From 437052516779fea608261a50682b124315f48f01 Mon Sep 17 00:00:00 2001 From: "inaky@linux.intel.com" Date: Wed, 11 Oct 2006 20:05:58 -0700 Subject: usb/hub: allow hubs up to 31 children Current Wireless USB host hardware (Intel i1480 for example) allows up to 22 devices to connect, thus bringing up the max number of children in the WUSB Host Controller to 22 'fake' ports. Upcoming hardware might raise that limit. Makes almost no difference to go to 31, as the bit arrays are byte-aligned (plus an extra bit in general), so 22 bits fit in 4 bytes as 31 do. As well, the only other array that depends on USB_MAXCHILDREN is 'struct usb_hub->indicator'. By declaring it 'u8' instead of 'enum hub_led_mode', we reduce the size of each entry from 4 bytes (in i386) to 1, which will add as we when are doubling USB_MAXCHILDREN (with 16 the size of that array is 64 bytes, with 31 would be 128; by using u8 that goes down to 31 bytes). Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 5482bfb3303..e5cb1690975 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -313,8 +313,13 @@ struct usb_bus { /* This is arbitrary. * From USB 2.0 spec Table 11-13, offset 7, a hub can * have up to 255 ports. The most yet reported is 10. + * + * Current Wireless USB host hardware (Intel i1480 for example) allows + * up to 22 devices to connect. Upcoming hardware might raise that + * limit. Because the arrays need to add a bit for hub status data, we + * do 31, so plus one evens out to four bytes. */ -#define USB_MAXCHILDREN (16) +#define USB_MAXCHILDREN (31) struct usb_tt; -- cgit v1.2.3-70-g09d2 From 0c1ac4f25f894f9df0ffe9b912c165fb6a185a3c Mon Sep 17 00:00:00 2001 From: "Luiz Fernando N. Capitulino" Date: Mon, 30 Oct 2006 14:53:03 -0300 Subject: USB: makes usb_endpoint_* functions inline. We have no benefits of having the usb_endpoint_* functions as functions, but making them inline saves text and data segment sizes: text data bss dec hex filename 14893634 3108770 1108840 19111244 1239d4c vmlinux.func 14893185 3108566 1108840 19110591 1239abf vmlinux.inline This is the result of a 2.6.19-rc3 kernel compiled with GCC 4.1.1 without CONFIG_MODULES, CONFIG_CC_OPTIMIZE_FOR_SIZE, CONFIG_REGPARM options set. USB support is fully enabled (while most of the other drivers are not), and that kernel has most of the USB code ported to use the endpoint functions. That happens because a call to those functions are expensive (in terms of bytes), while the function's size is smaller or have the same 'size' of the call. Signed-off-by: Luiz Fernando N. Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 144 ------------------------------------------------- include/linux/usb.h | 142 ++++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 131 insertions(+), 155 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 467cb02832f..a83c2d5065c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -537,138 +537,6 @@ int usb_get_current_frame_number(struct usb_device *dev) return usb_hcd_get_frame_number (dev); } -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) -{ - return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); -} - /*-------------------------------------------------------------------*/ /* * __usb_get_extra_descriptor() finds a descriptor of specific type in the @@ -1102,18 +970,6 @@ EXPORT_SYMBOL(__usb_get_extra_descriptor); EXPORT_SYMBOL(usb_find_device); EXPORT_SYMBOL(usb_get_current_frame_number); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_in); -EXPORT_SYMBOL_GPL(usb_endpoint_dir_out); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int); -EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in); -EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out); - EXPORT_SYMBOL (usb_buffer_alloc); EXPORT_SYMBOL (usb_buffer_free); diff --git a/include/linux/usb.h b/include/linux/usb.h index e5cb1690975..e732e024a14 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -495,17 +495,137 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, /*-------------------------------------------------------------------------*/ -extern int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd); -extern int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd); +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); +} /*-------------------------------------------------------------------------*/ -- cgit v1.2.3-70-g09d2 From 692a186c9d5f12d43cef28d40c25247dc4f302f0 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 30 Oct 2006 17:07:51 -0500 Subject: USB: expand autosuspend/autoresume API This patch (as814) adds usb_autopm_set_interface() to the autosuspend API. It also provides convenient wrapper routines, usb_autopm_enable() and usb_autopm_disable(), for drivers that want to specify directly whether autosuspend should be allowed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 22 ++++++++++++++++++++++ include/linux/usb.h | 29 ++++++++++++++++++++++++++--- 2 files changed, 48 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ca0e40ed2b7..204495fa6b3 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1322,6 +1322,28 @@ int usb_autopm_get_interface(struct usb_interface *intf) } EXPORT_SYMBOL_GPL(usb_autopm_get_interface); +/** + * usb_autopm_set_interface - set a USB interface's autosuspend state + * @intf: the usb_interface whose state should be set + * + * This routine sets the autosuspend state of @intf's device according + * to @intf's usage counter, which the caller must have set previously. + * If the counter is <= 0, the device is autosuspended (if it isn't + * already suspended and if nothing else prevents the autosuspend). If + * the counter is > 0, the device is autoresumed (if it isn't already + * awake). + */ +int usb_autopm_set_interface(struct usb_interface *intf) +{ + int status; + + status = usb_autopm_do_interface(intf, 0); + // dev_dbg(&intf->dev, "%s: status %d cnt %d\n", + // __FUNCTION__, status, intf->pm_usage_cnt); + return status; +} +EXPORT_SYMBOL_GPL(usb_autopm_set_interface); + #endif /* CONFIG_USB_SUSPEND */ static int usb_suspend(struct device *dev, pm_message_t message) diff --git a/include/linux/usb.h b/include/linux/usb.h index e732e024a14..864c6c21c21 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -415,14 +415,37 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); /* USB autosuspend and autoresume */ #ifdef CONFIG_USB_SUSPEND +extern int usb_autopm_set_interface(struct usb_interface *intf); extern int usb_autopm_get_interface(struct usb_interface *intf); extern void usb_autopm_put_interface(struct usb_interface *intf); +static inline void usb_autopm_enable(struct usb_interface *intf) +{ + intf->pm_usage_cnt = 0; + usb_autopm_set_interface(intf); +} + +static inline void usb_autopm_disable(struct usb_interface *intf) +{ + intf->pm_usage_cnt = 1; + usb_autopm_set_interface(intf); +} + #else -#define usb_autopm_get_interface(intf) 0 -#define usb_autopm_put_interface(intf) do {} while (0) -#endif +static inline int usb_autopm_set_interface(struct usb_interface *intf) +{ return 0; } + +static inline int usb_autopm_get_interface(struct usb_interface *intf) +{ return 0; } + +static inline void usb_autopm_put_interface(struct usb_interface *intf) +{ } +static inline void usb_autopm_enable(struct usb_interface *intf) +{ } +static inline void usb_autopm_disable(struct usb_interface *intf) +{ } +#endif /*-------------------------------------------------------------------------*/ -- cgit v1.2.3-70-g09d2 From ce3615879ae85373c03744b45b7c2d7ae5e29b2a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Nov 2006 11:12:22 -0500 Subject: USB: struct usb_device: change flag to bitflag This patch (as816) changes an existing flag in the usb_device structure to a bitflag, preparing the way for more bitflags to come in the future. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 2 +- include/linux/usb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 7729c074488..5684d872292 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -764,7 +764,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) err = -EINVAL; goto errout; } else { - dev->have_langid = -1; + dev->have_langid = 1; dev->string_langid = tbuf[2] | (tbuf[3]<< 8); /* always use the first langid listed */ dev_dbg (&dev->dev, "default language 0x%04x\n", diff --git a/include/linux/usb.h b/include/linux/usb.h index 864c6c21c21..5634a2d91ec 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -362,7 +362,7 @@ struct usb_device { u8 portnum; /* Parent port number (origin 1) */ u8 level; /* Number of USB hub ancestors */ - int have_langid; /* whether string_langid is valid */ + unsigned have_langid:1; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ /* static strings from the device */ -- cgit v1.2.3-70-g09d2 From ee49fb5dc89d34f1794ac9362fa97c1a640f7ddd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 22 Nov 2006 16:55:54 -0500 Subject: USB: keep count of unsuspended children This patch (as818b) simplifies autosuspend processing by keeping track of the number of unsuspended children of each USB hub. This will permit us to avoid a good deal of unnecessary work all the time; we will no longer have to create a bunch of workqueue entries to carry out autosuspend requests, only to have them fail because one of the hub's children isn't suspended. The basic idea is simple. There already is a usage counter in the usb_device structure for preventing autosuspends. The patch just increments that counter for every unsuspended child. There's only one tricky part: When a device disconnects we need to remember whether it was suspended at the time (leave the counter alone) or not (decrement the counter). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 34 +++++++++++++++++++++++----------- drivers/usb/core/hub.c | 14 ++++++++++++++ include/linux/usb.h | 1 + 3 files changed, 38 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 40c1bf09b2b..0fa15bd62c4 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1048,7 +1048,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) /* If the suspend succeeded, propagate it up the tree */ } else if (parent) - usb_autosuspend_device(parent, 0); + usb_autosuspend_device(parent, 1); // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; @@ -1096,9 +1096,25 @@ int usb_resume_both(struct usb_device *udev) /* Propagate the resume up the tree, if necessary */ if (udev->state == USB_STATE_SUSPENDED) { if (parent) { - usb_pm_lock(parent); - parent->auto_pm = 1; - status = usb_resume_both(parent); + status = usb_autoresume_device(parent, 1); + if (status == 0) { + status = usb_resume_device(udev); + if (status) { + usb_autosuspend_device(parent, 1); + + /* It's possible usb_resume_device() + * failed after the port was + * unsuspended, causing udev to be + * logically disconnected. We don't + * want usb_disconnect() to autosuspend + * the parent again, so tell it that + * udev disconnected while still + * suspended. */ + if (udev->state == + USB_STATE_NOTATTACHED) + udev->discon_suspended = 1; + } + } } else { /* We can't progagate beyond the USB subsystem, @@ -1107,11 +1123,9 @@ int usb_resume_both(struct usb_device *udev) if (udev->dev.parent->power.power_state.event != PM_EVENT_ON) status = -EHOSTUNREACH; - } - if (status == 0) - status = usb_resume_device(udev); - if (parent) - usb_pm_unlock(parent); + else + status = usb_resume_device(udev); + } } else { /* Needed only for setting udev->dev.power.power_state.event @@ -1119,8 +1133,6 @@ int usb_resume_both(struct usb_device *udev) status = usb_resume_device(udev); } - /* Now the parent won't suspend until we are finished */ - if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 46df5e60764..e46d38b1824 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1039,6 +1039,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev) if (udev->children[i]) recursively_mark_NOTATTACHED(udev->children[i]); } + if (udev->state == USB_STATE_SUSPENDED) + udev->discon_suspended = 1; udev->state = USB_STATE_NOTATTACHED; } @@ -1228,6 +1230,14 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); + /* Decrement the parent's count of unsuspended children */ + if (udev->parent) { + usb_pm_lock(udev); + if (!udev->discon_suspended) + usb_autosuspend_device(udev->parent, 1); + usb_pm_unlock(udev); + } + put_device(&udev->dev); } @@ -1356,6 +1366,10 @@ static int __usb_new_device(void *void_data) goto fail; } + /* Increment the parent's count of unsuspended children */ + if (udev->parent) + usb_autoresume_device(udev->parent, 1); + exit: module_put(THIS_MODULE); return err; diff --git a/include/linux/usb.h b/include/linux/usb.h index 5634a2d91ec..0cd73edeef1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -362,6 +362,7 @@ struct usb_device { u8 portnum; /* Parent port number (origin 1) */ u8 level; /* Number of USB hub ancestors */ + unsigned discon_suspended:1; /* Disconnected while suspended */ unsigned have_langid:1; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ -- cgit v1.2.3-70-g09d2