From ee1e0994ab1bd302fd03432de79c07751df47ffa Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 24 Jan 2014 14:37:57 +0100 Subject: regulator: s5m8767: Use GPIO for controlling Buck9/eMMC Add support for GPIO control (enable/disable) over Buck9. The Buck9 Converter is used as a supply for eMMC Host Controller. BUCK9EN GPIO of S5M8767 chip may be used by application processor to enable or disable the Buck9. This has two benefits: - It is faster than toggling it over I2C bus. - It allows disabling the regulator during suspend to RAM; The AP will enable it during resume; Without the patch the regulator supplying eMMC must be defined as fixed-regulator. Signed-off-by: Krzysztof Kozlowski Acked-by: Lee Jones Signed-off-by: Mark Brown --- include/linux/mfd/samsung/core.h | 3 ++- include/linux/mfd/samsung/s5m8767.h | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 41c9bde410c..55510444b9f 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -119,7 +119,8 @@ struct sec_platform_data { struct sec_regulator_data { int id; struct regulator_init_data *initdata; - struct device_node *reg_node; + struct device_node *reg_node; + int ext_control_gpio; }; /* diff --git a/include/linux/mfd/samsung/s5m8767.h b/include/linux/mfd/samsung/s5m8767.h index 2ab0b0f0364..243b58fec33 100644 --- a/include/linux/mfd/samsung/s5m8767.h +++ b/include/linux/mfd/samsung/s5m8767.h @@ -183,9 +183,16 @@ enum s5m8767_regulators { S5M8767_REG_MAX, }; +/* LDO_EN/BUCK_EN field in registers */ #define S5M8767_ENCTRL_SHIFT 6 #define S5M8767_ENCTRL_MASK (0x3 << S5M8767_ENCTRL_SHIFT) +/* + * LDO_EN/BUCK_EN register value for controlling this Buck or LDO + * by GPIO (PWREN, BUCKEN). + */ +#define S5M8767_ENCTRL_USE_GPIO 0x1 + /* * Values for BUCK_RAMP field in DVS_RAMP register, matching raw values * in mV/us. -- cgit v1.2.3-70-g09d2 From e31108cad3deabb1a63111d7aa699ca67753c01f Mon Sep 17 00:00:00 2001 From: Manish Badarkhe Date: Wed, 29 Jan 2014 20:27:27 +0530 Subject: devres: introduce API "devm_kstrdup" This patch introduces "devm_kstrdup" API so that the device's driver can allocate memory and copy string. Signed-off-by: Manish Badarkhe Signed-off-by: Mark Brown --- drivers/base/devres.c | 26 ++++++++++++++++++++++++++ include/linux/device.h | 1 + 2 files changed, 27 insertions(+) (limited to 'include') diff --git a/drivers/base/devres.c b/drivers/base/devres.c index 545c4de412c..db4e264eecb 100644 --- a/drivers/base/devres.c +++ b/drivers/base/devres.c @@ -790,6 +790,32 @@ void * devm_kmalloc(struct device *dev, size_t size, gfp_t gfp) } EXPORT_SYMBOL_GPL(devm_kmalloc); +/** + * devm_kstrdup - Allocate resource managed space and + * copy an existing string into that. + * @dev: Device to allocate memory for + * @s: the string to duplicate + * @gfp: the GFP mask used in the devm_kmalloc() call when + * allocating memory + * RETURNS: + * Pointer to allocated string on success, NULL on failure. + */ +char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp) +{ + size_t size; + char *buf; + + if (!s) + return NULL; + + size = strlen(s) + 1; + buf = devm_kmalloc(dev, size, gfp); + if (buf) + memcpy(buf, s, size); + return buf; +} +EXPORT_SYMBOL_GPL(devm_kstrdup); + /** * devm_kfree - Resource-managed kfree * @dev: Device this memory belongs to diff --git a/include/linux/device.h b/include/linux/device.h index 952b01033c3..ec1b6e21f0e 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -626,6 +626,7 @@ static inline void *devm_kcalloc(struct device *dev, return devm_kmalloc_array(dev, n, size, flags | __GFP_ZERO); } extern void devm_kfree(struct device *dev, void *p); +extern char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp); void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res); void __iomem *devm_request_and_ioremap(struct device *dev, -- cgit v1.2.3-70-g09d2 From ad54a0cfbeb4bd4033d09017557ccbc423f9d5ff Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 12 Feb 2014 01:00:34 +0100 Subject: of: add functions to count number of elements in a property The need to know the number of array elements in a property is a common pattern. To prevent duplication of open-coded implementations add a helper static function that also centralises strict sanity checking and DTB format details, as well as a set of wrapper functions for u8, u16, u32 and u64. Suggested-by: Mark Rutland Signed-off-by: Heiko Stuebner Acked-by: Rob Herring Acked-by: Grant Likely Acked-by: Mark Rutland Signed-off-by: Mark Brown --- drivers/of/base.c | 32 +++++++++++++++++++++++ include/linux/of.h | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 108 insertions(+) (limited to 'include') diff --git a/drivers/of/base.c b/drivers/of/base.c index ff85450d568..8a2a55c65e5 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -885,6 +885,38 @@ struct device_node *of_find_node_by_phandle(phandle handle) } EXPORT_SYMBOL(of_find_node_by_phandle); +/** + * of_property_count_elems_of_size - Count the number of elements in a property + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @elem_size: size of the individual element + * + * Search for a property in a device node and count the number of elements of + * size elem_size in it. Returns number of elements on sucess, -EINVAL if the + * property does not exist or its length does not match a multiple of elem_size + * and -ENODATA if the property does not have a value. + */ +int of_property_count_elems_of_size(const struct device_node *np, + const char *propname, int elem_size) +{ + struct property *prop = of_find_property(np, propname, NULL); + + if (!prop) + return -EINVAL; + if (!prop->value) + return -ENODATA; + + if (prop->length % elem_size != 0) { + pr_err("size of %s in node %s is not a multiple of %d\n", + propname, np->full_name, elem_size); + return -EINVAL; + } + + return prop->length / elem_size; +} +EXPORT_SYMBOL_GPL(of_property_count_elems_of_size); + /** * of_find_property_value_of_size * diff --git a/include/linux/of.h b/include/linux/of.h index 70c64ba17fa..b59f2e41c7c 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -250,6 +250,8 @@ extern struct device_node *of_find_node_with_property( extern struct property *of_find_property(const struct device_node *np, const char *name, int *lenp); +extern int of_property_count_elems_of_size(const struct device_node *np, + const char *propname, int elem_size); extern int of_property_read_u32_index(const struct device_node *np, const char *propname, u32 index, u32 *out_value); @@ -431,6 +433,12 @@ static inline struct device_node *of_find_compatible_node( return NULL; } +static inline int of_property_count_elems_of_size(const struct device_node *np, + const char *propname, int elem_size) +{ + return -ENOSYS; +} + static inline int of_property_read_u32_index(const struct device_node *np, const char *propname, u32 index, u32 *out_value) { @@ -569,6 +577,74 @@ extern int of_node_to_nid(struct device_node *np); static inline int of_node_to_nid(struct device_node *device) { return 0; } #endif +/** + * of_property_count_u8_elems - Count the number of u8 elements in a property + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node and count the number of u8 elements + * in it. Returns number of elements on sucess, -EINVAL if the property does + * not exist or its length does not match a multiple of u8 and -ENODATA if the + * property does not have a value. + */ +static inline int of_property_count_u8_elems(const struct device_node *np, + const char *propname) +{ + return of_property_count_elems_of_size(np, propname, sizeof(u8)); +} + +/** + * of_property_count_u16_elems - Count the number of u16 elements in a property + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node and count the number of u16 elements + * in it. Returns number of elements on sucess, -EINVAL if the property does + * not exist or its length does not match a multiple of u16 and -ENODATA if the + * property does not have a value. + */ +static inline int of_property_count_u16_elems(const struct device_node *np, + const char *propname) +{ + return of_property_count_elems_of_size(np, propname, sizeof(u16)); +} + +/** + * of_property_count_u32_elems - Count the number of u32 elements in a property + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node and count the number of u32 elements + * in it. Returns number of elements on sucess, -EINVAL if the property does + * not exist or its length does not match a multiple of u32 and -ENODATA if the + * property does not have a value. + */ +static inline int of_property_count_u32_elems(const struct device_node *np, + const char *propname) +{ + return of_property_count_elems_of_size(np, propname, sizeof(u32)); +} + +/** + * of_property_count_u64_elems - Count the number of u64 elements in a property + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device node and count the number of u64 elements + * in it. Returns number of elements on sucess, -EINVAL if the property does + * not exist or its length does not match a multiple of u64 and -ENODATA if the + * property does not have a value. + */ +static inline int of_property_count_u64_elems(const struct device_node *np, + const char *propname) +{ + return of_property_count_elems_of_size(np, propname, sizeof(u64)); +} + /** * of_property_read_bool - Findfrom a property * @np: device node from which the property value is to be read. -- cgit v1.2.3-70-g09d2 From f2518480c7b744296a5587990a54e3a284d932b8 Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Tue, 4 Mar 2014 17:40:36 +0800 Subject: regulator: pfuze100: add pfuze200 support support pfuze200 chip which remove SW1C and SW4 based on pfuze100. Signed-off-by: Robin Gong Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/pfuze100.txt | 96 +++++++++- drivers/regulator/pfuze100-regulator.c | 196 +++++++++++++++------ include/linux/regulator/pfuze100.h | 14 ++ 3 files changed, 251 insertions(+), 55 deletions(-) (limited to 'include') diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index fc989b2e805..34ef5d16d0f 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -1,7 +1,7 @@ PFUZE100 family of regulators Required properties: -- compatible: "fsl,pfuze100" +- compatible: "fsl,pfuze100" or "fsl,pfuze200" - reg: I2C slave address Required child node: @@ -10,11 +10,14 @@ Required child node: Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are: + --PFUZE100 sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE200 + sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6 Each regulator is defined using the standard binding for regulators. -Example: +Example 1: PFUZE100 pmic: pfuze100@08 { compatible = "fsl,pfuze100"; @@ -113,3 +116,92 @@ Example: }; }; }; + + +Example 2: PFUZE200 + + pmic: pfuze200@08 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 371a55374ed..ef330e69336 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -56,6 +56,8 @@ #define PFUZE100_VGEN5VOL 0x70 #define PFUZE100_VGEN6VOL 0x71 +enum chips {PFUZE100, PFUZE200, PFUZE_NUM}; + struct pfuze_regulator { struct regulator_desc desc; unsigned char stby_reg; @@ -63,6 +65,7 @@ struct pfuze_regulator { }; struct pfuze_chip { + int chip_id; struct regmap *regmap; struct device *dev; struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; @@ -77,15 +80,15 @@ static const int pfuze100_vsnvs[] = { 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, }; -static const struct i2c_device_id pfuze_device_id[] = { - {.name = "pfuze100"}, - {}, +static const struct i2c_device_id pfuze_device_id[PFUZE_NUM] = { + {.name = "pfuze100", .driver_data = PFUZE100}, + {.name = "pfuze200", .driver_data = PFUZE200}, }; MODULE_DEVICE_TABLE(i2c, pfuze_device_id); -static const struct of_device_id pfuze_dt_ids[] = { - { .compatible = "fsl,pfuze100" }, - {}, +static const struct of_device_id pfuze_dt_ids[PFUZE_NUM] = { + { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, + { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, }; MODULE_DEVICE_TABLE(of, pfuze_dt_ids); @@ -139,14 +142,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { }; -#define PFUZE100_FIXED_REG(_name, base, voltage) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name, \ .n_voltages = 1, \ .ops = &pfuze100_fixed_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .min_uV = (voltage), \ .enable_reg = (base), \ @@ -154,14 +157,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { }, \ } -#define PFUZE100_SW_REG(_name, base, min, max, step) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_SW_REG(_chip, _name, base, min, max, step) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name,\ .n_voltages = ((max) - (min)) / (step) + 1, \ .ops = &pfuze100_sw_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .min_uV = (min), \ .uV_step = (step), \ @@ -172,14 +175,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x3f, \ } -#define PFUZE100_SWB_REG(_name, base, mask, voltages) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_SWB_REG(_chip, _name, base, mask, voltages) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name, \ .n_voltages = ARRAY_SIZE(voltages), \ .ops = &pfuze100_swb_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .volt_table = voltages, \ .vsel_reg = (base), \ @@ -187,14 +190,14 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { }, \ } -#define PFUZE100_VGEN_REG(_name, base, min, max, step) \ - [PFUZE100_ ## _name] = { \ +#define PFUZE100_VGEN_REG(_chip, _name, base, min, max, step) \ + [_chip ## _ ## _name] = { \ .desc = { \ .name = #_name, \ .n_voltages = ((max) - (min)) / (step) + 1, \ .ops = &pfuze100_ldo_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ - .id = PFUZE100_ ## _name, \ + .id = _chip ## _ ## _name, \ .owner = THIS_MODULE, \ .min_uV = (min), \ .uV_step = (step), \ @@ -207,25 +210,45 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } +/* PFUZE100 */ static struct pfuze_regulator pfuze100_regulators[] = { - PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), - PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), - PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), - PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), - PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), - PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), - PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), - PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), - PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000), - PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), - PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), - PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), - PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), - PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), - PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), + PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), + PFUZE100_SW_REG(PFUZE100, SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000), + PFUZE100_SW_REG(PFUZE100, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE100, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE100, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE100, SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000), + PFUZE100_SWB_REG(PFUZE100, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE100, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE100, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE100, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE100, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE100, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE100, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE100, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE100, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), +}; + +static struct pfuze_regulator pfuze200_regulators[] = { + PFUZE100_SW_REG(PFUZE200, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), + PFUZE100_SW_REG(PFUZE200, SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE200, SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000), + PFUZE100_SW_REG(PFUZE200, SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000), + PFUZE100_SWB_REG(PFUZE200, SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE200, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE200, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE200, VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE200, VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE100_VGEN_REG(PFUZE200, VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE200, VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE200, VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; +static struct pfuze_regulator *pfuze_regulators; + #ifdef CONFIG_OF +/* PFUZE100 */ static struct of_regulator_match pfuze100_matches[] = { { .name = "sw1ab", }, { .name = "sw1c", }, @@ -244,6 +267,26 @@ static struct of_regulator_match pfuze100_matches[] = { { .name = "vgen6", }, }; +/* PFUZE200 */ +static struct of_regulator_match pfuze200_matches[] = { + + { .name = "sw1ab", }, + { .name = "sw2", }, + { .name = "sw3a", }, + { .name = "sw3b", }, + { .name = "swbst", }, + { .name = "vsnvs", }, + { .name = "vrefddr", }, + { .name = "vgen1", }, + { .name = "vgen2", }, + { .name = "vgen3", }, + { .name = "vgen4", }, + { .name = "vgen5", }, + { .name = "vgen6", }, +}; + +static struct of_regulator_match *pfuze_matches; + static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) { struct device *dev = chip->dev; @@ -260,8 +303,20 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) return -EINVAL; } - ret = of_regulator_match(dev, parent, pfuze100_matches, - ARRAY_SIZE(pfuze100_matches)); + switch (chip->chip_id) { + case PFUZE200: + pfuze_matches = pfuze200_matches; + ret = of_regulator_match(dev, parent, pfuze200_matches, + ARRAY_SIZE(pfuze200_matches)); + break; + + case PFUZE100: + default: + pfuze_matches = pfuze100_matches; + ret = of_regulator_match(dev, parent, pfuze100_matches, + ARRAY_SIZE(pfuze100_matches)); + break; + } of_node_put(parent); if (ret < 0) { @@ -275,12 +330,12 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) static inline struct regulator_init_data *match_init_data(int index) { - return pfuze100_matches[index].init_data; + return pfuze_matches[index].init_data; } static inline struct device_node *match_of_node(int index) { - return pfuze100_matches[index].of_node; + return pfuze_matches[index].of_node; } #else static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) @@ -308,16 +363,14 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) if (ret) return ret; - switch (value & 0x0f) { - /* - * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 - * as ID=8 - */ - case 0x8: + if (((value & 0x0f) == 0x8) && (pfuze_chip->chip_id == PFUZE100)) { + /* + * Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 + * as ID=8 in PFUZE100 + */ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); - case 0x0: - break; - default: + } else if ((value & 0x0f) != pfuze_chip->chip_id) { + /* device id NOT match with your setting */ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); return -ENODEV; } @@ -353,17 +406,31 @@ static int pfuze100_regulator_probe(struct i2c_client *client, dev_get_platdata(&client->dev); struct regulator_config config = { }; int i, ret; + const struct of_device_id *match; + u32 regulator_num; + u32 sw_check_start, sw_check_end; pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), GFP_KERNEL); if (!pfuze_chip) return -ENOMEM; - i2c_set_clientdata(client, pfuze_chip); - - memcpy(pfuze_chip->regulator_descs, pfuze100_regulators, - sizeof(pfuze_chip->regulator_descs)); + if (client->dev.of_node) { + match = of_match_device(of_match_ptr(pfuze_dt_ids), + &client->dev); + if (!match) { + dev_err(&client->dev, "Error: No device match found\n"); + return -ENODEV; + } + pfuze_chip->chip_id = (int)(long)match->data; + } else if (id) { + pfuze_chip->chip_id = id->driver_data; + } else { + dev_err(&client->dev, "No dts match or id table match found\n"); + return -ENODEV; + } + i2c_set_clientdata(client, pfuze_chip); pfuze_chip->dev = &client->dev; pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config); @@ -380,11 +447,34 @@ static int pfuze100_regulator_probe(struct i2c_client *client, return ret; } + /* use the right regulators after identify the right device */ + switch (pfuze_chip->chip_id) { + case PFUZE200: + pfuze_regulators = pfuze200_regulators; + regulator_num = ARRAY_SIZE(pfuze200_regulators); + sw_check_start = PFUZE200_SW2; + sw_check_end = PFUZE200_SW3B; + break; + + case PFUZE100: + default: + pfuze_regulators = pfuze100_regulators; + regulator_num = ARRAY_SIZE(pfuze100_regulators); + sw_check_start = PFUZE100_SW2; + sw_check_end = PFUZE100_SW4; + break; + } + dev_info(&client->dev, "pfuze%s found.\n", + (pfuze_chip->chip_id == PFUZE100) ? "100" : "200"); + + memcpy(pfuze_chip->regulator_descs, pfuze_regulators, + sizeof(pfuze_chip->regulator_descs)); + ret = pfuze_parse_regulators_dt(pfuze_chip); if (ret) return ret; - for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) { + for (i = 0; i < regulator_num; i++) { struct regulator_init_data *init_data; struct regulator_desc *desc; int val; @@ -397,7 +487,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, init_data = match_init_data(i); /* SW2~SW4 high bit check and modify the voltage value table */ - if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) { + if (i >= sw_check_start && i <= sw_check_end) { regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); if (val & 0x40) { desc->min_uV = 800000; @@ -415,7 +505,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, devm_regulator_register(&client->dev, desc, &config); if (IS_ERR(pfuze_chip->regulators[i])) { dev_err(&client->dev, "register regulator%s failed\n", - pfuze100_regulators[i].desc.name); + pfuze_regulators[i].desc.name); return PTR_ERR(pfuze_chip->regulators[i]); } } diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index 65d550bf395..364f7a7c43d 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -35,6 +35,20 @@ #define PFUZE100_VGEN6 14 #define PFUZE100_MAX_REGULATOR 15 +#define PFUZE200_SW1AB 0 +#define PFUZE200_SW2 1 +#define PFUZE200_SW3A 2 +#define PFUZE200_SW3B 3 +#define PFUZE200_SWBST 4 +#define PFUZE200_VSNVS 5 +#define PFUZE200_VREFDDR 6 +#define PFUZE200_VGEN1 7 +#define PFUZE200_VGEN2 8 +#define PFUZE200_VGEN3 9 +#define PFUZE200_VGEN4 10 +#define PFUZE200_VGEN5 11 +#define PFUZE200_VGEN6 12 + struct regulator_init_data; struct pfuze_regulator_platform_data { -- cgit v1.2.3-70-g09d2 From ca5d1b3524b4d90a2e2f1f71583c1dca6b96fd92 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Wed, 5 Mar 2014 22:11:29 +0100 Subject: regulator: helpers: Modify helpers enabling multi-bit control This patch extends the regulator helpers to account for device that use multiple bits for control when using regmap enable/disable/bypass ops. The actual regulator helpers wrongly assume that the regulator control is always performed using single bits, using in the regulator_desc struct only two parameters *_reg and *_mask defining register and mask for control. This patch extends this struct and introduces the helpers to take into account devices where control is performed using multiple bits and specific multi-bit values are used for enabling/disabling/bypassing the regulator. Signed-off-by: Carlo Caione Signed-off-by: Mark Brown --- drivers/regulator/helpers.c | 48 ++++++++++++++++++++++++++-------------- include/linux/regulator/driver.h | 8 +++++++ 2 files changed, 40 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index e221a271ba5..cbc39096c78 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -37,10 +37,17 @@ int regulator_is_enabled_regmap(struct regulator_dev *rdev) if (ret != 0) return ret; - if (rdev->desc->enable_is_inverted) - return (val & rdev->desc->enable_mask) == 0; - else - return (val & rdev->desc->enable_mask) != 0; + val &= rdev->desc->enable_mask; + + if (rdev->desc->enable_is_inverted) { + if (rdev->desc->enable_val) + return val != rdev->desc->enable_val; + return val == 0; + } else { + if (rdev->desc->enable_val) + return val == rdev->desc->enable_val; + return val != 0; + } } EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap); @@ -57,10 +64,13 @@ int regulator_enable_regmap(struct regulator_dev *rdev) { unsigned int val; - if (rdev->desc->enable_is_inverted) - val = 0; - else - val = rdev->desc->enable_mask; + if (rdev->desc->enable_is_inverted) { + val = rdev->desc->disable_val; + } else { + val = rdev->desc->enable_val; + if (!val) + val = rdev->desc->enable_mask; + } return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val); @@ -80,10 +90,13 @@ int regulator_disable_regmap(struct regulator_dev *rdev) { unsigned int val; - if (rdev->desc->enable_is_inverted) - val = rdev->desc->enable_mask; - else - val = 0; + if (rdev->desc->enable_is_inverted) { + val = rdev->desc->enable_val; + if (!val) + val = rdev->desc->enable_mask; + } else { + val = rdev->desc->disable_val; + } return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val); @@ -419,10 +432,13 @@ int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) { unsigned int val; - if (enable) - val = rdev->desc->bypass_mask; - else - val = 0; + if (enable) { + val = rdev->desc->bypass_val_on; + if (!val) + val = rdev->desc->bypass_mask; + } else { + val = rdev->desc->bypass_val_off; + } return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, rdev->desc->bypass_mask, val); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9370e65348a..bbe03a1924c 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -228,10 +228,14 @@ enum regulator_type { * output when using regulator_set_voltage_sel_regmap * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops + * @enable_val: Enabling value for control when using regmap enable/disable ops + * @disable_val: Disabling value for control when using regmap enable/disable ops * @enable_is_inverted: A flag to indicate set enable_mask bits to disable * when using regulator_enable_regmap and friends APIs. * @bypass_reg: Register for control when using regmap set_bypass * @bypass_mask: Mask for control when using regmap set_bypass + * @bypass_val_on: Enabling value for control when using regmap set_bypass + * @bypass_val_off: Disabling value for control when using regmap set_bypass * * @enable_time: Time taken for initial enable of regulator (in uS). */ @@ -263,9 +267,13 @@ struct regulator_desc { unsigned int apply_bit; unsigned int enable_reg; unsigned int enable_mask; + unsigned int enable_val; + unsigned int disable_val; bool enable_is_inverted; unsigned int bypass_reg; unsigned int bypass_mask; + unsigned int bypass_val_on; + unsigned int bypass_val_off; unsigned int enable_time; }; -- cgit v1.2.3-70-g09d2 From b07e2b70b9a1ff9f59af66fd0085c1c52178f440 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 28 Feb 2014 11:41:41 +0100 Subject: mfd: sec-core: Add maximum RTC register for regmap config Add maximum register to the regmap used by rtc-s5m driver. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 2 ++ include/linux/mfd/samsung/rtc.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 714e2135210..306b3a282c2 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -141,6 +141,8 @@ static const struct regmap_config s5m8767_regmap_config = { static const struct regmap_config sec_rtc_regmap_config = { .reg_bits = 8, .val_bits = 8, + + .max_register = SEC_RTC_REG_MAX, }; #ifdef CONFIG_OF diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h index 94b7cd6d889..4627f59ebd8 100644 --- a/include/linux/mfd/samsung/rtc.h +++ b/include/linux/mfd/samsung/rtc.h @@ -43,6 +43,8 @@ enum sec_rtc_reg { SEC_RTC_STATUS, SEC_WTSR_SMPL_CNTL, SEC_RTC_UDR_CON, + + SEC_RTC_REG_MAX, }; #define RTC_I2C_ADDR (0x0C >> 1) -- cgit v1.2.3-70-g09d2 From 677620952a0fd1b1618bed57c1ebd94bf3c710f3 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 28 Feb 2014 11:41:43 +0100 Subject: mfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexes The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding interrupts are named similarly). Use consistent names for interrupts to limit possible errors. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- drivers/mfd/sec-irq.c | 8 ++++---- include/linux/mfd/samsung/irq.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index 4de494f51d4..e403c293b43 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -59,13 +59,13 @@ static const struct regmap_irq s2mps11_irqs[] = { .reg_offset = 1, .mask = S2MPS11_IRQ_RTC60S_MASK, }, - [S2MPS11_IRQ_RTCA1] = { + [S2MPS11_IRQ_RTCA0] = { .reg_offset = 1, - .mask = S2MPS11_IRQ_RTCA1_MASK, + .mask = S2MPS11_IRQ_RTCA0_MASK, }, - [S2MPS11_IRQ_RTCA2] = { + [S2MPS11_IRQ_RTCA1] = { .reg_offset = 1, - .mask = S2MPS11_IRQ_RTCA2_MASK, + .mask = S2MPS11_IRQ_RTCA1_MASK, }, [S2MPS11_IRQ_SMPL] = { .reg_offset = 1, diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h index d43b4f9e7fb..abe1a6aae3b 100644 --- a/include/linux/mfd/samsung/irq.h +++ b/include/linux/mfd/samsung/irq.h @@ -24,8 +24,8 @@ enum s2mps11_irq { S2MPS11_IRQ_MRB, S2MPS11_IRQ_RTC60S, + S2MPS11_IRQ_RTCA0, S2MPS11_IRQ_RTCA1, - S2MPS11_IRQ_RTCA2, S2MPS11_IRQ_SMPL, S2MPS11_IRQ_RTC1S, S2MPS11_IRQ_WTSR, @@ -47,7 +47,7 @@ enum s2mps11_irq { #define S2MPS11_IRQ_RTC60S_MASK (1 << 0) #define S2MPS11_IRQ_RTCA1_MASK (1 << 1) -#define S2MPS11_IRQ_RTCA2_MASK (1 << 2) +#define S2MPS11_IRQ_RTCA0_MASK (1 << 2) #define S2MPS11_IRQ_SMPL_MASK (1 << 3) #define S2MPS11_IRQ_RTC1S_MASK (1 << 4) #define S2MPS11_IRQ_WTSR_MASK (1 << 5) -- cgit v1.2.3-70-g09d2 From dc6919663f7a02d02cc08d605a1f68d6cefe0042 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 28 Feb 2014 11:41:44 +0100 Subject: mfd: sec: Add support for S2MPS14 Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 48 ++++++++++-- drivers/mfd/sec-irq.c | 89 ++++++++++++++++++++- include/linux/mfd/samsung/core.h | 1 + include/linux/mfd/samsung/irq.h | 27 +++++++ include/linux/mfd/samsung/rtc.h | 55 +++++++++++-- include/linux/mfd/samsung/s2mps14.h | 152 ++++++++++++++++++++++++++++++++++++ 6 files changed, 360 insertions(+), 12 deletions(-) create mode 100644 include/linux/mfd/samsung/s2mps14.h (limited to 'include') diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 9623899e6f7..a4df76c160f 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -69,6 +70,16 @@ static const struct mfd_cell s2mps11_devs[] = { } }; +static const struct mfd_cell s2mps14_devs[] = { + { + .name = "s2mps14-pmic", + }, { + .name = "s2mps14-rtc", + }, { + .name = "s2mps14-clk", + } +}; + #ifdef CONFIG_OF static struct of_device_id sec_dt_match[] = { { .compatible = "samsung,s5m8767-pmic", @@ -77,6 +88,9 @@ static struct of_device_id sec_dt_match[] = { { .compatible = "samsung,s2mps11-pmic", .data = (void *)S2MPS11X, }, + { .compatible = "samsung,s2mps14-pmic", + .data = (void *)S2MPS14X, + }, {}, }; #endif @@ -120,6 +134,15 @@ static const struct regmap_config s2mps11_regmap_config = { .cache_type = REGCACHE_FLAT, }; +static const struct regmap_config s2mps14_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS14_REG_LDODSCH3, + .volatile_reg = s2mps11_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s5m8763_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -138,13 +161,20 @@ static const struct regmap_config s5m8767_regmap_config = { .cache_type = REGCACHE_FLAT, }; -static const struct regmap_config sec_rtc_regmap_config = { +static const struct regmap_config s5m_rtc_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = SEC_RTC_REG_MAX, }; +static const struct regmap_config s2mps14_rtc_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPS_RTC_REG_MAX, +}; + #ifdef CONFIG_OF /* * Only the common platform data elements for s5m8767 are parsed here from the @@ -239,19 +269,23 @@ static int sec_pmic_probe(struct i2c_client *i2c, * However we must pass something to devm_regmap_init_i2c() * so use S5M-like regmap config even though it wouldn't work. */ - regmap_rtc = &sec_rtc_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; + break; + case S2MPS14X: + regmap = &s2mps14_regmap_config; + regmap_rtc = &s2mps14_rtc_regmap_config; break; case S5M8763X: regmap = &s5m8763_regmap_config; - regmap_rtc = &sec_rtc_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; break; case S5M8767X: regmap = &s5m8767_regmap_config; - regmap_rtc = &sec_rtc_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; break; default: regmap = &sec_regmap_config; - regmap_rtc = &sec_rtc_regmap_config; + regmap_rtc = &s5m_rtc_regmap_config; break; } @@ -298,6 +332,10 @@ static int sec_pmic_probe(struct i2c_client *i2c, ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); break; + case S2MPS14X: + ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs, + ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL); + break; default: /* If this happens the probe function is problem */ BUG(); diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index e403c293b43..64e7913aadc 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -1,7 +1,7 @@ /* * sec-irq.c * - * Copyright (c) 2011 Samsung Electronics Co., Ltd + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify it @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -89,6 +90,76 @@ static const struct regmap_irq s2mps11_irqs[] = { }, }; +static const struct regmap_irq s2mps14_irqs[] = { + [S2MPS14_IRQ_PWRONF] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_PWRONF_MASK, + }, + [S2MPS14_IRQ_PWRONR] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_PWRONR_MASK, + }, + [S2MPS14_IRQ_JIGONBF] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_JIGONBF_MASK, + }, + [S2MPS14_IRQ_JIGONBR] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_JIGONBR_MASK, + }, + [S2MPS14_IRQ_ACOKBF] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_ACOKBF_MASK, + }, + [S2MPS14_IRQ_ACOKBR] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_ACOKBR_MASK, + }, + [S2MPS14_IRQ_PWRON1S] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_PWRON1S_MASK, + }, + [S2MPS14_IRQ_MRB] = { + .reg_offset = 0, + .mask = S2MPS11_IRQ_MRB_MASK, + }, + [S2MPS14_IRQ_RTC60S] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTC60S_MASK, + }, + [S2MPS14_IRQ_RTCA1] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTCA1_MASK, + }, + [S2MPS14_IRQ_RTCA0] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTCA0_MASK, + }, + [S2MPS14_IRQ_SMPL] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_SMPL_MASK, + }, + [S2MPS14_IRQ_RTC1S] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_RTC1S_MASK, + }, + [S2MPS14_IRQ_WTSR] = { + .reg_offset = 1, + .mask = S2MPS11_IRQ_WTSR_MASK, + }, + [S2MPS14_IRQ_INT120C] = { + .reg_offset = 2, + .mask = S2MPS11_IRQ_INT120C_MASK, + }, + [S2MPS14_IRQ_INT140C] = { + .reg_offset = 2, + .mask = S2MPS11_IRQ_INT140C_MASK, + }, + [S2MPS14_IRQ_TSD] = { + .reg_offset = 2, + .mask = S2MPS14_IRQ_TSD_MASK, + }, +}; static const struct regmap_irq s5m8767_irqs[] = { [S5M8767_IRQ_PWRR] = { @@ -246,6 +317,16 @@ static const struct regmap_irq_chip s2mps11_irq_chip = { .ack_base = S2MPS11_REG_INT1, }; +static const struct regmap_irq_chip s2mps14_irq_chip = { + .name = "s2mps14", + .irqs = s2mps14_irqs, + .num_irqs = ARRAY_SIZE(s2mps14_irqs), + .num_regs = 3, + .status_base = S2MPS14_REG_INT1, + .mask_base = S2MPS14_REG_INT1M, + .ack_base = S2MPS14_REG_INT1, +}; + static const struct regmap_irq_chip s5m8767_irq_chip = { .name = "s5m8767", .irqs = s5m8767_irqs, @@ -297,6 +378,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) sec_pmic->irq_base, &s2mps11_irq_chip, &sec_pmic->irq_data); break; + case S2MPS14X: + ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + sec_pmic->irq_base, &s2mps14_irq_chip, + &sec_pmic->irq_data); + break; default: dev_err(sec_pmic->dev, "Unknown device type %d\n", sec_pmic->device_type); diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 41c9bde410c..8e9bbb1083d 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -19,6 +19,7 @@ enum sec_device_type { S5M8763X, S5M8767X, S2MPS11X, + S2MPS14X, }; /** diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h index abe1a6aae3b..0065f6f1daf 100644 --- a/include/linux/mfd/samsung/irq.h +++ b/include/linux/mfd/samsung/irq.h @@ -55,6 +55,33 @@ enum s2mps11_irq { #define S2MPS11_IRQ_INT120C_MASK (1 << 0) #define S2MPS11_IRQ_INT140C_MASK (1 << 1) +enum s2mps14_irq { + S2MPS14_IRQ_PWRONF, + S2MPS14_IRQ_PWRONR, + S2MPS14_IRQ_JIGONBF, + S2MPS14_IRQ_JIGONBR, + S2MPS14_IRQ_ACOKBF, + S2MPS14_IRQ_ACOKBR, + S2MPS14_IRQ_PWRON1S, + S2MPS14_IRQ_MRB, + + S2MPS14_IRQ_RTC60S, + S2MPS14_IRQ_RTCA1, + S2MPS14_IRQ_RTCA0, + S2MPS14_IRQ_SMPL, + S2MPS14_IRQ_RTC1S, + S2MPS14_IRQ_WTSR, + + S2MPS14_IRQ_INT120C, + S2MPS14_IRQ_INT140C, + S2MPS14_IRQ_TSD, + + S2MPS14_IRQ_NR, +}; + +/* Masks for interrupts are the same as in s2mps11 */ +#define S2MPS14_IRQ_TSD_MASK (1 << 2) + enum s5m8767_irq { S5M8767_IRQ_PWRR, S5M8767_IRQ_PWRF, diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h index 4627f59ebd8..3e02b768d53 100644 --- a/include/linux/mfd/samsung/rtc.h +++ b/include/linux/mfd/samsung/rtc.h @@ -1,12 +1,17 @@ -/* rtc.h +/* rtc.h * - * Copyright (c) 2011 Samsung Electronics Co., Ltd + * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd * http://www.samsung.com * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * */ @@ -47,6 +52,37 @@ enum sec_rtc_reg { SEC_RTC_REG_MAX, }; +enum s2mps_rtc_reg { + S2MPS_RTC_CTRL, + S2MPS_WTSR_SMPL_CNTL, + S2MPS_RTC_UDR_CON, + S2MPS_RSVD, + S2MPS_RTC_SEC, + S2MPS_RTC_MIN, + S2MPS_RTC_HOUR, + S2MPS_RTC_WEEKDAY, + S2MPS_RTC_DATE, + S2MPS_RTC_MONTH, + S2MPS_RTC_YEAR, + S2MPS_ALARM0_SEC, + S2MPS_ALARM0_MIN, + S2MPS_ALARM0_HOUR, + S2MPS_ALARM0_WEEKDAY, + S2MPS_ALARM0_DATE, + S2MPS_ALARM0_MONTH, + S2MPS_ALARM0_YEAR, + S2MPS_ALARM1_SEC, + S2MPS_ALARM1_MIN, + S2MPS_ALARM1_HOUR, + S2MPS_ALARM1_WEEKDAY, + S2MPS_ALARM1_DATE, + S2MPS_ALARM1_MONTH, + S2MPS_ALARM1_YEAR, + S2MPS_OFFSRC, + + S2MPS_RTC_REG_MAX, +}; + #define RTC_I2C_ADDR (0x0C >> 1) #define HOUR_12 (1 << 7) @@ -56,6 +92,9 @@ enum sec_rtc_reg { #define ALARM1_STATUS (1 << 2) #define UPDATE_AD (1 << 0) +#define S2MPS_ALARM0_STATUS (1 << 2) +#define S2MPS_ALARM1_STATUS (1 << 1) + /* RTC Control Register */ #define BCD_EN_SHIFT 0 #define BCD_EN_MASK (1 << BCD_EN_SHIFT) @@ -64,6 +103,10 @@ enum sec_rtc_reg { /* RTC Update Register1 */ #define RTC_UDR_SHIFT 0 #define RTC_UDR_MASK (1 << RTC_UDR_SHIFT) +#define S2MPS_RTC_WUDR_SHIFT 4 +#define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT) +#define S2MPS_RTC_RUDR_SHIFT 0 +#define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT) #define RTC_TCON_SHIFT 1 #define RTC_TCON_MASK (1 << RTC_TCON_SHIFT) #define RTC_TIME_EN_SHIFT 3 diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h new file mode 100644 index 00000000000..ec1e0857ddd --- /dev/null +++ b/include/linux/mfd/samsung/s2mps14.h @@ -0,0 +1,152 @@ +/* + * s2mps14.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_MFD_S2MPS14_H +#define __LINUX_MFD_S2MPS14_H + +/* S2MPS14 registers */ +enum s2mps14_reg { + S2MPS14_REG_ID, + S2MPS14_REG_INT1, + S2MPS14_REG_INT2, + S2MPS14_REG_INT3, + S2MPS14_REG_INT1M, + S2MPS14_REG_INT2M, + S2MPS14_REG_INT3M, + S2MPS14_REG_ST1, + S2MPS14_REG_ST2, + S2MPS14_REG_PWRONSRC, + S2MPS14_REG_OFFSRC, + S2MPS14_REG_BU_CHG, + S2MPS14_REG_RTCCTRL, + S2MPS14_REG_CTRL1, + S2MPS14_REG_CTRL2, + S2MPS14_REG_RSVD1, + S2MPS14_REG_RSVD2, + S2MPS14_REG_RSVD3, + S2MPS14_REG_RSVD4, + S2MPS14_REG_RSVD5, + S2MPS14_REG_RSVD6, + S2MPS14_REG_CTRL3, + S2MPS14_REG_RSVD7, + S2MPS14_REG_RSVD8, + S2MPS14_REG_WRSTBI, + S2MPS14_REG_B1CTRL1, + S2MPS14_REG_B1CTRL2, + S2MPS14_REG_B2CTRL1, + S2MPS14_REG_B2CTRL2, + S2MPS14_REG_B3CTRL1, + S2MPS14_REG_B3CTRL2, + S2MPS14_REG_B4CTRL1, + S2MPS14_REG_B4CTRL2, + S2MPS14_REG_B5CTRL1, + S2MPS14_REG_B5CTRL2, + S2MPS14_REG_L1CTRL, + S2MPS14_REG_L2CTRL, + S2MPS14_REG_L3CTRL, + S2MPS14_REG_L4CTRL, + S2MPS14_REG_L5CTRL, + S2MPS14_REG_L6CTRL, + S2MPS14_REG_L7CTRL, + S2MPS14_REG_L8CTRL, + S2MPS14_REG_L9CTRL, + S2MPS14_REG_L10CTRL, + S2MPS14_REG_L11CTRL, + S2MPS14_REG_L12CTRL, + S2MPS14_REG_L13CTRL, + S2MPS14_REG_L14CTRL, + S2MPS14_REG_L15CTRL, + S2MPS14_REG_L16CTRL, + S2MPS14_REG_L17CTRL, + S2MPS14_REG_L18CTRL, + S2MPS14_REG_L19CTRL, + S2MPS14_REG_L20CTRL, + S2MPS14_REG_L21CTRL, + S2MPS14_REG_L22CTRL, + S2MPS14_REG_L23CTRL, + S2MPS14_REG_L24CTRL, + S2MPS14_REG_L25CTRL, + S2MPS14_REG_LDODSCH1, + S2MPS14_REG_LDODSCH2, + S2MPS14_REG_LDODSCH3, +}; + +/* S2MPS14 regulator ids */ +enum s2mps14_regulators { + S2MPS14_LDO1, + S2MPS14_LDO2, + S2MPS14_LDO3, + S2MPS14_LDO4, + S2MPS14_LDO5, + S2MPS14_LDO6, + S2MPS14_LDO7, + S2MPS14_LDO8, + S2MPS14_LDO9, + S2MPS14_LDO10, + S2MPS14_LDO11, + S2MPS14_LDO12, + S2MPS14_LDO13, + S2MPS14_LDO14, + S2MPS14_LDO15, + S2MPS14_LDO16, + S2MPS14_LDO17, + S2MPS14_LDO18, + S2MPS14_LDO19, + S2MPS14_LDO20, + S2MPS14_LDO21, + S2MPS14_LDO22, + S2MPS14_LDO23, + S2MPS14_LDO24, + S2MPS14_LDO25, + S2MPS14_BUCK1, + S2MPS14_BUCK2, + S2MPS14_BUCK3, + S2MPS14_BUCK4, + S2MPS14_BUCK5, + + S2MPS14_REGULATOR_MAX, +}; + +/* Regulator constraints for BUCKx */ +#define S2MPS14_BUCK1235_MIN_600MV 600000 +#define S2MPS14_BUCK4_MIN_1400MV 1400000 +#define S2MPS14_BUCK1235_STEP_6_25MV 6250 +#define S2MPS14_BUCK4_STEP_12_5MV 12500 +#define S2MPS14_BUCK1235_START_SEL 0x20 +#define S2MPS14_BUCK4_START_SEL 0x40 +/* + * Default ramp delay in uv/us. Datasheet says that ramp delay can be + * controlled however it does not specify which register is used for that. + * Let's assume that default value will be set. + */ +#define S2MPS14_BUCK_RAMP_DELAY 12500 + +/* Regulator constraints for different types of LDOx */ +#define S2MPS14_LDO_MIN_800MV 800000 +#define S2MPS14_LDO_MIN_1800MV 1800000 +#define S2MPS14_LDO_STEP_12_5MV 12500 +#define S2MPS14_LDO_STEP_25MV 25000 + +#define S2MPS14_LDO_VSEL_MASK 0x3F +#define S2MPS14_BUCK_VSEL_MASK 0xFF +#define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT) +#define S2MPS14_ENABLE_SHIFT 6 +#define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1) +#define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1) + +#endif /* __LINUX_MFD_S2MPS14_H */ -- cgit v1.2.3-70-g09d2 From 8f695de515b9e08e30c5b7fae48c0672c8361c51 Mon Sep 17 00:00:00 2001 From: Pankaj Dubey Date: Thu, 13 Mar 2014 11:14:07 +0900 Subject: mfd: sec-core: Silence compiler warning When used 64bit compiler GCC warns as drivers/mfd/sec-core.c:199:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Pankaj Dubey Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 6 +++--- include/linux/mfd/samsung/core.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index d163c66edeb..3fc3ebdd7b8 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -212,17 +212,17 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( } #endif -static inline int sec_i2c_get_driver_data(struct i2c_client *i2c, +static inline unsigned long sec_i2c_get_driver_data(struct i2c_client *i2c, const struct i2c_device_id *id) { #ifdef CONFIG_OF if (i2c->dev.of_node) { const struct of_device_id *match; match = of_match_node(sec_dt_match, i2c->dev.of_node); - return (int)match->data; + return (unsigned long)match->data; } #endif - return (int)id->driver_data; + return id->driver_data; } static int sec_pmic_probe(struct i2c_client *i2c, diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 8e9bbb1083d..5073d81660e 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -51,7 +51,7 @@ struct sec_pmic_dev { struct regmap_irq_chip_data *irq_data; int ono; - int type; + unsigned long type; bool wakeup; bool wtsr_smpl; }; -- cgit v1.2.3-70-g09d2 From ce24991e1e4d7bee05bcc0e156b0b1c2ef791dd3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 14 Mar 2014 17:21:57 +0530 Subject: mfd: Add support for S2MPA01 device Add the necessary entries required for S2MPA01 multi-function device. While at it also convert whitespaces to tabs in core.h. Signed-off-by: Sachin Kamat Signed-off-by: Lee Jones --- drivers/mfd/sec-core.c | 49 ++++++++- include/linux/mfd/samsung/core.h | 16 ++- include/linux/mfd/samsung/irq.h | 50 ++++++++++ include/linux/mfd/samsung/s2mpa01.h | 192 ++++++++++++++++++++++++++++++++++++ 4 files changed, 297 insertions(+), 10 deletions(-) create mode 100644 include/linux/mfd/samsung/s2mpa01.h (limited to 'include') diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 3fc3ebdd7b8..281a8274727 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -80,21 +81,43 @@ static const struct mfd_cell s2mps14_devs[] = { } }; +static const struct mfd_cell s2mpa01_devs[] = { + { + .name = "s2mpa01-pmic", + }, +}; + #ifdef CONFIG_OF static struct of_device_id sec_dt_match[] = { { .compatible = "samsung,s5m8767-pmic", .data = (void *)S5M8767X, - }, - { .compatible = "samsung,s2mps11-pmic", + }, { + .compatible = "samsung,s2mps11-pmic", .data = (void *)S2MPS11X, - }, - { .compatible = "samsung,s2mps14-pmic", + }, { + .compatible = "samsung,s2mps14-pmic", .data = (void *)S2MPS14X, + }, { + .compatible = "samsung,s2mpa01-pmic", + .data = (void *)S2MPA01, + }, { + /* Sentinel */ }, - {}, }; #endif +static bool s2mpa01_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case S2MPA01_REG_INT1M: + case S2MPA01_REG_INT2M: + case S2MPA01_REG_INT3M: + return false; + default: + return true; + } +} + static bool s2mps11_volatile(struct device *dev, unsigned int reg) { switch (reg) { @@ -125,6 +148,15 @@ static const struct regmap_config sec_regmap_config = { .val_bits = 8, }; +static const struct regmap_config s2mpa01_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = S2MPA01_REG_LDO_OVCB4, + .volatile_reg = s2mpa01_volatile, + .cache_type = REGCACHE_FLAT, +}; + static const struct regmap_config s2mps11_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -261,6 +293,9 @@ static int sec_pmic_probe(struct i2c_client *i2c, } switch (sec_pmic->device_type) { + case S2MPA01: + regmap = &s2mpa01_regmap_config; + break; case S2MPS11X: regmap = &s2mps11_regmap_config; /* @@ -332,6 +367,10 @@ static int sec_pmic_probe(struct i2c_client *i2c, ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs, ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL); break; + case S2MPA01: + ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs, + ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL); + break; case S2MPS11X: ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 5073d81660e..900bc9e1888 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -18,6 +18,7 @@ enum sec_device_type { S5M8751X, S5M8763X, S5M8767X, + S2MPA01, S2MPS11X, S2MPS14X, }; @@ -93,7 +94,7 @@ struct sec_platform_data { int buck3_default_idx; int buck4_default_idx; - int buck_ramp_delay; + int buck_ramp_delay; int buck2_ramp_delay; int buck34_ramp_delay; @@ -101,10 +102,15 @@ struct sec_platform_data { int buck16_ramp_delay; int buck7810_ramp_delay; int buck9_ramp_delay; - - bool buck2_ramp_enable; - bool buck3_ramp_enable; - bool buck4_ramp_enable; + int buck24_ramp_delay; + int buck3_ramp_delay; + int buck7_ramp_delay; + int buck8910_ramp_delay; + + bool buck1_ramp_enable; + bool buck2_ramp_enable; + bool buck3_ramp_enable; + bool buck4_ramp_enable; bool buck6_ramp_enable; int buck2_init; diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h index 0065f6f1daf..1224f447356 100644 --- a/include/linux/mfd/samsung/irq.h +++ b/include/linux/mfd/samsung/irq.h @@ -13,6 +13,56 @@ #ifndef __LINUX_MFD_SEC_IRQ_H #define __LINUX_MFD_SEC_IRQ_H +enum s2mpa01_irq { + S2MPA01_IRQ_PWRONF, + S2MPA01_IRQ_PWRONR, + S2MPA01_IRQ_JIGONBF, + S2MPA01_IRQ_JIGONBR, + S2MPA01_IRQ_ACOKBF, + S2MPA01_IRQ_ACOKBR, + S2MPA01_IRQ_PWRON1S, + S2MPA01_IRQ_MRB, + + S2MPA01_IRQ_RTC60S, + S2MPA01_IRQ_RTCA1, + S2MPA01_IRQ_RTCA0, + S2MPA01_IRQ_SMPL, + S2MPA01_IRQ_RTC1S, + S2MPA01_IRQ_WTSR, + + S2MPA01_IRQ_INT120C, + S2MPA01_IRQ_INT140C, + S2MPA01_IRQ_LDO3_TSD, + S2MPA01_IRQ_B16_TSD, + S2MPA01_IRQ_B24_TSD, + S2MPA01_IRQ_B35_TSD, + + S2MPA01_IRQ_NR, +}; + +#define S2MPA01_IRQ_PWRONF_MASK (1 << 0) +#define S2MPA01_IRQ_PWRONR_MASK (1 << 1) +#define S2MPA01_IRQ_JIGONBF_MASK (1 << 2) +#define S2MPA01_IRQ_JIGONBR_MASK (1 << 3) +#define S2MPA01_IRQ_ACOKBF_MASK (1 << 4) +#define S2MPA01_IRQ_ACOKBR_MASK (1 << 5) +#define S2MPA01_IRQ_PWRON1S_MASK (1 << 6) +#define S2MPA01_IRQ_MRB_MASK (1 << 7) + +#define S2MPA01_IRQ_RTC60S_MASK (1 << 0) +#define S2MPA01_IRQ_RTCA1_MASK (1 << 1) +#define S2MPA01_IRQ_RTCA0_MASK (1 << 2) +#define S2MPA01_IRQ_SMPL_MASK (1 << 3) +#define S2MPA01_IRQ_RTC1S_MASK (1 << 4) +#define S2MPA01_IRQ_WTSR_MASK (1 << 5) + +#define S2MPA01_IRQ_INT120C_MASK (1 << 0) +#define S2MPA01_IRQ_INT140C_MASK (1 << 1) +#define S2MPA01_IRQ_LDO3_TSD_MASK (1 << 2) +#define S2MPA01_IRQ_B16_TSD_MASK (1 << 3) +#define S2MPA01_IRQ_B24_TSD_MASK (1 << 4) +#define S2MPA01_IRQ_B35_TSD_MASK (1 << 5) + enum s2mps11_irq { S2MPS11_IRQ_PWRONF, S2MPS11_IRQ_PWRONR, diff --git a/include/linux/mfd/samsung/s2mpa01.h b/include/linux/mfd/samsung/s2mpa01.h new file mode 100644 index 00000000000..fbc63bc0d6a --- /dev/null +++ b/include/linux/mfd/samsung/s2mpa01.h @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_S2MPA01_H +#define __LINUX_MFD_S2MPA01_H + +/* S2MPA01 registers */ +enum s2mpa01_reg { + S2MPA01_REG_ID, + S2MPA01_REG_INT1, + S2MPA01_REG_INT2, + S2MPA01_REG_INT3, + S2MPA01_REG_INT1M, + S2MPA01_REG_INT2M, + S2MPA01_REG_INT3M, + S2MPA01_REG_ST1, + S2MPA01_REG_ST2, + S2MPA01_REG_PWRONSRC, + S2MPA01_REG_OFFSRC, + S2MPA01_REG_RTC_BUF, + S2MPA01_REG_CTRL1, + S2MPA01_REG_ETC_TEST, + S2MPA01_REG_RSVD1, + S2MPA01_REG_BU_CHG, + S2MPA01_REG_RAMP1, + S2MPA01_REG_RAMP2, + S2MPA01_REG_LDO_DSCH1, + S2MPA01_REG_LDO_DSCH2, + S2MPA01_REG_LDO_DSCH3, + S2MPA01_REG_LDO_DSCH4, + S2MPA01_REG_OTP_ADRL, + S2MPA01_REG_OTP_ADRH, + S2MPA01_REG_OTP_DATA, + S2MPA01_REG_MON1SEL, + S2MPA01_REG_MON2SEL, + S2MPA01_REG_LEE, + S2MPA01_REG_RSVD2, + S2MPA01_REG_RSVD3, + S2MPA01_REG_RSVD4, + S2MPA01_REG_RSVD5, + S2MPA01_REG_RSVD6, + S2MPA01_REG_TOP_RSVD, + S2MPA01_REG_DVS_SEL, + S2MPA01_REG_DVS_PTR, + S2MPA01_REG_DVS_DATA, + S2MPA01_REG_RSVD_NO, + S2MPA01_REG_UVLO, + S2MPA01_REG_LEE_NO, + S2MPA01_REG_B1CTRL1, + S2MPA01_REG_B1CTRL2, + S2MPA01_REG_B2CTRL1, + S2MPA01_REG_B2CTRL2, + S2MPA01_REG_B3CTRL1, + S2MPA01_REG_B3CTRL2, + S2MPA01_REG_B4CTRL1, + S2MPA01_REG_B4CTRL2, + S2MPA01_REG_B5CTRL1, + S2MPA01_REG_B5CTRL2, + S2MPA01_REG_B5CTRL3, + S2MPA01_REG_B5CTRL4, + S2MPA01_REG_B5CTRL5, + S2MPA01_REG_B5CTRL6, + S2MPA01_REG_B6CTRL1, + S2MPA01_REG_B6CTRL2, + S2MPA01_REG_B7CTRL1, + S2MPA01_REG_B7CTRL2, + S2MPA01_REG_B8CTRL1, + S2MPA01_REG_B8CTRL2, + S2MPA01_REG_B9CTRL1, + S2MPA01_REG_B9CTRL2, + S2MPA01_REG_B10CTRL1, + S2MPA01_REG_B10CTRL2, + S2MPA01_REG_L1CTRL, + S2MPA01_REG_L2CTRL, + S2MPA01_REG_L3CTRL, + S2MPA01_REG_L4CTRL, + S2MPA01_REG_L5CTRL, + S2MPA01_REG_L6CTRL, + S2MPA01_REG_L7CTRL, + S2MPA01_REG_L8CTRL, + S2MPA01_REG_L9CTRL, + S2MPA01_REG_L10CTRL, + S2MPA01_REG_L11CTRL, + S2MPA01_REG_L12CTRL, + S2MPA01_REG_L13CTRL, + S2MPA01_REG_L14CTRL, + S2MPA01_REG_L15CTRL, + S2MPA01_REG_L16CTRL, + S2MPA01_REG_L17CTRL, + S2MPA01_REG_L18CTRL, + S2MPA01_REG_L19CTRL, + S2MPA01_REG_L20CTRL, + S2MPA01_REG_L21CTRL, + S2MPA01_REG_L22CTRL, + S2MPA01_REG_L23CTRL, + S2MPA01_REG_L24CTRL, + S2MPA01_REG_L25CTRL, + S2MPA01_REG_L26CTRL, + + S2MPA01_REG_LDO_OVCB1, + S2MPA01_REG_LDO_OVCB2, + S2MPA01_REG_LDO_OVCB3, + S2MPA01_REG_LDO_OVCB4, + +}; + +/* S2MPA01 regulator ids */ +enum s2mpa01_regulators { + S2MPA01_LDO1, + S2MPA01_LDO2, + S2MPA01_LDO3, + S2MPA01_LDO4, + S2MPA01_LDO5, + S2MPA01_LDO6, + S2MPA01_LDO7, + S2MPA01_LDO8, + S2MPA01_LDO9, + S2MPA01_LDO10, + S2MPA01_LDO11, + S2MPA01_LDO12, + S2MPA01_LDO13, + S2MPA01_LDO14, + S2MPA01_LDO15, + S2MPA01_LDO16, + S2MPA01_LDO17, + S2MPA01_LDO18, + S2MPA01_LDO19, + S2MPA01_LDO20, + S2MPA01_LDO21, + S2MPA01_LDO22, + S2MPA01_LDO23, + S2MPA01_LDO24, + S2MPA01_LDO25, + S2MPA01_LDO26, + + S2MPA01_BUCK1, + S2MPA01_BUCK2, + S2MPA01_BUCK3, + S2MPA01_BUCK4, + S2MPA01_BUCK5, + S2MPA01_BUCK6, + S2MPA01_BUCK7, + S2MPA01_BUCK8, + S2MPA01_BUCK9, + S2MPA01_BUCK10, + + S2MPA01_REGULATOR_MAX, +}; + +#define S2MPA01_BUCK_MIN1 600000 +#define S2MPA01_BUCK_MIN2 800000 +#define S2MPA01_BUCK_MIN3 1000000 +#define S2MPA01_BUCK_MIN4 1500000 +#define S2MPA01_LDO_MIN 800000 + +#define S2MPA01_BUCK_STEP1 6250 +#define S2MPA01_BUCK_STEP2 12500 + +#define S2MPA01_LDO_STEP1 50000 +#define S2MPA01_LDO_STEP2 25000 + +#define S2MPA01_LDO_VSEL_MASK 0x3F +#define S2MPA01_BUCK_VSEL_MASK 0xFF +#define S2MPA01_ENABLE_MASK (0x03 << S2MPA01_ENABLE_SHIFT) +#define S2MPA01_ENABLE_SHIFT 0x06 +#define S2MPA01_LDO_N_VOLTAGES (S2MPA01_LDO_VSEL_MASK + 1) +#define S2MPA01_BUCK_N_VOLTAGES (S2MPA01_BUCK_VSEL_MASK + 1) + +#define S2MPA01_RAMP_DELAY 12500 /* uV/us */ + +#define S2MPA01_BUCK16_RAMP_SHIFT 4 +#define S2MPA01_BUCK24_RAMP_SHIFT 6 +#define S2MPA01_BUCK3_RAMP_SHIFT 4 +#define S2MPA01_BUCK5_RAMP_SHIFT 6 +#define S2MPA01_BUCK7_RAMP_SHIFT 2 +#define S2MPA01_BUCK8910_RAMP_SHIFT 0 + +#define S2MPA01_BUCK1_RAMP_EN_SHIFT 3 +#define S2MPA01_BUCK2_RAMP_EN_SHIFT 2 +#define S2MPA01_BUCK3_RAMP_EN_SHIFT 1 +#define S2MPA01_BUCK4_RAMP_EN_SHIFT 0 +#define S2MPA01_PMIC_EN_SHIFT 6 + +#endif /*__LINUX_MFD_S2MPA01_H */ -- cgit v1.2.3-70-g09d2 From 05be09bb5ec8d12051515087a1983745dc93d906 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 7 Mar 2014 11:10:51 +0100 Subject: regulator: s2mps11: Add set_suspend_disable for S2MPS14 S2MPS14 regulators support suspend mode where their status is controlled by PWREN coming from SoC. This patch implements the set_suspend_disable for S2MPS14 regulators. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown --- drivers/regulator/s2mps11.c | 51 ++++++++++++++++++++++++++++++++++++- include/linux/mfd/samsung/s2mps14.h | 2 ++ 2 files changed, 52 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 65697b1a26c..cdd8d406612 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -39,6 +39,11 @@ struct s2mps11_info { int ramp_delay16; int ramp_delay7810; int ramp_delay9; + /* + * One bit for each S2MPS14 regulator whether the suspend mode + * was enabled. + */ + unsigned int s2mps14_suspend_state:30; }; static int get_ramp_delay(int ramp_delay) @@ -399,15 +404,59 @@ static const struct regulator_desc s2mps11_regulators[] = { regulator_desc_s2mps11_buck10, }; +static int s2mps14_regulator_enable(struct regulator_dev *rdev) +{ + struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + unsigned int val; + + if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev))) + val = S2MPS14_ENABLE_SUSPEND; + else + val = rdev->desc->enable_mask; + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val); +} + +static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev) +{ + int ret; + unsigned int val; + struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev); + + /* LDO3 should be always on and does not support suspend mode */ + if (rdev_get_id(rdev) == S2MPS14_LDO3) + return 0; + + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); + if (ret < 0) + return ret; + + s2mps11->s2mps14_suspend_state |= (1 << rdev_get_id(rdev)); + /* + * Don't enable suspend mode if regulator is already disabled because + * this would effectively for a short time turn on the regulator after + * resuming. + * However we still want to toggle the suspend_state bit for regulator + * in case if it got enabled before suspending the system. + */ + if (!(val & rdev->desc->enable_mask)) + return 0; + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, S2MPS14_ENABLE_SUSPEND); +} + static struct regulator_ops s2mps14_reg_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, + .enable = s2mps14_regulator_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_disable = s2mps14_regulator_set_suspend_disable, }; #define regulator_desc_s2mps14_ldo1(num) { \ diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h index ec1e0857ddd..4b449b8ac54 100644 --- a/include/linux/mfd/samsung/s2mps14.h +++ b/include/linux/mfd/samsung/s2mps14.h @@ -146,6 +146,8 @@ enum s2mps14_regulators { #define S2MPS14_BUCK_VSEL_MASK 0xFF #define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT) #define S2MPS14_ENABLE_SHIFT 6 +/* On/Off controlled by PWREN */ +#define S2MPS14_ENABLE_SUSPEND (0x01 << S2MPS14_ENABLE_SHIFT) #define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1) #define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1) -- cgit v1.2.3-70-g09d2