From 4accdff7a3e397b43e50f605ee561ba7994745c7 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 2 Apr 2012 17:55:48 +0200 Subject: mfd : Fix dbx500 compilation error The ux500 default config enables the db5500 and the db8500. The incoming cpuidle driver uses the 'prcmu_enable_wakeups' and the 'prcmu_set_power_state' functions but these ones are defined but not implemented for the db5500, leading to an unresolved symbol error at link time. In order to compile, we have to disable the db5500 support which is not acceptable for the default config. I noticed there are also some other functions which are defined but not implemented. This patch fix this by removing the functions definitions and move out of the config section the empty functions which are normally used when the DB550 config is disabled. Only the functions which are not implemented are concerned by this modification. Signed-off-by: Daniel Lezcano Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/db5500-prcmu.h | 88 +++++++++++++++++----------------------- 1 file changed, 37 insertions(+), 51 deletions(-) (limited to 'include') diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h index 9890687f582..5a049dfaf15 100644 --- a/include/linux/mfd/db5500-prcmu.h +++ b/include/linux/mfd/db5500-prcmu.h @@ -8,41 +8,14 @@ #ifndef __MFD_DB5500_PRCMU_H #define __MFD_DB5500_PRCMU_H -#ifdef CONFIG_MFD_DB5500_PRCMU - -void db5500_prcmu_early_init(void); -int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state); -int db5500_prcmu_set_display_clocks(void); -int db5500_prcmu_disable_dsipll(void); -int db5500_prcmu_enable_dsipll(void); -int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); -int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -void db5500_prcmu_enable_wakeups(u32 wakeups); -int db5500_prcmu_request_clock(u8 clock, bool enable); -void db5500_prcmu_config_abb_event_readout(u32 abb_events); -void db5500_prcmu_get_abb_event_buffer(void __iomem **buf); -int prcmu_resetout(u8 resoutn, u8 state); -int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll); -int db5500_prcmu_config_esram0_deep_sleep(u8 state); -void db5500_prcmu_system_reset(u16 reset_code); -u16 db5500_prcmu_get_reset_code(void); -bool db5500_prcmu_is_ac_wake_requested(void); -int db5500_prcmu_set_arm_opp(u8 opp); -int db5500_prcmu_get_arm_opp(void); - -#else /* !CONFIG_UX500_SOC_DB5500 */ - -static inline void db5500_prcmu_early_init(void) {} - -static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +static inline int prcmu_resetout(u8 resoutn, u8 state) { - return -ENOSYS; + return 0; } -static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state) { - return -ENOSYS; + return 0; } static inline int db5500_prcmu_request_clock(u8 clock, bool enable) @@ -50,69 +23,82 @@ static inline int db5500_prcmu_request_clock(u8 clock, bool enable) return 0; } -static inline int db5500_prcmu_set_display_clocks(void) +static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) { return 0; } -static inline int db5500_prcmu_disable_dsipll(void) +static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state) { return 0; } -static inline int db5500_prcmu_enable_dsipll(void) +static inline u16 db5500_prcmu_get_reset_code(void) { return 0; } -static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state) +static inline bool db5500_prcmu_is_ac_wake_requested(void) { return 0; } -static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {} - -static inline int prcmu_resetout(u8 resoutn, u8 state) +static inline int db5500_prcmu_set_arm_opp(u8 opp) { return 0; } -static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state) +static inline int db5500_prcmu_get_arm_opp(void) { return 0; } -static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {} static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {} -static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll) -{ - return 0; -} +static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {} static inline void db5500_prcmu_system_reset(u16 reset_code) {} -static inline u16 db5500_prcmu_get_reset_code(void) +static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {} + +#ifdef CONFIG_MFD_DB5500_PRCMU + +void db5500_prcmu_early_init(void); +int db5500_prcmu_set_display_clocks(void); +int db5500_prcmu_disable_dsipll(void); +int db5500_prcmu_enable_dsipll(void); +int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +#else /* !CONFIG_UX500_SOC_DB5500 */ + +static inline void db5500_prcmu_early_init(void) {} + +static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) { - return 0; + return -ENOSYS; } -static inline bool db5500_prcmu_is_ac_wake_requested(void) +static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) { - return 0; + return -ENOSYS; } -static inline int db5500_prcmu_set_arm_opp(u8 opp) +static inline int db5500_prcmu_set_display_clocks(void) { return 0; } -static inline int db5500_prcmu_get_arm_opp(void) +static inline int db5500_prcmu_disable_dsipll(void) { return 0; } +static inline int db5500_prcmu_enable_dsipll(void) +{ + return 0; +} #endif /* CONFIG_MFD_DB5500_PRCMU */ -- cgit v1.2.3-70-g09d2 From 8eaeb9393397be8eb700ab38a69c450975463b77 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 3 Apr 2012 11:56:51 +0300 Subject: mfd: Convert twl6040 to i2c driver, and separate it from twl core Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi Reviewed-by: Mark Brown Acked-by: Tony Lindgren Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz --- arch/arm/mach-omap2/board-4430sdp.c | 12 ++-- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-omap4panda.c | 13 ++-- arch/arm/mach-omap2/twl-common.c | 37 +++++++++-- arch/arm/mach-omap2/twl-common.h | 10 ++- drivers/input/misc/Kconfig | 3 +- drivers/input/misc/twl6040-vibra.c | 4 +- drivers/mfd/Kconfig | 11 +++- drivers/mfd/twl6040-core.c | 114 ++++++++++++++++++++------------- include/linux/i2c/twl.h | 12 ---- include/linux/mfd/twl6040.h | 27 ++++++++ sound/soc/codecs/Kconfig | 3 +- sound/soc/codecs/twl6040.c | 3 +- sound/soc/omap/Kconfig | 2 +- 14 files changed, 159 insertions(+), 94 deletions(-) (limited to 'include') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b..130ab00c09a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b517..098d183a008 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f012..1b782ba5343 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d..7a7b89304c4 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27..09627483a57 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2d787796bf5..7faf4a7fcaa 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -380,8 +380,7 @@ config INPUT_TWL4030_VIBRA config INPUT_TWL6040_VIBRA tristate "Support for TWL6040 Vibrator" - depends on TWL4030_CORE - select TWL6040_CORE + depends on TWL6040_CORE select INPUT_FF_MEMLESS help This option enables support for TWL6040 Vibrator Driver. diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 45874fed523..14e94f56cb7 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include @@ -257,7 +257,7 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); static int __devinit twl6040_vibra_probe(struct platform_device *pdev) { - struct twl4030_vibra_data *pdata = pdev->dev.platform_data; + struct twl6040_vibra_data *pdata = pdev->dev.platform_data; struct vibra_info *info; int ret; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463cc09c..11e44386fa9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -268,10 +268,17 @@ config TWL6030_PWM This is used to control charging LED brightness. config TWL6040_CORE - bool - depends on TWL4030_CORE && GENERIC_HARDIRQS + bool "Support for TWL6040 audio codec" + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE + select REGMAP_I2C default n + help + Say yes here if you want support for Texas Instruments TWL6040 audio + codec. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device (audio, vibra). config MFD_STMPE bool "Support STMicroelectronics STMPE" diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b2d8e512d3c..2d6bedadca0 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -30,7 +30,9 @@ #include #include #include -#include +#include +#include +#include #include #include @@ -39,7 +41,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) { int ret; - u8 val = 0; + unsigned int val; mutex_lock(&twl6040->io_mutex); /* Vibra control registers from cache */ @@ -47,7 +49,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) reg == TWL6040_REG_VIBCTLR)) { val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)]; } else { - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + ret = regmap_read(twl6040->regmap, reg, &val); if (ret < 0) { mutex_unlock(&twl6040->io_mutex); return ret; @@ -64,7 +66,7 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) int ret; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); + ret = regmap_write(twl6040->regmap, reg, val); /* Cache the vibra control registers */ if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR) twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val; @@ -77,16 +79,9 @@ EXPORT_SYMBOL(twl6040_reg_write); int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val |= mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, mask); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -95,16 +90,9 @@ EXPORT_SYMBOL(twl6040_set_bits); int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val &= ~mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, 0); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -494,32 +482,58 @@ static struct resource twl6040_codec_rsrc[] = { }, }; -static int __devinit twl6040_probe(struct platform_device *pdev) +static bool twl6040_readable_reg(struct device *dev, unsigned int reg) { - struct twl4030_audio_data *pdata = pdev->dev.platform_data; + /* Register 0 is not readable */ + if (!reg) + return false; + return true; +} + +static struct regmap_config twl6040_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TWL6040_REG_STATUS, /* 0x2e */ + + .readable_reg = twl6040_readable_reg, +}; + +static int __devinit twl6040_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct twl6040_platform_data *pdata = client->dev.platform_data; struct twl6040 *twl6040; struct mfd_cell *cell = NULL; int ret, children = 0; if (!pdata) { - dev_err(&pdev->dev, "Platform data is missing\n"); + dev_err(&client->dev, "Platform data is missing\n"); return -EINVAL; } /* In order to operate correctly we need valid interrupt config */ - if (!pdata->naudint_irq || !pdata->irq_base) { - dev_err(&pdev->dev, "Invalid IRQ configuration\n"); + if (!client->irq || !pdata->irq_base) { + dev_err(&client->dev, "Invalid IRQ configuration\n"); return -EINVAL; } - twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); - if (!twl6040) - return -ENOMEM; + twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040), + GFP_KERNEL); + if (!twl6040) { + ret = -ENOMEM; + goto err; + } + + twl6040->regmap = regmap_init_i2c(client, &twl6040_regmap_config); + if (IS_ERR(twl6040->regmap)) { + ret = PTR_ERR(twl6040->regmap); + goto err; + } - platform_set_drvdata(pdev, twl6040); + i2c_set_clientdata(client, twl6040); - twl6040->dev = &pdev->dev; - twl6040->irq = pdata->naudint_irq; + twl6040->dev = &client->dev; + twl6040->irq = client->irq; twl6040->irq_base = pdata->irq_base; mutex_init(&twl6040->mutex); @@ -588,12 +602,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev) } if (children) { - ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells, + ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, NULL, 0); if (ret) goto mfd_err; } else { - dev_err(&pdev->dev, "No platform data found for children\n"); + dev_err(&client->dev, "No platform data found for children\n"); ret = -ENODEV; goto mfd_err; } @@ -608,14 +622,15 @@ gpio2_err: if (gpio_is_valid(twl6040->audpwron)) gpio_free(twl6040->audpwron); gpio1_err: - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); +err: return ret; } -static int __devexit twl6040_remove(struct platform_device *pdev) +static int __devexit twl6040_remove(struct i2c_client *client) { - struct twl6040 *twl6040 = platform_get_drvdata(pdev); + struct twl6040 *twl6040 = i2c_get_clientdata(client); if (twl6040->power_count) twl6040_power(twl6040, 0); @@ -626,23 +641,30 @@ static int __devexit twl6040_remove(struct platform_device *pdev) free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); twl6040_irq_exit(twl6040); - mfd_remove_devices(&pdev->dev); - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + mfd_remove_devices(&client->dev); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); return 0; } -static struct platform_driver twl6040_driver = { +static const struct i2c_device_id twl6040_i2c_id[] = { + { "twl6040", 0, }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id); + +static struct i2c_driver twl6040_driver = { + .driver = { + .name = "twl6040", + .owner = THIS_MODULE, + }, .probe = twl6040_probe, .remove = __devexit_p(twl6040_remove), - .driver = { - .owner = THIS_MODULE, - .name = "twl6040", - }, + .id_table = twl6040_i2c_id, }; -module_platform_driver(twl6040_driver); +module_i2c_driver(twl6040_driver); MODULE_DESCRIPTION("TWL6040 MFD"); MODULE_AUTHOR("Misael Lopez Cruz "); diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 2463b610033..1f90de0cfdb 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -666,23 +666,11 @@ struct twl4030_codec_data { unsigned int check_defaults:1; unsigned int reset_registers:1; unsigned int hs_extmute:1; - u16 hs_left_step; - u16 hs_right_step; - u16 hf_left_step; - u16 hf_right_step; void (*set_hs_extmute)(int mute); }; struct twl4030_vibra_data { unsigned int coexist; - - /* twl6040 */ - unsigned int vibldrv_res; /* left driver resistance */ - unsigned int vibrdrv_res; /* right driver resistance */ - unsigned int viblmotor_res; /* left motor resistance */ - unsigned int vibrmotor_res; /* right motor resistance */ - int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ - int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ }; struct twl4030_audio_data { diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 9bc9ac651da..b15b5f03f5c 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -174,8 +174,35 @@ #define TWL6040_SYSCLK_SEL_LPPLL 0 #define TWL6040_SYSCLK_SEL_HPPLL 1 +struct twl6040_codec_data { + u16 hs_left_step; + u16 hs_right_step; + u16 hf_left_step; + u16 hf_right_step; +}; + +struct twl6040_vibra_data { + unsigned int vibldrv_res; /* left driver resistance */ + unsigned int vibrdrv_res; /* right driver resistance */ + unsigned int viblmotor_res; /* left motor resistance */ + unsigned int vibrmotor_res; /* right motor resistance */ + int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ + int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ +}; + +struct twl6040_platform_data { + int audpwron_gpio; /* audio power-on gpio */ + unsigned int irq_base; + + struct twl6040_codec_data *codec; + struct twl6040_vibra_data *vibra; +}; + +struct regmap; + struct twl6040 { struct device *dev; + struct regmap *regmap; struct mutex mutex; struct mutex io_mutex; struct mutex irq_mutex; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6508e8b790b..59d8efaa17e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -57,7 +57,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_TPA6130A2 if I2C select SND_SOC_TLV320DAC33 if I2C select SND_SOC_TWL4030 if TWL4030_CORE - select SND_SOC_TWL6040 if TWL4030_CORE + select SND_SOC_TWL6040 if TWL6040_CORE select SND_SOC_UDA134X select SND_SOC_UDA1380 if I2C select SND_SOC_WL1273 if MFD_WL1273_CORE @@ -276,7 +276,6 @@ config SND_SOC_TWL4030 tristate config SND_SOC_TWL6040 - select TWL6040_CORE tristate config SND_SOC_UDA134X diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index 2d8c6b825e5..dc7509b9d53 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -1528,7 +1527,7 @@ static int twl6040_resume(struct snd_soc_codec *codec) static int twl6040_probe(struct snd_soc_codec *codec) { struct twl6040_data *priv; - struct twl4030_codec_data *pdata = dev_get_platdata(codec->dev); + struct twl6040_codec_data *pdata = dev_get_platdata(codec->dev); struct platform_device *pdev = container_of(codec->dev, struct platform_device, dev); int ret = 0; diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index e00dd0b1139..deafbfaacdb 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -97,7 +97,7 @@ config SND_OMAP_SOC_SDP3430 config SND_OMAP_SOC_OMAP_ABE_TWL6040 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" - depends on TWL4030_CORE && SND_OMAP_SOC && ARCH_OMAP4 + depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4 select SND_OMAP_SOC_DMIC select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040 -- cgit v1.2.3-70-g09d2 From 82ea267f7dc853a5e6a724916a70a10656efdfc2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 16 Apr 2012 21:24:32 +0200 Subject: mfd: Fix modular builds of rc5t583 regulator support The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957 "mfd: Add support for RICOH PMIC RC5T583" and commit 6ffc3270210efa2bea526953a142ffc908f5bd86 "regulator: Add support for RICOH PMIC RC5T583 regulator" are causing the i386 allmodconfig builds to fail with this: ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined! and this: ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined! For the 1st four, make the simple ops static inline, instead of polluting the namespace with trivial exports. For the last one, add an EXPORT_SYMBOL. Signed-off-by: Paul Gortmaker Signed-off-by: Samuel Ortiz --- drivers/mfd/rc5t583.c | 39 +------------------------------------ include/linux/mfd/rc5t583.h | 47 +++++++++++++++++++++++++++++++++++++-------- 2 files changed, 40 insertions(+), 46 deletions(-) (limited to 'include') diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 99ef944c621..44afae0a69c 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -80,44 +80,6 @@ static struct mfd_cell rc5t583_subdevs[] = { {.name = "rc5t583-key", } }; -int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_write(rc5t583->regmap, reg, val); -} - -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - unsigned int ival; - int ret; - ret = regmap_read(rc5t583->regmap, reg, &ival); - if (!ret) - *val = (uint8_t)ival; - return ret; -} - -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); -} - -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); -} - -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, mask, val); -} - static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, int id, int ext_pwr, int slots) { @@ -197,6 +159,7 @@ int rc5t583_ext_power_req_config(struct device *dev, int ds_id, ds_id, ext_pwr_req); return 0; } +EXPORT_SYMBOL(rc5t583_ext_power_req_config); static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, struct rc5t583_platform_data *pdata) diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index a2c61609d21..0b64b19d81a 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -26,6 +26,7 @@ #include #include +#include #define RC5T583_MAX_REGS 0xF8 @@ -279,14 +280,44 @@ struct rc5t583_platform_data { bool enable_shutdown; }; -int rc5t583_write(struct device *dev, u8 reg, uint8_t val); -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask); -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask); -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask); +static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +static inline int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +static inline int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, int ext_pwr_req, int deepsleep_slot_nr); int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); -- cgit v1.2.3-70-g09d2