From 800b399669ad495ad4361d134df87401ae36f44f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 3 Dec 2006 21:34:13 +0900 Subject: [PATCH] libata: always use polling IDENTIFY libata switched to IRQ-driven IDENTIFY when IRQ-driven PIO was introduced. This has caused a lot of problems including device misdetection and phantom device. ATA_FLAG_DETECT_POLLING was added recently to selectively use polling IDENTIFY on problemetic drivers but many controllers and devices are affected by this problem and trying to adding ATA_FLAG_DETECT_POLLING for each such case is diffcult and not very rewarding. This patch makes libata always use polling IDENTIFY. This is consistent with libata's original behavior and drivers/ide's behavior. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/libata.h b/include/linux/libata.h index 8b57b6a806c..202283b5df9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -176,9 +176,7 @@ enum { ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), - ATA_FLAG_DETECT_POLLING = (1 << 14), /* detect device presence by - * polling IDENTIFY */ - ATA_FLAG_SETXFER_POLLING= (1 << 15), /* use polling for SETXFER */ + ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be -- cgit v1.2.3-70-g09d2