From 260e689ba237fb513b49e98841d98e93ea639c75 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 18 Jul 2010 20:54:52 -0300 Subject: V4L/DVB: v4l2_subdev: Move interrupt_service_routine ptr to v4l2_subdev_core_ops The CX2584x and related cores are multifunction subdevices with a number of internal blocks that act as interrupt sources. Move the v4L2_subdev interrupt_service_routine callback from v4l_subdev_ir_ops to v4l2_subdev_core_ops, as the video and audio blocks of a CX2584x and related cores can generate interrupts along with the IR block. This change also makes sense for other subdev's that generate interrupts and do not have an IR block. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-subdev.h | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'include/media') diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index a780cca185f..bacd52568ef 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -131,6 +131,11 @@ struct v4l2_subdev_io_pin_config { s_power: puts subdevice in power saving mode (on == 0) or normal operation mode (on == 1). + + interrupt_service_routine: Called by the bridge chip's interrupt service + handler, when an interrupt status has be raised due to this subdev, + so that this subdev can handle the details. It may schedule work to be + performed later. It must not sleep. *Called from an IRQ context*. */ struct v4l2_subdev_core_ops { int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); @@ -156,6 +161,8 @@ struct v4l2_subdev_core_ops { int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); #endif int (*s_power)(struct v4l2_subdev *sd, int on); + int (*interrupt_service_routine)(struct v4l2_subdev *sd, + u32 status, bool *handled); }; /* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio. @@ -330,11 +337,6 @@ struct v4l2_subdev_sensor_ops { }; /* - interrupt_service_routine: Called by the bridge chip's interrupt service - handler, when an IR interrupt status has be raised due to this subdev, - so that this subdev can handle the details. It may schedule work to be - performed later. It must not sleep. *Called from an IRQ context*. - [rt]x_g_parameters: Get the current operating parameters and state of the the IR receiver or transmitter. @@ -392,10 +394,6 @@ struct v4l2_subdev_ir_parameters { }; struct v4l2_subdev_ir_ops { - /* Common to receiver and transmitter */ - int (*interrupt_service_routine)(struct v4l2_subdev *sd, - u32 status, bool *handled); - /* Receiver */ int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count, ssize_t *num); -- cgit v1.2.3-70-g09d2