spin_lock_irqsave(&c->lock, flags); + list_splice_tail_init(&c->desc_submitted, &head); + list_splice_tail_init(&c->desc_issued, &head); + + p = c->phy; + if (p) { + struct sa11x0_dma_desc *txd, *txn; + + dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num); + /* vchan is assigned to a pchan - stop the channel */ + writel(DCSR_RUN | DCSR_IE | + DCSR_STRTA | DCSR_DONEA | + DCSR_STRTB | DCSR_DONEB, + p->base + DMA_DCSR_C); + + list_for_each_entry_safe(txd, txn, &d->desc_complete, node) + if (txd->tx.chan == &c->chan) + list_move(&txd->node, &head); + + if (p->txd_load) { + if (p->txd_load != p->txd_done) + list_add_tail(&p->txd_load->node, &head); + p->txd_load = NULL; + } + if (p->txd_done) { + list_add_tail(&p->txd_done->node, &head); + p->txd_done = NULL; + } + c->phy = NULL; + spin_lock(&d->lock); + p->vchan = NULL; + spin_unlock(&d->lock); + tasklet_schedule(&d->task); + } + spin_unlock_irqrestore(&c->lock, flags); + sa11x0_dma_desc_free(d, &head); + ret = 0; + break; + + case DMA_PAUSE: + dev_dbg(d->slave.dev, "vchan %p: pause\n", c); + spin_lock_irqsave(&c->lock, flags); + if (c->status == DMA_IN_PROGRESS) { + c->status = DMA_PAUSED; + + p = c->phy; + if (p) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C); + } else { + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + } + } + spin_unlock_irqrestore(&c->lock, flags); + ret = 0; + break; + + case DMA_RESUME: + dev_dbg(d->slave.dev, "vchan %p: resume\n", c); + spin_lock_irqsave(&c->lock, flags); + if (c->status == DMA_PAUSED) { + c->status = DMA_IN_PROGRESS; + + p = c->phy; + if (p) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S); + } else if (!list_empty(&c->desc_issued)) { + spin_lock(&d->lock); + list_add_tail(&c->node, &d->chan_pending); + spin_unlock(&d->lock); + } + } + spin_unlock_irqrestore(&c->lock, flags); + ret = 0; + break; + + default: + ret = -ENXIO; + break; + } + + return ret; +} + +struct sa11x0_dma_channel_desc { + u32 ddar; + const char *name; +}; + +#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 } +static const struct sa11x0_dma_channel_desc chan_desc[] = { + CD(Ser0UDCTr, 0), + CD(Ser0UDCRc, DDAR_RW), + CD(Ser1SDLCTr, 0), + CD(Ser1SDLCRc, DDAR_RW), + CD(Ser1UARTTr, 0), + CD(Ser1UARTRc, DDAR_RW), + CD(Ser2ICPTr, 0), + CD(Ser2ICPRc, DDAR_RW), + CD(Ser3UARTTr, 0), + CD(Ser3UARTRc, DDAR_RW), + CD(Ser4MCP0Tr, 0), + CD(Ser4MCP0Rc, DDAR_RW), + CD(Ser4MCP1Tr, 0), + CD(Ser4MCP1Rc, DDAR_RW), + CD(Ser4SSPTr, 0), + CD(Ser4SSPRc, DDAR_RW), +}; + +static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev, + struct device *dev) +{ + unsigned i; + + dmadev->chancnt = ARRAY_SIZE(chan_desc); + INIT_LIST_HEAD(&dmadev->channels); + dmadev->dev = dev; + dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources; + dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources; + dmadev->device_control = sa11x0_dma_control; + dmadev->device_tx_status = sa11x0_dma_tx_status; + dmadev->device_issue_pending = sa11x0_dma_issue_pending; + + for (i = 0; i < dmadev->chancnt; i++) { + struct sa11x0_dma_chan *c; + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) { + dev_err(dev, "no memory for channel %u\n", i); + return -ENOMEM; + } + + c->chan.device = dmadev; + c->status = DMA_IN_PROGRESS; + c->ddar = chan_desc[i].ddar; + c->name = chan_desc[i].name; + spin_lock_init(&c->lock); + INIT_LIST_HEAD(&c->desc_submitted); + INIT_LIST_HEAD(&c->desc_issued); + INIT_LIST_HEAD(&c->node); + list_add_tail(&c->chan.device_node, &dmadev->channels); + } + + return dma_async_device_register(dmadev); +} + +static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr, + void *data) +{ + int irq = platform_get_irq(pdev, nr); + + if (irq <= 0) + return -ENXIO; + + return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data); +} + +static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr, + void *data) +{ + int irq = platform_get_irq(pdev, nr); + if (irq > 0) + free_irq(irq, data); +} + +static void sa11x0_dma_free_channels(struct dma_device *dmadev) +{ + struct sa11x0_dma_chan *c, *cn; + + list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) { + list_del(&c->chan.device_node); + kfree(c); + } +} + +static int __devinit sa11x0_dma_probe(struct platform_device *pdev) +{ + struct sa11x0_dma_dev *d; + struct resource *res; + unsigned i; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } + + spin_lock_init(&d->lock); + INIT_LIST_HEAD(&d->chan_pending); + INIT_LIST_HEAD(&d->desc_complete); + + d->base = ioremap(res->start, resource_size(res)); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } + + tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d); + + for (i = 0; i < NR_PHY_CHAN; i++) { + struct sa11x0_dma_phy *p = &d->phy[i]; + + p->dev = d; + p->num = i; + p->base = d->base + i * DMA_SIZE; + writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR | + DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB, + p->base + DMA_DCSR_C); + writel_relaxed(0, p->base + DMA_DDAR); + + ret = sa11x0_dma_request_irq(pdev, i, p); + if (ret) { + while (i) { + i--; + sa11x0_dma_free_irq(pdev, i, &d->phy[i]); + } + goto err_irq; + } + } + + dma_cap_set(DMA_SLAVE, d->slave.cap_mask); + d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg; + ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev); + if (ret) { + dev_warn(d->slave.dev, "failed to register slave async device: %d\n", + ret); + goto err_slave_reg; + } + + platform_set_drvdata(pdev, d); + return 0; + + err_slave_reg: + sa11x0_dma_free_channels(&d->slave); + for (i = 0; i < NR_PHY_CHAN; i++) + sa11x0_dma_free_irq(pdev, i, &d->phy[i]); + err_irq: + tasklet_kill(&d->task); + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; +} + +static int __devexit sa11x0_dma_remove(struct platform_device *pdev) +{ + struct sa11x0_dma_dev *d = platform_get_drvdata(pdev); + unsigned pch; + + dma_async_device_unregister(&d->slave); + + sa11x0_dma_free_channels(&d->slave); + for (pch = 0; pch < NR_PHY_CHAN; pch++) + sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]); + tasklet_kill(&d->task); + iounmap(d->base); + kfree(d); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sa11x0_dma_suspend(struct device *dev) +{ + struct sa11x0_dma_dev *d = dev_get_drvdata(dev); + unsigned pch; + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + struct sa11x0_dma_phy *p = &d->phy[pch]; + u32 dcsr, saved_dcsr; + + dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R); + if (dcsr & DCSR_RUN) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C); + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + } + + saved_dcsr &= DCSR_RUN | DCSR_IE; + if (dcsr & DCSR_BIU) { + p->dbs[0] = readl_relaxed(p->base + DMA_DBSB); + p->dbt[0] = readl_relaxed(p->base + DMA_DBTB); + p->dbs[1] = readl_relaxed(p->base + DMA_DBSA); + p->dbt[1] = readl_relaxed(p->base + DMA_DBTA); + saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) | + (dcsr & DCSR_STRTB ? DCSR_STRTA : 0); + } else { + p->dbs[0] = readl_relaxed(p->base + DMA_DBSA); + p->dbt[0] = readl_relaxed(p->base + DMA_DBTA); + p->dbs[1] = readl_relaxed(p->base + DMA_DBSB); + p->dbt[1] = readl_relaxed(p->base + DMA_DBTB); + saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB); + } + p->dcsr = saved_dcsr; + + writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C); + } + + return 0; +} + +static int sa11x0_dma_resume(struct device *dev) +{ + struct sa11x0_dma_dev *d = dev_get_drvdata(dev); + unsigned pch; + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + struct sa11x0_dma_phy *p = &d->phy[pch]; + struct sa11x0_dma_desc *txd = NULL; + u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R); + + WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN)); + + if (p->txd_done) + txd = p->txd_done; + else if (p->txd_load) + txd = p->txd_load; + + if (!txd) + continue; + + writel_relaxed(txd->ddar, p->base + DMA_DDAR); + + writel_relaxed(p->dbs[0], p->base + DMA_DBSA); + writel_relaxed(p->dbt[0], p->base + DMA_DBTA); + writel_relaxed(p->dbs[1], p->base + DMA_DBSB); + writel_relaxed(p->dbt[1], p->base + DMA_DBTB); + writel_relaxed(p->dcsr, p->base + DMA_DCSR_S); + } + + return 0; +} +#endif + +static const struct dev_pm_ops sa11x0_dma_pm_ops = { + .suspend_noirq = sa11x0_dma_suspend, + .resume_noirq = sa11x0_dma_resume, + .freeze_noirq = sa11x0_dma_suspend, + .thaw_noirq = sa11x0_dma_resume, + .poweroff_noirq = sa11x0_dma_suspend, + .restore_noirq = sa11x0_dma_resume, +}; + +static struct platform_driver sa11x0_dma_driver = { + .driver = { + .name = "sa11x0-dma", + .owner = THIS_MODULE, + .pm = &sa11x0_dma_pm_ops, + }, + .probe = sa11x0_dma_probe, + .remove = __devexit_p(sa11x0_dma_remove), +}; + +bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param) +{ + if (chan->device->dev->driver == &sa11x0_dma_driver.driver) { + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + const char *p = param; + + return !strcmp(c->name, p); + } + return false; +} +EXPORT_SYMBOL(sa11x0_dma_filter_fn); + +static int __init sa11x0_dma_init(void) +{ + return platform_driver_register(&sa11x0_dma_driver); +} +subsys_initcall(sa11x0_dma_init); + +static void __exit sa11x0_dma_exit(void) +{ + platform_driver_unregister(&sa11x0_dma_driver); +} +module_exit(sa11x0_dma_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("SA-11x0 DMA driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sa11x0-dma"); diff --git a/include/linux/sa11x0-dma.h b/include/linux/sa11x0-dma.h new file mode 100644 index 00000000000..65839a58b8e --- /dev/null +++ b/include/linux/sa11x0-dma.h @@ -0,0 +1,24 @@ +/* + * SA11x0 DMA Engine support + * + * Copyright (C) 2012 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_SA11X0_DMA_H +#define __LINUX_SA11X0_DMA_H + +struct dma_chan; + +#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE) +bool sa11x0_dma_filter_fn(struct dma_chan *, void *); +#else +static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d) +{ + return false; +} +#endif + +#endif -- cgit v1.2.3-70-g09d2 From fb03cb6f44236f4bef62a0dda8e025ff5ca51417 Mon Sep 17 00:00:00 2001 From: Takuya Yoshikawa Date: Wed, 8 Feb 2012 12:59:10 +0900 Subject: KVM: Introduce gfn_to_index() which returns the index for a given level This patch cleans up the code and removes the "(void)level;" warning suppressor. Note that we can also use this for PT_PAGE_TABLE_LEVEL to treat every level uniformly later. Signed-off-by: Takuya Yoshikawa Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 3 +-- include/linux/kvm_host.h | 7 +++++++ virt/kvm/kvm_main.c | 7 +------ 3 files changed, 9 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index ae76cc3392e..37e7f100a0e 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -688,8 +688,7 @@ static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn, { unsigned long idx; - idx = (gfn >> KVM_HPAGE_GFN_SHIFT(level)) - - (slot->base_gfn >> KVM_HPAGE_GFN_SHIFT(level)); + idx = gfn_to_index(gfn, slot->base_gfn, level); return &slot->lpage_info[level - 2][idx]; } diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 9698080c902..7a08496b974 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -681,6 +681,13 @@ static inline int memslot_id(struct kvm *kvm, gfn_t gfn) return gfn_to_memslot(kvm, gfn)->id; } +static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level) +{ + /* KVM_HPAGE_GFN_SHIFT(PT_PAGE_TABLE_LEVEL) must be 0. */ + return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) - + (base_gfn >> KVM_HPAGE_GFN_SHIFT(level)); +} + static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) { diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 470e30520fe..415fe816fc1 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -784,15 +784,10 @@ int __kvm_set_memory_region(struct kvm *kvm, int lpages; int level = i + 2; - /* Avoid unused variable warning if no large pages */ - (void)level; - if (new.lpage_info[i]) continue; - lpages = 1 + ((base_gfn + npages - 1) - >> KVM_HPAGE_GFN_SHIFT(level)); - lpages -= base_gfn >> KVM_HPAGE_GFN_SHIFT(level); + lpages = gfn_to_index(base_gfn + npages - 1, base_gfn, level) + 1; new.lpage_info[i] = vzalloc(lpages * sizeof(*new.lpage_info[i])); -- cgit v1.2.3-70-g09d2 From db3fe4eb45f3555d91a7124e18cf3a2f2a30eb90 Mon Sep 17 00:00:00 2001 From: Takuya Yoshikawa Date: Wed, 8 Feb 2012 13:02:18 +0900 Subject: KVM: Introduce kvm_memory_slot::arch and move lpage_info into it Some members of kvm_memory_slot are not used by every architecture. This patch is the first step to make this difference clear by introducing kvm_memory_slot::arch; lpage_info is moved into it. Signed-off-by: Takuya Yoshikawa Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/ia64/include/asm/kvm_host.h | 3 ++ arch/ia64/kvm/kvm-ia64.c | 10 ++++++ arch/powerpc/include/asm/kvm_host.h | 3 ++ arch/powerpc/kvm/powerpc.c | 10 ++++++ arch/s390/include/asm/kvm_host.h | 3 ++ arch/s390/kvm/kvm-s390.c | 10 ++++++ arch/x86/include/asm/kvm_host.h | 9 +++++ arch/x86/kvm/mmu.c | 2 +- arch/x86/kvm/x86.c | 59 +++++++++++++++++++++++++++++++ include/linux/kvm_host.h | 11 +++--- virt/kvm/kvm_main.c | 70 +++++-------------------------------- 11 files changed, 122 insertions(+), 68 deletions(-) (limited to 'include/linux') diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h index 2689ee54a1c..e35b3a84a40 100644 --- a/arch/ia64/include/asm/kvm_host.h +++ b/arch/ia64/include/asm/kvm_host.h @@ -459,6 +459,9 @@ struct kvm_sal_data { unsigned long boot_gp; }; +struct kvm_arch_memory_slot { +}; + struct kvm_arch { spinlock_t dirty_log_lock; diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 8ca7261e7b3..d8ddbba6fe7 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1571,6 +1571,16 @@ int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) return VM_FAULT_SIGBUS; } +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ +} + +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages) +{ + return 0; +} + int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 1843d5d2a3b..52eb9c1f4fe 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -213,6 +213,9 @@ struct revmap_entry { #define KVMPPC_PAGE_WRITETHRU HPTE_R_W /* 0x40 */ #define KVMPPC_GOT_PAGE 0x80 +struct kvm_arch_memory_slot { +}; + struct kvm_arch { #ifdef CONFIG_KVM_BOOK3S_64_HV unsigned long hpt_virt; diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 0e21d155eea..00d7e345b3f 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -281,6 +281,16 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ +} + +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages) +{ + return 0; +} + int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index e6304268ea2..7343872890a 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -245,6 +245,9 @@ struct kvm_vm_stat { u32 remote_tlb_flush; }; +struct kvm_arch_memory_slot { +}; + struct kvm_arch{ struct sca_block *sca; debug_info_t *dbf; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index cf3c0a91d04..17ad69d596f 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -814,6 +814,16 @@ int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) return VM_FAULT_SIGBUS; } +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ +} + +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages) +{ + return 0; +} + /* Section: memory related */ int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index c24125cd0c6..74c9edf2bb1 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -483,6 +483,15 @@ struct kvm_vcpu_arch { } osvw; }; +struct kvm_lpage_info { + unsigned long rmap_pde; + int write_count; +}; + +struct kvm_arch_memory_slot { + struct kvm_lpage_info *lpage_info[KVM_NR_PAGE_SIZES - 1]; +}; + struct kvm_arch { unsigned int n_used_mmu_pages; unsigned int n_requested_mmu_pages; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 37e7f100a0e..ff053ca3230 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -689,7 +689,7 @@ static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn, unsigned long idx; idx = gfn_to_index(gfn, slot->base_gfn, level); - return &slot->lpage_info[level - 2][idx]; + return &slot->arch.lpage_info[level - 2][idx]; } static void account_shadowed(struct kvm *kvm, gfn_t gfn) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 3df0b7a140b..ca74c1dadf3 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6239,6 +6239,65 @@ void kvm_arch_destroy_vm(struct kvm *kvm) put_page(kvm->arch.ept_identity_pagetable); } +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ + int i; + + for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) { + if (!dont || free->arch.lpage_info[i] != dont->arch.lpage_info[i]) { + vfree(free->arch.lpage_info[i]); + free->arch.lpage_info[i] = NULL; + } + } +} + +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages) +{ + int i; + + for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) { + unsigned long ugfn; + int lpages; + int level = i + 2; + + lpages = gfn_to_index(slot->base_gfn + npages - 1, + slot->base_gfn, level) + 1; + + slot->arch.lpage_info[i] = + vzalloc(lpages * sizeof(*slot->arch.lpage_info[i])); + if (!slot->arch.lpage_info[i]) + goto out_free; + + if (slot->base_gfn & (KVM_PAGES_PER_HPAGE(level) - 1)) + slot->arch.lpage_info[i][0].write_count = 1; + if ((slot->base_gfn + npages) & (KVM_PAGES_PER_HPAGE(level) - 1)) + slot->arch.lpage_info[i][lpages - 1].write_count = 1; + ugfn = slot->userspace_addr >> PAGE_SHIFT; + /* + * If the gfn and userspace address are not aligned wrt each + * other, or if explicitly asked to, disable large page + * support for this slot + */ + if ((slot->base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE(level) - 1) || + !kvm_largepages_enabled()) { + unsigned long j; + + for (j = 0; j < lpages; ++j) + slot->arch.lpage_info[i][j].write_count = 1; + } + } + + return 0; + +out_free: + for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) { + vfree(slot->arch.lpage_info[i]); + slot->arch.lpage_info[i] = NULL; + } + return -ENOMEM; +} + int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 7a08496b974..355e44555c3 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -171,11 +171,6 @@ static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu) */ #define KVM_MEM_MAX_NR_PAGES ((1UL << 31) - 1) -struct kvm_lpage_info { - unsigned long rmap_pde; - int write_count; -}; - struct kvm_memory_slot { gfn_t base_gfn; unsigned long npages; @@ -184,7 +179,7 @@ struct kvm_memory_slot { unsigned long *dirty_bitmap; unsigned long *dirty_bitmap_head; unsigned long nr_dirty_pages; - struct kvm_lpage_info *lpage_info[KVM_NR_PAGE_SIZES - 1]; + struct kvm_arch_memory_slot arch; unsigned long userspace_addr; int user_alloc; int id; @@ -376,6 +371,9 @@ int kvm_set_memory_region(struct kvm *kvm, int __kvm_set_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, int user_alloc); +void kvm_arch_free_memslot(struct kvm_memory_slot *free, + struct kvm_memory_slot *dont); +int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages); int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, struct kvm_memory_slot old, @@ -385,6 +383,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, struct kvm_memory_slot old, int user_alloc); +bool kvm_largepages_enabled(void); void kvm_disable_largepages(void); void kvm_arch_flush_shadow(struct kvm *kvm); diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index a30447c5eb4..8340e0e6203 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -535,21 +535,13 @@ static void kvm_destroy_dirty_bitmap(struct kvm_memory_slot *memslot) static void kvm_free_physmem_slot(struct kvm_memory_slot *free, struct kvm_memory_slot *dont) { - int i; - if (!dont || free->rmap != dont->rmap) vfree(free->rmap); if (!dont || free->dirty_bitmap != dont->dirty_bitmap) kvm_destroy_dirty_bitmap(free); - - for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) { - if (!dont || free->lpage_info[i] != dont->lpage_info[i]) { - vfree(free->lpage_info[i]); - free->lpage_info[i] = NULL; - } - } + kvm_arch_free_memslot(free, dont); free->npages = 0; free->rmap = NULL; @@ -685,53 +677,6 @@ void update_memslots(struct kvm_memslots *slots, struct kvm_memory_slot *new) slots->generation++; } -#ifndef CONFIG_S390 -static int create_lpage_info(struct kvm_memory_slot *slot, unsigned long npages) -{ - int i; - - for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) { - unsigned long ugfn; - int lpages; - int level = i + 2; - - lpages = gfn_to_index(slot->base_gfn + npages - 1, - slot->base_gfn, level) + 1; - - slot->lpage_info[i] = vzalloc(lpages * sizeof(*slot->lpage_info[i])); - if (!slot->lpage_info[i]) - goto out_free; - - if (slot->base_gfn & (KVM_PAGES_PER_HPAGE(level) - 1)) - slot->lpage_info[i][0].write_count = 1; - if ((slot->base_gfn + npages) & (KVM_PAGES_PER_HPAGE(level) - 1)) - slot->lpage_info[i][lpages - 1].write_count = 1; - ugfn = slot->userspace_addr >> PAGE_SHIFT; - /* - * If the gfn and userspace address are not aligned wrt each - * other, or if explicitly asked to, disable large page - * support for this slot - */ - if ((slot->base_gfn ^ ugfn) & (KVM_PAGES_PER_HPAGE(level) - 1) || - !largepages_enabled) { - unsigned long j; - - for (j = 0; j < lpages; ++j) - slot->lpage_info[i][j].write_count = 1; - } - } - - return 0; - -out_free: - for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) { - vfree(slot->lpage_info[i]); - slot->lpage_info[i] = NULL; - } - return -ENOMEM; -} -#endif /* not defined CONFIG_S390 */ - /* * Allocate some memory and give it an address in the guest physical address * space. @@ -819,10 +764,9 @@ int __kvm_set_memory_region(struct kvm *kvm, new.rmap = vzalloc(npages * sizeof(*new.rmap)); if (!new.rmap) goto out_free; - - if (create_lpage_info(&new, npages)) - goto out_free; #endif /* not defined CONFIG_S390 */ + if (kvm_arch_create_memslot(&new, npages)) + goto out_free; } /* Allocate page dirty bitmap if needed */ @@ -880,8 +824,7 @@ int __kvm_set_memory_region(struct kvm *kvm, if (!npages) { new.rmap = NULL; new.dirty_bitmap = NULL; - for (i = 0; i < KVM_NR_PAGE_SIZES - 1; ++i) - new.lpage_info[i] = NULL; + memset(&new.arch, 0, sizeof(new.arch)); } update_memslots(slots, &new); @@ -968,6 +911,11 @@ out: return r; } +bool kvm_largepages_enabled(void) +{ + return largepages_enabled; +} + void kvm_disable_largepages(void) { largepages_enabled = false; -- cgit v1.2.3-70-g09d2 From 3e515705a1f46beb1c942bb8043c16f8ac7b1e9e Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Mon, 5 Mar 2012 14:23:29 +0200 Subject: KVM: Ensure all vcpus are consistent with in-kernel irqchip settings If some vcpus are created before KVM_CREATE_IRQCHIP, then irqchip_in_kernel() and vcpu->arch.apic will be inconsistent, leading to potential NULL pointer dereferences. Fix by: - ensuring that no vcpus are installed when KVM_CREATE_IRQCHIP is called - ensuring that a vcpu has an apic if it is installed after KVM_CREATE_IRQCHIP This is somewhat long winded because vcpu->arch.apic is created without kvm->lock held. Based on earlier patch by Michael Ellerman. Signed-off-by: Michael Ellerman Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 5 +++++ arch/x86/kvm/x86.c | 8 ++++++++ include/linux/kvm_host.h | 7 +++++++ virt/kvm/kvm_main.c | 4 ++++ 4 files changed, 24 insertions(+) (limited to 'include/linux') diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index d8ddbba6fe7..f5104b7c52c 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1172,6 +1172,11 @@ out: #define PALE_RESET_ENTRY 0x80000000ffffffb0UL +bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) +{ + return irqchip_in_kernel(vcpu->kcm) == (vcpu->arch.apic != NULL); +} + int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { struct kvm_vcpu *v; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 03a1fd47a6d..9477dc6ccca 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3199,6 +3199,9 @@ long kvm_arch_vm_ioctl(struct file *filp, r = -EEXIST; if (kvm->arch.vpic) goto create_irqchip_unlock; + r = -EINVAL; + if (atomic_read(&kvm->online_vcpus)) + goto create_irqchip_unlock; r = -ENOMEM; vpic = kvm_create_pic(kvm); if (vpic) { @@ -6107,6 +6110,11 @@ void kvm_arch_check_processor_compat(void *rtn) kvm_x86_ops->check_processor_compatibility(rtn); } +bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) +{ + return irqchip_in_kernel(vcpu->kvm) == (vcpu->arch.apic != NULL); +} + int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { struct page *page; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 355e44555c3..e42d85ae854 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -805,6 +805,13 @@ static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) { return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id; } + +bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu); + +#else + +static inline bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { return true; } + #endif #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index e4431ada594..94e148e3871 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1651,6 +1651,10 @@ static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, u32 id) goto vcpu_destroy; mutex_lock(&kvm->lock); + if (!kvm_vcpu_compatible(vcpu)) { + r = -EINVAL; + goto unlock_vcpu_destroy; + } if (atomic_read(&kvm->online_vcpus) == KVM_MAX_VCPUS) { r = -EINVAL; goto unlock_vcpu_destroy; -- cgit v1.2.3-70-g09d2 From 07700a94b00a4fcbbfb07d1b72dc112a0e036735 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Tue, 28 Feb 2012 14:19:54 +0100 Subject: KVM: Allow host IRQ sharing for assigned PCI 2.3 devices PCI 2.3 allows to generically disable IRQ sources at device level. This enables us to share legacy IRQs of such devices with other host devices when passing them to a guest. The new IRQ sharing feature introduced here is optional, user space has to request it explicitly. Moreover, user space can inform us about its view of PCI_COMMAND_INTX_DISABLE so that we can avoid unmasking the interrupt and signaling it if the guest masked it via the virtualized PCI config space. Signed-off-by: Jan Kiszka Acked-by: Alex Williamson Acked-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- Documentation/virtual/kvm/api.txt | 41 ++++++++ arch/x86/kvm/x86.c | 1 + include/linux/kvm.h | 6 ++ include/linux/kvm_host.h | 2 + virt/kvm/assigned-dev.c | 209 ++++++++++++++++++++++++++++++++------ 5 files changed, 230 insertions(+), 29 deletions(-) (limited to 'include/linux') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 59a38264a0e..6386f8c0482 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1169,6 +1169,14 @@ following flags are specified: /* Depends on KVM_CAP_IOMMU */ #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) +/* The following two depend on KVM_CAP_PCI_2_3 */ +#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) +#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) + +If KVM_DEV_ASSIGN_PCI_2_3 is set, the kernel will manage legacy INTx interrupts +via the PCI-2.3-compliant device-level mask, thus enable IRQ sharing with other +assigned devices or host devices. KVM_DEV_ASSIGN_MASK_INTX specifies the +guest's view on the INTx mask, see KVM_ASSIGN_SET_INTX_MASK for details. The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure isolation of the device. Usages not specifying this flag are deprecated. @@ -1441,6 +1449,39 @@ The "num_dirty" field is a performance hint for KVM to determine whether it should skip processing the bitmap and just invalidate everything. It must be set to the number of set bits in the bitmap. +4.60 KVM_ASSIGN_SET_INTX_MASK + +Capability: KVM_CAP_PCI_2_3 +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_assigned_pci_dev (in) +Returns: 0 on success, -1 on error + +Allows userspace to mask PCI INTx interrupts from the assigned device. The +kernel will not deliver INTx interrupts to the guest between setting and +clearing of KVM_ASSIGN_SET_INTX_MASK via this interface. This enables use of +and emulation of PCI 2.3 INTx disable command register behavior. + +This may be used for both PCI 2.3 devices supporting INTx disable natively and +older devices lacking this support. Userspace is responsible for emulating the +read value of the INTx disable bit in the guest visible PCI command register. +When modifying the INTx disable state, userspace should precede updating the +physical device command register by calling this ioctl to inform the kernel of +the new intended INTx mask state. + +Note that the kernel uses the device INTx disable bit to internally manage the +device interrupt state for PCI 2.3 devices. Reads of this register may +therefore not match the expected value. Writes should always use the guest +intended INTx disable value rather than attempting to read-copy-update the +current physical device state. Races between user and kernel updates to the +INTx disable bit are handled lazily in the kernel. It's possible the device +may generate unintended interrupts, but they will not be injected into the +guest. + +See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified +by assigned_dev_id. In the flags field, only KVM_DEV_ASSIGN_MASK_INTX is +evaluated. + 4.62 KVM_CREATE_SPAPR_TCE Capability: KVM_CAP_SPAPR_TCE diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9477dc6ccca..6866083a48c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2143,6 +2143,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_XSAVE: case KVM_CAP_ASYNC_PF: case KVM_CAP_GET_TSC_KHZ: + case KVM_CAP_PCI_2_3: r = 1; break; case KVM_CAP_COALESCED_MMIO: diff --git a/include/linux/kvm.h b/include/linux/kvm.h index acbe4293908..6c322a90b92 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -588,6 +588,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_TSC_DEADLINE_TIMER 72 #define KVM_CAP_S390_UCONTROL 73 #define KVM_CAP_SYNC_REGS 74 +#define KVM_CAP_PCI_2_3 75 #ifdef KVM_CAP_IRQ_ROUTING @@ -784,6 +785,9 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_TSC_CONTROL */ #define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) #define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) +/* Available with KVM_CAP_PCI_2_3 */ +#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \ + struct kvm_assigned_pci_dev) /* * ioctls for vcpu fds @@ -857,6 +861,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) +#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) +#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) struct kvm_assigned_pci_dev { __u32 assigned_dev_id; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index e42d85ae854..ec171c1d087 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -546,6 +546,7 @@ struct kvm_assigned_dev_kernel { unsigned int entries_nr; int host_irq; bool host_irq_disabled; + bool pci_2_3; struct msix_entry *host_msix_entries; int guest_irq; struct msix_entry *guest_msix_entries; @@ -555,6 +556,7 @@ struct kvm_assigned_dev_kernel { struct pci_dev *dev; struct kvm *kvm; spinlock_t intx_lock; + struct mutex intx_mask_lock; char irq_name[32]; struct pci_saved_state *pci_saved_state; }; diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c index ece80612b59..08e05715df7 100644 --- a/virt/kvm/assigned-dev.c +++ b/virt/kvm/assigned-dev.c @@ -55,22 +55,66 @@ static int find_index_from_host_irq(struct kvm_assigned_dev_kernel return index; } -static irqreturn_t kvm_assigned_dev_thread(int irq, void *dev_id) +static irqreturn_t kvm_assigned_dev_intx(int irq, void *dev_id) { struct kvm_assigned_dev_kernel *assigned_dev = dev_id; + int ret; - if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_INTX) { - spin_lock(&assigned_dev->intx_lock); + spin_lock(&assigned_dev->intx_lock); + if (pci_check_and_mask_intx(assigned_dev->dev)) { + assigned_dev->host_irq_disabled = true; + ret = IRQ_WAKE_THREAD; + } else + ret = IRQ_NONE; + spin_unlock(&assigned_dev->intx_lock); + + return ret; +} + +static void +kvm_assigned_dev_raise_guest_irq(struct kvm_assigned_dev_kernel *assigned_dev, + int vector) +{ + if (unlikely(assigned_dev->irq_requested_type & + KVM_DEV_IRQ_GUEST_INTX)) { + mutex_lock(&assigned_dev->intx_mask_lock); + if (!(assigned_dev->flags & KVM_DEV_ASSIGN_MASK_INTX)) + kvm_set_irq(assigned_dev->kvm, + assigned_dev->irq_source_id, vector, 1); + mutex_unlock(&assigned_dev->intx_mask_lock); + } else + kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, + vector, 1); +} + +static irqreturn_t kvm_assigned_dev_thread_intx(int irq, void *dev_id) +{ + struct kvm_assigned_dev_kernel *assigned_dev = dev_id; + + if (!(assigned_dev->flags & KVM_DEV_ASSIGN_PCI_2_3)) { + spin_lock_irq(&assigned_dev->intx_lock); disable_irq_nosync(irq); assigned_dev->host_irq_disabled = true; - spin_unlock(&assigned_dev->intx_lock); + spin_unlock_irq(&assigned_dev->intx_lock); } - kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, - assigned_dev->guest_irq, 1); + kvm_assigned_dev_raise_guest_irq(assigned_dev, + assigned_dev->guest_irq); + + return IRQ_HANDLED; +} + +#ifdef __KVM_HAVE_MSI +static irqreturn_t kvm_assigned_dev_thread_msi(int irq, void *dev_id) +{ + struct kvm_assigned_dev_kernel *assigned_dev = dev_id; + + kvm_assigned_dev_raise_guest_irq(assigned_dev, + assigned_dev->guest_irq); return IRQ_HANDLED; } +#endif #ifdef __KVM_HAVE_MSIX static irqreturn_t kvm_assigned_dev_thread_msix(int irq, void *dev_id) @@ -81,8 +125,7 @@ static irqreturn_t kvm_assigned_dev_thread_msix(int irq, void *dev_id) if (index >= 0) { vector = assigned_dev->guest_msix_entries[index].vector; - kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, - vector, 1); + kvm_assigned_dev_raise_guest_irq(assigned_dev, vector); } return IRQ_HANDLED; @@ -98,15 +141,31 @@ static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) kvm_set_irq(dev->kvm, dev->irq_source_id, dev->guest_irq, 0); - /* The guest irq may be shared so this ack may be - * from another device. - */ - spin_lock(&dev->intx_lock); - if (dev->host_irq_disabled) { - enable_irq(dev->host_irq); - dev->host_irq_disabled = false; + mutex_lock(&dev->intx_mask_lock); + + if (!(dev->flags & KVM_DEV_ASSIGN_MASK_INTX)) { + bool reassert = false; + + spin_lock_irq(&dev->intx_lock); + /* + * The guest IRQ may be shared so this ack can come from an + * IRQ for another guest device. + */ + if (dev->host_irq_disabled) { + if (!(dev->flags & KVM_DEV_ASSIGN_PCI_2_3)) + enable_irq(dev->host_irq); + else if (!pci_check_and_unmask_intx(dev->dev)) + reassert = true; + dev->host_irq_disabled = reassert; + } + spin_unlock_irq(&dev->intx_lock); + + if (reassert) + kvm_set_irq(dev->kvm, dev->irq_source_id, + dev->guest_irq, 1); } - spin_unlock(&dev->intx_lock); + + mutex_unlock(&dev->intx_mask_lock); } static void deassign_guest_irq(struct kvm *kvm, @@ -154,7 +213,15 @@ static void deassign_host_irq(struct kvm *kvm, pci_disable_msix(assigned_dev->dev); } else { /* Deal with MSI and INTx */ - disable_irq(assigned_dev->host_irq); + if ((assigned_dev->irq_requested_type & + KVM_DEV_IRQ_HOST_INTX) && + (assigned_dev->flags & KVM_DEV_ASSIGN_PCI_2_3)) { + spin_lock_irq(&assigned_dev->intx_lock); + pci_intx(assigned_dev->dev, false); + spin_unlock_irq(&assigned_dev->intx_lock); + synchronize_irq(assigned_dev->host_irq); + } else + disable_irq(assigned_dev->host_irq); free_irq(assigned_dev->host_irq, assigned_dev); @@ -235,15 +302,34 @@ void kvm_free_all_assigned_devices(struct kvm *kvm) static int assigned_device_enable_host_intx(struct kvm *kvm, struct kvm_assigned_dev_kernel *dev) { + irq_handler_t irq_handler; + unsigned long flags; + dev->host_irq = dev->dev->irq; - /* Even though this is PCI, we don't want to use shared - * interrupts. Sharing host devices with guest-assigned devices - * on the same interrupt line is not a happy situation: there - * are going to be long delays in accepting, acking, etc. + + /* + * We can only share the IRQ line with other host devices if we are + * able to disable the IRQ source at device-level - independently of + * the guest driver. Otherwise host devices may suffer from unbounded + * IRQ latencies when the guest keeps the line asserted. */ - if (request_threaded_irq(dev->host_irq, NULL, kvm_assigned_dev_thread, - IRQF_ONESHOT, dev->irq_name, dev)) + if (dev->flags & KVM_DEV_ASSIGN_PCI_2_3) { + irq_handler = kvm_assigned_dev_intx; + flags = IRQF_SHARED; + } else { + irq_handler = NULL; + flags = IRQF_ONESHOT; + } + if (request_threaded_irq(dev->host_irq, irq_handler, + kvm_assigned_dev_thread_intx, flags, + dev->irq_name, dev)) return -EIO; + + if (dev->flags & KVM_DEV_ASSIGN_PCI_2_3) { + spin_lock_irq(&dev->intx_lock); + pci_intx(dev->dev, true); + spin_unlock_irq(&dev->intx_lock); + } return 0; } @@ -260,8 +346,9 @@ static int assigned_device_enable_host_msi(struct kvm *kvm, } dev->host_irq = dev->dev->irq; - if (request_threaded_irq(dev->host_irq, NULL, kvm_assigned_dev_thread, - 0, dev->irq_name, dev)) { + if (request_threaded_irq(dev->host_irq, NULL, + kvm_assigned_dev_thread_msi, 0, + dev->irq_name, dev)) { pci_disable_msi(dev->dev); return -EIO; } @@ -319,7 +406,6 @@ static int assigned_device_enable_guest_msi(struct kvm *kvm, { dev->guest_irq = irq->guest_irq; dev->ack_notifier.gsi = -1; - dev->host_irq_disabled = false; return 0; } #endif @@ -331,7 +417,6 @@ static int assigned_device_enable_guest_msix(struct kvm *kvm, { dev->guest_irq = irq->guest_irq; dev->ack_notifier.gsi = -1; - dev->host_irq_disabled = false; return 0; } #endif @@ -365,6 +450,7 @@ static int assign_host_irq(struct kvm *kvm, default: r = -EINVAL; } + dev->host_irq_disabled = false; if (!r) dev->irq_requested_type |= host_irq_type; @@ -466,6 +552,7 @@ static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm, { int r = -ENODEV; struct kvm_assigned_dev_kernel *match; + unsigned long irq_type; mutex_lock(&kvm->lock); @@ -474,7 +561,9 @@ static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm, if (!match) goto out; - r = kvm_deassign_irq(kvm, match, assigned_irq->flags); + irq_type = assigned_irq->flags & (KVM_DEV_IRQ_HOST_MASK | + KVM_DEV_IRQ_GUEST_MASK); + r = kvm_deassign_irq(kvm, match, irq_type); out: mutex_unlock(&kvm->lock); return r; @@ -607,6 +696,10 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, if (!match->pci_saved_state) printk(KERN_DEBUG "%s: Couldn't store %s saved state\n", __func__, dev_name(&dev->dev)); + + if (!pci_intx_mask_supported(dev)) + assigned_dev->flags &= ~KVM_DEV_ASSIGN_PCI_2_3; + match->assigned_dev_id = assigned_dev->assigned_dev_id; match->host_segnr = assigned_dev->segnr; match->host_busnr = assigned_dev->busnr; @@ -614,6 +707,7 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, match->flags = assigned_dev->flags; match->dev = dev; spin_lock_init(&match->intx_lock); + mutex_init(&match->intx_mask_lock); match->irq_source_id = -1; match->kvm = kvm; match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq; @@ -759,6 +853,55 @@ msix_entry_out: } #endif +static int kvm_vm_ioctl_set_pci_irq_mask(struct kvm *kvm, + struct kvm_assigned_pci_dev *assigned_dev) +{ + int r = 0; + struct kvm_assigned_dev_kernel *match; + + mutex_lock(&kvm->lock); + + match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head, + assigned_dev->assigned_dev_id); + if (!match) { + r = -ENODEV; + goto out; + } + + mutex_lock(&match->intx_mask_lock); + + match->flags &= ~KVM_DEV_ASSIGN_MASK_INTX; + match->flags |= assigned_dev->flags & KVM_DEV_ASSIGN_MASK_INTX; + + if (match->irq_requested_type & KVM_DEV_IRQ_GUEST_INTX) { + if (assigned_dev->flags & KVM_DEV_ASSIGN_MASK_INTX) { + kvm_set_irq(match->kvm, match->irq_source_id, + match->guest_irq, 0); + /* + * Masking at hardware-level is performed on demand, + * i.e. when an IRQ actually arrives at the host. + */ + } else if (!(assigned_dev->flags & KVM_DEV_ASSIGN_PCI_2_3)) { + /* + * Unmask the IRQ line if required. Unmasking at + * device level will be performed by user space. + */ + spin_lock_irq(&match->intx_lock); + if (match->host_irq_disabled) { + enable_irq(match->host_irq); + match->host_irq_disabled = false; + } + spin_unlock_irq(&match->intx_lock); + } + } + + mutex_unlock(&match->intx_mask_lock); + +out: + mutex_unlock(&kvm->lock); + return r; +} + long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl, unsigned long arg) { @@ -866,6 +1009,15 @@ long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl, break; } #endif + case KVM_ASSIGN_SET_INTX_MASK: { + struct kvm_assigned_pci_dev assigned_dev; + + r = -EFAULT; + if (copy_from_user(&assigned_dev, argp, sizeof assigned_dev)) + goto out; + r = kvm_vm_ioctl_set_pci_irq_mask(kvm, &assigned_dev); + break; + } default: r = -ENOTTY; break; @@ -873,4 +1025,3 @@ long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl, out: return r; } - -- cgit v1.2.3-70-g09d2 From b7d861d9394534db94f0fb8f4b9d984f996d0528 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Mon, 26 Dec 2011 18:49:52 +0900 Subject: DMA: PL330: Merge PL330 driver into drivers/dma/ Currently there were two part of DMAC PL330 driver for support old styled s3c-pl330 which has been merged into drivers/dma/pl330.c driver. Actually, there is no reason to separate them now. Basically this patch merges arch/arm/common/pl330.c into drivers/dma/pl330.c driver and removes useless exported symbol, externed function and so on. The newer pl330 driver tested on SMDKV310 and SMDK4212 boards Cc: Jassi Brar Cc: Russell King Acked-by: Linus Walleij Acked-by: Vinod Koul Signed-off-by: Boojin Kim Signed-off-by: Kukjin Kim Acked-by: Jassi Brar Signed-off-by: Vinod Koul --- arch/arm/common/Kconfig | 3 - arch/arm/common/Makefile | 1 - arch/arm/common/pl330.c | 1959 ------------------------------ arch/arm/include/asm/hardware/pl330.h | 217 ---- drivers/dma/Kconfig | 1 - drivers/dma/pl330.c | 2114 ++++++++++++++++++++++++++++++++- include/linux/amba/pl330.h | 1 - 7 files changed, 2113 insertions(+), 2183 deletions(-) delete mode 100644 arch/arm/common/pl330.c delete mode 100644 arch/arm/include/asm/hardware/pl330.h (limited to 'include/linux') diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 81a933eb090..a43c758ff0d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -24,9 +24,6 @@ config ARM_VIC_NR config ICST bool -config PL330 - bool - config SA1111 bool select DMABOUNCE if !ARCH_PXA diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 6ea9b6f3607..107d6d97c6e 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST) += icst.o -obj-$(CONFIG_PL330) += pl330.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c deleted file mode 100644 index d8e44a43047..00000000000 --- a/arch/arm/common/pl330.c +++ /dev/null @@ -1,1959 +0,0 @@ -/* linux/arch/arm/common/pl330.c - * - * Copyright (C) 2010 Samsung Electronics Co Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Register and Bit field Definitions */ -#define DS 0x0 -#define DS_ST_STOP 0x0 -#define DS_ST_EXEC 0x1 -#define DS_ST_CMISS 0x2 -#define DS_ST_UPDTPC 0x3 -#define DS_ST_WFE 0x4 -#define DS_ST_ATBRR 0x5 -#define DS_ST_QBUSY 0x6 -#define DS_ST_WFP 0x7 -#define DS_ST_KILL 0x8 -#define DS_ST_CMPLT 0x9 -#define DS_ST_FLTCMP 0xe -#define DS_ST_FAULT 0xf - -#define DPC 0x4 -#define INTEN 0x20 -#define ES 0x24 -#define INTSTATUS 0x28 -#define INTCLR 0x2c -#define FSM 0x30 -#define FSC 0x34 -#define FTM 0x38 - -#define _FTC 0x40 -#define FTC(n) (_FTC + (n)*0x4) - -#define _CS 0x100 -#define CS(n) (_CS + (n)*0x8) -#define CS_CNS (1 << 21) - -#define _CPC 0x104 -#define CPC(n) (_CPC + (n)*0x8) - -#define _SA 0x400 -#define SA(n) (_SA + (n)*0x20) - -#define _DA 0x404 -#define DA(n) (_DA + (n)*0x20) - -#define _CC 0x408 -#define CC(n) (_CC + (n)*0x20) - -#define CC_SRCINC (1 << 0) -#define CC_DSTINC (1 << 14) -#define CC_SRCPRI (1 << 8) -#define CC_DSTPRI (1 << 22) -#define CC_SRCNS (1 << 9) -#define CC_DSTNS (1 << 23) -#define CC_SRCIA (1 << 10) -#define CC_DSTIA (1 << 24) -#define CC_SRCBRSTLEN_SHFT 4 -#define CC_DSTBRSTLEN_SHFT 18 -#define CC_SRCBRSTSIZE_SHFT 1 -#define CC_DSTBRSTSIZE_SHFT 15 -#define CC_SRCCCTRL_SHFT 11 -#define CC_SRCCCTRL_MASK 0x7 -#define CC_DSTCCTRL_SHFT 25 -#define CC_DRCCCTRL_MASK 0x7 -#define CC_SWAP_SHFT 28 - -#define _LC0 0x40c -#define LC0(n) (_LC0 + (n)*0x20) - -#define _LC1 0x410 -#define LC1(n) (_LC1 + (n)*0x20) - -#define DBGSTATUS 0xd00 -#define DBG_BUSY (1 << 0) - -#define DBGCMD 0xd04 -#define DBGINST0 0xd08 -#define DBGINST1 0xd0c - -#define CR0 0xe00 -#define CR1 0xe04 -#define CR2 0xe08 -#define CR3 0xe0c -#define CR4 0xe10 -#define CRD 0xe14 - -#define PERIPH_ID 0xfe0 -#define PCELL_ID 0xff0 - -#define CR0_PERIPH_REQ_SET (1 << 0) -#define CR0_BOOT_EN_SET (1 << 1) -#define CR0_BOOT_MAN_NS (1 << 2) -#define CR0_NUM_CHANS_SHIFT 4 -#define CR0_NUM_CHANS_MASK 0x7 -#define CR0_NUM_PERIPH_SHIFT 12 -#define CR0_NUM_PERIPH_MASK 0x1f -#define CR0_NUM_EVENTS_SHIFT 17 -#define CR0_NUM_EVENTS_MASK 0x1f - -#define CR1_ICACHE_LEN_SHIFT 0 -#define CR1_ICACHE_LEN_MASK 0x7 -#define CR1_NUM_ICACHELINES_SHIFT 4 -#define CR1_NUM_ICACHELINES_MASK 0xf - -#define CRD_DATA_WIDTH_SHIFT 0 -#define CRD_DATA_WIDTH_MASK 0x7 -#define CRD_WR_CAP_SHIFT 4 -#define CRD_WR_CAP_MASK 0x7 -#define CRD_WR_Q_DEP_SHIFT 8 -#define CRD_WR_Q_DEP_MASK 0xf -#define CRD_RD_CAP_SHIFT 12 -#define CRD_RD_CAP_MASK 0x7 -#define CRD_RD_Q_DEP_SHIFT 16 -#define CRD_RD_Q_DEP_MASK 0xf -#define CRD_DATA_BUFF_SHIFT 20 -#define CRD_DATA_BUFF_MASK 0x3ff - -#define PART 0x330 -#define DESIGNER 0x41 -#define REVISION 0x0 -#define INTEG_CFG 0x0 -#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) - -#define PCELL_ID_VAL 0xb105f00d - -#define PL330_STATE_STOPPED (1 << 0) -#define PL330_STATE_EXECUTING (1 << 1) -#define PL330_STATE_WFE (1 << 2) -#define PL330_STATE_FAULTING (1 << 3) -#define PL330_STATE_COMPLETING (1 << 4) -#define PL330_STATE_WFP (1 << 5) -#define PL330_STATE_KILLING (1 << 6) -#define PL330_STATE_FAULT_COMPLETING (1 << 7) -#define PL330_STATE_CACHEMISS (1 << 8) -#define PL330_STATE_UPDTPC (1 << 9) -#define PL330_STATE_ATBARRIER (1 << 10) -#define PL330_STATE_QUEUEBUSY (1 << 11) -#define PL330_STATE_INVALID (1 << 15) - -#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ - | PL330_STATE_WFE | PL330_STATE_FAULTING) - -#define CMD_DMAADDH 0x54 -#define CMD_DMAEND 0x00 -#define CMD_DMAFLUSHP 0x35 -#define CMD_DMAGO 0xa0 -#define CMD_DMALD 0x04 -#define CMD_DMALDP 0x25 -#define CMD_DMALP 0x20 -#define CMD_DMALPEND 0x28 -#define CMD_DMAKILL 0x01 -#define CMD_DMAMOV 0xbc -#define CMD_DMANOP 0x18 -#define CMD_DMARMB 0x12 -#define CMD_DMASEV 0x34 -#define CMD_DMAST 0x08 -#define CMD_DMASTP 0x29 -#define CMD_DMASTZ 0x0c -#define CMD_DMAWFE 0x36 -#define CMD_DMAWFP 0x30 -#define CMD_DMAWMB 0x13 - -#define SZ_DMAADDH 3 -#define SZ_DMAEND 1 -#define SZ_DMAFLUSHP 2 -#define SZ_DMALD 1 -#define SZ_DMALDP 2 -#define SZ_DMALP 2 -#define SZ_DMALPEND 2 -#define SZ_DMAKILL 1 -#define SZ_DMAMOV 6 -#define SZ_DMANOP 1 -#define SZ_DMARMB 1 -#define SZ_DMASEV 2 -#define SZ_DMAST 1 -#define SZ_DMASTP 2 -#define SZ_DMASTZ 1 -#define SZ_DMAWFE 2 -#define SZ_DMAWFP 2 -#define SZ_DMAWMB 1 -#define SZ_DMAGO 6 - -#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) -#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) - -#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) -#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) - -/* - * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req - * at 1byte/burst for P<->M and M<->M respectively. - * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req - * should be enough for P<->M and M<->M respectively. - */ -#define MCODE_BUFF_PER_REQ 256 - -/* If the _pl330_req is available to the client */ -#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) - -/* Use this _only_ to wait on transient states */ -#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); - -#ifdef PL330_DEBUG_MCGEN -static unsigned cmd_line; -#define PL330_DBGCMD_DUMP(off, x...) do { \ - printk("%x:", cmd_line); \ - printk(x); \ - cmd_line += off; \ - } while (0) -#define PL330_DBGMC_START(addr) (cmd_line = addr) -#else -#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) -#define PL330_DBGMC_START(addr) do {} while (0) -#endif - -struct _xfer_spec { - u32 ccr; - struct pl330_req *r; - struct pl330_xfer *x; -}; - -enum dmamov_dst { - SAR = 0, - CCR, - DAR, -}; - -enum pl330_dst { - SRC = 0, - DST, -}; - -enum pl330_cond { - SINGLE, - BURST, - ALWAYS, -}; - -struct _pl330_req { - u32 mc_bus; - void *mc_cpu; - /* Number of bytes taken to setup MC for the req */ - u32 mc_len; - struct pl330_req *r; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; -}; - -/* ToBeDone for tasklet */ -struct _pl330_tbd { - bool reset_dmac; - bool reset_mngr; - u8 reset_chan; -}; - -/* A DMAC Thread */ -struct pl330_thread { - u8 id; - int ev; - /* If the channel is not yet acquired by any client */ - bool free; - /* Parent DMAC */ - struct pl330_dmac *dmac; - /* Only two at a time */ - struct _pl330_req req[2]; - /* Index of the last enqueued request */ - unsigned lstenq; - /* Index of the last submitted request or -1 if the DMA is stopped */ - int req_running; -}; - -enum pl330_dmac_state { - UNINIT, - INIT, - DYING, -}; - -/* A DMAC */ -struct pl330_dmac { - spinlock_t lock; - /* Holds list of reqs with due callbacks */ - struct list_head req_done; - /* Pointer to platform specific stuff */ - struct pl330_info *pinfo; - /* Maximum possible events/irqs */ - int events[32]; - /* BUS address of MicroCode buffer */ - u32 mcode_bus; - /* CPU address of MicroCode buffer */ - void *mcode_cpu; - /* List of all Channel threads */ - struct pl330_thread *channels; - /* Pointer to the MANAGER thread */ - struct pl330_thread *manager; - /* To handle bad news in interrupt */ - struct tasklet_struct tasks; - struct _pl330_tbd dmac_tbd; - /* State of DMAC operation */ - enum pl330_dmac_state state; -}; - -static inline void _callback(struct pl330_req *r, enum pl330_op_err err) -{ - if (r && r->xfer_cb) - r->xfer_cb(r->token, err); -} - -static inline bool _queue_empty(struct pl330_thread *thrd) -{ - return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) - ? true : false; -} - -static inline bool _queue_full(struct pl330_thread *thrd) -{ - return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) - ? false : true; -} - -static inline bool is_manager(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - - /* MANAGER is indexed at the end */ - if (thrd->id == pl330->pinfo->pcfg.num_chan) - return true; - else - return false; -} - -/* If manager of the thread is in Non-Secure mode */ -static inline bool _manager_ns(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - - return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; -} - -static inline u32 get_id(struct pl330_info *pi, u32 off) -{ - void __iomem *regs = pi->base; - u32 id = 0; - - id |= (readb(regs + off + 0x0) << 0); - id |= (readb(regs + off + 0x4) << 8); - id |= (readb(regs + off + 0x8) << 16); - id |= (readb(regs + off + 0xc) << 24); - - return id; -} - -static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], - enum pl330_dst da, u16 val) -{ - if (dry_run) - return SZ_DMAADDH; - - buf[0] = CMD_DMAADDH; - buf[0] |= (da << 1); - *((u16 *)&buf[1]) = val; - - PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", - da == 1 ? "DA" : "SA", val); - - return SZ_DMAADDH; -} - -static inline u32 _emit_END(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAEND; - - buf[0] = CMD_DMAEND; - - PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); - - return SZ_DMAEND; -} - -static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) -{ - if (dry_run) - return SZ_DMAFLUSHP; - - buf[0] = CMD_DMAFLUSHP; - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); - - return SZ_DMAFLUSHP; -} - -static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) -{ - if (dry_run) - return SZ_DMALD; - - buf[0] = CMD_DMALD; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); - - return SZ_DMALD; -} - -static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMALDP; - - buf[0] = CMD_DMALDP; - - if (cond == BURST) - buf[0] |= (1 << 1); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", - cond == SINGLE ? 'S' : 'B', peri >> 3); - - return SZ_DMALDP; -} - -static inline u32 _emit_LP(unsigned dry_run, u8 buf[], - unsigned loop, u8 cnt) -{ - if (dry_run) - return SZ_DMALP; - - buf[0] = CMD_DMALP; - - if (loop) - buf[0] |= (1 << 1); - - cnt--; /* DMAC increments by 1 internally */ - buf[1] = cnt; - - PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); - - return SZ_DMALP; -} - -struct _arg_LPEND { - enum pl330_cond cond; - bool forever; - unsigned loop; - u8 bjump; -}; - -static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], - const struct _arg_LPEND *arg) -{ - enum pl330_cond cond = arg->cond; - bool forever = arg->forever; - unsigned loop = arg->loop; - u8 bjump = arg->bjump; - - if (dry_run) - return SZ_DMALPEND; - - buf[0] = CMD_DMALPEND; - - if (loop) - buf[0] |= (1 << 2); - - if (!forever) - buf[0] |= (1 << 4); - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - buf[1] = bjump; - - PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", - forever ? "FE" : "END", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), - loop ? '1' : '0', - bjump); - - return SZ_DMALPEND; -} - -static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAKILL; - - buf[0] = CMD_DMAKILL; - - return SZ_DMAKILL; -} - -static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], - enum dmamov_dst dst, u32 val) -{ - if (dry_run) - return SZ_DMAMOV; - - buf[0] = CMD_DMAMOV; - buf[1] = dst; - *((u32 *)&buf[2]) = val; - - PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", - dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); - - return SZ_DMAMOV; -} - -static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMANOP; - - buf[0] = CMD_DMANOP; - - PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); - - return SZ_DMANOP; -} - -static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMARMB; - - buf[0] = CMD_DMARMB; - - PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); - - return SZ_DMARMB; -} - -static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) -{ - if (dry_run) - return SZ_DMASEV; - - buf[0] = CMD_DMASEV; - - ev &= 0x1f; - ev <<= 3; - buf[1] = ev; - - PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); - - return SZ_DMASEV; -} - -static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) -{ - if (dry_run) - return SZ_DMAST; - - buf[0] = CMD_DMAST; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (1 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (1 << 0); - - PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); - - return SZ_DMAST; -} - -static inline u32 _emit_STP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMASTP; - - buf[0] = CMD_DMASTP; - - if (cond == BURST) - buf[0] |= (1 << 1); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", - cond == SINGLE ? 'S' : 'B', peri >> 3); - - return SZ_DMASTP; -} - -static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMASTZ; - - buf[0] = CMD_DMASTZ; - - PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); - - return SZ_DMASTZ; -} - -static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, - unsigned invalidate) -{ - if (dry_run) - return SZ_DMAWFE; - - buf[0] = CMD_DMAWFE; - - ev &= 0x1f; - ev <<= 3; - buf[1] = ev; - - if (invalidate) - buf[1] |= (1 << 1); - - PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", - ev >> 3, invalidate ? ", I" : ""); - - return SZ_DMAWFE; -} - -static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], - enum pl330_cond cond, u8 peri) -{ - if (dry_run) - return SZ_DMAWFP; - - buf[0] = CMD_DMAWFP; - - if (cond == SINGLE) - buf[0] |= (0 << 1) | (0 << 0); - else if (cond == BURST) - buf[0] |= (1 << 1) | (0 << 0); - else - buf[0] |= (0 << 1) | (1 << 0); - - peri &= 0x1f; - peri <<= 3; - buf[1] = peri; - - PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", - cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); - - return SZ_DMAWFP; -} - -static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) -{ - if (dry_run) - return SZ_DMAWMB; - - buf[0] = CMD_DMAWMB; - - PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); - - return SZ_DMAWMB; -} - -struct _arg_GO { - u8 chan; - u32 addr; - unsigned ns; -}; - -static inline u32 _emit_GO(unsigned dry_run, u8 buf[], - const struct _arg_GO *arg) -{ - u8 chan = arg->chan; - u32 addr = arg->addr; - unsigned ns = arg->ns; - - if (dry_run) - return SZ_DMAGO; - - buf[0] = CMD_DMAGO; - buf[0] |= (ns << 1); - - buf[1] = chan & 0x7; - - *((u32 *)&buf[2]) = addr; - - return SZ_DMAGO; -} - -#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) - -/* Returns Time-Out */ -static bool _until_dmac_idle(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - unsigned long loops = msecs_to_loops(5); - - do { - /* Until Manager is Idle */ - if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) - break; - - cpu_relax(); - } while (--loops); - - if (!loops) - return true; - - return false; -} - -static inline void _execute_DBGINSN(struct pl330_thread *thrd, - u8 insn[], bool as_manager) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 val; - - val = (insn[0] << 16) | (insn[1] << 24); - if (!as_manager) { - val |= (1 << 0); - val |= (thrd->id << 8); /* Channel Number */ - } - writel(val, regs + DBGINST0); - - val = *((u32 *)&insn[2]); - writel(val, regs + DBGINST1); - - /* If timed out due to halted state-machine */ - if (_until_dmac_idle(thrd)) { - dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); - return; - } - - /* Get going */ - writel(0, regs + DBGCMD); -} - -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -static void mark_free(struct pl330_thread *thrd, int idx) -{ - struct _pl330_req *req = &thrd->req[idx]; - - _emit_END(0, req->mc_cpu); - req->mc_len = 0; - - thrd->req_running = -1; -} - -static inline u32 _state(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u32 val; - - if (is_manager(thrd)) - val = readl(regs + DS) & 0xf; - else - val = readl(regs + CS(thrd->id)) & 0xf; - - switch (val) { - case DS_ST_STOP: - return PL330_STATE_STOPPED; - case DS_ST_EXEC: - return PL330_STATE_EXECUTING; - case DS_ST_CMISS: - return PL330_STATE_CACHEMISS; - case DS_ST_UPDTPC: - return PL330_STATE_UPDTPC; - case DS_ST_WFE: - return PL330_STATE_WFE; - case DS_ST_FAULT: - return PL330_STATE_FAULTING; - case DS_ST_ATBRR: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_ATBARRIER; - case DS_ST_QBUSY: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_QUEUEBUSY; - case DS_ST_WFP: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_WFP; - case DS_ST_KILL: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_KILLING; - case DS_ST_CMPLT: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_COMPLETING; - case DS_ST_FLTCMP: - if (is_manager(thrd)) - return PL330_STATE_INVALID; - else - return PL330_STATE_FAULT_COMPLETING; - default: - return PL330_STATE_INVALID; - } -} - -static void _stop(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - u8 insn[6] = {0, 0, 0, 0, 0, 0}; - - if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) - UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); - - /* Return if nothing needs to be done */ - if (_state(thrd) == PL330_STATE_COMPLETING - || _state(thrd) == PL330_STATE_KILLING - || _state(thrd) == PL330_STATE_STOPPED) - return; - - _emit_KILL(0, insn); - - /* Stop generating interrupts for SEV */ - writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); - - _execute_DBGINSN(thrd, insn, is_manager(thrd)); -} - -/* Start doing req 'idx' of thread 'thrd' */ -static bool _trigger(struct pl330_thread *thrd) -{ - void __iomem *regs = thrd->dmac->pinfo->base; - struct _pl330_req *req; - struct pl330_req *r; - struct _arg_GO go; - unsigned ns; - u8 insn[6] = {0, 0, 0, 0, 0, 0}; - int idx; - - /* Return if already ACTIVE */ - if (_state(thrd) != PL330_STATE_STOPPED) - return true; - - idx = 1 - thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) - req = &thrd->req[idx]; - else { - idx = thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) - req = &thrd->req[idx]; - else - req = NULL; - } - - /* Return if no request */ - if (!req || !req->r) - return true; - - r = req->r; - - if (r->cfg) - ns = r->cfg->nonsecure ? 1 : 0; - else if (readl(regs + CS(thrd->id)) & CS_CNS) - ns = 1; - else - ns = 0; - - /* See 'Abort Sources' point-4 at Page 2-25 */ - if (_manager_ns(thrd) && !ns) - dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", - __func__, __LINE__); - - go.chan = thrd->id; - go.addr = req->mc_bus; - go.ns = ns; - _emit_GO(0, insn, &go); - - /* Set to generate interrupts for SEV */ - writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); - - /* Only manager can execute GO */ - _execute_DBGINSN(thrd, insn, true); - - thrd->req_running = idx; - - return true; -} - -static bool _start(struct pl330_thread *thrd) -{ - switch (_state(thrd)) { - case PL330_STATE_FAULT_COMPLETING: - UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); - - if (_state(thrd) == PL330_STATE_KILLING) - UNTIL(thrd, PL330_STATE_STOPPED) - - case PL330_STATE_FAULTING: - _stop(thrd); - - case PL330_STATE_KILLING: - case PL330_STATE_COMPLETING: - UNTIL(thrd, PL330_STATE_STOPPED) - - case PL330_STATE_STOPPED: - return _trigger(thrd); - - case PL330_STATE_WFP: - case PL330_STATE_QUEUEBUSY: - case PL330_STATE_ATBARRIER: - case PL330_STATE_UPDTPC: - case PL330_STATE_CACHEMISS: - case PL330_STATE_EXECUTING: - return true; - - case PL330_STATE_WFE: /* For RESUME, nothing yet */ - default: - return false; - } -} - -static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_RMB(dry_run, &buf[off]); - off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_WMB(dry_run, &buf[off]); - } - - return off; -} - -static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); - } - - return off; -} - -static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); - } - - return off; -} - -static int _bursts(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs, int cyc) -{ - int off = 0; - - switch (pxs->r->rqtype) { - case MEMTODEV: - off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); - break; - case DEVTOMEM: - off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); - break; - case MEMTOMEM: - off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); - break; - default: - off += 0x40000000; /* Scare off the Client */ - break; - } - - return off; -} - -/* Returns bytes consumed and updates bursts */ -static inline int _loop(unsigned dry_run, u8 buf[], - unsigned long *bursts, const struct _xfer_spec *pxs) -{ - int cyc, cycmax, szlp, szlpend, szbrst, off; - unsigned lcnt0, lcnt1, ljmp0, ljmp1; - struct _arg_LPEND lpend; - - /* Max iterations possible in DMALP is 256 */ - if (*bursts >= 256*256) { - lcnt1 = 256; - lcnt0 = 256; - cyc = *bursts / lcnt1 / lcnt0; - } else if (*bursts > 256) { - lcnt1 = 256; - lcnt0 = *bursts / lcnt1; - cyc = 1; - } else { - lcnt1 = *bursts; - lcnt0 = 0; - cyc = 1; - } - - szlp = _emit_LP(1, buf, 0, 0); - szbrst = _bursts(1, buf, pxs, 1); - - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 0; - lpend.bjump = 0; - szlpend = _emit_LPEND(1, buf, &lpend); - - if (lcnt0) { - szlp *= 2; - szlpend *= 2; - } - - /* - * Max bursts that we can unroll due to limit on the - * size of backward jump that can be encoded in DMALPEND - * which is 8-bits and hence 255 - */ - cycmax = (255 - (szlp + szlpend)) / szbrst; - - cyc = (cycmax < cyc) ? cycmax : cyc; - - off = 0; - - if (lcnt0) { - off += _emit_LP(dry_run, &buf[off], 0, lcnt0); - ljmp0 = off; - } - - off += _emit_LP(dry_run, &buf[off], 1, lcnt1); - ljmp1 = off; - - off += _bursts(dry_run, &buf[off], pxs, cyc); - - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 1; - lpend.bjump = off - ljmp1; - off += _emit_LPEND(dry_run, &buf[off], &lpend); - - if (lcnt0) { - lpend.cond = ALWAYS; - lpend.forever = false; - lpend.loop = 0; - lpend.bjump = off - ljmp0; - off += _emit_LPEND(dry_run, &buf[off], &lpend); - } - - *bursts = lcnt1 * cyc; - if (lcnt0) - *bursts *= lcnt0; - - return off; -} - -static inline int _setup_loops(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs) -{ - struct pl330_xfer *x = pxs->x; - u32 ccr = pxs->ccr; - unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); - int off = 0; - - while (bursts) { - c = bursts; - off += _loop(dry_run, &buf[off], &c, pxs); - bursts -= c; - } - - return off; -} - -static inline int _setup_xfer(unsigned dry_run, u8 buf[], - const struct _xfer_spec *pxs) -{ - struct pl330_xfer *x = pxs->x; - int off = 0; - - /* DMAMOV SAR, x->src_addr */ - off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); - /* DMAMOV DAR, x->dst_addr */ - off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); - - /* Setup Loop(s) */ - off += _setup_loops(dry_run, &buf[off], pxs); - - return off; -} - -/* - * A req is a sequence of one or more xfer units. - * Returns the number of bytes taken to setup the MC for the req. - */ -static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, - unsigned index, struct _xfer_spec *pxs) -{ - struct _pl330_req *req = &thrd->req[index]; - struct pl330_xfer *x; - u8 *buf = req->mc_cpu; - int off = 0; - - PL330_DBGMC_START(req->mc_bus); - - /* DMAMOV CCR, ccr */ - off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); - - x = pxs->r->x; - do { - /* Error if xfer length is not aligned at burst size */ - if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) - return -EINVAL; - - pxs->x = x; - off += _setup_xfer(dry_run, &buf[off], pxs); - - x = x->next; - } while (x); - - /* DMASEV peripheral/event */ - off += _emit_SEV(dry_run, &buf[off], thrd->ev); - /* DMAEND */ - off += _emit_END(dry_run, &buf[off]); - - return off; -} - -static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) -{ - u32 ccr = 0; - - if (rqc->src_inc) - ccr |= CC_SRCINC; - - if (rqc->dst_inc) - ccr |= CC_DSTINC; - - /* We set same protection levels for Src and DST for now */ - if (rqc->privileged) - ccr |= CC_SRCPRI | CC_DSTPRI; - if (rqc->nonsecure) - ccr |= CC_SRCNS | CC_DSTNS; - if (rqc->insnaccess) - ccr |= CC_SRCIA | CC_DSTIA; - - ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); - ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); - - ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); - ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); - - ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); - ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); - - ccr |= (rqc->swap << CC_SWAP_SHFT); - - return ccr; -} - -static inline bool _is_valid(u32 ccr) -{ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - - dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; - scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; - - if (dcctl == DINVALID1 || dcctl == DINVALID2 - || scctl == SINVALID1 || scctl == SINVALID2) - return false; - else - return true; -} - -/* - * Submit a list of xfers after which the client wants notification. - * Client is not notified after each xfer unit, just once after all - * xfer units are done or some error occurs. - */ -int pl330_submit_req(void *ch_id, struct pl330_req *r) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; - struct _xfer_spec xs; - unsigned long flags; - void __iomem *regs; - unsigned idx; - u32 ccr; - int ret = 0; - - /* No Req or Unacquired Channel or DMAC */ - if (!r || !thrd || thrd->free) - return -EINVAL; - - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; - - if (pl330->state == DYING - || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { - dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", - __func__, __LINE__); - return -EAGAIN; - } - - /* If request for non-existing peripheral */ - if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Invalid peripheral(%u)!\n", - __func__, __LINE__, r->peri); - return -EINVAL; - } - - spin_lock_irqsave(&pl330->lock, flags); - - if (_queue_full(thrd)) { - ret = -EAGAIN; - goto xfer_exit; - } - - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; - - /* Use last settings, if not provided */ - if (r->cfg) - ccr = _prepare_ccr(r->cfg); - else - ccr = readl(regs + CC(thrd->id)); - - /* If this req doesn't have valid xfer settings */ - if (!_is_valid(ccr)) { - ret = -EINVAL; - dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", - __func__, __LINE__, ccr); - goto xfer_exit; - } - - idx = IS_FREE(&thrd->req[0]) ? 0 : 1; - - xs.ccr = ccr; - xs.r = r; - - /* First dry run to check if req is acceptable */ - ret = _setup_req(1, thrd, idx, &xs); - if (ret < 0) - goto xfer_exit; - - if (ret > pi->mcbufsz / 2) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Trying increasing mcbufsz\n", - __func__, __LINE__); - ret = -ENOMEM; - goto xfer_exit; - } - - /* Hook the request */ - thrd->lstenq = idx; - thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); - thrd->req[idx].r = r; - - ret = 0; - -xfer_exit: - spin_unlock_irqrestore(&pl330->lock, flags); - - return ret; -} -EXPORT_SYMBOL(pl330_submit_req); - -static void pl330_dotask(unsigned long data) -{ - struct pl330_dmac *pl330 = (struct pl330_dmac *) data; - struct pl330_info *pi = pl330->pinfo; - unsigned long flags; - int i; - - spin_lock_irqsave(&pl330->lock, flags); - - /* The DMAC itself gone nuts */ - if (pl330->dmac_tbd.reset_dmac) { - pl330->state = DYING; - /* Reset the manager too */ - pl330->dmac_tbd.reset_mngr = true; - /* Clear the reset flag */ - pl330->dmac_tbd.reset_dmac = false; - } - - if (pl330->dmac_tbd.reset_mngr) { - _stop(pl330->manager); - /* Reset all channels */ - pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; - /* Clear the reset flag */ - pl330->dmac_tbd.reset_mngr = false; - } - - for (i = 0; i < pi->pcfg.num_chan; i++) { - - if (pl330->dmac_tbd.reset_chan & (1 << i)) { - struct pl330_thread *thrd = &pl330->channels[i]; - void __iomem *regs = pi->base; - enum pl330_op_err err; - - _stop(thrd); - - if (readl(regs + FSC) & (1 << thrd->id)) - err = PL330_ERR_FAIL; - else - err = PL330_ERR_ABORT; - - spin_unlock_irqrestore(&pl330->lock, flags); - - _callback(thrd->req[1 - thrd->lstenq].r, err); - _callback(thrd->req[thrd->lstenq].r, err); - - spin_lock_irqsave(&pl330->lock, flags); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - - /* Clear the reset flag */ - pl330->dmac_tbd.reset_chan &= ~(1 << i); - } - } - - spin_unlock_irqrestore(&pl330->lock, flags); - - return; -} - -/* Returns 1 if state was updated, 0 otherwise */ -int pl330_update(const struct pl330_info *pi) -{ - struct _pl330_req *rqdone; - struct pl330_dmac *pl330; - unsigned long flags; - void __iomem *regs; - u32 val; - int id, ev, ret = 0; - - if (!pi || !pi->pl330_data) - return 0; - - regs = pi->base; - pl330 = pi->pl330_data; - - spin_lock_irqsave(&pl330->lock, flags); - - val = readl(regs + FSM) & 0x1; - if (val) - pl330->dmac_tbd.reset_mngr = true; - else - pl330->dmac_tbd.reset_mngr = false; - - val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); - pl330->dmac_tbd.reset_chan |= val; - if (val) { - int i = 0; - while (i < pi->pcfg.num_chan) { - if (val & (1 << i)) { - dev_info(pi->dev, - "Reset Channel-%d\t CS-%x FTC-%x\n", - i, readl(regs + CS(i)), - readl(regs + FTC(i))); - _stop(&pl330->channels[i]); - } - i++; - } - } - - /* Check which event happened i.e, thread notified */ - val = readl(regs + ES); - if (pi->pcfg.num_events < 32 - && val & ~((1 << pi->pcfg.num_events) - 1)) { - pl330->dmac_tbd.reset_dmac = true; - dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); - ret = 1; - goto updt_exit; - } - - for (ev = 0; ev < pi->pcfg.num_events; ev++) { - if (val & (1 << ev)) { /* Event occurred */ - struct pl330_thread *thrd; - u32 inten = readl(regs + INTEN); - int active; - - /* Clear the event */ - if (inten & (1 << ev)) - writel(1 << ev, regs + INTCLR); - - ret = 1; - - id = pl330->events[ev]; - - thrd = &pl330->channels[id]; - - active = thrd->req_running; - if (active == -1) /* Aborted */ - continue; - - rqdone = &thrd->req[active]; - mark_free(thrd, active); - - /* Get going again ASAP */ - _start(thrd); - - /* For now, just make a list of callbacks to be done */ - list_add_tail(&rqdone->rqd, &pl330->req_done); - } - } - - /* Now that we are in no hurry, do the callbacks */ - while (!list_empty(&pl330->req_done)) { - struct pl330_req *r; - - rqdone = container_of(pl330->req_done.next, - struct _pl330_req, rqd); - - list_del_init(&rqdone->rqd); - - /* Detach the req */ - r = rqdone->r; - rqdone->r = NULL; - - spin_unlock_irqrestore(&pl330->lock, flags); - _callback(r, PL330_ERR_NONE); - spin_lock_irqsave(&pl330->lock, flags); - } - -updt_exit: - spin_unlock_irqrestore(&pl330->lock, flags); - - if (pl330->dmac_tbd.reset_dmac - || pl330->dmac_tbd.reset_mngr - || pl330->dmac_tbd.reset_chan) { - ret = 1; - tasklet_schedule(&pl330->tasks); - } - - return ret; -} -EXPORT_SYMBOL(pl330_update); - -int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - int ret = 0, active = thrd->req_running; - - if (!thrd || thrd->free || thrd->dmac->state == DYING) - return -EINVAL; - - pl330 = thrd->dmac; - - spin_lock_irqsave(&pl330->lock, flags); - - switch (op) { - case PL330_OP_FLUSH: - /* Make sure the channel is stopped */ - _stop(thrd); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - break; - - case PL330_OP_ABORT: - /* Make sure the channel is stopped */ - _stop(thrd); - - /* ABORT is only for the active req */ - if (active == -1) - break; - - thrd->req[active].r = NULL; - mark_free(thrd, active); - - /* Start the next */ - case PL330_OP_START: - if ((active == -1) && !_start(thrd)) - ret = -EIO; - break; - - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - return ret; -} -EXPORT_SYMBOL(pl330_chan_ctrl); - -int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; - void __iomem *regs; - int active; - u32 val; - - if (!pstatus || !thrd || thrd->free) - return -EINVAL; - - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; - - /* The client should remove the DMAC and add again */ - if (pl330->state == DYING) - pstatus->dmac_halted = true; - else - pstatus->dmac_halted = false; - - val = readl(regs + FSC); - if (val & (1 << thrd->id)) - pstatus->faulting = true; - else - pstatus->faulting = false; - - active = thrd->req_running; - - if (active == -1) { - /* Indicate that the thread is not running */ - pstatus->top_req = NULL; - pstatus->wait_req = NULL; - } else { - pstatus->top_req = thrd->req[active].r; - pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) - ? thrd->req[1 - active].r : NULL; - } - - pstatus->src_addr = readl(regs + SA(thrd->id)); - pstatus->dst_addr = readl(regs + DA(thrd->id)); - - return 0; -} -EXPORT_SYMBOL(pl330_chan_status); - -/* Reserve an event */ -static inline int _alloc_event(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - int ev; - - for (ev = 0; ev < pi->pcfg.num_events; ev++) - if (pl330->events[ev] == -1) { - pl330->events[ev] = thrd->id; - return ev; - } - - return -1; -} - -static bool _chan_ns(const struct pl330_info *pi, int i) -{ - return pi->pcfg.irq_ns & (1 << i); -} - -/* Upon success, returns IdentityToken for the - * allocated channel, NULL otherwise. - */ -void *pl330_request_channel(const struct pl330_info *pi) -{ - struct pl330_thread *thrd = NULL; - struct pl330_dmac *pl330; - unsigned long flags; - int chans, i; - - if (!pi || !pi->pl330_data) - return NULL; - - pl330 = pi->pl330_data; - - if (pl330->state == DYING) - return NULL; - - chans = pi->pcfg.num_chan; - - spin_lock_irqsave(&pl330->lock, flags); - - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - if ((thrd->free) && (!_manager_ns(thrd) || - _chan_ns(pi, i))) { - thrd->ev = _alloc_event(thrd); - if (thrd->ev >= 0) { - thrd->free = false; - thrd->lstenq = 1; - thrd->req[0].r = NULL; - mark_free(thrd, 0); - thrd->req[1].r = NULL; - mark_free(thrd, 1); - break; - } - } - thrd = NULL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - - return thrd; -} -EXPORT_SYMBOL(pl330_request_channel); - -/* Release an event */ -static inline void _free_event(struct pl330_thread *thrd, int ev) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - - /* If the event is valid and was held by the thread */ - if (ev >= 0 && ev < pi->pcfg.num_events - && pl330->events[ev] == thrd->id) - pl330->events[ev] = -1; -} - -void pl330_release_channel(void *ch_id) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - - if (!thrd || thrd->free) - return; - - _stop(thrd); - - _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); - _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); - - pl330 = thrd->dmac; - - spin_lock_irqsave(&pl330->lock, flags); - _free_event(thrd, thrd->ev); - thrd->free = true; - spin_unlock_irqrestore(&pl330->lock, flags); -} -EXPORT_SYMBOL(pl330_release_channel); - -/* Initialize the structure for PL330 configuration, that can be used - * by the client driver the make best use of the DMAC - */ -static void read_dmac_config(struct pl330_info *pi) -{ - void __iomem *regs = pi->base; - u32 val; - - val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; - val &= CRD_DATA_WIDTH_MASK; - pi->pcfg.data_bus_width = 8 * (1 << val); - - val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; - val &= CRD_DATA_BUFF_MASK; - pi->pcfg.data_buf_dep = val + 1; - - val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; - val &= CR0_NUM_CHANS_MASK; - val += 1; - pi->pcfg.num_chan = val; - - val = readl(regs + CR0); - if (val & CR0_PERIPH_REQ_SET) { - val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; - val += 1; - pi->pcfg.num_peri = val; - pi->pcfg.peri_ns = readl(regs + CR4); - } else { - pi->pcfg.num_peri = 0; - } - - val = readl(regs + CR0); - if (val & CR0_BOOT_MAN_NS) - pi->pcfg.mode |= DMAC_MODE_NS; - else - pi->pcfg.mode &= ~DMAC_MODE_NS; - - val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; - val &= CR0_NUM_EVENTS_MASK; - val += 1; - pi->pcfg.num_events = val; - - pi->pcfg.irq_ns = readl(regs + CR3); - - pi->pcfg.periph_id = get_id(pi, PERIPH_ID); - pi->pcfg.pcell_id = get_id(pi, PCELL_ID); -} - -static inline void _reset_thread(struct pl330_thread *thrd) -{ - struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; - - thrd->req[0].mc_cpu = pl330->mcode_cpu - + (thrd->id * pi->mcbufsz); - thrd->req[0].mc_bus = pl330->mcode_bus - + (thrd->id * pi->mcbufsz); - thrd->req[0].r = NULL; - mark_free(thrd, 0); - - thrd->req[1].mc_cpu = thrd->req[0].mc_cpu - + pi->mcbufsz / 2; - thrd->req[1].mc_bus = thrd->req[0].mc_bus - + pi->mcbufsz / 2; - thrd->req[1].r = NULL; - mark_free(thrd, 1); -} - -static int dmac_alloc_threads(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - struct pl330_thread *thrd; - int i; - - /* Allocate 1 Manager and 'chans' Channel threads */ - pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), - GFP_KERNEL); - if (!pl330->channels) - return -ENOMEM; - - /* Init Channel threads */ - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - thrd->id = i; - thrd->dmac = pl330; - _reset_thread(thrd); - thrd->free = true; - } - - /* MANAGER is indexed at the end */ - thrd = &pl330->channels[chans]; - thrd->id = chans; - thrd->dmac = pl330; - thrd->free = false; - pl330->manager = thrd; - - return 0; -} - -static int dmac_alloc_resources(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - int ret; - - /* - * Alloc MicroCode buffer for 'chans' Channel threads. - * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) - */ - pl330->mcode_cpu = dma_alloc_coherent(pi->dev, - chans * pi->mcbufsz, - &pl330->mcode_bus, GFP_KERNEL); - if (!pl330->mcode_cpu) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - ret = dmac_alloc_threads(pl330); - if (ret) { - dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", - __func__, __LINE__); - dma_free_coherent(pi->dev, - chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); - return ret; - } - - return 0; -} - -int pl330_add(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - void __iomem *regs; - int i, ret; - - if (!pi || !pi->dev) - return -EINVAL; - - /* If already added */ - if (pi->pl330_data) - return -EINVAL; - - /* - * If the SoC can perform reset on the DMAC, then do it - * before reading its configuration. - */ - if (pi->dmac_reset) - pi->dmac_reset(pi); - - regs = pi->base; - - /* Check if we can handle this DMAC */ - if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL - || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { - dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", - get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); - return -EINVAL; - } - - /* Read the configuration of the DMAC */ - read_dmac_config(pi); - - if (pi->pcfg.num_events == 0) { - dev_err(pi->dev, "%s:%d Can't work without events!\n", - __func__, __LINE__); - return -EINVAL; - } - - pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); - if (!pl330) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - /* Assign the info structure and private data */ - pl330->pinfo = pi; - pi->pl330_data = pl330; - - spin_lock_init(&pl330->lock); - - INIT_LIST_HEAD(&pl330->req_done); - - /* Use default MC buffer size if not provided */ - if (!pi->mcbufsz) - pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; - - /* Mark all events as free */ - for (i = 0; i < pi->pcfg.num_events; i++) - pl330->events[i] = -1; - - /* Allocate resources needed by the DMAC */ - ret = dmac_alloc_resources(pl330); - if (ret) { - dev_err(pi->dev, "Unable to create channels for DMAC\n"); - kfree(pl330); - return ret; - } - - tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); - - pl330->state = INIT; - - return 0; -} -EXPORT_SYMBOL(pl330_add); - -static int dmac_free_threads(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - struct pl330_thread *thrd; - int i; - - /* Release Channel threads */ - for (i = 0; i < chans; i++) { - thrd = &pl330->channels[i]; - pl330_release_channel((void *)thrd); - } - - /* Free memory */ - kfree(pl330->channels); - - return 0; -} - -static void dmac_free_resources(struct pl330_dmac *pl330) -{ - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - - dmac_free_threads(pl330); - - dma_free_coherent(pi->dev, chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); -} - -void pl330_del(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - - if (!pi || !pi->pl330_data) - return; - - pl330 = pi->pl330_data; - - pl330->state = UNINIT; - - tasklet_kill(&pl330->tasks); - - /* Free DMAC resources */ - dmac_free_resources(pl330); - - kfree(pl330); - pi->pl330_data = NULL; -} -EXPORT_SYMBOL(pl330_del); diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h deleted file mode 100644 index 575fa8186ca..00000000000 --- a/arch/arm/include/asm/hardware/pl330.h +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/include/asm/hardware/pl330.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PL330_CORE_H -#define __PL330_CORE_H - -#define PL330_MAX_CHAN 8 -#define PL330_MAX_IRQS 32 -#define PL330_MAX_PERI 32 - -enum pl330_srccachectrl { - SCCTRL0 = 0, /* Noncacheable and nonbufferable */ - SCCTRL1, /* Bufferable only */ - SCCTRL2, /* Cacheable, but do not allocate */ - SCCTRL3, /* Cacheable and bufferable, but do not allocate */ - SINVALID1, - SINVALID2, - SCCTRL6, /* Cacheable write-through, allocate on reads only */ - SCCTRL7, /* Cacheable write-back, allocate on reads only */ -}; - -enum pl330_dstcachectrl { - DCCTRL0 = 0, /* Noncacheable and nonbufferable */ - DCCTRL1, /* Bufferable only */ - DCCTRL2, /* Cacheable, but do not allocate */ - DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1 = 8, - DINVALID2, - DCCTRL6, /* Cacheable write-through, allocate on writes only */ - DCCTRL7, /* Cacheable write-back, allocate on writes only */ -}; - -/* Populated by the PL330 core driver for DMA API driver's info */ -struct pl330_config { - u32 periph_id; - u32 pcell_id; -#define DMAC_MODE_NS (1 << 0) - unsigned int mode; - unsigned int data_bus_width:10; /* In number of bits */ - unsigned int data_buf_dep:10; - unsigned int num_chan:4; - unsigned int num_peri:6; - u32 peri_ns; - unsigned int num_events:6; - u32 irq_ns; -}; - -/* Handle to the DMAC provided to the PL330 core */ -struct pl330_info { - /* Owning device */ - struct device *dev; - /* Size of MicroCode buffers for each channel. */ - unsigned mcbufsz; - /* ioremap'ed address of PL330 registers. */ - void __iomem *base; - /* Client can freely use it. */ - void *client_data; - /* PL330 core data, Client must not touch it. */ - void *pl330_data; - /* Populated by the PL330 core driver during pl330_add */ - struct pl330_config pcfg; - /* - * If the DMAC has some reset mechanism, then the - * client may want to provide pointer to the method. - */ - void (*dmac_reset)(struct pl330_info *pi); -}; - -enum pl330_byteswap { - SWAP_NO = 0, - SWAP_2, - SWAP_4, - SWAP_8, - SWAP_16, -}; - -/** - * Request Configuration. - * The PL330 core does not modify this and uses the last - * working configuration if the request doesn't provide any. - * - * The Client may want to provide this info only for the - * first request and a request with new settings. - */ -struct pl330_reqcfg { - /* Address Incrementing */ - unsigned dst_inc:1; - unsigned src_inc:1; - - /* - * For now, the SRC & DST protection levels - * and burst size/length are assumed same. - */ - bool nonsecure; - bool privileged; - bool insnaccess; - unsigned brst_len:5; - unsigned brst_size:3; /* in power of 2 */ - - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - enum pl330_byteswap swap; -}; - -/* - * One cycle of DMAC operation. - * There may be more than one xfer in a request. - */ -struct pl330_xfer { - u32 src_addr; - u32 dst_addr; - /* Size to xfer */ - u32 bytes; - /* - * Pointer to next xfer in the list. - * The last xfer in the req must point to NULL. - */ - struct pl330_xfer *next; -}; - -/* The xfer callbacks are made with one of these arguments. */ -enum pl330_op_err { - /* The all xfers in the request were success. */ - PL330_ERR_NONE, - /* If req aborted due to global error. */ - PL330_ERR_ABORT, - /* If req failed due to problem with Channel. */ - PL330_ERR_FAIL, -}; - -enum pl330_reqtype { - MEMTOMEM, - MEMTODEV, - DEVTOMEM, - DEVTODEV, -}; - -/* A request defining Scatter-Gather List ending with NULL xfer. */ -struct pl330_req { - enum pl330_reqtype rqtype; - /* Index of peripheral for the xfer. */ - unsigned peri:5; - /* Unique token for this xfer, set by the client. */ - void *token; - /* Callback to be called after xfer. */ - void (*xfer_cb)(void *token, enum pl330_op_err err); - /* If NULL, req will be done at last set parameters. */ - struct pl330_reqcfg *cfg; - /* Pointer to first xfer in the request. */ - struct pl330_xfer *x; -}; - -/* - * To know the status of the channel and DMAC, the client - * provides a pointer to this structure. The PL330 core - * fills it with current information. - */ -struct pl330_chanstatus { - /* - * If the DMAC engine halted due to some error, - * the client should remove-add DMAC. - */ - bool dmac_halted; - /* - * If channel is halted due to some error, - * the client should ABORT/FLUSH and START the channel. - */ - bool faulting; - /* Location of last load */ - u32 src_addr; - /* Location of last store */ - u32 dst_addr; - /* - * Pointer to the currently active req, NULL if channel is - * inactive, even though the requests may be present. - */ - struct pl330_req *top_req; - /* Pointer to req waiting second in the queue if any. */ - struct pl330_req *wait_req; -}; - -enum pl330_chan_op { - /* Start the channel */ - PL330_OP_START, - /* Abort the active xfer */ - PL330_OP_ABORT, - /* Stop xfer and flush queue */ - PL330_OP_FLUSH, -}; - -extern int pl330_add(struct pl330_info *); -extern void pl330_del(struct pl330_info *pi); -extern int pl330_update(const struct pl330_info *pi); -extern void pl330_release_channel(void *ch_id); -extern void *pl330_request_channel(const struct pl330_info *pi); -extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); -extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); -extern int pl330_submit_req(void *ch_id, struct pl330_req *r); - -#endif /* __PL330_CORE_H */ diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index f1a274994bb..65c61dba66d 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -201,7 +201,6 @@ config PL330_DMA tristate "DMA API Driver for PL330" select DMA_ENGINE depends on ARM_AMBA - select PL330 help Select if your platform has one or more PL330 DMACs. You need to provide platform specific settings via diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 84ebea9bc53..2e351f40fc4 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -1,4 +1,6 @@ -/* linux/drivers/dma/pl330.c +/* + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh @@ -9,10 +11,15 @@ * (at your option) any later version. */ +#include #include #include #include #include +#include +#include +#include +#include #include #include #include @@ -21,8 +28,489 @@ #include #include +#define PL330_MAX_CHAN 8 +#define PL330_MAX_IRQS 32 +#define PL330_MAX_PERI 32 + +enum pl330_srccachectrl { + SCCTRL0, /* Noncacheable and nonbufferable */ + SCCTRL1, /* Bufferable only */ + SCCTRL2, /* Cacheable, but do not allocate */ + SCCTRL3, /* Cacheable and bufferable, but do not allocate */ + SINVALID1, + SINVALID2, + SCCTRL6, /* Cacheable write-through, allocate on reads only */ + SCCTRL7, /* Cacheable write-back, allocate on reads only */ +}; + +enum pl330_dstcachectrl { + DCCTRL0, /* Noncacheable and nonbufferable */ + DCCTRL1, /* Bufferable only */ + DCCTRL2, /* Cacheable, but do not allocate */ + DCCTRL3, /* Cacheable and bufferable, but do not allocate */ + DINVALID1 = 8, + DINVALID2, + DCCTRL6, /* Cacheable write-through, allocate on writes only */ + DCCTRL7, /* Cacheable write-back, allocate on writes only */ +}; + +enum pl330_byteswap { + SWAP_NO, + SWAP_2, + SWAP_4, + SWAP_8, + SWAP_16, +}; + +enum pl330_reqtype { + MEMTOMEM, + MEMTODEV, + DEVTOMEM, + DEVTODEV, +}; + +/* Register and Bit field Definitions */ +#define DS 0x0 +#define DS_ST_STOP 0x0 +#define DS_ST_EXEC 0x1 +#define DS_ST_CMISS 0x2 +#define DS_ST_UPDTPC 0x3 +#define DS_ST_WFE 0x4 +#define DS_ST_ATBRR 0x5 +#define DS_ST_QBUSY 0x6 +#define DS_ST_WFP 0x7 +#define DS_ST_KILL 0x8 +#define DS_ST_CMPLT 0x9 +#define DS_ST_FLTCMP 0xe +#define DS_ST_FAULT 0xf + +#define DPC 0x4 +#define INTEN 0x20 +#define ES 0x24 +#define INTSTATUS 0x28 +#define INTCLR 0x2c +#define FSM 0x30 +#define FSC 0x34 +#define FTM 0x38 + +#define _FTC 0x40 +#define FTC(n) (_FTC + (n)*0x4) + +#define _CS 0x100 +#define CS(n) (_CS + (n)*0x8) +#define CS_CNS (1 << 21) + +#define _CPC 0x104 +#define CPC(n) (_CPC + (n)*0x8) + +#define _SA 0x400 +#define SA(n) (_SA + (n)*0x20) + +#define _DA 0x404 +#define DA(n) (_DA + (n)*0x20) + +#define _CC 0x408 +#define CC(n) (_CC + (n)*0x20) + +#define CC_SRCINC (1 << 0) +#define CC_DSTINC (1 << 14) +#define CC_SRCPRI (1 << 8) +#define CC_DSTPRI (1 << 22) +#define CC_SRCNS (1 << 9) +#define CC_DSTNS (1 << 23) +#define CC_SRCIA (1 << 10) +#define CC_DSTIA (1 << 24) +#define CC_SRCBRSTLEN_SHFT 4 +#define CC_DSTBRSTLEN_SHFT 18 +#define CC_SRCBRSTSIZE_SHFT 1 +#define CC_DSTBRSTSIZE_SHFT 15 +#define CC_SRCCCTRL_SHFT 11 +#define CC_SRCCCTRL_MASK 0x7 +#define CC_DSTCCTRL_SHFT 25 +#define CC_DRCCCTRL_MASK 0x7 +#define CC_SWAP_SHFT 28 + +#define _LC0 0x40c +#define LC0(n) (_LC0 + (n)*0x20) + +#define _LC1 0x410 +#define LC1(n) (_LC1 + (n)*0x20) + +#define DBGSTATUS 0xd00 +#define DBG_BUSY (1 << 0) + +#define DBGCMD 0xd04 +#define DBGINST0 0xd08 +#define DBGINST1 0xd0c + +#define CR0 0xe00 +#define CR1 0xe04 +#define CR2 0xe08 +#define CR3 0xe0c +#define CR4 0xe10 +#define CRD 0xe14 + +#define PERIPH_ID 0xfe0 +#define PCELL_ID 0xff0 + +#define CR0_PERIPH_REQ_SET (1 << 0) +#define CR0_BOOT_EN_SET (1 << 1) +#define CR0_BOOT_MAN_NS (1 << 2) +#define CR0_NUM_CHANS_SHIFT 4 +#define CR0_NUM_CHANS_MASK 0x7 +#define CR0_NUM_PERIPH_SHIFT 12 +#define CR0_NUM_PERIPH_MASK 0x1f +#define CR0_NUM_EVENTS_SHIFT 17 +#define CR0_NUM_EVENTS_MASK 0x1f + +#define CR1_ICACHE_LEN_SHIFT 0 +#define CR1_ICACHE_LEN_MASK 0x7 +#define CR1_NUM_ICACHELINES_SHIFT 4 +#define CR1_NUM_ICACHELINES_MASK 0xf + +#define CRD_DATA_WIDTH_SHIFT 0 +#define CRD_DATA_WIDTH_MASK 0x7 +#define CRD_WR_CAP_SHIFT 4 +#define CRD_WR_CAP_MASK 0x7 +#define CRD_WR_Q_DEP_SHIFT 8 +#define CRD_WR_Q_DEP_MASK 0xf +#define CRD_RD_CAP_SHIFT 12 +#define CRD_RD_CAP_MASK 0x7 +#define CRD_RD_Q_DEP_SHIFT 16 +#define CRD_RD_Q_DEP_MASK 0xf +#define CRD_DATA_BUFF_SHIFT 20 +#define CRD_DATA_BUFF_MASK 0x3ff + +#define PART 0x330 +#define DESIGNER 0x41 +#define REVISION 0x0 +#define INTEG_CFG 0x0 +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) + +#define PCELL_ID_VAL 0xb105f00d + +#define PL330_STATE_STOPPED (1 << 0) +#define PL330_STATE_EXECUTING (1 << 1) +#define PL330_STATE_WFE (1 << 2) +#define PL330_STATE_FAULTING (1 << 3) +#define PL330_STATE_COMPLETING (1 << 4) +#define PL330_STATE_WFP (1 << 5) +#define PL330_STATE_KILLING (1 << 6) +#define PL330_STATE_FAULT_COMPLETING (1 << 7) +#define PL330_STATE_CACHEMISS (1 << 8) +#define PL330_STATE_UPDTPC (1 << 9) +#define PL330_STATE_ATBARRIER (1 << 10) +#define PL330_STATE_QUEUEBUSY (1 << 11) +#define PL330_STATE_INVALID (1 << 15) + +#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \ + | PL330_STATE_WFE | PL330_STATE_FAULTING) + +#define CMD_DMAADDH 0x54 +#define CMD_DMAEND 0x00 +#define CMD_DMAFLUSHP 0x35 +#define CMD_DMAGO 0xa0 +#define CMD_DMALD 0x04 +#define CMD_DMALDP 0x25 +#define CMD_DMALP 0x20 +#define CMD_DMALPEND 0x28 +#define CMD_DMAKILL 0x01 +#define CMD_DMAMOV 0xbc +#define CMD_DMANOP 0x18 +#define CMD_DMARMB 0x12 +#define CMD_DMASEV 0x34 +#define CMD_DMAST 0x08 +#define CMD_DMASTP 0x29 +#define CMD_DMASTZ 0x0c +#define CMD_DMAWFE 0x36 +#define CMD_DMAWFP 0x30 +#define CMD_DMAWMB 0x13 + +#define SZ_DMAADDH 3 +#define SZ_DMAEND 1 +#define SZ_DMAFLUSHP 2 +#define SZ_DMALD 1 +#define SZ_DMALDP 2 +#define SZ_DMALP 2 +#define SZ_DMALPEND 2 +#define SZ_DMAKILL 1 +#define SZ_DMAMOV 6 +#define SZ_DMANOP 1 +#define SZ_DMARMB 1 +#define SZ_DMASEV 2 +#define SZ_DMAST 1 +#define SZ_DMASTP 2 +#define SZ_DMASTZ 1 +#define SZ_DMAWFE 2 +#define SZ_DMAWFP 2 +#define SZ_DMAWMB 1 +#define SZ_DMAGO 6 + +#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1) +#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7)) + +#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr)) +#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr)) + +/* + * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req + * at 1byte/burst for P<->M and M<->M respectively. + * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req + * should be enough for P<->M and M<->M respectively. + */ +#define MCODE_BUFF_PER_REQ 256 + +/* If the _pl330_req is available to the client */ +#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) + +/* Use this _only_ to wait on transient states */ +#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); + +#ifdef PL330_DEBUG_MCGEN +static unsigned cmd_line; +#define PL330_DBGCMD_DUMP(off, x...) do { \ + printk("%x:", cmd_line); \ + printk(x); \ + cmd_line += off; \ + } while (0) +#define PL330_DBGMC_START(addr) (cmd_line = addr) +#else +#define PL330_DBGCMD_DUMP(off, x...) do {} while (0) +#define PL330_DBGMC_START(addr) do {} while (0) +#endif + +/* The number of default descriptors */ #define NR_DEFAULT_DESC 16 +/* Populated by the PL330 core driver for DMA API driver's info */ +struct pl330_config { + u32 periph_id; + u32 pcell_id; +#define DMAC_MODE_NS (1 << 0) + unsigned int mode; + unsigned int data_bus_width:10; /* In number of bits */ + unsigned int data_buf_dep:10; + unsigned int num_chan:4; + unsigned int num_peri:6; + u32 peri_ns; + unsigned int num_events:6; + u32 irq_ns; +}; + +/* Handle to the DMAC provided to the PL330 core */ +struct pl330_info { + /* Owning device */ + struct device *dev; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Client can freely use it. */ + void *client_data; + /* PL330 core data, Client must not touch it. */ + void *pl330_data; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + /* + * If the DMAC has some reset mechanism, then the + * client may want to provide pointer to the method. + */ + void (*dmac_reset)(struct pl330_info *pi); +}; + +/** + * Request Configuration. + * The PL330 core does not modify this and uses the last + * working configuration if the request doesn't provide any. + * + * The Client may want to provide this info only for the + * first request and a request with new settings. + */ +struct pl330_reqcfg { + /* Address Incrementing */ + unsigned dst_inc:1; + unsigned src_inc:1; + + /* + * For now, the SRC & DST protection levels + * and burst size/length are assumed same. + */ + bool nonsecure; + bool privileged; + bool insnaccess; + unsigned brst_len:5; + unsigned brst_size:3; /* in power of 2 */ + + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + enum pl330_byteswap swap; +}; + +/* + * One cycle of DMAC operation. + * There may be more than one xfer in a request. + */ +struct pl330_xfer { + u32 src_addr; + u32 dst_addr; + /* Size to xfer */ + u32 bytes; + /* + * Pointer to next xfer in the list. + * The last xfer in the req must point to NULL. + */ + struct pl330_xfer *next; +}; + +/* The xfer callbacks are made with one of these arguments. */ +enum pl330_op_err { + /* The all xfers in the request were success. */ + PL330_ERR_NONE, + /* If req aborted due to global error. */ + PL330_ERR_ABORT, + /* If req failed due to problem with Channel. */ + PL330_ERR_FAIL, +}; + +/* A request defining Scatter-Gather List ending with NULL xfer. */ +struct pl330_req { + enum pl330_reqtype rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Unique token for this xfer, set by the client. */ + void *token; + /* Callback to be called after xfer. */ + void (*xfer_cb)(void *token, enum pl330_op_err err); + /* If NULL, req will be done at last set parameters. */ + struct pl330_reqcfg *cfg; + /* Pointer to first xfer in the request. */ + struct pl330_xfer *x; +}; + +/* + * To know the status of the channel and DMAC, the client + * provides a pointer to this structure. The PL330 core + * fills it with current information. + */ +struct pl330_chanstatus { + /* + * If the DMAC engine halted due to some error, + * the client should remove-add DMAC. + */ + bool dmac_halted; + /* + * If channel is halted due to some error, + * the client should ABORT/FLUSH and START the channel. + */ + bool faulting; + /* Location of last load */ + u32 src_addr; + /* Location of last store */ + u32 dst_addr; + /* + * Pointer to the currently active req, NULL if channel is + * inactive, even though the requests may be present. + */ + struct pl330_req *top_req; + /* Pointer to req waiting second in the queue if any. */ + struct pl330_req *wait_req; +}; + +enum pl330_chan_op { + /* Start the channel */ + PL330_OP_START, + /* Abort the active xfer */ + PL330_OP_ABORT, + /* Stop xfer and flush queue */ + PL330_OP_FLUSH, +}; + +struct _xfer_spec { + u32 ccr; + struct pl330_req *r; + struct pl330_xfer *x; +}; + +enum dmamov_dst { + SAR = 0, + CCR, + DAR, +}; + +enum pl330_dst { + SRC = 0, + DST, +}; + +enum pl330_cond { + SINGLE, + BURST, + ALWAYS, +}; + +struct _pl330_req { + u32 mc_bus; + void *mc_cpu; + /* Number of bytes taken to setup MC for the req */ + u32 mc_len; + struct pl330_req *r; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; +}; + +/* ToBeDone for tasklet */ +struct _pl330_tbd { + bool reset_dmac; + bool reset_mngr; + u8 reset_chan; +}; + +/* A DMAC Thread */ +struct pl330_thread { + u8 id; + int ev; + /* If the channel is not yet acquired by any client */ + bool free; + /* Parent DMAC */ + struct pl330_dmac *dmac; + /* Only two at a time */ + struct _pl330_req req[2]; + /* Index of the last enqueued request */ + unsigned lstenq; + /* Index of the last submitted request or -1 if the DMA is stopped */ + int req_running; +}; + +enum pl330_dmac_state { + UNINIT, + INIT, + DYING, +}; + +/* A DMAC */ +struct pl330_dmac { + spinlock_t lock; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + /* Pointer to platform specific stuff */ + struct pl330_info *pinfo; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + u32 mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; +}; + enum desc_status { /* In the DMAC pool */ FREE, @@ -117,6 +605,1630 @@ struct dma_pl330_desc { struct dma_pl330_chan *pchan; }; +static inline void _callback(struct pl330_req *r, enum pl330_op_err err) +{ + if (r && r->xfer_cb) + r->xfer_cb(r->token, err); +} + +static inline bool _queue_empty(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) + ? true : false; +} + +static inline bool _queue_full(struct pl330_thread *thrd) +{ + return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) + ? false : true; +} + +static inline bool is_manager(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + /* MANAGER is indexed at the end */ + if (thrd->id == pl330->pinfo->pcfg.num_chan) + return true; + else + return false; +} + +/* If manager of the thread is in Non-Secure mode */ +static inline bool _manager_ns(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + + return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; +} + +static inline u32 get_id(struct pl330_info *pi, u32 off) +{ + void __iomem *regs = pi->base; + u32 id = 0; + + id |= (readb(regs + off + 0x0) << 0); + id |= (readb(regs + off + 0x4) << 8); + id |= (readb(regs + off + 0x8) << 16); + id |= (readb(regs + off + 0xc) << 24); + + return id; +} + +static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], + enum pl330_dst da, u16 val) +{ + if (dry_run) + return SZ_DMAADDH; + + buf[0] = CMD_DMAADDH; + buf[0] |= (da << 1); + *((u16 *)&buf[1]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", + da == 1 ? "DA" : "SA", val); + + return SZ_DMAADDH; +} + +static inline u32 _emit_END(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAEND; + + buf[0] = CMD_DMAEND; + + PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n"); + + return SZ_DMAEND; +} + +static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri) +{ + if (dry_run) + return SZ_DMAFLUSHP; + + buf[0] = CMD_DMAFLUSHP; + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3); + + return SZ_DMAFLUSHP; +} + +static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMALD; + + buf[0] = CMD_DMALD; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMALD; +} + +static inline u32 _emit_LDP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMALDP; + + buf[0] = CMD_DMALDP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMALDP; +} + +static inline u32 _emit_LP(unsigned dry_run, u8 buf[], + unsigned loop, u8 cnt) +{ + if (dry_run) + return SZ_DMALP; + + buf[0] = CMD_DMALP; + + if (loop) + buf[0] |= (1 << 1); + + cnt--; /* DMAC increments by 1 internally */ + buf[1] = cnt; + + PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt); + + return SZ_DMALP; +} + +struct _arg_LPEND { + enum pl330_cond cond; + bool forever; + unsigned loop; + u8 bjump; +}; + +static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[], + const struct _arg_LPEND *arg) +{ + enum pl330_cond cond = arg->cond; + bool forever = arg->forever; + unsigned loop = arg->loop; + u8 bjump = arg->bjump; + + if (dry_run) + return SZ_DMALPEND; + + buf[0] = CMD_DMALPEND; + + if (loop) + buf[0] |= (1 << 2); + + if (!forever) + buf[0] |= (1 << 4); + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + buf[1] = bjump; + + PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n", + forever ? "FE" : "END", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'), + loop ? '1' : '0', + bjump); + + return SZ_DMALPEND; +} + +static inline u32 _emit_KILL(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAKILL; + + buf[0] = CMD_DMAKILL; + + return SZ_DMAKILL; +} + +static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], + enum dmamov_dst dst, u32 val) +{ + if (dry_run) + return SZ_DMAMOV; + + buf[0] = CMD_DMAMOV; + buf[1] = dst; + *((u32 *)&buf[2]) = val; + + PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", + dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); + + return SZ_DMAMOV; +} + +static inline u32 _emit_NOP(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMANOP; + + buf[0] = CMD_DMANOP; + + PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n"); + + return SZ_DMANOP; +} + +static inline u32 _emit_RMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMARMB; + + buf[0] = CMD_DMARMB; + + PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n"); + + return SZ_DMARMB; +} + +static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev) +{ + if (dry_run) + return SZ_DMASEV; + + buf[0] = CMD_DMASEV; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3); + + return SZ_DMASEV; +} + +static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond) +{ + if (dry_run) + return SZ_DMAST; + + buf[0] = CMD_DMAST; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (1 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (1 << 0); + + PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A')); + + return SZ_DMAST; +} + +static inline u32 _emit_STP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMASTP; + + buf[0] = CMD_DMASTP; + + if (cond == BURST) + buf[0] |= (1 << 1); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n", + cond == SINGLE ? 'S' : 'B', peri >> 3); + + return SZ_DMASTP; +} + +static inline u32 _emit_STZ(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMASTZ; + + buf[0] = CMD_DMASTZ; + + PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n"); + + return SZ_DMASTZ; +} + +static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev, + unsigned invalidate) +{ + if (dry_run) + return SZ_DMAWFE; + + buf[0] = CMD_DMAWFE; + + ev &= 0x1f; + ev <<= 3; + buf[1] = ev; + + if (invalidate) + buf[1] |= (1 << 1); + + PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n", + ev >> 3, invalidate ? ", I" : ""); + + return SZ_DMAWFE; +} + +static inline u32 _emit_WFP(unsigned dry_run, u8 buf[], + enum pl330_cond cond, u8 peri) +{ + if (dry_run) + return SZ_DMAWFP; + + buf[0] = CMD_DMAWFP; + + if (cond == SINGLE) + buf[0] |= (0 << 1) | (0 << 0); + else if (cond == BURST) + buf[0] |= (1 << 1) | (0 << 0); + else + buf[0] |= (0 << 1) | (1 << 0); + + peri &= 0x1f; + peri <<= 3; + buf[1] = peri; + + PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n", + cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3); + + return SZ_DMAWFP; +} + +static inline u32 _emit_WMB(unsigned dry_run, u8 buf[]) +{ + if (dry_run) + return SZ_DMAWMB; + + buf[0] = CMD_DMAWMB; + + PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n"); + + return SZ_DMAWMB; +} + +struct _arg_GO { + u8 chan; + u32 addr; + unsigned ns; +}; + +static inline u32 _emit_GO(unsigned dry_run, u8 buf[], + const struct _arg_GO *arg) +{ + u8 chan = arg->chan; + u32 addr = arg->addr; + unsigned ns = arg->ns; + + if (dry_run) + return SZ_DMAGO; + + buf[0] = CMD_DMAGO; + buf[0] |= (ns << 1); + + buf[1] = chan & 0x7; + + *((u32 *)&buf[2]) = addr; + + return SZ_DMAGO; +} + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +/* Returns Time-Out */ +static bool _until_dmac_idle(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + unsigned long loops = msecs_to_loops(5); + + do { + /* Until Manager is Idle */ + if (!(readl(regs + DBGSTATUS) & DBG_BUSY)) + break; + + cpu_relax(); + } while (--loops); + + if (!loops) + return true; + + return false; +} + +static inline void _execute_DBGINSN(struct pl330_thread *thrd, + u8 insn[], bool as_manager) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + val = (insn[0] << 16) | (insn[1] << 24); + if (!as_manager) { + val |= (1 << 0); + val |= (thrd->id << 8); /* Channel Number */ + } + writel(val, regs + DBGINST0); + + val = *((u32 *)&insn[2]); + writel(val, regs + DBGINST1); + + /* If timed out due to halted state-machine */ + if (_until_dmac_idle(thrd)) { + dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); + return; + } + + /* Get going */ + writel(0, regs + DBGCMD); +} + +/* + * Mark a _pl330_req as free. + * We do it by writing DMAEND as the first instruction + * because no valid request is going to have DMAEND as + * its first instruction to execute. + */ +static void mark_free(struct pl330_thread *thrd, int idx) +{ + struct _pl330_req *req = &thrd->req[idx]; + + _emit_END(0, req->mc_cpu); + req->mc_len = 0; + + thrd->req_running = -1; +} + +static inline u32 _state(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u32 val; + + if (is_manager(thrd)) + val = readl(regs + DS) & 0xf; + else + val = readl(regs + CS(thrd->id)) & 0xf; + + switch (val) { + case DS_ST_STOP: + return PL330_STATE_STOPPED; + case DS_ST_EXEC: + return PL330_STATE_EXECUTING; + case DS_ST_CMISS: + return PL330_STATE_CACHEMISS; + case DS_ST_UPDTPC: + return PL330_STATE_UPDTPC; + case DS_ST_WFE: + return PL330_STATE_WFE; + case DS_ST_FAULT: + return PL330_STATE_FAULTING; + case DS_ST_ATBRR: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_ATBARRIER; + case DS_ST_QBUSY: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_QUEUEBUSY; + case DS_ST_WFP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_WFP; + case DS_ST_KILL: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_KILLING; + case DS_ST_CMPLT: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_COMPLETING; + case DS_ST_FLTCMP: + if (is_manager(thrd)) + return PL330_STATE_INVALID; + else + return PL330_STATE_FAULT_COMPLETING; + default: + return PL330_STATE_INVALID; + } +} + +static void _stop(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + + if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + /* Return if nothing needs to be done */ + if (_state(thrd) == PL330_STATE_COMPLETING + || _state(thrd) == PL330_STATE_KILLING + || _state(thrd) == PL330_STATE_STOPPED) + return; + + _emit_KILL(0, insn); + + /* Stop generating interrupts for SEV */ + writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN); + + _execute_DBGINSN(thrd, insn, is_manager(thrd)); +} + +/* Start doing req 'idx' of thread 'thrd' */ +static bool _trigger(struct pl330_thread *thrd) +{ + void __iomem *regs = thrd->dmac->pinfo->base; + struct _pl330_req *req; + struct pl330_req *r; + struct _arg_GO go; + unsigned ns; + u8 insn[6] = {0, 0, 0, 0, 0, 0}; + int idx; + + /* Return if already ACTIVE */ + if (_state(thrd) != PL330_STATE_STOPPED) + return true; + + idx = 1 - thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else { + idx = thrd->lstenq; + if (!IS_FREE(&thrd->req[idx])) + req = &thrd->req[idx]; + else + req = NULL; + } + + /* Return if no request */ + if (!req || !req->r) + return true; + + r = req->r; + + if (r->cfg) + ns = r->cfg->nonsecure ? 1 : 0; + else if (readl(regs + CS(thrd->id)) & CS_CNS) + ns = 1; + else + ns = 0; + + /* See 'Abort Sources' point-4 at Page 2-25 */ + if (_manager_ns(thrd) && !ns) + dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", + __func__, __LINE__); + + go.chan = thrd->id; + go.addr = req->mc_bus; + go.ns = ns; + _emit_GO(0, insn, &go); + + /* Set to generate interrupts for SEV */ + writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN); + + /* Only manager can execute GO */ + _execute_DBGINSN(thrd, insn, true); + + thrd->req_running = idx; + + return true; +} + +static bool _start(struct pl330_thread *thrd) +{ + switch (_state(thrd)) { + case PL330_STATE_FAULT_COMPLETING: + UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING); + + if (_state(thrd) == PL330_STATE_KILLING) + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_FAULTING: + _stop(thrd); + + case PL330_STATE_KILLING: + case PL330_STATE_COMPLETING: + UNTIL(thrd, PL330_STATE_STOPPED) + + case PL330_STATE_STOPPED: + return _trigger(thrd); + + case PL330_STATE_WFP: + case PL330_STATE_QUEUEBUSY: + case PL330_STATE_ATBARRIER: + case PL330_STATE_UPDTPC: + case PL330_STATE_CACHEMISS: + case PL330_STATE_EXECUTING: + return true; + + case PL330_STATE_WFE: /* For RESUME, nothing yet */ + default: + return false; + } +} + +static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_RMB(dry_run, &buf[off]); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_WMB(dry_run, &buf[off]); + } + + return off; +} + +static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_ST(dry_run, &buf[off], ALWAYS); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + while (cyc--) { + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_LD(dry_run, &buf[off], ALWAYS); + off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + } + + return off; +} + +static int _bursts(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs, int cyc) +{ + int off = 0; + + switch (pxs->r->rqtype) { + case MEMTODEV: + off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); + break; + case DEVTOMEM: + off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); + break; + case MEMTOMEM: + off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); + break; + default: + off += 0x40000000; /* Scare off the Client */ + break; + } + + return off; +} + +/* Returns bytes consumed and updates bursts */ +static inline int _loop(unsigned dry_run, u8 buf[], + unsigned long *bursts, const struct _xfer_spec *pxs) +{ + int cyc, cycmax, szlp, szlpend, szbrst, off; + unsigned lcnt0, lcnt1, ljmp0, ljmp1; + struct _arg_LPEND lpend; + + /* Max iterations possible in DMALP is 256 */ + if (*bursts >= 256*256) { + lcnt1 = 256; + lcnt0 = 256; + cyc = *bursts / lcnt1 / lcnt0; + } else if (*bursts > 256) { + lcnt1 = 256; + lcnt0 = *bursts / lcnt1; + cyc = 1; + } else { + lcnt1 = *bursts; + lcnt0 = 0; + cyc = 1; + } + + szlp = _emit_LP(1, buf, 0, 0); + szbrst = _bursts(1, buf, pxs, 1); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = 0; + szlpend = _emit_LPEND(1, buf, &lpend); + + if (lcnt0) { + szlp *= 2; + szlpend *= 2; + } + + /* + * Max bursts that we can unroll due to limit on the + * size of backward jump that can be encoded in DMALPEND + * which is 8-bits and hence 255 + */ + cycmax = (255 - (szlp + szlpend)) / szbrst; + + cyc = (cycmax < cyc) ? cycmax : cyc; + + off = 0; + + if (lcnt0) { + off += _emit_LP(dry_run, &buf[off], 0, lcnt0); + ljmp0 = off; + } + + off += _emit_LP(dry_run, &buf[off], 1, lcnt1); + ljmp1 = off; + + off += _bursts(dry_run, &buf[off], pxs, cyc); + + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 1; + lpend.bjump = off - ljmp1; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + + if (lcnt0) { + lpend.cond = ALWAYS; + lpend.forever = false; + lpend.loop = 0; + lpend.bjump = off - ljmp0; + off += _emit_LPEND(dry_run, &buf[off], &lpend); + } + + *bursts = lcnt1 * cyc; + if (lcnt0) + *bursts *= lcnt0; + + return off; +} + +static inline int _setup_loops(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + u32 ccr = pxs->ccr; + unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); + int off = 0; + + while (bursts) { + c = bursts; + off += _loop(dry_run, &buf[off], &c, pxs); + bursts -= c; + } + + return off; +} + +static inline int _setup_xfer(unsigned dry_run, u8 buf[], + const struct _xfer_spec *pxs) +{ + struct pl330_xfer *x = pxs->x; + int off = 0; + + /* DMAMOV SAR, x->src_addr */ + off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr); + /* DMAMOV DAR, x->dst_addr */ + off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr); + + /* Setup Loop(s) */ + off += _setup_loops(dry_run, &buf[off], pxs); + + return off; +} + +/* + * A req is a sequence of one or more xfer units. + * Returns the number of bytes taken to setup the MC for the req. + */ +static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, + unsigned index, struct _xfer_spec *pxs) +{ + struct _pl330_req *req = &thrd->req[index]; + struct pl330_xfer *x; + u8 *buf = req->mc_cpu; + int off = 0; + + PL330_DBGMC_START(req->mc_bus); + + /* DMAMOV CCR, ccr */ + off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); + + x = pxs->r->x; + do { + /* Error if xfer length is not aligned at burst size */ + if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) + return -EINVAL; + + pxs->x = x; + off += _setup_xfer(dry_run, &buf[off], pxs); + + x = x->next; + } while (x); + + /* DMASEV peripheral/event */ + off += _emit_SEV(dry_run, &buf[off], thrd->ev); + /* DMAEND */ + off += _emit_END(dry_run, &buf[off]); + + return off; +} + +static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) +{ + u32 ccr = 0; + + if (rqc->src_inc) + ccr |= CC_SRCINC; + + if (rqc->dst_inc) + ccr |= CC_DSTINC; + + /* We set same protection levels for Src and DST for now */ + if (rqc->privileged) + ccr |= CC_SRCPRI | CC_DSTPRI; + if (rqc->nonsecure) + ccr |= CC_SRCNS | CC_DSTNS; + if (rqc->insnaccess) + ccr |= CC_SRCIA | CC_DSTIA; + + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT); + ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT); + + ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT); + ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT); + + ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT); + ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT); + + ccr |= (rqc->swap << CC_SWAP_SHFT); + + return ccr; +} + +static inline bool _is_valid(u32 ccr) +{ + enum pl330_dstcachectrl dcctl; + enum pl330_srccachectrl scctl; + + dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; + scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; + + if (dcctl == DINVALID1 || dcctl == DINVALID2 + || scctl == SINVALID1 || scctl == SINVALID2) + return false; + else + return true; +} + +/* + * Submit a list of xfers after which the client wants notification. + * Client is not notified after each xfer unit, just once after all + * xfer units are done or some error occurs. + */ +static int pl330_submit_req(void *ch_id, struct pl330_req *r) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + struct _xfer_spec xs; + unsigned long flags; + void __iomem *regs; + unsigned idx; + u32 ccr; + int ret = 0; + + /* No Req or Unacquired Channel or DMAC */ + if (!r || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + if (pl330->state == DYING + || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { + dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", + __func__, __LINE__); + return -EAGAIN; + } + + /* If request for non-existing peripheral */ + if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Invalid peripheral(%u)!\n", + __func__, __LINE__, r->peri); + return -EINVAL; + } + + spin_lock_irqsave(&pl330->lock, flags); + + if (_queue_full(thrd)) { + ret = -EAGAIN; + goto xfer_exit; + } + + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + + /* Use last settings, if not provided */ + if (r->cfg) + ccr = _prepare_ccr(r->cfg); + else + ccr = readl(regs + CC(thrd->id)); + + /* If this req doesn't have valid xfer settings */ + if (!_is_valid(ccr)) { + ret = -EINVAL; + dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", + __func__, __LINE__, ccr); + goto xfer_exit; + } + + idx = IS_FREE(&thrd->req[0]) ? 0 : 1; + + xs.ccr = ccr; + xs.r = r; + + /* First dry run to check if req is acceptable */ + ret = _setup_req(1, thrd, idx, &xs); + if (ret < 0) + goto xfer_exit; + + if (ret > pi->mcbufsz / 2) { + dev_info(thrd->dmac->pinfo->dev, + "%s:%d Trying increasing mcbufsz\n", + __func__, __LINE__); + ret = -ENOMEM; + goto xfer_exit; + } + + /* Hook the request */ + thrd->lstenq = idx; + thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); + thrd->req[idx].r = r; + + ret = 0; + +xfer_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + return ret; +} + +static void pl330_dotask(unsigned long data) +{ + struct pl330_dmac *pl330 = (struct pl330_dmac *) data; + struct pl330_info *pi = pl330->pinfo; + unsigned long flags; + int i; + + spin_lock_irqsave(&pl330->lock, flags); + + /* The DMAC itself gone nuts */ + if (pl330->dmac_tbd.reset_dmac) { + pl330->state = DYING; + /* Reset the manager too */ + pl330->dmac_tbd.reset_mngr = true; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_dmac = false; + } + + if (pl330->dmac_tbd.reset_mngr) { + _stop(pl330->manager); + /* Reset all channels */ + pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; + /* Clear the reset flag */ + pl330->dmac_tbd.reset_mngr = false; + } + + for (i = 0; i < pi->pcfg.num_chan; i++) { + + if (pl330->dmac_tbd.reset_chan & (1 << i)) { + struct pl330_thread *thrd = &pl330->channels[i]; + void __iomem *regs = pi->base; + enum pl330_op_err err; + + _stop(thrd); + + if (readl(regs + FSC) & (1 << thrd->id)) + err = PL330_ERR_FAIL; + else + err = PL330_ERR_ABORT; + + spin_unlock_irqrestore(&pl330->lock, flags); + + _callback(thrd->req[1 - thrd->lstenq].r, err); + _callback(thrd->req[thrd->lstenq].r, err); + + spin_lock_irqsave(&pl330->lock, flags); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + mark_free(thrd, 0); + mark_free(thrd, 1); + + /* Clear the reset flag */ + pl330->dmac_tbd.reset_chan &= ~(1 << i); + } + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return; +} + +/* Returns 1 if state was updated, 0 otherwise */ +static int pl330_update(const struct pl330_info *pi) +{ + struct _pl330_req *rqdone; + struct pl330_dmac *pl330; + unsigned long flags; + void __iomem *regs; + u32 val; + int id, ev, ret = 0; + + if (!pi || !pi->pl330_data) + return 0; + + regs = pi->base; + pl330 = pi->pl330_data; + + spin_lock_irqsave(&pl330->lock, flags); + + val = readl(regs + FSM) & 0x1; + if (val) + pl330->dmac_tbd.reset_mngr = true; + else + pl330->dmac_tbd.reset_mngr = false; + + val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); + pl330->dmac_tbd.reset_chan |= val; + if (val) { + int i = 0; + while (i < pi->pcfg.num_chan) { + if (val & (1 << i)) { + dev_info(pi->dev, + "Reset Channel-%d\t CS-%x FTC-%x\n", + i, readl(regs + CS(i)), + readl(regs + FTC(i))); + _stop(&pl330->channels[i]); + } + i++; + } + } + + /* Check which event happened i.e, thread notified */ + val = readl(regs + ES); + if (pi->pcfg.num_events < 32 + && val & ~((1 << pi->pcfg.num_events) - 1)) { + pl330->dmac_tbd.reset_dmac = true; + dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); + ret = 1; + goto updt_exit; + } + + for (ev = 0; ev < pi->pcfg.num_events; ev++) { + if (val & (1 << ev)) { /* Event occurred */ + struct pl330_thread *thrd; + u32 inten = readl(regs + INTEN); + int active; + + /* Clear the event */ + if (inten & (1 << ev)) + writel(1 << ev, regs + INTCLR); + + ret = 1; + + id = pl330->events[ev]; + + thrd = &pl330->channels[id]; + + active = thrd->req_running; + if (active == -1) /* Aborted */ + continue; + + rqdone = &thrd->req[active]; + mark_free(thrd, active); + + /* Get going again ASAP */ + _start(thrd); + + /* For now, just make a list of callbacks to be done */ + list_add_tail(&rqdone->rqd, &pl330->req_done); + } + } + + /* Now that we are in no hurry, do the callbacks */ + while (!list_empty(&pl330->req_done)) { + struct pl330_req *r; + + rqdone = container_of(pl330->req_done.next, + struct _pl330_req, rqd); + + list_del_init(&rqdone->rqd); + + /* Detach the req */ + r = rqdone->r; + rqdone->r = NULL; + + spin_unlock_irqrestore(&pl330->lock, flags); + _callback(r, PL330_ERR_NONE); + spin_lock_irqsave(&pl330->lock, flags); + } + +updt_exit: + spin_unlock_irqrestore(&pl330->lock, flags); + + if (pl330->dmac_tbd.reset_dmac + || pl330->dmac_tbd.reset_mngr + || pl330->dmac_tbd.reset_chan) { + ret = 1; + tasklet_schedule(&pl330->tasks); + } + + return ret; +} + +static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + int ret = 0, active = thrd->req_running; + + if (!thrd || thrd->free || thrd->dmac->state == DYING) + return -EINVAL; + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + + switch (op) { + case PL330_OP_FLUSH: + /* Make sure the channel is stopped */ + _stop(thrd); + + thrd->req[0].r = NULL; + thrd->req[1].r = NULL; + mark_free(thrd, 0); + mark_free(thrd, 1); + break; + + case PL330_OP_ABORT: + /* Make sure the channel is stopped */ + _stop(thrd); + + /* ABORT is only for the active req */ + if (active == -1) + break; + + thrd->req[active].r = NULL; + mark_free(thrd, active); + + /* Start the next */ + case PL330_OP_START: + if ((active == -1) && !_start(thrd)) + ret = -EIO; + break; + + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + return ret; +} + +static int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + struct pl330_info *pi; + void __iomem *regs; + int active; + u32 val; + + if (!pstatus || !thrd || thrd->free) + return -EINVAL; + + pl330 = thrd->dmac; + pi = pl330->pinfo; + regs = pi->base; + + /* The client should remove the DMAC and add again */ + if (pl330->state == DYING) + pstatus->dmac_halted = true; + else + pstatus->dmac_halted = false; + + val = readl(regs + FSC); + if (val & (1 << thrd->id)) + pstatus->faulting = true; + else + pstatus->faulting = false; + + active = thrd->req_running; + + if (active == -1) { + /* Indicate that the thread is not running */ + pstatus->top_req = NULL; + pstatus->wait_req = NULL; + } else { + pstatus->top_req = thrd->req[active].r; + pstatus->wait_req = !IS_FREE(&thrd->req[1 - active]) + ? thrd->req[1 - active].r : NULL; + } + + pstatus->src_addr = readl(regs + SA(thrd->id)); + pstatus->dst_addr = readl(regs + DA(thrd->id)); + + return 0; +} + +/* Reserve an event */ +static inline int _alloc_event(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + int ev; + + for (ev = 0; ev < pi->pcfg.num_events; ev++) + if (pl330->events[ev] == -1) { + pl330->events[ev] = thrd->id; + return ev; + } + + return -1; +} + +static bool _chan_ns(const struct pl330_info *pi, int i) +{ + return pi->pcfg.irq_ns & (1 << i); +} + +/* Upon success, returns IdentityToken for the + * allocated channel, NULL otherwise. + */ +static void *pl330_request_channel(const struct pl330_info *pi) +{ + struct pl330_thread *thrd = NULL; + struct pl330_dmac *pl330; + unsigned long flags; + int chans, i; + + if (!pi || !pi->pl330_data) + return NULL; + + pl330 = pi->pl330_data; + + if (pl330->state == DYING) + return NULL; + + chans = pi->pcfg.num_chan; + + spin_lock_irqsave(&pl330->lock, flags); + + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + if ((thrd->free) && (!_manager_ns(thrd) || + _chan_ns(pi, i))) { + thrd->ev = _alloc_event(thrd); + if (thrd->ev >= 0) { + thrd->free = false; + thrd->lstenq = 1; + thrd->req[0].r = NULL; + mark_free(thrd, 0); + thrd->req[1].r = NULL; + mark_free(thrd, 1); + break; + } + } + thrd = NULL; + } + + spin_unlock_irqrestore(&pl330->lock, flags); + + return thrd; +} + +/* Release an event */ +static inline void _free_event(struct pl330_thread *thrd, int ev) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + /* If the event is valid and was held by the thread */ + if (ev >= 0 && ev < pi->pcfg.num_events + && pl330->events[ev] == thrd->id) + pl330->events[ev] = -1; +} + +static void pl330_release_channel(void *ch_id) +{ + struct pl330_thread *thrd = ch_id; + struct pl330_dmac *pl330; + unsigned long flags; + + if (!thrd || thrd->free) + return; + + _stop(thrd); + + _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); + _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); + + pl330 = thrd->dmac; + + spin_lock_irqsave(&pl330->lock, flags); + _free_event(thrd, thrd->ev); + thrd->free = true; + spin_unlock_irqrestore(&pl330->lock, flags); +} + +/* Initialize the structure for PL330 configuration, that can be used + * by the client driver the make best use of the DMAC + */ +static void read_dmac_config(struct pl330_info *pi) +{ + void __iomem *regs = pi->base; + u32 val; + + val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; + val &= CRD_DATA_WIDTH_MASK; + pi->pcfg.data_bus_width = 8 * (1 << val); + + val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; + val &= CRD_DATA_BUFF_MASK; + pi->pcfg.data_buf_dep = val + 1; + + val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; + val &= CR0_NUM_CHANS_MASK; + val += 1; + pi->pcfg.num_chan = val; + + val = readl(regs + CR0); + if (val & CR0_PERIPH_REQ_SET) { + val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; + val += 1; + pi->pcfg.num_peri = val; + pi->pcfg.peri_ns = readl(regs + CR4); + } else { + pi->pcfg.num_peri = 0; + } + + val = readl(regs + CR0); + if (val & CR0_BOOT_MAN_NS) + pi->pcfg.mode |= DMAC_MODE_NS; + else + pi->pcfg.mode &= ~DMAC_MODE_NS; + + val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; + val &= CR0_NUM_EVENTS_MASK; + val += 1; + pi->pcfg.num_events = val; + + pi->pcfg.irq_ns = readl(regs + CR3); + + pi->pcfg.periph_id = get_id(pi, PERIPH_ID); + pi->pcfg.pcell_id = get_id(pi, PCELL_ID); +} + +static inline void _reset_thread(struct pl330_thread *thrd) +{ + struct pl330_dmac *pl330 = thrd->dmac; + struct pl330_info *pi = pl330->pinfo; + + thrd->req[0].mc_cpu = pl330->mcode_cpu + + (thrd->id * pi->mcbufsz); + thrd->req[0].mc_bus = pl330->mcode_bus + + (thrd->id * pi->mcbufsz); + thrd->req[0].r = NULL; + mark_free(thrd, 0); + + thrd->req[1].mc_cpu = thrd->req[0].mc_cpu + + pi->mcbufsz / 2; + thrd->req[1].mc_bus = thrd->req[0].mc_bus + + pi->mcbufsz / 2; + thrd->req[1].r = NULL; + mark_free(thrd, 1); +} + +static int dmac_alloc_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Allocate 1 Manager and 'chans' Channel threads */ + pl330->channels = kzalloc((1 + chans) * sizeof(*thrd), + GFP_KERNEL); + if (!pl330->channels) + return -ENOMEM; + + /* Init Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + thrd->id = i; + thrd->dmac = pl330; + _reset_thread(thrd); + thrd->free = true; + } + + /* MANAGER is indexed at the end */ + thrd = &pl330->channels[chans]; + thrd->id = chans; + thrd->dmac = pl330; + thrd->free = false; + pl330->manager = thrd; + + return 0; +} + +static int dmac_alloc_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + int ret; + + /* + * Alloc MicroCode buffer for 'chans' Channel threads. + * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) + */ + pl330->mcode_cpu = dma_alloc_coherent(pi->dev, + chans * pi->mcbufsz, + &pl330->mcode_bus, GFP_KERNEL); + if (!pl330->mcode_cpu) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + ret = dmac_alloc_threads(pl330); + if (ret) { + dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", + __func__, __LINE__); + dma_free_coherent(pi->dev, + chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); + return ret; + } + + return 0; +} + +static int pl330_add(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + void __iomem *regs; + int i, ret; + + if (!pi || !pi->dev) + return -EINVAL; + + /* If already added */ + if (pi->pl330_data) + return -EINVAL; + + /* + * If the SoC can perform reset on the DMAC, then do it + * before reading its configuration. + */ + if (pi->dmac_reset) + pi->dmac_reset(pi); + + regs = pi->base; + + /* Check if we can handle this DMAC */ + if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL + || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { + dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", + get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); + return -EINVAL; + } + + /* Read the configuration of the DMAC */ + read_dmac_config(pi); + + if (pi->pcfg.num_events == 0) { + dev_err(pi->dev, "%s:%d Can't work without events!\n", + __func__, __LINE__); + return -EINVAL; + } + + pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); + if (!pl330) { + dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + __func__, __LINE__); + return -ENOMEM; + } + + /* Assign the info structure and private data */ + pl330->pinfo = pi; + pi->pl330_data = pl330; + + spin_lock_init(&pl330->lock); + + INIT_LIST_HEAD(&pl330->req_done); + + /* Use default MC buffer size if not provided */ + if (!pi->mcbufsz) + pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; + + /* Mark all events as free */ + for (i = 0; i < pi->pcfg.num_events; i++) + pl330->events[i] = -1; + + /* Allocate resources needed by the DMAC */ + ret = dmac_alloc_resources(pl330); + if (ret) { + dev_err(pi->dev, "Unable to create channels for DMAC\n"); + kfree(pl330); + return ret; + } + + tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330); + + pl330->state = INIT; + + return 0; +} + +static int dmac_free_threads(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + struct pl330_thread *thrd; + int i; + + /* Release Channel threads */ + for (i = 0; i < chans; i++) { + thrd = &pl330->channels[i]; + pl330_release_channel((void *)thrd); + } + + /* Free memory */ + kfree(pl330->channels); + + return 0; +} + +static void dmac_free_resources(struct pl330_dmac *pl330) +{ + struct pl330_info *pi = pl330->pinfo; + int chans = pi->pcfg.num_chan; + + dmac_free_threads(pl330); + + dma_free_coherent(pi->dev, chans * pi->mcbufsz, + pl330->mcode_cpu, pl330->mcode_bus); +} + +static void pl330_del(struct pl330_info *pi) +{ + struct pl330_dmac *pl330; + + if (!pi || !pi->pl330_data) + return; + + pl330 = pi->pl330_data; + + pl330->state = UNINIT; + + tasklet_kill(&pl330->tasks); + + /* Free DMAC resources */ + dmac_free_resources(pl330); + + kfree(pl330); + pi->pl330_data = NULL; +} + /* forward declaration */ static struct amba_driver pl330_driver; diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index 12e023c19ac..fe93758e840 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -13,7 +13,6 @@ #define __AMBA_PL330_H_ #include -#include struct dma_pl330_platdata { /* -- cgit v1.2.3-70-g09d2 From 4d4e58de32a192fea65ab84509d17d199bd291c8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 6 Mar 2012 22:34:06 +0000 Subject: dmaengine: move last completed cookie into generic dma_chan structure Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King Tested-by: Linus Walleij Reviewed-by: Linus Walleij Acked-by: Jassi Brar [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo Signed-off-by: Vinod Koul --- arch/arm/include/asm/hardware/iop_adma.h | 2 -- drivers/dma/amba-pl08x.c | 8 ++++---- drivers/dma/at_hdmac.c | 10 +++++----- drivers/dma/at_hdmac_regs.h | 2 -- drivers/dma/coh901318.c | 7 +++---- drivers/dma/dw_dmac.c | 10 +++++----- drivers/dma/dw_dmac_regs.h | 1 - drivers/dma/ep93xx_dma.c | 8 +++----- drivers/dma/fsldma.c | 4 ++-- drivers/dma/fsldma.h | 1 - drivers/dma/imx-dma.c | 7 +++---- drivers/dma/imx-sdma.c | 5 ++--- drivers/dma/intel_mid_dma.c | 9 ++++----- drivers/dma/intel_mid_dma_regs.h | 2 -- drivers/dma/ioat/dma.c | 2 +- drivers/dma/ioat/dma.h | 4 +--- drivers/dma/ioat/dma_v2.c | 2 +- drivers/dma/ioat/dma_v3.c | 2 +- drivers/dma/iop-adma.c | 10 +++++----- drivers/dma/ipu/ipu_idmac.c | 10 ++++------ drivers/dma/mpc512x_dma.c | 7 +++---- drivers/dma/mv_xor.c | 6 +++--- drivers/dma/mv_xor.h | 2 -- drivers/dma/mxs-dma.c | 5 ++--- drivers/dma/pch_dma.c | 5 ++--- drivers/dma/pl330.c | 9 +++------ drivers/dma/ppc4xx/adma.c | 10 +++++----- drivers/dma/ppc4xx/adma.h | 2 -- drivers/dma/shdma.c | 10 +++++----- drivers/dma/shdma.h | 1 - drivers/dma/sirf-dma.c | 7 +++---- drivers/dma/ste_dma40.c | 10 +++------- drivers/dma/timb_dma.c | 7 +++---- drivers/dma/txx9dmac.c | 10 +++++----- drivers/dma/txx9dmac.h | 1 - include/linux/amba/pl08x.h | 2 -- include/linux/dmaengine.h | 2 ++ 37 files changed, 83 insertions(+), 119 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index 59b8c3892f7..122f86d8c99 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -49,7 +49,6 @@ struct iop_adma_device { /** * struct iop_adma_chan - internal representation of an ADMA device * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @lock: serializes enqueue/dequeue operations to the slot pool * @mmr_base: memory mapped register base * @chain: device chain view of the descriptors @@ -62,7 +61,6 @@ struct iop_adma_device { */ struct iop_adma_chan { int pending; - dma_cookie_t completed_cookie; spinlock_t lock; /* protects the descriptor slot pool */ void __iomem *mmr_base; struct list_head chain; diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 513184b4fdd..e510447a685 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -971,7 +971,7 @@ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, u32 bytesleft = 0; last_used = plchan->chan.cookie; - last_complete = plchan->lc; + last_complete = plchan->chan.completed_cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); if (ret == DMA_SUCCESS) { @@ -983,7 +983,7 @@ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, * This cookie not complete yet */ last_used = plchan->chan.cookie; - last_complete = plchan->lc; + last_complete = plchan->chan.completed_cookie; /* Get number of bytes left in the active transactions and queue */ bytesleft = pl08x_getbytes_chan(plchan); @@ -1543,7 +1543,7 @@ static void pl08x_tasklet(unsigned long data) if (txd) { /* Update last completed */ - plchan->lc = txd->tx.cookie; + plchan->chan.completed_cookie = txd->tx.cookie; } /* If a new descriptor is queued, set it up plchan->at is NULL here */ @@ -1725,7 +1725,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->chan.device = dmadev; chan->chan.cookie = 0; - chan->lc = 0; + chan->chan.completed_cookie = 0; spin_lock_init(&chan->lock); INIT_LIST_HEAD(&chan->pend_list); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index f4aed5fc2cb..6baf5d71726 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -269,7 +269,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) dev_vdbg(chan2dev(&atchan->chan_common), "descriptor %u complete\n", txd->cookie); - atchan->completed_cookie = txd->cookie; + atchan->chan_common.completed_cookie = txd->cookie; /* move children to free_list */ list_splice_init(&desc->tx_list, &atchan->free_list); @@ -1016,14 +1016,14 @@ atc_tx_status(struct dma_chan *chan, spin_lock_irqsave(&atchan->lock, flags); - last_complete = atchan->completed_cookie; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); if (ret != DMA_SUCCESS) { atc_cleanup_descriptors(atchan); - last_complete = atchan->completed_cookie; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -1129,7 +1129,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated = i; list_splice(&tmp_list, &atchan->free_list); - atchan->completed_cookie = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; spin_unlock_irqrestore(&atchan->lock, flags); /* channel parameters */ @@ -1329,7 +1329,7 @@ static int __init at_dma_probe(struct platform_device *pdev) struct at_dma_chan *atchan = &atdma->chan[i]; atchan->chan_common.device = &atdma->dma_common; - atchan->chan_common.cookie = atchan->completed_cookie = 1; + atchan->chan_common.cookie = atchan->chan_common.completed_cookie = 1; list_add_tail(&atchan->chan_common.device_node, &atdma->dma_common.channels); diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index a8d3277d60b..08fd8a0ae79 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -208,7 +208,6 @@ enum atc_status { * @save_dscr: for cyclic operations, preserve next descriptor address in * the cyclic list on suspend/resume cycle * @lock: serializes enqueue/dequeue operations to descriptors lists - * @completed_cookie: identifier for the most recently completed operation * @active_list: list of descriptors dmaengine is being running on * @queue: list of descriptors ready to be submitted to engine * @free_list: list of descriptors usable by the channel @@ -227,7 +226,6 @@ struct at_dma_chan { spinlock_t lock; /* these other elements are all protected by lock */ - dma_cookie_t completed_cookie; struct list_head active_list; struct list_head queue; struct list_head free_list; diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index d65a718c0f9..521434bc313 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -59,7 +59,6 @@ struct coh901318_base { struct coh901318_chan { spinlock_t lock; int allocated; - int completed; int id; int stopped; @@ -705,7 +704,7 @@ static void dma_tasklet(unsigned long data) callback_param = cohd_fin->desc.callback_param; /* sign this job as completed on the channel */ - cohc->completed = cohd_fin->desc.cookie; + cohc->chan.completed_cookie = cohd_fin->desc.cookie; /* release the lli allocation and remove the descriptor */ coh901318_lli_free(&cohc->base->pool, &cohd_fin->lli); @@ -929,7 +928,7 @@ static int coh901318_alloc_chan_resources(struct dma_chan *chan) coh901318_config(cohc, NULL); cohc->allocated = 1; - cohc->completed = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; spin_unlock_irqrestore(&cohc->lock, flags); @@ -1169,7 +1168,7 @@ coh901318_tx_status(struct dma_chan *chan, dma_cookie_t cookie, dma_cookie_t last_complete; int ret; - last_complete = cohc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 0e4b5c6a2f8..5bd23006ff4 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -249,7 +249,7 @@ dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc, dev_vdbg(chan2dev(&dwc->chan), "descriptor %u complete\n", txd->cookie); spin_lock_irqsave(&dwc->lock, flags); - dwc->completed = txd->cookie; + dwc->chan.completed_cookie = txd->cookie; if (callback_required) { callback = txd->callback; param = txd->callback_param; @@ -997,14 +997,14 @@ dwc_tx_status(struct dma_chan *chan, dma_cookie_t last_complete; int ret; - last_complete = dwc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); if (ret != DMA_SUCCESS) { dwc_scan_descriptors(to_dw_dma(chan->device), dwc); - last_complete = dwc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -1046,7 +1046,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) return -EIO; } - dwc->completed = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; /* * NOTE: some controllers may have additional features that we @@ -1474,7 +1474,7 @@ static int __init dw_probe(struct platform_device *pdev) struct dw_dma_chan *dwc = &dw->chan[i]; dwc->chan.device = &dw->dma; - dwc->chan.cookie = dwc->completed = 1; + dwc->chan.cookie = dwc->chan.completed_cookie = 1; if (pdata->chan_allocation_order == CHAN_ALLOCATION_ASCENDING) list_add_tail(&dwc->chan.device_node, &dw->dma.channels); diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index eec0481a12f..f298f69ecbf 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -158,7 +158,6 @@ struct dw_dma_chan { /* these other elements are all protected by lock */ unsigned long flags; - dma_cookie_t completed; struct list_head active_list; struct list_head queue; struct list_head free_list; diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index 59e7a965772..bc457878cff 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -122,7 +122,6 @@ struct ep93xx_dma_desc { * @lock: lock protecting the fields following * @flags: flags for the channel * @buffer: which buffer to use next (0/1) - * @last_completed: last completed cookie value * @active: flattened chain of descriptors currently being processed * @queue: pending descriptors which are handled next * @free_list: list of free descriptors which can be used @@ -157,7 +156,6 @@ struct ep93xx_dma_chan { #define EP93XX_DMA_IS_CYCLIC 0 int buffer; - dma_cookie_t last_completed; struct list_head active; struct list_head queue; struct list_head free_list; @@ -703,7 +701,7 @@ static void ep93xx_dma_tasklet(unsigned long data) desc = ep93xx_dma_get_active(edmac); if (desc) { if (desc->complete) { - edmac->last_completed = desc->txd.cookie; + edmac->chan.completed_cookie = desc->txd.cookie; list_splice_init(&edmac->active, &list); } callback = desc->txd.callback; @@ -861,7 +859,7 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) goto fail_clk_disable; spin_lock_irq(&edmac->lock); - edmac->last_completed = 1; + edmac->chan.completed_cookie = 1; edmac->chan.cookie = 1; ret = edmac->edma->hw_setup(edmac); spin_unlock_irq(&edmac->lock); @@ -1254,7 +1252,7 @@ static enum dma_status ep93xx_dma_tx_status(struct dma_chan *chan, spin_lock_irqsave(&edmac->lock, flags); last_used = chan->cookie; - last_completed = edmac->last_completed; + last_completed = chan->completed_cookie; spin_unlock_irqrestore(&edmac->lock, flags); ret = dma_async_is_complete(cookie, last_completed, last_used); diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index b98070c33ca..9b5cb8a43cf 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -990,7 +990,7 @@ static enum dma_status fsl_tx_status(struct dma_chan *dchan, spin_lock_irqsave(&chan->desc_lock, flags); - last_complete = chan->completed_cookie; + last_complete = dchan->completed_cookie; last_used = dchan->cookie; spin_unlock_irqrestore(&chan->desc_lock, flags); @@ -1088,7 +1088,7 @@ static void dma_do_tasklet(unsigned long data) desc = to_fsl_desc(chan->ld_running.prev); cookie = desc->async_tx.cookie; - chan->completed_cookie = cookie; + chan->common.completed_cookie = cookie; chan_dbg(chan, "completed_cookie=%d\n", cookie); } diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index 9cb5aa57c67..f5c38791fc7 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -137,7 +137,6 @@ struct fsldma_device { struct fsldma_chan { char name[8]; /* Channel name */ struct fsldma_chan_regs __iomem *regs; - dma_cookie_t completed_cookie; /* The maximum cookie completed */ spinlock_t desc_lock; /* Descriptor operation lock */ struct list_head ld_pending; /* Link descriptors queue */ struct list_head ld_running; /* Link descriptors queue */ diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 3296a7337f2..d3ddcba87f8 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -41,7 +41,6 @@ struct imxdma_channel { struct dma_chan chan; spinlock_t lock; struct dma_async_tx_descriptor desc; - dma_cookie_t last_completed; enum dma_status status; int dma_request; struct scatterlist *sg_list; @@ -65,7 +64,7 @@ static void imxdma_handle(struct imxdma_channel *imxdmac) { if (imxdmac->desc.callback) imxdmac->desc.callback(imxdmac->desc.callback_param); - imxdmac->last_completed = imxdmac->desc.cookie; + imxdmac->chan.completed_cookie = imxdmac->desc.cookie; } static void imxdma_irq_handler(int channel, void *data) @@ -158,8 +157,8 @@ static enum dma_status imxdma_tx_status(struct dma_chan *chan, last_used = chan->cookie; - ret = dma_async_is_complete(cookie, imxdmac->last_completed, last_used); - dma_set_tx_state(txstate, imxdmac->last_completed, last_used, 0); + ret = dma_async_is_complete(cookie, chan->completed_cookie, last_used); + dma_set_tx_state(txstate, chan->completed_cookie, last_used, 0); return ret; } diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index bf736ad679c..49aa4e87664 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -267,7 +267,6 @@ struct sdma_channel { struct dma_chan chan; spinlock_t lock; struct dma_async_tx_descriptor desc; - dma_cookie_t last_completed; enum dma_status status; unsigned int chn_count; unsigned int chn_real_count; @@ -529,7 +528,7 @@ static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac) else sdmac->status = DMA_SUCCESS; - sdmac->last_completed = sdmac->desc.cookie; + sdmac->chan.completed_cookie = sdmac->desc.cookie; if (sdmac->desc.callback) sdmac->desc.callback(sdmac->desc.callback_param); } @@ -1127,7 +1126,7 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan, last_used = chan->cookie; - dma_set_tx_state(txstate, sdmac->last_completed, last_used, + dma_set_tx_state(txstate, chan->completed_cookie, last_used, sdmac->chn_count - sdmac->chn_real_count); return sdmac->status; diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 923476d74a5..40e47e6c7ed 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -288,7 +288,7 @@ static void midc_descriptor_complete(struct intel_mid_dma_chan *midc, struct intel_mid_dma_lli *llitem; void *param_txd = NULL; - midc->completed = txd->cookie; + midc->chan.completed_cookie = txd->cookie; callback_txd = txd->callback; param_txd = txd->callback_param; @@ -482,12 +482,11 @@ static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan); dma_cookie_t last_used; dma_cookie_t last_complete; int ret; - last_complete = midc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -496,7 +495,7 @@ static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan, midc_scan_descriptors(to_middma_device(chan->device), midc); spin_unlock_bh(&midc->lock); - last_complete = midc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -886,7 +885,7 @@ static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan) pm_runtime_put(&mid->pdev->dev); return -EIO; } - midc->completed = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; spin_lock_bh(&midc->lock); while (midc->descs_allocated < DESCS_PER_CHANNEL) { diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h index c83d35b97bd..1bfa9268fea 100644 --- a/drivers/dma/intel_mid_dma_regs.h +++ b/drivers/dma/intel_mid_dma_regs.h @@ -165,7 +165,6 @@ union intel_mid_dma_cfg_hi { * @dma_base: MMIO register space DMA engine base pointer * @ch_id: DMA channel id * @lock: channel spinlock - * @completed: DMA cookie * @active_list: current active descriptors * @queue: current queued up descriptors * @free_list: current free descriptors @@ -183,7 +182,6 @@ struct intel_mid_dma_chan { void __iomem *dma_base; int ch_id; spinlock_t lock; - dma_cookie_t completed; struct list_head active_list; struct list_head queue; struct list_head free_list; diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index a4d6cb0c034..fab440af1f9 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -603,7 +603,7 @@ static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete) */ dump_desc_dbg(ioat, desc); if (tx->cookie) { - chan->completed_cookie = tx->cookie; + chan->common.completed_cookie = tx->cookie; tx->cookie = 0; ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw); ioat->active -= desc->hw->tx_cnt; diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 5216c8a92a2..9653b6b6a71 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -90,7 +90,6 @@ struct ioat_chan_common { void __iomem *reg_base; unsigned long last_completion; spinlock_t cleanup_lock; - dma_cookie_t completed_cookie; unsigned long state; #define IOAT_COMPLETION_PENDING 0 #define IOAT_COMPLETION_ACK 1 @@ -153,12 +152,11 @@ static inline enum dma_status ioat_tx_status(struct dma_chan *c, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct ioat_chan_common *chan = to_chan_common(c); dma_cookie_t last_used; dma_cookie_t last_complete; last_used = c->cookie; - last_complete = chan->completed_cookie; + last_complete = c->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 5d65f837797..d3f0aff2c02 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -147,7 +147,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) dump_desc_dbg(ioat, desc); if (tx->cookie) { ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw); - chan->completed_cookie = tx->cookie; + chan->common.completed_cookie = tx->cookie; tx->cookie = 0; if (tx->callback) { tx->callback(tx->callback_param); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index f519c93a61e..d4afac741e8 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -277,7 +277,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) dump_desc_dbg(ioat, desc); tx = &desc->txd; if (tx->cookie) { - chan->completed_cookie = tx->cookie; + chan->common.completed_cookie = tx->cookie; ioat3_dma_unmap(ioat, desc, idx + i); tx->cookie = 0; if (tx->callback) { diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 04be90b645b..d8027c2b42c 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -317,7 +317,7 @@ static void __iop_adma_slot_cleanup(struct iop_adma_chan *iop_chan) } if (cookie > 0) { - iop_chan->completed_cookie = cookie; + iop_chan->common.completed_cookie = cookie; pr_debug("\tcompleted cookie %d\n", cookie); } } @@ -909,7 +909,7 @@ static enum dma_status iop_adma_status(struct dma_chan *chan, enum dma_status ret; last_used = chan->cookie; - last_complete = iop_chan->completed_cookie; + last_complete = chan->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); ret = dma_async_is_complete(cookie, last_complete, last_used); if (ret == DMA_SUCCESS) @@ -918,7 +918,7 @@ static enum dma_status iop_adma_status(struct dma_chan *chan, iop_adma_slot_cleanup(iop_chan); last_used = chan->cookie; - last_complete = iop_chan->completed_cookie; + last_complete = chan->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); return dma_async_is_complete(cookie, last_complete, last_used); @@ -1650,7 +1650,7 @@ static void iop_chan_start_null_memcpy(struct iop_adma_chan *iop_chan) /* initialize the completed cookie to be less than * the most recently used cookie */ - iop_chan->completed_cookie = cookie - 1; + iop_chan->common.completed_cookie = cookie - 1; iop_chan->common.cookie = sw_desc->async_tx.cookie = cookie; /* channel should not be busy */ @@ -1707,7 +1707,7 @@ static void iop_chan_start_null_xor(struct iop_adma_chan *iop_chan) /* initialize the completed cookie to be less than * the most recently used cookie */ - iop_chan->completed_cookie = cookie - 1; + iop_chan->common.completed_cookie = cookie - 1; iop_chan->common.cookie = sw_desc->async_tx.cookie = cookie; /* channel should not be busy */ diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 6212b16e8cf..9149ade6a5d 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1295,7 +1295,7 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) /* Flip the active buffer - even if update above failed */ ichan->active_buffer = !ichan->active_buffer; if (done) - ichan->completed = desc->txd.cookie; + ichan->dma_chan.completed_cookie = desc->txd.cookie; callback = desc->txd.callback; callback_param = desc->txd.callback_param; @@ -1511,7 +1511,7 @@ static int idmac_alloc_chan_resources(struct dma_chan *chan) WARN_ON(ichan->status != IPU_CHANNEL_FREE); chan->cookie = 1; - ichan->completed = -ENXIO; + chan->completed_cookie = -ENXIO; ret = ipu_irq_map(chan->chan_id); if (ret < 0) @@ -1600,9 +1600,7 @@ static void idmac_free_chan_resources(struct dma_chan *chan) static enum dma_status idmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { - struct idmac_channel *ichan = to_idmac_chan(chan); - - dma_set_tx_state(txstate, ichan->completed, chan->cookie, 0); + dma_set_tx_state(txstate, chan->completed_cookie, chan->cookie, 0); if (cookie != chan->cookie) return DMA_ERROR; return DMA_SUCCESS; @@ -1638,11 +1636,11 @@ static int __init ipu_idmac_init(struct ipu *ipu) ichan->status = IPU_CHANNEL_FREE; ichan->sec_chan_en = false; - ichan->completed = -ENXIO; snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i); dma_chan->device = &idmac->dma; dma_chan->cookie = 1; + dma_chan->completed_cookie = -ENXIO; dma_chan->chan_id = i; list_add_tail(&dma_chan->device_node, &dma->channels); } diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 4d6d4cf6694..39a5cde9f42 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -188,7 +188,6 @@ struct mpc_dma_chan { struct list_head completed; struct mpc_dma_tcd *tcd; dma_addr_t tcd_paddr; - dma_cookie_t completed_cookie; /* Lock for this structure */ spinlock_t lock; @@ -365,7 +364,7 @@ static void mpc_dma_process_completed(struct mpc_dma *mdma) /* Free descriptors */ spin_lock_irqsave(&mchan->lock, flags); list_splice_tail_init(&list, &mchan->free); - mchan->completed_cookie = last_cookie; + mchan->chan.completed_cookie = last_cookie; spin_unlock_irqrestore(&mchan->lock, flags); } } @@ -568,7 +567,7 @@ mpc_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, spin_lock_irqsave(&mchan->lock, flags); last_used = mchan->chan.cookie; - last_complete = mchan->completed_cookie; + last_complete = mchan->chan.completed_cookie; spin_unlock_irqrestore(&mchan->lock, flags); dma_set_tx_state(txstate, last_complete, last_used, 0); @@ -742,7 +741,7 @@ static int __devinit mpc_dma_probe(struct platform_device *op) mchan->chan.device = dma; mchan->chan.cookie = 1; - mchan->completed_cookie = mchan->chan.cookie; + mchan->chan.completed_cookie = mchan->chan.cookie; INIT_LIST_HEAD(&mchan->free); INIT_LIST_HEAD(&mchan->prepared); diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index ad7d03fe4cb..c6a84dac112 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -435,7 +435,7 @@ static void __mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan) } if (cookie > 0) - mv_chan->completed_cookie = cookie; + mv_chan->common.completed_cookie = cookie; } static void @@ -825,7 +825,7 @@ static enum dma_status mv_xor_status(struct dma_chan *chan, enum dma_status ret; last_used = chan->cookie; - last_complete = mv_chan->completed_cookie; + last_complete = chan->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -836,7 +836,7 @@ static enum dma_status mv_xor_status(struct dma_chan *chan, mv_xor_slot_cleanup(mv_chan); last_used = chan->cookie; - last_complete = mv_chan->completed_cookie; + last_complete = chan->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); return dma_async_is_complete(cookie, last_complete, last_used); diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h index da04ac23def..654876b7ba1 100644 --- a/drivers/dma/mv_xor.h +++ b/drivers/dma/mv_xor.h @@ -78,7 +78,6 @@ struct mv_xor_device { /** * struct mv_xor_chan - internal representation of a XOR channel * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @lock: serializes enqueue/dequeue operations to the descriptors pool * @mmr_base: memory mapped register base * @idx: the index of the xor channel @@ -93,7 +92,6 @@ struct mv_xor_device { */ struct mv_xor_chan { int pending; - dma_cookie_t completed_cookie; spinlock_t lock; /* protects the descriptor slot pool */ void __iomem *mmr_base; unsigned int idx; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index b06cd4ca626..3696e6e4143 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -111,7 +111,6 @@ struct mxs_dma_chan { struct mxs_dma_ccw *ccw; dma_addr_t ccw_phys; int desc_count; - dma_cookie_t last_completed; enum dma_status status; unsigned int flags; #define MXS_DMA_SG_LOOP (1 << 0) @@ -274,7 +273,7 @@ static irqreturn_t mxs_dma_int_handler(int irq, void *dev_id) stat1 &= ~(1 << channel); if (mxs_chan->status == DMA_SUCCESS) - mxs_chan->last_completed = mxs_chan->desc.cookie; + mxs_chan->chan.completed_cookie = mxs_chan->desc.cookie; /* schedule tasklet on this channel */ tasklet_schedule(&mxs_chan->tasklet); @@ -538,7 +537,7 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan, dma_cookie_t last_used; last_used = chan->cookie; - dma_set_tx_state(txstate, mxs_chan->last_completed, last_used, 0); + dma_set_tx_state(txstate, chan->completed_cookie, last_used, 0); return mxs_chan->status; } diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 823f58179f9..79a71858497 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -105,7 +105,6 @@ struct pch_dma_chan { spinlock_t lock; - dma_cookie_t completed_cookie; struct list_head active_list; struct list_head queue; struct list_head free_list; @@ -544,7 +543,7 @@ static int pd_alloc_chan_resources(struct dma_chan *chan) spin_lock_irq(&pd_chan->lock); list_splice(&tmp_list, &pd_chan->free_list); pd_chan->descs_allocated = i; - pd_chan->completed_cookie = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; spin_unlock_irq(&pd_chan->lock); pdc_enable_irq(chan, 1); @@ -583,7 +582,7 @@ static enum dma_status pd_tx_status(struct dma_chan *chan, dma_cookie_t cookie, int ret; spin_lock_irq(&pd_chan->lock); - last_completed = pd_chan->completed_cookie; + last_completed = chan->completed_cookie; last_used = chan->cookie; spin_unlock_irq(&pd_chan->lock); diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 84ebea9bc53..99c31a76e74 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -51,9 +51,6 @@ struct dma_pl330_chan { /* DMA-Engine Channel */ struct dma_chan chan; - /* Last completed cookie */ - dma_cookie_t completed; - /* List of to be xfered descriptors */ struct list_head work_list; @@ -234,7 +231,7 @@ static void pl330_tasklet(unsigned long data) /* Pick up ripe tomatoes */ list_for_each_entry_safe(desc, _dt, &pch->work_list, node) if (desc->status == DONE) { - pch->completed = desc->txd.cookie; + pch->chan.completed_cookie = desc->txd.cookie; list_move_tail(&desc->node, &list); } @@ -305,7 +302,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&pch->lock, flags); - pch->completed = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; pch->cyclic = false; pch->pl330_chid = pl330_request_channel(&pdmac->pif); @@ -400,7 +397,7 @@ pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie, dma_cookie_t last_done, last_used; int ret; - last_done = pch->completed; + last_done = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_done, last_used); diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c index fc457a7e883..f878322ecbc 100644 --- a/drivers/dma/ppc4xx/adma.c +++ b/drivers/dma/ppc4xx/adma.c @@ -1930,7 +1930,7 @@ static void __ppc440spe_adma_slot_cleanup(struct ppc440spe_adma_chan *chan) if (end_of_chain && slot_cnt) { /* Should wait for ZeroSum completion */ if (cookie > 0) - chan->completed_cookie = cookie; + chan->common.completed_cookie = cookie; return; } @@ -1960,7 +1960,7 @@ static void __ppc440spe_adma_slot_cleanup(struct ppc440spe_adma_chan *chan) BUG_ON(!seen_current); if (cookie > 0) { - chan->completed_cookie = cookie; + chan->common.completed_cookie = cookie; pr_debug("\tcompleted cookie %d\n", cookie); } @@ -3950,7 +3950,7 @@ static enum dma_status ppc440spe_adma_tx_status(struct dma_chan *chan, ppc440spe_chan = to_ppc440spe_adma_chan(chan); last_used = chan->cookie; - last_complete = ppc440spe_chan->completed_cookie; + last_complete = chan->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); @@ -3961,7 +3961,7 @@ static enum dma_status ppc440spe_adma_tx_status(struct dma_chan *chan, ppc440spe_adma_slot_cleanup(ppc440spe_chan); last_used = chan->cookie; - last_complete = ppc440spe_chan->completed_cookie; + last_complete = chan->completed_cookie; dma_set_tx_state(txstate, last_complete, last_used, 0); @@ -4058,7 +4058,7 @@ static void ppc440spe_chan_start_null_xor(struct ppc440spe_adma_chan *chan) /* initialize the completed cookie to be less than * the most recently used cookie */ - chan->completed_cookie = cookie - 1; + chan->common.completed_cookie = cookie - 1; chan->common.cookie = sw_desc->async_tx.cookie = cookie; /* channel should not be busy */ diff --git a/drivers/dma/ppc4xx/adma.h b/drivers/dma/ppc4xx/adma.h index 8ada5a812e3..26b7a5ed9ac 100644 --- a/drivers/dma/ppc4xx/adma.h +++ b/drivers/dma/ppc4xx/adma.h @@ -81,7 +81,6 @@ struct ppc440spe_adma_device { * @common: common dmaengine channel object members * @all_slots: complete domain of slots usable by the channel * @pending: allows batching of hardware operations - * @completed_cookie: identifier for the most recently completed operation * @slots_allocated: records the actual size of the descriptor slot pool * @hw_chain_inited: h/w descriptor chain initialization flag * @irq_tasklet: bottom half where ppc440spe_adma_slot_cleanup runs @@ -99,7 +98,6 @@ struct ppc440spe_adma_chan { struct list_head all_slots; struct ppc440spe_adma_desc_slot *last_used; int pending; - dma_cookie_t completed_cookie; int slots_allocated; int hw_chain_inited; struct tasklet_struct irq_tasklet; diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 812fd76e9c1..ae84c12e386 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -764,12 +764,12 @@ static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all cookie = tx->cookie; if (desc->mark == DESC_COMPLETED && desc->chunks == 1) { - if (sh_chan->completed_cookie != desc->cookie - 1) + if (sh_chan->common.completed_cookie != desc->cookie - 1) dev_dbg(sh_chan->dev, "Completing cookie %d, expected %d\n", desc->cookie, - sh_chan->completed_cookie + 1); - sh_chan->completed_cookie = desc->cookie; + sh_chan->common.completed_cookie + 1); + sh_chan->common.completed_cookie = desc->cookie; } /* Call callback on the last chunk */ @@ -823,7 +823,7 @@ static dma_async_tx_callback __ld_cleanup(struct sh_dmae_chan *sh_chan, bool all * Terminating and the loop completed normally: forgive * uncompleted cookies */ - sh_chan->completed_cookie = sh_chan->common.cookie; + sh_chan->common.completed_cookie = sh_chan->common.cookie; spin_unlock_irqrestore(&sh_chan->desc_lock, flags); @@ -891,7 +891,7 @@ static enum dma_status sh_dmae_tx_status(struct dma_chan *chan, sh_dmae_chan_ld_cleanup(sh_chan, false); /* First read completed cookie to avoid a skew */ - last_complete = sh_chan->completed_cookie; + last_complete = chan->completed_cookie; rmb(); last_used = chan->cookie; BUG_ON(last_complete < 0); diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h index 2b55a276dc5..0b1d2c105f0 100644 --- a/drivers/dma/shdma.h +++ b/drivers/dma/shdma.h @@ -30,7 +30,6 @@ enum dmae_pm_state { }; struct sh_dmae_chan { - dma_cookie_t completed_cookie; /* The maximum cookie completed */ spinlock_t desc_lock; /* Descriptor operation lock */ struct list_head ld_queue; /* Link descriptors queue */ struct list_head ld_free; /* Link descriptors free */ diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 2333810d168..60473f00cf1 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -59,7 +59,6 @@ struct sirfsoc_dma_chan { struct list_head queued; struct list_head active; struct list_head completed; - dma_cookie_t completed_cookie; unsigned long happened_cyclic; unsigned long completed_cyclic; @@ -208,7 +207,7 @@ static void sirfsoc_dma_process_completed(struct sirfsoc_dma *sdma) /* Free descriptors */ spin_lock_irqsave(&schan->lock, flags); list_splice_tail_init(&list, &schan->free); - schan->completed_cookie = last_cookie; + schan->chan.completed_cookie = last_cookie; spin_unlock_irqrestore(&schan->lock, flags); } else { /* for cyclic channel, desc is always in active list */ @@ -419,7 +418,7 @@ sirfsoc_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, spin_lock_irqsave(&schan->lock, flags); last_used = schan->chan.cookie; - last_complete = schan->completed_cookie; + last_complete = schan->chan.completed_cookie; spin_unlock_irqrestore(&schan->lock, flags); dma_set_tx_state(txstate, last_complete, last_used, 0); @@ -636,7 +635,7 @@ static int __devinit sirfsoc_dma_probe(struct platform_device *op) schan->chan.device = dma; schan->chan.cookie = 1; - schan->completed_cookie = schan->chan.cookie; + schan->chan.completed_cookie = schan->chan.cookie; INIT_LIST_HEAD(&schan->free); INIT_LIST_HEAD(&schan->prepared); diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index cc5ecbc067a..cfca2a06d1a 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -220,8 +220,6 @@ struct d40_base; * * @lock: A spinlock to protect this struct. * @log_num: The logical number, if any of this channel. - * @completed: Starts with 1, after first interrupt it is set to dma engine's - * current cookie. * @pending_tx: The number of pending transfers. Used between interrupt handler * and tasklet. * @busy: Set to true when transfer is ongoing on this channel. @@ -250,8 +248,6 @@ struct d40_base; struct d40_chan { spinlock_t lock; int log_num; - /* ID of the most recent completed transfer */ - int completed; int pending_tx; bool busy; struct d40_phy_res *phy_chan; @@ -1357,7 +1353,7 @@ static void dma_tasklet(unsigned long data) goto err; if (!d40d->cyclic) - d40c->completed = d40d->txd.cookie; + d40c->chan.completed_cookie = d40d->txd.cookie; /* * If terminating a channel pending_tx is set to zero. @@ -2182,7 +2178,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) bool is_free_phy; spin_lock_irqsave(&d40c->lock, flags); - d40c->completed = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; /* If no dma configuration is set use default configuration (memcpy) */ if (!d40c->configured) { @@ -2351,7 +2347,7 @@ static enum dma_status d40_tx_status(struct dma_chan *chan, return -EINVAL; } - last_complete = d40c->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; if (d40_is_paused(d40c)) diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c index a6f9c1684a0..a1d15598cf7 100644 --- a/drivers/dma/timb_dma.c +++ b/drivers/dma/timb_dma.c @@ -84,7 +84,6 @@ struct timb_dma_chan { especially the lists and descriptors, from races between the tasklet and calls from above */ - dma_cookie_t last_completed_cookie; bool ongoing; struct list_head active_list; struct list_head queue; @@ -284,7 +283,7 @@ static void __td_finish(struct timb_dma_chan *td_chan) else iowrite32(0, td_chan->membase + TIMBDMA_OFFS_TX_DLAR); */ - td_chan->last_completed_cookie = txd->cookie; + td_chan->chan.completed_cookie = txd->cookie; td_chan->ongoing = false; callback = txd->callback; @@ -481,7 +480,7 @@ static int td_alloc_chan_resources(struct dma_chan *chan) } spin_lock_bh(&td_chan->lock); - td_chan->last_completed_cookie = 1; + chan->completed_cookie = 1; chan->cookie = 1; spin_unlock_bh(&td_chan->lock); @@ -523,7 +522,7 @@ static enum dma_status td_tx_status(struct dma_chan *chan, dma_cookie_t cookie, dev_dbg(chan2dev(chan), "%s: Entry\n", __func__); - last_complete = td_chan->last_completed_cookie; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index 6122c364cf1..a917b6723ba 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -424,7 +424,7 @@ txx9dmac_descriptor_complete(struct txx9dmac_chan *dc, dev_vdbg(chan2dev(&dc->chan), "descriptor %u %p complete\n", txd->cookie, desc); - dc->completed = txd->cookie; + dc->chan.completed_cookie = txd->cookie; callback = txd->callback; param = txd->callback_param; @@ -976,7 +976,7 @@ txx9dmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, dma_cookie_t last_complete; int ret; - last_complete = dc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -985,7 +985,7 @@ txx9dmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie, txx9dmac_scan_descriptors(dc); spin_unlock_bh(&dc->lock); - last_complete = dc->completed; + last_complete = chan->completed_cookie; last_used = chan->cookie; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -1057,7 +1057,7 @@ static int txx9dmac_alloc_chan_resources(struct dma_chan *chan) return -EIO; } - dc->completed = chan->cookie = 1; + chan->completed_cookie = chan->cookie = 1; dc->ccr = TXX9_DMA_CCR_IMMCHN | TXX9_DMA_CCR_INTENE | CCR_LE; txx9dmac_chan_set_SMPCHN(dc); @@ -1186,7 +1186,7 @@ static int __init txx9dmac_chan_probe(struct platform_device *pdev) dc->ddev->chan[ch] = dc; dc->chan.device = &dc->dma; list_add_tail(&dc->chan.device_node, &dc->chan.device->channels); - dc->chan.cookie = dc->completed = 1; + dc->chan.cookie = dc->chan.completed_cookie = 1; if (is_dmac64(dc)) dc->ch_regs = &__txx9dmac_regs(dc->ddev)->CHAN[ch]; diff --git a/drivers/dma/txx9dmac.h b/drivers/dma/txx9dmac.h index 365d42366b9..f5a76059888 100644 --- a/drivers/dma/txx9dmac.h +++ b/drivers/dma/txx9dmac.h @@ -172,7 +172,6 @@ struct txx9dmac_chan { spinlock_t lock; /* these other elements are all protected by lock */ - dma_cookie_t completed; struct list_head active_list; struct list_head queue; struct list_head free_list; diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 2c58853ca42..e64ce2cfee9 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -172,7 +172,6 @@ enum pl08x_dma_chan_state { * @runtime_addr: address for RX/TX according to the runtime config * @runtime_direction: current direction of this channel according to * runtime config - * @lc: last completed transaction on this channel * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel * @lock: a lock for this channel data @@ -197,7 +196,6 @@ struct pl08x_dma_chan { u32 src_cctl; u32 dst_cctl; enum dma_transfer_direction runtime_direction; - dma_cookie_t lc; struct list_head pend_list; struct pl08x_txd *at; spinlock_t lock; diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 7e640bf27d2..c59c4f0c2cc 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -258,6 +258,7 @@ struct dma_chan_percpu { * struct dma_chan - devices supply DMA channels, clients use them * @device: ptr to the dma device who supplies this channel, always !%NULL * @cookie: last cookie value returned to client + * @completed_cookie: last completed cookie for this channel * @chan_id: channel ID for sysfs * @dev: class device for sysfs * @device_node: used to add this to the device chan list @@ -269,6 +270,7 @@ struct dma_chan_percpu { struct dma_chan { struct dma_device *device; dma_cookie_t cookie; + dma_cookie_t completed_cookie; /* sysfs */ int chan_id; -- cgit v1.2.3-70-g09d2 From d2ebfb335b0426deb1a4fb14e4e926d81ecd8235 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 6 Mar 2012 22:34:26 +0000 Subject: dmaengine: add private header file Add a local private header file to contain definitions and declarations which should only be used by DMA engine drivers. We also fix linux/dmaengine.h to use LINUX_DMAENGINE_H to guard against multiple inclusion. Signed-off-by: Russell King Tested-by: Linus Walleij Reviewed-by: Linus Walleij Acked-by: Jassi Brar [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 2 ++ drivers/dma/at_hdmac.c | 1 + drivers/dma/coh901318.c | 1 + drivers/dma/dmaengine.h | 10 ++++++++++ drivers/dma/dw_dmac.c | 1 + drivers/dma/ep93xx_dma.c | 2 ++ drivers/dma/fsldma.c | 1 + drivers/dma/imx-dma.c | 2 ++ drivers/dma/imx-sdma.c | 2 ++ drivers/dma/intel_mid_dma.c | 2 ++ drivers/dma/ioat/dma.c | 2 ++ drivers/dma/ioat/dma_v2.c | 2 ++ drivers/dma/iop-adma.c | 2 ++ drivers/dma/ipu/ipu_idmac.c | 1 + drivers/dma/mpc512x_dma.c | 2 ++ drivers/dma/mv_xor.c | 2 ++ drivers/dma/mxs-dma.c | 2 ++ drivers/dma/pch_dma.c | 2 ++ drivers/dma/pl330.c | 2 ++ drivers/dma/ppc4xx/adma.c | 1 + drivers/dma/shdma.c | 2 ++ drivers/dma/ste_dma40.c | 1 + drivers/dma/timb_dma.c | 2 ++ drivers/dma/txx9dmac.c | 2 ++ include/linux/dmaengine.h | 4 ++-- 25 files changed, 51 insertions(+), 2 deletions(-) create mode 100644 drivers/dma/dmaengine.h (limited to 'include/linux') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index e510447a685..45f5e66e1c8 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -85,6 +85,8 @@ #include #include +#include "dmaengine.h" + #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6baf5d71726..ce26ba38114 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -27,6 +27,7 @@ #include #include "at_hdmac_regs.h" +#include "dmaengine.h" /* * Glossary diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 521434bc313..fb0d1245ade 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -24,6 +24,7 @@ #include #include "coh901318_lli.h" +#include "dmaengine.h" #define COHC_2_DEV(cohc) (&cohc->chan.dev->device) diff --git a/drivers/dma/dmaengine.h b/drivers/dma/dmaengine.h new file mode 100644 index 00000000000..968570dde2e --- /dev/null +++ b/drivers/dma/dmaengine.h @@ -0,0 +1,10 @@ +/* + * The contents of this file are private to DMA engine drivers, and is not + * part of the API to be used by DMA engine users. + */ +#ifndef DMAENGINE_H +#define DMAENGINE_H + +#include + +#endif diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 5bd23006ff4..b279e192072 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -23,6 +23,7 @@ #include #include "dw_dmac_regs.h" +#include "dmaengine.h" /* * This supports the Synopsys "DesignWare AHB Central DMA Controller", diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index bc457878cff..326019832a1 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -28,6 +28,8 @@ #include +#include "dmaengine.h" + /* M2P registers */ #define M2P_CONTROL 0x0000 #define M2P_CONTROL_STALLINT BIT(0) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 9b5cb8a43cf..2ebbe572f9e 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -35,6 +35,7 @@ #include #include +#include "dmaengine.h" #include "fsldma.h" #define chan_dbg(chan, fmt, arg...) \ diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index d3ddcba87f8..cead5e4bd38 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -30,6 +30,8 @@ #include #include +#include "dmaengine.h" + struct imxdma_channel { struct imxdma_engine *imxdma; unsigned int channel; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 49aa4e87664..48a791f93ad 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -43,6 +43,8 @@ #include #include +#include "dmaengine.h" + /* SDMA registers */ #define SDMA_H_C0PTR 0x000 #define SDMA_H_INTR 0x004 diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 40e47e6c7ed..55d0451670b 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -29,6 +29,8 @@ #include #include +#include "dmaengine.h" + #define MAX_CHAN 4 /*max ch across controllers*/ #include "intel_mid_dma_regs.h" diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index fab440af1f9..dfe411b2014 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -40,6 +40,8 @@ #include "registers.h" #include "hw.h" +#include "../dmaengine.h" + int ioat_pending_level = 4; module_param(ioat_pending_level, int, 0644); MODULE_PARM_DESC(ioat_pending_level, diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index d3f0aff2c02..6c1e6754d9b 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -41,6 +41,8 @@ #include "registers.h" #include "hw.h" +#include "../dmaengine.h" + int ioat_ring_alloc_order = 8; module_param(ioat_ring_alloc_order, int, 0644); MODULE_PARM_DESC(ioat_ring_alloc_order, diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index d8027c2b42c..650bf1e185e 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -36,6 +36,8 @@ #include +#include "dmaengine.h" + #define to_iop_adma_chan(chan) container_of(chan, struct iop_adma_chan, common) #define to_iop_adma_device(dev) \ container_of(dev, struct iop_adma_device, common) diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 9149ade6a5d..0fcff6508fb 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -25,6 +25,7 @@ #include +#include "../dmaengine.h" #include "ipu_intern.h" #define FS_VF_IN_VALID 0x00000002 diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 39a5cde9f42..c56b3fe5d3f 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -44,6 +44,8 @@ #include +#include "dmaengine.h" + /* Number of DMA Transfer descriptors allocated per channel */ #define MPC_DMA_DESCRIPTORS 64 diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index c6a84dac112..ee61778ba8a 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -26,6 +26,8 @@ #include #include #include + +#include "dmaengine.h" #include "mv_xor.h" static void mv_xor_issue_pending(struct dma_chan *chan); diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 3696e6e4143..daa84ee2a18 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -28,6 +28,8 @@ #include #include +#include "dmaengine.h" + /* * NOTE: The term "PIO" throughout the mxs-dma implementation means * PIO mode of mxs apbh-dma and apbx-dma. With this working mode, diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 79a71858497..2b3479d850c 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -25,6 +25,8 @@ #include #include +#include "dmaengine.h" + #define DRV_NAME "pch-dma" #define DMA_CTL0_DISABLE 0x0 diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 99c31a76e74..2db70748403 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -21,6 +21,8 @@ #include #include +#include "dmaengine.h" + #define NR_DEFAULT_DESC 16 enum desc_status { diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c index f878322ecbc..40082ec8326 100644 --- a/drivers/dma/ppc4xx/adma.c +++ b/drivers/dma/ppc4xx/adma.c @@ -46,6 +46,7 @@ #include #include #include "adma.h" +#include "../dmaengine.h" enum ppc_adma_init_code { PPC_ADMA_INIT_OK = 0, diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index ae84c12e386..c2914330b8f 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -30,6 +30,8 @@ #include #include #include + +#include "dmaengine.h" #include "shdma.h" /* DMA descriptor control */ diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index cfca2a06d1a..156b98f661a 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -21,6 +21,7 @@ #include +#include "dmaengine.h" #include "ste_dma40_ll.h" #define D40_NAME "dma40" diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c index a1d15598cf7..4b61879284d 100644 --- a/drivers/dma/timb_dma.c +++ b/drivers/dma/timb_dma.c @@ -31,6 +31,8 @@ #include +#include "dmaengine.h" + #define DRIVER_NAME "timb-dma" /* Global DMA registers */ diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index a917b6723ba..db6d809d4d0 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -15,6 +15,8 @@ #include #include #include + +#include "dmaengine.h" #include "txx9dmac.h" static struct txx9dmac_chan *to_txx9dmac_chan(struct dma_chan *chan) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c59c4f0c2cc..715babf4bff 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -18,8 +18,8 @@ * The full GNU General Public License is included in this distribution in the * file called COPYING. */ -#ifndef DMAENGINE_H -#define DMAENGINE_H +#ifndef LINUX_DMAENGINE_H +#define LINUX_DMAENGINE_H #include #include -- cgit v1.2.3-70-g09d2 From 09f98a825a821f7a3f1b162f9ed023f37213a63b Mon Sep 17 00:00:00 2001 From: Tang Liang Date: Fri, 9 Dec 2011 10:05:54 +0800 Subject: x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep. The ACPI suspend path makes a call to tboot_sleep right before it writes the PM1A, PM1B values. We replace the direct call to tboot via an registration callback similar to __acpi_register_gsi. CC: Len Brown Acked-by: Joseph Cihula Acked-by: Rafael J. Wysocki [v1: Added __attribute__ ((unused))] [v2: Introduced a wrapper instead of changing tboot_sleep return values] [v3: Added return value AE_CTRL_SKIP for acpi_os_sleep_prepare] Signed-off-by: Tang Liang [v1: Fix compile issues on IA64 and PPC64] [v2: Fix where __acpi_os_prepare_sleep==NULL and did not go in sleep properly] Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/kernel/tboot.c | 8 ++++++++ drivers/acpi/acpica/hwsleep.c | 10 +++++++--- drivers/acpi/osl.c | 24 ++++++++++++++++++++++++ include/acpi/acexcep.h | 1 + include/linux/acpi.h | 10 ++++++++++ include/linux/tboot.h | 1 - 6 files changed, 50 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index e2410e27f97..1a4ab7df5b6 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -297,6 +297,12 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control) tboot_shutdown(acpi_shutdown_map[sleep_state]); } +static int tboot_sleep_wrapper(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ + tboot_sleep(sleep_state, pm1a_control, pm1b_control); + return 0; +} static atomic_t ap_wfs_count; @@ -345,6 +351,8 @@ static __init int tboot_late_init(void) atomic_set(&ap_wfs_count, 0); register_hotcpu_notifier(&tboot_cpu_notifier); + + acpi_os_set_prepare_sleep(&tboot_sleep_wrapper); return 0; } diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index d52da307365..992359af7e2 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -43,9 +43,9 @@ */ #include +#include #include "accommon.h" #include "actables.h" -#include #include #define _COMPONENT ACPI_HARDWARE @@ -344,8 +344,12 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) ACPI_FLUSH_CPU_CACHE(); - tboot_sleep(sleep_state, pm1a_control, pm1b_control); - + status = acpi_os_prepare_sleep(sleep_state, pm1a_control, + pm1b_control); + if (ACPI_SKIP(status)) + return_ACPI_STATUS(AE_OK); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); /* Write #2: Write both SLP_TYP + SLP_EN */ status = acpi_hw_write_pm1_control(pm1a_control, pm1b_control); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index f31c5c5f1b7..f3aae4ba507 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -76,6 +76,9 @@ EXPORT_SYMBOL(acpi_in_debugger); extern char line_buf[80]; #endif /*ENABLE_DEBUGGER */ +static int (*__acpi_os_prepare_sleep)(u8 sleep_state, u32 pm1a_ctrl, + u32 pm1b_ctrl); + static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; @@ -1659,3 +1662,24 @@ acpi_status acpi_os_terminate(void) return AE_OK; } + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control, + u32 pm1b_control) +{ + int rc = 0; + if (__acpi_os_prepare_sleep) + rc = __acpi_os_prepare_sleep(sleep_state, + pm1a_control, pm1b_control); + if (rc < 0) + return AE_ERROR; + else if (rc > 0) + return AE_CTRL_SKIP; + + return AE_OK; +} + +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)) +{ + __acpi_os_prepare_sleep = func; +} diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 5b6c391efc8..fa0d22ce089 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -57,6 +57,7 @@ #define ACPI_SUCCESS(a) (!(a)) #define ACPI_FAILURE(a) (a) +#define ACPI_SKIP(a) (a == AE_CTRL_SKIP) #define AE_OK (acpi_status) 0x0000 /* diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6001b4da39d..fccd017b8b6 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -359,4 +359,14 @@ static inline int suspend_nvs_register(unsigned long a, unsigned long b) } #endif +#ifdef CONFIG_ACPI +void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, + u32 pm1a_ctrl, u32 pm1b_ctrl)); + +acpi_status acpi_os_prepare_sleep(u8 sleep_state, + u32 pm1a_control, u32 pm1b_control); +#else +#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0) +#endif + #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/tboot.h b/include/linux/tboot.h index 1dba6ee5520..c75128bed5f 100644 --- a/include/linux/tboot.h +++ b/include/linux/tboot.h @@ -143,7 +143,6 @@ static inline int tboot_enabled(void) extern void tboot_probe(void); extern void tboot_shutdown(u32 shutdown_type); -extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); extern struct acpi_table_header *tboot_get_dmar_table( struct acpi_table_header *dmar_tbl); extern int tboot_force_iommu(void); -- cgit v1.2.3-70-g09d2 From f42c2b45b139b7b21c0c2eca70c82ce8d4104815 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 24 Jan 2012 09:26:04 -0800 Subject: max17042: Align register definitions with data sheet and init appnote align the register names with max17042 data sheet removing registers that are marked reserved that are not used. Add register definitions defined in the maxim initialization appnote Signed-off-by: Dirk Brandewie Acked-by: MyungJoo Ham Signed-off-by: Anton Vorontsov --- include/linux/power/max17042_battery.h | 37 +++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index fe99211fb2b..67eeada7107 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -40,11 +40,11 @@ enum max17042_register { MAX17042_VCELL = 0x09, MAX17042_Current = 0x0A, MAX17042_AvgCurrent = 0x0B, - MAX17042_Qresidual = 0x0C, + MAX17042_SOC = 0x0D, MAX17042_AvSOC = 0x0E, MAX17042_RemCap = 0x0F, - MAX17402_FullCAP = 0x10, + MAX17042_FullCAP = 0x10, MAX17042_TTE = 0x11, MAX17042_V_empty = 0x12, @@ -62,14 +62,14 @@ enum max17042_register { MAX17042_AvCap = 0x1F, MAX17042_ManName = 0x20, MAX17042_DevName = 0x21, - MAX17042_DevChem = 0x22, + MAX17042_FullCAPNom = 0x23, MAX17042_TempNom = 0x24, - MAX17042_TempCold = 0x25, + MAX17042_TempLim = 0x25, MAX17042_TempHot = 0x26, MAX17042_AIN = 0x27, MAX17042_LearnCFG = 0x28, - MAX17042_SHFTCFG = 0x29, + MAX17042_FilterCFG = 0x29, MAX17042_RelaxCFG = 0x2A, MAX17042_MiscCFG = 0x2B, MAX17042_TGAIN = 0x2C, @@ -77,22 +77,41 @@ enum max17042_register { MAX17042_CGAIN = 0x2E, MAX17042_COFF = 0x2F, - MAX17042_Q_empty = 0x33, + MAX17042_MaskSOC = 0x32, + MAX17042_SOC_empty = 0x33, MAX17042_T_empty = 0x34, + MAX17042_FullCAP0 = 0x35, + MAX17042_LAvg_empty = 0x36, + MAX17042_FCTC = 0x37, MAX17042_RCOMP0 = 0x38, MAX17042_TempCo = 0x39, - MAX17042_Rx = 0x3A, - MAX17042_T_empty0 = 0x3B, + MAX17042_EmptyTempCo = 0x3A, + MAX17042_K_empty0 = 0x3B, MAX17042_TaskPeriod = 0x3C, MAX17042_FSTAT = 0x3D, MAX17042_SHDNTIMER = 0x3F, - MAX17042_VFRemCap = 0x4A, + MAX17042_dQacc = 0x45, + MAX17042_dPacc = 0x46, + + MAX17042_VFSOC0 = 0x48, MAX17042_QH = 0x4D, MAX17042_QL = 0x4E, + + MAX17042_VFSOC0Enable = 0x60, + MAX17042_MLOCKReg1 = 0x62, + MAX17042_MLOCKReg2 = 0x63, + + MAX17042_MODELChrTbl = 0x80, + + MAX17042_OCV = 0xEE, + + MAX17042_OCVInternal = 0xFB, + + MAX17042_VFSOC = 0xFF, }; /* -- cgit v1.2.3-70-g09d2 From 24bcc89c7e7c64982e6192b4952a0a92379fc341 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 13 Mar 2012 15:41:04 -0400 Subject: jbd2: split updating of journal superblock and marking journal empty There are three case of updating journal superblock. In the first case, we want to mark journal as empty (setting s_sequence to 0), in the second case we want to update log tail, in the third case we want to update s_errno. Split these cases into separate functions. It makes the code slightly more straightforward and later patches will make the distinction even more important. Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/jbd2/checkpoint.c | 2 +- fs/jbd2/commit.c | 2 +- fs/jbd2/journal.c | 163 ++++++++++++++++++++++++++------------------ include/linux/jbd2.h | 2 +- include/trace/events/jbd2.h | 12 ++-- 5 files changed, 102 insertions(+), 79 deletions(-) (limited to 'include/linux') diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 253e91890e7..19dcd0b86bc 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -550,7 +550,7 @@ int jbd2_cleanup_journal_tail(journal_t *journal) (journal->j_flags & JBD2_BARRIER)) blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); if (!(journal->j_flags & JBD2_ABORT)) - jbd2_journal_update_superblock(journal, 1); + jbd2_journal_update_sb_log_tail(journal); return 0; } diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 8adc5d460f5..19371a8a901 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -340,7 +340,7 @@ void jbd2_journal_commit_transaction(journal_t *journal) /* Do we need to erase the effects of a prior jbd2_journal_flush? */ if (journal->j_flags & JBD2_FLUSHED) { jbd_debug(3, "super block updated\n"); - jbd2_journal_update_superblock(journal, 1); + jbd2_journal_update_sb_log_tail(journal); } else { jbd_debug(3, "superblock not updated\n"); } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index cfb36d99f7a..6e75fbd75ba 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1110,40 +1110,30 @@ static int journal_reset(journal_t *journal) journal->j_max_transaction_buffers = journal->j_maxlen / 4; - /* Add the dynamic fields and write it to disk. */ - jbd2_journal_update_superblock(journal, 1); - return jbd2_journal_start_thread(journal); -} - -/** - * void jbd2_journal_update_superblock() - Update journal sb on disk. - * @journal: The journal to update. - * @wait: Set to '0' if you don't want to wait for IO completion. - * - * Update a journal's dynamic superblock fields and write it to disk, - * optionally waiting for the IO to complete. - */ -void jbd2_journal_update_superblock(journal_t *journal, int wait) -{ - journal_superblock_t *sb = journal->j_superblock; - struct buffer_head *bh = journal->j_sb_buffer; - /* * As a special case, if the on-disk copy is already marked as needing - * no recovery (s_start == 0) and there are no outstanding transactions - * in the filesystem, then we can safely defer the superblock update - * until the next commit by setting JBD2_FLUSHED. This avoids + * no recovery (s_start == 0), then we can safely defer the superblock + * update until the next commit by setting JBD2_FLUSHED. This avoids * attempting a write to a potential-readonly device. */ - if (sb->s_start == 0 && journal->j_tail_sequence == - journal->j_transaction_sequence) { + if (sb->s_start == 0) { jbd_debug(1, "JBD2: Skipping superblock update on recovered sb " "(start %ld, seq %d, errno %d)\n", journal->j_tail, journal->j_tail_sequence, journal->j_errno); - goto out; + journal->j_flags |= JBD2_FLUSHED; + } else { + /* Add the dynamic fields and write it to disk. */ + jbd2_journal_update_sb_log_tail(journal); } + return jbd2_journal_start_thread(journal); +} +static void jbd2_write_superblock(journal_t *journal) +{ + struct buffer_head *bh = journal->j_sb_buffer; + + trace_jbd2_write_superblock(journal); if (buffer_write_io_error(bh)) { /* * Oh, dear. A previous attempt to write the journal @@ -1160,49 +1150,98 @@ void jbd2_journal_update_superblock(journal_t *journal, int wait) set_buffer_uptodate(bh); } + BUFFER_TRACE(bh, "marking dirty"); + mark_buffer_dirty(bh); + sync_dirty_buffer(bh); + if (buffer_write_io_error(bh)) { + printk(KERN_ERR "JBD2: I/O error detected " + "when updating journal superblock for %s.\n", + journal->j_devname); + clear_buffer_write_io_error(bh); + set_buffer_uptodate(bh); + } +} + +/** + * jbd2_journal_update_sb_log_tail() - Update log tail in journal sb on disk. + * @journal: The journal to update. + * + * Update a journal's superblock information about log tail and write it to + * disk, waiting for the IO to complete. + */ +void jbd2_journal_update_sb_log_tail(journal_t *journal) +{ + journal_superblock_t *sb = journal->j_superblock; + read_lock(&journal->j_state_lock); - jbd_debug(1, "JBD2: updating superblock (start %ld, seq %d, errno %d)\n", - journal->j_tail, journal->j_tail_sequence, journal->j_errno); + jbd_debug(1, "JBD2: updating superblock (start %ld, seq %d)\n", + journal->j_tail, journal->j_tail_sequence); sb->s_sequence = cpu_to_be32(journal->j_tail_sequence); sb->s_start = cpu_to_be32(journal->j_tail); - sb->s_errno = cpu_to_be32(journal->j_errno); read_unlock(&journal->j_state_lock); - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - if (wait) { - sync_dirty_buffer(bh); - if (buffer_write_io_error(bh)) { - printk(KERN_ERR "JBD2: I/O error detected " - "when updating journal superblock for %s.\n", - journal->j_devname); - clear_buffer_write_io_error(bh); - set_buffer_uptodate(bh); - } - } else - write_dirty_buffer(bh, WRITE); + jbd2_write_superblock(journal); - trace_jbd2_update_superblock_end(journal, wait); + /* Log is no longer empty */ + write_lock(&journal->j_state_lock); + WARN_ON(!sb->s_sequence); + journal->j_flags &= ~JBD2_FLUSHED; + write_unlock(&journal->j_state_lock); +} -out: - /* If we have just flushed the log (by marking s_start==0), then - * any future commit will have to be careful to update the - * superblock again to re-record the true start of the log. */ +/** + * jbd2_mark_journal_empty() - Mark on disk journal as empty. + * @journal: The journal to update. + * + * Update a journal's dynamic superblock fields to show that journal is empty. + * Write updated superblock to disk waiting for IO to complete. + */ +static void jbd2_mark_journal_empty(journal_t *journal) +{ + journal_superblock_t *sb = journal->j_superblock; + + read_lock(&journal->j_state_lock); + jbd_debug(1, "JBD2: Marking journal as empty (seq %d)\n", + journal->j_tail_sequence); + + sb->s_sequence = cpu_to_be32(journal->j_tail_sequence); + sb->s_start = cpu_to_be32(0); + read_unlock(&journal->j_state_lock); + + jbd2_write_superblock(journal); + /* Log is no longer empty */ write_lock(&journal->j_state_lock); - if (sb->s_start) - journal->j_flags &= ~JBD2_FLUSHED; - else - journal->j_flags |= JBD2_FLUSHED; + journal->j_flags |= JBD2_FLUSHED; write_unlock(&journal->j_state_lock); } + +/** + * jbd2_journal_update_sb_errno() - Update error in the journal. + * @journal: The journal to update. + * + * Update a journal's errno. Write updated superblock to disk waiting for IO + * to complete. + */ +static void jbd2_journal_update_sb_errno(journal_t *journal) +{ + journal_superblock_t *sb = journal->j_superblock; + + read_lock(&journal->j_state_lock); + jbd_debug(1, "JBD2: updating superblock error (errno %d)\n", + journal->j_errno); + sb->s_errno = cpu_to_be32(journal->j_errno); + read_unlock(&journal->j_state_lock); + + jbd2_write_superblock(journal); +} + /* * Read the superblock for a given journal, performing initial * validation of the format. */ - static int journal_get_superblock(journal_t *journal) { struct buffer_head *bh; @@ -1395,15 +1434,10 @@ int jbd2_journal_destroy(journal_t *journal) spin_unlock(&journal->j_list_lock); if (journal->j_sb_buffer) { - if (!is_journal_aborted(journal)) { - /* We can now mark the journal as empty. */ - journal->j_tail = 0; - journal->j_tail_sequence = - ++journal->j_transaction_sequence; - jbd2_journal_update_superblock(journal, 1); - } else { + if (!is_journal_aborted(journal)) + jbd2_mark_journal_empty(journal); + else err = -EIO; - } brelse(journal->j_sb_buffer); } @@ -1562,7 +1596,6 @@ int jbd2_journal_flush(journal_t *journal) { int err = 0; transaction_t *transaction = NULL; - unsigned long old_tail; write_lock(&journal->j_state_lock); @@ -1604,14 +1637,8 @@ int jbd2_journal_flush(journal_t *journal) * the magic code for a fully-recovered superblock. Any future * commits of data to the journal will restore the current * s_start value. */ + jbd2_mark_journal_empty(journal); write_lock(&journal->j_state_lock); - old_tail = journal->j_tail; - journal->j_tail = 0; - write_unlock(&journal->j_state_lock); - jbd2_journal_update_superblock(journal, 1); - write_lock(&journal->j_state_lock); - journal->j_tail = old_tail; - J_ASSERT(!journal->j_running_transaction); J_ASSERT(!journal->j_committing_transaction); J_ASSERT(!journal->j_checkpoint_transactions); @@ -1652,7 +1679,7 @@ int jbd2_journal_wipe(journal_t *journal, int write) err = jbd2_journal_skip_recovery(journal); if (write) - jbd2_journal_update_superblock(journal, 1); + jbd2_mark_journal_empty(journal); no_recovery: return err; @@ -1702,7 +1729,7 @@ static void __journal_abort_soft (journal_t *journal, int errno) __jbd2_journal_abort_hard(journal); if (errno) - jbd2_journal_update_superblock(journal, 1); + jbd2_journal_update_sb_errno(journal); } /** diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 46eef77e6ab..5f05c77438e 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1087,7 +1087,7 @@ extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); -extern void jbd2_journal_update_superblock (journal_t *, int); +extern void jbd2_journal_update_sb_log_tail (journal_t *); extern void __jbd2_journal_abort_hard (journal_t *); extern void jbd2_journal_abort (journal_t *, int); extern int jbd2_journal_errno (journal_t *); diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h index ae59bc207d7..e05a362bf3f 100644 --- a/include/trace/events/jbd2.h +++ b/include/trace/events/jbd2.h @@ -236,25 +236,21 @@ TRACE_EVENT(jbd2_cleanup_journal_tail, __entry->block_nr, __entry->freed) ); -TRACE_EVENT(jbd2_update_superblock_end, +TRACE_EVENT(jbd2_write_superblock, - TP_PROTO(journal_t *journal, int wait), + TP_PROTO(journal_t *journal), - TP_ARGS(journal, wait), + TP_ARGS(journal), TP_STRUCT__entry( __field( dev_t, dev ) - __field( int, wait ) ), TP_fast_assign( __entry->dev = journal->j_fs_dev->bd_dev; - __entry->wait = wait; ), - TP_printk("dev %d,%d wait %d", - MAJOR(__entry->dev), MINOR(__entry->dev), - __entry->wait) + TP_printk("dev %d,%d", MAJOR(__entry->dev), MINOR(__entry->dev)) ); #endif /* _TRACE_JBD2_H */ -- cgit v1.2.3-70-g09d2 From 79feb521a44705262d15cc819a4117a447b11ea7 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 13 Mar 2012 22:22:54 -0400 Subject: jbd2: issue cache flush after checkpointing even with internal journal When we reach jbd2_cleanup_journal_tail(), there is no guarantee that checkpointed buffers are on a stable storage - especially if buffers were written out by jbd2_log_do_checkpoint(), they are likely to be only in disk's caches. Thus when we update journal superblock effectively removing old transaction from journal, this write of superblock can get to stable storage before those checkpointed buffers which can result in filesystem corruption after a crash. Thus we must unconditionally issue a cache flush before we update journal superblock in these cases. A similar problem can also occur if journal superblock is written only in disk's caches, other transaction starts reusing space of the transaction cleaned from the log and power failure happens. Subsequent journal replay would still try to replay the old transaction but some of it's blocks may be already overwritten by the new transaction. For this reason we must use WRITE_FUA when updating log tail and we must first write new log tail to disk and update in-memory information only after that. Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/jbd2/checkpoint.c | 75 ++++-------------------- fs/jbd2/commit.c | 11 +++- fs/jbd2/journal.c | 138 +++++++++++++++++++++++++++++++++++++------- fs/jbd2/recovery.c | 5 +- include/linux/jbd2.h | 6 +- include/trace/events/jbd2.h | 11 ++-- 6 files changed, 155 insertions(+), 91 deletions(-) (limited to 'include/linux') diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 19dcd0b86bc..7f7ee5b9040 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -478,79 +478,28 @@ out: int jbd2_cleanup_journal_tail(journal_t *journal) { - transaction_t * transaction; tid_t first_tid; - unsigned long blocknr, freed; + unsigned long blocknr; if (is_journal_aborted(journal)) return 1; - /* OK, work out the oldest transaction remaining in the log, and - * the log block it starts at. - * - * If the log is now empty, we need to work out which is the - * next transaction ID we will write, and where it will - * start. */ - - write_lock(&journal->j_state_lock); - spin_lock(&journal->j_list_lock); - transaction = journal->j_checkpoint_transactions; - if (transaction) { - first_tid = transaction->t_tid; - blocknr = transaction->t_log_start; - } else if ((transaction = journal->j_committing_transaction) != NULL) { - first_tid = transaction->t_tid; - blocknr = transaction->t_log_start; - } else if ((transaction = journal->j_running_transaction) != NULL) { - first_tid = transaction->t_tid; - blocknr = journal->j_head; - } else { - first_tid = journal->j_transaction_sequence; - blocknr = journal->j_head; - } - spin_unlock(&journal->j_list_lock); - J_ASSERT(blocknr != 0); - - /* If the oldest pinned transaction is at the tail of the log - already then there's not much we can do right now. */ - if (journal->j_tail_sequence == first_tid) { - write_unlock(&journal->j_state_lock); + if (!jbd2_journal_get_log_tail(journal, &first_tid, &blocknr)) return 1; - } - - /* OK, update the superblock to recover the freed space. - * Physical blocks come first: have we wrapped beyond the end of - * the log? */ - freed = blocknr - journal->j_tail; - if (blocknr < journal->j_tail) - freed = freed + journal->j_last - journal->j_first; - - trace_jbd2_cleanup_journal_tail(journal, first_tid, blocknr, freed); - jbd_debug(1, - "Cleaning journal tail from %d to %d (offset %lu), " - "freeing %lu\n", - journal->j_tail_sequence, first_tid, blocknr, freed); - - journal->j_free += freed; - journal->j_tail_sequence = first_tid; - journal->j_tail = blocknr; - write_unlock(&journal->j_state_lock); + J_ASSERT(blocknr != 0); /* - * If there is an external journal, we need to make sure that - * any data blocks that were recently written out --- perhaps - * by jbd2_log_do_checkpoint() --- are flushed out before we - * drop the transactions from the external journal. It's - * unlikely this will be necessary, especially with a - * appropriately sized journal, but we need this to guarantee - * correctness. Fortunately jbd2_cleanup_journal_tail() - * doesn't get called all that often. + * We need to make sure that any blocks that were recently written out + * --- perhaps by jbd2_log_do_checkpoint() --- are flushed out before + * we drop the transactions from the journal. It's unlikely this will + * be necessary, especially with an appropriately sized journal, but we + * need this to guarantee correctness. Fortunately + * jbd2_cleanup_journal_tail() doesn't get called all that often. */ - if ((journal->j_fs_dev != journal->j_dev) && - (journal->j_flags & JBD2_BARRIER)) + if (journal->j_flags & JBD2_BARRIER) blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); - if (!(journal->j_flags & JBD2_ABORT)) - jbd2_journal_update_sb_log_tail(journal); + + __jbd2_update_log_tail(journal, first_tid, blocknr); return 0; } diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 6705717d9b7..b89ef84786a 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -341,7 +341,16 @@ void jbd2_journal_commit_transaction(journal_t *journal) if (journal->j_flags & JBD2_FLUSHED) { jbd_debug(3, "super block updated\n"); mutex_lock(&journal->j_checkpoint_mutex); - jbd2_journal_update_sb_log_tail(journal); + /* + * We hold j_checkpoint_mutex so tail cannot change under us. + * We don't need any special data guarantees for writing sb + * since journal is empty and it is ok for write to be + * flushed only with transaction commit. + */ + jbd2_journal_update_sb_log_tail(journal, + journal->j_tail_sequence, + journal->j_tail, + WRITE_SYNC); mutex_unlock(&journal->j_checkpoint_mutex); } else { jbd_debug(3, "superblock not updated\n"); diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index fc5f2acc9f1..c5ff177400f 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -742,6 +742,85 @@ struct journal_head *jbd2_journal_get_descriptor_buffer(journal_t *journal) return jbd2_journal_add_journal_head(bh); } +/* + * Return tid of the oldest transaction in the journal and block in the journal + * where the transaction starts. + * + * If the journal is now empty, return which will be the next transaction ID + * we will write and where will that transaction start. + * + * The return value is 0 if journal tail cannot be pushed any further, 1 if + * it can. + */ +int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid, + unsigned long *block) +{ + transaction_t *transaction; + int ret; + + read_lock(&journal->j_state_lock); + spin_lock(&journal->j_list_lock); + transaction = journal->j_checkpoint_transactions; + if (transaction) { + *tid = transaction->t_tid; + *block = transaction->t_log_start; + } else if ((transaction = journal->j_committing_transaction) != NULL) { + *tid = transaction->t_tid; + *block = transaction->t_log_start; + } else if ((transaction = journal->j_running_transaction) != NULL) { + *tid = transaction->t_tid; + *block = journal->j_head; + } else { + *tid = journal->j_transaction_sequence; + *block = journal->j_head; + } + ret = tid_gt(*tid, journal->j_tail_sequence); + spin_unlock(&journal->j_list_lock); + read_unlock(&journal->j_state_lock); + + return ret; +} + +/* + * Update information in journal structure and in on disk journal superblock + * about log tail. This function does not check whether information passed in + * really pushes log tail further. It's responsibility of the caller to make + * sure provided log tail information is valid (e.g. by holding + * j_checkpoint_mutex all the time between computing log tail and calling this + * function as is the case with jbd2_cleanup_journal_tail()). + * + * Requires j_checkpoint_mutex + */ +void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block) +{ + unsigned long freed; + + BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); + + /* + * We cannot afford for write to remain in drive's caches since as + * soon as we update j_tail, next transaction can start reusing journal + * space and if we lose sb update during power failure we'd replay + * old transaction with possibly newly overwritten data. + */ + jbd2_journal_update_sb_log_tail(journal, tid, block, WRITE_FUA); + write_lock(&journal->j_state_lock); + freed = block - journal->j_tail; + if (block < journal->j_tail) + freed += journal->j_last - journal->j_first; + + trace_jbd2_update_log_tail(journal, tid, block, freed); + jbd_debug(1, + "Cleaning journal tail from %d to %d (offset %lu), " + "freeing %lu\n", + journal->j_tail_sequence, tid, block, freed); + + journal->j_free += freed; + journal->j_tail_sequence = tid; + journal->j_tail = block; + write_unlock(&journal->j_state_lock); +} + struct jbd2_stats_proc_session { journal_t *journal; struct transaction_stats_s *stats; @@ -1125,18 +1204,30 @@ static int journal_reset(journal_t *journal) } else { /* Lock here to make assertions happy... */ mutex_lock(&journal->j_checkpoint_mutex); - /* Add the dynamic fields and write it to disk. */ - jbd2_journal_update_sb_log_tail(journal); + /* + * Update log tail information. We use WRITE_FUA since new + * transaction will start reusing journal space and so we + * must make sure information about current log tail is on + * disk before that. + */ + jbd2_journal_update_sb_log_tail(journal, + journal->j_tail_sequence, + journal->j_tail, + WRITE_FUA); mutex_unlock(&journal->j_checkpoint_mutex); } return jbd2_journal_start_thread(journal); } -static void jbd2_write_superblock(journal_t *journal) +static void jbd2_write_superblock(journal_t *journal, int write_op) { struct buffer_head *bh = journal->j_sb_buffer; + int ret; - trace_jbd2_write_superblock(journal); + trace_jbd2_write_superblock(journal, write_op); + if (!(journal->j_flags & JBD2_BARRIER)) + write_op &= ~(REQ_FUA | REQ_FLUSH); + lock_buffer(bh); if (buffer_write_io_error(bh)) { /* * Oh, dear. A previous attempt to write the journal @@ -1152,40 +1243,45 @@ static void jbd2_write_superblock(journal_t *journal) clear_buffer_write_io_error(bh); set_buffer_uptodate(bh); } - - BUFFER_TRACE(bh, "marking dirty"); - mark_buffer_dirty(bh); - sync_dirty_buffer(bh); + get_bh(bh); + bh->b_end_io = end_buffer_write_sync; + ret = submit_bh(write_op, bh); + wait_on_buffer(bh); if (buffer_write_io_error(bh)) { - printk(KERN_ERR "JBD2: I/O error detected " - "when updating journal superblock for %s.\n", - journal->j_devname); clear_buffer_write_io_error(bh); set_buffer_uptodate(bh); + ret = -EIO; + } + if (ret) { + printk(KERN_ERR "JBD2: Error %d detected when updating " + "journal superblock for %s.\n", ret, + journal->j_devname); } } /** * jbd2_journal_update_sb_log_tail() - Update log tail in journal sb on disk. * @journal: The journal to update. + * @tail_tid: TID of the new transaction at the tail of the log + * @tail_block: The first block of the transaction at the tail of the log + * @write_op: With which operation should we write the journal sb * * Update a journal's superblock information about log tail and write it to * disk, waiting for the IO to complete. */ -void jbd2_journal_update_sb_log_tail(journal_t *journal) +void jbd2_journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid, + unsigned long tail_block, int write_op) { journal_superblock_t *sb = journal->j_superblock; BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); - read_lock(&journal->j_state_lock); - jbd_debug(1, "JBD2: updating superblock (start %ld, seq %d)\n", - journal->j_tail, journal->j_tail_sequence); + jbd_debug(1, "JBD2: updating superblock (start %lu, seq %u)\n", + tail_block, tail_tid); - sb->s_sequence = cpu_to_be32(journal->j_tail_sequence); - sb->s_start = cpu_to_be32(journal->j_tail); - read_unlock(&journal->j_state_lock); + sb->s_sequence = cpu_to_be32(tail_tid); + sb->s_start = cpu_to_be32(tail_block); - jbd2_write_superblock(journal); + jbd2_write_superblock(journal, write_op); /* Log is no longer empty */ write_lock(&journal->j_state_lock); @@ -1214,7 +1310,7 @@ static void jbd2_mark_journal_empty(journal_t *journal) sb->s_start = cpu_to_be32(0); read_unlock(&journal->j_state_lock); - jbd2_write_superblock(journal); + jbd2_write_superblock(journal, WRITE_FUA); /* Log is no longer empty */ write_lock(&journal->j_state_lock); @@ -1240,7 +1336,7 @@ static void jbd2_journal_update_sb_errno(journal_t *journal) sb->s_errno = cpu_to_be32(journal->j_errno); read_unlock(&journal->j_state_lock); - jbd2_write_superblock(journal); + jbd2_write_superblock(journal, WRITE_SYNC); } /* diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index da6d7baf139..c1a03354a22 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -21,6 +21,7 @@ #include #include #include +#include #endif /* @@ -265,7 +266,9 @@ int jbd2_journal_recover(journal_t *journal) err2 = sync_blockdev(journal->j_fs_dev); if (!err) err = err2; - + /* Make sure all replayed data is on permanent storage */ + if (journal->j_flags & JBD2_BARRIER) + blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); return err; } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 5f05c77438e..876a7d87192 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -971,6 +971,9 @@ extern void __journal_clean_data_list(transaction_t *transaction); /* Log buffer allocation */ extern struct journal_head * jbd2_journal_get_descriptor_buffer(journal_t *); int jbd2_journal_next_log_block(journal_t *, unsigned long long *); +int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid, + unsigned long *block); +void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); /* Commit management */ extern void jbd2_journal_commit_transaction(journal_t *); @@ -1087,7 +1090,8 @@ extern int jbd2_journal_destroy (journal_t *); extern int jbd2_journal_recover (journal_t *journal); extern int jbd2_journal_wipe (journal_t *, int); extern int jbd2_journal_skip_recovery (journal_t *); -extern void jbd2_journal_update_sb_log_tail (journal_t *); +extern void jbd2_journal_update_sb_log_tail (journal_t *, tid_t, + unsigned long, int); extern void __jbd2_journal_abort_hard (journal_t *); extern void jbd2_journal_abort (journal_t *, int); extern int jbd2_journal_errno (journal_t *); diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h index e05a362bf3f..127993dbf32 100644 --- a/include/trace/events/jbd2.h +++ b/include/trace/events/jbd2.h @@ -207,7 +207,7 @@ TRACE_EVENT(jbd2_checkpoint_stats, __entry->forced_to_close, __entry->written, __entry->dropped) ); -TRACE_EVENT(jbd2_cleanup_journal_tail, +TRACE_EVENT(jbd2_update_log_tail, TP_PROTO(journal_t *journal, tid_t first_tid, unsigned long block_nr, unsigned long freed), @@ -238,19 +238,22 @@ TRACE_EVENT(jbd2_cleanup_journal_tail, TRACE_EVENT(jbd2_write_superblock, - TP_PROTO(journal_t *journal), + TP_PROTO(journal_t *journal, int write_op), - TP_ARGS(journal), + TP_ARGS(journal, write_op), TP_STRUCT__entry( __field( dev_t, dev ) + __field( int, write_op ) ), TP_fast_assign( __entry->dev = journal->j_fs_dev->bd_dev; + __entry->write_op = write_op; ), - TP_printk("dev %d,%d", MAJOR(__entry->dev), MINOR(__entry->dev)) + TP_printk("dev %d,%d write_op %x", MAJOR(__entry->dev), + MINOR(__entry->dev), __entry->write_op) ); #endif /* _TRACE_JBD2_H */ -- cgit v1.2.3-70-g09d2 From 932bb305ba2a01cd62809644d569f004e77a4355 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 13 Mar 2012 22:45:25 -0400 Subject: jbd2: remove bh_state lock from checkpointing code All accesses to checkpointing entries in journal_head are protected by j_list_lock. Thus __jbd2_journal_remove_checkpoint() doesn't really need bh_state lock. Also the only part of journal head that the rest of checkpointing code needs to check is jh->b_transaction which is safe to read under j_list_lock. So we can safely remove bh_state lock from all of checkpointing code which makes it considerably prettier. Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/jbd2/checkpoint.c | 59 ++++++-------------------------------------- include/linux/journal-head.h | 2 ++ 2 files changed, 9 insertions(+), 52 deletions(-) (limited to 'include/linux') diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 546c3b300ee..c78841ee81c 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -88,14 +88,13 @@ static inline void __buffer_relink_io(struct journal_head *jh) * whole transaction. * * Requires j_list_lock - * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it */ static int __try_to_free_cp_buf(struct journal_head *jh) { int ret = 0; struct buffer_head *bh = jh2bh(jh); - if (jh->b_jlist == BJ_None && !buffer_locked(bh) && + if (jh->b_transaction == NULL && !buffer_locked(bh) && !buffer_dirty(bh) && !buffer_write_io_error(bh)) { /* * Get our reference so that bh cannot be freed before @@ -104,11 +103,8 @@ static int __try_to_free_cp_buf(struct journal_head *jh) get_bh(bh); JBUFFER_TRACE(jh, "remove from checkpoint list"); ret = __jbd2_journal_remove_checkpoint(jh) + 1; - jbd_unlock_bh_state(bh); BUFFER_TRACE(bh, "release"); __brelse(bh); - } else { - jbd_unlock_bh_state(bh); } return ret; } @@ -179,21 +175,6 @@ void __jbd2_log_wait_for_space(journal_t *journal) } } -/* - * We were unable to perform jbd_trylock_bh_state() inside j_list_lock. - * The caller must restart a list walk. Wait for someone else to run - * jbd_unlock_bh_state(). - */ -static void jbd_sync_bh(journal_t *journal, struct buffer_head *bh) - __releases(journal->j_list_lock) -{ - get_bh(bh); - spin_unlock(&journal->j_list_lock); - jbd_lock_bh_state(bh); - jbd_unlock_bh_state(bh); - put_bh(bh); -} - /* * Clean up transaction's list of buffers submitted for io. * We wait for any pending IO to complete and remove any clean @@ -222,15 +203,9 @@ restart: while (!released && transaction->t_checkpoint_io_list) { jh = transaction->t_checkpoint_io_list; bh = jh2bh(jh); - if (!jbd_trylock_bh_state(bh)) { - jbd_sync_bh(journal, bh); - spin_lock(&journal->j_list_lock); - goto restart; - } get_bh(bh); if (buffer_locked(bh)) { spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); wait_on_buffer(bh); /* the journal_head may have gone by now */ BUFFER_TRACE(bh, "brelse"); @@ -246,7 +221,6 @@ restart: * it has been written out and so we can drop it from the list */ released = __jbd2_journal_remove_checkpoint(jh); - jbd_unlock_bh_state(bh); __brelse(bh); } @@ -280,7 +254,6 @@ __flush_batch(journal_t *journal, int *batch_count) * be written out. * * Called with j_list_lock held and drops it if 1 is returned - * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it */ static int __process_buffer(journal_t *journal, struct journal_head *jh, int *batch_count, transaction_t *transaction) @@ -291,7 +264,6 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, if (buffer_locked(bh)) { get_bh(bh); spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); wait_on_buffer(bh); /* the journal_head may have gone by now */ BUFFER_TRACE(bh, "brelse"); @@ -303,7 +275,6 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, transaction->t_chp_stats.cs_forced_to_close++; spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); if (unlikely(journal->j_flags & JBD2_UNMOUNT)) /* * The journal thread is dead; so starting and @@ -322,11 +293,9 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, if (unlikely(buffer_write_io_error(bh))) ret = -EIO; get_bh(bh); - J_ASSERT_JH(jh, !buffer_jbddirty(bh)); BUFFER_TRACE(bh, "remove from checkpoint"); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(bh); __brelse(bh); } else { /* @@ -341,7 +310,6 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, J_ASSERT_BH(bh, !buffer_jwrite(bh)); journal->j_chkpt_bhs[*batch_count] = bh; __buffer_relink_io(jh); - jbd_unlock_bh_state(bh); transaction->t_chp_stats.cs_written++; (*batch_count)++; if (*batch_count == JBD2_NR_BATCH) { @@ -405,15 +373,7 @@ restart: int retry = 0, err; while (!retry && transaction->t_checkpoint_list) { - struct buffer_head *bh; - jh = transaction->t_checkpoint_list; - bh = jh2bh(jh); - if (!jbd_trylock_bh_state(bh)) { - jbd_sync_bh(journal, bh); - retry = 1; - break; - } retry = __process_buffer(journal, jh, &batch_count, transaction); if (retry < 0 && !result) @@ -529,15 +489,12 @@ static int journal_clean_one_cp_list(struct journal_head *jh, int *released) do { jh = next_jh; next_jh = jh->b_cpnext; - /* Use trylock because of the ranking */ - if (jbd_trylock_bh_state(jh2bh(jh))) { - ret = __try_to_free_cp_buf(jh); - if (ret) { - freed++; - if (ret == 2) { - *released = 1; - return freed; - } + ret = __try_to_free_cp_buf(jh); + if (ret) { + freed++; + if (ret == 2) { + *released = 1; + return freed; } } /* @@ -620,9 +577,7 @@ out: * The function can free jh and bh. * * This function is called with j_list_lock held. - * This function is called with jbd_lock_bh_state(jh2bh(jh)) */ - int __jbd2_journal_remove_checkpoint(struct journal_head *jh) { struct transaction_chp_stats_s *stats; diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 423cb6d78ee..c18b46f8aee 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -66,6 +66,8 @@ struct journal_head { * transaction (if there is one). Only applies to buffers on a * transaction's data or metadata journaling list. * [j_list_lock] [jbd_lock_bh_state()] + * Either of these locks is enough for reading, both are needed for + * changes. */ transaction_t *b_transaction; -- cgit v1.2.3-70-g09d2 From 3339578f05787259917788f461f4196b7349c2a4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 13 Mar 2012 22:45:38 -0400 Subject: jbd2: cleanup journal tail after transaction commit Normally, we have to issue a cache flush before we can update journal tail in journal superblock, effectively wiping out old transactions from the journal. So use the fact that during transaction commit we issue cache flush anyway and opportunistically push journal tail as far as we can. Since update of journal superblock is still costly (we have to use WRITE_FUA), we update log tail only if we can free significant amount of space. Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/jbd2/commit.c | 32 ++++++++++++++++++++++++++++++++ fs/jbd2/journal.c | 13 +++++++++++++ include/linux/jbd2.h | 1 + 3 files changed, 46 insertions(+) (limited to 'include/linux') diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index b89ef84786a..1dfcb207ea6 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -331,6 +331,10 @@ void jbd2_journal_commit_transaction(journal_t *journal) struct buffer_head *cbh = NULL; /* For transactional checksums */ __u32 crc32_sum = ~0; struct blk_plug plug; + /* Tail of the journal */ + unsigned long first_block; + tid_t first_tid; + int update_tail; /* * First job: lock down the current transaction and wait for @@ -688,10 +692,30 @@ start_journal_io: err = 0; } + /* + * Get current oldest transaction in the log before we issue flush + * to the filesystem device. After the flush we can be sure that + * blocks of all older transactions are checkpointed to persistent + * storage and we will be safe to update journal start in the + * superblock with the numbers we get here. + */ + update_tail = + jbd2_journal_get_log_tail(journal, &first_tid, &first_block); + write_lock(&journal->j_state_lock); + if (update_tail) { + long freed = first_block - journal->j_tail; + + if (first_block < journal->j_tail) + freed += journal->j_last - journal->j_first; + /* Update tail only if we free significant amount of space */ + if (freed < journal->j_maxlen / 4) + update_tail = 0; + } J_ASSERT(commit_transaction->t_state == T_COMMIT); commit_transaction->t_state = T_COMMIT_DFLUSH; write_unlock(&journal->j_state_lock); + /* * If the journal is not located on the file system device, * then we must flush the file system device before we issue @@ -842,6 +866,14 @@ wait_for_iobuf: if (err) jbd2_journal_abort(journal, err); + /* + * Now disk caches for filesystem device are flushed so we are safe to + * erase checkpointed transactions from the log by updating journal + * superblock. + */ + if (update_tail) + jbd2_update_log_tail(journal, first_tid, first_block); + /* End of a transaction! Finally, we can do checkpoint processing: any buffers committed as a result of this transaction can be removed from any checkpoint list it was on diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index c5ff177400f..bda564f6386 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -821,6 +821,19 @@ void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block) write_unlock(&journal->j_state_lock); } +/* + * This is a variaon of __jbd2_update_log_tail which checks for validity of + * provided log tail and locks j_checkpoint_mutex. So it is safe against races + * with other threads updating log tail. + */ +void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block) +{ + mutex_lock(&journal->j_checkpoint_mutex); + if (tid_gt(tid, journal->j_tail_sequence)) + __jbd2_update_log_tail(journal, tid, block); + mutex_unlock(&journal->j_checkpoint_mutex); +} + struct jbd2_stats_proc_session { journal_t *journal; struct transaction_stats_s *stats; diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 876a7d87192..912c30a8ddb 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -974,6 +974,7 @@ int jbd2_journal_next_log_block(journal_t *, unsigned long long *); int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid, unsigned long *block); void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); +void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block); /* Commit management */ extern void jbd2_journal_commit_transaction(journal_t *); -- cgit v1.2.3-70-g09d2 From 6a8a13e03861c0ab83ab07d573ca793cff0e5d00 Mon Sep 17 00:00:00 2001 From: Bernd Schubert Date: Tue, 13 Mar 2012 22:51:38 -0400 Subject: fs: add new FMODE flags: FMODE_32bithash and FMODE_64bithash Those flags are supposed to be set by NFS readdir() to tell ext3/ext4 to 32bit (NFSv2) or 64bit hash values (offsets) in seekdir(). Signed-off-by: Bernd Schubert Signed-off-by: "Theodore Ts'o" --- include/linux/fs.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 386da09f229..8975a560293 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -92,6 +92,10 @@ struct inodes_stat_t { /* File is opened using open(.., 3, ..) and is writeable only for ioctls (specialy hack for floppy.c) */ #define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) /* * Don't update ctime and mtime. -- cgit v1.2.3-70-g09d2 From 37d73998920859784e6504462a2fd5f52cc08051 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 14 Mar 2012 00:03:02 +0100 Subject: perf: Add ifdef to remove unused enum switch warnings Fix for unused symbols in switch warnings. Link: http://lkml.kernel.org/r/20120313230302.GA1514@m.redhat.com Cc: Mark Brown Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index dd478fc8f9f..5f3f3be5af0 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -144,12 +144,14 @@ struct event_filter; enum trace_reg { TRACE_REG_REGISTER, TRACE_REG_UNREGISTER, +#ifdef CONFIG_PERF_EVENTS TRACE_REG_PERF_REGISTER, TRACE_REG_PERF_UNREGISTER, TRACE_REG_PERF_OPEN, TRACE_REG_PERF_CLOSE, TRACE_REG_PERF_ADD, TRACE_REG_PERF_DEL, +#endif }; struct ftrace_event_call; -- cgit v1.2.3-70-g09d2 From bf4289cba02b8cf770ecd7959ca70839f0dd9d3c Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 29 Dec 2011 14:43:24 +0800 Subject: ATMEL: fix nand ecc support So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc and hardware). Set ecc mode in the boards to soft as currently in the driver. Move platform data to a common header include/linux/platform_data/atmel_nand.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Hans-Christian Egtvedt Acked-by: David Woodhouse --- arch/arm/mach-at91/board-afeb-9260v1.c | 1 + arch/arm/mach-at91/board-cam60.c | 1 + arch/arm/mach-at91/board-cpu9krea.c | 1 + arch/arm/mach-at91/board-dt.c | 1 + arch/arm/mach-at91/board-kb9202.c | 1 + arch/arm/mach-at91/board-neocore926.c | 1 + arch/arm/mach-at91/board-qil-a9260.c | 1 + arch/arm/mach-at91/board-rm9200dk.c | 1 + arch/arm/mach-at91/board-sam9-l9260.c | 1 + arch/arm/mach-at91/board-sam9260ek.c | 1 + arch/arm/mach-at91/board-sam9261ek.c | 1 + arch/arm/mach-at91/board-sam9263ek.c | 1 + arch/arm/mach-at91/board-sam9g20ek.c | 1 + arch/arm/mach-at91/board-sam9m10g45ek.c | 1 + arch/arm/mach-at91/board-sam9rlek.c | 1 + arch/arm/mach-at91/board-snapper9260.c | 1 + arch/arm/mach-at91/board-stamp9g20.c | 1 + arch/arm/mach-at91/board-usb-a926x.c | 1 + arch/arm/mach-at91/board-yl-9200.c | 1 + arch/arm/mach-at91/include/mach/board.h | 15 +-------------- arch/avr32/boards/atngw100/setup.c | 1 + arch/avr32/boards/atstk1000/atstk1002.c | 1 + arch/avr32/mach-at32ap/include/mach/board.h | 13 +------------ drivers/mtd/nand/atmel_nand.c | 25 ++++++------------------- include/linux/platform_data/atmel.h | 26 ++++++++++++++++++++++++++ 25 files changed, 55 insertions(+), 45 deletions(-) create mode 100644 include/linux/platform_data/atmel.h (limited to 'include/linux') diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 3bb40694b02..161efbaa102 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, + .ecc_mode = NAND_ECC_SOFT, .parts = afeb9260_nand_partition, .num_parts = ARRAY_SIZE(afeb9260_nand_partition), .det_pin = -EINVAL, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 8510e9e5498..c6d44ee0c77 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA9, .enable_pin = AT91_PIN_PA7, + .ecc_mode = NAND_ECC_SOFT, .parts = cam60_nand_partition, .num_parts = ARRAY_SIZE(cam60_nand_partition), }; diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 989e1c5a9ca..5f3680e7c88 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = { .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; #ifdef CONFIG_MACH_CPU9260 diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index 583b72472ad..e1505fd575e 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -47,6 +47,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index bb991458201..59b92aab9bc 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC29, .enable_pin = AT91_PIN_PC28, + .ecc_mode = NAND_ECC_SOFT, .parts = kb9202_nand_partition, .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 3f8617c0e04..57d5f6a4726 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = { .rdy_pin = AT91_PIN_PB19, .rdy_pin_active_low = 1, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, .parts = neocore926_nand_partition, .num_parts = ARRAY_SIZE(neocore926_nand_partition), .det_pin = -EINVAL, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index e029d220cb8..97907e4fb34 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 9083df04e7e..d0ec1660378 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -150,6 +150,7 @@ static struct atmel_nand_data __initdata dk_nand_data = { .det_pin = AT91_PIN_PB1, .rdy_pin = AT91_PIN_PC2, .enable_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, .parts = dk_nand_partition, .num_parts = ARRAY_SIZE(dk_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 84bce587735..e8b116b6cba 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index be8233bcabd..3118ab12095 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -181,6 +181,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 40895072a1a..60cf37b4997 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -187,6 +187,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 29f66052fe6..aeabf850cb8 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -187,6 +187,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 843d6286c6f..419e0d5c6d5 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -166,6 +166,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 57497e2b887..7b8c647db5f 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -148,6 +148,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index c1366d0032b..70a026de2b2 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -94,6 +94,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PD17, .enable_pin = AT91_PIN_PB6, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 3c2e3fcc310..ebc9d01ce74 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = { .bus_width_16 = 0, .enable_pin = -EINVAL, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 72eb3b4d9ab..7640049410a 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = { .enable_pin = AT91_PIN_PC14, .bus_width_16 = 0, .det_pin = -EINVAL, + .ecc_mode = NAND_ECC_SOFT, }; static struct sam9_smc_config __initdata nand_smc_config = { diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 26c36fc2d1e..cc93152a4da 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -198,6 +198,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, + .ecc_mode = NAND_ECC_SOFT, .parts = ek_nand_partition, .num_parts = ARRAY_SIZE(ek_nand_partition), }; diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 52f460768f7..38dd279d30b 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = { .det_pin = -EINVAL, .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ + .ecc_mode = NAND_ECC_SOFT, .parts = yl9200_nand_partition, .num_parts = ARRAY_SIZE(yl9200_nand_partition), }; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index dc8d6d4f17c..544a5d5ce41 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -41,6 +41,7 @@ #include #include #include +#include /* USB Device */ struct at91_udc_data { @@ -98,20 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data); - /* NAND / SmartMedia */ -struct atmel_nand_data { - int enable_pin; /* chip enable */ - int det_pin; /* card detect */ - int rdy_pin; /* ready/busy */ - u8 rdy_pin_active_low; /* rdy_pin value is inverted */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - u8 correction_cap; /* PMECC correction capability */ - u16 sector_size; /* Sector size for PMECC */ - struct mtd_partition *parts; - unsigned int num_parts; -}; extern void __init at91_add_device_nand(struct atmel_nand_data *data); /* I2C*/ diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 7c756fb189f..afeae8978a8 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -97,6 +97,7 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = { .rdy_pin = GPIO_PIN_PB(28), .enable_pin = GPIO_PIN_PE(23), .bus_width_16 = true, + .ecc_mode = NAND_ECC_SOFT, .parts = nand_partitions, .num_parts = ARRAY_SIZE(nand_partitions), }; diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index c56ddac85d6..dc526332148 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -95,6 +95,7 @@ static struct atmel_nand_data atstk1006_nand_data __initdata = { .ale = 22, .rdy_pin = GPIO_PIN_PB(30), .enable_pin = GPIO_PIN_PB(29), + .ecc_mode = NAND_ECC_SOFT, .parts = nand_partitions, .num_parts = ARRAY_SIZE(num_partitions), }; diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 67b111ce332..71733866cb4 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -7,6 +7,7 @@ #include #include #include +#include #define GPIO_PIN_NONE (-1) @@ -116,18 +117,6 @@ struct platform_device * at32_add_device_cf(unsigned int id, unsigned int extint, struct cf_platform_data *data); -/* NAND / SmartMedia */ -struct atmel_nand_data { - int enable_pin; /* chip enable */ - int det_pin; /* card detect */ - int rdy_pin; /* ready/busy */ - u8 rdy_pin_active_low; /* rdy_pin value is inverted */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition *parts; - unsigned int num_parts; -}; struct platform_device * at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 35b4fb55dbd..fb87b03f1a2 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -34,22 +34,10 @@ #include #include #include +#include -#include #include -#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW -#define hard_ecc 1 -#else -#define hard_ecc 0 -#endif - -#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE -#define no_ecc 1 -#else -#define no_ecc 0 -#endif - static int use_dma = 1; module_param(use_dma, int, 0); @@ -532,23 +520,22 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (gpio_is_valid(host->board->rdy_pin)) nand_chip->dev_ready = atmel_nand_device_ready; + nand_chip->ecc.mode = host->board->ecc_mode; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!regs && hard_ecc) { + if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) { printk(KERN_ERR "atmel_nand: can't get I/O resource " "regs\nFalling back on software ECC\n"); + nand_chip->ecc.mode = NAND_ECC_SOFT; } - nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ - if (no_ecc) - nand_chip->ecc.mode = NAND_ECC_NONE; - if (hard_ecc && regs) { + if (nand_chip->ecc.mode == NAND_ECC_HW) { host->ecc = ioremap(regs->start, resource_size(regs)); if (host->ecc == NULL) { printk(KERN_ERR "atmel_nand: ioremap failed\n"); res = -EIO; goto err_ecc_ioremap; } - nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.calculate = atmel_nand_calculate; nand_chip->ecc.correct = atmel_nand_correct; nand_chip->ecc.hwctl = atmel_nand_hwctl; diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h new file mode 100644 index 00000000000..7b8a445f2b4 --- /dev/null +++ b/include/linux/platform_data/atmel.h @@ -0,0 +1,26 @@ +/* + * atmel platform data + * + * GPL v2 Only + */ + +#ifndef __ATMEL_NAND_H__ +#define __ATMEL_NAND_H__ + +#include + + /* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + u8 ecc_mode; /* ecc mode */ + struct mtd_partition *parts; + unsigned int num_parts; +}; + +#endif /* __ATMEL_NAND_H__ */ -- cgit v1.2.3-70-g09d2 From 3dcb7ea137c882580d4d421077e9097ef099a3a9 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 29 Dec 2011 14:59:54 +0800 Subject: mtd/atmel_nand: add on_flash_bbt to enable the use of On Flash BBT This will allow to enable it from the board. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 2 +- include/linux/platform_data/atmel.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index fb87b03f1a2..045d174b827 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -562,7 +562,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) } } - if (on_flash_bbt) { + if (host->board->on_flash_bbt || on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 7b8a445f2b4..d056263545b 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -19,6 +19,7 @@ struct atmel_nand_data { u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ u8 ecc_mode; /* ecc mode */ + u8 on_flash_bbt; /* bbt on flash */ struct mtd_partition *parts; unsigned int num_parts; }; -- cgit v1.2.3-70-g09d2 From fa4d34ccd0914ac87336ea2c17e9370dfecef286 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 7 Feb 2012 12:12:51 +0800 Subject: of: introduce helper to manage boolean of_property_read_bool Search for a property in a device node. Returns true if the property exist false otherwise. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Rob Herring Acked-by: Arnd Bergmann Acked-by: Grant Likely --- include/linux/of.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index a75a831e205..50059cf6313 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -342,6 +342,22 @@ static inline int of_machine_is_compatible(const char *compat) #define of_match_node(_matches, _node) NULL #endif /* CONFIG_OF */ +/** + * of_property_read_bool - Findfrom a property + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node. + * Returns true if the property exist false otherwise. + */ +static inline bool of_property_read_bool(const struct device_node *np, + const char *propname) +{ + struct property *prop = of_find_property(np, propname, NULL); + + return prop ? true : false; +} + static inline int of_property_read_u32(const struct device_node *np, const char *propname, u32 *out_value) -- cgit v1.2.3-70-g09d2 From 770d7c39af940da24dd4c2c048576d778ac0abd4 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 28 Jan 2012 12:12:36 +0800 Subject: of/mtd/nand: add generic bindings and helpers - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Grant Likely Acked-by: Stefan Roese --- Documentation/devicetree/bindings/mtd/nand.txt | 7 +++ drivers/of/Kconfig | 4 ++ drivers/of/Makefile | 1 + drivers/of/of_mtd.c | 85 ++++++++++++++++++++++++++ include/linux/of_mtd.h | 19 ++++++ 5 files changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/nand.txt create mode 100644 drivers/of/of_mtd.c create mode 100644 include/linux/of_mtd.h (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt new file mode 100644 index 00000000000..03855c8c492 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -0,0 +1,7 @@ +* MTD generic binding + +- nand-ecc-mode : String, operation mode of the NAND ecc mode. + Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", + "soft_bch". +- nand-bus-width : 8 or 16 bus width if not present 8 +- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 268163dd71c..fa666a93540 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -90,4 +90,8 @@ config OF_PCI_IRQ help OpenFirmware PCI IRQ routing helpers +config OF_MTD + depends on MTD + def_bool y + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index a73f5a51ff4..aa90e602c8a 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_OF_SELFTEST) += selftest.o obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o +obj-$(CONFIG_OF_MTD) += of_mtd.o diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c new file mode 100644 index 00000000000..e7cad627a5d --- /dev/null +++ b/drivers/of/of_mtd.c @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + * + */ +#include +#include +#include +#include + +/** + * It maps 'enum nand_ecc_modes_t' found in include/linux/mtd/nand.h + * into the device tree binding of 'nand-ecc', so that MTD + * device driver can get nand ecc from device tree. + */ +static const char *nand_ecc_modes[] = { + [NAND_ECC_NONE] = "none", + [NAND_ECC_SOFT] = "soft", + [NAND_ECC_HW] = "hw", + [NAND_ECC_HW_SYNDROME] = "hw_syndrome", + [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first", + [NAND_ECC_SOFT_BCH] = "soft_bch", +}; + +/** + * of_get_nand_ecc_mode - Get nand ecc mode for given device_node + * @np: Pointer to the given device_node + * + * The function gets ecc mode string from property 'nand-ecc-mode', + * and return its index in nand_ecc_modes table, or errno in error case. + */ +const int of_get_nand_ecc_mode(struct device_node *np) +{ + const char *pm; + int err, i; + + err = of_property_read_string(np, "nand-ecc-mode", &pm); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(nand_ecc_modes); i++) + if (!strcasecmp(pm, nand_ecc_modes[i])) + return i; + + return -ENODEV; +} +EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode); + +/** + * of_get_nand_bus_width - Get nand bus witdh for given device_node + * @np: Pointer to the given device_node + * + * return bus width option, or errno in error case. + */ +int of_get_nand_bus_width(struct device_node *np) +{ + u32 val; + + if (of_property_read_u32(np, "nand-bus-width", &val)) + return 8; + + switch(val) { + case 8: + case 16: + return val; + default: + return -EIO; + } +} +EXPORT_SYMBOL_GPL(of_get_nand_bus_width); + +/** + * of_get_nand_on_flash_bbt - Get nand on flash bbt for given device_node + * @np: Pointer to the given device_node + * + * return true if present false other wise + */ +bool of_get_nand_on_flash_bbt(struct device_node *np) +{ + return of_property_read_bool(np, "nand-on-flash-bbt"); +} +EXPORT_SYMBOL_GPL(of_get_nand_on_flash_bbt); diff --git a/include/linux/of_mtd.h b/include/linux/of_mtd.h new file mode 100644 index 00000000000..bae1b6094c6 --- /dev/null +++ b/include/linux/of_mtd.h @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * OF helpers for mtd. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_MTD_H +#define __LINUX_OF_NET_H + +#ifdef CONFIG_OF_MTD +#include +extern const int of_get_nand_ecc_mode(struct device_node *np); +int of_get_nand_bus_width(struct device_node *np); +bool of_get_nand_on_flash_bbt(struct device_node *np); +#endif + +#endif /* __LINUX_OF_MTD_H */ -- cgit v1.2.3-70-g09d2 From 48b25c43e6eebb6c0edf72935e8720385beca76b Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 15 Mar 2012 13:13:38 -0400 Subject: [PATCH v3] ipc: provide generic compat versions of IPC syscalls When using the "compat" APIs, architectures will generally want to be able to make direct syscalls to msgsnd(), shmctl(), etc., and in the kernel we would want them to be handled directly by compat_sys_xxx() functions, as is true for other compat syscalls. However, for historical reasons, several of the existing compat IPC syscalls do not do this. semctl() expects a pointer to the fourth argument, instead of the fourth argument itself. msgsnd(), msgrcv() and shmat() expect arguments in different order. This change adds an ARCH_WANT_OLD_COMPAT_IPC config option that can be set to preserve this behavior for ports that use it (x86, sparc, powerpc, s390, and mips). No actual semantics are changed for those architectures, and there is only a minimal amount of code refactoring in ipc/compat.c. Newer architectures like tile (and perhaps future architectures such as arm64 and unicore64) should not select this option, and thus can avoid having any IPC-specific code at all in their architecture-specific compat layer. In the same vein, if this option is not selected, IPC_64 mode is assumed, since that's what the headers expect. The workaround code in "tile" for msgsnd() and msgrcv() is removed with this change; it also fixes the bug that shmat() and semctl() were not being properly handled. Reviewed-by: Arnd Bergmann Signed-off-by: Chris Metcalf --- arch/Kconfig | 3 ++ arch/mips/Kconfig | 1 + arch/powerpc/Kconfig | 1 + arch/s390/Kconfig | 1 + arch/sparc/Kconfig | 1 + arch/tile/include/asm/compat.h | 11 ------- arch/tile/kernel/compat.c | 43 -------------------------- arch/x86/Kconfig | 1 + include/linux/compat.h | 12 +++++++- ipc/compat.c | 70 ++++++++++++++++++++++++++++++++++++++---- 10 files changed, 83 insertions(+), 61 deletions(-) (limited to 'include/linux') diff --git a/arch/Kconfig b/arch/Kconfig index 4f55c736be1..b37f8f3ffa5 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -199,4 +199,7 @@ config HAVE_CMPXCHG_LOCAL config HAVE_CMPXCHG_DOUBLE bool +config ARCH_WANT_OLD_COMPAT_IPC + bool + source "kernel/gcov/Kconfig" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5ab6e89603c..4bbbb40f352 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2456,6 +2456,7 @@ config MIPS32_COMPAT config COMPAT bool depends on MIPS32_COMPAT + select ARCH_WANT_OLD_COMPAT_IPC default y config SYSVIPC_COMPAT diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 1919634a9b3..48ab0bb3892 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -152,6 +152,7 @@ config COMPAT bool default y if PPC64 select COMPAT_BINFMT_ELF + select ARCH_WANT_OLD_COMPAT_IPC config SYSVIPC_COMPAT bool diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 6d99a5fcc09..0ff53e35009 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -218,6 +218,7 @@ config COMPAT prompt "Kernel support for 31 bit emulation" depends on 64BIT select COMPAT_BINFMT_ELF + select ARCH_WANT_OLD_COMPAT_IPC help Select this option if you want to enable your system kernel to handle system-calls from ELF binaries for 31 bit ESA. This option diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index ca5580e4d81..64e1a8e7cab 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -576,6 +576,7 @@ config COMPAT depends on SPARC64 default y select COMPAT_BINFMT_ELF + select ARCH_WANT_OLD_COMPAT_IPC config SYSVIPC_COMPAT bool diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h index bf95f55b82b..4b4b28969a6 100644 --- a/arch/tile/include/asm/compat.h +++ b/arch/tile/include/asm/compat.h @@ -242,17 +242,6 @@ long compat_sys_fallocate(int fd, int mode, long compat_sys_sched_rr_get_interval(compat_pid_t pid, struct compat_timespec __user *interval); -/* Versions of compat functions that differ from generic Linux. */ -struct compat_msgbuf; -long tile_compat_sys_msgsnd(int msqid, - struct compat_msgbuf __user *msgp, - size_t msgsz, int msgflg); -long tile_compat_sys_msgrcv(int msqid, - struct compat_msgbuf __user *msgp, - size_t msgsz, long msgtyp, int msgflg); -long tile_compat_sys_ptrace(compat_long_t request, compat_long_t pid, - compat_long_t addr, compat_long_t data); - /* Tilera Linux syscalls that don't have "compat" versions. */ #define compat_sys_flush_cache sys_flush_cache diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c index bf5e9d70266..d67459b9ac2 100644 --- a/arch/tile/kernel/compat.c +++ b/arch/tile/kernel/compat.c @@ -16,7 +16,6 @@ #define __SYSCALL_COMPAT #include -#include #include #include #include @@ -95,52 +94,10 @@ long compat_sys_sched_rr_get_interval(compat_pid_t pid, return ret; } -/* - * The usual compat_sys_msgsnd() and _msgrcv() seem to be assuming - * some different calling convention than our normal 32-bit tile code. - */ - -/* Already defined in ipc/compat.c, but we need it here. */ -struct compat_msgbuf { - compat_long_t mtype; - char mtext[1]; -}; - -long tile_compat_sys_msgsnd(int msqid, - struct compat_msgbuf __user *msgp, - size_t msgsz, int msgflg) -{ - compat_long_t mtype; - - if (get_user(mtype, &msgp->mtype)) - return -EFAULT; - return do_msgsnd(msqid, mtype, msgp->mtext, msgsz, msgflg); -} - -long tile_compat_sys_msgrcv(int msqid, - struct compat_msgbuf __user *msgp, - size_t msgsz, long msgtyp, int msgflg) -{ - long err, mtype; - - err = do_msgrcv(msqid, &mtype, msgp->mtext, msgsz, msgtyp, msgflg); - if (err < 0) - goto out; - - if (put_user(mtype, &msgp->mtype)) - err = -EFAULT; - out: - return err; -} - /* Provide the compat syscall number to call mapping. */ #undef __SYSCALL #define __SYSCALL(nr, call) [nr] = (call), -/* The generic versions of these don't work for Tile. */ -#define compat_sys_msgrcv tile_compat_sys_msgrcv -#define compat_sys_msgsnd tile_compat_sys_msgsnd - /* See comments in sys.c */ #define compat_sys_fadvise64_64 sys32_fadvise64_64 #define compat_sys_readahead sys32_readahead diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e189f..cde163dc605 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2178,6 +2178,7 @@ config IA32_AOUT config COMPAT def_bool y depends on IA32_EMULATION + select ARCH_WANT_OLD_COMPAT_IPC config COMPAT_FOR_U64_ALIGNMENT def_bool COMPAT diff --git a/include/linux/compat.h b/include/linux/compat.h index 7e05fcee75a..35c2dbf2448 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -224,6 +224,7 @@ struct compat_sysinfo; struct compat_sysctl_args; struct compat_kexec_segment; struct compat_mq_attr; +struct compat_msgbuf; extern void compat_exit_robust_list(struct task_struct *curr); @@ -234,13 +235,22 @@ asmlinkage long compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr, compat_size_t __user *len_ptr); +#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC long compat_sys_semctl(int first, int second, int third, void __user *uptr); long compat_sys_msgsnd(int first, int second, int third, void __user *uptr); long compat_sys_msgrcv(int first, int second, int msgtyp, int third, int version, void __user *uptr); -long compat_sys_msgctl(int first, int second, void __user *uptr); long compat_sys_shmat(int first, int second, compat_uptr_t third, int version, void __user *uptr); +#else +long compat_sys_semctl(int semid, int semnum, int cmd, int arg); +long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, int msgflg); +long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, long msgtyp, int msgflg); +long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg); +#endif +long compat_sys_msgctl(int first, int second, void __user *uptr); long compat_sys_shmctl(int first, int second, void __user *uptr); long compat_sys_semtimedop(int semid, struct sembuf __user *tsems, unsigned nsems, const struct compat_timespec __user *timeout); diff --git a/ipc/compat.c b/ipc/compat.c index 845a28738d3..a6df704f521 100644 --- a/ipc/compat.c +++ b/ipc/compat.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -117,6 +118,7 @@ extern int sem_ctls[]; static inline int compat_ipc_parse_version(int *cmd) { +#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC int version = *cmd & IPC_64; /* this is tricky: architectures that have support for the old @@ -128,6 +130,10 @@ static inline int compat_ipc_parse_version(int *cmd) *cmd &= ~IPC_64; #endif return version; +#else + /* With the asm-generic APIs, we always use the 64-bit versions. */ + return IPC_64; +#endif } static inline int __get_compat_ipc64_perm(struct ipc64_perm *p64, @@ -232,10 +238,9 @@ static inline int put_compat_semid_ds(struct semid64_ds *s, return err; } -long compat_sys_semctl(int first, int second, int third, void __user *uptr) +static long do_compat_semctl(int first, int second, int third, u32 pad) { union semun fourth; - u32 pad; int err, err2; struct semid64_ds s64; struct semid64_ds __user *up64; @@ -243,10 +248,6 @@ long compat_sys_semctl(int first, int second, int third, void __user *uptr) memset(&s64, 0, sizeof(s64)); - if (!uptr) - return -EINVAL; - if (get_user(pad, (u32 __user *) uptr)) - return -EFAULT; if ((third & (~IPC_64)) == SETVAL) fourth.val = (int) pad; else @@ -305,6 +306,18 @@ long compat_sys_semctl(int first, int second, int third, void __user *uptr) return err; } +#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC +long compat_sys_semctl(int first, int second, int third, void __user *uptr) +{ + u32 pad; + + if (!uptr) + return -EINVAL; + if (get_user(pad, (u32 __user *) uptr)) + return -EFAULT; + return do_compat_semctl(first, second, third, pad); +} + long compat_sys_msgsnd(int first, int second, int third, void __user *uptr) { struct compat_msgbuf __user *up = uptr; @@ -353,6 +366,37 @@ long compat_sys_msgrcv(int first, int second, int msgtyp, int third, out: return err; } +#else +long compat_sys_semctl(int semid, int semnum, int cmd, int arg) +{ + return do_compat_semctl(semid, semnum, cmd, arg); +} + +long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, int msgflg) +{ + compat_long_t mtype; + + if (get_user(mtype, &msgp->mtype)) + return -EFAULT; + return do_msgsnd(msqid, mtype, msgp->mtext, msgsz, msgflg); +} + +long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp, + size_t msgsz, long msgtyp, int msgflg) +{ + long err, mtype; + + err = do_msgrcv(msqid, &mtype, msgp->mtext, msgsz, msgtyp, msgflg); + if (err < 0) + goto out; + + if (put_user(mtype, &msgp->mtype)) + err = -EFAULT; + out: + return err; +} +#endif static inline int get_compat_msqid64(struct msqid64_ds *m64, struct compat_msqid64_ds __user *up64) @@ -470,6 +514,7 @@ long compat_sys_msgctl(int first, int second, void __user *uptr) return err; } +#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC long compat_sys_shmat(int first, int second, compat_uptr_t third, int version, void __user *uptr) { @@ -485,6 +530,19 @@ long compat_sys_shmat(int first, int second, compat_uptr_t third, int version, uaddr = compat_ptr(third); return put_user(raddr, uaddr); } +#else +long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg) +{ + unsigned long ret; + long err; + + err = do_shmat(shmid, compat_ptr(shmaddr), shmflg, &ret); + if (err) + return err; + force_successful_syscall_return(); + return (long)ret; +} +#endif static inline int get_compat_shmid64_ds(struct shmid64_ds *s64, struct compat_shmid64_ds __user *up64) -- cgit v1.2.3-70-g09d2 From 4a649903f91232d02284d53724b0a45728111767 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 6 Mar 2012 17:16:09 -0800 Subject: rtc: Provide flag for rtc devices that don't support UIE Richard Weinberger noticed that on some RTC hardware that doesn't support UIE mode, due to coarse granular alarms (like 1minute resolution), the current virtualized RTC support doesn't properly error out when UIE is enabled. Instead the current code queues an alarm for the next second, but it won't fire until up to a miniute later. This patch provides a generic way to flag this sort of hardware and fixes the issue on the mpc5121 where Richard noticed the problem. CC: stable@vger.kernel.org Reported-by: Richard Weinberger Tested-by: Richard Weinberger Signed-off-by: John Stultz --- drivers/rtc/interface.c | 5 +++++ drivers/rtc/rtc-mpc5121.c | 2 ++ include/linux/rtc.h | 3 ++- 3 files changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index dc87eda6581..eb415bd7649 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -458,6 +458,11 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled) if (rtc->uie_rtctimer.enabled == enabled) goto out; + if (rtc->uie_unsupported) { + err = -EINVAL; + goto out; + } + if (enabled) { struct rtc_time tm; ktime_t now, onesec; diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c index 9d3caccfc25..613447abdbe 100644 --- a/drivers/rtc/rtc-mpc5121.c +++ b/drivers/rtc/rtc-mpc5121.c @@ -360,6 +360,8 @@ static int __devinit mpc5121_rtc_probe(struct platform_device *op) &mpc5200_rtc_ops, THIS_MODULE); } + rtc->rtc->uie_unsupported = 1; + if (IS_ERR(rtc->rtc)) { err = PTR_ERR(rtc->rtc); goto out_free_irq; diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 93f4d035076..fcabfb4873c 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -202,7 +202,8 @@ struct rtc_device struct hrtimer pie_timer; /* sub second exp, so needs hrtimer */ int pie_enabled; struct work_struct irqwork; - + /* Some hardware can't support UIE mode */ + int uie_unsupported; #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL struct work_struct uie_task; -- cgit v1.2.3-70-g09d2 From d34b7d452397d16a895b9a0eddcf6b69f46074d2 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 6 Mar 2012 07:31:00 +0100 Subject: ARM: orion: spi: remove enable_clock_fix which is not used Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper Acked-by: Grant Likely --- drivers/spi/spi-orion.c | 5 ----- include/linux/spi/orion_spi.h | 1 - 2 files changed, 6 deletions(-) (limited to 'include/linux') diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 13448c832c4..e496f799b7a 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -359,11 +359,6 @@ static int orion_spi_setup(struct spi_device *spi) orion_spi = spi_master_get_devdata(spi->master); - /* Fix ac timing if required. */ - if (orion_spi->spi_info->enable_clock_fix) - orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG, - (1 << 14)); - if ((spi->max_speed_hz == 0) || (spi->max_speed_hz > orion_spi->max_speed)) spi->max_speed_hz = orion_spi->max_speed; diff --git a/include/linux/spi/orion_spi.h b/include/linux/spi/orion_spi.h index decf6d8c77b..b4d9fa6f797 100644 --- a/include/linux/spi/orion_spi.h +++ b/include/linux/spi/orion_spi.h @@ -11,7 +11,6 @@ struct orion_spi_info { u32 tclk; /* no support yet */ - u32 enable_clock_fix; }; -- cgit v1.2.3-70-g09d2 From 641cc938815dfd09f8fa1ec72deb814f0938ac33 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 15 Mar 2012 20:09:14 +0100 Subject: perf: Adding sysfs group format attribute for pmu device Adding sysfs group 'format' attribute for pmu device that contains a syntax description on how to construct raw events. The event configuration is described in following struct pefr_event_attr attributes: config config1 config2 Each sysfs attribute within the format attribute group, describes mapping of name and bitfield definition within one of above attributes. eg: "/sys/.../format/event" contains "config:0-7" "/sys/.../format/umask" contains "config:8-15" "/sys/.../format/usr" contains "config:16" the attribute value syntax is: line: config ':' bits config: 'config' | 'config1' | 'config2" bits: bits ',' bit_term | bit_term bit_term: VALUE '-' VALUE | VALUE Adding format attribute definitions for x86 cpu pmus. Acked-by: Peter Zijlstra Signed-off-by: Peter Zijlstra Signed-off-by: Jiri Olsa Link: http://lkml.kernel.org/n/tip-vhdk5y2hyype9j63prymty36@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- .../testing/sysfs-bus-event_source-devices-format | 14 +++++++++ arch/x86/kernel/cpu/perf_event.c | 7 +++++ arch/x86/kernel/cpu/perf_event.h | 1 + arch/x86/kernel/cpu/perf_event_amd.c | 18 +++++++++++ arch/x86/kernel/cpu/perf_event_intel.c | 36 ++++++++++++++++++++++ arch/x86/kernel/cpu/perf_event_p6.c | 19 ++++++++++++ include/linux/perf_event.h | 14 +++++++++ 7 files changed, 109 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-event_source-devices-format (limited to 'include/linux') diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-format b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format new file mode 100644 index 00000000000..079afc71363 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-format @@ -0,0 +1,14 @@ +Where: /sys/bus/event_source/devices//format +Date: January 2012 +Kernel Version: 3.3 +Contact: Jiri Olsa +Description: + Attribute group to describe the magic bits that go into + perf_event_attr::config[012] for a particular pmu. + Each attribute of this group defines the 'hardware' bitmask + we want to export, so that userspace can deal with sane + name/value pairs. + + Example: 'config1:1,6-10,44' + Defines contents of attribute that occupies bits 1,6-10,44 of + perf_event_attr::config1. diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 0a18d16cb58..453ac949757 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1314,6 +1314,11 @@ static void __init pmu_check_apic(void) pr_info("no hardware sampling interrupt available.\n"); } +static struct attribute_group x86_pmu_format_group = { + .name = "format", + .attrs = NULL, +}; + static int __init init_hw_perf_events(void) { struct x86_pmu_quirk *quirk; @@ -1388,6 +1393,7 @@ static int __init init_hw_perf_events(void) } x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */ + x86_pmu_format_group.attrs = x86_pmu.format_attrs; pr_info("... version: %d\n", x86_pmu.version); pr_info("... bit width: %d\n", x86_pmu.cntval_bits); @@ -1668,6 +1674,7 @@ static struct attribute_group x86_pmu_attr_group = { static const struct attribute_group *x86_pmu_attr_groups[] = { &x86_pmu_attr_group, + &x86_pmu_format_group, NULL, }; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 8484e77c211..6638aaf5449 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -339,6 +339,7 @@ struct x86_pmu { * sysfs attrs */ int attr_rdpmc; + struct attribute **format_attrs; /* * CPU Hotplug hooks diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index dd002faff7a..95e7fe1c5f0 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -404,6 +404,21 @@ static void amd_pmu_cpu_dead(int cpu) } } +PMU_FORMAT_ATTR(event, "config:0-7,32-35"); +PMU_FORMAT_ATTR(umask, "config:8-15" ); +PMU_FORMAT_ATTR(edge, "config:18" ); +PMU_FORMAT_ATTR(inv, "config:23" ); +PMU_FORMAT_ATTR(cmask, "config:24-31" ); + +static struct attribute *amd_format_attr[] = { + &format_attr_event.attr, + &format_attr_umask.attr, + &format_attr_edge.attr, + &format_attr_inv.attr, + &format_attr_cmask.attr, + NULL, +}; + static __initconst const struct x86_pmu amd_pmu = { .name = "AMD", .handle_irq = x86_pmu_handle_irq, @@ -426,6 +441,8 @@ static __initconst const struct x86_pmu amd_pmu = { .get_event_constraints = amd_get_event_constraints, .put_event_constraints = amd_put_event_constraints, + .format_attrs = amd_format_attr, + .cpu_prepare = amd_pmu_cpu_prepare, .cpu_starting = amd_pmu_cpu_starting, .cpu_dead = amd_pmu_cpu_dead, @@ -596,6 +613,7 @@ static __initconst const struct x86_pmu amd_pmu_f15h = { .cpu_dead = amd_pmu_cpu_dead, #endif .cpu_starting = amd_pmu_cpu_starting, + .format_attrs = amd_format_attr, }; __init int amd_pmu_init(void) diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 6a84e7f28f0..26b3e2fef10 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1431,6 +1431,24 @@ static void core_pmu_enable_all(int added) } } +PMU_FORMAT_ATTR(event, "config:0-7" ); +PMU_FORMAT_ATTR(umask, "config:8-15" ); +PMU_FORMAT_ATTR(edge, "config:18" ); +PMU_FORMAT_ATTR(pc, "config:19" ); +PMU_FORMAT_ATTR(any, "config:21" ); /* v3 + */ +PMU_FORMAT_ATTR(inv, "config:23" ); +PMU_FORMAT_ATTR(cmask, "config:24-31" ); + +static struct attribute *intel_arch_formats_attr[] = { + &format_attr_event.attr, + &format_attr_umask.attr, + &format_attr_edge.attr, + &format_attr_pc.attr, + &format_attr_inv.attr, + &format_attr_cmask.attr, + NULL, +}; + static __initconst const struct x86_pmu core_pmu = { .name = "core", .handle_irq = x86_pmu_handle_irq, @@ -1455,6 +1473,7 @@ static __initconst const struct x86_pmu core_pmu = { .put_event_constraints = intel_put_event_constraints, .event_constraints = intel_core_event_constraints, .guest_get_msrs = core_guest_get_msrs, + .format_attrs = intel_arch_formats_attr, }; struct intel_shared_regs *allocate_shared_regs(int cpu) @@ -1553,6 +1572,21 @@ static void intel_pmu_flush_branch_stack(void) intel_pmu_lbr_reset(); } +PMU_FORMAT_ATTR(offcore_rsp, "config1:0-63"); + +static struct attribute *intel_arch3_formats_attr[] = { + &format_attr_event.attr, + &format_attr_umask.attr, + &format_attr_edge.attr, + &format_attr_pc.attr, + &format_attr_any.attr, + &format_attr_inv.attr, + &format_attr_cmask.attr, + + &format_attr_offcore_rsp.attr, /* XXX do NHM/WSM + SNB breakout */ + NULL, +}; + static __initconst const struct x86_pmu intel_pmu = { .name = "Intel", .handle_irq = intel_pmu_handle_irq, @@ -1576,6 +1610,8 @@ static __initconst const struct x86_pmu intel_pmu = { .get_event_constraints = intel_get_event_constraints, .put_event_constraints = intel_put_event_constraints, + .format_attrs = intel_arch3_formats_attr, + .cpu_prepare = intel_pmu_cpu_prepare, .cpu_starting = intel_pmu_cpu_starting, .cpu_dying = intel_pmu_cpu_dying, diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c index c7181befecd..32bcfc7dd23 100644 --- a/arch/x86/kernel/cpu/perf_event_p6.c +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -87,6 +87,23 @@ static void p6_pmu_enable_event(struct perf_event *event) (void)checking_wrmsrl(hwc->config_base, val); } +PMU_FORMAT_ATTR(event, "config:0-7" ); +PMU_FORMAT_ATTR(umask, "config:8-15" ); +PMU_FORMAT_ATTR(edge, "config:18" ); +PMU_FORMAT_ATTR(pc, "config:19" ); +PMU_FORMAT_ATTR(inv, "config:23" ); +PMU_FORMAT_ATTR(cmask, "config:24-31" ); + +static struct attribute *intel_p6_formats_attr[] = { + &format_attr_event.attr, + &format_attr_umask.attr, + &format_attr_edge.attr, + &format_attr_pc.attr, + &format_attr_inv.attr, + &format_attr_cmask.attr, + NULL, +}; + static __initconst const struct x86_pmu p6_pmu = { .name = "p6", .handle_irq = x86_pmu_handle_irq, @@ -115,6 +132,8 @@ static __initconst const struct x86_pmu p6_pmu = { .cntval_mask = (1ULL << 32) - 1, .get_event_constraints = x86_get_event_constraints, .event_constraints = p6_event_constraints, + + .format_attrs = intel_p6_formats_attr, }; __init int p6_pmu_init(void) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index bd9f55a5958..57ae485e80f 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -550,6 +550,7 @@ struct perf_guest_info_callbacks { #include #include #include +#include #include #define PERF_MAX_STACK_DEPTH 255 @@ -1291,5 +1292,18 @@ do { \ register_cpu_notifier(&fn##_nb); \ } while (0) + +#define PMU_FORMAT_ATTR(_name, _format) \ +static ssize_t \ +_name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *page) \ +{ \ + BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE); \ + return sprintf(page, _format "\n"); \ +} \ + \ +static struct device_attribute format_attr_##_name = __ATTR_RO(_name) + #endif /* __KERNEL__ */ #endif /* _LINUX_PERF_EVENT_H */ -- cgit v1.2.3-70-g09d2 From 02b09703e7a411f80e5ec037b3abf14061a61933 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Wed, 7 Mar 2012 17:02:51 +0900 Subject: mfd: Add platform data for MAX8997 haptic driver MAX8997 device does not support haptic function of it. This patch adds platform data for for MAX8997 haptic driver. Signed-off-by: Donggeun Kim Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997.h | 53 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index fff590521e5..9d8006b4a13 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -153,6 +153,55 @@ struct max8997_led_platform_data { u8 brightness[2]; }; +enum max8997_haptic_motor_type { + MAX8997_HAPTIC_ERM, + MAX8997_HAPTIC_LRA, +}; + +enum max8997_haptic_pulse_mode { + MAX8997_EXTERNAL_MODE, + MAX8997_INTERNAL_MODE, +}; + +enum max8997_haptic_pwm_divisor { + MAX8997_PWM_DIVISOR_32, + MAX8997_PWM_DIVISOR_64, + MAX8997_PWM_DIVISOR_128, + MAX8997_PWM_DIVISOR_256, +}; + +/* + * max8997_haptic_platform_data + * @pwm_channel_id: channel number of PWM device + * valid for MAX8997_EXTERNAL_MODE + * @pwm_period: period in nano second for PWM device + * valid for MAX8997_EXTERNAL_MODE + * @type: motor type + * @mode: pulse mode + * MAX8997_EXTERNAL_MODE: external PWM device is used to control motor + * MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor + * @pwm_divisor: divisor for external PWM device + * @internal_mode_pattern: internal mode pattern for internal mode + * [0 - 3]: valid pattern number + * @pattern_cycle: the number of cycles of the waveform + * for the internal mode pattern + * [0 - 15]: available cycles + * @pattern_signal_period: period of the waveform for the internal mode pattern + * [0 - 255]: available period + */ +struct max8997_haptic_platform_data { + int pwm_channel_id; + int pwm_period; + + enum max8997_haptic_motor_type type; + enum max8997_haptic_pulse_mode mode; + enum max8997_haptic_pwm_divisor pwm_divisor; + + int internal_mode_pattern; + int pattern_cycle; + int pattern_signal_period; +}; + struct max8997_platform_data { /* IRQ */ int irq_base; @@ -192,7 +241,9 @@ struct max8997_platform_data { /* ---- MUIC ---- */ struct max8997_muic_platform_data *muic_pdata; - /* HAPTIC: Not implemented */ + /* ---- HAPTIC ---- */ + struct max8997_haptic_platform_data *haptic_pdata; + /* RTC: Not implemented */ /* ---- LED ---- */ struct max8997_led_platform_data *led_pdata; -- cgit v1.2.3-70-g09d2 From 719a42402b3abd2323c31a03bc8f03d6b8c78eaf Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 16 Mar 2012 19:36:29 +0100 Subject: mfd: Remove unused LDO supply field from WM8994 pdata It's causing confusion with the regulator level field of the same name and serves no useful function. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- arch/arm/mach-s3c64xx/mach-crag6410-module.c | 6 ++++-- include/linux/mfd/wm8994/pdata.h | 1 - 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index cd3c97e2ee7..e1ea2ffb6c0 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -16,6 +16,8 @@ #include #include +#include + #include #include #include @@ -141,8 +143,8 @@ static struct wm8994_pdata wm8994_pdata = { }, .irq_base = CODEC_IRQ_BASE, .ldo = { - { .supply = "WALLVDD" }, - { .supply = "WALLVDD" }, + { }, + { }, }, }; diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 3fb1f407d5e..4c1fb71c810 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -22,7 +22,6 @@ struct wm8994_ldo_pdata { /** GPIOs to enable regulator, 0 or less if not available */ int enable; - const char *supply; const struct regulator_init_data *init_data; }; -- cgit v1.2.3-70-g09d2 From a982362c1723464fec0414f6460684844f2638f3 Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Thu, 8 Mar 2012 14:01:57 +0100 Subject: mfd: Support for the AB8500 AB8505 variant This builds upon the changes done to support AB9540 so as also to support the AB8505 derivative of the AB8500 circuit. Signed-off-by: Bengt Jonsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 32 ++++++------- include/linux/mfd/abx500/ab8500.h | 99 ++++++++++++++++++++++----------------- 2 files changed, 72 insertions(+), 59 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index f134a6cd4b8..c637c8d2e7d 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -360,6 +360,8 @@ static int ab8500_irq_init(struct ab8500 *ab8500) if (is_ab9540(ab8500)) num_irqs = AB9540_NR_IRQS; + else if (is_ab8505(ab8500)) + num_irqs = AB8505_NR_IRQS; else num_irqs = AB8500_NR_IRQS; @@ -386,6 +388,8 @@ static void ab8500_irq_remove(struct ab8500 *ab8500) if (is_ab9540(ab8500)) num_irqs = AB9540_NR_IRQS; + else if (is_ab8505(ab8500)) + num_irqs = AB8505_NR_IRQS; else num_irqs = AB8500_NR_IRQS; @@ -545,12 +549,6 @@ static struct resource __devinitdata ab8500_charger_resources[] = { .end = AB8500_INT_USB_LINK_STATUS, .flags = IORESOURCE_IRQ, }, - { - .name = "USB_CHARGE_DET_DONE", - .start = AB8500_INT_USB_CHG_DET_DONE, - .end = AB8500_INT_USB_CHG_DET_DONE, - .flags = IORESOURCE_IRQ, - }, { .name = "VBUS_OVV", .start = AB8500_INT_VBUS_OVV, @@ -589,14 +587,8 @@ static struct resource __devinitdata ab8500_charger_resources[] = { }, { .name = "USB_CHARGER_NOT_OKR", - .start = AB8500_INT_USB_CHARGER_NOT_OK, - .end = AB8500_INT_USB_CHARGER_NOT_OK, - .flags = IORESOURCE_IRQ, - }, - { - .name = "USB_CHARGER_NOT_OKF", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .start = AB8500_INT_USB_CHARGER_NOT_OKR, + .end = AB8500_INT_USB_CHARGER_NOT_OKR, .flags = IORESOURCE_IRQ, }, { @@ -671,6 +663,12 @@ static struct resource __devinitdata ab8500_fg_resources[] = { .end = AB8500_INT_CC_INT_CALIB, .flags = IORESOURCE_IRQ, }, + { + .name = "CCEOC", + .start = AB8500_INT_CCEOC, + .end = AB8500_INT_CCEOC, + .flags = IORESOURCE_IRQ, + }, }; static struct resource __devinitdata ab8500_chargalg_resources[] = {}; @@ -685,8 +683,8 @@ static struct resource __devinitdata ab8500_debug_resources[] = { }, { .name = "IRQ_LAST", - .start = AB8500_INT_USB_CHARGER_NOT_OKF, - .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .start = AB8500_INT_XTAL32K_KO, + .end = AB8500_INT_XTAL32K_KO, .flags = IORESOURCE_IRQ, }, }; @@ -1033,7 +1031,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500, enum ab8500_version version) ab8500->chip_id & 0x0F); /* Configure AB8500 or AB9540 IRQ */ - if (is_ab9540(ab8500)) { + if (is_ab9540(ab8500) || is_ab8505(ab8500)) { ab8500->mask_size = AB9540_NUM_IRQ_REGS; ab8500->irq_reg_offset = ab9540_irq_regoffset; } else { diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 4b2df29fb85..78ed95bb47c 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -62,9 +62,9 @@ enum ab8500_version { */ /* Definitions for AB8500 and AB9540 */ /* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */ -#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 -#define AB8500_INT_UN_PLUG_TV_DET 1 -#define AB8500_INT_PLUG_TV_DET 2 +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */ +#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540 */ +#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540 */ #define AB8500_INT_TEMP_WARM 3 #define AB8500_INT_PON_KEY2DB_F 4 #define AB8500_INT_PON_KEY2DB_R 5 @@ -72,10 +72,8 @@ enum ab8500_version { #define AB8500_INT_PON_KEY1DB_R 7 /* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */ #define AB8500_INT_BATT_OVV 8 -#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 -#define AB8500_INT_MAIN_CH_PLUG_DET 11 -#define AB8500_INT_USB_ID_DET_F 12 -#define AB8500_INT_USB_ID_DET_R 13 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505 */ +#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505 */ #define AB8500_INT_VBUS_DET_F 14 #define AB8500_INT_VBUS_DET_R 15 /* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */ @@ -85,7 +83,7 @@ enum ab8500_version { #define AB8500_INT_BAT_CTRL_INDB 20 #define AB8500_INT_CH_WD_EXP 21 #define AB8500_INT_VBUS_OVV 22 -#define AB8500_INT_MAIN_CH_DROP_END 23 +#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540 */ /* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */ #define AB8500_INT_CCN_CONV_ACC 24 #define AB8500_INT_INT_AUD 25 @@ -96,7 +94,7 @@ enum ab8500_version { #define AB8500_INT_BUP_CHG_NOT_OK 30 #define AB8500_INT_BUP_CHG_OK 31 /* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */ -#define AB8500_INT_GP_HW_ADC_CONV_END 32 +#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505 */ #define AB8500_INT_ACC_DETECT_1DB_F 33 #define AB8500_INT_ACC_DETECT_1DB_R 34 #define AB8500_INT_ACC_DETECT_22DB_F 35 @@ -105,39 +103,39 @@ enum ab8500_version { #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 /* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */ -#define AB8500_INT_GPIO6R 40 -#define AB8500_INT_GPIO7R 41 -#define AB8500_INT_GPIO8R 42 -#define AB8500_INT_GPIO9R 43 +#define AB8500_INT_GPIO6R 40 /* not 8505/9540 */ +#define AB8500_INT_GPIO7R 41 /* not 8505/9540 */ +#define AB8500_INT_GPIO8R 42 /* not 8505/9540 */ +#define AB8500_INT_GPIO9R 43 /* not 8505/9540 */ #define AB8500_INT_GPIO10R 44 #define AB8500_INT_GPIO11R 45 -#define AB8500_INT_GPIO12R 46 +#define AB8500_INT_GPIO12R 46 /* not 8505 */ #define AB8500_INT_GPIO13R 47 /* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */ -#define AB8500_INT_GPIO24R 48 -#define AB8500_INT_GPIO25R 49 -#define AB8500_INT_GPIO36R 50 -#define AB8500_INT_GPIO37R 51 -#define AB8500_INT_GPIO38R 52 -#define AB8500_INT_GPIO39R 53 +#define AB8500_INT_GPIO24R 48 /* not 8505 */ +#define AB8500_INT_GPIO25R 49 /* not 8505 */ +#define AB8500_INT_GPIO36R 50 /* not 8505/9540 */ +#define AB8500_INT_GPIO37R 51 /* not 8505/9540 */ +#define AB8500_INT_GPIO38R 52 /* not 8505/9540 */ +#define AB8500_INT_GPIO39R 53 /* not 8505/9540 */ #define AB8500_INT_GPIO40R 54 #define AB8500_INT_GPIO41R 55 /* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */ -#define AB8500_INT_GPIO6F 56 -#define AB8500_INT_GPIO7F 57 -#define AB8500_INT_GPIO8F 58 -#define AB8500_INT_GPIO9F 59 +#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */ +#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */ +#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */ +#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */ #define AB8500_INT_GPIO10F 60 #define AB8500_INT_GPIO11F 61 -#define AB8500_INT_GPIO12F 62 +#define AB8500_INT_GPIO12F 62 /* not 8505 */ #define AB8500_INT_GPIO13F 63 /* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */ -#define AB8500_INT_GPIO24F 64 -#define AB8500_INT_GPIO25F 65 -#define AB8500_INT_GPIO36F 66 -#define AB8500_INT_GPIO37F 67 -#define AB8500_INT_GPIO38F 68 -#define AB8500_INT_GPIO39F 69 +#define AB8500_INT_GPIO24F 64 /* not 8505 */ +#define AB8500_INT_GPIO25F 65 /* not 8505 */ +#define AB8500_INT_GPIO36F 66 /* not 8505/9540 */ +#define AB8500_INT_GPIO37F 67 /* not 8505/9540 */ +#define AB8500_INT_GPIO38F 68 /* not 8505/9540 */ +#define AB8500_INT_GPIO39F 69 /* not 8505/9540 */ #define AB8500_INT_GPIO40F 70 #define AB8500_INT_GPIO41F 71 /* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */ @@ -154,7 +152,8 @@ enum ab8500_version { #define AB8500_INT_BTEMP_MEDIUM_HIGH 82 #define AB8500_INT_BTEMP_HIGH 83 /* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */ -#define AB8500_INT_USB_CHARGER_NOT_OK 89 +#define AB8500_INT_SRP_DETECT 88 +#define AB8500_INT_USB_CHARGER_NOT_OKR 89 #define AB8500_INT_ID_WAKEUP_R 90 #define AB8500_INT_ID_DET_R1R 92 #define AB8500_INT_ID_DET_R2R 93 @@ -166,29 +165,32 @@ enum ab8500_version { #define AB8500_INT_ID_DET_R2F 99 #define AB8500_INT_ID_DET_R3F 100 #define AB8500_INT_ID_DET_R4F 101 -#define AB8500_INT_USB_CHG_DET_DONE 102 +#define AB8500_INT_CHAUTORESTARTAFTSEC 102 +#define AB8500_INT_CHSTOPBYSEC 103 /* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */ #define AB8500_INT_USB_CH_TH_PROT_F 104 #define AB8500_INT_USB_CH_TH_PROT_R 105 -#define AB8500_INT_MAIN_CH_TH_PROT_F 106 -#define AB8500_INT_MAIN_CH_TH_PROT_R 107 -#define AB8500_INT_USB_CHARGER_NOT_OKF 111 +#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */ +#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */ +#define AB8500_INT_CHCURLIMNOHSCHIRP 109 +#define AB8500_INT_CHCURLIMHSCHIRP 110 +#define AB8500_INT_XTAL32K_KO 111 /* Definitions for AB9540 */ /* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */ #define AB9540_INT_GPIO50R 113 -#define AB9540_INT_GPIO51R 114 +#define AB9540_INT_GPIO51R 114 /* not 8505 */ #define AB9540_INT_GPIO52R 115 #define AB9540_INT_GPIO53R 116 -#define AB9540_INT_GPIO54R 117 +#define AB9540_INT_GPIO54R 117 /* not 8505 */ #define AB9540_INT_IEXT_CH_RF_BFN_R 118 #define AB9540_INT_IEXT_CH_RF_BFN_F 119 /* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */ #define AB9540_INT_GPIO50F 121 -#define AB9540_INT_GPIO51F 122 +#define AB9540_INT_GPIO51F 122 /* not 8505 */ #define AB9540_INT_GPIO52F 123 #define AB9540_INT_GPIO53F 124 -#define AB9540_INT_GPIO54F 125 +#define AB9540_INT_GPIO54F 125 /* not 8505 */ /* * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the @@ -198,6 +200,7 @@ enum ab8500_version { * which is larger. */ #define AB8500_NR_IRQS 112 +#define AB8505_NR_IRQS 128 #define AB9540_NR_IRQS 128 /* This is set to the roof of any AB8500 chip variant IRQ counts */ #define AB8500_MAX_NR_IRQS AB9540_NR_IRQS @@ -292,16 +295,28 @@ static inline int is_ab8540(struct ab8500 *ab) return ab->version == AB8500_VERSION_AB8540; } -/* include also ab8505, ab9540... */ +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +/* exclude also ab8505, ab9540... */ static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab) { return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1)); } -/* include also ab8505, ab9540... */ +/* exclude also ab8505, ab9540... */ static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab) { return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0)); } +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + #endif /* MFD_AB8500_H */ -- cgit v1.2.3-70-g09d2 From 3c3e489831b601e566f6bc47e711f5847fb93dff Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Thu, 8 Mar 2012 14:02:05 +0100 Subject: mfd: Add a prcmu_abb_write_masked routine to db8500-prcmu This patch adds driver support for the I2C read-modify-write service in the U8500 PRCMU firmware. Signed-off-by: Mattias Nilsson Reviewed-by: Jonas ABERG Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 28 +++++++++++++++++++++++++--- include/linux/mfd/dbx500-prcmu.h | 7 +++++++ 2 files changed, 32 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index a1b3464cdba..6e5a0a09c41 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2332,6 +2332,7 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(0, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -2357,16 +2358,19 @@ int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) } /** - * prcmu_abb_write() - Write register value(s) to the ABB. + * prcmu_abb_write_masked() - Write masked register value(s) to the ABB. * @slave: The I2C slave address. * @reg: The (start) register address. * @value: The value(s) to write. + * @mask: The mask(s) to use. * @size: The number of registers to write. * - * Reads register value(s) from the ABB. + * Writes masked register value(s) to the ABB. + * For each @value, only the bits set to 1 in the corresponding @mask + * will be written. The other bits are not changed. * @size has to be 1 for the current firmware version. */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size) { int r; @@ -2378,6 +2382,7 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) cpu_relax(); + writeb(~*mask, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB5)); writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP)); writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS)); writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG)); @@ -2399,6 +2404,23 @@ int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return r; } +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Writes register value(s) to the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + u8 mask = ~0; + + return prcmu_abb_write_masked(slave, reg, value, &mask, size); +} + /** * prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem */ diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index eaa99a02178..d7674eb7305 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -368,6 +368,7 @@ static inline void prcmu_get_abb_event_buffer(void __iomem **buf) int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size); int prcmu_config_clkout(u8 clkout, u8 source, u8 div); @@ -620,6 +621,12 @@ static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) return -ENOSYS; } +static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, + u8 size) +{ + return -ENOSYS; +} + static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) { return 0; -- cgit v1.2.3-70-g09d2 From bc628fd19d2d1d053b88fa225bb599be026c048b Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Thu, 8 Mar 2012 14:02:20 +0100 Subject: mfd: Make use of the ab8500 firmware read-modify-write service This patch updates the AB8500 driver to make use of the I2C read-modify-write service in the PRCMU firmware. Signed-off-by: Mattias Nilsson Reviewed-by: Mattias Wallin Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 37 +++++++++++++++++++++++-------------- drivers/mfd/ab8500-i2c.c | 15 ++++++++++++++- include/linux/mfd/abx500/ab8500.h | 6 ++++-- 3 files changed, 41 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index c637c8d2e7d..1f08704f7ae 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -201,29 +201,38 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank, u8 reg, u8 bitmask, u8 bitvalues) { int ret; - u8 data; /* put the u8 bank and u8 reg together into a an u16. * bank on higher 8 bits and reg in lower */ u16 addr = ((u16)bank) << 8 | reg; mutex_lock(&ab8500->lock); - ret = ab8500->read(ab8500, addr); - if (ret < 0) { - dev_err(ab8500->dev, "failed to read reg %#x: %d\n", - addr, ret); - goto out; - } + if (ab8500->write_masked == NULL) { + u8 data; - data = (u8)ret; - data = (~bitmask & data) | (bitmask & bitvalues); + ret = ab8500->read(ab8500, addr); + if (ret < 0) { + dev_err(ab8500->dev, "failed to read reg %#x: %d\n", + addr, ret); + goto out; + } - ret = ab8500->write(ab8500, addr, data); - if (ret < 0) - dev_err(ab8500->dev, "failed to write reg %#x: %d\n", - addr, ret); + data = (u8)ret; + data = (~bitmask & data) | (bitmask & bitvalues); + + ret = ab8500->write(ab8500, addr, data); + if (ret < 0) + dev_err(ab8500->dev, "failed to write reg %#x: %d\n", + addr, ret); - dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data); + dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, + data); + goto out; + } + ret = ab8500->write_masked(ab8500, addr, bitmask, bitvalues); + if (ret < 0) + dev_err(ab8500->dev, "failed to modify reg %#x: %d\n", addr, + ret); out: mutex_unlock(&ab8500->lock); return ret; diff --git a/drivers/mfd/ab8500-i2c.c b/drivers/mfd/ab8500-i2c.c index 70a16ae856a..b83045f102b 100644 --- a/drivers/mfd/ab8500-i2c.c +++ b/drivers/mfd/ab8500-i2c.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) { @@ -23,6 +23,18 @@ static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data) return ret; } +static int ab8500_i2c_write_masked(struct ab8500 *ab8500, u16 addr, u8 mask, + u8 data) +{ + int ret; + + ret = prcmu_abb_write_masked((u8)(addr >> 8), (u8)(addr & 0xFF), &data, + &mask, 1); + if (ret < 0) + dev_err(ab8500->dev, "prcmu i2c error %d\n", ret); + return ret; +} + static int ab8500_i2c_read(struct ab8500 *ab8500, u16 addr) { int ret; @@ -59,6 +71,7 @@ static int __devinit ab8500_i2c_probe(struct platform_device *plf) ab8500->read = ab8500_i2c_read; ab8500->write = ab8500_i2c_write; + ab8500->write_masked = ab8500_i2c_write_masked; platform_set_drvdata(plf, ab8500); diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 78ed95bb47c..3b551a1783a 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -217,6 +217,7 @@ enum ab8500_version { * @version: chip version id (e.g. ab8500 or ab9540) * @chip_id: chip revision id * @write: register write + * @write_masked: masked register write * @read: register read * @rx_buf: rx buf for SPI * @tx_buf: tx buf for SPI @@ -236,8 +237,9 @@ struct ab8500 { enum ab8500_version version; u8 chip_id; - int (*write) (struct ab8500 *a8500, u16 addr, u8 data); - int (*read) (struct ab8500 *a8500, u16 addr); + int (*write)(struct ab8500 *ab8500, u16 addr, u8 data); + int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data); + int (*read)(struct ab8500 *ab8500, u16 addr); unsigned long tx_buf[4]; unsigned long rx_buf[4]; -- cgit v1.2.3-70-g09d2 From 1b1247dd75aa5cf5fae54a3bec7280046e9c7957 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 28 Feb 2012 18:35:17 +0530 Subject: mfd: Add support for RICOH PMIC RC5T583 Ricoh power management IC RC5T583 contains is multi functional device having multiple sub devices inside this. This device has multiple dcdc/ldo regulators, gpios, interrupt controllers, on-key, RTCs, ADCs. This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc. Signed-off-by: Laxman Dewangan Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 14 ++ drivers/mfd/Makefile | 1 + drivers/mfd/rc5t583-irq.c | 408 ++++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/rc5t583.c | 386 +++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/rc5t583.h | 295 ++++++++++++++++++++++++++++++++ 5 files changed, 1104 insertions(+) create mode 100644 drivers/mfd/rc5t583-irq.c create mode 100644 drivers/mfd/rc5t583.c create mode 100644 include/linux/mfd/rc5t583.h (limited to 'include/linux') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 82da44877cd..0f593966a31 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -846,6 +846,20 @@ config MFD_INTEL_MSIC Passage) chip. This chip embeds audio, battery, GPIO, etc. devices used in Intel Medfield platforms. +config MFD_RC5T583 + bool "Ricoh RC5T583 Power Management system device" + depends on I2C && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + Select this option to get support for the RICOH583 Power + Management system device. + This driver provides common support for accessing the device + through i2c interface. The device supports multiple sub-devices + like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. + Additional drivers must be enabled in order to use the + different functionality of the device. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 27430d3e839..ea0bb809739 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -112,4 +112,5 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o +obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o diff --git a/drivers/mfd/rc5t583-irq.c b/drivers/mfd/rc5t583-irq.c new file mode 100644 index 00000000000..fa6f80fad5f --- /dev/null +++ b/drivers/mfd/rc5t583-irq.c @@ -0,0 +1,408 @@ +/* + * Interrupt driver for RICOH583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan + * + * based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#include +#include +#include +#include +#include + +enum int_type { + SYS_INT = 0x1, + DCDC_INT = 0x2, + RTC_INT = 0x4, + ADC_INT = 0x8, + GPIO_INT = 0x10, +}; + +static int gpedge_add[] = { + RC5T583_GPIO_GPEDGE2, + RC5T583_GPIO_GPEDGE2 +}; + +static int irq_en_add[] = { + RC5T583_INT_EN_SYS1, + RC5T583_INT_EN_SYS2, + RC5T583_INT_EN_DCDC, + RC5T583_INT_EN_RTC, + RC5T583_INT_EN_ADC1, + RC5T583_INT_EN_ADC2, + RC5T583_INT_EN_ADC3, + RC5T583_GPIO_EN_INT +}; + +static int irq_mon_add[] = { + RC5T583_INT_MON_SYS1, + RC5T583_INT_MON_SYS2, + RC5T583_INT_MON_DCDC, + RC5T583_INT_MON_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int irq_clr_add[] = { + RC5T583_INT_IR_SYS1, + RC5T583_INT_IR_SYS2, + RC5T583_INT_IR_DCDC, + RC5T583_INT_IR_RTC, + RC5T583_INT_IR_ADCL, + RC5T583_INT_IR_ADCH, + RC5T583_INT_IR_ADCEND, + RC5T583_INT_IR_GPIOF, + RC5T583_INT_IR_GPIOR +}; + +static int main_int_type[] = { + SYS_INT, + SYS_INT, + DCDC_INT, + RTC_INT, + ADC_INT, + ADC_INT, + ADC_INT, + GPIO_INT, + GPIO_INT, +}; + +struct rc5t583_irq_data { + u8 int_type; + u8 master_bit; + u8 int_en_bit; + u8 mask_reg_index; + int grp_index; +}; + +#define RC5T583_IRQ(_int_type, _master_bit, _grp_index, \ + _int_bit, _mask_ind) \ + { \ + .int_type = _int_type, \ + .master_bit = _master_bit, \ + .grp_index = _grp_index, \ + .int_en_bit = _int_bit, \ + .mask_reg_index = _mask_ind, \ + } + +static const struct rc5t583_irq_data rc5t583_irqs[RC5T583_MAX_IRQS] = { + [RC5T583_IRQ_ONKEY] = RC5T583_IRQ(SYS_INT, 0, 0, 0, 0), + [RC5T583_IRQ_ACOK] = RC5T583_IRQ(SYS_INT, 0, 1, 1, 0), + [RC5T583_IRQ_LIDOPEN] = RC5T583_IRQ(SYS_INT, 0, 2, 2, 0), + [RC5T583_IRQ_PREOT] = RC5T583_IRQ(SYS_INT, 0, 3, 3, 0), + [RC5T583_IRQ_CLKSTP] = RC5T583_IRQ(SYS_INT, 0, 4, 4, 0), + [RC5T583_IRQ_ONKEY_OFF] = RC5T583_IRQ(SYS_INT, 0, 5, 5, 0), + [RC5T583_IRQ_WD] = RC5T583_IRQ(SYS_INT, 0, 7, 7, 0), + [RC5T583_IRQ_EN_PWRREQ1] = RC5T583_IRQ(SYS_INT, 0, 8, 0, 1), + [RC5T583_IRQ_EN_PWRREQ2] = RC5T583_IRQ(SYS_INT, 0, 9, 1, 1), + [RC5T583_IRQ_PRE_VINDET] = RC5T583_IRQ(SYS_INT, 0, 10, 2, 1), + + [RC5T583_IRQ_DC0LIM] = RC5T583_IRQ(DCDC_INT, 1, 0, 0, 2), + [RC5T583_IRQ_DC1LIM] = RC5T583_IRQ(DCDC_INT, 1, 1, 1, 2), + [RC5T583_IRQ_DC2LIM] = RC5T583_IRQ(DCDC_INT, 1, 2, 2, 2), + [RC5T583_IRQ_DC3LIM] = RC5T583_IRQ(DCDC_INT, 1, 3, 3, 2), + + [RC5T583_IRQ_CTC] = RC5T583_IRQ(RTC_INT, 2, 0, 0, 3), + [RC5T583_IRQ_YALE] = RC5T583_IRQ(RTC_INT, 2, 5, 5, 3), + [RC5T583_IRQ_DALE] = RC5T583_IRQ(RTC_INT, 2, 6, 6, 3), + [RC5T583_IRQ_WALE] = RC5T583_IRQ(RTC_INT, 2, 7, 7, 3), + + [RC5T583_IRQ_AIN1L] = RC5T583_IRQ(ADC_INT, 3, 0, 0, 4), + [RC5T583_IRQ_AIN2L] = RC5T583_IRQ(ADC_INT, 3, 1, 1, 4), + [RC5T583_IRQ_AIN3L] = RC5T583_IRQ(ADC_INT, 3, 2, 2, 4), + [RC5T583_IRQ_VBATL] = RC5T583_IRQ(ADC_INT, 3, 3, 3, 4), + [RC5T583_IRQ_VIN3L] = RC5T583_IRQ(ADC_INT, 3, 4, 4, 4), + [RC5T583_IRQ_VIN8L] = RC5T583_IRQ(ADC_INT, 3, 5, 5, 4), + [RC5T583_IRQ_AIN1H] = RC5T583_IRQ(ADC_INT, 3, 6, 0, 5), + [RC5T583_IRQ_AIN2H] = RC5T583_IRQ(ADC_INT, 3, 7, 1, 5), + [RC5T583_IRQ_AIN3H] = RC5T583_IRQ(ADC_INT, 3, 8, 2, 5), + [RC5T583_IRQ_VBATH] = RC5T583_IRQ(ADC_INT, 3, 9, 3, 5), + [RC5T583_IRQ_VIN3H] = RC5T583_IRQ(ADC_INT, 3, 10, 4, 5), + [RC5T583_IRQ_VIN8H] = RC5T583_IRQ(ADC_INT, 3, 11, 5, 5), + [RC5T583_IRQ_ADCEND] = RC5T583_IRQ(ADC_INT, 3, 12, 0, 6), + + [RC5T583_IRQ_GPIO0] = RC5T583_IRQ(GPIO_INT, 4, 0, 0, 7), + [RC5T583_IRQ_GPIO1] = RC5T583_IRQ(GPIO_INT, 4, 1, 1, 7), + [RC5T583_IRQ_GPIO2] = RC5T583_IRQ(GPIO_INT, 4, 2, 2, 7), + [RC5T583_IRQ_GPIO3] = RC5T583_IRQ(GPIO_INT, 4, 3, 3, 7), + [RC5T583_IRQ_GPIO4] = RC5T583_IRQ(GPIO_INT, 4, 4, 4, 7), + [RC5T583_IRQ_GPIO5] = RC5T583_IRQ(GPIO_INT, 4, 5, 5, 7), + [RC5T583_IRQ_GPIO6] = RC5T583_IRQ(GPIO_INT, 4, 6, 6, 7), + [RC5T583_IRQ_GPIO7] = RC5T583_IRQ(GPIO_INT, 4, 7, 7, 7), +}; + +static void rc5t583_irq_lock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + mutex_lock(&rc5t583->irq_lock); +} + +static void rc5t583_irq_unmask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] |= 1 << data->grp_index; + rc5t583->intc_inten_reg |= 1 << data->master_bit; + rc5t583->irq_en_reg[data->mask_reg_index] |= 1 << data->int_en_bit; +} + +static void rc5t583_irq_mask(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + + rc5t583->group_irq_en[data->grp_index] &= ~(1 << data->grp_index); + if (!rc5t583->group_irq_en[data->grp_index]) + rc5t583->intc_inten_reg &= ~(1 << data->master_bit); + + rc5t583->irq_en_reg[data->mask_reg_index] &= ~(1 << data->int_en_bit); +} + +static int rc5t583_irq_set_type(struct irq_data *irq_data, unsigned int type) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - rc5t583->irq_base; + const struct rc5t583_irq_data *data = &rc5t583_irqs[__irq]; + int val = 0; + int gpedge_index; + int gpedge_bit_pos; + + /* Supporting only trigger level inetrrupt */ + if ((data->int_type & GPIO_INT) && (type & IRQ_TYPE_EDGE_BOTH)) { + gpedge_index = data->int_en_bit / 4; + gpedge_bit_pos = data->int_en_bit % 4; + + if (type & IRQ_TYPE_EDGE_FALLING) + val |= 0x2; + + if (type & IRQ_TYPE_EDGE_RISING) + val |= 0x1; + + rc5t583->gpedge_reg[gpedge_index] &= ~(3 << gpedge_bit_pos); + rc5t583->gpedge_reg[gpedge_index] |= (val << gpedge_bit_pos); + rc5t583_irq_unmask(irq_data); + return 0; + } + return -EINVAL; +} + +static void rc5t583_irq_sync_unlock(struct irq_data *irq_data) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(rc5t583->gpedge_reg); i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + for (i = 0; i < ARRAY_SIZE(rc5t583->irq_en_reg); i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, + rc5t583->intc_inten_reg); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + mutex_unlock(&rc5t583->irq_lock); +} +#ifdef CONFIG_PM_SLEEP +static int rc5t583_irq_set_wake(struct irq_data *irq_data, unsigned int on) +{ + struct rc5t583 *rc5t583 = irq_data_get_irq_chip_data(irq_data); + return irq_set_irq_wake(rc5t583->chip_irq, on); +} +#else +#define rc5t583_irq_set_wake NULL +#endif + +static irqreturn_t rc5t583_irq(int irq, void *data) +{ + struct rc5t583 *rc5t583 = data; + uint8_t int_sts[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t master_int; + int i; + int ret; + unsigned int rtc_int_sts = 0; + + /* Clear the status */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) + int_sts[i] = 0; + + ret = rc5t583_read(rc5t583->dev, RC5T583_INTC_INTMON, &master_int); + if (ret < 0) { + dev_err(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + RC5T583_INTC_INTMON, ret); + return IRQ_HANDLED; + } + + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; ++i) { + if (!(master_int & main_int_type[i])) + continue; + + ret = rc5t583_read(rc5t583->dev, irq_mon_add[i], &int_sts[i]); + if (ret < 0) { + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_mon_add[i], ret); + int_sts[i] = 0; + continue; + } + + if (main_int_type[i] & RTC_INT) { + rtc_int_sts = 0; + if (int_sts[i] & 0x1) + rtc_int_sts |= BIT(6); + if (int_sts[i] & 0x2) + rtc_int_sts |= BIT(7); + if (int_sts[i] & 0x4) + rtc_int_sts |= BIT(0); + if (int_sts[i] & 0x8) + rtc_int_sts |= BIT(5); + } + + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], + ~int_sts[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in reading reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + + if (main_int_type[i] & RTC_INT) + int_sts[i] = rtc_int_sts; + } + + /* Merge gpio interrupts for rising and falling case*/ + int_sts[7] |= int_sts[8]; + + /* Call interrupt handler if enabled */ + for (i = 0; i < RC5T583_MAX_IRQS; ++i) { + const struct rc5t583_irq_data *data = &rc5t583_irqs[i]; + if ((int_sts[data->mask_reg_index] & (1 << data->int_en_bit)) && + (rc5t583->group_irq_en[data->master_bit] & + (1 << data->grp_index))) + handle_nested_irq(rc5t583->irq_base + i); + } + + return IRQ_HANDLED; +} + +static struct irq_chip rc5t583_irq_chip = { + .name = "rc5t583-irq", + .irq_mask = rc5t583_irq_mask, + .irq_unmask = rc5t583_irq_unmask, + .irq_bus_lock = rc5t583_irq_lock, + .irq_bus_sync_unlock = rc5t583_irq_sync_unlock, + .irq_set_type = rc5t583_irq_set_type, + .irq_set_wake = rc5t583_irq_set_wake, +}; + +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_warn(rc5t583->dev, "No interrupt support on IRQ base\n"); + return -EINVAL; + } + + mutex_init(&rc5t583->irq_lock); + + /* Initailize all int register to 0 */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_en_add[i], + rc5t583->irq_en_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_en_add[i], ret); + } + + for (i = 0; i < RC5T583_MAX_GPEDGE_REG; i++) { + ret = rc5t583_write(rc5t583->dev, gpedge_add[i], + rc5t583->gpedge_reg[i]); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + gpedge_add[i], ret); + } + + ret = rc5t583_write(rc5t583->dev, RC5T583_INTC_INTEN, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + RC5T583_INTC_INTEN, ret); + + /* Clear all interrupts in case they woke up active. */ + for (i = 0; i < RC5T583_MAX_INTERRUPT_MASK_REGS; i++) { + ret = rc5t583_write(rc5t583->dev, irq_clr_add[i], 0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + irq_clr_add[i], ret); + } + + rc5t583->irq_base = irq_base; + rc5t583->chip_irq = irq; + + for (i = 0; i < RC5T583_MAX_IRQS; i++) { + int __irq = i + rc5t583->irq_base; + irq_set_chip_data(__irq, rc5t583); + irq_set_chip_and_handler(__irq, &rc5t583_irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, rc5t583_irq, IRQF_ONESHOT, + "rc5t583", rc5t583); + if (ret < 0) + dev_err(rc5t583->dev, + "Error in registering interrupt error: %d\n", ret); + return ret; +} + +int rc5t583_irq_exit(struct rc5t583 *rc5t583) +{ + if (rc5t583->chip_irq) + free_irq(rc5t583->chip_irq, rc5t583); + return 0; +} diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c new file mode 100644 index 00000000000..99ef944c621 --- /dev/null +++ b/drivers/mfd/rc5t583.c @@ -0,0 +1,386 @@ +/* + * Core driver access RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RICOH_ONOFFSEL_REG 0x10 +#define RICOH_SWCTL_REG 0x5E + +struct deepsleep_control_data { + u8 reg_add; + u8 ds_pos_bit; +}; + +#define DEEPSLEEP_INIT(_id, _reg, _pos) \ + { \ + .reg_add = RC5T583_##_reg, \ + .ds_pos_bit = _pos, \ + } + +static struct deepsleep_control_data deepsleep_data[] = { + DEEPSLEEP_INIT(DC0, SLPSEQ1, 0), + DEEPSLEEP_INIT(DC1, SLPSEQ1, 4), + DEEPSLEEP_INIT(DC2, SLPSEQ2, 0), + DEEPSLEEP_INIT(DC3, SLPSEQ2, 4), + DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0), + DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4), + DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0), + DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4), + DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0), + DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4), + DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0), + DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4), + DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0), + DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4), + DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0), + DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4), + DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0), + DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4), + DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0), + DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4), + DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0), + DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4), +}; + +#define EXT_PWR_REQ \ + (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL) + +static struct mfd_cell rc5t583_subdevs[] = { + {.name = "rc5t583-regulator",}, + {.name = "rc5t583-rtc", }, + {.name = "rc5t583-key", } +}; + +int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + +static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, + int id, int ext_pwr, int slots) +{ + int ret; + uint8_t sleepseq_val; + unsigned int en_bit; + unsigned int slot_bit; + + if (id == RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id); + return -EINVAL; + } + + en_bit = deepsleep_data[id].ds_pos_bit; + slot_bit = en_bit + 1; + ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in reading reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + sleepseq_val &= ~(0xF << en_bit); + sleepseq_val |= BIT(en_bit); + sleepseq_val |= ((slots & 0x7) << slot_bit); + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1)); + if (ret < 0) { + dev_err(dev, "Error in updating the 0x%02x register\n", + RICOH_ONOFFSEL_REG); + return ret; + } + + ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val); + if (ret < 0) { + dev_err(dev, "Error in writing reg 0x%x\n", + deepsleep_data[id].reg_add); + return ret; + } + + if (id == RC5T583_DS_LDO4) { + ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1); + if (ret < 0) + dev_err(dev, "Error in writing reg 0x%x\n", + RICOH_SWCTL_REG); + } + return ret; +} + +static int __rc5t583_set_ext_pwrreq2_control(struct device *dev, + int id, int ext_pwr) +{ + int ret; + + if (id != RC5T583_DS_DC0) { + dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id); + return -EINVAL; + } + + ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2)); + if (ret < 0) + dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n"); + return ret; +} + +int rc5t583_ext_power_req_config(struct device *dev, int ds_id, + int ext_pwr_req, int deepsleep_slot_nr) +{ + if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ) + return -EINVAL; + + if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL) + return __rc5t583_set_ext_pwrreq1_control(dev, ds_id, + ext_pwr_req, deepsleep_slot_nr); + + if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL) + return __rc5t583_set_ext_pwrreq2_control(dev, + ds_id, ext_pwr_req); + return 0; +} + +static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, + struct rc5t583_platform_data *pdata) +{ + int ret; + int i; + uint8_t on_off_val = 0; + + /* Clear ONOFFSEL register */ + if (pdata->enable_shutdown) + on_off_val = 0x1; + + ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_ONOFFSEL_REG, ret); + + ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n", + RICOH_SWCTL_REG, ret); + + /* Clear sleep sequence register */ + for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) { + ret = rc5t583_write(rc5t583->dev, i, 0x0); + if (ret < 0) + dev_warn(rc5t583->dev, + "Error in writing reg 0x%02x error: %d\n", + i, ret); + } + return 0; +} + +static bool volatile_reg(struct device *dev, unsigned int reg) +{ + /* Enable caching in interrupt registers */ + switch (reg) { + case RC5T583_INT_EN_SYS1: + case RC5T583_INT_EN_SYS2: + case RC5T583_INT_EN_DCDC: + case RC5T583_INT_EN_RTC: + case RC5T583_INT_EN_ADC1: + case RC5T583_INT_EN_ADC2: + case RC5T583_INT_EN_ADC3: + case RC5T583_GPIO_GPEDGE1: + case RC5T583_GPIO_GPEDGE2: + case RC5T583_GPIO_EN_INT: + return false; + + case RC5T583_GPIO_MON_IOIN: + /* This is gpio input register */ + return true; + + default: + /* Enable caching in gpio registers */ + if ((reg >= RC5T583_GPIO_IOSEL) && + (reg <= RC5T583_GPIO_GPOFUNC)) + return false; + + /* Enable caching in sleep seq registers */ + if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11)) + return false; + + /* Enable caching of regulator registers */ + if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL)) + return false; + if ((reg >= RC5T583_REG_LDOEN1) && + (reg <= RC5T583_REG_LDO9DAC_DS)) + return false; + + break; + } + + return true; +} + +static const struct regmap_config rc5t583_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = volatile_reg, + .max_register = RC5T583_MAX_REGS, + .num_reg_defaults_raw = RC5T583_MAX_REGS, + .cache_type = REGCACHE_RBTREE, +}; + +static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rc5t583 *rc5t583; + struct rc5t583_platform_data *pdata = i2c->dev.platform_data; + int ret; + bool irq_init_success = false; + + if (!pdata) { + dev_err(&i2c->dev, "Err: Platform data not found\n"); + return -EINVAL; + } + + rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL); + if (!rc5t583) { + dev_err(&i2c->dev, "Memory allocation failed\n"); + return -ENOMEM; + } + + rc5t583->dev = &i2c->dev; + i2c_set_clientdata(i2c, rc5t583); + + rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config); + if (IS_ERR(rc5t583->regmap)) { + ret = PTR_ERR(rc5t583->regmap); + dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret); + return ret; + } + + ret = rc5t583_clear_ext_power_req(rc5t583, pdata); + if (ret < 0) + goto err_irq_init; + + if (i2c->irq) { + ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base); + /* Still continue with waring if irq init fails */ + if (ret) + dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret); + else + irq_init_success = true; + } + + ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, + ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + if (ret) { + dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); + goto err_add_devs; + } + + return 0; + +err_add_devs: + if (irq_init_success) + rc5t583_irq_exit(rc5t583); +err_irq_init: + regmap_exit(rc5t583->regmap); + return ret; +} + +static int __devexit rc5t583_i2c_remove(struct i2c_client *i2c) +{ + struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c); + + mfd_remove_devices(rc5t583->dev); + rc5t583_irq_exit(rc5t583); + regmap_exit(rc5t583->regmap); + return 0; +} + +static const struct i2c_device_id rc5t583_i2c_id[] = { + {.name = "rc5t583", .driver_data = 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id); + +static struct i2c_driver rc5t583_i2c_driver = { + .driver = { + .name = "rc5t583", + .owner = THIS_MODULE, + }, + .probe = rc5t583_i2c_probe, + .remove = __devexit_p(rc5t583_i2c_remove), + .id_table = rc5t583_i2c_id, +}; + +static int __init rc5t583_i2c_init(void) +{ + return i2c_add_driver(&rc5t583_i2c_driver); +} +subsys_initcall(rc5t583_i2c_init); + +static void __exit rc5t583_i2c_exit(void) +{ + i2c_del_driver(&rc5t583_i2c_driver); +} + +module_exit(rc5t583_i2c_exit); + +MODULE_AUTHOR("Laxman Dewangan "); +MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h new file mode 100644 index 00000000000..a2c61609d21 --- /dev/null +++ b/include/linux/mfd/rc5t583.h @@ -0,0 +1,295 @@ +/* + * Core driver interface to access RICOH_RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan + * + * Based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __LINUX_MFD_RC5T583_H +#define __LINUX_MFD_RC5T583_H + +#include +#include + +#define RC5T583_MAX_REGS 0xF8 + +/* Maximum number of main interrupts */ +#define MAX_MAIN_INTERRUPT 5 +#define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_MASK_REGS 9 + +/* Interrupt enable register */ +#define RC5T583_INT_EN_SYS1 0x19 +#define RC5T583_INT_EN_SYS2 0x1D +#define RC5T583_INT_EN_DCDC 0x41 +#define RC5T583_INT_EN_RTC 0xED +#define RC5T583_INT_EN_ADC1 0x90 +#define RC5T583_INT_EN_ADC2 0x91 +#define RC5T583_INT_EN_ADC3 0x92 + +/* Interrupt status registers (monitor regs in Ricoh)*/ +#define RC5T583_INTC_INTPOL 0xAD +#define RC5T583_INTC_INTEN 0xAE +#define RC5T583_INTC_INTMON 0xAF + +#define RC5T583_INT_MON_GRP 0xAF +#define RC5T583_INT_MON_SYS1 0x1B +#define RC5T583_INT_MON_SYS2 0x1F +#define RC5T583_INT_MON_DCDC 0x43 +#define RC5T583_INT_MON_RTC 0xEE + +/* Interrupt clearing registers */ +#define RC5T583_INT_IR_SYS1 0x1A +#define RC5T583_INT_IR_SYS2 0x1E +#define RC5T583_INT_IR_DCDC 0x42 +#define RC5T583_INT_IR_RTC 0xEE +#define RC5T583_INT_IR_ADCL 0x94 +#define RC5T583_INT_IR_ADCH 0x95 +#define RC5T583_INT_IR_ADCEND 0x96 +#define RC5T583_INT_IR_GPIOR 0xA9 +#define RC5T583_INT_IR_GPIOF 0xAA + +/* Sleep sequence registers */ +#define RC5T583_SLPSEQ1 0x21 +#define RC5T583_SLPSEQ2 0x22 +#define RC5T583_SLPSEQ3 0x23 +#define RC5T583_SLPSEQ4 0x24 +#define RC5T583_SLPSEQ5 0x25 +#define RC5T583_SLPSEQ6 0x26 +#define RC5T583_SLPSEQ7 0x27 +#define RC5T583_SLPSEQ8 0x28 +#define RC5T583_SLPSEQ9 0x29 +#define RC5T583_SLPSEQ10 0x2A +#define RC5T583_SLPSEQ11 0x2B + +/* Regulator registers */ +#define RC5T583_REG_DC0CTL 0x30 +#define RC5T583_REG_DC0DAC 0x31 +#define RC5T583_REG_DC0LATCTL 0x32 +#define RC5T583_REG_SR0CTL 0x33 + +#define RC5T583_REG_DC1CTL 0x34 +#define RC5T583_REG_DC1DAC 0x35 +#define RC5T583_REG_DC1LATCTL 0x36 +#define RC5T583_REG_SR1CTL 0x37 + +#define RC5T583_REG_DC2CTL 0x38 +#define RC5T583_REG_DC2DAC 0x39 +#define RC5T583_REG_DC2LATCTL 0x3A +#define RC5T583_REG_SR2CTL 0x3B + +#define RC5T583_REG_DC3CTL 0x3C +#define RC5T583_REG_DC3DAC 0x3D +#define RC5T583_REG_DC3LATCTL 0x3E +#define RC5T583_REG_SR3CTL 0x3F + + +#define RC5T583_REG_LDOEN1 0x50 +#define RC5T583_REG_LDOEN2 0x51 +#define RC5T583_REG_LDODIS1 0x52 +#define RC5T583_REG_LDODIS2 0x53 + +#define RC5T583_REG_LDO0DAC 0x54 +#define RC5T583_REG_LDO1DAC 0x55 +#define RC5T583_REG_LDO2DAC 0x56 +#define RC5T583_REG_LDO3DAC 0x57 +#define RC5T583_REG_LDO4DAC 0x58 +#define RC5T583_REG_LDO5DAC 0x59 +#define RC5T583_REG_LDO6DAC 0x5A +#define RC5T583_REG_LDO7DAC 0x5B +#define RC5T583_REG_LDO8DAC 0x5C +#define RC5T583_REG_LDO9DAC 0x5D + +#define RC5T583_REG_DC0DAC_DS 0x60 +#define RC5T583_REG_DC1DAC_DS 0x61 +#define RC5T583_REG_DC2DAC_DS 0x62 +#define RC5T583_REG_DC3DAC_DS 0x63 + +#define RC5T583_REG_LDO0DAC_DS 0x64 +#define RC5T583_REG_LDO1DAC_DS 0x65 +#define RC5T583_REG_LDO2DAC_DS 0x66 +#define RC5T583_REG_LDO3DAC_DS 0x67 +#define RC5T583_REG_LDO4DAC_DS 0x68 +#define RC5T583_REG_LDO5DAC_DS 0x69 +#define RC5T583_REG_LDO6DAC_DS 0x6A +#define RC5T583_REG_LDO7DAC_DS 0x6B +#define RC5T583_REG_LDO8DAC_DS 0x6C +#define RC5T583_REG_LDO9DAC_DS 0x6D + +/* GPIO register base address */ +#define RC5T583_GPIO_IOSEL 0xA0 +#define RC5T583_GPIO_PDEN 0xA1 +#define RC5T583_GPIO_IOOUT 0xA2 +#define RC5T583_GPIO_PGSEL 0xA3 +#define RC5T583_GPIO_GPINV 0xA4 +#define RC5T583_GPIO_GPDEB 0xA5 +#define RC5T583_GPIO_GPEDGE1 0xA6 +#define RC5T583_GPIO_GPEDGE2 0xA7 +#define RC5T583_GPIO_EN_INT 0xA8 +#define RC5T583_GPIO_MON_IOIN 0xAB +#define RC5T583_GPIO_GPOFUNC 0xAC + +/* RICOH_RC5T583 IRQ definitions */ +enum { + RC5T583_IRQ_ONKEY, + RC5T583_IRQ_ACOK, + RC5T583_IRQ_LIDOPEN, + RC5T583_IRQ_PREOT, + RC5T583_IRQ_CLKSTP, + RC5T583_IRQ_ONKEY_OFF, + RC5T583_IRQ_WD, + RC5T583_IRQ_EN_PWRREQ1, + RC5T583_IRQ_EN_PWRREQ2, + RC5T583_IRQ_PRE_VINDET, + + RC5T583_IRQ_DC0LIM, + RC5T583_IRQ_DC1LIM, + RC5T583_IRQ_DC2LIM, + RC5T583_IRQ_DC3LIM, + + RC5T583_IRQ_CTC, + RC5T583_IRQ_YALE, + RC5T583_IRQ_DALE, + RC5T583_IRQ_WALE, + + RC5T583_IRQ_AIN1L, + RC5T583_IRQ_AIN2L, + RC5T583_IRQ_AIN3L, + RC5T583_IRQ_VBATL, + RC5T583_IRQ_VIN3L, + RC5T583_IRQ_VIN8L, + RC5T583_IRQ_AIN1H, + RC5T583_IRQ_AIN2H, + RC5T583_IRQ_AIN3H, + RC5T583_IRQ_VBATH, + RC5T583_IRQ_VIN3H, + RC5T583_IRQ_VIN8H, + RC5T583_IRQ_ADCEND, + + RC5T583_IRQ_GPIO0, + RC5T583_IRQ_GPIO1, + RC5T583_IRQ_GPIO2, + RC5T583_IRQ_GPIO3, + RC5T583_IRQ_GPIO4, + RC5T583_IRQ_GPIO5, + RC5T583_IRQ_GPIO6, + RC5T583_IRQ_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_IRQS, +}; + +/* Ricoh583 gpio definitions */ +enum { + RC5T583_GPIO0, + RC5T583_GPIO1, + RC5T583_GPIO2, + RC5T583_GPIO3, + RC5T583_GPIO4, + RC5T583_GPIO5, + RC5T583_GPIO6, + RC5T583_GPIO7, + + /* Should be last entry */ + RC5T583_MAX_GPIO, +}; + +enum { + RC5T583_DS_NONE, + RC5T583_DS_DC0, + RC5T583_DS_DC1, + RC5T583_DS_DC2, + RC5T583_DS_DC3, + RC5T583_DS_LDO0, + RC5T583_DS_LDO1, + RC5T583_DS_LDO2, + RC5T583_DS_LDO3, + RC5T583_DS_LDO4, + RC5T583_DS_LDO5, + RC5T583_DS_LDO6, + RC5T583_DS_LDO7, + RC5T583_DS_LDO8, + RC5T583_DS_LDO9, + RC5T583_DS_PSO0, + RC5T583_DS_PSO1, + RC5T583_DS_PSO2, + RC5T583_DS_PSO3, + RC5T583_DS_PSO4, + RC5T583_DS_PSO5, + RC5T583_DS_PSO6, + RC5T583_DS_PSO7, + + /* Should be last entry */ + RC5T583_DS_MAX, +}; + +/* + * Ricoh pmic RC5T583 supports sleep through two external controls. + * The output of gpios and regulator can be enable/disable through + * this external signals. + */ +enum { + RC5T583_EXT_PWRREQ1_CONTROL = 0x1, + RC5T583_EXT_PWRREQ2_CONTROL = 0x2, +}; + +struct rc5t583 { + struct device *dev; + struct regmap *regmap; + int chip_irq; + int irq_base; + struct mutex irq_lock; + unsigned long group_irq_en[MAX_MAIN_INTERRUPT]; + + /* For main interrupt bits in INTC */ + uint8_t intc_inten_reg; + + /* For group interrupt bits and address */ + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + + /* For gpio edge */ + uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; +}; + +/* + * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu. + * The board specific data is provided through this structure. + * @irq_base: Irq base number on which this device registers their interrupts. + * @enable_shutdown: Enable shutdown through the input pin "shutdown". + */ + +struct rc5t583_platform_data { + int irq_base; + bool enable_shutdown; +}; + +int rc5t583_write(struct device *dev, u8 reg, uint8_t val); +int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); +int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask); +int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask); +int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, + int ext_pwr_req, int deepsleep_slot_nr); +int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); +int rc5t583_irq_exit(struct rc5t583 *rc5t583); + +#endif -- cgit v1.2.3-70-g09d2 From d902d0d18c50fe195c66e60c615cfa0b81169454 Mon Sep 17 00:00:00 2001 From: Mattias Nilsson Date: Thu, 15 Mar 2012 19:50:26 +0100 Subject: mfd: Remove obsolete hwacc implementation for db8500-prmcu This patch removes the obsolete hwacc implementation in the DB8500 PRCMU driver. Signed-off-by: Mattias Nilsson Reviewed-by: Jonas Aberg Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 155 --------------------------------------- include/linux/mfd/db8500-prcmu.h | 43 ----------- 2 files changed, 198 deletions(-) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 6e5a0a09c41..09fd6a39d7f 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -516,35 +516,6 @@ static struct dsiescclk dsiescclk[3] = { } }; -static struct regulator *hwacc_regulator[NUM_HW_ACC]; -static struct regulator *hwacc_ret_regulator[NUM_HW_ACC]; - -static bool hwacc_enabled[NUM_HW_ACC]; -static bool hwacc_ret_enabled[NUM_HW_ACC]; - -static const char *hwacc_regulator_name[NUM_HW_ACC] = { - [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp", - [HW_ACC_SVAPIPE] = "hwacc-sva-pipe", - [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp", - [HW_ACC_SIAPIPE] = "hwacc-sia-pipe", - [HW_ACC_SGA] = "hwacc-sga", - [HW_ACC_B2R2] = "hwacc-b2r2", - [HW_ACC_MCDE] = "hwacc-mcde", - [HW_ACC_ESRAM1] = "hwacc-esram1", - [HW_ACC_ESRAM2] = "hwacc-esram2", - [HW_ACC_ESRAM3] = "hwacc-esram3", - [HW_ACC_ESRAM4] = "hwacc-esram4", -}; - -static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = { - [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret", - [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret", - [HW_ACC_ESRAM1] = "hwacc-esram1-ret", - [HW_ACC_ESRAM2] = "hwacc-esram2-ret", - [HW_ACC_ESRAM3] = "hwacc-esram3-ret", - [HW_ACC_ESRAM4] = "hwacc-esram4-ret", -}; - /* * Used by MCDE to setup all necessary PRCMU registers */ @@ -1294,132 +1265,6 @@ static int request_pll(u8 clock, bool enable) return r; } -/** - * prcmu_set_hwacc - set the power state of a h/w accelerator - * @hwacc_dev: The hardware accelerator (enum hw_acc_dev). - * @state: The new power state (enum hw_acc_state). - * - * This function sets the power state of a hardware accelerator. - * This function should not be called from interrupt context. - * - * NOTE! Deprecated, to be removed when all users switched over to use the - * regulator framework API. - */ -int prcmu_set_hwacc(u16 hwacc_dev, u8 state) -{ - int r = 0; - bool ram_retention = false; - bool enable, enable_ret; - - /* check argument */ - BUG_ON(hwacc_dev >= NUM_HW_ACC); - - /* get state of switches */ - enable = hwacc_enabled[hwacc_dev]; - enable_ret = hwacc_ret_enabled[hwacc_dev]; - - /* set flag if retention is possible */ - switch (hwacc_dev) { - case HW_ACC_SVAMMDSP: - case HW_ACC_SIAMMDSP: - case HW_ACC_ESRAM1: - case HW_ACC_ESRAM2: - case HW_ACC_ESRAM3: - case HW_ACC_ESRAM4: - ram_retention = true; - break; - } - - /* check argument */ - BUG_ON(state > HW_ON); - BUG_ON(state == HW_OFF_RAMRET && !ram_retention); - - /* modify enable flags */ - switch (state) { - case HW_OFF: - enable_ret = false; - enable = false; - break; - case HW_ON: - enable = true; - break; - case HW_OFF_RAMRET: - enable_ret = true; - enable = false; - break; - } - - /* get regulator (lazy) */ - if (hwacc_regulator[hwacc_dev] == NULL) { - hwacc_regulator[hwacc_dev] = regulator_get(NULL, - hwacc_regulator_name[hwacc_dev]); - if (IS_ERR(hwacc_regulator[hwacc_dev])) { - pr_err("prcmu: failed to get supply %s\n", - hwacc_regulator_name[hwacc_dev]); - r = PTR_ERR(hwacc_regulator[hwacc_dev]); - goto out; - } - } - - if (ram_retention) { - if (hwacc_ret_regulator[hwacc_dev] == NULL) { - hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL, - hwacc_ret_regulator_name[hwacc_dev]); - if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) { - pr_err("prcmu: failed to get supply %s\n", - hwacc_ret_regulator_name[hwacc_dev]); - r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]); - goto out; - } - } - } - - /* set regulators */ - if (ram_retention) { - if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) { - r = regulator_enable(hwacc_ret_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: ret enable failed\n"); - goto out; - } - hwacc_ret_enabled[hwacc_dev] = true; - } - } - - if (enable && !hwacc_enabled[hwacc_dev]) { - r = regulator_enable(hwacc_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: enable failed\n"); - goto out; - } - hwacc_enabled[hwacc_dev] = true; - } - - if (!enable && hwacc_enabled[hwacc_dev]) { - r = regulator_disable(hwacc_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: disable failed\n"); - goto out; - } - hwacc_enabled[hwacc_dev] = false; - } - - if (ram_retention) { - if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) { - r = regulator_disable(hwacc_ret_regulator[hwacc_dev]); - if (r < 0) { - pr_err("prcmu_set_hwacc: ret disable failed\n"); - goto out; - } - hwacc_ret_enabled[hwacc_dev] = false; - } - } - -out: - return r; -} -EXPORT_SYMBOL(prcmu_set_hwacc); - /** * db8500_prcmu_set_epod - set the state of a EPOD (power domain) * @epod_id: The EPOD to set diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 048a534fde3..a220905337b 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -438,43 +438,6 @@ enum auto_enable { /* End of file previously known as prcmu-fw-defs_v1.h */ -/** - * enum hw_acc_dev - enum for hw accelerators - * @HW_ACC_SVAMMDSP: for SVAMMDSP - * @HW_ACC_SVAPIPE: for SVAPIPE - * @HW_ACC_SIAMMDSP: for SIAMMDSP - * @HW_ACC_SIAPIPE: for SIAPIPE - * @HW_ACC_SGA: for SGA - * @HW_ACC_B2R2: for B2R2 - * @HW_ACC_MCDE: for MCDE - * @HW_ACC_ESRAM1: for ESRAM1 - * @HW_ACC_ESRAM2: for ESRAM2 - * @HW_ACC_ESRAM3: for ESRAM3 - * @HW_ACC_ESRAM4: for ESRAM4 - * @NUM_HW_ACC: number of hardware accelerators - * - * Different hw accelerators which can be turned ON/ - * OFF or put into retention (MMDSPs and ESRAMs). - * Used with EPOD API. - * - * NOTE! Deprecated, to be removed when all users switched over to use the - * regulator API. - */ -enum hw_acc_dev { - HW_ACC_SVAMMDSP, - HW_ACC_SVAPIPE, - HW_ACC_SIAMMDSP, - HW_ACC_SIAPIPE, - HW_ACC_SGA, - HW_ACC_B2R2, - HW_ACC_MCDE, - HW_ACC_ESRAM1, - HW_ACC_ESRAM2, - HW_ACC_ESRAM3, - HW_ACC_ESRAM4, - NUM_HW_ACC -}; - /** * enum prcmu_power_status - results from set_power_state * @PRCMU_SLEEP_OK: Sleep went ok @@ -552,8 +515,6 @@ bool prcmu_has_arm_maxopp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); -/* NOTE! Use regulator framework instead */ -int prcmu_set_hwacc(u16 hw_acc_dev, u8 state); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); bool prcmu_is_auto_pm_enabled(void); @@ -667,10 +628,6 @@ static inline int db8500_prcmu_get_ddr_opp(void) return DDR_100_OPP; } -static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state) -{ - return 0; -} static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle) { -- cgit v1.2.3-70-g09d2 From 5f96a1a6d5d82f79015e5e480e4ac8772607f69b Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Thu, 15 Mar 2012 19:50:40 +0100 Subject: mfd: Add 8520 PRCMU variant to db8500-prcmu Signed-off-by: Bengt Jonsson Reviewed-by: Mattias Nilssson Reviewed-by: Jonas Aberg Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 2 ++ include/linux/mfd/db8500-prcmu.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 09fd6a39d7f..06a3c32b2e6 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2634,6 +2634,8 @@ static char *fw_project_name(u8 project) return "U9500"; case PRCMU_FW_PROJECT_U9500_C2: return "U9500 C2"; + case PRCMU_FW_PROJECT_U8520: + return "U8520"; default: return "Unknown"; } diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index a220905337b..19ea0a6b542 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -497,6 +497,7 @@ struct prcmu_auto_pm_config { #define PRCMU_FW_PROJECT_U9500 4 #define PRCMU_FW_PROJECT_U8500_C2 7 #define PRCMU_FW_PROJECT_U9500_C2 11 +#define PRCMU_FW_PROJECT_U8520 13 struct prcmu_fw_version { u8 project; -- cgit v1.2.3-70-g09d2 From 1927ddf66805fca2af010c3e9d0b29216aed0fae Mon Sep 17 00:00:00 2001 From: Bengt Jonsson Date: Thu, 15 Mar 2012 19:50:51 +0100 Subject: mfd: Add 8420 variant to db8500-prcmu Signed-off-by: Bengt Jonsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 2 ++ include/linux/mfd/db8500-prcmu.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 06a3c32b2e6..ebc1e865822 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2636,6 +2636,8 @@ static char *fw_project_name(u8 project) return "U9500 C2"; case PRCMU_FW_PROJECT_U8520: return "U8520"; + case PRCMU_FW_PROJECT_U8420: + return "U8420"; default: return "Unknown"; } diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 19ea0a6b542..b3a43b1263f 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -498,6 +498,7 @@ struct prcmu_auto_pm_config { #define PRCMU_FW_PROJECT_U8500_C2 7 #define PRCMU_FW_PROJECT_U9500_C2 11 #define PRCMU_FW_PROJECT_U8520 13 +#define PRCMU_FW_PROJECT_U8420 14 struct prcmu_fw_version { u8 project; -- cgit v1.2.3-70-g09d2 From 095e7f780be59f3adb4d39ac3cb8d3665b3f2347 Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Fri, 16 Mar 2012 12:58:37 +0530 Subject: mfd: Fix compilation error in tps65910.h 'struct gpio_chip' is declared in include/asm-generic/gpio.h which is included by include/linux/gpio.h. However without including gpio.h, TPS65910.h declares a member of this type as part of 'struct tps65910' declaration. This causes compilation error, if gpio.h is not included before including tps65910.h, in source files. Signed-off-by: Venu Byravarasu Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps65910.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index b9aceb5c122..0148c8049ca 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -17,6 +17,8 @@ #ifndef __LINUX_MFD_TPS65910_H #define __LINUX_MFD_TPS65910_H +#include + /* TPS chip id list */ #define TPS65910 0 #define TPS65911 1 -- cgit v1.2.3-70-g09d2 From 75060a1d9dc016fb25524e65afba7ec86778084f Mon Sep 17 00:00:00 2001 From: "Ying-Chun Liu (PaulLiu)" Date: Fri, 16 Mar 2012 21:12:32 +0100 Subject: mfd: Add anatop mfd driver Signed-off-by: Ying-Chun Liu (PaulLiu) Acked-by: Shawn Guo Reviewed-by: Arnd Bergmann Reviewed-by: Mark Brown Cc: Venu Byravarasu Cc: Peter Korsgaard Cc: Rob Lee Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 8 +++ drivers/mfd/Makefile | 1 + drivers/mfd/anatop-mfd.c | 137 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/anatop.h | 40 +++++++++++++ 4 files changed, 186 insertions(+) create mode 100644 drivers/mfd/anatop-mfd.c create mode 100644 include/linux/mfd/anatop.h (limited to 'include/linux') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0f593966a31..a5f41766dc3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -860,6 +860,14 @@ config MFD_RC5T583 Additional drivers must be enabled in order to use the different functionality of the device. +config MFD_ANATOP + bool "Support for Freescale i.MX on-chip ANATOP controller" + depends on SOC_IMX6Q + help + Select this option to enable Freescale i.MX on-chip ANATOP + MFD controller. This controller embeds regulator and + thermal devices for Freescale i.MX platforms. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ea0bb809739..67f7b0e34d3 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -114,3 +114,4 @@ obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o +obj-$(CONFIG_MFD_ANATOP) += anatop-mfd.o diff --git a/drivers/mfd/anatop-mfd.c b/drivers/mfd/anatop-mfd.c new file mode 100644 index 00000000000..2af42480635 --- /dev/null +++ b/drivers/mfd/anatop-mfd.c @@ -0,0 +1,137 @@ +/* + * Anatop MFD driver + * + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) + * Copyright (C) 2012 Linaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +u32 anatop_get_bits(struct anatop *adata, u32 addr, int bit_shift, + int bit_width) +{ + u32 val, mask; + + if (bit_width == 32) + mask = ~0; + else + mask = (1 << bit_width) - 1; + + val = readl(adata->ioreg + addr); + val = (val >> bit_shift) & mask; + + return val; +} +EXPORT_SYMBOL_GPL(anatop_get_bits); + +void anatop_set_bits(struct anatop *adata, u32 addr, int bit_shift, + int bit_width, u32 data) +{ + u32 val, mask; + + if (bit_width == 32) + mask = ~0; + else + mask = (1 << bit_width) - 1; + + spin_lock(&adata->reglock); + val = readl(adata->ioreg + addr) & ~(mask << bit_shift); + writel((data << bit_shift) | val, adata->ioreg + addr); + spin_unlock(&adata->reglock); +} +EXPORT_SYMBOL_GPL(anatop_set_bits); + +static const struct of_device_id of_anatop_match[] = { + { .compatible = "fsl,imx6q-anatop", }, + { }, +}; + +static int __devinit of_anatop_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void *ioreg; + struct anatop *drvdata; + + ioreg = of_iomap(np, 0); + if (!ioreg) + return -EADDRNOTAVAIL; + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) + return -ENOMEM; + drvdata->ioreg = ioreg; + spin_lock_init(&drvdata->reglock); + platform_set_drvdata(pdev, drvdata); + of_platform_populate(np, of_anatop_match, NULL, dev); + + return 0; +} + +static int __devexit of_anatop_remove(struct platform_device *pdev) +{ + struct anatop *drvdata; + drvdata = platform_get_drvdata(pdev); + iounmap(drvdata->ioreg); + + return 0; +} + +static struct platform_driver anatop_of_driver = { + .driver = { + .name = "anatop-mfd", + .owner = THIS_MODULE, + .of_match_table = of_anatop_match, + }, + .probe = of_anatop_probe, + .remove = of_anatop_remove, +}; + +static int __init anatop_init(void) +{ + return platform_driver_register(&anatop_of_driver); +} +postcore_initcall(anatop_init); + +static void __exit anatop_exit(void) +{ + platform_driver_unregister(&anatop_of_driver); +} +module_exit(anatop_exit); + +MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) "); +MODULE_DESCRIPTION("ANATOP MFD driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h new file mode 100644 index 00000000000..22c1007d3ec --- /dev/null +++ b/include/linux/mfd/anatop.h @@ -0,0 +1,40 @@ +/* + * anatop.h - Anatop MFD driver + * + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) + * Copyright (C) 2012 Linaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_MFD_ANATOP_H +#define __LINUX_MFD_ANATOP_H + +#include + +/** + * anatop - MFD data + * @ioreg: ioremap register + * @reglock: spinlock for register read/write + */ +struct anatop { + void *ioreg; + spinlock_t reglock; +}; + +extern u32 anatop_get_bits(struct anatop *, u32, int, int); +extern void anatop_set_bits(struct anatop *, u32, int, int, u32); + +#endif /* __LINUX_MFD_ANATOP_H */ -- cgit v1.2.3-70-g09d2 From b2476490ef11134b65544d8f062cff96c53e941b Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Thu, 15 Mar 2012 23:11:19 -0700 Subject: clk: introduce the common clock framework The common clock framework defines a common struct clk useful across most platforms as well as an implementation of the clk api that drivers can use safely for managing clocks. The net result is consolidation of many different struct clk definitions and platform-specific clock framework implementations. This patch introduces the common struct clk, struct clk_ops and an implementation of the well-known clock api in include/clk/clk.h. Platforms may define their own hardware-specific clock structure and their own clock operation callbacks, so long as it wraps an instance of struct clk_hw. See Documentation/clk.txt for more details. This patch is based on the work of Jeremy Kerr, which in turn was based on the work of Ben Herrenschmidt. Signed-off-by: Mike Turquette Signed-off-by: Mike Turquette Reviewed-by: Thomas Gleixner Tested-by: Andrew Lunn Reviewed-by: Rob Herring calxeda.com> Cc: Russell King Cc: Jeremy Kerr Cc: Arnd Bergman Cc: Paul Walmsley Cc: Shawn Guo Cc: Sascha Hauer Cc: Richard Zhao Cc: Saravana Kannan Cc: Magnus Damm Cc: Mark Brown Cc: Linus Walleij Cc: Stephen Boyd Cc: Amit Kucheria Cc: Deepak Saxena Cc: Grant Likely Signed-off-by: Arnd Bergmann --- drivers/clk/Kconfig | 40 ++ drivers/clk/Makefile | 1 + drivers/clk/clk.c | 1461 ++++++++++++++++++++++++++++++++++++++++++ include/linux/clk-private.h | 72 +++ include/linux/clk-provider.h | 173 +++++ include/linux/clk.h | 68 +- 6 files changed, 1810 insertions(+), 5 deletions(-) create mode 100644 drivers/clk/clk.c create mode 100644 include/linux/clk-private.h create mode 100644 include/linux/clk-provider.h (limited to 'include/linux') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 9b3cd08cd0e..2eaf17ed279 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -8,3 +8,43 @@ config HAVE_CLK_PREPARE config HAVE_MACH_CLKDEV bool + +menuconfig COMMON_CLK + bool "Common Clock Framework" + select HAVE_CLK_PREPARE + ---help--- + The common clock framework is a single definition of struct + clk, useful across many platforms, as well as an + implementation of the clock API in include/linux/clk.h. + Architectures utilizing the common struct clk should select + this automatically, but it may be necessary to manually select + this option for loadable modules requiring the common clock + framework. + + If in doubt, say "N". + +if COMMON_CLK + +config COMMON_CLK_DISABLE_UNUSED + bool "Disabled unused clocks at boot" + depends on COMMON_CLK + ---help--- + Traverses the entire clock tree and disables any clocks that are + enabled in hardware but have not been enabled by any device drivers. + This saves power and keeps the software model of the clock in line + with reality. + + If in doubt, say "N". + +config COMMON_CLK_DEBUG + bool "DebugFS representation of clock tree" + depends on COMMON_CLK + select DEBUG_FS + ---help--- + Creates a directory hierchy in debugfs for visualizing the clk + tree structure. Each directory contains read-only members + that export information specific to that clk node: clk_rate, + clk_flags, clk_prepare_count, clk_enable_count & + clk_notifier_count. + +endif diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 07613fa172c..ff362c4fb4c 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o +obj-$(CONFIG_COMMON_CLK) += clk.o diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c new file mode 100644 index 00000000000..9cf6f59e3e1 --- /dev/null +++ b/drivers/clk/clk.c @@ -0,0 +1,1461 @@ +/* + * Copyright (C) 2010-2011 Canonical Ltd + * Copyright (C) 2011-2012 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Standard functionality for the common clock API. See Documentation/clk.txt + */ + +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(enable_lock); +static DEFINE_MUTEX(prepare_lock); + +static HLIST_HEAD(clk_root_list); +static HLIST_HEAD(clk_orphan_list); +static LIST_HEAD(clk_notifier_list); + +/*** debugfs support ***/ + +#ifdef CONFIG_COMMON_CLK_DEBUG +#include + +static struct dentry *rootdir; +static struct dentry *orphandir; +static int inited = 0; + +/* caller must hold prepare_lock */ +static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry) +{ + struct dentry *d; + int ret = -ENOMEM; + + if (!clk || !pdentry) { + ret = -EINVAL; + goto out; + } + + d = debugfs_create_dir(clk->name, pdentry); + if (!d) + goto out; + + clk->dentry = d; + + d = debugfs_create_u32("clk_rate", S_IRUGO, clk->dentry, + (u32 *)&clk->rate); + if (!d) + goto err_out; + + d = debugfs_create_x32("clk_flags", S_IRUGO, clk->dentry, + (u32 *)&clk->flags); + if (!d) + goto err_out; + + d = debugfs_create_u32("clk_prepare_count", S_IRUGO, clk->dentry, + (u32 *)&clk->prepare_count); + if (!d) + goto err_out; + + d = debugfs_create_u32("clk_enable_count", S_IRUGO, clk->dentry, + (u32 *)&clk->enable_count); + if (!d) + goto err_out; + + d = debugfs_create_u32("clk_notifier_count", S_IRUGO, clk->dentry, + (u32 *)&clk->notifier_count); + if (!d) + goto err_out; + + ret = 0; + goto out; + +err_out: + debugfs_remove(clk->dentry); +out: + return ret; +} + +/* caller must hold prepare_lock */ +static int clk_debug_create_subtree(struct clk *clk, struct dentry *pdentry) +{ + struct clk *child; + struct hlist_node *tmp; + int ret = -EINVAL;; + + if (!clk || !pdentry) + goto out; + + ret = clk_debug_create_one(clk, pdentry); + + if (ret) + goto out; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + clk_debug_create_subtree(child, clk->dentry); + + ret = 0; +out: + return ret; +} + +/** + * clk_debug_register - add a clk node to the debugfs clk tree + * @clk: the clk being added to the debugfs clk tree + * + * Dynamically adds a clk to the debugfs clk tree if debugfs has been + * initialized. Otherwise it bails out early since the debugfs clk tree + * will be created lazily by clk_debug_init as part of a late_initcall. + * + * Caller must hold prepare_lock. Only clk_init calls this function (so + * far) so this is taken care. + */ +static int clk_debug_register(struct clk *clk) +{ + struct clk *parent; + struct dentry *pdentry; + int ret = 0; + + if (!inited) + goto out; + + parent = clk->parent; + + /* + * Check to see if a clk is a root clk. Also check that it is + * safe to add this clk to debugfs + */ + if (!parent) + if (clk->flags & CLK_IS_ROOT) + pdentry = rootdir; + else + pdentry = orphandir; + else + if (parent->dentry) + pdentry = parent->dentry; + else + goto out; + + ret = clk_debug_create_subtree(clk, pdentry); + +out: + return ret; +} + +/** + * clk_debug_init - lazily create the debugfs clk tree visualization + * + * clks are often initialized very early during boot before memory can + * be dynamically allocated and well before debugfs is setup. + * clk_debug_init walks the clk tree hierarchy while holding + * prepare_lock and creates the topology as part of a late_initcall, + * thus insuring that clks initialized very early will still be + * represented in the debugfs clk tree. This function should only be + * called once at boot-time, and all other clks added dynamically will + * be done so with clk_debug_register. + */ +static int __init clk_debug_init(void) +{ + struct clk *clk; + struct hlist_node *tmp; + + rootdir = debugfs_create_dir("clk", NULL); + + if (!rootdir) + return -ENOMEM; + + orphandir = debugfs_create_dir("orphans", rootdir); + + if (!orphandir) + return -ENOMEM; + + mutex_lock(&prepare_lock); + + hlist_for_each_entry(clk, tmp, &clk_root_list, child_node) + clk_debug_create_subtree(clk, rootdir); + + hlist_for_each_entry(clk, tmp, &clk_orphan_list, child_node) + clk_debug_create_subtree(clk, orphandir); + + inited = 1; + + mutex_unlock(&prepare_lock); + + return 0; +} +late_initcall(clk_debug_init); +#else +static inline int clk_debug_register(struct clk *clk) { return 0; } +#endif /* CONFIG_COMMON_CLK_DEBUG */ + +#ifdef CONFIG_COMMON_CLK_DISABLE_UNUSED +/* caller must hold prepare_lock */ +static void clk_disable_unused_subtree(struct clk *clk) +{ + struct clk *child; + struct hlist_node *tmp; + unsigned long flags; + + if (!clk) + goto out; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + clk_disable_unused_subtree(child); + + spin_lock_irqsave(&enable_lock, flags); + + if (clk->enable_count) + goto unlock_out; + + if (clk->flags & CLK_IGNORE_UNUSED) + goto unlock_out; + + if (__clk_is_enabled(clk) && clk->ops->disable) + clk->ops->disable(clk->hw); + +unlock_out: + spin_unlock_irqrestore(&enable_lock, flags); + +out: + return; +} + +static int clk_disable_unused(void) +{ + struct clk *clk; + struct hlist_node *tmp; + + mutex_lock(&prepare_lock); + + hlist_for_each_entry(clk, tmp, &clk_root_list, child_node) + clk_disable_unused_subtree(clk); + + hlist_for_each_entry(clk, tmp, &clk_orphan_list, child_node) + clk_disable_unused_subtree(clk); + + mutex_unlock(&prepare_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#else +static inline int clk_disable_unused(struct clk *clk) { return 0; } +#endif /* CONFIG_COMMON_CLK_DISABLE_UNUSED */ + +/*** helper functions ***/ + +inline const char *__clk_get_name(struct clk *clk) +{ + return !clk ? NULL : clk->name; +} + +inline struct clk_hw *__clk_get_hw(struct clk *clk) +{ + return !clk ? NULL : clk->hw; +} + +inline u8 __clk_get_num_parents(struct clk *clk) +{ + return !clk ? -EINVAL : clk->num_parents; +} + +inline struct clk *__clk_get_parent(struct clk *clk) +{ + return !clk ? NULL : clk->parent; +} + +inline int __clk_get_enable_count(struct clk *clk) +{ + return !clk ? -EINVAL : clk->enable_count; +} + +inline int __clk_get_prepare_count(struct clk *clk) +{ + return !clk ? -EINVAL : clk->prepare_count; +} + +unsigned long __clk_get_rate(struct clk *clk) +{ + unsigned long ret; + + if (!clk) { + ret = -EINVAL; + goto out; + } + + ret = clk->rate; + + if (clk->flags & CLK_IS_ROOT) + goto out; + + if (!clk->parent) + ret = -ENODEV; + +out: + return ret; +} + +inline unsigned long __clk_get_flags(struct clk *clk) +{ + return !clk ? -EINVAL : clk->flags; +} + +int __clk_is_enabled(struct clk *clk) +{ + int ret; + + if (!clk) + return -EINVAL; + + /* + * .is_enabled is only mandatory for clocks that gate + * fall back to software usage counter if .is_enabled is missing + */ + if (!clk->ops->is_enabled) { + ret = clk->enable_count ? 1 : 0; + goto out; + } + + ret = clk->ops->is_enabled(clk->hw); +out: + return ret; +} + +static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk) +{ + struct clk *child; + struct clk *ret; + struct hlist_node *tmp; + + if (!strcmp(clk->name, name)) + return clk; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + ret = __clk_lookup_subtree(name, child); + if (ret) + return ret; + } + + return NULL; +} + +struct clk *__clk_lookup(const char *name) +{ + struct clk *root_clk; + struct clk *ret; + struct hlist_node *tmp; + + if (!name) + return NULL; + + /* search the 'proper' clk tree first */ + hlist_for_each_entry(root_clk, tmp, &clk_root_list, child_node) { + ret = __clk_lookup_subtree(name, root_clk); + if (ret) + return ret; + } + + /* if not found, then search the orphan tree */ + hlist_for_each_entry(root_clk, tmp, &clk_orphan_list, child_node) { + ret = __clk_lookup_subtree(name, root_clk); + if (ret) + return ret; + } + + return NULL; +} + +/*** clk api ***/ + +void __clk_unprepare(struct clk *clk) +{ + if (!clk) + return; + + if (WARN_ON(clk->prepare_count == 0)) + return; + + if (--clk->prepare_count > 0) + return; + + WARN_ON(clk->enable_count > 0); + + if (clk->ops->unprepare) + clk->ops->unprepare(clk->hw); + + __clk_unprepare(clk->parent); +} + +/** + * clk_unprepare - undo preparation of a clock source + * @clk: the clk being unprepare + * + * clk_unprepare may sleep, which differentiates it from clk_disable. In a + * simple case, clk_unprepare can be used instead of clk_disable to gate a clk + * if the operation may sleep. One example is a clk which is accessed over + * I2c. In the complex case a clk gate operation may require a fast and a slow + * part. It is this reason that clk_unprepare and clk_disable are not mutually + * exclusive. In fact clk_disable must be called before clk_unprepare. + */ +void clk_unprepare(struct clk *clk) +{ + mutex_lock(&prepare_lock); + __clk_unprepare(clk); + mutex_unlock(&prepare_lock); +} +EXPORT_SYMBOL_GPL(clk_unprepare); + +int __clk_prepare(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return 0; + + if (clk->prepare_count == 0) { + ret = __clk_prepare(clk->parent); + if (ret) + return ret; + + if (clk->ops->prepare) { + ret = clk->ops->prepare(clk->hw); + if (ret) { + __clk_unprepare(clk->parent); + return ret; + } + } + } + + clk->prepare_count++; + + return 0; +} + +/** + * clk_prepare - prepare a clock source + * @clk: the clk being prepared + * + * clk_prepare may sleep, which differentiates it from clk_enable. In a simple + * case, clk_prepare can be used instead of clk_enable to ungate a clk if the + * operation may sleep. One example is a clk which is accessed over I2c. In + * the complex case a clk ungate operation may require a fast and a slow part. + * It is this reason that clk_prepare and clk_enable are not mutually + * exclusive. In fact clk_prepare must be called before clk_enable. + * Returns 0 on success, -EERROR otherwise. + */ +int clk_prepare(struct clk *clk) +{ + int ret; + + mutex_lock(&prepare_lock); + ret = __clk_prepare(clk); + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_prepare); + +static void __clk_disable(struct clk *clk) +{ + if (!clk) + return; + + if (WARN_ON(clk->enable_count == 0)) + return; + + if (--clk->enable_count > 0) + return; + + if (clk->ops->disable) + clk->ops->disable(clk->hw); + + __clk_disable(clk->parent); +} + +/** + * clk_disable - gate a clock + * @clk: the clk being gated + * + * clk_disable must not sleep, which differentiates it from clk_unprepare. In + * a simple case, clk_disable can be used instead of clk_unprepare to gate a + * clk if the operation is fast and will never sleep. One example is a + * SoC-internal clk which is controlled via simple register writes. In the + * complex case a clk gate operation may require a fast and a slow part. It is + * this reason that clk_unprepare and clk_disable are not mutually exclusive. + * In fact clk_disable must be called before clk_unprepare. + */ +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&enable_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&enable_lock, flags); +} +EXPORT_SYMBOL_GPL(clk_disable); + +static int __clk_enable(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return 0; + + if (WARN_ON(clk->prepare_count == 0)) + return -ESHUTDOWN; + + if (clk->enable_count == 0) { + ret = __clk_enable(clk->parent); + + if (ret) + return ret; + + if (clk->ops->enable) { + ret = clk->ops->enable(clk->hw); + if (ret) { + __clk_disable(clk->parent); + return ret; + } + } + } + + clk->enable_count++; + return 0; +} + +/** + * clk_enable - ungate a clock + * @clk: the clk being ungated + * + * clk_enable must not sleep, which differentiates it from clk_prepare. In a + * simple case, clk_enable can be used instead of clk_prepare to ungate a clk + * if the operation will never sleep. One example is a SoC-internal clk which + * is controlled via simple register writes. In the complex case a clk ungate + * operation may require a fast and a slow part. It is this reason that + * clk_enable and clk_prepare are not mutually exclusive. In fact clk_prepare + * must be called before clk_enable. Returns 0 on success, -EERROR + * otherwise. + */ +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&enable_lock, flags); + ret = __clk_enable(clk); + spin_unlock_irqrestore(&enable_lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_enable); + +/** + * clk_get_rate - return the rate of clk + * @clk: the clk whose rate is being returned + * + * Simply returns the cached rate of the clk. Does not query the hardware. If + * clk is NULL then returns -EINVAL. + */ +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long rate; + + mutex_lock(&prepare_lock); + rate = __clk_get_rate(clk); + mutex_unlock(&prepare_lock); + + return rate; +} +EXPORT_SYMBOL_GPL(clk_get_rate); + +/** + * __clk_round_rate - round the given rate for a clk + * @clk: round the rate of this clock + * + * Caller must hold prepare_lock. Useful for clk_ops such as .set_rate + */ +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long unused; + + if (!clk) + return -EINVAL; + + if (!clk->ops->round_rate) + return clk->rate; + + if (clk->flags & CLK_SET_RATE_PARENT) + return clk->ops->round_rate(clk->hw, rate, &unused); + else + return clk->ops->round_rate(clk->hw, rate, NULL); +} + +/** + * clk_round_rate - round the given rate for a clk + * @clk: the clk for which we are rounding a rate + * @rate: the rate which is to be rounded + * + * Takes in a rate as input and rounds it to a rate that the clk can actually + * use which is then returned. If clk doesn't support round_rate operation + * then the parent rate is returned. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long ret; + + mutex_lock(&prepare_lock); + ret = __clk_round_rate(clk, rate); + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_round_rate); + +/** + * __clk_notify - call clk notifier chain + * @clk: struct clk * that is changing rate + * @msg: clk notifier type (see include/linux/clk.h) + * @old_rate: old clk rate + * @new_rate: new clk rate + * + * Triggers a notifier call chain on the clk rate-change notification + * for 'clk'. Passes a pointer to the struct clk and the previous + * and current rates to the notifier callback. Intended to be called by + * internal clock code only. Returns NOTIFY_DONE from the last driver + * called if all went well, or NOTIFY_STOP or NOTIFY_BAD immediately if + * a driver returns that. + */ +static int __clk_notify(struct clk *clk, unsigned long msg, + unsigned long old_rate, unsigned long new_rate) +{ + struct clk_notifier *cn; + struct clk_notifier_data cnd; + int ret = NOTIFY_DONE; + + cnd.clk = clk; + cnd.old_rate = old_rate; + cnd.new_rate = new_rate; + + list_for_each_entry(cn, &clk_notifier_list, node) { + if (cn->clk == clk) { + ret = srcu_notifier_call_chain(&cn->notifier_head, msg, + &cnd); + break; + } + } + + return ret; +} + +/** + * __clk_recalc_rates + * @clk: first clk in the subtree + * @msg: notification type (see include/linux/clk.h) + * + * Walks the subtree of clks starting with clk and recalculates rates as it + * goes. Note that if a clk does not implement the .recalc_rate callback then + * it is assumed that the clock will take on the rate of it's parent. + * + * clk_recalc_rates also propagates the POST_RATE_CHANGE notification, + * if necessary. + * + * Caller must hold prepare_lock. + */ +static void __clk_recalc_rates(struct clk *clk, unsigned long msg) +{ + unsigned long old_rate; + unsigned long parent_rate = 0; + struct hlist_node *tmp; + struct clk *child; + + old_rate = clk->rate; + + if (clk->parent) + parent_rate = clk->parent->rate; + + if (clk->ops->recalc_rate) + clk->rate = clk->ops->recalc_rate(clk->hw, parent_rate); + else + clk->rate = parent_rate; + + /* + * ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE + * & ABORT_RATE_CHANGE notifiers + */ + if (clk->notifier_count && msg) + __clk_notify(clk, msg, old_rate, clk->rate); + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + __clk_recalc_rates(child, msg); +} + +/** + * __clk_speculate_rates + * @clk: first clk in the subtree + * @parent_rate: the "future" rate of clk's parent + * + * Walks the subtree of clks starting with clk, speculating rates as it + * goes and firing off PRE_RATE_CHANGE notifications as necessary. + * + * Unlike clk_recalc_rates, clk_speculate_rates exists only for sending + * pre-rate change notifications and returns early if no clks in the + * subtree have subscribed to the notifications. Note that if a clk does not + * implement the .recalc_rate callback then it is assumed that the clock will + * take on the rate of it's parent. + * + * Caller must hold prepare_lock. + */ +static int __clk_speculate_rates(struct clk *clk, unsigned long parent_rate) +{ + struct hlist_node *tmp; + struct clk *child; + unsigned long new_rate; + int ret = NOTIFY_DONE; + + if (clk->ops->recalc_rate) + new_rate = clk->ops->recalc_rate(clk->hw, parent_rate); + else + new_rate = parent_rate; + + /* abort the rate change if a driver returns NOTIFY_BAD */ + if (clk->notifier_count) + ret = __clk_notify(clk, PRE_RATE_CHANGE, clk->rate, new_rate); + + if (ret == NOTIFY_BAD) + goto out; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + ret = __clk_speculate_rates(child, new_rate); + if (ret == NOTIFY_BAD) + break; + } + +out: + return ret; +} + +static void clk_calc_subtree(struct clk *clk, unsigned long new_rate) +{ + struct clk *child; + struct hlist_node *tmp; + + clk->new_rate = new_rate; + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + if (child->ops->recalc_rate) + child->new_rate = child->ops->recalc_rate(child->hw, new_rate); + else + child->new_rate = new_rate; + clk_calc_subtree(child, child->new_rate); + } +} + +/* + * calculate the new rates returning the topmost clock that has to be + * changed. + */ +static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) +{ + struct clk *top = clk; + unsigned long best_parent_rate = clk->parent->rate; + unsigned long new_rate; + + if (!clk->ops->round_rate && !(clk->flags & CLK_SET_RATE_PARENT)) { + clk->new_rate = clk->rate; + return NULL; + } + + if (!clk->ops->round_rate && (clk->flags & CLK_SET_RATE_PARENT)) { + top = clk_calc_new_rates(clk->parent, rate); + new_rate = clk->new_rate = clk->parent->new_rate; + + goto out; + } + + if (clk->flags & CLK_SET_RATE_PARENT) + new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); + else + new_rate = clk->ops->round_rate(clk->hw, rate, NULL); + + if (best_parent_rate != clk->parent->rate) { + top = clk_calc_new_rates(clk->parent, best_parent_rate); + + goto out; + } + +out: + clk_calc_subtree(clk, new_rate); + + return top; +} + +/* + * Notify about rate changes in a subtree. Always walk down the whole tree + * so that in case of an error we can walk down the whole tree again and + * abort the change. + */ +static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event) +{ + struct hlist_node *tmp; + struct clk *child, *fail_clk = NULL; + int ret = NOTIFY_DONE; + + if (clk->rate == clk->new_rate) + return 0; + + if (clk->notifier_count) { + ret = __clk_notify(clk, event, clk->rate, clk->new_rate); + if (ret == NOTIFY_BAD) + fail_clk = clk; + } + + hlist_for_each_entry(child, tmp, &clk->children, child_node) { + clk = clk_propagate_rate_change(child, event); + if (clk) + fail_clk = clk; + } + + return fail_clk; +} + +/* + * walk down a subtree and set the new rates notifying the rate + * change on the way + */ +static void clk_change_rate(struct clk *clk) +{ + struct clk *child; + unsigned long old_rate; + struct hlist_node *tmp; + + old_rate = clk->rate; + + if (clk->ops->set_rate) + clk->ops->set_rate(clk->hw, clk->new_rate); + + if (clk->ops->recalc_rate) + clk->rate = clk->ops->recalc_rate(clk->hw, + clk->parent->rate); + else + clk->rate = clk->parent->rate; + + if (clk->notifier_count && old_rate != clk->rate) + __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); + + hlist_for_each_entry(child, tmp, &clk->children, child_node) + clk_change_rate(child); +} + +/** + * clk_set_rate - specify a new rate for clk + * @clk: the clk whose rate is being changed + * @rate: the new rate for clk + * + * In the simplest case clk_set_rate will only change the rate of clk. + * + * If clk has the CLK_SET_RATE_GATE flag set and it is enabled this call + * will fail; only when the clk is disabled will it be able to change + * its rate. + * + * Setting the CLK_SET_RATE_PARENT flag allows clk_set_rate to + * recursively propagate up to clk's parent; whether or not this happens + * depends on the outcome of clk's .round_rate implementation. If + * *parent_rate is 0 after calling .round_rate then upstream parent + * propagation is ignored. If *parent_rate comes back with a new rate + * for clk's parent then we propagate up to clk's parent and set it's + * rate. Upward propagation will continue until either a clk does not + * support the CLK_SET_RATE_PARENT flag or .round_rate stops requesting + * changes to clk's parent_rate. If there is a failure during upstream + * propagation then clk_set_rate will unwind and restore each clk's rate + * that had been successfully changed. Afterwards a rate change abort + * notification will be propagated downstream, starting from the clk + * that failed. + * + * At the end of all of the rate setting, clk_set_rate internally calls + * __clk_recalc_rates and propagates the rate changes downstream, + * starting from the highest clk whose rate was changed. This has the + * added benefit of propagating post-rate change notifiers. + * + * Note that while post-rate change and rate change abort notifications + * are guaranteed to be sent to a clk only once per call to + * clk_set_rate, pre-change notifications will be sent for every clk + * whose rate is changed. Stacking pre-change notifications is noisy + * for the drivers subscribed to them, but this allows drivers to react + * to intermediate clk rate changes up until the point where the final + * rate is achieved at the end of upstream propagation. + * + * Returns 0 on success, -EERROR otherwise. + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *top, *fail_clk; + int ret = 0; + + /* prevent racing with updates to the clock topology */ + mutex_lock(&prepare_lock); + + /* bail early if nothing to do */ + if (rate == clk->rate) + goto out; + + /* calculate new rates and get the topmost changed clock */ + top = clk_calc_new_rates(clk, rate); + if (!top) { + ret = -EINVAL; + goto out; + } + + /* notify that we are about to change rates */ + fail_clk = clk_propagate_rate_change(top, PRE_RATE_CHANGE); + if (fail_clk) { + pr_warn("%s: failed to set %s rate\n", __func__, + fail_clk->name); + clk_propagate_rate_change(top, ABORT_RATE_CHANGE); + ret = -EBUSY; + goto out; + } + + /* change the rates */ + clk_change_rate(top); + + mutex_unlock(&prepare_lock); + + return 0; +out: + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +/** + * clk_get_parent - return the parent of a clk + * @clk: the clk whose parent gets returned + * + * Simply returns clk->parent. Returns NULL if clk is NULL. + */ +struct clk *clk_get_parent(struct clk *clk) +{ + struct clk *parent; + + mutex_lock(&prepare_lock); + parent = __clk_get_parent(clk); + mutex_unlock(&prepare_lock); + + return parent; +} +EXPORT_SYMBOL_GPL(clk_get_parent); + +/* + * .get_parent is mandatory for clocks with multiple possible parents. It is + * optional for single-parent clocks. Always call .get_parent if it is + * available and WARN if it is missing for multi-parent clocks. + * + * For single-parent clocks without .get_parent, first check to see if the + * .parents array exists, and if so use it to avoid an expensive tree + * traversal. If .parents does not exist then walk the tree with __clk_lookup. + */ +static struct clk *__clk_init_parent(struct clk *clk) +{ + struct clk *ret = NULL; + u8 index; + + /* handle the trivial cases */ + + if (!clk->num_parents) + goto out; + + if (clk->num_parents == 1) { + if (IS_ERR_OR_NULL(clk->parent)) + ret = clk->parent = __clk_lookup(clk->parent_names[0]); + ret = clk->parent; + goto out; + } + + if (!clk->ops->get_parent) { + WARN(!clk->ops->get_parent, + "%s: multi-parent clocks must implement .get_parent\n", + __func__); + goto out; + }; + + /* + * Do our best to cache parent clocks in clk->parents. This prevents + * unnecessary and expensive calls to __clk_lookup. We don't set + * clk->parent here; that is done by the calling function + */ + + index = clk->ops->get_parent(clk->hw); + + if (!clk->parents) + clk->parents = + kmalloc((sizeof(struct clk*) * clk->num_parents), + GFP_KERNEL); + + if (!clk->parents) + ret = __clk_lookup(clk->parent_names[index]); + else if (!clk->parents[index]) + ret = clk->parents[index] = + __clk_lookup(clk->parent_names[index]); + else + ret = clk->parents[index]; + +out: + return ret; +} + +void __clk_reparent(struct clk *clk, struct clk *new_parent) +{ +#ifdef CONFIG_COMMON_CLK_DEBUG + struct dentry *d; + struct dentry *new_parent_d; +#endif + + if (!clk || !new_parent) + return; + + hlist_del(&clk->child_node); + + if (new_parent) + hlist_add_head(&clk->child_node, &new_parent->children); + else + hlist_add_head(&clk->child_node, &clk_orphan_list); + +#ifdef CONFIG_COMMON_CLK_DEBUG + if (!inited) + goto out; + + if (new_parent) + new_parent_d = new_parent->dentry; + else + new_parent_d = orphandir; + + d = debugfs_rename(clk->dentry->d_parent, clk->dentry, + new_parent_d, clk->name); + if (d) + clk->dentry = d; + else + pr_debug("%s: failed to rename debugfs entry for %s\n", + __func__, clk->name); +out: +#endif + + clk->parent = new_parent; + + __clk_recalc_rates(clk, POST_RATE_CHANGE); +} + +static int __clk_set_parent(struct clk *clk, struct clk *parent) +{ + struct clk *old_parent; + unsigned long flags; + int ret = -EINVAL; + u8 i; + + old_parent = clk->parent; + + /* find index of new parent clock using cached parent ptrs */ + for (i = 0; i < clk->num_parents; i++) + if (clk->parents[i] == parent) + break; + + /* + * find index of new parent clock using string name comparison + * also try to cache the parent to avoid future calls to __clk_lookup + */ + if (i == clk->num_parents) + for (i = 0; i < clk->num_parents; i++) + if (!strcmp(clk->parent_names[i], parent->name)) { + clk->parents[i] = __clk_lookup(parent->name); + break; + } + + if (i == clk->num_parents) { + pr_debug("%s: clock %s is not a possible parent of clock %s\n", + __func__, parent->name, clk->name); + goto out; + } + + /* migrate prepare and enable */ + if (clk->prepare_count) + __clk_prepare(parent); + + /* FIXME replace with clk_is_enabled(clk) someday */ + spin_lock_irqsave(&enable_lock, flags); + if (clk->enable_count) + __clk_enable(parent); + spin_unlock_irqrestore(&enable_lock, flags); + + /* change clock input source */ + ret = clk->ops->set_parent(clk->hw, i); + + /* clean up old prepare and enable */ + spin_lock_irqsave(&enable_lock, flags); + if (clk->enable_count) + __clk_disable(old_parent); + spin_unlock_irqrestore(&enable_lock, flags); + + if (clk->prepare_count) + __clk_unprepare(old_parent); + +out: + return ret; +} + +/** + * clk_set_parent - switch the parent of a mux clk + * @clk: the mux clk whose input we are switching + * @parent: the new input to clk + * + * Re-parent clk to use parent as it's new input source. If clk has the + * CLK_SET_PARENT_GATE flag set then clk must be gated for this + * operation to succeed. After successfully changing clk's parent + * clk_set_parent will update the clk topology, sysfs topology and + * propagate rate recalculation via __clk_recalc_rates. Returns 0 on + * success, -EERROR otherwise. + */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (!clk || !clk->ops) + return -EINVAL; + + if (!clk->ops->set_parent) + return -ENOSYS; + + /* prevent racing with updates to the clock topology */ + mutex_lock(&prepare_lock); + + if (clk->parent == parent) + goto out; + + /* propagate PRE_RATE_CHANGE notifications */ + if (clk->notifier_count) + ret = __clk_speculate_rates(clk, parent->rate); + + /* abort if a driver objects */ + if (ret == NOTIFY_STOP) + goto out; + + /* only re-parent if the clock is not in use */ + if ((clk->flags & CLK_SET_PARENT_GATE) && clk->prepare_count) + ret = -EBUSY; + else + ret = __clk_set_parent(clk, parent); + + /* propagate ABORT_RATE_CHANGE if .set_parent failed */ + if (ret) { + __clk_recalc_rates(clk, ABORT_RATE_CHANGE); + goto out; + } + + /* propagate rate recalculation downstream */ + __clk_reparent(clk, parent); + +out: + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_parent); + +/** + * __clk_init - initialize the data structures in a struct clk + * @dev: device initializing this clk, placeholder for now + * @clk: clk being initialized + * + * Initializes the lists in struct clk, queries the hardware for the + * parent and rate and sets them both. + * + * Any struct clk passed into __clk_init must have the following members + * populated: + * .name + * .ops + * .hw + * .parent_names + * .num_parents + * .flags + * + * Essentially, everything that would normally be passed into clk_register is + * assumed to be initialized already in __clk_init. The other members may be + * populated, but are optional. + * + * __clk_init is only exposed via clk-private.h and is intended for use with + * very large numbers of clocks that need to be statically initialized. It is + * a layering violation to include clk-private.h from any code which implements + * a clock's .ops; as such any statically initialized clock data MUST be in a + * separate C file from the logic that implements it's operations. + */ +void __clk_init(struct device *dev, struct clk *clk) +{ + int i; + struct clk *orphan; + struct hlist_node *tmp, *tmp2; + + if (!clk) + return; + + mutex_lock(&prepare_lock); + + /* check to see if a clock with this name is already registered */ + if (__clk_lookup(clk->name)) + goto out; + + /* throw a WARN if any entries in parent_names are NULL */ + for (i = 0; i < clk->num_parents; i++) + WARN(!clk->parent_names[i], + "%s: invalid NULL in %s's .parent_names\n", + __func__, clk->name); + + /* + * Allocate an array of struct clk *'s to avoid unnecessary string + * look-ups of clk's possible parents. This can fail for clocks passed + * in to clk_init during early boot; thus any access to clk->parents[] + * must always check for a NULL pointer and try to populate it if + * necessary. + * + * If clk->parents is not NULL we skip this entire block. This allows + * for clock drivers to statically initialize clk->parents. + */ + if (clk->num_parents && !clk->parents) { + clk->parents = kmalloc((sizeof(struct clk*) * clk->num_parents), + GFP_KERNEL); + /* + * __clk_lookup returns NULL for parents that have not been + * clk_init'd; thus any access to clk->parents[] must check + * for a NULL pointer. We can always perform lazy lookups for + * missing parents later on. + */ + if (clk->parents) + for (i = 0; i < clk->num_parents; i++) + clk->parents[i] = + __clk_lookup(clk->parent_names[i]); + } + + clk->parent = __clk_init_parent(clk); + + /* + * Populate clk->parent if parent has already been __clk_init'd. If + * parent has not yet been __clk_init'd then place clk in the orphan + * list. If clk has set the CLK_IS_ROOT flag then place it in the root + * clk list. + * + * Every time a new clk is clk_init'd then we walk the list of orphan + * clocks and re-parent any that are children of the clock currently + * being clk_init'd. + */ + if (clk->parent) + hlist_add_head(&clk->child_node, + &clk->parent->children); + else if (clk->flags & CLK_IS_ROOT) + hlist_add_head(&clk->child_node, &clk_root_list); + else + hlist_add_head(&clk->child_node, &clk_orphan_list); + + /* + * Set clk's rate. The preferred method is to use .recalc_rate. For + * simple clocks and lazy developers the default fallback is to use the + * parent's rate. If a clock doesn't have a parent (or is orphaned) + * then rate is set to zero. + */ + if (clk->ops->recalc_rate) + clk->rate = clk->ops->recalc_rate(clk->hw, + __clk_get_rate(clk->parent)); + else if (clk->parent) + clk->rate = clk->parent->rate; + else + clk->rate = 0; + + /* + * walk the list of orphan clocks and reparent any that are children of + * this clock + */ + hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) + for (i = 0; i < orphan->num_parents; i++) + if (!strcmp(clk->name, orphan->parent_names[i])) { + __clk_reparent(orphan, clk); + break; + } + + /* + * optional platform-specific magic + * + * The .init callback is not used by any of the basic clock types, but + * exists for weird hardware that must perform initialization magic. + * Please consider other ways of solving initialization problems before + * using this callback, as it's use is discouraged. + */ + if (clk->ops->init) + clk->ops->init(clk->hw); + + clk_debug_register(clk); + +out: + mutex_unlock(&prepare_lock); + + return; +} + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @name: clock name + * @ops: operations this clock supports + * @hw: link to hardware-specific clock data + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. + */ +struct clk *clk_register(struct device *dev, const char *name, + const struct clk_ops *ops, struct clk_hw *hw, + char **parent_names, u8 num_parents, unsigned long flags) +{ + struct clk *clk; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + if (!clk) + return NULL; + + clk->name = name; + clk->ops = ops; + clk->hw = hw; + clk->flags = flags; + clk->parent_names = parent_names; + clk->num_parents = num_parents; + hw->clk = clk; + + __clk_init(dev, clk); + + return clk; +} +EXPORT_SYMBOL_GPL(clk_register); + +/*** clk rate change notifiers ***/ + +/** + * clk_notifier_register - add a clk rate change notifier + * @clk: struct clk * to watch + * @nb: struct notifier_block * with callback info + * + * Request notification when clk's rate changes. This uses an SRCU + * notifier because we want it to block and notifier unregistrations are + * uncommon. The callbacks associated with the notifier must not + * re-enter into the clk framework by calling any top-level clk APIs; + * this will cause a nested prepare_lock mutex. + * + * Pre-change notifier callbacks will be passed the current, pre-change + * rate of the clk via struct clk_notifier_data.old_rate. The new, + * post-change rate of the clk is passed via struct + * clk_notifier_data.new_rate. + * + * Post-change notifiers will pass the now-current, post-change rate of + * the clk in both struct clk_notifier_data.old_rate and struct + * clk_notifier_data.new_rate. + * + * Abort-change notifiers are effectively the opposite of pre-change + * notifiers: the original pre-change clk rate is passed in via struct + * clk_notifier_data.new_rate and the failed post-change rate is passed + * in via struct clk_notifier_data.old_rate. + * + * clk_notifier_register() must be called from non-atomic context. + * Returns -EINVAL if called with null arguments, -ENOMEM upon + * allocation failure; otherwise, passes along the return value of + * srcu_notifier_chain_register(). + */ +int clk_notifier_register(struct clk *clk, struct notifier_block *nb) +{ + struct clk_notifier *cn; + int ret = -ENOMEM; + + if (!clk || !nb) + return -EINVAL; + + mutex_lock(&prepare_lock); + + /* search the list of notifiers for this clk */ + list_for_each_entry(cn, &clk_notifier_list, node) + if (cn->clk == clk) + break; + + /* if clk wasn't in the notifier list, allocate new clk_notifier */ + if (cn->clk != clk) { + cn = kzalloc(sizeof(struct clk_notifier), GFP_KERNEL); + if (!cn) + goto out; + + cn->clk = clk; + srcu_init_notifier_head(&cn->notifier_head); + + list_add(&cn->node, &clk_notifier_list); + } + + ret = srcu_notifier_chain_register(&cn->notifier_head, nb); + + clk->notifier_count++; + +out: + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_notifier_register); + +/** + * clk_notifier_unregister - remove a clk rate change notifier + * @clk: struct clk * + * @nb: struct notifier_block * with callback info + * + * Request no further notification for changes to 'clk' and frees memory + * allocated in clk_notifier_register. + * + * Returns -EINVAL if called with null arguments; otherwise, passes + * along the return value of srcu_notifier_chain_unregister(). + */ +int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb) +{ + struct clk_notifier *cn = NULL; + int ret = -EINVAL; + + if (!clk || !nb) + return -EINVAL; + + mutex_lock(&prepare_lock); + + list_for_each_entry(cn, &clk_notifier_list, node) + if (cn->clk == clk) + break; + + if (cn->clk == clk) { + ret = srcu_notifier_chain_unregister(&cn->notifier_head, nb); + + clk->notifier_count--; + + /* XXX the notifier code should handle this better */ + if (!cn->notifier_head.head) { + srcu_cleanup_notifier_head(&cn->notifier_head); + kfree(cn); + } + + } else { + ret = -ENOENT; + } + + mutex_unlock(&prepare_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_notifier_unregister); diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h new file mode 100644 index 00000000000..e2cce6fa604 --- /dev/null +++ b/include/linux/clk-private.h @@ -0,0 +1,72 @@ +/* + * linux/include/linux/clk-private.h + * + * Copyright (c) 2010-2011 Jeremy Kerr + * Copyright (C) 2011-2012 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PRIVATE_H +#define __LINUX_CLK_PRIVATE_H + +#include +#include + +/* + * WARNING: Do not include clk-private.h from any file that implements struct + * clk_ops. Doing so is a layering violation! + * + * This header exists only to allow for statically initialized clock data. Any + * static clock data must be defined in a separate file from the logic that + * implements the clock operations for that same data. + */ + +#ifdef CONFIG_COMMON_CLK + +struct clk { + const char *name; + const struct clk_ops *ops; + struct clk_hw *hw; + struct clk *parent; + char **parent_names; + struct clk **parents; + u8 num_parents; + unsigned long rate; + unsigned long new_rate; + unsigned long flags; + unsigned int enable_count; + unsigned int prepare_count; + struct hlist_head children; + struct hlist_node child_node; + unsigned int notifier_count; +#ifdef CONFIG_COMMON_CLK_DEBUG + struct dentry *dentry; +#endif +}; + +/** + * __clk_init - initialize the data structures in a struct clk + * @dev: device initializing this clk, placeholder for now + * @clk: clk being initialized + * + * Initializes the lists in struct clk, queries the hardware for the + * parent and rate and sets them both. + * + * Any struct clk passed into __clk_init must have the following members + * populated: + * .name + * .ops + * .hw + * .parent_names + * .num_parents + * .flags + * + * It is not necessary to call clk_register if __clk_init is used directly with + * statically initialized clock data. + */ +void __clk_init(struct device *dev, struct clk *clk); + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PRIVATE_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h new file mode 100644 index 00000000000..b18b0e7888a --- /dev/null +++ b/include/linux/clk-provider.h @@ -0,0 +1,173 @@ +/* + * linux/include/linux/clk-provider.h + * + * Copyright (c) 2010-2011 Jeremy Kerr + * Copyright (C) 2011-2012 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_CLK_PROVIDER_H +#define __LINUX_CLK_PROVIDER_H + +#include + +#ifdef CONFIG_COMMON_CLK + +/** + * struct clk_hw - handle for traversing from a struct clk to its corresponding + * hardware-specific structure. struct clk_hw should be declared within struct + * clk_foo and then referenced by the struct clk instance that uses struct + * clk_foo's clk_ops + * + * clk: pointer to the struct clk instance that points back to this struct + * clk_hw instance + */ +struct clk_hw { + struct clk *clk; +}; + +/* + * flags used across common struct clk. these flags should only affect the + * top-level framework. custom flags for dealing with hardware specifics + * belong in struct clk_foo + */ +#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */ +#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */ +#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ +#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ +#define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ + +/** + * struct clk_ops - Callback operations for hardware clocks; these are to + * be provided by the clock implementation, and will be called by drivers + * through the clk_* api. + * + * @prepare: Prepare the clock for enabling. This must not return until + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. + * + * @unprepare: Release the clock from its prepared state. This will typically + * undo any work done in the @prepare callback. Called with + * prepare_lock held. + * + * @enable: Enable the clock atomically. This must not return until the + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. + * + * @disable: Disable the clock atomically. Called with enable_lock held. + * This function must not sleep. + * + * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * parent rate is an input parameter. It is up to the caller to + * insure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. + * + * @round_rate: Given a target rate as input, returns the closest rate actually + * supported by the clock. + * + * @get_parent: Queries the hardware to determine the parent of a clock. The + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. + * + * @set_parent: Change the input source of this clock; for clocks with multiple + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * + * @set_rate: Change the rate of this clock. If this callback returns + * CLK_SET_RATE_PARENT, the rate change will be propagated to the + * parent clock (which may propagate again if the parent clock + * also sets this flag). The requested rate of the parent is + * passed back from the callback in the second 'unsigned long *' + * argument. Note that it is up to the hardware clock's set_rate + * implementation to insure that clocks do not run out of spec + * when propgating the call to set_rate up to the parent. One way + * to do this is to gate the clock (via clk_disable and/or + * clk_unprepare) before calling clk_set_rate, then ungating it + * afterward. If your clock also has the CLK_GATE_SET_RATE flag + * set then this will insure safety. Returns 0 on success, + * -EERROR otherwise. + * + * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow + * implementations to split any work between atomic (enable) and sleepable + * (prepare) contexts. If enabling a clock requires code that might sleep, + * this must be done in clk_prepare. Clock enable code that will never be + * called in a sleepable context may be implement in clk_enable. + * + * Typically, drivers will call clk_prepare when a clock may be needed later + * (eg. when a device is opened), and clk_enable when the clock is actually + * required (eg. from an interrupt). Note that clk_prepare MUST have been + * called before clk_enable. + */ +struct clk_ops { + int (*prepare)(struct clk_hw *hw); + void (*unprepare)(struct clk_hw *hw); + int (*enable)(struct clk_hw *hw); + void (*disable)(struct clk_hw *hw); + int (*is_enabled)(struct clk_hw *hw); + unsigned long (*recalc_rate)(struct clk_hw *hw, + unsigned long parent_rate); + long (*round_rate)(struct clk_hw *hw, unsigned long, + unsigned long *); + int (*set_parent)(struct clk_hw *hw, u8 index); + u8 (*get_parent)(struct clk_hw *hw); + int (*set_rate)(struct clk_hw *hw, unsigned long); + void (*init)(struct clk_hw *hw); +}; + + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @name: clock name + * @ops: operations this clock supports + * @hw: link to hardware-specific clock data + * @parent_names: array of string names for all possible parents + * @num_parents: number of possible parents + * @flags: framework-level hints and quirks + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. + */ +struct clk *clk_register(struct device *dev, const char *name, + const struct clk_ops *ops, struct clk_hw *hw, + char **parent_names, u8 num_parents, unsigned long flags); + +/* helper functions */ +const char *__clk_get_name(struct clk *clk); +struct clk_hw *__clk_get_hw(struct clk *clk); +u8 __clk_get_num_parents(struct clk *clk); +struct clk *__clk_get_parent(struct clk *clk); +inline int __clk_get_enable_count(struct clk *clk); +inline int __clk_get_prepare_count(struct clk *clk); +unsigned long __clk_get_rate(struct clk *clk); +unsigned long __clk_get_flags(struct clk *clk); +int __clk_is_enabled(struct clk *clk); +struct clk *__clk_lookup(const char *name); + +/* + * FIXME clock api without lock protection + */ +int __clk_prepare(struct clk *clk); +void __clk_unprepare(struct clk *clk); +void __clk_reparent(struct clk *clk, struct clk *new_parent); +unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); + +#endif /* CONFIG_COMMON_CLK */ +#endif /* CLK_PROVIDER_H */ diff --git a/include/linux/clk.h b/include/linux/clk.h index b9d46fa154b..b0252726df6 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -3,6 +3,7 @@ * * Copyright (C) 2004 ARM Limited. * Written by Deep Blue Solutions Limited. + * Copyright (C) 2011-2012 Linaro Ltd * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,18 +13,75 @@ #define __LINUX_CLK_H #include +#include struct device; -/* - * The base API. +struct clk; + +#ifdef CONFIG_COMMON_CLK + +/** + * DOC: clk notifier callback types + * + * PRE_RATE_CHANGE - called immediately before the clk rate is changed, + * to indicate that the rate change will proceed. Drivers must + * immediately terminate any operations that will be affected by the + * rate change. Callbacks may either return NOTIFY_DONE or + * NOTIFY_STOP. + * + * ABORT_RATE_CHANGE: called if the rate change failed for some reason + * after PRE_RATE_CHANGE. In this case, all registered notifiers on + * the clk will be called with ABORT_RATE_CHANGE. Callbacks must + * always return NOTIFY_DONE. + * + * POST_RATE_CHANGE - called after the clk rate change has successfully + * completed. Callbacks must always return NOTIFY_DONE. + * */ +#define PRE_RATE_CHANGE BIT(0) +#define POST_RATE_CHANGE BIT(1) +#define ABORT_RATE_CHANGE BIT(2) +/** + * struct clk_notifier - associate a clk with a notifier + * @clk: struct clk * to associate the notifier with + * @notifier_head: a blocking_notifier_head for this clk + * @node: linked list pointers + * + * A list of struct clk_notifier is maintained by the notifier code. + * An entry is created whenever code registers the first notifier on a + * particular @clk. Future notifiers on that @clk are added to the + * @notifier_head. + */ +struct clk_notifier { + struct clk *clk; + struct srcu_notifier_head notifier_head; + struct list_head node; +}; -/* - * struct clk - an machine class defined object / cookie. +/** + * struct clk_notifier_data - rate data to pass to the notifier callback + * @clk: struct clk * being changed + * @old_rate: previous rate of this clk + * @new_rate: new rate of this clk + * + * For a pre-notifier, old_rate is the clk's rate before this rate + * change, and new_rate is what the rate will be in the future. For a + * post-notifier, old_rate and new_rate are both set to the clk's + * current rate (this was done to optimize the implementation). */ -struct clk; +struct clk_notifier_data { + struct clk *clk; + unsigned long old_rate; + unsigned long new_rate; +}; + +int clk_notifier_register(struct clk *clk, struct notifier_block *nb); + +int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); + +#endif /* !CONFIG_COMMON_CLK */ /** * clk_get - lookup and obtain a reference to a clock producer. -- cgit v1.2.3-70-g09d2 From 9d9f78ed9af0e465d2fd15550471956e7f559b9f Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Thu, 15 Mar 2012 23:11:20 -0700 Subject: clk: basic clock hardware types Many platforms support simple gateable clocks, fixed-rate clocks, adjustable divider clocks and multi-parent multiplexer clocks. This patch introduces basic clock types for the above-mentioned hardware which share some common characteristics. Based on original work by Jeremy Kerr and contribution by Jamie Iles. Dividers and multiplexor clocks originally contributed by Richard Zhao & Sascha Hauer. Signed-off-by: Mike Turquette Signed-off-by: Mike Turquette Reviewed-by: Andrew Lunn Tested-by: Andrew Lunn Reviewed-by: Rob Herring Cc: Russell King Cc: Jeremy Kerr Cc: Thomas Gleixner Cc: Arnd Bergman Cc: Paul Walmsley Cc: Shawn Guo Cc: Sascha Hauer Cc: Jamie Iles Cc: Richard Zhao Cc: Saravana Kannan Cc: Magnus Damm Cc: Mark Brown Cc: Linus Walleij Cc: Stephen Boyd Cc: Amit Kucheria Cc: Deepak Saxena Cc: Grant Likely Signed-off-by: Arnd Bergmann --- drivers/clk/Makefile | 3 +- drivers/clk/clk-divider.c | 200 +++++++++++++++++++++++++++++++++++++++++++ drivers/clk/clk-fixed-rate.c | 82 ++++++++++++++++++ drivers/clk/clk-gate.c | 150 ++++++++++++++++++++++++++++++++ drivers/clk/clk-mux.c | 116 +++++++++++++++++++++++++ include/linux/clk-private.h | 124 +++++++++++++++++++++++++++ include/linux/clk-provider.h | 127 +++++++++++++++++++++++++++ 7 files changed, 801 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/clk-divider.c create mode 100644 drivers/clk/clk-fixed-rate.c create mode 100644 drivers/clk/clk-gate.c create mode 100644 drivers/clk/clk-mux.c (limited to 'include/linux') diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index ff362c4fb4c..1f736bc11c4 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o -obj-$(CONFIG_COMMON_CLK) += clk.o +obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ + clk-mux.o clk-divider.o diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c new file mode 100644 index 00000000000..d5ac6a75ea5 --- /dev/null +++ b/drivers/clk/clk-divider.c @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2011 Sascha Hauer, Pengutronix + * Copyright (C) 2011 Richard Zhao, Linaro + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adjustable divider clock implementation + */ + +#include +#include +#include +#include +#include +#include + +/* + * DOC: basic adjustable divider clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = parent->rate / divisor + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) + +#define div_mask(d) ((1 << (d->width)) - 1) + +static unsigned long clk_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int div; + + div = readl(divider->reg) >> divider->shift; + div &= div_mask(divider); + + if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) + div++; + + return parent_rate / div; +} +EXPORT_SYMBOL_GPL(clk_divider_recalc_rate); + +/* + * The reverse of DIV_ROUND_UP: The maximum number which + * divided by m is r + */ +#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1) + +static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + int i, bestdiv = 0; + unsigned long parent_rate, best = 0, now, maxdiv; + + if (!rate) + rate = 1; + + maxdiv = (1 << divider->width); + + if (divider->flags & CLK_DIVIDER_ONE_BASED) + maxdiv--; + + if (!best_parent_rate) { + parent_rate = __clk_get_rate(__clk_get_parent(hw->clk)); + bestdiv = DIV_ROUND_UP(parent_rate, rate); + bestdiv = bestdiv == 0 ? 1 : bestdiv; + bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; + return bestdiv; + } + + /* + * The maximum divider we can use without overflowing + * unsigned long in rate * i below + */ + maxdiv = min(ULONG_MAX / rate, maxdiv); + + for (i = 1; i <= maxdiv; i++) { + parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), + MULT_ROUND_UP(rate, i)); + now = parent_rate / i; + if (now <= rate && now > best) { + bestdiv = i; + best = now; + *best_parent_rate = parent_rate; + } + } + + if (!bestdiv) { + bestdiv = (1 << divider->width); + if (divider->flags & CLK_DIVIDER_ONE_BASED) + bestdiv--; + *best_parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), 1); + } + + return bestdiv; +} + +static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + int div; + div = clk_divider_bestdiv(hw, rate, prate); + + if (prate) + return *prate / div; + else { + unsigned long r; + r = __clk_get_rate(__clk_get_parent(hw->clk)); + return r / div; + } +} +EXPORT_SYMBOL_GPL(clk_divider_round_rate); + +static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int div; + unsigned long flags = 0; + u32 val; + + div = __clk_get_rate(__clk_get_parent(hw->clk)) / rate; + + if (!(divider->flags & CLK_DIVIDER_ONE_BASED)) + div--; + + if (div > div_mask(divider)) + div = div_mask(divider); + + if (divider->lock) + spin_lock_irqsave(divider->lock, flags); + + val = readl(divider->reg); + val &= ~(div_mask(divider) << divider->shift); + val |= div << divider->shift; + writel(val, divider->reg); + + if (divider->lock) + spin_unlock_irqrestore(divider->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_divider_set_rate); + +struct clk_ops clk_divider_ops = { + .recalc_rate = clk_divider_recalc_rate, + .round_rate = clk_divider_round_rate, + .set_rate = clk_divider_set_rate, +}; +EXPORT_SYMBOL_GPL(clk_divider_ops); + +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock) +{ + struct clk_divider *div; + struct clk *clk; + + div = kzalloc(sizeof(struct clk_divider), GFP_KERNEL); + + if (!div) { + pr_err("%s: could not allocate divider clk\n", __func__); + return NULL; + } + + /* struct clk_divider assignments */ + div->reg = reg; + div->shift = shift; + div->width = width; + div->flags = clk_divider_flags; + div->lock = lock; + + if (parent_name) { + div->parent[0] = kstrdup(parent_name, GFP_KERNEL); + if (!div->parent[0]) + goto out; + } + + clk = clk_register(dev, name, + &clk_divider_ops, &div->hw, + div->parent, + (parent_name ? 1 : 0), + flags); + if (clk) + return clk; + +out: + kfree(div->parent[0]); + kfree(div); + + return NULL; +} diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c new file mode 100644 index 00000000000..90c79fb5d1b --- /dev/null +++ b/drivers/clk/clk-fixed-rate.c @@ -0,0 +1,82 @@ +/* + * Copyright (C) 2010-2011 Canonical Ltd + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Fixed rate clock implementation + */ + +#include +#include +#include +#include +#include + +/* + * DOC: basic fixed-rate clock that cannot gate + * + * Traits of this clock: + * prepare - clk_(un)prepare only ensures parents are prepared + * enable - clk_enable only ensures parents are enabled + * rate - rate is always a fixed value. No clk_set_rate support + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw) + +static unsigned long clk_fixed_rate_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return to_clk_fixed_rate(hw)->fixed_rate; +} +EXPORT_SYMBOL_GPL(clk_fixed_rate_recalc_rate); + +struct clk_ops clk_fixed_rate_ops = { + .recalc_rate = clk_fixed_rate_recalc_rate, +}; +EXPORT_SYMBOL_GPL(clk_fixed_rate_ops); + +struct clk *clk_register_fixed_rate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned long fixed_rate) +{ + struct clk_fixed_rate *fixed; + char **parent_names = NULL; + u8 len; + + fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); + + if (!fixed) { + pr_err("%s: could not allocate fixed clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_fixed_rate assignments */ + fixed->fixed_rate = fixed_rate; + + if (parent_name) { + parent_names = kmalloc(sizeof(char *), GFP_KERNEL); + + if (! parent_names) + goto out; + + len = sizeof(char) * strlen(parent_name); + + parent_names[0] = kmalloc(len, GFP_KERNEL); + + if (!parent_names[0]) + goto out; + + strncpy(parent_names[0], parent_name, len); + } + +out: + return clk_register(dev, name, + &clk_fixed_rate_ops, &fixed->hw, + parent_names, + (parent_name ? 1 : 0), + flags); +} diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c new file mode 100644 index 00000000000..b5902e2ef2f --- /dev/null +++ b/drivers/clk/clk-gate.c @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2010-2011 Canonical Ltd + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Gated clock implementation + */ + +#include +#include +#include +#include +#include +#include + +/** + * DOC: basic gatable clock which can gate and ungate it's ouput + * + * Traits of this clock: + * prepare - clk_(un)prepare only ensures parent is (un)prepared + * enable - clk_enable and clk_disable are functional & control gating + * rate - inherits rate from parent. No clk_set_rate support + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) + +static void clk_gate_set_bit(struct clk_gate *gate) +{ + u32 reg; + unsigned long flags = 0; + + if (gate->lock) + spin_lock_irqsave(gate->lock, flags); + + reg = readl(gate->reg); + reg |= BIT(gate->bit_idx); + writel(reg, gate->reg); + + if (gate->lock) + spin_unlock_irqrestore(gate->lock, flags); +} + +static void clk_gate_clear_bit(struct clk_gate *gate) +{ + u32 reg; + unsigned long flags = 0; + + if (gate->lock) + spin_lock_irqsave(gate->lock, flags); + + reg = readl(gate->reg); + reg &= ~BIT(gate->bit_idx); + writel(reg, gate->reg); + + if (gate->lock) + spin_unlock_irqrestore(gate->lock, flags); +} + +static int clk_gate_enable(struct clk_hw *hw) +{ + struct clk_gate *gate = to_clk_gate(hw); + + if (gate->flags & CLK_GATE_SET_TO_DISABLE) + clk_gate_clear_bit(gate); + else + clk_gate_set_bit(gate); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_gate_enable); + +static void clk_gate_disable(struct clk_hw *hw) +{ + struct clk_gate *gate = to_clk_gate(hw); + + if (gate->flags & CLK_GATE_SET_TO_DISABLE) + clk_gate_set_bit(gate); + else + clk_gate_clear_bit(gate); +} +EXPORT_SYMBOL_GPL(clk_gate_disable); + +static int clk_gate_is_enabled(struct clk_hw *hw) +{ + u32 reg; + struct clk_gate *gate = to_clk_gate(hw); + + reg = readl(gate->reg); + + /* if a set bit disables this clk, flip it before masking */ + if (gate->flags & CLK_GATE_SET_TO_DISABLE) + reg ^= BIT(gate->bit_idx); + + reg &= BIT(gate->bit_idx); + + return reg ? 1 : 0; +} +EXPORT_SYMBOL_GPL(clk_gate_is_enabled); + +struct clk_ops clk_gate_ops = { + .enable = clk_gate_enable, + .disable = clk_gate_disable, + .is_enabled = clk_gate_is_enabled, +}; +EXPORT_SYMBOL_GPL(clk_gate_ops); + +struct clk *clk_register_gate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 bit_idx, + u8 clk_gate_flags, spinlock_t *lock) +{ + struct clk_gate *gate; + struct clk *clk; + + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + + if (!gate) { + pr_err("%s: could not allocate gated clk\n", __func__); + return NULL; + } + + /* struct clk_gate assignments */ + gate->reg = reg; + gate->bit_idx = bit_idx; + gate->flags = clk_gate_flags; + gate->lock = lock; + + if (parent_name) { + gate->parent[0] = kstrdup(parent_name, GFP_KERNEL); + if (!gate->parent[0]) + goto out; + } + + clk = clk_register(dev, name, + &clk_gate_ops, &gate->hw, + gate->parent, + (parent_name ? 1 : 0), + flags); + if (clk) + return clk; +out: + kfree(gate->parent[0]); + kfree(gate); + + return NULL; +} diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c new file mode 100644 index 00000000000..c71ad1f41a9 --- /dev/null +++ b/drivers/clk/clk-mux.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2011 Sascha Hauer, Pengutronix + * Copyright (C) 2011 Richard Zhao, Linaro + * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simple multiplexer clock implementation + */ + +#include +#include +#include +#include +#include +#include + +/* + * DOC: basic adjustable multiplexer clock that cannot gate + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is only affected by parent switching. No clk_set_rate support + * parent - parent is adjustable through clk_set_parent + */ + +#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) + +static u8 clk_mux_get_parent(struct clk_hw *hw) +{ + struct clk_mux *mux = to_clk_mux(hw); + u32 val; + + /* + * FIXME need a mux-specific flag to determine if val is bitwise or numeric + * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1 + * to 0x7 (index starts at one) + * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so + * val = 0x4 really means "bit 2, index starts at bit 0" + */ + val = readl(mux->reg) >> mux->shift; + val &= (1 << mux->width) - 1; + + if (val && (mux->flags & CLK_MUX_INDEX_BIT)) + val = ffs(val) - 1; + + if (val && (mux->flags & CLK_MUX_INDEX_ONE)) + val--; + + if (val >= __clk_get_num_parents(hw->clk)) + return -EINVAL; + + return val; +} +EXPORT_SYMBOL_GPL(clk_mux_get_parent); + +static int clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_mux *mux = to_clk_mux(hw); + u32 val; + unsigned long flags = 0; + + if (mux->flags & CLK_MUX_INDEX_BIT) + index = (1 << ffs(index)); + + if (mux->flags & CLK_MUX_INDEX_ONE) + index++; + + if (mux->lock) + spin_lock_irqsave(mux->lock, flags); + + val = readl(mux->reg); + val &= ~(((1 << mux->width) - 1) << mux->shift); + val |= index << mux->shift; + writel(val, mux->reg); + + if (mux->lock) + spin_unlock_irqrestore(mux->lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(clk_mux_set_parent); + +struct clk_ops clk_mux_ops = { + .get_parent = clk_mux_get_parent, + .set_parent = clk_mux_set_parent, +}; +EXPORT_SYMBOL_GPL(clk_mux_ops); + +struct clk *clk_register_mux(struct device *dev, const char *name, + char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock) +{ + struct clk_mux *mux; + + mux = kmalloc(sizeof(struct clk_mux), GFP_KERNEL); + + if (!mux) { + pr_err("%s: could not allocate mux clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* struct clk_mux assignments */ + mux->reg = reg; + mux->shift = shift; + mux->width = width; + mux->flags = clk_mux_flags; + mux->lock = lock; + + return clk_register(dev, name, &clk_mux_ops, &mux->hw, + parent_names, num_parents, flags); +} diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index e2cce6fa604..5e4312b6f5c 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -46,6 +46,130 @@ struct clk { #endif }; +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +extern struct clk_ops clk_fixed_rate_ops; + +#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate, \ + _fixed_rate_flags) \ + static struct clk _name; \ + static char *_name##_parent_names[] = {}; \ + static struct clk_fixed_rate _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .fixed_rate = _rate, \ + .flags = _fixed_rate_flags, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_fixed_rate_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_gate_ops; + +#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _bit_idx, \ + _gate_flags, _lock) \ + static struct clk _name; \ + static char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_gate _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .bit_idx = _bit_idx, \ + .flags = _gate_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_gate_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .parents = _name##_parents, \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_divider_ops; + +#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \ + _flags, _reg, _shift, _width, \ + _divider_flags, _lock) \ + static struct clk _name; \ + static char *_name##_parent_names[] = { \ + _parent_name, \ + }; \ + static struct clk *_name##_parents[] = { \ + _parent_ptr, \ + }; \ + static struct clk_divider _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .shift = _shift, \ + .width = _width, \ + .flags = _divider_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_divider_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _name##_parent_names, \ + .num_parents = \ + ARRAY_SIZE(_name##_parent_names), \ + .parents = _name##_parents, \ + .flags = _flags, \ + }; + +extern struct clk_ops clk_mux_ops; + +#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags, \ + _reg, _shift, _width, \ + _mux_flags, _lock) \ + static struct clk _name; \ + static struct clk_mux _name##_hw = { \ + .hw = { \ + .clk = &_name, \ + }, \ + .reg = _reg, \ + .shift = _shift, \ + .width = _width, \ + .flags = _mux_flags, \ + .lock = _lock, \ + }; \ + static struct clk _name = { \ + .name = #_name, \ + .ops = &clk_mux_ops, \ + .hw = &_name##_hw.hw, \ + .parent_names = _parent_names, \ + .num_parents = \ + ARRAY_SIZE(_parent_names), \ + .parents = _parents, \ + .flags = _flags, \ + }; + /** * __clk_init - initialize the data structures in a struct clk * @dev: device initializing this clk, placeholder for now diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index b18b0e7888a..5508897ad37 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -129,6 +129,133 @@ struct clk_ops { void (*init)(struct clk_hw *hw); }; +/* + * DOC: Basic clock implementations common to many platforms + * + * Each basic clock hardware type is comprised of a structure describing the + * clock hardware, implementations of the relevant callbacks in struct clk_ops, + * unique flags for that hardware type, a registration function and an + * alternative macro for static initialization + */ + +/** + * struct clk_fixed_rate - fixed-rate clock + * @hw: handle between common and hardware-specific interfaces + * @fixed_rate: constant frequency of clock + */ +struct clk_fixed_rate { + struct clk_hw hw; + unsigned long fixed_rate; + u8 flags; +}; + +struct clk *clk_register_fixed_rate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + unsigned long fixed_rate); + +/** + * struct clk_gate - gating clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling gate + * @bit_idx: single bit controlling gate + * @flags: hardware-specific flags + * @lock: register lock + * + * Clock which can gate its output. Implements .enable & .disable + * + * Flags: + * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock + */ +struct clk_gate { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; + char *parent[1]; +}; + +#define CLK_GATE_SET_TO_DISABLE BIT(0) + +struct clk *clk_register_gate(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 bit_idx, + u8 clk_gate_flags, spinlock_t *lock); + +/** + * struct clk_divider - adjustable divider clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register containing the divider + * @shift: shift to the divider bit field + * @width: width of the divider bit field + * @lock: register lock + * + * Clock with an adjustable divider affecting its output frequency. Implements + * .recalc_rate, .set_rate and .round_rate + * + * Flags: + * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered + * invalid + * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from + * the hardware register + */ +struct clk_divider { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; + char *parent[1]; +}; + +#define CLK_DIVIDER_ONE_BASED BIT(0) +#define CLK_DIVIDER_POWER_OF_TWO BIT(1) + +struct clk *clk_register_divider(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_divider_flags, spinlock_t *lock); + +/** + * struct clk_mux - multiplexer clock + * + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling multiplexer + * @shift: shift to multiplexer bit field + * @width: width of mutliplexer bit field + * @num_clks: number of parent clocks + * @lock: register lock + * + * Clock with multiple selectable parents. Implements .get_parent, .set_parent + * and .recalc_rate + * + * Flags: + * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 + * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two) + */ +struct clk_mux { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 flags; + spinlock_t *lock; +}; + +#define CLK_MUX_INDEX_ONE BIT(0) +#define CLK_MUX_INDEX_BIT BIT(1) + +struct clk *clk_register_mux(struct device *dev, const char *name, + char **parent_names, u8 num_parents, unsigned long flags, + void __iomem *reg, u8 shift, u8 width, + u8 clk_mux_flags, spinlock_t *lock); /** * clk_register - allocate a new clock, register it and return an opaque cookie -- cgit v1.2.3-70-g09d2 From 5375764f9408b8ef1fb8d6cd1ed0efd97dce4824 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 26 Jan 2012 12:27:22 +0100 Subject: dma-buf: Constify ops argument to dma_buf_export() This allows drivers to make the dma buf operations structure constant. Signed-off-by: Laurent Pinchart Reviewed-by: Daniel Vetter Signed-off-by: Sumit Semwal --- drivers/base/dma-buf.c | 2 +- include/linux/dma-buf.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index e38ad243b4b..965833acf0d 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -71,7 +71,7 @@ static inline int is_dma_buf_file(struct file *file) * ops, or error in allocating struct dma_buf, will return negative error. * */ -struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, +struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, size_t size, int flags) { struct dma_buf *dmabuf; diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index f8ac076afa5..86f62414104 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -114,8 +114,8 @@ struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, struct device *dev); void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *dmabuf_attach); -struct dma_buf *dma_buf_export(void *priv, struct dma_buf_ops *ops, - size_t size, int flags); +struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, + size_t size, int flags); int dma_buf_fd(struct dma_buf *dmabuf); struct dma_buf *dma_buf_get(int fd); void dma_buf_put(struct dma_buf *dmabuf); @@ -138,8 +138,8 @@ static inline void dma_buf_detach(struct dma_buf *dmabuf, } static inline struct dma_buf *dma_buf_export(void *priv, - struct dma_buf_ops *ops, - size_t size, int flags) + const struct dma_buf_ops *ops, + size_t size, int flags) { return ERR_PTR(-ENODEV); } -- cgit v1.2.3-70-g09d2 From d8ee4a1c90529ed06e1aa43d034986649f7b670b Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Mon, 19 Mar 2012 17:54:31 -0700 Subject: Input: gpio_keys - add support for interrupt only keys Some of buttons, like power-on key or onkey, may only generate interrupts when pressed and not actually be mapped as gpio in the system. Allow setting gpio to invalid value and specify IRQ instead to support such keys. The debounce timer is used not to debounce but to ignore new IRQs coming while button is kept pressed. Signed-off-by: Laxman Dewangan Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 214 +++++++++++++++++++++++++------------ include/linux/gpio_keys.h | 3 +- 2 files changed, 150 insertions(+), 67 deletions(-) (limited to 'include/linux') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 8f44f7b8c94..62bfce468f9 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -28,14 +28,18 @@ #include #include #include +#include struct gpio_button_data { const struct gpio_keys_button *button; struct input_dev *input; struct timer_list timer; struct work_struct work; - int timer_debounce; /* in msecs */ + unsigned int timer_debounce; /* in msecs */ + unsigned int irq; + spinlock_t lock; bool disabled; + bool key_pressed; }; struct gpio_keys_drvdata { @@ -114,7 +118,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) /* * Disable IRQ and possible debouncing timer. */ - disable_irq(gpio_to_irq(bdata->button->gpio)); + disable_irq(bdata->irq); if (bdata->timer_debounce) del_timer_sync(&bdata->timer); @@ -135,7 +139,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) static void gpio_keys_enable_button(struct gpio_button_data *bdata) { if (bdata->disabled) { - enable_irq(gpio_to_irq(bdata->button->gpio)); + enable_irq(bdata->irq); bdata->disabled = false; } } @@ -320,7 +324,7 @@ static struct attribute_group gpio_keys_attr_group = { .attrs = gpio_keys_attrs, }; -static void gpio_keys_report_event(struct gpio_button_data *bdata) +static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) { const struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; @@ -336,27 +340,26 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata) input_sync(input); } -static void gpio_keys_work_func(struct work_struct *work) +static void gpio_keys_gpio_work_func(struct work_struct *work) { struct gpio_button_data *bdata = container_of(work, struct gpio_button_data, work); - gpio_keys_report_event(bdata); + gpio_keys_gpio_report_event(bdata); } -static void gpio_keys_timer(unsigned long _data) +static void gpio_keys_gpio_timer(unsigned long _data) { - struct gpio_button_data *data = (struct gpio_button_data *)_data; + struct gpio_button_data *bdata = (struct gpio_button_data *)_data; - schedule_work(&data->work); + schedule_work(&bdata->work); } -static irqreturn_t gpio_keys_isr(int irq, void *dev_id) +static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; - const struct gpio_keys_button *button = bdata->button; - BUG_ON(irq != gpio_to_irq(button->gpio)); + BUG_ON(irq != bdata->irq); if (bdata->timer_debounce) mod_timer(&bdata->timer, @@ -367,6 +370,53 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) return IRQ_HANDLED; } +static void gpio_keys_irq_timer(unsigned long _data) +{ + struct gpio_button_data *bdata = (struct gpio_button_data *)_data; + struct input_dev *input = bdata->input; + unsigned long flags; + + spin_lock_irqsave(&bdata->lock, flags); + if (bdata->key_pressed) { + input_event(input, EV_KEY, bdata->button->code, 0); + input_sync(input); + bdata->key_pressed = false; + } + spin_unlock_irqrestore(&bdata->lock, flags); +} + +static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) +{ + struct gpio_button_data *bdata = dev_id; + const struct gpio_keys_button *button = bdata->button; + struct input_dev *input = bdata->input; + unsigned long flags; + + BUG_ON(irq != bdata->irq); + + spin_lock_irqsave(&bdata->lock, flags); + + if (!bdata->key_pressed) { + input_event(input, EV_KEY, button->code, 1); + input_sync(input); + + if (!bdata->timer_debounce) { + input_event(input, EV_KEY, button->code, 0); + input_sync(input); + goto out; + } + + bdata->key_pressed = true; + } + + if (bdata->timer_debounce) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(bdata->timer_debounce)); +out: + spin_unlock_irqrestore(&bdata->lock, flags); + return IRQ_HANDLED; +} + static int __devinit gpio_keys_setup_key(struct platform_device *pdev, struct input_dev *input, struct gpio_button_data *bdata, @@ -374,46 +424,79 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev, { const char *desc = button->desc ? button->desc : "gpio_keys"; struct device *dev = &pdev->dev; + irq_handler_t isr; unsigned long irqflags; int irq, error; - setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata); - INIT_WORK(&bdata->work, gpio_keys_work_func); bdata->input = input; bdata->button = button; + spin_lock_init(&bdata->lock); - error = gpio_request(button->gpio, desc); - if (error < 0) { - dev_err(dev, "failed to request GPIO %d, error %d\n", - button->gpio, error); - goto fail2; - } + if (gpio_is_valid(button->gpio)) { - error = gpio_direction_input(button->gpio); - if (error < 0) { - dev_err(dev, "failed to configure" - " direction for GPIO %d, error %d\n", - button->gpio, error); - goto fail3; - } + error = gpio_request(button->gpio, desc); + if (error < 0) { + dev_err(dev, "Failed to request GPIO %d, error %d\n", + button->gpio, error); + return error; + } - if (button->debounce_interval) { - error = gpio_set_debounce(button->gpio, - button->debounce_interval * 1000); - /* use timer if gpiolib doesn't provide debounce */ - if (error < 0) - bdata->timer_debounce = button->debounce_interval; - } + error = gpio_direction_input(button->gpio); + if (error < 0) { + dev_err(dev, + "Failed to configure direction for GPIO %d, error %d\n", + button->gpio, error); + goto fail; + } - irq = gpio_to_irq(button->gpio); - if (irq < 0) { - error = irq; - dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n", - button->gpio, error); - goto fail3; + if (button->debounce_interval) { + error = gpio_set_debounce(button->gpio, + button->debounce_interval * 1000); + /* use timer if gpiolib doesn't provide debounce */ + if (error < 0) + bdata->timer_debounce = + button->debounce_interval; + } + + irq = gpio_to_irq(button->gpio); + if (irq < 0) { + error = irq; + dev_err(dev, + "Unable to get irq number for GPIO %d, error %d\n", + button->gpio, error); + goto fail; + } + bdata->irq = irq; + + INIT_WORK(&bdata->work, gpio_keys_gpio_work_func); + setup_timer(&bdata->timer, + gpio_keys_gpio_timer, (unsigned long)bdata); + + isr = gpio_keys_gpio_isr; + irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + + } else { + if (!button->irq) { + dev_err(dev, "No IRQ specified\n"); + return -EINVAL; + } + bdata->irq = button->irq; + + if (button->type && button->type != EV_KEY) { + dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n"); + return -EINVAL; + } + + bdata->timer_debounce = button->debounce_interval; + setup_timer(&bdata->timer, + gpio_keys_irq_timer, (unsigned long)bdata); + + isr = gpio_keys_irq_isr; + irqflags = 0; } - irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + input_set_capability(input, button->type ?: EV_KEY, button->code); + /* * If platform has specified that the button can be disabled, * we don't want it to share the interrupt line. @@ -421,19 +504,19 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev, if (!button->can_disable) irqflags |= IRQF_SHARED; - error = request_any_context_irq(irq, gpio_keys_isr, irqflags, desc, bdata); + error = request_any_context_irq(bdata->irq, isr, irqflags, desc, bdata); if (error < 0) { dev_err(dev, "Unable to claim irq %d; error %d\n", - irq, error); - goto fail3; + bdata->irq, error); + goto fail; } - input_set_capability(input, button->type ?: EV_KEY, button->code); return 0; -fail3: - gpio_free(button->gpio); -fail2: +fail: + if (gpio_is_valid(button->gpio)) + gpio_free(button->gpio); + return error; } @@ -553,11 +636,12 @@ static int gpio_keys_get_devtree_pdata(struct device *dev, static void gpio_remove_key(struct gpio_button_data *bdata) { - free_irq(gpio_to_irq(bdata->button->gpio), bdata); + free_irq(bdata->irq, bdata); if (bdata->timer_debounce) del_timer_sync(&bdata->timer); cancel_work_sync(&bdata->work); - gpio_free(bdata->button->gpio); + if (gpio_is_valid(bdata->button->gpio)) + gpio_free(bdata->button->gpio); } static int __devinit gpio_keys_probe(struct platform_device *pdev) @@ -637,9 +721,12 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) goto fail3; } - /* get current state of buttons */ - for (i = 0; i < pdata->nbuttons; i++) - gpio_keys_report_event(&ddata->data[i]); + /* get current state of buttons that are connected to GPIOs */ + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_button_data *bdata = &ddata->data[i]; + if (gpio_is_valid(bdata->button->gpio)) + gpio_keys_gpio_report_event(bdata); + } input_sync(input); device_init_wakeup(&pdev->dev, wakeup); @@ -695,16 +782,13 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) static int gpio_keys_suspend(struct device *dev) { struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); - const struct gpio_keys_button *button; int i; if (device_may_wakeup(dev)) { for (i = 0; i < ddata->n_buttons; i++) { - button = ddata->data[i].button; - if (button->wakeup) { - int irq = gpio_to_irq(button->gpio); - enable_irq_wake(irq); - } + struct gpio_button_data *bdata = &ddata->data[i]; + if (bdata->button->wakeup) + enable_irq_wake(bdata->irq); } } @@ -714,17 +798,15 @@ static int gpio_keys_suspend(struct device *dev) static int gpio_keys_resume(struct device *dev) { struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); - const struct gpio_keys_button *button; int i; for (i = 0; i < ddata->n_buttons; i++) { - button = ddata->data[i].button; - if (button->wakeup && device_may_wakeup(dev)) { - int irq = gpio_to_irq(button->gpio); - disable_irq_wake(irq); - } + struct gpio_button_data *bdata = &ddata->data[i]; + if (bdata->button->wakeup && device_may_wakeup(dev)) + disable_irq_wake(bdata->irq); - gpio_keys_report_event(&ddata->data[i]); + if (gpio_is_valid(bdata->button->gpio)) + gpio_keys_gpio_report_event(bdata); } input_sync(ddata->input); diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index 004ff33ab38..a7e977ff4ab 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -6,7 +6,7 @@ struct device; struct gpio_keys_button { /* Configuration parameters */ unsigned int code; /* input event code (KEY_*, SW_*) */ - int gpio; + int gpio; /* -1 if this key does not support gpio */ int active_low; const char *desc; unsigned int type; /* input event type (EV_KEY, EV_SW, EV_ABS) */ @@ -14,6 +14,7 @@ struct gpio_keys_button { int debounce_interval; /* debounce ticks interval in msecs */ bool can_disable; int value; /* axis value for EV_ABS */ + unsigned int irq; /* Irq number in case of interrupt keys */ }; struct gpio_keys_platform_data { -- cgit v1.2.3-70-g09d2 From cf9eeac46350b8b43730b7dc5e999757bed089a4 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Wed, 14 Mar 2012 11:02:11 +0100 Subject: KVM: Convert intx_mask_lock to spin lock As kvm_notify_acked_irq calls kvm_assigned_dev_ack_irq under rcu_read_lock, we cannot use a mutex in the latter function. Switch to a spin lock to address this. Signed-off-by: Jan Kiszka Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 2 +- virt/kvm/assigned-dev.c | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index ec171c1d087..40bb1c661a6 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -556,7 +556,7 @@ struct kvm_assigned_dev_kernel { struct pci_dev *dev; struct kvm *kvm; spinlock_t intx_lock; - struct mutex intx_mask_lock; + spinlock_t intx_mask_lock; char irq_name[32]; struct pci_saved_state *pci_saved_state; }; diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c index 08e05715df7..01f572c10c7 100644 --- a/virt/kvm/assigned-dev.c +++ b/virt/kvm/assigned-dev.c @@ -77,11 +77,11 @@ kvm_assigned_dev_raise_guest_irq(struct kvm_assigned_dev_kernel *assigned_dev, { if (unlikely(assigned_dev->irq_requested_type & KVM_DEV_IRQ_GUEST_INTX)) { - mutex_lock(&assigned_dev->intx_mask_lock); + spin_lock(&assigned_dev->intx_mask_lock); if (!(assigned_dev->flags & KVM_DEV_ASSIGN_MASK_INTX)) kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, vector, 1); - mutex_unlock(&assigned_dev->intx_mask_lock); + spin_unlock(&assigned_dev->intx_mask_lock); } else kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id, vector, 1); @@ -141,7 +141,7 @@ static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) kvm_set_irq(dev->kvm, dev->irq_source_id, dev->guest_irq, 0); - mutex_lock(&dev->intx_mask_lock); + spin_lock(&dev->intx_mask_lock); if (!(dev->flags & KVM_DEV_ASSIGN_MASK_INTX)) { bool reassert = false; @@ -165,7 +165,7 @@ static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian) dev->guest_irq, 1); } - mutex_unlock(&dev->intx_mask_lock); + spin_unlock(&dev->intx_mask_lock); } static void deassign_guest_irq(struct kvm *kvm, @@ -707,7 +707,7 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm, match->flags = assigned_dev->flags; match->dev = dev; spin_lock_init(&match->intx_lock); - mutex_init(&match->intx_mask_lock); + spin_lock_init(&match->intx_mask_lock); match->irq_source_id = -1; match->kvm = kvm; match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq; @@ -868,7 +868,7 @@ static int kvm_vm_ioctl_set_pci_irq_mask(struct kvm *kvm, goto out; } - mutex_lock(&match->intx_mask_lock); + spin_lock(&match->intx_mask_lock); match->flags &= ~KVM_DEV_ASSIGN_MASK_INTX; match->flags |= assigned_dev->flags & KVM_DEV_ASSIGN_MASK_INTX; @@ -895,7 +895,7 @@ static int kvm_vm_ioctl_set_pci_irq_mask(struct kvm *kvm, } } - mutex_unlock(&match->intx_mask_lock); + spin_unlock(&match->intx_mask_lock); out: mutex_unlock(&kvm->lock); -- cgit v1.2.3-70-g09d2 From 3c33be06f9aa0949ad24e67dfcae1f2a3006f4e1 Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Fri, 16 Mar 2012 11:10:19 +0530 Subject: mfd: Add support for TPS65090 TPS65090 is a Texas Instrument PMIC. It contains 3 Step-Down converters, 2 always on LDO's and 7 current limited load switches. Signed-off-by: Venu Byravarasu Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 12 ++ drivers/mfd/Makefile | 1 + drivers/mfd/tps65090.c | 387 +++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/tps65090.h | 46 +++++ 4 files changed, 446 insertions(+) create mode 100644 drivers/mfd/tps65090.c create mode 100644 include/linux/mfd/tps65090.h (limited to 'include/linux') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ef22292aa0c..f67d20e8bc0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -827,6 +827,18 @@ config MFD_PM8XXX_IRQ config TPS65911_COMPARATOR tristate +config MFD_TPS65090 + bool "TPS65090 Power Management chips" + depends on I2C=y && GENERIC_HARDIRQS + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the TPS65090 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_AAT2870_CORE bool "Support for the AnalogicTech AAT2870" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 67f7b0e34d3..05fa538c5ef 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -110,6 +110,7 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o +obj-$(CONFIG_MFD_TPS65090) += tps65090.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c new file mode 100644 index 00000000000..a66d4df5129 --- /dev/null +++ b/drivers/mfd/tps65090.c @@ -0,0 +1,387 @@ +/* + * Core driver for TI TPS65090 PMIC family + * + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NUM_INT_REG 2 +#define TOTAL_NUM_REG 0x18 + +/* interrupt status registers */ +#define TPS65090_INT_STS 0x0 +#define TPS65090_INT_STS2 0x1 + +/* interrupt mask registers */ +#define TPS65090_INT_MSK 0x2 +#define TPS65090_INT_MSK2 0x3 + +struct tps65090_irq_data { + u8 mask_reg; + u8 mask_pos; +}; + +#define TPS65090_IRQ(_reg, _mask_pos) \ + { \ + .mask_reg = (_reg), \ + .mask_pos = (_mask_pos), \ + } + +static const struct tps65090_irq_data tps65090_irqs[] = { + [0] = TPS65090_IRQ(0, 0), + [1] = TPS65090_IRQ(0, 1), + [2] = TPS65090_IRQ(0, 2), + [3] = TPS65090_IRQ(0, 3), + [4] = TPS65090_IRQ(0, 4), + [5] = TPS65090_IRQ(0, 5), + [6] = TPS65090_IRQ(0, 6), + [7] = TPS65090_IRQ(0, 7), + [8] = TPS65090_IRQ(1, 0), + [9] = TPS65090_IRQ(1, 1), + [10] = TPS65090_IRQ(1, 2), + [11] = TPS65090_IRQ(1, 3), + [12] = TPS65090_IRQ(1, 4), + [13] = TPS65090_IRQ(1, 5), + [14] = TPS65090_IRQ(1, 6), + [15] = TPS65090_IRQ(1, 7), +}; + +static struct mfd_cell tps65090s[] = { + { + .name = "tps65910-pmic", + }, + { + .name = "tps65910-regulator", + }, +}; + +struct tps65090 { + struct mutex lock; + struct device *dev; + struct i2c_client *client; + struct regmap *rmap; + struct irq_chip irq_chip; + struct mutex irq_lock; + int irq_base; + unsigned int id; +}; + +int tps65090_write(struct device *dev, int reg, uint8_t val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_write(tps->rmap, reg, val); +} +EXPORT_SYMBOL_GPL(tps65090_write); + +int tps65090_read(struct device *dev, int reg, uint8_t *val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + unsigned int temp_val; + int ret; + ret = regmap_read(tps->rmap, reg, &temp_val); + if (!ret) + *val = temp_val; + return ret; +} +EXPORT_SYMBOL_GPL(tps65090_read); + +int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u); +} +EXPORT_SYMBOL_GPL(tps65090_set_bits); + +int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u); +} +EXPORT_SYMBOL_GPL(tps65090_clr_bits); + +static void tps65090_irq_lock(struct irq_data *data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data); + + mutex_lock(&tps65090->irq_lock); +} + +static void tps65090_irq_mask(struct irq_data *irq_data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->hwirq; + const struct tps65090_irq_data *data = &tps65090_irqs[__irq]; + + tps65090_set_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg), + data->mask_pos); +} + +static void tps65090_irq_unmask(struct irq_data *irq_data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - tps65090->irq_base; + const struct tps65090_irq_data *data = &tps65090_irqs[__irq]; + + tps65090_clr_bits(tps65090->dev, (TPS65090_INT_MSK + data->mask_reg), + data->mask_pos); +} + +static void tps65090_irq_sync_unlock(struct irq_data *data) +{ + struct tps65090 *tps65090 = irq_data_get_irq_chip_data(data); + + mutex_unlock(&tps65090->irq_lock); +} + +static irqreturn_t tps65090_irq(int irq, void *data) +{ + struct tps65090 *tps65090 = data; + int ret = 0; + u8 status, mask; + unsigned long int acks = 0; + int i; + + for (i = 0; i < NUM_INT_REG; i++) { + ret = tps65090_read(tps65090->dev, TPS65090_INT_MSK + i, &mask); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to read mask reg [addr:%d]\n", + TPS65090_INT_MSK + i); + return IRQ_NONE; + } + ret = tps65090_read(tps65090->dev, TPS65090_INT_STS + i, + &status); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to read status reg [addr:%d]\n", + TPS65090_INT_STS + i); + return IRQ_NONE; + } + if (status) { + /* Ack only those interrupts which are not masked */ + status &= (~mask); + ret = tps65090_write(tps65090->dev, + TPS65090_INT_STS + i, status); + if (ret < 0) { + dev_err(tps65090->dev, + "failed to write interrupt status\n"); + return IRQ_NONE; + } + acks |= (status << (i * 8)); + } + } + + for_each_set_bit(i, &acks, ARRAY_SIZE(tps65090_irqs)) + handle_nested_irq(tps65090->irq_base + i); + return acks ? IRQ_HANDLED : IRQ_NONE; +} + +static int __devinit tps65090_irq_init(struct tps65090 *tps65090, int irq, + int irq_base) +{ + int i, ret; + + if (!irq_base) { + dev_err(tps65090->dev, "IRQ base not set\n"); + return -EINVAL; + } + + mutex_init(&tps65090->irq_lock); + + for (i = 0; i < NUM_INT_REG; i++) + tps65090_write(tps65090->dev, TPS65090_INT_MSK + i, 0xFF); + + for (i = 0; i < NUM_INT_REG; i++) + tps65090_write(tps65090->dev, TPS65090_INT_STS + i, 0xff); + + tps65090->irq_base = irq_base; + tps65090->irq_chip.name = "tps65090"; + tps65090->irq_chip.irq_mask = tps65090_irq_mask; + tps65090->irq_chip.irq_unmask = tps65090_irq_unmask; + tps65090->irq_chip.irq_bus_lock = tps65090_irq_lock; + tps65090->irq_chip.irq_bus_sync_unlock = tps65090_irq_sync_unlock; + + for (i = 0; i < ARRAY_SIZE(tps65090_irqs); i++) { + int __irq = i + tps65090->irq_base; + irq_set_chip_data(__irq, tps65090); + irq_set_chip_and_handler(__irq, &tps65090->irq_chip, + handle_simple_irq); + irq_set_nested_thread(__irq, 1); +#ifdef CONFIG_ARM + set_irq_flags(__irq, IRQF_VALID); +#endif + } + + ret = request_threaded_irq(irq, NULL, tps65090_irq, IRQF_ONESHOT, + "tps65090", tps65090); + if (!ret) { + device_init_wakeup(tps65090->dev, 1); + enable_irq_wake(irq); + } + + return ret; +} + +static bool is_volatile_reg(struct device *dev, unsigned int reg) +{ + if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS)) + return true; + else + return false; +} + +static const struct regmap_config tps65090_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TOTAL_NUM_REG, + .num_reg_defaults_raw = TOTAL_NUM_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = is_volatile_reg, +}; + +static int __devinit tps65090_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tps65090_platform_data *pdata = client->dev.platform_data; + struct tps65090 *tps65090; + int ret; + + if (!pdata) { + dev_err(&client->dev, "tps65090 requires platform data\n"); + return -EINVAL; + } + + tps65090 = devm_kzalloc(&client->dev, sizeof(struct tps65090), + GFP_KERNEL); + if (tps65090 == NULL) + return -ENOMEM; + + tps65090->client = client; + tps65090->dev = &client->dev; + i2c_set_clientdata(client, tps65090); + + mutex_init(&tps65090->lock); + + if (client->irq) { + ret = tps65090_irq_init(tps65090, client->irq, pdata->irq_base); + if (ret) { + dev_err(&client->dev, "IRQ init failed with err: %d\n", + ret); + goto err_exit; + } + } + + tps65090->rmap = regmap_init_i2c(tps65090->client, + &tps65090_regmap_config); + if (IS_ERR(tps65090->rmap)) { + dev_err(&client->dev, "regmap_init failed with err: %ld\n", + PTR_ERR(tps65090->rmap)); + goto err_irq_exit; + }; + + ret = mfd_add_devices(tps65090->dev, -1, tps65090s, + ARRAY_SIZE(tps65090s), NULL, 0); + if (ret) { + dev_err(&client->dev, "add mfd devices failed with err: %d\n", + ret); + goto err_regmap_exit; + } + + return 0; + +err_regmap_exit: + regmap_exit(tps65090->rmap); + +err_irq_exit: + if (client->irq) + free_irq(client->irq, tps65090); +err_exit: + return ret; +} + +static int __devexit tps65090_i2c_remove(struct i2c_client *client) +{ + struct tps65090 *tps65090 = i2c_get_clientdata(client); + + mfd_remove_devices(tps65090->dev); + regmap_exit(tps65090->rmap); + if (client->irq) + free_irq(client->irq, tps65090); + + return 0; +} + +#ifdef CONFIG_PM +static int tps65090_i2c_suspend(struct i2c_client *client, pm_message_t state) +{ + if (client->irq) + disable_irq(client->irq); + return 0; +} + +static int tps65090_i2c_resume(struct i2c_client *client) +{ + if (client->irq) + enable_irq(client->irq); + return 0; +} +#endif + +static const struct i2c_device_id tps65090_id_table[] = { + { "tps65090", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tps65090_id_table); + +static struct i2c_driver tps65090_driver = { + .driver = { + .name = "tps65090", + .owner = THIS_MODULE, + }, + .probe = tps65090_i2c_probe, + .remove = __devexit_p(tps65090_i2c_remove), +#ifdef CONFIG_PM + .suspend = tps65090_i2c_suspend, + .resume = tps65090_i2c_resume, +#endif + .id_table = tps65090_id_table, +}; + +static int __init tps65090_init(void) +{ + return i2c_add_driver(&tps65090_driver); +} +subsys_initcall(tps65090_init); + +static void __exit tps65090_exit(void) +{ + i2c_del_driver(&tps65090_driver); +} +module_exit(tps65090_exit); + +MODULE_DESCRIPTION("TPS65090 core driver"); +MODULE_AUTHOR("Venu Byravarasu "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h new file mode 100644 index 00000000000..38e31c55adb --- /dev/null +++ b/include/linux/mfd/tps65090.h @@ -0,0 +1,46 @@ +/* + * Core driver interface for TI TPS65090 PMIC family + * + * Copyright (C) 2012 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_MFD_TPS65090_H +#define __LINUX_MFD_TPS65090_H + +struct tps65090_subdev_info { + int id; + const char *name; + void *platform_data; +}; + +struct tps65090_platform_data { + int irq_base; + int num_subdevs; + struct tps65090_subdev_info *subdevs; +}; + +/* + * NOTE: the functions below are not intended for use outside + * of the TPS65090 sub-device drivers + */ +extern int tps65090_write(struct device *dev, int reg, uint8_t val); +extern int tps65090_read(struct device *dev, int reg, uint8_t *val); +extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num); +extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num); + +#endif /*__LINUX_MFD_TPS65090_H */ -- cgit v1.2.3-70-g09d2 From f39eaa674bc3747c94abadbc46b6d389953e64b8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Jan 2012 17:37:36 +0000 Subject: platform, x86: Kill off Moorestown All production devices operate in the Oaktrail configuration with legacy PC elements present and an ACPI BIOS. Continue stripping out the Moorestown elements from the tree leaving Medfield. Signed-off-by: Alan Cox Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 22 - drivers/platform/x86/Makefile | 1 - drivers/platform/x86/intel_rar_register.c | 669 ------------------------------ include/linux/rar_register.h | 60 --- 4 files changed, 752 deletions(-) delete mode 100644 drivers/platform/x86/intel_rar_register.c delete mode 100644 include/linux/rar_register.h (limited to 'include/linux') diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 747dfe7371a..2efd7af2a21 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -666,28 +666,6 @@ config INTEL_MFLD_THERMAL Say Y here to enable thermal driver support for the Intel Medfield platform. -config RAR_REGISTER - bool "Restricted Access Region Register Driver" - depends on PCI && X86_MRST - default n - ---help--- - This driver allows other kernel drivers access to the - contents of the restricted access region control registers. - - The restricted access region control registers - (rar_registers) are used to pass address and - locking information on restricted access regions - to other drivers that use restricted access regions. - - The restricted access regions are regions of memory - on the Intel MID Platform that are not accessible to - the x86 processor, but are accessible to dedicated - processors on board peripheral devices. - - The purpose of the restricted access regions is to - protect sensitive data from compromise by unauthorized - programs running on the x86 processor. - config INTEL_IPS tristate "Intel Intelligent Power Sharing" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 3c07f8bfd42..e072c309591 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o -obj-$(CONFIG_RAR_REGISTER) += intel_rar_register.o obj-$(CONFIG_INTEL_IPS) += intel_ips.o obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o diff --git a/drivers/platform/x86/intel_rar_register.c b/drivers/platform/x86/intel_rar_register.c deleted file mode 100644 index c8a6aed4527..00000000000 --- a/drivers/platform/x86/intel_rar_register.c +++ /dev/null @@ -1,669 +0,0 @@ -/* - * rar_register.c - An Intel Restricted Access Region register driver - * - * Copyright(c) 2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - * ------------------------------------------------------------------- - * 20091204 Mark Allyn - * Ossama Othman - * Cleanup per feedback from Alan Cox and Arjan Van De Ven - * - * 20090806 Ossama Othman - * Return zero high address if upper 22 bits is zero. - * Cleaned up checkpatch errors. - * Clarified that driver is dealing with bus addresses. - * - * 20090702 Ossama Othman - * Removed unnecessary include directives - * Cleaned up spinlocks. - * Cleaned up logging. - * Improved invalid parameter checks. - * Fixed and simplified RAR address retrieval and RAR locking - * code. - * - * 20090626 Mark Allyn - * Initial publish - */ - -#include -#include -#include -#include -#include -#include - -/* === Lincroft Message Bus Interface === */ -#define LNC_MCR_OFFSET 0xD0 /* Message Control Register */ -#define LNC_MDR_OFFSET 0xD4 /* Message Data Register */ - -/* Message Opcodes */ -#define LNC_MESSAGE_READ_OPCODE 0xD0 -#define LNC_MESSAGE_WRITE_OPCODE 0xE0 - -/* Message Write Byte Enables */ -#define LNC_MESSAGE_BYTE_WRITE_ENABLES 0xF - -/* B-unit Port */ -#define LNC_BUNIT_PORT 0x3 - -/* === Lincroft B-Unit Registers - Programmed by IA32 firmware === */ -#define LNC_BRAR0L 0x10 -#define LNC_BRAR0H 0x11 -#define LNC_BRAR1L 0x12 -#define LNC_BRAR1H 0x13 -/* Reserved for SeP */ -#define LNC_BRAR2L 0x14 -#define LNC_BRAR2H 0x15 - -/* Moorestown supports three restricted access regions. */ -#define MRST_NUM_RAR 3 - -/* RAR Bus Address Range */ -struct rar_addr { - dma_addr_t low; - dma_addr_t high; -}; - -/* - * We create one of these for each RAR - */ -struct client { - int (*callback)(unsigned long data); - unsigned long driver_priv; - bool busy; -}; - -static DEFINE_MUTEX(rar_mutex); -static DEFINE_MUTEX(lnc_reg_mutex); - -/* - * One per RAR device (currently only one device) - */ -struct rar_device { - struct rar_addr rar_addr[MRST_NUM_RAR]; - struct pci_dev *rar_dev; - bool registered; - bool allocated; - struct client client[MRST_NUM_RAR]; -}; - -/* Current platforms have only one rar_device for 3 rar regions */ -static struct rar_device my_rar_device; - -/* - * Abstract out multiple device support. Current platforms only - * have a single RAR device. - */ - -/** - * alloc_rar_device - return a new RAR structure - * - * Return a new (but not yet ready) RAR device object - */ -static struct rar_device *alloc_rar_device(void) -{ - if (my_rar_device.allocated) - return NULL; - my_rar_device.allocated = 1; - return &my_rar_device; -} - -/** - * free_rar_device - free a RAR object - * @rar: the RAR device being freed - * - * Release a RAR object and any attached resources - */ -static void free_rar_device(struct rar_device *rar) -{ - pci_dev_put(rar->rar_dev); - rar->allocated = 0; -} - -/** - * _rar_to_device - return the device handling this RAR - * @rar: RAR number - * @off: returned offset - * - * Internal helper for looking up RAR devices. This and alloc are the - * two functions that need touching to go to multiple RAR devices. - */ -static struct rar_device *_rar_to_device(int rar, int *off) -{ - if (rar >= 0 && rar < MRST_NUM_RAR) { - *off = rar; - return &my_rar_device; - } - return NULL; -} - -/** - * rar_to_device - return the device handling this RAR - * @rar: RAR number - * @off: returned offset - * - * Return the device this RAR maps to if one is present, otherwise - * returns NULL. Reports the offset relative to the base of this - * RAR device in off. - */ -static struct rar_device *rar_to_device(int rar, int *off) -{ - struct rar_device *rar_dev = _rar_to_device(rar, off); - if (rar_dev == NULL || !rar_dev->registered) - return NULL; - return rar_dev; -} - -/** - * rar_to_client - return the client handling this RAR - * @rar: RAR number - * - * Return the client this RAR maps to if a mapping is known, otherwise - * returns NULL. - */ -static struct client *rar_to_client(int rar) -{ - int idx; - struct rar_device *r = _rar_to_device(rar, &idx); - if (r != NULL) - return &r->client[idx]; - return NULL; -} - -/** - * rar_read_addr - retrieve a RAR mapping - * @pdev: PCI device for the RAR - * @offset: offset for message - * @addr: returned address - * - * Reads the address of a given RAR register. Returns 0 on success - * or an error code on failure. - */ -static int rar_read_addr(struct pci_dev *pdev, int offset, dma_addr_t *addr) -{ - /* - * ======== The Lincroft Message Bus Interface ======== - * Lincroft registers may be obtained via PCI from - * the host bridge using the Lincroft Message Bus - * Interface. That message bus interface is generally - * comprised of two registers: a control register (MCR, 0xDO) - * and a data register (MDR, 0xD4). - * - * The MCR (message control register) format is the following: - * 1. [31:24]: Opcode - * 2. [23:16]: Port - * 3. [15:8]: Register Offset - * 4. [7:4]: Byte Enables (use 0xF to set all of these bits - * to 1) - * 5. [3:0]: reserved - * - * Read (0xD0) and write (0xE0) opcodes are written to the - * control register when reading and writing to Lincroft - * registers, respectively. - * - * We're interested in registers found in the Lincroft - * B-unit. The B-unit port is 0x3. - * - * The six B-unit RAR register offsets we use are listed - * earlier in this file. - * - * Lastly writing to the MCR register requires the "Byte - * enables" bits to be set to 1. This may be achieved by - * writing 0xF at bit 4. - * - * The MDR (message data register) format is the following: - * 1. [31:0]: Read/Write Data - * - * Data being read from this register is only available after - * writing the appropriate control message to the MCR - * register. - * - * Data being written to this register must be written before - * writing the appropriate control message to the MCR - * register. - */ - - int result; - u32 addr32; - - /* Construct control message */ - u32 const message = - (LNC_MESSAGE_READ_OPCODE << 24) - | (LNC_BUNIT_PORT << 16) - | (offset << 8) - | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4); - - dev_dbg(&pdev->dev, "Offset for 'get' LNC MSG is %x\n", offset); - - /* - * We synchronize access to the Lincroft MCR and MDR registers - * until BOTH the command is issued through the MCR register - * and the corresponding data is read from the MDR register. - * Otherwise a race condition would exist between accesses to - * both registers. - */ - - mutex_lock(&lnc_reg_mutex); - - /* Send the control message */ - result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message); - if (!result) { - /* Read back the address as a 32bit value */ - result = pci_read_config_dword(pdev, LNC_MDR_OFFSET, &addr32); - *addr = (dma_addr_t)addr32; - } - mutex_unlock(&lnc_reg_mutex); - return result; -} - -/** - * rar_set_addr - Set a RAR mapping - * @pdev: PCI device for the RAR - * @offset: offset for message - * @addr: address to set - * - * Sets the address of a given RAR register. Returns 0 on success - * or an error code on failure. - */ -static int rar_set_addr(struct pci_dev *pdev, - int offset, - dma_addr_t addr) -{ - /* - * Data being written to this register must be written before - * writing the appropriate control message to the MCR - * register. - * See rar_get_addrs() for a description of the - * message bus interface being used here. - */ - - int result; - - /* Construct control message */ - u32 const message = (LNC_MESSAGE_WRITE_OPCODE << 24) - | (LNC_BUNIT_PORT << 16) - | (offset << 8) - | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4); - - /* - * We synchronize access to the Lincroft MCR and MDR registers - * until BOTH the command is issued through the MCR register - * and the corresponding data is read from the MDR register. - * Otherwise a race condition would exist between accesses to - * both registers. - */ - - mutex_lock(&lnc_reg_mutex); - - /* Send the control message */ - result = pci_write_config_dword(pdev, LNC_MDR_OFFSET, addr); - if (!result) - /* And address */ - result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message); - - mutex_unlock(&lnc_reg_mutex); - return result; -} - -/* - * rar_init_params - Initialize RAR parameters - * @rar: RAR device to initialise - * - * Initialize RAR parameters, such as bus addresses, etc. Returns 0 - * on success, or an error code on failure. - */ -static int init_rar_params(struct rar_device *rar) -{ - struct pci_dev *pdev = rar->rar_dev; - unsigned int i; - int result = 0; - int offset = 0x10; /* RAR 0 to 2 in order low/high/low/high/... */ - - /* Retrieve RAR start and end bus addresses. - * Access the RAR registers through the Lincroft Message Bus - * Interface on PCI device: 00:00.0 Host bridge. - */ - - for (i = 0; i < MRST_NUM_RAR; ++i) { - struct rar_addr *addr = &rar->rar_addr[i]; - - result = rar_read_addr(pdev, offset++, &addr->low); - if (result != 0) - return result; - - result = rar_read_addr(pdev, offset++, &addr->high); - if (result != 0) - return result; - - - /* - * Only the upper 22 bits of the RAR addresses are - * stored in their corresponding RAR registers so we - * must set the lower 10 bits accordingly. - - * The low address has its lower 10 bits cleared, and - * the high address has all its lower 10 bits set, - * e.g.: - * low = 0x2ffffc00 - */ - - addr->low &= (dma_addr_t)0xfffffc00u; - - /* - * Set bits 9:0 on uppser address if bits 31:10 are non - * zero; otherwize clear all bits - */ - - if ((addr->high & 0xfffffc00u) == 0) - addr->high = 0; - else - addr->high |= 0x3ffu; - } - /* Done accessing the device. */ - - if (result == 0) { - for (i = 0; i != MRST_NUM_RAR; ++i) { - /* - * "BRAR" refers to the RAR registers in the - * Lincroft B-unit. - */ - dev_info(&pdev->dev, "BRAR[%u] bus address range = " - "[%lx, %lx]\n", i, - (unsigned long)rar->rar_addr[i].low, - (unsigned long)rar->rar_addr[i].high); - } - } - return result; -} - -/** - * rar_get_address - get the bus address in a RAR - * @start: return value of start address of block - * @end: return value of end address of block - * - * The rar_get_address function is used by other device drivers - * to obtain RAR address information on a RAR. It takes three - * parameters: - * - * The function returns a 0 upon success or an error if there is no RAR - * facility on this system. - */ -int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end) -{ - int idx; - struct rar_device *rar = rar_to_device(rar_index, &idx); - - if (rar == NULL) { - WARN_ON(1); - return -ENODEV; - } - - *start = rar->rar_addr[idx].low; - *end = rar->rar_addr[idx].high; - return 0; -} -EXPORT_SYMBOL(rar_get_address); - -/** - * rar_lock - lock a RAR register - * @rar_index: RAR to lock (0-2) - * - * The rar_lock function is ued by other device drivers to lock an RAR. - * once a RAR is locked, it stays locked until the next system reboot. - * - * The function returns a 0 upon success or an error if there is no RAR - * facility on this system, or the locking fails - */ -int rar_lock(int rar_index) -{ - struct rar_device *rar; - int result; - int idx; - dma_addr_t low, high; - - rar = rar_to_device(rar_index, &idx); - - if (rar == NULL) { - WARN_ON(1); - return -EINVAL; - } - - low = rar->rar_addr[idx].low & 0xfffffc00u; - high = rar->rar_addr[idx].high & 0xfffffc00u; - - /* - * Only allow I/O from the graphics and Langwell; - * not from the x86 processor - */ - - if (rar_index == RAR_TYPE_VIDEO) { - low |= 0x00000009; - high |= 0x00000015; - } else if (rar_index == RAR_TYPE_AUDIO) { - /* Only allow I/O from Langwell; nothing from x86 */ - low |= 0x00000008; - high |= 0x00000018; - } else - /* Read-only from all agents */ - high |= 0x00000018; - - /* - * Now program the register using the Lincroft message - * bus interface. - */ - result = rar_set_addr(rar->rar_dev, - 2 * idx, low); - - if (result == 0) - result = rar_set_addr(rar->rar_dev, - 2 * idx + 1, high); - - return result; -} -EXPORT_SYMBOL(rar_lock); - -/** - * register_rar - register a RAR handler - * @num: RAR we wish to register for - * @callback: function to call when RAR support is available - * @data: data to pass to this function - * - * The register_rar function is to used by other device drivers - * to ensure that this driver is ready. As we cannot be sure of - * the compile/execute order of drivers in the kernel, it is - * best to give this driver a callback function to call when - * it is ready to give out addresses. The callback function - * would have those steps that continue the initialization of - * a driver that do require a valid RAR address. One of those - * steps would be to call rar_get_address() - * - * This function return 0 on success or an error code on failure. - */ -int register_rar(int num, int (*callback)(unsigned long data), - unsigned long data) -{ - /* For now we hardcode a single RAR device */ - struct rar_device *rar; - struct client *c; - int idx; - int retval = 0; - - mutex_lock(&rar_mutex); - - /* Do we have a client mapping for this RAR number ? */ - c = rar_to_client(num); - if (c == NULL) { - retval = -ERANGE; - goto done; - } - /* Is it claimed ? */ - if (c->busy) { - retval = -EBUSY; - goto done; - } - c->busy = 1; - - /* See if we have a handler for this RAR yet, if we do then fire it */ - rar = rar_to_device(num, &idx); - - if (rar) { - /* - * if the driver already registered, then we can simply - * call the callback right now - */ - (*callback)(data); - goto done; - } - - /* Arrange to be called back when the hardware is found */ - c->callback = callback; - c->driver_priv = data; -done: - mutex_unlock(&rar_mutex); - return retval; -} -EXPORT_SYMBOL(register_rar); - -/** - * unregister_rar - release a RAR allocation - * @num: RAR number - * - * Releases a RAR allocation, or pending allocation. If a callback is - * pending then this function will either complete before the unregister - * returns or not at all. - */ - -void unregister_rar(int num) -{ - struct client *c; - - mutex_lock(&rar_mutex); - c = rar_to_client(num); - if (c == NULL || !c->busy) - WARN_ON(1); - else - c->busy = 0; - mutex_unlock(&rar_mutex); -} -EXPORT_SYMBOL(unregister_rar); - -/** - * rar_callback - Process callbacks - * @rar: new RAR device - * - * Process the callbacks for a newly found RAR device. - */ - -static void rar_callback(struct rar_device *rar) -{ - struct client *c = &rar->client[0]; - int i; - - mutex_lock(&rar_mutex); - - rar->registered = 1; /* Ensure no more callbacks queue */ - - for (i = 0; i < MRST_NUM_RAR; i++) { - if (c->callback && c->busy) { - c->callback(c->driver_priv); - c->callback = NULL; - } - c++; - } - mutex_unlock(&rar_mutex); -} - -/** - * rar_probe - PCI probe callback - * @dev: PCI device - * @id: matching entry in the match table - * - * A RAR device has been discovered. Initialise it and if successful - * process any pending callbacks that can now be completed. - */ -static int rar_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int error; - struct rar_device *rar; - - dev_dbg(&dev->dev, "PCI probe starting\n"); - - rar = alloc_rar_device(); - if (rar == NULL) - return -EBUSY; - - /* Enable the device */ - error = pci_enable_device(dev); - if (error) { - dev_err(&dev->dev, - "Error enabling RAR register PCI device\n"); - goto end_function; - } - - /* Fill in the rar_device structure */ - rar->rar_dev = pci_dev_get(dev); - pci_set_drvdata(dev, rar); - - /* - * Initialize the RAR parameters, which have to be retrieved - * via the message bus interface. - */ - error = init_rar_params(rar); - if (error) { - pci_disable_device(dev); - dev_err(&dev->dev, "Error retrieving RAR addresses\n"); - goto end_function; - } - /* now call anyone who has registered (using callbacks) */ - rar_callback(rar); - return 0; -end_function: - free_rar_device(rar); - return error; -} - -static DEFINE_PCI_DEVICE_TABLE(rar_pci_id_tbl) = { - { PCI_VDEVICE(INTEL, 0x4110) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl); - -/* field for registering driver to PCI device */ -static struct pci_driver rar_pci_driver = { - .name = "rar_register_driver", - .id_table = rar_pci_id_tbl, - .probe = rar_probe, - /* Cannot be unplugged - no remove */ -}; - -static int __init rar_init_handler(void) -{ - return pci_register_driver(&rar_pci_driver); -} - -static void __exit rar_exit_handler(void) -{ - pci_unregister_driver(&rar_pci_driver); -} - -module_init(rar_init_handler); -module_exit(rar_exit_handler); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Intel Restricted Access Region Register Driver"); diff --git a/include/linux/rar_register.h b/include/linux/rar_register.h deleted file mode 100644 index 5c611818936..00000000000 --- a/include/linux/rar_register.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2010 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of version 2 of the GNU General - * Public License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 02111-1307, USA. - * The full GNU General Public License is included in this - * distribution in the file called COPYING. - */ - - -#ifndef _RAR_REGISTER_H -#define _RAR_REGISTER_H - -#include - -/* following are used both in drivers as well as user space apps */ - -#define RAR_TYPE_VIDEO 0 -#define RAR_TYPE_AUDIO 1 -#define RAR_TYPE_IMAGE 2 -#define RAR_TYPE_DATA 3 - -#ifdef __KERNEL__ - -struct rar_device; - -#if defined(CONFIG_RAR_REGISTER) -int register_rar(int num, - int (*callback)(unsigned long data), unsigned long data); -void unregister_rar(int num); -int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end); -int rar_lock(int rar_index); -#else -extern void unregister_rar(int num) { } -extern int rar_lock(int rar_index) { return -EIO; } - -extern inline int register_rar(int num, - int (*callback)(unsigned long data), unsigned long data) -{ - return -ENODEV; -} - -extern int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end) -{ - return -ENODEV; -} -#endif /* RAR_REGISTER */ - -#endif /* __KERNEL__ */ -#endif /* _RAR_REGISTER_H */ -- cgit v1.2.3-70-g09d2 From 3e2abc5a35d25442821e1733687b7abbc83b5072 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 18 Jan 2012 13:44:08 -0600 Subject: ACPI: EC: Add ec_get_handle() toshiba_acpi needs to execute an AML method within the EC namespace to make hotkeys work on some platforms. Provide an interface to allow it to easily get a handle to the EC namespace for this purpose. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/acpi/ec.c | 10 ++++++++++ include/linux/acpi.h | 1 + 2 files changed, 11 insertions(+) (limited to 'include/linux') diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b19a18dd994..e37615f310d 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -445,6 +445,16 @@ int ec_transaction(u8 command, EXPORT_SYMBOL(ec_transaction); +/* Get the handle to the EC device */ +acpi_handle ec_get_handle(void) +{ + if (!first_ec) + return NULL; + return first_ec->handle; +} + +EXPORT_SYMBOL(ec_get_handle); + void acpi_ec_block_transactions(void) { struct acpi_ec *ec = first_ec; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 3f968665899..f53fea61f40 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -151,6 +151,7 @@ extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, const u8 *wdata, unsigned wdata_len, u8 *rdata, unsigned rdata_len); +extern acpi_handle ec_get_handle(void); #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) -- cgit v1.2.3-70-g09d2 From 93d68e52295fb8b65ded6db49e32e63b6a203e0b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 20 Mar 2012 12:28:29 -0400 Subject: tracing: Move the tracing_on/off() declarations into CONFIG_TRACING The tracing_on/off() declarations were under CONFIG_RING_BUFFER, but the functions are now only defined under CONFIG_TRACING as they are specific to ftrace and not the ring buffer. But the declarations were still defined under the ring buffer and this caused the build to fail when CONFIG_RING_BUFFER was set but CONFIG_TRACING was not. Reported-by: Ingo Molnar Signed-off-by: Steven Rostedt --- include/linux/kernel.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e8343422240..51b9548fd12 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -414,16 +414,10 @@ extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); * Most likely, you want to use tracing_on/tracing_off. */ #ifdef CONFIG_RING_BUFFER -void tracing_on(void); -void tracing_off(void); /* trace_off_permanent stops recording with no way to bring it back */ void tracing_off_permanent(void); -int tracing_is_on(void); #else -static inline void tracing_on(void) { } -static inline void tracing_off(void) { } static inline void tracing_off_permanent(void) { } -static inline int tracing_is_on(void) { return 0; } #endif enum ftrace_dump_mode { @@ -433,6 +427,10 @@ enum ftrace_dump_mode { }; #ifdef CONFIG_TRACING +void tracing_on(void); +void tracing_off(void); +int tracing_is_on(void); + extern void tracing_start(void); extern void tracing_stop(void); extern void ftrace_off_permanent(void); @@ -517,6 +515,11 @@ static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void ftrace_off_permanent(void) { } static inline void trace_dump_stack(void) { } + +static inline void tracing_on(void) { } +static inline void tracing_off(void) { } +static inline int tracing_is_on(void) { return 0; } + static inline int trace_printk(const char *fmt, ...) { -- cgit v1.2.3-70-g09d2 From e1689795a784a7c41ac4cf9032794986b095a133 Mon Sep 17 00:00:00 2001 From: Robert Lee Date: Tue, 20 Mar 2012 15:22:42 -0500 Subject: cpuidle: Add common time keeping and irq enabling Make necessary changes to implement time keeping and irq enabling in the core cpuidle code. This will allow the removal of these functionalities from various platform cpuidle implementations whose timekeeping and irq enabling follows the form in this common code. Signed-off-by: Robert Lee Tested-by: Jean Pihet Tested-by: Amit Daniel Tested-by: Robert Lee Reviewed-by: Kevin Hilman Reviewed-by: Daniel Lezcano Reviewed-by: Deepthi Dharwar Acked-by: Jean Pihet Signed-off-by: Len Brown --- arch/arm/include/asm/cpuidle.h | 29 +++++++++++++++++++ arch/arm/kernel/Makefile | 2 +- arch/arm/kernel/cpuidle.c | 21 ++++++++++++++ drivers/cpuidle/cpuidle.c | 66 +++++++++++++++++++++++++++++++++++++----- include/linux/cpuidle.h | 13 ++++++++- 5 files changed, 122 insertions(+), 9 deletions(-) create mode 100644 arch/arm/include/asm/cpuidle.h create mode 100644 arch/arm/kernel/cpuidle.c (limited to 'include/linux') diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h new file mode 100644 index 00000000000..2fca60ab513 --- /dev/null +++ b/arch/arm/include/asm/cpuidle.h @@ -0,0 +1,29 @@ +#ifndef __ASM_ARM_CPUIDLE_H +#define __ASM_ARM_CPUIDLE_H + +#ifdef CONFIG_CPU_IDLE +extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); +#else +static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { return -ENODEV; } +#endif + +/* Common ARM WFI state */ +#define ARM_CPUIDLE_WFI_STATE_PWR(p) {\ + .enter = arm_cpuidle_simple_enter,\ + .exit_latency = 1,\ + .target_residency = 1,\ + .power_usage = p,\ + .flags = CPUIDLE_FLAG_TIME_VALID,\ + .name = "WFI",\ + .desc = "ARM WFI",\ +} + +/* + * in case power_specified == 1, give a default WFI power value needed + * by some governors + */ +#define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) + +#endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 43b740d0e37..940c27fde49 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o - +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c new file mode 100644 index 00000000000..89545f6c840 --- /dev/null +++ b/arch/arm/kernel/cpuidle.c @@ -0,0 +1,21 @@ +/* + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include + +int arm_cpuidle_simple_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + cpu_do_idle(); + + return index; +} diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 59f4261c753..4869b550023 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -53,6 +53,24 @@ static void cpuidle_kick_cpus(void) {} static int __cpuidle_register_device(struct cpuidle_device *dev); +static inline int cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + struct cpuidle_state *target_state = &drv->states[index]; + return target_state->enter(dev, drv, index); +} + +static inline int cpuidle_enter_tk(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + return cpuidle_wrap_enter(dev, drv, index, cpuidle_enter); +} + +typedef int (*cpuidle_enter_t)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); + +static cpuidle_enter_t cpuidle_enter_ops; + /** * cpuidle_idle_call - the main idle loop * @@ -63,7 +81,6 @@ int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_driver *drv = cpuidle_get_driver(); - struct cpuidle_state *target_state; int next_state, entered_state; if (off) @@ -92,12 +109,10 @@ int cpuidle_idle_call(void) return 0; } - target_state = &drv->states[next_state]; - trace_power_start(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle(next_state, dev->cpu); - entered_state = target_state->enter(dev, drv, next_state); + entered_state = cpuidle_enter_ops(dev, drv, next_state); trace_power_end(dev->cpu); trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu); @@ -110,6 +125,8 @@ int cpuidle_idle_call(void) dev->states_usage[entered_state].time += (unsigned long long)dev->last_residency; dev->states_usage[entered_state].usage++; + } else { + dev->last_residency = 0; } /* give the governor an opportunity to reflect on the outcome */ @@ -164,6 +181,37 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); +/** + * cpuidle_wrap_enter - performs timekeeping and irqen around enter function + * @dev: pointer to a valid cpuidle_device object + * @drv: pointer to a valid cpuidle_driver object + * @index: index of the target cpuidle state. + */ +int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ + ktime_t time_start, time_end; + s64 diff; + + time_start = ktime_get(); + + index = enter(dev, drv, index); + + time_end = ktime_get(); + + local_irq_enable(); + + diff = ktime_to_us(ktime_sub(time_end, time_start)); + if (diff > INT_MAX) + diff = INT_MAX; + + dev->last_residency = (int) diff; + + return index; +} + #ifdef CONFIG_ARCH_HAS_CPU_RELAX static int poll_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -212,10 +260,11 @@ static void poll_idle_init(struct cpuidle_driver *drv) {} int cpuidle_enable_device(struct cpuidle_device *dev) { int ret, i; + struct cpuidle_driver *drv = cpuidle_get_driver(); if (dev->enabled) return 0; - if (!cpuidle_get_driver() || !cpuidle_curr_governor) + if (!drv || !cpuidle_curr_governor) return -EIO; if (!dev->state_count) return -EINVAL; @@ -226,13 +275,16 @@ int cpuidle_enable_device(struct cpuidle_device *dev) return ret; } - poll_idle_init(cpuidle_get_driver()); + cpuidle_enter_ops = drv->en_core_tk_irqen ? + cpuidle_enter_tk : cpuidle_enter; + + poll_idle_init(drv); if ((ret = cpuidle_add_state_sysfs(dev))) return ret; if (cpuidle_curr_governor->enable && - (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev))) + (ret = cpuidle_curr_governor->enable(drv, dev))) goto fail_sysfs; for (i = 0; i < dev->state_count; i++) { diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 712abcc205a..927db28a2a4 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -15,6 +15,7 @@ #include #include #include +#include #define CPUIDLE_STATE_MAX 8 #define CPUIDLE_NAME_LEN 16 @@ -122,6 +123,8 @@ struct cpuidle_driver { struct module *owner; unsigned int power_specified:1; + /* set to 1 to use the core cpuidle time keeping (for all states). */ + unsigned int en_core_tk_irqen:1; struct cpuidle_state states[CPUIDLE_STATE_MAX]; int state_count; int safe_state_index; @@ -140,7 +143,10 @@ extern void cpuidle_pause_and_lock(void); extern void cpuidle_resume_and_unlock(void); extern int cpuidle_enable_device(struct cpuidle_device *dev); extern void cpuidle_disable_device(struct cpuidle_device *dev); - +extern int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)); #else static inline void disable_cpuidle(void) { } static inline int cpuidle_idle_call(void) { return -ENODEV; } @@ -157,6 +163,11 @@ static inline void cpuidle_resume_and_unlock(void) { } static inline int cpuidle_enable_device(struct cpuidle_device *dev) {return -ENODEV; } static inline void cpuidle_disable_device(struct cpuidle_device *dev) { } +static inline int cpuidle_wrap_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index, + int (*enter)(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index)) +{ return -ENODEV; } #endif -- cgit v1.2.3-70-g09d2 From 16052827d98fbc13c31ebad560af4bd53e2b4dd5 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Mar 2012 16:11:18 -0500 Subject: dmaengine/dma_slave: introduce inline wrappers Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine Signed-off-by: Vinod Koul --- arch/arm/plat-nomadik/include/plat/ste_dma40.h | 3 +-- arch/arm/plat-samsung/dma-ops.c | 4 ++-- drivers/media/video/mx3_camera.c | 2 +- drivers/media/video/timblogiw.c | 2 +- drivers/mmc/host/atmel-mci.c | 2 +- drivers/mmc/host/mmci.c | 2 +- drivers/mmc/host/mxcmmc.c | 2 +- drivers/mmc/host/mxs-mmc.c | 2 +- drivers/mmc/host/sh_mmcif.c | 4 ++-- drivers/mmc/host/tmio_mmc_dma.c | 4 ++-- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 25 +++++++++++-------------- drivers/net/ethernet/micrel/ks8842.c | 4 ++-- drivers/spi/spi-dw-mid.c | 4 ++-- drivers/spi/spi-ep93xx.c | 4 ++-- drivers/spi/spi-pl022.c | 4 ++-- drivers/spi/spi-topcliff-pch.c | 4 ++-- drivers/tty/serial/amba-pl011.c | 6 ++---- drivers/tty/serial/pch_uart.c | 4 ++-- drivers/tty/serial/sh-sci.c | 4 ++-- drivers/usb/musb/ux500_dma.c | 3 +-- drivers/usb/renesas_usbhs/fifo.c | 5 ++--- drivers/video/mx3fb.c | 4 ++-- include/linux/dmaengine.h | 16 ++++++++++++++++ sound/soc/ep93xx/ep93xx-pcm.c | 3 +-- sound/soc/imx/imx-pcm-dma-mx2.c | 2 +- sound/soc/mxs/mxs-pcm.c | 2 +- sound/soc/sh/siu_pcm.c | 4 ++-- sound/soc/txx9/txx9aclc.c | 2 +- 28 files changed, 67 insertions(+), 60 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index fd0ee84c45d..9ff93b06568 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -200,8 +200,7 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, sg.dma_address = addr; sg.length = size; - return chan->device->device_prep_slave_sg(chan, &sg, 1, - direction, flags); + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); } #else diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 0747c77a2fd..a6ef3961134 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -79,11 +79,11 @@ static int samsung_dmadev_prepare(unsigned ch, info->len, offset_in_page(info->buf)); sg_dma_address(&sg) = info->buf; - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, &sg, 1, info->direction, DMA_PREP_INTERRUPT); break; case DMA_CYCLIC: - desc = chan->device->device_prep_dma_cyclic(chan, + desc = dmaengine_prep_dma_cyclic(chan, info->buf, info->len, info->period, info->direction); break; default: diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index 74522773e93..93c35ef5f0a 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -286,7 +286,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0); sg_dma_len(sg) = new_size; - txd = ichan->dma_chan.device->device_prep_slave_sg( + txd = dmaengine_prep_slave_sg( &ichan->dma_chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (!txd) diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c index 4ed1c7c28ae..02194c056b0 100644 --- a/drivers/media/video/timblogiw.c +++ b/drivers/media/video/timblogiw.c @@ -564,7 +564,7 @@ static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) spin_unlock_irq(&fh->queue_lock); - desc = fh->chan->device->device_prep_slave_sg(fh->chan, + desc = dmaengine_prep_slave_sg(fh->chan, buf->sg, sg_elems, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP); if (!desc) { diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 3ba865ddebc..492854b09d8 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -875,7 +875,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) data->sg_len, direction); dmaengine_slave_config(chan, &host->dma_conf); - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, data->sg, sglen, slave_dirn, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index a09c06ba046..c55f9663eb1 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -413,7 +413,7 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data, return -EINVAL; dmaengine_slave_config(chan, &conf); - desc = device->device_prep_slave_sg(chan, data->sg, nr_sg, + desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg, conf.direction, DMA_CTRL_ACK); if (!desc) goto unmap_exit; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 68b69a91e5e..b2058b43232 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -255,7 +255,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) if (nents != data->sg_len) return -EINVAL; - host->desc = host->dma->device->device_prep_slave_sg(host->dma, + host->desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len, slave_dirn, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 382c835d217..65f36cf2ff3 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -324,7 +324,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma( sg_len = SSP_PIO_NUM; } - desc = host->dmach->device->device_prep_slave_sg(host->dmach, + desc = dmaengine_prep_slave_sg(host->dmach, sgl, sg_len, host->slave_dirn, append); if (desc) { desc->callback = mxs_mmc_dma_irq_callback; diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index f5d8b53be33..3d00f1aab87 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -285,7 +285,7 @@ static void sh_mmcif_start_dma_rx(struct sh_mmcif_host *host) DMA_FROM_DEVICE); if (ret > 0) { host->dma_active = true; - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } @@ -334,7 +334,7 @@ static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host) DMA_TO_DEVICE); if (ret > 0) { host->dma_active = true; - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index 7a6e6cc8f8b..def9c54f73f 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -76,7 +76,7 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE); if (ret > 0) - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_DEV_TO_MEM, DMA_CTRL_ACK); if (desc) { @@ -157,7 +157,7 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE); if (ret > 0) - desc = chan->device->device_prep_slave_sg(chan, sg, ret, + desc = dmaengine_prep_slave_sg(chan, sg, ret, DMA_MEM_TO_DEV, DMA_CTRL_ACK); if (desc) { diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 7f680420bfa..2a200ba0bd1 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -825,7 +825,7 @@ int gpmi_send_command(struct gpmi_nand_data *this) | BM_GPMI_CTRL0_ADDRESS_INCREMENT | BF_GPMI_CTRL0_XFER_COUNT(this->command_length); pio[1] = pio[2] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { @@ -838,8 +838,7 @@ int gpmi_send_command(struct gpmi_nand_data *this) sg_init_one(sgl, this->cmd_buffer, this->command_length); dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE); - desc = channel->device->device_prep_slave_sg(channel, - sgl, 1, DMA_MEM_TO_DEV, 1); + desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, 1); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -870,8 +869,7 @@ int gpmi_send_data(struct gpmi_nand_data *this) | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, - (struct scatterlist *)pio, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { pr_err("step 1 error\n"); @@ -880,7 +878,7 @@ int gpmi_send_data(struct gpmi_nand_data *this) /* [2] send DMA request */ prepare_data_dma(this, DMA_TO_DEVICE); - desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl, + desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, 1, DMA_MEM_TO_DEV, 1); if (!desc) { pr_err("step 2 error\n"); @@ -906,7 +904,7 @@ int gpmi_read_data(struct gpmi_nand_data *this) | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA) | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { @@ -916,8 +914,8 @@ int gpmi_read_data(struct gpmi_nand_data *this) /* [2] : send DMA request */ prepare_data_dma(this, DMA_FROM_DEVICE); - desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl, - 1, DMA_DEV_TO_MEM, 1); + desc = dmaengine_prep_slave_sg(channel, &this->data_sgl, + 1, DMA_DEV_TO_MEM, 1); if (!desc) { pr_err("step 2 error\n"); return -1; @@ -962,8 +960,7 @@ int gpmi_send_page(struct gpmi_nand_data *this, pio[4] = payload; pio[5] = auxiliary; - desc = channel->device->device_prep_slave_sg(channel, - (struct scatterlist *)pio, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 0); if (!desc) { pr_err("step 2 error\n"); @@ -997,7 +994,7 @@ int gpmi_read_page(struct gpmi_nand_data *this, | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(0); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, 2, DMA_TRANS_NONE, 0); if (!desc) { @@ -1026,7 +1023,7 @@ int gpmi_read_page(struct gpmi_nand_data *this, pio[3] = geo->page_size; pio[4] = payload; pio[5] = auxiliary; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, ARRAY_SIZE(pio), DMA_TRANS_NONE, 1); if (!desc) { @@ -1045,7 +1042,7 @@ int gpmi_read_page(struct gpmi_nand_data *this, | BF_GPMI_CTRL0_ADDRESS(address) | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size); pio[1] = 0; - desc = channel->device->device_prep_slave_sg(channel, + desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio, 2, DMA_TRANS_NONE, 1); if (!desc) { diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c index 0a85690a132..554fef3f013 100644 --- a/drivers/net/ethernet/micrel/ks8842.c +++ b/drivers/net/ethernet/micrel/ks8842.c @@ -458,7 +458,7 @@ static int ks8842_tx_frame_dma(struct sk_buff *skb, struct net_device *netdev) if (sg_dma_len(&ctl->sg) % 4) sg_dma_len(&ctl->sg) += 4 - sg_dma_len(&ctl->sg) % 4; - ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan, + ctl->adesc = dmaengine_prep_slave_sg(ctl->chan, &ctl->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP); if (!ctl->adesc) @@ -570,7 +570,7 @@ static int __ks8842_start_new_rx_dma(struct net_device *netdev) sg_dma_len(sg) = DMA_BUFFER_SIZE; - ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan, + ctl->adesc = dmaengine_prep_slave_sg(ctl->chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP); diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index 04d6c1b3138..b9f0192758d 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -146,7 +146,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) dws->tx_sgl.dma_address = dws->tx_dma; dws->tx_sgl.length = dws->len; - txdesc = txchan->device->device_prep_slave_sg(txchan, + txdesc = dmaengine_prep_slave_sg(txchan, &dws->tx_sgl, 1, DMA_MEM_TO_DEV, @@ -169,7 +169,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) dws->rx_sgl.dma_address = dws->rx_dma; dws->rx_sgl.length = dws->len; - rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + rxdesc = dmaengine_prep_slave_sg(rxchan, &dws->rx_sgl, 1, DMA_DEV_TO_MEM, diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index d46e55c720b..6db2887852d 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -633,8 +633,8 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) if (!nents) return ERR_PTR(-ENOMEM); - txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents, - slave_dirn, DMA_CTRL_ACK); + txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, + slave_dirn, DMA_CTRL_ACK); if (!txd) { dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); return ERR_PTR(-ENOMEM); diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1dc667f8a30..a209f3b7b05 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1040,7 +1040,7 @@ static int configure_dma(struct pl022 *pl022) goto err_tx_sgmap; /* Send both scatterlists */ - rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + rxdesc = dmaengine_prep_slave_sg(rxchan, pl022->sgt_rx.sgl, rx_sglen, DMA_DEV_TO_MEM, @@ -1048,7 +1048,7 @@ static int configure_dma(struct pl022 *pl022) if (!rxdesc) goto err_rxdesc; - txdesc = txchan->device->device_prep_slave_sg(txchan, + txdesc = dmaengine_prep_slave_sg(txchan, pl022->sgt_tx.sgl, tx_sglen, DMA_MEM_TO_DEV, diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 2a6429d8c36..ea4c8d57667 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -1078,7 +1078,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) sg_dma_address(sg) = dma->rx_buf_dma + sg->offset; } sg = dma->sg_rx_p; - desc_rx = dma->chan_rx->device->device_prep_slave_sg(dma->chan_rx, sg, + desc_rx = dmaengine_prep_slave_sg(dma->chan_rx, sg, num, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_rx) { @@ -1123,7 +1123,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) sg_dma_address(sg) = dma->tx_buf_dma + sg->offset; } sg = dma->sg_tx_p; - desc_tx = dma->chan_tx->device->device_prep_slave_sg(dma->chan_tx, + desc_tx = dmaengine_prep_slave_sg(dma->chan_tx, sg, num, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_tx) { diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index db7f88a1bde..f9dcb5379b9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -483,7 +483,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) return -EBUSY; } - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, + desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); @@ -666,7 +666,6 @@ static void pl011_dma_rx_callback(void *data); static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) { struct dma_chan *rxchan = uap->dmarx.chan; - struct dma_device *dma_dev; struct pl011_dmarx_data *dmarx = &uap->dmarx; struct dma_async_tx_descriptor *desc; struct pl011_sgbuf *sgbuf; @@ -677,8 +676,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) /* Start the RX DMA job */ sgbuf = uap->dmarx.use_buf_b ? &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; - dma_dev = rxchan->device; - desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1, + desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 17ae65762d1..61743bdc439 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -763,7 +763,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_address(sg) = priv->rx_buf_dma; - desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, + desc = dmaengine_prep_slave_sg(priv->chan_rx, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); @@ -922,7 +922,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) sg_dma_len(sg) = size; } - desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, + desc = dmaengine_prep_slave_sg(priv->chan_tx, priv->sg_tx_p, nent, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 75085795528..872557f89cc 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1338,7 +1338,7 @@ static void sci_submit_rx(struct sci_port *s) struct scatterlist *sg = &s->sg_rx[i]; struct dma_async_tx_descriptor *desc; - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (desc) { @@ -1453,7 +1453,7 @@ static void work_fn_tx(struct work_struct *work) BUG_ON(!sg_dma_len(sg)); - desc = chan->device->device_prep_slave_sg(chan, + desc = dmaengine_prep_slave_sg(chan, sg, s->sg_len_tx, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 2a36bf37d7a..d05c7fbbb70 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -120,8 +120,7 @@ static bool ux500_configure_channel(struct dma_channel *channel, dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf); - dma_desc = dma_chan->device-> - device_prep_slave_sg(dma_chan, &sg, 1, direction, + dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!dma_desc) return false; diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 72339bd6fca..7b4309339f3 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -783,9 +783,8 @@ static void usbhsf_dma_prepare_tasklet(unsigned long data) sg_dma_address(&sg) = pkt->dma + pkt->actual; sg_dma_len(&sg) = pkt->trans; - desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir, - DMA_PREP_INTERRUPT | - DMA_CTRL_ACK); + desc = dmaengine_prep_slave_sg(chan, &sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) return; diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 727a5149d81..eec0d7b748e 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -337,7 +337,7 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) /* This enables the channel */ if (mx3_fbi->cookie < 0) { - mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, + mx3_fbi->txd = dmaengine_prep_slave_sg(dma_chan, &mx3_fbi->sg[0], 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!mx3_fbi->txd) { dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", @@ -1091,7 +1091,7 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var, if (mx3_fbi->txd) async_tx_ack(mx3_fbi->txd); - txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + + txd = dmaengine_prep_slave_sg(dma_chan, sg + mx3_fbi->cur_ipu_buf, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!txd) { dev_err(fbi->device, diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 715babf4bff..03d68b7e570 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -622,6 +622,22 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); } +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction dir, unsigned long flags) +{ + return chan->device->device_prep_slave_sg(chan, sgl, sg_len, + dir, flags); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction dir) +{ + return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len, + period_len, dir); +} + static inline int dmaengine_terminate_all(struct dma_chan *chan) { return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c index de839044987..50593e50ad5 100644 --- a/sound/soc/ep93xx/ep93xx-pcm.c +++ b/sound/soc/ep93xx/ep93xx-pcm.c @@ -142,11 +142,10 @@ static int ep93xx_pcm_dma_submit(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct ep93xx_runtime_data *rtd = runtime->private_data; struct dma_chan *chan = rtd->dma_chan; - struct dma_device *dma_dev = chan->device; struct dma_async_tx_descriptor *desc; rtd->pointer_bytes = 0; - desc = dma_dev->device_prep_dma_cyclic(chan, runtime->dma_addr, + desc = dmaengine_prep_dma_cyclic(chan, runtime->dma_addr, rtd->period_bytes * rtd->periods, rtd->period_bytes, rtd->dma_data.direction); diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index 52b0dedbf99..af46b4e2b43 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -160,7 +160,7 @@ static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream, iprtd->buf = (unsigned int *)substream->dma_buffer.area; - iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr, + iprtd->desc = dmaengine_prep_dma_cyclic(chan, dma_addr, iprtd->period_bytes * iprtd->periods, iprtd->period_bytes, substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index 105f42a394d..661b678d08a 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -132,7 +132,7 @@ static int snd_mxs_pcm_hw_params(struct snd_pcm_substream *substream, iprtd->buf = substream->dma_buffer.area; - iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr, + iprtd->desc = dmaengine_prep_dma_cyclic(chan, dma_addr, iprtd->period_bytes * iprtd->periods, iprtd->period_bytes, substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c index 0193e595d41..5cfcc655e95 100644 --- a/sound/soc/sh/siu_pcm.c +++ b/sound/soc/sh/siu_pcm.c @@ -130,7 +130,7 @@ static int siu_pcm_wr_set(struct siu_port *port_info, sg_dma_len(&sg) = size; sg_dma_address(&sg) = buff; - desc = siu_stream->chan->device->device_prep_slave_sg(siu_stream->chan, + desc = dmaengine_prep_slave_sg(siu_stream->chan, &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dev_err(dev, "Failed to allocate a dma descriptor\n"); @@ -180,7 +180,7 @@ static int siu_pcm_rd_set(struct siu_port *port_info, sg_dma_len(&sg) = size; sg_dma_address(&sg) = buff; - desc = siu_stream->chan->device->device_prep_slave_sg(siu_stream->chan, + desc = dmaengine_prep_slave_sg(siu_stream->chan, &sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dev_err(dev, "Failed to allocate dma descriptor\n"); diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c index 21554611557..b609d2c64c5 100644 --- a/sound/soc/txx9/txx9aclc.c +++ b/sound/soc/txx9/txx9aclc.c @@ -132,7 +132,7 @@ txx9aclc_dma_submit(struct txx9aclc_dmadata *dmadata, dma_addr_t buf_dma_addr) sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf_dma_addr)), dmadata->frag_bytes, buf_dma_addr & (PAGE_SIZE - 1)); sg_dma_address(&sg) = buf_dma_addr; - desc = chan->device->device_prep_slave_sg(chan, &sg, 1, + desc = dmaengine_prep_slave_sg(chan, &sg, 1, dmadata->substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); -- cgit v1.2.3-70-g09d2 From 185ecb5f4fd43911c35956d4cc7d94a1da30417f Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Mar 2012 15:35:13 -0500 Subject: dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic Add context parameter to device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to allow passing client/target specific information associated with the data transfer. Modify all affected DMA engine drivers. Signed-off-by: Alexandre Bounine Acked-by: Linus Walleij Acked-by: Felipe Balbi Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 2 +- drivers/dma/at_hdmac.c | 7 +++++-- drivers/dma/coh901318.c | 2 +- drivers/dma/dw_dmac.c | 2 +- drivers/dma/ep93xx_dma.c | 6 ++++-- drivers/dma/fsldma.c | 4 +++- drivers/dma/imx-dma.c | 5 +++-- drivers/dma/imx-sdma.c | 5 +++-- drivers/dma/intel_mid_dma.c | 3 ++- drivers/dma/ipu/ipu_idmac.c | 3 ++- drivers/dma/mxs-dma.c | 5 +++-- drivers/dma/pch_dma.c | 3 ++- drivers/dma/pl330.c | 5 +++-- drivers/dma/shdma.c | 3 ++- drivers/dma/sirf-dma.c | 2 +- drivers/dma/ste_dma40.c | 5 +++-- drivers/dma/timb_dma.c | 3 ++- drivers/dma/txx9dmac.c | 2 +- include/linux/dmaengine.h | 12 +++++++----- 19 files changed, 49 insertions(+), 30 deletions(-) (limited to 'include/linux') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 1b53f260525..c301a8ec31a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1313,7 +1313,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 5d225ddc769..f24b16e455f 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -639,11 +639,12 @@ err_desc_get: * @sg_len: number of entries in @scatterlist * @direction: DMA direction * @flags: tx descriptor status flags + * @context: transaction context (ignored) */ static struct dma_async_tx_descriptor * atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma_slave *atslave = chan->private; @@ -840,10 +841,12 @@ atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, * @buf_len: total number of bytes for the entire buffer * @period_len: number of bytes for each period * @direction: transfer direction, to or from device + * @context: transfer context (ignored) */ static struct dma_async_tx_descriptor * atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma_slave *atslave = chan->private; diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 187bb9eef4a..dc89455f555 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -1021,7 +1021,7 @@ coh901318_prep_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, static struct dma_async_tx_descriptor * coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct coh901318_chan *cohc = to_coh901318_chan(chan); struct coh901318_lli *lli; diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index cb173bbdcfd..7439079f5ee 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -704,7 +704,7 @@ err_desc_get: static struct dma_async_tx_descriptor * dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); struct dw_dma_slave *dws = chan->private; diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index f25e83bf567..e6f133b78dc 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -975,13 +975,14 @@ fail: * @sg_len: number of entries in @sgl * @dir: direction of tha DMA transfer * @flags: flags for the descriptor + * @context: operation context (ignored) * * Returns a valid DMA descriptor or %NULL in case of failure. */ static struct dma_async_tx_descriptor * ep93xx_dma_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction dir, - unsigned long flags) + unsigned long flags, void *context) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); struct ep93xx_dma_desc *desc, *first; @@ -1048,6 +1049,7 @@ fail: * @buf_len: length of the buffer (in bytes) * @period_len: lenght of a single period * @dir: direction of the operation + * @context: operation context (ignored) * * Prepares a descriptor for cyclic DMA operation. This means that once the * descriptor is submitted, we will be submitting in a @period_len sized @@ -1060,7 +1062,7 @@ fail: static struct dma_async_tx_descriptor * ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction dir) + enum dma_transfer_direction dir, void *context) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); struct ep93xx_dma_desc *desc, *first; diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 7d7384b3462..8f84761f98b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -759,6 +759,7 @@ fail: * @sg_len: number of entries in @scatterlist * @direction: DMA direction * @flags: DMAEngine flags + * @context: transaction context (ignored) * * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the * DMA_SLAVE API, this gets the device-specific information from the @@ -766,7 +767,8 @@ fail: */ static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg( struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { /* * This operation is not supported on the Freescale DMA controller diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 20c1565a748..304839a99ae 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -354,7 +354,7 @@ static void imxdma_free_chan_resources(struct dma_chan *chan) static struct dma_async_tx_descriptor *imxdma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct scatterlist *sg; @@ -405,7 +405,8 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg( static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct imxdma_engine *imxdma = imxdmac->imxdma; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index f8259ee49f8..434fb610aa1 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -903,7 +903,7 @@ static void sdma_free_chan_resources(struct dma_chan *chan) static struct dma_async_tx_descriptor *sdma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; @@ -1001,7 +1001,8 @@ err_out: static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 2449812f546..c900ca7aaec 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -714,13 +714,14 @@ err_desc_get: * @sg_len: length of sg txn * @direction: DMA transfer dirtn * @flags: DMA flags + * @context: transfer context (ignored) * * Prepares LLI based periphral transfer */ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct intel_mid_dma_chan *midc = NULL; struct intel_mid_dma_slave *mids = NULL; diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 1880274b085..62e3f8ec246 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1335,7 +1335,8 @@ static void ipu_gc_tasklet(unsigned long arg) /* Allocate and initialise a transfer descriptor. */ static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long tx_flags) + enum dma_transfer_direction direction, unsigned long tx_flags, + void *context) { struct idmac_channel *ichan = to_idmac_chan(chan); struct idmac_tx_desc *desc = NULL; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index a2267f9ab56..65334c49b71 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -340,7 +340,7 @@ static void mxs_dma_free_chan_resources(struct dma_chan *chan) static struct dma_async_tx_descriptor *mxs_dma_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long append) + unsigned long append, void *context) { struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -435,7 +435,8 @@ err_out: static struct dma_async_tx_descriptor *mxs_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index c93bb045997..65c0495a6d4 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -587,7 +587,8 @@ static void pd_issue_pending(struct dma_chan *chan) static struct dma_async_tx_descriptor *pd_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { struct pch_dma_chan *pd_chan = to_pd_chan(chan); struct pch_dma_slave *pd_slave = chan->private; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index e863d7fc465..87d752a77f5 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2685,7 +2685,8 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t len, - size_t period_len, enum dma_transfer_direction direction) + size_t period_len, enum dma_transfer_direction direction, + void *context) { struct dma_pl330_desc *desc; struct dma_pl330_chan *pch = to_pchan(chan); @@ -2775,7 +2776,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, static struct dma_async_tx_descriptor * pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flg) + unsigned long flg, void *context) { struct dma_pl330_desc *first, *desc = NULL; struct dma_pl330_chan *pch = to_pchan(chan); diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 5c4088603dd..19d7a8d3975 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -669,7 +669,8 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy( static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { struct sh_dmae_slave *param; struct sh_dmae_chan *sh_chan; diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 45ba352fb87..434ad31174f 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -489,7 +489,7 @@ err_dir: static struct dma_async_tx_descriptor * sirfsoc_dma_prep_cyclic(struct dma_chan *chan, dma_addr_t addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction) + enum dma_transfer_direction direction, void *context) { struct sirfsoc_dma_chan *schan = dma_chan_to_sirfsoc_dma_chan(chan); struct sirfsoc_dma_desc *sdesc = NULL; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 1ea6d02d08a..bdd41d4bfa8 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2289,7 +2289,8 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long dma_flags) + unsigned long dma_flags, + void *context) { if (direction != DMA_DEV_TO_MEM && direction != DMA_MEM_TO_DEV) return NULL; @@ -2300,7 +2301,7 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan, static struct dma_async_tx_descriptor * dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction) + enum dma_transfer_direction direction, void *context) { unsigned int periods = buf_len / period_len; struct dma_async_tx_descriptor *txd; diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c index d408c220602..4e0dff59901 100644 --- a/drivers/dma/timb_dma.c +++ b/drivers/dma/timb_dma.c @@ -542,7 +542,8 @@ static void td_issue_pending(struct dma_chan *chan) static struct dma_async_tx_descriptor *td_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, - enum dma_transfer_direction direction, unsigned long flags) + enum dma_transfer_direction direction, unsigned long flags, + void *context) { struct timb_dma_chan *td_chan = container_of(chan, struct timb_dma_chan, chan); diff --git a/drivers/dma/txx9dmac.c b/drivers/dma/txx9dmac.c index 40440f94638..913f55c76c9 100644 --- a/drivers/dma/txx9dmac.c +++ b/drivers/dma/txx9dmac.c @@ -833,7 +833,7 @@ txx9dmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, static struct dma_async_tx_descriptor * txx9dmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags) + unsigned long flags, void *context) { struct txx9dmac_chan *dc = to_txx9dmac_chan(chan); struct txx9dmac_dev *ddev = dc->ddev; diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 03d68b7e570..b3b5b38776f 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -582,10 +582,11 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_slave_sg)( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_transfer_direction direction, - unsigned long flags); + unsigned long flags, void *context); struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction direction); + size_t period_len, enum dma_transfer_direction direction, + void *context); struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); @@ -619,7 +620,8 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( struct scatterlist sg; sg_init_one(&sg, buf, len); - return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); + return chan->device->device_prep_slave_sg(chan, &sg, 1, + dir, flags, NULL); } static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( @@ -627,7 +629,7 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( enum dma_transfer_direction dir, unsigned long flags) { return chan->device->device_prep_slave_sg(chan, sgl, sg_len, - dir, flags); + dir, flags, NULL); } static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( @@ -635,7 +637,7 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( size_t period_len, enum dma_transfer_direction dir) { return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len, - period_len, dir); + period_len, dir, NULL); } static inline int dmaengine_terminate_all(struct dma_chan *chan) -- cgit v1.2.3-70-g09d2 From 01a6e28b5096aea6801a21bdc20bf1de32833af5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 3 Feb 2012 13:17:48 -0300 Subject: edac: Improve the comments to better describe the memory concepts The Computer memory terminology has changed with time since EDAC was originally written: new concepts were introduced, and some things have different meanings, depending on the memory architecture. Improve the definition of all related terms. Also, describe each memory type in a more detailed fashion. No functional changes. Just comments were touched. Acked-by: Borislav Petkov Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 157 ++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 111 insertions(+), 46 deletions(-) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 1cd3947987e..0714d67a6e1 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -66,25 +66,64 @@ enum dev_type { #define DEV_FLAG_X32 BIT(DEV_X32) #define DEV_FLAG_X64 BIT(DEV_X64) -/* memory types */ +/** + * enum mem_type - memory types. For a more detailed reference, please see + * http://en.wikipedia.org/wiki/DRAM + * + * @MEM_EMPTY Empty csrow + * @MEM_RESERVED: Reserved csrow type + * @MEM_UNKNOWN: Unknown csrow type + * @MEM_FPM: FPM - Fast Page Mode, used on systems up to 1995. + * @MEM_EDO: EDO - Extended data out, used on systems up to 1998. + * @MEM_BEDO: BEDO - Burst Extended data out, an EDO variant. + * @MEM_SDR: SDR - Single data rate SDRAM + * http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory + * They use 3 pins for chip select: Pins 0 and 2 are + * for rank 0; pins 1 and 3 are for rank 1, if the memory + * is dual-rank. + * @MEM_RDR: Registered SDR SDRAM + * @MEM_DDR: Double data rate SDRAM + * http://en.wikipedia.org/wiki/DDR_SDRAM + * @MEM_RDDR: Registered Double data rate SDRAM + * This is a variant of the DDR memories. + * A registered memory has a buffer inside it, hiding + * part of the memory details to the memory controller. + * @MEM_RMBS: Rambus DRAM, used on a few Pentium III/IV controllers. + * @MEM_DDR2: DDR2 RAM, as described at JEDEC JESD79-2F. + * Those memories are labed as "PC2-" instead of "PC" to + * differenciate from DDR. + * @MEM_FB_DDR2: Fully-Buffered DDR2, as described at JEDEC Std No. 205 + * and JESD206. + * Those memories are accessed per DIMM slot, and not by + * a chip select signal. + * @MEM_RDDR2: Registered DDR2 RAM + * This is a variant of the DDR2 memories. + * @MEM_XDR: Rambus XDR + * It is an evolution of the original RAMBUS memories, + * created to compete with DDR2. Weren't used on any + * x86 arch, but cell_edac PPC memory controller uses it. + * @MEM_DDR3: DDR3 RAM + * @MEM_RDDR3: Registered DDR3 RAM + * This is a variant of the DDR3 memories. + */ enum mem_type { - MEM_EMPTY = 0, /* Empty csrow */ - MEM_RESERVED, /* Reserved csrow type */ - MEM_UNKNOWN, /* Unknown csrow type */ - MEM_FPM, /* Fast page mode */ - MEM_EDO, /* Extended data out */ - MEM_BEDO, /* Burst Extended data out */ - MEM_SDR, /* Single data rate SDRAM */ - MEM_RDR, /* Registered single data rate SDRAM */ - MEM_DDR, /* Double data rate SDRAM */ - MEM_RDDR, /* Registered Double data rate SDRAM */ - MEM_RMBS, /* Rambus DRAM */ - MEM_DDR2, /* DDR2 RAM */ - MEM_FB_DDR2, /* fully buffered DDR2 */ - MEM_RDDR2, /* Registered DDR2 RAM */ - MEM_XDR, /* Rambus XDR */ - MEM_DDR3, /* DDR3 RAM */ - MEM_RDDR3, /* Registered DDR3 RAM */ + MEM_EMPTY = 0, + MEM_RESERVED, + MEM_UNKNOWN, + MEM_FPM, + MEM_EDO, + MEM_BEDO, + MEM_SDR, + MEM_RDR, + MEM_DDR, + MEM_RDDR, + MEM_RMBS, + MEM_DDR2, + MEM_FB_DDR2, + MEM_RDDR2, + MEM_XDR, + MEM_DDR3, + MEM_RDDR3, }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) @@ -162,8 +201,9 @@ enum scrub_type { #define OP_OFFLINE 0x300 /* - * There are several things to be aware of that aren't at all obvious: + * Concepts used at the EDAC subsystem * + * There are several things to be aware of that aren't at all obvious: * * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. * @@ -172,36 +212,61 @@ enum scrub_type { * creating a common ground for discussion, terms and their definitions * will be established. * - * Memory devices: The individual chip on a memory stick. These devices - * commonly output 4 and 8 bits each. Grouping several - * of these in parallel provides 64 bits which is common - * for a memory stick. + * Memory devices: The individual DRAM chips on a memory stick. These + * devices commonly output 4 and 8 bits each (x4, x8). + * Grouping several of these in parallel provides the + * number of bits that the memory controller expects: + * typically 72 bits, in order to provide 64 bits + + * 8 bits of ECC data. * * Memory Stick: A printed circuit board that aggregates multiple - * memory devices in parallel. This is the atomic - * memory component that is purchaseable by Joe consumer - * and loaded into a memory socket. + * memory devices in parallel. In general, this is the + * Field Replaceable Unit (FRU) which gets replaced, in + * the case of excessive errors. Most often it is also + * called DIMM (Dual Inline Memory Module). * - * Socket: A physical connector on the motherboard that accepts - * a single memory stick. + * Memory Socket: A physical connector on the motherboard that accepts + * a single memory stick. Also called as "slot" on several + * datasheets. * - * Channel: Set of memory devices on a memory stick that must be - * grouped in parallel with one or more additional - * channels from other memory sticks. This parallel - * grouping of the output from multiple channels are - * necessary for the smallest granularity of memory access. - * Some memory controllers are capable of single channel - - * which means that memory sticks can be loaded - * individually. Other memory controllers are only - * capable of dual channel - which means that memory - * sticks must be loaded as pairs (see "socket set"). + * Channel: A memory controller channel, responsible to communicate + * with a group of DIMMs. Each channel has its own + * independent control (command) and data bus, and can + * be used independently or grouped with other channels. * - * Chip-select row: All of the memory devices that are selected together. - * for a single, minimum grain of memory access. - * This selects all of the parallel memory devices across - * all of the parallel channels. Common chip-select rows - * for single channel are 64 bits, for dual channel 128 - * bits. + * Branch: It is typically the highest hierarchy on a + * Fully-Buffered DIMM memory controller. + * Typically, it contains two channels. + * Two channels at the same branch can be used in single + * mode or in lockstep mode. + * When lockstep is enabled, the cacheline is doubled, + * but it generally brings some performance penalty. + * Also, it is generally not possible to point to just one + * memory stick when an error occurs, as the error + * correction code is calculated using two DIMMs instead + * of one. Due to that, it is capable of correcting more + * errors than on single mode. + * + * Single-channel: The data accessed by the memory controller is contained + * into one dimm only. E. g. if the data is 64 bits-wide, + * the data flows to the CPU using one 64 bits parallel + * access. + * Typically used with SDR, DDR, DDR2 and DDR3 memories. + * FB-DIMM and RAMBUS use a different concept for channel, + * so this concept doesn't apply there. + * + * Double-channel: The data size accessed by the memory controller is + * interlaced into two dimms, accessed at the same time. + * E. g. if the DIMM is 64 bits-wide (72 bits with ECC), + * the data flows to the CPU using a 128 bits parallel + * access. + * + * Chip-select row: This is the name of the DRAM signal used to select the + * DRAM ranks to be accessed. Common chip-select rows for + * single channel are 64 bits, for dual channel 128 bits. + * It may not be visible by the memory controller, as some + * DIMM types have a memory buffer that can hide direct + * access to it from the Memory Controller. * * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory. * Motherboards commonly drive two chip-select pins to @@ -214,8 +279,8 @@ enum scrub_type { * * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. * A double-sided stick has two chip-select rows which - * access different sets of memory devices. The two - * rows cannot be accessed concurrently. "Double-sided" + * access different sets of memory devices. The two + * rows cannot be accessed concurrently. "Double-sided" * is irrespective of the memory devices being mounted * on both sides of the memory stick. * -- cgit v1.2.3-70-g09d2 From a4b4be3fd7a76021f67380b03d8bccebf067db72 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 27 Jan 2012 10:26:13 -0300 Subject: edac: rename channel_info to rank_info What it is pointed by a csrow/channel vector is a rank information, and not a channel information. On a traditional architecture, the memory controller directly access the memory ranks, via chip select rows. Different ranks at the same DIMM is selected via different chip select rows. So, typically, one csrow/channel pair means one different DIMM. On FB-DIMMs, there's a microcontroller chip at the DIMM, called Advanced Memory Buffer (AMB) that serves as the interface between the memory controller and the memory chips. The AMB selection is via the DIMM slot, and not via a csrow. It is up to the AMB to talk with the csrows of the DRAM chips. So, the FB-DIMM memory controllers see the DIMM slot, and not the DIMM rank. RAMBUS is similar. Newer memory controllers, like the ones found on Intel Sandy Bridge and Nehalem, even working with normal DDR3 DIMM's, don't use the usual channel A/channel B interleaving schema to provide 128 bits data access. Instead, they have more channels (3 or 4 channels), and they can use several interleaving schemas. Such memory controllers see the DIMMs directly on their registers, instead of the ranks, which is better for the driver, as its main usageis to point to a broken DIMM stick (the Field Repleceable Unit), and not to point to a broken DRAM chip. The drivers that support such such newer memory architecture models currently need to fake information and to abuse on EDAC structures, as the subsystem was conceived with the idea that the csrow would always be visible by the CPU. To make things a little worse, those drivers don't currently fake csrows/channels on a consistent way, as the concepts there don't apply to the memory controllers they're talking with. So, each driver author interpreted the concepts using a different logic. In order to fix it, let's rename the data structure that points into a DIMM rank to "rank_info", in order to be clearer about what's stored there. Latter patches will provide a better way to represent the memory hierarchy for the other types of memory controller. Signed-off-by: Mauro Carvalho Chehab --- drivers/edac/edac_mc.c | 6 +++--- include/linux/edac.h | 22 +++++++++++++++++----- 2 files changed, 20 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index ca6c04d350e..690cbf15a00 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -39,7 +39,7 @@ static LIST_HEAD(mc_devices); #ifdef CONFIG_EDAC_DEBUG -static void edac_mc_dump_channel(struct channel_info *chan) +static void edac_mc_dump_channel(struct rank_info *chan) { debugf4("\tchannel = %p\n", chan); debugf4("\tchannel->chan_idx = %d\n", chan->chan_idx); @@ -156,7 +156,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, { struct mem_ctl_info *mci; struct csrow_info *csi, *csrow; - struct channel_info *chi, *chp, *chan; + struct rank_info *chi, *chp, *chan; void *pvt; unsigned size; int row, chn; @@ -181,7 +181,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, * rather than an imaginary chunk of memory located at address 0. */ csi = (struct csrow_info *)(((char *)mci) + ((unsigned long)csi)); - chi = (struct channel_info *)(((char *)mci) + ((unsigned long)chi)); + chi = (struct rank_info *)(((char *)mci) + ((unsigned long)chi)); pvt = sz_pvt ? (((char *)mci) + ((unsigned long)pvt)) : NULL; /* setup index and various internal pointers */ diff --git a/include/linux/edac.h b/include/linux/edac.h index 0714d67a6e1..e3e3d26c638 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -308,10 +308,22 @@ enum scrub_type { * PS - I enjoyed writing all that about as much as you enjoyed reading it. */ -struct channel_info { - int chan_idx; /* channel index */ - u32 ce_count; /* Correctable Errors for this CHANNEL */ - char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ +/** + * struct rank_info - contains the information for one DIMM rank + * + * @chan_idx: channel number where the rank is (typically, 0 or 1) + * @ce_count: number of correctable errors for this rank + * @label: DIMM label. Different ranks for the same DIMM should be + * filled, on userspace, with the same label. + * FIXME: The core currently won't enforce it. + * @csrow: A pointer to the chip select row structure (the parent + * structure). The location of the rank is given by + * the (csrow->csrow_idx, chan_idx) vector. + */ +struct rank_info { + int chan_idx; + u32 ce_count; + char label[EDAC_MC_LABEL_LEN + 1]; struct csrow_info *csrow; /* the parent */ }; @@ -335,7 +347,7 @@ struct csrow_info { /* channel information for this csrow */ u32 nr_channels; - struct channel_info *channels; + struct rank_info *channels; }; struct mcidev_sysfs_group { -- cgit v1.2.3-70-g09d2 From fd7cdddf9fe0fc63a10233223cf9fd774b33612c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 21 Mar 2012 21:38:59 +0100 Subject: Revert "mfd: Add platform data for MAX8997 haptic driver" This reverts commit 02b09703e7a411f80e5ec037b3abf14061a61933. Signed-off-by: Samuel Ortiz --- include/linux/mfd/max8997.h | 53 +-------------------------------------------- 1 file changed, 1 insertion(+), 52 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 9d8006b4a13..fff590521e5 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -153,55 +153,6 @@ struct max8997_led_platform_data { u8 brightness[2]; }; -enum max8997_haptic_motor_type { - MAX8997_HAPTIC_ERM, - MAX8997_HAPTIC_LRA, -}; - -enum max8997_haptic_pulse_mode { - MAX8997_EXTERNAL_MODE, - MAX8997_INTERNAL_MODE, -}; - -enum max8997_haptic_pwm_divisor { - MAX8997_PWM_DIVISOR_32, - MAX8997_PWM_DIVISOR_64, - MAX8997_PWM_DIVISOR_128, - MAX8997_PWM_DIVISOR_256, -}; - -/* - * max8997_haptic_platform_data - * @pwm_channel_id: channel number of PWM device - * valid for MAX8997_EXTERNAL_MODE - * @pwm_period: period in nano second for PWM device - * valid for MAX8997_EXTERNAL_MODE - * @type: motor type - * @mode: pulse mode - * MAX8997_EXTERNAL_MODE: external PWM device is used to control motor - * MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor - * @pwm_divisor: divisor for external PWM device - * @internal_mode_pattern: internal mode pattern for internal mode - * [0 - 3]: valid pattern number - * @pattern_cycle: the number of cycles of the waveform - * for the internal mode pattern - * [0 - 15]: available cycles - * @pattern_signal_period: period of the waveform for the internal mode pattern - * [0 - 255]: available period - */ -struct max8997_haptic_platform_data { - int pwm_channel_id; - int pwm_period; - - enum max8997_haptic_motor_type type; - enum max8997_haptic_pulse_mode mode; - enum max8997_haptic_pwm_divisor pwm_divisor; - - int internal_mode_pattern; - int pattern_cycle; - int pattern_signal_period; -}; - struct max8997_platform_data { /* IRQ */ int irq_base; @@ -241,9 +192,7 @@ struct max8997_platform_data { /* ---- MUIC ---- */ struct max8997_muic_platform_data *muic_pdata; - /* ---- HAPTIC ---- */ - struct max8997_haptic_platform_data *haptic_pdata; - + /* HAPTIC: Not implemented */ /* RTC: Not implemented */ /* ---- LED ---- */ struct max8997_led_platform_data *led_pdata; -- cgit v1.2.3-70-g09d2 From 9d547c35799a4ddd235f1565cec2fff6c9263504 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 21 Mar 2012 22:34:55 -0400 Subject: vfs: remove unused superblock helpers Remove the 'sb_mark_dirty()', 'sb_mark_clean()' and 'sb_is_dirty()' helpers which are not used. I introduced them 2 years and the intention was to make all file-systems use them in order to be able to optimize 'sync_supers()'. However, Al Viro vetoed my patches at the end and asked me to push superblock management down to file-systems and get rid of the 's_dirt' flag completely, as well as kill 'sync_supers()' altogether. Thus, remove the helpers. Signed-off-by: Artem Bityutskiy Cc: Al Viro Signed-off-by: "Theodore Ts'o" --- include/linux/fs.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 386da09f229..526072c073f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1870,19 +1870,6 @@ extern struct dentry *mount_pseudo(struct file_system_type *, char *, const struct dentry_operations *dops, unsigned long); -static inline void sb_mark_dirty(struct super_block *sb) -{ - sb->s_dirt = 1; -} -static inline void sb_mark_clean(struct super_block *sb) -{ - sb->s_dirt = 0; -} -static inline int sb_is_dirty(struct super_block *sb) -{ - return sb->s_dirt; -} - /* Alas, no aliases. Too much hassle with bringing module.h everywhere */ #define fops_get(fops) \ (((fops) && try_module_get((fops)->owner) ? (fops) : NULL)) -- cgit v1.2.3-70-g09d2 From 6a92c36688bd6d8e68e19ca9b5e41e8197921b59 Mon Sep 17 00:00:00 2001 From: Vincenzo Frascino Date: Wed, 21 Mar 2012 12:55:03 -0700 Subject: thermal: add support for thermal sensor present on SPEAr13xx machines ST's SPEAr13xx machines are based on CortexA9 ARM processors. These machines contain a thermal sensor for junction temperature monitoring. This patch adds support for this thermal sensor in existing thermal framework. [akpm@linux-foundation.org: little code cleanup] [akpm@linux-foundation.org: print the pointer correctly] [viresh.kumar@st.com: thermal/spear_thermal: add compilation dependency on PLAT_SPEAR] Signed-off-by: Vincenzo Frascino Signed-off-by: Viresh Kumar Signed-off-by: Viresh Kumar Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/Kconfig | 8 ++ drivers/thermal/Makefile | 1 + drivers/thermal/spear_thermal.c | 206 ++++++++++++++++++++++++++++ include/linux/platform_data/spear_thermal.h | 26 ++++ 4 files changed, 241 insertions(+) create mode 100644 drivers/thermal/spear_thermal.c create mode 100644 include/linux/platform_data/spear_thermal.h (limited to 'include/linux') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index f7f71b2d310..514a691abea 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -18,3 +18,11 @@ config THERMAL_HWMON depends on THERMAL depends on HWMON=y || HWMON=THERMAL default y + +config SPEAR_THERMAL + bool "SPEAr thermal sensor driver" + depends on THERMAL + depends on PLAT_SPEAR + help + Enable this to plug the SPEAr thermal sensor driver into the Linux + thermal framework diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31108a01c22..a9fff0bf4b1 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o +obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o \ No newline at end of file diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c new file mode 100644 index 00000000000..880bf289aa6 --- /dev/null +++ b/drivers/thermal/spear_thermal.c @@ -0,0 +1,206 @@ +/* + * SPEAr thermal driver. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MD_FACTOR 1000 + +/* SPEAr Thermal Sensor Dev Structure */ +struct spear_thermal_dev { + /* pointer to base address of the thermal sensor */ + void __iomem *thermal_base; + /* clk structure */ + struct clk *clk; + /* pointer to thermal flags */ + unsigned int flags; +}; + +static inline int thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + struct spear_thermal_dev *stdev = thermal->devdata; + + /* + * Data are ready to be read after 628 usec from POWERDOWN signal + * (PDN) = 1 + */ + *temp = (readl(stdev->thermal_base) & 0x7F) * MD_FACTOR; + return 0; +} + +static struct thermal_zone_device_ops ops = { + .get_temp = thermal_get_temp, +}; + +#ifdef CONFIG_PM +static int spear_thermal_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + dev_info(dev, "Suspended.\n"); + + return 0; +} + +static int spear_thermal_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + unsigned int actual_mask = 0; + int ret = 0; + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + return ret; + } + + /* Enable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask | stdev->flags, stdev->thermal_base); + + dev_info(dev, "Resumed.\n"); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear_thermal_pm_ops, spear_thermal_suspend, + spear_thermal_resume); + +static int spear_thermal_probe(struct platform_device *pdev) +{ + struct thermal_zone_device *spear_thermal = NULL; + struct spear_thermal_dev *stdev; + struct spear_thermal_pdata *pdata; + int ret = 0; + struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!stres) { + dev_err(&pdev->dev, "memory resource missing\n"); + return -ENODEV; + } + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "platform data is NULL\n"); + return -EINVAL; + } + + stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); + if (!stdev) { + dev_err(&pdev->dev, "kzalloc fail\n"); + return -ENOMEM; + } + + /* Enable thermal sensor */ + stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, + resource_size(stres)); + if (!stdev->thermal_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + stdev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(stdev->clk)) { + dev_err(&pdev->dev, "Can't get clock\n"); + return PTR_ERR(stdev->clk); + } + + ret = clk_enable(stdev->clk); + if (ret) { + dev_err(&pdev->dev, "Can't enable clock\n"); + goto put_clk; + } + + stdev->flags = pdata->thermal_flags; + writel(stdev->flags, stdev->thermal_base); + + spear_thermal = thermal_zone_device_register("spear_thermal", 0, + stdev, &ops, 0, 0, 0, 0); + if (!spear_thermal) { + dev_err(&pdev->dev, "thermal zone device is NULL\n"); + ret = -EINVAL; + goto disable_clk; + } + + platform_set_drvdata(pdev, spear_thermal); + + dev_info(&spear_thermal->device, "Thermal Sensor Loaded at: 0x%p.\n", + stdev->thermal_base); + + return 0; + +disable_clk: + clk_disable(stdev->clk); +put_clk: + clk_put(stdev->clk); + + return ret; +} + +static int spear_thermal_exit(struct platform_device *pdev) +{ + unsigned int actual_mask = 0; + struct thermal_zone_device *spear_thermal = platform_get_drvdata(pdev); + struct spear_thermal_dev *stdev = spear_thermal->devdata; + + thermal_zone_device_unregister(spear_thermal); + platform_set_drvdata(pdev, NULL); + + /* Disable SPEAr Thermal Sensor */ + actual_mask = readl(stdev->thermal_base); + writel(actual_mask & ~stdev->flags, stdev->thermal_base); + + clk_disable(stdev->clk); + clk_put(stdev->clk); + + return 0; +} + +static struct platform_driver spear_thermal_driver = { + .probe = spear_thermal_probe, + .remove = spear_thermal_exit, + .driver = { + .name = "spear_thermal", + .owner = THIS_MODULE, + .pm = &spear_thermal_pm_ops, + }, +}; + +module_platform_driver(spear_thermal_driver); + +MODULE_AUTHOR("Vincenzo Frascino "); +MODULE_DESCRIPTION("SPEAr thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h new file mode 100644 index 00000000000..724f2e1cbbc --- /dev/null +++ b/include/linux/platform_data/spear_thermal.h @@ -0,0 +1,26 @@ +/* + * SPEAr thermal driver platform data. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef SPEAR_THERMAL_H +#define SPEAR_THERMAL_H + +/* SPEAr Thermal Sensor Platform Data */ +struct spear_thermal_pdata { + /* flags used to enable thermal sensor */ + unsigned int thermal_flags; +}; + +#endif /* SPEAR_THERMAL_H */ -- cgit v1.2.3-70-g09d2 From f01b1f90bf46ddaf2a68215a9489364c974e5689 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 29 Feb 2012 22:38:06 +0100 Subject: mfd: Make twl4030 SIH SPARSE_IRQ capable twl4030 is using a two level irq controllers infrastruture. So far, only the first level was using dynamic irq_desc allocation to be able to have irq_domain support for device tree. There is a need to allocate separate irq_descs for the SIH too to avoid hacking the first level with interrupts from the second level. Add an irq_base parameter to allow the caller to provide the base from pdata or from dynamic allocation. Affect TWL4030_NR_IRQS to the twl-core IRQs only. Moreover that will allow the extraction of the of_node pointer for further Device Tree conversion. Signed-off-by: Felipe Balbi Signed-off-by: Benoit Cousson Signed-off-by: Samuel Ortiz --- drivers/gpio/gpio-twl4030.c | 3 ++- drivers/mfd/twl4030-irq.c | 23 ++++++----------------- include/linux/i2c/twl.h | 2 +- 3 files changed, 9 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index b8b4f228757..697396c7462 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -404,7 +404,8 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev) "can't dispatch IRQs from modules\n"); goto no_irqs; } - ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); + ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, + pdata->irq_base); if (ret < 0) return ret; WARN_ON(ret != pdata->irq_base); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index a3dc1d92907..d6f3a5e9f7b 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -629,28 +629,21 @@ static irqreturn_t handle_twl4030_sih(int irq, void *data) return IRQ_HANDLED; } -static unsigned twl4030_irq_next; - /* returns the first IRQ used by this SIH bank, or negative errno */ -int twl4030_sih_setup(int module) +int twl4030_sih_setup(struct device *dev, int module, int irq_base) { int sih_mod; const struct sih *sih = NULL; struct sih_agent *agent; int i, irq; int status = -EINVAL; - unsigned irq_base = twl4030_irq_next; /* only support modules with standard clear-on-read for now */ for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules; sih_mod++, sih++) { if (sih->module == module && sih->set_cor) { - if (!WARN((irq_base + sih->bits) > NR_IRQS, - "irq %d for %s too big\n", - irq_base + sih->bits, - sih->name)) - status = 0; + status = 0; break; } } @@ -661,8 +654,6 @@ int twl4030_sih_setup(int module) if (!agent) return -ENOMEM; - status = 0; - agent->irq_base = irq_base; agent->sih = sih; agent->imr = ~0; @@ -678,8 +669,6 @@ int twl4030_sih_setup(int module) activate_irq(irq); } - twl4030_irq_next += i; - /* replace generic PIH handler (handle_simple_irq) */ irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); @@ -688,7 +677,7 @@ int twl4030_sih_setup(int module) agent->irq_name ?: sih->name, NULL); pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, - irq, irq_base, twl4030_irq_next - 1); + irq, irq_base, irq_base + i - 1); return status < 0 ? status : irq_base; } @@ -752,12 +741,12 @@ int twl4030_init_irq(struct device *dev, int irq_num) irq_set_nested_thread(i, 1); activate_irq(i); } - twl4030_irq_next = i; + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", - irq_num, irq_base, twl4030_irq_next - 1); + irq_num, irq_base, irq_end); /* ... and the PWR_INT module ... */ - status = twl4030_sih_setup(TWL4030_MODULE_INT); + status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end); if (status < 0) { pr_err("twl4030: sih_setup PWR INT --> %d\n", status); goto fail; diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 78d3465251d..8b9904abd9c 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -751,7 +751,7 @@ struct twl4030_platform_data { /*----------------------------------------------------------------------*/ -int twl4030_sih_setup(int module); +int twl4030_sih_setup(struct device *dev, int module, int irq_base); /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B -- cgit v1.2.3-70-g09d2 From 83e72dd97a25a831ff270ce4437416943a1e4b36 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Fri, 16 Mar 2012 14:41:21 -0500 Subject: apple_bl: Add register/unregister functions Add functions to allow other modules to enable or disable apple_bl. This will be used by the gmux driver to disable apple_bl when the gmux is present, as it is a better and more reliable option for brightness control. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett --- drivers/video/backlight/apple_bl.c | 23 +++++++++++++++++++++-- include/linux/apple_bl.h | 26 ++++++++++++++++++++++++++ 2 files changed, 47 insertions(+), 2 deletions(-) create mode 100644 include/linux/apple_bl.h (limited to 'include/linux') diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c index be98d152b7f..a523b255e12 100644 --- a/drivers/video/backlight/apple_bl.c +++ b/drivers/video/backlight/apple_bl.c @@ -24,6 +24,7 @@ #include #include #include +#include static struct backlight_device *apple_backlight_device; @@ -221,14 +222,32 @@ static struct acpi_driver apple_bl_driver = { }, }; +static atomic_t apple_bl_registered = ATOMIC_INIT(0); + +int apple_bl_register(void) +{ + if (atomic_xchg(&apple_bl_registered, 1) == 0) + return acpi_bus_register_driver(&apple_bl_driver); + + return 0; +} +EXPORT_SYMBOL_GPL(apple_bl_register); + +void apple_bl_unregister(void) +{ + if (atomic_xchg(&apple_bl_registered, 0) == 1) + acpi_bus_unregister_driver(&apple_bl_driver); +} +EXPORT_SYMBOL_GPL(apple_bl_unregister); + static int __init apple_bl_init(void) { - return acpi_bus_register_driver(&apple_bl_driver); + return apple_bl_register(); } static void __exit apple_bl_exit(void) { - acpi_bus_unregister_driver(&apple_bl_driver); + apple_bl_unregister(); } module_init(apple_bl_init); diff --git a/include/linux/apple_bl.h b/include/linux/apple_bl.h new file mode 100644 index 00000000000..47bedc0eee6 --- /dev/null +++ b/include/linux/apple_bl.h @@ -0,0 +1,26 @@ +/* + * apple_bl exported symbols + */ + +#ifndef _LINUX_APPLE_BL_H +#define _LINUX_APPLE_BL_H + +#ifdef CONFIG_BACKLIGHT_APPLE + +extern int apple_bl_register(void); +extern void apple_bl_unregister(void); + +#else /* !CONFIG_BACKLIGHT_APPLE */ + +static inline int apple_bl_register(void) +{ + return 0; +} + +static inline void apple_bl_unregister(void) +{ +} + +#endif /* !CONFIG_BACKLIGHT_APPLE */ + +#endif /* _LINUX_APPLE_BL_H */ -- cgit v1.2.3-70-g09d2 From 5766651971e81298732466c9aa462ff47898ba37 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 23 Jan 2012 15:49:27 -0600 Subject: ceph: use a shared zero page rather than one per messenger Each messenger allocates a page to be used when writing zeroes out in the event of error or other abnormal condition. Instead, use the kernel ZERO_PAGE() for that purpose. Signed-off-by: Alex Elder Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 1 - net/ceph/messenger.c | 43 ++++++++++++++++++++++++++++-------------- 2 files changed, 29 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index ffbeb2c217b..6b5af5f976d 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -54,7 +54,6 @@ struct ceph_connection_operations { struct ceph_messenger { struct ceph_entity_inst inst; /* my name+address */ struct ceph_entity_addr my_enc_addr; - struct page *zero_page; /* used in certain error cases */ bool nocrc; diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index d11f91b0545..738356255e0 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -52,6 +52,9 @@ static char addr_str[MAX_ADDR_STR][MAX_ADDR_STR_LEN]; static DEFINE_SPINLOCK(addr_str_lock); static int last_addr_str; +static struct page *zero_page; /* used in certain error cases */ +static void *zero_page_address; /* kernel virtual addr of zero_page */ + const char *ceph_pr_addr(const struct sockaddr_storage *ss) { int i; @@ -99,18 +102,41 @@ struct workqueue_struct *ceph_msgr_wq; int ceph_msgr_init(void) { + BUG_ON(zero_page != NULL); + zero_page = ZERO_PAGE(0); + page_cache_get(zero_page); + + BUG_ON(zero_page_address != NULL); + zero_page_address = kmap(zero_page); + ceph_msgr_wq = alloc_workqueue("ceph-msgr", WQ_NON_REENTRANT, 0); if (!ceph_msgr_wq) { pr_err("msgr_init failed to create workqueue\n"); + + zero_page_address = NULL; + kunmap(zero_page); + page_cache_release(zero_page); + zero_page = NULL; + return -ENOMEM; } + return 0; } EXPORT_SYMBOL(ceph_msgr_init); void ceph_msgr_exit(void) { + BUG_ON(ceph_msgr_wq == NULL); destroy_workqueue(ceph_msgr_wq); + + BUG_ON(zero_page_address == NULL); + zero_page_address = NULL; + + BUG_ON(zero_page == NULL); + kunmap(zero_page); + page_cache_release(zero_page); + zero_page = NULL; } EXPORT_SYMBOL(ceph_msgr_exit); @@ -841,9 +867,9 @@ static int write_partial_msg_pages(struct ceph_connection *con) max_write = bv->bv_len; #endif } else { - page = con->msgr->zero_page; + page = zero_page; if (crc) - kaddr = page_address(con->msgr->zero_page); + kaddr = zero_page_address; } len = min_t(int, max_write - con->out_msg_pos.page_pos, total_max_write); @@ -914,7 +940,7 @@ static int write_partial_skip(struct ceph_connection *con) while (con->out_skip > 0) { struct kvec iov = { - .iov_base = page_address(con->msgr->zero_page), + .iov_base = zero_page_address, .iov_len = min(con->out_skip, (int)PAGE_CACHE_SIZE) }; @@ -2222,15 +2248,6 @@ struct ceph_messenger *ceph_messenger_create(struct ceph_entity_addr *myaddr, spin_lock_init(&msgr->global_seq_lock); - /* the zero page is needed if a request is "canceled" while the message - * is being written over the socket */ - msgr->zero_page = __page_cache_alloc(GFP_KERNEL | __GFP_ZERO); - if (!msgr->zero_page) { - kfree(msgr); - return ERR_PTR(-ENOMEM); - } - kmap(msgr->zero_page); - if (myaddr) msgr->inst.addr = *myaddr; @@ -2247,8 +2264,6 @@ EXPORT_SYMBOL(ceph_messenger_create); void ceph_messenger_destroy(struct ceph_messenger *msgr) { dout("destroy %p\n", msgr); - kunmap(msgr->zero_page); - __free_page(msgr->zero_page); kfree(msgr); dout("destroyed messenger %p\n", msgr); } -- cgit v1.2.3-70-g09d2 From ee57741c5209154b8ef124bcaa2496da1b69a988 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 24 Jan 2012 10:08:36 -0600 Subject: rbd: make ceph_parse_options() return a pointer ceph_parse_options() takes the address of a pointer as an argument and uses it to return the address of an allocated structure if successful. With this interface is not evident at call sites that the pointer is always initialized. Change the interface to return the address instead (or a pointer-coded error code) to make the validity of the returned pointer obvious. Signed-off-by: Alex Elder Signed-off-by: Sage Weil --- drivers/block/rbd.c | 6 ++++-- fs/ceph/super.c | 6 ++++-- include/linux/ceph/libceph.h | 2 +- net/ceph/ceph_common.c | 16 ++++++++-------- 4 files changed, 17 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index b9371f0b953..ed6711e3532 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -371,11 +371,13 @@ static int rbd_get_client(struct rbd_device *rbd_dev, const char *mon_addr, rbd_opts->notify_timeout = RBD_NOTIFY_TIMEOUT_DEFAULT; - ret = ceph_parse_options(&opt, options, mon_addr, + opt = ceph_parse_options(options, mon_addr, mon_addr + strlen(mon_addr), parse_rbd_opts_token, rbd_opts); - if (ret < 0) + if (IS_ERR(opt)) { + ret = PTR_ERR(opt); goto done_err; + } spin_lock(&node_lock); rbdc = __rbd_client_find(opt); diff --git a/fs/ceph/super.c b/fs/ceph/super.c index c3da3b32bdd..4fab1fdcfa6 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -334,10 +334,12 @@ static int parse_mount_options(struct ceph_mount_options **pfsopt, *path += 2; dout("server path '%s'\n", *path); - err = ceph_parse_options(popt, options, dev_name, dev_name_end, + *popt = ceph_parse_options(options, dev_name, dev_name_end, parse_fsopt_token, (void *)fsopt); - if (err) + if (IS_ERR(*popt)) { + err = PTR_ERR(*popt); goto out; + } /* success */ *pfsopt = fsopt; diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 95bd8502e71..92eef7c3d3c 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -207,7 +207,7 @@ extern struct kmem_cache *ceph_cap_cachep; extern struct kmem_cache *ceph_dentry_cachep; extern struct kmem_cache *ceph_file_cachep; -extern int ceph_parse_options(struct ceph_options **popt, char *options, +extern struct ceph_options *ceph_parse_options(char *options, const char *dev_name, const char *dev_name_end, int (*parse_extra_token)(char *c, void *private), void *private); diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c index 761ad9d6cc3..621c3221b39 100644 --- a/net/ceph/ceph_common.c +++ b/net/ceph/ceph_common.c @@ -277,10 +277,11 @@ out: return err; } -int ceph_parse_options(struct ceph_options **popt, char *options, - const char *dev_name, const char *dev_name_end, - int (*parse_extra_token)(char *c, void *private), - void *private) +struct ceph_options * +ceph_parse_options(char *options, const char *dev_name, + const char *dev_name_end, + int (*parse_extra_token)(char *c, void *private), + void *private) { struct ceph_options *opt; const char *c; @@ -289,7 +290,7 @@ int ceph_parse_options(struct ceph_options **popt, char *options, opt = kzalloc(sizeof(*opt), GFP_KERNEL); if (!opt) - return err; + return ERR_PTR(-ENOMEM); opt->mon_addr = kcalloc(CEPH_MAX_MON, sizeof(*opt->mon_addr), GFP_KERNEL); if (!opt->mon_addr) @@ -412,12 +413,11 @@ int ceph_parse_options(struct ceph_options **popt, char *options, } /* success */ - *popt = opt; - return 0; + return opt; out: ceph_destroy_options(opt); - return err; + return ERR_PTR(err); } EXPORT_SYMBOL(ceph_parse_options); -- cgit v1.2.3-70-g09d2 From e0f43c9419c1900e5b50de4261e9686a45a0a2b8 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 14 Feb 2012 14:05:33 -0600 Subject: libceph: make ceph_msgr_wq private The messenger workqueue has no need to be public. So give it static scope. Signed-off-by: Alex Elder Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 2 -- net/ceph/messenger.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 6b5af5f976d..5ca0f824420 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -14,8 +14,6 @@ struct ceph_msg; struct ceph_connection; -extern struct workqueue_struct *ceph_msgr_wq; /* receive work queue */ - /* * Ceph defines these callbacks for handling connection events. */ diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 04d2b975ab0..31f59ac03d8 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -97,7 +97,7 @@ static void encode_my_addr(struct ceph_messenger *msgr) /* * work queue for all reading and writing to/from the socket. */ -struct workqueue_struct *ceph_msgr_wq; +static struct workqueue_struct *ceph_msgr_wq; int ceph_msgr_init(void) { -- cgit v1.2.3-70-g09d2 From bca064d236a2e3162a07c758855221bcbe3c475b Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Wed, 15 Feb 2012 07:43:54 -0600 Subject: libceph: use "do" in CRC-related Boolean variables Change the name (and type) of a few CRC-related Boolean local variables so they contain the word "do", to distingish their purpose from variables used for holding an actual CRC value. Note that in the process of doing this I identified a fairly serious logic error in write_partial_msg_pages(): the value of "do_crc" assigned appears to be the opposite of what it should be. No attempt to fix this is made here; this change preserves the erroneous behavior. The problem I found is documented here: http://tracker.newdream.net/issues/2064 Signed-off-by: Alex Elder Signed-off-by: Sage Weil --- include/linux/ceph/messenger.h | 2 +- net/ceph/messenger.c | 40 ++++++++++++++++++++-------------------- 2 files changed, 21 insertions(+), 21 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index 5ca0f824420..3bff047f6b0 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -98,7 +98,7 @@ struct ceph_msg { struct ceph_msg_pos { int page, page_pos; /* which page; offset in page */ int data_pos; /* offset in data payload */ - int did_page_crc; /* true if we've calculated crc for current page */ + bool did_page_crc; /* true if we've calculated crc for current page */ }; /* ceph connection fault delay defaults, for exponential backoff */ diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 44d8c77cabd..204e229e662 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -595,7 +595,7 @@ static void prepare_write_message(struct ceph_connection *con) else con->out_msg_pos.page_pos = 0; con->out_msg_pos.data_pos = 0; - con->out_msg_pos.did_page_crc = 0; + con->out_msg_pos.did_page_crc = false; con->out_more = 1; /* data + footer will follow */ } else { /* no, queue up footer too and be done */ @@ -805,7 +805,7 @@ static int write_partial_msg_pages(struct ceph_connection *con) struct ceph_msg *msg = con->out_msg; unsigned data_len = le32_to_cpu(msg->hdr.data_len); size_t len; - int crc = con->msgr->nocrc; + bool do_crc = con->msgr->nocrc; int ret; int total_max_write; int in_trail = 0; @@ -843,17 +843,17 @@ static int write_partial_msg_pages(struct ceph_connection *con) page = list_first_entry(&msg->trail->head, struct page, lru); - if (crc) + if (do_crc) kaddr = kmap(page); max_write = PAGE_SIZE; } else if (msg->pages) { page = msg->pages[con->out_msg_pos.page]; - if (crc) + if (do_crc) kaddr = kmap(page); } else if (msg->pagelist) { page = list_first_entry(&msg->pagelist->head, struct page, lru); - if (crc) + if (do_crc) kaddr = kmap(page); #ifdef CONFIG_BLOCK } else if (msg->bio) { @@ -862,26 +862,26 @@ static int write_partial_msg_pages(struct ceph_connection *con) bv = bio_iovec_idx(msg->bio_iter, msg->bio_seg); page = bv->bv_page; page_shift = bv->bv_offset; - if (crc) + if (do_crc) kaddr = kmap(page) + page_shift; max_write = bv->bv_len; #endif } else { page = zero_page; - if (crc) + if (do_crc) kaddr = zero_page_address; } len = min_t(int, max_write - con->out_msg_pos.page_pos, total_max_write); - if (crc && !con->out_msg_pos.did_page_crc) { + if (do_crc && !con->out_msg_pos.did_page_crc) { void *base = kaddr + con->out_msg_pos.page_pos; u32 tmpcrc = le32_to_cpu(con->out_msg->footer.data_crc); BUG_ON(kaddr == NULL); con->out_msg->footer.data_crc = cpu_to_le32(crc32c(tmpcrc, base, len)); - con->out_msg_pos.did_page_crc = 1; + con->out_msg_pos.did_page_crc = true; } ret = kernel_sendpage(con->sock, page, con->out_msg_pos.page_pos + page_shift, @@ -889,7 +889,7 @@ static int write_partial_msg_pages(struct ceph_connection *con) MSG_DONTWAIT | MSG_NOSIGNAL | MSG_MORE); - if (crc && + if (do_crc && (msg->pages || msg->pagelist || msg->bio || in_trail)) kunmap(page); @@ -903,7 +903,7 @@ static int write_partial_msg_pages(struct ceph_connection *con) if (ret == len) { con->out_msg_pos.page_pos = 0; con->out_msg_pos.page++; - con->out_msg_pos.did_page_crc = 0; + con->out_msg_pos.did_page_crc = false; if (in_trail) list_move_tail(&page->lru, &msg->trail->head); @@ -920,7 +920,7 @@ static int write_partial_msg_pages(struct ceph_connection *con) dout("write_partial_msg_pages %p msg %p done\n", con, msg); /* prepare and queue up footer, too */ - if (!crc) + if (!do_crc) con->out_msg->footer.flags |= CEPH_MSG_FOOTER_NOCRC; ceph_con_out_kvec_reset(con); prepare_write_message_footer(con); @@ -1557,7 +1557,7 @@ static struct ceph_msg *ceph_alloc_msg(struct ceph_connection *con, static int read_partial_message_pages(struct ceph_connection *con, struct page **pages, - unsigned data_len, int datacrc) + unsigned data_len, bool do_datacrc) { void *p; int ret; @@ -1570,7 +1570,7 @@ static int read_partial_message_pages(struct ceph_connection *con, p = kmap(pages[con->in_msg_pos.page]); ret = ceph_tcp_recvmsg(con->sock, p + con->in_msg_pos.page_pos, left); - if (ret > 0 && datacrc) + if (ret > 0 && do_datacrc) con->in_data_crc = crc32c(con->in_data_crc, p + con->in_msg_pos.page_pos, ret); @@ -1590,7 +1590,7 @@ static int read_partial_message_pages(struct ceph_connection *con, #ifdef CONFIG_BLOCK static int read_partial_message_bio(struct ceph_connection *con, struct bio **bio_iter, int *bio_seg, - unsigned data_len, int datacrc) + unsigned data_len, bool do_datacrc) { struct bio_vec *bv = bio_iovec_idx(*bio_iter, *bio_seg); void *p; @@ -1606,7 +1606,7 @@ static int read_partial_message_bio(struct ceph_connection *con, ret = ceph_tcp_recvmsg(con->sock, p + con->in_msg_pos.page_pos, left); - if (ret > 0 && datacrc) + if (ret > 0 && do_datacrc) con->in_data_crc = crc32c(con->in_data_crc, p + con->in_msg_pos.page_pos, ret); @@ -1633,7 +1633,7 @@ static int read_partial_message(struct ceph_connection *con) int ret; int to, left; unsigned front_len, middle_len, data_len; - int datacrc = con->msgr->nocrc; + bool do_datacrc = con->msgr->nocrc; int skip; u64 seq; @@ -1744,7 +1744,7 @@ static int read_partial_message(struct ceph_connection *con) while (con->in_msg_pos.data_pos < data_len) { if (m->pages) { ret = read_partial_message_pages(con, m->pages, - data_len, datacrc); + data_len, do_datacrc); if (ret <= 0) return ret; #ifdef CONFIG_BLOCK @@ -1752,7 +1752,7 @@ static int read_partial_message(struct ceph_connection *con) ret = read_partial_message_bio(con, &m->bio_iter, &m->bio_seg, - data_len, datacrc); + data_len, do_datacrc); if (ret <= 0) return ret; #endif @@ -1787,7 +1787,7 @@ static int read_partial_message(struct ceph_connection *con) m, con->in_middle_crc, m->footer.middle_crc); return -EBADMSG; } - if (datacrc && + if (do_datacrc && (m->footer.flags & CEPH_MSG_FOOTER_NOCRC) == 0 && con->in_data_crc != le32_to_cpu(m->footer.data_crc)) { pr_err("read_partial_message %p data crc %u != exp. %u\n", m, -- cgit v1.2.3-70-g09d2 From 6b43ae8a619d17c4935c3320d2ef9e92bdeed05d Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 15 Mar 2012 13:04:03 -0700 Subject: ntp: Fix leap-second hrtimer livelock Since commit 7dffa3c673fbcf835cd7be80bb4aec8ad3f51168 the ntp subsystem has used an hrtimer for triggering the leapsecond adjustment. However, this can cause a potential livelock. Thomas diagnosed this as the following pattern: CPU 0 CPU 1 do_adjtimex() spin_lock_irq(&ntp_lock); process_adjtimex_modes(); timer_interrupt() process_adj_status(); do_timer() ntp_start_leap_timer(); write_lock(&xtime_lock); hrtimer_start(); update_wall_time(); hrtimer_reprogram(); ntp_tick_length() tick_program_event() spin_lock(&ntp_lock); clockevents_program_event() ktime_get() seq = req_seqbegin(xtime_lock); This patch tries to avoid the problem by reverting back to not using an hrtimer to inject leapseconds, and instead we handle the leapsecond processing in the second_overflow() function. The downside to this change is that on systems that support highres timers, the leap second processing will occur on a HZ tick boundary, (ie: ~1-10ms, depending on HZ) after the leap second instead of possibly sooner (~34us in my tests w/ x86_64 lapic). This patch applies on top of tip/timers/core. CC: Sasha Levin CC: Thomas Gleixner Reported-by: Sasha Levin Diagnoised-by: Thomas Gleixner Tested-by: Sasha Levin Signed-off-by: John Stultz --- include/linux/timex.h | 2 +- kernel/time/ntp.c | 128 +++++++++++++++------------------------------- kernel/time/timekeeping.c | 20 +++----- 3 files changed, 48 insertions(+), 102 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index b75e1864ed1..99bc88b1fc0 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -252,7 +252,7 @@ extern void ntp_clear(void); /* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */ extern u64 ntp_tick_length(void); -extern void second_overflow(void); +extern int second_overflow(unsigned long secs); extern int do_adjtimex(struct timex *); extern void hardpps(const struct timespec *, const struct timespec *); diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 6e039b144da..3d17ebd47fa 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -34,8 +34,6 @@ unsigned long tick_nsec; static u64 tick_length; static u64 tick_length_base; -static struct hrtimer leap_timer; - #define MAX_TICKADJ 500LL /* usecs */ #define MAX_TICKADJ_SCALED \ (((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ) @@ -381,70 +379,63 @@ u64 ntp_tick_length(void) /* - * Leap second processing. If in leap-insert state at the end of the - * day, the system clock is set back one second; if in leap-delete - * state, the system clock is set ahead one second. + * this routine handles the overflow of the microsecond field + * + * The tricky bits of code to handle the accurate clock support + * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. + * They were originally developed for SUN and DEC kernels. + * All the kudos should go to Dave for this stuff. + * + * Also handles leap second processing, and returns leap offset */ -static enum hrtimer_restart ntp_leap_second(struct hrtimer *timer) +int second_overflow(unsigned long secs) { - enum hrtimer_restart res = HRTIMER_NORESTART; - unsigned long flags; + s64 delta; int leap = 0; + unsigned long flags; spin_lock_irqsave(&ntp_lock, flags); + + /* + * Leap second processing. If in leap-insert state at the end of the + * day, the system clock is set back one second; if in leap-delete + * state, the system clock is set ahead one second. + */ switch (time_state) { case TIME_OK: + if (time_status & STA_INS) + time_state = TIME_INS; + else if (time_status & STA_DEL) + time_state = TIME_DEL; break; case TIME_INS: - leap = -1; - time_state = TIME_OOP; - printk(KERN_NOTICE - "Clock: inserting leap second 23:59:60 UTC\n"); - hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC); - res = HRTIMER_RESTART; + if (secs % 86400 == 0) { + leap = -1; + time_state = TIME_OOP; + printk(KERN_NOTICE + "Clock: inserting leap second 23:59:60 UTC\n"); + } break; case TIME_DEL: - leap = 1; - time_tai--; - time_state = TIME_WAIT; - printk(KERN_NOTICE - "Clock: deleting leap second 23:59:59 UTC\n"); + if ((secs + 1) % 86400 == 0) { + leap = 1; + time_tai--; + time_state = TIME_WAIT; + printk(KERN_NOTICE + "Clock: deleting leap second 23:59:59 UTC\n"); + } break; case TIME_OOP: time_tai++; time_state = TIME_WAIT; - /* fall through */ + break; + case TIME_WAIT: if (!(time_status & (STA_INS | STA_DEL))) time_state = TIME_OK; break; } - spin_unlock_irqrestore(&ntp_lock, flags); - - /* - * We have to call this outside of the ntp_lock to keep - * the proper locking hierarchy - */ - if (leap) - timekeeping_leap_insert(leap); - - return res; -} - -/* - * this routine handles the overflow of the microsecond field - * - * The tricky bits of code to handle the accurate clock support - * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. - * They were originally developed for SUN and DEC kernels. - * All the kudos should go to Dave for this stuff. - */ -void second_overflow(void) -{ - s64 delta; - unsigned long flags; - spin_lock_irqsave(&ntp_lock, flags); /* Bump the maxerror field */ time_maxerror += MAXFREQ / NSEC_PER_USEC; @@ -481,8 +472,13 @@ void second_overflow(void) tick_length += (s64)(time_adjust * NSEC_PER_USEC / NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT; time_adjust = 0; + + + out: spin_unlock_irqrestore(&ntp_lock, flags); + + return leap; } #ifdef CONFIG_GENERIC_CMOS_UPDATE @@ -544,27 +540,6 @@ static void notify_cmos_timer(void) static inline void notify_cmos_timer(void) { } #endif -/* - * Start the leap seconds timer: - */ -static inline void ntp_start_leap_timer(struct timespec *ts) -{ - long now = ts->tv_sec; - - if (time_status & STA_INS) { - time_state = TIME_INS; - now += 86400 - now % 86400; - hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS); - - return; - } - - if (time_status & STA_DEL) { - time_state = TIME_DEL; - now += 86400 - (now + 1) % 86400; - hrtimer_start(&leap_timer, ktime_set(now, 0), HRTIMER_MODE_ABS); - } -} /* * Propagate a new txc->status value into the NTP state: @@ -589,22 +564,6 @@ static inline void process_adj_status(struct timex *txc, struct timespec *ts) time_status &= STA_RONLY; time_status |= txc->status & ~STA_RONLY; - switch (time_state) { - case TIME_OK: - ntp_start_leap_timer(ts); - break; - case TIME_INS: - case TIME_DEL: - time_state = TIME_OK; - ntp_start_leap_timer(ts); - case TIME_WAIT: - if (!(time_status & (STA_INS | STA_DEL))) - time_state = TIME_OK; - break; - case TIME_OOP: - hrtimer_restart(&leap_timer); - break; - } } /* * Called with the xtime lock held, so we can access and modify @@ -686,9 +645,6 @@ int do_adjtimex(struct timex *txc) (txc->tick < 900000/USER_HZ || txc->tick > 1100000/USER_HZ)) return -EINVAL; - - if (txc->modes & ADJ_STATUS && time_state != TIME_OK) - hrtimer_cancel(&leap_timer); } if (txc->modes & ADJ_SETOFFSET) { @@ -1010,6 +966,4 @@ __setup("ntp_tick_adj=", ntp_tick_adj_setup); void __init ntp_init(void) { ntp_clear(); - hrtimer_init(&leap_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); - leap_timer.function = ntp_leap_second; } diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index b53da5ecbea..5d76e09ddd3 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -184,18 +184,6 @@ static void timekeeping_update(bool clearntp) } -void timekeeping_leap_insert(int leapsecond) -{ - unsigned long flags; - - write_seqlock_irqsave(&timekeeper.lock, flags); - timekeeper.xtime.tv_sec += leapsecond; - timekeeper.wall_to_monotonic.tv_sec -= leapsecond; - timekeeping_update(false); - write_sequnlock_irqrestore(&timekeeper.lock, flags); - -} - /** * timekeeping_forward_now - update clock to the current time * @@ -969,9 +957,11 @@ static cycle_t logarithmic_accumulation(cycle_t offset, int shift) timekeeper.xtime_nsec += timekeeper.xtime_interval << shift; while (timekeeper.xtime_nsec >= nsecps) { + int leap; timekeeper.xtime_nsec -= nsecps; timekeeper.xtime.tv_sec++; - second_overflow(); + leap = second_overflow(timekeeper.xtime.tv_sec); + timekeeper.xtime.tv_sec += leap; } /* Accumulate raw time */ @@ -1082,9 +1072,11 @@ static void update_wall_time(void) * xtime.tv_nsec isn't larger then NSEC_PER_SEC */ if (unlikely(timekeeper.xtime.tv_nsec >= NSEC_PER_SEC)) { + int leap; timekeeper.xtime.tv_nsec -= NSEC_PER_SEC; timekeeper.xtime.tv_sec++; - second_overflow(); + leap = second_overflow(timekeeper.xtime.tv_sec); + timekeeper.xtime.tv_sec += leap; } timekeeping_update(false); -- cgit v1.2.3-70-g09d2 From c7206205d00ab375839bd6c7ddb247d600693c09 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 22 Mar 2012 17:26:36 +0100 Subject: perf: Fix mmap_page capabilities and docs Complete the syscall-less self-profiling feature and address all complaints, namely: - capabilities, so we can detect what is actually available at runtime Add a capabilities field to perf_event_mmap_page to indicate what is actually available for use. - on x86: RDPMC weirdness due to being 40/48 bits and not sign-extending properly. - ABI documentation as to how all this stuff works. Also improve the documentation for the new features. Signed-off-by: Peter Zijlstra Cc: Stephane Eranian Cc: Vince Weaver Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1332433596.2487.33.camel@twins Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 10 ++++- include/linux/perf_event.h | 83 +++++++++++++++++++++++++++++++++++----- kernel/events/core.c | 4 +- 3 files changed, 84 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 453ac949757..4ef8104958e 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1622,6 +1622,9 @@ static int x86_pmu_event_idx(struct perf_event *event) { int idx = event->hw.idx; + if (!x86_pmu.attr_rdpmc) + return 0; + if (x86_pmu.num_counters_fixed && idx >= X86_PMC_IDX_FIXED) { idx -= X86_PMC_IDX_FIXED; idx |= 1 << 30; @@ -1706,14 +1709,19 @@ static struct pmu pmu = { .flush_branch_stack = x86_pmu_flush_branch_stack, }; -void perf_update_user_clock(struct perf_event_mmap_page *userpg, u64 now) +void arch_perf_update_userpage(struct perf_event_mmap_page *userpg, u64 now) { + userpg->cap_usr_time = 0; + userpg->cap_usr_rdpmc = x86_pmu.attr_rdpmc; + userpg->pmc_width = x86_pmu.cntval_bits; + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) return; if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) return; + userpg->cap_usr_time = 1; userpg->time_mult = this_cpu_read(cyc2ns); userpg->time_shift = CYC2NS_SCALE_FACTOR; userpg->time_offset = this_cpu_read(cyc2ns_offset) - now; diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 57ae485e80f..ca9ed4e6a28 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -299,18 +299,31 @@ struct perf_event_mmap_page { /* * Bits needed to read the hw events in user-space. * - * u32 seq; - * s64 count; + * u32 seq, time_mult, time_shift, idx, width; + * u64 count, enabled, running; + * u64 cyc, time_offset; + * s64 pmc = 0; * * do { * seq = pc->lock; - * * barrier() - * if (pc->index) { - * count = pmc_read(pc->index - 1); - * count += pc->offset; - * } else - * goto regular_read; + * + * enabled = pc->time_enabled; + * running = pc->time_running; + * + * if (pc->cap_usr_time && enabled != running) { + * cyc = rdtsc(); + * time_offset = pc->time_offset; + * time_mult = pc->time_mult; + * time_shift = pc->time_shift; + * } + * + * idx = pc->index; + * count = pc->offset; + * if (pc->cap_usr_rdpmc && idx) { + * width = pc->pmc_width; + * pmc = rdpmc(idx - 1); + * } * * barrier(); * } while (pc->lock != seq); @@ -323,14 +336,57 @@ struct perf_event_mmap_page { __s64 offset; /* add to hardware event value */ __u64 time_enabled; /* time event active */ __u64 time_running; /* time event on cpu */ - __u32 time_mult, time_shift; + union { + __u64 capabilities; + __u64 cap_usr_time : 1, + cap_usr_rdpmc : 1, + cap_____res : 62; + }; + + /* + * If cap_usr_rdpmc this field provides the bit-width of the value + * read using the rdpmc() or equivalent instruction. This can be used + * to sign extend the result like: + * + * pmc <<= 64 - width; + * pmc >>= 64 - width; // signed shift right + * count += pmc; + */ + __u16 pmc_width; + + /* + * If cap_usr_time the below fields can be used to compute the time + * delta since time_enabled (in ns) using rdtsc or similar. + * + * u64 quot, rem; + * u64 delta; + * + * quot = (cyc >> time_shift); + * rem = cyc & ((1 << time_shift) - 1); + * delta = time_offset + quot * time_mult + + * ((rem * time_mult) >> time_shift); + * + * Where time_offset,time_mult,time_shift and cyc are read in the + * seqcount loop described above. This delta can then be added to + * enabled and possible running (if idx), improving the scaling: + * + * enabled += delta; + * if (idx) + * running += delta; + * + * quot = count / running; + * rem = count % running; + * count = quot * enabled + (rem * enabled) / running; + */ + __u16 time_shift; + __u32 time_mult; __u64 time_offset; /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[121]; /* align to 1k */ + __u64 __reserved[120]; /* align to 1k */ /* * Control data for the mmap() data buffer. @@ -347,6 +403,13 @@ struct perf_event_mmap_page { __u64 data_tail; /* user-space written tail */ }; +/* + * Build time assertion that we keep the data_head at the intended location. + * IOW, validation we got the __reserved[] size right. + */ +extern char __assert_mmap_data_head_offset + [1 - 2*!!(offsetof(struct perf_event_mmap_page, data_head) != 1024)]; + #define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) #define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) #define PERF_RECORD_MISC_KERNEL (1 << 0) diff --git a/kernel/events/core.c b/kernel/events/core.c index c61234b1a98..dc3b0527251 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3348,7 +3348,7 @@ static void calc_timer_values(struct perf_event *event, *running = ctx_time - event->tstamp_running; } -void __weak perf_update_user_clock(struct perf_event_mmap_page *userpg, u64 now) +void __weak arch_perf_update_userpage(struct perf_event_mmap_page *userpg, u64 now) { } @@ -3398,7 +3398,7 @@ void perf_event_update_userpage(struct perf_event *event) userpg->time_running = running + atomic64_read(&event->child_total_time_running); - perf_update_user_clock(userpg, now); + arch_perf_update_userpage(userpg, now); barrier(); ++userpg->lock; -- cgit v1.2.3-70-g09d2 From e335e3eb82dada2765297f6ba501afc7555aba10 Mon Sep 17 00:00:00 2001 From: Raghavendra K T Date: Thu, 22 Mar 2012 15:25:08 +0530 Subject: locking/kconfig: Simplify INLINE_SPIN_UNLOCK usage Get rid of INLINE_SPIN_UNLOCK entirely replacing it with UNINLINE_SPIN_UNLOCK instead of the reverse meaning. Whoever wants to change the default spinlock inlining behavior and uninline the spinlocks for some weird reason, such as spinlock debugging, paravirt etc. can now all just select UNINLINE_SPIN_UNLOCK Original discussion at: https://lkml.org/lkml/2012/3/21/357 Suggested-by: Linus Torvalds Signed-off-by: Raghavendra K T Cc: Linus Torvalds Cc: Ralf Baechle Cc: Chris Metcalf Cc: Chris Zankel Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20120322095502.30866.75756.sendpatchset@codeblue [ tidied up the changelog a bit ] Signed-off-by: Ingo Molnar --- arch/mips/configs/db1300_defconfig | 2 +- arch/xtensa/configs/iss_defconfig | 2 +- include/linux/spinlock_api_smp.h | 2 +- kernel/Kconfig.locks | 4 ++-- kernel/Kconfig.preempt | 1 + kernel/spinlock.c | 2 +- lib/Kconfig.debug | 1 + 7 files changed, 8 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/arch/mips/configs/db1300_defconfig b/arch/mips/configs/db1300_defconfig index c38b190151c..3590ab5d979 100644 --- a/arch/mips/configs/db1300_defconfig +++ b/arch/mips/configs/db1300_defconfig @@ -133,7 +133,7 @@ CONFIG_BLK_DEV_BSG=y CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_UNINLINE_SPIN_UNLOCK is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index f932b30b47f..ddab37b2474 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -113,7 +113,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set -CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_UNINLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h index e253ccd7a60..51df117abe4 100644 --- a/include/linux/spinlock_api_smp.h +++ b/include/linux/spinlock_api_smp.h @@ -67,7 +67,7 @@ _raw_spin_unlock_irqrestore(raw_spinlock_t *lock, unsigned long flags) #define _raw_spin_trylock_bh(lock) __raw_spin_trylock_bh(lock) #endif -#ifdef CONFIG_INLINE_SPIN_UNLOCK +#ifndef CONFIG_UNINLINE_SPIN_UNLOCK #define _raw_spin_unlock(lock) __raw_spin_unlock(lock) #endif diff --git a/kernel/Kconfig.locks b/kernel/Kconfig.locks index 5068e2a4e75..2251882daf5 100644 --- a/kernel/Kconfig.locks +++ b/kernel/Kconfig.locks @@ -124,8 +124,8 @@ config INLINE_SPIN_LOCK_IRQSAVE def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \ ARCH_INLINE_SPIN_LOCK_IRQSAVE -config INLINE_SPIN_UNLOCK - def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_SPIN_UNLOCK) +config UNINLINE_SPIN_UNLOCK + bool config INLINE_SPIN_UNLOCK_BH def_bool !DEBUG_SPINLOCK && ARCH_INLINE_SPIN_UNLOCK_BH diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt index 24e7cb0ba26..3f9c97419f0 100644 --- a/kernel/Kconfig.preempt +++ b/kernel/Kconfig.preempt @@ -36,6 +36,7 @@ config PREEMPT_VOLUNTARY config PREEMPT bool "Preemptible Kernel (Low-Latency Desktop)" select PREEMPT_COUNT + select UNINLINE_SPIN_UNLOCK if !ARCH_INLINE_SPIN_UNLOCK help This option reduces the latency of the kernel by making all kernel code (that is not executing in a critical section) diff --git a/kernel/spinlock.c b/kernel/spinlock.c index 84c7d96918b..5cdd8065a3c 100644 --- a/kernel/spinlock.c +++ b/kernel/spinlock.c @@ -163,7 +163,7 @@ void __lockfunc _raw_spin_lock_bh(raw_spinlock_t *lock) EXPORT_SYMBOL(_raw_spin_lock_bh); #endif -#ifndef CONFIG_INLINE_SPIN_UNLOCK +#ifdef CONFIG_UNINLINE_SPIN_UNLOCK void __lockfunc _raw_spin_unlock(raw_spinlock_t *lock) { __raw_spin_unlock(lock); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 05037dc9bde..f32a41f2a82 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -499,6 +499,7 @@ config RT_MUTEX_TESTER config DEBUG_SPINLOCK bool "Spinlock and rw-lock debugging: basic checks" depends on DEBUG_KERNEL + select UNINLINE_SPIN_UNLOCK help Say Y here and build SMP to catch missing spinlock initialization and certain other kinds of spinlock errors commonly made. This is -- cgit v1.2.3-70-g09d2 From 335dd85895abeca1957d5eaa3013dfe8dc60c7d7 Mon Sep 17 00:00:00 2001 From: Cesar Eduardo Barros Date: Sat, 11 Feb 2012 17:54:59 -0200 Subject: time: remove no_sync_cmos_clock Commit 9863c90f682fba34cdc26c3437e8c00da6c83fa4 (x86, vmware: Remove deprecated VMI kernel support) removed the only place which set no_sync_cmos_clock. Since that commit, this variable is never set. Signed-off-by: Cesar Eduardo Barros Signed-off-by: John Stultz --- include/linux/time.h | 1 - kernel/time/ntp.c | 6 +----- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index b3061782dec..97734e9409c 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -116,7 +116,6 @@ static inline struct timespec timespec_sub(struct timespec lhs, extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); extern int update_persistent_clock(struct timespec now); -extern int no_sync_cmos_clock __read_mostly; void timekeeping_init(void); extern int timekeeping_suspended; diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 3d17ebd47fa..f03fd83b170 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -483,9 +483,6 @@ out: #ifdef CONFIG_GENERIC_CMOS_UPDATE -/* Disable the cmos update - used by virtualization and embedded */ -int no_sync_cmos_clock __read_mostly; - static void sync_cmos_clock(struct work_struct *work); static DECLARE_DELAYED_WORK(sync_cmos_work, sync_cmos_clock); @@ -532,8 +529,7 @@ static void sync_cmos_clock(struct work_struct *work) static void notify_cmos_timer(void) { - if (!no_sync_cmos_clock) - schedule_delayed_work(&sync_cmos_work, 0); + schedule_delayed_work(&sync_cmos_work, 0); } #else -- cgit v1.2.3-70-g09d2 From b01c3a0010aabadf745f3e7fdb9cab682e0a28a2 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Mar 2012 15:41:20 +0100 Subject: perf: Move mmap page data_head offset assertion out of header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Having the build time assertion in header is making the perf build fail on x86 with: ../../include/linux/perf_event.h:411:32: error: variably modified \ ‘__assert_mmap_data_head_offset’ at file scope [-Werror] I'm moving the build time validation out of the header, because I think it's better than to lessen the perf build warn/error check. Signed-off-by: Jiri Olsa Cc: acme@redhat.com Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: cjashfor@linux.vnet.ibm.com Cc: fweisbec@gmail.com Link: http://lkml.kernel.org/r/1332513680-7870-1-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 7 ------- kernel/events/core.c | 7 +++++++ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index ca9ed4e6a28..ddbb6a901f6 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -403,13 +403,6 @@ struct perf_event_mmap_page { __u64 data_tail; /* user-space written tail */ }; -/* - * Build time assertion that we keep the data_head at the intended location. - * IOW, validation we got the __reserved[] size right. - */ -extern char __assert_mmap_data_head_offset - [1 - 2*!!(offsetof(struct perf_event_mmap_page, data_head) != 1024)]; - #define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) #define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) #define PERF_RECORD_MISC_KERNEL (1 << 0) diff --git a/kernel/events/core.c b/kernel/events/core.c index dc3b0527251..3f92a19aa11 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7116,6 +7116,13 @@ void __init perf_event_init(void) /* do not patch jump label more than once per second */ jump_label_rate_limit(&perf_sched_events, HZ); + + /* + * Build time assertion that we keep the data_head at the intended + * location. IOW, validation we got the __reserved[] size right. + */ + BUILD_BUG_ON((offsetof(struct perf_event_mmap_page, data_head)) + != 1024); } static int __init perf_event_sysfs_init(void) -- cgit v1.2.3-70-g09d2 From 58af4a244fa9f7ef86f45aa9f8fa835a89274bdd Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 20 Mar 2012 14:33:01 -0500 Subject: ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol The only users of ARCH_HAS_DMA_SET_COHERENT_MASK are 2 ARM platforms: ixp4xx and pxa cm_x2xx. We've been getting lucky that the define is implicitly included before dma-mapping.h, but the removal of io.h broke things (c334bc1 ARM: make mach/io.h include optional). Since memory.h is the correct place, but no longer exists, convert the define to a kconfig entry. Reported-by: Paul Gortmaker Signed-off-by: Rob Herring Acked-by: Nicolas Pitre Cc: Russell King Cc: Imre Kaloz Cc: Krzysztof Halasa Cc: Eric Miao Acked-by: Haojian Zhuang Cc: Vinod Koul Cc: Dan Williams --- arch/arm/Kconfig | 4 ++++ arch/arm/mach-ixp4xx/include/mach/hardware.h | 2 -- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/mach-pxa/include/mach/hardware.h | 4 ---- include/linux/dma-mapping.h | 2 +- 5 files changed, 6 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 31a2ddc2e48..d3999a5f1c7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -180,6 +180,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config ARCH_HAS_DMA_SET_COHERENT_MASK + bool + config GENERIC_ISA_DMA bool @@ -547,6 +550,7 @@ config ARCH_IXP2000 config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU + select ARCH_HAS_DMA_SET_COHERENT_MASK select CLKSRC_MMIO select CPU_XSCALE select GENERIC_GPIO diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h index c30e7e923a7..034bb2a1b80 100644 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -23,8 +23,6 @@ #define PCIBIOS_MAX_MEM 0x4BFFFFFF #endif -#define ARCH_HAS_DMA_SET_COHERENT_MASK - /* Register locations and bits */ #include "ixp4xx-regs.h" diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 61d3c72ded8..109ccd2a888 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -108,6 +108,7 @@ config CSB726_CSB701 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" + select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select PXA27x select IWMMXT select PXA25x diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 8184669dde2..54b64eae353 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -337,8 +337,4 @@ extern unsigned int get_memclk_frequency_10khz(void); extern unsigned long get_clock_tick_rate(void); #endif -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define ARCH_HAS_DMA_SET_COHERENT_MASK -#endif - #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index e13117cbd2f..5a736af3cc7 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -77,7 +77,7 @@ static inline u64 dma_get_mask(struct device *dev) return DMA_BIT_MASK(32); } -#ifdef ARCH_HAS_DMA_SET_COHERENT_MASK +#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK int dma_set_coherent_mask(struct device *dev, u64 mask); #else static inline int dma_set_coherent_mask(struct device *dev, u64 mask) -- cgit v1.2.3-70-g09d2 From 4265900e0be653f5b78baf2816857ef57cf1332f Mon Sep 17 00:00:00 2001 From: Saugata Das Date: Wed, 21 Dec 2011 13:09:17 +0530 Subject: mmc: MMC-4.5 Data Tag Support MMC-4.5 data tag feature will be used to store the file system meta-data in the tagged region of eMMC. This will improve the write and subsequent read transfer time for the meta data. Signed-off-by: Saugata Das Tested-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 21 ++++++++++++++++----- drivers/mmc/core/mmc.c | 14 ++++++++++++++ include/linux/mmc/card.h | 2 ++ include/linux/mmc/mmc.h | 3 +++ 4 files changed, 35 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e5a3c7b6ded..f2020d37c65 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1080,6 +1080,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct mmc_blk_request *brq = &mqrq->brq; struct request *req = mqrq->req; struct mmc_blk_data *md = mq->data; + bool do_data_tag; /* * Reliable writes are used to implement Forced Unit Access and @@ -1155,6 +1156,16 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, if (do_rel_wr) mmc_apply_rel_rw(brq, card, req); + /* + * Data tag is used only during writing meta data to speed + * up write and any subsequent read of this meta data + */ + do_data_tag = (card->ext_csd.data_tag_unit_size) && + (req->cmd_flags & REQ_META) && + (rq_data_dir(req) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + /* * Pre-defined multi-block transfers are preferable to * open ended-ones (and necessary for reliable writes). @@ -1173,13 +1184,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, * We'll avoid using CMD23-bounded multiblock writes for * these, while retaining features like reliable writes. */ - - if ((md->flags & MMC_BLK_CMD23) && - mmc_op_multi(brq->cmd.opcode) && - (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) { + if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || + do_data_tag)) { brq->sbc.opcode = MMC_SET_BLOCK_COUNT; brq->sbc.arg = brq->data.blocks | - (do_rel_wr ? (1 << 31) : 0); + (do_rel_wr ? (1 << 31) : 0) | + (do_data_tag ? (1 << 29) : 0); brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; brq->mrq.sbc = &brq->sbc; } diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2b9ed1401dc..6defddd795f 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -519,6 +519,20 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } } out: diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 19a41d1737a..1a1ca716983 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -71,6 +71,8 @@ struct mmc_ext_csd { bool hpi_en; /* HPI enablebit */ bool hpi; /* HPI support bit */ unsigned int hpi_cmd; /* cmd used as HPI */ + unsigned int data_sector_size; /* 512 bytes or 4KB */ + unsigned int data_tag_unit_size; /* DATA TAG UNIT size */ unsigned int boot_ro_lock; /* ro lock support */ bool boot_ro_lockable; u8 raw_partition_support; /* 160 */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index fb9f6e116e1..b822a2cb600 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -274,6 +274,7 @@ struct _mmc_csd { #define EXT_CSD_FLUSH_CACHE 32 /* W */ #define EXT_CSD_CACHE_CTRL 33 /* R/W */ #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ +#define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ @@ -315,6 +316,8 @@ struct _mmc_csd { #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */ +#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */ #define EXT_CSD_HPI_FEATURES 503 /* RO */ /* -- cgit v1.2.3-70-g09d2 From 62ca8034d940439490a450ae7e2b7702591e3192 Mon Sep 17 00:00:00 2001 From: Shashidhar Hiremath Date: Fri, 13 Jan 2012 16:04:57 +0530 Subject: mmc: Support of PCI mode in the dw_mmc driver Support of PCI mode for the dw_mmc driver. This Patch adds the support for the scenario where the Synopsys Designware IP is present on the PCI bus. The patch adds the minimal modifications necessary for the driver to work on PCI platform. Also added separate files for PCI and PLATFORM modes of operation. Signed-off-by: Shashidhar Hiremath Acked-by: James Hogan Signed-off-by: Chris Ball --- drivers/mmc/host/Kconfig | 25 +++++++ drivers/mmc/host/Makefile | 2 + drivers/mmc/host/dw_mmc-pci.c | 158 ++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc-pltfm.c | 134 ++++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc.c | 155 ++++++++++++++------------------------- drivers/mmc/host/dw_mmc.h | 7 ++ include/linux/mmc/dw_mmc.h | 8 +- 7 files changed, 385 insertions(+), 104 deletions(-) create mode 100644 drivers/mmc/host/dw_mmc-pci.c create mode 100644 drivers/mmc/host/dw_mmc-pltfm.c (limited to 'include/linux') diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 00fcbed1afd..0c9b3b12652 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -533,6 +533,31 @@ config MMC_DW_IDMAC Designware Mobile Storage IP block. This disables the external DMA interface. +config MMC_DW_PLTFM + tristate "Synopsys Designware MCI Support as platform device" + depends on MMC_DW + default y + help + This selects the common helper functions support for Host Controller + Interface based platform driver. Please select this option if the IP + is present as a platform device. This is the common interface for the + Synopsys Designware IP. + + If you have a controller with this interface, say Y or M here. + + If unsure, say Y. + +config MMC_DW_PCI + tristate "Synopsys Designware MCI support on PCI bus" + depends on MMC_DW && PCI + help + This selects the PCI bus for the Synopsys Designware Mobile Storage IP. + Select this option if the IP is present on PCI platform. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE) diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 745f8fce251..3e7e26d0807 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -39,6 +39,8 @@ obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_DW) += dw_mmc.o +obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o +obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c new file mode 100644 index 00000000000..dc0d25a013e --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pci.c @@ -0,0 +1,158 @@ +/* + * Synopsys DesignWare Multimedia Card PCI Interface driver + * + * Copyright (C) 2012 Vayavya Labs Pvt. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "dw_mmc.h" + +#define PCI_BAR_NO 2 +#define COMPLETE_BAR 0 +#define SYNOPSYS_DW_MCI_VENDOR_ID 0x700 +#define SYNOPSYS_DW_MCI_DEVICE_ID 0x1107 +/* Defining the Capabilities */ +#define DW_MCI_CAPABILITIES (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED |\ + MMC_CAP_SD_HIGHSPEED | MMC_CAP_8_BIT_DATA |\ + MMC_CAP_SDIO_IRQ) + +static struct dw_mci_board pci_board_data = { + .num_slots = 1, + .caps = DW_MCI_CAPABILITIES, + .bus_hz = 33 * 1000 * 1000, + .detect_delay_ms = 200, + .fifo_depth = 32, +}; + +static int __devinit dw_mci_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *entries) +{ + struct dw_mci *host; + int ret; + + ret = pci_enable_device(pdev); + if (ret) + return ret; + if (pci_request_regions(pdev, "dw_mmc_pci")) { + ret = -ENODEV; + goto err_disable_dev; + } + + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); + if (!host) { + ret = -ENOMEM; + goto err_release; + } + + host->irq = pdev->irq; + host->irq_flags = IRQF_SHARED; + host->dev = pdev->dev; + host->pdata = &pci_board_data; + + host->regs = pci_iomap(pdev, PCI_BAR_NO, COMPLETE_BAR); + if (!host->regs) { + ret = -EIO; + goto err_unmap; + } + + pci_set_drvdata(pdev, host); + ret = dw_mci_probe(host); + if (ret) + goto err_probe_failed; + return ret; + +err_probe_failed: + pci_iounmap(pdev, host->regs); +err_unmap: + kfree(host); +err_release: + pci_release_regions(pdev); +err_disable_dev: + pci_disable_device(pdev); + return ret; +} + +static void __devexit dw_mci_pci_remove(struct pci_dev *pdev) +{ + struct dw_mci *host = pci_get_drvdata(pdev); + + dw_mci_remove(host); + pci_set_drvdata(pdev, NULL); + pci_release_regions(pdev); + pci_iounmap(pdev, host->regs); + kfree(host); + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM_SLEEP +static int dw_mci_pci_suspend(struct device *dev) +{ + int ret; + struct pci_dev *pdev = to_pci_dev(dev); + struct dw_mci *host = pci_get_drvdata(pdev); + + ret = dw_mci_suspend(host); + return ret; +} + +static int dw_mci_pci_resume(struct device *dev) +{ + int ret; + struct pci_dev *pdev = to_pci_dev(dev); + struct dw_mci *host = pci_get_drvdata(pdev); + + ret = dw_mci_resume(host); + return ret; +} +#else +#define dw_mci_pci_suspend NULL +#define dw_mci_pci_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_pci_pmops, dw_mci_pci_suspend, dw_mci_pci_resume); + +static DEFINE_PCI_DEVICE_TABLE(dw_mci_pci_id) = { + { PCI_DEVICE(SYNOPSYS_DW_MCI_VENDOR_ID, SYNOPSYS_DW_MCI_DEVICE_ID) }, + {} +}; +MODULE_DEVICE_TABLE(pci, dw_mci_pci_id); + +static struct pci_driver dw_mci_pci_driver = { + .name = "dw_mmc_pci", + .id_table = dw_mci_pci_id, + .probe = dw_mci_pci_probe, + .remove = dw_mci_pci_remove, + .driver = { + .pm = &dw_mci_pci_pmops + }, +}; + +static int __init dw_mci_init(void) +{ + return pci_register_driver(&dw_mci_pci_driver); +} + +static void __exit dw_mci_exit(void) +{ + pci_unregister_driver(&dw_mci_pci_driver); +} + +module_init(dw_mci_init); +module_exit(dw_mci_exit); + +MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver"); +MODULE_AUTHOR("Shashidhar Hiremath "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c new file mode 100644 index 00000000000..92ec3eb3aae --- /dev/null +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -0,0 +1,134 @@ +/* + * Synopsys DesignWare Multimedia Card Interface driver + * + * Copyright (C) 2009 NXP Semiconductors + * Copyright (C) 2009, 2010 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "dw_mmc.h" + +static int dw_mci_pltfm_probe(struct platform_device *pdev) +{ + struct dw_mci *host; + struct resource *regs; + int ret; + + host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); + if (!host) + return -ENOMEM; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + ret = -ENXIO; + goto err_free; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq < 0) { + ret = host->irq; + goto err_free; + } + + host->dev = pdev->dev; + host->irq_flags = 0; + host->pdata = pdev->dev.platform_data; + ret = -ENOMEM; + host->regs = ioremap(regs->start, resource_size(regs)); + if (!host->regs) + goto err_free; + platform_set_drvdata(pdev, host); + ret = dw_mci_probe(host); + if (ret) + goto err_out; + return ret; +err_out: + iounmap(host->regs); +err_free: + kfree(host); + return ret; +} + +static int __exit dw_mci_pltfm_remove(struct platform_device *pdev) +{ + struct dw_mci *host = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + dw_mci_remove(host); + iounmap(host->regs); + kfree(host); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +/* + * TODO: we should probably disable the clock to the card in the suspend path. + */ +static int dw_mci_pltfm_suspend(struct device *dev) +{ + int ret; + struct dw_mci *host = dev_get_drvdata(dev); + + ret = dw_mci_suspend(host); + if (ret) + return ret; + + return 0; +} + +static int dw_mci_pltfm_resume(struct device *dev) +{ + int ret; + struct dw_mci *host = dev_get_drvdata(dev); + + ret = dw_mci_resume(host); + if (ret) + return ret; + + return 0; +} +#else +#define dw_mci_pltfm_suspend NULL +#define dw_mci_pltfm_resume NULL +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume); + +static struct platform_driver dw_mci_pltfm_driver = { + .remove = __exit_p(dw_mci_pltfm_remove), + .driver = { + .name = "dw_mmc", + .pm = &dw_mci_pltfm_pmops, + }, +}; + +static int __init dw_mci_init(void) +{ + return platform_driver_probe(&dw_mci_pltfm_driver, dw_mci_pltfm_probe); +} + +static void __exit dw_mci_exit(void) +{ + platform_driver_unregister(&dw_mci_pltfm_driver); +} + +module_init(dw_mci_init); +module_exit(dw_mci_exit); + +MODULE_DESCRIPTION("DW Multimedia Card Interface driver"); +MODULE_AUTHOR("NXP Semiconductor VietNam"); +MODULE_AUTHOR("Imagination Technologies Ltd"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 1dfcdef452b..987a2654971 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -268,7 +268,7 @@ static void dw_mci_start_command(struct dw_mci *host, struct mmc_command *cmd, u32 cmd_flags) { host->cmd = cmd; - dev_vdbg(&host->pdev->dev, + dev_vdbg(&host->dev, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); @@ -301,7 +301,7 @@ static void dw_mci_dma_cleanup(struct dw_mci *host) struct mmc_data *data = host->data; if (data) - dma_unmap_sg(&host->pdev->dev, data->sg, data->sg_len, + dma_unmap_sg(&host->dev, data->sg, data->sg_len, ((data->flags & MMC_DATA_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); } @@ -326,7 +326,7 @@ static void dw_mci_idmac_complete_dma(struct dw_mci *host) { struct mmc_data *data = host->data; - dev_vdbg(&host->pdev->dev, "DMA complete\n"); + dev_vdbg(&host->dev, "DMA complete\n"); host->dma_ops->cleanup(host); @@ -462,10 +462,10 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) else direction = DMA_TO_DEVICE; - sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, + sg_len = dma_map_sg(&host->dev, data->sg, data->sg_len, direction); - dev_vdbg(&host->pdev->dev, + dev_vdbg(&host->dev, "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, sg_len); @@ -821,12 +821,12 @@ static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) slot = list_entry(host->queue.next, struct dw_mci_slot, queue_node); list_del(&slot->queue_node); - dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", + dev_vdbg(&host->dev, "list not empty: %s is next\n", mmc_hostname(slot->mmc)); host->state = STATE_SENDING_CMD; dw_mci_start_request(host, slot); } else { - dev_vdbg(&host->pdev->dev, "list empty\n"); + dev_vdbg(&host->dev, "list empty\n"); host->state = STATE_IDLE; } @@ -965,7 +965,7 @@ static void dw_mci_tasklet_func(unsigned long priv) data->bytes_xfered = 0; data->error = -ETIMEDOUT; } else { - dev_err(&host->pdev->dev, + dev_err(&host->dev, "data FIFO error " "(status=%08x)\n", status); @@ -1682,7 +1682,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) struct mmc_host *mmc; struct dw_mci_slot *slot; - mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->pdev->dev); + mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->dev); if (!mmc) return -ENOMEM; @@ -1794,10 +1794,10 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) static void dw_mci_init_dma(struct dw_mci *host) { /* Alloc memory for sg translation */ - host->sg_cpu = dma_alloc_coherent(&host->pdev->dev, PAGE_SIZE, + host->sg_cpu = dma_alloc_coherent(&host->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); if (!host->sg_cpu) { - dev_err(&host->pdev->dev, "%s: could not alloc DMA memory\n", + dev_err(&host->dev, "%s: could not alloc DMA memory\n", __func__); goto no_dma; } @@ -1805,7 +1805,7 @@ static void dw_mci_init_dma(struct dw_mci *host) /* Determine which DMA interface to use */ #ifdef CONFIG_MMC_DW_IDMAC host->dma_ops = &dw_mci_idmac_ops; - dev_info(&host->pdev->dev, "Using internal DMA controller.\n"); + dev_info(&host->dev, "Using internal DMA controller.\n"); #endif if (!host->dma_ops) @@ -1813,12 +1813,12 @@ static void dw_mci_init_dma(struct dw_mci *host) if (host->dma_ops->init) { if (host->dma_ops->init(host)) { - dev_err(&host->pdev->dev, "%s: Unable to initialize " + dev_err(&host->dev, "%s: Unable to initialize " "DMA Controller.\n", __func__); goto no_dma; } } else { - dev_err(&host->pdev->dev, "DMA initialization not found.\n"); + dev_err(&host->dev, "DMA initialization not found.\n"); goto no_dma; } @@ -1826,7 +1826,7 @@ static void dw_mci_init_dma(struct dw_mci *host) return; no_dma: - dev_info(&host->pdev->dev, "Using PIO mode.\n"); + dev_info(&host->dev, "Using PIO mode.\n"); host->use_dma = 0; return; } @@ -1852,61 +1852,37 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) return false; } -static int dw_mci_probe(struct platform_device *pdev) +int dw_mci_probe(struct dw_mci *host) { - struct dw_mci *host; - struct resource *regs; - struct dw_mci_board *pdata; - int irq, ret, i, width; + int width, i, ret = 0; u32 fifo_size; - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) - return -ENXIO; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL); - if (!host) - return -ENOMEM; - - host->pdev = pdev; - host->pdata = pdata = pdev->dev.platform_data; - if (!pdata || !pdata->init) { - dev_err(&pdev->dev, + if (!host->pdata || !host->pdata->init) { + dev_err(&host->dev, "Platform data must supply init function\n"); - ret = -ENODEV; - goto err_freehost; + return -ENODEV; } - if (!pdata->select_slot && pdata->num_slots > 1) { - dev_err(&pdev->dev, + if (!host->pdata->select_slot && host->pdata->num_slots > 1) { + dev_err(&host->dev, "Platform data must supply select_slot function\n"); - ret = -ENODEV; - goto err_freehost; + return -ENODEV; } - if (!pdata->bus_hz) { - dev_err(&pdev->dev, + if (!host->pdata->bus_hz) { + dev_err(&host->dev, "Platform data must supply bus speed\n"); - ret = -ENODEV; - goto err_freehost; + return -ENODEV; } - host->bus_hz = pdata->bus_hz; - host->quirks = pdata->quirks; + host->bus_hz = host->pdata->bus_hz; + host->quirks = host->pdata->quirks; spin_lock_init(&host->lock); INIT_LIST_HEAD(&host->queue); - ret = -ENOMEM; - host->regs = ioremap(regs->start, resource_size(regs)); - if (!host->regs) - goto err_freehost; - host->dma_ops = pdata->dma_ops; + host->dma_ops = host->pdata->dma_ops; dw_mci_init_dma(host); /* @@ -1936,7 +1912,7 @@ static int dw_mci_probe(struct platform_device *pdev) } /* Reset all blocks */ - if (!mci_wait_reset(&pdev->dev, host)) { + if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; goto err_dmaunmap; } @@ -1979,13 +1955,10 @@ static int dw_mci_probe(struct platform_device *pdev) if (!dw_mci_card_workqueue) goto err_dmaunmap; INIT_WORK(&host->card_work, dw_mci_work_routine_card); - - ret = request_irq(irq, dw_mci_interrupt, 0, "dw-mci", host); + ret = request_irq(host->irq, dw_mci_interrupt, host->irq_flags, "dw-mci", host); if (ret) goto err_workqueue; - platform_set_drvdata(pdev, host); - if (host->pdata->num_slots) host->num_slots = host->pdata->num_slots; else @@ -2005,7 +1978,7 @@ static int dw_mci_probe(struct platform_device *pdev) * Need to check the version-id and set data-offset for DATA register. */ host->verid = SDMMC_GET_VERID(mci_readl(host, VERID)); - dev_info(&pdev->dev, "Version ID is %04x\n", host->verid); + dev_info(&host->dev, "Version ID is %04x\n", host->verid); if (host->verid < DW_MMC_240A) host->data_offset = DATA_OFFSET; @@ -2022,12 +1995,12 @@ static int dw_mci_probe(struct platform_device *pdev) DW_MCI_ERROR_FLAGS | SDMMC_INT_CD); mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */ - dev_info(&pdev->dev, "DW MMC controller at irq %d, " + dev_info(&host->dev, "DW MMC controller at irq %d, " "%d bit host data width, " "%u deep fifo\n", - irq, width, fifo_size); + host->irq, width, fifo_size); if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) - dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n"); + dev_info(&host->dev, "Internal DMAC interrupt fix enabled.\n"); return 0; @@ -2038,7 +2011,7 @@ err_init_slot: dw_mci_cleanup_slot(host->slot[i], i); i--; } - free_irq(irq, host); + free_irq(host->irq, host); err_workqueue: destroy_workqueue(dw_mci_card_workqueue); @@ -2046,33 +2019,26 @@ err_workqueue: err_dmaunmap: if (host->use_dma && host->dma_ops->exit) host->dma_ops->exit(host); - dma_free_coherent(&host->pdev->dev, PAGE_SIZE, + dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); - iounmap(host->regs); if (host->vmmc) { regulator_disable(host->vmmc); regulator_put(host->vmmc); } - - -err_freehost: - kfree(host); return ret; } +EXPORT_SYMBOL(dw_mci_probe); -static int __exit dw_mci_remove(struct platform_device *pdev) +void dw_mci_remove(struct dw_mci *host) { - struct dw_mci *host = platform_get_drvdata(pdev); int i; mci_writel(host, RINTSTS, 0xFFFFFFFF); mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */ - platform_set_drvdata(pdev, NULL); - for (i = 0; i < host->num_slots; i++) { - dev_dbg(&pdev->dev, "remove slot %d\n", i); + dev_dbg(&host->dev, "remove slot %d\n", i); if (host->slot[i]) dw_mci_cleanup_slot(host->slot[i], i); } @@ -2081,9 +2047,9 @@ static int __exit dw_mci_remove(struct platform_device *pdev) mci_writel(host, CLKENA, 0); mci_writel(host, CLKSRC, 0); - free_irq(platform_get_irq(pdev, 0), host); + free_irq(host->irq, host); destroy_workqueue(dw_mci_card_workqueue); - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); + dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); if (host->use_dma && host->dma_ops->exit) host->dma_ops->exit(host); @@ -2093,20 +2059,18 @@ static int __exit dw_mci_remove(struct platform_device *pdev) regulator_put(host->vmmc); } - iounmap(host->regs); - - kfree(host); - return 0; } +EXPORT_SYMBOL(dw_mci_remove); + + #ifdef CONFIG_PM_SLEEP /* * TODO: we should probably disable the clock to the card in the suspend path. */ -static int dw_mci_suspend(struct device *dev) +int dw_mci_suspend(struct dw_mci *host) { - int i, ret; - struct dw_mci *host = dev_get_drvdata(dev); + int i, ret = 0; for (i = 0; i < host->num_slots; i++) { struct dw_mci_slot *slot = host->slot[i]; @@ -2128,11 +2092,11 @@ static int dw_mci_suspend(struct device *dev) return 0; } +EXPORT_SYMBOL(dw_mci_suspend); -static int dw_mci_resume(struct device *dev) +int dw_mci_resume(struct dw_mci *host) { int i, ret; - struct dw_mci *host = dev_get_drvdata(dev); if (host->vmmc) regulator_enable(host->vmmc); @@ -2140,7 +2104,7 @@ static int dw_mci_resume(struct device *dev) if (host->dma_ops->init) host->dma_ops->init(host); - if (!mci_wait_reset(dev, host)) { + if (!mci_wait_reset(&host->dev, host)) { ret = -ENODEV; return ret; } @@ -2162,32 +2126,19 @@ static int dw_mci_resume(struct device *dev) if (ret < 0) return ret; } - return 0; } -#else -#define dw_mci_suspend NULL -#define dw_mci_resume NULL +EXPORT_SYMBOL(dw_mci_resume); #endif /* CONFIG_PM_SLEEP */ -static SIMPLE_DEV_PM_OPS(dw_mci_pmops, dw_mci_suspend, dw_mci_resume); - -static struct platform_driver dw_mci_driver = { - .remove = __exit_p(dw_mci_remove), - .driver = { - .name = "dw_mmc", - .pm = &dw_mci_pmops, - }, -}; - static int __init dw_mci_init(void) { - return platform_driver_probe(&dw_mci_driver, dw_mci_probe); + printk(KERN_INFO "Synopsys Designware Multimedia Card Interface Driver"); + return 0; } static void __exit dw_mci_exit(void) { - platform_driver_unregister(&dw_mci_driver); } module_init(dw_mci_init); diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index df392a1143f..15c27e17c23 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -175,4 +175,11 @@ (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value)) #endif +extern int dw_mci_probe(struct dw_mci *host); +extern void dw_mci_remove(struct dw_mci *host); +#ifdef CONFIG_PM +extern int dw_mci_suspend(struct dw_mci *host); +extern int dw_mci_resume(struct dw_mci *host); +#endif + #endif /* _DW_MMC_H_ */ diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index aae5d1f1bb3..8f66e28f5a0 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -76,7 +76,7 @@ struct mmc_data; * @num_slots: Number of slots available. * @verid: Denote Version ID. * @data_offset: Set the offset of DATA register according to VERID. - * @pdev: Platform device associated with the MMC controller. + * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. @@ -87,6 +87,8 @@ struct mmc_data; * @push_data: Pointer to FIFO push function. * @pull_data: Pointer to FIFO pull function. * @quirks: Set of quirks that apply to specific versions of the IP. + * @irq_flags: The flags to be passed to request_irq. + * @irq: The irq value to be passed to request_irq. * * Locking * ======= @@ -153,7 +155,7 @@ struct dw_mci { u32 fifoth_val; u16 verid; u16 data_offset; - struct platform_device *pdev; + struct device dev; struct dw_mci_board *pdata; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; @@ -174,6 +176,8 @@ struct dw_mci { u32 quirks; struct regulator *vmmc; /* Power regulator */ + unsigned long irq_flags; /* IRQ flags */ + unsigned int irq; }; /* DMA ops for Internal/External DMAC interface */ -- cgit v1.2.3-70-g09d2 From 8b8252813dee8e8cd453bb219731c36b268c69a7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 Mar 2012 12:50:51 +1030 Subject: module_param: remove support for bool parameters which are really int. module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. This eliminates that code (though leaves the flags field in the struct, for impending use). Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 19 ++++++------------- kernel/params.c | 23 ++--------------------- 2 files changed, 8 insertions(+), 34 deletions(-) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index c47f4d60db0..4daa895648d 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -47,9 +47,6 @@ struct kernel_param_ops { void (*free)(void *arg); }; -/* Flag bits for kernel_param.flags */ -#define KPARAM_ISBOOL 2 - struct kernel_param { const char *name; const struct kernel_param_ops *ops; @@ -131,8 +128,7 @@ struct kparam_array * The ops can have NULL set or get functions. */ #define module_param_cb(name, ops, arg, perm) \ - __module_param_call(MODULE_PARAM_PREFIX, \ - name, ops, arg, __same_type((arg), bool *), perm) + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm) /* On alpha, ia64 and ppc64 relocations to global data cannot go into read-only sections (which is part of respective UNIX ABI on these @@ -146,7 +142,7 @@ struct kparam_array /* This is the fundamental function for registering boot/module parameters. */ -#define __module_param_call(prefix, name, ops, arg, isbool, perm) \ +#define __module_param_call(prefix, name, ops, arg, perm) \ /* Default value instead of permissions? */ \ static int __param_perm_check_##name __attribute__((unused)) = \ BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \ @@ -155,8 +151,7 @@ struct kparam_array static struct kernel_param __moduleparam_const __param_##name \ __used \ __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \ - = { __param_str_##name, ops, perm, isbool ? KPARAM_ISBOOL : 0, \ - { arg } } + = { __param_str_##name, ops, perm, 0, { arg } } /* Obsolete - use module_param_cb() */ #define module_param_call(name, set, get, arg, perm) \ @@ -164,7 +159,6 @@ struct kparam_array { (void *)set, (void *)get }; \ __module_param_call(MODULE_PARAM_PREFIX, \ name, &__param_ops_##name, arg, \ - __same_type(arg, bool *), \ (perm) + sizeof(__check_old_set_param(set))*0) /* We don't get oldget: it's often a new-style param_get_uint, etc. */ @@ -245,8 +239,7 @@ static inline void __kernel_param_unlock(void) */ #define core_param(name, var, type, perm) \ param_check_##type(name, &(var)); \ - __module_param_call("", name, ¶m_ops_##type, \ - &var, __same_type(var, bool), perm) + __module_param_call("", name, ¶m_ops_##type, &var, perm) #endif /* !MODULE */ /** @@ -264,7 +257,7 @@ static inline void __kernel_param_unlock(void) = { len, string }; \ __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_ops_string, \ - .str = &__param_string_##name, 0, perm); \ + .str = &__param_string_##name, perm); \ __MODULE_PARM_TYPE(name, "string") /** @@ -403,7 +396,7 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp); __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_array_ops, \ .arr = &__param_arr_##name, \ - __same_type(array[0], bool), perm); \ + perm); \ __MODULE_PARM_TYPE(name, "array of " #type) extern struct kernel_param_ops param_array_ops; diff --git a/kernel/params.c b/kernel/params.c index 47f5bf12434..508828afb87 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -297,35 +297,18 @@ EXPORT_SYMBOL(param_ops_charp); /* Actually could be a bool or an int, for historical reasons. */ int param_set_bool(const char *val, const struct kernel_param *kp) { - bool v; - int ret; - /* No equals means "set"... */ if (!val) val = "1"; /* One of =[yYnN01] */ - ret = strtobool(val, &v); - if (ret) - return ret; - - if (kp->flags & KPARAM_ISBOOL) - *(bool *)kp->arg = v; - else - *(int *)kp->arg = v; - return 0; + return strtobool(val, kp->arg); } EXPORT_SYMBOL(param_set_bool); int param_get_bool(char *buffer, const struct kernel_param *kp) { - bool val; - if (kp->flags & KPARAM_ISBOOL) - val = *(bool *)kp->arg; - else - val = *(int *)kp->arg; - /* Y and N chosen as being relatively non-coder friendly */ - return sprintf(buffer, "%c", val ? 'Y' : 'N'); + return sprintf(buffer, "%c", *(bool *)kp->arg ? 'Y' : 'N'); } EXPORT_SYMBOL(param_get_bool); @@ -343,7 +326,6 @@ int param_set_invbool(const char *val, const struct kernel_param *kp) struct kernel_param dummy; dummy.arg = &boolval; - dummy.flags = KPARAM_ISBOOL; ret = param_set_bool(val, &dummy); if (ret == 0) *(bool *)kp->arg = !boolval; @@ -372,7 +354,6 @@ int param_set_bint(const char *val, const struct kernel_param *kp) /* Match bool exactly, by re-using it. */ boolkp = *kp; boolkp.arg = &v; - boolkp.flags |= KPARAM_ISBOOL; ret = param_set_bool(val, &boolkp); if (ret == 0) -- cgit v1.2.3-70-g09d2 From 026cee0086fe1df4cf74691cf273062cc769617d Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Mon, 26 Mar 2012 12:50:51 +1030 Subject: params: _initcall-like kernel parameters This patch adds a set of macros that can be used to declare kernel parameters to be parsed _before_ initcalls at a chosen level are executed. We rename the now-unused "flags" field of struct kernel_param as the level. It's signed, for when we use this for early params as well, in future. Linker macro collating init calls had to be modified in order to add additional symbols between levels that are later used by the init code to split the calls into blocks. Signed-off-by: Pawel Moll Signed-off-by: Rusty Russell --- arch/powerpc/mm/hugetlbpage.c | 3 +- include/asm-generic/vmlinux.lds.h | 35 +++++++++------------ include/linux/moduleparam.h | 51 +++++++++++++++++++++++++----- init/main.c | 65 +++++++++++++++++++++++++++++++++++---- kernel/module.c | 3 +- kernel/params.c | 16 +++++++--- 6 files changed, 132 insertions(+), 41 deletions(-) (limited to 'include/linux') diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 57c7465e656..a3e62872769 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -310,7 +310,8 @@ void __init reserve_hugetlb_gpages(void) int i; strlcpy(cmdline, boot_command_line, COMMAND_LINE_SIZE); - parse_args("hugetlb gpages", cmdline, NULL, 0, &do_gpage_early_setup); + parse_args("hugetlb gpages", cmdline, NULL, 0, 0, 0, + &do_gpage_early_setup); /* * Walk gpage list in reverse, allocating larger page sizes first. diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 798603e8ec3..8aeadf6b553 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -616,30 +616,23 @@ *(.init.setup) \ VMLINUX_SYMBOL(__setup_end) = .; -#define INITCALLS \ - *(.initcallearly.init) \ - VMLINUX_SYMBOL(__early_initcall_end) = .; \ - *(.initcall0.init) \ - *(.initcall0s.init) \ - *(.initcall1.init) \ - *(.initcall1s.init) \ - *(.initcall2.init) \ - *(.initcall2s.init) \ - *(.initcall3.init) \ - *(.initcall3s.init) \ - *(.initcall4.init) \ - *(.initcall4s.init) \ - *(.initcall5.init) \ - *(.initcall5s.init) \ - *(.initcallrootfs.init) \ - *(.initcall6.init) \ - *(.initcall6s.init) \ - *(.initcall7.init) \ - *(.initcall7s.init) +#define INIT_CALLS_LEVEL(level) \ + VMLINUX_SYMBOL(__initcall##level##_start) = .; \ + *(.initcall##level##.init) \ + *(.initcall##level##s.init) \ #define INIT_CALLS \ VMLINUX_SYMBOL(__initcall_start) = .; \ - INITCALLS \ + *(.initcallearly.init) \ + INIT_CALLS_LEVEL(0) \ + INIT_CALLS_LEVEL(1) \ + INIT_CALLS_LEVEL(2) \ + INIT_CALLS_LEVEL(3) \ + INIT_CALLS_LEVEL(4) \ + INIT_CALLS_LEVEL(5) \ + INIT_CALLS_LEVEL(rootfs) \ + INIT_CALLS_LEVEL(6) \ + INIT_CALLS_LEVEL(7) \ VMLINUX_SYMBOL(__initcall_end) = .; #define CON_INITCALL \ diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 4daa895648d..ea36486378d 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -51,7 +51,7 @@ struct kernel_param { const char *name; const struct kernel_param_ops *ops; u16 perm; - u16 flags; + s16 level; union { void *arg; const struct kparam_string *str; @@ -128,7 +128,40 @@ struct kparam_array * The ops can have NULL set or get functions. */ #define module_param_cb(name, ops, arg, perm) \ - __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm) + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, 0) + +/** + * _param_cb - general callback for a module/cmdline parameter + * to be evaluated before certain initcall level + * @name: a valid C identifier which is the parameter name. + * @ops: the set & get operations for this parameter. + * @perm: visibility in sysfs. + * + * The ops can have NULL set or get functions. + */ +#define __level_param_cb(name, ops, arg, perm, level) \ + __module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, level) + +#define core_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 1) + +#define postcore_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 2) + +#define arch_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 3) + +#define subsys_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 4) + +#define fs_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 5) + +#define device_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 6) + +#define late_param_cb(name, ops, arg, perm) \ + __level_param_cb(name, ops, arg, perm, 7) /* On alpha, ia64 and ppc64 relocations to global data cannot go into read-only sections (which is part of respective UNIX ABI on these @@ -142,7 +175,7 @@ struct kparam_array /* This is the fundamental function for registering boot/module parameters. */ -#define __module_param_call(prefix, name, ops, arg, perm) \ +#define __module_param_call(prefix, name, ops, arg, perm, level) \ /* Default value instead of permissions? */ \ static int __param_perm_check_##name __attribute__((unused)) = \ BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \ @@ -151,7 +184,7 @@ struct kparam_array static struct kernel_param __moduleparam_const __param_##name \ __used \ __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \ - = { __param_str_##name, ops, perm, 0, { arg } } + = { __param_str_##name, ops, perm, level, { arg } } /* Obsolete - use module_param_cb() */ #define module_param_call(name, set, get, arg, perm) \ @@ -159,7 +192,7 @@ struct kparam_array { (void *)set, (void *)get }; \ __module_param_call(MODULE_PARAM_PREFIX, \ name, &__param_ops_##name, arg, \ - (perm) + sizeof(__check_old_set_param(set))*0) + (perm) + sizeof(__check_old_set_param(set))*0, 0) /* We don't get oldget: it's often a new-style param_get_uint, etc. */ static inline int @@ -239,7 +272,7 @@ static inline void __kernel_param_unlock(void) */ #define core_param(name, var, type, perm) \ param_check_##type(name, &(var)); \ - __module_param_call("", name, ¶m_ops_##type, &var, perm) + __module_param_call("", name, ¶m_ops_##type, &var, perm, 0) #endif /* !MODULE */ /** @@ -257,7 +290,7 @@ static inline void __kernel_param_unlock(void) = { len, string }; \ __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_ops_string, \ - .str = &__param_string_##name, perm); \ + .str = &__param_string_##name, perm, 0); \ __MODULE_PARM_TYPE(name, "string") /** @@ -285,6 +318,8 @@ extern int parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, + s16 level_min, + s16 level_max, int (*unknown)(char *param, char *val)); /* Called by module remove. */ @@ -396,7 +431,7 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp); __module_param_call(MODULE_PARAM_PREFIX, name, \ ¶m_array_ops, \ .arr = &__param_arr_##name, \ - perm); \ + perm, 0); \ __MODULE_PARM_TYPE(name, "array of " #type) extern struct kernel_param_ops param_array_ops; diff --git a/init/main.c b/init/main.c index c24805c824b..439715858ba 100644 --- a/init/main.c +++ b/init/main.c @@ -400,7 +400,7 @@ static int __init do_early_param(char *param, char *val) void __init parse_early_options(char *cmdline) { - parse_args("early options", cmdline, NULL, 0, do_early_param); + parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param); } /* Arch code calls this early on, or if not, just before other parsing. */ @@ -503,7 +503,7 @@ asmlinkage void __init start_kernel(void) parse_early_param(); parse_args("Booting kernel", static_command_line, __start___param, __stop___param - __start___param, - &unknown_bootoption); + 0, 0, &unknown_bootoption); jump_label_init(); @@ -699,16 +699,69 @@ int __init_or_module do_one_initcall(initcall_t fn) } -extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[]; +extern initcall_t __initcall_start[]; +extern initcall_t __initcall0_start[]; +extern initcall_t __initcall1_start[]; +extern initcall_t __initcall2_start[]; +extern initcall_t __initcall3_start[]; +extern initcall_t __initcall4_start[]; +extern initcall_t __initcall5_start[]; +extern initcall_t __initcall6_start[]; +extern initcall_t __initcall7_start[]; +extern initcall_t __initcall_end[]; + +static initcall_t *initcall_levels[] __initdata = { + __initcall0_start, + __initcall1_start, + __initcall2_start, + __initcall3_start, + __initcall4_start, + __initcall5_start, + __initcall6_start, + __initcall7_start, + __initcall_end, +}; + +static char *initcall_level_names[] __initdata = { + "early parameters", + "core parameters", + "postcore parameters", + "arch parameters", + "subsys parameters", + "fs parameters", + "device parameters", + "late parameters", +}; + +static int __init ignore_unknown_bootoption(char *param, char *val) +{ + return 0; +} -static void __init do_initcalls(void) +static void __init do_initcall_level(int level) { + extern const struct kernel_param __start___param[], __stop___param[]; initcall_t *fn; - for (fn = __early_initcall_end; fn < __initcall_end; fn++) + strcpy(static_command_line, saved_command_line); + parse_args(initcall_level_names[level], + static_command_line, __start___param, + __stop___param - __start___param, + level, level, + ignore_unknown_bootoption); + + for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++) do_one_initcall(*fn); } +static void __init do_initcalls(void) +{ + int level; + + for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++) + do_initcall_level(level); +} + /* * Ok, the machine is now initialized. None of the devices * have been touched yet, but the CPU subsystem is up and @@ -732,7 +785,7 @@ static void __init do_pre_smp_initcalls(void) { initcall_t *fn; - for (fn = __initcall_start; fn < __early_initcall_end; fn++) + for (fn = __initcall_start; fn < __initcall0_start; fn++) do_one_initcall(*fn); } diff --git a/kernel/module.c b/kernel/module.c index 7e31da9750c..6f6651a5459 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2923,7 +2923,8 @@ static struct module *load_module(void __user *umod, mutex_unlock(&module_mutex); /* Module is ready to execute: parsing args may do that. */ - err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, NULL); + err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, + -32768, 32767, NULL); if (err < 0) goto unlink; diff --git a/kernel/params.c b/kernel/params.c index 508828afb87..f37d8263134 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -87,6 +87,8 @@ static int parse_one(char *param, char *val, const struct kernel_param *params, unsigned num_params, + s16 min_level, + s16 max_level, int (*handle_unknown)(char *param, char *val)) { unsigned int i; @@ -95,6 +97,9 @@ static int parse_one(char *param, /* Find parameter */ for (i = 0; i < num_params; i++) { if (parameq(param, params[i].name)) { + if (params[i].level < min_level + || params[i].level > max_level) + return 0; /* No one handled NULL, so do it here. */ if (!val && params[i].ops->set != param_set_bool && params[i].ops->set != param_set_bint) @@ -174,6 +179,8 @@ int parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, + s16 min_level, + s16 max_level, int (*unknown)(char *param, char *val)) { char *param, *val; @@ -189,7 +196,8 @@ int parse_args(const char *name, args = next_arg(args, ¶m, &val); irq_was_disabled = irqs_disabled(); - ret = parse_one(param, val, params, num, unknown); + ret = parse_one(param, val, params, num, + min_level, max_level, unknown); if (irq_was_disabled && !irqs_disabled()) { printk(KERN_WARNING "parse_args(): option '%s' enabled " "irq's!\n", param); @@ -374,7 +382,7 @@ static int param_array(const char *name, unsigned int min, unsigned int max, void *elem, int elemsize, int (*set)(const char *, const struct kernel_param *kp), - u16 flags, + s16 level, unsigned int *num) { int ret; @@ -384,7 +392,7 @@ static int param_array(const char *name, /* Get the name right for errors. */ kp.name = name; kp.arg = elem; - kp.flags = flags; + kp.level = level; *num = 0; /* We expect a comma-separated list of values. */ @@ -425,7 +433,7 @@ static int param_array_set(const char *val, const struct kernel_param *kp) unsigned int temp_num; return param_array(kp->name, val, 1, arr->max, arr->elem, - arr->elemsize, arr->ops->set, kp->flags, + arr->elemsize, arr->ops->set, kp->level, arr->num ?: &temp_num); } -- cgit v1.2.3-70-g09d2 From d53799be6758841e1ffb1fd3780f73d0ffe44432 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 26 Mar 2012 12:50:52 +1030 Subject: module: move __module_get and try_module_get() out of line. With the preempt, tracepoint and everything, it's getting a bit chubby. For an Ubuntu-based config: Before: $ size -t `find * -name '*.ko'` | grep TOTAL 56199906 3870760 1606616 61677282 3ad1ee2 (TOTALS) $ size vmlinux text data bss dec hex filename 8509342 850368 3358720 12718430 c2115e vmlinux After: $ size -t `find * -name '*.ko'` | grep TOTAL 56183760 3867892 1606616 61658268 3acd49c (TOTALS) $ size vmlinux text data bss dec hex filename 8501842 849088 3358720 12709650 c1ef12 vmlinux Signed-off-by: Steven Rostedt Acked-by: Ingo Molnar Signed-off-by: Rusty Russell (made all out-of-line) --- include/linux/module.h | 32 ++++---------------------------- kernel/module.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 28 deletions(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 4598bf03e98..fbcafe2ee13 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -21,8 +21,6 @@ #include #include -#include - /* Not Yet Implemented */ #define MODULE_SUPPORTED_DEVICE(name) @@ -452,33 +450,11 @@ void symbol_put_addr(void *addr); /* Sometimes we know we already have a refcount, and it's easier not to handle the error case (which only happens with rmmod --wait). */ -static inline void __module_get(struct module *module) -{ - if (module) { - preempt_disable(); - __this_cpu_inc(module->refptr->incs); - trace_module_get(module, _THIS_IP_); - preempt_enable(); - } -} - -static inline int try_module_get(struct module *module) -{ - int ret = 1; - - if (module) { - preempt_disable(); +extern void __module_get(struct module *module); - if (likely(module_is_live(module))) { - __this_cpu_inc(module->refptr->incs); - trace_module_get(module, _THIS_IP_); - } else - ret = 0; - - preempt_enable(); - } - return ret; -} +/* This is the Right Way to get a module: if it fails, it's being removed, + * so pretend it's not there. */ +extern bool try_module_get(struct module *module); extern void module_put(struct module *module); diff --git a/kernel/module.c b/kernel/module.c index 6f6651a5459..294692d8fcd 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -904,6 +904,36 @@ static ssize_t show_refcnt(struct module_attribute *mattr, static struct module_attribute modinfo_refcnt = __ATTR(refcnt, 0444, show_refcnt, NULL); +void __module_get(struct module *module) +{ + if (module) { + preempt_disable(); + __this_cpu_inc(module->refptr->incs); + trace_module_get(module, _RET_IP_); + preempt_enable(); + } +} +EXPORT_SYMBOL(__module_get); + +bool try_module_get(struct module *module) +{ + bool ret = true; + + if (module) { + preempt_disable(); + + if (likely(module_is_live(module))) { + __this_cpu_inc(module->refptr->incs); + trace_module_get(module, _RET_IP_); + } else + ret = false; + + preempt_enable(); + } + return ret; +} +EXPORT_SYMBOL(try_module_get); + void module_put(struct module *module) { if (module) { -- cgit v1.2.3-70-g09d2 From 33ea2dcb39ba50b0b69d1b1dc24702f084b46411 Mon Sep 17 00:00:00 2001 From: Sumit Semwal Date: Fri, 27 Jan 2012 15:09:27 +0530 Subject: dma-buf: add dma_data_direction to unmap dma_buf_op Some exporters may use DMA map/unmap APIs in dma-buf ops, which require enum dma_data_direction for both map and unmap operations. Thus, the unmap dma_buf_op also needs to have enum dma_data_direction as a parameter. Reported-by: Tomasz Stanislawski Signed-off-by: Sumit Semwal Reviewed-by: Daniel Vetter Signed-off-by: Sumit Semwal --- drivers/base/dma-buf.c | 7 +++++-- include/linux/dma-buf.h | 8 +++++--- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index 8afe2dd1791..c9a945fd1a0 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -271,16 +271,19 @@ EXPORT_SYMBOL_GPL(dma_buf_map_attachment); * dma_buf_ops. * @attach: [in] attachment to unmap buffer from * @sg_table: [in] scatterlist info of the buffer to unmap + * @direction: [in] direction of DMA transfer * */ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, - struct sg_table *sg_table) + struct sg_table *sg_table, + enum dma_data_direction direction) { if (WARN_ON(!attach || !attach->dmabuf || !sg_table)) return; mutex_lock(&attach->dmabuf->lock); - attach->dmabuf->ops->unmap_dma_buf(attach, sg_table); + attach->dmabuf->ops->unmap_dma_buf(attach, sg_table, + direction); mutex_unlock(&attach->dmabuf->lock); } diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index 86f62414104..a885b2689b8 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -63,7 +63,8 @@ struct dma_buf_ops { struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *, enum dma_data_direction); void (*unmap_dma_buf)(struct dma_buf_attachment *, - struct sg_table *); + struct sg_table *, + enum dma_data_direction); /* TODO: Add try_map_dma_buf version, to return immed with -EBUSY * if the call would block. */ @@ -122,7 +123,8 @@ void dma_buf_put(struct dma_buf *dmabuf); struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *, enum dma_data_direction); -void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *); +void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *, + enum dma_data_direction); #else static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, @@ -166,7 +168,7 @@ static inline struct sg_table *dma_buf_map_attachment( } static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, - struct sg_table *sg) + struct sg_table *sg, enum dma_data_direction dir) { return; } -- cgit v1.2.3-70-g09d2 From 55c1c4ca23d0f2736ef7c219d0fb005323ff8ee0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 16 Mar 2012 10:34:02 +0000 Subject: dma-buf: pass flags into dma_buf_fd. We need to pass the flags into dma_buf_fd at this point, so the flags end up doing the right thing for O_CLOEXEC. Signed-off-by: Dave Airlie Signed-off-by: Rob Clark Signed-off-by: Sumit Semwal --- drivers/base/dma-buf.c | 5 +++-- include/linux/dma-buf.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index c9a945fd1a0..3c8c0232ce4 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -107,17 +107,18 @@ EXPORT_SYMBOL_GPL(dma_buf_export); /** * dma_buf_fd - returns a file descriptor for the given dma_buf * @dmabuf: [in] pointer to dma_buf for which fd is required. + * @flags: [in] flags to give to fd * * On success, returns an associated 'fd'. Else, returns error. */ -int dma_buf_fd(struct dma_buf *dmabuf) +int dma_buf_fd(struct dma_buf *dmabuf, int flags) { int error, fd; if (!dmabuf || !dmabuf->file) return -EINVAL; - error = get_unused_fd(); + error = get_unused_fd_flags(flags); if (error < 0) return error; fd = error; diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index a885b2689b8..891457a86b3 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -117,7 +117,7 @@ void dma_buf_detach(struct dma_buf *dmabuf, struct dma_buf_attachment *dmabuf_attach); struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, size_t size, int flags); -int dma_buf_fd(struct dma_buf *dmabuf); +int dma_buf_fd(struct dma_buf *dmabuf, int flags); struct dma_buf *dma_buf_get(int fd); void dma_buf_put(struct dma_buf *dmabuf); -- cgit v1.2.3-70-g09d2 From f9a24d1ac9cb82baf5ec5efdb6580a9ce0bd5bfc Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 16 Mar 2012 11:04:41 -0500 Subject: dma-buf: add get_dma_buf() Works in a similar way to get_file(), and is needed in cases such as when the exporter needs to also keep a reference to the dmabuf (that is later released with a dma_buf_put()), and possibly other similar cases. Signed-off-by: Rob Clark Reviewed-by: Dave Airlie Reviewed-by: Kyungmin Park Signed-off-by: Sumit Semwal --- include/linux/dma-buf.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index 891457a86b3..bc4203dc6e1 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -30,6 +30,7 @@ #include #include #include +#include struct dma_buf; struct dma_buf_attachment; @@ -110,6 +111,20 @@ struct dma_buf_attachment { void *priv; }; +/** + * get_dma_buf - convenience wrapper for get_file. + * @dmabuf: [in] pointer to dma_buf + * + * Increments the reference count on the dma-buf, needed in case of drivers + * that either need to create additional references to the dmabuf on the + * kernel side. For example, an exporter that needs to keep a dmabuf ptr + * so that subsequent exports don't create a new dmabuf. + */ +static inline void get_dma_buf(struct dma_buf *dmabuf) +{ + get_file(dmabuf->file); +} + #ifdef CONFIG_DMA_SHARED_BUFFER struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, struct device *dev); -- cgit v1.2.3-70-g09d2 From 6b607e3a658fee490bdabfdeb739a3eb498b1bff Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 19 Mar 2012 00:34:25 +0100 Subject: dma-buf: don't hold the mutex around map/unmap calls The mutex protects the attachment list and hence needs to be held around the callbakc to the exporters (optional) attach/detach functions. Holding the mutex around the map/unmap calls doesn't protect any dma_buf state. Exporters need to properly protect any of their own state anyway (to protect against calls from their own interfaces). So this only makes the locking messier (and lockdep easier to anger). Therefore let's just drop this. v2: Rebased on top of latest dma-buf-next git. Signed-off-by: Daniel Vetter Reviewed-by: Rob Clark Signed-off-by: Sumit Semwal --- drivers/base/dma-buf.c | 5 ----- include/linux/dma-buf.h | 2 +- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index 3c8c0232ce4..5641b9c8d50 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -258,9 +258,7 @@ struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *attach, if (WARN_ON(!attach || !attach->dmabuf)) return ERR_PTR(-EINVAL); - mutex_lock(&attach->dmabuf->lock); sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction); - mutex_unlock(&attach->dmabuf->lock); return sg_table; } @@ -282,10 +280,7 @@ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, if (WARN_ON(!attach || !attach->dmabuf || !sg_table)) return; - mutex_lock(&attach->dmabuf->lock); attach->dmabuf->ops->unmap_dma_buf(attach, sg_table, direction); - mutex_unlock(&attach->dmabuf->lock); - } EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment); diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index bc4203dc6e1..24e0f482871 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -88,7 +88,7 @@ struct dma_buf { struct file *file; struct list_head attachments; const struct dma_buf_ops *ops; - /* mutex to serialize list manipulation and other ops */ + /* mutex to serialize list manipulation and attach/detach */ struct mutex lock; void *priv; }; -- cgit v1.2.3-70-g09d2 From fc13020e086bfedf2afb95c91c026d5af1f80107 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 20 Mar 2012 00:02:37 +0100 Subject: dma-buf: add support for kernel cpu access Big differences to other contenders in the field (like ion) is that this also supports highmem, so we have to split up the cpu access from the kernel side into a prepare and a kmap step. Prepare is allowed to fail and should do everything required so that the kmap calls can succeed (like swapin/backing storage allocation, flushing, ...). More in-depth explanations will follow in the follow-up documentation patch. Changes in v2: - Clear up begin_cpu_access confusion noticed by Sumit Semwal. - Don't automatically fallback from the _atomic variants to the non-atomic variants. The _atomic callbacks are not allowed to sleep, so we want exporters to make this decision explicit. The function signatures are explicit, so simpler exporters can still use the same function for both. - Make the unmap functions optional. Simpler exporters with permanent mappings don't need to do anything at unmap time. Changes in v3: - Adjust the WARN_ON checks for the new ->ops functions as suggested by Rob Clark and Sumit Semwal. - Rebased on top of latest dma-buf-next git. Changes in v4: - Fixup a missing - in a return -EINVAL; statement. Signed-Off-by: Daniel Vetter Signed-off-by: Rob Clark Signed-off-by: Sumit Semwal --- drivers/base/dma-buf.c | 124 +++++++++++++++++++++++++++++++++++++++++++++++- include/linux/dma-buf.h | 59 +++++++++++++++++++++++ 2 files changed, 182 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c index 5641b9c8d50..07cbbc6fddb 100644 --- a/drivers/base/dma-buf.c +++ b/drivers/base/dma-buf.c @@ -80,7 +80,9 @@ struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops, if (WARN_ON(!priv || !ops || !ops->map_dma_buf || !ops->unmap_dma_buf - || !ops->release)) { + || !ops->release + || !ops->kmap_atomic + || !ops->kmap)) { return ERR_PTR(-EINVAL); } @@ -284,3 +286,123 @@ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, direction); } EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment); + + +/** + * dma_buf_begin_cpu_access - Must be called before accessing a dma_buf from the + * cpu in the kernel context. Calls begin_cpu_access to allow exporter-specific + * preparations. Coherency is only guaranteed in the specified range for the + * specified access direction. + * @dma_buf: [in] buffer to prepare cpu access for. + * @start: [in] start of range for cpu access. + * @len: [in] length of range for cpu access. + * @direction: [in] length of range for cpu access. + * + * Can return negative error values, returns 0 on success. + */ +int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, size_t start, size_t len, + enum dma_data_direction direction) +{ + int ret = 0; + + if (WARN_ON(!dmabuf)) + return -EINVAL; + + if (dmabuf->ops->begin_cpu_access) + ret = dmabuf->ops->begin_cpu_access(dmabuf, start, len, direction); + + return ret; +} +EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access); + +/** + * dma_buf_end_cpu_access - Must be called after accessing a dma_buf from the + * cpu in the kernel context. Calls end_cpu_access to allow exporter-specific + * actions. Coherency is only guaranteed in the specified range for the + * specified access direction. + * @dma_buf: [in] buffer to complete cpu access for. + * @start: [in] start of range for cpu access. + * @len: [in] length of range for cpu access. + * @direction: [in] length of range for cpu access. + * + * This call must always succeed. + */ +void dma_buf_end_cpu_access(struct dma_buf *dmabuf, size_t start, size_t len, + enum dma_data_direction direction) +{ + WARN_ON(!dmabuf); + + if (dmabuf->ops->end_cpu_access) + dmabuf->ops->end_cpu_access(dmabuf, start, len, direction); +} +EXPORT_SYMBOL_GPL(dma_buf_end_cpu_access); + +/** + * dma_buf_kmap_atomic - Map a page of the buffer object into kernel address + * space. The same restrictions as for kmap_atomic and friends apply. + * @dma_buf: [in] buffer to map page from. + * @page_num: [in] page in PAGE_SIZE units to map. + * + * This call must always succeed, any necessary preparations that might fail + * need to be done in begin_cpu_access. + */ +void *dma_buf_kmap_atomic(struct dma_buf *dmabuf, unsigned long page_num) +{ + WARN_ON(!dmabuf); + + return dmabuf->ops->kmap_atomic(dmabuf, page_num); +} +EXPORT_SYMBOL_GPL(dma_buf_kmap_atomic); + +/** + * dma_buf_kunmap_atomic - Unmap a page obtained by dma_buf_kmap_atomic. + * @dma_buf: [in] buffer to unmap page from. + * @page_num: [in] page in PAGE_SIZE units to unmap. + * @vaddr: [in] kernel space pointer obtained from dma_buf_kmap_atomic. + * + * This call must always succeed. + */ +void dma_buf_kunmap_atomic(struct dma_buf *dmabuf, unsigned long page_num, + void *vaddr) +{ + WARN_ON(!dmabuf); + + if (dmabuf->ops->kunmap_atomic) + dmabuf->ops->kunmap_atomic(dmabuf, page_num, vaddr); +} +EXPORT_SYMBOL_GPL(dma_buf_kunmap_atomic); + +/** + * dma_buf_kmap - Map a page of the buffer object into kernel address space. The + * same restrictions as for kmap and friends apply. + * @dma_buf: [in] buffer to map page from. + * @page_num: [in] page in PAGE_SIZE units to map. + * + * This call must always succeed, any necessary preparations that might fail + * need to be done in begin_cpu_access. + */ +void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long page_num) +{ + WARN_ON(!dmabuf); + + return dmabuf->ops->kmap(dmabuf, page_num); +} +EXPORT_SYMBOL_GPL(dma_buf_kmap); + +/** + * dma_buf_kunmap - Unmap a page obtained by dma_buf_kmap. + * @dma_buf: [in] buffer to unmap page from. + * @page_num: [in] page in PAGE_SIZE units to unmap. + * @vaddr: [in] kernel space pointer obtained from dma_buf_kmap. + * + * This call must always succeed. + */ +void dma_buf_kunmap(struct dma_buf *dmabuf, unsigned long page_num, + void *vaddr) +{ + WARN_ON(!dmabuf); + + if (dmabuf->ops->kunmap) + dmabuf->ops->kunmap(dmabuf, page_num, vaddr); +} +EXPORT_SYMBOL_GPL(dma_buf_kunmap); diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index 24e0f482871..ee7ef9990d9 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -50,6 +50,17 @@ struct dma_buf_attachment; * @unmap_dma_buf: decreases usecount of buffer, might deallocate scatter * pages. * @release: release this buffer; to be called after the last dma_buf_put. + * @begin_cpu_access: [optional] called before cpu access to invalidate cpu + * caches and allocate backing storage (if not yet done) + * respectively pin the objet into memory. + * @end_cpu_access: [optional] called after cpu access to flush cashes. + * @kmap_atomic: maps a page from the buffer into kernel address + * space, users may not block until the subsequent unmap call. + * This callback must not sleep. + * @kunmap_atomic: [optional] unmaps a atomically mapped page from the buffer. + * This Callback must not sleep. + * @kmap: maps a page from the buffer into kernel address space. + * @kunmap: [optional] unmaps a page from the buffer. */ struct dma_buf_ops { int (*attach)(struct dma_buf *, struct device *, @@ -73,6 +84,14 @@ struct dma_buf_ops { /* after final dma_buf_put() */ void (*release)(struct dma_buf *); + int (*begin_cpu_access)(struct dma_buf *, size_t, size_t, + enum dma_data_direction); + void (*end_cpu_access)(struct dma_buf *, size_t, size_t, + enum dma_data_direction); + void *(*kmap_atomic)(struct dma_buf *, unsigned long); + void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *); + void *(*kmap)(struct dma_buf *, unsigned long); + void (*kunmap)(struct dma_buf *, unsigned long, void *); }; /** @@ -140,6 +159,14 @@ struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *, enum dma_data_direction); void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *, enum dma_data_direction); +int dma_buf_begin_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len, + enum dma_data_direction dir); +void dma_buf_end_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len, + enum dma_data_direction dir); +void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long); +void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *); +void *dma_buf_kmap(struct dma_buf *, unsigned long); +void dma_buf_kunmap(struct dma_buf *, unsigned long, void *); #else static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, @@ -188,6 +215,38 @@ static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, return; } +static inline int dma_buf_begin_cpu_access(struct dma_buf *, + size_t, size_t, + enum dma_data_direction) +{ + return -ENODEV; +} + +static inline void dma_buf_end_cpu_access(struct dma_buf *, + size_t, size_t, + enum dma_data_direction) +{ +} + +static inline void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long) +{ + return NULL; +} + +static inline void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, + void *) +{ +} + +static inline void *dma_buf_kmap(struct dma_buf *, unsigned long) +{ + return NULL; +} + +static inline void dma_buf_kunmap(struct dma_buf *, unsigned long, + void *) +{ +} #endif /* CONFIG_DMA_SHARED_BUFFER */ #endif /* __DMA_BUF_H__ */ -- cgit v1.2.3-70-g09d2 From 3e0b2a1993c06e646d90d71e163d03869a211a4c Mon Sep 17 00:00:00 2001 From: Sumit Semwal Date: Mon, 26 Mar 2012 11:29:19 +0530 Subject: dma-buf: correct dummy function declarations. Dummy functions for the newly added cpu access ops need variable names for arguments. Also, the introduction of flags in dma_buf_fd needs to be added to dummy functions as well. Signed-off-by: Sumit Semwal Signed-off-by: Sumit Semwal --- include/linux/dma-buf.h | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index ee7ef9990d9..f141745a13b 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -188,7 +188,7 @@ static inline struct dma_buf *dma_buf_export(void *priv, return ERR_PTR(-ENODEV); } -static inline int dma_buf_fd(struct dma_buf *dmabuf) +static inline int dma_buf_fd(struct dma_buf *dmabuf, int flags) { return -ENODEV; } @@ -215,36 +215,37 @@ static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, return; } -static inline int dma_buf_begin_cpu_access(struct dma_buf *, - size_t, size_t, - enum dma_data_direction) +static inline int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, + size_t start, size_t len, + enum dma_data_direction dir) { return -ENODEV; } -static inline void dma_buf_end_cpu_access(struct dma_buf *, - size_t, size_t, - enum dma_data_direction) +static inline void dma_buf_end_cpu_access(struct dma_buf *dmabuf, + size_t start, size_t len, + enum dma_data_direction dir) { } -static inline void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long) +static inline void *dma_buf_kmap_atomic(struct dma_buf *dmabuf, + unsigned long pnum) { return NULL; } -static inline void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, - void *) +static inline void dma_buf_kunmap_atomic(struct dma_buf *dmabuf, + unsigned long pnum, void *vaddr) { } -static inline void *dma_buf_kmap(struct dma_buf *, unsigned long) +static inline void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long pnum) { return NULL; } -static inline void dma_buf_kunmap(struct dma_buf *, unsigned long, - void *) +static inline void dma_buf_kunmap(struct dma_buf *dmabuf, + unsigned long pnum, void *vaddr) { } #endif /* CONFIG_DMA_SHARED_BUFFER */ -- cgit v1.2.3-70-g09d2 From 0ab628d856a63d63b47307b09851d1e955c706ac Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 21 Mar 2012 09:52:06 -0400 Subject: nfsd: add a header describing upcall to nfsdcld The daemon takes a versioned binary struct. Hopefully this should allow us to revise the struct later if it becomes necessary. Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- include/linux/nfsd/cld.h | 56 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 include/linux/nfsd/cld.h (limited to 'include/linux') diff --git a/include/linux/nfsd/cld.h b/include/linux/nfsd/cld.h new file mode 100644 index 00000000000..f14a9ab06f1 --- /dev/null +++ b/include/linux/nfsd/cld.h @@ -0,0 +1,56 @@ +/* + * Upcall description for nfsdcld communication + * + * Copyright (c) 2012 Red Hat, Inc. + * Author(s): Jeff Layton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _NFSD_CLD_H +#define _NFSD_CLD_H + +/* latest upcall version available */ +#define CLD_UPCALL_VERSION 1 + +/* defined by RFC3530 */ +#define NFS4_OPAQUE_LIMIT 1024 + +enum cld_command { + Cld_Create, /* create a record for this cm_id */ + Cld_Remove, /* remove record of this cm_id */ + Cld_Check, /* is this cm_id allowed? */ + Cld_GraceDone, /* grace period is complete */ +}; + +/* representation of long-form NFSv4 client ID */ +struct cld_name { + uint16_t cn_len; /* length of cm_id */ + unsigned char cn_id[NFS4_OPAQUE_LIMIT]; /* client-provided */ +} __attribute__((packed)); + +/* message struct for communication with userspace */ +struct cld_msg { + uint8_t cm_vers; /* upcall version */ + uint8_t cm_cmd; /* upcall command */ + int16_t cm_status; /* return code */ + uint32_t cm_xid; /* transaction id */ + union { + int64_t cm_gracetime; /* grace period start time */ + struct cld_name cm_name; + } __attribute__((packed)) cm_u; +} __attribute__((packed)); + +#endif /* !_NFSD_CLD_H */ -- cgit v1.2.3-70-g09d2 From f3a71a6eb13b71cc8a3dc5b6e5692e3db66b92f0 Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Tue, 13 Mar 2012 22:03:52 +0400 Subject: max17042: Add POR init procedure from Maxim appnote Add power on reset (POR) init procedure defined by the maxim appnote. Using this procedure ensures that the part is configured/initialized correctly at POR and improves early accuracy of the fuel gauge and informs the fuel gauge with the battery characterization parameters. The battery characterization parameters come from the maxim characterization procedure. Signed-off-by: Ramakrishna Pallala Signed-off-by: Dirk Brandewie Signed-off-by: Anton Vorontsov --- drivers/power/max17042_battery.c | 386 ++++++++++++++++++++++++++++++++- include/linux/power/max17042_battery.h | 56 +++++ 2 files changed, 432 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c index 86acee2f988..fde7ccd6295 100644 --- a/drivers/power/max17042_battery.c +++ b/drivers/power/max17042_battery.c @@ -26,14 +26,40 @@ #include #include #include +#include #include #include #include +/* Status register bits */ +#define STATUS_POR_BIT (1 << 1) +#define STATUS_BST_BIT (1 << 3) +#define STATUS_VMN_BIT (1 << 8) +#define STATUS_TMN_BIT (1 << 9) +#define STATUS_SMN_BIT (1 << 10) +#define STATUS_BI_BIT (1 << 11) +#define STATUS_VMX_BIT (1 << 12) +#define STATUS_TMX_BIT (1 << 13) +#define STATUS_SMX_BIT (1 << 14) +#define STATUS_BR_BIT (1 << 15) + +#define VFSOC0_LOCK 0x0000 +#define VFSOC0_UNLOCK 0x0080 +#define MODEL_UNLOCK1 0X0059 +#define MODEL_UNLOCK2 0X00C4 +#define MODEL_LOCK1 0X0000 +#define MODEL_LOCK2 0X0000 + +#define dQ_ACC_DIV 0x4 +#define dP_ACC_100 0x1900 +#define dP_ACC_200 0x3200 + struct max17042_chip { struct i2c_client *client; struct power_supply battery; struct max17042_platform_data *pdata; + struct work_struct work; + int init_complete; }; static int max17042_write_reg(struct i2c_client *client, u8 reg, u16 value) @@ -87,6 +113,9 @@ static int max17042_get_property(struct power_supply *psy, struct max17042_chip, battery); int ret; + if (!chip->init_complete) + return -EAGAIN; + switch (psp) { case POWER_SUPPLY_PROP_PRESENT: ret = max17042_read_reg(chip->client, MAX17042_STATUS); @@ -210,12 +239,343 @@ static int max17042_get_property(struct power_supply *psy, return 0; } +static int max17042_write_verify_reg(struct i2c_client *client, + u8 reg, u16 value) +{ + int retries = 8; + int ret; + u16 read_value; + + do { + ret = i2c_smbus_write_word_data(client, reg, value); + read_value = max17042_read_reg(client, reg); + if (read_value != value) { + ret = -EIO; + retries--; + } + } while (retries && read_value != value); + + if (ret < 0) + dev_err(&client->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static inline void max17042_override_por( + struct i2c_client *client, u8 reg, u16 value) +{ + if (value) + max17042_write_reg(client, reg, value); +} + +static inline void max10742_unlock_model(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + max17042_write_reg(client, MAX17042_MLOCKReg1, MODEL_UNLOCK1); + max17042_write_reg(client, MAX17042_MLOCKReg2, MODEL_UNLOCK2); +} + +static inline void max10742_lock_model(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + max17042_write_reg(client, MAX17042_MLOCKReg1, MODEL_LOCK1); + max17042_write_reg(client, MAX17042_MLOCKReg2, MODEL_LOCK2); +} + +static inline void max17042_write_model_data(struct max17042_chip *chip, + u8 addr, int size) +{ + struct i2c_client *client = chip->client; + int i; + for (i = 0; i < size; i++) + max17042_write_reg(client, addr + i, + chip->pdata->config_data->cell_char_tbl[i]); +} + +static inline void max17042_read_model_data(struct max17042_chip *chip, + u8 addr, u16 *data, int size) +{ + struct i2c_client *client = chip->client; + int i; + + for (i = 0; i < size; i++) + data[i] = max17042_read_reg(client, addr + i); +} + +static inline int max17042_model_data_compare(struct max17042_chip *chip, + u16 *data1, u16 *data2, int size) +{ + int i; + + if (memcmp(data1, data2, size)) { + dev_err(&chip->client->dev, "%s compare failed\n", __func__); + for (i = 0; i < size; i++) + dev_info(&chip->client->dev, "0x%x, 0x%x", + data1[i], data2[i]); + dev_info(&chip->client->dev, "\n"); + return -EINVAL; + } + return 0; +} + +static int max17042_init_model(struct max17042_chip *chip) +{ + int ret; + int table_size = + sizeof(chip->pdata->config_data->cell_char_tbl)/sizeof(u16); + u16 *temp_data; + + temp_data = kzalloc(table_size, GFP_KERNEL); + if (!temp_data) + return -ENOMEM; + + max10742_unlock_model(chip); + max17042_write_model_data(chip, MAX17042_MODELChrTbl, + table_size); + max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data, + table_size); + + ret = max17042_model_data_compare( + chip, + chip->pdata->config_data->cell_char_tbl, + temp_data, + table_size); + + max10742_lock_model(chip); + kfree(temp_data); + + return ret; +} + +static int max17042_verify_model_lock(struct max17042_chip *chip) +{ + int i; + int table_size = + sizeof(chip->pdata->config_data->cell_char_tbl); + u16 *temp_data; + int ret = 0; + + temp_data = kzalloc(table_size, GFP_KERNEL); + if (!temp_data) + return -ENOMEM; + + max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data, + table_size); + for (i = 0; i < table_size; i++) + if (temp_data[i]) + ret = -EINVAL; + + kfree(temp_data); + return ret; +} + +static void max17042_write_config_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_reg(chip->client, MAX17042_CONFIG, config->config); + max17042_write_reg(chip->client, MAX17042_LearnCFG, config->learn_cfg); + max17042_write_reg(chip->client, MAX17042_FilterCFG, + config->filter_cfg); + max17042_write_reg(chip->client, MAX17042_RelaxCFG, config->relax_cfg); +} + +static void max17042_write_custom_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_verify_reg(chip->client, MAX17042_RCOMP0, + config->rcomp0); + max17042_write_verify_reg(chip->client, MAX17042_TempCo, + config->tcompc0); + max17042_write_reg(chip->client, MAX17042_EmptyTempCo, + config->empty_tempco); + max17042_write_verify_reg(chip->client, MAX17042_K_empty0, + config->kempty0); + max17042_write_verify_reg(chip->client, MAX17042_ICHGTerm, + config->ichgt_term); +} + +static void max17042_update_capacity_regs(struct max17042_chip *chip) +{ + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_write_verify_reg(chip->client, MAX17042_FullCAP, + config->fullcap); + max17042_write_reg(chip->client, MAX17042_DesignCap, + config->design_cap); + max17042_write_verify_reg(chip->client, MAX17042_FullCAPNom, + config->fullcapnom); +} + +static void max17042_reset_vfsoc0_reg(struct max17042_chip *chip) +{ + u16 vfSoc; + + vfSoc = max17042_read_reg(chip->client, MAX17042_VFSOC); + max17042_write_reg(chip->client, MAX17042_VFSOC0Enable, VFSOC0_UNLOCK); + max17042_write_verify_reg(chip->client, MAX17042_VFSOC0, vfSoc); + max17042_write_reg(chip->client, MAX17042_VFSOC0Enable, VFSOC0_LOCK); +} + +static void max17042_load_new_capacity_params(struct max17042_chip *chip) +{ + u16 full_cap0, rep_cap, dq_acc, vfSoc; + u32 rem_cap; + + struct max17042_config_data *config = chip->pdata->config_data; + + full_cap0 = max17042_read_reg(chip->client, MAX17042_FullCAP0); + vfSoc = max17042_read_reg(chip->client, MAX17042_VFSOC); + + /* fg_vfSoc needs to shifted by 8 bits to get the + * perc in 1% accuracy, to get the right rem_cap multiply + * full_cap0, fg_vfSoc and devide by 100 + */ + rem_cap = ((vfSoc >> 8) * full_cap0) / 100; + max17042_write_verify_reg(chip->client, MAX17042_RemCap, (u16)rem_cap); + + rep_cap = (u16)rem_cap; + max17042_write_verify_reg(chip->client, MAX17042_RepCap, rep_cap); + + /* Write dQ_acc to 200% of Capacity and dP_acc to 200% */ + dq_acc = config->fullcap / dQ_ACC_DIV; + max17042_write_verify_reg(chip->client, MAX17042_dQacc, dq_acc); + max17042_write_verify_reg(chip->client, MAX17042_dPacc, dP_ACC_200); + + max17042_write_verify_reg(chip->client, MAX17042_FullCAP, + config->fullcap); + max17042_write_reg(chip->client, MAX17042_DesignCap, + config->design_cap); + max17042_write_verify_reg(chip->client, MAX17042_FullCAPNom, + config->fullcapnom); +} + +/* + * Block write all the override values coming from platform data. + * This function MUST be called before the POR initialization proceedure + * specified by maxim. + */ +static inline void max17042_override_por_values(struct max17042_chip *chip) +{ + struct i2c_client *client = chip->client; + struct max17042_config_data *config = chip->pdata->config_data; + + max17042_override_por(client, MAX17042_TGAIN, config->tgain); + max17042_override_por(client, MAx17042_TOFF, config->toff); + max17042_override_por(client, MAX17042_CGAIN, config->cgain); + max17042_override_por(client, MAX17042_COFF, config->coff); + + max17042_override_por(client, MAX17042_VALRT_Th, config->valrt_thresh); + max17042_override_por(client, MAX17042_TALRT_Th, config->talrt_thresh); + max17042_override_por(client, MAX17042_SALRT_Th, + config->soc_alrt_thresh); + max17042_override_por(client, MAX17042_CONFIG, config->config); + max17042_override_por(client, MAX17042_SHDNTIMER, config->shdntimer); + + max17042_override_por(client, MAX17042_DesignCap, config->design_cap); + max17042_override_por(client, MAX17042_ICHGTerm, config->ichgt_term); + + max17042_override_por(client, MAX17042_AtRate, config->at_rate); + max17042_override_por(client, MAX17042_LearnCFG, config->learn_cfg); + max17042_override_por(client, MAX17042_FilterCFG, config->filter_cfg); + max17042_override_por(client, MAX17042_RelaxCFG, config->relax_cfg); + max17042_override_por(client, MAX17042_MiscCFG, config->misc_cfg); + max17042_override_por(client, MAX17042_MaskSOC, config->masksoc); + + max17042_override_por(client, MAX17042_FullCAP, config->fullcap); + max17042_override_por(client, MAX17042_FullCAPNom, config->fullcapnom); + max17042_override_por(client, MAX17042_SOC_empty, config->socempty); + max17042_override_por(client, MAX17042_LAvg_empty, config->lavg_empty); + max17042_override_por(client, MAX17042_dQacc, config->dqacc); + max17042_override_por(client, MAX17042_dPacc, config->dpacc); + + max17042_override_por(client, MAX17042_V_empty, config->vempty); + max17042_override_por(client, MAX17042_TempNom, config->temp_nom); + max17042_override_por(client, MAX17042_TempLim, config->temp_lim); + max17042_override_por(client, MAX17042_FCTC, config->fctc); + max17042_override_por(client, MAX17042_RCOMP0, config->rcomp0); + max17042_override_por(client, MAX17042_TempCo, config->tcompc0); + max17042_override_por(client, MAX17042_EmptyTempCo, + config->empty_tempco); + max17042_override_por(client, MAX17042_K_empty0, config->kempty0); +} + +static int max17042_init_chip(struct max17042_chip *chip) +{ + int ret; + int val; + + max17042_override_por_values(chip); + /* After Power up, the MAX17042 requires 500mS in order + * to perform signal debouncing and initial SOC reporting + */ + msleep(500); + + /* Initialize configaration */ + max17042_write_config_regs(chip); + + /* write cell characterization data */ + ret = max17042_init_model(chip); + if (ret) { + dev_err(&chip->client->dev, "%s init failed\n", + __func__); + return -EIO; + } + max17042_verify_model_lock(chip); + if (ret) { + dev_err(&chip->client->dev, "%s lock verify failed\n", + __func__); + return -EIO; + } + /* write custom parameters */ + max17042_write_custom_regs(chip); + + /* update capacity params */ + max17042_update_capacity_regs(chip); + + /* delay must be atleast 350mS to allow VFSOC + * to be calculated from the new configuration + */ + msleep(350); + + /* reset vfsoc0 reg */ + max17042_reset_vfsoc0_reg(chip); + + /* load new capacity params */ + max17042_load_new_capacity_params(chip); + + /* Init complete, Clear the POR bit */ + val = max17042_read_reg(chip->client, MAX17042_STATUS); + max17042_write_reg(chip->client, MAX17042_STATUS, + val & (~STATUS_POR_BIT)); + return 0; +} + + +static void max17042_init_worker(struct work_struct *work) +{ + struct max17042_chip *chip = container_of(work, + struct max17042_chip, work); + int ret; + + /* Initialize registers according to values from the platform data */ + if (chip->pdata->enable_por_init && chip->pdata->config_data) { + ret = max17042_init_chip(chip); + if (ret) + return; + } + + chip->init_complete = 1; +} + static int __devinit max17042_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct max17042_chip *chip; int ret; + int reg; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EIO; @@ -243,17 +603,9 @@ static int __devinit max17042_probe(struct i2c_client *client, if (chip->pdata->r_sns == 0) chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR; - ret = power_supply_register(&client->dev, &chip->battery); - if (ret) { - dev_err(&client->dev, "failed: power supply register\n"); - kfree(chip); - return ret; - } - - /* Initialize registers according to values from the platform data */ if (chip->pdata->init_data) max17042_set_reg(client, chip->pdata->init_data, - chip->pdata->num_init_data); + chip->pdata->num_init_data); if (!chip->pdata->enable_current_sense) { max17042_write_reg(client, MAX17042_CGAIN, 0x0000); @@ -261,7 +613,21 @@ static int __devinit max17042_probe(struct i2c_client *client, max17042_write_reg(client, MAX17042_LearnCFG, 0x0007); } - return 0; + reg = max17042_read_reg(chip->client, MAX17042_STATUS); + + if (reg & STATUS_POR_BIT) { + INIT_WORK(&chip->work, max17042_init_worker); + schedule_work(&chip->work); + } else { + chip->init_complete = 1; + } + + ret = power_supply_register(&client->dev, &chip->battery); + if (ret) { + dev_err(&client->dev, "failed: power supply register\n"); + kfree(chip); + } + return ret; } static int __devexit max17042_remove(struct i2c_client *client) diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index 67eeada7107..e01b167e66f 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -27,6 +27,8 @@ #define MAX17042_BATTERY_FULL (100) #define MAX17042_DEFAULT_SNS_RESISTOR (10000) +#define MAX17042_CHARACTERIZATION_DATA_SIZE 48 + enum max17042_register { MAX17042_STATUS = 0x00, MAX17042_VALRT_Th = 0x01, @@ -124,10 +126,64 @@ struct max17042_reg_data { u16 data; }; +struct max17042_config_data { + /* External current sense resistor value in milli-ohms */ + u32 cur_sense_val; + + /* A/D measurement */ + u16 tgain; /* 0x2C */ + u16 toff; /* 0x2D */ + u16 cgain; /* 0x2E */ + u16 coff; /* 0x2F */ + + /* Alert / Status */ + u16 valrt_thresh; /* 0x01 */ + u16 talrt_thresh; /* 0x02 */ + u16 soc_alrt_thresh; /* 0x03 */ + u16 config; /* 0x01D */ + u16 shdntimer; /* 0x03F */ + + /* App data */ + u16 design_cap; /* 0x18 */ + u16 ichgt_term; /* 0x1E */ + + /* MG3 config */ + u16 at_rate; /* 0x04 */ + u16 learn_cfg; /* 0x28 */ + u16 filter_cfg; /* 0x29 */ + u16 relax_cfg; /* 0x2A */ + u16 misc_cfg; /* 0x2B */ + u16 masksoc; /* 0x32 */ + + /* MG3 save and restore */ + u16 fullcap; /* 0x10 */ + u16 fullcapnom; /* 0x23 */ + u16 socempty; /* 0x33 */ + u16 lavg_empty; /* 0x36 */ + u16 dqacc; /* 0x45 */ + u16 dpacc; /* 0x46 */ + + /* Cell technology from power_supply.h */ + u16 cell_technology; + + /* Cell Data */ + u16 vempty; /* 0x12 */ + u16 temp_nom; /* 0x24 */ + u16 temp_lim; /* 0x25 */ + u16 fctc; /* 0x37 */ + u16 rcomp0; /* 0x38 */ + u16 tcompc0; /* 0x39 */ + u16 empty_tempco; /* 0x3A */ + u16 kempty0; /* 0x3B */ + u16 cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE]; +} __packed; + struct max17042_platform_data { struct max17042_reg_data *init_data; + struct max17042_config_data *config_data; int num_init_data; /* Number of enties in init_data array */ bool enable_current_sense; + bool enable_por_init; /* Use POR init from Maxim appnote */ /* * R_sns in micro-ohms. -- cgit v1.2.3-70-g09d2 From e39b828f5355e41a8fd24f413fb9dfb81d808397 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Sun, 29 Jan 2012 17:28:18 -0800 Subject: lp8727_charger: Add company name and description Add 'Texas Instruments' because TI acquired National semiconductor at 2011. And the driver information is added in the header file. Signed-off-by: Milo(Woogyom) Kim Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 2 +- drivers/power/lp8727_charger.c | 3 ++- include/linux/lp8727.h | 3 +++ 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 3a8daf85874..97680d8fa23 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -235,7 +235,7 @@ config CHARGER_TWL4030 Say Y here to enable support for TWL4030 Battery Charge Interface. config CHARGER_LP8727 - tristate "National Semiconductor LP8727 charger driver" + tristate "TI/National Semiconductor LP8727 charger driver" depends on I2C help Say Y here to enable support for LP8727 Charger Driver. diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index c53dd1292f8..d23a3bcc74d 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -1,6 +1,7 @@ /* * Driver for LP8727 Micro/Mini USB IC with intergrated charger * + * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor * * This program is free software; you can redistribute it and/or modify @@ -489,7 +490,7 @@ static void __exit lp8727_exit(void) module_init(lp8727_init); module_exit(lp8727_exit); -MODULE_DESCRIPTION("National Semiconductor LP8727 charger driver"); +MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver"); MODULE_AUTHOR ("Woogyom Kim , Daniel Jeong "); MODULE_LICENSE("GPL"); diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h index d21fa2865bf..95371c46dc3 100644 --- a/include/linux/lp8727.h +++ b/include/linux/lp8727.h @@ -1,4 +1,7 @@ /* + * LP8727 Micro/Mini USB IC with intergrated charger + * + * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor * * This program is free software; you can redistribute it and/or modify -- cgit v1.2.3-70-g09d2 From 9b11adc773b45845cc384bf01a623bba628f9f99 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Thu, 26 Jan 2012 22:59:00 -0800 Subject: lp8727_charger: Add description of platform data Add brief description of lp8727_platform_data and lp8727_chg_param. Signed-off-by: Milo(Woogyom) Kim Signed-off-by: Anton Vorontsov --- include/linux/lp8727.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h index 95371c46dc3..a508b4555e6 100644 --- a/include/linux/lp8727.h +++ b/include/linux/lp8727.h @@ -35,13 +35,24 @@ enum lp8727_ichg { ICHG_1000mA, }; +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ struct lp8727_chg_param { - /* end of charge level setting */ enum lp8727_eoc_level eoc_level; - /* charging current */ enum lp8727_ichg ichg; }; +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac, @usb : charging parameters each charger type + */ struct lp8727_platform_data { u8 (*get_batt_present)(void); u16 (*get_batt_level)(void); -- cgit v1.2.3-70-g09d2 From f7bae49aa1247a195a3fe4235edf6811c175bb7b Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Thu, 26 Jan 2012 22:59:08 -0800 Subject: lp8727_charger: Correct typos on the comment intergrated charger -> integrated charger ^ Signed-off-by: Milo(Woogyom) Kim Signed-off-by: Anton Vorontsov --- drivers/power/lp8727_charger.c | 2 +- include/linux/lp8727.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c index d5aab54eda1..815dba37e3e 100644 --- a/drivers/power/lp8727_charger.c +++ b/drivers/power/lp8727_charger.c @@ -1,5 +1,5 @@ /* - * Driver for LP8727 Micro/Mini USB IC with intergrated charger + * Driver for LP8727 Micro/Mini USB IC with integrated charger * * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h index a508b4555e6..ea98c6133d3 100644 --- a/include/linux/lp8727.h +++ b/include/linux/lp8727.h @@ -1,5 +1,5 @@ /* - * LP8727 Micro/Mini USB IC with intergrated charger + * LP8727 Micro/Mini USB IC with integrated charger * * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor -- cgit v1.2.3-70-g09d2 From ed1a230f96eb4610f1f4296b8c3c067389ddf540 Mon Sep 17 00:00:00 2001 From: "Bruce E. Robertson" Date: Mon, 6 Feb 2012 15:59:01 +0000 Subject: Add I2C driver for Summit Microelectronics SMB347 Battery Charger. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver support for the Summit I²C battery charger. This is used in some Intel devices. Signed-off-by: Bruce E. Robertson Signed-off-by: Alan Cox Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/smb347-charger.c | 1294 ++++++++++++++++++++++++++++++++++ include/linux/power/smb347-charger.h | 117 +++ 4 files changed, 1419 insertions(+) create mode 100644 drivers/power/smb347-charger.c create mode 100644 include/linux/power/smb347-charger.h (limited to 'include/linux') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 97680d8fa23..c728d26dca6 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -274,4 +274,11 @@ config CHARGER_MAX8998 Say Y to enable support for the battery charger control sysfs and platform data of MAX8998/LP3974 PMICs. +config CHARGER_SMB347 + tristate "Summit Microelectronics SMB347 Battery Charger" + depends on I2C + help + Say Y to include support for Summit Microelectronics SMB347 + Battery Charger. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e429008eaf1..894710e336f 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o +obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c new file mode 100644 index 00000000000..ce1694d1a36 --- /dev/null +++ b/drivers/power/smb347-charger.c @@ -0,0 +1,1294 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson + * Mika Westerberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Configuration registers. These are mirrored to volatile RAM and can be + * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be + * reloaded from non-volatile registers after POR. + */ +#define CFG_CHARGE_CURRENT 0x00 +#define CFG_CHARGE_CURRENT_FCC_MASK 0xe0 +#define CFG_CHARGE_CURRENT_FCC_SHIFT 5 +#define CFG_CHARGE_CURRENT_PCC_MASK 0x18 +#define CFG_CHARGE_CURRENT_PCC_SHIFT 3 +#define CFG_CHARGE_CURRENT_TC_MASK 0x07 +#define CFG_CURRENT_LIMIT 0x01 +#define CFG_CURRENT_LIMIT_DC_MASK 0xf0 +#define CFG_CURRENT_LIMIT_DC_SHIFT 4 +#define CFG_CURRENT_LIMIT_USB_MASK 0x0f +#define CFG_FLOAT_VOLTAGE 0x03 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK 0xc0 +#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT 6 +#define CFG_STAT 0x05 +#define CFG_STAT_DISABLED BIT(5) +#define CFG_STAT_ACTIVE_HIGH BIT(7) +#define CFG_PIN 0x06 +#define CFG_PIN_EN_CTRL_MASK 0x60 +#define CFG_PIN_EN_CTRL_ACTIVE_HIGH 0x40 +#define CFG_PIN_EN_CTRL_ACTIVE_LOW 0x60 +#define CFG_PIN_EN_APSD_IRQ BIT(1) +#define CFG_PIN_EN_CHARGER_ERROR BIT(2) +#define CFG_THERM 0x07 +#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK 0x03 +#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT 0 +#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK 0x0c +#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2 +#define CFG_THERM_MONITOR_DISABLED BIT(4) +#define CFG_SYSOK 0x08 +#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2) +#define CFG_OTHER 0x09 +#define CFG_OTHER_RID_MASK 0xc0 +#define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0 +#define CFG_OTG 0x0a +#define CFG_OTG_TEMP_THRESHOLD_MASK 0x30 +#define CFG_OTG_TEMP_THRESHOLD_SHIFT 4 +#define CFG_OTG_CC_COMPENSATION_MASK 0xc0 +#define CFG_OTG_CC_COMPENSATION_SHIFT 6 +#define CFG_TEMP_LIMIT 0x0b +#define CFG_TEMP_LIMIT_SOFT_HOT_MASK 0x03 +#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT 0 +#define CFG_TEMP_LIMIT_SOFT_COLD_MASK 0x0c +#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT 2 +#define CFG_TEMP_LIMIT_HARD_HOT_MASK 0x30 +#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT 4 +#define CFG_TEMP_LIMIT_HARD_COLD_MASK 0xc0 +#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT 6 +#define CFG_FAULT_IRQ 0x0c +#define CFG_FAULT_IRQ_DCIN_UV BIT(2) +#define CFG_STATUS_IRQ 0x0d +#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER BIT(4) +#define CFG_ADDRESS 0x0e + +/* Command registers */ +#define CMD_A 0x30 +#define CMD_A_CHG_ENABLED BIT(1) +#define CMD_A_SUSPEND_ENABLED BIT(2) +#define CMD_A_ALLOW_WRITE BIT(7) +#define CMD_B 0x31 +#define CMD_C 0x33 + +/* Interrupt Status registers */ +#define IRQSTAT_A 0x35 +#define IRQSTAT_C 0x37 +#define IRQSTAT_C_TERMINATION_STAT BIT(0) +#define IRQSTAT_C_TERMINATION_IRQ BIT(1) +#define IRQSTAT_C_TAPER_IRQ BIT(3) +#define IRQSTAT_E 0x39 +#define IRQSTAT_E_USBIN_UV_STAT BIT(0) +#define IRQSTAT_E_USBIN_UV_IRQ BIT(1) +#define IRQSTAT_E_DCIN_UV_STAT BIT(4) +#define IRQSTAT_E_DCIN_UV_IRQ BIT(5) +#define IRQSTAT_F 0x3a + +/* Status registers */ +#define STAT_A 0x3b +#define STAT_A_FLOAT_VOLTAGE_MASK 0x3f +#define STAT_B 0x3c +#define STAT_C 0x3d +#define STAT_C_CHG_ENABLED BIT(0) +#define STAT_C_CHG_MASK 0x06 +#define STAT_C_CHG_SHIFT 1 +#define STAT_C_CHARGER_ERROR BIT(6) +#define STAT_E 0x3f + +/** + * struct smb347_charger - smb347 charger instance + * @lock: protects concurrent access to online variables + * @client: pointer to i2c client + * @mains: power_supply instance for AC/DC power + * @usb: power_supply instance for USB power + * @battery: power_supply instance for battery + * @mains_online: is AC/DC input connected + * @usb_online: is USB input connected + * @charging_enabled: is charging enabled + * @dentry: for debugfs + * @pdata: pointer to platform data + */ +struct smb347_charger { + struct mutex lock; + struct i2c_client *client; + struct power_supply mains; + struct power_supply usb; + struct power_supply battery; + bool mains_online; + bool usb_online; + bool charging_enabled; + struct dentry *dentry; + const struct smb347_charger_platform_data *pdata; +}; + +/* Fast charge current in uA */ +static const unsigned int fcc_tbl[] = { + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Pre-charge current in uA */ +static const unsigned int pcc_tbl[] = { + 100000, + 150000, + 200000, + 250000, +}; + +/* Termination current in uA */ +static const unsigned int tc_tbl[] = { + 37500, + 50000, + 100000, + 150000, + 200000, + 250000, + 500000, + 600000, +}; + +/* Input current limit in uA */ +static const unsigned int icl_tbl[] = { + 300000, + 500000, + 700000, + 900000, + 1200000, + 1500000, + 1800000, + 2000000, + 2200000, + 2500000, +}; + +/* Charge current compensation in uA */ +static const unsigned int ccc_tbl[] = { + 250000, + 700000, + 900000, + 1200000, +}; + +/* Convert register value to current using lookup table */ +static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val) +{ + if (val >= size) + return -EINVAL; + return tbl[val]; +} + +/* Convert current to register value using lookup table */ +static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val) +{ + size_t i; + + for (i = 0; i < size; i++) + if (val < tbl[i]) + break; + return i > 0 ? i - 1 : -EINVAL; +} + +static int smb347_read(struct smb347_charger *smb, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(smb->client, reg); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to read reg 0x%x: %d\n", + reg, ret); + return ret; +} + +static int smb347_write(struct smb347_charger *smb, u8 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(smb->client, reg, val); + if (ret < 0) + dev_warn(&smb->client->dev, "failed to write reg 0x%x: %d\n", + reg, ret); + return ret; +} + +/** + * smb347_update_status - updates the charging status + * @smb: pointer to smb347 charger instance + * + * Function checks status of the charging and updates internal state + * accordingly. Returns %0 if there is no change in status, %1 if the + * status has changed and negative errno in case of failure. + */ +static int smb347_update_status(struct smb347_charger *smb) +{ + bool usb = false; + bool dc = false; + int ret; + + ret = smb347_read(smb, IRQSTAT_E); + if (ret < 0) + return ret; + + /* + * Dc and usb are set depending on whether they are enabled in + * platform data _and_ whether corresponding undervoltage is set. + */ + if (smb->pdata->use_mains) + dc = !(ret & IRQSTAT_E_DCIN_UV_STAT); + if (smb->pdata->use_usb) + usb = !(ret & IRQSTAT_E_USBIN_UV_STAT); + + mutex_lock(&smb->lock); + ret = smb->mains_online != dc || smb->usb_online != usb; + smb->mains_online = dc; + smb->usb_online = usb; + mutex_unlock(&smb->lock); + + return ret; +} + +/* + * smb347_is_online - returns whether input power source is connected + * @smb: pointer to smb347 charger instance + * + * Returns %true if input power source is connected. Note that this is + * dependent on what platform has configured for usable power sources. For + * example if USB is disabled, this will return %false even if the USB + * cable is connected. + */ +static bool smb347_is_online(struct smb347_charger *smb) +{ + bool ret; + + mutex_lock(&smb->lock); + ret = smb->usb_online || smb->mains_online; + mutex_unlock(&smb->lock); + + return ret; +} + +/** + * smb347_charging_status - returns status of charging + * @smb: pointer to smb347 charger instance + * + * Function returns charging status. %0 means no charging is in progress, + * %1 means pre-charging, %2 fast-charging and %3 taper-charging. + */ +static int smb347_charging_status(struct smb347_charger *smb) +{ + int ret; + + if (!smb347_is_online(smb)) + return 0; + + ret = smb347_read(smb, STAT_C); + if (ret < 0) + return 0; + + return (ret & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT; +} + +static int smb347_charging_set(struct smb347_charger *smb, bool enable) +{ + int ret = 0; + + if (smb->pdata->enable_control != SMB347_CHG_ENABLE_SW) { + dev_dbg(&smb->client->dev, + "charging enable/disable in SW disabled\n"); + return 0; + } + + mutex_lock(&smb->lock); + if (smb->charging_enabled != enable) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto out; + + smb->charging_enabled = enable; + + if (enable) + ret |= CMD_A_CHG_ENABLED; + else + ret &= ~CMD_A_CHG_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + } +out: + mutex_unlock(&smb->lock); + return ret; +} + +static inline int smb347_charging_enable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, true); +} + +static inline int smb347_charging_disable(struct smb347_charger *smb) +{ + return smb347_charging_set(smb, false); +} + +static int smb347_update_online(struct smb347_charger *smb) +{ + int ret; + + /* + * Depending on whether valid power source is connected or not, we + * disable or enable the charging. We do it manually because it + * depends on how the platform has configured the valid inputs. + */ + if (smb347_is_online(smb)) { + ret = smb347_charging_enable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to enable charging\n"); + } else { + ret = smb347_charging_disable(smb); + if (ret < 0) + dev_err(&smb->client->dev, + "failed to disable charging\n"); + } + + return ret; +} + +static int smb347_set_charge_current(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CHARGE_CURRENT); + if (ret < 0) + return ret; + + if (smb->pdata->max_charge_current) { + val = current_to_hw(fcc_tbl, ARRAY_SIZE(fcc_tbl), + smb->pdata->max_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_FCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_FCC_SHIFT; + } + + if (smb->pdata->pre_charge_current) { + val = current_to_hw(pcc_tbl, ARRAY_SIZE(pcc_tbl), + smb->pdata->pre_charge_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_PCC_MASK; + ret |= val << CFG_CHARGE_CURRENT_PCC_SHIFT; + } + + if (smb->pdata->termination_current) { + val = current_to_hw(tc_tbl, ARRAY_SIZE(tc_tbl), + smb->pdata->termination_current); + if (val < 0) + return val; + + ret &= ~CFG_CHARGE_CURRENT_TC_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CHARGE_CURRENT, ret); +} + +static int smb347_set_current_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_CURRENT_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->mains_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->mains_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_DC_MASK; + ret |= val << CFG_CURRENT_LIMIT_DC_SHIFT; + } + + if (smb->pdata->usb_hc_current_limit) { + val = current_to_hw(icl_tbl, ARRAY_SIZE(icl_tbl), + smb->pdata->usb_hc_current_limit); + if (val < 0) + return val; + + ret &= ~CFG_CURRENT_LIMIT_USB_MASK; + ret |= val; + } + + return smb347_write(smb, CFG_CURRENT_LIMIT, ret); +} + +static int smb347_set_voltage_limits(struct smb347_charger *smb) +{ + int ret, val; + + ret = smb347_read(smb, CFG_FLOAT_VOLTAGE); + if (ret < 0) + return ret; + + if (smb->pdata->pre_to_fast_voltage) { + val = smb->pdata->pre_to_fast_voltage; + + /* uV */ + val = clamp_val(val, 2400000, 3000000) - 2400000; + val /= 200000; + + ret &= ~CFG_FLOAT_VOLTAGE_THRESHOLD_MASK; + ret |= val << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT; + } + + if (smb->pdata->max_charge_voltage) { + val = smb->pdata->max_charge_voltage; + + /* uV */ + val = clamp_val(val, 3500000, 4500000) - 3500000; + val /= 20000; + + ret |= val; + } + + return smb347_write(smb, CFG_FLOAT_VOLTAGE, ret); +} + +static int smb347_set_temp_limits(struct smb347_charger *smb) +{ + bool enable_therm_monitor = false; + int ret, val; + + if (smb->pdata->chip_temp_threshold) { + val = smb->pdata->chip_temp_threshold; + + /* degree C */ + val = clamp_val(val, 100, 130) - 100; + val /= 10; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_TEMP_THRESHOLD_MASK; + ret |= val << CFG_OTG_TEMP_THRESHOLD_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + ret = smb347_read(smb, CFG_TEMP_LIMIT); + if (ret < 0) + return ret; + + if (smb->pdata->soft_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_cold_temp_limit; + + val = clamp_val(val, 0, 15); + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_SOFT_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->soft_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->soft_hot_temp_limit; + + val = clamp_val(val, 40, 55) - 40; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_SOFT_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_cold_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_cold_temp_limit; + + val = clamp_val(val, -5, 10) + 5; + val /= 5; + /* this goes from higher to lower so invert the value */ + val = ~val & 0x3; + + ret &= ~CFG_TEMP_LIMIT_HARD_COLD_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT; + + enable_therm_monitor = true; + } + + if (smb->pdata->hard_hot_temp_limit != SMB347_TEMP_USE_DEFAULT) { + val = smb->pdata->hard_hot_temp_limit; + + val = clamp_val(val, 50, 65) - 50; + val /= 5; + + ret &= ~CFG_TEMP_LIMIT_HARD_HOT_MASK; + ret |= val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT; + + enable_therm_monitor = true; + } + + ret = smb347_write(smb, CFG_TEMP_LIMIT, ret); + if (ret < 0) + return ret; + + /* + * If any of the temperature limits are set, we also enable the + * thermistor monitoring. + * + * When soft limits are hit, the device will start to compensate + * current and/or voltage depending on the configuration. + * + * When hard limit is hit, the device will suspend charging + * depending on the configuration. + */ + if (enable_therm_monitor) { + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_MONITOR_DISABLED; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->suspend_on_hard_temp_limit) { + ret = smb347_read(smb, CFG_SYSOK); + if (ret < 0) + return ret; + + ret &= ~CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED; + + ret = smb347_write(smb, CFG_SYSOK, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->soft_temp_limit_compensation != + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT) { + val = smb->pdata->soft_temp_limit_compensation & 0x3; + + ret = smb347_read(smb, CFG_THERM); + if (ret < 0) + return ret; + + ret &= ~CFG_THERM_SOFT_HOT_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT; + + ret &= ~CFG_THERM_SOFT_COLD_COMPENSATION_MASK; + ret |= val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_THERM, ret); + if (ret < 0) + return ret; + } + + if (smb->pdata->charge_current_compensation) { + val = current_to_hw(ccc_tbl, ARRAY_SIZE(ccc_tbl), + smb->pdata->charge_current_compensation); + if (val < 0) + return val; + + ret = smb347_read(smb, CFG_OTG); + if (ret < 0) + return ret; + + ret &= ~CFG_OTG_CC_COMPENSATION_MASK; + ret |= (val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT; + + ret = smb347_write(smb, CFG_OTG, ret); + if (ret < 0) + return ret; + } + + return ret; +} + +/* + * smb347_set_writable - enables/disables writing to non-volatile registers + * @smb: pointer to smb347 charger instance + * + * You can enable/disable writing to the non-volatile configuration + * registers by calling this function. + * + * Returns %0 on success and negative errno in case of failure. + */ +static int smb347_set_writable(struct smb347_charger *smb, bool writable) +{ + int ret; + + ret = smb347_read(smb, CMD_A); + if (ret < 0) + return ret; + + if (writable) + ret |= CMD_A_ALLOW_WRITE; + else + ret &= ~CMD_A_ALLOW_WRITE; + + return smb347_write(smb, CMD_A, ret); +} + +static int smb347_hw_init(struct smb347_charger *smb) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Program the platform specific configuration values to the device + * first. + */ + ret = smb347_set_charge_current(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_current_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_voltage_limits(smb); + if (ret < 0) + goto fail; + + ret = smb347_set_temp_limits(smb); + if (ret < 0) + goto fail; + + /* If USB charging is disabled we put the USB in suspend mode */ + if (!smb->pdata->use_usb) { + ret = smb347_read(smb, CMD_A); + if (ret < 0) + goto fail; + + ret |= CMD_A_SUSPEND_ENABLED; + + ret = smb347_write(smb, CMD_A, ret); + if (ret < 0) + goto fail; + } + + ret = smb347_read(smb, CFG_OTHER); + if (ret < 0) + goto fail; + + /* + * If configured by platform data, we enable hardware Auto-OTG + * support for driving VBUS. Otherwise we disable it. + */ + ret &= ~CFG_OTHER_RID_MASK; + if (smb->pdata->use_usb_otg) + ret |= CFG_OTHER_RID_ENABLED_AUTO_OTG; + + ret = smb347_write(smb, CFG_OTHER, ret); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + /* + * Make the charging functionality controllable by a write to the + * command register unless pin control is specified in the platform + * data. + */ + ret &= ~CFG_PIN_EN_CTRL_MASK; + + switch (smb->pdata->enable_control) { + case SMB347_CHG_ENABLE_SW: + /* Do nothing, 0 means i2c control */ + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_LOW: + ret |= CFG_PIN_EN_CTRL_ACTIVE_LOW; + break; + case SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH: + ret |= CFG_PIN_EN_CTRL_ACTIVE_HIGH; + break; + } + + /* Disable Automatic Power Source Detection (APSD) interrupt. */ + ret &= ~CFG_PIN_EN_APSD_IRQ; + + ret = smb347_write(smb, CFG_PIN, ret); + if (ret < 0) + goto fail; + + ret = smb347_update_status(smb); + if (ret < 0) + goto fail; + + ret = smb347_update_online(smb); + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static irqreturn_t smb347_interrupt(int irq, void *data) +{ + struct smb347_charger *smb = data; + int stat_c, irqstat_e, irqstat_c; + irqreturn_t ret = IRQ_NONE; + + stat_c = smb347_read(smb, STAT_C); + if (stat_c < 0) { + dev_warn(&smb->client->dev, "reading STAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_c = smb347_read(smb, IRQSTAT_C); + if (irqstat_c < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_C failed\n"); + return IRQ_NONE; + } + + irqstat_e = smb347_read(smb, IRQSTAT_E); + if (irqstat_e < 0) { + dev_warn(&smb->client->dev, "reading IRQSTAT_E failed\n"); + return IRQ_NONE; + } + + /* + * If we get charger error we report the error back to user and + * disable charging. + */ + if (stat_c & STAT_C_CHARGER_ERROR) { + dev_err(&smb->client->dev, + "error in charger, disabling charging\n"); + + smb347_charging_disable(smb); + power_supply_changed(&smb->battery); + + ret = IRQ_HANDLED; + } + + /* + * If we reached the termination current the battery is charged and + * we can update the status now. Charging is automatically + * disabled by the hardware. + */ + if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) { + if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) + power_supply_changed(&smb->battery); + ret = IRQ_HANDLED; + } + + /* + * If we got an under voltage interrupt it means that AC/USB input + * was connected or disconnected. + */ + if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) { + if (smb347_update_status(smb) > 0) { + smb347_update_online(smb); + power_supply_changed(&smb->mains); + power_supply_changed(&smb->usb); + } + ret = IRQ_HANDLED; + } + + return ret; +} + +static int smb347_irq_set(struct smb347_charger *smb, bool enable) +{ + int ret; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + return ret; + + /* + * Enable/disable interrupts for: + * - under voltage + * - termination current reached + * - charger error + */ + if (enable) { + ret = smb347_write(smb, CFG_FAULT_IRQ, CFG_FAULT_IRQ_DCIN_UV); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, + CFG_STATUS_IRQ_TERMINATION_OR_TAPER); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret |= CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } else { + ret = smb347_write(smb, CFG_FAULT_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_write(smb, CFG_STATUS_IRQ, 0); + if (ret < 0) + goto fail; + + ret = smb347_read(smb, CFG_PIN); + if (ret < 0) + goto fail; + + ret &= ~CFG_PIN_EN_CHARGER_ERROR; + + ret = smb347_write(smb, CFG_PIN, ret); + } + +fail: + smb347_set_writable(smb, false); + return ret; +} + +static inline int smb347_irq_enable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, true); +} + +static inline int smb347_irq_disable(struct smb347_charger *smb) +{ + return smb347_irq_set(smb, false); +} + +static int smb347_irq_init(struct smb347_charger *smb) +{ + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret, irq = gpio_to_irq(pdata->irq_gpio); + + ret = gpio_request_one(pdata->irq_gpio, GPIOF_IN, smb->client->name); + if (ret < 0) + goto fail; + + ret = request_threaded_irq(irq, NULL, smb347_interrupt, + IRQF_TRIGGER_FALLING, smb->client->name, + smb); + if (ret < 0) + goto fail_gpio; + + ret = smb347_set_writable(smb, true); + if (ret < 0) + goto fail_irq; + + /* + * Configure the STAT output to be suitable for interrupts: disable + * all other output (except interrupts) and make it active low. + */ + ret = smb347_read(smb, CFG_STAT); + if (ret < 0) + goto fail_readonly; + + ret &= ~CFG_STAT_ACTIVE_HIGH; + ret |= CFG_STAT_DISABLED; + + ret = smb347_write(smb, CFG_STAT, ret); + if (ret < 0) + goto fail_readonly; + + ret = smb347_irq_enable(smb); + if (ret < 0) + goto fail_readonly; + + smb347_set_writable(smb, false); + smb->client->irq = irq; + return 0; + +fail_readonly: + smb347_set_writable(smb, false); +fail_irq: + free_irq(irq, smb); +fail_gpio: + gpio_free(pdata->irq_gpio); +fail: + smb->client->irq = 0; + return ret; +} + +static int smb347_mains_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, mains); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->mains_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_mains_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_usb_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, usb); + + if (prop == POWER_SUPPLY_PROP_ONLINE) { + val->intval = smb->usb_online; + return 0; + } + return -EINVAL; +} + +static enum power_supply_property smb347_usb_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int smb347_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct smb347_charger *smb = + container_of(psy, struct smb347_charger, battery); + const struct smb347_charger_platform_data *pdata = smb->pdata; + int ret; + + ret = smb347_update_status(smb); + if (ret < 0) + return ret; + + switch (prop) { + case POWER_SUPPLY_PROP_STATUS: + if (!smb347_is_online(smb)) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + if (smb347_charging_status(smb)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (!smb347_is_online(smb)) + return -ENODATA; + + /* + * We handle trickle and pre-charging the same, and taper + * and none the same. + */ + switch (smb347_charging_status(smb)) { + case 1: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case 2: + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = pdata->battery_info.technology; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = pdata->battery_info.voltage_min_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = pdata->battery_info.voltage_max_design; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + ret = smb347_read(smb, STAT_A); + if (ret < 0) + return ret; + + ret &= STAT_A_FLOAT_VOLTAGE_MASK; + if (ret > 0x3d) + ret = 0x3d; + + val->intval = 3500000 + ret * 20000; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (!smb347_is_online(smb)) + return -ENODATA; + + ret = smb347_read(smb, STAT_B); + if (ret < 0) + return ret; + + /* + * The current value is composition of FCC and PCC values + * and we can detect which table to use from bit 5. + */ + if (ret & 0x20) { + val->intval = hw_to_current(fcc_tbl, + ARRAY_SIZE(fcc_tbl), + ret & 7); + } else { + ret >>= 3; + val->intval = hw_to_current(pcc_tbl, + ARRAY_SIZE(pcc_tbl), + ret & 7); + } + break; + + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = pdata->battery_info.charge_full_design; + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = pdata->battery_info.name; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property smb347_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_MODEL_NAME, +}; + +static int smb347_debugfs_show(struct seq_file *s, void *data) +{ + struct smb347_charger *smb = s->private; + int ret; + u8 reg; + + seq_printf(s, "Control registers:\n"); + seq_printf(s, "==================\n"); + for (reg = CFG_CHARGE_CURRENT; reg <= CFG_ADDRESS; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Command registers:\n"); + seq_printf(s, "==================\n"); + ret = smb347_read(smb, CMD_A); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_A, ret); + ret = smb347_read(smb, CMD_B); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_B, ret); + ret = smb347_read(smb, CMD_C); + seq_printf(s, "0x%02x:\t0x%02x\n", CMD_C, ret); + seq_printf(s, "\n"); + + seq_printf(s, "Interrupt status registers:\n"); + seq_printf(s, "===========================\n"); + for (reg = IRQSTAT_A; reg <= IRQSTAT_F; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + seq_printf(s, "\n"); + + seq_printf(s, "Status registers:\n"); + seq_printf(s, "=================\n"); + for (reg = STAT_A; reg <= STAT_E; reg++) { + ret = smb347_read(smb, reg); + seq_printf(s, "0x%02x:\t0x%02x\n", reg, ret); + } + + return 0; +} + +static int smb347_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, smb347_debugfs_show, inode->i_private); +} + +static const struct file_operations smb347_debugfs_fops = { + .open = smb347_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int smb347_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static char *battery[] = { "smb347-battery" }; + const struct smb347_charger_platform_data *pdata; + struct device *dev = &client->dev; + struct smb347_charger *smb; + int ret; + + pdata = dev->platform_data; + if (!pdata) + return -EINVAL; + + if (!pdata->use_mains && !pdata->use_usb) + return -EINVAL; + + smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL); + if (!smb) + return -ENOMEM; + + i2c_set_clientdata(client, smb); + + mutex_init(&smb->lock); + smb->client = client; + smb->pdata = pdata; + + ret = smb347_hw_init(smb); + if (ret < 0) + return ret; + + smb->mains.name = "smb347-mains"; + smb->mains.type = POWER_SUPPLY_TYPE_MAINS; + smb->mains.get_property = smb347_mains_get_property; + smb->mains.properties = smb347_mains_properties; + smb->mains.num_properties = ARRAY_SIZE(smb347_mains_properties); + smb->mains.supplied_to = battery; + smb->mains.num_supplicants = ARRAY_SIZE(battery); + + smb->usb.name = "smb347-usb"; + smb->usb.type = POWER_SUPPLY_TYPE_USB; + smb->usb.get_property = smb347_usb_get_property; + smb->usb.properties = smb347_usb_properties; + smb->usb.num_properties = ARRAY_SIZE(smb347_usb_properties); + smb->usb.supplied_to = battery; + smb->usb.num_supplicants = ARRAY_SIZE(battery); + + smb->battery.name = "smb347-battery"; + smb->battery.type = POWER_SUPPLY_TYPE_BATTERY; + smb->battery.get_property = smb347_battery_get_property; + smb->battery.properties = smb347_battery_properties; + smb->battery.num_properties = ARRAY_SIZE(smb347_battery_properties); + + ret = power_supply_register(dev, &smb->mains); + if (ret < 0) + return ret; + + ret = power_supply_register(dev, &smb->usb); + if (ret < 0) { + power_supply_unregister(&smb->mains); + return ret; + } + + ret = power_supply_register(dev, &smb->battery); + if (ret < 0) { + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return ret; + } + + /* + * Interrupt pin is optional. If it is connected, we setup the + * interrupt support here. + */ + if (pdata->irq_gpio >= 0) { + ret = smb347_irq_init(smb); + if (ret < 0) { + dev_warn(dev, "failed to initialize IRQ: %d\n", ret); + dev_warn(dev, "disabling IRQ support\n"); + } + } + + smb->dentry = debugfs_create_file("smb347-regs", S_IRUSR, NULL, smb, + &smb347_debugfs_fops); + return 0; +} + +static int smb347_remove(struct i2c_client *client) +{ + struct smb347_charger *smb = i2c_get_clientdata(client); + + if (!IS_ERR_OR_NULL(smb->dentry)) + debugfs_remove(smb->dentry); + + if (client->irq) { + smb347_irq_disable(smb); + free_irq(client->irq, smb); + gpio_free(smb->pdata->irq_gpio); + } + + power_supply_unregister(&smb->battery); + power_supply_unregister(&smb->usb); + power_supply_unregister(&smb->mains); + return 0; +} + +static const struct i2c_device_id smb347_id[] = { + { "smb347", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, smb347_id); + +static struct i2c_driver smb347_driver = { + .driver = { + .name = "smb347", + }, + .probe = smb347_probe, + .remove = __devexit_p(smb347_remove), + .id_table = smb347_id, +}; + +static int __init smb347_init(void) +{ + return i2c_add_driver(&smb347_driver); +} +module_init(smb347_init); + +static void __exit smb347_exit(void) +{ + i2c_del_driver(&smb347_driver); +} +module_exit(smb347_exit); + +MODULE_AUTHOR("Bruce E. Robertson "); +MODULE_AUTHOR("Mika Westerberg "); +MODULE_DESCRIPTION("SMB347 battery charger driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("i2c:smb347"); diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h new file mode 100644 index 00000000000..b3cb20dab55 --- /dev/null +++ b/include/linux/power/smb347-charger.h @@ -0,0 +1,117 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson + * Mika Westerberg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SMB347_CHARGER_H +#define SMB347_CHARGER_H + +#include +#include + +enum { + /* use the default compensation method */ + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1, + + SMB347_SOFT_TEMP_COMPENSATE_NONE, + SMB347_SOFT_TEMP_COMPENSATE_CURRENT, + SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE, +}; + +/* Use default factory programmed value for hard/soft temperature limit */ +#define SMB347_TEMP_USE_DEFAULT -273 + +/* + * Charging enable can be controlled by software (via i2c) by + * smb347-charger driver or by EN pin (active low/high). + */ +enum smb347_chg_enable { + SMB347_CHG_ENABLE_SW, + SMB347_CHG_ENABLE_PIN_ACTIVE_LOW, + SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH, +}; + +/** + * struct smb347_charger_platform_data - platform data for SMB347 charger + * @battery_info: Information about the battery + * @max_charge_current: maximum current (in uA) the battery can be charged + * @max_charge_voltage: maximum voltage (in uV) the battery can be charged + * @pre_charge_current: current (in uA) to use in pre-charging phase + * @termination_current: current (in uA) used to determine when the + * charging cycle terminates + * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to + * pre-charge to fast charge mode + * @mains_current_limit: maximum input current drawn from AC/DC input (in uA) + * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB + * input + * @chip_temp_threshold: die temperature where device starts limiting charge + * current [%100 - %130] (in degree C) + * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C), + * granularity is 5 deg C. + * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree C), + * granularity is 5 deg C. + * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C), + * granularity is 5 deg C. + * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C), + * granularity is 5 deg C. + * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit + * @soft_temp_limit_compensation: compensation method when soft temperature + * limit is hit + * @charge_current_compensation: current (in uA) for charging compensation + * current when temperature hits soft limits + * @use_mains: AC/DC input can be used + * @use_usb: USB input can be used + * @use_usb_otg: USB OTG output can be used (not implemented yet) + * @irq_gpio: GPIO number used for interrupts (%-1 if not used) + * @enable_control: how charging enable/disable is controlled + * (driver/pin controls) + * + * @use_main, @use_usb, and @use_usb_otg are means to enable/disable + * hardware support for these. This is useful when we want to have for + * example OTG charging controlled via OTG transceiver driver and not by + * the SMB347 hardware. + * + * Hard and soft temperature limit values are given as described in the + * device data sheet and assuming NTC beta value is %3750. Even if this is + * not the case, these values should be used. They can be mapped to the + * corresponding NTC beta values with the help of table %2 in the data + * sheet. So for example if NTC beta is %3375 and we want to program hard + * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50. + * + * If zero value is given in any of the current and voltage values, the + * factory programmed default will be used. For soft/hard temperature + * values, pass in %SMB347_TEMP_USE_DEFAULT instead. + */ +struct smb347_charger_platform_data { + struct power_supply_info battery_info; + unsigned int max_charge_current; + unsigned int max_charge_voltage; + unsigned int pre_charge_current; + unsigned int termination_current; + unsigned int pre_to_fast_voltage; + unsigned int mains_current_limit; + unsigned int usb_hc_current_limit; + unsigned int chip_temp_threshold; + int soft_cold_temp_limit; + int soft_hot_temp_limit; + int hard_cold_temp_limit; + int hard_hot_temp_limit; + bool suspend_on_hard_temp_limit; + unsigned int soft_temp_limit_compensation; + unsigned int charge_current_compensation; + bool use_mains; + bool use_usb; + bool use_usb_otg; + int irq_gpio; + enum smb347_chg_enable enable_control; +}; + +#endif /* SMB347_CHARGER_H */ -- cgit v1.2.3-70-g09d2 From 1668f81159fb72eda2114a9c73a64ffee045cb01 Mon Sep 17 00:00:00 2001 From: Arun Murthy Date: Wed, 29 Feb 2012 21:54:25 +0530 Subject: abx500-chargalg: Add abx500 charging algorithm This is a charging algorithm driver for abx500 variants. It is the central entity for battery driver and is responsible for charging and monitoring the battery driver. It is a hardware independant driver and also monitors other abx500 power supply devices. Signed-off-by: Arun Murthy Acked-by: Linus Walleij Signed-off-by: Anton Vorontsov --- drivers/power/abx500_chargalg.c | 1921 +++++++++++++++++++++++++++++ include/linux/mfd/abx500.h | 273 ++++ include/linux/mfd/abx500/ux500_chargalg.h | 38 + 3 files changed, 2232 insertions(+) create mode 100644 drivers/power/abx500_chargalg.c create mode 100644 include/linux/mfd/abx500/ux500_chargalg.h (limited to 'include/linux') diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c new file mode 100644 index 00000000000..fbb6a1fe97e --- /dev/null +++ b/drivers/power/abx500_chargalg.c @@ -0,0 +1,1921 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charging algorithm driver for abx500 variants + * + * License Terms: GNU General Public License v2 + * Authors: + * Johan Palsson + * Karl Komierowski + * Arun R Murthy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Watchdog kick interval */ +#define CHG_WD_INTERVAL (6 * HZ) + +/* End-of-charge criteria counter */ +#define EOC_COND_CNT 10 + +/* Recharge criteria counter */ +#define RCH_COND_CNT 3 + +#define to_abx500_chargalg_device_info(x) container_of((x), \ + struct abx500_chargalg, chargalg_psy); + +enum abx500_chargers { + NO_CHG, + AC_CHG, + USB_CHG, +}; + +struct abx500_chargalg_charger_info { + enum abx500_chargers conn_chg; + enum abx500_chargers prev_conn_chg; + enum abx500_chargers online_chg; + enum abx500_chargers prev_online_chg; + enum abx500_chargers charger_type; + bool usb_chg_ok; + bool ac_chg_ok; + int usb_volt; + int usb_curr; + int ac_volt; + int ac_curr; + int usb_vset; + int usb_iset; + int ac_vset; + int ac_iset; +}; + +struct abx500_chargalg_suspension_status { + bool suspended_change; + bool ac_suspended; + bool usb_suspended; +}; + +struct abx500_chargalg_battery_data { + int temp; + int volt; + int avg_curr; + int inst_curr; + int percent; +}; + +enum abx500_chargalg_states { + STATE_HANDHELD_INIT, + STATE_HANDHELD, + STATE_CHG_NOT_OK_INIT, + STATE_CHG_NOT_OK, + STATE_HW_TEMP_PROTECT_INIT, + STATE_HW_TEMP_PROTECT, + STATE_NORMAL_INIT, + STATE_NORMAL, + STATE_WAIT_FOR_RECHARGE_INIT, + STATE_WAIT_FOR_RECHARGE, + STATE_MAINTENANCE_A_INIT, + STATE_MAINTENANCE_A, + STATE_MAINTENANCE_B_INIT, + STATE_MAINTENANCE_B, + STATE_TEMP_UNDEROVER_INIT, + STATE_TEMP_UNDEROVER, + STATE_TEMP_LOWHIGH_INIT, + STATE_TEMP_LOWHIGH, + STATE_SUSPENDED_INIT, + STATE_SUSPENDED, + STATE_OVV_PROTECT_INIT, + STATE_OVV_PROTECT, + STATE_SAFETY_TIMER_EXPIRED_INIT, + STATE_SAFETY_TIMER_EXPIRED, + STATE_BATT_REMOVED_INIT, + STATE_BATT_REMOVED, + STATE_WD_EXPIRED_INIT, + STATE_WD_EXPIRED, +}; + +static const char *states[] = { + "HANDHELD_INIT", + "HANDHELD", + "CHG_NOT_OK_INIT", + "CHG_NOT_OK", + "HW_TEMP_PROTECT_INIT", + "HW_TEMP_PROTECT", + "NORMAL_INIT", + "NORMAL", + "WAIT_FOR_RECHARGE_INIT", + "WAIT_FOR_RECHARGE", + "MAINTENANCE_A_INIT", + "MAINTENANCE_A", + "MAINTENANCE_B_INIT", + "MAINTENANCE_B", + "TEMP_UNDEROVER_INIT", + "TEMP_UNDEROVER", + "TEMP_LOWHIGH_INIT", + "TEMP_LOWHIGH", + "SUSPENDED_INIT", + "SUSPENDED", + "OVV_PROTECT_INIT", + "OVV_PROTECT", + "SAFETY_TIMER_EXPIRED_INIT", + "SAFETY_TIMER_EXPIRED", + "BATT_REMOVED_INIT", + "BATT_REMOVED", + "WD_EXPIRED_INIT", + "WD_EXPIRED", +}; + +struct abx500_chargalg_events { + bool batt_unknown; + bool mainextchnotok; + bool batt_ovv; + bool batt_rem; + bool btemp_underover; + bool btemp_lowhigh; + bool main_thermal_prot; + bool usb_thermal_prot; + bool main_ovv; + bool vbus_ovv; + bool usbchargernotok; + bool safety_timer_expired; + bool maintenance_timer_expired; + bool ac_wd_expired; + bool usb_wd_expired; + bool ac_cv_active; + bool usb_cv_active; + bool vbus_collapsed; +}; + +/** + * struct abx500_charge_curr_maximization - Charger maximization parameters + * @original_iset: the non optimized/maximised charger current + * @current_iset: the charging current used at this moment + * @test_delta_i: the delta between the current we want to charge and the + current that is really going into the battery + * @condition_cnt: number of iterations needed before a new charger current + is set + * @max_current: maximum charger current + * @wait_cnt: to avoid too fast current step down in case of charger + * voltage collapse, we insert this delay between step + * down + * @level: tells in how many steps the charging current has been + increased + */ +struct abx500_charge_curr_maximization { + int original_iset; + int current_iset; + int test_delta_i; + int condition_cnt; + int max_current; + int wait_cnt; + u8 level; +}; + +enum maxim_ret { + MAXIM_RET_NOACTION, + MAXIM_RET_CHANGE, + MAXIM_RET_IBAT_TOO_HIGH, +}; + +/** + * struct abx500_chargalg - abx500 Charging algorithm device information + * @dev: pointer to the structure device + * @charge_status: battery operating status + * @eoc_cnt: counter used to determine end-of_charge + * @rch_cnt: counter used to determine start of recharge + * @maintenance_chg: indicate if maintenance charge is active + * @t_hyst_norm temperature hysteresis when the temperature has been + * over or under normal limits + * @t_hyst_lowhigh temperature hysteresis when the temperature has been + * over or under the high or low limits + * @charge_state: current state of the charging algorithm + * @ccm charging current maximization parameters + * @chg_info: information about connected charger types + * @batt_data: data of the battery + * @susp_status: current charger suspension status + * @pdata: pointer to the abx500_chargalg platform data + * @bat: pointer to the abx500_bm platform data + * @chargalg_psy: structure that holds the battery properties exposed by + * the charging algorithm + * @events: structure for information about events triggered + * @chargalg_wq: work queue for running the charging algorithm + * @chargalg_periodic_work: work to run the charging algorithm periodically + * @chargalg_wd_work: work to kick the charger watchdog periodically + * @chargalg_work: work to run the charging algorithm instantly + * @safety_timer: charging safety timer + * @maintenance_timer: maintenance charging timer + * @chargalg_kobject: structure of type kobject + */ +struct abx500_chargalg { + struct device *dev; + int charge_status; + int eoc_cnt; + int rch_cnt; + bool maintenance_chg; + int t_hyst_norm; + int t_hyst_lowhigh; + enum abx500_chargalg_states charge_state; + struct abx500_charge_curr_maximization ccm; + struct abx500_chargalg_charger_info chg_info; + struct abx500_chargalg_battery_data batt_data; + struct abx500_chargalg_suspension_status susp_status; + struct abx500_chargalg_platform_data *pdata; + struct abx500_bm_data *bat; + struct power_supply chargalg_psy; + struct ux500_charger *ac_chg; + struct ux500_charger *usb_chg; + struct abx500_chargalg_events events; + struct workqueue_struct *chargalg_wq; + struct delayed_work chargalg_periodic_work; + struct delayed_work chargalg_wd_work; + struct work_struct chargalg_work; + struct timer_list safety_timer; + struct timer_list maintenance_timer; + struct kobject chargalg_kobject; +}; + +/* Main battery properties */ +static enum power_supply_property abx500_chargalg_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, +}; + +/** + * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer + * @data: pointer to the abx500_chargalg structure + * + * This function gets called when the safety timer for the charger + * expires + */ +static void abx500_chargalg_safety_timer_expired(unsigned long data) +{ + struct abx500_chargalg *di = (struct abx500_chargalg *) data; + dev_err(di->dev, "Safety timer expired\n"); + di->events.safety_timer_expired = true; + + /* Trigger execution of the algorithm instantly */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_maintenance_timer_expired() - Expiration of + * the maintenance timer + * @i: pointer to the abx500_chargalg structure + * + * This function gets called when the maintenence timer + * expires + */ +static void abx500_chargalg_maintenance_timer_expired(unsigned long data) +{ + + struct abx500_chargalg *di = (struct abx500_chargalg *) data; + dev_dbg(di->dev, "Maintenance timer expired\n"); + di->events.maintenance_timer_expired = true; + + /* Trigger execution of the algorithm instantly */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_state_to() - Change charge state + * @di: pointer to the abx500_chargalg structure + * + * This function gets called when a charge state change should occur + */ +static void abx500_chargalg_state_to(struct abx500_chargalg *di, + enum abx500_chargalg_states state) +{ + dev_dbg(di->dev, + "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n", + di->charge_state == state ? "NO" : "YES", + di->charge_state, + states[di->charge_state], + state, + states[state]); + + di->charge_state = state; +} + +/** + * abx500_chargalg_check_charger_connection() - Check charger connection change + * @di: pointer to the abx500_chargalg structure + * + * This function will check if there is a change in the charger connection + * and change charge state accordingly. AC has precedence over USB. + */ +static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di) +{ + if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg || + di->susp_status.suspended_change) { + /* + * Charger state changed or suspension + * has changed since last update + */ + if ((di->chg_info.conn_chg & AC_CHG) && + !di->susp_status.ac_suspended) { + dev_dbg(di->dev, "Charging source is AC\n"); + if (di->chg_info.charger_type != AC_CHG) { + di->chg_info.charger_type = AC_CHG; + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } + } else if ((di->chg_info.conn_chg & USB_CHG) && + !di->susp_status.usb_suspended) { + dev_dbg(di->dev, "Charging source is USB\n"); + di->chg_info.charger_type = USB_CHG; + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } else if (di->chg_info.conn_chg && + (di->susp_status.ac_suspended || + di->susp_status.usb_suspended)) { + dev_dbg(di->dev, "Charging is suspended\n"); + di->chg_info.charger_type = NO_CHG; + abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT); + } else { + dev_dbg(di->dev, "Charging source is OFF\n"); + di->chg_info.charger_type = NO_CHG; + abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); + } + di->chg_info.prev_conn_chg = di->chg_info.conn_chg; + di->susp_status.suspended_change = false; + } + return di->chg_info.conn_chg; +} + +/** + * abx500_chargalg_start_safety_timer() - Start charging safety timer + * @di: pointer to the abx500_chargalg structure + * + * The safety timer is used to avoid overcharging of old or bad batteries. + * There are different timers for AC and USB + */ +static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) +{ + unsigned long timer_expiration = 0; + + switch (di->chg_info.charger_type) { + case AC_CHG: + timer_expiration = + round_jiffies(jiffies + + (di->bat->main_safety_tmr_h * 3600 * HZ)); + break; + + case USB_CHG: + timer_expiration = + round_jiffies(jiffies + + (di->bat->usb_safety_tmr_h * 3600 * HZ)); + break; + + default: + dev_err(di->dev, "Unknown charger to charge from\n"); + break; + } + + di->events.safety_timer_expired = false; + di->safety_timer.expires = timer_expiration; + if (!timer_pending(&di->safety_timer)) + add_timer(&di->safety_timer); + else + mod_timer(&di->safety_timer, timer_expiration); +} + +/** + * abx500_chargalg_stop_safety_timer() - Stop charging safety timer + * @di: pointer to the abx500_chargalg structure + * + * The safety timer is stopped whenever the NORMAL state is exited + */ +static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di) +{ + di->events.safety_timer_expired = false; + del_timer(&di->safety_timer); +} + +/** + * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer + * @di: pointer to the abx500_chargalg structure + * @duration: duration of ther maintenance timer in hours + * + * The maintenance timer is used to maintain the charge in the battery once + * the battery is considered full. These timers are chosen to match the + * discharge curve of the battery + */ +static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di, + int duration) +{ + unsigned long timer_expiration; + + /* Convert from hours to jiffies */ + timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ)); + + di->events.maintenance_timer_expired = false; + di->maintenance_timer.expires = timer_expiration; + if (!timer_pending(&di->maintenance_timer)) + add_timer(&di->maintenance_timer); + else + mod_timer(&di->maintenance_timer, timer_expiration); +} + +/** + * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer + * @di: pointer to the abx500_chargalg structure + * + * The maintenance timer is stopped whenever maintenance ends or when another + * state is entered + */ +static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di) +{ + di->events.maintenance_timer_expired = false; + del_timer(&di->maintenance_timer); +} + +/** + * abx500_chargalg_kick_watchdog() - Kick charger watchdog + * @di: pointer to the abx500_chargalg structure + * + * The charger watchdog have to be kicked periodically whenever the charger is + * on, else the ABB will reset the system + */ +static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di) +{ + /* Check if charger exists and kick watchdog if charging */ + if (di->ac_chg && di->ac_chg->ops.kick_wd && + di->chg_info.online_chg & AC_CHG) + return di->ac_chg->ops.kick_wd(di->ac_chg); + else if (di->usb_chg && di->usb_chg->ops.kick_wd && + di->chg_info.online_chg & USB_CHG) + return di->usb_chg->ops.kick_wd(di->usb_chg); + + return -ENXIO; +} + +/** + * abx500_chargalg_ac_en() - Turn on/off the AC charger + * @di: pointer to the abx500_chargalg structure + * @enable: charger on/off + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * The AC charger will be turned on/off with the requested charge voltage and + * current + */ +static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable, + int vset, int iset) +{ + if (!di->ac_chg || !di->ac_chg->ops.enable) + return -ENXIO; + + /* Select maximum of what both the charger and the battery supports */ + if (di->ac_chg->max_out_volt) + vset = min(vset, di->ac_chg->max_out_volt); + if (di->ac_chg->max_out_curr) + iset = min(iset, di->ac_chg->max_out_curr); + + di->chg_info.ac_iset = iset; + di->chg_info.ac_vset = vset; + + return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset); +} + +/** + * abx500_chargalg_usb_en() - Turn on/off the USB charger + * @di: pointer to the abx500_chargalg structure + * @enable: charger on/off + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * The USB charger will be turned on/off with the requested charge voltage and + * current + */ +static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable, + int vset, int iset) +{ + if (!di->usb_chg || !di->usb_chg->ops.enable) + return -ENXIO; + + /* Select maximum of what both the charger and the battery supports */ + if (di->usb_chg->max_out_volt) + vset = min(vset, di->usb_chg->max_out_volt); + if (di->usb_chg->max_out_curr) + iset = min(iset, di->usb_chg->max_out_curr); + + di->chg_info.usb_iset = iset; + di->chg_info.usb_vset = vset; + + return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset); +} + +/** + * abx500_chargalg_update_chg_curr() - Update charger current + * @di: pointer to the abx500_chargalg structure + * @iset: requested charger output current + * + * The charger output current will be updated for the charger + * that is currently in use + */ +static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di, + int iset) +{ + /* Check if charger exists and update current if charging */ + if (di->ac_chg && di->ac_chg->ops.update_curr && + di->chg_info.charger_type & AC_CHG) { + /* + * Select maximum of what both the charger + * and the battery supports + */ + if (di->ac_chg->max_out_curr) + iset = min(iset, di->ac_chg->max_out_curr); + + di->chg_info.ac_iset = iset; + + return di->ac_chg->ops.update_curr(di->ac_chg, iset); + } else if (di->usb_chg && di->usb_chg->ops.update_curr && + di->chg_info.charger_type & USB_CHG) { + /* + * Select maximum of what both the charger + * and the battery supports + */ + if (di->usb_chg->max_out_curr) + iset = min(iset, di->usb_chg->max_out_curr); + + di->chg_info.usb_iset = iset; + + return di->usb_chg->ops.update_curr(di->usb_chg, iset); + } + + return -ENXIO; +} + +/** + * abx500_chargalg_stop_charging() - Stop charging + * @di: pointer to the abx500_chargalg structure + * + * This function is called from any state where charging should be stopped. + * All charging is disabled and all status parameters and timers are changed + * accordingly + */ +static void abx500_chargalg_stop_charging(struct abx500_chargalg *di) +{ + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + di->maintenance_chg = false; + cancel_delayed_work(&di->chargalg_wd_work); + power_supply_changed(&di->chargalg_psy); +} + +/** + * abx500_chargalg_hold_charging() - Pauses charging + * @di: pointer to the abx500_chargalg structure + * + * This function is called in the case where maintenance charging has been + * disabled and instead a battery voltage mode is entered to check when the + * battery voltage has reached a certain recharge voltage + */ +static void abx500_chargalg_hold_charging(struct abx500_chargalg *di) +{ + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + di->maintenance_chg = false; + cancel_delayed_work(&di->chargalg_wd_work); + power_supply_changed(&di->chargalg_psy); +} + +/** + * abx500_chargalg_start_charging() - Start the charger + * @di: pointer to the abx500_chargalg structure + * @vset: requested charger output voltage + * @iset: requested charger output current + * + * A charger will be enabled depending on the requested charger type that was + * detected previously. + */ +static void abx500_chargalg_start_charging(struct abx500_chargalg *di, + int vset, int iset) +{ + switch (di->chg_info.charger_type) { + case AC_CHG: + dev_dbg(di->dev, + "AC parameters: Vset %d, Ich %d\n", vset, iset); + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_ac_en(di, true, vset, iset); + break; + + case USB_CHG: + dev_dbg(di->dev, + "USB parameters: Vset %d, Ich %d\n", vset, iset); + abx500_chargalg_ac_en(di, false, 0, 0); + abx500_chargalg_usb_en(di, true, vset, iset); + break; + + default: + dev_err(di->dev, "Unknown charger to charge from\n"); + break; + } +} + +/** + * abx500_chargalg_check_temp() - Check battery temperature ranges + * @di: pointer to the abx500_chargalg structure + * + * The battery temperature is checked against the predefined limits and the + * charge state is changed accordingly + */ +static void abx500_chargalg_check_temp(struct abx500_chargalg *di) +{ + if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) && + di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) { + /* Temp OK! */ + di->events.btemp_underover = false; + di->events.btemp_lowhigh = false; + di->t_hyst_norm = 0; + di->t_hyst_lowhigh = 0; + } else { + if (((di->batt_data.temp >= di->bat->temp_high) && + (di->batt_data.temp < + (di->bat->temp_over - di->t_hyst_lowhigh))) || + ((di->batt_data.temp > + (di->bat->temp_under + di->t_hyst_lowhigh)) && + (di->batt_data.temp <= di->bat->temp_low))) { + /* TEMP minor!!!!! */ + di->events.btemp_underover = false; + di->events.btemp_lowhigh = true; + di->t_hyst_norm = di->bat->temp_hysteresis; + di->t_hyst_lowhigh = 0; + } else if (di->batt_data.temp <= di->bat->temp_under || + di->batt_data.temp >= di->bat->temp_over) { + /* TEMP major!!!!! */ + di->events.btemp_underover = true; + di->events.btemp_lowhigh = false; + di->t_hyst_norm = 0; + di->t_hyst_lowhigh = di->bat->temp_hysteresis; + } else { + /* Within hysteresis */ + dev_dbg(di->dev, "Within hysteresis limit temp: %d " + "hyst_lowhigh %d, hyst normal %d\n", + di->batt_data.temp, di->t_hyst_lowhigh, + di->t_hyst_norm); + } + } +} + +/** + * abx500_chargalg_check_charger_voltage() - Check charger voltage + * @di: pointer to the abx500_chargalg structure + * + * Charger voltage is checked against maximum limit + */ +static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di) +{ + if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max) + di->chg_info.usb_chg_ok = false; + else + di->chg_info.usb_chg_ok = true; + + if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max) + di->chg_info.ac_chg_ok = false; + else + di->chg_info.ac_chg_ok = true; + +} + +/** + * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled + * @di: pointer to the abx500_chargalg structure + * + * End-of-charge criteria is fulfilled when the battery voltage is above a + * certain limit and the battery current is below a certain limit for a + * predefined number of consecutive seconds. If true, the battery is full + */ +static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) +{ + if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING && + di->charge_state == STATE_NORMAL && + !di->maintenance_chg && (di->batt_data.volt >= + di->bat->bat_type[di->bat->batt_id].termination_vol || + di->events.usb_cv_active || di->events.ac_cv_active) && + di->batt_data.avg_curr < + di->bat->bat_type[di->bat->batt_id].termination_curr && + di->batt_data.avg_curr > 0) { + if (++di->eoc_cnt >= EOC_COND_CNT) { + di->eoc_cnt = 0; + di->charge_status = POWER_SUPPLY_STATUS_FULL; + di->maintenance_chg = true; + dev_dbg(di->dev, "EOC reached!\n"); + power_supply_changed(&di->chargalg_psy); + } else { + dev_dbg(di->dev, + " EOC limit reached for the %d" + " time, out of %d before EOC\n", + di->eoc_cnt, + EOC_COND_CNT); + } + } else { + di->eoc_cnt = 0; + } +} + +static void init_maxim_chg_curr(struct abx500_chargalg *di) +{ + di->ccm.original_iset = + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->ccm.current_iset = + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl; + di->ccm.test_delta_i = di->bat->maxi->charger_curr_step; + di->ccm.max_current = di->bat->maxi->chg_curr; + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.level = 0; +} + +/** + * abx500_chargalg_chg_curr_maxim - increases the charger current to + * compensate for the system load + * @di pointer to the abx500_chargalg structure + * + * This maximization function is used to raise the charger current to get the + * battery current as close to the optimal value as possible. The battery + * current during charging is affected by the system load + */ +static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di) +{ + int delta_i; + + if (!di->bat->maxi->ena_maxi) + return MAXIM_RET_NOACTION; + + delta_i = di->ccm.original_iset - di->batt_data.inst_curr; + + if (di->events.vbus_collapsed) { + dev_dbg(di->dev, "Charger voltage has collapsed %d\n", + di->ccm.wait_cnt); + if (di->ccm.wait_cnt == 0) { + dev_dbg(di->dev, "lowering current\n"); + di->ccm.wait_cnt++; + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.max_current = + di->ccm.current_iset - di->ccm.test_delta_i; + di->ccm.current_iset = di->ccm.max_current; + di->ccm.level--; + return MAXIM_RET_CHANGE; + } else { + dev_dbg(di->dev, "waiting\n"); + /* Let's go in here twice before lowering curr again */ + di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3; + return MAXIM_RET_NOACTION; + } + } + + di->ccm.wait_cnt = 0; + + if ((di->batt_data.inst_curr > di->ccm.original_iset)) { + dev_dbg(di->dev, " Maximization Ibat (%dmA) too high" + " (limit %dmA) (current iset: %dmA)!\n", + di->batt_data.inst_curr, di->ccm.original_iset, + di->ccm.current_iset); + + if (di->ccm.current_iset == di->ccm.original_iset) + return MAXIM_RET_NOACTION; + + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.current_iset = di->ccm.original_iset; + di->ccm.level = 0; + + return MAXIM_RET_IBAT_TOO_HIGH; + } + + if (delta_i > di->ccm.test_delta_i && + (di->ccm.current_iset + di->ccm.test_delta_i) < + di->ccm.max_current) { + if (di->ccm.condition_cnt-- == 0) { + /* Increse the iset with cco.test_delta_i */ + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + di->ccm.current_iset += di->ccm.test_delta_i; + di->ccm.level++; + dev_dbg(di->dev, " Maximization needed, increase" + " with %d mA to %dmA (Optimal ibat: %d)" + " Level %d\n", + di->ccm.test_delta_i, + di->ccm.current_iset, + di->ccm.original_iset, + di->ccm.level); + return MAXIM_RET_CHANGE; + } else { + return MAXIM_RET_NOACTION; + } + } else { + di->ccm.condition_cnt = di->bat->maxi->wait_cycles; + return MAXIM_RET_NOACTION; + } +} + +static void handle_maxim_chg_curr(struct abx500_chargalg *di) +{ + enum maxim_ret ret; + int result; + + ret = abx500_chargalg_chg_curr_maxim(di); + switch (ret) { + case MAXIM_RET_CHANGE: + result = abx500_chargalg_update_chg_curr(di, + di->ccm.current_iset); + if (result) + dev_err(di->dev, "failed to set chg curr\n"); + break; + case MAXIM_RET_IBAT_TOO_HIGH: + result = abx500_chargalg_update_chg_curr(di, + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + if (result) + dev_err(di->dev, "failed to set chg curr\n"); + break; + + case MAXIM_RET_NOACTION: + default: + /* Do nothing..*/ + break; + } +} + +static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct abx500_chargalg *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + + psy = (struct power_supply *)data; + ext = dev_get_drvdata(dev); + di = to_abx500_chargalg_device_info(psy); + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + /* Initialize chargers if not already done */ + if (!di->ac_chg && + ext->type == POWER_SUPPLY_TYPE_MAINS) + di->ac_chg = psy_to_ux500_charger(ext); + else if (!di->usb_chg && + ext->type == POWER_SUPPLY_TYPE_USB) + di->usb_chg = psy_to_ux500_charger(ext); + + if (ext->get_property(ext, prop, &ret)) + continue; + switch (prop) { + case POWER_SUPPLY_PROP_PRESENT: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + /* Battery present */ + if (ret.intval) + di->events.batt_rem = false; + /* Battery removed */ + else + di->events.batt_rem = true; + break; + case POWER_SUPPLY_TYPE_MAINS: + /* AC disconnected */ + if (!ret.intval && + (di->chg_info.conn_chg & AC_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg &= ~AC_CHG; + } + /* AC connected */ + else if (ret.intval && + !(di->chg_info.conn_chg & AC_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg |= AC_CHG; + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB disconnected */ + if (!ret.intval && + (di->chg_info.conn_chg & USB_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg &= ~USB_CHG; + } + /* USB connected */ + else if (ret.intval && + !(di->chg_info.conn_chg & USB_CHG)) { + di->chg_info.prev_conn_chg = + di->chg_info.conn_chg; + di->chg_info.conn_chg |= USB_CHG; + } + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_ONLINE: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + break; + case POWER_SUPPLY_TYPE_MAINS: + /* AC offline */ + if (!ret.intval && + (di->chg_info.online_chg & AC_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg &= ~AC_CHG; + } + /* AC online */ + else if (ret.intval && + !(di->chg_info.online_chg & AC_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg |= AC_CHG; + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, 0); + } + break; + case POWER_SUPPLY_TYPE_USB: + /* USB offline */ + if (!ret.intval && + (di->chg_info.online_chg & USB_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg &= ~USB_CHG; + } + /* USB online */ + else if (ret.intval && + !(di->chg_info.online_chg & USB_CHG)) { + di->chg_info.prev_online_chg = + di->chg_info.online_chg; + di->chg_info.online_chg |= USB_CHG; + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, 0); + } + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_HEALTH: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + break; + case POWER_SUPPLY_TYPE_MAINS: + switch (ret.intval) { + case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: + di->events.mainextchnotok = true; + di->events.main_thermal_prot = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_DEAD: + di->events.ac_wd_expired = true; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.main_thermal_prot = false; + break; + case POWER_SUPPLY_HEALTH_COLD: + case POWER_SUPPLY_HEALTH_OVERHEAT: + di->events.main_thermal_prot = true; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_OVERVOLTAGE: + di->events.main_ovv = true; + di->events.mainextchnotok = false; + di->events.main_thermal_prot = false; + di->events.ac_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_GOOD: + di->events.main_thermal_prot = false; + di->events.mainextchnotok = false; + di->events.main_ovv = false; + di->events.ac_wd_expired = false; + break; + default: + break; + } + break; + + case POWER_SUPPLY_TYPE_USB: + switch (ret.intval) { + case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE: + di->events.usbchargernotok = true; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_DEAD: + di->events.usb_wd_expired = true; + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + break; + case POWER_SUPPLY_HEALTH_COLD: + case POWER_SUPPLY_HEALTH_OVERHEAT: + di->events.usb_thermal_prot = true; + di->events.usbchargernotok = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_OVERVOLTAGE: + di->events.vbus_ovv = true; + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.usb_wd_expired = false; + break; + case POWER_SUPPLY_HEALTH_GOOD: + di->events.usbchargernotok = false; + di->events.usb_thermal_prot = false; + di->events.vbus_ovv = false; + di->events.usb_wd_expired = false; + break; + default: + break; + } + default: + break; + } + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.volt = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_MAINS: + di->chg_info.ac_volt = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + di->chg_info.usb_volt = ret.intval / 1000; + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + /* AVG is used to indicate when we are + * in CV mode */ + if (ret.intval) + di->events.ac_cv_active = true; + else + di->events.ac_cv_active = false; + + break; + case POWER_SUPPLY_TYPE_USB: + /* AVG is used to indicate when we are + * in CV mode */ + if (ret.intval) + di->events.usb_cv_active = true; + else + di->events.usb_cv_active = false; + + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + if (ret.intval) + di->events.batt_unknown = false; + else + di->events.batt_unknown = true; + + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_TEMP: + di->batt_data.temp = ret.intval / 10; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_MAINS: + di->chg_info.ac_curr = + ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + di->chg_info.usb_curr = + ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.inst_curr = ret.intval / 1000; + break; + default: + break; + } + break; + + case POWER_SUPPLY_PROP_CURRENT_AVG: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->batt_data.avg_curr = ret.intval / 1000; + break; + case POWER_SUPPLY_TYPE_USB: + if (ret.intval) + di->events.vbus_collapsed = true; + else + di->events.vbus_collapsed = false; + break; + default: + break; + } + break; + case POWER_SUPPLY_PROP_CAPACITY: + di->batt_data.percent = ret.intval; + break; + default: + break; + } + } + return 0; +} + +/** + * abx500_chargalg_external_power_changed() - callback for power supply changes + * @psy: pointer to the structure power_supply + * + * This function is the entry point of the pointer external_power_changed + * of the structure power_supply. + * This function gets executed when there is a change in any external power + * supply that this driver needs to be notified of. + */ +static void abx500_chargalg_external_power_changed(struct power_supply *psy) +{ + struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy); + + /* + * Trigger execution of the algorithm instantly and read + * all power_supply properties there instead + */ + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_algorithm() - Main function for the algorithm + * @di: pointer to the abx500_chargalg structure + * + * This is the main control function for the charging algorithm. + * It is called periodically or when something happens that will + * trigger a state change + */ +static void abx500_chargalg_algorithm(struct abx500_chargalg *di) +{ + int charger_status; + + /* Collect data from all power_supply class devices */ + class_for_each_device(power_supply_class, NULL, + &di->chargalg_psy, abx500_chargalg_get_ext_psy_data); + + abx500_chargalg_end_of_charge(di); + abx500_chargalg_check_temp(di); + abx500_chargalg_check_charger_voltage(di); + + charger_status = abx500_chargalg_check_charger_connection(di); + /* + * First check if we have a charger connected. + * Also we don't allow charging of unknown batteries if configured + * this way + */ + if (!charger_status || + (di->events.batt_unknown && !di->bat->chg_unknown_bat)) { + if (di->charge_state != STATE_HANDHELD) { + di->events.safety_timer_expired = false; + abx500_chargalg_state_to(di, STATE_HANDHELD_INIT); + } + } + + /* If suspended, we should not continue checking the flags */ + else if (di->charge_state == STATE_SUSPENDED_INIT || + di->charge_state == STATE_SUSPENDED) { + /* We don't do anything here, just don,t continue */ + } + + /* Safety timer expiration */ + else if (di->events.safety_timer_expired) { + if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED) + abx500_chargalg_state_to(di, + STATE_SAFETY_TIMER_EXPIRED_INIT); + } + /* + * Check if any interrupts has occured + * that will prevent us from charging + */ + + /* Battery removed */ + else if (di->events.batt_rem) { + if (di->charge_state != STATE_BATT_REMOVED) + abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT); + } + /* Main or USB charger not ok. */ + else if (di->events.mainextchnotok || di->events.usbchargernotok) { + /* + * If vbus_collapsed is set, we have to lower the charger + * current, which is done in the normal state below + */ + if (di->charge_state != STATE_CHG_NOT_OK && + !di->events.vbus_collapsed) + abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT); + } + /* VBUS, Main or VBAT OVV. */ + else if (di->events.vbus_ovv || + di->events.main_ovv || + di->events.batt_ovv || + !di->chg_info.usb_chg_ok || + !di->chg_info.ac_chg_ok) { + if (di->charge_state != STATE_OVV_PROTECT) + abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT); + } + /* USB Thermal, stop charging */ + else if (di->events.main_thermal_prot || + di->events.usb_thermal_prot) { + if (di->charge_state != STATE_HW_TEMP_PROTECT) + abx500_chargalg_state_to(di, + STATE_HW_TEMP_PROTECT_INIT); + } + /* Battery temp over/under */ + else if (di->events.btemp_underover) { + if (di->charge_state != STATE_TEMP_UNDEROVER) + abx500_chargalg_state_to(di, + STATE_TEMP_UNDEROVER_INIT); + } + /* Watchdog expired */ + else if (di->events.ac_wd_expired || + di->events.usb_wd_expired) { + if (di->charge_state != STATE_WD_EXPIRED) + abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT); + } + /* Battery temp high/low */ + else if (di->events.btemp_lowhigh) { + if (di->charge_state != STATE_TEMP_LOWHIGH) + abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT); + } + + dev_dbg(di->dev, + "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d " + "State %s Active_chg %d Chg_status %d AC %d USB %d " + "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d " + "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n", + di->batt_data.volt, + di->batt_data.avg_curr, + di->batt_data.inst_curr, + di->batt_data.temp, + di->batt_data.percent, + di->maintenance_chg, + states[di->charge_state], + di->chg_info.charger_type, + di->charge_status, + di->chg_info.conn_chg & AC_CHG, + di->chg_info.conn_chg & USB_CHG, + di->chg_info.online_chg & AC_CHG, + di->chg_info.online_chg & USB_CHG, + di->events.ac_cv_active, + di->events.usb_cv_active, + di->chg_info.ac_curr, + di->chg_info.usb_curr, + di->chg_info.ac_vset, + di->chg_info.ac_iset, + di->chg_info.usb_vset, + di->chg_info.usb_iset); + + switch (di->charge_state) { + case STATE_HANDHELD_INIT: + abx500_chargalg_stop_charging(di); + di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; + abx500_chargalg_state_to(di, STATE_HANDHELD); + /* Intentional fallthrough */ + + case STATE_HANDHELD: + break; + + case STATE_SUSPENDED_INIT: + if (di->susp_status.ac_suspended) + abx500_chargalg_ac_en(di, false, 0, 0); + if (di->susp_status.usb_suspended) + abx500_chargalg_usb_en(di, false, 0, 0); + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; + di->maintenance_chg = false; + abx500_chargalg_state_to(di, STATE_SUSPENDED); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough */ + + case STATE_SUSPENDED: + /* CHARGING is suspended */ + break; + + case STATE_BATT_REMOVED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_BATT_REMOVED); + /* Intentional fallthrough */ + + case STATE_BATT_REMOVED: + if (!di->events.batt_rem) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_HW_TEMP_PROTECT_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT); + /* Intentional fallthrough */ + + case STATE_HW_TEMP_PROTECT: + if (!di->events.main_thermal_prot && + !di->events.usb_thermal_prot) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_OVV_PROTECT_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_OVV_PROTECT); + /* Intentional fallthrough */ + + case STATE_OVV_PROTECT: + if (!di->events.vbus_ovv && + !di->events.main_ovv && + !di->events.batt_ovv && + di->chg_info.usb_chg_ok && + di->chg_info.ac_chg_ok) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_CHG_NOT_OK_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_CHG_NOT_OK); + /* Intentional fallthrough */ + + case STATE_CHG_NOT_OK: + if (!di->events.mainextchnotok && + !di->events.usbchargernotok) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_SAFETY_TIMER_EXPIRED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED); + /* Intentional fallthrough */ + + case STATE_SAFETY_TIMER_EXPIRED: + /* We exit this state when charger is removed */ + break; + + case STATE_NORMAL_INIT: + abx500_chargalg_start_charging(di, + di->bat->bat_type[di->bat->batt_id].normal_vol_lvl, + di->bat->bat_type[di->bat->batt_id].normal_cur_lvl); + abx500_chargalg_state_to(di, STATE_NORMAL); + abx500_chargalg_start_safety_timer(di); + abx500_chargalg_stop_maintenance_timer(di); + init_maxim_chg_curr(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + di->eoc_cnt = 0; + di->maintenance_chg = false; + power_supply_changed(&di->chargalg_psy); + + break; + + case STATE_NORMAL: + handle_maxim_chg_curr(di); + if (di->charge_status == POWER_SUPPLY_STATUS_FULL && + di->maintenance_chg) { + if (di->bat->no_maintenance) + abx500_chargalg_state_to(di, + STATE_WAIT_FOR_RECHARGE_INIT); + else + abx500_chargalg_state_to(di, + STATE_MAINTENANCE_A_INIT); + } + break; + + /* This state will be used when the maintenance state is disabled */ + case STATE_WAIT_FOR_RECHARGE_INIT: + abx500_chargalg_hold_charging(di); + abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE); + di->rch_cnt = RCH_COND_CNT; + /* Intentional fallthrough */ + + case STATE_WAIT_FOR_RECHARGE: + if (di->batt_data.volt <= + di->bat->bat_type[di->bat->batt_id].recharge_vol) { + if (di->rch_cnt-- == 0) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } else + di->rch_cnt = RCH_COND_CNT; + break; + + case STATE_MAINTENANCE_A_INIT: + abx500_chargalg_stop_safety_timer(di); + abx500_chargalg_start_maintenance_timer(di, + di->bat->bat_type[ + di->bat->batt_id].maint_a_chg_timer_h); + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].maint_a_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].maint_a_cur_lvl); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_A); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough*/ + + case STATE_MAINTENANCE_A: + if (di->events.maintenance_timer_expired) { + abx500_chargalg_stop_maintenance_timer(di); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT); + } + break; + + case STATE_MAINTENANCE_B_INIT: + abx500_chargalg_start_maintenance_timer(di, + di->bat->bat_type[ + di->bat->batt_id].maint_b_chg_timer_h); + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].maint_b_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].maint_b_cur_lvl); + abx500_chargalg_state_to(di, STATE_MAINTENANCE_B); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough*/ + + case STATE_MAINTENANCE_B: + if (di->events.maintenance_timer_expired) { + abx500_chargalg_stop_maintenance_timer(di); + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + } + break; + + case STATE_TEMP_LOWHIGH_INIT: + abx500_chargalg_start_charging(di, + di->bat->bat_type[ + di->bat->batt_id].low_high_vol_lvl, + di->bat->bat_type[ + di->bat->batt_id].low_high_cur_lvl); + abx500_chargalg_stop_maintenance_timer(di); + di->charge_status = POWER_SUPPLY_STATUS_CHARGING; + abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH); + power_supply_changed(&di->chargalg_psy); + /* Intentional fallthrough */ + + case STATE_TEMP_LOWHIGH: + if (!di->events.btemp_lowhigh) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_WD_EXPIRED_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_WD_EXPIRED); + /* Intentional fallthrough */ + + case STATE_WD_EXPIRED: + if (!di->events.ac_wd_expired && + !di->events.usb_wd_expired) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + + case STATE_TEMP_UNDEROVER_INIT: + abx500_chargalg_stop_charging(di); + abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER); + /* Intentional fallthrough */ + + case STATE_TEMP_UNDEROVER: + if (!di->events.btemp_underover) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + } + + /* Start charging directly if the new state is a charge state */ + if (di->charge_state == STATE_NORMAL_INIT || + di->charge_state == STATE_MAINTENANCE_A_INIT || + di->charge_state == STATE_MAINTENANCE_B_INIT) + queue_work(di->chargalg_wq, &di->chargalg_work); +} + +/** + * abx500_chargalg_periodic_work() - Periodic work for the algorithm + * @work: pointer to the work_struct structure + * + * Work queue function for the charging algorithm + */ +static void abx500_chargalg_periodic_work(struct work_struct *work) +{ + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_periodic_work.work); + + abx500_chargalg_algorithm(di); + + /* + * If a charger is connected then the battery has to be monitored + * frequently, else the work can be delayed. + */ + if (di->chg_info.conn_chg) + queue_delayed_work(di->chargalg_wq, + &di->chargalg_periodic_work, + di->bat->interval_charging * HZ); + else + queue_delayed_work(di->chargalg_wq, + &di->chargalg_periodic_work, + di->bat->interval_not_charging * HZ); +} + +/** + * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog + */ +static void abx500_chargalg_wd_work(struct work_struct *work) +{ + int ret; + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_wd_work.work); + + dev_dbg(di->dev, "abx500_chargalg_wd_work\n"); + + ret = abx500_chargalg_kick_watchdog(di); + if (ret < 0) + dev_err(di->dev, "failed to kick watchdog\n"); + + queue_delayed_work(di->chargalg_wq, + &di->chargalg_wd_work, CHG_WD_INTERVAL); +} + +/** + * abx500_chargalg_work() - Work to run the charging algorithm instantly + * @work: pointer to the work_struct structure + * + * Work queue function for calling the charging algorithm + */ +static void abx500_chargalg_work(struct work_struct *work) +{ + struct abx500_chargalg *di = container_of(work, + struct abx500_chargalg, chargalg_work); + + abx500_chargalg_algorithm(di); +} + +/** + * abx500_chargalg_get_property() - get the chargalg properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the + * chargalg properties by reading the sysfs files. + * status: charging/discharging/full/unknown + * health: health of the battery + * Returns error code in case of failure else 0 on success + */ +static int abx500_chargalg_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct abx500_chargalg *di; + + di = to_abx500_chargalg_device_info(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = di->charge_status; + break; + case POWER_SUPPLY_PROP_HEALTH: + if (di->events.batt_ovv) { + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + } else if (di->events.btemp_underover) { + if (di->batt_data.temp <= di->bat->temp_under) + val->intval = POWER_SUPPLY_HEALTH_COLD; + else + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + } else { + val->intval = POWER_SUPPLY_HEALTH_GOOD; + } + break; + default: + return -EINVAL; + } + return 0; +} + +/* Exposure to the sysfs interface */ + +/** + * abx500_chargalg_sysfs_charger() - sysfs store operations + * @kobj: pointer to the struct kobject + * @attr: pointer to the struct attribute + * @buf: buffer that holds the parameter passed from userspace + * @length: length of the parameter passed + * + * Returns length of the buffer(input taken from user space) on success + * else error code on failure + * The operation to be performed on passing the parameters from the user space. + */ +static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t length) +{ + struct abx500_chargalg *di = container_of(kobj, + struct abx500_chargalg, chargalg_kobject); + long int param; + int ac_usb; + int ret; + char entry = *attr->name; + + switch (entry) { + case 'c': + ret = strict_strtol(buf, 10, ¶m); + if (ret < 0) + return ret; + + ac_usb = param; + switch (ac_usb) { + case 0: + /* Disable charging */ + di->susp_status.ac_suspended = true; + di->susp_status.usb_suspended = true; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 1: + /* Enable AC Charging */ + di->susp_status.ac_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 2: + /* Enable USB charging */ + di->susp_status.usb_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + default: + dev_info(di->dev, "Wrong input\n" + "Enter 0. Disable AC/USB Charging\n" + "1. Enable AC charging\n" + "2. Enable USB Charging\n"); + }; + break; + }; + return strlen(buf); +} + +static struct attribute abx500_chargalg_en_charger = \ +{ + .name = "chargalg", + .mode = S_IWUGO, +}; + +static struct attribute *abx500_chargalg_chg[] = { + &abx500_chargalg_en_charger, + NULL +}; + +const struct sysfs_ops abx500_chargalg_sysfs_ops = { + .store = abx500_chargalg_sysfs_charger, +}; + +static struct kobj_type abx500_chargalg_ktype = { + .sysfs_ops = &abx500_chargalg_sysfs_ops, + .default_attrs = abx500_chargalg_chg, +}; + +/** + * abx500_chargalg_sysfs_exit() - de-init of sysfs entry + * @di: pointer to the struct abx500_chargalg + * + * This function removes the entry in sysfs. + */ +static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di) +{ + kobject_del(&di->chargalg_kobject); +} + +/** + * abx500_chargalg_sysfs_init() - init of sysfs entry + * @di: pointer to the struct abx500_chargalg + * + * This function adds an entry in sysfs. + * Returns error code in case of failure else 0(on success) + */ +static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di) +{ + int ret = 0; + + ret = kobject_init_and_add(&di->chargalg_kobject, + &abx500_chargalg_ktype, + NULL, "abx500_chargalg"); + if (ret < 0) + dev_err(di->dev, "failed to create sysfs entry\n"); + + return ret; +} +/* Exposure to the sysfs interface <> */ + +#if defined(CONFIG_PM) +static int abx500_chargalg_resume(struct platform_device *pdev) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + /* Kick charger watchdog if charging (any charger online) */ + if (di->chg_info.online_chg) + queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); + + /* + * Run the charging algorithm directly to be sure we don't + * do it too seldom + */ + queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); + + return 0; +} + +static int abx500_chargalg_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + if (di->chg_info.online_chg) + cancel_delayed_work_sync(&di->chargalg_wd_work); + + cancel_delayed_work_sync(&di->chargalg_periodic_work); + + return 0; +} +#else +#define abx500_chargalg_suspend NULL +#define abx500_chargalg_resume NULL +#endif + +static int __devexit abx500_chargalg_remove(struct platform_device *pdev) +{ + struct abx500_chargalg *di = platform_get_drvdata(pdev); + + /* sysfs interface to enable/disbale charging from user space */ + abx500_chargalg_sysfs_exit(di); + + /* Delete the work queue */ + destroy_workqueue(di->chargalg_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->chargalg_psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit abx500_chargalg_probe(struct platform_device *pdev) +{ + struct abx500_bm_plat_data *plat_data; + int ret = 0; + + struct abx500_chargalg *di = + kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get device struct */ + di->dev = &pdev->dev; + + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->chargalg; + di->bat = plat_data->battery; + + /* chargalg supply */ + di->chargalg_psy.name = "abx500_chargalg"; + di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY; + di->chargalg_psy.properties = abx500_chargalg_props; + di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props); + di->chargalg_psy.get_property = abx500_chargalg_get_property; + di->chargalg_psy.supplied_to = di->pdata->supplied_to; + di->chargalg_psy.num_supplicants = di->pdata->num_supplicants; + di->chargalg_psy.external_power_changed = + abx500_chargalg_external_power_changed; + + /* Initilialize safety timer */ + init_timer(&di->safety_timer); + di->safety_timer.function = abx500_chargalg_safety_timer_expired; + di->safety_timer.data = (unsigned long) di; + + /* Initilialize maintenance timer */ + init_timer(&di->maintenance_timer); + di->maintenance_timer.function = + abx500_chargalg_maintenance_timer_expired; + di->maintenance_timer.data = (unsigned long) di; + + /* Create a work queue for the chargalg */ + di->chargalg_wq = + create_singlethread_workqueue("abx500_chargalg_wq"); + if (di->chargalg_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for chargalg */ + INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_periodic_work, + abx500_chargalg_periodic_work); + INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_wd_work, + abx500_chargalg_wd_work); + + /* Init work for chargalg */ + INIT_WORK(&di->chargalg_work, abx500_chargalg_work); + + /* To detect charger at startup */ + di->chg_info.prev_conn_chg = -1; + + /* Register chargalg power supply class */ + ret = power_supply_register(di->dev, &di->chargalg_psy); + if (ret) { + dev_err(di->dev, "failed to register chargalg psy\n"); + goto free_chargalg_wq; + } + + platform_set_drvdata(pdev, di); + + /* sysfs interface to enable/disable charging from user space */ + ret = abx500_chargalg_sysfs_init(di); + if (ret) { + dev_err(di->dev, "failed to create sysfs entry\n"); + goto free_psy; + } + + /* Run the charging algorithm */ + queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); + + dev_info(di->dev, "probe success\n"); + return ret; + +free_psy: + power_supply_unregister(&di->chargalg_psy); +free_chargalg_wq: + destroy_workqueue(di->chargalg_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver abx500_chargalg_driver = { + .probe = abx500_chargalg_probe, + .remove = __devexit_p(abx500_chargalg_remove), + .suspend = abx500_chargalg_suspend, + .resume = abx500_chargalg_resume, + .driver = { + .name = "abx500-chargalg", + .owner = THIS_MODULE, + }, +}; + +static int __init abx500_chargalg_init(void) +{ + return platform_driver_register(&abx500_chargalg_driver); +} + +static void __exit abx500_chargalg_exit(void) +{ + platform_driver_unregister(&abx500_chargalg_driver); +} + +module_init(abx500_chargalg_init); +module_exit(abx500_chargalg_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); +MODULE_ALIAS("platform:abx500-chargalg"); +MODULE_DESCRIPTION("abx500 battery charging algorithm"); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 9970337ff04..8344196b000 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -152,6 +152,279 @@ struct abx500_init_settings { u8 setting; }; +/* Battery driver related data */ +/* + * ADC for the battery thermistor. + * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined + * with a NTC resistor to both identify the battery and to measure its + * temperature. Different phone manufactures uses different techniques to both + * identify the battery and to read its temperature. + */ +enum abx500_adc_therm { + ABx500_ADC_THERM_BATCTRL, + ABx500_ADC_THERM_BATTEMP, +}; + +/** + * struct abx500_res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct abx500_res_to_temp { + int temp; + int resist; +}; + +/** + * struct abx500_v_to_cap - Table for translating voltage to capacity + * @voltage: Voltage in mV + * @capacity: Capacity in percent + */ +struct abx500_v_to_cap { + int voltage; + int capacity; +}; + +/* Forward declaration */ +struct abx500_fg; + +/** + * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @overbat_threshold: Over battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + */ +struct abx500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int overbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; +}; + +/** + * struct abx500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct abx500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct abx500_battery_type - different batteries supported + * @name: battery technology + * @resis_high: battery upper resistance limit + * @resis_low: battery lower resistance limit + * @charge_full_design: Maximum battery capacity in mAh + * @nominal_voltage: Nominal voltage of the battery in mV + * @termination_vol: max voltage upto which battery can be charged + * @termination_curr battery charging termination current in mA + * @recharge_vol battery voltage limit that will trigger a new + * full charging cycle in the case where maintenan- + * -ce charging has been disabled + * @normal_cur_lvl: charger current in normal state in mA + * @normal_vol_lvl: charger voltage in normal state in mV + * @maint_a_cur_lvl: charger current in maintenance A state in mA + * @maint_a_vol_lvl: charger voltage in maintenance A state in mV + * @maint_a_chg_timer_h: charge time in maintenance A state + * @maint_b_cur_lvl: charger current in maintenance B state in mA + * @maint_b_vol_lvl: charger voltage in maintenance B state in mV + * @maint_b_chg_timer_h: charge time in maintenance B state + * @low_high_cur_lvl: charger current in temp low/high state in mA + * @low_high_vol_lvl: charger voltage in temp low/high state in mV' + * @battery_resistance: battery inner resistance in mOhm. + * @n_r_t_tbl_elements: number of elements in r_to_t_tbl + * @r_to_t_tbl: table containing resistance to temp points + * @n_v_cap_tbl_elements: number of elements in v_to_cap_tbl + * @v_to_cap_tbl: Voltage to capacity (in %) table + * @n_batres_tbl_elements number of elements in the batres_tbl + * @batres_tbl battery internal resistance vs temperature table + */ +struct abx500_battery_type { + int name; + int resis_high; + int resis_low; + int charge_full_design; + int nominal_voltage; + int termination_vol; + int termination_curr; + int recharge_vol; + int normal_cur_lvl; + int normal_vol_lvl; + int maint_a_cur_lvl; + int maint_a_vol_lvl; + int maint_a_chg_timer_h; + int maint_b_cur_lvl; + int maint_b_vol_lvl; + int maint_b_chg_timer_h; + int low_high_cur_lvl; + int low_high_vol_lvl; + int battery_resistance; + int n_temp_tbl_elements; + struct abx500_res_to_temp *r_to_t_tbl; + int n_v_cap_tbl_elements; + struct abx500_v_to_cap *v_to_cap_tbl; + int n_batres_tbl_elements; + struct batres_vs_temp *batres_tbl; +}; + +/** + * struct abx500_bm_capacity_levels - abx500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct abx500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct abx500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct abx500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct abx500_bm_data - abx500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_now present battery temperature + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @abx500_adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @auto_trig flag to enable auto adc trigger + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct abx500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_now; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool chg_unknown_bat; + bool enable_overshoot; + bool auto_trig; + enum abx500_adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct abx500_maxim_parameters *maxi; + const struct abx500_bm_capacity_levels *cap_levels; + const struct abx500_battery_type *bat_type; + const struct abx500_bm_charger_parameters *chg_params; + const struct abx500_fg_parameters *fg_params; +}; + +struct abx500_chargalg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + bool autopower_cfg; +}; + +struct abx500_btemp_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_fg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_bm_plat_data { + struct abx500_bm_data *battery; + struct abx500_charger_platform_data *charger; + struct abx500_btemp_platform_data *btemp; + struct abx500_fg_platform_data *fg; + struct abx500_chargalg_platform_data *chargalg; +}; + int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h new file mode 100644 index 00000000000..9b07725750c --- /dev/null +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * Author: Johan Gardsmark for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _UX500_CHARGALG_H +#define _UX500_CHARGALG_H + +#include + +#define psy_to_ux500_charger(x) container_of((x), \ + struct ux500_charger, psy) + +/* Forward declaration */ +struct ux500_charger; + +struct ux500_charger_ops { + int (*enable) (struct ux500_charger *, int, int, int); + int (*kick_wd) (struct ux500_charger *); + int (*update_curr) (struct ux500_charger *, int); +}; + +/** + * struct ux500_charger - power supply ux500 charger sub class + * @psy power supply base class + * @ops ux500 charger operations + * @max_out_volt maximum output charger voltage in mV + * @max_out_curr maximum output charger current in mA + */ +struct ux500_charger { + struct power_supply psy; + struct ux500_charger_ops ops; + int max_out_volt; + int max_out_curr; +}; + +#endif -- cgit v1.2.3-70-g09d2 From 84edbeeab67c1575067335179513150115da367b Mon Sep 17 00:00:00 2001 From: Arun Murthy Date: Wed, 29 Feb 2012 21:54:26 +0530 Subject: ab8500-charger: AB8500 charger driver This driver is responsible for detecting the ac/usb plugin and also includes function to enable ac/usb charging and re-kick the watchdog. It registers with the power supply class and provides information to the user space. The information include status of ac/usb charger device. This information in turn will be used by the abx500 charging algorithm driver to enable/disable and monitor charging. Signed-off-by: Arun Murthy Acked-by: Linus Walleij Signed-off-by: Anton Vorontsov --- drivers/power/ab8500_charger.c | 2789 ++++++++++++++++++++++++++++++++++ include/linux/mfd/abx500/ab8500-bm.h | 554 +++++++ 2 files changed, 3343 insertions(+) create mode 100644 drivers/power/ab8500_charger.c create mode 100644 include/linux/mfd/abx500/ab8500-bm.h (limited to 'include/linux') diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c new file mode 100644 index 00000000000..bbc541a59a3 --- /dev/null +++ b/drivers/power/ab8500_charger.c @@ -0,0 +1,2789 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charger driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson + * Karl Komierowski + * Arun R Murthy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Charger constants */ +#define NO_PW_CONN 0 +#define AC_PW_CONN 1 +#define USB_PW_CONN 2 + +#define MAIN_WDOG_ENA 0x01 +#define MAIN_WDOG_KICK 0x02 +#define MAIN_WDOG_DIS 0x00 +#define CHARG_WD_KICK 0x01 +#define MAIN_CH_ENA 0x01 +#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 +#define USB_CH_ENA 0x01 +#define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 +#define MAIN_CH_DET 0x01 +#define MAIN_CH_CV_ON 0x04 +#define USB_CH_CV_ON 0x08 +#define VBUS_DET_DBNC100 0x02 +#define VBUS_DET_DBNC1 0x01 +#define OTP_ENABLE_WD 0x01 + +#define MAIN_CH_INPUT_CURR_SHIFT 4 +#define VBUS_IN_CURR_LIM_SHIFT 4 + +#define LED_INDICATOR_PWM_ENA 0x01 +#define LED_INDICATOR_PWM_DIS 0x00 +#define LED_IND_CUR_5MA 0x04 +#define LED_INDICATOR_PWM_DUTY_252_256 0xBF + +/* HW failure constants */ +#define MAIN_CH_TH_PROT 0x02 +#define VBUS_CH_NOK 0x08 +#define USB_CH_TH_PROT 0x02 +#define VBUS_OVV_TH 0x01 +#define MAIN_CH_NOK 0x01 +#define VBUS_DET 0x80 + +/* UsbLineStatus register bit masks */ +#define AB8500_USB_LINK_STATUS 0x78 +#define AB8500_STD_HOST_SUSP 0x18 + +/* Watchdog timeout constant */ +#define WD_TIMER 0x30 /* 4min */ +#define WD_KICK_INTERVAL (60 * HZ) + +/* Lowest charger voltage is 3.39V -> 0x4E */ +#define LOW_VOLT_REG 0x4E + +/* UsbLineStatus register - usb types */ +enum ab8500_charger_link_status { + USB_STAT_NOT_CONFIGURED, + USB_STAT_STD_HOST_NC, + USB_STAT_STD_HOST_C_NS, + USB_STAT_STD_HOST_C_S, + USB_STAT_HOST_CHG_NM, + USB_STAT_HOST_CHG_HS, + USB_STAT_HOST_CHG_HS_CHIRP, + USB_STAT_DEDICATED_CHG, + USB_STAT_ACA_RID_A, + USB_STAT_ACA_RID_B, + USB_STAT_ACA_RID_C_NM, + USB_STAT_ACA_RID_C_HS, + USB_STAT_ACA_RID_C_HS_CHIRP, + USB_STAT_HM_IDGND, + USB_STAT_RESERVED, + USB_STAT_NOT_VALID_LINK, +}; + +enum ab8500_usb_state { + AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ + AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ + AB8500_BM_USB_STATE_CONFIGURED, + AB8500_BM_USB_STATE_SUSPEND, + AB8500_BM_USB_STATE_RESUME, + AB8500_BM_USB_STATE_MAX, +}; + +/* VBUS input current limits supported in AB8500 in mA */ +#define USB_CH_IP_CUR_LVL_0P05 50 +#define USB_CH_IP_CUR_LVL_0P09 98 +#define USB_CH_IP_CUR_LVL_0P19 193 +#define USB_CH_IP_CUR_LVL_0P29 290 +#define USB_CH_IP_CUR_LVL_0P38 380 +#define USB_CH_IP_CUR_LVL_0P45 450 +#define USB_CH_IP_CUR_LVL_0P5 500 +#define USB_CH_IP_CUR_LVL_0P6 600 +#define USB_CH_IP_CUR_LVL_0P7 700 +#define USB_CH_IP_CUR_LVL_0P8 800 +#define USB_CH_IP_CUR_LVL_0P9 900 +#define USB_CH_IP_CUR_LVL_1P0 1000 +#define USB_CH_IP_CUR_LVL_1P1 1100 +#define USB_CH_IP_CUR_LVL_1P3 1300 +#define USB_CH_IP_CUR_LVL_1P4 1400 +#define USB_CH_IP_CUR_LVL_1P5 1500 + +#define VBAT_TRESH_IP_CUR_RED 3800 + +#define to_ab8500_charger_usb_device_info(x) container_of((x), \ + struct ab8500_charger, usb_chg) +#define to_ab8500_charger_ac_device_info(x) container_of((x), \ + struct ab8500_charger, ac_chg) + +/** + * struct ab8500_charger_interrupts - ab8500 interupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_charger_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_charger_info { + int charger_connected; + int charger_online; + int charger_voltage; + int cv_active; + bool wd_expired; +}; + +struct ab8500_charger_event_flags { + bool mainextchnotok; + bool main_thermal_prot; + bool usb_thermal_prot; + bool vbus_ovv; + bool usbchargernotok; + bool chgwdexp; + bool vbus_collapse; +}; + +struct ab8500_charger_usb_state { + bool usb_changed; + int usb_current; + enum ab8500_usb_state state; + spinlock_t usb_lock; +}; + +/** + * struct ab8500_charger - ab8500 Charger device information + * @dev: Pointer to the structure device + * @max_usb_in_curr: Max USB charger input current + * @vbus_detected: VBUS detected + * @vbus_detected_start: + * VBUS detected during startup + * @ac_conn: This will be true when the AC charger has been plugged + * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC + * charger is enabled + * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB + * charger is enabled + * @vbat Battery voltage + * @old_vbat Previously measured battery voltage + * @autopower Indicate if we should have automatic pwron after pwrloss + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @pdata: Pointer to the abx500_charger platform data + * @bat: Pointer to the abx500_bm platform data + * @flags: Structure for information about events triggered + * @usb_state: Structure for usb stack information + * @ac_chg: AC charger power supply + * @usb_chg: USB charger power supply + * @ac: Structure that holds the AC charger properties + * @usb: Structure that holds the USB charger properties + * @regu: Pointer to the struct regulator + * @charger_wq: Work queue for the IRQs and checking HW state + * @check_vbat_work Work for checking vbat threshold to adjust vbus current + * @check_hw_failure_work: Work for checking HW state + * @check_usbchgnotok_work: Work for checking USB charger not ok status + * @kick_wd_work: Work for kicking the charger watchdog in case + * of ABB rev 1.* due to the watchog logic bug + * @ac_work: Work for checking AC charger connection + * @detect_usb_type_work: Work for detecting the USB type connected + * @usb_link_status_work: Work for checking the new USB link status + * @usb_state_changed_work: Work for checking USB state + * @check_main_thermal_prot_work: + * Work for checking Main thermal status + * @check_usb_thermal_prot_work: + * Work for checking USB thermal status + */ +struct ab8500_charger { + struct device *dev; + int max_usb_in_curr; + bool vbus_detected; + bool vbus_detected_start; + bool ac_conn; + bool vddadc_en_ac; + bool vddadc_en_usb; + int vbat; + int old_vbat; + bool autopower; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct abx500_charger_platform_data *pdata; + struct abx500_bm_data *bat; + struct ab8500_charger_event_flags flags; + struct ab8500_charger_usb_state usb_state; + struct ux500_charger ac_chg; + struct ux500_charger usb_chg; + struct ab8500_charger_info ac; + struct ab8500_charger_info usb; + struct regulator *regu; + struct workqueue_struct *charger_wq; + struct delayed_work check_vbat_work; + struct delayed_work check_hw_failure_work; + struct delayed_work check_usbchgnotok_work; + struct delayed_work kick_wd_work; + struct work_struct ac_work; + struct work_struct detect_usb_type_work; + struct work_struct usb_link_status_work; + struct work_struct usb_state_changed_work; + struct work_struct check_main_thermal_prot_work; + struct work_struct check_usb_thermal_prot_work; + struct otg_transceiver *otg; + struct notifier_block nb; +}; + +/* AC properties */ +static enum power_supply_property ab8500_charger_ac_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/* USB properties */ +static enum power_supply_property ab8500_charger_usb_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/** + * ab8500_power_loss_handling - set how we handle powerloss. + * @di: pointer to the ab8500_charger structure + * + * Magic nummbers are from STE HW department. + */ +static void ab8500_power_loss_handling(struct ab8500_charger *di) +{ + u8 reg; + int ret; + + dev_dbg(di->dev, "Autopower : %d\n", di->autopower); + + /* read the autopower register */ + ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, ®); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + /* enable the OPT emulation registers */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + if (di->autopower) + reg |= 0x8; + else + reg &= ~0x8; + + /* write back the changed value to autopower reg */ + ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } + + /* disable the set OTP registers again */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + return; + } +} + +/** + * ab8500_power_supply_changed - a wrapper with local extentions for + * power_supply_changed + * @di: pointer to the ab8500_charger structure + * @psy: pointer to power_supply_that have changed. + * + */ +static void ab8500_power_supply_changed(struct ab8500_charger *di, + struct power_supply *psy) +{ + if (di->pdata->autopower_cfg) { + if (!di->usb.charger_connected && + !di->ac.charger_connected && + di->autopower) { + di->autopower = false; + ab8500_power_loss_handling(di); + } else if (!di->autopower && + (di->ac.charger_connected || + di->usb.charger_connected)) { + di->autopower = true; + ab8500_power_loss_handling(di); + } + } + power_supply_changed(psy); +} + +static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, + bool connected) +{ + if (connected != di->usb.charger_connected) { + dev_dbg(di->dev, "USB connected:%i\n", connected); + di->usb.charger_connected = connected; + sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); + } +} + +/** + * ab8500_charger_get_ac_voltage() - get ac charger voltage + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger voltage (on success) + */ +static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->ac.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed,\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_ac_cv() - check if the main charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_ac_cv(struct ab8500_charger *di) +{ + u8 val; + int ret = 0; + + /* Only check CV mode if the charger is online */ + if (di->ac.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & MAIN_CH_CV_ON) + ret = 1; + else + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_get_vbus_voltage() - get vbus voltage + * @di: pointer to the ab8500_charger structure + * + * This function returns the vbus voltage. + * Returns vbus voltage (on success) + */ +static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->usb.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_get_usb_current() - get usb charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the usb charger current. + * Returns usb current (on success) and error code on failure + */ +static int ab8500_charger_get_usb_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->usb.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_get_ac_current() - get ac charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the ac charger current. + * Returns ac current (on success) and error code on failure. + */ +static int ab8500_charger_get_ac_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->ac.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_usb_cv() - check if the usb charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_usb_cv(struct ab8500_charger *di) +{ + int ret; + u8 val; + + /* Only check CV mode if the charger is online */ + if (di->usb.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & USB_CH_CV_ON) + ret = 1; + else + ret = 0; + } else { + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_detect_chargers() - Detect the connected chargers + * @di: pointer to the ab8500_charger structure + * + * Returns the type of charger connected. + * For USB it will not mean we can actually charge from it + * but that there is a USB cable connected that we have to + * identify. This is used during startup when we don't get + * interrupts of the charger detection + * + * Returns an integer value, that means, + * NO_PW_CONN no power supply is connected + * AC_PW_CONN if the AC power supply is connected + * USB_PW_CONN if the USB power supply is connected + * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected + */ +static int ab8500_charger_detect_chargers(struct ab8500_charger *di) +{ + int result = NO_PW_CONN; + int ret; + u8 val; + + /* Check for AC charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if (val & MAIN_CH_DET) + result = AC_PW_CONN; + + /* Check for USB charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) + result |= USB_PW_CONN; + + return result; +} + +/** + * ab8500_charger_max_usb_curr() - get the max curr for the USB type + * @di: pointer to the ab8500_charger structure + * @link_status: the identified USB type + * + * Get the maximum current that is allowed to be drawn from the host + * based on the USB type. + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, + enum ab8500_charger_link_status link_status) +{ + int ret = 0; + + switch (link_status) { + case USB_STAT_STD_HOST_NC: + case USB_STAT_STD_HOST_C_NS: + case USB_STAT_STD_HOST_C_S: + dev_dbg(di->dev, "USB Type - Standard host is " + "detected through USB driver\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + break; + case USB_STAT_HOST_CHG_HS_CHIRP: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + case USB_STAT_HOST_CHG_HS: + case USB_STAT_ACA_RID_C_HS: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; + break; + case USB_STAT_ACA_RID_A: + /* + * Dedicated charger level minus maximum current accessory + * can consume (300mA). Closest level is 1100mA + */ + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1; + break; + case USB_STAT_ACA_RID_B: + /* + * Dedicated charger level minus 120mA (20mA for ACA and + * 100mA for potential accessory). Closest level is 1300mA + */ + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; + break; + case USB_STAT_DEDICATED_CHG: + case USB_STAT_HOST_CHG_NM: + case USB_STAT_ACA_RID_C_HS_CHIRP: + case USB_STAT_ACA_RID_C_NM: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + break; + case USB_STAT_RESERVED: + /* + * This state is used to indicate that VBUS has dropped below + * the detection level 4 times in a row. This is due to the + * charger output current is set to high making the charger + * voltage collapse. This have to be propagated through to + * chargalg. This is done using the property + * POWER_SUPPLY_PROP_CURRENT_AVG = 1 + */ + di->flags.vbus_collapse = true; + dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED " + "VBUS has collapsed\n"); + ret = -1; + break; + case USB_STAT_HM_IDGND: + case USB_STAT_NOT_CONFIGURED: + case USB_STAT_NOT_VALID_LINK: + dev_err(di->dev, "USB Type - Charging not allowed\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + default: + dev_err(di->dev, "USB Type - Unknown\n"); + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + }; + + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", + link_status, di->max_usb_in_curr); + + return ret; +} + +/** + * ab8500_charger_read_usb_type() - read the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_read_usb_type(struct ab8500_charger *di) +{ + int ret; + u8 val; + + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + /* get the USB type */ + val = (val & AB8500_USB_LINK_STATUS) >> 3; + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/** + * ab8500_charger_detect_usb_type() - get the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) +{ + int i, ret; + u8 val; + + /* + * On getting the VBUS rising edge detect interrupt there + * is a 250ms delay after which the register UsbLineStatus + * is filled with valid data. + */ + for (i = 0; i < 10; i++) { + msleep(250); + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, + &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + /* + * Until the IT source register is read the UsbLineStatus + * register is not updated, hence doing the same + * Revisit this: + */ + + /* get the USB type */ + val = (val & AB8500_USB_LINK_STATUS) >> 3; + if (val) + break; + } + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/* + * This array maps the raw hex value to charger voltage used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_voltage_map[] = { + 3500 , + 3525 , + 3550 , + 3575 , + 3600 , + 3625 , + 3650 , + 3675 , + 3700 , + 3725 , + 3750 , + 3775 , + 3800 , + 3825 , + 3850 , + 3875 , + 3900 , + 3925 , + 3950 , + 3975 , + 4000 , + 4025 , + 4050 , + 4060 , + 4070 , + 4080 , + 4090 , + 4100 , + 4110 , + 4120 , + 4130 , + 4140 , + 4150 , + 4160 , + 4170 , + 4180 , + 4190 , + 4200 , + 4210 , + 4220 , + 4230 , + 4240 , + 4250 , + 4260 , + 4270 , + 4280 , + 4290 , + 4300 , + 4310 , + 4320 , + 4330 , + 4340 , + 4350 , + 4360 , + 4370 , + 4380 , + 4390 , + 4400 , + 4410 , + 4420 , + 4430 , + 4440 , + 4450 , + 4460 , + 4470 , + 4480 , + 4490 , + 4500 , + 4510 , + 4520 , + 4530 , + 4540 , + 4550 , + 4560 , + 4570 , + 4580 , + 4590 , + 4600 , +}; + +/* + * This array maps the raw hex value to charger current used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_current_map[] = { + 100 , + 200 , + 300 , + 400 , + 500 , + 600 , + 700 , + 800 , + 900 , + 1000 , + 1100 , + 1200 , + 1300 , + 1400 , + 1500 , +}; + +/* + * This array maps the raw hex value to VBUS input current used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_vbus_in_curr_map[] = { + USB_CH_IP_CUR_LVL_0P05, + USB_CH_IP_CUR_LVL_0P09, + USB_CH_IP_CUR_LVL_0P19, + USB_CH_IP_CUR_LVL_0P29, + USB_CH_IP_CUR_LVL_0P38, + USB_CH_IP_CUR_LVL_0P45, + USB_CH_IP_CUR_LVL_0P5, + USB_CH_IP_CUR_LVL_0P6, + USB_CH_IP_CUR_LVL_0P7, + USB_CH_IP_CUR_LVL_0P8, + USB_CH_IP_CUR_LVL_0P9, + USB_CH_IP_CUR_LVL_1P0, + USB_CH_IP_CUR_LVL_1P1, + USB_CH_IP_CUR_LVL_1P3, + USB_CH_IP_CUR_LVL_1P4, + USB_CH_IP_CUR_LVL_1P5, +}; + +static int ab8500_voltage_to_regval(int voltage) +{ + int i; + + /* Special case for voltage below 3.5V */ + if (voltage < ab8500_charger_voltage_map[0]) + return LOW_VOLT_REG; + + for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { + if (voltage < ab8500_charger_voltage_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; + if (voltage == ab8500_charger_voltage_map[i]) + return i; + else + return -1; +} + +static int ab8500_current_to_regval(int curr) +{ + int i; + + if (curr < ab8500_charger_current_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) { + if (curr < ab8500_charger_current_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_current_map) - 1; + if (curr == ab8500_charger_current_map[i]) + return i; + else + return -1; +} + +static int ab8500_vbus_in_curr_to_regval(int curr) +{ + int i; + + if (curr < ab8500_charger_vbus_in_curr_map[0]) + return 0; + + for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) { + if (curr < ab8500_charger_vbus_in_curr_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1; + if (curr == ab8500_charger_vbus_in_curr_map[i]) + return i; + else + return -1; +} + +/** + * ab8500_charger_get_usb_cur() - get usb current + * @di: pointer to the ab8500_charger structre + * + * The usb stack provides the maximum current that can be drawn from + * the standard usb host. This will be in mA. + * This function converts current in mA to a value that can be written + * to the register. Returns -1 if charging is not allowed + */ +static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) +{ + switch (di->usb_state.usb_current) { + case 100: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + break; + case 200: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19; + break; + case 300: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29; + break; + case 400: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38; + break; + case 500: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + break; + default: + di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + return -1; + break; + }; + return 0; +} + +/** + * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit + * @di: pointer to the ab8500_charger structure + * @ich_in: charger input current limit + * + * Sets the current that can be drawn from the USB host + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, + int ich_in) +{ + int ret; + int input_curr_index; + int min_value; + + /* We should always use to lowest current limit */ + min_value = min(di->bat->chg_params->usb_curr_max, ich_in); + + switch (min_value) { + case 100: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P05; + break; + case 500: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P45; + break; + default: + break; + } + + input_curr_index = ab8500_vbus_in_curr_to_regval(min_value); + if (input_curr_index < 0) { + dev_err(di->dev, "VBUS input current limit too high\n"); + return -ENXIO; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_IPT_CRNTLVL_REG, + input_curr_index << VBUS_IN_CURR_LIM_SHIFT); + if (ret) + dev_err(di->dev, "%s write failed\n", __func__); + + return ret; +} + +/** + * ab8500_charger_led_en() - turn on/off chargign led + * @di: pointer to the ab8500_charger structure + * @on: flag to turn on/off the chargign led + * + * Power ON/OFF charging LED indication + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_led_en(struct ab8500_charger *di, int on) +{ + int ret; + + if (on) { + /* Power ON charging LED indicator, set LED current to 5mA */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); + if (ret) { + dev_err(di->dev, "Power ON LED failed\n"); + return ret; + } + /* LED indicator PWM duty cycle 252/256 */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_DUTY, + LED_INDICATOR_PWM_DUTY_252_256); + if (ret) { + dev_err(di->dev, "Set LED PWM duty cycle failed\n"); + return ret; + } + } else { + /* Power off charging LED indicator */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + LED_INDICATOR_PWM_DIS); + if (ret) { + dev_err(di->dev, "Power-off LED failed\n"); + return ret; + } + } + + return ret; +} + +/** + * ab8500_charger_ac_en() - enable or disable ac charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @iset: charging current + * + * Enable/Disable AC/Mains charging and turns on/off the charging led + * respectively. + **/ +static int ab8500_charger_ac_en(struct ux500_charger *charger, + int enable, int vset, int iset) +{ + int ret; + int volt_index; + int curr_index; + int input_curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); + + if (enable) { + /* Check if AC is connected */ + if (!di->ac.charger_connected) { + dev_err(di->dev, "AC charger not connected\n"); + return -ENXIO; + } + + /* Enable AC charging */ + dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_ac) { + regulator_enable(di->regu); + di->vddadc_en_ac = true; + } + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(iset); + input_curr_index = ab8500_current_to_regval( + di->bat->chg_params->ac_curr_max); + if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: maximum battery charging voltage */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* MainChInputCurr: current that can be drawn from the charger*/ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_IPT_CURLVL_REG, + input_curr_index << MAIN_CH_INPUT_CURR_SHIFT); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Check if VBAT overshoot control should be enabled */ + if (!di->bat->enable_overshoot) + overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; + + /* Enable Main Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + di->ac.charger_online = 1; + } else { + /* Disable AC charging */ + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB revision 1.0 and 1.1 there is a bug in the + * watchdog logic. That means we have to continously + * kick the charger watchdog even when no charger is + * connected. This is only valid once the AC charger + * has been enabled. This is a bug that is not handled + * by the algorithm and the watchdog have to be kicked + * by the charger driver when the AC charger + * is disabled + */ + if (di->ac_conn) { + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + + /* + * We can't turn off charging completely + * due to a bug in AB8500 cut1. + * If we do, charging will not start again. + * That is why we set the lowest voltage + * and current possible + */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } else { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_MCH_CTRL1, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->ac.charger_online = 0; + di->ac.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_ac) { + regulator_disable(di->regu); + di->vddadc_en_ac = false; + } + + dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); + } + ab8500_power_supply_changed(di, &di->ac_chg.psy); + + return ret; +} + +/** + * ab8500_charger_usb_en() - enable usb charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @ich_out: charger output current + * + * Enable/Disable USB charging and turns on/off the charging led respectively. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_en(struct ux500_charger *charger, + int enable, int vset, int ich_out) +{ + int ret; + int volt_index; + int curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); + + if (enable) { + /* Check if USB is connected */ + if (!di->usb.charger_connected) { + dev_err(di->dev, "USB charger not connected\n"); + return -ENXIO; + } + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_usb) { + regulator_enable(di->regu); + di->vddadc_en_usb = true; + } + + /* Enable USB charging */ + dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(ich_out); + if (volt_index < 0 || curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: max voltage upto which battery can be charged */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* Check if VBAT overshoot control should be enabled */ + if (!di->bat->enable_overshoot) + overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; + + /* Enable USB Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* If success power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); + + di->usb.charger_online = 1; + } else { + /* Disable USB charging */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->usb.charger_online = 0; + di->usb.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_usb) { + regulator_disable(di->regu); + di->vddadc_en_usb = false; + } + + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); + + /* Cancel any pending Vbat check work */ + if (delayed_work_pending(&di->check_vbat_work)) + cancel_delayed_work(&di->check_vbat_work); + + } + ab8500_power_supply_changed(di, &di->usb_chg.psy); + + return ret; +} + +/** + * ab8500_charger_watchdog_kick() - kick charger watchdog + * @di: pointer to the ab8500_charger structure + * + * Kick charger watchdog + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + return ret; +} + +/** + * ab8500_charger_update_charger_current() - update charger current + * @di: pointer to the ab8500_charger structure + * + * Update the charger output current for the specified charger + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_update_charger_current(struct ux500_charger *charger, + int ich_out) +{ + int ret; + int curr_index; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + curr_index = ab8500_current_to_regval(ich_out); + if (curr_index < 0) { + dev_err(di->dev, + "Charger current too high, " + "charging not started\n"); + return -ENXIO; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Reset the main and usb drop input current measurement counter */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARGER_CTRL, + 0x1); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + +static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_charger *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + struct ux500_charger *usb_chg; + + usb_chg = (struct ux500_charger *)data; + psy = &usb_chg->psy; + + di = to_ab8500_charger_usb_device_info(usb_chg); + + ext = dev_get_drvdata(dev); + + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->num_properties; j++) { + enum power_supply_property prop; + prop = ext->properties[j]; + + if (ext->get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->vbat = ret.intval / 1000; + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_charger_check_vbat_work() - keep vbus current within spec + * @work pointer to the work_struct structure + * + * Due to a asic bug it is necessary to lower the input current to the vbus + * charger when charging with at some specific levels. This issue is only valid + * for below a certain battery voltage. This function makes sure that the + * the allowed current limit isn't exceeded. + */ +static void ab8500_charger_check_vbat_work(struct work_struct *work) +{ + int t = 10; + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_vbat_work.work); + + class_for_each_device(power_supply_class, NULL, + &di->usb_chg.psy, ab8500_charger_get_ext_psy_data); + + /* First run old_vbat is 0. */ + if (di->old_vbat == 0) + di->old_vbat = di->vbat; + + if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && + di->vbat <= VBAT_TRESH_IP_CUR_RED) || + (di->old_vbat > VBAT_TRESH_IP_CUR_RED && + di->vbat > VBAT_TRESH_IP_CUR_RED))) { + + dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," + " old: %d\n", di->max_usb_in_curr, di->vbat, + di->old_vbat); + ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + power_supply_changed(&di->usb_chg.psy); + } + + di->old_vbat = di->vbat; + + /* + * No need to check the battery voltage every second when not close to + * the threshold. + */ + if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && + (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) + t = 1; + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); +} + +/** + * ab8500_charger_check_hw_failure_work() - check main charger failure + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_check_hw_failure_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_hw_failure_work.work); + + /* Check if the status bits for HW failure is still active */ + if (di->flags.mainextchnotok) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & MAIN_CH_NOK)) { + di->flags.mainextchnotok = false; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + } + } + if (di->flags.vbus_ovv) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & VBUS_OVV_TH)) { + di->flags.vbus_ovv = false; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + } + /* If we still have a failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, round_jiffies(HZ)); + } +} + +/** + * ab8500_charger_kick_watchdog_work() - kick the watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog. + * + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ +static void ab8500_charger_kick_watchdog_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, kick_wd_work.work); + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* Schedule a new watchdog kick */ + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); +} + +/** + * ab8500_charger_ac_work() - work to get and set main charger status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_ac_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, ac_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if the main charger is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (ret & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + } else { + di->ac.charger_connected = 0; + } + + ab8500_power_supply_changed(di, &di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); +} + +/** + * ab8500_charger_detect_usb_type_work() - work to detect USB type + * @work: Pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +void ab8500_charger_detect_usb_type_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, detect_usb_type_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + di->vbus_detected = 0; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else { + di->vbus_detected = 1; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, + &di->usb_chg.psy); + } + } else { + /* For ABB cut2.0 and onwards we have an IRQ, + * USB_LINK_STATUS that will be triggered when the USB + * link status changes. The exception is USB connected + * during startup. Then we don't get a + * USB_LINK_STATUS IRQ + */ + if (di->vbus_detected_start) { + di->vbus_detected_start = false; + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, + true); + ab8500_power_supply_changed(di, + &di->usb_chg.psy); + } + } + } + } +} + +/** + * ab8500_charger_usb_link_status_work() - work to detect USB type + * @work: pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_usb_link_status_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_link_status_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + di->vbus_detected = 0; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else { + di->vbus_detected = 1; + ret = ab8500_charger_read_usb_type(di); + if (!ret) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } else if (ret == -ENXIO) { + /* No valid charger type detected */ + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + } +} + +static void ab8500_charger_usb_state_changed_work(struct work_struct *work) +{ + int ret; + unsigned long flags; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_state_changed_work); + + if (!di->vbus_detected) + return; + + spin_lock_irqsave(&di->usb_state.usb_lock, flags); + di->usb_state.usb_changed = false; + spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); + + /* + * wait for some time until you get updates from the usb stack + * and negotiations are completed + */ + msleep(250); + + if (di->usb_state.usb_changed) + return; + + dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", + __func__, di->usb_state.state, di->usb_state.usb_current); + + switch (di->usb_state.state) { + case AB8500_BM_USB_STATE_RESET_HS: + case AB8500_BM_USB_STATE_RESET_FS: + case AB8500_BM_USB_STATE_SUSPEND: + case AB8500_BM_USB_STATE_MAX: + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + break; + + case AB8500_BM_USB_STATE_RESUME: + /* + * when suspend->resume there should be delay + * of 1sec for enabling charging + */ + msleep(1000); + /* Intentional fall through */ + case AB8500_BM_USB_STATE_CONFIGURED: + /* + * USB is configured, enable charging with the charging + * input current obtained from USB driver + */ + if (!ab8500_charger_get_usb_cur(di)) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + break; + + default: + break; + }; +} + +/** + * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB charger Not OK status + */ +static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + bool prev_status; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usbchgnotok_work.work); + + /* Check if the status bit for usbchargernotok is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + prev_status = di->flags.usbchargernotok; + + if (reg_value & VBUS_CH_NOK) { + di->flags.usbchargernotok = true; + /* Check again in 1sec */ + queue_delayed_work(di->charger_wq, + &di->check_usbchgnotok_work, HZ); + } else { + di->flags.usbchargernotok = false; + di->flags.vbus_collapse = false; + } + + if (prev_status != di->flags.usbchargernotok) + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** + * ab8500_charger_check_main_thermal_prot_work() - check main thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the Main thermal prot status + */ +static void ab8500_charger_check_main_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_main_thermal_prot_work); + + /* Check if the status bit for main_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & MAIN_CH_TH_PROT) + di->flags.main_thermal_prot = true; + else + di->flags.main_thermal_prot = false; + + ab8500_power_supply_changed(di, &di->ac_chg.psy); +} + +/** + * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB thermal prot status + */ +static void ab8500_charger_check_usb_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usb_thermal_prot_work); + + /* Check if the status bit for usb_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & USB_CH_TH_PROT) + di->flags.usb_thermal_prot = true; + else + di->flags.usb_thermal_prot = false; + + ab8500_power_supply_changed(di, &di->usb_chg.psy); +} + +/** + * ab8500_charger_mainchunplugdet_handler() - main charger unplugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger unplugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchplugdet_handler() - main charger plugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger plugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainextchnotok_handler() - main charger not ok + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger not ok\n"); + di->flags.mainextchnotok = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetf_handler() - VBUS falling detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS falling detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetr_handler() - VBUS rising detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + di->vbus_detected = true; + dev_dbg(di->dev, "VBUS rising detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usblinkstatus_handler() - USB link status has changed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "USB link status changed\n"); + + queue_work(di->charger_wq, &di->usb_link_status_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Not allowed USB charger detected\n"); + queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_chwdexp_handler() - Charger watchdog expired + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Charger watchdog expired\n"); + + /* + * The charger that was online when the watchdog expired + * needs to be restarted for charging to start again + */ + if (di->ac.charger_online) { + di->ac.wd_expired = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + } + if (di->usb.charger_online) { + di->usb.wd_expired = true; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS overvoltage detected\n"); + di->flags.vbus_ovv = true; + ab8500_power_supply_changed(di, &di->usb_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_ac_get_property() - get the ac/mains properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the ac/mains + * properties by reading the sysfs files. + * AC/Mains properties are online, present and voltage. + * online: ac/mains charging is in progress or not + * present: presence of the ac/mains + * voltage: AC/Mains voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + + di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.mainextchnotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.main_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->ac.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->ac.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di); + val->intval = di->ac.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the AC charger + */ + di->ac.cv_active = ab8500_charger_ac_cv(di); + val->intval = di->ac.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ab8500_charger_get_ac_current(di) * 1000; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_usb_get_property() - get the usb properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the usb + * properties by reading the sysfs files. + * USB properties are online, present and voltage. + * online: usb charging is in progress or not + * present: presence of the usb + * voltage: vbus voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + + di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.usbchargernotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.usb_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (di->flags.vbus_ovv) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->usb.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->usb.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di); + val->intval = di->usb.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the USB charger + */ + di->usb.cv_active = ab8500_charger_usb_cv(di); + val->intval = di->usb.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ab8500_charger_get_usb_current(di) * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + /* + * This property is used to indicate when VBUS has collapsed + * due to too high output current from the USB charger + */ + if (di->flags.vbus_collapse) + val->intval = 1; + else + val->intval = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_init_hw_registers() - Set up charger related registers + * @di: pointer to the ab8500_charger structure + * + * Set up charger OVV, watchdog and maximum voltage registers as well as + * charging of the backup battery + */ +static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) +{ + int ret = 0; + + /* Setup maximum charger current and voltage for ABB cut2.0 */ + if (!is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_VOLT_LVL_MAX_REG\n"); + goto out; + } + + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); + goto out; + } + } + + /* VBUS OVV set to 6.3V and enable automatic current limitiation */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); + if (ret) { + dev_err(di->dev, "failed to set VBUS OVV\n"); + goto out; + } + + /* Enable main watchdog in OTP */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); + if (ret) { + dev_err(di->dev, "failed to enable main WD in OTP\n"); + goto out; + } + + /* Enable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); + if (ret) { + dev_err(di->dev, "faile to enable main watchdog\n"); + goto out; + } + + /* + * Due to internal synchronisation, Enable and Kick watchdog bits + * cannot be enabled in a single write. + * A minimum delay of 2*32 kHz period (62.5µs) must be inserted + * between writing Enable then Kick bits. + */ + udelay(63); + + /* Kick main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, + (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); + if (ret) { + dev_err(di->dev, "failed to kick main watchdog\n"); + goto out; + } + + /* Disable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); + if (ret) { + dev_err(di->dev, "failed to disable main watchdog\n"); + goto out; + } + + /* Set watchdog timeout */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_WD_TIMER_REG, WD_TIMER); + if (ret) { + dev_err(di->dev, "failed to set charger watchdog timeout\n"); + goto out; + } + + /* Backup battery voltage and current */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_RTC, + AB8500_RTC_BACKUP_CHG_REG, + di->bat->bkup_bat_v | + di->bat->bkup_bat_i); + if (ret) { + dev_err(di->dev, "failed to setup backup battery charging\n"); + goto out; + } + + /* Enable backup battery charging */ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, + RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + +out: + return ret; +} + +/* + * ab8500 charger driver interrupts and their respective isr + */ +static struct ab8500_charger_interrupts ab8500_charger_irq[] = { + {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, + {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, + {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, + {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, + {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, + {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, + {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, + {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, + {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, + {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, + {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, + {"VBUS_OVV", ab8500_charger_vbusovv_handler}, + {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, +}; + +static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, + unsigned long event, void *power) +{ + struct ab8500_charger *di = + container_of(nb, struct ab8500_charger, nb); + enum ab8500_usb_state bm_usb_state; + unsigned mA = *((unsigned *)power); + + if (event != USB_EVENT_VBUS) { + dev_dbg(di->dev, "not a standard host, returning\n"); + return NOTIFY_DONE; + } + + /* TODO: State is fabricate here. See if charger really needs USB + * state or if mA is enough + */ + if ((di->usb_state.usb_current == 2) && (mA > 2)) + bm_usb_state = AB8500_BM_USB_STATE_RESUME; + else if (mA == 0) + bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; + else if (mA == 2) + bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; + else if (mA >= 8) /* 8, 100, 500 */ + bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; + else /* Should never occur */ + bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; + + dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", + __func__, bm_usb_state, mA); + + spin_lock(&di->usb_state.usb_lock); + di->usb_state.usb_changed = true; + spin_unlock(&di->usb_state.usb_lock); + + di->usb_state.state = bm_usb_state; + di->usb_state.usb_current = mA; + + queue_work(di->charger_wq, &di->usb_state_changed_work); + + return NOTIFY_OK; +} + +#if defined(CONFIG_PM) +static int ab8500_charger_resume(struct platform_device *pdev) +{ + int ret; + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* If not already pending start a new timer */ + if (!delayed_work_pending( + &di->kick_wd_work)) { + queue_delayed_work(di->charger_wq, &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + } + + /* If we still have a HW failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, 0); + } + + return 0; +} + +static int ab8500_charger_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* Cancel any pending HW failure check */ + if (delayed_work_pending(&di->check_hw_failure_work)) + cancel_delayed_work(&di->check_hw_failure_work); + + return 0; +} +#else +#define ab8500_charger_suspend NULL +#define ab8500_charger_resume NULL +#endif + +static int __devexit ab8500_charger_remove(struct platform_device *pdev) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + int i, irq, ret; + + /* Disable AC charging */ + ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); + + /* Disable USB charging */ + ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } + + /* disable the regulator */ + regulator_put(di->regu); + + /* Backup battery voltage and current disable */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + + otg_unregister_notifier(di->otg, &di->nb); + otg_put_transceiver(di->otg); + + /* Delete the work queue */ + destroy_workqueue(di->charger_wq); + + flush_scheduled_work(); + power_supply_unregister(&di->usb_chg.psy); + power_supply_unregister(&di->ac_chg.psy); + platform_set_drvdata(pdev, NULL); + kfree(di); + + return 0; +} + +static int __devinit ab8500_charger_probe(struct platform_device *pdev) +{ + int irq, i, charger_status, ret = 0; + struct abx500_bm_plat_data *plat_data; + + struct ab8500_charger *di = + kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL); + if (!di) + return -ENOMEM; + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* initialize lock */ + spin_lock_init(&di->usb_state.usb_lock); + + /* get charger specific platform data */ + plat_data = pdev->dev.platform_data; + di->pdata = plat_data->charger; + + if (!di->pdata) { + dev_err(di->dev, "no charger platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + /* get battery specific platform data */ + di->bat = plat_data->battery; + if (!di->bat) { + dev_err(di->dev, "no battery platform data supplied\n"); + ret = -EINVAL; + goto free_device_info; + } + + di->autopower = false; + + /* AC supply */ + /* power_supply base class */ + di->ac_chg.psy.name = "ab8500_ac"; + di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; + di->ac_chg.psy.properties = ab8500_charger_ac_props; + di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); + di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; + di->ac_chg.psy.supplied_to = di->pdata->supplied_to; + di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants; + /* ux500_charger sub-class */ + di->ac_chg.ops.enable = &ab8500_charger_ac_en; + di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->ac_chg.max_out_curr = ab8500_charger_current_map[ + ARRAY_SIZE(ab8500_charger_current_map) - 1]; + + /* USB supply */ + /* power_supply base class */ + di->usb_chg.psy.name = "ab8500_usb"; + di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB; + di->usb_chg.psy.properties = ab8500_charger_usb_props; + di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); + di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; + di->usb_chg.psy.supplied_to = di->pdata->supplied_to; + di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants; + /* ux500_charger sub-class */ + di->usb_chg.ops.enable = &ab8500_charger_usb_en; + di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->usb_chg.max_out_curr = ab8500_charger_current_map[ + ARRAY_SIZE(ab8500_charger_current_map) - 1]; + + + /* Create a work queue for the charger */ + di->charger_wq = + create_singlethread_workqueue("ab8500_charger_wq"); + if (di->charger_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + goto free_device_info; + } + + /* Init work for HW failure check */ + INIT_DELAYED_WORK_DEFERRABLE(&di->check_hw_failure_work, + ab8500_charger_check_hw_failure_work); + INIT_DELAYED_WORK_DEFERRABLE(&di->check_usbchgnotok_work, + ab8500_charger_check_usbchargernotok_work); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + INIT_DELAYED_WORK_DEFERRABLE(&di->kick_wd_work, + ab8500_charger_kick_watchdog_work); + + INIT_DELAYED_WORK_DEFERRABLE(&di->check_vbat_work, + ab8500_charger_check_vbat_work); + + /* Init work for charger detection */ + INIT_WORK(&di->usb_link_status_work, + ab8500_charger_usb_link_status_work); + INIT_WORK(&di->ac_work, ab8500_charger_ac_work); + INIT_WORK(&di->detect_usb_type_work, + ab8500_charger_detect_usb_type_work); + + INIT_WORK(&di->usb_state_changed_work, + ab8500_charger_usb_state_changed_work); + + /* Init work for checking HW status */ + INIT_WORK(&di->check_main_thermal_prot_work, + ab8500_charger_check_main_thermal_prot_work); + INIT_WORK(&di->check_usb_thermal_prot_work, + ab8500_charger_check_usb_thermal_prot_work); + + /* + * VDD ADC supply needs to be enabled from this driver when there + * is a charger connected to avoid erroneous BTEMP_HIGH/LOW + * interrupts during charging + */ + di->regu = regulator_get(di->dev, "vddadc"); + if (IS_ERR(di->regu)) { + ret = PTR_ERR(di->regu); + dev_err(di->dev, "failed to get vddadc regulator\n"); + goto free_charger_wq; + } + + + /* Initialize OVV, and other registers */ + ret = ab8500_charger_init_hw_registers(di); + if (ret) { + dev_err(di->dev, "failed to initialize ABB registers\n"); + goto free_regulator; + } + + /* Register AC charger class */ + ret = power_supply_register(di->dev, &di->ac_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register AC charger\n"); + goto free_regulator; + } + + /* Register USB charger class */ + ret = power_supply_register(di->dev, &di->usb_chg.psy); + if (ret) { + dev_err(di->dev, "failed to register USB charger\n"); + goto free_ac; + } + + di->otg = otg_get_transceiver(); + if (!di->otg) { + dev_err(di->dev, "failed to get otg transceiver\n"); + ret = -EINVAL; + goto free_usb; + } + di->nb.notifier_call = ab8500_charger_usb_notifier_call; + ret = otg_register_notifier(di->otg, &di->nb); + if (ret) { + dev_err(di->dev, "failed to register otg notifier\n"); + goto put_otg_transceiver; + } + + /* Identify the connected charger types during startup */ + charger_status = ab8500_charger_detect_chargers(di); + if (charger_status & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + ab8500_power_supply_changed(di, &di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); + } + + if (charger_status & USB_PW_CONN) { + dev_dbg(di->dev, "VBUS Detect during startup\n"); + di->vbus_detected = true; + di->vbus_detected_start = true; + queue_work(di->charger_wq, + &di->detect_usb_type_work); + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_charger_irq[i].name, di); + + if (ret != 0) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_charger_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_charger_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + return ret; + +free_irq: + otg_unregister_notifier(di->otg, &di->nb); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } +put_otg_transceiver: + otg_put_transceiver(di->otg); +free_usb: + power_supply_unregister(&di->usb_chg.psy); +free_ac: + power_supply_unregister(&di->ac_chg.psy); +free_regulator: + regulator_put(di->regu); +free_charger_wq: + destroy_workqueue(di->charger_wq); +free_device_info: + kfree(di); + + return ret; +} + +static struct platform_driver ab8500_charger_driver = { + .probe = ab8500_charger_probe, + .remove = __devexit_p(ab8500_charger_remove), + .suspend = ab8500_charger_suspend, + .resume = ab8500_charger_resume, + .driver = { + .name = "ab8500-charger", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_charger_init(void) +{ + return platform_driver_register(&ab8500_charger_driver); +} + +static void __exit ab8500_charger_exit(void) +{ + platform_driver_unregister(&ab8500_charger_driver); +} + +subsys_initcall_sync(ab8500_charger_init); +module_exit(ab8500_charger_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-charger"); +MODULE_DESCRIPTION("AB8500 charger management driver"); diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h new file mode 100644 index 00000000000..4b7342c54b4 --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -0,0 +1,554 @@ +/* + * Copyright ST-Ericsson 2012. + * + * Author: Arun Murthy + * Licensed under GPLv2. + */ + +#ifndef _AB8500_BM_H +#define _AB8500_BM_H + +#include + +/* + * System control 2 register offsets. + * bank = 0x02 + */ +#define AB8500_MAIN_WDOG_CTRL_REG 0x01 +#define AB8500_LOW_BAT_REG 0x03 +#define AB8500_BATT_OK_REG 0x04 +/* + * USB/ULPI register offsets + * Bank : 0x5 + */ +#define AB8500_USB_LINE_STAT_REG 0x80 + +/* + * Charger / status register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_STATUS1_REG 0x00 +#define AB8500_CH_STATUS2_REG 0x01 +#define AB8500_CH_USBCH_STAT1_REG 0x02 +#define AB8500_CH_USBCH_STAT2_REG 0x03 +#define AB8500_CH_FSM_STAT_REG 0x04 +#define AB8500_CH_STAT_REG 0x05 + +/* + * Charger / control register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_VOLT_LVL_REG 0x40 +#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/ +#define AB8500_CH_OPT_CRNTLVL_REG 0x42 +#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/ +#define AB8500_CH_WD_TIMER_REG 0x50 +#define AB8500_CHARG_WD_CTRL 0x51 +#define AB8500_BTEMP_HIGH_TH 0x52 +#define AB8500_LED_INDICATOR_PWM_CTRL 0x53 +#define AB8500_LED_INDICATOR_PWM_DUTY 0x54 +#define AB8500_BATT_OVV 0x55 +#define AB8500_CHARGER_CTRL 0x56 +#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/ + +/* + * Charger / main control register offsets + * Bank : 0x0B + */ +#define AB8500_MCH_CTRL1 0x80 +#define AB8500_MCH_CTRL2 0x81 +#define AB8500_MCH_IPT_CURLVL_REG 0x82 +#define AB8500_CH_WD_REG 0x83 + +/* + * Charger / USB control register offsets + * Bank : 0x0B + */ +#define AB8500_USBCH_CTRL1_REG 0xC0 +#define AB8500_USBCH_CTRL2_REG 0xC1 +#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 + +/* + * Gas Gauge register offsets + * Bank : 0x0C + */ +#define AB8500_GASG_CC_CTRL_REG 0x00 +#define AB8500_GASG_CC_ACCU1_REG 0x01 +#define AB8500_GASG_CC_ACCU2_REG 0x02 +#define AB8500_GASG_CC_ACCU3_REG 0x03 +#define AB8500_GASG_CC_ACCU4_REG 0x04 +#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05 +#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06 +#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07 +#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08 +#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09 +#define AB8500_GASG_CC_OFFSET_REG 0x0A +#define AB8500_GASG_CC_NCOV_ACCU 0x10 +#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11 +#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12 +#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13 +#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14 + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB8500_IT_SOURCE2_REG 0x01 +#define AB8500_IT_SOURCE21_REG 0x14 + +/* + * RTC register offsets + * Bank: 0x0F + */ +#define AB8500_RTC_BACKUP_CHG_REG 0x0C +#define AB8500_RTC_CC_CONF_REG 0x01 +#define AB8500_RTC_CTRL_REG 0x0B + +/* + * OTP register offsets + * Bank : 0x15 + */ +#define AB8500_OTP_CONF_15 0x0E + +/* GPADC constants from AB8500 spec, UM0836 */ +#define ADC_RESOLUTION 1024 +#define ADC_CH_MAIN_MIN 0 +#define ADC_CH_MAIN_MAX 20030 +#define ADC_CH_VBUS_MIN 0 +#define ADC_CH_VBUS_MAX 20030 +#define ADC_CH_VBAT_MIN 2300 +#define ADC_CH_VBAT_MAX 4800 +#define ADC_CH_BKBAT_MIN 0 +#define ADC_CH_BKBAT_MAX 3200 + +/* Main charge i/p current */ +#define MAIN_CH_IP_CUR_0P9A 0x80 +#define MAIN_CH_IP_CUR_1P0A 0x90 +#define MAIN_CH_IP_CUR_1P1A 0xA0 +#define MAIN_CH_IP_CUR_1P2A 0xB0 +#define MAIN_CH_IP_CUR_1P3A 0xC0 +#define MAIN_CH_IP_CUR_1P4A 0xD0 +#define MAIN_CH_IP_CUR_1P5A 0xE0 + +/* ChVoltLevel */ +#define CH_VOL_LVL_3P5 0x00 +#define CH_VOL_LVL_4P0 0x14 +#define CH_VOL_LVL_4P05 0x16 +#define CH_VOL_LVL_4P1 0x1B +#define CH_VOL_LVL_4P15 0x20 +#define CH_VOL_LVL_4P2 0x25 +#define CH_VOL_LVL_4P6 0x4D + +/* ChOutputCurrentLevel */ +#define CH_OP_CUR_LVL_0P1 0x00 +#define CH_OP_CUR_LVL_0P2 0x01 +#define CH_OP_CUR_LVL_0P3 0x02 +#define CH_OP_CUR_LVL_0P4 0x03 +#define CH_OP_CUR_LVL_0P5 0x04 +#define CH_OP_CUR_LVL_0P6 0x05 +#define CH_OP_CUR_LVL_0P7 0x06 +#define CH_OP_CUR_LVL_0P8 0x07 +#define CH_OP_CUR_LVL_0P9 0x08 +#define CH_OP_CUR_LVL_1P4 0x0D +#define CH_OP_CUR_LVL_1P5 0x0E +#define CH_OP_CUR_LVL_1P6 0x0F + +/* BTEMP High thermal limits */ +#define BTEMP_HIGH_TH_57_0 0x00 +#define BTEMP_HIGH_TH_52 0x01 +#define BTEMP_HIGH_TH_57_1 0x02 +#define BTEMP_HIGH_TH_62 0x03 + +/* current is mA */ +#define USB_0P1A 100 +#define USB_0P2A 200 +#define USB_0P3A 300 +#define USB_0P4A 400 +#define USB_0P5A 500 + +#define LOW_BAT_3P1V 0x20 +#define LOW_BAT_2P3V 0x00 +#define LOW_BAT_RESET 0x01 +#define LOW_BAT_ENABLE 0x01 + +/* Backup battery constants */ +#define BUP_ICH_SEL_50UA 0x00 +#define BUP_ICH_SEL_150UA 0x04 +#define BUP_ICH_SEL_300UA 0x08 +#define BUP_ICH_SEL_700UA 0x0C + +#define BUP_VCH_SEL_2P5V 0x00 +#define BUP_VCH_SEL_2P6V 0x01 +#define BUP_VCH_SEL_2P8V 0x02 +#define BUP_VCH_SEL_3P1V 0x03 + +/* Battery OVV constants */ +#define BATT_OVV_ENA 0x02 +#define BATT_OVV_TH_3P7 0x00 +#define BATT_OVV_TH_4P75 0x01 + +/* A value to indicate over voltage */ +#define BATT_OVV_VALUE 4750 + +/* VBUS OVV constants */ +#define VBUS_OVV_SELECT_MASK 0x78 +#define VBUS_OVV_SELECT_5P6V 0x00 +#define VBUS_OVV_SELECT_5P7V 0x08 +#define VBUS_OVV_SELECT_5P8V 0x10 +#define VBUS_OVV_SELECT_5P9V 0x18 +#define VBUS_OVV_SELECT_6P0V 0x20 +#define VBUS_OVV_SELECT_6P1V 0x28 +#define VBUS_OVV_SELECT_6P2V 0x30 +#define VBUS_OVV_SELECT_6P3V 0x38 + +#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04 + +/* Fuel Gauge constants */ +#define RESET_ACCU 0x02 +#define READ_REQ 0x01 +#define CC_DEEP_SLEEP_ENA 0x02 +#define CC_PWR_UP_ENA 0x01 +#define CC_SAMPLES_40 0x28 +#define RD_NCONV_ACCU_REQ 0x01 +#define CC_CALIB 0x08 +#define CC_INTAVGOFFSET_ENA 0x10 +#define CC_MUXOFFSET 0x80 +#define CC_INT_CAL_N_AVG_MASK 0x60 +#define CC_INT_CAL_SAMPLES_16 0x40 +#define CC_INT_CAL_SAMPLES_8 0x20 +#define CC_INT_CAL_SAMPLES_4 0x00 + +/* RTC constants */ +#define RTC_BUP_CH_ENA 0x10 + +/* BatCtrl Current Source Constants */ +#define BAT_CTRL_7U_ENA 0x01 +#define BAT_CTRL_20U_ENA 0x02 +#define BAT_CTRL_CMP_ENA 0x04 +#define FORCE_BAT_CTRL_CMP_HIGH 0x08 +#define BAT_CTRL_PULL_UP_ENA 0x10 + +/* Battery type */ +#define BATTERY_UNKNOWN 00 + +/* + * ADC for the battery thermistor. + * When using the ADC_THERM_BATCTRL the battery ID resistor is combined with + * a NTC resistor to both identify the battery and to measure its temperature. + * Different phone manufactures uses different techniques to both identify the + * battery and to read its temperature. + */ +enum adc_therm { + ADC_THERM_BATCTRL, + ADC_THERM_BATTEMP, +}; + +/** + * struct res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct res_to_temp { + int temp; + int resist; +}; + +/** + * struct batres_vs_temp - defines one point in a temp vs battery internal + * resistance curve. + * @temp: battery pack temperature in Celcius + * @resist: battery internal reistance in mOhm + */ +struct batres_vs_temp { + int temp; + int resist; +}; + +/** + * struct v_to_cap - Table for translating voltage to capacity + * @voltage: Voltage in mV + * @capacity: Capacity in percent + */ +struct v_to_cap { + int voltage; + int capacity; +}; + +/* Forward declaration */ +struct ab8500_fg; + +/** + * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + */ +struct ab8500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; +}; + +/** + * struct ab8500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct ab8500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct battery_type - different batteries supported + * @name: battery technology + * @resis_high: battery upper resistance limit + * @resis_low: battery lower resistance limit + * @charge_full_design: Maximum battery capacity in mAh + * @nominal_voltage: Nominal voltage of the battery in mV + * @termination_vol: max voltage upto which battery can be charged + * @termination_curr battery charging termination current in mA + * @recharge_vol battery voltage limit that will trigger a new + * full charging cycle in the case where maintenan- + * -ce charging has been disabled + * @normal_cur_lvl: charger current in normal state in mA + * @normal_vol_lvl: charger voltage in normal state in mV + * @maint_a_cur_lvl: charger current in maintenance A state in mA + * @maint_a_vol_lvl: charger voltage in maintenance A state in mV + * @maint_a_chg_timer_h: charge time in maintenance A state + * @maint_b_cur_lvl: charger current in maintenance B state in mA + * @maint_b_vol_lvl: charger voltage in maintenance B state in mV + * @maint_b_chg_timer_h: charge time in maintenance B state + * @low_high_cur_lvl: charger current in temp low/high state in mA + * @low_high_vol_lvl: charger voltage in temp low/high state in mV' + * @battery_resistance: battery inner resistance in mOhm. + * @n_r_t_tbl_elements: number of elements in r_to_t_tbl + * @r_to_t_tbl: table containing resistance to temp points + * @n_v_cap_tbl_elements: number of elements in v_to_cap_tbl + * @v_to_cap_tbl: Voltage to capacity (in %) table + * @n_batres_tbl_elements number of elements in the batres_tbl + * @batres_tbl battery internal resistance vs temperature table + */ +struct battery_type { + int name; + int resis_high; + int resis_low; + int charge_full_design; + int nominal_voltage; + int termination_vol; + int termination_curr; + int recharge_vol; + int normal_cur_lvl; + int normal_vol_lvl; + int maint_a_cur_lvl; + int maint_a_vol_lvl; + int maint_a_chg_timer_h; + int maint_b_cur_lvl; + int maint_b_vol_lvl; + int maint_b_chg_timer_h; + int low_high_cur_lvl; + int low_high_vol_lvl; + int battery_resistance; + int n_temp_tbl_elements; + struct res_to_temp *r_to_t_tbl; + int n_v_cap_tbl_elements; + struct v_to_cap *v_to_cap_tbl; + int n_batres_tbl_elements; + struct batres_vs_temp *batres_tbl; +}; + +/** + * struct ab8500_bm_capacity_levels - ab8500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct ab8500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct ab8500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct ab8500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct ab8500_bm_data - ab8500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct ab8500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool chg_unknown_bat; + bool enable_overshoot; + enum adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct ab8500_maxim_parameters *maxi; + const struct ab8500_bm_capacity_levels *cap_levels; + const struct battery_type *bat_type; + const struct ab8500_bm_charger_parameters *chg_params; + const struct ab8500_fg_parameters *fg_params; +}; + +struct ab8500_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + bool autopower_cfg; +}; + +struct ab8500_btemp_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct ab8500_fg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct ab8500_chargalg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; +struct ab8500_btemp; +struct ab8500_gpadc; +struct ab8500_fg; +#ifdef CONFIG_AB8500_BM +void ab8500_fg_reinit(void); +void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); +struct ab8500_btemp *ab8500_btemp_get(void); +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp); +struct ab8500_fg *ab8500_fg_get(void); +int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); +int ab8500_fg_inst_curr_start(struct ab8500_fg *di); +int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); +int ab8500_fg_inst_curr_done(struct ab8500_fg *di); + +#else +int ab8500_fg_inst_curr_done(struct ab8500_fg *di) +{ +} +static void ab8500_fg_reinit(void) +{ +} +static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA) +{ +} +static struct ab8500_btemp *ab8500_btemp_get(void) +{ + return NULL; +} +static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) +{ + return 0; +} +struct ab8500_fg *ab8500_fg_get(void) +{ + return NULL; +} +static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev) +{ + return -ENODEV; +} + +static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di) +{ + return -ENODEV; +} + +static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) +{ + return -ENODEV; +} + +#endif +#endif /* _AB8500_BM_H */ -- cgit v1.2.3-70-g09d2 From d329129e9e10e3089550fd9bd692f67687503136 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 14 Mar 2012 04:27:20 +0400 Subject: ab8500_btemp: Get rid of 'enum adc_therm' This is the same as abx500_adc_therm, but when the former is used, the following warning flood pops up: drivers/power/ab8500_btemp.c: In function 'ab8500_btemp_batctrl_volt_to_res': ab8500_btemp.c:150:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_curr_source_enable': ab8500_btemp.c:212:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c:244:32: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_measure_temp': ab8500_btemp.c:462:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_id': ab8500_btemp.c:528:121: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c:551:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] This patch fixes the issue by switching the driver to use more namespace-friendly enum. Signed-off-by: Anton Vorontsov --- drivers/power/ab8500_btemp.c | 13 +++++++------ include/linux/mfd/abx500/ab8500-bm.h | 15 ++------------- 2 files changed, 9 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 443bc7db30a..d8bb99394ac 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -147,7 +147,7 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, return (450000 * (v_batctrl)) / (1800 - v_batctrl); } - if (di->bat->adc_therm == ADC_THERM_BATCTRL) { + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL) { /* * If the battery has internal NTC, we use the current * source to calculate the resistance, 7uA or 20uA @@ -209,7 +209,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, return 0; /* Only do this for batteries with internal NTC */ - if (di->bat->adc_therm == ADC_THERM_BATCTRL && enable) { + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) curr = BAT_CTRL_7U_ENA; else @@ -241,7 +241,7 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, __func__); goto disable_curr_source; } - } else if (di->bat->adc_therm == ADC_THERM_BATCTRL && !enable) { + } else if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { dev_dbg(di->dev, "Disable BATCTRL curr source\n"); /* Write 0 to the curr bits */ @@ -459,7 +459,7 @@ static int ab8500_btemp_measure_temp(struct ab8500_btemp *di) id = di->bat->batt_id; - if (di->bat->adc_therm == ADC_THERM_BATCTRL && + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && id != BATTERY_UNKNOWN) { rbat = ab8500_btemp_get_batctrl_res(di); @@ -528,7 +528,7 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) dev_dbg(di->dev, "Battery detected on %s" " low %d < res %d < high: %d" " index: %d\n", - di->bat->adc_therm == ADC_THERM_BATCTRL ? + di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL ? "BATCTRL" : "BATTEMP", di->bat->bat_type[i].resis_low, res, di->bat->bat_type[i].resis_high, i); @@ -548,7 +548,8 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) * We only have to change current source if the * detected type is Type 1, else we use the 7uA source */ - if (di->bat->adc_therm == ADC_THERM_BATCTRL && di->bat->batt_id == 1) { + if (di->bat->adc_therm == ABx500_ADC_THERM_BATCTRL && + di->bat->batt_id == 1) { dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; } diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 4b7342c54b4..f61b7b981ce 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -9,6 +9,7 @@ #define _AB8500_BM_H #include +#include /* * System control 2 register offsets. @@ -231,18 +232,6 @@ /* Battery type */ #define BATTERY_UNKNOWN 00 -/* - * ADC for the battery thermistor. - * When using the ADC_THERM_BATCTRL the battery ID resistor is combined with - * a NTC resistor to both identify the battery and to measure its temperature. - * Different phone manufactures uses different techniques to both identify the - * battery and to read its temperature. - */ -enum adc_therm { - ADC_THERM_BATCTRL, - ADC_THERM_BATTEMP, -}; - /** * struct res_to_temp - defines one point in a temp to res curve. To * be used in battery packs that combines the identification resistor with a @@ -464,7 +453,7 @@ struct ab8500_bm_data { bool no_maintenance; bool chg_unknown_bat; bool enable_overshoot; - enum adc_therm adc_therm; + enum abx500_adc_therm adc_therm; int fg_res; int n_btypes; int batt_id; -- cgit v1.2.3-70-g09d2 From 450ceb2b23ed0feba8c1238f52a1d3feacd5379d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 14 Mar 2012 04:38:32 +0400 Subject: ab8500_fg: Get rid of 'struct v_to_cap' The struct is duplicated, plus when used it causes the following warnings: CHECK drivers/power/ab8500_fg.c ab8500_fg.c:818:13: warning: incorrect type in assignment (different base types) ab8500_fg.c:818:13: expected struct v_to_cap *tbl ab8500_fg.c:818:13: got struct abx500_v_to_cap *const v_to_cap_tbl CC drivers/power/ab8500_fg.o ab8500_fg.c: In function 'ab8500_fg_volt_to_capacity': ab8500_fg.c:818:6: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anton Vorontsov --- drivers/power/ab8500_fg.c | 2 +- include/linux/mfd/abx500/ab8500-bm.h | 10 ---------- 2 files changed, 1 insertion(+), 11 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 41ccb70d401..180c21ad680 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -812,7 +812,7 @@ static int ab8500_fg_bat_voltage(struct ab8500_fg *di) static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage) { int i, tbl_size; - struct v_to_cap *tbl; + struct abx500_v_to_cap *tbl; int cap = 0; tbl = di->bat->bat_type[di->bat->batt_id].v_to_cap_tbl, diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index f61b7b981ce..44d86206a25 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -255,16 +255,6 @@ struct batres_vs_temp { int resist; }; -/** - * struct v_to_cap - Table for translating voltage to capacity - * @voltage: Voltage in mV - * @capacity: Capacity in percent - */ -struct v_to_cap { - int voltage; - int capacity; -}; - /* Forward declaration */ struct ab8500_fg; -- cgit v1.2.3-70-g09d2 From c34a61b4e7a9966edc0e87d7b0a12fbb8cc58168 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 14 Mar 2012 04:39:01 +0400 Subject: ab8500_fg: Get rid of 'struct battery_type' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The struct is duplicated, plus causes the following flood: CC drivers/power/ab8500_fg.o ab8500_fg.c: In function ‘ab8500_fg_get_ext_psy_data’: b8500_fg.c:2081:8: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anton Vorontsov --- drivers/power/ab8500_fg.c | 3 +- include/linux/mfd/abx500/ab8500-bm.h | 59 ------------------------------------ 2 files changed, 2 insertions(+), 60 deletions(-) (limited to 'include/linux') diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 180c21ad680..b7e12c8af8c 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -2077,7 +2077,8 @@ static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data) switch (ext->type) { case POWER_SUPPLY_TYPE_BATTERY: if (!di->flags.batt_id_received) { - const struct battery_type *b; + const struct abx500_battery_type *b; + b = &(di->bat->bat_type[di->bat->batt_id]); di->flags.batt_id_received = true; diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 44d86206a25..44310c98ee6 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -312,64 +312,6 @@ struct ab8500_maxim_parameters { int charger_curr_step; }; -/** - * struct battery_type - different batteries supported - * @name: battery technology - * @resis_high: battery upper resistance limit - * @resis_low: battery lower resistance limit - * @charge_full_design: Maximum battery capacity in mAh - * @nominal_voltage: Nominal voltage of the battery in mV - * @termination_vol: max voltage upto which battery can be charged - * @termination_curr battery charging termination current in mA - * @recharge_vol battery voltage limit that will trigger a new - * full charging cycle in the case where maintenan- - * -ce charging has been disabled - * @normal_cur_lvl: charger current in normal state in mA - * @normal_vol_lvl: charger voltage in normal state in mV - * @maint_a_cur_lvl: charger current in maintenance A state in mA - * @maint_a_vol_lvl: charger voltage in maintenance A state in mV - * @maint_a_chg_timer_h: charge time in maintenance A state - * @maint_b_cur_lvl: charger current in maintenance B state in mA - * @maint_b_vol_lvl: charger voltage in maintenance B state in mV - * @maint_b_chg_timer_h: charge time in maintenance B state - * @low_high_cur_lvl: charger current in temp low/high state in mA - * @low_high_vol_lvl: charger voltage in temp low/high state in mV' - * @battery_resistance: battery inner resistance in mOhm. - * @n_r_t_tbl_elements: number of elements in r_to_t_tbl - * @r_to_t_tbl: table containing resistance to temp points - * @n_v_cap_tbl_elements: number of elements in v_to_cap_tbl - * @v_to_cap_tbl: Voltage to capacity (in %) table - * @n_batres_tbl_elements number of elements in the batres_tbl - * @batres_tbl battery internal resistance vs temperature table - */ -struct battery_type { - int name; - int resis_high; - int resis_low; - int charge_full_design; - int nominal_voltage; - int termination_vol; - int termination_curr; - int recharge_vol; - int normal_cur_lvl; - int normal_vol_lvl; - int maint_a_cur_lvl; - int maint_a_vol_lvl; - int maint_a_chg_timer_h; - int maint_b_cur_lvl; - int maint_b_vol_lvl; - int maint_b_chg_timer_h; - int low_high_cur_lvl; - int low_high_vol_lvl; - int battery_resistance; - int n_temp_tbl_elements; - struct res_to_temp *r_to_t_tbl; - int n_v_cap_tbl_elements; - struct v_to_cap *v_to_cap_tbl; - int n_batres_tbl_elements; - struct batres_vs_temp *batres_tbl; -}; - /** * struct ab8500_bm_capacity_levels - ab8500 capacity level data * @critical: critical capacity level in percent @@ -453,7 +395,6 @@ struct ab8500_bm_data { int gnd_lift_resistance; const struct ab8500_maxim_parameters *maxi; const struct ab8500_bm_capacity_levels *cap_levels; - const struct battery_type *bat_type; const struct ab8500_bm_charger_parameters *chg_params; const struct ab8500_fg_parameters *fg_params; }; -- cgit v1.2.3-70-g09d2 From 5276e16bb6f35412583518d6f04651dd9dc114be Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sat, 14 Jan 2012 17:38:55 +0100 Subject: netfilter: ipset: avoid use of kernel-only types When using the xt_set.h header in userspace, one will get these gcc reports: ipset/ip_set.h:184:1: error: unknown type name "u16" In file included from libxt_SET.c:21:0: netfilter/xt_set.h:61:2: error: unknown type name "u32" netfilter/xt_set.h:62:2: error: unknown type name "u32" Signed-off-by: Jan Engelhardt Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/xt_set.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_set.h b/include/linux/netfilter/xt_set.h index c0405ac9287..e3a9978f259 100644 --- a/include/linux/netfilter/xt_set.h +++ b/include/linux/netfilter/xt_set.h @@ -58,8 +58,8 @@ struct xt_set_info_target_v1 { struct xt_set_info_target_v2 { struct xt_set_info add_set; struct xt_set_info del_set; - u32 flags; - u32 timeout; + __u32 flags; + __u32 timeout; }; #endif /*_XT_SET_H*/ -- cgit v1.2.3-70-g09d2 From 5694f8a888f8f69a562e4cf939eed81ca7a5ecf2 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 26 Mar 2012 21:47:19 +0200 Subject: i2c: Update the FSF address Signed-off-by: Jean Delvare --- drivers/i2c/algos/i2c-algo-bit.c | 3 ++- drivers/i2c/algos/i2c-algo-pca.c | 3 ++- drivers/i2c/algos/i2c-algo-pcf.c | 3 ++- drivers/i2c/algos/i2c-algo-pcf.h | 3 ++- drivers/i2c/i2c-boardinfo.c | 3 ++- drivers/i2c/i2c-core.c | 3 ++- drivers/i2c/i2c-core.h | 3 ++- drivers/i2c/i2c-dev.c | 3 ++- drivers/i2c/i2c-smbus.c | 3 ++- include/linux/i2c-algo-bit.h | 3 ++- include/linux/i2c-algo-pcf.h | 3 ++- include/linux/i2c-dev.h | 3 ++- include/linux/i2c-mux.h | 3 ++- include/linux/i2c-smbus.h | 3 ++- include/linux/i2c.h | 3 ++- 15 files changed, 30 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index acba1c686c6..69902c8e3b1 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. * ------------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard , Kyösti Mälkki diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index beb9ffe2564..73133b1063f 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 5eebf562ff3..5c2379522aa 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -16,7 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. * * With some changes from Kyösti Mälkki and * Frodo Looijaard , and also from Martin Bailey diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h index 5263a9eeb8d..1ec703ee788 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.h +++ b/drivers/i2c/algos/i2c-algo-pcf.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* -------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard */ diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 10274ffb66d..f24cc64e2e8 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -13,7 +13,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e9c18939eda..feb7dc35918 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -14,7 +14,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki . diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 9f9c57ff670..18a8fd21d2c 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -13,7 +13,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 10e7f1e7658..45048323b75 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -17,7 +17,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* Note that this is a complete rewrite of Simon Vogl's i2c-dev module. diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index f61ccc1e5ea..9836d08f7a7 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -16,7 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index 584ffa0f328..63904ba6887 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki and even diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 0f91a957a69..538e8f41a31 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki and even diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index fd53bfd2647..8a7406b2114 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ #ifndef _LINUX_I2C_DEV_H diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h index 34536effd65..747f0cde416 100644 --- a/include/linux/i2c-mux.h +++ b/include/linux/i2c-mux.h @@ -18,7 +18,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #ifndef _LINUX_I2C_MUX_H diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h index 63f57a8c8b3..017fb40f702 100644 --- a/include/linux/i2c-smbus.h +++ b/include/linux/i2c-smbus.h @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #ifndef _LINUX_I2C_SMBUS_H diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 8e25a9167f1..195d8b3d9cf 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -17,7 +17,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki and -- cgit v1.2.3-70-g09d2 From 70d5098a4b1551864dd7df43f67b7f606a1a6438 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 10 Jan 2012 13:26:58 +0100 Subject: mtd: mtdblock: call mtd_sync() only if opened for write Because it is useless to call it if the device is opened in R/O mode, and also harmful: on CFI NOR flash it may block for long time waiting for erase operations to complete is another partition with a R/W file-system on this chip. Artem Bityutskiy: write commit message, amend the patch to match the latest tree (we use mtd_sync(), not mtd->sync() nowadays). Signed-off-by: Alexander Stein Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtd_blkdevs.c | 1 + drivers/mtd/mtdblock.c | 8 ++++++-- include/linux/mtd/blktrans.h | 1 + 3 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 424ca5f93c6..f1f06715d4e 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -233,6 +233,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode) ret = __get_mtd_device(dev->mtd); if (ret) goto error_release; + dev->file_mode = mode; unlock: dev->open++; diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index af6591237b9..6c6d80736fa 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -321,8 +321,12 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd) mutex_unlock(&mtdblk->cache_mutex); if (!--mtdblk->count) { - /* It was the last usage. Free the cache */ - mtd_sync(mbd->mtd); + /* + * It was the last usage. Free the cache, but only sync if + * opened for writing. + */ + if (mbd->file_mode & FMODE_WRITE) + mtd_sync(mbd->mtd); vfree(mtdblk->cache_data); } diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 1bbd9f28924..ed270bd2e4d 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -47,6 +47,7 @@ struct mtd_blktrans_dev { struct request_queue *rq; spinlock_t queue_lock; void *priv; + fmode_t file_mode; }; struct mtd_blktrans_ops { -- cgit v1.2.3-70-g09d2 From 661a08327d11bcc4cf649c5ae4bdf2db0a87b320 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 13 Jan 2012 18:11:50 -0800 Subject: mtd: nand: correct comment on nand_chip badblockbits The description for badblockbits is incorrect. I think someone just made up a false description on the spot to satisfy some kerneldoc warning. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 63b5a8b6dfb..609868f3db4 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -448,8 +448,9 @@ struct nand_buffers { * will be copied to the appropriate nand_bbt_descr's. * @badblockpos: [INTERN] position of the bad block marker in the oob * area. - * @badblockbits: [INTERN] number of bits to left-shift the bad block - * number + * @badblockbits: [INTERN] minimum number of set bits in a good block's + * bad block marker position; i.e., BBM == 11110111b is + * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays -- cgit v1.2.3-70-g09d2 From f18dbbb1bfe06ea3995b55c2f533057da9e9294a Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Thu, 12 Jan 2012 14:38:57 +0100 Subject: mtd: ST SPEAr: Add SMI driver for serial NOR flash SPEAr platforms (spear3xx/spear6xx/spear13xx) provide SMI (Serial Memory Interface) controller to access serial NOR flash. SMI provides a simple interface for SPI/serial NOR flashes and has certain inbuilt commands and features to support these flashes easily. It also makes it possible to map an address range in order to directly access (read/write) the SNOR over address bus. This patch intends to provide serial nor driver support for spear platforms which are accessed through SMI. Signed-off-by: Shiraz Hashim Signed-off-by: Viresh Kumar Signed-off-by: Stefan Roese Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/Kconfig | 7 + drivers/mtd/devices/Makefile | 1 + drivers/mtd/devices/spear_smi.c | 1112 +++++++++++++++++++++++++++++++++++++++ include/linux/mtd/spear_smi.h | 60 +++ 4 files changed, 1180 insertions(+) create mode 100644 drivers/mtd/devices/spear_smi.c create mode 100644 include/linux/mtd/spear_smi.h (limited to 'include/linux') diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 37b05c3f279..98206b034c0 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -102,6 +102,13 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SPEAR_SMI + tristate "SPEAR MTD NOR Support through SMI controller" + depends on PLAT_SPEAR + default y + help + This enable SNOR support on SPEAR platforms using SMI controller + config MTD_SST25L tristate "Support SST25L (non JEDEC) SPI Flash chips" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 56c7cd462f1..a4dd1d822b6 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o CFLAGS_docg3.o += -I$(src) \ No newline at end of file diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c new file mode 100644 index 00000000000..1eac56cf8ed --- /dev/null +++ b/drivers/mtd/devices/spear_smi.c @@ -0,0 +1,1112 @@ +/* + * SMI (Serial Memory Controller) device driver for Serial NOR Flash on + * SPEAr platform + * The serial nor interface is largely based on drivers/mtd/m25p80.c, + * however the SPI interface has been replaced by SMI. + * + * Copyright © 2010 STMicroelectronics. + * Ashish Priyadarshi + * Shiraz Hashim + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* max possible slots for serial-nor flash chip in the SMI controller */ +#define MAX_NUM_FLASH_CHIP 4 + +/* SMI clock rate */ +#define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */ + +/* MAX time out to safely come out of a erase or write busy conditions */ +#define SMI_PROBE_TIMEOUT (HZ / 10) +#define SMI_MAX_TIME_OUT (3 * HZ) + +/* timeout for command completion */ +#define SMI_CMD_TIMEOUT (HZ / 10) + +/* registers of smi */ +#define SMI_CR1 0x0 /* SMI control register 1 */ +#define SMI_CR2 0x4 /* SMI control register 2 */ +#define SMI_SR 0x8 /* SMI status register */ +#define SMI_TR 0xC /* SMI transmit register */ +#define SMI_RR 0x10 /* SMI receive register */ + +/* defines for control_reg 1 */ +#define BANK_EN (0xF << 0) /* enables all banks */ +#define DSEL_TIME (0x6 << 4) /* Deselect time 6 + 1 SMI_CK periods */ +#define SW_MODE (0x1 << 28) /* enables SW Mode */ +#define WB_MODE (0x1 << 29) /* Write Burst Mode */ +#define FAST_MODE (0x1 << 15) /* Fast Mode */ +#define HOLD1 (0x1 << 16) /* Clock Hold period selection */ + +/* defines for control_reg 2 */ +#define SEND (0x1 << 7) /* Send data */ +#define TFIE (0x1 << 8) /* Transmission Flag Interrupt Enable */ +#define WCIE (0x1 << 9) /* Write Complete Interrupt Enable */ +#define RD_STATUS_REG (0x1 << 10) /* reads status reg */ +#define WE (0x1 << 11) /* Write Enable */ + +#define TX_LEN_SHIFT 0 +#define RX_LEN_SHIFT 4 +#define BANK_SHIFT 12 + +/* defines for status register */ +#define SR_WIP 0x1 /* Write in progress */ +#define SR_WEL 0x2 /* Write enable latch */ +#define SR_BP0 0x4 /* Block protect 0 */ +#define SR_BP1 0x8 /* Block protect 1 */ +#define SR_BP2 0x10 /* Block protect 2 */ +#define SR_SRWD 0x80 /* SR write protect */ +#define TFF 0x100 /* Transfer Finished Flag */ +#define WCF 0x200 /* Transfer Finished Flag */ +#define ERF1 0x400 /* Forbidden Write Request */ +#define ERF2 0x800 /* Forbidden Access */ + +#define WM_SHIFT 12 + +/* flash opcodes */ +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ + +/* Flash Device Ids maintenance section */ + +/* data structure to maintain flash ids from different vendors */ +struct flash_device { + char *name; + u8 erase_cmd; + u32 device_id; + u32 pagesize; + unsigned long sectorsize; + unsigned long size_in_bytes; +}; + +#define FLASH_ID(n, es, id, psize, ssize, size) \ +{ \ + .name = n, \ + .erase_cmd = es, \ + .device_id = id, \ + .pagesize = psize, \ + .sectorsize = ssize, \ + .size_in_bytes = size \ +} + +static struct flash_device flash_devices[] = { + FLASH_ID("st m25p16" , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), + FLASH_ID("st m25p32" , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), + FLASH_ID("st m25p64" , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), + FLASH_ID("st m25p128" , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), + FLASH_ID("st m25p05" , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000), + FLASH_ID("st m25p10" , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000), + FLASH_ID("st m25p20" , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m25p40" , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m25p80" , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), + FLASH_ID("st m45pe10" , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), + FLASH_ID("st m45pe20" , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m45pe40" , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m45pe80" , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl004" , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), + FLASH_ID("sp s25fl008" , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl016" , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), + FLASH_ID("sp s25fl032" , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), + FLASH_ID("sp s25fl064" , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), + FLASH_ID("atmel 25f512" , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000), + FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000), + FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000), + FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000), + FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000), + FLASH_ID("mac 25l512" , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000), + FLASH_ID("mac 25l1005" , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000), + FLASH_ID("mac 25l2005" , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000), + FLASH_ID("mac 25l4005" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l4005a" , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l8005" , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000), + FLASH_ID("mac 25l1605" , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000), + FLASH_ID("mac 25l1605a" , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000), + FLASH_ID("mac 25l3205" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l3205a" , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l6405" , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000), +}; + +/* These partitions would be used if platform doesn't pass one */ +static struct mtd_partition part_info_8M[] = { + DEFINE_PARTS("Xloader", 0x00, 0x10000), + DEFINE_PARTS("UBoot", MTDPART_OFS_APPEND, 0x40000), + DEFINE_PARTS("Kernel", MTDPART_OFS_APPEND, 0x2C0000), + DEFINE_PARTS("Root File System", MTDPART_OFS_APPEND, MTDPART_SIZ_FULL), +}; + +static struct mtd_partition part_info_16M[] = { + DEFINE_PARTS("Xloader", 0x00, 0x40000), + DEFINE_PARTS("UBoot", MTDPART_OFS_APPEND, 0x100000), + DEFINE_PARTS("Kernel", MTDPART_OFS_APPEND, 0x300000), + DEFINE_PARTS("Root File System", MTDPART_OFS_APPEND, MTDPART_SIZ_FULL), +}; + +/* Define spear specific structures */ + +struct spear_snor_flash; + +/** + * struct spear_smi - Structure for SMI Device + * + * @clk: functional clock + * @status: current status register of SMI. + * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ) + * @lock: lock to prevent parallel access of SMI. + * @io_base: base address for registers of SMI. + * @pdev: platform device + * @cmd_complete: queue to wait for command completion of NOR-flash. + * @num_flashes: number of flashes actually present on board. + * @flash: separate structure for each Serial NOR-flash attached to SMI. + */ +struct spear_smi { + struct clk *clk; + u32 status; + unsigned long clk_rate; + struct mutex lock; + void __iomem *io_base; + struct platform_device *pdev; + wait_queue_head_t cmd_complete; + u32 num_flashes; + struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP]; +}; + +/** + * struct spear_snor_flash - Structure for Serial NOR Flash + * + * @bank: Bank number(0, 1, 2, 3) for each NOR-flash. + * @dev_id: Device ID of NOR-flash. + * @lock: lock to manage flash read, write and erase operations + * @mtd: MTD info for each NOR-flash. + * @num_parts: Total number of partition in each bank of NOR-flash. + * @parts: Partition info for each bank of NOR-flash. + * @page_size: Page size of NOR-flash. + * @base_addr: Base address of NOR-flash. + * @erase_cmd: erase command may vary on different flash types + * @fast_mode: flash supports read in fast mode + */ +struct spear_snor_flash { + u32 bank; + u32 dev_id; + struct mutex lock; + struct mtd_info mtd; + u32 num_parts; + struct mtd_partition *parts; + u32 page_size; + void __iomem *base_addr; + u8 erase_cmd; + u8 fast_mode; +}; + +static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd) +{ + return container_of(mtd, struct spear_snor_flash, mtd); +} + +/** + * spear_smi_read_sr - Read status register of flash through SMI + * @dev: structure of SMI information. + * @bank: bank to which flash is connected + * + * This routine will return the status register of the flash chip present at the + * given bank. + */ +static int spear_smi_read_sr(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in hw mode */ + writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1); + + /* performing a rsr instruction in hw mode */ + writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE, + dev->io_base + SMI_CR2); + + /* wait for tff */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* copy dev->status (lower 16 bits) in order to release lock */ + if (ret > 0) + ret = dev->status & 0xffff; + else + ret = -EIO; + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + mutex_unlock(&dev->lock); + + return ret; +} + +/** + * spear_smi_wait_till_ready - wait till flash is ready + * @dev: structure of SMI information. + * @bank: flash corresponding to this bank + * @timeout: timeout for busy wait condition + * + * This routine checks for WIP (write in progress) bit in Status register + * If successful the routine returns 0 else -EBUSY + */ +static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank, + unsigned long timeout) +{ + unsigned long finish; + int status; + + finish = jiffies + timeout; + do { + status = spear_smi_read_sr(dev, bank); + if (status < 0) + continue; /* try till timeout */ + else if (!(status & SR_WIP)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, finish)); + + dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n"); + return status; +} + +/** + * spear_smi_int_handler - SMI Interrupt Handler. + * @irq: irq number + * @dev_id: structure of SMI device, embedded in dev_id. + * + * The handler clears all interrupt conditions and records the status in + * dev->status which is used by the driver later. + */ +static irqreturn_t spear_smi_int_handler(int irq, void *dev_id) +{ + u32 status = 0; + struct spear_smi *dev = dev_id; + + status = readl(dev->io_base + SMI_SR); + + if (unlikely(!status)) + return IRQ_NONE; + + /* clear all interrupt conditions */ + writel(0, dev->io_base + SMI_SR); + + /* copy the status register in dev->status */ + dev->status |= status; + + /* send the completion */ + wake_up_interruptible(&dev->cmd_complete); + + return IRQ_HANDLED; +} + +/** + * spear_smi_hw_init - initializes the smi controller. + * @dev: structure of smi device + * + * this routine initializes the smi controller wit the default values + */ +static void spear_smi_hw_init(struct spear_smi *dev) +{ + unsigned long rate = 0; + u32 prescale = 0; + u32 val; + + rate = clk_get_rate(dev->clk); + + /* functional clock of smi */ + prescale = DIV_ROUND_UP(rate, dev->clk_rate); + + /* + * setting the standard values, fast mode, prescaler for + * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable + */ + val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8); + + mutex_lock(&dev->lock); + writel(val, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); +} + +/** + * get_flash_index - match chip id from a flash list. + * @flash_id: a valid nor flash chip id obtained from board. + * + * try to validate the chip id by matching from a list, if not found then simply + * returns negative. In case of success returns index in to the flash devices + * array. + */ +static int get_flash_index(u32 flash_id) +{ + int index; + + /* Matches chip-id to entire list of 'serial-nor flash' ids */ + for (index = 0; index < ARRAY_SIZE(flash_devices); index++) { + if (flash_devices[index].device_id == flash_id) + return index; + } + + /* Memory chip is not listed and not supported */ + return -ENODEV; +} + +/** + * spear_smi_write_enable - Enable the flash to do write operation + * @dev: structure of SMI device + * @bank: enable write for flash connected to this bank + * + * Set write enable latch with Write Enable command. + * Returns 0 on success. + */ +static int spear_smi_write_enable(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 ctrlreg1; + + mutex_lock(&dev->lock); + dev->status = 0; /* Will be set in interrupt handler */ + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + /* program smi in h/w mode */ + writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1); + + /* give the flash, write enable command */ + writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + /* restore the ctrl regs state */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, + "smi controller failed on write enable\n"); + } else { + /* check whether write mode status is set for required bank */ + if (dev->status & (1 << (bank + WM_SHIFT))) + ret = 0; + else { + dev_err(&dev->pdev->dev, "couldn't enable write\n"); + ret = -EIO; + } + } + + mutex_unlock(&dev->lock); + return ret; +} + +static inline u32 +get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset) +{ + u32 cmd; + u8 *x = (u8 *)&cmd; + + x[0] = flash->erase_cmd; + x[1] = offset >> 16; + x[2] = offset >> 8; + x[3] = offset; + + return cmd; +} + +/** + * spear_smi_erase_sector - erase one sector of flash + * @dev: structure of SMI information + * @command: erase command to be send + * @bank: bank to which this command needs to be send + * @bytes: size of command + * + * Erase one sector of flash memory at offset ``offset'' which is any + * address within the sector which should be erased. + * Returns 0 if successful, non-zero otherwise. + */ +static int spear_smi_erase_sector(struct spear_smi *dev, + u32 bank, u32 command, u32 bytes) +{ + u32 ctrlreg1 = 0; + int ret; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1); + + /* send command in sw mode */ + writel(command, dev->io_base + SMI_TR); + + writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT), + dev->io_base + SMI_CR2); + + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + + if (ret <= 0) { + ret = -EIO; + dev_err(&dev->pdev->dev, "sector erase failed\n"); + } else + ret = 0; /* success */ + + /* restore ctrl regs */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + writel(0, dev->io_base + SMI_CR2); + + mutex_unlock(&dev->lock); + return ret; +} + +/** + * spear_mtd_erase - perform flash erase operation as requested by user + * @mtd: Provides the memory characteristics + * @e_info: Provides the erase information + * + * Erase an address range on the flash chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + u32 addr, command, bank; + int len, ret; + + if (!flash || !dev) + return -ENODEV; + + /* do not allow erase past end of device */ + if (e_info->addr + e_info->len > flash->mtd.size) + return -EINVAL; + + bank = flash->bank; + if (bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + addr = e_info->addr; + len = e_info->len; + + mutex_lock(&flash->lock); + + /* now erase sectors in loop */ + while (len) { + command = get_sector_erase_cmd(flash, addr); + /* preparing the command for flash */ + ret = spear_smi_erase_sector(dev, bank, command, 4); + if (ret) { + e_info->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return ret; + } + addr += mtd->erasesize; + len -= mtd->erasesize; + } + + mutex_unlock(&flash->lock); + e_info->state = MTD_ERASE_DONE; + mtd_erase_callback(e_info); + + return 0; +} + +/** + * spear_mtd_read - performs flash read operation as requested by the user + * @mtd: MTD information of the memory bank + * @from: Address from which to start read + * @len: Number of bytes to be read + * @retlen: Fills the Number of bytes actually read + * @buf: Fills this after reading + * + * Read an address range from the flash chip. The address range + * may be any size provided it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *src; + u32 ctrlreg1, val; + int ret; + + if (!len) + return 0; + + if (!flash || !dev) + return -ENODEV; + + /* do not allow reads past end of device */ + if (from + len > flash->mtd.size) + return -EINVAL; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + if (!retlen) + return -EINVAL; + else + *retlen = 0; + + /* select address as per bank number */ + src = flash->base_addr + from; + + mutex_lock(&flash->lock); + + /* wait till previous write/erase is done. */ + ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + mutex_lock(&dev->lock); + /* put smi in hw mode not wbt mode */ + ctrlreg1 = val = readl(dev->io_base + SMI_CR1); + val &= ~(SW_MODE | WB_MODE); + if (flash->fast_mode) + val |= FAST_MODE; + + writel(val, dev->io_base + SMI_CR1); + + memcpy_fromio(buf, (u8 *)src, len); + + /* restore ctrl reg1 */ + writel(ctrlreg1, dev->io_base + SMI_CR1); + mutex_unlock(&dev->lock); + + *retlen = len; + mutex_unlock(&flash->lock); + + return 0; +} + +static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank, + void *dest, const void *src, size_t len) +{ + int ret; + u32 ctrlreg1; + + /* wait until finished previous write command. */ + ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT); + if (ret) + return ret; + + /* put smi in write enable */ + ret = spear_smi_write_enable(dev, bank); + if (ret) + return ret; + + /* put smi in hw, write burst mode */ + mutex_lock(&dev->lock); + + ctrlreg1 = readl(dev->io_base + SMI_CR1); + writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1); + + memcpy_toio(dest, src, len); + + writel(ctrlreg1, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return 0; +} + +/** + * spear_mtd_write - performs write operation as requested by the user. + * @mtd: MTD information of the memory bank. + * @to: Address to write. + * @len: Number of bytes to be written. + * @retlen: Number of bytes actually wrote. + * @buf: Buffer from which the data to be taken. + * + * Write an address range to the flash chip. Data must be written in + * flash_page_size chunks. The address range may be any size provided + * it is within the physical boundaries. + * Returns 0 on success, non zero otherwise + */ +static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u8 *buf) +{ + struct spear_snor_flash *flash = get_flash_data(mtd); + struct spear_smi *dev = mtd->priv; + void *dest; + u32 page_offset, page_size; + int ret; + + if (!flash || !dev) + return -ENODEV; + + if (!len) + return 0; + + /* do not allow write past end of page */ + if (to + len > flash->mtd.size) + return -EINVAL; + + if (flash->bank > dev->num_flashes - 1) { + dev_err(&dev->pdev->dev, "Invalid Bank Num"); + return -EINVAL; + } + + if (!retlen) + return -EINVAL; + else + *retlen = 0; + + /* select address as per bank number */ + dest = flash->base_addr + to; + mutex_lock(&flash->lock); + + page_offset = (u32)to % flash->page_size; + + /* do if all the bytes fit onto one page */ + if (page_offset + len <= flash->page_size) { + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len); + if (!ret) + *retlen += len; + } else { + u32 i; + + /* the size of data remaining on the first page */ + page_size = flash->page_size - page_offset; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, + page_size); + if (ret) + goto err_write; + else + *retlen += page_size; + + /* write everything in pagesize chunks */ + for (i = page_size; i < len; i += page_size) { + page_size = len - i; + if (page_size > flash->page_size) + page_size = flash->page_size; + + ret = spear_smi_cpy_toio(dev, flash->bank, dest + i, + buf + i, page_size); + if (ret) + break; + else + *retlen += page_size; + } + } + +err_write: + mutex_unlock(&flash->lock); + + return ret; +} + +/** + * spear_smi_probe_flash - Detects the NOR Flash chip. + * @dev: structure of SMI information. + * @bank: bank on which flash must be probed + * + * This routine will check whether there exists a flash chip on a given memory + * bank ID. + * Return index of the probed flash in flash devices structure + */ +static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank) +{ + int ret; + u32 val = 0; + + ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT); + if (ret) + return ret; + + mutex_lock(&dev->lock); + + dev->status = 0; /* Will be set in interrupt handler */ + /* put smi in sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val | SW_MODE, dev->io_base + SMI_CR1); + + /* send readid command in sw mode */ + writel(OPCODE_RDID, dev->io_base + SMI_TR); + + val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) | + (3 << RX_LEN_SHIFT) | TFIE; + writel(val, dev->io_base + SMI_CR2); + + /* wait for TFF */ + ret = wait_event_interruptible_timeout(dev->cmd_complete, + dev->status & TFF, SMI_CMD_TIMEOUT); + if (ret <= 0) { + ret = -ENODEV; + goto err_probe; + } + + /* get memory chip id */ + val = readl(dev->io_base + SMI_RR); + val &= 0x00ffffff; + ret = get_flash_index(val); + +err_probe: + /* clear sw mode */ + val = readl(dev->io_base + SMI_CR1); + writel(val & ~SW_MODE, dev->io_base + SMI_CR1); + + mutex_unlock(&dev->lock); + return ret; +} + +static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + struct spear_smi_flash_info *flash_info; + struct spear_smi_plat_data *pdata; + struct spear_snor_flash *flash; + struct mtd_partition *parts; + int count; + int flash_index; + int ret = 0; + + pdata = dev_get_platdata(&pdev->dev); + if (bank > pdata->num_flashes - 1) + return -EINVAL; + + flash_info = &pdata->board_flash_info[bank]; + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(*flash), GFP_ATOMIC); + if (!flash) + return -ENOMEM; + flash->bank = bank; + flash->fast_mode = flash_info->fast_mode ? 1 : 0; + mutex_init(&flash->lock); + + /* verify whether nor flash is really present on board */ + flash_index = spear_smi_probe_flash(dev, bank); + if (flash_index < 0) { + dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank); + ret = flash_index; + goto err_probe; + } + /* map the memory for nor flash chip */ + flash->base_addr = ioremap(flash_info->mem_base, flash_info->size); + if (!flash->base_addr) { + ret = -EIO; + goto err_probe; + } + + dev->flash[bank] = flash; + flash->mtd.priv = dev; + + if (flash_info->name) + flash->mtd.name = flash_info->name; + else + flash->mtd.name = flash_devices[flash_index].name; + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.writesize = 1; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.size = flash_info->size; + flash->mtd.erasesize = flash_devices[flash_index].sectorsize; + flash->page_size = flash_devices[flash_index].pagesize; + flash->erase_cmd = flash_devices[flash_index].erase_cmd; + flash->mtd.erase = spear_mtd_erase; + flash->mtd.read = spear_mtd_read; + flash->mtd.write = spear_mtd_write; + flash->dev_id = flash_devices[flash_index].device_id; + + dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n", + flash->mtd.name, flash->mtd.size, + flash->mtd.size / (1024 * 1024)); + + dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n", + flash->mtd.erasesize, flash->mtd.erasesize / 1024); + + if (flash_info->partitions) { + parts = flash_info->partitions; + count = flash_info->nr_partitions; + } else { + /* choose from default ones */ + switch (flash->mtd.size) { + case 0x800000:/* 8MB */ + parts = part_info_8M; + count = ARRAY_SIZE(part_info_8M); + break; + case 0x1000000:/* 16MB */ + parts = part_info_16M; + count = ARRAY_SIZE(part_info_16M); + break; + default: + dev_err(&pdev->dev, "undefined partition\n"); + ret = ENODEV; + goto err_map; + } + } + ret = mtd_device_parse_register(&flash->mtd, NULL, 0, parts, count); + if (ret) + dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); + + return ret; + +err_map: + iounmap(flash->base_addr); + +err_probe: + kfree(flash); + return ret; +} + +/** + * spear_smi_probe - Entry routine + * @pdev: platform device structure + * + * This is the first routine which gets invoked during booting and does all + * initialization/allocation work. The routine looks for available memory banks, + * and do proper init for any found one. + * Returns 0 on success, non zero otherwise + */ +static int __devinit spear_smi_probe(struct platform_device *pdev) +{ + struct spear_smi_plat_data *pdata; + struct spear_smi *dev; + struct resource *smi_base; + int irq, ret = 0; + int i; + + pdata = dev_get_platdata(&pdev->dev); + if (pdata < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!smi_base) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi base address\n"); + goto err; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "invalid smi irq\n"); + goto err; + } + + dev = kzalloc(sizeof(*dev), GFP_ATOMIC); + if (!dev) { + ret = -ENOMEM; + dev_err(&pdev->dev, "mem alloc fail\n"); + goto err; + } + + smi_base = request_mem_region(smi_base->start, resource_size(smi_base), + pdev->name); + if (!smi_base) { + ret = -EBUSY; + dev_err(&pdev->dev, "request mem region fail\n"); + goto err_mem; + } + + dev->io_base = ioremap(smi_base->start, resource_size(smi_base)); + if (!dev->io_base) { + ret = -EIO; + dev_err(&pdev->dev, "ioremap fail\n"); + goto err_ioremap; + } + + dev->pdev = pdev; + dev->clk_rate = pdata->clk_rate; + + if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ) + dev->clk_rate = SMI_MAX_CLOCK_FREQ; + + dev->num_flashes = pdata->num_flashes; + + if (dev->num_flashes > MAX_NUM_FLASH_CHIP) { + dev_err(&pdev->dev, "exceeding max number of flashes\n"); + dev->num_flashes = MAX_NUM_FLASH_CHIP; + } + + dev->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dev->clk)) { + ret = PTR_ERR(dev->clk); + goto err_clk; + } + + ret = clk_enable(dev->clk); + if (ret) + goto err_clk_enable; + + ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev); + if (ret) { + dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n"); + goto err_irq; + } + + mutex_init(&dev->lock); + init_waitqueue_head(&dev->cmd_complete); + spear_smi_hw_init(dev); + platform_set_drvdata(pdev, dev); + + /* loop for each serial nor-flash which is connected to smi */ + for (i = 0; i < dev->num_flashes; i++) { + ret = spear_smi_setup_banks(pdev, i); + if (ret) { + dev_err(&dev->pdev->dev, "bank setup failed\n"); + goto err_bank_setup; + } + } + + return 0; + +err_bank_setup: + free_irq(irq, dev); + platform_set_drvdata(pdev, NULL); +err_irq: + clk_disable(dev->clk); +err_clk_enable: + clk_put(dev->clk); +err_clk: + iounmap(dev->io_base); +err_ioremap: + release_mem_region(smi_base->start, resource_size(smi_base)); +err_mem: + kfree(dev); +err: + return ret; +} + +/** + * spear_smi_remove - Exit routine + * @pdev: platform device structure + * + * free all allocations and delete the partitions. + */ +static int __devexit spear_smi_remove(struct platform_device *pdev) +{ + struct spear_smi *dev; + struct spear_snor_flash *flash; + int ret; + int i, irq; + + dev = platform_get_drvdata(pdev); + if (!dev) { + dev_err(&pdev->dev, "dev is null\n"); + return -ENODEV; + } + + /* clean up for all nor flash */ + for (i = 0; i < dev->num_flashes; i++) { + flash = dev->flash[i]; + if (!flash) + continue; + + /* clean up mtd stuff */ + ret = mtd_device_unregister(&flash->mtd); + if (ret) + dev_err(&pdev->dev, "error removing mtd\n"); + + iounmap(flash->base_addr); + kfree(flash); + } + + irq = platform_get_irq(pdev, 0); + free_irq(irq, dev); + + clk_disable(dev->clk); + clk_put(dev->clk); + iounmap(dev->io_base); + kfree(dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +int spear_smi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + + if (dev && dev->clk) + clk_disable(dev->clk); + + return 0; +} + +int spear_smi_resume(struct platform_device *pdev) +{ + struct spear_smi *dev = platform_get_drvdata(pdev); + int ret = -EPERM; + + if (dev && dev->clk) + ret = clk_enable(dev->clk); + + if (!ret) + spear_smi_hw_init(dev); + return ret; +} + +static struct platform_driver spear_smi_driver = { + .driver = { + .name = "smi", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + }, + .probe = spear_smi_probe, + .remove = __devexit_p(spear_smi_remove), + .suspend = spear_smi_suspend, + .resume = spear_smi_resume, +}; + +static int spear_smi_init(void) +{ + return platform_driver_register(&spear_smi_driver); +} +module_init(spear_smi_init); + +static void spear_smi_exit(void) +{ + platform_driver_unregister(&spear_smi_driver); +} +module_exit(spear_smi_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim "); +MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips"); diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h new file mode 100644 index 00000000000..4e26b4e38da --- /dev/null +++ b/include/linux/mtd/spear_smi.h @@ -0,0 +1,60 @@ +/* + * Copyright © 2010 ST Microelectronics + * Shiraz Hashim + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MTD_SPEAR_SMI_H +#define __MTD_SPEAR_SMI_H + +#include +#include +#include +#include + +/* macro to define partitions for flash devices */ +#define DEFINE_PARTS(n, of, s) \ +{ \ + .name = n, \ + .offset = of, \ + .size = s, \ +} + +/** + * struct spear_smi_flash_info - platform structure for passing flash + * information + * + * name: name of the serial nor flash for identification + * mem_base: the memory base on which the flash is mapped + * size: size of the flash in bytes + * partitions: parition details + * nr_partitions: number of partitions + * fast_mode: whether flash supports fast mode + */ + +struct spear_smi_flash_info { + char *name; + unsigned long mem_base; + unsigned long size; + struct mtd_partition *partitions; + int nr_partitions; + u8 fast_mode; +}; + +/** + * struct spear_smi_plat_data - platform structure for configuring smi + * + * clk_rate: clk rate at which SMI must operate + * num_flashes: number of flashes present on board + * board_flash_info: specific details of each flash present on board + */ +struct spear_smi_plat_data { + unsigned long clk_rate; + int num_flashes; + struct spear_smi_flash_info *board_flash_info; +}; + +#endif /* __MTD_SPEAR_SMI_H */ -- cgit v1.2.3-70-g09d2 From 3c3c10bba1e4ccb75b41442e45c1a072f6cded19 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 30 Jan 2012 14:58:32 +0200 Subject: mtd: add leading underscore to all mtd functions This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 40 ++++----- drivers/mtd/chips/cfi_cmdset_0002.c | 26 +++--- drivers/mtd/chips/cfi_cmdset_0020.c | 18 ++-- drivers/mtd/chips/fwh_lock.h | 4 +- drivers/mtd/chips/map_absent.c | 8 +- drivers/mtd/chips/map_ram.c | 10 +-- drivers/mtd/chips/map_rom.c | 10 +-- drivers/mtd/devices/block2mtd.c | 10 +-- drivers/mtd/devices/doc2000.c | 10 +-- drivers/mtd/devices/doc2001.c | 10 +-- drivers/mtd/devices/doc2001plus.c | 10 +-- drivers/mtd/devices/docg3.c | 12 +-- drivers/mtd/devices/lart.c | 6 +- drivers/mtd/devices/m25p80.c | 8 +- drivers/mtd/devices/ms02-nv.c | 4 +- drivers/mtd/devices/mtd_dataflash.c | 16 ++-- drivers/mtd/devices/mtdram.c | 12 +-- drivers/mtd/devices/phram.c | 10 +-- drivers/mtd/devices/pmc551.c | 10 +-- drivers/mtd/devices/slram.c | 10 +-- drivers/mtd/devices/spear_smi.c | 6 +- drivers/mtd/devices/sst25l.c | 6 +- drivers/mtd/inftlcore.c | 2 +- drivers/mtd/lpddr/lpddr_cmds.c | 16 ++-- drivers/mtd/maps/uclinux.c | 2 +- drivers/mtd/maps/vmu-flash.c | 6 +- drivers/mtd/mtdchar.c | 4 +- drivers/mtd/mtdconcat.c | 42 ++++----- drivers/mtd/mtdcore.c | 14 +-- drivers/mtd/mtdpart.c | 91 +++++++++---------- drivers/mtd/nand/alauda.c | 8 +- drivers/mtd/nand/nand_base.c | 30 +++---- drivers/mtd/onenand/onenand_base.c | 42 ++++----- drivers/mtd/ubi/gluebi.c | 10 +-- drivers/net/ethernet/sfc/mtd.c | 8 +- include/linux/mtd/mtd.h | 168 ++++++++++++++++++------------------ 36 files changed, 350 insertions(+), 349 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index e1e122f2f92..152accf4bf8 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -262,9 +262,9 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd) static void fixup_use_point(struct mtd_info *mtd) { struct map_info *map = mtd->priv; - if (!mtd->point && map_is_linear(map)) { - mtd->point = cfi_intelext_point; - mtd->unpoint = cfi_intelext_unpoint; + if (!mtd->_point && map_is_linear(map)) { + mtd->_point = cfi_intelext_point; + mtd->_unpoint = cfi_intelext_unpoint; } } @@ -274,8 +274,8 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { printk(KERN_INFO "Using buffer write method\n" ); - mtd->write = cfi_intelext_write_buffers; - mtd->writev = cfi_intelext_writev; + mtd->_write = cfi_intelext_write_buffers; + mtd->_writev = cfi_intelext_writev; } } @@ -443,15 +443,15 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->erase = cfi_intelext_erase_varsize; - mtd->read = cfi_intelext_read; - mtd->write = cfi_intelext_write_words; - mtd->sync = cfi_intelext_sync; - mtd->lock = cfi_intelext_lock; - mtd->unlock = cfi_intelext_unlock; - mtd->is_locked = cfi_intelext_is_locked; - mtd->suspend = cfi_intelext_suspend; - mtd->resume = cfi_intelext_resume; + mtd->_erase = cfi_intelext_erase_varsize; + mtd->_read = cfi_intelext_read; + mtd->_write = cfi_intelext_write_words; + mtd->_sync = cfi_intelext_sync; + mtd->_lock = cfi_intelext_lock; + mtd->_unlock = cfi_intelext_unlock; + mtd->_is_locked = cfi_intelext_is_locked; + mtd->_suspend = cfi_intelext_suspend; + mtd->_resume = cfi_intelext_resume; mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; @@ -600,12 +600,12 @@ static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) } #ifdef CONFIG_MTD_OTP - mtd->read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; - mtd->read_user_prot_reg = cfi_intelext_read_user_prot_reg; - mtd->write_user_prot_reg = cfi_intelext_write_user_prot_reg; - mtd->lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; - mtd->get_fact_prot_info = cfi_intelext_get_fact_prot_info; - mtd->get_user_prot_info = cfi_intelext_get_user_prot_info; + mtd->_read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; + mtd->_read_user_prot_reg = cfi_intelext_read_user_prot_reg; + mtd->_write_user_prot_reg = cfi_intelext_write_user_prot_reg; + mtd->_lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; + mtd->_get_fact_prot_info = cfi_intelext_get_fact_prot_info; + mtd->_get_user_prot_info = cfi_intelext_get_user_prot_info; #endif /* This function has the potential to distort the reality diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index e2d94bb1d7c..27ac0622abe 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -192,7 +192,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if (cfi->cfiq->BufWriteTimeoutTyp) { pr_debug("Using buffer write method\n" ); - mtd->write = cfi_amdstd_write_buffers; + mtd->_write = cfi_amdstd_write_buffers; } } @@ -231,8 +231,8 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd) static void fixup_use_secsi(struct mtd_info *mtd) { /* Setup for chips with a secsi area */ - mtd->read_user_prot_reg = cfi_amdstd_secsi_read; - mtd->read_fact_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_user_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_fact_prot_reg = cfi_amdstd_secsi_read; } static void fixup_use_erase_chip(struct mtd_info *mtd) @@ -241,7 +241,7 @@ static void fixup_use_erase_chip(struct mtd_info *mtd) struct cfi_private *cfi = map->fldrv_priv; if ((cfi->cfiq->NumEraseRegions == 1) && ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) { - mtd->erase = cfi_amdstd_erase_chip; + mtd->_erase = cfi_amdstd_erase_chip; } } @@ -252,8 +252,8 @@ static void fixup_use_erase_chip(struct mtd_info *mtd) */ static void fixup_use_atmel_lock(struct mtd_info *mtd) { - mtd->lock = cfi_atmel_lock; - mtd->unlock = cfi_atmel_unlock; + mtd->_lock = cfi_atmel_lock; + mtd->_unlock = cfi_atmel_unlock; mtd->flags |= MTD_POWERUP_LOCK; } @@ -432,12 +432,12 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->erase = cfi_amdstd_erase_varsize; - mtd->write = cfi_amdstd_write_words; - mtd->read = cfi_amdstd_read; - mtd->sync = cfi_amdstd_sync; - mtd->suspend = cfi_amdstd_suspend; - mtd->resume = cfi_amdstd_resume; + mtd->_erase = cfi_amdstd_erase_varsize; + mtd->_write = cfi_amdstd_write_words; + mtd->_read = cfi_amdstd_read; + mtd->_sync = cfi_amdstd_sync; + mtd->_suspend = cfi_amdstd_suspend; + mtd->_resume = cfi_amdstd_resume; mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; @@ -446,7 +446,7 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) pr_debug("MTD %s(): write buffer size %d\n", __func__, mtd->writebufsize); - mtd->panic_write = cfi_amdstd_panic_write; + mtd->_panic_write = cfi_amdstd_panic_write; mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot; if (cfi->cfi_mode==CFI_MODE_CFI){ diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 85e80180b65..3861cca97bb 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -228,15 +228,15 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map) } /* Also select the correct geometry setup too */ - mtd->erase = cfi_staa_erase_varsize; - mtd->read = cfi_staa_read; - mtd->write = cfi_staa_write_buffers; - mtd->writev = cfi_staa_writev; - mtd->sync = cfi_staa_sync; - mtd->lock = cfi_staa_lock; - mtd->unlock = cfi_staa_unlock; - mtd->suspend = cfi_staa_suspend; - mtd->resume = cfi_staa_resume; + mtd->_erase = cfi_staa_erase_varsize; + mtd->_read = cfi_staa_read; + mtd->_write = cfi_staa_write_buffers; + mtd->_writev = cfi_staa_writev; + mtd->_sync = cfi_staa_sync; + mtd->_lock = cfi_staa_lock; + mtd->_unlock = cfi_staa_unlock; + mtd->_suspend = cfi_staa_suspend; + mtd->_resume = cfi_staa_resume; mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE; mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h index 89c6595454a..800b0e853e8 100644 --- a/drivers/mtd/chips/fwh_lock.h +++ b/drivers/mtd/chips/fwh_lock.h @@ -101,7 +101,7 @@ static void fixup_use_fwh_lock(struct mtd_info *mtd) { printk(KERN_NOTICE "using fwh lock/unlock method\n"); /* Setup for the chips with the fwh lock method */ - mtd->lock = fwh_lock_varsize; - mtd->unlock = fwh_unlock_varsize; + mtd->_lock = fwh_lock_varsize; + mtd->_unlock = fwh_unlock_varsize; } #endif /* FWH_LOCK_H */ diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c index f2b87294687..6be2eddfea4 100644 --- a/drivers/mtd/chips/map_absent.c +++ b/drivers/mtd/chips/map_absent.c @@ -55,10 +55,10 @@ static struct mtd_info *map_absent_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ABSENT; mtd->size = map->size; - mtd->erase = map_absent_erase; - mtd->read = map_absent_read; - mtd->write = map_absent_write; - mtd->sync = map_absent_sync; + mtd->_erase = map_absent_erase; + mtd->_read = map_absent_read; + mtd->_write = map_absent_write; + mtd->_sync = map_absent_sync; mtd->flags = 0; mtd->erasesize = PAGE_SIZE; mtd->writesize = 1; diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index 67640ccb2d4..225307088dc 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -64,11 +64,11 @@ static struct mtd_info *map_ram_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_RAM; mtd->size = map->size; - mtd->erase = mapram_erase; - mtd->get_unmapped_area = mapram_unmapped_area; - mtd->read = mapram_read; - mtd->write = mapram_write; - mtd->sync = mapram_nop; + mtd->_erase = mapram_erase; + mtd->_get_unmapped_area = mapram_unmapped_area; + mtd->_read = mapram_read; + mtd->_write = mapram_write; + mtd->_sync = mapram_nop; mtd->flags = MTD_CAP_RAM; mtd->writesize = 1; diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 593f73d480d..facb56092d3 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -41,11 +41,11 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->name = map->name; mtd->type = MTD_ROM; mtd->size = map->size; - mtd->get_unmapped_area = maprom_unmapped_area; - mtd->read = maprom_read; - mtd->write = maprom_write; - mtd->sync = maprom_nop; - mtd->erase = maprom_erase; + mtd->_get_unmapped_area = maprom_unmapped_area; + mtd->_read = maprom_read; + mtd->_write = maprom_write; + mtd->_sync = maprom_nop; + mtd->_erase = maprom_erase; mtd->flags = MTD_CAP_ROM; mtd->erasesize = map->size; mtd->writesize = 1; diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index e7e46d1e746..d9e75dafdd4 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -285,11 +285,11 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.writesize = 1; dev->mtd.type = MTD_RAM; dev->mtd.flags = MTD_CAP_RAM; - dev->mtd.erase = block2mtd_erase; - dev->mtd.write = block2mtd_write; - dev->mtd.writev = mtd_writev; - dev->mtd.sync = block2mtd_sync; - dev->mtd.read = block2mtd_read; + dev->mtd._erase = block2mtd_erase; + dev->mtd._write = block2mtd_write; + dev->mtd._writev = mtd_writev; + dev->mtd._sync = block2mtd_sync; + dev->mtd._read = block2mtd_read; dev->mtd.priv = dev; dev->mtd.owner = THIS_MODULE; diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index b1cdf647901..ffd01a66a17 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -565,11 +565,11 @@ void DoC2k_init(struct mtd_info *mtd) mtd->writesize = 512; mtd->oobsize = 16; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; mutex_init(&this->lock); diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 7543b98f46c..3785733650c 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -349,11 +349,11 @@ void DoCMil_init(struct mtd_info *mtd) mtd->writesize = 512; mtd->oobsize = 16; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 177510d0e7e..409fa3174cc 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -470,11 +470,11 @@ void DoCMilPlus_init(struct mtd_info *mtd) mtd->writesize = 512; mtd->oobsize = 16; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; this->curfloor = -1; this->curchip = -1; diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index ad11ef0a81f..3746ae8ff0a 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -1820,12 +1820,12 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) mtd->writesize = DOC_LAYOUT_PAGE_SIZE; mtd->oobsize = DOC_LAYOUT_OOB_SIZE; mtd->owner = THIS_MODULE; - mtd->erase = doc_erase; - mtd->read = doc_read; - mtd->write = doc_write; - mtd->read_oob = doc_read_oob; - mtd->write_oob = doc_write_oob; - mtd->block_isbad = doc_block_isbad; + mtd->_erase = doc_erase; + mtd->_read = doc_read; + mtd->_write = doc_write; + mtd->_read_oob = doc_read_oob; + mtd->_write_oob = doc_write_oob; + mtd->_block_isbad = doc_block_isbad; mtd->ecclayout = &docg3_oobinfo; } diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 3a11ea628e5..a59584871af 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -635,9 +635,9 @@ static int __init lart_flash_init (void) mtd.erasesize = FLASH_BLOCKSIZE_MAIN; mtd.numeraseregions = ARRAY_SIZE(erase_regions); mtd.eraseregions = erase_regions; - mtd.erase = flash_erase; - mtd.read = flash_read; - mtd.write = flash_write; + mtd._erase = flash_erase; + mtd._read = flash_read; + mtd._write = flash_write; mtd.owner = THIS_MODULE; #ifdef LART_DEBUG diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 230b02e336a..f83e4d0366c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -908,14 +908,14 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.writesize = 1; flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd.erase = m25p80_erase; - flash->mtd.read = m25p80_read; + flash->mtd._erase = m25p80_erase; + flash->mtd._read = m25p80_read; /* sst flash chips use AAI word program */ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) - flash->mtd.write = sst_write; + flash->mtd._write = sst_write; else - flash->mtd.write = m25p80_write; + flash->mtd._write = m25p80_write; /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 8423fb6d4f2..3a05af529e7 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -215,8 +215,8 @@ static int __init ms02nv_init_one(ulong addr) mtd->size = fixsize; mtd->name = (char *)ms02nv_name; mtd->owner = THIS_MODULE; - mtd->read = ms02nv_read; - mtd->write = ms02nv_write; + mtd->_read = ms02nv_read; + mtd->_write = ms02nv_write; mtd->writesize = 1; ret = -EIO; diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 5ec5fc9fe04..fd4a9fc0d8b 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -611,16 +611,16 @@ static int dataflash_write_user_otp(struct mtd_info *mtd, static char *otp_setup(struct mtd_info *device, char revision) { - device->get_fact_prot_info = dataflash_get_otp_info; - device->read_fact_prot_reg = dataflash_read_fact_otp; - device->get_user_prot_info = dataflash_get_otp_info; - device->read_user_prot_reg = dataflash_read_user_otp; + device->_get_fact_prot_info = dataflash_get_otp_info; + device->_read_fact_prot_reg = dataflash_read_fact_otp; + device->_get_user_prot_info = dataflash_get_otp_info; + device->_read_user_prot_reg = dataflash_read_user_otp; /* rev c parts (at45db321c and at45db1281 only!) use a * different write procedure; not (yet?) implemented. */ if (revision > 'c') - device->write_user_prot_reg = dataflash_write_user_otp; + device->_write_user_prot_reg = dataflash_write_user_otp; return ", OTP"; } @@ -672,9 +672,9 @@ add_dataflash_otp(struct spi_device *spi, char *name, device->owner = THIS_MODULE; device->type = MTD_DATAFLASH; device->flags = MTD_WRITEABLE; - device->erase = dataflash_erase; - device->read = dataflash_read; - device->write = dataflash_write; + device->_erase = dataflash_erase; + device->_read = dataflash_read; + device->_write = dataflash_write; device->priv = priv; device->dev.parent = &spi->dev; diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 2562689ba6b..91030cfb03b 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -126,12 +126,12 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, mtd->priv = mapped_address; mtd->owner = THIS_MODULE; - mtd->erase = ram_erase; - mtd->point = ram_point; - mtd->unpoint = ram_unpoint; - mtd->get_unmapped_area = ram_get_unmapped_area; - mtd->read = ram_read; - mtd->write = ram_write; + mtd->_erase = ram_erase; + mtd->_point = ram_point; + mtd->_unpoint = ram_unpoint; + mtd->_get_unmapped_area = ram_get_unmapped_area; + mtd->_read = ram_read; + mtd->_write = ram_write; if (mtd_device_register(mtd, NULL, 0)) return -EIO; diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 23423bd00b0..eff2b69864f 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -142,11 +142,11 @@ static int register_device(char *name, unsigned long start, unsigned long len) new->mtd.name = name; new->mtd.size = len; new->mtd.flags = MTD_CAP_RAM; - new->mtd.erase = phram_erase; - new->mtd.point = phram_point; - new->mtd.unpoint = phram_unpoint; - new->mtd.read = phram_read; - new->mtd.write = phram_write; + new->mtd._erase = phram_erase; + new->mtd._point = phram_point; + new->mtd._unpoint = phram_unpoint; + new->mtd._read = phram_read; + new->mtd._write = phram_write; new->mtd.owner = THIS_MODULE; new->mtd.type = MTD_RAM; new->mtd.erasesize = PAGE_SIZE; diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index cfccf651041..67d22e1cbc0 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -787,11 +787,11 @@ static int __init init_pmc551(void) mtd->size = msize; mtd->flags = MTD_CAP_RAM; - mtd->erase = pmc551_erase; - mtd->read = pmc551_read; - mtd->write = pmc551_write; - mtd->point = pmc551_point; - mtd->unpoint = pmc551_unpoint; + mtd->_erase = pmc551_erase; + mtd->_read = pmc551_read; + mtd->_write = pmc551_write; + mtd->_point = pmc551_point; + mtd->_unpoint = pmc551_unpoint; mtd->type = MTD_RAM; mtd->name = "PMC551 RAM board"; mtd->erasesize = 0x10000; diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index e585263161b..cbeb19522bb 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -200,11 +200,11 @@ static int register_device(char *name, unsigned long start, unsigned long length (*curmtd)->mtdinfo->name = name; (*curmtd)->mtdinfo->size = length; (*curmtd)->mtdinfo->flags = MTD_CAP_RAM; - (*curmtd)->mtdinfo->erase = slram_erase; - (*curmtd)->mtdinfo->point = slram_point; - (*curmtd)->mtdinfo->unpoint = slram_unpoint; - (*curmtd)->mtdinfo->read = slram_read; - (*curmtd)->mtdinfo->write = slram_write; + (*curmtd)->mtdinfo->_erase = slram_erase; + (*curmtd)->mtdinfo->_point = slram_point; + (*curmtd)->mtdinfo->_unpoint = slram_unpoint; + (*curmtd)->mtdinfo->_read = slram_read; + (*curmtd)->mtdinfo->_write = slram_write; (*curmtd)->mtdinfo->owner = THIS_MODULE; (*curmtd)->mtdinfo->type = MTD_RAM; (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 0f0f1ac0649..5f425425464 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -846,9 +846,9 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) flash->mtd.erasesize = flash_devices[flash_index].sectorsize; flash->page_size = flash_devices[flash_index].pagesize; flash->erase_cmd = flash_devices[flash_index].erase_cmd; - flash->mtd.erase = spear_mtd_erase; - flash->mtd.read = spear_mtd_read; - flash->mtd.write = spear_mtd_write; + flash->mtd._erase = spear_mtd_erase; + flash->mtd._read = spear_mtd_read; + flash->mtd._write = spear_mtd_write; flash->dev_id = flash_devices[flash_index].device_id; dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n", diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index 196fd95b19d..a665eba96e7 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -403,9 +403,9 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.erasesize = flash_info->erase_size; flash->mtd.writesize = flash_info->page_size; flash->mtd.size = flash_info->page_size * flash_info->nr_pages; - flash->mtd.erase = sst25l_erase; - flash->mtd.read = sst25l_read; - flash->mtd.write = sst25l_write; + flash->mtd._erase = sst25l_erase; + flash->mtd._read = sst25l_read; + flash->mtd._write = sst25l_write; dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, (long long)flash->mtd.size >> 10); diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 28646c95cfb..3af35148409 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -56,7 +56,7 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (memcmp(mtd->name, "DiskOnChip", 10)) return; - if (!mtd->block_isbad) { + if (!mtd->_block_isbad) { printk(KERN_ERR "INFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" "Please use the new diskonchip driver under the NAND subsystem.\n"); diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 536bbceaeaa..fd19d3b1ee9 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -63,18 +63,18 @@ struct mtd_info *lpddr_cmdset(struct map_info *map) mtd->type = MTD_NORFLASH; /* Fill in the default mtd operations */ - mtd->read = lpddr_read; + mtd->_read = lpddr_read; mtd->type = MTD_NORFLASH; mtd->flags = MTD_CAP_NORFLASH; mtd->flags &= ~MTD_BIT_WRITEABLE; - mtd->erase = lpddr_erase; - mtd->write = lpddr_write_buffers; - mtd->writev = lpddr_writev; - mtd->lock = lpddr_lock; - mtd->unlock = lpddr_unlock; + mtd->_erase = lpddr_erase; + mtd->_write = lpddr_write_buffers; + mtd->_writev = lpddr_writev; + mtd->_lock = lpddr_lock; + mtd->_unlock = lpddr_unlock; if (map_is_linear(map)) { - mtd->point = lpddr_point; - mtd->unpoint = lpddr_unpoint; + mtd->_point = lpddr_point; + mtd->_unpoint = lpddr_unpoint; } mtd->size = 1 << lpddr->qinfo->DevSizeShift; mtd->erasesize = 1 << lpddr->qinfo->UniformBlockSizeShift; diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 6793074f3f4..cfff454f628 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -85,7 +85,7 @@ static int __init uclinux_mtd_init(void) } mtd->owner = THIS_MODULE; - mtd->point = uclinux_point; + mtd->_point = uclinux_point; mtd->priv = mapp; uclinux_ram_mtdinfo = mtd; diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c index 3a04b078576..48a803e2cd2 100644 --- a/drivers/mtd/maps/vmu-flash.c +++ b/drivers/mtd/maps/vmu-flash.c @@ -544,9 +544,9 @@ static void vmu_queryblocks(struct mapleq *mq) mtd_cur->flags = MTD_WRITEABLE|MTD_NO_ERASE; mtd_cur->size = part_cur->numblocks * card->blocklen; mtd_cur->erasesize = card->blocklen; - mtd_cur->write = vmu_flash_write; - mtd_cur->read = vmu_flash_read; - mtd_cur->sync = vmu_flash_sync; + mtd_cur->_write = vmu_flash_write; + mtd_cur->_read = vmu_flash_read; + mtd_cur->_sync = vmu_flash_sync; mtd_cur->writesize = card->blocklen; mpart = kmalloc(sizeof(struct mdev_part), GFP_KERNEL); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 50c6a1e7f67..426640eaf81 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -405,7 +405,7 @@ static int mtdchar_writeoob(struct file *file, struct mtd_info *mtd, if (length > 4096) return -EINVAL; - if (!mtd->write_oob) + if (!mtd->_write_oob) ret = -EOPNOTSUPP; else ret = access_ok(VERIFY_READ, ptr, length) ? 0 : -EFAULT; @@ -576,7 +576,7 @@ static int mtdchar_write_ioctl(struct mtd_info *mtd, !access_ok(VERIFY_READ, req.usr_data, req.len) || !access_ok(VERIFY_READ, req.usr_oob, req.ooblen)) return -EFAULT; - if (!mtd->write_oob) + if (!mtd->_write_oob) return -EOPNOTSUPP; ops.mode = req.mode; diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 1ed5103b219..5c7eb69c4ed 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -777,16 +777,16 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->mtd.subpage_sft = subdev[0]->subpage_sft; concat->mtd.oobsize = subdev[0]->oobsize; concat->mtd.oobavail = subdev[0]->oobavail; - if (subdev[0]->writev) - concat->mtd.writev = concat_writev; - if (subdev[0]->read_oob) - concat->mtd.read_oob = concat_read_oob; - if (subdev[0]->write_oob) - concat->mtd.write_oob = concat_write_oob; - if (subdev[0]->block_isbad) - concat->mtd.block_isbad = concat_block_isbad; - if (subdev[0]->block_markbad) - concat->mtd.block_markbad = concat_block_markbad; + if (subdev[0]->_writev) + concat->mtd._writev = concat_writev; + if (subdev[0]->_read_oob) + concat->mtd._read_oob = concat_read_oob; + if (subdev[0]->_write_oob) + concat->mtd._write_oob = concat_write_oob; + if (subdev[0]->_block_isbad) + concat->mtd._block_isbad = concat_block_isbad; + if (subdev[0]->_block_markbad) + concat->mtd._block_markbad = concat_block_markbad; concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks; @@ -833,8 +833,8 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c if (concat->mtd.writesize != subdev[i]->writesize || concat->mtd.subpage_sft != subdev[i]->subpage_sft || concat->mtd.oobsize != subdev[i]->oobsize || - !concat->mtd.read_oob != !subdev[i]->read_oob || - !concat->mtd.write_oob != !subdev[i]->write_oob) { + !concat->mtd._read_oob != !subdev[i]->_read_oob || + !concat->mtd._write_oob != !subdev[i]->_write_oob) { kfree(concat); printk("Incompatible OOB or ECC data on \"%s\"\n", subdev[i]->name); @@ -849,15 +849,15 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->num_subdev = num_devs; concat->mtd.name = name; - concat->mtd.erase = concat_erase; - concat->mtd.read = concat_read; - concat->mtd.write = concat_write; - concat->mtd.sync = concat_sync; - concat->mtd.lock = concat_lock; - concat->mtd.unlock = concat_unlock; - concat->mtd.suspend = concat_suspend; - concat->mtd.resume = concat_resume; - concat->mtd.get_unmapped_area = concat_get_unmapped_area; + concat->mtd._erase = concat_erase; + concat->mtd._read = concat_read; + concat->mtd._write = concat_write; + concat->mtd._sync = concat_sync; + concat->mtd._lock = concat_lock; + concat->mtd._unlock = concat_unlock; + concat->mtd._suspend = concat_suspend; + concat->mtd._resume = concat_resume; + concat->mtd._get_unmapped_area = concat_get_unmapped_area; /* * Combine the erase block size info of the subdevices: diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index de96865b4f9..aafe0ee9c9f 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -126,7 +126,7 @@ static int mtd_cls_resume(struct device *dev) { struct mtd_info *mtd = dev_get_drvdata(dev); - if (mtd && mtd->resume) + if (mtd && mtd->_resume) mtd_resume(mtd); return 0; } @@ -610,8 +610,8 @@ int __get_mtd_device(struct mtd_info *mtd) if (!try_module_get(mtd->owner)) return -ENODEV; - if (mtd->get_device) { - err = mtd->get_device(mtd); + if (mtd->_get_device) { + err = mtd->_get_device(mtd); if (err) { module_put(mtd->owner); @@ -675,8 +675,8 @@ void __put_mtd_device(struct mtd_info *mtd) --mtd->usecount; BUG_ON(mtd->usecount < 0); - if (mtd->put_device) - mtd->put_device(mtd); + if (mtd->_put_device) + mtd->_put_device(mtd); module_put(mtd->owner); } @@ -729,9 +729,9 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { *retlen = 0; - if (!mtd->writev) + if (!mtd->_writev) return default_mtd_writev(mtd, vecs, count, to, retlen); - return mtd->writev(mtd, vecs, count, to, retlen); + return mtd->_writev(mtd, vecs, count, to, retlen); } EXPORT_SYMBOL_GPL(mtd_writev); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 47d00f0bb36..4f01079e357 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -262,7 +262,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr) void mtd_erase_callback(struct erase_info *instr) { - if (instr->mtd->erase == part_erase) { + if (instr->mtd->_erase == part_erase) { struct mtd_part *part = PART(instr->mtd); if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) @@ -410,54 +410,55 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, */ slave->mtd.dev.parent = master->dev.parent; - slave->mtd.read = part_read; - slave->mtd.write = part_write; + slave->mtd._read = part_read; + slave->mtd._write = part_write; - if (master->panic_write) - slave->mtd.panic_write = part_panic_write; + if (master->_panic_write) + slave->mtd._panic_write = part_panic_write; - if (master->point && master->unpoint) { - slave->mtd.point = part_point; - slave->mtd.unpoint = part_unpoint; + if (master->_point && master->_unpoint) { + slave->mtd._point = part_point; + slave->mtd._unpoint = part_unpoint; } - if (master->get_unmapped_area) - slave->mtd.get_unmapped_area = part_get_unmapped_area; - if (master->read_oob) - slave->mtd.read_oob = part_read_oob; - if (master->write_oob) - slave->mtd.write_oob = part_write_oob; - if (master->read_user_prot_reg) - slave->mtd.read_user_prot_reg = part_read_user_prot_reg; - if (master->read_fact_prot_reg) - slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg; - if (master->write_user_prot_reg) - slave->mtd.write_user_prot_reg = part_write_user_prot_reg; - if (master->lock_user_prot_reg) - slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg; - if (master->get_user_prot_info) - slave->mtd.get_user_prot_info = part_get_user_prot_info; - if (master->get_fact_prot_info) - slave->mtd.get_fact_prot_info = part_get_fact_prot_info; - if (master->sync) - slave->mtd.sync = part_sync; - if (!partno && !master->dev.class && master->suspend && master->resume) { - slave->mtd.suspend = part_suspend; - slave->mtd.resume = part_resume; + if (master->_get_unmapped_area) + slave->mtd._get_unmapped_area = part_get_unmapped_area; + if (master->_read_oob) + slave->mtd._read_oob = part_read_oob; + if (master->_write_oob) + slave->mtd._write_oob = part_write_oob; + if (master->_read_user_prot_reg) + slave->mtd._read_user_prot_reg = part_read_user_prot_reg; + if (master->_read_fact_prot_reg) + slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg; + if (master->_write_user_prot_reg) + slave->mtd._write_user_prot_reg = part_write_user_prot_reg; + if (master->_lock_user_prot_reg) + slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg; + if (master->_get_user_prot_info) + slave->mtd._get_user_prot_info = part_get_user_prot_info; + if (master->_get_fact_prot_info) + slave->mtd._get_fact_prot_info = part_get_fact_prot_info; + if (master->_sync) + slave->mtd._sync = part_sync; + if (!partno && !master->dev.class && master->_suspend && + master->_resume) { + slave->mtd._suspend = part_suspend; + slave->mtd._resume = part_resume; } - if (master->writev) - slave->mtd.writev = part_writev; - if (master->lock) - slave->mtd.lock = part_lock; - if (master->unlock) - slave->mtd.unlock = part_unlock; - if (master->is_locked) - slave->mtd.is_locked = part_is_locked; - if (master->block_isbad) - slave->mtd.block_isbad = part_block_isbad; - if (master->block_markbad) - slave->mtd.block_markbad = part_block_markbad; - slave->mtd.erase = part_erase; + if (master->_writev) + slave->mtd._writev = part_writev; + if (master->_lock) + slave->mtd._lock = part_lock; + if (master->_unlock) + slave->mtd._unlock = part_unlock; + if (master->_is_locked) + slave->mtd._is_locked = part_is_locked; + if (master->_block_isbad) + slave->mtd._block_isbad = part_block_isbad; + if (master->_block_markbad) + slave->mtd._block_markbad = part_block_markbad; + slave->mtd._erase = part_erase; slave->master = master; slave->offset = part->offset; @@ -549,7 +550,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, } slave->mtd.ecclayout = master->ecclayout; - if (master->block_isbad) { + if (master->_block_isbad) { uint64_t offs = 0; while (offs < slave->mtd.size) { diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c index 6a5ff64a139..ac38f73fde3 100644 --- a/drivers/mtd/nand/alauda.c +++ b/drivers/mtd/nand/alauda.c @@ -585,10 +585,10 @@ static int alauda_init_media(struct alauda *al) mtd->writesize = 1<pageshift; mtd->type = MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->read = alauda_read; - mtd->write = alauda_write; - mtd->erase = alauda_erase; - mtd->block_isbad = alauda_isbad; + mtd->_read = alauda_read; + mtd->_write = alauda_write; + mtd->_erase = alauda_erase; + mtd->_block_isbad = alauda_isbad; mtd->priv = al; mtd->owner = THIS_MODULE; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index b9020661310..05f8243ed1d 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3483,21 +3483,21 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->type = MTD_NANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; - mtd->erase = nand_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = nand_read; - mtd->write = nand_write; - mtd->panic_write = panic_nand_write; - mtd->read_oob = nand_read_oob; - mtd->write_oob = nand_write_oob; - mtd->sync = nand_sync; - mtd->lock = NULL; - mtd->unlock = NULL; - mtd->suspend = nand_suspend; - mtd->resume = nand_resume; - mtd->block_isbad = nand_block_isbad; - mtd->block_markbad = nand_block_markbad; + mtd->_erase = nand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read = nand_read; + mtd->_write = nand_write; + mtd->_panic_write = panic_nand_write; + mtd->_read_oob = nand_read_oob; + mtd->_write_oob = nand_write_oob; + mtd->_sync = nand_sync; + mtd->_lock = NULL; + mtd->_unlock = NULL; + mtd->_suspend = nand_suspend; + mtd->_resume = nand_resume; + mtd->_block_isbad = nand_block_isbad; + mtd->_block_markbad = nand_block_markbad; mtd->writebufsize = mtd->writesize; /* propagate ecc.layout to mtd_info */ diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index a061bc163da..914c49bdf2b 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -4107,29 +4107,29 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) /* Fill in remaining MTD driver data */ mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH; - mtd->erase = onenand_erase; - mtd->point = NULL; - mtd->unpoint = NULL; - mtd->read = onenand_read; - mtd->write = onenand_write; - mtd->read_oob = onenand_read_oob; - mtd->write_oob = onenand_write_oob; - mtd->panic_write = onenand_panic_write; + mtd->_erase = onenand_erase; + mtd->_point = NULL; + mtd->_unpoint = NULL; + mtd->_read = onenand_read; + mtd->_write = onenand_write; + mtd->_read_oob = onenand_read_oob; + mtd->_write_oob = onenand_write_oob; + mtd->_panic_write = onenand_panic_write; #ifdef CONFIG_MTD_ONENAND_OTP - mtd->get_fact_prot_info = onenand_get_fact_prot_info; - mtd->read_fact_prot_reg = onenand_read_fact_prot_reg; - mtd->get_user_prot_info = onenand_get_user_prot_info; - mtd->read_user_prot_reg = onenand_read_user_prot_reg; - mtd->write_user_prot_reg = onenand_write_user_prot_reg; - mtd->lock_user_prot_reg = onenand_lock_user_prot_reg; + mtd->_get_fact_prot_info = onenand_get_fact_prot_info; + mtd->_read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->_get_user_prot_info = onenand_get_user_prot_info; + mtd->_read_user_prot_reg = onenand_read_user_prot_reg; + mtd->_write_user_prot_reg = onenand_write_user_prot_reg; + mtd->_lock_user_prot_reg = onenand_lock_user_prot_reg; #endif - mtd->sync = onenand_sync; - mtd->lock = onenand_lock; - mtd->unlock = onenand_unlock; - mtd->suspend = onenand_suspend; - mtd->resume = onenand_resume; - mtd->block_isbad = onenand_block_isbad; - mtd->block_markbad = onenand_block_markbad; + mtd->_sync = onenand_sync; + mtd->_lock = onenand_lock; + mtd->_unlock = onenand_unlock; + mtd->_suspend = onenand_suspend; + mtd->_resume = onenand_resume; + mtd->_block_isbad = onenand_block_isbad; + mtd->_block_markbad = onenand_block_markbad; mtd->owner = THIS_MODULE; mtd->writebufsize = mtd->writesize; diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 941bc3c05d6..0101dce90c4 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -340,11 +340,11 @@ static int gluebi_create(struct ubi_device_info *di, mtd->owner = THIS_MODULE; mtd->writesize = di->min_io_size; mtd->erasesize = vi->usable_leb_size; - mtd->read = gluebi_read; - mtd->write = gluebi_write; - mtd->erase = gluebi_erase; - mtd->get_device = gluebi_get_device; - mtd->put_device = gluebi_put_device; + mtd->_read = gluebi_read; + mtd->_write = gluebi_write; + mtd->_erase = gluebi_erase; + mtd->_get_device = gluebi_get_device; + mtd->_put_device = gluebi_put_device; /* * In case of dynamic a volume, MTD device size is just volume size. In diff --git a/drivers/net/ethernet/sfc/mtd.c b/drivers/net/ethernet/sfc/mtd.c index bc9dcd6b30d..6622eca09cb 100644 --- a/drivers/net/ethernet/sfc/mtd.c +++ b/drivers/net/ethernet/sfc/mtd.c @@ -263,10 +263,10 @@ static int efx_mtd_probe_device(struct efx_nic *efx, struct efx_mtd *efx_mtd) part->mtd.owner = THIS_MODULE; part->mtd.priv = efx_mtd; part->mtd.name = part->name; - part->mtd.erase = efx_mtd_erase; - part->mtd.read = efx_mtd->ops->read; - part->mtd.write = efx_mtd->ops->write; - part->mtd.sync = efx_mtd_sync; + part->mtd._erase = efx_mtd_erase; + part->mtd._read = efx_mtd->ops->read; + part->mtd._write = efx_mtd->ops->write; + part->mtd._sync = efx_mtd_sync; if (mtd_device_register(&part->mtd, NULL, 0)) goto fail; diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index d43dc25af82..e2e545616b2 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -174,52 +174,52 @@ struct mtd_info { * Do not call via these pointers, use corresponding mtd_*() * wrappers instead. */ - int (*erase) (struct mtd_info *mtd, struct erase_info *instr); - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys); - void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); - unsigned long (*get_unmapped_area) (struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags); - int (*read) (struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); - int (*write) (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); - int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); - int (*read_oob) (struct mtd_info *mtd, loff_t from, - struct mtd_oob_ops *ops); - int (*write_oob) (struct mtd_info *mtd, loff_t to, + int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); + int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + unsigned long (*_get_unmapped_area) (struct mtd_info *mtd, + unsigned long len, + unsigned long offset, + unsigned long flags); + int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); + int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + int (*_read_oob) (struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); - int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, - size_t len); - int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf); - int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, - size_t len); - int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf); - int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, u_char *buf); - int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, - size_t len); - int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, + int (*_write_oob) (struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); + int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, + size_t len); + int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf); + int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, u_char *buf); + int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, + size_t len); + int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); - void (*sync) (struct mtd_info *mtd); - int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); - int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); - int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); - int (*suspend) (struct mtd_info *mtd); - void (*resume) (struct mtd_info *mtd); + void (*_sync) (struct mtd_info *mtd); + int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); + int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); + int (*_suspend) (struct mtd_info *mtd); + void (*_resume) (struct mtd_info *mtd); /* * If the driver is something smart, like UBI, it may need to maintain * its own reference counting. The below functions are only for driver. */ - int (*get_device) (struct mtd_info *mtd); - void (*put_device) (struct mtd_info *mtd); + int (*_get_device) (struct mtd_info *mtd); + void (*_put_device) (struct mtd_info *mtd); /* Backing device capabilities for this device * - provides mmap capabilities @@ -249,7 +249,7 @@ struct mtd_info { */ static inline int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) { - return mtd->erase(mtd, instr); + return mtd->_erase(mtd, instr); } /* @@ -259,15 +259,15 @@ static inline int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys) { *retlen = 0; - if (!mtd->point) + if (!mtd->_point) return -EOPNOTSUPP; - return mtd->point(mtd, from, len, retlen, virt, phys); + return mtd->_point(mtd, from, len, retlen, virt, phys); } /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ static inline void mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { - return mtd->unpoint(mtd, from, len); + return mtd->_unpoint(mtd, from, len); } /* @@ -280,24 +280,24 @@ static inline unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long offset, unsigned long flags) { - if (!mtd->get_unmapped_area) + if (!mtd->_get_unmapped_area) return -EOPNOTSUPP; - return mtd->get_unmapped_area(mtd, len, offset, flags); + return mtd->_get_unmapped_area(mtd, len, offset, flags); } static inline int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { - return mtd->read(mtd, from, len, retlen, buf); + return mtd->_read(mtd, from, len, retlen, buf); } static inline int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { *retlen = 0; - if (!mtd->write) + if (!mtd->_write) return -EROFS; - return mtd->write(mtd, to, len, retlen, buf); + return mtd->_write(mtd, to, len, retlen, buf); } /* @@ -311,27 +311,27 @@ static inline int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { *retlen = 0; - if (!mtd->panic_write) + if (!mtd->_panic_write) return -EOPNOTSUPP; - return mtd->panic_write(mtd, to, len, retlen, buf); + return mtd->_panic_write(mtd, to, len, retlen, buf); } static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { ops->retlen = ops->oobretlen = 0; - if (!mtd->read_oob) + if (!mtd->_read_oob) return -EOPNOTSUPP; - return mtd->read_oob(mtd, from, ops); + return mtd->_read_oob(mtd, from, ops); } static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { ops->retlen = ops->oobretlen = 0; - if (!mtd->write_oob) + if (!mtd->_write_oob) return -EOPNOTSUPP; - return mtd->write_oob(mtd, to, ops); + return mtd->_write_oob(mtd, to, ops); } /* @@ -342,9 +342,9 @@ static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, static inline int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, size_t len) { - if (!mtd->get_fact_prot_info) + if (!mtd->_get_fact_prot_info) return -EOPNOTSUPP; - return mtd->get_fact_prot_info(mtd, buf, len); + return mtd->_get_fact_prot_info(mtd, buf, len); } static inline int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, @@ -352,18 +352,18 @@ static inline int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, u_char *buf) { *retlen = 0; - if (!mtd->read_fact_prot_reg) + if (!mtd->_read_fact_prot_reg) return -EOPNOTSUPP; - return mtd->read_fact_prot_reg(mtd, from, len, retlen, buf); + return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf); } static inline int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, size_t len) { - if (!mtd->get_user_prot_info) + if (!mtd->_get_user_prot_info) return -EOPNOTSUPP; - return mtd->get_user_prot_info(mtd, buf, len); + return mtd->_get_user_prot_info(mtd, buf, len); } static inline int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, @@ -371,9 +371,9 @@ static inline int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, u_char *buf) { *retlen = 0; - if (!mtd->read_user_prot_reg) + if (!mtd->_read_user_prot_reg) return -EOPNOTSUPP; - return mtd->read_user_prot_reg(mtd, from, len, retlen, buf); + return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf); } static inline int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, @@ -381,17 +381,17 @@ static inline int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, u_char *buf) { *retlen = 0; - if (!mtd->write_user_prot_reg) + if (!mtd->_write_user_prot_reg) return -EOPNOTSUPP; - return mtd->write_user_prot_reg(mtd, to, len, retlen, buf); + return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); } static inline int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) { - if (!mtd->lock_user_prot_reg) + if (!mtd->_lock_user_prot_reg) return -EOPNOTSUPP; - return mtd->lock_user_prot_reg(mtd, from, len); + return mtd->_lock_user_prot_reg(mtd, from, len); } int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, @@ -399,55 +399,55 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, static inline void mtd_sync(struct mtd_info *mtd) { - if (mtd->sync) - mtd->sync(mtd); + if (mtd->_sync) + mtd->_sync(mtd); } /* Chip-supported device locking */ static inline int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { - if (!mtd->lock) + if (!mtd->_lock) return -EOPNOTSUPP; - return mtd->lock(mtd, ofs, len); + return mtd->_lock(mtd, ofs, len); } static inline int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { - if (!mtd->unlock) + if (!mtd->_unlock) return -EOPNOTSUPP; - return mtd->unlock(mtd, ofs, len); + return mtd->_unlock(mtd, ofs, len); } static inline int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) { - if (!mtd->is_locked) + if (!mtd->_is_locked) return -EOPNOTSUPP; - return mtd->is_locked(mtd, ofs, len); + return mtd->_is_locked(mtd, ofs, len); } static inline int mtd_suspend(struct mtd_info *mtd) { - return mtd->suspend ? mtd->suspend(mtd) : 0; + return mtd->_suspend ? mtd->_suspend(mtd) : 0; } static inline void mtd_resume(struct mtd_info *mtd) { - if (mtd->resume) - mtd->resume(mtd); + if (mtd->_resume) + mtd->_resume(mtd); } static inline int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) { - if (!mtd->block_isbad) + if (!mtd->_block_isbad) return 0; - return mtd->block_isbad(mtd, ofs); + return mtd->_block_isbad(mtd, ofs); } static inline int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) { - if (!mtd->block_markbad) + if (!mtd->_block_markbad) return -EOPNOTSUPP; - return mtd->block_markbad(mtd, ofs); + return mtd->_block_markbad(mtd, ofs); } static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) @@ -482,12 +482,12 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) static inline int mtd_has_oob(const struct mtd_info *mtd) { - return mtd->read_oob && mtd->write_oob; + return mtd->_read_oob && mtd->_write_oob; } static inline int mtd_can_have_bb(const struct mtd_info *mtd) { - return !!mtd->block_isbad; + return !!mtd->_block_isbad; } /* Kernel-side ioctl definitions */ -- cgit v1.2.3-70-g09d2 From e2414f4c20bd4dc62186fbfd7bdec50bce6d2ead Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 6 Feb 2012 13:44:00 -0800 Subject: mtd: nand: write BBM to OOB even with flash-based BBT Currently, the flash-based BBT implementation writes bad block data only to its flash-based table and not to the OOB marker area. Then, as new bad blocks are marked over time, the OOB markers become incomplete and the flash-based table becomes the only source of current bad block information. This becomes an obvious problem when, for example: * bootloader cannot read the flash-based BBT format * BBT is corrupted and the flash must be rescanned for bad blocks; we want to remember bad blocks that were marked from Linux So to keep the bad block markers in sync with the flash-based BBT, this patch changes the default so that we write bad block markers to the proper OOB area on each block in addition to flash-based BBT. Comments are updated, expanded, and/or relocated as necessary. The new flash-based BBT procedure for marking bad blocks: (1) erase the affected block, to allow OOB marker to be written cleanly (2) update in-memory BBT (3) write bad block marker to OOB area of affected block (4) update flash-based BBT Note that we retain the first error encountered in (3) or (4), finish the procedures, and dump the error in the end. This should handle power cuts gracefully enough. (1) and (2) are mostly harmless (note that (1) will not erase an already-recognized bad block). The OOB and BBT may be "out of sync" if we experience power loss bewteen (3) and (4), but we can reasonably expect that on next boot, subsequent I/O operations will discover that the block should be marked bad again, thus re-syncing the OOB and BBT. Note that this is a change from the previous default flash-based BBT behavior. If your system cannot support writing bad block markers to OOB, use the new NAND_BBT_NO_OOB_BBM option (in combination with NAND_BBT_USE_FLASH and NAND_BBT_NO_OOB). Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 46 +++++++++++++++++++++++++++++--------------- include/linux/mtd/bbm.h | 5 +++++ 2 files changed, 36 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 05f8243ed1d..13a56d3e8ae 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -392,15 +392,23 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) * @ofs: offset from device start * * This is the default implementation, which can be overridden by a hardware - * specific driver. + * specific driver. We try operations in the following order, according to our + * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH): + * (1) erase the affected block, to allow OOB marker to be written cleanly + * (2) update in-memory BBT + * (3) write bad block marker to OOB area of affected block + * (4) update flash-based BBT + * Note that we retain the first error encountered in (3) or (4), finish the + * procedures, and dump the error in the end. */ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd->priv; uint8_t buf[2] = { 0, 0 }; - int block, ret, i = 0; + int block, res, ret = 0, i = 0; + int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM); - if (!(chip->bbt_options & NAND_BBT_USE_FLASH)) { + if (write_oob) { struct erase_info einfo; /* Attempt erase before marking OOB */ @@ -413,23 +421,17 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* Get block number */ block = (int)(ofs >> chip->bbt_erase_shift); + /* Mark block bad in memory-based BBT */ if (chip->bbt) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); - /* Do we have a flash based bad block table? */ - if (chip->bbt_options & NAND_BBT_USE_FLASH) - ret = nand_update_bbt(mtd, ofs); - else { + /* Write bad block marker to OOB */ + if (write_oob) { struct mtd_oob_ops ops; loff_t wr_ofs = ofs; nand_get_device(chip, mtd, FL_WRITING); - /* - * Write to first/last page(s) if necessary. If we write to more - * than one location, the first error encountered quits the - * procedure. - */ ops.datbuf = NULL; ops.oobbuf = buf; ops.ooboffs = chip->badblockpos; @@ -441,18 +443,28 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) } ops.mode = MTD_OPS_PLACE_OOB; + /* Write to first/last page(s) if necessary */ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) wr_ofs += mtd->erasesize - mtd->writesize; do { - ret = nand_do_write_oob(mtd, wr_ofs, &ops); + res = nand_do_write_oob(mtd, wr_ofs, &ops); + if (!ret) + ret = res; i++; wr_ofs += mtd->writesize; - } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && - i < 2); + } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2); nand_release_device(mtd); } + + /* Update flash-based bad block table */ + if (chip->bbt_options & NAND_BBT_USE_FLASH) { + res = nand_update_bbt(mtd, ofs); + if (!ret) + ret = res; + } + if (!ret) mtd->ecc_stats.badblocks++; @@ -3260,6 +3272,10 @@ int nand_scan_tail(struct mtd_info *mtd) int i; struct nand_chip *chip = mtd->priv; + /* New bad blocks should be marked in OOB, flash-based BBT, or both */ + BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) && + !(chip->bbt_options & NAND_BBT_USE_FLASH)); + if (!(chip->options & NAND_OWN_BUFFERS)) chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); if (!chip->buffers) diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index c4eec228eef..650ef352f04 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -112,6 +112,11 @@ struct nand_bbt_descr { #define NAND_BBT_USE_FLASH 0x00020000 /* Do not store flash based bad block table in OOB area; store it in-band */ #define NAND_BBT_NO_OOB 0x00040000 +/* + * Do not write new bad block markers to OOB; useful, e.g., when ECC covers + * entire spare area. Must be used with NAND_BBT_USE_FLASH. + */ +#define NAND_BBT_NO_OOB_BBM 0x00080000 /* * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr -- cgit v1.2.3-70-g09d2 From 5e4e6e3fdf48c1b012e2b6e80ed1d7e99d4fa6d1 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 3 Feb 2012 13:20:43 +0200 Subject: mtd: return error code from mtd_unpoint The 'mtd_unpoint()' API function should be able to return an error code because it may fail if you specify incorrect offset. This patch changes this MTD API function and amends all the drivers correspondingly. Also return '-EOPNOTSUPP' from 'mtd_unpoint()' when the '->unpoint()' method is undefined. We do not really need this currently, but this just makes sense to be consistent with 'mtd_point()'. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 16 ++++++++++------ drivers/mtd/devices/mtdram.c | 3 ++- drivers/mtd/devices/phram.c | 3 ++- drivers/mtd/devices/pmc551.c | 3 ++- drivers/mtd/devices/slram.c | 5 +++-- drivers/mtd/lpddr/lpddr_cmds.c | 12 ++++++++---- drivers/mtd/mtdpart.c | 4 ++-- include/linux/mtd/mtd.h | 6 ++++-- include/linux/mtd/pmc551.h | 1 - 9 files changed, 33 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 152accf4bf8..4d04551cffd 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -87,7 +87,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private ** static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); -static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode); static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode); @@ -1369,12 +1369,12 @@ static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; unsigned long ofs; - int chipnum; + int chipnum, err = 0; /* Now unlock the chip(s) POINT state */ @@ -1382,7 +1382,7 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) chipnum = (from >> cfi->chipshift); ofs = from - (chipnum << cfi->chipshift); - while (len) { + while (len && !err) { unsigned long thislen; struct flchip *chip; @@ -1400,8 +1400,10 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) chip->ref_point_counter--; if(chip->ref_point_counter == 0) chip->state = FL_READY; - } else - printk(KERN_ERR "%s: Warning: unpoint called on non pointed region\n", map->name); /* Should this give an error? */ + } else { + printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name); + err = -EINVAL; + } put_chip(map, chip, chip->start); mutex_unlock(&chip->mutex); @@ -1410,6 +1412,8 @@ static void cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) ofs = 0; chipnum++; } + + return err; } static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 91030cfb03b..e1f017bf077 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -60,8 +60,9 @@ static int ram_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int ram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } /* diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index eff2b69864f..38035551a7d 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -70,8 +70,9 @@ static int phram_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int phram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int phram_read(struct mtd_info *mtd, loff_t from, size_t len, diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 67d22e1cbc0..933127ecebe 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -206,11 +206,12 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, return 0; } -static void pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int pmc551_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif + return 0; } static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index cbeb19522bb..9431ffc761c 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -76,7 +76,7 @@ static slram_mtd_list_t *slram_mtdlist = NULL; static int slram_erase(struct mtd_info *, struct erase_info *); static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **, resource_size_t *); -static void slram_unpoint(struct mtd_info *, loff_t, size_t); +static int slram_unpoint(struct mtd_info *, loff_t, size_t); static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -119,8 +119,9 @@ static int slram_point(struct mtd_info *mtd, loff_t from, size_t len, return(0); } -static void slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + return 0; } static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index fd19d3b1ee9..de960b1d395 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -40,7 +40,7 @@ static int lpddr_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int lpddr_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, size_t *retlen, void **mtdbuf, resource_size_t *phys); -static void lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len); +static int lpddr_unpoint(struct mtd_info *mtd, loff_t adr, size_t len); static int get_chip(struct map_info *map, struct flchip *chip, int mode); static int chip_ready(struct map_info *map, struct flchip *chip, int mode); static void put_chip(struct map_info *map, struct flchip *chip); @@ -575,11 +575,11 @@ static int lpddr_point(struct mtd_info *mtd, loff_t adr, size_t len, return 0; } -static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) +static int lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) { struct map_info *map = mtd->priv; struct lpddr_private *lpddr = map->fldrv_priv; - int chipnum = adr >> lpddr->chipshift; + int chipnum = adr >> lpddr->chipshift, err = 0; unsigned long ofs; /* ofs: offset within the first chip that the first read should start */ @@ -603,9 +603,11 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) chip->ref_point_counter--; if (chip->ref_point_counter == 0) chip->state = FL_READY; - } else + } else { printk(KERN_WARNING "%s: Warning: unpoint called on non" "pointed region\n", map->name); + err = -EINVAL; + } put_chip(map, chip); mutex_unlock(&chip->mutex); @@ -614,6 +616,8 @@ static void lpddr_unpoint (struct mtd_info *mtd, loff_t adr, size_t len) ofs = 0; chipnum++; } + + return err; } static int lpddr_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 4f01079e357..da8a0b28316 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -92,11 +92,11 @@ static int part_point(struct mtd_info *mtd, loff_t from, size_t len, virt, phys); } -static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); - mtd_unpoint(part->master, from + part->offset, len); + return mtd_unpoint(part->master, from + part->offset, len); } static unsigned long part_get_unmapped_area(struct mtd_info *mtd, diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index e2e545616b2..8c243117c08 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -177,7 +177,7 @@ struct mtd_info { int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); - void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); + int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); unsigned long (*_get_unmapped_area) (struct mtd_info *mtd, unsigned long len, unsigned long offset, @@ -265,8 +265,10 @@ static inline int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, } /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ -static inline void mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +static inline int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) { + if (!mtd->_point) + return -EOPNOTSUPP; return mtd->_unpoint(mtd, from, len); } diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h index 27ad40aed19..da8b98d1b33 100644 --- a/include/linux/mtd/pmc551.h +++ b/include/linux/mtd/pmc551.h @@ -34,7 +34,6 @@ struct mypriv { * Function Prototypes */ static int pmc551_erase(struct mtd_info *, struct erase_info *); -static void pmc551_unpoint(struct mtd_info *, loff_t, size_t); static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); -- cgit v1.2.3-70-g09d2 From 8273a0c911d8e068297ef70aa7241ee78db4c712 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 3 Feb 2012 14:34:14 +0200 Subject: mtd: add offset and length checks to the API function Add verification of the offset and length to MTD API functions and verify that MTD device offset and length are within MTD device size. The modified API functions are: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch also uninlines these functions and exports in mtdcore.c because they are not performance-critical and do not have to be inlined. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 148 ++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/mtd.h | 129 ++++++----------------------------------- 2 files changed, 165 insertions(+), 112 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 5ea22cf357f..8d5e103695f 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -682,6 +682,154 @@ void __put_mtd_device(struct mtd_info *mtd) } EXPORT_SYMBOL_GPL(__put_mtd_device); +/* + * Erase is an asynchronous operation. Device drivers are supposed + * to call instr->callback() whenever the operation completes, even + * if it completes with a failure. + * Callers are supposed to pass a callback function and wait for it + * to be called before writing to the block. + */ +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr) + return -EINVAL; + return mtd->_erase(mtd, instr); +} +EXPORT_SYMBOL_GPL(mtd_erase); + +/* + * This stuff for eXecute-In-Place. phys is optional and may be set to NULL. + */ +int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys) +{ + *retlen = 0; + if (!mtd->_point) + return -EOPNOTSUPP; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + return mtd->_point(mtd, from, len, retlen, virt, phys); +} +EXPORT_SYMBOL_GPL(mtd_point); + +/* We probably shouldn't allow XIP if the unpoint isn't a NULL */ +int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + if (!mtd->_point) + return -EOPNOTSUPP; + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + return mtd->_unpoint(mtd, from, len); +} +EXPORT_SYMBOL_GPL(mtd_unpoint); + +/* + * Allow NOMMU mmap() to directly map the device (if not NULL) + * - return the address to which the offset maps + * - return -ENOSYS to indicate refusal to do the mapping + */ +unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, + unsigned long offset, unsigned long flags) +{ + if (!mtd->_get_unmapped_area) + return -EOPNOTSUPP; + if (offset > mtd->size || len > mtd->size - offset) + return -EINVAL; + return mtd->_get_unmapped_area(mtd, len, offset, flags); +} +EXPORT_SYMBOL_GPL(mtd_get_unmapped_area); + +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf) +{ + if (from < 0 || from > mtd->size || len > mtd->size - from) + return -EINVAL; + return mtd->_read(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read); + +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf) +{ + *retlen = 0; + if (!mtd->_write) + return -EROFS; + if (to < 0 || to > mtd->size || len > mtd->size - to) + return -EINVAL; + return mtd->_write(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_write); + +/* + * In blackbox flight recorder like scenarios we want to make successful writes + * in interrupt context. panic_write() is only intended to be called when its + * known the kernel is about to panic and we need the write to succeed. Since + * the kernel is not going to be running for much longer, this function can + * break locks and delay to ensure the write succeeds (but not sleep). + */ +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf) +{ + *retlen = 0; + if (!mtd->_panic_write) + return -EOPNOTSUPP; + if (to < 0 || to > mtd->size || len > mtd->size - to) + return -EINVAL; + return mtd->_panic_write(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_panic_write); + +/* Chip-supported device locking */ +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_lock) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + return mtd->_lock(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_lock); + +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_unlock) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + return mtd->_unlock(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_unlock); + +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + if (!mtd->_is_locked) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size || len > mtd->size - ofs) + return -EINVAL; + return mtd->_is_locked(mtd, ofs, len); +} +EXPORT_SYMBOL_GPL(mtd_is_locked); + +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + if (!mtd->_block_isbad) + return 0; + if (ofs < 0 || ofs > mtd->size) + return -EINVAL; + return mtd->_block_isbad(mtd, ofs); +} +EXPORT_SYMBOL_GPL(mtd_block_isbad); + +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + if (!mtd->_block_markbad) + return -EOPNOTSUPP; + if (ofs < 0 || ofs > mtd->size) + return -EINVAL; + return mtd->_block_markbad(mtd, ofs); +} +EXPORT_SYMBOL_GPL(mtd_block_markbad); + /* * default_mtd_writev - the default writev method * @mtd: mtd device description object pointer diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 8c243117c08..317a80c4d54 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -240,83 +240,18 @@ struct mtd_info { int usecount; }; -/* - * Erase is an asynchronous operation. Device drivers are supposed - * to call instr->callback() whenever the operation completes, even - * if it completes with a failure. - * Callers are supposed to pass a callback function and wait for it - * to be called before writing to the block. - */ -static inline int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - return mtd->_erase(mtd, instr); -} - -/* - * This stuff for eXecute-In-Place. phys is optional and may be set to NULL. - */ -static inline int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys) -{ - *retlen = 0; - if (!mtd->_point) - return -EOPNOTSUPP; - return mtd->_point(mtd, from, len, retlen, virt, phys); -} - -/* We probably shouldn't allow XIP if the unpoint isn't a NULL */ -static inline int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len) -{ - if (!mtd->_point) - return -EOPNOTSUPP; - return mtd->_unpoint(mtd, from, len); -} - -/* - * Allow NOMMU mmap() to directly map the device (if not NULL) - * - return the address to which the offset maps - * - return -ENOSYS to indicate refusal to do the mapping - */ -static inline unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, - unsigned long len, - unsigned long offset, - unsigned long flags) -{ - if (!mtd->_get_unmapped_area) - return -EOPNOTSUPP; - return mtd->_get_unmapped_area(mtd, len, offset, flags); -} - -static inline int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - return mtd->_read(mtd, from, len, retlen, buf); -} - -static inline int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - *retlen = 0; - if (!mtd->_write) - return -EROFS; - return mtd->_write(mtd, to, len, retlen, buf); -} - -/* - * In blackbox flight recorder like scenarios we want to make successful writes - * in interrupt context. panic_write() is only intended to be called when its - * known the kernel is about to panic and we need the write to succeed. Since - * the kernel is not going to be running for much longer, this function can - * break locks and delay to ensure the write succeeds (but not sleep). - */ -static inline int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - *retlen = 0; - if (!mtd->_panic_write) - return -EOPNOTSUPP; - return mtd->_panic_write(mtd, to, len, retlen, buf); -} +int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); +int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys); +int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len); +unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, + unsigned long offset, unsigned long flags); +int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + u_char *buf); +int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); +int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, + const u_char *buf); static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) @@ -405,27 +340,11 @@ static inline void mtd_sync(struct mtd_info *mtd) mtd->_sync(mtd); } -/* Chip-supported device locking */ -static inline int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - if (!mtd->_lock) - return -EOPNOTSUPP; - return mtd->_lock(mtd, ofs, len); -} - -static inline int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - if (!mtd->_unlock) - return -EOPNOTSUPP; - return mtd->_unlock(mtd, ofs, len); -} - -static inline int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) -{ - if (!mtd->_is_locked) - return -EOPNOTSUPP; - return mtd->_is_locked(mtd, ofs, len); -} +int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); +int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); +int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); static inline int mtd_suspend(struct mtd_info *mtd) { @@ -438,20 +357,6 @@ static inline void mtd_resume(struct mtd_info *mtd) mtd->_resume(mtd); } -static inline int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs) -{ - if (!mtd->_block_isbad) - return 0; - return mtd->_block_isbad(mtd, ofs); -} - -static inline int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) -{ - if (!mtd->_block_markbad) - return -EOPNOTSUPP; - return mtd->_block_markbad(mtd, ofs); -} - static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) { if (mtd->erasesize_shift) -- cgit v1.2.3-70-g09d2 From 664addc248d2fed68d013d26ff2fc796d7134259 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 3 Feb 2012 18:13:23 +0200 Subject: mtd: remove R/O checking duplication Many drivers check whether the partition is R/O and return -EROFS if yes. Let's stop having duplicated checks and move them to the API functions instead. And again a bit of noise - deleted few too sparse newlines, sorry. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/map_ram.c | 4 ---- drivers/mtd/chips/map_rom.c | 3 +-- drivers/mtd/devices/phram.c | 1 - drivers/mtd/mtdconcat.c | 27 +++------------------------ drivers/mtd/mtdcore.c | 12 ++++++++++-- drivers/mtd/mtdpart.c | 14 +------------- drivers/mtd/ubi/gluebi.c | 8 -------- include/linux/mtd/mtd.h | 2 ++ 8 files changed, 17 insertions(+), 54 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c index 225307088dc..991c2a1c05d 100644 --- a/drivers/mtd/chips/map_ram.c +++ b/drivers/mtd/chips/map_ram.c @@ -122,14 +122,10 @@ static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr) unsigned long i; allff = map_word_ff(map); - for (i=0; ilen; i += map_bankwidth(map)) map_write(map, allff, instr->addr + i); - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; } diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index facb56092d3..47a43cf7e5c 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -85,8 +85,7 @@ static void maprom_nop(struct mtd_info *mtd) static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { - printk(KERN_NOTICE "maprom_write called\n"); - return -EIO; + return -EROFS; } static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 36add7ce463..d0e8dc69fe1 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -33,7 +33,6 @@ struct phram_mtd_list { static LIST_HEAD(phram_list); - static int phram_erase(struct mtd_info *mtd, struct erase_info *instr) { u_char *start = mtd->priv; diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 1f207180393..dd24232265e 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -126,9 +126,6 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len, int err = -EINVAL; int i; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - *retlen = 0; for (i = 0; i < concat->num_subdev; i++) { @@ -145,11 +142,7 @@ concat_write(struct mtd_info *mtd, loff_t to, size_t len, else size = len; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else - err = mtd_write(subdev, to, size, &retsize, buf); - + err = mtd_write(subdev, to, size, &retsize, buf); if (err) break; @@ -176,9 +169,6 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs, int i; int err = -EINVAL; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - *retlen = 0; /* Calculate total length of data */ @@ -220,12 +210,8 @@ concat_writev(struct mtd_info *mtd, const struct kvec *vecs, old_iov_len = vecs_copy[entry_high].iov_len; vecs_copy[entry_high].iov_len = size; - if (!(subdev->flags & MTD_WRITEABLE)) - err = -EROFS; - else - err = mtd_writev(subdev, &vecs_copy[entry_low], - entry_high - entry_low + 1, to, - &retsize); + err = mtd_writev(subdev, &vecs_copy[entry_low], + entry_high - entry_low + 1, to, &retsize); vecs_copy[entry_high].iov_len = old_iov_len - size; vecs_copy[entry_high].iov_base += size; @@ -399,9 +385,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) uint64_t length, offset = 0; struct erase_info *erase; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - /* * Check for proper erase block alignment of the to-be-erased area. * It is easier to do this based on the super device's erase @@ -489,10 +472,6 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) else erase->len = length; - if (!(subdev->flags & MTD_WRITEABLE)) { - err = -EROFS; - break; - } length -= erase->len; if ((err = concat_dev_erase(subdev, erase))) { /* sanity check: should never happen since diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 8d5e103695f..b9b28647ade 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -693,6 +693,8 @@ int mtd_erase(struct mtd_info *mtd, struct erase_info *instr) { if (instr->addr > mtd->size || instr->len > mtd->size - instr->addr) return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; return mtd->_erase(mtd, instr); } EXPORT_SYMBOL_GPL(mtd_erase); @@ -752,10 +754,10 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { *retlen = 0; - if (!mtd->_write) - return -EROFS; if (to < 0 || to > mtd->size || len > mtd->size - to) return -EINVAL; + if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE)) + return -EROFS; return mtd->_write(mtd, to, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_write); @@ -775,6 +777,8 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, return -EOPNOTSUPP; if (to < 0 || to > mtd->size || len > mtd->size - to) return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; return mtd->_panic_write(mtd, to, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_panic_write); @@ -826,6 +830,8 @@ int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs) return -EOPNOTSUPP; if (ofs < 0 || ofs > mtd->size) return -EINVAL; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; return mtd->_block_markbad(mtd, ofs); } EXPORT_SYMBOL_GPL(mtd_block_markbad); @@ -877,6 +883,8 @@ int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { *retlen = 0; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; if (!mtd->_writev) return default_mtd_writev(mtd, vecs, count, to, retlen); return mtd->_writev(mtd, vecs, count, to, retlen); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index fbe2c8a22e1..33d32c6f4f5 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -172,8 +172,6 @@ static int part_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; return mtd_write(part->master, to + part->offset, len, retlen, buf); } @@ -181,8 +179,6 @@ static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; return mtd_panic_write(part->master, to + part->offset, len, retlen, buf); } @@ -192,9 +188,6 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to, { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - if (to >= mtd->size) return -EINVAL; if (ops->datbuf && to + ops->len > mtd->size) @@ -220,8 +213,6 @@ static int part_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen) { struct mtd_part *part = PART(mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; return mtd_writev(part->master, vecs, count, to + part->offset, retlen); } @@ -230,8 +221,7 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mtd_part *part = PART(mtd); int ret; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; + instr->addr += part->offset; ret = mtd_erase(part->master, instr); if (ret) { @@ -304,8 +294,6 @@ static int part_block_markbad(struct mtd_info *mtd, loff_t ofs) struct mtd_part *part = PART(mtd); int res; - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; ofs += part->offset; res = mtd_block_markbad(part->master, ofs); if (!res) diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index b875c2c50d8..90b98822d9a 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -215,10 +215,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, struct gluebi_device *gluebi; gluebi = container_of(mtd, struct gluebi_device, mtd); - - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) @@ -263,12 +259,8 @@ static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr) lnum = mtd_div_by_eb(instr->addr, mtd); count = mtd_div_by_eb(instr->len, mtd); - gluebi = container_of(mtd, struct gluebi_device, mtd); - if (!(mtd->flags & MTD_WRITEABLE)) - return -EROFS; - for (i = 0; i < count - 1; i++) { err = ubi_leb_unmap(gluebi->desc, lnum + i); if (err) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 317a80c4d54..fa20a8f0463 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -268,6 +268,8 @@ static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, ops->retlen = ops->oobretlen = 0; if (!mtd->_write_oob) return -EOPNOTSUPP; + if (!(mtd->flags & MTD_WRITEABLE)) + return -EROFS; return mtd->_write_oob(mtd, to, ops); } -- cgit v1.2.3-70-g09d2 From c3faac4a74c2126e2b68f39d6e8791e88b5f7dbe Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 6 Feb 2012 13:44:27 +0200 Subject: mtd: remove junk pmc551.h This header is tiny and contains only pmc551-private stuff, so it should not live in 'include/linux' - let's just merge it with pmc551.c. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/pmc551.c | 40 +++++++++++++++++++++-- include/linux/mtd/pmc551.h | 77 -------------------------------------------- 2 files changed, 38 insertions(+), 79 deletions(-) delete mode 100644 include/linux/mtd/pmc551.h (limited to 'include/linux') diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index d394e06e427..6269a434f30 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -95,12 +95,48 @@ #include #include #include - #include -#include + +#define PMC551_VERSION \ + "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" + +#define PCI_VENDOR_ID_V3_SEMI 0x11b0 +#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 + +#define PMC551_PCI_MEM_MAP0 0x50 +#define PMC551_PCI_MEM_MAP1 0x54 +#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 +#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 +#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 +#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 + +#define PMC551_SDRAM_MA 0x60 +#define PMC551_SDRAM_CMD 0x62 +#define PMC551_DRAM_CFG 0x64 +#define PMC551_SYS_CTRL_REG 0x78 + +#define PMC551_DRAM_BLK0 0x68 +#define PMC551_DRAM_BLK1 0x6c +#define PMC551_DRAM_BLK2 0x70 +#define PMC551_DRAM_BLK3 0x74 +#define PMC551_DRAM_BLK_GET_SIZE(x) (524288 << ((x >> 4) & 0x0f)) +#define PMC551_DRAM_BLK_SET_COL_MUX(x, v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) +#define PMC551_DRAM_BLK_SET_ROW_MUX(x, v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) + +struct mypriv { + struct pci_dev *dev; + u_char *start; + u32 base_map0; + u32 curr_map0; + u32 asize; + struct mtd_info *nextpmc551; +}; static struct mtd_info *pmc551list; +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); + static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h deleted file mode 100644 index da8b98d1b33..00000000000 --- a/include/linux/mtd/pmc551.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * PMC551 PCI Mezzanine Ram Device - * - * Author: - * Mark Ferrell - * Copyright 1999,2000 Nortel Networks - * - * License: - * As part of this driver was derrived from the slram.c driver it falls - * under the same license, which is GNU General Public License v2 - */ - -#ifndef __MTD_PMC551_H__ -#define __MTD_PMC551_H__ - -#include - -#define PMC551_VERSION \ - "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" - -/* - * Our personal and private information - */ -struct mypriv { - struct pci_dev *dev; - u_char *start; - u32 base_map0; - u32 curr_map0; - u32 asize; - struct mtd_info *nextpmc551; -}; - -/* - * Function Prototypes - */ -static int pmc551_erase(struct mtd_info *, struct erase_info *); -static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, void **virt, resource_size_t *phys); -static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); -static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); - - -/* - * Define the PCI ID's if the kernel doesn't define them for us - */ -#ifndef PCI_VENDOR_ID_V3_SEMI -#define PCI_VENDOR_ID_V3_SEMI 0x11b0 -#endif - -#ifndef PCI_DEVICE_ID_V3_SEMI_V370PDC -#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 -#endif - - -#define PMC551_PCI_MEM_MAP0 0x50 -#define PMC551_PCI_MEM_MAP1 0x54 -#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 -#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 -#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 -#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 - -#define PMC551_SDRAM_MA 0x60 -#define PMC551_SDRAM_CMD 0x62 -#define PMC551_DRAM_CFG 0x64 -#define PMC551_SYS_CTRL_REG 0x78 - -#define PMC551_DRAM_BLK0 0x68 -#define PMC551_DRAM_BLK1 0x6c -#define PMC551_DRAM_BLK2 0x70 -#define PMC551_DRAM_BLK3 0x74 -#define PMC551_DRAM_BLK_GET_SIZE(x) (524288<<((x>>4)&0x0f)) -#define PMC551_DRAM_BLK_SET_COL_MUX(x,v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) -#define PMC551_DRAM_BLK_SET_ROW_MUX(x,v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) - - -#endif /* __MTD_PMC551_H__ */ - -- cgit v1.2.3-70-g09d2 From de3cac9357b5aa9f9f02520e5f2567b06f3f75a7 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 8 Feb 2012 16:37:14 +0200 Subject: mtd: check for zero length in OTP functions This patch changes all the OTP functions like 'mtd_get_fact_prot_info()' and makes them return zero immediately if the input 'len' parameter is 0. This is not really needed currently, but most of the other functions do this, and it is just consistent to do the same in the OTP functions. This patch also moves the OTP functions from the header file to mtdcore.c because they become a bit too big for being inlined. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/mtd.h | 70 ++++++++--------------------------------------- 2 files changed, 84 insertions(+), 59 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 6acc4fb254e..b274fdf5f35 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -802,6 +802,79 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, } EXPORT_SYMBOL_GPL(mtd_panic_write); +/* + * Method to access the protection register area, present in some flash + * devices. The user data is one time programmable but the factory data is read + * only. + */ +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len) +{ + if (!mtd->_get_fact_prot_info) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_get_fact_prot_info(mtd, buf, len); +} +EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info); + +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_read_fact_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg); + +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len) +{ + if (!mtd->_get_user_prot_info) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_get_user_prot_info(mtd, buf, len); +} +EXPORT_SYMBOL_GPL(mtd_get_user_prot_info); + +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_read_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_read_user_prot_reg); + +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf) +{ + *retlen = 0; + if (!mtd->_write_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); +} +EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg); + +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len) +{ + if (!mtd->_lock_user_prot_reg) + return -EOPNOTSUPP; + if (!len) + return 0; + return mtd->_lock_user_prot_reg(mtd, from, len); +} +EXPORT_SYMBOL_GPL(mtd_lock_user_prot_reg); + /* Chip-supported device locking */ int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index fa20a8f0463..726c2d1b258 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -273,65 +273,17 @@ static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, return mtd->_write_oob(mtd, to, ops); } -/* - * Method to access the protection register area, present in some flash - * devices. The user data is one time programmable but the factory data is read - * only. - */ -static inline int mtd_get_fact_prot_info(struct mtd_info *mtd, - struct otp_info *buf, size_t len) -{ - if (!mtd->_get_fact_prot_info) - return -EOPNOTSUPP; - return mtd->_get_fact_prot_info(mtd, buf, len); -} - -static inline int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, - u_char *buf) -{ - *retlen = 0; - if (!mtd->_read_fact_prot_reg) - return -EOPNOTSUPP; - return mtd->_read_fact_prot_reg(mtd, from, len, retlen, buf); -} - -static inline int mtd_get_user_prot_info(struct mtd_info *mtd, - struct otp_info *buf, - size_t len) -{ - if (!mtd->_get_user_prot_info) - return -EOPNOTSUPP; - return mtd->_get_user_prot_info(mtd, buf, len); -} - -static inline int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, - u_char *buf) -{ - *retlen = 0; - if (!mtd->_read_user_prot_reg) - return -EOPNOTSUPP; - return mtd->_read_user_prot_reg(mtd, from, len, retlen, buf); -} - -static inline int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, - size_t len, size_t *retlen, - u_char *buf) -{ - *retlen = 0; - if (!mtd->_write_user_prot_reg) - return -EOPNOTSUPP; - return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf); -} - -static inline int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, - size_t len) -{ - if (!mtd->_lock_user_prot_reg) - return -EOPNOTSUPP; - return mtd->_lock_user_prot_reg(mtd, from, len); -} +int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf, + size_t len); +int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, u_char *buf); +int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); -- cgit v1.2.3-70-g09d2 From 3946860409130038ef6e0e5c50f2203053eae2b7 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Thu, 16 Feb 2012 14:17:32 +0800 Subject: mxs-dma : move the mxs dma.h to a more common place Move the header to a more common place. The mxs dma engine is not only used in mx23/mx28, but also used in mx50/mx6q. It will also be used in the future chips. Rename it to mxs-dma.h, and create a new folder include/linux/fsl/ to store the Freescale's header files. change mxs-dma driver, mxs-mmc driver, gpmi-nand driver, mxs-saif driver to the new header file. Acked-by: Shawn Guo Acked-by: Mark Brown Signed-off-by: Huang Shijie Acked-by: Vinod Koul Acked-by: Chris Ball Signed-off-by: David Woodhouse --- arch/arm/mach-mxs/include/mach/dma.h | 28 ---------------------------- drivers/dma/mxs-dma.c | 2 +- drivers/mmc/host/mxs-mmc.c | 2 +- drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 2 +- include/linux/fsl/mxs-dma.h | 28 ++++++++++++++++++++++++++++ sound/soc/mxs/mxs-pcm.c | 2 +- sound/soc/mxs/mxs-pcm.h | 2 +- sound/soc/mxs/mxs-saif.c | 2 +- 8 files changed, 34 insertions(+), 34 deletions(-) delete mode 100644 arch/arm/mach-mxs/include/mach/dma.h create mode 100644 include/linux/fsl/mxs-dma.h (limited to 'include/linux') diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h deleted file mode 100644 index 203d7c4a3e1..00000000000 --- a/arch/arm/mach-mxs/include/mach/dma.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_DMA_H__ -#define __MACH_MXS_DMA_H__ - -#include - -struct mxs_dma_data { - int chan_irq; -}; - -static inline int mxs_dma_is_apbh(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); -} - -static inline int mxs_dma_is_apbx(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); -} - -#endif /* __MACH_MXS_DMA_H__ */ diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index b06cd4ca626..0afcedbe247 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -22,10 +22,10 @@ #include #include #include +#include #include #include -#include #include /* diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 382c835d217..e5ea2b177e5 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -38,10 +38,10 @@ #include #include #include +#include #include #include -#include #include #define DRIVER_NAME "mxs-mmc" diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index e023bccb778..ec6180d4ff8 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -20,7 +20,7 @@ #include #include #include -#include +#include struct resources { void *gpmi_regs; diff --git a/include/linux/fsl/mxs-dma.h b/include/linux/fsl/mxs-dma.h new file mode 100644 index 00000000000..203d7c4a3e1 --- /dev/null +++ b/include/linux/fsl/mxs-dma.h @@ -0,0 +1,28 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MXS_DMA_H__ +#define __MACH_MXS_DMA_H__ + +#include + +struct mxs_dma_data { + int chan_irq; +}; + +static inline int mxs_dma_is_apbh(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); +} + +static inline int mxs_dma_is_apbx(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); +} + +#endif /* __MACH_MXS_DMA_H__ */ diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index 105f42a394d..420715eb6a1 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -35,7 +36,6 @@ #include #include -#include #include "mxs-pcm.h" static struct snd_pcm_hardware snd_mxs_hardware = { diff --git a/sound/soc/mxs/mxs-pcm.h b/sound/soc/mxs/mxs-pcm.h index f55ac4f7a76..d2c8b12b90c 100644 --- a/sound/soc/mxs/mxs-pcm.h +++ b/sound/soc/mxs/mxs-pcm.h @@ -19,7 +19,7 @@ #ifndef _MXS_PCM_H #define _MXS_PCM_H -#include +#include struct mxs_pcm_dma_params { int chan_irq; diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index f204dbac11d..ce591123d99 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -24,12 +24,12 @@ #include #include #include +#include #include #include #include #include #include -#include #include #include #include -- cgit v1.2.3-70-g09d2 From b6a5588b27f21d74ae35709b56e969d536f1eed0 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Thu, 1 Mar 2012 10:48:35 +0100 Subject: mtd: sh_flctl: Expand FLCMNCR register bit field Add support for a new hardware generation. The meaning of some bits of the FLCMNCR register changed, so some new defines are added parallel to the existing ones to keep backward compatibility. The defines allow to choose an appropriate clocking scheme. Signed-off-by: Bastian Hecht Acked-by: Laurent Pinchart Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/sh_flctl.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 9cf4c4c7955..b66940593c8 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -67,6 +67,30 @@ #define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */ #define TYPESEL_SET (0x1 << 0) +/* + * Clock settings using the PULSEx registers from FLCMNCR + * + * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E + * to control the clock divider used between the High-Speed Peripheral Clock + * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit + * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16 + * bit version the divider is seperate for the pulse width of high and low + * signals. + */ +#define PULSE3 (0x1 << 27) +#define PULSE2 (0x1 << 17) +#define PULSE1 (0x1 << 15) +#define PULSE0 (0x1 << 9) +#define CLK_8B_0_5 PULSE1 +#define CLK_8B_1 0x0 +#define CLK_8B_1_5 (PULSE1 | PULSE2) +#define CLK_8B_2 PULSE0 +#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2) +#define CLK_8B_4 (PULSE0 | PULSE2) +#define CLK_16B_6L_2H PULSE0 +#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2) +#define CLK_16B_12L_4H (PULSE0 | PULSE2) + /* FLCMDCR control bits */ #define ADRCNT2_E (0x1 << 31) /* 5byte address enable */ #define ADRMD_E (0x1 << 26) /* Sector address access */ -- cgit v1.2.3-70-g09d2 From 0b3f0d12eff1ed23496fcf4cf468e1d317516e53 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Thu, 1 Mar 2012 10:48:39 +0100 Subject: mtd: sh_flctl: Use cached register value for FLCMNCR Instead of reading out the register, use a cached value. This will make way for a proper runtime power management implementation. Signed-off-by: Bastian Hecht Acked-by: Laurent Pinchart Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/sh_flctl.c | 22 +++++++--------------- include/linux/mtd/sh_flctl.h | 1 + 2 files changed, 8 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 61e41c065db..48d5da0ec75 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -283,7 +283,7 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset) static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT; + uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT; uint32_t flcmdcr_val, addr_len_bytes = 0; /* Set SNAND bit if page size is 2048byte */ @@ -684,16 +684,15 @@ read_normal_exit: static void flctl_select_chip(struct mtd_info *mtd, int chipnr) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - uint32_t flcmncr_val = readl(FLCMNCR(flctl)); switch (chipnr) { case -1: - flcmncr_val &= ~CE0_ENABLE; - writel(flcmncr_val, FLCMNCR(flctl)); + flctl->flcmncr_base &= ~CE0_ENABLE; + writel(flctl->flcmncr_base, FLCMNCR(flctl)); break; case 0: - flcmncr_val |= CE0_ENABLE; - writel(flcmncr_val, FLCMNCR(flctl)); + flctl->flcmncr_base |= CE0_ENABLE; + writel(flctl->flcmncr_base, FLCMNCR(flctl)); break; default: BUG(); @@ -751,11 +750,6 @@ static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) return 0; } -static void flctl_register_init(struct sh_flctl *flctl, unsigned long val) -{ - writel(val, FLCMNCR(flctl)); -} - static int flctl_chip_init_tail(struct mtd_info *mtd) { struct sh_flctl *flctl = mtd_to_flctl(mtd); @@ -807,8 +801,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) chip->ecc.mode = NAND_ECC_HW; /* 4 symbols ECC enabled */ - writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02, - FLCMNCR(flctl)); + flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02; } else { chip->ecc.mode = NAND_ECC_SOFT; } @@ -854,10 +847,9 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand = &flctl->chip; flctl_mtd->priv = nand; flctl->pdev = pdev; + flctl->flcmncr_base = pdata->flcmncr_val; flctl->hwecc = pdata->has_hwecc; - flctl_register_init(flctl, pdata->flcmncr_val); - nand->options = NAND_NO_AUTOINCR; /* Set address of hardware control function */ diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index b66940593c8..c7082820703 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -132,6 +132,7 @@ struct sh_flctl { int erase1_page_addr; /* page_addr in ERASE1 cmd */ uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */ uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */ + uint32_t flcmncr_base; /* base value of FLCMNCR */ int hwecc_cant_correct[4]; -- cgit v1.2.3-70-g09d2 From 3f2e924b26989bbe1ad600a83fdc72a3056104d1 Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Thu, 1 Mar 2012 10:48:40 +0100 Subject: mtd: sh_flctl: Add FLHOLDCR register Add a register used in new FLCTL hardware and a feature flag for it. Signed-off-by: Bastian Hecht Acked-by: Laurent Pinchart Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/sh_flctl.c | 3 +++ include/linux/mtd/sh_flctl.h | 12 ++++++++++++ 2 files changed, 15 insertions(+) (limited to 'include/linux') diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 48d5da0ec75..d0f1f3c13e7 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -693,6 +693,8 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr) case 0: flctl->flcmncr_base |= CE0_ENABLE; writel(flctl->flcmncr_base, FLCMNCR(flctl)); + if (flctl->holden) + writel(HOLDEN, FLHOLDCR(flctl)); break; default: BUG(); @@ -849,6 +851,7 @@ static int __devinit flctl_probe(struct platform_device *pdev) flctl->pdev = pdev; flctl->flcmncr_base = pdata->flcmncr_val; flctl->hwecc = pdata->has_hwecc; + flctl->holden = pdata->use_holden; nand->options = NAND_NO_AUTOINCR; diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index c7082820703..8bcf299cb9b 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -38,6 +38,7 @@ #define FLDTFIFO(f) (f->reg + 0x24) #define FLECFIFO(f) (f->reg + 0x28) #define FLTRCR(f) (f->reg + 0x2C) +#define FLHOLDCR(f) (f->reg + 0x38) #define FL4ECCRESULT0(f) (f->reg + 0x80) #define FL4ECCRESULT1(f) (f->reg + 0x84) #define FL4ECCRESULT2(f) (f->reg + 0x88) @@ -109,6 +110,15 @@ #define TRSTRT (0x1 << 0) /* translation start */ #define TREND (0x1 << 1) /* translation end */ +/* + * FLHOLDCR control bits + * + * HOLDEN: Bus Occupancy Enable (inverted) + * Enable this bit when the external bus might be used in between transfers. + * If not set and the bus gets used by other modules, a deadlock occurs. + */ +#define HOLDEN (0x1 << 0) + /* FL4ECCCR control bits */ #define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */ #define _4ECCEND (0x1 << 1) /* 4 symbols end */ @@ -138,6 +148,7 @@ struct sh_flctl { unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */ unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ + unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */ }; struct sh_flctl_platform_data { @@ -146,6 +157,7 @@ struct sh_flctl_platform_data { unsigned long flcmncr_val; unsigned has_hwecc:1; + unsigned use_holden:1; }; static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) -- cgit v1.2.3-70-g09d2 From b2acc92e144336dd29e30dc5d26439355be750b6 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Wed, 7 Mar 2012 17:00:51 +0530 Subject: mtd: fsmc: use ALE and CLE offsets from platform data ALE and CLE offsets can be different on different devices. Let devices pass these offsets to the fsmc driver through platform data. Signed-off-by: Shiraz Hashim Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 9 +++++---- include/linux/mtd/fsmc.h | 5 +++++ 2 files changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index abbff77fd10..4dda9bb3833 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -729,27 +729,28 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) goto err_probe1; } - host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE, + host->resaddr = request_mem_region(res->start + pdata->ale_off, resource_size(res), pdev->name); if (!host->resaddr) { ret = -EIO; goto err_probe1; } - host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res)); + host->addr_va = ioremap(res->start + pdata->ale_off, + resource_size(res)); if (!host->addr_va) { ret = -EIO; goto err_probe1; } - host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE, + host->rescmd = request_mem_region(res->start + pdata->cle_off, resource_size(res), pdev->name); if (!host->rescmd) { ret = -EIO; goto err_probe1; } - host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res)); + host->cmd_va = ioremap(res->start + pdata->cle_off, resource_size(res)); if (!host->cmd_va) { ret = -EIO; goto err_probe1; diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index 6987995ad3c..2cd655f06e0 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -151,6 +151,11 @@ struct fsmc_nand_platform_data { unsigned int options; unsigned int width; unsigned int bank; + + /* CLE, ALE offsets */ + unsigned long cle_off; + unsigned long ale_off; + void (*select_bank)(uint32_t bank, uint32_t busw); }; -- cgit v1.2.3-70-g09d2 From 02bfc4ebbd2532440fadd78076f3a51e0ae89f7f Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Wed, 7 Mar 2012 17:00:52 +0530 Subject: mtd: fsmc: Move ALE, CLE defines to their respective platform Address Latch Enable (ALE) and Command Latch Enable (CLE) defines are platform specific and were wrongly put in driver specific fsmc.h file. Move such defines to their respective platform. Also instead of relying on fsmc driver, pass ALE, CLE offsets explicitly from individual platform. Signed-off-by: Shiraz Hashim Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/mach-u300/core.c | 2 ++ arch/arm/mach-u300/include/mach/u300-regs.h | 5 +++++ include/linux/mtd/fsmc.h | 13 ------------- 3 files changed, 7 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b4c6926a700..9c3bafd48cd 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1574,6 +1574,8 @@ static struct fsmc_nand_platform_data nand_platform_data = { .nr_partitions = ARRAY_SIZE(u300_partitions), .options = NAND_SKIP_BBTSCAN, .width = FSMC_NAND_BW8, + .ale_off = PLAT_NAND_ALE, + .cle_off = PLAT_NAND_CLE, }; static struct platform_device nand_device = { diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 035fdc9dbdb..b9701fb86db 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -30,6 +30,11 @@ /* NFIF */ #define U300_NAND_IF_PHYS_BASE 0x9f800000 +/* ALE, CLE offset for FSMC NAND */ +#define PLAT_NAND_CLE (1 << 16) +#define PLAT_NAND_ALE (1 << 17) + + /* AHB Peripherals */ #define U300_AHB_PER_PHYS_BASE 0xa0000000 #define U300_AHB_PER_VIRT_BASE 0xff010000 diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index 2cd655f06e0..e877325d9c5 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -26,19 +26,6 @@ #define FSMC_NAND_BW8 1 #define FSMC_NAND_BW16 2 -/* - * The placement of the Command Latch Enable (CLE) and - * Address Latch Enable (ALE) is twisted around in the - * SPEAR310 implementation. - */ -#if defined(CONFIG_MACH_SPEAR310) -#define PLAT_NAND_CLE (1 << 17) -#define PLAT_NAND_ALE (1 << 16) -#else -#define PLAT_NAND_CLE (1 << 16) -#define PLAT_NAND_ALE (1 << 17) -#endif - #define FSMC_MAX_NOR_BANKS 4 #define FSMC_MAX_NAND_BANKS 4 -- cgit v1.2.3-70-g09d2 From cfe781946dac7f5ff42e23cd7054c75e7201fbdc Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Sun, 18 Mar 2012 15:13:20 +0100 Subject: mtd: sh_flctl: Add power management with QoS request Adds power management code with fine granularity. Every flash control command is enclosed by runtime_put()/get()s. To make sure that no overhead is generated by too frequent power state switches, a quality of service request is issued. Signed-off-by: Bastian Hecht Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/sh_flctl.c | 51 ++++++++++++++++++++++++++++++++++++-------- include/linux/mtd/sh_flctl.h | 3 +++ 2 files changed, 45 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index d0f1f3c13e7..2ee9a1b50a2 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -515,6 +516,8 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, struct sh_flctl *flctl = mtd_to_flctl(mtd); uint32_t read_cmd = 0; + pm_runtime_get_sync(&flctl->pdev->dev); + flctl->read_bytes = 0; if (command != NAND_CMD_PAGEPROG) flctl->index = 0; @@ -670,7 +673,7 @@ static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command, default: break; } - return; + goto runtime_exit; read_normal_exit: writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */ @@ -678,23 +681,47 @@ read_normal_exit: start_translation(flctl); read_fiforeg(flctl, flctl->read_bytes, 0); wait_completion(flctl); +runtime_exit: + pm_runtime_put_sync(&flctl->pdev->dev); return; } static void flctl_select_chip(struct mtd_info *mtd, int chipnr) { struct sh_flctl *flctl = mtd_to_flctl(mtd); + int ret; switch (chipnr) { case -1: flctl->flcmncr_base &= ~CE0_ENABLE; + + pm_runtime_get_sync(&flctl->pdev->dev); writel(flctl->flcmncr_base, FLCMNCR(flctl)); + + if (flctl->qos_request) { + dev_pm_qos_remove_request(&flctl->pm_qos); + flctl->qos_request = 0; + } + + pm_runtime_put_sync(&flctl->pdev->dev); break; case 0: flctl->flcmncr_base |= CE0_ENABLE; - writel(flctl->flcmncr_base, FLCMNCR(flctl)); - if (flctl->holden) + + if (!flctl->qos_request) { + ret = dev_pm_qos_add_request(&flctl->pdev->dev, + &flctl->pm_qos, 100); + if (ret < 0) + dev_err(&flctl->pdev->dev, + "PM QoS request failed: %d\n", ret); + flctl->qos_request = 1; + } + + if (flctl->holden) { + pm_runtime_get_sync(&flctl->pdev->dev); writel(HOLDEN, FLHOLDCR(flctl)); + pm_runtime_put_sync(&flctl->pdev->dev); + } break; default: BUG(); @@ -835,13 +862,13 @@ static int __devinit flctl_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "failed to get I/O memory\n"); - goto err; + goto err_iomap; } flctl->reg = ioremap(res->start, resource_size(res)); if (flctl->reg == NULL) { dev_err(&pdev->dev, "failed to remap I/O memory\n"); - goto err; + goto err_iomap; } platform_set_drvdata(pdev, flctl); @@ -871,23 +898,28 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand->read_word = flctl_read_word; } + pm_runtime_enable(&pdev->dev); + pm_runtime_resume(&pdev->dev); + ret = nand_scan_ident(flctl_mtd, 1, NULL); if (ret) - goto err; + goto err_chip; ret = flctl_chip_init_tail(flctl_mtd); if (ret) - goto err; + goto err_chip; ret = nand_scan_tail(flctl_mtd); if (ret) - goto err; + goto err_chip; mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts); return 0; -err: +err_chip: + pm_runtime_disable(&pdev->dev); +err_iomap: kfree(flctl); return ret; } @@ -897,6 +929,7 @@ static int __devexit flctl_remove(struct platform_device *pdev) struct sh_flctl *flctl = platform_get_drvdata(pdev); nand_release(&flctl->mtd); + pm_runtime_disable(&pdev->dev); kfree(flctl); return 0; diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 8bcf299cb9b..a38e1fa8af0 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -23,6 +23,7 @@ #include #include #include +#include /* FLCTL registers */ #define FLCMNCR(f) (f->reg + 0x0) @@ -131,6 +132,7 @@ struct sh_flctl { struct mtd_info mtd; struct nand_chip chip; struct platform_device *pdev; + struct dev_pm_qos_request pm_qos; void __iomem *reg; uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ @@ -149,6 +151,7 @@ struct sh_flctl { unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */ unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */ + unsigned qos_request:1; /* QoS request to prevent deep power shutdown */ }; struct sh_flctl_platform_data { -- cgit v1.2.3-70-g09d2 From 1d0b95b0834087ba3653f69c24483d63a26d51a7 Mon Sep 17 00:00:00 2001 From: Mike Dunn Date: Sun, 11 Mar 2012 14:21:10 -0700 Subject: mtd: add ecc_strength fields to mtd structs This adds 'ecc_strength' to struct mtd_info. This stores the maximum number of bit errors that can be corrected in one writesize region. For consistency with the nand code, 'strength' is similiarly added to struct nand_ecc_ctrl. This stores the maximum number of bit errors that can be corrected in one ecc step. Signed-off-by: Mike Dunn Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/mtd.h | 3 +++ include/linux/mtd/nand.h | 2 ++ 2 files changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 726c2d1b258..cf5ea8cdcf8 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -164,6 +164,9 @@ struct mtd_info { /* ECC layout structure pointer - read only! */ struct nand_ecclayout *ecclayout; + /* max number of correctible bit errors per writesize */ + unsigned int ecc_strength; + /* Data for variable erase regions. If numeraseregions is zero, * it means that the whole device has erasesize as given above. */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 609868f3db4..1482340d3d9 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -324,6 +324,7 @@ struct nand_hw_control { * @steps: number of ECC steps per page * @size: data bytes per ECC step * @bytes: ECC bytes per step + * @strength: max number of correctible bits per ECC step * @total: total number of ECC bytes per page * @prepad: padding information for syndrome based ECC generators * @postpad: padding information for syndrome based ECC generators @@ -351,6 +352,7 @@ struct nand_ecc_ctrl { int size; int bytes; int total; + int strength; int prepad; int postpad; struct nand_ecclayout *layout; -- cgit v1.2.3-70-g09d2 From e2f6bce8d94d2c82d4f7ae9d94743963a3b10136 Mon Sep 17 00:00:00 2001 From: Vipin Kumar Date: Wed, 14 Mar 2012 11:47:14 +0530 Subject: mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform FSMC controllers provide registers to program the required timing values for attached NAND device. The timing values used until now are relaxed and should work for all devices. Although, for read/write performance improvements, the fsmc nand driver should accept nand timings as a platform data and program the timing parameters into fsmc registers accordingly. This patch implements this modification. Additionally, it programs the default timing parameters if these are not passed via platform data. Signed-off-by: Vipin Kumar Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 41 +++++++++++++++++++++++++++++++++-------- include/linux/mtd/fsmc.h | 34 ++++++++++++++++++++++++++++------ 2 files changed, 61 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index a5099607d20..e7ae63ab59c 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -303,6 +303,8 @@ struct fsmc_nand_data { struct resource *resaddr; struct resource *resdata; + struct fsmc_nand_timings *dev_timings; + void __iomem *data_va; void __iomem *cmd_va; void __iomem *addr_va; @@ -383,21 +385,41 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) * FSMC registers */ static void fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank, - uint32_t busw) + uint32_t busw, struct fsmc_nand_timings *timings) { uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON; + uint32_t tclr, tar, thiz, thold, twait, tset; + struct fsmc_nand_timings *tims; + struct fsmc_nand_timings default_timings = { + .tclr = FSMC_TCLR_1, + .tar = FSMC_TAR_1, + .thiz = FSMC_THIZ_1, + .thold = FSMC_THOLD_4, + .twait = FSMC_TWAIT_6, + .tset = FSMC_TSET_0, + }; + + if (timings) + tims = timings; + else + tims = &default_timings; + + tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT; + tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT; + thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT; + thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT; + twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT; + tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT; if (busw) writel(value | FSMC_DEVWID_16, ®s->bank_regs[bank].pc); else writel(value | FSMC_DEVWID_8, ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1, + writel(readl(®s->bank_regs[bank].pc) | tclr | tar, ®s->bank_regs[bank].pc); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - ®s->bank_regs[bank].comm); - writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0, - ®s->bank_regs[bank].attrib); + writel(thiz | thold | twait | tset, ®s->bank_regs[bank].comm); + writel(thiz | thold | twait | tset, ®s->bank_regs[bank].attrib); } /* @@ -783,6 +805,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) host->select_chip = pdata->select_bank; host->partitions = pdata->partitions; host->nr_partitions = pdata->nr_partitions; + host->dev_timings = pdata->nand_timings; regs = host->regs_va; /* Link all private pointers */ @@ -807,7 +830,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (pdata->width == FSMC_NAND_BW16) nand->options |= NAND_BUSWIDTH_16; - fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16); + fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16, + host->dev_timings); if (AMBA_REV_BITS(host->pid) >= 8) { nand->ecc.read_page = fsmc_read_page_hwecc; @@ -979,7 +1003,8 @@ static int fsmc_nand_resume(struct device *dev) if (host) { clk_enable(host->clk); fsmc_nand_setup(host->regs_va, host->bank, - host->nand.options & NAND_BUSWIDTH_16); + host->nand.options & NAND_BUSWIDTH_16, + host->dev_timings); } return 0; } diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index e877325d9c5..c4ac07a1969 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -90,17 +90,29 @@ struct fsmc_regs { #define FSMC_ECCEN (1 << 6) #define FSMC_ECCPLEN_512 (0 << 7) #define FSMC_ECCPLEN_256 (1 << 7) -#define FSMC_TCLR_1 (1 << 9) -#define FSMC_TAR_1 (1 << 13) +#define FSMC_TCLR_1 (1) +#define FSMC_TCLR_SHIFT (9) +#define FSMC_TCLR_MASK (0xF) +#define FSMC_TAR_1 (1) +#define FSMC_TAR_SHIFT (13) +#define FSMC_TAR_MASK (0xF) /* sts register definitions */ #define FSMC_CODE_RDY (1 << 15) /* comm register definitions */ -#define FSMC_TSET_0 (0 << 0) -#define FSMC_TWAIT_6 (6 << 8) -#define FSMC_THOLD_4 (4 << 16) -#define FSMC_THIZ_1 (1 << 24) +#define FSMC_TSET_0 0 +#define FSMC_TSET_SHIFT 0 +#define FSMC_TSET_MASK 0xFF +#define FSMC_TWAIT_6 6 +#define FSMC_TWAIT_SHIFT 8 +#define FSMC_TWAIT_MASK 0xFF +#define FSMC_THOLD_4 4 +#define FSMC_THOLD_SHIFT 16 +#define FSMC_THOLD_MASK 0xFF +#define FSMC_THIZ_1 1 +#define FSMC_THIZ_SHIFT 24 +#define FSMC_THIZ_MASK 0xFF /* * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 @@ -120,6 +132,15 @@ struct fsmc_eccplace { struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; }; +struct fsmc_nand_timings { + uint8_t tclr; + uint8_t tar; + uint8_t thiz; + uint8_t thold; + uint8_t twait; + uint8_t tset; +}; + /** * fsmc_nand_platform_data - platform specific NAND controller config * @partitions: partition table for the platform, use a default fallback @@ -133,6 +154,7 @@ struct fsmc_eccplace { * this may be set to NULL */ struct fsmc_nand_platform_data { + struct fsmc_nand_timings *nand_timings; struct mtd_partition *partitions; unsigned int nr_partitions; unsigned int options; -- cgit v1.2.3-70-g09d2 From 604e75444fa82cfdcba339e3bd4da1dfd6947539 Mon Sep 17 00:00:00 2001 From: Vipin Kumar Date: Wed, 14 Mar 2012 11:47:17 +0530 Subject: mtd: nand/fsmc: Access the NAND device word by word whenever possible The default way of accessing nand device is using the nand width. This means that 8bit devices are using u8 * and 16bit devices are accessed using u16 *. This results in a non-optimal performance since the FSMC is designed to translate the normal word accesses into device width based accesses. This patch implements read_buf and write_buf callbacks using word by word accesses. Signed-off-by: Vipin Kumar Reviewed-by: Viresh Kumar Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 55 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/fsmc.h | 6 +++++ 2 files changed, 61 insertions(+) (limited to 'include/linux') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index c41f45faa09..81fc8e6b8cb 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -523,6 +523,52 @@ static int count_written_bits(uint8_t *buff, int size, int max_bits) return written_bits; } +/* + * fsmc_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *chip = mtd->priv; + + if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && + IS_ALIGNED(len, sizeof(uint32_t))) { + uint32_t *p = (uint32_t *)buf; + len = len >> 2; + for (i = 0; i < len; i++) + writel(p[i], chip->IO_ADDR_W); + } else { + for (i = 0; i < len; i++) + writeb(buf[i], chip->IO_ADDR_W); + } +} + +/* + * fsmc_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *chip = mtd->priv; + + if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) && + IS_ALIGNED(len, sizeof(uint32_t))) { + uint32_t *p = (uint32_t *)buf; + len = len >> 2; + for (i = 0; i < len; i++) + p[i] = readl(chip->IO_ADDR_R); + } else { + for (i = 0; i < len; i++) + buf[i] = readb(chip->IO_ADDR_R); + } +} + /* * fsmc_read_page_hwecc * @mtd: mtd info structure @@ -825,6 +871,15 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (pdata->width == FSMC_NAND_BW16) nand->options |= NAND_BUSWIDTH_16; + /* + * use customized (word by word) version of read_buf, write_buf if + * access_with_dev_width is reset supported + */ + if (pdata->mode == USE_WORD_ACCESS) { + nand->read_buf = fsmc_read_buf; + nand->write_buf = fsmc_write_buf; + } + fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16, host->dev_timings); diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index c4ac07a1969..1edd2b3ac38 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -141,6 +141,11 @@ struct fsmc_nand_timings { uint8_t tset; }; +enum access_mode { + USE_DMA_ACCESS = 1, + USE_WORD_ACCESS, +}; + /** * fsmc_nand_platform_data - platform specific NAND controller config * @partitions: partition table for the platform, use a default fallback @@ -164,6 +169,7 @@ struct fsmc_nand_platform_data { /* CLE, ALE offsets */ unsigned long cle_off; unsigned long ale_off; + enum access_mode mode; void (*select_bank)(uint32_t bank, uint32_t busw); }; -- cgit v1.2.3-70-g09d2 From 4774fb0a48aacfec206e6d54ecf58706f6a5320a Mon Sep 17 00:00:00 2001 From: Vipin Kumar Date: Wed, 14 Mar 2012 11:47:18 +0530 Subject: mtd: nand/fsmc: Add DMA support The fsmc_nand driver uses cpu to read/write onto the device. This is inefficient because of two reasons - the cpu gets locked on AHB bus while reading from NAND - the cpu is unnecessarily used when dma can do the job This patch adds the support for accessing the device through DMA Signed-off-by: Vipin Kumar Reviewed-by: Viresh Kumar Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 168 +++++++++++++++++++++++++++++++++++++++++-- include/linux/mtd/fsmc.h | 4 ++ 2 files changed, 167 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 81fc8e6b8cb..d20a0c63251 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -17,6 +17,10 @@ */ #include +#include +#include +#include +#include #include #include #include @@ -282,6 +286,11 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = { * @bank: Bank number for probed device. * @clk: Clock structure for FSMC. * + * @read_dma_chan: DMA channel for read access + * @write_dma_chan: DMA channel for write access to NAND + * @dma_access_complete: Completion structure + * + * @data_pa: NAND Physical port for Data. * @data_va: NAND port for Data. * @cmd_va: NAND port for Command. * @addr_va: NAND port for Address. @@ -297,10 +306,17 @@ struct fsmc_nand_data { struct fsmc_eccplace *ecc_place; unsigned int bank; struct device *dev; + enum access_mode mode; struct clk *clk; + /* DMA related objects */ + struct dma_chan *read_dma_chan; + struct dma_chan *write_dma_chan; + struct completion dma_access_complete; + struct fsmc_nand_timings *dev_timings; + dma_addr_t data_pa; void __iomem *data_va; void __iomem *cmd_va; void __iomem *addr_va; @@ -523,6 +539,77 @@ static int count_written_bits(uint8_t *buff, int size, int max_bits) return written_bits; } +static void dma_complete(void *param) +{ + struct fsmc_nand_data *host = param; + + complete(&host->dma_access_complete); +} + +static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len, + enum dma_data_direction direction) +{ + struct dma_chan *chan; + struct dma_device *dma_dev; + struct dma_async_tx_descriptor *tx; + dma_addr_t dma_dst, dma_src, dma_addr; + dma_cookie_t cookie; + unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + int ret; + + if (direction == DMA_TO_DEVICE) + chan = host->write_dma_chan; + else if (direction == DMA_FROM_DEVICE) + chan = host->read_dma_chan; + else + return -EINVAL; + + dma_dev = chan->device; + dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction); + + if (direction == DMA_TO_DEVICE) { + dma_src = dma_addr; + dma_dst = host->data_pa; + flags |= DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_SKIP_DEST_UNMAP; + } else { + dma_src = host->data_pa; + dma_dst = dma_addr; + flags |= DMA_COMPL_DEST_UNMAP_SINGLE | DMA_COMPL_SKIP_SRC_UNMAP; + } + + tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src, + len, flags); + + if (!tx) { + dev_err(host->dev, "device_prep_dma_memcpy error\n"); + dma_unmap_single(dma_dev->dev, dma_addr, len, direction); + return -EIO; + } + + tx->callback = dma_complete; + tx->callback_param = host; + cookie = tx->tx_submit(tx); + + ret = dma_submit_error(cookie); + if (ret) { + dev_err(host->dev, "dma_submit_error %d\n", cookie); + return ret; + } + + dma_async_issue_pending(chan); + + ret = + wait_for_completion_interruptible_timeout(&host->dma_access_complete, + msecs_to_jiffies(3000)); + if (ret <= 0) { + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dev_err(host->dev, "wait_for_completion_timeout\n"); + return ret ? ret : -ETIMEDOUT; + } + + return 0; +} + /* * fsmc_write_buf - write buffer to chip * @mtd: MTD device structure @@ -569,6 +656,35 @@ static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) } } +/* + * fsmc_read_buf_dma - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct fsmc_nand_data *host; + + host = container_of(mtd, struct fsmc_nand_data, mtd); + dma_xfer(host, buf, len, DMA_FROM_DEVICE); +} + +/* + * fsmc_write_buf_dma - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct fsmc_nand_data *host; + + host = container_of(mtd, struct fsmc_nand_data, mtd); + dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE); +} + /* * fsmc_read_page_hwecc * @mtd: mtd info structure @@ -731,6 +847,12 @@ static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat, return i; } +static bool filter(struct dma_chan *chan, void *slave) +{ + chan->private = slave; + return true; +} + /* * fsmc_nand_probe - Probe function * @pdev: platform device structure @@ -743,6 +865,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) struct nand_chip *nand; struct fsmc_regs *regs; struct resource *res; + dma_cap_mask_t mask; int ret = 0; u32 pid; int i; @@ -769,6 +892,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) return -ENOENT; } + host->data_pa = (dma_addr_t)res->start; host->data_va = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!host->data_va) { @@ -847,6 +971,11 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) host->nr_partitions = pdata->nr_partitions; host->dev = &pdev->dev; host->dev_timings = pdata->nand_timings; + host->mode = pdata->mode; + + if (host->mode == USE_DMA_ACCESS) + init_completion(&host->dma_access_complete); + regs = host->regs_va; /* Link all private pointers */ @@ -871,13 +1000,31 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (pdata->width == FSMC_NAND_BW16) nand->options |= NAND_BUSWIDTH_16; - /* - * use customized (word by word) version of read_buf, write_buf if - * access_with_dev_width is reset supported - */ - if (pdata->mode == USE_WORD_ACCESS) { + switch (host->mode) { + case USE_DMA_ACCESS: + dma_cap_zero(mask); + dma_cap_set(DMA_MEMCPY, mask); + host->read_dma_chan = dma_request_channel(mask, filter, + pdata->read_dma_priv); + if (!host->read_dma_chan) { + dev_err(&pdev->dev, "Unable to get read dma channel\n"); + goto err_req_read_chnl; + } + host->write_dma_chan = dma_request_channel(mask, filter, + pdata->write_dma_priv); + if (!host->write_dma_chan) { + dev_err(&pdev->dev, "Unable to get write dma channel\n"); + goto err_req_write_chnl; + } + nand->read_buf = fsmc_read_buf_dma; + nand->write_buf = fsmc_write_buf_dma; + break; + + default: + case USE_WORD_ACCESS: nand->read_buf = fsmc_read_buf; nand->write_buf = fsmc_write_buf; + break; } fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16, @@ -978,6 +1125,12 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) err_probe: err_scan_ident: + if (host->mode == USE_DMA_ACCESS) + dma_release_channel(host->write_dma_chan); +err_req_write_chnl: + if (host->mode == USE_DMA_ACCESS) + dma_release_channel(host->read_dma_chan); +err_req_read_chnl: clk_disable(host->clk); err_clk_enable: clk_put(host->clk); @@ -995,6 +1148,11 @@ static int fsmc_nand_remove(struct platform_device *pdev) if (host) { nand_release(&host->mtd); + + if (host->mode == USE_DMA_ACCESS) { + dma_release_channel(host->write_dma_chan); + dma_release_channel(host->read_dma_chan); + } clk_disable(host->clk); clk_put(host->clk); } diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index 1edd2b3ac38..18f9127a663 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -172,6 +172,10 @@ struct fsmc_nand_platform_data { enum access_mode mode; void (*select_bank)(uint32_t bank, uint32_t busw); + + /* priv structures for dma accesses */ + void *read_dma_priv; + void *write_dma_priv; }; extern int __init fsmc_nor_init(struct platform_device *pdev, -- cgit v1.2.3-70-g09d2 From 2a5dbead29a7c081a47133eb428440147a6d8d5a Mon Sep 17 00:00:00 2001 From: Vipin Kumar Date: Wed, 14 Mar 2012 11:47:19 +0530 Subject: mtd: nand/fsmc: Remove sparse warnings and errors This patch removes the sparse below warnings and errors for nand/fsmc driver /root/vipin/spear/kernel/3.3/linux-3.3/drivers/mtd/nand/fsmc_nand.c:363:31: warning: incorrect type in initializer (different address spaces) /root/vipin/spear/kernel/3.3/linux-3.3/drivers/mtd/nand/fsmc_nand.c:363:31: expected struct fsmc_regs *regs /root/vipin/spear/kernel/3.3/linux-3.3/drivers/mtd/nand/fsmc_nand.c:363:31: got void [noderef] *regs_va [...] Signed-off-by: Vipin Kumar Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 91 ++++++++++++++------------- include/linux/mtd/fsmc.h | 143 ++++++++++++++++++++----------------------- 2 files changed, 111 insertions(+), 123 deletions(-) (limited to 'include/linux') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index d20a0c63251..04901821309 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -360,28 +360,29 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) struct nand_chip *this = mtd->priv; struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void *__iomem *regs = host->regs_va; unsigned int bank = host->bank; if (ctrl & NAND_CTRL_CHANGE) { + u32 pc; + if (ctrl & NAND_CLE) { - this->IO_ADDR_R = (void __iomem *)host->cmd_va; - this->IO_ADDR_W = (void __iomem *)host->cmd_va; + this->IO_ADDR_R = host->cmd_va; + this->IO_ADDR_W = host->cmd_va; } else if (ctrl & NAND_ALE) { - this->IO_ADDR_R = (void __iomem *)host->addr_va; - this->IO_ADDR_W = (void __iomem *)host->addr_va; + this->IO_ADDR_R = host->addr_va; + this->IO_ADDR_W = host->addr_va; } else { - this->IO_ADDR_R = (void __iomem *)host->data_va; - this->IO_ADDR_W = (void __iomem *)host->data_va; + this->IO_ADDR_R = host->data_va; + this->IO_ADDR_W = host->data_va; } - if (ctrl & NAND_NCE) { - writel(readl(®s->bank_regs[bank].pc) | FSMC_ENABLE, - ®s->bank_regs[bank].pc); - } else { - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ENABLE, - ®s->bank_regs[bank].pc); - } + pc = readl(FSMC_NAND_REG(regs, bank, PC)); + if (ctrl & NAND_NCE) + pc |= FSMC_ENABLE; + else + pc &= ~FSMC_ENABLE; + writel(pc, FSMC_NAND_REG(regs, bank, PC)); } mb(); @@ -396,7 +397,7 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) * This routine initializes timing parameters related to NAND memory access in * FSMC registers */ -static void fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank, +static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, uint32_t busw, struct fsmc_nand_timings *timings) { uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON; @@ -424,14 +425,14 @@ static void fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank, tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT; if (busw) - writel(value | FSMC_DEVWID_16, ®s->bank_regs[bank].pc); + writel(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC)); else - writel(value | FSMC_DEVWID_8, ®s->bank_regs[bank].pc); + writel(value | FSMC_DEVWID_8, FSMC_NAND_REG(regs, bank, PC)); - writel(readl(®s->bank_regs[bank].pc) | tclr | tar, - ®s->bank_regs[bank].pc); - writel(thiz | thold | twait | tset, ®s->bank_regs[bank].comm); - writel(thiz | thold | twait | tset, ®s->bank_regs[bank].attrib); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar, + FSMC_NAND_REG(regs, bank, PC)); + writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, COMM)); + writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, ATTRIB)); } /* @@ -441,15 +442,15 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode) { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256, - ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCEN, - ®s->bank_regs[bank].pc); - writel(readl(®s->bank_regs[bank].pc) | FSMC_ECCEN, - ®s->bank_regs[bank].pc); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256, + FSMC_NAND_REG(regs, bank, PC)); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN, + FSMC_NAND_REG(regs, bank, PC)); + writel(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN, + FSMC_NAND_REG(regs, bank, PC)); } /* @@ -462,13 +463,13 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT; do { - if (readl(®s->bank_regs[bank].sts) & FSMC_CODE_RDY) + if (readl(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY) break; else cond_resched(); @@ -479,25 +480,25 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data, return -ETIMEDOUT; } - ecc_tmp = readl(®s->bank_regs[bank].ecc1); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); ecc[3] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].ecc2); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC2)); ecc[4] = (uint8_t) (ecc_tmp >> 0); ecc[5] = (uint8_t) (ecc_tmp >> 8); ecc[6] = (uint8_t) (ecc_tmp >> 16); ecc[7] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].ecc3); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC3)); ecc[8] = (uint8_t) (ecc_tmp >> 0); ecc[9] = (uint8_t) (ecc_tmp >> 8); ecc[10] = (uint8_t) (ecc_tmp >> 16); ecc[11] = (uint8_t) (ecc_tmp >> 24); - ecc_tmp = readl(®s->bank_regs[bank].sts); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, STS)); ecc[12] = (uint8_t) (ecc_tmp >> 16); return 0; @@ -513,11 +514,11 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data, { struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; uint32_t bank = host->bank; uint32_t ecc_tmp; - ecc_tmp = readl(®s->bank_regs[bank].ecc1); + ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1)); ecc[0] = (uint8_t) (ecc_tmp >> 0); ecc[1] = (uint8_t) (ecc_tmp >> 8); ecc[2] = (uint8_t) (ecc_tmp >> 16); @@ -771,13 +772,13 @@ static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat, struct fsmc_nand_data *host = container_of(mtd, struct fsmc_nand_data, mtd); struct nand_chip *chip = mtd->priv; - struct fsmc_regs *regs = host->regs_va; + void __iomem *regs = host->regs_va; unsigned int bank = host->bank; uint32_t err_idx[8]; uint32_t num_err, i; uint32_t ecc1, ecc2, ecc3, ecc4; - num_err = (readl(®s->bank_regs[bank].sts) >> 10) & 0xF; + num_err = (readl(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF; /* no bit flipping */ if (likely(num_err == 0)) @@ -820,10 +821,10 @@ static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat, * uint64_t array and error offset indexes are populated in err_idx * array */ - ecc1 = readl(®s->bank_regs[bank].ecc1); - ecc2 = readl(®s->bank_regs[bank].ecc2); - ecc3 = readl(®s->bank_regs[bank].ecc3); - ecc4 = readl(®s->bank_regs[bank].sts); + ecc1 = readl(FSMC_NAND_REG(regs, bank, ECC1)); + ecc2 = readl(FSMC_NAND_REG(regs, bank, ECC2)); + ecc3 = readl(FSMC_NAND_REG(regs, bank, ECC3)); + ecc4 = readl(FSMC_NAND_REG(regs, bank, STS)); err_idx[0] = (ecc1 >> 0) & 0x1FFF; err_idx[1] = (ecc1 >> 13) & 0x1FFF; @@ -863,7 +864,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; - struct fsmc_regs *regs; struct resource *res; dma_cap_mask_t mask; int ret = 0; @@ -976,8 +976,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (host->mode == USE_DMA_ACCESS) init_completion(&host->dma_access_complete); - regs = host->regs_va; - /* Link all private pointers */ mtd = &host->mtd; nand = &host->nand; @@ -1027,7 +1025,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) break; } - fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16, + fsmc_nand_setup(host->regs_va, host->bank, + nand->options & NAND_BUSWIDTH_16, host->dev_timings); if (AMBA_REV_BITS(host->pid) >= 8) { diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index 18f9127a663..823359c0f5a 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -32,88 +32,77 @@ #define FSMC_FLASH_WIDTH8 1 #define FSMC_FLASH_WIDTH16 2 -struct fsmc_nor_bank_regs { - uint32_t ctrl; - uint32_t ctrl_tim; -}; - -/* ctrl register definitions */ -#define BANK_ENABLE (1 << 0) -#define MUXED (1 << 1) -#define NOR_DEV (2 << 2) -#define WIDTH_8 (0 << 4) -#define WIDTH_16 (1 << 4) -#define RSTPWRDWN (1 << 6) -#define WPROT (1 << 7) -#define WRT_ENABLE (1 << 12) -#define WAIT_ENB (1 << 13) - -/* ctrl_tim register definitions */ - -struct fsmc_nand_bank_regs { - uint32_t pc; - uint32_t sts; - uint32_t comm; - uint32_t attrib; - uint32_t ioata; - uint32_t ecc1; - uint32_t ecc2; - uint32_t ecc3; -}; - +/* fsmc controller registers for NOR flash */ +#define CTRL 0x0 + /* ctrl register definitions */ + #define BANK_ENABLE (1 << 0) + #define MUXED (1 << 1) + #define NOR_DEV (2 << 2) + #define WIDTH_8 (0 << 4) + #define WIDTH_16 (1 << 4) + #define RSTPWRDWN (1 << 6) + #define WPROT (1 << 7) + #define WRT_ENABLE (1 << 12) + #define WAIT_ENB (1 << 13) + +#define CTRL_TIM 0x4 + /* ctrl_tim register definitions */ + +#define FSMC_NOR_BANK_SZ 0x8 #define FSMC_NOR_REG_SIZE 0x40 -struct fsmc_regs { - struct fsmc_nor_bank_regs nor_bank_regs[FSMC_MAX_NOR_BANKS]; - uint8_t reserved_1[0x40 - 0x20]; - struct fsmc_nand_bank_regs bank_regs[FSMC_MAX_NAND_BANKS]; - uint8_t reserved_2[0xfe0 - 0xc0]; - uint32_t peripid0; /* 0xfe0 */ - uint32_t peripid1; /* 0xfe4 */ - uint32_t peripid2; /* 0xfe8 */ - uint32_t peripid3; /* 0xfec */ - uint32_t pcellid0; /* 0xff0 */ - uint32_t pcellid1; /* 0xff4 */ - uint32_t pcellid2; /* 0xff8 */ - uint32_t pcellid3; /* 0xffc */ -}; +#define FSMC_NOR_REG(base, bank, reg) (base + \ + FSMC_NOR_BANK_SZ * (bank) + \ + reg) + +/* fsmc controller registers for NAND flash */ +#define PC 0x00 + /* pc register definitions */ + #define FSMC_RESET (1 << 0) + #define FSMC_WAITON (1 << 1) + #define FSMC_ENABLE (1 << 2) + #define FSMC_DEVTYPE_NAND (1 << 3) + #define FSMC_DEVWID_8 (0 << 4) + #define FSMC_DEVWID_16 (1 << 4) + #define FSMC_ECCEN (1 << 6) + #define FSMC_ECCPLEN_512 (0 << 7) + #define FSMC_ECCPLEN_256 (1 << 7) + #define FSMC_TCLR_1 (1) + #define FSMC_TCLR_SHIFT (9) + #define FSMC_TCLR_MASK (0xF) + #define FSMC_TAR_1 (1) + #define FSMC_TAR_SHIFT (13) + #define FSMC_TAR_MASK (0xF) +#define STS 0x04 + /* sts register definitions */ + #define FSMC_CODE_RDY (1 << 15) +#define COMM 0x08 + /* comm register definitions */ + #define FSMC_TSET_0 0 + #define FSMC_TSET_SHIFT 0 + #define FSMC_TSET_MASK 0xFF + #define FSMC_TWAIT_6 6 + #define FSMC_TWAIT_SHIFT 8 + #define FSMC_TWAIT_MASK 0xFF + #define FSMC_THOLD_4 4 + #define FSMC_THOLD_SHIFT 16 + #define FSMC_THOLD_MASK 0xFF + #define FSMC_THIZ_1 1 + #define FSMC_THIZ_SHIFT 24 + #define FSMC_THIZ_MASK 0xFF +#define ATTRIB 0x0C +#define IOATA 0x10 +#define ECC1 0x14 +#define ECC2 0x18 +#define ECC3 0x1C +#define FSMC_NAND_BANK_SZ 0x20 + +#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \ + (FSMC_NAND_BANK_SZ * (bank)) + \ + reg) #define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) -/* pc register definitions */ -#define FSMC_RESET (1 << 0) -#define FSMC_WAITON (1 << 1) -#define FSMC_ENABLE (1 << 2) -#define FSMC_DEVTYPE_NAND (1 << 3) -#define FSMC_DEVWID_8 (0 << 4) -#define FSMC_DEVWID_16 (1 << 4) -#define FSMC_ECCEN (1 << 6) -#define FSMC_ECCPLEN_512 (0 << 7) -#define FSMC_ECCPLEN_256 (1 << 7) -#define FSMC_TCLR_1 (1) -#define FSMC_TCLR_SHIFT (9) -#define FSMC_TCLR_MASK (0xF) -#define FSMC_TAR_1 (1) -#define FSMC_TAR_SHIFT (13) -#define FSMC_TAR_MASK (0xF) - -/* sts register definitions */ -#define FSMC_CODE_RDY (1 << 15) - -/* comm register definitions */ -#define FSMC_TSET_0 0 -#define FSMC_TSET_SHIFT 0 -#define FSMC_TSET_MASK 0xFF -#define FSMC_TWAIT_6 6 -#define FSMC_TWAIT_SHIFT 8 -#define FSMC_TWAIT_MASK 0xFF -#define FSMC_THOLD_4 4 -#define FSMC_THOLD_SHIFT 16 -#define FSMC_THOLD_MASK 0xFF -#define FSMC_THIZ_1 1 -#define FSMC_THIZ_SHIFT 24 -#define FSMC_THIZ_MASK 0xFF - /* * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 * and it has to be read consecutively and immediately after the 512 -- cgit v1.2.3-70-g09d2 From eea628199d5b12429c47db17035a954b0062e554 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 16 Mar 2012 10:19:31 +0100 Subject: mtd: Add device-tree support to fsmc_nand This patch adds support to configure the FSMC NAND driver (used amongst others on SPEAr platforms) via device-tree instead of platform_data. Signed-off-by: Stefan Roese Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- .../devicetree/bindings/mtd/fsmc-nand.txt | 33 +++++++++++++ drivers/mtd/nand/fsmc_nand.c | 57 +++++++++++++++++++++- include/linux/mtd/fsmc.h | 4 +- 3 files changed, 91 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/fsmc-nand.txt (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt new file mode 100644 index 00000000000..e2c663b354d --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt @@ -0,0 +1,33 @@ +* FSMC NAND + +Required properties: +- compatible : "st,spear600-fsmc-nand" +- reg : Address range of the mtd chip +- reg-names: Should contain the reg names "fsmc_regs" and "nand_data" +- st,ale-off : Chip specific offset to ALE +- st,cle-off : Chip specific offset to CLE + +Optional properties: +- bank-width : Width (in bytes) of the device. If not present, the width + defaults to 1 byte +- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped + +Example: + + fsmc: flash@d1800000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd1800000 0x1000 /* FSMC Register */ + 0xd2000000 0x4000>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + + bank-width = <1>; + nand-skip-bbtscan; + + partition@0 { + ... + }; + }; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 04901821309..1b8330e1155 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -854,6 +855,38 @@ static bool filter(struct dma_chan *chan, void *slave) return true; } +#ifdef CONFIG_OF +static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + u32 val; + + /* Set default NAND width to 8 bits */ + pdata->width = 8; + if (!of_property_read_u32(np, "bank-width", &val)) { + if (val == 2) { + pdata->width = 16; + } else if (val != 1) { + dev_err(&pdev->dev, "invalid bank-width %u\n", val); + return -EINVAL; + } + } + of_property_read_u32(np, "st,ale-off", &pdata->ale_off); + of_property_read_u32(np, "st,cle-off", &pdata->cle_off); + if (of_get_property(np, "nand-skip-bbtscan", NULL)) + pdata->options = NAND_SKIP_BBTSCAN; + + return 0; +} +#else +static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + /* * fsmc_nand_probe - Probe function * @pdev: platform device structure @@ -861,6 +894,8 @@ static bool filter(struct dma_chan *chan, void *slave) static int __init fsmc_nand_probe(struct platform_device *pdev) { struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node __maybe_unused *np = pdev->dev.of_node; + struct mtd_part_parser_data ppdata = {}; struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; @@ -870,6 +905,16 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) u32 pid; int i; + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + pdev->dev.platform_data = pdata; + ret = fsmc_nand_probe_config_dt(pdev, np); + if (ret) { + dev_err(&pdev->dev, "no platform data\n"); + return -ENODEV; + } + } + if (!pdata) { dev_err(&pdev->dev, "platform data is NULL\n"); return -EINVAL; @@ -1113,7 +1158,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * Check for partition info passed */ host->mtd.name = "nand"; - ret = mtd_device_parse_register(&host->mtd, NULL, NULL, + ppdata.of_node = np; + ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata, host->partitions, host->nr_partitions); if (ret) goto err_probe; @@ -1183,11 +1229,20 @@ static int fsmc_nand_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume); #endif +#ifdef CONFIG_OF +static const struct of_device_id fsmc_nand_id_table[] = { + { .compatible = "st,spear600-fsmc-nand" }, + {} +}; +MODULE_DEVICE_TABLE(of, fsmc_nand_id_table); +#endif + static struct platform_driver fsmc_nand_driver = { .remove = fsmc_nand_remove, .driver = { .owner = THIS_MODULE, .name = "fsmc-nand", + .of_match_table = of_match_ptr(fsmc_nand_id_table), #ifdef CONFIG_PM .pm = &fsmc_nand_pm_ops, #endif diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index 823359c0f5a..b20029221fb 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -156,8 +156,8 @@ struct fsmc_nand_platform_data { unsigned int bank; /* CLE, ALE offsets */ - unsigned long cle_off; - unsigned long ale_off; + unsigned int cle_off; + unsigned int ale_off; enum access_mode mode; void (*select_bank)(uint32_t bank, uint32_t busw); -- cgit v1.2.3-70-g09d2 From 6551ab5d30d6bf0cea0c6cb294686ce3c7fc6042 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 16 Mar 2012 11:42:11 +0100 Subject: mtd: add device-tree support to spear_smi This patch adds support to configure the SPEAr SMI driver via device-tree instead of platform_data. Signed-off-by: Stefan Roese Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- .../devicetree/bindings/mtd/spear_smi.txt | 31 ++++++ drivers/mtd/devices/spear_smi.c | 111 ++++++++++++++++++--- include/linux/mtd/spear_smi.h | 5 + 3 files changed, 135 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/spear_smi.txt (limited to 'include/linux') diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt new file mode 100644 index 00000000000..7248aadd89e --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt @@ -0,0 +1,31 @@ +* SPEAr SMI + +Required properties: +- compatible : "st,spear600-smi" +- reg : Address range of the mtd chip +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the STMMAC interrupts +- clock-rate : Functional clock rate of SMI in Hz + +Optional properties: +- st,smi-fast-mode : Flash supports read in fast mode + +Example: + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + clock-rate = <50000000>; /* 50MHz */ + + flash@f8000000 { + st,smi-fast-mode; + ... + }; + }; diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index f7f34fd1a3e..797d43cd355 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -33,9 +33,8 @@ #include #include #include - -/* max possible slots for serial-nor flash chip in the SMI controller */ -#define MAX_NUM_FLASH_CHIP 4 +#include +#include /* SMI clock rate */ #define SMI_MAX_CLOCK_FREQ 50000000 /* 50 MHz */ @@ -748,9 +747,63 @@ err_probe: return ret; } -static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) + +#ifdef CONFIG_OF +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *pp = NULL; + const __be32 *addr; + u32 val; + int len; + int i = 0; + + if (!np) + return -ENODEV; + + of_property_read_u32(np, "clock-rate", &val); + pdata->clk_rate = val; + + pdata->board_flash_info = devm_kzalloc(&pdev->dev, + sizeof(*pdata->board_flash_info), + GFP_KERNEL); + + /* Fill structs for each subnode (flash device) */ + while ((pp = of_get_next_child(np, pp))) { + struct spear_smi_flash_info *flash_info; + + flash_info = &pdata->board_flash_info[i]; + pdata->np[i] = pp; + + /* Read base-addr and size from DT */ + addr = of_get_property(pp, "reg", &len); + pdata->board_flash_info->mem_base = be32_to_cpup(&addr[0]); + pdata->board_flash_info->size = be32_to_cpup(&addr[1]); + + if (of_get_property(pp, "st,smi-fast-mode", NULL)) + pdata->board_flash_info->fast_mode = 1; + + i++; + } + + pdata->num_flashes = i; + + return 0; +} +#else +static int __devinit spear_smi_probe_config_dt(struct platform_device *pdev, + struct device_node *np) +{ + return -ENOSYS; +} +#endif + +static int spear_smi_setup_banks(struct platform_device *pdev, + u32 bank, struct device_node *np) { struct spear_smi *dev = platform_get_drvdata(pdev); + struct mtd_part_parser_data ppdata = {}; struct spear_smi_flash_info *flash_info; struct spear_smi_plat_data *pdata; struct spear_snor_flash *flash; @@ -816,11 +869,16 @@ static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank) dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n", flash->mtd.erasesize, flash->mtd.erasesize / 1024); +#ifndef CONFIG_OF if (flash_info->partitions) { parts = flash_info->partitions; count = flash_info->nr_partitions; } - ret = mtd_device_parse_register(&flash->mtd, NULL, NULL, parts, count); +#endif + ppdata.of_node = np; + + ret = mtd_device_parse_register(&flash->mtd, NULL, &ppdata, parts, + count); if (ret) { dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); goto err_map; @@ -847,17 +905,34 @@ err_probe: */ static int __devinit spear_smi_probe(struct platform_device *pdev) { - struct spear_smi_plat_data *pdata; + struct device_node *np = pdev->dev.of_node; + struct spear_smi_plat_data *pdata = NULL; struct spear_smi *dev; struct resource *smi_base; int irq, ret = 0; int i; - pdata = dev_get_platdata(&pdev->dev); - if (pdata < 0) { - ret = -ENODEV; - dev_err(&pdev->dev, "no platform data\n"); - goto err; + if (np) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: ERROR: no memory", __func__); + ret = -ENOMEM; + goto err; + } + pdev->dev.platform_data = pdata; + ret = spear_smi_probe_config_dt(pdev, np); + if (ret) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata < 0) { + ret = -ENODEV; + dev_err(&pdev->dev, "no platform data\n"); + goto err; + } } smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -932,7 +1007,7 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) /* loop for each serial nor-flash which is connected to smi */ for (i = 0; i < dev->num_flashes; i++) { - ret = spear_smi_setup_banks(pdev, i); + ret = spear_smi_setup_banks(pdev, i, pdata->np[i]); if (ret) { dev_err(&dev->pdev->dev, "bank setup failed\n"); goto err_bank_setup; @@ -967,6 +1042,7 @@ err: static int __devexit spear_smi_remove(struct platform_device *pdev) { struct spear_smi *dev; + struct spear_smi_plat_data *pdata; struct spear_snor_flash *flash; struct resource *smi_base; int ret; @@ -978,6 +1054,8 @@ static int __devexit spear_smi_remove(struct platform_device *pdev) return -ENODEV; } + pdata = dev_get_platdata(&pdev->dev); + /* clean up for all nor flash */ for (i = 0; i < dev->num_flashes; i++) { flash = dev->flash[i]; @@ -1031,11 +1109,20 @@ int spear_smi_resume(struct platform_device *pdev) return ret; } +#ifdef CONFIG_OF +static const struct of_device_id spear_smi_id_table[] = { + { .compatible = "st,spear600-smi" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_smi_id_table); +#endif + static struct platform_driver spear_smi_driver = { .driver = { .name = "smi", .bus = &platform_bus_type, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(spear_smi_id_table), }, .probe = spear_smi_probe, .remove = __devexit_p(spear_smi_remove), diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h index 4e26b4e38da..8ae1726044c 100644 --- a/include/linux/mtd/spear_smi.h +++ b/include/linux/mtd/spear_smi.h @@ -14,6 +14,10 @@ #include #include #include +#include + +/* max possible slots for serial-nor flash chip in the SMI controller */ +#define MAX_NUM_FLASH_CHIP 4 /* macro to define partitions for flash devices */ #define DEFINE_PARTS(n, of, s) \ @@ -55,6 +59,7 @@ struct spear_smi_plat_data { unsigned long clk_rate; int num_flashes; struct spear_smi_flash_info *board_flash_info; + struct device_node *np[MAX_NUM_FLASH_CHIP]; }; #endif /* __MTD_SPEAR_SMI_H */ -- cgit v1.2.3-70-g09d2 From c743e44fbb1f8668941e83de07662b1ecd33d083 Mon Sep 17 00:00:00 2001 From: Lee Duncan Date: Thu, 1 Mar 2012 12:41:01 -0800 Subject: [SCSI] st: expand ability to write immediate filemarks The st tape driver recently added the MTWEOFI ioctl, which writes a tape filemark (EOF), like the MTWEOF ioctl, except that MTWEOFI returns immediately. This makes certain applications, like backup software, run much more quickly on buffered tape drives. Since legacy applications do not know about this new MTWEOFI ioctl, this patch adds a new ioctl option that tells the st driver to return immediately when writing an EOF (i.e. a filemark). This new flag is much like the existing flag that tells the st driver to perform writes (and certain other IOs) immediately, but this new flag only applies to writing EOFs. This new feature is controlled via the MTSETDRVBUFFER ioctl, using the newly-defined MT_ST_NOWAIT_EOF flag. Use of this new feature is displayed via the sysfs tape "options" attribute. The st documentation was updated to mention this new flag, as well as the problems that can occur from using it. Signed-off-by: Lee Duncan Acked-by: Kai Makisara Signed-off-by: James Bottomley --- Documentation/scsi/st.txt | 4 ++++ drivers/scsi/st.c | 21 ++++++++++++++++++--- drivers/scsi/st.h | 1 + include/linux/mtio.h | 1 + 4 files changed, 24 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt index 691ca292c24..685bf3582ab 100644 --- a/Documentation/scsi/st.txt +++ b/Documentation/scsi/st.txt @@ -390,6 +390,10 @@ MTSETDRVBUFFER MT_ST_SYSV sets the SYSV semantics (mode) MT_ST_NOWAIT enables immediate mode (i.e., don't wait for the command to finish) for some commands (e.g., rewind) + MT_ST_NOWAIT_EOF enables immediate filemark mode (i.e. when + writing a filemark, don't wait for it to complete). Please + see the BASICS note about MTWEOFI with respect to the + possible dangers of writing immediate filemarks. MT_ST_SILI enables setting the SILI bit in SCSI commands when reading in variable block mode to enhance performance when reading blocks shorter than the byte count; set this only diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9262cdfa4b2..8c663e16fd0 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -1106,6 +1106,12 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) STp->drv_buffer)); } STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; + if (!STp->drv_buffer && STp->immediate_filemark) { + printk(KERN_WARNING + "%s: non-buffered tape: disabling writing immediate filemarks\n", + name); + STp->immediate_filemark = 0; + } } st_release_request(SRpnt); SRpnt = NULL; @@ -1314,6 +1320,8 @@ static int st_flush(struct file *filp, fl_owner_t id) memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = WRITE_FILEMARKS; + if (STp->immediate_filemark) + cmd[1] = 1; cmd[4] = 1 + STp->two_fm; SRpnt = st_do_scsi(NULL, STp, cmd, 0, DMA_NONE, @@ -2181,8 +2189,9 @@ static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions, STp->scsi2_logical); printk(KERN_INFO - "%s: sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate, - STp->sili); + "%s: sysv: %d nowait: %d sili: %d nowait_filemark: %d\n", + name, STm->sysv, STp->immediate, STp->sili, + STp->immediate_filemark); printk(KERN_INFO "%s: debugging: %d\n", name, debugging); } @@ -2224,6 +2233,7 @@ static int st_set_options(struct scsi_tape *STp, long options) STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0; STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0; STp->immediate = (options & MT_ST_NOWAIT) != 0; + STp->immediate_filemark = (options & MT_ST_NOWAIT_EOF) != 0; STm->sysv = (options & MT_ST_SYSV) != 0; STp->sili = (options & MT_ST_SILI) != 0; DEB( debugging = (options & MT_ST_DEBUGGING) != 0; @@ -2255,6 +2265,8 @@ static int st_set_options(struct scsi_tape *STp, long options) STp->scsi2_logical = value; if ((options & MT_ST_NOWAIT) != 0) STp->immediate = value; + if ((options & MT_ST_NOWAIT_EOF) != 0) + STp->immediate_filemark = value; if ((options & MT_ST_SYSV) != 0) STm->sysv = value; if ((options & MT_ST_SILI) != 0) @@ -2714,7 +2726,8 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon cmd[0] = WRITE_FILEMARKS; if (cmd_in == MTWSM) cmd[1] = 2; - if (cmd_in == MTWEOFI) + if (cmd_in == MTWEOFI || + (cmd_in == MTWEOF && STp->immediate_filemark)) cmd[1] |= 1; cmd[2] = (arg >> 16); cmd[3] = (arg >> 8); @@ -4093,6 +4106,7 @@ static int st_probe(struct device *dev) tpnt->scsi2_logical = ST_SCSI2LOGICAL; tpnt->sili = ST_SILI; tpnt->immediate = ST_NOWAIT; + tpnt->immediate_filemark = 0; tpnt->default_drvbuffer = 0xff; /* No forced buffering */ tpnt->partition = 0; tpnt->new_partition = 0; @@ -4478,6 +4492,7 @@ st_options_show(struct device *dev, struct device_attribute *attr, char *buf) options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0; options |= STm->sysv ? MT_ST_SYSV : 0; options |= STp->immediate ? MT_ST_NOWAIT : 0; + options |= STp->immediate_filemark ? MT_ST_NOWAIT_EOF : 0; options |= STp->sili ? MT_ST_SILI : 0; l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options); diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index f91a67c6d96..ea35632b986 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -120,6 +120,7 @@ struct scsi_tape { unsigned char c_algo; /* compression algorithm */ unsigned char pos_unknown; /* after reset position unknown */ unsigned char sili; /* use SILI when reading in variable b mode */ + unsigned char immediate_filemark; /* write filemark immediately */ int tape_type; int long_timeout; /* timeout for commands known to take long time */ diff --git a/include/linux/mtio.h b/include/linux/mtio.h index 8f825756c45..18543e2db06 100644 --- a/include/linux/mtio.h +++ b/include/linux/mtio.h @@ -194,6 +194,7 @@ struct mtpos { #define MT_ST_SYSV 0x1000 #define MT_ST_NOWAIT 0x2000 #define MT_ST_SILI 0x4000 +#define MT_ST_NOWAIT_EOF 0x8000 /* The mode parameters to be controlled. Parameter chosen with bits 20-28 */ #define MT_ST_CLEAR_DEFAULT 0xfffff -- cgit v1.2.3-70-g09d2 From 2baab4e90495ebc9826c93f79d74d6e60a828d24 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 20 Mar 2012 15:57:01 +0100 Subject: sched: Fix select_fallback_rq() vs cpu_active/cpu_online Commit 5fbd036b55 ("sched: Cleanup cpu_active madness"), which was supposed to finally sort the cpu_active mess, instead uncovered more. Since CPU_STARTING is ran before setting the cpu online, there's a (small) window where the cpu has active,!online. If during this time there's a wakeup of a task that used to reside on that cpu select_task_rq() will use select_fallback_rq() to compute an alternative cpu to run on since we find !online. select_fallback_rq() however will compute the new cpu against cpu_active, this means that it can return the same cpu it started out with, the !online one, since that cpu is in fact marked active. This results in us trying to scheduling a task on an offline cpu and triggering a WARN in the IPI code. The solution proposed by Chuansheng Liu of setting cpu_active in set_cpu_online() is buggy, firstly not all archs actually use set_cpu_online(), secondly, not all archs call set_cpu_online() with IRQs disabled, this means we would introduce either the same race or the race from fd8a7de17 ("x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU") -- albeit much narrower. [ By setting online first and active later we have a window of online,!active, fresh and bound kthreads have task_cpu() of 0 and since cpu0 isn't in tsk_cpus_allowed() we end up in select_fallback_rq() which excludes !active, resulting in a reset of ->cpus_allowed and the thread running all over the place. ] The solution is to re-work select_fallback_rq() to require active _and_ online. This makes the active,!online case work as expected, OTOH archs running CPU_STARTING after setting online are now vulnerable to the issue from fd8a7de17 -- these are alpha and blackfin. Reported-by: Chuansheng Liu Signed-off-by: Peter Zijlstra Cc: Mike Frysinger Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/n/tip-hubqk1i10o4dpvlm06gq7v6j@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/cpuset.h | 6 ++--- kernel/cpuset.c | 20 ++++------------ kernel/sched/core.c | 62 +++++++++++++++++++++++++++++++++++++------------- 3 files changed, 52 insertions(+), 36 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index e9eaec52265..e0ffaf061ab 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -22,7 +22,7 @@ extern int cpuset_init(void); extern void cpuset_init_smp(void); extern void cpuset_update_active_cpus(void); extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask); -extern int cpuset_cpus_allowed_fallback(struct task_struct *p); +extern void cpuset_cpus_allowed_fallback(struct task_struct *p); extern nodemask_t cpuset_mems_allowed(struct task_struct *p); #define cpuset_current_mems_allowed (current->mems_allowed) void cpuset_init_current_mems_allowed(void); @@ -144,10 +144,8 @@ static inline void cpuset_cpus_allowed(struct task_struct *p, cpumask_copy(mask, cpu_possible_mask); } -static inline int cpuset_cpus_allowed_fallback(struct task_struct *p) +static inline void cpuset_cpus_allowed_fallback(struct task_struct *p) { - do_set_cpus_allowed(p, cpu_possible_mask); - return cpumask_any(cpu_active_mask); } static inline nodemask_t cpuset_mems_allowed(struct task_struct *p) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index a09ac2b9a66..c9837b74ab9 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -2195,7 +2195,7 @@ void cpuset_cpus_allowed(struct task_struct *tsk, struct cpumask *pmask) mutex_unlock(&callback_mutex); } -int cpuset_cpus_allowed_fallback(struct task_struct *tsk) +void cpuset_cpus_allowed_fallback(struct task_struct *tsk) { const struct cpuset *cs; int cpu; @@ -2219,22 +2219,10 @@ int cpuset_cpus_allowed_fallback(struct task_struct *tsk) * changes in tsk_cs()->cpus_allowed. Otherwise we can temporary * set any mask even if it is not right from task_cs() pov, * the pending set_cpus_allowed_ptr() will fix things. + * + * select_fallback_rq() will fix things ups and set cpu_possible_mask + * if required. */ - - cpu = cpumask_any_and(&tsk->cpus_allowed, cpu_active_mask); - if (cpu >= nr_cpu_ids) { - /* - * Either tsk->cpus_allowed is wrong (see above) or it - * is actually empty. The latter case is only possible - * if we are racing with remove_tasks_in_empty_cpuset(). - * Like above we can temporary set any mask and rely on - * set_cpus_allowed_ptr() as synchronization point. - */ - do_set_cpus_allowed(tsk, cpu_possible_mask); - cpu = cpumask_any(cpu_active_mask); - } - - return cpu; } void cpuset_init_current_mems_allowed(void) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index e3ccc13c4ca..9c1629c90b2 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -1263,29 +1263,59 @@ EXPORT_SYMBOL_GPL(kick_process); */ static int select_fallback_rq(int cpu, struct task_struct *p) { - int dest_cpu; const struct cpumask *nodemask = cpumask_of_node(cpu_to_node(cpu)); + enum { cpuset, possible, fail } state = cpuset; + int dest_cpu; /* Look for allowed, online CPU in same node. */ - for_each_cpu_and(dest_cpu, nodemask, cpu_active_mask) + for_each_cpu_mask(dest_cpu, *nodemask) { + if (!cpu_online(dest_cpu)) + continue; + if (!cpu_active(dest_cpu)) + continue; if (cpumask_test_cpu(dest_cpu, tsk_cpus_allowed(p))) return dest_cpu; + } - /* Any allowed, online CPU? */ - dest_cpu = cpumask_any_and(tsk_cpus_allowed(p), cpu_active_mask); - if (dest_cpu < nr_cpu_ids) - return dest_cpu; + for (;;) { + /* Any allowed, online CPU? */ + for_each_cpu_mask(dest_cpu, *tsk_cpus_allowed(p)) { + if (!cpu_online(dest_cpu)) + continue; + if (!cpu_active(dest_cpu)) + continue; + goto out; + } - /* No more Mr. Nice Guy. */ - dest_cpu = cpuset_cpus_allowed_fallback(p); - /* - * Don't tell them about moving exiting tasks or - * kernel threads (both mm NULL), since they never - * leave kernel. - */ - if (p->mm && printk_ratelimit()) { - printk_sched("process %d (%s) no longer affine to cpu%d\n", - task_pid_nr(p), p->comm, cpu); + switch (state) { + case cpuset: + /* No more Mr. Nice Guy. */ + cpuset_cpus_allowed_fallback(p); + state = possible; + break; + + case possible: + do_set_cpus_allowed(p, cpu_possible_mask); + state = fail; + break; + + case fail: + BUG(); + break; + } + } + +out: + if (state != cpuset) { + /* + * Don't tell them about moving exiting tasks or + * kernel threads (both mm NULL), since they never + * leave kernel. + */ + if (p->mm && printk_ratelimit()) { + printk_sched("process %d (%s) no longer affine to cpu%d\n", + task_pid_nr(p), p->comm, cpu); + } } return dest_cpu; -- cgit v1.2.3-70-g09d2 From f0cc9cf99326926fd76f77645c48d16d647802eb Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 6 Feb 2012 10:42:39 +0100 Subject: mmc: core: Detect card removal on I/O error To prevent I/O as soon as possible at card removal, a new detect work is re-scheduled without a delay to let a rescan remove the card device as soon as possible. Additionally, MMC_CAP2_DETECT_ON_ERR can now be used to handle "slowly" removed cards that a scheduled detect work did not detect as removed. To prevent further I/O requests for these lingering removed cards, check if card has been removed and then schedule a detect work to properly remove it. Signed-off-by: Ulf Hansson Reviewed-by: Namjae Jeon Acked-by: Linus Walleij Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 24 +++++++++++++++++++++--- include/linux/mmc/host.h | 1 + 2 files changed, 22 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index faa0af10d33..436409f7f7b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2121,18 +2121,36 @@ int _mmc_detect_card_removed(struct mmc_host *host) int mmc_detect_card_removed(struct mmc_host *host) { struct mmc_card *card = host->card; + int ret; WARN_ON(!host->claimed); + + if (!card) + return 1; + + ret = mmc_card_removed(card); /* * The card will be considered unchanged unless we have been asked to * detect a change or host requires polling to provide card detection. */ - if (card && !host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) - return mmc_card_removed(card); + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL) && + !(host->caps2 & MMC_CAP2_DETECT_ON_ERR)) + return ret; host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps2 & MMC_CAP2_DETECT_ON_ERR)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + mmc_detect_change(host, 0); + } + } - return _mmc_detect_card_removed(host); + return ret; } EXPORT_SYMBOL(mmc_detect_card_removed); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ee2b0363c04..d1d3743fde9 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -258,6 +258,7 @@ struct mmc_host { #define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3-70-g09d2 From 907d2e7cc7ebba4ab398422a7f0435e1802be65b Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 29 Feb 2012 09:17:21 +0200 Subject: mmc: start removing enable / disable API Most parts of the enable / disable API are no longer used and can be removed. Signed-off-by: Adrian Hunter Tested-by: Venkatraman S Tested-by: Jaehoon Chung Signed-off-by: Chris Ball --- arch/arm/mach-exynos/mach-nuri.c | 5 +- arch/arm/mach-exynos/mach-universal_c210.c | 9 +- drivers/mmc/core/core.c | 187 +++-------------------------- drivers/mmc/core/host.c | 1 - drivers/mmc/core/host.h | 1 - drivers/mmc/host/davinci_mmc.c | 4 - drivers/mmc/host/omap_hsmmc.c | 15 +-- include/linux/mmc/core.h | 1 - include/linux/mmc/host.h | 46 +------ 9 files changed, 27 insertions(+), 242 deletions(-) (limited to 'include/linux') diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index aa37179d776..3cdabd39f97 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -109,7 +109,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE | MMC_CAP_ERASE), + MMC_CAP_ERASE), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -148,8 +148,7 @@ static struct platform_device emmc_fixed_voltage = { static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index b2d495b3109..87e3dcf714b 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -736,8 +736,7 @@ static struct platform_device universal_gpio_keys = { static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; @@ -775,8 +774,7 @@ static struct platform_device mmc0_fixed_voltage = { static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, @@ -787,8 +785,7 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { .max_width = 4, .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .cd_type = S3C_SDHCI_CD_EXTERNAL, }; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 436409f7f7b..9b56674ddc2 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -604,105 +604,6 @@ unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) } EXPORT_SYMBOL(mmc_align_data_size); -/** - * mmc_host_enable - enable a host. - * @host: mmc host to enable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_enable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (host->nesting_cnt++) - return 0; - - cancel_delayed_work_sync(&host->disable); - - if (host->enabled) - return 0; - - if (host->ops->enable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->enable(host); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err) { - pr_debug("%s: enable error %d\n", - mmc_hostname(host), err); - return err; - } - } - host->enabled = 1; - return 0; -} -EXPORT_SYMBOL(mmc_host_enable); - -static int mmc_host_do_disable(struct mmc_host *host, int lazy) -{ - if (host->ops->disable) { - int err; - - host->en_dis_recurs = 1; - mmc_host_clk_hold(host); - err = host->ops->disable(host, lazy); - mmc_host_clk_release(host); - host->en_dis_recurs = 0; - - if (err < 0) { - pr_debug("%s: disable error %d\n", - mmc_hostname(host), err); - return err; - } - if (err > 0) { - unsigned long delay = msecs_to_jiffies(err); - - mmc_schedule_delayed_work(&host->disable, delay); - } - } - host->enabled = 0; - return 0; -} - -/** - * mmc_host_disable - disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_disable(struct mmc_host *host) -{ - int err; - - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - err = mmc_host_do_disable(host, 0); - return err; -} -EXPORT_SYMBOL(mmc_host_disable); - /** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim @@ -741,8 +642,8 @@ int __mmc_claim_host(struct mmc_host *host, atomic_t *abort) wake_up(&host->wq); spin_unlock_irqrestore(&host->lock, flags); remove_wait_queue(&host->wq, &wait); - if (!stop) - mmc_host_enable(host); + if (host->ops->enable && !stop && host->claim_cnt == 1) + host->ops->enable(host); return stop; } @@ -767,21 +668,28 @@ int mmc_try_claim_host(struct mmc_host *host) claimed_host = 1; } spin_unlock_irqrestore(&host->lock, flags); + if (host->ops->enable && claimed_host && host->claim_cnt == 1) + host->ops->enable(host); return claimed_host; } EXPORT_SYMBOL(mmc_try_claim_host); /** - * mmc_do_release_host - release a claimed host + * mmc_release_host - release a host * @host: mmc host to release * - * If you successfully claimed a host, this function will - * release it again. + * Release a MMC host, allowing others to claim the host + * for their operations. */ -void mmc_do_release_host(struct mmc_host *host) +void mmc_release_host(struct mmc_host *host) { unsigned long flags; + WARN_ON(!host->claimed); + + if (host->ops->disable && host->claim_cnt == 1) + host->ops->disable(host); + spin_lock_irqsave(&host->lock, flags); if (--host->claim_cnt) { /* Release for nested claim */ @@ -793,67 +701,6 @@ void mmc_do_release_host(struct mmc_host *host) wake_up(&host->wq); } } -EXPORT_SYMBOL(mmc_do_release_host); - -void mmc_host_deeper_disable(struct work_struct *work) -{ - struct mmc_host *host = - container_of(work, struct mmc_host, disable.work); - - /* If the host is claimed then we do not want to disable it anymore */ - if (!mmc_try_claim_host(host)) - return; - mmc_host_do_disable(host, 1); - mmc_do_release_host(host); -} - -/** - * mmc_host_lazy_disable - lazily disable a host. - * @host: mmc host to disable - * - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. For more information - * see comments for struct mmc_host_ops. - */ -int mmc_host_lazy_disable(struct mmc_host *host) -{ - if (!(host->caps & MMC_CAP_DISABLE)) - return 0; - - if (host->en_dis_recurs) - return 0; - - if (--host->nesting_cnt) - return 0; - - if (!host->enabled) - return 0; - - if (host->disable_delay) { - mmc_schedule_delayed_work(&host->disable, - msecs_to_jiffies(host->disable_delay)); - return 0; - } else - return mmc_host_do_disable(host, 1); -} -EXPORT_SYMBOL(mmc_host_lazy_disable); - -/** - * mmc_release_host - release a host - * @host: mmc host to release - * - * Release a MMC host, allowing others to claim the host - * for their operations. - */ -void mmc_release_host(struct mmc_host *host) -{ - WARN_ON(!host->claimed); - - mmc_host_lazy_disable(host); - - mmc_do_release_host(host); -} - EXPORT_SYMBOL(mmc_release_host); /* @@ -2227,8 +2074,6 @@ void mmc_stop_host(struct mmc_host *host) spin_unlock_irqrestore(&host->lock, flags); #endif - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); cancel_delayed_work_sync(&host->detect); mmc_flush_scheduled_work(); @@ -2423,13 +2268,11 @@ int mmc_suspend_host(struct mmc_host *host) { int err = 0; - if (host->caps & MMC_CAP_DISABLE) - cancel_delayed_work(&host->disable); cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); if (mmc_try_claim_host(host)) { err = mmc_cache_ctrl(host, 0); - mmc_do_release_host(host); + mmc_release_host(host); } else { err = -EBUSY; } @@ -2450,7 +2293,7 @@ int mmc_suspend_host(struct mmc_host *host) if (host->bus_ops->suspend) { err = host->bus_ops->suspend(host); } - mmc_do_release_host(host); + mmc_release_host(host); if (err == -ENOSYS || !host->bus_ops->resume) { /* diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index c3704e293a7..91c84c7a182 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -330,7 +330,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); - INIT_DELAYED_WORK_DEFERRABLE(&host->disable, mmc_host_deeper_disable); #ifdef CONFIG_PM host->pm_notify.notifier_call = mmc_pm_notify; #endif diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index 08a7852ade4..f2ab9e57812 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -14,7 +14,6 @@ int mmc_register_host_class(void); void mmc_unregister_host_class(void); -void mmc_host_deeper_disable(struct work_struct *work); #endif diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 64a8325a4a8..8de9c9bdba0 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1418,17 +1418,14 @@ static int davinci_mmcsd_suspend(struct device *dev) struct mmc_davinci_host *host = platform_get_drvdata(pdev); int ret; - mmc_host_enable(host->mmc); ret = mmc_suspend_host(host->mmc); if (!ret) { writel(0, host->base + DAVINCI_MMCIM); mmc_davinci_reset_ctrl(host, 1); - mmc_host_disable(host->mmc); clk_disable(host->clk); host->suspended = 1; } else { host->suspended = 0; - mmc_host_disable(host->mmc); } return ret; @@ -1444,7 +1441,6 @@ static int davinci_mmcsd_resume(struct device *dev) return 0; clk_enable(host->clk); - mmc_host_enable(host->mmc); mmc_davinci_reset_ctrl(host, 0); ret = mmc_resume_host(host->mmc); diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index e5501704b2d..98adf0c51e0 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -167,7 +167,6 @@ struct omap_hsmmc_host { int got_dbclk; int response_busy; int context_loss; - int dpm_state; int vdd; int protect_card; int reqs_blocked; @@ -1619,7 +1618,7 @@ static int omap_hsmmc_enable_fclk(struct mmc_host *mmc) return 0; } -static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy) +static int omap_hsmmc_disable_fclk(struct mmc_host *mmc) { struct omap_hsmmc_host *host = mmc_priv(mmc); @@ -1653,15 +1652,8 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data) if (host->pdata->get_context_loss_count) context_loss = host->pdata->get_context_loss_count(host->dev); - seq_printf(s, "mmc%d:\n" - " enabled:\t%d\n" - " dpm_state:\t%d\n" - " nesting_cnt:\t%d\n" - " ctx_loss:\t%d:%d\n" - "\nregs:\n", - mmc->index, mmc->enabled ? 1 : 0, - host->dpm_state, mmc->nesting_cnt, - host->context_loss, context_loss); + seq_printf(s, "mmc%d:\n ctx_loss:\t%d:%d\n\nregs:\n", + mmc->index, host->context_loss, context_loss); if (host->suspended) { seq_printf(s, "host suspended, can't read registers\n"); @@ -1800,7 +1792,6 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_context_save(host); - mmc->caps |= MMC_CAP_DISABLE; if (host->pdata->controller_flags & OMAP_HSMMC_BROKEN_MULTIBLOCK_READ) { dev_info(&pdev->dev, "multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer\n"); mmc->caps2 |= MMC_CAP2_NO_MULTI_READ; diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 87a976cc565..2bfa589764d 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -175,7 +175,6 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); -extern void mmc_do_release_host(struct mmc_host *host); extern int mmc_try_claim_host(struct mmc_host *host); extern int mmc_flush_cache(struct mmc_card *); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index d1d3743fde9..e05bd241c67 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -80,34 +80,11 @@ struct mmc_ios { struct mmc_host_ops { /* - * Hosts that support power saving can use the 'enable' and 'disable' - * methods to exit and enter power saving states. 'enable' is called - * when the host is claimed and 'disable' is called (or scheduled with - * a delay) when the host is released. The 'disable' is scheduled if - * the disable delay set by 'mmc_set_disable_delay()' is non-zero, - * otherwise 'disable' is called immediately. 'disable' may be - * scheduled repeatedly, to permit ever greater power saving at the - * expense of ever greater latency to re-enable. Rescheduling is - * determined by the return value of the 'disable' method. A positive - * value gives the delay in milliseconds. - * - * In the case where a host function (like set_ios) may be called - * with or without the host claimed, enabling and disabling can be - * done directly and will nest correctly. Call 'mmc_host_enable()' and - * 'mmc_host_lazy_disable()' for this purpose, but note that these - * functions must be paired. - * - * Alternatively, 'mmc_host_enable()' may be paired with - * 'mmc_host_disable()' which calls 'disable' immediately. In this - * case the 'disable' method will be called with 'lazy' set to 0. - * This is mainly useful for error paths. - * - * Because lazy disable may be called from a work queue, the 'disable' - * method must claim the host when 'lazy' != 0, which will work - * correctly because recursion is detected and handled. + * 'enable' is called when the host is claimed and 'disable' is called + * when the host is released. 'enable' and 'disable' are deprecated. */ int (*enable)(struct mmc_host *host); - int (*disable)(struct mmc_host *host, int lazy); + int (*disable)(struct mmc_host *host); /* * It is optional for the host to implement pre_req and post_req in * order to support double buffering of requests (prepare one @@ -218,7 +195,7 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ -#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ + #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ #define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ @@ -301,13 +278,7 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif - /* Only used with MMC_CAP_DISABLE */ - int enabled; /* host is enabled */ int rescan_disable; /* disable card detection */ - int nesting_cnt; /* "enable" nesting count */ - int en_dis_recurs; /* detect recursion */ - unsigned int disable_delay; /* disable delay in msecs */ - struct delayed_work disable; /* disabling work */ struct mmc_card *card; /* device attached to this host */ @@ -407,17 +378,8 @@ int mmc_card_awake(struct mmc_host *host); int mmc_card_sleep(struct mmc_host *host); int mmc_card_can_sleep(struct mmc_host *host); -int mmc_host_enable(struct mmc_host *host); -int mmc_host_disable(struct mmc_host *host); -int mmc_host_lazy_disable(struct mmc_host *host); int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *); -static inline void mmc_set_disable_delay(struct mmc_host *host, - unsigned int disable_delay) -{ - host->disable_delay = disable_delay; -} - /* Module parameter */ extern bool mmc_assume_removable; -- cgit v1.2.3-70-g09d2 From 83bb24aaa4af2ec7c127cc2a5fa7ca9f64cdd13d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 13 Mar 2012 05:19:13 -0400 Subject: mmc: core: add high-capacity erase size capability flag Let drivers specify the use of high-capacity erase size. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 3 ++- include/linux/mmc/host.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index d7d8a93c350..02914d609a9 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -952,7 +952,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF * bit. This bit will be lost every time after a reset or power off. */ - if (card->ext_csd.enhanced_area_en) { + if (card->ext_csd.enhanced_area_en || + (card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_ERASE_GROUP_DEF, 1, card->ext_csd.generic_cmd6_time); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index e05bd241c67..33a4d08d810 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -236,6 +236,7 @@ struct mmc_host { MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ #define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* On I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- cgit v1.2.3-70-g09d2 From 6308d2905bd30290d90f28730828fd572161dd11 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 7 Feb 2012 14:48:54 +0200 Subject: mmc: sdhci: add quirk for keeping card power during suspend Add quirk SDHCI_QUIRK2_HOST_OFF_CARD_ON to cater for the case when the card keeps power during suspend but the host controller does not i.e. the card power is not controlled by the host controller. In that case, the controller must be fully reset on resume. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 13 +++++++++++-- include/linux/mmc/sdhci.h | 2 ++ 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 1f5888b42b2..80cc7847c53 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2426,8 +2426,17 @@ int sdhci_resume_host(struct sdhci_host *host) if (ret) return ret; - sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); - mmiowb(); + if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && + (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { + /* Card keeps power but host controller does not */ + sdhci_init(host, 0); + host->pwr = 0; + host->clock = 0; + sdhci_do_set_ios(host, &host->mmc->ios); + } else { + sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER)); + mmiowb(); + } ret = mmc_resume_host(host->mmc); sdhci_enable_card_detection(host); diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index c750f85177d..e9051e1cb1c 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -90,6 +90,8 @@ struct sdhci_host { unsigned int quirks2; /* More deviations from spec. */ +#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) + int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ -- cgit v1.2.3-70-g09d2 From c9b0546a59293cabf54c85e1218da595af3274ff Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 9 Feb 2012 22:57:07 +0100 Subject: mmc: simplify mmc_cd_gpio_request() by removing two parameters Calculate the IRQ number, using gpio_to_irq() and use fixed flags: trigger on both edges. This makes two out of four arguments of the mmc_cd_gpio_request() function redundant. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/core/cd-gpio.c | 13 +++++++++---- include/linux/mmc/cd-gpio.h | 3 +-- 2 files changed, 10 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index 082202ae4a0..29de31e260d 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -28,13 +28,17 @@ static irqreturn_t mmc_cd_gpio_irqt(int irq, void *dev_id) return IRQ_HANDLED; } -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, - unsigned int irq, unsigned long flags) +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio) { size_t len = strlen(dev_name(host->parent)) + 4; - struct mmc_cd_gpio *cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL); + struct mmc_cd_gpio *cd; + int irq = gpio_to_irq(gpio); int ret; + if (irq < 0) + return irq; + + cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL); if (!cd) return -ENOMEM; @@ -45,7 +49,8 @@ int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, goto egpioreq; ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt, - flags, cd->label, host); + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + cd->label, host); if (ret < 0) goto eirqreq; diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h index a8e46978331..cefaba038cc 100644 --- a/include/linux/mmc/cd-gpio.h +++ b/include/linux/mmc/cd-gpio.h @@ -12,8 +12,7 @@ #define MMC_CD_GPIO_H struct mmc_host; -int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio, - unsigned int irq, unsigned long flags); +int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio); void mmc_cd_gpio_free(struct mmc_host *host); #endif -- cgit v1.2.3-70-g09d2 From c8be24c2afd3ed2445bbf8f542af35a9787fc0e8 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 9 Feb 2012 22:57:09 +0100 Subject: mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper If the platform specifies the TMIO_MMC_HAS_COLD_CD flag, use the generic MMC GPIO card hotplug helper. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.h | 4 --- drivers/mmc/host/tmio_mmc_pio.c | 69 ++++++++++++++++++----------------------- include/linux/mfd/tmio.h | 25 +++++++++++---- 3 files changed, 50 insertions(+), 48 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 8531d8d44fc..ede2f4e5b95 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -53,10 +53,6 @@ struct tmio_mmc_host { void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); - int pm_error; - /* recognise system-wide suspend in runtime PM methods */ - bool pm_global; - /* pio related stuff */ struct scatterlist *sg_ptr; struct scatterlist *sg_orig; diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 49f7f218cee..42970ab6e80 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -791,8 +792,10 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_unlock_irqrestore(&host->lock, flags); /* - * pdata->power == false only if COLD_CD is available, otherwise only - * in short time intervals during probing or resuming + * pdata->power toggles between false and true in both cases - either + * or not the controller can be runtime-suspended during inactivity. + * But if the controller has to be kept on, the runtime-pm usage_count + * is kept positive, so no suspending actually takes place. */ if (ios->power_mode == MMC_POWER_ON && ios->clock) { if (!pdata->power) { @@ -916,7 +919,7 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, else mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - _host->native_hotplug = !(pdata->flags & TMIO_MMC_HAS_COLD_CD || + _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || mmc->caps & MMC_CAP_NEEDS_POLL || mmc->caps & MMC_CAP_NONREMOVABLE); @@ -933,8 +936,9 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, * 3) a worker thread polls the sdhi - indicated by MMC_CAP_NEEDS_POLL * 4) the medium is non-removable - indicated by MMC_CAP_NONREMOVABLE * - * While we increment the rtpm counter for all scenarios when the mmc - * core activates us by calling an appropriate set_ios(), we must + * While we increment the runtime PM counter for all scenarios when + * the mmc core activates us by calling an appropriate set_ios(), we + * must additionally ensure that in case 2) the tmio mmc hardware stays * additionally ensure that in case 2) the tmio mmc hardware stays * powered on during runtime for the card detection to work. */ @@ -973,6 +977,14 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, tmio_mmc_enable_mmc_irqs(_host, irq_mask); + if (pdata->flags & TMIO_MMC_USE_GPIO_CD) { + ret = mmc_cd_gpio_request(mmc, pdata->cd_gpio); + if (ret < 0) { + tmio_mmc_host_remove(_host); + return ret; + } + } + *host = _host; return 0; @@ -990,20 +1002,22 @@ EXPORT_SYMBOL(tmio_mmc_host_probe); void tmio_mmc_host_remove(struct tmio_mmc_host *host) { struct platform_device *pdev = host->pdev; + struct tmio_mmc_data *pdata = host->pdata; + struct mmc_host *mmc = host->mmc; + + if (pdata->flags & TMIO_MMC_USE_GPIO_CD) + /* + * This means we can miss a card-eject, but this is anyway + * possible, because of delayed processing of hotplug events. + */ + mmc_cd_gpio_free(mmc); - /* - * We don't have to manipulate pdata->power here: if there is a card in - * the slot, the runtime PM is active and our .runtime_resume() will not - * be run. If there is no card in the slot and the platform can suspend - * the controller, the runtime PM is suspended and pdata->power == false, - * so, our .runtime_resume() will not try to detect a card in the slot. - */ if (!host->native_hotplug) pm_runtime_get_sync(&pdev->dev); dev_pm_qos_hide_latency_limit(&pdev->dev); - mmc_remove_host(host->mmc); + mmc_remove_host(mmc); cancel_work_sync(&host->done); cancel_delayed_work_sync(&host->delayed_reset_work); tmio_mmc_release_dma(host); @@ -1012,7 +1026,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host) pm_runtime_disable(&pdev->dev); iounmap(host->ctl); - mmc_free_host(host->mmc); + mmc_free_host(mmc); } EXPORT_SYMBOL(tmio_mmc_host_remove); @@ -1026,8 +1040,6 @@ int tmio_mmc_host_suspend(struct device *dev) if (!ret) tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL); - host->pm_error = pm_runtime_put_sync(dev); - return ret; } EXPORT_SYMBOL(tmio_mmc_host_suspend); @@ -1037,20 +1049,10 @@ int tmio_mmc_host_resume(struct device *dev) struct mmc_host *mmc = dev_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); - /* The MMC core will perform the complete set up */ - host->pdata->power = false; - - host->pm_global = true; - if (!host->pm_error) - pm_runtime_get_sync(dev); - - if (host->pm_global) { - /* Runtime PM resume callback didn't run */ - tmio_mmc_reset(host); - tmio_mmc_enable_dma(host, true); - host->pm_global = false; - } + tmio_mmc_reset(host); + tmio_mmc_enable_dma(host, true); + /* The MMC core will perform the complete set up */ return mmc_resume_host(mmc); } EXPORT_SYMBOL(tmio_mmc_host_resume); @@ -1067,19 +1069,10 @@ int tmio_mmc_host_runtime_resume(struct device *dev) { struct mmc_host *mmc = dev_get_drvdata(dev); struct tmio_mmc_host *host = mmc_priv(mmc); - struct tmio_mmc_data *pdata = host->pdata; tmio_mmc_reset(host); tmio_mmc_enable_dma(host, true); - if (pdata->power) { - /* Only entered after a card-insert interrupt */ - if (!mmc->card) - tmio_mmc_set_ios(mmc, &mmc->ios); - mmc_detect_change(mmc, msecs_to_jiffies(100)); - } - host->pm_global = false; - return 0; } EXPORT_SYMBOL(tmio_mmc_host_runtime_resume); diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 0dc98044d8b..5a197de4aac 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -1,8 +1,10 @@ #ifndef MFD_TMIO_H #define MFD_TMIO_H +#include #include #include +#include #include #include @@ -64,8 +66,8 @@ #define TMIO_MMC_SDIO_IRQ (1 << 2) /* * Some platforms can detect card insertion events with controller powered - * down, in which case they have to call tmio_mmc_cd_wakeup() to power up the - * controller and report the event to the driver. + * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio, + * and cd_flags fields of struct tmio_mmc_data. */ #define TMIO_MMC_HAS_COLD_CD (1 << 3) /* @@ -73,6 +75,12 @@ * idle before writing to some registers. */ #define TMIO_MMC_HAS_IDLE_WAIT (1 << 4) +/* + * A GPIO is used for card hotplug detection. We need an extra flag for this, + * because 0 is a valid GPIO number too, and requiring users to specify + * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility. + */ +#define TMIO_MMC_USE_GPIO_CD (1 << 5) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); @@ -98,18 +106,23 @@ struct tmio_mmc_data { struct tmio_mmc_dma *dma; struct device *dev; bool power; + unsigned int cd_gpio; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); int (*write16_hook)(struct tmio_mmc_host *host, int addr); }; +/* + * This function is deprecated and will be removed soon. Please, convert your + * platform to use drivers/mmc/core/cd-gpio.c + */ +#include static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata) { - if (pdata && !pdata->power) { - pdata->power = true; - pm_runtime_get(pdata->dev); - } + if (pdata) + mmc_detect_change(dev_get_drvdata(pdata->dev), + msecs_to_jiffies(100)); } /* -- cgit v1.2.3-70-g09d2 From 58126c878b4a4f658015e383614bafb6331e46d3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 9 Feb 2012 22:57:10 +0100 Subject: mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC To use TMIO MMC driver ability to interface to the generic MMC GPIO card hotplug detection helper, the SDHI driver has to pass the GPIO number from its own platform data. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mobile_sdhi.c | 3 ++- include/linux/mmc/sh_mobile_sdhi.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 58da3c44acc..cb279b4e501 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -129,6 +129,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->write16_hook = sh_mobile_sdhi_write16_hook; mmc_data->ocr_mask = p->tmio_ocr_mask; mmc_data->capabilities |= p->tmio_caps; + mmc_data->cd_gpio = p->cd_gpio; if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) { priv->param_tx.slave_id = p->dma_slave_tx; @@ -211,7 +212,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) dev_info(&pdev->dev, "%s base at 0x%08lx clock rate %u MHz\n", mmc_hostname(host->mmc), (unsigned long) - (platform_get_resource(pdev,IORESOURCE_MEM, 0)->start), + (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start), mmc_data->hclk / 1000000); return ret; diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index 71b805451bd..082a736a9bf 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -16,6 +16,7 @@ struct sh_mobile_sdhi_info { unsigned long tmio_flags; unsigned long tmio_caps; u32 tmio_ocr_mask; /* available MMC voltages */ + unsigned int cd_gpio; struct tmio_mmc_data *pdata; void (*set_pwr)(struct platform_device *pdev, int state); int (*get_cd)(struct platform_device *pdev); -- cgit v1.2.3-70-g09d2 From c391e1b9ebfe31514fa95a0cdd30c2cbc9652c89 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 9 Feb 2012 22:57:13 +0100 Subject: mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data The controller power status flag does not have to be accessed from the hot-plug detection code any more, it can now be removed from the platform data and put in the controller private struct. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.h | 3 +++ drivers/mmc/host/tmio_mmc_pio.c | 13 ++++++------- include/linux/mfd/tmio.h | 1 - 3 files changed, 9 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index ede2f4e5b95..edfcfd76751 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -49,6 +49,9 @@ struct tmio_mmc_host { struct mmc_host *mmc; unsigned int sdio_irq_enabled; + /* Controller power state */ + bool power; + /* Callbacks for clock / power control */ void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 42970ab6e80..9f22681a37b 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -762,7 +762,6 @@ fail: static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct tmio_mmc_host *host = mmc_priv(mmc); - struct tmio_mmc_data *pdata = host->pdata; unsigned long flags; mutex_lock(&host->ios_lock); @@ -792,15 +791,15 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_unlock_irqrestore(&host->lock, flags); /* - * pdata->power toggles between false and true in both cases - either + * host->power toggles between false and true in both cases - either * or not the controller can be runtime-suspended during inactivity. * But if the controller has to be kept on, the runtime-pm usage_count * is kept positive, so no suspending actually takes place. */ if (ios->power_mode == MMC_POWER_ON && ios->clock) { - if (!pdata->power) { + if (!host->power) { pm_runtime_get_sync(&host->pdev->dev); - pdata->power = true; + host->power = true; } tmio_mmc_set_clock(host, ios->clock); /* power up SD bus */ @@ -811,8 +810,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } else if (ios->power_mode != MMC_POWER_UP) { if (host->set_pwr && ios->power_mode == MMC_POWER_OFF) host->set_pwr(host->pdev, 0); - if (pdata->power) { - pdata->power = false; + if (host->power) { + host->power = false; pm_runtime_put(&host->pdev->dev); } tmio_mmc_clk_stop(host); @@ -923,7 +922,7 @@ int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, mmc->caps & MMC_CAP_NEEDS_POLL || mmc->caps & MMC_CAP_NONREMOVABLE); - pdata->power = false; + _host->power = false; pm_runtime_enable(&pdev->dev); ret = pm_runtime_resume(&pdev->dev); if (ret < 0) diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 5a197de4aac..f5171dbf885 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -105,7 +105,6 @@ struct tmio_mmc_data { u32 ocr_mask; /* available voltages */ struct tmio_mmc_dma *dma; struct device *dev; - bool power; unsigned int cd_gpio; void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); -- cgit v1.2.3-70-g09d2 From e82b4ac94e5c43fad51b975aed058858ceda1f0f Mon Sep 17 00:00:00 2001 From: Bastian Hecht Date: Fri, 16 Mar 2012 12:19:29 -0400 Subject: mmc: sh_mobile_sdhi: add a callback for board specific init code Some boards need a preliminary setup stage to prepare the sdhi controller. Signed-off-by: Bastian Hecht Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mobile_sdhi.c | 13 +++++++++++++ include/linux/mmc/sh_mobile_sdhi.h | 4 ++++ 2 files changed, 17 insertions(+) (limited to 'include/linux') diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index f91c3aa40d1..07ff3fee77b 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -109,6 +109,12 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data = &priv->mmc_data; p->pdata = mmc_data; + if (p->init) { + ret = p->init(pdev); + if (ret) + goto einit; + } + snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id); priv->clk = clk_get(&pdev->dev, clk_name); if (IS_ERR(priv->clk)) { @@ -233,6 +239,9 @@ eirq_card_detect: eprobe: clk_put(priv->clk); eclkget: + if (p->cleanup) + p->cleanup(pdev); +einit: kfree(priv); return ret; } @@ -257,6 +266,10 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev) } clk_put(priv->clk); + + if (p->cleanup) + p->cleanup(pdev); + kfree(priv); return 0; diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index 082a736a9bf..686b85bfb7a 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -20,6 +20,10 @@ struct sh_mobile_sdhi_info { struct tmio_mmc_data *pdata; void (*set_pwr)(struct platform_device *pdev, int state); int (*get_cd)(struct platform_device *pdev); + + /* callbacks for board specific setup code */ + int (*init)(struct platform_device *pdev); + void (*cleanup)(struct platform_device *pdev); }; #endif /* LINUX_MMC_SH_MOBILE_SDHI_H */ -- cgit v1.2.3-70-g09d2 From 7f524217439cc17da74523582c303cced432713e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 9 Mar 2012 10:16:00 +0100 Subject: mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug Currently if a platform wants to implement a non-standard card-detection method, it would need to call tmio_mmc_cd_wakeup(), which is an inline function, calling mmc_detect_change(). For this the platform would have to link mmc_core statically into the kernel, losing the ability to build it as a module. This patch adds a callback to the sh_mobile_sdhi driver, which eliminates this dependency. Signed-off-by: Guennadi Liakhovetski Acked-by: Magnus Damm Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mobile_sdhi.c | 11 ++++++++++- include/linux/mmc/sh_mobile_sdhi.h | 11 ++++++++++- 2 files changed, 20 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 07ff3fee77b..934b68e9efc 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -90,6 +90,15 @@ static int sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) return 0; } +static void sh_mobile_sdhi_cd_wakeup(const struct platform_device *pdev) +{ + mmc_detect_change(dev_get_drvdata(&pdev->dev), msecs_to_jiffies(100)); +} + +static const struct sh_mobile_sdhi_ops sdhi_ops = { + .cd_wakeup = sh_mobile_sdhi_cd_wakeup, +}; + static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) { struct sh_mobile_sdhi *priv; @@ -110,7 +119,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) p->pdata = mmc_data; if (p->init) { - ret = p->init(pdev); + ret = p->init(pdev, &sdhi_ops); if (ret) goto einit; } diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index 686b85bfb7a..e94e620aedd 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -10,6 +10,14 @@ struct tmio_mmc_data; #define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard" #define SH_MOBILE_SDHI_IRQ_SDIO "sdio" +/** + * struct sh_mobile_sdhi_ops - SDHI driver callbacks + * @cd_wakeup: trigger a card-detection run + */ +struct sh_mobile_sdhi_ops { + void (*cd_wakeup)(const struct platform_device *pdev); +}; + struct sh_mobile_sdhi_info { int dma_slave_tx; int dma_slave_rx; @@ -22,7 +30,8 @@ struct sh_mobile_sdhi_info { int (*get_cd)(struct platform_device *pdev); /* callbacks for board specific setup code */ - int (*init)(struct platform_device *pdev); + int (*init)(struct platform_device *pdev, + const struct sh_mobile_sdhi_ops *ops); void (*cleanup)(struct platform_device *pdev); }; -- cgit v1.2.3-70-g09d2 From 135111cc5595c6a24dd826d503e2d2bae92da1c4 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 16 Mar 2012 12:49:04 +0100 Subject: mmc: sh_mmcif: simplify bitmask macros Purely cosmetic readability improvement, no functional change. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- include/linux/mmc/sh_mmcif.h | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 04ff452bf5c..05f0e3db1c1 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -77,18 +77,15 @@ struct sh_mmcif_plat_data { /* CE_CLK_CTRL */ #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ -#define CLK_CLEAR ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLK_SUP_PCLK ((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16)) -#define CLKDIV_4 (1<<16) /* mmc clock frequency. - * n: bus clock/(2^(n+1)) */ -#define CLKDIV_256 (7<<16) /* mmc clock frequency. (see above) */ -#define SRSPTO_256 ((1 << 13) | (0 << 12)) /* resp timeout */ -#define SRBSYTO_29 ((1 << 11) | (1 << 10) | \ - (1 << 9) | (1 << 8)) /* resp busy timeout */ -#define SRWDTO_29 ((1 << 7) | (1 << 6) | \ - (1 << 5) | (1 << 4)) /* read/write timeout */ -#define SCCSTO_29 ((1 << 3) | (1 << 2) | \ - (1 << 1) | (1 << 0)) /* ccs timeout */ +#define CLK_CLEAR (0xf << 16) +#define CLK_SUP_PCLK (0xf << 16) +#define CLKDIV_4 (1 << 16) /* mmc clock frequency. + * n: bus clock/(2^(n+1)) */ +#define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */ +#define SRSPTO_256 (2 << 12) /* resp timeout */ +#define SRBSYTO_29 (0xf << 8) /* resp busy timeout */ +#define SRWDTO_29 (0xf << 4) /* read/write timeout */ +#define SCCSTO_29 (0xf << 0) /* ccs timeout */ /* CE_VERSION */ #define SOFT_RST_ON (1 << 31) -- cgit v1.2.3-70-g09d2 From 86a1e1896c2710402e29a875d8d830244274244d Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Mon, 5 Mar 2012 16:51:11 +0100 Subject: watchdog: nowayout is bool nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck --- drivers/char/ipmi/ipmi_watchdog.c | 4 ++-- drivers/hwmon/fschmd.c | 4 ++-- drivers/hwmon/w83793.c | 4 ++-- drivers/watchdog/acquirewdt.c | 4 ++-- drivers/watchdog/advantechwdt.c | 4 ++-- drivers/watchdog/alim1535_wdt.c | 4 ++-- drivers/watchdog/alim7101_wdt.c | 4 ++-- drivers/watchdog/ar7_wdt.c | 4 ++-- drivers/watchdog/at32ap700x_wdt.c | 4 ++-- drivers/watchdog/at91rm9200_wdt.c | 4 ++-- drivers/watchdog/at91sam9_wdt.c | 4 ++-- drivers/watchdog/ath79_wdt.c | 4 ++-- drivers/watchdog/bcm47xx_wdt.c | 4 ++-- drivers/watchdog/bcm63xx_wdt.c | 4 ++-- drivers/watchdog/bfin_wdt.c | 4 ++-- drivers/watchdog/dw_wdt.c | 4 ++-- drivers/watchdog/ep93xx_wdt.c | 4 ++-- drivers/watchdog/eurotechwdt.c | 4 ++-- drivers/watchdog/gef_wdt.c | 4 ++-- drivers/watchdog/geodewdt.c | 4 ++-- drivers/watchdog/hpwdt.c | 4 ++-- drivers/watchdog/i6300esb.c | 4 ++-- drivers/watchdog/iTCO_wdt.c | 4 ++-- drivers/watchdog/ib700wdt.c | 4 ++-- drivers/watchdog/ibmasr.c | 4 ++-- drivers/watchdog/imx2_wdt.c | 4 ++-- drivers/watchdog/indydog.c | 4 ++-- drivers/watchdog/iop_wdt.c | 4 ++-- drivers/watchdog/it8712f_wdt.c | 4 ++-- drivers/watchdog/it87_wdt.c | 4 ++-- drivers/watchdog/ixp2000_wdt.c | 4 ++-- drivers/watchdog/ixp4xx_wdt.c | 4 ++-- drivers/watchdog/ks8695_wdt.c | 4 ++-- drivers/watchdog/lantiq_wdt.c | 4 ++-- drivers/watchdog/m54xx_wdt.c | 4 ++-- drivers/watchdog/machzwd.c | 4 ++-- drivers/watchdog/max63xx_wdt.c | 4 ++-- drivers/watchdog/mixcomwd.c | 4 ++-- drivers/watchdog/mpc8xxx_wdt.c | 4 ++-- drivers/watchdog/mpcore_wdt.c | 4 ++-- drivers/watchdog/mv64x60_wdt.c | 4 ++-- drivers/watchdog/nuc900_wdt.c | 4 ++-- drivers/watchdog/nv_tco.c | 4 ++-- drivers/watchdog/octeon-wdt-main.c | 4 ++-- drivers/watchdog/orion_wdt.c | 4 ++-- drivers/watchdog/pc87413_wdt.c | 4 ++-- drivers/watchdog/pcwd.c | 4 ++-- drivers/watchdog/pcwd_pci.c | 4 ++-- drivers/watchdog/pcwd_usb.c | 4 ++-- drivers/watchdog/pika_wdt.c | 4 ++-- drivers/watchdog/pnx4008_wdt.c | 4 ++-- drivers/watchdog/pnx833x_wdt.c | 4 ++-- drivers/watchdog/rc32434_wdt.c | 4 ++-- drivers/watchdog/s3c2410_wdt.c | 4 ++-- drivers/watchdog/sbc60xxwdt.c | 4 ++-- drivers/watchdog/sbc7240_wdt.c | 4 ++-- drivers/watchdog/sbc8360.c | 4 ++-- drivers/watchdog/sbc_epx_c3.c | 4 ++-- drivers/watchdog/sbc_fitpc2_wdt.c | 4 ++-- drivers/watchdog/sc1200wdt.c | 4 ++-- drivers/watchdog/sc520_wdt.c | 4 ++-- drivers/watchdog/sch311x_wdt.c | 4 ++-- drivers/watchdog/scx200_wdt.c | 4 ++-- drivers/watchdog/shwdt.c | 4 ++-- drivers/watchdog/smsc37b787_wdt.c | 4 ++-- drivers/watchdog/softdog.c | 4 ++-- drivers/watchdog/sp5100_tco.c | 4 ++-- drivers/watchdog/sp805_wdt.c | 4 ++-- drivers/watchdog/stmp3xxx_wdt.c | 2 +- drivers/watchdog/ts72xx_wdt.c | 4 ++-- drivers/watchdog/twl4030_wdt.c | 4 ++-- drivers/watchdog/txx9wdt.c | 4 ++-- drivers/watchdog/via_wdt.c | 4 ++-- drivers/watchdog/w83627hf_wdt.c | 4 ++-- drivers/watchdog/w83697hf_wdt.c | 4 ++-- drivers/watchdog/w83697ug_wdt.c | 4 ++-- drivers/watchdog/w83877f_wdt.c | 4 ++-- drivers/watchdog/w83977f_wdt.c | 4 ++-- drivers/watchdog/wafer5823wdt.c | 4 ++-- drivers/watchdog/wdrtas.c | 2 +- drivers/watchdog/wdt.c | 4 ++-- drivers/watchdog/wdt977.c | 4 ++-- drivers/watchdog/wdt_pci.c | 4 ++-- drivers/watchdog/wm831x_wdt.c | 4 ++-- drivers/watchdog/wm8350_wdt.c | 4 ++-- include/linux/watchdog.h | 2 +- 86 files changed, 169 insertions(+), 169 deletions(-) (limited to 'include/linux') diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 34767a6d7f4..020a6aec2d8 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -153,7 +153,7 @@ #endif static DEFINE_MUTEX(ipmi_watchdog_mutex); -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static ipmi_user_t watchdog_user; static int watchdog_ifnum; @@ -320,7 +320,7 @@ module_param(start_now, int, 0444); MODULE_PARM_DESC(start_now, "Set to 1 to start the watchdog as" "soon as the driver is loaded."); -module_param(nowayout, int, 0644); +module_param(nowayout, bool, 0644); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=CONFIG_WATCHDOG_NOWAYOUT)"); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 8305d29459b..519ce8b9c14 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -53,8 +53,8 @@ static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* Insmod parameters */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 834e49d1827..d6b0bdd4865 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -71,8 +71,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes. 2<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 8947ccd71ef..4397881c83f 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -93,8 +93,8 @@ static int wdt_start = 0x443; module_param(wdt_start, int, 0); MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index 986258a0667..72e81058176 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -78,8 +78,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index e802f5e0241..41b84936a52 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -40,8 +40,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0 < timeout < 18000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index e90f4ce3279..b9e9558ab21 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -78,8 +78,8 @@ static unsigned long wdt_is_open; static char wdt_expect_close; static struct pci_dev *alim7101_pmu; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 2df16eb9d6d..639ae9a23fb 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -52,8 +52,8 @@ static int margin = 60; module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); #define READ_REG(x) readl((void __iomem *)&(x)) diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 4ca5d40304b..2896430ce42 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -45,8 +45,8 @@ MODULE_PARM_DESC(timeout, "Timeout value. Limited to be 1 or 2 seconds. (default=" __MODULE_STRING(TIMEOUT_DEFAULT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 3ecd246d2cf..ad12c203044 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -30,14 +30,14 @@ #define WDT_MAX_TIME 256 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index cf39847bbad..05e1be85fde 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -62,8 +62,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c index 3bb49fd8d38..1f9371f49c4 100644 --- a/drivers/watchdog/ath79_wdt.c +++ b/drivers/watchdog/ath79_wdt.c @@ -47,8 +47,8 @@ #define WDOG_CTRL_ACTION_NMI 2 /* NMI */ #define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c index 1989e179db1..bc0e91e78e8 100644 --- a/drivers/watchdog/bcm47xx_wdt.c +++ b/drivers/watchdog/bcm47xx_wdt.c @@ -35,14 +35,14 @@ #define WDT_MAX_TIME 255 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c index af95b386d8f..8379dc32fd9 100644 --- a/drivers/watchdog/bcm63xx_wdt.c +++ b/drivers/watchdog/bcm63xx_wdt.c @@ -52,8 +52,8 @@ static struct { static int expect_close; static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 402e9ccea39..38bc383e067 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -49,7 +49,7 @@ #define WATCHDOG_TIMEOUT 20 static unsigned int timeout = WATCHDOG_TIMEOUT; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static const struct watchdog_info bfin_wdt_info; static unsigned long open_check; static char expect_close; @@ -472,7 +472,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c index 78a6827f7de..06de1211a44 100644 --- a/drivers/watchdog/dw_wdt.c +++ b/drivers/watchdog/dw_wdt.c @@ -46,8 +46,8 @@ /* The maximum TOP (timeout period) value that can be set in the watchdog. */ #define DW_WDT_MAX_TOP 15 -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index a6532b52c45..8caa3164270 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -39,7 +39,7 @@ /* default timeout (secs) */ #define WDT_TIMEOUT 30 -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static int timeout = WDT_TIMEOUT; static struct timer_list timer; @@ -237,7 +237,7 @@ static void __exit ep93xx_wdt_exit(void) module_init(ep93xx_wdt_init); module_exit(ep93xx_wdt_exit); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); module_param(timeout, int, 0); diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index 22d967a5ac8..0c60af14ac6 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -78,8 +78,8 @@ static char *ev = "int"; #define WDT_TIMEOUT 60 /* 1 minute */ -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index d95203be37a..17f4cae770c 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c @@ -70,8 +70,8 @@ static unsigned int bus_clk; static char expect_close; static DEFINE_SPINLOCK(gef_wdt_spinlock); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 19044a39c40..dc563b680ab 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -40,8 +40,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 54c64f56af2..cbc7ceef278 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -47,7 +47,7 @@ static unsigned int soft_margin = DEFAULT_MARGIN; /* in seconds */ static unsigned int reload; /* the computed soft_margin */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static char expect_release; static unsigned long hpwdt_is_open; @@ -874,7 +874,7 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(soft_margin, int, 0); MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index 15548e62275..738032a36bc 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -95,8 +95,8 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1 #include -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned long wdt_status; static unsigned long boot_status; static DEFINE_SPINLOCK(wdt_lock); @@ -253,7 +253,7 @@ static void __exit iop_wdt_exit(void) module_init(iop_wdt_init); module_exit(iop_wdt_exit); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_AUTHOR("Curt E Bruns "); diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index ebd1793b956..f4cce6d66a5 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -48,8 +48,8 @@ static int margin = 60; /* in seconds */ module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static unsigned long wdt_open; diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c index 86b368857ce..405ae7be7c6 100644 --- a/drivers/watchdog/it87_wdt.c +++ b/drivers/watchdog/it87_wdt.c @@ -143,7 +143,7 @@ static int nogameport = DEFAULT_NOGAMEPORT; static int exclusive = DEFAULT_EXCLUSIVE; static int timeout = DEFAULT_TIMEOUT; static int testmode = DEFAULT_TESTMODE; -static int nowayout = DEFAULT_NOWAYOUT; +static bool nowayout = DEFAULT_NOWAYOUT; module_param(nogameport, int, 0); MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" @@ -157,7 +157,7 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" module_param(testmode, int, 0); MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" __MODULE_STRING(DEFAULT_TESTMODE)); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" __MODULE_STRING(WATCHDOG_NOWAYOUT)); diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index fc603c5558f..3f047a58d3a 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -31,7 +31,7 @@ #include #include -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static DEFINE_SPINLOCK(wdt_lock); @@ -207,7 +207,7 @@ MODULE_DESCRIPTION("IXP2000 Network Processor Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 792f95cfac8..5580b4fff7f 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -27,7 +27,7 @@ #include #include -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static unsigned long boot_status; @@ -204,7 +204,7 @@ MODULE_DESCRIPTION("IXP4xx Network Processor Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 4ee0c7119b4..59e75d9a6b7 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -30,14 +30,14 @@ #define WDT_MAX_TIME 171 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #endif diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c index 83044351042..a9593a3a32a 100644 --- a/drivers/watchdog/lantiq_wdt.c +++ b/drivers/watchdog/lantiq_wdt.c @@ -40,7 +40,7 @@ #define LTQ_WDT_DIVIDER 0x40000 #define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static void __iomem *ltq_wdt_membase; static unsigned long ltq_io_region_clk_rate; @@ -251,7 +251,7 @@ exit_ltq_wdt(void) module_init(init_ltq_wdt); module_exit(exit_ltq_wdt); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_AUTHOR("John Crispin "); diff --git a/drivers/watchdog/m54xx_wdt.c b/drivers/watchdog/m54xx_wdt.c index 88e6c8ba417..663cad86c63 100644 --- a/drivers/watchdog/m54xx_wdt.c +++ b/drivers/watchdog/m54xx_wdt.c @@ -34,7 +34,7 @@ #include #include -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int heartbeat = 30; /* (secs) Default is 0.5 minute */ static unsigned long wdt_status; @@ -220,7 +220,7 @@ MODULE_DESCRIPTION("Coldfire M54xx Watchdog"); module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 30s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index a2ecc965692..52ed8834ced 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -95,8 +95,8 @@ MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c index af63ecfbfa6..c9e9ff2a9c9 100644 --- a/drivers/watchdog/max63xx_wdt.c +++ b/drivers/watchdog/max63xx_wdt.c @@ -34,7 +34,7 @@ #define MAX_HEARTBEAT 60 static int heartbeat = DEFAULT_HEARTBEAT; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* * Memory mapping: a single byte, 3 first lower bits to select bit 3 @@ -375,7 +375,7 @@ MODULE_PARM_DESC(heartbeat, __MODULE_STRING(MAX_HEARTBEAT) ", default " __MODULE_STRING(DEFAULT_HEARTBEAT)); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c index 17ec5b9dddd..37e4b52dbce 100644 --- a/drivers/watchdog/mixcomwd.c +++ b/drivers/watchdog/mixcomwd.c @@ -108,8 +108,8 @@ static int mixcomwd_timer_alive; static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun, 0, 0); static char expect_close; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 3e335fa0f17..40f7bf1f865 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -62,8 +62,8 @@ module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index a7de5f6bf68..9e83f333b25 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -57,8 +57,8 @@ MODULE_PARM_DESC(mpcore_margin, "MPcore timer margin in seconds. (0 < mpcore_margin < 65536, default=" __MODULE_STRING(TIMER_MARGIN) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index ee0f828bb34..c53d025e70d 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -60,8 +60,8 @@ static unsigned int bus_clk; static char expect_close; static DEFINE_SPINLOCK(mv64x60_wdt_spinlock); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c index 529085b8b8f..ea4c7448b75 100644 --- a/drivers/watchdog/nuc900_wdt.c +++ b/drivers/watchdog/nuc900_wdt.c @@ -55,8 +55,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/nv_tco.c b/drivers/watchdog/nv_tco.c index 16d9413a81c..6bbb9efc612 100644 --- a/drivers/watchdog/nv_tco.c +++ b/drivers/watchdog/nv_tco.c @@ -61,8 +61,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned int margin = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static DEFINE_MUTEX(wdt_lock); @@ -260,7 +260,7 @@ MODULE_DESCRIPTION("SBC-FITPC2 Watchdog"); module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); MODULE_LICENSE("GPL"); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 0698b3d794e..3fb83b0c28c 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -93,8 +93,8 @@ MODULE_PARM_DESC(io, "io port"); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index e975b335438..d1ef58579a3 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -97,8 +97,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1 <= timeout <= 3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c index 1702c3e9bce..bd86f32d63a 100644 --- a/drivers/watchdog/sch311x_wdt.c +++ b/drivers/watchdog/sch311x_wdt.c @@ -80,8 +80,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=15300, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index 35ada2e9066..8ae7c282d46 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -43,8 +43,8 @@ static int margin = 60; /* in seconds */ module_param(margin, int, 0); MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static u16 wdto_restart; diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index 75bd2392647..93958a7763e 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -75,7 +75,7 @@ static DEFINE_SPINLOCK(shwdt_lock); #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; static unsigned long next_heartbeat; struct sh_wdt { @@ -484,7 +484,7 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 5e4d3734b51..4c3400574ad 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -86,7 +86,7 @@ static char expect_close; /* is the close expected? */ static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* -- Low level function ----------------------------------------*/ @@ -615,7 +615,7 @@ MODULE_PARM_DESC(unit, module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index a1adc8c8783..da8620f829b 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -59,8 +59,8 @@ MODULE_PARM_DESC(soft_margin, "Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default=" __MODULE_STRING(TIMER_MARGIN) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 954a7b6334c..59108e48ada 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -62,8 +62,8 @@ module_param(heartbeat, int, 0); MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started" " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c index 2b0939ab61d..49b615a29c4 100644 --- a/drivers/watchdog/sp805_wdt.c +++ b/drivers/watchdog/sp805_wdt.c @@ -79,7 +79,7 @@ struct sp805_wdt { /* local variables */ static struct sp805_wdt *wdt; -static int nowayout = WATCHDOG_NOWAYOUT; +static bool nowayout = WATCHDOG_NOWAYOUT; /* This routine finds load value that will reset system in required timout */ static void wdt_setload(unsigned int timeout) @@ -405,7 +405,7 @@ static struct amba_driver sp805_wdt_driver = { module_amba_driver(sp805_wdt_driver); -module_param(nowayout, int, 0); +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Set to 1 to keep watchdog running after device release"); diff --git a/drivers/watchdog/stmp3xxx_wdt.c b/drivers/watchdog/stmp3xxx_wdt.c index 180941375ce..21d96b92bfd 100644 --- a/drivers/watchdog/stmp3xxx_wdt.c +++ b/drivers/watchdog/stmp3xxx_wdt.c @@ -35,7 +35,7 @@ static DEFINE_SPINLOCK(stmp3xxx_wdt_io_lock); static unsigned long wdt_status; -static const int nowayout = WATCHDOG_NOWAYOUT; +static const bool nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = DEFAULT_HEARTBEAT; static unsigned long boot_status; diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 1490293dc7d..8df050d800e 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -34,8 +34,8 @@ MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. " __MODULE_STRING(TS72XX_WDT_DEFAULT_TIMEOUT) ")"); -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); /** diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c index 0764c6239b9..249f11305d2 100644 --- a/drivers/watchdog/twl4030_wdt.c +++ b/drivers/watchdog/twl4030_wdt.c @@ -42,8 +42,8 @@ struct twl4030_wdt { unsigned long state; }; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 99204a80869..d02804ccd28 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -33,8 +33,8 @@ MODULE_PARM_DESC(timeout, "(0 #include -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c index f18499eaeaa..cdd2efc6d6b 100644 --- a/drivers/watchdog/wm8350_wdt.c +++ b/drivers/watchdog/wm8350_wdt.c @@ -21,8 +21,8 @@ #include #include -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index 43ba5b3ce2a..de75167093b 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -127,7 +127,7 @@ struct watchdog_device { #endif /* Use the following function to set the nowayout feature */ -static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout) +static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool nowayout) { if (nowayout) set_bit(WDOG_NO_WAY_OUT, &wdd->status); -- cgit v1.2.3-70-g09d2 From fd7b673c92731fc6c0b1e999adfd87b6762ee797 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 16 Mar 2012 09:14:00 +0100 Subject: watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core This patch adds support for WDIOC_GETTIMELEFT IOCTL in watchdog core. So, there is another function pointer added to struct watchdog_ops, which can be passed by drivers to support this IOCTL. Related documentation is updated too. Signed-off-by: Viresh Kumar Signed-off-by: Linus Walleij Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/convert_drivers_to_kernel_api.txt | 4 ++++ Documentation/watchdog/watchdog-kernel-api.txt | 4 +++- drivers/watchdog/watchdog_dev.c | 5 +++++ include/linux/watchdog.h | 2 ++ 4 files changed, 14 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.txt b/Documentation/watchdog/convert_drivers_to_kernel_api.txt index be8119bb15d..271b8850dde 100644 --- a/Documentation/watchdog/convert_drivers_to_kernel_api.txt +++ b/Documentation/watchdog/convert_drivers_to_kernel_api.txt @@ -59,6 +59,10 @@ Here is a overview of the functions and probably needed actions: WDIOC_GETTIMEOUT: No preparations needed + WDIOC_GETTIMELEFT: + It needs get_timeleft() callback to be defined. Otherwise it + will return EOPNOTSUPP + Other IOCTLs can be served using the ioctl-callback. Note that this is mainly intended for porting old drivers; new drivers should not invent private IOCTLs. Private IOCTLs are processed first. When the callback returns with diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index 7d9d1da762b..227f6cd0e5f 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -1,6 +1,6 @@ The Linux WatchDog Timer Driver Core kernel API. =============================================== -Last reviewed: 29-Nov-2011 +Last reviewed: 16-Mar-2012 Wim Van Sebroeck @@ -77,6 +77,7 @@ struct watchdog_ops { int (*ping)(struct watchdog_device *); unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); + unsigned int (*get_timeleft)(struct watchdog_device *); long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); }; @@ -123,6 +124,7 @@ they are supported. These optional routines/operations are: because the watchdog does not necessarily has a 1 second resolution). (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the watchdog's info structure). +* get_timeleft: this routines returns the time that's left before a reset. * ioctl: if this routine is present then it will be called first before we do our own internal ioctl call handling. This routine should return -ENOIOCTLCMD if a command is not supported. The parameters that are passed to the ioctl diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index c6e1b8dd80c..8558da912c4 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -236,6 +236,11 @@ static long watchdog_ioctl(struct file *file, unsigned int cmd, if (wdd->timeout == 0) return -EOPNOTSUPP; return put_user(wdd->timeout, p); + case WDIOC_GETTIMELEFT: + if (!wdd->ops->get_timeleft) + return -EOPNOTSUPP; + + return put_user(wdd->ops->get_timeleft(wdd), p); default: return -ENOTTY; } diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index de75167093b..ac40716b44e 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -66,6 +66,7 @@ struct watchdog_device; * @ping: The routine that sends a keepalive ping to the watchdog device. * @status: The routine that shows the status of the watchdog device. * @set_timeout:The routine for setting the watchdog devices timeout value. + * @get_timeleft:The routine that get's the time that's left before a reset. * @ioctl: The routines that handles extra ioctl calls. * * The watchdog_ops structure contains a list of low-level operations @@ -82,6 +83,7 @@ struct watchdog_ops { int (*ping)(struct watchdog_device *); unsigned int (*status)(struct watchdog_device *); int (*set_timeout)(struct watchdog_device *, unsigned int); + unsigned int (*get_timeleft)(struct watchdog_device *); long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); }; -- cgit v1.2.3-70-g09d2 From 2a0352fa4a78081c76be1e450b51a6aa27c92616 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Tue, 20 Mar 2012 21:30:27 +0000 Subject: powerpc/eeh: Remove eeh device from OF node Originally, the PCI sensitive OF node is tracing the eeh device through struct device_node->edev. However, it was regarded as bad idea. The patch removes struct device_node->edev and uses PCI_DN to trace the corresponding eeh device according to BenH's comments. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/pci-bridge.h | 8 ++++++++ arch/powerpc/platforms/pseries/eeh_dev.c | 2 +- include/linux/of.h | 10 ---------- 3 files changed, 9 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 5d487657322..21f99aec41b 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -155,6 +155,7 @@ struct pci_dn { struct pci_dev *pcidev; /* back-pointer to the pci device */ #ifdef CONFIG_EEH + struct eeh_dev *edev; /* eeh device */ int class_code; /* pci device class */ int eeh_mode; /* See eeh.h for possible EEH_MODEs */ int eeh_config_addr; @@ -185,6 +186,13 @@ static inline int pci_device_from_OF_node(struct device_node *np, return 0; } +#if defined(CONFIG_EEH) +static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn) +{ + return PCI_DN(dn)->edev; +} +#endif + /** Find the bus corresponding to the indicated device node */ extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); diff --git a/arch/powerpc/platforms/pseries/eeh_dev.c b/arch/powerpc/platforms/pseries/eeh_dev.c index f3aed7dcae9..c4507d09590 100644 --- a/arch/powerpc/platforms/pseries/eeh_dev.c +++ b/arch/powerpc/platforms/pseries/eeh_dev.c @@ -62,7 +62,7 @@ void * __devinit eeh_dev_init(struct device_node *dn, void *data) } /* Associate EEH device with OF node */ - dn->edev = edev; + PCI_DN(dn)->edev = edev; edev->dn = dn; edev->phb = phb; diff --git a/include/linux/of.h b/include/linux/of.h index d46a18ffbeb..f02d8b2f799 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -58,9 +58,6 @@ struct device_node { struct kref kref; unsigned long _flags; void *data; -#if defined(CONFIG_EEH) - struct eeh_dev *edev; -#endif #if defined(CONFIG_SPARC) char *path_component_name; unsigned int unique_id; @@ -75,13 +72,6 @@ struct of_phandle_args { uint32_t args[MAX_PHANDLE_ARGS]; }; -#if defined(CONFIG_EEH) -static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn) -{ - return dn->edev; -} -#endif - #ifdef CONFIG_OF_DYNAMIC extern struct device_node *of_node_get(struct device_node *node); extern void of_node_put(struct device_node *node); -- cgit v1.2.3-70-g09d2 From 09e79d6ea65d66e0a5e9ba76865320e74832dc7c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 26 Mar 2012 22:52:00 +0000 Subject: eql: dont rely on HZ=100 HZ is more likely to be 1000 these days. timer handlers are run from softirq, no need to disable bh skb priority 1 is TC_PRIO_FILLER Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/eql.c | 7 ++++--- include/linux/if_eql.h | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/drivers/net/eql.c b/drivers/net/eql.c index a59cf961a43..f219d38acf5 100644 --- a/drivers/net/eql.c +++ b/drivers/net/eql.c @@ -125,6 +125,7 @@ #include #include #include +#include #include @@ -143,7 +144,7 @@ static void eql_timer(unsigned long param) equalizer_t *eql = (equalizer_t *) param; struct list_head *this, *tmp, *head; - spin_lock_bh(&eql->queue.lock); + spin_lock(&eql->queue.lock); head = &eql->queue.all_slaves; list_for_each_safe(this, tmp, head) { slave_t *slave = list_entry(this, slave_t, list); @@ -157,7 +158,7 @@ static void eql_timer(unsigned long param) } } - spin_unlock_bh(&eql->queue.lock); + spin_unlock(&eql->queue.lock); eql->timer.expires = jiffies + EQL_DEFAULT_RESCHED_IVAL; add_timer(&eql->timer); @@ -341,7 +342,7 @@ static netdev_tx_t eql_slave_xmit(struct sk_buff *skb, struct net_device *dev) struct net_device *slave_dev = slave->dev; skb->dev = slave_dev; - skb->priority = 1; + skb->priority = TC_PRIO_FILLER; slave->bytes_queued += skb->len; dev_queue_xmit(skb); dev->stats.tx_packets++; diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h index 79c4f268410..18a5d02a864 100644 --- a/include/linux/if_eql.h +++ b/include/linux/if_eql.h @@ -22,7 +22,7 @@ #define EQL_DEFAULT_SLAVE_PRIORITY 28800 #define EQL_DEFAULT_MAX_SLAVES 4 #define EQL_DEFAULT_MTU 576 -#define EQL_DEFAULT_RESCHED_IVAL 100 +#define EQL_DEFAULT_RESCHED_IVAL HZ #define EQL_ENSLAVE (SIOCDEVPRIVATE) #define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1) -- cgit v1.2.3-70-g09d2 From 613c4578d4079a14dbee76ef7e0c80f635522fe3 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 28 Mar 2012 16:36:27 +0200 Subject: common: dma-mapping: introduce generic alloc() and free() methods Introduce new generic alloc and free methods with attributes argument. Existing alloc_coherent and free_coherent can be implemented on top of the new calls with NULL attributes argument. Later also dma_alloc_non_coherent can be implemented using DMA_ATTR_NONCOHERENT attribute as well as dma_alloc_writecombine with separate DMA_ATTR_WRITECOMBINE attribute. This way the drivers will get more generic, platform independent way of allocating dma buffers with specific parameters. Signed-off-by: Marek Szyprowski Acked-by: Kyungmin Park Reviewed-by: David Gibson Reviewed-by: Arnd Bergmann --- include/linux/dma-mapping.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index e13117cbd2f..8cc7f95289a 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -13,6 +13,12 @@ struct dma_map_ops { dma_addr_t *dma_handle, gfp_t gfp); void (*free_coherent)(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); + void* (*alloc)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs); + void (*free)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs); dma_addr_t (*map_page)(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, -- cgit v1.2.3-70-g09d2 From 645ae3bce3e62541f8dc2701dde2a2791d842b6c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 21 Dec 2011 16:55:57 +0100 Subject: common: dma-mapping: remove old alloc_coherent and free_coherent methods Remove old, unused alloc_coherent and free_coherent methods from dma_map_ops structure. Signed-off-by: Marek Szyprowski Acked-by: Kyungmin Park Reviewed-by: Arnd Bergmann --- include/linux/dma-mapping.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 8cc7f95289a..2fc413a873e 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -9,10 +9,6 @@ #include struct dma_map_ops { - void* (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); void* (*alloc)(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs); -- cgit v1.2.3-70-g09d2 From 9adc537452e1e341cabd39a02d4788d3c510b0e2 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 21 Dec 2011 16:55:33 +0100 Subject: common: dma-mapping: introduce mmap method Introduce new generic mmap method with attributes argument. This method lets drivers to create a userspace mapping for a DMA buffer in generic, architecture independent way. Signed-off-by: Marek Szyprowski Acked-by: Kyungmin Park Reviewed-by: Arnd Bergmann --- include/linux/dma-mapping.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 2fc413a873e..b903a20867f 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -15,6 +15,9 @@ struct dma_map_ops { void (*free)(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs); + int (*mmap)(struct device *, struct vm_area_struct *, + void *, dma_addr_t, size_t, struct dma_attrs *attrs); + dma_addr_t (*map_page)(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, -- cgit v1.2.3-70-g09d2 From 8a4134322bd429d24f71147eb59a47a981e8f63a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 23 Dec 2011 09:30:47 +0100 Subject: common: DMA-mapping: add WRITE_COMBINE attribute DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be buffered to improve performance. It will be used by the replacement for ARM/ARV32 specific dma_alloc_writecombine() function. Signed-off-by: Marek Szyprowski Acked-by: Kyungmin Park Reviewed-by: Arnd Bergmann --- Documentation/DMA-attributes.txt | 10 ++++++++++ include/linux/dma-attrs.h | 1 + 2 files changed, 11 insertions(+) (limited to 'include/linux') diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index b768cc0e402..811a5d458da 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -31,3 +31,13 @@ may be weakly ordered, that is that reads and writes may pass each other. Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING, those that do not will simply ignore the attribute and exhibit default behavior. + +DMA_ATTR_WRITE_COMBINE +---------------------- + +DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be +buffered to improve performance. + +Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE, +those that do not will simply ignore the attribute and exhibit default +behavior. diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h index 71ad34eca6e..ada61e1abf2 100644 --- a/include/linux/dma-attrs.h +++ b/include/linux/dma-attrs.h @@ -13,6 +13,7 @@ enum dma_attr { DMA_ATTR_WRITE_BARRIER, DMA_ATTR_WEAK_ORDERING, + DMA_ATTR_WRITE_COMBINE, DMA_ATTR_MAX, }; -- cgit v1.2.3-70-g09d2 From 64d70fe5d3640e1a89790ed21120921278f8cb86 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 28 Mar 2012 07:55:56 +0200 Subject: common: DMA-mapping: add NON-CONSISTENT attribute DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either consistent or non-consistent memory as it sees fit. By using this API, you are guaranteeing to the platform that you have all the correct and necessary sync points for this memory in the driver. Signed-off-by: Marek Szyprowski Acked-by: Kyungmin Park Reviewed-by: Arnd Bergmann --- Documentation/DMA-attributes.txt | 8 ++++++++ include/linux/dma-attrs.h | 1 + 2 files changed, 9 insertions(+) (limited to 'include/linux') diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt index 811a5d458da..5c72eed8956 100644 --- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -41,3 +41,11 @@ buffered to improve performance. Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE, those that do not will simply ignore the attribute and exhibit default behavior. + +DMA_ATTR_NON_CONSISTENT +----------------------- + +DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either +consistent or non-consistent memory as it sees fit. By using this API, +you are guaranteeing to the platform that you have all the correct and +necessary sync points for this memory in the driver. diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h index ada61e1abf2..547ab568d3a 100644 --- a/include/linux/dma-attrs.h +++ b/include/linux/dma-attrs.h @@ -14,6 +14,7 @@ enum dma_attr { DMA_ATTR_WRITE_BARRIER, DMA_ATTR_WEAK_ORDERING, DMA_ATTR_WRITE_COMBINE, + DMA_ATTR_NON_CONSISTENT, DMA_ATTR_MAX, }; -- cgit v1.2.3-70-g09d2 From 49a7f04a4b9d45cd794741ce3d5d66524b37bdd0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 28 Mar 2012 18:30:03 +0100 Subject: Move all declarations of free_initmem() to linux/mm.h Move all declarations of free_initmem() to linux/mm.h so that there's only one and it's used by everything. Signed-off-by: David Howells cc: linux-c6x-dev@linux-c6x.org cc: microblaze-uclinux@itee.uq.edu.au cc: linux-sh@vger.kernel.org cc: sparclinux@vger.kernel.org cc: x86@kernel.org cc: linux-mm@kvack.org --- arch/c6x/include/asm/system.h | 1 - arch/frv/include/asm/system.h | 2 -- arch/microblaze/include/asm/system.h | 1 - arch/sh/include/asm/system.h | 1 - arch/sparc/mm/init_64.h | 2 -- arch/x86/include/asm/page_types.h | 1 - include/linux/mm.h | 2 ++ init/main.c | 1 - 8 files changed, 2 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/arch/c6x/include/asm/system.h b/arch/c6x/include/asm/system.h index ccc4f86d16c..0d84f9e42fd 100644 --- a/arch/c6x/include/asm/system.h +++ b/arch/c6x/include/asm/system.h @@ -4,4 +4,3 @@ #include #include #include -extern void free_initmem(void); diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h index 5c707a23540..659bcdb44ec 100644 --- a/arch/frv/include/asm/system.h +++ b/arch/frv/include/asm/system.h @@ -1,6 +1,4 @@ -/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */ #include #include #include #include -extern void free_initmem(void); diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index ccc4f86d16c..0d84f9e42fd 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -4,4 +4,3 @@ #include #include #include -extern void free_initmem(void); diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h index e2042aa32f2..04268aa3b3e 100644 --- a/arch/sh/include/asm/system.h +++ b/arch/sh/include/asm/system.h @@ -6,4 +6,3 @@ #include #include #include -void free_initmem(void); diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h index 77d1b313e34..3e1ac8b96ca 100644 --- a/arch/sparc/mm/init_64.h +++ b/arch/sparc/mm/init_64.h @@ -36,8 +36,6 @@ extern unsigned long kern_locked_tte_data; extern void prom_world(int enter); -extern void free_initmem(void); - #ifdef CONFIG_SPARSEMEM_VMEMMAP #define VMEMMAP_CHUNK_SHIFT 22 #define VMEMMAP_CHUNK (1UL << VMEMMAP_CHUNK_SHIFT) diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h index bce688d54c1..e21fdd10479 100644 --- a/arch/x86/include/asm/page_types.h +++ b/arch/x86/include/asm/page_types.h @@ -55,7 +55,6 @@ extern unsigned long init_memory_mapping(unsigned long start, unsigned long end); extern void initmem_init(void); -extern void free_initmem(void); #endif /* !__ASSEMBLY__ */ diff --git a/include/linux/mm.h b/include/linux/mm.h index 7330742e797..69f6d7b7eb0 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1257,6 +1257,8 @@ static inline void pgtable_page_dtor(struct page *page) extern void free_area_init(unsigned long * zones_size); extern void free_area_init_node(int nid, unsigned long * zones_size, unsigned long zone_start_pfn, unsigned long *zholes_size); +extern void free_initmem(void); + #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP /* * With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its diff --git a/init/main.c b/init/main.c index c24805c824b..44c9754e2a5 100644 --- a/init/main.c +++ b/init/main.c @@ -87,7 +87,6 @@ extern void mca_init(void); extern void sbus_init(void); extern void prio_tree_init(void); extern void radix_tree_init(void); -extern void free_initmem(void); #ifndef CONFIG_DEBUG_RODATA static inline void mark_rodata_ro(void) { } #endif -- cgit v1.2.3-70-g09d2 From 96f951edb1f1bdbbc99b0cd458f9808bb83d58ae Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 28 Mar 2012 18:30:03 +0100 Subject: Add #includes needed to permit the removal of asm/system.h asm/system.h is a cause of circular dependency problems because it contains commonly used primitive stuff like barrier definitions and uncommonly used stuff like switch_to() that might require MMU definitions. asm/system.h has been disintegrated by this point on all arches into the following common segments: (1) asm/barrier.h Moved memory barrier definitions here. (2) asm/cmpxchg.h Moved xchg() and cmpxchg() here. #included in asm/atomic.h. (3) asm/bug.h Moved die() and similar here. (4) asm/exec.h Moved arch_align_stack() here. (5) asm/elf.h Moved AT_VECTOR_SIZE_ARCH here. (6) asm/switch_to.h Moved switch_to() here. Signed-off-by: David Howells --- drivers/misc/sgi-gru/gru_instructions.h | 1 + drivers/staging/crystalhd/bc_dts_defs.h | 2 ++ fs/binfmt_elf.c | 1 + fs/binfmt_elf_fdpic.c | 1 + fs/exec.c | 1 + include/asm-generic/bitops/atomic.h | 2 +- include/linux/llist.h | 3 +-- include/linux/mtd/map.h | 1 + include/linux/spinlock.h | 1 + kernel/sched/core.c | 1 + 10 files changed, 11 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h index d95587cc794..04d5170ac14 100644 --- a/drivers/misc/sgi-gru/gru_instructions.h +++ b/drivers/misc/sgi-gru/gru_instructions.h @@ -40,6 +40,7 @@ extern void gru_wait_abort_proc(void *cb); *((volatile unsigned long *)(p)) = v; /* force st.rel */ \ } while (0) #elif defined(CONFIG_X86_64) +#include #define __flush_cache(p) clflush(p) #define gru_ordered_store_ulong(p, v) \ do { \ diff --git a/drivers/staging/crystalhd/bc_dts_defs.h b/drivers/staging/crystalhd/bc_dts_defs.h index 8cd51a7aad8..647e116e10d 100644 --- a/drivers/staging/crystalhd/bc_dts_defs.h +++ b/drivers/staging/crystalhd/bc_dts_defs.h @@ -26,6 +26,8 @@ #ifndef _BC_DTS_DEFS_H_ #define _BC_DTS_DEFS_H_ +#include + /* BIT Mask */ #define BC_BIT(_x) (1 << (_x)) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 81878b78c9d..18276531f7c 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -35,6 +35,7 @@ #include #include #include +#include static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs); static int load_elf_library(struct file *); diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index c64bf5ee2df..9bd5612a822 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -39,6 +39,7 @@ #include #include #include +#include typedef char *elf_caddr_t; diff --git a/fs/exec.c b/fs/exec.c index 23559c227d9..c8b63d14da8 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -59,6 +59,7 @@ #include #include #include +#include #include #include "internal.h" diff --git a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h index ecc44a8e2b4..9ae6c34dc19 100644 --- a/include/asm-generic/bitops/atomic.h +++ b/include/asm-generic/bitops/atomic.h @@ -2,7 +2,7 @@ #define _ASM_GENERIC_BITOPS_ATOMIC_H_ #include -#include +#include #ifdef CONFIG_SMP #include diff --git a/include/linux/llist.h b/include/linux/llist.h index 801b44b07aa..a5199f6d0e8 100644 --- a/include/linux/llist.h +++ b/include/linux/llist.h @@ -56,8 +56,7 @@ */ #include -#include -#include +#include struct llist_head { struct llist_node *first; diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 94e924e2ecd..ade5c990f1f 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -31,6 +31,7 @@ #include #include #include +#include #ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 #define map_bankwidth(map) 1 diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 7df6c17b028..fa0f93e4d86 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -55,6 +55,7 @@ #include #include #include +#include #include diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 503d6426126..157fb9b2b18 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -73,6 +73,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 9ffc93f203c18a70623f21950f1dd473c9ec48cd Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 28 Mar 2012 18:30:03 +0100 Subject: Remove all #inclusions of asm/system.h Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*.*\n!!' `grep -Irl '^#\s*include\s*' *` Signed-off-by: David Howells --- arch/um/include/asm/fixmap.h | 1 - drivers/acpi/processor_driver.c | 1 - drivers/atm/eni.c | 1 - drivers/atm/firestream.c | 1 - drivers/atm/horizon.c | 1 - drivers/atm/idt77105.c | 1 - drivers/atm/iphase.c | 1 - drivers/atm/suni.c | 1 - drivers/atm/zatm.c | 1 - drivers/block/floppy.c | 1 - drivers/block/hd.c | 1 - drivers/block/nbd.c | 1 - drivers/block/xd.c | 1 - drivers/bluetooth/bt3c_cs.c | 1 - drivers/bluetooth/btuart_cs.c | 1 - drivers/bluetooth/dtl1_cs.c | 1 - drivers/char/apm-emulation.c | 1 - drivers/char/ds1302.c | 1 - drivers/char/efirtc.c | 1 - drivers/char/genrtc.c | 1 - drivers/char/hpet.c | 1 - drivers/char/ipmi/ipmi_devintf.c | 1 - drivers/char/ipmi/ipmi_msghandler.c | 1 - drivers/char/ipmi/ipmi_si_intf.c | 1 - drivers/char/lp.c | 1 - drivers/char/mbcs.c | 1 - drivers/char/mspec.c | 1 - drivers/char/mwave/3780i.c | 1 - drivers/char/nvram.c | 1 - drivers/char/nwflash.c | 1 - drivers/char/pcmcia/synclink_cs.c | 1 - drivers/char/rtc.c | 1 - drivers/char/sonypi.c | 1 - drivers/char/xilinx_hwicap/xilinx_hwicap.c | 1 - drivers/cpufreq/omap-cpufreq.c | 1 - drivers/cpufreq/powernow-k7.c | 1 - drivers/firewire/core-cdev.c | 1 - drivers/firewire/core-device.c | 1 - drivers/firewire/core-topology.c | 1 - drivers/firewire/ohci.c | 1 - drivers/firewire/sbp2.c | 1 - drivers/i2c/busses/i2c-acorn.c | 1 - drivers/ide/ide-cs.c | 1 - drivers/ide/qd65xx.c | 1 - drivers/infiniband/hw/ehca/ehca_reqs.c | 1 - drivers/input/joydev.c | 1 - drivers/input/joystick/amijoy.c | 1 - drivers/input/mouse/amimouse.c | 1 - drivers/input/mouse/atarimouse.c | 1 - drivers/input/serio/hp_sdc.c | 1 - drivers/input/serio/maceps2.c | 1 - drivers/input/serio/rpckbd.c | 1 - drivers/input/serio/sa1111ps2.c | 1 - drivers/isdn/hardware/avm/avm_cs.c | 1 - drivers/isdn/hisax/avma1_cs.c | 1 - drivers/isdn/hisax/elsa_cs.c | 1 - drivers/isdn/hisax/sedlbauer_cs.c | 1 - drivers/isdn/hisax/teles_cs.c | 1 - drivers/isdn/i4l/isdn_bsdcomp.c | 1 - drivers/isdn/pcbit/layer2.c | 1 - drivers/macintosh/macio-adb.c | 1 - drivers/macintosh/therm_adt746x.c | 1 - drivers/macintosh/therm_pm72.c | 1 - drivers/macintosh/therm_windtunnel.c | 1 - drivers/macintosh/via-cuda.c | 1 - drivers/macintosh/via-macii.c | 1 - drivers/macintosh/via-pmu.c | 1 - drivers/macintosh/via-pmu68k.c | 1 - drivers/macintosh/windfarm_lm75_sensor.c | 1 - drivers/macintosh/windfarm_pm121.c | 1 - drivers/macintosh/windfarm_pm81.c | 1 - drivers/macintosh/windfarm_pm91.c | 1 - drivers/macintosh/windfarm_smu_controls.c | 1 - drivers/macintosh/windfarm_smu_sensors.c | 1 - drivers/media/dvb/dvb-core/dmxdev.c | 1 - drivers/media/dvb/firewire/firedtv-fw.c | 1 - drivers/media/dvb/ttpci/av7110.c | 1 - drivers/media/media-devnode.c | 1 - drivers/media/video/ivtv/ivtv-driver.h | 1 - drivers/media/video/v4l2-common.c | 1 - drivers/media/video/v4l2-dev.c | 1 - drivers/message/i2o/i2o_scsi.c | 1 - drivers/mfd/mcp-core.c | 1 - drivers/mfd/mcp-sa11x0.c | 1 - drivers/misc/sgi-xp/xp.h | 1 - drivers/mmc/card/block.c | 1 - drivers/mtd/devices/pmc551.c | 1 - drivers/mtd/devices/slram.c | 1 - drivers/mtd/maps/pcmciamtd.c | 1 - drivers/mtd/nand/bcm_umi_nand.c | 1 - drivers/net/appletalk/cops.c | 1 - drivers/net/appletalk/ltpc.c | 1 - drivers/net/arcnet/com20020_cs.c | 1 - drivers/net/bonding/bond_main.c | 1 - drivers/net/can/slcan.c | 1 - drivers/net/cris/eth_v10.c | 1 - drivers/net/ethernet/3com/3c574_cs.c | 1 - drivers/net/ethernet/3com/3c589_cs.c | 1 - drivers/net/ethernet/8390/3c503.c | 1 - drivers/net/ethernet/8390/ac3200.c | 1 - drivers/net/ethernet/8390/apne.c | 1 - drivers/net/ethernet/8390/ax88796.c | 1 - drivers/net/ethernet/8390/axnet_cs.c | 1 - drivers/net/ethernet/8390/e2100.c | 1 - drivers/net/ethernet/8390/es3210.c | 1 - drivers/net/ethernet/8390/etherh.c | 1 - drivers/net/ethernet/8390/hp-plus.c | 1 - drivers/net/ethernet/8390/hp.c | 1 - drivers/net/ethernet/8390/lib8390.c | 1 - drivers/net/ethernet/8390/lne390.c | 1 - drivers/net/ethernet/8390/mac8390.c | 1 - drivers/net/ethernet/8390/ne-h8300.c | 1 - drivers/net/ethernet/8390/ne.c | 1 - drivers/net/ethernet/8390/ne2.c | 1 - drivers/net/ethernet/8390/ne2k-pci.c | 1 - drivers/net/ethernet/8390/ne3210.c | 1 - drivers/net/ethernet/8390/pcnet_cs.c | 1 - drivers/net/ethernet/8390/smc-mca.c | 1 - drivers/net/ethernet/8390/smc-ultra.c | 1 - drivers/net/ethernet/8390/smc-ultra32.c | 1 - drivers/net/ethernet/8390/stnic.c | 1 - drivers/net/ethernet/8390/wd.c | 1 - drivers/net/ethernet/8390/zorro8390.c | 1 - drivers/net/ethernet/alteon/acenic.c | 1 - drivers/net/ethernet/amd/7990.c | 1 - drivers/net/ethernet/amd/am79c961a.c | 1 - drivers/net/ethernet/amd/amd8111e.c | 1 - drivers/net/ethernet/amd/declance.c | 1 - drivers/net/ethernet/amd/hplance.c | 1 - drivers/net/ethernet/amd/mvme147.c | 1 - drivers/net/ethernet/amd/nmclan_cs.c | 1 - drivers/net/ethernet/amd/sunlance.c | 1 - drivers/net/ethernet/broadcom/tg3.c | 1 - drivers/net/ethernet/cirrus/cs89x0.c | 1 - drivers/net/ethernet/cirrus/mac89x0.c | 1 - drivers/net/ethernet/dlink/de600.c | 1 - drivers/net/ethernet/dlink/de620.c | 1 - drivers/net/ethernet/fujitsu/at1700.c | 1 - drivers/net/ethernet/fujitsu/eth16i.c | 1 - drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 1 - drivers/net/ethernet/i825xx/3c507.c | 1 - drivers/net/ethernet/i825xx/3c527.c | 1 - drivers/net/ethernet/i825xx/eepro.c | 1 - drivers/net/ethernet/i825xx/eexpress.c | 1 - drivers/net/ethernet/i825xx/ether1.c | 1 - drivers/net/ethernet/i825xx/znet.c | 1 - drivers/net/ethernet/korina.c | 1 - drivers/net/ethernet/marvell/mv643xx_eth.c | 1 - drivers/net/ethernet/marvell/pxa168_eth.c | 1 - drivers/net/ethernet/natsemi/jazzsonic.c | 1 - drivers/net/ethernet/natsemi/macsonic.c | 1 - drivers/net/ethernet/natsemi/ns83820.c | 1 - drivers/net/ethernet/neterion/s2io.c | 1 - drivers/net/ethernet/nvidia/forcedeth.c | 1 - drivers/net/ethernet/realtek/atp.c | 1 - drivers/net/ethernet/realtek/r8169.c | 1 - drivers/net/ethernet/seeq/ether3.c | 1 - drivers/net/ethernet/seeq/seeq8005.c | 1 - drivers/net/ethernet/smsc/smc91c92_cs.c | 1 - drivers/net/ethernet/sun/cassini.c | 1 - drivers/net/ethernet/sun/sunbmac.c | 1 - drivers/net/ethernet/sun/sungem.c | 1 - drivers/net/ethernet/sun/sunhme.c | 1 - drivers/net/ethernet/sun/sunqe.c | 1 - drivers/net/ethernet/tundra/tsi108_eth.c | 1 - drivers/net/ethernet/xircom/xirc2ps_cs.c | 1 - drivers/net/hamradio/6pack.c | 1 - drivers/net/hamradio/baycom_par.c | 1 - drivers/net/hamradio/bpqether.c | 1 - drivers/net/hamradio/mkiss.c | 1 - drivers/net/hamradio/scc.c | 1 - drivers/net/hamradio/yam.c | 1 - drivers/net/hippi/rrunner.c | 1 - drivers/net/irda/donauboe.c | 1 - drivers/net/loopback.c | 1 - drivers/net/plip/plip.c | 1 - drivers/net/slip/slhc.c | 1 - drivers/net/slip/slip.c | 1 - drivers/net/tokenring/3c359.c | 1 - drivers/net/tokenring/abyss.c | 1 - drivers/net/tokenring/ibmtr_cs.c | 1 - drivers/net/tokenring/lanstreamer.c | 1 - drivers/net/tokenring/madgemc.c | 1 - drivers/net/tokenring/olympic.c | 1 - drivers/net/tokenring/proteon.c | 1 - drivers/net/tokenring/skisa.c | 1 - drivers/net/tokenring/smctr.c | 1 - drivers/net/tokenring/tms380tr.c | 1 - drivers/net/tokenring/tmspci.c | 1 - drivers/net/tun.c | 1 - drivers/net/wan/dlci.c | 1 - drivers/net/wan/dscc4.c | 1 - drivers/net/wan/hd64570.c | 1 - drivers/net/wan/hd64572.c | 1 - drivers/net/wan/lapbether.c | 1 - drivers/net/wan/sdla.c | 1 - drivers/net/wan/x25_asy.c | 1 - drivers/net/wireless/airo.c | 1 - drivers/net/wireless/airo_cs.c | 1 - drivers/net/wireless/atmel.c | 1 - drivers/net/wireless/atmel_cs.c | 1 - drivers/net/wireless/prism54/islpci_mgt.c | 1 - drivers/net/wireless/ray_cs.c | 1 - drivers/net/wireless/wl3501_cs.c | 1 - drivers/nubus/nubus.c | 1 - drivers/parisc/dino.c | 1 - drivers/parisc/iosapic.c | 1 - drivers/parisc/lba_pci.c | 1 - drivers/pcmcia/cs.c | 1 - drivers/pcmcia/i82092.c | 1 - drivers/pcmcia/i82365.c | 1 - drivers/pcmcia/m32r_cfc.c | 1 - drivers/pcmcia/m32r_pcc.c | 1 - drivers/pcmcia/m8xx_pcmcia.c | 1 - drivers/pcmcia/pd6729.c | 1 - drivers/pcmcia/pxa2xx_base.c | 1 - drivers/pcmcia/sa11xx_base.c | 1 - drivers/pcmcia/soc_common.c | 1 - drivers/pcmcia/socket_sysfs.c | 1 - drivers/pcmcia/tcic.c | 1 - drivers/pcmcia/xxs1500_ss.c | 1 - drivers/pnp/pnpbios/bioscalls.c | 1 - drivers/pnp/pnpbios/core.c | 1 - drivers/s390/crypto/ap_bus.c | 1 - drivers/sbus/char/flash.c | 1 - drivers/sbus/char/openprom.c | 1 - drivers/sbus/char/uctrl.c | 1 - drivers/scsi/53c700.c | 1 - drivers/scsi/BusLogic.c | 1 - drivers/scsi/advansys.c | 1 - drivers/scsi/aha152x.c | 1 - drivers/scsi/aha1542.c | 1 - drivers/scsi/aha1740.c | 1 - drivers/scsi/arcmsr/arcmsr_hba.c | 1 - drivers/scsi/arm/acornscsi.c | 1 - drivers/scsi/arm/cumana_1.c | 1 - drivers/scsi/arm/oak.c | 1 - drivers/scsi/atp870u.c | 1 - drivers/scsi/dtc.c | 1 - drivers/scsi/fd_mcs.c | 1 - drivers/scsi/fdomain.c | 1 - drivers/scsi/g_NCR5380.c | 1 - drivers/scsi/gdth.c | 1 - drivers/scsi/ibmmca.c | 1 - drivers/scsi/in2000.c | 1 - drivers/scsi/mac53c94.c | 1 - drivers/scsi/mac_scsi.c | 1 - drivers/scsi/mesh.c | 1 - drivers/scsi/ncr53c8xx.c | 1 - drivers/scsi/nsp32.c | 1 - drivers/scsi/osst.c | 1 - drivers/scsi/pas16.c | 1 - drivers/scsi/qla1280.c | 1 - drivers/scsi/qlogicpti.c | 1 - drivers/scsi/st.c | 1 - drivers/scsi/sun3_scsi.c | 1 - drivers/scsi/sun3_scsi_vme.c | 1 - drivers/scsi/sym53c416.c | 1 - drivers/scsi/t128.c | 1 - drivers/scsi/u14-34f.c | 1 - drivers/scsi/ultrastor.c | 1 - drivers/scsi/wd7000.c | 1 - drivers/spi/spi-omap-uwire.c | 1 - drivers/staging/comedi/drivers.c | 1 - drivers/staging/comedi/drivers/cb_pcidas64.c | 1 - drivers/staging/comedi/drivers/mite.c | 1 - drivers/staging/crystalhd/crystalhd.h | 1 - drivers/staging/crystalhd/crystalhd_lnx.h | 1 - drivers/staging/crystalhd/crystalhd_misc.h | 1 + drivers/staging/et131x/et131x.c | 1 - drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 1 - drivers/staging/media/go7007/go7007-driver.c | 1 - drivers/staging/media/go7007/go7007-i2c.c | 1 - drivers/staging/media/go7007/go7007-v4l2.c | 1 - drivers/staging/media/go7007/snd-go7007.c | 1 - drivers/staging/media/lirc/lirc_serial.c | 1 - drivers/staging/media/lirc/lirc_sir.c | 1 - drivers/staging/panel/panel.c | 1 - drivers/staging/sbe-2t3e3/io.c | 1 - drivers/staging/telephony/phonedev.c | 1 - drivers/staging/tidspbridge/include/dspbridge/host_os.h | 1 - drivers/staging/wlags49_h2/wl_cs.c | 1 - drivers/staging/wlags49_h2/wl_main.c | 3 +-- drivers/staging/wlags49_h2/wl_netdev.c | 3 +-- drivers/staging/wlags49_h2/wl_pci.c | 1 - drivers/staging/wlags49_h2/wl_util.c | 3 +-- drivers/tty/amiserial.c | 1 - drivers/tty/isicom.c | 1 - drivers/tty/moxa.c | 1 - drivers/tty/mxser.c | 1 - drivers/tty/n_hdlc.c | 1 - drivers/tty/n_tty.c | 1 - drivers/tty/pty.c | 1 - drivers/tty/serial/68328serial.c | 1 - drivers/tty/serial/8250/serial_cs.c | 1 - drivers/tty/serial/crisv10.c | 1 - drivers/tty/serial/dz.c | 1 - drivers/tty/serial/icom.c | 1 - drivers/tty/serial/msm_serial_hs.c | 1 - drivers/tty/serial/zs.c | 1 - drivers/tty/synclink.c | 1 - drivers/tty/synclink_gt.c | 1 - drivers/tty/synclinkmp.c | 1 - drivers/tty/tty_io.c | 1 - drivers/tty/tty_ioctl.c | 1 - drivers/tty/vt/vt.c | 1 - drivers/usb/gadget/amd5536udc.c | 1 - drivers/usb/gadget/at91_udc.c | 1 - drivers/usb/gadget/dummy_hcd.c | 1 - drivers/usb/gadget/fsl_udc_core.c | 1 - drivers/usb/gadget/goku_udc.c | 1 - drivers/usb/gadget/langwell_udc.c | 1 - drivers/usb/gadget/mv_udc_core.c | 1 - drivers/usb/gadget/net2272.c | 1 - drivers/usb/gadget/net2280.c | 1 - drivers/usb/gadget/omap_udc.c | 1 - drivers/usb/gadget/printer.c | 1 - drivers/usb/gadget/pxa25x_udc.c | 1 - drivers/usb/gadget/rndis.c | 1 - drivers/usb/gadget/s3c2410_udc.c | 1 - drivers/usb/host/ehci-hcd.c | 1 - drivers/usb/host/isp116x-hcd.c | 1 - drivers/usb/host/isp1362-hcd.c | 1 - drivers/usb/host/ohci-hcd.c | 1 - drivers/usb/host/oxu210hp-hcd.c | 1 - drivers/usb/host/sl811-hcd.c | 1 - drivers/usb/host/u132-hcd.c | 1 - drivers/usb/host/uhci-hcd.c | 1 - drivers/video/amifb.c | 1 - drivers/video/bt431.h | 1 - drivers/video/bt455.h | 1 - drivers/video/console/fbcon.c | 1 - drivers/video/console/newport_con.c | 1 - drivers/video/cyber2000fb.c | 1 - drivers/video/dnfb.c | 1 - drivers/video/neofb.c | 1 - drivers/video/pmag-ba-fb.c | 1 - drivers/video/pmagb-b-fb.c | 1 - drivers/video/q40fb.c | 1 - drivers/video/savage/savagefb_driver.c | 1 - drivers/virtio/config.c | 1 - drivers/watchdog/advantechwdt.c | 1 - drivers/watchdog/alim7101_wdt.c | 1 - drivers/watchdog/booke_wdt.c | 1 - drivers/watchdog/eurotechwdt.c | 1 - drivers/watchdog/ib700wdt.c | 1 - drivers/watchdog/it87_wdt.c | 1 - drivers/watchdog/machzwd.c | 1 - drivers/watchdog/pc87413_wdt.c | 1 - drivers/watchdog/sbc60xxwdt.c | 1 - drivers/watchdog/sbc7240_wdt.c | 1 - drivers/watchdog/sbc8360.c | 1 - drivers/watchdog/sbc_fitpc2_wdt.c | 1 - drivers/watchdog/sc520_wdt.c | 1 - drivers/watchdog/smsc37b787_wdt.c | 1 - drivers/watchdog/w83627hf_wdt.c | 1 - drivers/watchdog/w83697hf_wdt.c | 1 - drivers/watchdog/w83697ug_wdt.c | 1 - drivers/watchdog/w83877f_wdt.c | 1 - drivers/watchdog/w83977f_wdt.c | 1 - drivers/watchdog/wdt.c | 1 - drivers/watchdog/wdt977.c | 1 - drivers/watchdog/wdt_pci.c | 1 - fs/binfmt_aout.c | 1 - fs/binfmt_flat.c | 1 - fs/coda/inode.c | 1 - fs/coda/psdev.c | 1 - fs/coda/upcall.c | 1 - fs/eventpoll.c | 1 - fs/jbd2/commit.c | 1 - fs/jbd2/journal.c | 1 - fs/ncpfs/file.c | 1 - fs/ncpfs/inode.c | 1 - fs/ncpfs/mmap.c | 1 - fs/nfs/client.c | 1 - fs/nfs/direct.c | 1 - fs/nfs/file.c | 1 - fs/nfs/getroot.c | 1 - fs/nfs/inode.c | 1 - fs/nfs/read.c | 1 - fs/nfs/super.c | 1 - fs/proc/inode.c | 1 - fs/reiserfs/journal.c | 1 - fs/ufs/inode.c | 1 - fs/ufs/super.c | 1 - fs/xfs/xfs_buf.h | 1 - include/acpi/platform/aclinux.h | 1 - include/asm-generic/atomic.h | 1 - include/linux/cnt32_to_63.h | 1 - include/linux/debug_locks.h | 1 - include/linux/efi.h | 1 - include/linux/ide.h | 1 - include/linux/interrupt.h | 1 - include/linux/lsm_audit.h | 1 - include/linux/mtd/map.h | 1 - include/linux/parport.h | 1 - include/linux/rwsem.h | 1 - include/linux/sched.h | 1 - include/linux/skbuff.h | 1 - include/linux/spinlock.h | 1 - include/linux/stop_machine.h | 1 - include/linux/tty.h | 1 - include/linux/wait.h | 1 - kernel/debug/debug_core.c | 1 - kernel/debug/kdb/kdb_bt.c | 1 - kernel/dma.c | 1 - kernel/kexec.c | 1 - kernel/rwsem.c | 1 - kernel/sysctl.c | 1 - lib/llist.c | 1 - lib/raid6/altivec.uc | 1 - net/802/fc.c | 1 - net/802/fddi.c | 1 - net/802/hippi.c | 1 - net/802/tr.c | 1 - net/atm/clip.c | 1 - net/ax25/af_ax25.c | 1 - net/ax25/ax25_addr.c | 1 - net/ax25/ax25_dev.c | 1 - net/ax25/ax25_ds_in.c | 1 - net/ax25/ax25_ds_subr.c | 1 - net/ax25/ax25_ds_timer.c | 1 - net/ax25/ax25_iface.c | 1 - net/ax25/ax25_in.c | 1 - net/ax25/ax25_ip.c | 1 - net/ax25/ax25_out.c | 1 - net/ax25/ax25_route.c | 1 - net/ax25/ax25_std_in.c | 1 - net/ax25/ax25_std_subr.c | 1 - net/ax25/ax25_std_timer.c | 1 - net/ax25/ax25_subr.c | 1 - net/ax25/ax25_timer.c | 1 - net/ax25/ax25_uid.c | 1 - net/bluetooth/bnep/sock.c | 1 - net/bluetooth/cmtp/sock.c | 1 - net/bluetooth/hci_conn.c | 1 - net/bluetooth/hci_core.c | 1 - net/bluetooth/hci_event.c | 1 - net/bluetooth/hci_sock.c | 1 - net/bluetooth/l2cap_core.c | 1 - net/bluetooth/rfcomm/sock.c | 1 - net/bluetooth/sco.c | 1 - net/core/datagram.c | 1 - net/core/dev.c | 1 - net/core/filter.c | 1 - net/core/gen_estimator.c | 1 - net/core/rtnetlink.c | 1 - net/core/scm.c | 1 - net/core/skbuff.c | 1 - net/core/sock.c | 1 - net/core/utils.c | 1 - net/decnet/af_decnet.c | 1 - net/decnet/dn_dev.c | 1 - net/decnet/dn_nsp_in.c | 1 - net/decnet/dn_nsp_out.c | 1 - net/econet/af_econet.c | 1 - net/ethernet/eth.c | 1 - net/ipv4/af_inet.c | 1 - net/ipv4/arp.c | 1 - net/ipv4/devinet.c | 1 - net/ipv4/fib_frontend.c | 1 - net/ipv4/fib_semantics.c | 1 - net/ipv4/fib_trie.c | 1 - net/ipv4/icmp.c | 1 - net/ipv4/igmp.c | 1 - net/ipv4/ip_input.c | 1 - net/ipv4/ip_output.c | 1 - net/ipv4/ipmr.c | 1 - net/ipv4/ping.c | 1 - net/ipv4/route.c | 1 - net/ipv4/udp.c | 1 - net/ipv6/af_inet6.c | 1 - net/ipv6/icmp.c | 1 - net/ipv6/ip6mr.c | 1 - net/irda/irlan/irlan_client.c | 1 - net/irda/irlan/irlan_common.c | 1 - net/irda/irlan/irlan_provider.c | 1 - net/irda/timer.c | 1 - net/lapb/lapb_iface.c | 1 - net/lapb/lapb_in.c | 1 - net/lapb/lapb_out.c | 1 - net/lapb/lapb_subr.c | 1 - net/lapb/lapb_timer.c | 1 - net/netfilter/ipvs/ip_vs_app.c | 1 - net/netfilter/ipvs/ip_vs_proto.c | 1 - net/netfilter/nfnetlink.c | 1 - net/netrom/af_netrom.c | 1 - net/netrom/nr_dev.c | 1 - net/netrom/nr_in.c | 1 - net/netrom/nr_out.c | 1 - net/netrom/nr_route.c | 1 - net/netrom/nr_subr.c | 1 - net/netrom/nr_timer.c | 1 - net/openvswitch/datapath.c | 1 - net/packet/af_packet.c | 1 - net/rose/af_rose.c | 1 - net/rose/rose_dev.c | 1 - net/rose/rose_in.c | 1 - net/rose/rose_link.c | 1 - net/rose/rose_out.c | 1 - net/rose/rose_route.c | 1 - net/rose/rose_subr.c | 1 - net/rose/rose_timer.c | 1 - net/sunrpc/clnt.c | 1 - security/selinux/include/avc.h | 1 - sound/oss/os.h | 1 - sound/oss/vidc.c | 1 - sound/oss/waveartist.c | 1 - sound/pci/asihpi/hpios.h | 1 - sound/pci/aw2/aw2-saa7146.c | 1 - 510 files changed, 4 insertions(+), 512 deletions(-) (limited to 'include/linux') diff --git a/arch/um/include/asm/fixmap.h b/arch/um/include/asm/fixmap.h index 69c0252345f..21a423bae5e 100644 --- a/arch/um/include/asm/fixmap.h +++ b/arch/um/include/asm/fixmap.h @@ -2,7 +2,6 @@ #define __UM_FIXMAP_H #include -#include #include #include #include diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 2801b418d7b..d4d9cb7e016 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -46,7 +46,6 @@ #include #include -#include #include #include #include diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c index 6ff612d099c..2059ee460b0 100644 --- a/drivers/atm/eni.c +++ b/drivers/atm/eni.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 5072f8ac16f..86fed1b9169 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -49,7 +49,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index b81210330ac..75fd691cd43 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -43,7 +43,6 @@ #include #include -#include #include #include #include diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index 487a5473985..45d506363ab 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 9e373ba2030..d4386019af5 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -56,7 +56,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c index 90f1ccca9e5..02159345566 100644 --- a/drivers/atm/suni.c +++ b/drivers/atm/suni.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index d889f56e8d8..abe4e20b076 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 744f078f4dd..76a08236430 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -202,7 +202,6 @@ static int slow_floppy; #include #include -#include static int FLOPPY_IRQ = 6; static int FLOPPY_DMA = 2; diff --git a/drivers/block/hd.c b/drivers/block/hd.c index b52c9ca146f..bf397bf108b 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -44,7 +44,6 @@ #define HD_IRQ 14 #define REALLY_SLOW_IO -#include #include #include diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index c3f0ee16594..c7ba11f9b20 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -34,7 +34,6 @@ #include #include -#include #include #include diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 51a972704db..ff540520bad 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -52,7 +52,6 @@ #include #include -#include #include #include diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 9c09d6f05dc..308c8599ab5 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 194224d07f7..c4fc2f3fc32 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index 049c0594a76..6e8d9618968 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index f4837a893df..57501ca9204 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -31,7 +31,6 @@ #include #include -#include /* * The apm_bios device is one of the misc char devices. diff --git a/drivers/char/ds1302.c b/drivers/char/ds1302.c index ed8303f9890..7d34b203718 100644 --- a/drivers/char/ds1302.c +++ b/drivers/char/ds1302.c @@ -24,7 +24,6 @@ #include #include -#include #include #if defined(CONFIG_M32R) #include diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c index 53c524e7b82..a082d00b0f1 100644 --- a/drivers/char/efirtc.c +++ b/drivers/char/efirtc.c @@ -37,7 +37,6 @@ #include #include -#include #define EFI_RTC_VERSION "0.4" diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c index f773a9dd14f..21cb980f115 100644 --- a/drivers/char/genrtc.c +++ b/drivers/char/genrtc.c @@ -56,7 +56,6 @@ #include #include -#include #include /* diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 0833896cf6f..3845ab44c33 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -36,7 +36,6 @@ #include #include -#include #include #include diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 2aa3977aae5..9eb360ff8ca 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 58c0e6387cf..c90e9390b78 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -33,7 +33,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 50fcf9c0456..f9fdc114b31 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/lp.c b/drivers/char/lp.c index f4348560706..0fbf1a776b5 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -135,7 +135,6 @@ #include #include -#include /* if you have more than 8 printers, remember to increase LP_NO */ #define LP_NO 8 diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c index 1aeaaba680d..47ff7e470d8 100644 --- a/drivers/char/mbcs.c +++ b/drivers/char/mbcs.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 5c0d96a820f..8b78750f1ef 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c index 492dbfb2efd..881c9e59593 100644 --- a/drivers/char/mwave/3780i.c +++ b/drivers/char/mwave/3780i.c @@ -56,7 +56,6 @@ #include #include -#include #include #include "smapi.h" #include "mwavedd.h" diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index eaade8a1ecd..9df78e2cc45 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -111,7 +111,6 @@ #include #include -#include static DEFINE_MUTEX(nvram_mutex); static DEFINE_SPINLOCK(nvram_state_lock); diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index bf586ae1ee8..d45c3345b4a 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -32,7 +32,6 @@ #include #include #include -#include #include /*****************************************************************************/ diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index f6453df4921..0a484b4a1b0 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -60,7 +60,6 @@ #include #include -#include #include #include #include diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 872e09a02d2..af9437488b6 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -83,7 +83,6 @@ #include #include -#include #ifdef CONFIG_X86 #include diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 1ee8ce7d276..45713f0e7d6 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -54,7 +54,6 @@ #include #include -#include #include diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index e90e1c74fd4..31ba11ca75e 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -89,7 +89,6 @@ #include #include -#include #ifdef CONFIG_OF /* For open firmware. */ diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 5d04c57aae3..3093ca6152c 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -26,7 +26,6 @@ #include #include -#include #include #include diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index cf7e1ee005a..334cc2f1e9f 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -27,7 +27,6 @@ #include /* Needed for recalibrate_cpu_khz() */ #include -#include #include #ifdef CONFIG_X86_POWERNOW_K7_ACPI diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c index 22c6df5f136..2e6b24547e2 100644 --- a/drivers/firewire/core-cdev.c +++ b/drivers/firewire/core-cdev.c @@ -44,7 +44,6 @@ #include #include -#include #include "core.h" diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c index afa7c83bd11..68109e9bb04 100644 --- a/drivers/firewire/core-device.c +++ b/drivers/firewire/core-device.c @@ -40,7 +40,6 @@ #include #include -#include #include "core.h" diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c index 255646ffc35..0de83508f32 100644 --- a/drivers/firewire/core-topology.c +++ b/drivers/firewire/core-topology.c @@ -31,7 +31,6 @@ #include #include -#include #include "core.h" diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 187b3f2e797..2b5460075a9 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -46,7 +46,6 @@ #include #include -#include #ifdef CONFIG_PPC_PMAC #include diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 000a29ffeda..b7e65d7eab6 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -52,7 +52,6 @@ #include #include -#include #include #include diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 86796488ef4..ed9f48d566d 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -19,7 +19,6 @@ #include #include -#include #define FORCE_ONES 0xdc #define SCL 0x02 diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index d2f3db3cf3e..28e344ea514 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 8bbfe5557c7..e03f4f19c1d 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #define DRV_NAME "qd65xx" diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index 9a3fbfca9b4..fd05f48f6b0 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -42,7 +42,6 @@ */ -#include #include "ehca_classes.h" #include "ehca_tools.h" #include "ehca_qes.h" diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index c24ec2d5f92..26043cc6a01 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -13,7 +13,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include -#include #include #include #include diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c index 0bc86204213..24044dacbf7 100644 --- a/drivers/input/joystick/amijoy.c +++ b/drivers/input/joystick/amijoy.c @@ -35,7 +35,6 @@ #include #include -#include #include #include diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index ff5f61a0fd3..5fa99341a39 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -25,7 +25,6 @@ #include #include -#include #include #include #include diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c index 5c4a692bf73..d1c43236b12 100644 --- a/drivers/input/mouse/atarimouse.c +++ b/drivers/input/mouse/atarimouse.c @@ -47,7 +47,6 @@ #include #include -#include #include #include #include diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index be3316073ae..09a089996de 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -71,7 +71,6 @@ #include #include #include -#include /* Machine-specific abstraction */ diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c index 558200e96d0..61da763b120 100644 --- a/drivers/input/serio/maceps2.c +++ b/drivers/input/serio/maceps2.c @@ -21,7 +21,6 @@ #include #include -#include #include #include diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 8b44ddc8041..d8aac177307 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c @@ -39,7 +39,6 @@ #include #include #include -#include MODULE_AUTHOR("Vojtech Pavlik, Russell King"); MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver"); diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 44fc8b4bcd8..e3c85fafe93 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -20,7 +20,6 @@ #include #include -#include #include diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 44b50cc645e..c21353d8e91 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 33e3c94887d..c644557ae61 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index fe254e74a85..a8c4d3fc9a6 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 68f50495d16..f0dfc0c976e 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index bfe94284b0d..4deac451807 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include diff --git a/drivers/isdn/i4l/isdn_bsdcomp.c b/drivers/isdn/i4l/isdn_bsdcomp.c index 7f3c54d4047..c59e8d2c067 100644 --- a/drivers/isdn/i4l/isdn_bsdcomp.c +++ b/drivers/isdn/i4l/isdn_bsdcomp.c @@ -69,7 +69,6 @@ #include /* used in new tty drivers */ #include -#include #include #include diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c index 682911f8113..a18e639b40d 100644 --- a/drivers/isdn/pcbit/layer2.c +++ b/drivers/isdn/pcbit/layer2.c @@ -36,7 +36,6 @@ #include -#include #include diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c index b6ef8f59076..87de8d9bcfa 100644 --- a/drivers/macintosh/macio-adb.c +++ b/drivers/macintosh/macio-adb.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index c60d025044e..fc71723cbc4 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #undef DEBUG diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 0ff92c20800..97cfc5ac9fd 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -127,7 +127,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 46c4e95f10d..3b4a157714b 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index 971bc9582a5..86511c570dd 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -26,7 +26,6 @@ #include #endif #include -#include #include static volatile unsigned char __iomem *via; diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index c9570fcf1cc..3725f088f17 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -34,7 +34,6 @@ #include #include #include -#include static volatile unsigned char *via; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 6cccd60c594..22b8ce4191c 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index aeb30d07d5a..a00ee41f057 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -37,7 +37,6 @@ #include #include -#include #include #include diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index 647c6add219..4d6a90a1372 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c index 30e6195e19d..04067e073aa 100644 --- a/drivers/macintosh/windfarm_pm121.c +++ b/drivers/macintosh/windfarm_pm121.c @@ -215,7 +215,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c index 749d174b0dc..fc13d0f2663 100644 --- a/drivers/macintosh/windfarm_pm81.c +++ b/drivers/macintosh/windfarm_pm81.c @@ -107,7 +107,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c index 34427323512..a9430ed4f36 100644 --- a/drivers/macintosh/windfarm_pm91.c +++ b/drivers/macintosh/windfarm_pm91.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c index 43137b421f9..3c2be5193fd 100644 --- a/drivers/macintosh/windfarm_smu_controls.c +++ b/drivers/macintosh/windfarm_smu_controls.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c index 3c193504bb8..1cc4e4953d8 100644 --- a/drivers/macintosh/windfarm_smu_sensors.c +++ b/drivers/macintosh/windfarm_smu_sensors.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index e4b5c03ae51..73970cd97af 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -29,7 +29,6 @@ #include #include #include -#include #include "dmxdev.h" static int debug; diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c index 864b6274c72..e24ec539a5f 100644 --- a/drivers/media/dvb/firewire/firedtv-fw.c +++ b/drivers/media/dvb/firewire/firedtv-fw.c @@ -20,7 +20,6 @@ #include #include -#include #include diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 6ecbcf61487..4bd8bd56bef 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -53,7 +53,6 @@ #include #include -#include #include diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c index 7b42ace419d..04d6d541d86 100644 --- a/drivers/media/media-devnode.c +++ b/drivers/media/media-devnode.c @@ -40,7 +40,6 @@ #include #include #include -#include #include diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 06f3d78389b..52d5dd71032 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -54,7 +54,6 @@ #include #include #include -#include #include #include diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 5c6100fb407..1baec839330 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -55,7 +55,6 @@ #include #endif #include -#include #include #include #include diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 96e9615663e..8546f812944 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index c8ed7b63fdf..1d31d7284cb 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -57,7 +57,6 @@ #include #include -#include #include #include diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 86cc3f7841c..32c82de81ad 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -20,7 +20,6 @@ #include #include -#include #define to_mcp(d) container_of(d, struct mcp, attached_device) diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 02c53a0766c..4a27c2b9a89 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 851b2f25ce0..c862cd4583c 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -25,7 +25,6 @@ #endif #if defined CONFIG_IA64 -#include #include /* defines is_shub1() and is_shub2() */ #define is_shub() ia64_platform_is("sn2") #endif diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index e5a3c7b6ded..4c3b2847e47 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -41,7 +41,6 @@ #include #include -#include #include #include "queue.h" diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index ecff765579d..5d53c5760a6 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -93,7 +93,6 @@ #include #include #include -#include #include #include diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index e585263161b..288594163c2 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -42,7 +42,6 @@ #include #include #include -#include #include diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index e8e9fec2355..0259cf58302 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 50387fd4009..64c9cbaf86a 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -31,7 +31,6 @@ #include #include -#include #include #include diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 9abd4eb86dc..dd5e04813b7 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -70,7 +70,6 @@ static const char *version = #include #include -#include #include #include diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 6057b30417a..0910dce3996 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -229,7 +229,6 @@ static int dma; #include #include -#include #include #include diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c index 980e65c1493..5bed4c4e250 100644 --- a/drivers/net/arcnet/com20020_cs.c +++ b/drivers/net/arcnet/com20020_cs.c @@ -47,7 +47,6 @@ #include #include -#include #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n" diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 0730203a19f..d6e85864bee 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -54,7 +54,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 98a5a7d867f..034c16b60e9 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -40,7 +40,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 7cb2785e209..ec03b401620 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -35,7 +35,6 @@ #include /* CRIS_LED_* I/O functions */ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c index e61b2f82ba3..66df9363808 100644 --- a/drivers/net/ethernet/3com/3c574_cs.c +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -95,7 +95,6 @@ earlier 3Com products. #include #include -#include /*====================================================================*/ diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c index b23253b9f74..a556c01e011 100644 --- a/drivers/net/ethernet/3com/3c589_cs.c +++ b/drivers/net/ethernet/3com/3c589_cs.c @@ -50,7 +50,6 @@ #include #include -#include /* To minimize the size of the driver source I only define operating constants if they are used several times. You'll need the manual diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c index fbab1367505..49d76bd0dc8 100644 --- a/drivers/net/ethernet/8390/3c503.c +++ b/drivers/net/ethernet/8390/3c503.c @@ -54,7 +54,6 @@ static const char version[] = #include #include -#include #include #include "8390.h" diff --git a/drivers/net/ethernet/8390/ac3200.c b/drivers/net/ethernet/8390/ac3200.c index 5337dd0a59b..ccf07942ff6 100644 --- a/drivers/net/ethernet/8390/ac3200.c +++ b/drivers/net/ethernet/8390/ac3200.c @@ -34,7 +34,6 @@ static const char version[] = #include #include -#include #include #include diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 3ad5d2f9a49..923959275a8 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -39,7 +39,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index c30adcc9828..11476ca95e9 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -31,7 +31,6 @@ #include -#include /* Rename the lib8390.c functions to show that they are in this driver */ #define __ei_open ax_ei_open diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c index c5bd8eb7a9f..e1b3941bd14 100644 --- a/drivers/net/ethernet/8390/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -46,7 +46,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c index d16dc53c181..ed55ce85ebb 100644 --- a/drivers/net/ethernet/8390/e2100.c +++ b/drivers/net/ethernet/8390/e2100.c @@ -48,7 +48,6 @@ static const char version[] = #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/es3210.c b/drivers/net/ethernet/8390/es3210.c index 6428f9e7a55..ba1b5c95531 100644 --- a/drivers/net/ethernet/8390/es3210.c +++ b/drivers/net/ethernet/8390/es3210.c @@ -59,7 +59,6 @@ static const char version[] = #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c index a45b0d8a9f1..dbefd5658c1 100644 --- a/drivers/net/ethernet/8390/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -45,7 +45,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c index d42938b6b59..52f70f999c0 100644 --- a/drivers/net/ethernet/8390/hp-plus.c +++ b/drivers/net/ethernet/8390/hp-plus.c @@ -33,7 +33,6 @@ static const char version[] = #include #include -#include #include #include "8390.h" diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c index 113f1e075a2..37fa89aa457 100644 --- a/drivers/net/ethernet/8390/hp.c +++ b/drivers/net/ethernet/8390/hp.c @@ -33,7 +33,6 @@ static const char version[] = #include #include -#include #include #include "8390.h" diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c index e77f624e819..b329f5c0d62 100644 --- a/drivers/net/ethernet/8390/lib8390.c +++ b/drivers/net/ethernet/8390/lib8390.c @@ -57,7 +57,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/8390/lne390.c b/drivers/net/ethernet/8390/lne390.c index 69490ae018e..479409bf2e3 100644 --- a/drivers/net/ethernet/8390/lne390.c +++ b/drivers/net/ethernet/8390/lne390.c @@ -46,7 +46,6 @@ static const char *version = #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index af5d9822cad..88ccc8b14f0 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -37,7 +37,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/8390/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c index 9b9c77d5a65..7fc28f2d28a 100644 --- a/drivers/net/ethernet/8390/ne-h8300.c +++ b/drivers/net/ethernet/8390/ne-h8300.c @@ -29,7 +29,6 @@ static const char version1[] = #include #include -#include #include #include diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index f92ea2a65a5..d04911d33b6 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -53,7 +53,6 @@ static const char version2[] = #include #include -#include #include #include "8390.h" diff --git a/drivers/net/ethernet/8390/ne2.c b/drivers/net/ethernet/8390/ne2.c index 922b32036c6..ef85839f43d 100644 --- a/drivers/net/ethernet/8390/ne2.c +++ b/drivers/net/ethernet/8390/ne2.c @@ -76,7 +76,6 @@ static const char *version = "ne2.c:v0.91 Nov 16 1998 Wim Dumon #include -#include #include #include diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index 3fab04a0034..5e8845febfb 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -54,7 +54,6 @@ static int options[MAX_UNITS]; #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c index 2a3e8057fea..a2f8b2b8e27 100644 --- a/drivers/net/ethernet/8390/ne3210.c +++ b/drivers/net/ethernet/8390/ne3210.c @@ -39,7 +39,6 @@ #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c index f2a4e5de18c..de1af0bfed4 100644 --- a/drivers/net/ethernet/8390/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -49,7 +49,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/8390/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c index 77efec44fea..7a68590f280 100644 --- a/drivers/net/ethernet/8390/smc-mca.c +++ b/drivers/net/ethernet/8390/smc-mca.c @@ -47,7 +47,6 @@ #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index 1cc306a83ff..b0fbce39661 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -69,7 +69,6 @@ static const char version[] = #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c index bb87053eb3d..923e42aedcf 100644 --- a/drivers/net/ethernet/8390/smc-ultra32.c +++ b/drivers/net/ethernet/8390/smc-ultra32.c @@ -57,7 +57,6 @@ static const char *version = "smc-ultra32.c: 06/97 v1.00\n"; #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c index 3b903759980..8df4c415723 100644 --- a/drivers/net/ethernet/8390/stnic.c +++ b/drivers/net/ethernet/8390/stnic.c @@ -17,7 +17,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index c175fadb597..03eb3eed49f 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -39,7 +39,6 @@ static const char version[] = #include #include -#include #include "8390.h" diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c index bcd27323b20..7818e6397e9 100644 --- a/drivers/net/ethernet/8390/zorro8390.c +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/alteon/acenic.c b/drivers/net/ethernet/alteon/acenic.c index 6c3b1c0adaa..7219123fa0a 100644 --- a/drivers/net/ethernet/alteon/acenic.c +++ b/drivers/net/ethernet/alteon/acenic.c @@ -78,7 +78,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/amd/7990.c b/drivers/net/ethernet/amd/7990.c index 1b046f58d58..6e722dc37db 100644 --- a/drivers/net/ethernet/amd/7990.c +++ b/drivers/net/ethernet/amd/7990.c @@ -33,7 +33,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c index cc7b9e46780..e10ffad525a 100644 --- a/drivers/net/ethernet/amd/am79c961a.c +++ b/drivers/net/ethernet/amd/am79c961a.c @@ -30,7 +30,6 @@ #include #include -#include #define TX_BUFFERS 15 #define RX_BUFFERS 25 diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c index 9f62504d008..64d0d9c1afa 100644 --- a/drivers/net/ethernet/amd/amd8111e.c +++ b/drivers/net/ethernet/amd/amd8111e.c @@ -88,7 +88,6 @@ Revision History: #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c index 7dc508e5c72..75299f500ee 100644 --- a/drivers/net/ethernet/amd/declance.c +++ b/drivers/net/ethernet/amd/declance.c @@ -64,7 +64,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/amd/hplance.c b/drivers/net/ethernet/amd/hplance.c index 4e2d68a4de8..8baff4e5d96 100644 --- a/drivers/net/ethernet/amd/hplance.c +++ b/drivers/net/ethernet/amd/hplance.c @@ -22,7 +22,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/amd/mvme147.c b/drivers/net/ethernet/amd/mvme147.c index 56bc47a9418..9af3c307862 100644 --- a/drivers/net/ethernet/amd/mvme147.c +++ b/drivers/net/ethernet/amd/mvme147.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c index ebdb9e238a8..9f59bf63514 100644 --- a/drivers/net/ethernet/amd/nmclan_cs.c +++ b/drivers/net/ethernet/amd/nmclan_cs.c @@ -154,7 +154,6 @@ Include Files #include #include -#include /* ---------------------------------------------------------------------------- Defines diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c index e3fe3504e19..d7a3533d990 100644 --- a/drivers/net/ethernet/amd/sunlance.c +++ b/drivers/net/ethernet/amd/sunlance.c @@ -95,7 +95,6 @@ static char lancestr[] = "LANCE"; #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index b0657466041..a374f278834 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -48,7 +48,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index d5ff93653e4..98c171b3a45 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -148,7 +148,6 @@ #include #include -#include #include #include #if ALLOW_DMA diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c index 932fdccc339..e285f384b09 100644 --- a/drivers/net/ethernet/cirrus/mac89x0.c +++ b/drivers/net/ethernet/cirrus/mac89x0.c @@ -99,7 +99,6 @@ static char *version = #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c index 682750c052c..414f0eea104 100644 --- a/drivers/net/ethernet/dlink/de600.c +++ b/drivers/net/ethernet/dlink/de600.c @@ -46,7 +46,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj #include #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c index afc5aaac6b6..2e2bc60ee81 100644 --- a/drivers/net/ethernet/dlink/de620.c +++ b/drivers/net/ethernet/dlink/de620.c @@ -122,7 +122,6 @@ static const char version[] = #include #include -#include /* Constant definitions for the DE-620 registers, commands and bits */ #include "de620.h" diff --git a/drivers/net/ethernet/fujitsu/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c index 586b46fd4ee..3d94797c8f9 100644 --- a/drivers/net/ethernet/fujitsu/at1700.c +++ b/drivers/net/ethernet/fujitsu/at1700.c @@ -52,7 +52,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c index c3f0178fb5c..a992d1f7e0d 100644 --- a/drivers/net/ethernet/fujitsu/eth16i.c +++ b/drivers/net/ethernet/fujitsu/eth16i.c @@ -163,7 +163,6 @@ static char *version = #include #include -#include #include diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c index 0230319ddb5..2418faf2251 100644 --- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c +++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c @@ -57,7 +57,6 @@ #include #include -#include /*====================================================================*/ diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c index ed6925f1147..e8984b05990 100644 --- a/drivers/net/ethernet/i825xx/3c507.c +++ b/drivers/net/ethernet/i825xx/3c507.c @@ -63,7 +63,6 @@ static const char version[] = #include #include -#include #include /* use 0 for production, 1 for verification, 2..7 for debug */ diff --git a/drivers/net/ethernet/i825xx/3c527.c b/drivers/net/ethernet/i825xx/3c527.c index ef43f3e951c..278e791afe0 100644 --- a/drivers/net/ethernet/i825xx/3c527.c +++ b/drivers/net/ethernet/i825xx/3c527.c @@ -106,7 +106,6 @@ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter #include -#include #include #include diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c index 7a4ad4a0791..7f49fd54c52 100644 --- a/drivers/net/ethernet/i825xx/eepro.c +++ b/drivers/net/ethernet/i825xx/eepro.c @@ -148,7 +148,6 @@ static const char version[] = #include #include -#include #include #include diff --git a/drivers/net/ethernet/i825xx/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c index 3fc649e54a3..cc2e66ad443 100644 --- a/drivers/net/ethernet/i825xx/eexpress.c +++ b/drivers/net/ethernet/i825xx/eexpress.c @@ -116,7 +116,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/i825xx/ether1.c b/drivers/net/ethernet/i825xx/ether1.c index 406a12b4640..067db3f13e9 100644 --- a/drivers/net/ethernet/i825xx/ether1.c +++ b/drivers/net/ethernet/i825xx/ether1.c @@ -48,7 +48,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c index a43649735a0..bd1f1ef91e1 100644 --- a/drivers/net/ethernet/i825xx/znet.c +++ b/drivers/net/ethernet/i825xx/znet.c @@ -100,7 +100,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index f30db1c4660..bc58f1dc22f 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -55,7 +55,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 75af1afe46c..5e1ca0f0509 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -57,7 +57,6 @@ #include #include #include -#include static char mv643xx_eth_driver_name[] = "mv643xx_eth"; static char mv643xx_eth_driver_version[] = "1.4"; diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 45a6333588e..efec6b60b32 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c index 5b89fd377ae..95dd39ffb23 100644 --- a/drivers/net/ethernet/natsemi/jazzsonic.c +++ b/drivers/net/ethernet/natsemi/jazzsonic.c @@ -38,7 +38,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index e640e23460d..b9680ba5a32 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -53,7 +53,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c index c24b46cbfe2..d52728b3c43 100644 --- a/drivers/net/ethernet/natsemi/ns83820.c +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -121,7 +121,6 @@ #include #include -#include #define DRV_NAME "ns83820" diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 22a8de00bf0..6338ef8606a 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -81,7 +81,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 8561dd25db6..aca13046e43 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -69,7 +69,6 @@ #include #include -#include #define TX_WORK_PER_LOOP 64 #define RX_WORK_PER_LOOP 64 diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c index 46c1932048c..e02f04d7f3a 100644 --- a/drivers/net/ethernet/realtek/atp.c +++ b/drivers/net/ethernet/realtek/atp.c @@ -140,7 +140,6 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ #include #include -#include #include #include diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 27c358c8f4d..7b23554f80b 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -29,7 +29,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c index 7b819bd8c41..df808ac8cb6 100644 --- a/drivers/net/ethernet/seeq/ether3.c +++ b/drivers/net/ethernet/seeq/ether3.c @@ -64,7 +64,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/seeq/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c index 79899077444..698edbbfc14 100644 --- a/drivers/net/ethernet/seeq/seeq8005.c +++ b/drivers/net/ethernet/seeq/seeq8005.c @@ -47,7 +47,6 @@ static const char version[] = #include #include -#include #include #include diff --git a/drivers/net/ethernet/smsc/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c index d12e48a7861..04393b5fef7 100644 --- a/drivers/net/ethernet/smsc/smc91c92_cs.c +++ b/drivers/net/ethernet/smsc/smc91c92_cs.c @@ -53,7 +53,6 @@ #include #include -#include #include /*====================================================================*/ diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index 3c229556073..ce4df61b4b5 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -99,7 +99,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index f359863b534..2a83fc57edb 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -35,7 +35,6 @@ #include #include #include -#include #include "sunbmac.h" diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index ba041596e04..558409ff405 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 8b627e2f798..b95e7e681b3 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -36,7 +36,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/sun/sunqe.c b/drivers/net/ethernet/sun/sunqe.c index 139d6b410d6..7d4a040d84a 100644 --- a/drivers/net/ethernet/sun/sunqe.c +++ b/drivers/net/ethernet/sun/sunqe.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index 840e0e9031f..277c93e9ff4 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -50,7 +50,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index 5c69c6f93fb..94a1f94f74b 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -89,7 +89,6 @@ #include #include -#include #include #ifndef MANFID_COMPAQ diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 2a5a34d2d67..64783a0d545 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -13,7 +13,6 @@ */ #include -#include #include #include #include diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index f1aea0c9833..acb636963e9 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -86,7 +86,6 @@ #include #include -#include #include /* --------------------------------------------------------------------- */ diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c index 18d8affecd1..76d54774ba8 100644 --- a/drivers/net/hamradio/bpqether.c +++ b/drivers/net/hamradio/bpqether.c @@ -69,7 +69,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index bc02968cee1..aed1a6105b2 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -17,7 +17,6 @@ * Copyright (C) 2004, 05 Thomas Osterried DL9SAU */ #include -#include #include #include #include diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c index 33655814448..efc6c97163a 100644 --- a/drivers/net/hamradio/scc.c +++ b/drivers/net/hamradio/scc.c @@ -177,7 +177,6 @@ #include #include -#include #include #include diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 696327773fb..5a6412ecce7 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -52,7 +52,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 2a51363d9fe..168c8f41d09 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -43,7 +43,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 617a446d126..4351296dde3 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -156,7 +156,6 @@ #include #include -#include #include #include diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index b71998d0b5b..32eb94ece6c 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -41,7 +41,6 @@ #include #include -#include #include #include diff --git a/drivers/net/plip/plip.c b/drivers/net/plip/plip.c index 1a5a316cc96..bed62d9c53c 100644 --- a/drivers/net/plip/plip.c +++ b/drivers/net/plip/plip.c @@ -113,7 +113,6 @@ static const char version[] = "NET3 PLIP version 2.4-parport gniibe@mri.co.jp\n" #include -#include #include #include diff --git a/drivers/net/slip/slhc.c b/drivers/net/slip/slhc.c index 0a0a6643cf3..1252d9c726a 100644 --- a/drivers/net/slip/slhc.c +++ b/drivers/net/slip/slhc.c @@ -75,7 +75,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 69345dfae0f..d4c9db3da22 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -64,7 +64,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index d7c292aa76b..b15ac81d46f 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -68,7 +68,6 @@ #include #include -#include #include "3c359.h" diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c index 515f122777a..b715e6b444d 100644 --- a/drivers/net/tokenring/abyss.c +++ b/drivers/net/tokenring/abyss.c @@ -33,7 +33,6 @@ #include #include -#include #include #include diff --git a/drivers/net/tokenring/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c index 91b684630fc..356e28e4881 100644 --- a/drivers/net/tokenring/ibmtr_cs.c +++ b/drivers/net/tokenring/ibmtr_cs.c @@ -63,7 +63,6 @@ #include #include -#include #define PCMCIA #include "ibmtr.c" diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c index 8d71e0d2906..3e4b4f09111 100644 --- a/drivers/net/tokenring/lanstreamer.c +++ b/drivers/net/tokenring/lanstreamer.c @@ -127,7 +127,6 @@ #include #include -#include #include "lanstreamer.h" diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 1cdc034f6ae..28adcdf3b14 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -28,7 +28,6 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n"; #include #include -#include #include #include diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c index fd8dce90c95..0e234741cc7 100644 --- a/drivers/net/tokenring/olympic.c +++ b/drivers/net/tokenring/olympic.c @@ -106,7 +106,6 @@ #include #include -#include #include "olympic.h" diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c index 8d362e64a40..62d90e40f9e 100644 --- a/drivers/net/tokenring/proteon.c +++ b/drivers/net/tokenring/proteon.c @@ -31,7 +31,6 @@ static const char version[] = "proteon.c: v1.00 02/01/2003 by Jochen Friedrich\n #include #include -#include #include #include #include diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c index 46db5c5395b..ee11e93dc30 100644 --- a/drivers/net/tokenring/skisa.c +++ b/drivers/net/tokenring/skisa.c @@ -38,7 +38,6 @@ static const char version[] = "skisa.c: v1.03 09/12/2002 by Jochen Friedrich\n"; #include #include -#include #include #include #include diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index 029846a9863..cb35fb79e01 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -49,7 +49,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 102f896bbc5..be4813e0366 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -98,7 +98,6 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A #include #include -#include #include #include #include diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c index d3e788a9cd1..fb9918da579 100644 --- a/drivers/net/tokenring/tmspci.c +++ b/drivers/net/tokenring/tmspci.c @@ -34,7 +34,6 @@ #include #include -#include #include #include diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 74d7f76d14a..bb8c72c79c6 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -69,7 +69,6 @@ #include #include -#include #include /* Uncomment to enable debugging */ diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 48ab38a34c5..147614ed86a 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -50,7 +50,6 @@ #include -#include #include #include #include diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index fe8d060d8ff..c676de7de02 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -93,7 +93,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c index 33b67d88fce..cf4903355a3 100644 --- a/drivers/net/wan/hd64570.c +++ b/drivers/net/wan/hd64570.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include "hd64570.h" diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c index efc0db10118..e2779faa6c4 100644 --- a/drivers/net/wan/hd64572.c +++ b/drivers/net/wan/hd64572.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include "hd64572.h" diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 7beeb9b88a3..a73b49eb87e 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index c8531612eea..de3bbf43fc5 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -54,7 +54,6 @@ #include #include -#include #include #include #include diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index e862369b4a6..d7a65e141d1 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -18,7 +18,6 @@ #include -#include #include #include #include diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index ddc061dd150..520a4b2eb9c 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index c983c10e0f6..630577dd3a7 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -37,7 +37,6 @@ #include #include -#include #include "airo.h" diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 3010cee7b95..6c87a823f5a 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ec295c4f677..ded03d226a7 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -48,7 +48,6 @@ #include #include -#include #include #include "atmel.h" diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index 851fa10241e..c5404cb59e0 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -24,7 +24,6 @@ #include #include -#include #include #include "prismcompat.h" diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 04fec1fa6e0..86a738bf591 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -53,7 +53,6 @@ #include #include -#include #include #include diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 98fbf54f600..00f6e69c1dc 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -53,7 +53,6 @@ #include #include -#include #include "wl3501.h" diff --git a/drivers/nubus/nubus.c b/drivers/nubus/nubus.c index b764ac22d52..44d01afafe9 100644 --- a/drivers/nubus/nubus.c +++ b/drivers/nubus/nubus.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 7ff10c1e866..9c5aae52a3b 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -55,7 +55,6 @@ #include #include -#include #include #include diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 95930d01623..1f9e9fefb8e 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -140,7 +140,6 @@ #include #include #include -#include #include /* read/write functions */ #ifdef CONFIG_SUPERIO #include diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index d5f3d753a10..320e43a52e9 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include /* for register_parisc_driver() stuff */ diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index d9ea192c400..673c14ea11e 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 3e447d0387b..0b66bfc0e14 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -17,7 +17,6 @@ #include -#include #include #include "i82092aa.h" diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 72a033a2acd..e6f3d17dd2b 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -48,7 +48,6 @@ #include #include #include -#include #include diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 2adb0106a03..a26f38c6402 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -24,7 +24,6 @@ #include #include #include -#include #include diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 1511ff71c87..296514155cd 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index 271a590a5f3..a317defd616 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -52,7 +52,6 @@ #include #include -#include #include #include #include diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 96c72e90b79..0f8b70b2776 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -19,7 +19,6 @@ #include -#include #include "pd6729.h" #include "i82365.h" diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 64d433ec4fc..85ac0957dcd 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index 0c62fe31a40..79ecc23643e 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -41,7 +41,6 @@ #include #include -#include #include "soc_common.h" #include "sa11xx_base.h" diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index a0a9c2aa8d7..5d22c6acb8e 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -45,7 +45,6 @@ #include #include -#include #include "soc_common.h" diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index 71aeed93037..d6881514d38 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 310160bffe3..cbe15fc3741 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -47,7 +47,6 @@ #include #include -#include #include #include "tcic.h" diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index 379f4218857..8f6698074f8 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -21,7 +21,6 @@ #include #include -#include #include #define MEM_MAP_SIZE 0x400000 diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c index b859d16cf78..769d265b221 100644 --- a/drivers/pnp/pnpbios/bioscalls.c +++ b/drivers/pnp/pnpbios/bioscalls.c @@ -17,7 +17,6 @@ #include #include -#include #include #include "pnpbios.h" diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c index cfe86853feb..9d422264864 100644 --- a/drivers/pnp/pnpbios/core.c +++ b/drivers/pnp/pnpbios/core.c @@ -65,7 +65,6 @@ #include #include -#include #include #include "../base.h" diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index c5c121f14c9..7e9a72eb2fe 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c index 826157f3869..327657e2e26 100644 --- a/drivers/sbus/char/flash.c +++ b/drivers/sbus/char/flash.c @@ -16,7 +16,6 @@ #include #include -#include #include #include #include diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c index 8d6e508222b..2236aea3ca2 100644 --- a/drivers/sbus/char/openprom.c +++ b/drivers/sbus/char/openprom.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #ifdef CONFIG_PCI diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 0b31658ccde..a9e468cc1ca 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -19,7 +19,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index f672491774e..a3adfb4357f 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -129,7 +129,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index f66c33b9ab4..d4da3708763 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -47,7 +47,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index bfd618a6949..374c4edf4fc 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -41,7 +41,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index f17c92cf808..19a36945e6f 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -239,7 +239,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index ed119cedaae..ede91f37800 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -42,7 +42,6 @@ #include #include -#include #include #include "scsi.h" diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c index 1c10b796c1a..a3e6ed35391 100644 --- a/drivers/scsi/aha1740.c +++ b/drivers/scsi/aha1740.c @@ -53,7 +53,6 @@ #include #include -#include #include #include "scsi.h" diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 2fe9e90e53d..cbde1dca45a 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -61,7 +61,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c index c454e44cf51..b330438ac66 100644 --- a/drivers/scsi/arm/acornscsi.c +++ b/drivers/scsi/arm/acornscsi.c @@ -138,7 +138,6 @@ #include #include -#include #include #include "../scsi.h" diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c index a3398fe70a9..c3b99c93637 100644 --- a/drivers/scsi/arm/cumana_1.c +++ b/drivers/scsi/arm/cumana_1.c @@ -12,7 +12,6 @@ #include #include -#include #include "../scsi.h" #include diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c index 849cdf89f7b..d25f944b59c 100644 --- a/drivers/scsi/arm/oak.c +++ b/drivers/scsi/arm/oak.c @@ -13,7 +13,6 @@ #include #include -#include #include "../scsi.h" #include diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index 7e6eca4a125..f29d5121d5e 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c index c2677ba29c7..4b11bb04f5c 100644 --- a/drivers/scsi/dtc.c +++ b/drivers/scsi/dtc.c @@ -72,7 +72,6 @@ #endif -#include #include #include #include diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c index a2c6135d337..53bfcaa86f0 100644 --- a/drivers/scsi/fd_mcs.c +++ b/drivers/scsi/fd_mcs.c @@ -93,7 +93,6 @@ #include #include -#include #include "scsi.h" #include diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c index 643f6d500fe..1a2a1e5824e 100644 --- a/drivers/scsi/fdomain.c +++ b/drivers/scsi/fdomain.c @@ -282,7 +282,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 81182badfeb..1a5954f0915 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -100,7 +100,6 @@ #undef NCR5380_STAT_LIMIT #endif -#include #include #include #include diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index d42ec921de4..5d72274c507 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -129,7 +129,6 @@ #include #include -#include #include #include #include diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c index 67fc8ffd52e..cd09132d5d7 100644 --- a/drivers/scsi/ibmmca.c +++ b/drivers/scsi/ibmmca.c @@ -32,7 +32,6 @@ #include #include -#include #include #include "scsi.h" diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c index 112f1bec775..deb5b6d8398 100644 --- a/drivers/scsi/in2000.c +++ b/drivers/scsi/in2000.c @@ -123,7 +123,6 @@ #include #include -#include #include "scsi.h" #include diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index e6173376605..e5cd8d8d4ce 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index 2bccfbe5661..24828b54773 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -43,7 +43,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index 49447477953..e8a04ae3276 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 4b3b4755945..5982a587bab 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -115,7 +115,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index 002924963cd..62b616891a3 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -38,7 +38,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index de0b1a704fb..21883a2d632 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -54,7 +54,6 @@ static const char * osst_version = "0.99.4"; #include #include #include -#include /* The driver prints some debugging information on the console if DEBUG is defined and non-zero. */ diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c index f2018b46f49..2f72c9807b1 100644 --- a/drivers/scsi/pas16.c +++ b/drivers/scsi/pas16.c @@ -113,7 +113,6 @@ #include -#include #include #include #include diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index d838205ab16..6c6486f626e 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -359,7 +359,6 @@ #include #include #include -#include #include #include diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index e40dc1cb09a..b191dd54920 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -35,7 +35,6 @@ #include "qlogicpti.h" #include -#include #include #include #include diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9262cdfa4b2..a15f691f9d3 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -42,7 +42,6 @@ static const char *verstr = "20101219"; #include #include -#include #include #include diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c index baf7328de95..6e25889db9d 100644 --- a/drivers/scsi/sun3_scsi.c +++ b/drivers/scsi/sun3_scsi.c @@ -63,7 +63,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/sun3_scsi_vme.c b/drivers/scsi/sun3_scsi_vme.c index fbba78e5722..a3dd55d1d2f 100644 --- a/drivers/scsi/sun3_scsi_vme.c +++ b/drivers/scsi/sun3_scsi_vme.c @@ -25,7 +25,6 @@ #include #include -#include #include #include diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c index 012c86edd59..ac4eca6a532 100644 --- a/drivers/scsi/sym53c416.c +++ b/drivers/scsi/sym53c416.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c index 041eaaace2c..d672d97fb84 100644 --- a/drivers/scsi/t128.c +++ b/drivers/scsi/t128.c @@ -106,7 +106,6 @@ * $Log: t128.c,v $ */ -#include #include #include #include diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 90e104d6b55..9c216e56356 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -410,7 +410,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 7e22b737dfd..14e0c40a68c 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -141,7 +141,6 @@ #include #include -#include #include #define ULTRASTOR_PRIVATE /* Get the private stuff from ultrastor.h */ diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index 9ee0afef2d1..d89a5dfd3ad 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -179,7 +179,6 @@ #include #include -#include #include #include diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 610f7391456..9b0d7169603 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -47,7 +47,6 @@ #include #include -#include #include #include #include diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index db1fd63aaab..bf185e2807d 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -42,7 +42,6 @@ #include #include #include -#include #include "comedidev.h" #include "internal.h" diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c index c9e8c478576..915157d4780 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas64.c +++ b/drivers/staging/comedi/drivers/cb_pcidas64.c @@ -86,7 +86,6 @@ TODO: #include "../comedidev.h" #include #include -#include #include "comedi_pci.h" #include "8253.h" diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c index fd274e9c7b7..13e9c807169 100644 --- a/drivers/staging/comedi/drivers/mite.c +++ b/drivers/staging/comedi/drivers/mite.c @@ -55,7 +55,6 @@ #include "comedi_pci.h" #include "../comedidev.h" -#include #define PCI_MITE_SIZE 4096 #define PCI_DAQ_SIZE 4096 diff --git a/drivers/staging/crystalhd/crystalhd.h b/drivers/staging/crystalhd/crystalhd.h index 3f4d7951502..b3a550bd5b0 100644 --- a/drivers/staging/crystalhd/crystalhd.h +++ b/drivers/staging/crystalhd/crystalhd.h @@ -1,7 +1,6 @@ #ifndef _CRYSTALHD_H_ #define _CRYSTALHD_H_ -#include #include "bc_dts_defs.h" #include "crystalhd_misc.h" #include "bc_dts_glob_lnx.h" diff --git a/drivers/staging/crystalhd/crystalhd_lnx.h b/drivers/staging/crystalhd/crystalhd_lnx.h index a81f9298b0a..a9e36336d09 100644 --- a/drivers/staging/crystalhd/crystalhd_lnx.h +++ b/drivers/staging/crystalhd/crystalhd_lnx.h @@ -45,7 +45,6 @@ #include #include #include -#include #include #include "crystalhd.h" diff --git a/drivers/staging/crystalhd/crystalhd_misc.h b/drivers/staging/crystalhd/crystalhd_misc.h index 84c87938a83..8cdaa7a3481 100644 --- a/drivers/staging/crystalhd/crystalhd_misc.h +++ b/drivers/staging/crystalhd/crystalhd_misc.h @@ -37,6 +37,7 @@ #include #include #include +#include "bc_dts_glob_lnx.h" /* Global log level variable defined in crystal_misc.c file */ extern uint32_t g_linklog_level; diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 3f919babe79..886f5650444 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -70,7 +70,6 @@ #include #include #include -#include #include #include diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c index 7569aa0f24d..c4a8a0a26eb 100644 --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include diff --git a/drivers/staging/media/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c index 6c9279a6d60..ece2dd14648 100644 --- a/drivers/staging/media/go7007/go7007-driver.c +++ b/drivers/staging/media/go7007/go7007-driver.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/media/go7007/go7007-i2c.c b/drivers/staging/media/go7007/go7007-i2c.c index b8cfa1a6eae..6bc82aaeef1 100644 --- a/drivers/staging/media/go7007/go7007-i2c.c +++ b/drivers/staging/media/go7007/go7007-i2c.c @@ -26,7 +26,6 @@ #include #include #include -#include #include "go7007-priv.h" #include "wis-i2c.h" diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c index 2b27d8da70a..c8c96e26bc7 100644 --- a/drivers/staging/media/go7007/go7007-v4l2.c +++ b/drivers/staging/media/go7007/go7007-v4l2.c @@ -34,7 +34,6 @@ #include #include #include -#include #include "go7007.h" #include "go7007-priv.h" diff --git a/drivers/staging/media/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c index d071c838ac2..5af29ff68bf 100644 --- a/drivers/staging/media/go7007/snd-go7007.c +++ b/drivers/staging/media/go7007/snd-go7007.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index 8dd8897ad86..18a798c27a7 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -66,7 +66,6 @@ #include #include -#include #include #include #include diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c index c94382b917a..945d9623550 100644 --- a/drivers/staging/media/lirc/lirc_sir.c +++ b/drivers/staging/media/lirc/lirc_sir.c @@ -49,7 +49,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 4683d5f355c..6183573f112 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -58,7 +58,6 @@ #include #include -#include #define LCD_MINOR 156 #define KEYPAD_MINOR 185 diff --git a/drivers/staging/sbe-2t3e3/io.c b/drivers/staging/sbe-2t3e3/io.c index b458ff03406..9a50bcc5959 100644 --- a/drivers/staging/sbe-2t3e3/io.c +++ b/drivers/staging/sbe-2t3e3/io.c @@ -11,7 +11,6 @@ */ #include -#include #include "2t3e3.h" #include "ctrl.h" diff --git a/drivers/staging/telephony/phonedev.c b/drivers/staging/telephony/phonedev.c index 1915af20117..1dd0b6717cc 100644 --- a/drivers/staging/telephony/phonedev.c +++ b/drivers/staging/telephony/phonedev.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h index a2f31c69d12..ed00d3da320 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h +++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h @@ -17,7 +17,6 @@ #ifndef _HOST_OS_H_ #define _HOST_OS_H_ -#include #include #include #include diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index a2cbb29c3f5..7084f414846 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -74,7 +74,6 @@ #include #include #include -#include #include #include diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c index dab603e0f45..d5bf0a7012f 100644 --- a/drivers/staging/wlags49_h2/wl_main.c +++ b/drivers/staging/wlags49_h2/wl_main.c @@ -86,8 +86,7 @@ // #include // #include // #include -// #include -// #include +// // #include #include #include diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c index 9c16f5478a7..90820ff1ace 100644 --- a/drivers/staging/wlags49_h2/wl_netdev.c +++ b/drivers/staging/wlags49_h2/wl_netdev.c @@ -79,8 +79,7 @@ // #include // #include // #include -// #include -// #include +// // #include #include #include diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c index 2bd9b84ace8..3df990c7306 100644 --- a/drivers/staging/wlags49_h2/wl_pci.c +++ b/drivers/staging/wlags49_h2/wl_pci.c @@ -77,7 +77,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c index b748a3ff795..f104e6f1e98 100644 --- a/drivers/staging/wlags49_h2/wl_util.c +++ b/drivers/staging/wlags49_h2/wl_util.c @@ -73,8 +73,7 @@ // #include // #include // #include -// #include -// #include +// // #include #include #include diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index afadcd43d14..24145c30c9b 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -85,7 +85,6 @@ static char *serial_version = "4.30"; #include -#include #include diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 03c14979acc..794ecb40017 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -133,7 +133,6 @@ #include #include -#include #include diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 8a8d0440bab..324467d28a5 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -46,7 +46,6 @@ #include #include -#include #include #include diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 17ff377e412..c6f372dd562 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -41,7 +41,6 @@ #include #include -#include #include #include #include diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index a09ce3ef5d7..1b2db9a3038 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -102,7 +102,6 @@ #include #include -#include #include #include diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d2256d08ee7..94b6eda87af 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -50,7 +50,6 @@ #include #include -#include /* number of characters left in xmit buffer before select has we have room */ #define WAKEUP_CHARS 256 diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index f96ecaec24f..eeae7fafe9a 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -27,7 +27,6 @@ #include #include -#include #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 7398390e7e6..5ce782529d6 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -39,7 +39,6 @@ #include #include -#include #include #include diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 86090605a84..29b695d041e 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 90280ae1823..5b07c0c3a10 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -34,7 +34,6 @@ static char *serial_version = "$Revision: 1.25 $"; #include #include -#include #include #include diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c index e3699a84049..6491b8644a7 100644 --- a/drivers/tty/serial/dz.c +++ b/drivers/tty/serial/dz.c @@ -52,7 +52,6 @@ #include #include #include -#include #include #include diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index d55709a7a75..defc4e3393a 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -52,7 +52,6 @@ #include #include -#include #include #include #include diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 5e85e1e14c4..fca13dc73e2 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -50,7 +50,6 @@ #include #include -#include #include #include diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index b7455b52608..4001eee6c08 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -67,7 +67,6 @@ #include #include -#include #include #include diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 8e518da85fd..593d40ad0a6 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -86,7 +86,6 @@ #include #include -#include #include #include #include diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 34b1a3c4306..aa1debf97cc 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -73,7 +73,6 @@ #include #include -#include #include #include #include diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 4fb6c4b31b7..a3dddc12d2f 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -58,7 +58,6 @@ #include #include -#include #include #include #include diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index dd8a938510c..d939bd705c7 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -97,7 +97,6 @@ #include #include -#include #include #include diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 9314d93c1a2..a1b9a2f6856 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -23,7 +23,6 @@ #include #include -#include #undef TTY_DEBUG_WAIT_UNTIL_SENT diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 84c4a7d5603..3bdd4b19dd0 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -99,7 +99,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 2204a4c68d8..77779271f48 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -54,7 +54,6 @@ #include #include -#include #include /* gadget stack */ diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 15a8cdb2ded..d03ab95fcc8 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index e1cd56c5e2a..a6dfd216416 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #define DRIVER_DESC "USB Host+Gadget Emulator" diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b30e21fdbb1..5f94e79cd6b 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -43,7 +43,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index e1dfd32dc80..e151d6b87de 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -43,7 +43,6 @@ #include #include #include -#include #include diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index edd52d963f1..f9cedd52cf2 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include "langwell_udc.h" diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 19bbe80c2f8..a73cf406e2a 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include "mv_udc.h" diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 01ae56f4717..43ac7482fa9 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -42,7 +42,6 @@ #include #include -#include #include #include "net2272.h" diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index a5ccabc37f3..ac335af154b 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -59,7 +59,6 @@ #include #include #include -#include #include diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index b44830df593..3b4b6dd0f95 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index d83134b0f78..4e4dc1f5f38 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 1b33634f273..41ed69c96d8 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index d3cdffea9c8..73a934a170d 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -34,7 +34,6 @@ #include #include -#include #include diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index ab9c65e2c1d..195524cde6c 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index aede6374e4b..057cdda7a48 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #if defined(CONFIG_PPC_PS3) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 924880087a7..9e65e3091c8 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -70,7 +70,6 @@ #include #include -#include #include #include "isp116x.h" diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 9e63cdf1ab7..2ed112d3e15 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -84,7 +84,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index cd5e382db89..788ff07aa7c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -42,7 +42,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 015c7c62ed4..3b38030b02a 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -40,7 +40,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 2a2cce2d2fa..91ce1c02e61 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -51,7 +51,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 16dd6a6abf0..dbbd1ba2522 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -55,7 +55,6 @@ #include #include #include -#include #include /* FIXME ohci.h is ONLY for internal use by the OHCI driver. diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index e37dea87bb5..e4db350602b 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -45,7 +45,6 @@ #include #include #include -#include #include "uhci-hcd.h" diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c index f23cae094f1..887df9d8142 100644 --- a/drivers/video/amifb.c +++ b/drivers/video/amifb.c @@ -53,7 +53,6 @@ #include #include -#include #include #include #include diff --git a/drivers/video/bt431.h b/drivers/video/bt431.h index c826f2787ba..04e0cfbba53 100644 --- a/drivers/video/bt431.h +++ b/drivers/video/bt431.h @@ -8,7 +8,6 @@ * archive for more details. */ #include -#include /* * Bt431 cursor generator registers, 32-bit aligned. diff --git a/drivers/video/bt455.h b/drivers/video/bt455.h index b7591fea7ad..80f61b03e9a 100644 --- a/drivers/video/bt455.h +++ b/drivers/video/bt455.h @@ -8,7 +8,6 @@ * archive for more details. */ #include -#include /* * Bt455 byte-wide registers, 32-bit aligned. diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 8745637e4b7..2e471c22abf 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -77,7 +77,6 @@ #include /* For counting font checksums */ #include #include -#include #include "fbcon.h" diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c index a122d9287d1..6d159662904 100644 --- a/drivers/video/console/newport_con.c +++ b/drivers/video/console/newport_con.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 850380795b0..c1527f5b47e 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -51,7 +51,6 @@ #include #include -#include #ifdef __arm__ #include diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c index ec56d2544c7..49e3dda1a36 100644 --- a/drivers/video/dnfb.c +++ b/drivers/video/dnfb.c @@ -7,7 +7,6 @@ #include #include -#include #include #include #include diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index fb3f6739110..afc9521173e 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -71,7 +71,6 @@ #include #include #include -#include #ifdef CONFIG_MTRR #include diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c index 0c69fa20251..9b4a60b52a4 100644 --- a/drivers/video/pmag-ba-fb.c +++ b/drivers/video/pmag-ba-fb.c @@ -33,7 +33,6 @@ #include #include -#include #include