From a5262dcfda9163ca1f8a64349a6f7ba640ac1dc2 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 May 2007 19:36:41 -0700 Subject: USB: export as Make sure gadgetfs userspace interface is properly exported: - Move to ; - Export it using Kbuild; - Add an #include guard; - Correct some internal documentation; - Update struct layout so it's the same on 32/64 bit kernels. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/Kbuild | 1 + include/linux/usb/gadgetfs.h | 81 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/usb_gadgetfs.h | 75 ---------------------------------------- 3 files changed, 82 insertions(+), 75 deletions(-) create mode 100644 include/linux/usb/gadgetfs.h delete mode 100644 include/linux/usb_gadgetfs.h (limited to 'include') diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index 43f160cfe00..6ce42bf9f74 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -1,5 +1,6 @@ unifdef-y += audio.h unifdef-y += cdc.h unifdef-y += ch9.h +unifdef-y += gadgetfs.h unifdef-y += midi.h diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h new file mode 100644 index 00000000000..e8654c33872 --- /dev/null +++ b/include/linux/usb/gadgetfs.h @@ -0,0 +1,81 @@ +#ifndef __LINUX_USB_GADGETFS_H +#define __LINUX_USB_GADGETFS_H + +#include +#include + +#include + +/* + * Filesystem based user-mode API to USB Gadget controller hardware + * + * Other than ep0 operations, most things are done by read() and write() + * on endpoint files found in one directory. They are configured by + * writing descriptors, and then may be used for normal stream style + * i/o requests. When ep0 is configured, the device can enumerate; + * when it's closed, the device disconnects from usb. Operations on + * ep0 require ioctl() operations. + * + * Configuration and device descriptors get written to /dev/gadget/$CHIP, + * which may then be used to read usb_gadgetfs_event structs. The driver + * may activate endpoints as it handles SET_CONFIGURATION setup events, + * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT + * then performing data transfers by reading or writing. + */ + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_gadgetfs_event_type { + GADGETFS_NOP = 0, + + GADGETFS_CONNECT, + GADGETFS_DISCONNECT, + GADGETFS_SETUP, + GADGETFS_SUSPEND, + // and likely more ! +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_gadgetfs_event { + union { + // NOP, DISCONNECT, SUSPEND: nothing + // ... some hardware can't report disconnection + + // CONNECT: just the speed + enum usb_device_speed speed; + + // SETUP: packet; DATA phase i/o precedes next event + // (setup.bmRequestType & USB_DIR_IN) flags direction + // ... includes SET_CONFIGURATION, SET_INTERFACE + struct usb_ctrlrequest setup; + } u; + enum usb_gadgetfs_event_type type; +}; + + +/* endpoint ioctls */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define GADGETFS_FIFO_STATUS _IO('g',1) + +/* discards any unclaimed data in the fifo. */ +#define GADGETFS_FIFO_FLUSH _IO('g',2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define GADGETFS_CLEAR_HALT _IO('g',3) + +#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/linux/usb_gadgetfs.h b/include/linux/usb_gadgetfs.h deleted file mode 100644 index 8086d5a9b94..00000000000 --- a/include/linux/usb_gadgetfs.h +++ /dev/null @@ -1,75 +0,0 @@ - -#include -#include - -#include - -/* - * Filesystem based user-mode API to USB Gadget controller hardware - * - * Almost everything can be done with only read and write operations, - * on endpoint files found in one directory. They are configured by - * writing descriptors, and then may be used for normal stream style - * i/o requests. When ep0 is configured, the device can enumerate; - * when it's closed, the device disconnects from usb. - * - * Configuration and device descriptors get written to /dev/gadget/$CHIP, - * which may then be used to read usb_gadgetfs_event structs. The driver - * may activate endpoints as it handles SET_CONFIGURATION setup events, - * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT - * then performing data transfers by reading or writing. - */ - -/* - * Events are delivered on the ep0 file descriptor, if the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor, if you write that kind of driver. - */ - -enum usb_gadgetfs_event_type { - GADGETFS_NOP = 0, - - GADGETFS_CONNECT, - GADGETFS_DISCONNECT, - GADGETFS_SETUP, - GADGETFS_SUSPEND, - // and likely more ! -}; - -struct usb_gadgetfs_event { - enum usb_gadgetfs_event_type type; - union { - // NOP, DISCONNECT, SUSPEND: nothing - // ... some hardware can't report disconnection - - // CONNECT: just the speed - enum usb_device_speed speed; - - // SETUP: packet; DATA phase i/o precedes next event - // (setup.bmRequestType & USB_DIR_IN) flags direction - // ... includes SET_CONFIGURATION, SET_INTERFACE - struct usb_ctrlrequest setup; - } u; -}; - - -/* endpoint ioctls */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define GADGETFS_FIFO_STATUS _IO('g',1) - -/* discards any unclaimed data in the fifo. */ -#define GADGETFS_FIFO_FLUSH _IO('g',2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define GADGETFS_CLEAR_HALT _IO('g',3) - - -- cgit v1.2.3-70-g09d2