From 1d2c90425d5b0dcbf4a0fab2053d5087758b76a0 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 6 Nov 2006 21:52:16 -0500 Subject: [PATCH] pcmcia: multifunction card handling fixes s->functions needs to be initialized earlier, for the "let's see how high it increases" approach means that pcmcia_request_irq() (which makes use of this value) is confused, and might request an exclusive IRQ first even though it is not supposed to. Also, a CIS override autoloaded using the firmware loader may allow for the use of more or less functions in a multifunction card. Therefore, we may need to schedule a call to add this second function later on, or simply remove the other function (it's always the first -valid- function which reaches this codepath). Many thanks to Fabrice Bellet for debugging and testing patches. Signed-off-by: Dominik Brodowski --- include/pcmcia/ss.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index ede639812f8..623a0fc0dae 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -262,9 +262,10 @@ struct pcmcia_socket { u8 present:1, /* PCMCIA card is present in socket */ busy:1, /* "master" ioctl is used */ dead:1, /* pcmcia module is being unloaded */ - device_add_pending:1, /* a pseudo-multifunction-device + device_add_pending:1, /* a multifunction-device * add event is pending */ - reserved:4; + mfc_pfc:1, /* the pending event adds a mfc (1) or pfc (0) */ + reserved:3; } pcmcia_state; struct work_struct device_add; /* for adding further pseudo-multifunction -- cgit v1.2.3-70-g09d2