From 8ec6552f4a77d15f446b00aed364e3c12d38aa6c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 1 Sep 2011 21:18:20 -0700 Subject: [SCSI] libsas: sgpio write support Add SFF-8485 v0.7 / SAS-1 smp-write-gpio register support to libsas. Defer SAS-2 support unless/until it defines an sgpio interface. Minimum implementation needed to get the lights blinking. try_test_sas_gpio_gp_bit() provides a common method to parse the incoming write data (raw bitstream), and the to_sas_gpio_gp_bit() helper routine can be used as a basis for the set/clear operations for the 'read' implementation. Host implementations parse as many bits (ODx.[012]) as are locally supported and report the number of registers successfully written. If the submitted data overruns the internal number of registers available report the write as a success with the number of bytes remaining reported in ->resid_len. Example (assuming an active backplane) set the "identify" pattern for the first 21 devices: smp_write_gpio --count=2 --data=92,49,24,92,24,92,49,24 -t 4 --index=1 /dev/bsg/sas_hostX Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- include/scsi/libsas.h | 11 +++++++++++ include/scsi/sas.h | 8 ++++++++ 2 files changed, 19 insertions(+) (limited to 'include/scsi') diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 2517254b840..af0a1deac93 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -405,6 +405,13 @@ static inline void sas_phy_disconnected(struct asd_sas_phy *phy) phy->linkrate = SAS_LINK_RATE_UNKNOWN; } +static inline unsigned int to_sas_gpio_od(int device, int bit) +{ + return 3 * device + bit; +} + +int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count); + /* ---------- Tasks ---------- */ /* service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED | @@ -592,6 +599,10 @@ struct sas_domain_function_template { /* Phy management */ int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *); + + /* GPIO support */ + int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type, + u8 reg_index, u8 reg_count, u8 *write_data); }; extern int sas_register_ha(struct sas_ha_struct *); diff --git a/include/scsi/sas.h b/include/scsi/sas.h index e9fd0228138..a3001add0c6 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -195,6 +195,14 @@ enum sas_open_rej_reason { SAS_OREJ_RSVD_RETRY = 18, }; +enum sas_gpio_reg_type { + SAS_GPIO_REG_CFG = 0, + SAS_GPIO_REG_RX = 1, + SAS_GPIO_REG_RX_GP = 2, + SAS_GPIO_REG_TX = 3, + SAS_GPIO_REG_TX_GP = 4, +}; + struct dev_to_host_fis { u8 fis_type; /* 0x34 */ u8 flags; -- cgit v1.2.3-70-g09d2