From 12db56071b473a59c550d0aa70db6972a49d73af Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 23 Jan 2006 17:11:08 -0200 Subject: V4L/DVB (3420): Added iocls to configure VBI on tvp5150 - Added iocls to configure VBI on tvp5150 Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/media/v4l2-common.h') diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index d4030a7e16e..11728daf009 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -160,7 +160,8 @@ struct msp_matrix { /* Used to generate VBI signals on a video signal. v4l2_sliced_vbi_data is filled with the data packets that should be output. Note that if you set - the line field to 0, then that VBI signal is disabled. */ + the line field to 0, then that VBI signal is disabled. If no + valid VBI data was found, then the type field is set to 0 on return. */ #define VIDIOC_INT_S_VBI_DATA _IOW ('d', 105, struct v4l2_sliced_vbi_data) /* Used to obtain the sliced VBI packet from a readback register. Not all -- cgit v1.2.3-70-g09d2 From 757d250518c4905c5d13c8974446e08a2e3cf244 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 23 Jan 2006 17:11:10 -0200 Subject: V4L/DVB (3430): Add new internal VIDIOC_INT commands - Add new internal VIDIOC_INT commands for setting the tuner mode, for putting a chip into standby mode and to set/get the routing of inputs/outputs of audio or video of a chip. These new commands will replace older commands that are no longer up to the task. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-common.h | 51 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 44 insertions(+), 7 deletions(-) (limited to 'include/media/v4l2-common.h') diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 11728daf009..234e9cf7e84 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -115,12 +115,15 @@ enum v4l2_chip_ident { }; /* audio ioctls */ -/* v4l device was opened in Radio mode */ + +/* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */ #define AUDC_SET_RADIO _IO('d',88) -/* select from TV,radio,extern,MUTE */ + +/* select from TV,radio,extern,MUTE, to be replaced with VIDIOC_INT_S_AUDIO_ROUTING */ #define AUDC_SET_INPUT _IOW('d',89,int) -/* msp3400 ioctl: will be removed in the near future */ +/* msp3400 ioctl: will be removed in the near future, to be replaced by + VIDIOC_INT_S_AUDIO_ROUTING. */ struct msp_matrix { int input; int output; @@ -128,12 +131,25 @@ struct msp_matrix { #define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix) /* tuner ioctls */ + /* Sets tuner type and its I2C addr */ -#define TUNER_SET_TYPE_ADDR _IOW('d',90,int) -/* Puts tuner on powersaving state, disabling it, except for i2c */ -#define TUNER_SET_STANDBY _IOW('d',91,int) +#define TUNER_SET_TYPE_ADDR _IOW('d', 90, int) + +/* Puts tuner on powersaving state, disabling it, except for i2c. To be replaced + by VIDIOC_INT_S_STANDBY. */ +#define TUNER_SET_STANDBY _IOW('d', 91, int) + /* Sets tda9887 specific stuff, like port1, port2 and qss */ -#define TDA9887_SET_CONFIG _IOW('d',92,int) +#define TDA9887_SET_CONFIG _IOW('d', 92, int) + +/* Switch the tuner to a specific tuner mode. Replacement of AUDC_SET_RADIO */ +#define VIDIOC_INT_S_TUNER_MODE _IOW('d', 93, enum v4l2_tuner_type) + +/* Generic standby command. Passing -1 (all bits set to 1) will put the whole + chip into standby mode, value 0 will make the chip fully active. Specific + bits can be used by certain chips to enable/disable specific subsystems. + Replacement of TUNER_SET_STANDBY. */ +#define VIDIOC_INT_S_STANDBY _IOW('d', 94, u32) /* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */ #define VIDIOC_INT_S_REGISTER _IOR ('d', 100, struct v4l2_register) @@ -181,4 +197,25 @@ struct msp_matrix { If the frequency is not supported, then -EINVAL is returned. */ #define VIDIOC_INT_I2S_CLOCK_FREQ _IOW ('d', 108, u32) +/* Routing definition, device dependent. It specifies which inputs (if any) + should be routed to which outputs (if any). */ +struct v4l2_routing { + u32 input; + u32 output; +}; + +/* These internal commands should be used to define the inputs and outputs + of an audio/video chip. They will replace AUDC_SET_INPUT. + The v4l2 API commands VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, + VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT are meant to be used by the + user. Internally these commands should be used to switch inputs/outputs + because only the driver knows how to map a 'Television' input to the precise + input/output routing of an A/D converter, or a DSP, or a video digitizer. + These four commands should only be sent directly to an i2c device, they + should not be broadcast as the routing is very device specific. */ +#define VIDIOC_INT_S_AUDIO_ROUTING _IOW ('d', 109, struct v4l2_routing) +#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing *) +#define VIDIOC_INT_S_VIDEO_ROUTING _IOW ('d', 111, struct v4l2_routing) +#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing *) + #endif /* V4L2_COMMON_H_ */ -- cgit v1.2.3-70-g09d2 From 41f38b43e0bfbb2ba1ef3c778f376dad8820b214 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Feb 2006 00:08:49 -0300 Subject: V4L/DVB (3371): Add debug to ioctl arguments. Added a new function that allows printing ioctl arguments. This makes easier to include debug code under v4l ioctl handling. Also fixed some declarations on internal ioctl. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-common.c | 524 ++++++++++++++++++++++++++++++++++++++ include/media/v4l2-common.h | 11 +- 2 files changed, 531 insertions(+), 4 deletions(-) (limited to 'include/media/v4l2-common.h') diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index cd2c4475525..a241bf7e92c 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -362,6 +362,529 @@ void v4l_printk_ioctl(unsigned int cmd) } } +/* Common ioctl debug function. This function can be used by + external ioctl messages as well as internal V4L ioctl and its + arguments */ +void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) +{ + printk(s); + printk(": "); + v4l_printk_ioctl(cmd); + switch (cmd) { + case VIDIOC_INT_G_CHIP_IDENT: + { + enum v4l2_chip_ident *p=arg; + printk ("%s: chip ident=%d\n", s, *p); + break; + } + case VIDIOC_G_PRIORITY: + case VIDIOC_S_PRIORITY: + { + enum v4l2_priority *p=arg; + printk ("%s: priority=%d\n", s, *p); + break; + } + case VIDIOC_INT_S_TUNER_MODE: + { + enum v4l2_tuner_type *p=arg; + printk ("%s: tuner type=%d\n", s, *p); + break; + } + case DECODER_SET_VBI_BYPASS: + case DECODER_ENABLE_OUTPUT: + case DECODER_GET_STATUS: + case DECODER_SET_OUTPUT: + case DECODER_SET_INPUT: + case DECODER_SET_GPIO: + case DECODER_SET_NORM: + case VIDIOCCAPTURE: + case VIDIOCSYNC: + case VIDIOCSWRITEMODE: + case TUNER_SET_TYPE_ADDR: + case TUNER_SET_STANDBY: + case TDA9887_SET_CONFIG: + case AUDC_SET_INPUT: + case VIDIOC_OVERLAY_OLD: + case VIDIOC_STREAMOFF: + case VIDIOC_G_OUTPUT: + case VIDIOC_S_OUTPUT: + case VIDIOC_STREAMON: + case VIDIOC_G_INPUT: + case VIDIOC_OVERLAY: + case VIDIOC_S_INPUT: + { + int *p=arg; + printk ("%s: value=%d\n", s, *p); + break; + } + case MSP_SET_MATRIX: + { + struct msp_matrix *p=arg; + printk ("%s: input=%d, output=%d\n", s, p->input, p->output); + break; + } + case VIDIOC_G_AUDIO: + case VIDIOC_S_AUDIO: + case VIDIOC_ENUMAUDIO: + case VIDIOC_G_AUDIO_OLD: + { + struct v4l2_audio *p=arg; + + printk ("%s: index=%d, name=%s, capability=%d, mode=%d\n", + s,p->index, p->name,p->capability, p->mode); + break; + } + case VIDIOC_G_AUDOUT: + case VIDIOC_S_AUDOUT: + case VIDIOC_ENUMAUDOUT: + case VIDIOC_G_AUDOUT_OLD: + { + struct v4l2_audioout *p=arg; + printk ("%s: index=%d, name=%s, capability=%d, mode=%d\n", s, + p->index, p->name, p->capability,p->mode); + break; + } + case VIDIOC_QBUF: + case VIDIOC_DQBUF: + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *p=arg; + struct v4l2_timecode *tc=&p->timecode; + printk ("%s: %02ld:%02d:%02d.%08ld index=%d, type=%d, " + "bytesused=%d, flags=0x%08d, " + "field=%0d, sequence=%d, memory=%d, offset/userptr=0x%08lx,", + s, + (p->timestamp.tv_sec/3600), + (int)(p->timestamp.tv_sec/60)%60, + (int)(p->timestamp.tv_sec%60), + p->timestamp.tv_usec, + p->index,p->type,p->bytesused,p->flags, + p->field,p->sequence,p->memory,p->m.userptr); + printk ("%s: timecode= %02d:%02d:%02d type=%d, " + "flags=0x%08d, frames=%d, userbits=0x%08x", + s,tc->hours,tc->minutes,tc->seconds, + tc->type, tc->flags, tc->frames, (__u32) tc->userbits); + break; + } + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *p=arg; + printk ("%s: driver=%s, card=%s, bus=%s, version=%d, " + "capabilities=%d\n", s, + p->driver,p->card,p->bus_info, + p->version, + p->capabilities); + break; + } + case VIDIOC_G_CTRL: + case VIDIOC_S_CTRL: + case VIDIOC_S_CTRL_OLD: + { + struct v4l2_control *p=arg; + printk ("%s: id=%d, value=%d\n", s, p->id, p->value); + break; + } + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + { + struct v4l2_crop *p=arg; + /*FIXME: Should also show rect structs */ + printk ("%s: type=%d\n", s, p->type); + break; + } + case VIDIOC_CROPCAP: + case VIDIOC_CROPCAP_OLD: + { + struct v4l2_cropcap *p=arg; + /*FIXME: Should also show rect structs */ + printk ("%s: type=%d\n", s, p->type); + break; + } + case VIDIOC_INT_DECODE_VBI_LINE: + { + struct v4l2_decode_vbi_line *p=arg; + printk ("%s: is_second_field=%d, ptr=0x%08lx, line=%d, " + "type=%d\n", s, + p->is_second_field,(unsigned long)p->p,p->line,p->type); + break; + } + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *p=arg; + printk ("%s: index=%d, type=%d, flags=%d, description=%s," + " pixelformat=%d\n", s, + p->index, p->type, p->flags,p->description, + p->pixelformat); + + break; + } + case VIDIOC_G_FMT: + case VIDIOC_S_FMT: + case VIDIOC_TRY_FMT: + { + struct v4l2_format *p=arg; + /* FIXME: Should be one dump per type*/ + printk ("%s: type=%d\n", s,p->type); + break; + } + case VIDIOC_G_FBUF: + case VIDIOC_S_FBUF: + { + struct v4l2_framebuffer *p=arg; + /*FIXME: should show also struct v4l2_pix_format p->fmt field */ + printk ("%s: capability=%d, flags=%d, base=0x%08lx\n", s, + p->capability,p->flags, (unsigned long)p->base); + break; + } + case VIDIOC_G_FREQUENCY: + case VIDIOC_S_FREQUENCY: + { + struct v4l2_frequency *p=arg; + printk ("%s: tuner=%d, type=%d, frequency=%d\n", s, + p->tuner,p->type,p->frequency); + break; + } + case VIDIOC_ENUMINPUT: + { + struct v4l2_input *p=arg; + printk ("%s: index=%d, name=%s, type=%d, audioset=%d, " + "tuner=%d, std=%lld, status=%d\n", s, + p->index,p->name,p->type,p->audioset, + p->tuner,p->std, + p->status); + break; + } + case VIDIOC_G_JPEGCOMP: + case VIDIOC_S_JPEGCOMP: + { + struct v4l2_jpegcompression *p=arg; + printk ("%s: quality=%d, APPn=%d, APP_len=%d, COM_len=%d," + " jpeg_markers=%d\n", s, + p->quality,p->APPn,p->APP_len, + p->COM_len,p->jpeg_markers); + break; + } + case VIDIOC_G_MODULATOR: + case VIDIOC_S_MODULATOR: + { + struct v4l2_modulator *p=arg; + printk ("%s: index=%d, name=%s, capability=%d, rangelow=%d," + " rangehigh=%d, txsubchans=%d\n", s, + p->index, p->name,p->capability,p->rangelow, + p->rangehigh,p->txsubchans); + break; + } + case VIDIOC_G_MPEGCOMP: + case VIDIOC_S_MPEGCOMP: + { + struct v4l2_mpeg_compression *p=arg; + /*FIXME: Several fields not shown */ + printk ("%s: ts_pid_pmt=%d, ts_pid_audio=%d, ts_pid_video=%d, " + "ts_pid_pcr=%d, ps_size=%d, au_sample_rate=%d, " + "au_pesid=%c, vi_frame_rate=%d, vi_frames_per_gop=%d, " + "vi_bframes_count=%d, vi_pesid=%c\n", s, + p->ts_pid_pmt,p->ts_pid_audio, p->ts_pid_video, + p->ts_pid_pcr, p->ps_size, p->au_sample_rate, + p->au_pesid, p->vi_frame_rate, + p->vi_frames_per_gop, p->vi_bframes_count, + p->vi_pesid); + break; + } + case VIDIOC_ENUMOUTPUT: + { + struct v4l2_output *p=arg; + printk ("%s: index=%d, name=%s,type=%d, audioset=%d, " + "modulator=%d, std=%lld\n", + s,p->index,p->name,p->type,p->audioset, + p->modulator,p->std); + break; + } + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *p=arg; + printk ("%s: id=%d, type=%d, name=%s, min/max=%d/%d," + " step=%d, default=%d, flags=0x%08x\n", s, + p->id,p->type,p->name,p->minimum,p->maximum, + p->step,p->default_value,p->flags); + break; + } + case VIDIOC_QUERYMENU: + { + struct v4l2_querymenu *p=arg; + printk ("%s: id=%d, index=%d, name=%s\n", s, + p->id,p->index,p->name); + break; + } + case VIDIOC_INT_G_REGISTER: + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *p=arg; + printk ("%s: i2c_id=%d, reg=%lu, val=%d\n", s, + p->i2c_id,p->reg,p->val); + + break; + } + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *p=arg; + printk ("%s: count=%d, type=%d, memory=%d\n", s, + p->count,p->type,p->memory); + break; + } + case VIDIOC_INT_S_AUDIO_ROUTING: + case VIDIOC_INT_S_VIDEO_ROUTING: + case VIDIOC_INT_G_AUDIO_ROUTING: + case VIDIOC_INT_G_VIDEO_ROUTING: + { + struct v4l2_routing *p=arg; + printk ("%s: input=%d, output=%d\n", s, p->input, p->output); + break; + } + case VIDIOC_G_SLICED_VBI_CAP: + { + struct v4l2_sliced_vbi_cap *p=arg; + printk ("%s: service_set=%d\n", s, + p->service_set); + break; + } + case VIDIOC_INT_S_VBI_DATA: + case VIDIOC_INT_G_VBI_DATA: + { + struct v4l2_sliced_vbi_data *p=arg; + printk ("%s: id=%d, field=%d, line=%d\n", s, + p->id, p->field, p->line); + break; + } + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *p=arg; + printk ("%s: index=%d, id=%lld, name=%s, fps=%d/%d, framelines=%d\n", s, + p->index, p->id, p->name, + p->frameperiod.numerator, + p->frameperiod.denominator, + p->framelines); + + break; + } + case VIDIOC_G_PARM: + case VIDIOC_S_PARM: + case VIDIOC_S_PARM_OLD: + { + struct v4l2_streamparm *p=arg; + printk ("%s: type=%d\n", s, p->type); + + break; + } + case VIDIOC_G_TUNER: + case VIDIOC_S_TUNER: + { + struct v4l2_tuner *p=arg; + printk ("%s: index=%d, name=%s, type=%d, capability=%d, " + "rangelow=%d, rangehigh=%d, signal=%d, afc=%d, " + "rxsubchans=%d, audmode=%d\n", s, + p->index, p->name, p->type, + p->capability, p->rangelow,p->rangehigh, + p->rxsubchans, p->audmode, p->signal, + p->afc); + break; + } + case VIDIOCGVBIFMT: + case VIDIOCSVBIFMT: + { + struct vbi_format *p=arg; + printk ("%s: sampling_rate=%d, samples_per_line=%d, " + "sample_format=%d, start=%d/%d, count=%d/%d, flags=%d\n", s, + p->sampling_rate,p->samples_per_line, + p->sample_format,p->start[0],p->start[1], + p->count[0],p->count[1],p->flags); + break; + } + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + { + struct video_audio *p=arg; + printk ("%s: audio=%d, volume=%d, bass=%d, treble=%d, " + "flags=%d, name=%s, mode=%d, balance=%d, step=%d\n", + s,p->audio,p->volume,p->bass, p->treble, + p->flags,p->name,p->mode,p->balance,p->step); + break; + } + case VIDIOCGFBUF: + case VIDIOCSFBUF: + { + struct video_buffer *p=arg; + printk ("%s: base=%08lx, height=%d, width=%d, depth=%d, " + "bytesperline=%d\n", s, + (unsigned long) p->base, p->height, p->width, + p->depth,p->bytesperline); + break; + } + case VIDIOCGCAP: + { + struct video_capability *p=arg; + printk ("%s: name=%s, type=%d, channels=%d, audios=%d, " + "maxwidth=%d, maxheight=%d, minwidth=%d, minheight=%d\n", + s,p->name,p->type,p->channels,p->audios, + p->maxwidth,p->maxheight,p->minwidth, + p->minheight); + + break; + } + case VIDIOCGCAPTURE: + case VIDIOCSCAPTURE: + { + struct video_capture *p=arg; + printk ("%s: x=%d, y=%d, width=%d, height=%d, decimation=%d," + " flags=%d\n", s, + p->x, p->y,p->width, p->height, + p->decimation,p->flags); + break; + } + case VIDIOCGCHAN: + case VIDIOCSCHAN: + { + struct video_channel *p=arg; + printk ("%s: channel=%d, name=%s, tuners=%d, flags=%d, " + "type=%d, norm=%d\n", s, + p->channel,p->name,p->tuners, + p->flags,p->type,p->norm); + + break; + } + case VIDIOCSMICROCODE: + { + struct video_code *p=arg; + printk ("%s: loadwhat=%s, datasize=%d\n", s, + p->loadwhat,p->datasize); + break; + } + case DECODER_GET_CAPABILITIES: + { + struct video_decoder_capability *p=arg; + printk ("%s: flags=%d, inputs=%d, outputs=%d\n", s, + p->flags,p->inputs,p->outputs); + break; + } + case DECODER_INIT: + { + struct video_decoder_init *p=arg; + printk ("%s: len=%c\n", s, p->len); + break; + } + case VIDIOCGPLAYINFO: + { + struct video_info *p=arg; + printk ("%s: frame_count=%d, h_size=%d, v_size=%d, " + "smpte_timecode=%d, picture_type=%d, " + "temporal_reference=%d, user_data=%s\n", s, + p->frame_count, p->h_size, + p->v_size, p->smpte_timecode, + p->picture_type, p->temporal_reference, + p->user_data); + break; + } + case VIDIOCKEY: + { + struct video_key *p=arg; + printk ("%s: key=%s, flags=%d\n", s, + p->key, p->flags); + break; + } + case VIDIOCGMBUF: + { + struct video_mbuf *p=arg; + printk ("%s: size=%d, frames=%d, offsets=0x%08lx\n", s, + p->size, + p->frames, + (unsigned long)p->offsets); + break; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *p=arg; + printk ("%s: frame=%d, height=%d, width=%d, format=%d\n", s, + p->frame, + p->height, p->width, + p->format); + break; + } + case VIDIOCGPICT: + case VIDIOCSPICT: + case DECODER_SET_PICTURE: + { + struct video_picture *p=arg; + + printk ("%s: brightness=%d, hue=%d, colour=%d, contrast=%d," + " whiteness=%d, depth=%d, palette=%d\n", s, + p->brightness, p->hue, p->colour, + p->contrast, p->whiteness, p->depth, + p->palette); + break; + } + case VIDIOCSPLAYMODE: + { + struct video_play_mode *p=arg; + printk ("%s: mode=%d, p1=%d, p2=%d\n", s, + p->mode,p->p1,p->p2); + break; + } + case VIDIOCGTUNER: + case VIDIOCSTUNER: + { + struct video_tuner *p=arg; + printk ("%s: tuner=%d, name=%s, rangelow=%ld, rangehigh=%ld, " + "flags=%d, mode=%d, signal=%d\n", s, + p->tuner, p->name,p->rangelow, p->rangehigh, + p->flags,p->mode, p->signal); + break; + } + case VIDIOCGUNIT: + { + struct video_unit *p=arg; + printk ("%s: video=%d, vbi=%d, radio=%d, audio=%d, " + "teletext=%d\n", s, + p->video,p->vbi,p->radio,p->audio,p->teletext); + break; + } + case VIDIOCGWIN: + case VIDIOCSWIN: + { + struct video_window *p=arg; + printk ("%s: x=%d, y=%d, width=%d, height=%d, chromakey=%d," + " flags=%d, clipcount=%d\n", s, + p->x, p->y,p->width, p->height, + p->chromakey,p->flags, + p->clipcount); + break; + } + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + case VIDIOC_INT_I2S_CLOCK_FREQ: + case VIDIOC_INT_S_STANDBY: + { + u32 *p=arg; + + printk ("%s: value=%d\n", s, *p); + break; + } + case VIDIOCGFREQ: + case VIDIOCSFREQ: + { + unsigned long *p=arg; + printk ("%s: value=%lu\n", s, *p); + break; + } + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + { + v4l2_std_id *p=arg; + + printk ("%s: value=%llu\n", s, *p); + break; + } + } +} + /* ----------------------------------------------------------------- */ EXPORT_SYMBOL(v4l2_video_std_construct); @@ -376,6 +899,7 @@ EXPORT_SYMBOL(v4l2_prio_check); EXPORT_SYMBOL(v4l2_field_names); EXPORT_SYMBOL(v4l2_type_names); EXPORT_SYMBOL(v4l_printk_ioctl); +EXPORT_SYMBOL(v4l_printk_ioctl_arg); /* * Local variables: diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 234e9cf7e84..c44741e78f2 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -58,6 +58,9 @@ /* Prints the ioctl in a human-readable format */ extern void v4l_printk_ioctl(unsigned int cmd); +/* Prints the ioctl and arg in a human-readable format */ +extern void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg); + /* Use this macro for non-I2C drivers. Pass the driver name as the first arg. */ #define v4l_print_ioctl(name, cmd) \ do { \ @@ -185,11 +188,11 @@ struct msp_matrix { register contains invalid or erroneous data -EIO is returned. Note that you must fill in the 'id' member and the 'field' member (to determine whether CC data from the first or second field should be obtained). */ -#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data *) +#define VIDIOC_INT_G_VBI_DATA _IOWR('d', 106, struct v4l2_sliced_vbi_data) /* Returns the chip identifier or V4L2_IDENT_UNKNOWN if no identification can be made. */ -#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident *) +#define VIDIOC_INT_G_CHIP_IDENT _IOR ('d', 107, enum v4l2_chip_ident) /* Sets I2S speed in bps. This is used to provide a standard way to select I2S clock used by driving digital audio streams at some board designs. @@ -214,8 +217,8 @@ struct v4l2_routing { These four commands should only be sent directly to an i2c device, they should not be broadcast as the routing is very device specific. */ #define VIDIOC_INT_S_AUDIO_ROUTING _IOW ('d', 109, struct v4l2_routing) -#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing *) +#define VIDIOC_INT_G_AUDIO_ROUTING _IOR ('d', 110, struct v4l2_routing) #define VIDIOC_INT_S_VIDEO_ROUTING _IOW ('d', 111, struct v4l2_routing) -#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing *) +#define VIDIOC_INT_G_VIDEO_ROUTING _IOR ('d', 112, struct v4l2_routing) #endif /* V4L2_COMMON_H_ */ -- cgit v1.2.3-70-g09d2 From f5762e441d5022ecc5b66b5fe54e41e2ac5d02be Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 13 Mar 2006 13:31:31 -0300 Subject: V4L/DVB (3513): Remove saa711x driver Now, em28xx uses saa7115 instead of saa711x. saa7115 driver is capable of handling saa 7113, 7114 and 7115. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Makefile | 2 +- drivers/media/video/em28xx/em28xx-video.c | 218 ++---------------------------- drivers/media/video/saa7115.c | 76 +++++++++-- include/media/v4l2-common.h | 1 + 4 files changed, 78 insertions(+), 219 deletions(-) (limited to 'include/media/v4l2-common.h') diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 51721574d9c..00080224f28 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -44,7 +44,7 @@ obj-$(CONFIG_VIDEO_MEYE) += meye.o obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/ obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ -obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o +obj-$(CONFIG_VIDEO_EM28XX) += saa7115.o tvp5150.o obj-$(CONFIG_VIDEO_AUDIO_DECODER) += wm8775.o cs53l32a.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 78f0f7a706e..780342f7b23 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -101,23 +101,6 @@ static struct em28xx_tvnorm tvnorms[] = { } }; -static const unsigned char saa7114_i2c_init[] = { - 0x00,0x00,0x01,0x08,0x02,0xc4,0x03,0x30,0x04,0x90,0x05,0x90,0x06,0xeb,0x07,0xe0, - 0x08,0x88,0x09,0x40,0x0a,0x80,0x0b,0x44,0x0c,0x40,0x0d,0x00,0x0e,0x81,0x0f,0x2a, - 0x10,0x06,0x11,0x00,0x12,0xc8,0x13,0x80,0x14,0x00,0x15,0x11,0x16,0x01,0x17,0x42, - 0x18,0x40,0x19,0x80,0x40,0x00,0x41,0xff,0x42,0xff,0x43,0xff,0x44,0xff,0x45,0xff, - 0x46,0xff,0x47,0xff,0x48,0xff,0x49,0xff,0x4a,0xff,0x4b,0xff,0x4c,0xff,0x4d,0xff, - 0x4e,0xff,0x4f,0xff,0x50,0xff,0x51,0xff,0x52,0xff,0x53,0xff,0x54,0x5f,0x55,0xff, - 0x56,0xff,0x57,0xff,0x58,0x00,0x59,0x47,0x5a,0x03,0x5b,0x03,0x5d,0x3e,0x5e,0x00, - 0x80,0x1c,0x83,0x01,0x84,0xa5,0x85,0x10,0x86,0x45,0x87,0x41,0x88,0xf0,0x88,0x00, - 0x88,0xf0,0x90,0x00,0x91,0x08,0x92,0x00,0x93,0x80,0x94,0x08,0x95,0x00,0x96,0xc0, - 0x97,0x02,0x98,0x13,0x99,0x00,0x9a,0x38,0x9b,0x01,0x9c,0x80,0x9d,0x02,0x9e,0x06, - 0x9f,0x01,0xa0,0x01,0xa1,0x00,0xa2,0x00,0xa4,0x80,0xa5,0x36,0xa6,0x36,0xa8,0x67, - 0xa9,0x04,0xaa,0x00,0xac,0x33,0xad,0x02,0xae,0x00,0xb0,0xcd,0xb1,0x04,0xb2,0xcd, - 0xb3,0x04,0xb4,0x01,0xb8,0x00,0xb9,0x00,0xba,0x00,0xbb,0x00,0xbc,0x00,0xbd,0x00, - 0xbe,0x00,0xbf,0x00 -}; - #define TVNORMS ARRAY_SIZE(tvnorms) /* supported controls */ @@ -144,65 +127,6 @@ static struct v4l2_queryctrl em28xx_qctrl[] = { } }; -/* FIXME: These are specific to saa711x - should be moved to its code */ -static struct v4l2_queryctrl saa711x_qctrl[] = { - { - .id = V4L2_CID_BRIGHTNESS, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", - .minimum = -128, - .maximum = 127, - .step = 1, - .default_value = 0, - .flags = 0, - },{ - .id = V4L2_CID_CONTRAST, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contrast", - .minimum = 0x0, - .maximum = 0x1f, - .step = 0x1, - .default_value = 0x10, - .flags = 0, - },{ - .id = V4L2_CID_SATURATION, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", - .minimum = 0x0, - .maximum = 0x1f, - .step = 0x1, - .default_value = 0x10, - .flags = 0, - },{ - .id = V4L2_CID_RED_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Red chroma balance", - .minimum = -128, - .maximum = 127, - .step = 1, - .default_value = 0, - .flags = 0, - },{ - .id = V4L2_CID_BLUE_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Blue chroma balance", - .minimum = -128, - .maximum = 127, - .step = 1, - .default_value = 0, - .flags = 0, - },{ - .id = V4L2_CID_GAMMA, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Gamma", - .minimum = 0x0, - .maximum = 0x3f, - .step = 0x1, - .default_value = 0x20, - .flags = 0, - } -}; - static struct usb_driver em28xx_usb_driver; static DEFINE_MUTEX(em28xx_sysfs_lock); @@ -245,22 +169,9 @@ static int em28xx_config(struct em28xx *dev) static void em28xx_config_i2c(struct em28xx *dev) { struct v4l2_frequency f; - struct video_decoder_init em28xx_vdi = {.data = NULL }; - - - /* configure decoder */ - if(dev->model == EM2820_BOARD_MSI_VOX_USB_2){ - em28xx_vdi.data=saa7114_i2c_init; - em28xx_vdi.len=sizeof(saa7114_i2c_init); - } - - - em28xx_i2c_call_clients(dev, DECODER_INIT, &em28xx_vdi); - em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &dev->ctl_input); -/* em28xx_i2c_call_clients(dev,DECODER_SET_PICTURE, &dev->vpic); */ -/* em28xx_i2c_call_clients(dev,DECODER_SET_NORM,&dev->tvnorm->id); */ -/* em28xx_i2c_call_clients(dev,DECODER_ENABLE_OUTPUT,&output); */ -/* em28xx_i2c_call_clients(dev,DECODER_DUMP, NULL); */ + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL); + em28xx_i2c_call_clients(dev, VIDIOC_S_INPUT, &dev->ctl_input); + em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL); /* configure tuner */ f.tuner = 0; @@ -300,8 +211,7 @@ static void video_mux(struct em28xx *dev, int index) dev->ctl_input = index; dev->ctl_ainput = INPUT(index)->amux; - em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &input); - + em28xx_i2c_call_clients(dev, VIDIOC_S_INPUT, &input); em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput); @@ -747,43 +657,6 @@ static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) } } -/*FIXME: should be moved to saa711x */ -static int saa711x_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) -{ - s32 tmp; - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - if ((tmp = em28xx_brightness_get(dev)) < 0) - return -EIO; - ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ - return 0; - case V4L2_CID_CONTRAST: - if ((ctrl->value = em28xx_contrast_get(dev)) < 0) - return -EIO; - return 0; - case V4L2_CID_SATURATION: - if ((ctrl->value = em28xx_saturation_get(dev)) < 0) - return -EIO; - return 0; - case V4L2_CID_RED_BALANCE: - if ((tmp = em28xx_v_balance_get(dev)) < 0) - return -EIO; - ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ - return 0; - case V4L2_CID_BLUE_BALANCE: - if ((tmp = em28xx_u_balance_get(dev)) < 0) - return -EIO; - ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ - return 0; - case V4L2_CID_GAMMA: - if ((ctrl->value = em28xx_gamma_get(dev)) < 0) - return -EIO; - return 0; - default: - return -EINVAL; - } -} - /* * em28xx_set_ctrl() * mute or set new saturation, brightness or contrast @@ -806,27 +679,6 @@ static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) } } -/*FIXME: should be moved to saa711x */ -static int saa711x_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) -{ - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - return em28xx_brightness_set(dev, ctrl->value); - case V4L2_CID_CONTRAST: - return em28xx_contrast_set(dev, ctrl->value); - case V4L2_CID_SATURATION: - return em28xx_saturation_set(dev, ctrl->value); - case V4L2_CID_RED_BALANCE: - return em28xx_v_balance_set(dev, ctrl->value); - case V4L2_CID_BLUE_BALANCE: - return em28xx_u_balance_set(dev, ctrl->value); - case V4L2_CID_GAMMA: - return em28xx_gamma_set(dev, ctrl->value); - default: - return -EINVAL; - } -} - /* * em28xx_stream_interrupt() * stops streaming @@ -1130,8 +982,6 @@ static int em28xx_do_ioctl(struct inode *inode, struct file *filp, em28xx_set_norm(dev, dev->width, dev->height); - em28xx_i2c_call_clients(dev, DECODER_SET_NORM, - &tvnorms[i].mode); em28xx_i2c_call_clients(dev, VIDIOC_S_STD, &dev->tvnorm->id); @@ -1242,22 +1092,11 @@ static int em28xx_do_ioctl(struct inode *inode, struct file *filp, } } } - if (dev->decoder == EM28XX_TVP5150) { - em28xx_i2c_call_clients(dev,cmd,qc); - if (qc->type) - return 0; - else - return -EINVAL; - } - for (i = 0; i < ARRAY_SIZE(saa711x_qctrl); i++) { - if (qc->id && qc->id == saa711x_qctrl[i].id) { - memcpy(qc, &(saa711x_qctrl[i]), - sizeof(*qc)); - return 0; - } - } - - return -EINVAL; + em28xx_i2c_call_clients(dev,cmd,qc); + if (qc->type) + return 0; + else + return -EINVAL; } case VIDIOC_G_CTRL: { @@ -1267,12 +1106,8 @@ static int em28xx_do_ioctl(struct inode *inode, struct file *filp, if (!dev->has_msp34xx) retval=em28xx_get_ctrl(dev, ctrl); if (retval==-EINVAL) { - if (dev->decoder == EM28XX_TVP5150) { - em28xx_i2c_call_clients(dev,cmd,arg); - return 0; - } - - return saa711x_get_ctrl(dev, ctrl); + em28xx_i2c_call_clients(dev,cmd,arg); + return 0; } else return retval; } case VIDIOC_S_CTRL: @@ -1293,33 +1128,8 @@ static int em28xx_do_ioctl(struct inode *inode, struct file *filp, } } - if (dev->decoder == EM28XX_TVP5150) { - em28xx_i2c_call_clients(dev,cmd,arg); - return 0; - } else if (!dev->has_msp34xx) { - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (ctrl->id == em28xx_qctrl[i].id) { - if (ctrl->value < - em28xx_qctrl[i].minimum - || ctrl->value > - em28xx_qctrl[i].maximum) - return -ERANGE; - return em28xx_set_ctrl(dev, ctrl); - } - } - for (i = 0; i < ARRAY_SIZE(saa711x_qctrl); i++) { - if (ctrl->id == saa711x_qctrl[i].id) { - if (ctrl->value < - saa711x_qctrl[i].minimum - || ctrl->value > - saa711x_qctrl[i].maximum) - return -ERANGE; - return saa711x_set_ctrl(dev, ctrl); - } - } - } - - return -EINVAL; + em28xx_i2c_call_clients(dev,cmd,arg); + return 0; } /* --- tuner ioctls ------------------------------------------ */ case VIDIOC_G_TUNER: @@ -1772,7 +1582,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, #ifdef CONFIG_MODULES /* request some modules */ if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114) - request_module("saa711x"); + request_module("saa7115"); if (dev->decoder == EM28XX_TVP5150) request_module("tvp5150"); if (dev->has_tuner) diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index f0eb9851bf5..7050d81c024 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1,4 +1,4 @@ -/* saa7115 - Philips SAA7114/SAA7115 video decoder driver +/* saa7115 - Philips SAA7113/SAA7114/SAA7115 video decoder driver * * Based on saa7114 driver by Maxim Yevtyushkin, which is based on * the saa7111 driver by Dave Perks. @@ -16,6 +16,7 @@ * (2/17/2003) * * VBI support (2004) and cleanups (2005) by Hans Verkuil + * SAA7113 support by Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -42,8 +43,9 @@ #include #include -MODULE_DESCRIPTION("Philips SAA7114/SAA7115 video decoder driver"); -MODULE_AUTHOR("Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_DESCRIPTION("Philips SAA7113/SAA7114/SAA7115 video decoder driver"); +MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " + "Hans Verkuil, Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); static int debug = 0; @@ -51,7 +53,10 @@ module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { + 0x4a >>1, 0x48 >>1, /* SAA7113 */ + 0x42 >> 1, 0x40 >> 1, /* SAA7114 and SAA7115 */ + I2C_CLIENT_END }; I2C_CLIENT_INSMOD; @@ -101,10 +106,12 @@ static inline int saa7115_read(struct i2c_client *client, u8 reg) Hauppauge driver sets. */ static const unsigned char saa7115_init_auto_input[] = { + /* Front-End Part */ 0x01, 0x48, /* white peak control disabled */ 0x03, 0x20, /* was 0x30. 0x20: long vertical blanking */ 0x04, 0x90, /* analog gain set to 0 */ 0x05, 0x90, /* analog gain set to 0 */ + /* Decoder Part */ 0x06, 0xeb, /* horiz sync begin = -21 */ 0x07, 0xe0, /* horiz sync stop = -17 */ 0x0a, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ @@ -123,6 +130,8 @@ static const unsigned char saa7115_init_auto_input[] = { 0x1b, 0x42, /* misc chroma control 0x42 = recommended */ 0x1c, 0xa9, /* combfilter control 0xA9 = recommended */ 0x1d, 0x01, /* combfilter control 0x01 = recommended */ + + /* Power Device Control */ 0x88, 0xd0, /* reset device */ 0x88, 0xf0, /* set device programmed, all in operational mode */ 0x00, 0x00 @@ -338,6 +347,33 @@ static const unsigned char saa7115_cfg_vbi_off[] = { 0x00, 0x00 }; +static const unsigned char saa7113_init_auto_input[] = { + 0x01, 0x08, /* PH7113_INCREMENT_DELAY - (1) (1) (1) (1) IDEL3 IDEL2 IDELL1 IDEL0 */ + 0x02, 0xc2, /* PH7113_ANALOG_INPUT_CONTR_1 - FUSE1 FUSE0 GUDL1 GUDL0 MODE3 MODE2 MODE1 MODE0 */ + 0x03, 0x30, /* PH7113_ANALOG_INPUT_CONTR_2 - (1) HLNRS VBSL WPOFF HOLDG GAFIX GAI28 GAI18 */ + 0x04, 0x00, /* PH7113_ANALOG_INPUT_CONTR_3 - GAI17 GAI16 GAI15 GAI14 GAI13 GAI12 GAI11 GAI10 */ + 0x05, 0x00, /* PH7113_ANALOG_INPUT_CONTR_4 - GAI27 GAI26 GAI25 GAI24 GAI23 GAI22 GAI21 GAI20 */ + 0x06, 0x89, /* PH7113_HORIZONTAL_SYNC_START - HSB7 HSB6 HSB5 HSB4 HSB3 HSB2 HSB1 HSB0 */ + 0x07, 0x0d, /* PH7113_HORIZONTAL_SYNC_STOP - HSS7 HSS6 HSS5 HSS4 HSS3 HSS2 HSS1 HSS0 */ + 0x08, 0x88, /* PH7113_SYNC_CONTROL - AUFD FSEL FOET HTC1 HTC0 HPLL VNOI1 VNOI0 */ + 0x09, 0x01, /* PH7113_LUMINANCE_CONTROL - BYPS PREF BPSS1 BPSS0 VBLB UPTCV APER1 APER0 */ + 0x0a, 0x80, /* PH7113_LUMINANCE_BRIGHTNESS - BRIG7 BRIG6 BRIG5 BRIG4 BRIG3 BRIG2 BRIG1 BRIG0 */ + 0x0b, 0x47, /* PH7113_LUMINANCE_CONTRAST - CONT7 CONT6 CONT5 CONT4 CONT3 CONT2 CONT1 CONT0 */ + 0x0c, 0x40, /* PH7113_CHROMA_SATURATION - SATN7 SATN6 SATN5 SATN4 SATN3 SATN2 SATN1 SATN0 */ + 0x0d, 0x00, /* PH7113_CHROMA_HUE_CONTROL - HUEC7 HUEC6 HUEC5 HUEC4 HUEC3 HUEC2 HUEC1 HUEC0 */ + 0x0e, 0x01, /* PH7113_CHROMA_CONTROL - CDTO CSTD2 CSTD1 CSTD0 DCCF FCTC CHBW1 CHBW0 */ + 0x0f, 0x2a, /* PH7113_CHROMA_GAIN_CONTROL - ACGC CGAIN6 CGAIN5 CGAIN4 CGAIN3 CGAIN2 CGAIN1 CGAIN0 */ + 0x10, 0x08, /* PH7113_FORMAT_DELAY_CONTROL - OFTS1 OFTS0 HDEL1 HDEL0 VRLN YDEL2 YDEL1 YDEL0 */ + 0x11, 0x0c, /* PH7113_OUTPUT_CONTROL_1 - GPSW1 CM99 GPSW0 HLSEL OEYC OERT VIPB COLO */ + 0x12, 0x07, /* PH7113_OUTPUT_CONTROL_2 - RTSE13 RTSE12 RTSE11 RTSE10 RTSE03 RTSE02 RTSE01 RTSE00 */ + 0x13, 0x00, /* PH7113_OUTPUT_CONTROL_3 - ADLSB (1) (1) OLDSB FIDP (1) AOSL1 AOSL0 */ + 0x14, 0x00, /* RESERVED 14 - (1) (1) (1) (1) (1) (1) (1) (1) */ + 0x15, 0x00, /* PH7113_V_GATE1_START - VSTA7 VSTA6 VSTA5 VSTA4 VSTA3 VSTA2 VSTA1 VSTA0 */ + 0x16, 0x00, /* PH7113_V_GATE1_STOP - VSTO7 VSTO6 VSTO5 VSTO4 VSTO3 VSTO2 VSTO1 VSTO0 */ + 0x17, 0x00, /* PH7113_V_GATE1_MSB - (1) (1) (1) (1) (1) (1) VSTO8 VSTA8 */ + 0x00, 0x00 +}; + static const unsigned char saa7115_init_misc[] = { 0x38, 0x03, /* audio stuff */ 0x39, 0x10, @@ -680,7 +716,7 @@ static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std) state->std = std; /* restart task B if needed */ - if (taskb && state->ident == V4L2_IDENT_SAA7114) { + if (taskb && state->ident != V4L2_IDENT_SAA7115) { saa7115_writeregs(client, saa7115_cfg_vbi_on); } @@ -703,7 +739,7 @@ static void saa7115_log_status(struct i2c_client *client) int vcr; v4l_info(client, "Audio frequency: %d Hz\n", state->audclk_freq); - if (client->name[6] == '4') { + if (state->ident != V4L2_IDENT_SAA7115) { /* status for the saa7114 */ reg1f = saa7115_read(client, 0x1f); signalOk = (reg1f & 0xc1) == 0x81; @@ -751,8 +787,8 @@ static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo u8 lcr[24]; int i, x; - /* saa7114 doesn't yet support VBI */ - if (state->ident == V4L2_IDENT_SAA7114) + /* saa7113/71144 doesn't yet support VBI */ + if (state->ident != V4L2_IDENT_SAA7115) return; for (i = 0; i <= 23; i++) @@ -1261,14 +1297,12 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind) saa7115_write(client, 0, 5); chip_id = saa7115_read(client, 0) & 0x0f; - if (chip_id != 4 && chip_id != 5) { + if (chip_id <3 && chip_id > 5) { v4l_dbg(1, debug, client, "saa7115 not found\n"); kfree(client); return 0; } - if (chip_id == 4) { - snprintf(client->name, sizeof(client->name) - 1, "saa7114"); - } + snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id); v4l_info(client, "saa711%d found @ 0x%x (%s)\n", chip_id, address << 1, adapter->name); state = kzalloc(sizeof(struct saa7115_state), GFP_KERNEL); @@ -1285,13 +1319,27 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind) state->contrast = 64; state->hue = 0; state->sat = 64; - state->ident = (chip_id == 4) ? V4L2_IDENT_SAA7114 : V4L2_IDENT_SAA7115; + switch (chip_id) { + case 3: + state->ident = V4L2_IDENT_SAA7113; + break; + case 4: + state->ident = V4L2_IDENT_SAA7114; + break; + default: + state->ident = V4L2_IDENT_SAA7115; + break; + } + state->audclk_freq = 48000; v4l_dbg(1, debug, client, "writing init values\n"); /* init to 60hz/48khz */ - saa7115_writeregs(client, saa7115_init_auto_input); + if (state->ident==V4L2_IDENT_SAA7113) + saa7115_writeregs(client, saa7113_init_auto_input); + else + saa7115_writeregs(client, saa7115_init_auto_input); saa7115_writeregs(client, saa7115_init_misc); saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x); saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y); diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index c44741e78f2..2360453e749 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -103,6 +103,7 @@ enum v4l2_chip_ident { V4L2_IDENT_UNKNOWN = 0, /* module saa7115: reserved range 100-149 */ + V4L2_IDENT_SAA7113 = 103, V4L2_IDENT_SAA7114 = 104, V4L2_IDENT_SAA7115 = 105, -- cgit v1.2.3-70-g09d2 From 8bf2f8e747700419cc5bbc56c4496774eb8f2f1f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Mar 2006 21:31:00 -0300 Subject: V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bt832.c | 1 - drivers/media/video/bt8xx/bttv-cards.c | 299 +++++++++++++++++----------- drivers/media/video/bt8xx/bttv-driver.c | 91 +++++---- drivers/media/video/bt8xx/bttv-i2c.c | 4 + drivers/media/video/bt8xx/bttv.h | 3 +- drivers/media/video/bt8xx/bttvp.h | 4 +- drivers/media/video/cs53l32a.c | 5 - drivers/media/video/cx25840/cx25840-audio.c | 1 - drivers/media/video/cx25840/cx25840-core.c | 11 - drivers/media/video/cx88/cx88.h | 1 - drivers/media/video/msp3400-driver.c | 104 +--------- drivers/media/video/msp3400-kthreads.c | 1 - drivers/media/video/saa7115.c | 1 - drivers/media/video/saa7134/saa7134.h | 1 - drivers/media/video/tda7432.c | 1 - drivers/media/video/tda9875.c | 3 - drivers/media/video/tuner-core.c | 1 - drivers/media/video/tvaudio.c | 67 +++++-- drivers/media/video/tveeprom.c | 30 +-- drivers/media/video/v4l2-common.c | 2 - drivers/media/video/wm8775.c | 5 - include/media/audiochip.h | 14 -- include/media/tvaudio.h | 30 +++ include/media/v4l2-common.h | 11 +- 24 files changed, 350 insertions(+), 341 deletions(-) create mode 100644 include/media/tvaudio.h (limited to 'include/media/v4l2-common.h') diff --git a/drivers/media/video/bt8xx/bt832.c b/drivers/media/video/bt8xx/bt832.c index f1309d94e96..a5187613788 100644 --- a/drivers/media/video/bt8xx/bt832.c +++ b/drivers/media/video/bt8xx/bt832.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include "bttv.h" diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index e869bfbab37..f209a749205 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -39,6 +39,7 @@ #include "bttvp.h" #include +#include /* fwd decl */ static void boot_msp34xx(struct bttv *btv, int pin); @@ -336,7 +337,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 0, 10 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -350,7 +352,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -364,7 +367,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 4, 0, 2, 3, 1 }, + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, @@ -383,7 +387,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = 4, .tuner_addr = ADDR_UNSET, @@ -397,7 +401,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0, 1, 0, 1, 3 }, + .gpiomux = { 0, 1, 0, 1 }, + .gpiomute = 3, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -411,7 +416,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .muxsel = { 2, 3, 1, 1 }, .gpiomask = 0x0f, - .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0 }, + .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, /* 0x04 for some cards ?? */ .needs_tvaudio = 1, .tuner_type = -1, @@ -428,7 +433,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -444,7 +449,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0 }, + .gpiomux = { 0, 0xc00, 0x800, 0x400 }, + .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -459,7 +465,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 1, 2, 3, 0 }, + .gpiomux = { 1, 1, 2, 3 }, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, @@ -474,7 +480,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x0f, /* old: 7 */ .muxsel = { 2, 0, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -489,7 +496,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3014f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20001,0x10001, 0, 0,10 }, + .gpiomux = { 0x20001,0x10001, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -505,7 +513,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 13, 14, 11, 7, 0, 0 }, + .gpiomux = { 13, 14, 11, 7 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -519,7 +527,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 13, 14, 11, 7, 0, 0 }, + .gpiomux = { 13, 14, 11, 7 }, .needs_tvaudio = 1, .msp34xx_alt = 1, .pll = PLL_28, @@ -537,7 +545,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 2, 1, 3, 4 }, /* old: {0, 1, 2, 3, 4} */ + .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ + .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -552,7 +561,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 , 0, 1 , 0, 10 }, + .gpiomux = { 0, 0, 1, 0 }, + .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -570,10 +580,11 @@ struct tvcard bttv_tvcards[] = { .muxsel = { 2, 3, 1, 1 }, #if 0 /* old */ - .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 }, + .gpiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000 }, #else /* 2003-10-20 by "Anton A. Arapov" */ - .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, #endif .needs_tvaudio = 1, .pll = PLL_28, @@ -587,7 +598,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x8300f8, .muxsel = { 2, 3, 1, 1,0 }, - .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007 }, + .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, + .gpiomute = 0xcfa007, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -603,7 +615,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 0, 0, 0, 0 }, + .gpiomux = { 1, 0, 0, 0 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -617,7 +629,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0x8dff00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -644,7 +656,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -658,7 +671,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 0x800, 0x400, 0xc00, 0 }, + .gpiomux = { 0, 1, 0x800, 0x400 }, + .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -674,7 +688,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 7, .muxsel = { 2, 3, -1 }, .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0, 0, 0, 0, 0 }, + .gpiomux = { 0, 0, 0, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSBB5_PAL_I, @@ -691,7 +705,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00 }, + .gpiomux = {0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -707,7 +722,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000 }, + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -722,7 +738,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 7, .muxsel = { 2, 0, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -736,7 +753,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_SECAM, .tuner_addr = ADDR_UNSET, @@ -752,7 +770,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000 }, + .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, + .gpiomute = 0x40000, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -799,7 +818,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, /* was: 4 */ .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -815,7 +834,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, /* 0x8dfe00 */ .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, + .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -829,7 +849,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 1, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 0, 0, 0, 0 }, + .gpiomux = { 1, 0, 0, 0 }, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -845,7 +865,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = 4, .tuner_addr = ADDR_UNSET, @@ -859,7 +879,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x500, 0, 0x300, 0x900, 0x900 }, + .gpiomux = { 0x500, 0, 0x300, 0x900 }, + .gpiomute = 0x900, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -875,11 +896,12 @@ struct tvcard bttv_tvcards[] = { .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */ #if 0 .gpiomask = 0xc33000, - .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 }, + .gpiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 }, #else /* Alexander Varakin [stereo version] */ .gpiomask = 0xb33000, - .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 }, + .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, + .gpiomute = 0x800000, #endif /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) gpio23 -- hef4052:nEnable (0x800000) @@ -909,7 +931,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -925,7 +948,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -940,7 +964,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xff, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -955,7 +980,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x551e00, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, + .gpiomux = { 0x551400, 0x551200, 0, 0 }, + .gpiomute = 0x551c00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 1, @@ -971,7 +997,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0xd0001, 0, 0, 1 }, + .gpiomux = { 2, 0xd0001, 0, 0 }, + .gpiomute = 1, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = -1, @@ -988,7 +1015,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 4, 0, 2, 3, 1 }, + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, @@ -1005,7 +1033,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 13, 4, 11, 7, 0, 0 }, + .gpiomux = { 13, 4, 11, 7 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -1022,7 +1050,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0, 0, 0, 0}, + .gpiomux = { 0, 0, 0, 0}, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, @@ -1038,7 +1066,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xe00b, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc }, + .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, + .gpiomute = 0xff3ffc, .no_msp34xx = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -1054,7 +1083,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 1, 0, 2, 3 }, + .gpiomux = { 1, 1, 0, 2 }, + .gpiomute = 3, .no_msp34xx = 1, .pll = PLL_NONE, .tuner_type = -1, @@ -1069,7 +1099,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -1084,7 +1114,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xbcf03f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f }, + .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, + .gpiomute = 0xbcb03f, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 21, @@ -1099,7 +1130,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x70000, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 }, + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_35, @@ -1118,7 +1150,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = {2,0,0,0,1 }, + .gpiomux = {2,0,0,0 }, + .gpiomute = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -1133,7 +1166,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0 }, - .audiomux = {0x10000, 0, 0x10000, 0, 0, 0 }, + .gpiomux = {0x10000, 0, 0x10000, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSHC6_NTSC, @@ -1150,7 +1183,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0xAA0000, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, + .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, + .gpiomute = 0xa8000, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, @@ -1175,7 +1209,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 0, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .pll = PLL_28, .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */, .tuner_addr = ADDR_UNSET, @@ -1192,7 +1227,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 0xd0001, 0, 0, 10 }, + .gpiomux = { 1, 0xd0001, 0, 0 }, + .gpiomute = 10, /* sound path (5 sources): MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 0= ext. Audio IN @@ -1218,7 +1254,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1c, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0, 0x10, 8, 4 }, + .gpiomux = { 0, 0, 0x10, 8 }, + .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1230,7 +1267,7 @@ struct tvcard bttv_tvcards[] = { /* Tim Röstermundt in de.comp.os.unix.linux.hardware: options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 - audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff + gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff options tuner type=5 */ .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", .video_inputs = 4, @@ -1239,7 +1276,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x18e0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x18e0, /* For cards with tda9820/tda9821: 0x0000: Tuner normal stereo 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) @@ -1259,7 +1297,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xF, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 2, 0, 0, 0, 10 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, @@ -1277,7 +1316,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = 5, .tuner_addr = ADDR_UNSET, @@ -1294,7 +1334,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, .gpiomask = 0, .muxsel = { 3, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_35, @@ -1311,7 +1351,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, + .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0x800, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4036FY5_NTSC, @@ -1327,7 +1368,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 2, 0, 0, 0, 1 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, .pll = PLL_28, .tuner_type = 0, .tuner_addr = ADDR_UNSET, @@ -1344,7 +1386,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 11, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 1, 8 }, + .gpiomux = { 2, 0, 0, 1 }, + .gpiomute = 8, .pll = PLL_35, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, @@ -1359,7 +1402,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, .gpiomask = 0xF, .muxsel = { 2, 2 }, - .audiomux = { }, + .gpiomux = { }, .no_msp34xx = 1, .needs_tvaudio = 0, .pll = PLL_28, @@ -1378,7 +1421,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 1, 0, 4, 4, 9 }, + .gpiomux = { 1, 0, 4, 4 }, + .gpiomute = 9, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1394,7 +1438,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xf03f, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe }, + .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, + .gpiomute = 0xbffe, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, .tuner_addr = ADDR_UNSET, @@ -1411,7 +1456,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 1, .muxsel = { 2, 3, 0, 1 }, - .audiomux = { 0, 0, 1, 0, 0 }, + .gpiomux = { 0, 0, 1, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, @@ -1430,7 +1475,8 @@ struct tvcard bttv_tvcards[] = { /* Radio changed from 1e80 to 0x800 to make FlyVideo2000S in .hu happy (gm)*/ /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ - .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 }, + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x1800, .audio_hook = fv2000s_audio, .no_msp34xx = 1, .no_tda9875 = 1, @@ -1448,7 +1494,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900 }, + .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, + .gpiomute = 0x900, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1465,7 +1512,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0 }, - .audiomux = {0x10000, 0, 0x10000, 0, 0, 0 }, + .gpiomux = {0x10000, 0, 0x10000, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, @@ -1486,7 +1533,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x4f8a00, /* 0x100000: 1=MSP enabled (0=disable again) * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ - .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, + .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, + .gpiomute = 0x947fff, /* tvtuner, radio, external,internal, mute, stereo * tuner, Composit, SVid, Composit-on-Svid-adapter */ .muxsel = { 2, 3 ,0 ,1 }, @@ -1518,7 +1566,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0, 11, 7, 13, 0 }, /* TV and Radio with same GPIO ! */ + .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ + .gpiomute = 13, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 25, @@ -1557,7 +1606,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, + .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, + .gpiomute = 0x09, .needs_tvaudio = 1, .no_msp34xx = 1, .no_tda9875 = 1, @@ -1586,7 +1636,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 4, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -1618,7 +1668,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ .muxsel = { 2, 1, 1, }, - .audiomux = { 0, 1, 2, 2, 4 }, + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 4, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1637,7 +1688,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x140007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4, 0 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -1651,7 +1703,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -1667,13 +1719,14 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */ - .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio! + .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! * This card lacks external Audio In, so we mute it on Ext. & Int. * The PCB can take a sbx1637/sbx1673, wiring unknown. * This card lacks PCI subsystem ID, sigh. - * audiomux=1: lower volume, 2+3: mute + * gpiomux =1: lower volume, 2+3: mute * btwincap uses 0x80000/0x80003 */ + .gpiomute = 4, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -1720,7 +1773,7 @@ struct tvcard bttv_tvcards[] = { .radio_addr = ADDR_UNSET, .gpiomask = 7, - .audiomux = {7}, + .gpiomux = {7}, }, [BTTV_BOARD_GVBCTV5PCI] = { .name = "IODATA GV-BCTV5/PCI", @@ -1730,7 +1783,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x0f0f80, .muxsel = {2, 3, 1, 0 }, - .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0}, + .gpiomux = {0x030000, 0x010000, 0, 0 }, + .gpiomute = 0x020000, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, @@ -1960,7 +2014,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 2, /* TV, Comp1, Composite over SVID con, SVID */ .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 2, 0, 0, 0 }, + .gpiomux = { 2, 2, 0, 0 }, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, @@ -1984,7 +2038,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, + .gpiomux = { 0, 1, 2, 3}, + .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = 5, .tuner_addr = ADDR_UNSET, @@ -2016,7 +2071,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -2035,7 +2090,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x001e8007, .muxsel = { 2, 3, 1, 0 }, /* Tuner, Radio, external, internal, off, on */ - .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 }, + .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, + .gpiomute = 0x0f, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -2152,7 +2208,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -2169,7 +2225,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2184,7 +2240,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2204,7 +2260,7 @@ struct tvcard bttv_tvcards[] = { via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2222,7 +2278,7 @@ struct tvcard bttv_tvcards[] = { via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2310,7 +2366,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 1, 1, 1, 0 }, + .gpiomux = { 1, 1, 1, 1 }, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2341,7 +2397,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x008007, .muxsel = { 2, 3, 0, 0 }, - .audiomux = { 0, 0, 0, 0, 0x000003, 0 }, + .gpiomux = { 0, 0, 0, 0 }, + .gpiomute = 0x000003, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2377,7 +2434,7 @@ struct tvcard bttv_tvcards[] = { .needs_tvaudio = 0, .gpiomask = 0x68, .muxsel = { 2, 3, 1 }, - .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 }, + .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, .pll = PLL_28, }, @@ -2392,7 +2449,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x008007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 2, 3 }, + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -2417,7 +2475,7 @@ struct tvcard bttv_tvcards[] = { .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/ - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .pll = PLL_28, .needs_tvaudio = 0, .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ @@ -2435,7 +2493,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x0000000f, .muxsel = { 2, 1, 1 }, - .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00 }, + .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -2491,7 +2549,7 @@ struct tvcard bttv_tvcards[] = { .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 }, .muxsel_hook = sigmaSQ_muxsel, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -2508,7 +2566,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x0, .muxsel = { 2, 2, 2, 2 }, .muxsel_hook = sigmaSLC_muxsel, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -2526,7 +2584,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 0, 10 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -2560,7 +2619,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3f, .muxsel = {2, 3, 1, 0 }, - .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31 }, + .gpiomux = {0x31, 0x31, 0x31, 0x31 }, + .gpiomute = 0x31, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, @@ -2583,7 +2643,7 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x008007, - .audiomux = { 0, 0x000001,0,0, 0 }, + .gpiomux = { 0, 0x000001,0,0 }, .needs_tvaudio = 1, .has_radio = 1, }, @@ -2693,7 +2753,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .muxsel = { 2, 3, 1 }, .gpiomask = 0x00e00007, - .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, + .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, + .gpiomute = 0x00c00007, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, @@ -2709,7 +2770,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x01fe00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, @@ -2726,7 +2788,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x001c0007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 2, 3 }, + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TENA_9533_DI, @@ -2745,7 +2808,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x01fe00, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 }, + .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, + .gpiomute = 0x12400, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_LG_PAL_FM, @@ -2763,7 +2827,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF_5533MF, @@ -2797,7 +2862,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 0, 1 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 2, @@ -2813,7 +2879,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x108007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 100000, 100002, 100002, 100000 }, + .gpiomux = { 100000, 100002, 100002, 100000 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, @@ -2853,7 +2919,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .tuner_type = TUNER_TEMIC_4009FR5_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -2925,20 +2992,20 @@ void __devinit bttv_idcard(struct bttv *btv) if (UNSET != audiomux[0]) { gpiobits = 0; for (i = 0; i < 5; i++) { - bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i]; + bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; gpiobits |= audiomux[i]; } } else { gpiobits = audioall; for (i = 0; i < 5; i++) { - bttv_tvcards[btv->c.type].audiomux[i] = audioall; + bttv_tvcards[btv->c.type].gpiomux[i] = audioall; } } bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", btv->c.nr,bttv_tvcards[btv->c.type].gpiomask); for (i = 0; i < 5; i++) { - printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]); + printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); } printk("\n"); } @@ -3796,18 +3863,18 @@ void bttv_tda9880_setnorm(struct bttv *btv, int norm) { /* fix up our card entry */ if(norm==VIDEO_MODE_NTSC) { - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff; - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff; dprintk("bttv_tda9880_setnorm to NTSC\n"); } else { - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff; - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff; dprintk("bttv_tda9880_setnorm to PAL\n"); } /* set GPIO according */ gpio_bits(bttv_tvcards[btv->c.type].gpiomask, - bttv_tvcards[btv->c.type].audiomux[btv->audio]); + bttv_tvcards[btv->c.type].gpiomux[btv->audio]); } diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 71535775f2e..be567ec9e14 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -36,6 +36,7 @@ #include #include "bttvp.h" #include +#include #include @@ -926,45 +927,65 @@ video_mux(struct bttv *btv, unsigned int input) static char *audio_modes[] = { "audio: tuner", "audio: radio", "audio: extern", - "audio: intern", "audio: off" + "audio: intern", "audio: mute" }; static int -audio_mux(struct bttv *btv, int mode) +audio_mux(struct bttv *btv, int input, int mute) { - int val,mux,i2c_mux,signal; + int gpio_val, signal; + struct v4l2_audio aud_input; + struct v4l2_control ctrl; + struct i2c_client *c; + memset(&aud_input, 0, sizeof(aud_input)); gpio_inout(bttv_tvcards[btv->c.type].gpiomask, bttv_tvcards[btv->c.type].gpiomask); signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; - switch (mode) { - case AUDIO_MUTE: - btv->audio |= AUDIO_MUTE; - break; - case AUDIO_UNMUTE: - btv->audio &= ~AUDIO_MUTE; - break; - case AUDIO_TUNER: - case AUDIO_RADIO: - case AUDIO_EXTERN: - case AUDIO_INTERN: - btv->audio &= AUDIO_MUTE; - btv->audio |= mode; - } - i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio; - if (btv->opt_automute && !signal && !btv->radio_user) - mux = AUDIO_OFF; - - val = bttv_tvcards[btv->c.type].audiomux[mux]; - gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val); + btv->mute = mute; + btv->audio = input; + + /* automute */ + mute = mute || (btv->opt_automute && !signal && !btv->radio_user); + + if (mute) + gpio_val = bttv_tvcards[btv->c.type].gpiomute; + else + gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; + aud_input.index = btv->audio; + + gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); if (bttv_gpio) - bttv_gpio_tracking(btv,audio_modes[mux]); - if (!in_interrupt()) - bttv_call_i2c_clients(btv,AUDC_SET_INPUT,&(i2c_mux)); + bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]); + if (in_interrupt()) + return 0; + + ctrl.id = V4L2_CID_AUDIO_MUTE; + /* take automute into account, just btv->mute is not enough */ + ctrl.value = mute; + bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl); + c = btv->i2c_msp34xx_client; + if (c) + c->driver->command(c, VIDIOC_S_AUDIO, &aud_input); + c = btv->i2c_tvaudio_client; + if (c) + c->driver->command(c, VIDIOC_S_AUDIO, &aud_input); return 0; } +static inline int +audio_mute(struct bttv *btv, int mute) +{ + return audio_mux(btv, btv->audio, mute); +} + +static inline int +audio_input(struct bttv *btv, int input) +{ + return audio_mux(btv, input, btv->mute); +} + static void i2c_vidiocschan(struct bttv *btv) { @@ -1023,8 +1044,8 @@ set_input(struct bttv *btv, unsigned int input) } else { video_mux(btv,input); } - audio_mux(btv,(input == bttv_tvcards[btv->c.type].tuner ? - AUDIO_TUNER : AUDIO_EXTERN)); + audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ? + TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN)); set_tvnorm(btv,btv->tvnorm); i2c_vidiocschan(btv); } @@ -1236,10 +1257,10 @@ static int set_control(struct bttv *btv, struct v4l2_control *c) case V4L2_CID_AUDIO_MUTE: if (c->value) { va.flags |= VIDEO_AUDIO_MUTE; - audio_mux(btv, AUDIO_MUTE); + audio_mute(btv, 1); } else { va.flags &= ~VIDEO_AUDIO_MUTE; - audio_mux(btv, AUDIO_UNMUTE); + audio_mute(btv, 0); } break; @@ -1654,7 +1675,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) return -EINVAL; mutex_lock(&btv->lock); - audio_mux(btv, (v->flags&VIDEO_AUDIO_MUTE) ? AUDIO_MUTE : AUDIO_UNMUTE); + audio_mute(btv, (v->flags&VIDEO_AUDIO_MUTE) ? 1 : 0); bttv_call_i2c_clients(btv,cmd,v); /* card specific hooks */ @@ -3163,8 +3184,8 @@ static int radio_open(struct inode *inode, struct file *file) file->private_data = btv; - bttv_call_i2c_clients(btv,AUDC_SET_RADIO,&btv->tuner_type); - audio_mux(btv,AUDIO_RADIO); + bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL); + audio_input(btv,TVAUDIO_INPUT_RADIO); mutex_unlock(&btv->lock); return 0; @@ -3750,7 +3771,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) bttv_irq_switch_video(btv); if ((astat & BT848_INT_HLOCK) && btv->opt_automute) - audio_mux(btv, -1); + audio_mute(btv, btv->mute); /* trigger automute */ if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) { printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr, @@ -4051,7 +4072,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, bt848_contrast(btv,32768); bt848_hue(btv,32768); bt848_sat(btv,32768); - audio_mux(btv,AUDIO_MUTE); + audio_mute(btv, 1); set_input(btv,0); } diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c index 614c1201855..4b562b386fc 100644 --- a/drivers/media/video/bt8xx/bttv-i2c.c +++ b/drivers/media/video/bt8xx/bttv-i2c.c @@ -302,6 +302,10 @@ static int attach_inform(struct i2c_client *client) if (!client->driver->command) return 0; + if (client->driver->id == I2C_DRIVERID_MSP3400) + btv->i2c_msp34xx_client = client; + if (client->driver->id == I2C_DRIVERID_TVAUDIO) + btv->i2c_tvaudio_client = client; if (btv->tuner_type != UNSET) { struct tuner_setup tun_setup; diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index ebde3e8219c..3a23265c153 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -234,7 +234,8 @@ struct tvcard unsigned int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO u32 gpiomask; u32 muxsel[16]; - u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ + u32 gpiomux[4]; /* Tuner, Radio, external, internal */ + u32 gpiomute; /* GPIO mute setting */ u32 gpiomask2; /* GPIO MUX mask */ /* i2c audio flags */ diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 12223a20396..ee989d2e15d 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -41,7 +41,6 @@ #include #include -#include #include #include #include @@ -299,6 +298,8 @@ struct bttv { int i2c_state, i2c_rc; int i2c_done; wait_queue_head_t i2c_queue; + struct i2c_client *i2c_msp34xx_client; + struct i2c_client *i2c_tvaudio_client; /* video4linux (1) */ struct video_device *video_dev; @@ -321,6 +322,7 @@ struct bttv { /* video state */ unsigned int input; unsigned int audio; + unsigned int mute; unsigned long freq; int tvnorm,hue,contrast,bright,saturation; struct v4l2_framebuffer fbuf; diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index 8739c64785e..bc333187024 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -75,11 +75,6 @@ static int cs53l32a_command(struct i2c_client *client, unsigned int cmd, cs53l32a_write(client, 0x01, 0x01 + (input->index << 4)); break; - case VIDIOC_G_AUDIO: - memset(input, 0, sizeof(*input)); - input->index = (cs53l32a_read(client, 0x01) >> 4) & 3; - break; - case VIDIOC_G_CTRL: if (ctrl->id == V4L2_CID_AUDIO_MUTE) { ctrl->value = (cs53l32a_read(client, 0x03) & 0xc0) != 0; diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c index cb9a7981e40..a4540e858f2 100644 --- a/drivers/media/video/cx25840/cx25840-audio.c +++ b/drivers/media/video/cx25840/cx25840-audio.c @@ -18,7 +18,6 @@ #include #include -#include #include #include "cx25840.h" diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index bcb7ef85eb2..7aee37645d6 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include "cx25840.h" @@ -764,16 +763,6 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, return set_input(client, state->vid_input, input->index); } - case VIDIOC_G_AUDIO: - { - struct v4l2_audio *input = arg; - - memset(input, 0, sizeof(*input)); - input->index = state->aud_input; - input->capability = V4L2_AUDCAP_STEREO; - break; - } - case VIDIOC_S_FREQUENCY: input_change(client); break; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 5b2e499eab2..326a25f147f 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -27,7 +27,6 @@ #include #include -#include #include #include diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 11ea9765769..bd0b036c5ca 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -53,7 +53,7 @@ #include #include #include -#include +#include #include #include #include "msp3400.h" @@ -585,51 +585,12 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct msp_state *state = i2c_get_clientdata(client); - u16 *sarg = arg; int scart = 0; if (msp_debug >= 2) v4l_i2c_print_ioctl(client, cmd); switch (cmd) { - case AUDC_SET_INPUT: - if (*sarg == state->input) - break; - state->input = *sarg; - switch (*sarg) { - case AUDIO_RADIO: - /* Hauppauge uses IN2 for the radio */ - state->mode = MSP_MODE_FM_RADIO; - scart = SCART_IN2; - break; - case AUDIO_EXTERN_1: - /* IN1 is often used for external input ... */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN1; - break; - case AUDIO_EXTERN_2: - /* ... sometimes it is IN2 through ;) */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN2; - break; - case AUDIO_TUNER: - state->mode = -1; - break; - default: - if (*sarg & AUDIO_MUTE) - msp_set_scart(client, SCART_MUTE, 0); - break; - } - if (scart) { - state->rxsubchans = V4L2_TUNER_SUB_STEREO; - msp_set_scart(client, scart, 0); - msp_write_dsp(client, 0x000d, 0x1900); - if (state->opmode != OPMODE_AUTOSELECT) - msp_set_audmode(client); - } - msp_wake_thread(client); - break; - case AUDC_SET_RADIO: if (state->radio) return 0; @@ -750,82 +711,27 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - - if (i->index != 0) - return -EINVAL; - - i->type = V4L2_INPUT_TYPE_TUNER; - switch (i->index) { - case AUDIO_RADIO: - strcpy(i->name, "Radio"); - break; - case AUDIO_EXTERN_1: - strcpy(i->name, "Extern 1"); - break; - case AUDIO_EXTERN_2: - strcpy(i->name, "Extern 2"); - break; - case AUDIO_TUNER: - strcpy(i->name, "Television"); - break; - default: - return -EINVAL; - } - return 0; - } - - case VIDIOC_G_AUDIO: - { - struct v4l2_audio *a = arg; - - memset(a, 0, sizeof(*a)); - - switch (a->index) { - case AUDIO_RADIO: - strcpy(a->name, "Radio"); - break; - case AUDIO_EXTERN_1: - strcpy(a->name, "Extern 1"); - break; - case AUDIO_EXTERN_2: - strcpy(a->name, "Extern 2"); - break; - case AUDIO_TUNER: - strcpy(a->name, "Television"); - break; - default: - return -EINVAL; - } - - a->capability = V4L2_AUDCAP_STEREO; - a->mode = 0; /* TODO: add support for AVL */ - break; - } - case VIDIOC_S_AUDIO: { struct v4l2_audio *sarg = arg; switch (sarg->index) { - case AUDIO_RADIO: + case TVAUDIO_INPUT_RADIO: /* Hauppauge uses IN2 for the radio */ state->mode = MSP_MODE_FM_RADIO; scart = SCART_IN2; break; - case AUDIO_EXTERN_1: + case TVAUDIO_INPUT_EXTERN: /* IN1 is often used for external input ... */ state->mode = MSP_MODE_EXTERN; scart = SCART_IN1; break; - case AUDIO_EXTERN_2: + case TVAUDIO_INPUT_INTERN: /* ... sometimes it is IN2 through ;) */ state->mode = MSP_MODE_EXTERN; scart = SCART_IN2; break; - case AUDIO_TUNER: + case TVAUDIO_INPUT_TUNER: state->mode = -1; break; } diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index 852ab6a115f..71a944b447e 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include "msp3400.h" diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index b184fd00b4e..b0501528260 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -40,7 +40,6 @@ #include #include #include -#include #include MODULE_DESCRIPTION("Philips SAA7113/SAA7114/SAA7115 video decoder driver"); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 104bd2e054e..31ba293854c 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -34,7 +34,6 @@ #include #include -#include #include #include #include diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index 12b8981efd1..78e043ac9ea 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -48,7 +48,6 @@ #include #include -#include #include #include diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index ccfd3b90ea9..103ccb91929 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -30,7 +30,6 @@ #include #include -#include #include @@ -47,7 +46,6 @@ I2C_CLIENT_INSMOD; /* This is a superset of the TDA9875 */ struct tda9875 { - int mode; int rvol, lvol; int bass, treble; struct i2c_client c; @@ -197,7 +195,6 @@ static void do_tda9875_init(struct i2c_client *client) tda9875_write(client, TDA9875_MUT, 0xcc ); /* General mute */ - t->mode=AUDIO_UNMUTE; t->lvol=t->rvol =0; /* 0dB */ t->bass=0; /* 0dB */ t->treble=0; /* 0dB */ diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 32e1849441f..df195c90536 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -21,7 +21,6 @@ #include #include -#include #define UNSET (-1U) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 4cc0497dcbd..15fd55ff69c 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -30,7 +30,7 @@ #include #include -#include +#include #include #include @@ -102,7 +102,7 @@ struct CHIPDESC { /* input switch register + values for v4l inputs */ int inputreg; - int inputmap[8]; + int inputmap[4]; int inputmute; int inputmask; }; @@ -119,9 +119,10 @@ struct CHIPSTATE { audiocmd shadow; /* current settings */ - __u16 left,right,treble,bass,mode; + __u16 left,right,treble,bass,muted,mode; int prevmode; int radio; + int input; /* thread */ pid_t tpid; @@ -1101,9 +1102,8 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { struct CHIPDESC *desc = chiplist + chip->type; - int inputmap[8] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, - /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF, - /* off */ TDA8425_S1_OFF, /* on */ TDA8425_S1_CH2}; + int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, + /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; if (chip->c.adapter->id == I2C_HW_B_RIVA) { memcpy (desc->inputmap, inputmap, sizeof (inputmap)); @@ -1298,7 +1298,7 @@ static struct CHIPDESC chiplist[] = { .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, .inputmute = TDA9873_MUTE | TDA9873_AUTOMUTE, - .inputmap = {0xa0, 0xa2, 0xa0, 0xa0, 0xc0}, + .inputmap = {0xa0, 0xa2, 0xa0, 0xa0}, .inputmask = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE, }, @@ -1446,8 +1446,7 @@ static struct CHIPDESC chiplist[] = { .inputmap = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER, PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, - PIC16C54_MISC_SND_MUTE,PIC16C54_MISC_SND_MUTE, - PIC16C54_MISC_SND_NOTMUTE}, + PIC16C54_MISC_SND_MUTE}, .inputmute = PIC16C54_MISC_SND_MUTE, }, { @@ -1583,28 +1582,40 @@ static int chip_detach(struct i2c_client *client) return 0; } +static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) +{ + struct CHIPDESC *desc = chiplist + chip->type; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value < 0 || ctrl->value >= 2) + return -ERANGE; + chip->muted = ctrl->value; + if (chip->muted) + chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask); + else + chip_write_masked(chip,desc->inputreg, + desc->inputmap[chip->input],desc->inputmask); + break; + default: + return -EINVAL; + } + return 0; +} + + /* ---------------------------------------------------------------------- */ /* video4linux interface */ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { - __u16 *sarg = arg; struct CHIPSTATE *chip = i2c_get_clientdata(client); struct CHIPDESC *desc = chiplist + chip->type; v4l_dbg(1, debug, &chip->c, "%s: chip_command 0x%x\n", chip->c.name, cmd); switch (cmd) { - case AUDC_SET_INPUT: - if (desc->flags & CHIP_HAS_INPUTSEL) { - if (*sarg & 0x80) - chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask); - else - chip_write_masked(chip,desc->inputreg,desc->inputmap[*sarg],desc->inputmask); - } - break; - case AUDC_SET_RADIO: chip->radio = 1; chip->watch_stereo = 0; @@ -1668,6 +1679,24 @@ static int chip_command(struct i2c_client *client, break; } + case VIDIOC_S_CTRL: + return tvaudio_set_ctrl(chip, arg); + + case VIDIOC_S_AUDIO: + { + struct v4l2_audio *sarg = arg; + + if (!(desc->flags & CHIP_HAS_INPUTSEL) || sarg->index >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = sarg->index; + if (chip->muted) + break; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + break; + } + case VIDIOC_S_TUNER: { struct v4l2_tuner *vt = arg; diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 582551b0969..e0d2ff83fc9 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -248,32 +248,32 @@ audioIC[] = {AUDIO_CHIP_MSP34XX, "MSP3410D"}, {AUDIO_CHIP_MSP34XX, "MSP3415"}, {AUDIO_CHIP_MSP34XX, "MSP3430"}, - {AUDIO_CHIP_UNKNOWN, "MSP3438"}, + {AUDIO_CHIP_MSP34XX, "MSP3438"}, {AUDIO_CHIP_UNKNOWN, "CS5331"}, /* 10-14 */ {AUDIO_CHIP_MSP34XX, "MSP3435"}, {AUDIO_CHIP_MSP34XX, "MSP3440"}, {AUDIO_CHIP_MSP34XX, "MSP3445"}, - {AUDIO_CHIP_UNKNOWN, "MSP3411"}, - {AUDIO_CHIP_UNKNOWN, "MSP3416"}, + {AUDIO_CHIP_MSP34XX, "MSP3411"}, + {AUDIO_CHIP_MSP34XX, "MSP3416"}, /* 15-19 */ {AUDIO_CHIP_MSP34XX, "MSP3425"}, - {AUDIO_CHIP_UNKNOWN, "MSP3451"}, - {AUDIO_CHIP_UNKNOWN, "MSP3418"}, + {AUDIO_CHIP_MSP34XX, "MSP3451"}, + {AUDIO_CHIP_MSP34XX, "MSP3418"}, {AUDIO_CHIP_UNKNOWN, "Type 0x12"}, {AUDIO_CHIP_UNKNOWN, "OKI7716"}, /* 20-24 */ - {AUDIO_CHIP_UNKNOWN, "MSP4410"}, - {AUDIO_CHIP_UNKNOWN, "MSP4420"}, - {AUDIO_CHIP_UNKNOWN, "MSP4440"}, - {AUDIO_CHIP_UNKNOWN, "MSP4450"}, - {AUDIO_CHIP_UNKNOWN, "MSP4408"}, + {AUDIO_CHIP_MSP34XX, "MSP4410"}, + {AUDIO_CHIP_MSP34XX, "MSP4420"}, + {AUDIO_CHIP_MSP34XX, "MSP4440"}, + {AUDIO_CHIP_MSP34XX, "MSP4450"}, + {AUDIO_CHIP_MSP34XX, "MSP4408"}, /* 25-29 */ - {AUDIO_CHIP_UNKNOWN, "MSP4418"}, - {AUDIO_CHIP_UNKNOWN, "MSP4428"}, - {AUDIO_CHIP_UNKNOWN, "MSP4448"}, - {AUDIO_CHIP_UNKNOWN, "MSP4458"}, - {AUDIO_CHIP_UNKNOWN, "Type 0x1d"}, + {AUDIO_CHIP_MSP34XX, "MSP4418"}, + {AUDIO_CHIP_MSP34XX, "MSP4428"}, + {AUDIO_CHIP_MSP34XX, "MSP4448"}, + {AUDIO_CHIP_MSP34XX, "MSP4458"}, + {AUDIO_CHIP_MSP34XX, "Type 0x1d"}, /* 30-34 */ {AUDIO_CHIP_INTERNAL, "CX880"}, {AUDIO_CHIP_INTERNAL, "CX881"}, diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 1717663d3e5..d1234d781e1 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -312,7 +312,6 @@ static const char *v4l2_int_ioctls[] = { [_IOC_NR(DECODER_DUMP)] = "DECODER_DUMP", #endif [_IOC_NR(AUDC_SET_RADIO)] = "AUDC_SET_RADIO", - [_IOC_NR(AUDC_SET_INPUT)] = "AUDC_SET_INPUT", [_IOC_NR(MSP_SET_MATRIX)] = "MSP_SET_MATRIX", [_IOC_NR(TUNER_SET_TYPE_ADDR)] = "TUNER_SET_TYPE_ADDR", @@ -419,7 +418,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) case TUNER_SET_TYPE_ADDR: case TUNER_SET_STANDBY: case TDA9887_SET_CONFIG: - case AUDC_SET_INPUT: case VIDIOC_OVERLAY_OLD: case VIDIOC_STREAMOFF: case VIDIOC_G_OUTPUT: diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 8cb64f8a8a9..9b90225226e 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -102,11 +102,6 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd, wm8775_write(client, R21, 0x100 + state->input); break; - case VIDIOC_G_AUDIO: - memset(input, 0, sizeof(*input)); - input->index = state->input; - break; - case VIDIOC_G_CTRL: if (ctrl->id != V4L2_CID_AUDIO_MUTE) return -EINVAL; diff --git a/include/media/audiochip.h b/include/media/audiochip.h index 295d256ee81..1fd4a220757 100644 --- a/include/media/audiochip.h +++ b/include/media/audiochip.h @@ -21,18 +21,4 @@ enum audiochip { AUDIO_CHIP_MSP34XX }; -/* ---------------------------------------------------------------------- */ - -/* audio inputs */ -#define AUDIO_TUNER 0x00 -#define AUDIO_RADIO 0x01 -#define AUDIO_EXTERN 0x02 -#define AUDIO_INTERN 0x03 -#define AUDIO_OFF 0x04 -#define AUDIO_ON 0x05 -#define AUDIO_EXTERN_1 AUDIO_EXTERN -#define AUDIO_EXTERN_2 0x06 -#define AUDIO_MUTE 0x80 -#define AUDIO_UNMUTE 0x81 - #endif /* AUDIOCHIP_H */ diff --git a/include/media/tvaudio.h b/include/media/tvaudio.h new file mode 100644 index 00000000000..6915aafc875 --- /dev/null +++ b/include/media/tvaudio.h @@ -0,0 +1,30 @@ +/* + tvaudio.h - definition for tvaudio inputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _TVAUDIO_H +#define _TVAUDIO_H + +/* The tvaudio module accepts the following inputs: */ +#define TVAUDIO_INPUT_TUNER 0 +#define TVAUDIO_INPUT_RADIO 1 +#define TVAUDIO_INPUT_EXTERN 2 +#define TVAUDIO_INPUT_INTERN 3 + +#endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 2360453e749..07130474a0d 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -123,9 +123,6 @@ enum v4l2_chip_ident { /* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */ #define AUDC_SET_RADIO _IO('d',88) -/* select from TV,radio,extern,MUTE, to be replaced with VIDIOC_INT_S_AUDIO_ROUTING */ -#define AUDC_SET_INPUT _IOW('d',89,int) - /* msp3400 ioctl: will be removed in the near future, to be replaced by VIDIOC_INT_S_AUDIO_ROUTING. */ struct msp_matrix { @@ -209,10 +206,10 @@ struct v4l2_routing { }; /* These internal commands should be used to define the inputs and outputs - of an audio/video chip. They will replace AUDC_SET_INPUT. - The v4l2 API commands VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, - VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT are meant to be used by the - user. Internally these commands should be used to switch inputs/outputs + of an audio/video chip. They will replace the v4l2 API commands + VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT + that are meant to be used by the user. + The internal commands should be used to switch inputs/outputs because only the driver knows how to map a 'Television' input to the precise input/output routing of an A/D converter, or a DSP, or a video digitizer. These four commands should only be sent directly to an i2c device, they -- cgit v1.2.3-70-g09d2 From 2474ed444b475614ef795523076be7cc8437ae00 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 19 Mar 2006 12:35:57 -0300 Subject: V4L/DVB (3582): Implement correct msp3400 input/output routing - implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio - use the new command in bttv, pvrusb2 and em28xx. - remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!) - remove the obsolete VIDIOC_S_AUDIO from msp3400. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 52 +++++++++++--- drivers/media/video/em28xx/em28xx-cards.c | 8 ++- drivers/media/video/em28xx/em28xx-video.c | 8 ++- drivers/media/video/msp3400-driver.c | 67 +++++++++--------- drivers/media/video/msp3400-driver.h | 4 +- drivers/media/video/msp3400-kthreads.c | 111 ++++++++++++++++-------------- drivers/media/video/tvaudio.c | 24 +++++++ drivers/media/video/v4l2-common.c | 13 +--- include/media/msp3400.h | 5 ++ include/media/v4l2-common.h | 8 --- 10 files changed, 181 insertions(+), 119 deletions(-) (limited to 'include/media/v4l2-common.h') diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index be567ec9e14..80e4a7406ac 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -37,6 +37,7 @@ #include "bttvp.h" #include #include +#include #include @@ -934,11 +935,9 @@ static int audio_mux(struct bttv *btv, int input, int mute) { int gpio_val, signal; - struct v4l2_audio aud_input; struct v4l2_control ctrl; struct i2c_client *c; - memset(&aud_input, 0, sizeof(aud_input)); gpio_inout(bttv_tvcards[btv->c.type].gpiomask, bttv_tvcards[btv->c.type].gpiomask); signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; @@ -953,7 +952,6 @@ audio_mux(struct bttv *btv, int input, int mute) gpio_val = bttv_tvcards[btv->c.type].gpiomute; else gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; - aud_input.index = btv->audio; gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); if (bttv_gpio) @@ -962,15 +960,51 @@ audio_mux(struct bttv *btv, int input, int mute) return 0; ctrl.id = V4L2_CID_AUDIO_MUTE; - /* take automute into account, just btv->mute is not enough */ - ctrl.value = mute; + ctrl.value = btv->mute; bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl); c = btv->i2c_msp34xx_client; - if (c) - c->driver->command(c, VIDIOC_S_AUDIO, &aud_input); + if (c) { + struct v4l2_routing route; + + /* Note: the inputs tuner/radio/extern/intern are translated + to msp routings. This assumes common behavior for all msp3400 + based TV cards. When this assumption fails, then the + specific MSP routing must be added to the card table. + For now this is sufficient. */ + switch (input) { + case TVAUDIO_INPUT_RADIO: + route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_EXTERN: + route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_INTERN: + /* Yes, this is the same input as for RADIO. I doubt + if this is ever used. The only board with an INTERN + input is the BTTV_BOARD_AVERMEDIA98. I wonder how + that was tested. My guess is that the whole INTERN + input does not work. */ + route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_TUNER: + default: + route.input = MSP_INPUT_DEFAULT; + break; + } + route.output = MSP_OUTPUT_DEFAULT; + c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route); + } c = btv->i2c_tvaudio_client; - if (c) - c->driver->command(c, VIDIOC_S_AUDIO, &aud_input); + if (c) { + struct v4l2_routing route; + + route.input = input; + route.output = 0; + c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route); + } return 0; } diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 2d68a27417e..f62fd706b45 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -28,8 +28,9 @@ #include #include #include -#include +#include #include +#include #include #include "em28xx.h" @@ -146,11 +147,12 @@ struct em28xx_board em28xx_boards[] = { .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = 0, - .amux = 6, + .amux = MSP_INPUT_DEFAULT, },{ .type = EM28XX_VMUX_SVIDEO, .vmux = 2, - .amux = 1, + .amux = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART), }}, }, [EM2820_BOARD_MSI_VOX_USB_2] = { diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 780342f7b23..dfba33d0fa6 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -38,6 +38,7 @@ #include "em28xx.h" #include #include +#include #define DRIVER_AUTHOR "Ludovico Cavedon , " \ "Markus Rechberger , " \ @@ -216,9 +217,14 @@ static void video_mux(struct em28xx *dev, int index) em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput); if (dev->has_msp34xx) { + struct v4l2_routing route; + if (dev->i2s_speed) em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed); - em28xx_i2c_call_clients(dev, VIDIOC_S_AUDIO, &dev->ctl_ainput); + route.input = dev->ctl_ainput; + route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA); + /* Note: this is msp3400 specific */ + em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route); ainput = EM28XX_AUDIO_SRC_TUNER; em28xx_audio_source(dev, ainput); } else { diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 04250284ff1..8ba1c960388 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -555,7 +555,6 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct msp_state *state = i2c_get_clientdata(client); - int scart = -1; if (msp_debug >= 2) v4l_i2c_print_ioctl(client, cmd); @@ -660,15 +659,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } - /* msp34xx specific */ - case MSP_SET_MATRIX: - { - struct msp_matrix *mspm = arg; - - msp_set_scart(client, mspm->input - 1, mspm->output); - break; - } - /* --- v4l2 ioctls --- */ case VIDIOC_S_STD: { @@ -682,36 +672,38 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } - case VIDIOC_S_AUDIO: + case VIDIOC_INT_G_AUDIO_ROUTING: { - struct v4l2_audio *sarg = arg; + struct v4l2_routing *rt = arg; - switch (sarg->index) { - case TVAUDIO_INPUT_RADIO: - /* Hauppauge uses IN2 for the radio */ - state->mode = MSP_MODE_FM_RADIO; - scart = SCART_IN2; - break; - case TVAUDIO_INPUT_EXTERN: - /* IN1 is often used for external input ... */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN1; - break; - case TVAUDIO_INPUT_INTERN: - /* ... sometimes it is IN2 through ;) */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN2; - break; - case TVAUDIO_INPUT_TUNER: - state->mode = -1; - break; - } - if (scart >= 0) { - state->rxsubchans = V4L2_TUNER_SUB_STEREO; - msp_set_scart(client, scart, 0); + *rt = state->routing; + break; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + int tuner = (rt->input >> 3) & 1; + int old_tuner = (state->routing.input >> 3) & 1; + int sc_in = rt->input & 0x7; + int sc1_out = rt->output & 0xf; + int sc2_out = (rt->output >> 4) & 0xf; + u16 val; + + state->routing = *rt; + if (state->opmode == OPMODE_AUTOSELECT) { + val = msp_read_dem(client, 0x30) & ~0x100; + msp_write_dem(client, 0x30, val | (tuner ? 0x100 : 0)); + } else { + val = msp_read_dem(client, 0xbb) & ~0x100; + msp_write_dem(client, 0xbb, val | (tuner ? 0x100 : 0)); } + msp_set_scart(client, sc_in, 0); + msp_set_scart(client, sc1_out, 1); + msp_set_scart(client, sc2_out, 2); msp_set_audmode(client); - msp_wake_thread(client); + if (tuner != old_tuner) + msp_wake_thread(client); break; } @@ -941,6 +933,9 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind) state->muted = 0; state->i2s_mode = 0; init_waitqueue_head(&state->wq); + /* These are the reset input/output positions */ + state->routing.input = MSP_INPUT_DEFAULT; + state->routing.output = MSP_OUTPUT_DEFAULT; state->rev1 = msp_read_dsp(client, 0x1e); if (state->rev1 != -1) diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h index 04821ebfe04..1940748bb63 100644 --- a/drivers/media/video/msp3400-driver.h +++ b/drivers/media/video/msp3400-driver.h @@ -4,6 +4,8 @@ #ifndef MSP3400_DRIVER_H #define MSP3400_DRIVER_H +#include + /* ---------------------------------------------------------------------- */ /* This macro is allowed for *constants* only, gcc must calculate it @@ -72,7 +74,7 @@ struct msp_state { int i2s_mode; int main, second; /* sound carrier */ int input; - int source; /* see msp34xxg_set_source */ + struct v4l2_routing routing; /* v4l2 */ int audmode; diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index 9ee8dc216d7..1c794c3b9f2 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -187,13 +187,14 @@ void msp3400c_set_mode(struct i2c_client *client, int mode) { struct msp_state *state = i2c_get_clientdata(client); struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode]; + int tuner = (state->routing.input >> 3) & 1; int i; v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode); state->mode = mode; state->rxsubchans = V4L2_TUNER_SUB_MONO; - msp_write_dem(client, 0x00bb, data->ad_cv); + msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0)); for (i = 5; i >= 0; i--) /* fir 1 */ msp_write_dem(client, 0x0001, data->fir1[i]); @@ -783,34 +784,6 @@ int msp3410d_thread(void *data) * struct msp: only norm, acb and source are really used in this mode */ -/* set the same 'source' for the loudspeaker, scart and quasi-peak detector - * the value for source is the same as bit 15:8 of DSP registers 0x08, - * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B - */ -static void msp34xxg_set_source(struct i2c_client *client, int source) -{ - struct msp_state *state = i2c_get_clientdata(client); - - /* fix matrix mode to stereo and let the msp choose what - * to output according to 'source', as recommended - * for MONO (source==0) downmixing set bit[7:0] to 0x30 - */ - int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20); - - v4l_dbg(1, msp_debug, client, "set source to %d (0x%x)\n", source, value); - msp_set_source(client, value); - /* - * set identification threshold. Personally, I - * I set it to a higher value that the default - * of 0x190 to ignore noisy stereo signals. - * this needs tuning. (recommended range 0x00a0-0x03c0) - * 0x7f0 = forced mono mode - */ - /* a2 threshold for stereo/bilingual */ - msp_write_dem(client, 0x22, msp_stereo_thresh); - state->source = source; -} - static int msp34xxg_modus(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); @@ -843,10 +816,65 @@ static int msp34xxg_modus(struct i2c_client *client) return 0x0001; } +static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) + { + struct msp_state *state = i2c_get_clientdata(client); + int source, matrix; + + switch (state->audmode) { + case V4L2_TUNER_MODE_MONO: + source = 0; /* mono only */ + matrix = 0x30; + break; + case V4L2_TUNER_MODE_LANG1: + source = 3; /* stereo or A */ + matrix = 0x00; + break; + case V4L2_TUNER_MODE_LANG2: + source = 4; /* stereo or B */ + matrix = 0x10; + break; + case V4L2_TUNER_MODE_STEREO: + default: + source = 1; /* stereo or A|B */ + matrix = 0x20; + break; + } + + if (in == MSP_DSP_OUT_TUNER) + source = (source << 8) | 0x20; + /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14 + instead of 11, 12, 13. So we add one for that msp version. */ + else if (in >= MSP_DSP_OUT_MAIN_AVC && state->has_dolby_pro_logic) + source = ((in + 1) << 8) | matrix; + else + source = (in << 8) | matrix; + + v4l_dbg(1, msp_debug, client, "set source to %d (0x%x) for output %02x\n", + in, source, reg); + msp_write_dsp(client, reg, source); +} + +static void msp34xxg_set_sources(struct i2c_client *client) +{ + struct msp_state *state = i2c_get_clientdata(client); + u32 in = state->routing.input; + + msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf); + /* quasi-peak detector is set to same input as the loudspeaker (MAIN) */ + msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf); + msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf); + msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf); + if (state->has_scart23_in_scart2_out) + msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf); + msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf); +} + /* (re-)initialize the msp34xxg */ static void msp34xxg_reset(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); + int tuner = (state->routing.input >> 3) & 1; int modus; /* initialize std to 1 (autodetect) to signal that no standard is @@ -864,11 +892,12 @@ static void msp34xxg_reset(struct i2c_client *client) /* step-by-step initialisation, as described in the manual */ modus = msp34xxg_modus(client); + modus |= tuner ? 0x100 : 0; msp_write_dem(client, 0x30, modus); /* write the dsps that may have an influence on standard/audio autodetection right now */ - msp34xxg_set_source(client, state->source); + msp34xxg_set_sources(client); msp_write_dsp(client, 0x0d, 0x1900); /* scart */ msp_write_dsp(client, 0x0e, 0x3000); /* FM */ @@ -896,7 +925,6 @@ int msp34xxg_thread(void *data) v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n"); - state->source = 1; /* default */ for (;;) { v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n"); msp_sleep(state, -1); @@ -993,7 +1021,6 @@ static int msp34xxg_detect_stereo(struct i2c_client *client) static void msp34xxg_set_audmode(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - int source; if (state->std == 0x20) { if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) && @@ -1005,25 +1032,7 @@ static void msp34xxg_set_audmode(struct i2c_client *client) } } - switch (state->audmode) { - case V4L2_TUNER_MODE_MONO: - source = 0; /* mono only */ - break; - case V4L2_TUNER_MODE_STEREO: - source = 1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */ - /* problem: that could also mean 2 (scart input) */ - break; - case V4L2_TUNER_MODE_LANG1: - source = 3; /* stereo or A */ - break; - case V4L2_TUNER_MODE_LANG2: - source = 4; /* stereo or B */ - break; - default: - source = 1; - break; - } - msp34xxg_set_source(client, source); + msp34xxg_set_sources(client); } void msp_set_audmode(struct i2c_client *client) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 15fd55ff69c..4e6d030d83c 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1682,6 +1682,30 @@ static int chip_command(struct i2c_client *client, case VIDIOC_S_CTRL: return tvaudio_set_ctrl(chip, arg); + case VIDIOC_INT_G_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + + rt->input = chip->input; + rt->output = 0; + break; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + + if (!(desc->flags & CHIP_HAS_INPUTSEL) || rt->input >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = rt->input; + if (chip->muted) + break; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + break; + } + case VIDIOC_S_AUDIO: { struct v4l2_audio *sarg = arg; diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index d1234d781e1..6824ee045fe 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -312,7 +312,6 @@ static const char *v4l2_int_ioctls[] = { [_IOC_NR(DECODER_DUMP)] = "DECODER_DUMP", #endif [_IOC_NR(AUDC_SET_RADIO)] = "AUDC_SET_RADIO", - [_IOC_NR(MSP_SET_MATRIX)] = "MSP_SET_MATRIX", [_IOC_NR(TUNER_SET_TYPE_ADDR)] = "TUNER_SET_TYPE_ADDR", [_IOC_NR(TUNER_SET_STANDBY)] = "TUNER_SET_STANDBY", @@ -431,12 +430,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) printk ("%s: value=%d\n", s, *p); break; } - case MSP_SET_MATRIX: - { - struct msp_matrix *p=arg; - printk ("%s: input=%d, output=%d\n", s, p->input, p->output); - break; - } case VIDIOC_G_AUDIO: case VIDIOC_S_AUDIO: case VIDIOC_ENUMAUDIO: @@ -465,7 +458,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) struct v4l2_buffer *p=arg; struct v4l2_timecode *tc=&p->timecode; printk ("%s: %02ld:%02d:%02d.%08ld index=%d, type=%s, " - "bytesused=%d, flags=0x%08d, " + "bytesused=%d, flags=0x%08x, " "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx\n", s, (p->timestamp.tv_sec/3600), @@ -479,7 +472,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) prt_names(p->memory,v4l2_memory_names), p->m.userptr); printk ("%s: timecode= %02d:%02d:%02d type=%d, " - "flags=0x%08d, frames=%d, userbits=0x%p", + "flags=0x%08x, frames=%d, userbits=0x%08p\n", s,tc->hours,tc->minutes,tc->seconds, tc->type, tc->flags, tc->frames, tc->userbits); break; @@ -665,7 +658,7 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) case VIDIOC_INT_G_VIDEO_ROUTING: { struct v4l2_routing *p=arg; - printk ("%s: input=%d, output=%d\n", s, p->input, p->output); + printk ("%s: input=0x%x, output=0x%x\n", s, p->input, p->output); break; } case VIDIOC_G_SLICED_VBI_CAP: diff --git a/include/media/msp3400.h b/include/media/msp3400.h index 26e26585273..0be61a021d4 100644 --- a/include/media/msp3400.h +++ b/include/media/msp3400.h @@ -145,9 +145,14 @@ MSP_DSP_TO_SCART1(sc_i2s_src) | \ MSP_DSP_TO_SCART2(sc_i2s_src) | \ MSP_DSP_TO_I2S(sc_i2s_src)) +#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, \ + MSP_DSP_OUT_TUNER, MSP_DSP_OUT_TUNER) #define MSP_OUTPUT(sc) \ (MSP_OUT_TO_SCART1(sc) | \ MSP_OUT_TO_SCART2(sc)) +/* This equals the RESET position of the msp3400 ACB register */ +#define MSP_OUTPUT_DEFAULT (MSP_OUT_TO_SCART1(MSP_OUT_SCART3) | \ + MSP_OUT_TO_SCART2(MSP_OUT_SCART1_DA)) /* Tuner inputs vs. msp version */ /* Chip TUNER_1 TUNER_2 diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 07130474a0d..642520acdfa 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -123,14 +123,6 @@ enum v4l2_chip_ident { /* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */ #define AUDC_SET_RADIO _IO('d',88) -/* msp3400 ioctl: will be removed in the near future, to be replaced by - VIDIOC_INT_S_AUDIO_ROUTING. */ -struct msp_matrix { - int input; - int output; -}; -#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix) - /* tuner ioctls */ /* Sets tuner type and its I2C addr */ -- cgit v1.2.3-70-g09d2