From 5a668651bf0da3891c46ea2cfcac227ded783a5a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 18:42:46 +0900 Subject: sh: Split out PXSEG segmentation per-CPU family. The CPU family abstraction already exists, so move out the PXSEG definition for each one. SH-2A already has this special cased, and SH-5 will as well. Signed-off-by: Paul Mundt --- include/asm-sh/addrspace.h | 31 +++++++++++++------------------ include/asm-sh/cpu-sh2/addrspace.h | 7 +++++-- include/asm-sh/cpu-sh2a/addrspace.h | 11 ++++++++++- include/asm-sh/cpu-sh3/addrspace.h | 7 +++++-- include/asm-sh/cpu-sh4/addrspace.h | 6 ++++++ 5 files changed, 39 insertions(+), 23 deletions(-) (limited to 'include') diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h index b860218e402..cb9da9992fa 100644 --- a/include/asm-sh/addrspace.h +++ b/include/asm-sh/addrspace.h @@ -9,24 +9,13 @@ */ #ifndef __ASM_SH_ADDRSPACE_H #define __ASM_SH_ADDRSPACE_H + #ifdef __KERNEL__ #include -/* Memory segments (32bit Privileged mode addresses) */ -#ifndef CONFIG_CPU_SH2A -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 -#else -#define P0SEG 0x00000000 -#define P1SEG 0x00000000 -#define P2SEG 0x20000000 -#define P3SEG 0x00000000 -#define P4SEG 0x80000000 -#endif +/* If this CPU supports segmentation, hook up the helpers */ +#ifdef P1SEG /* Returns the privileged segment base of a given address */ #define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) @@ -37,10 +26,16 @@ /* * Map an address to a certain privileged segment */ -#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) -#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) -#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) -#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) +#define P1SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) +#define P2SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) +#define P3SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) +#define P4SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) + +#endif /* P1SEG */ #endif /* __KERNEL__ */ #endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/include/asm-sh/cpu-sh2/addrspace.h index 8706c903c5a..2b9ab93efa4 100644 --- a/include/asm-sh/cpu-sh2/addrspace.h +++ b/include/asm-sh/cpu-sh2/addrspace.h @@ -10,7 +10,10 @@ #ifndef __ASM_CPU_SH2_ADDRSPACE_H #define __ASM_CPU_SH2_ADDRSPACE_H -/* Should fill here */ +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 #endif /* __ASM_CPU_SH2_ADDRSPACE_H */ - diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/include/asm-sh/cpu-sh2a/addrspace.h index 3d2e9aa2152..795ddd6856a 100644 --- a/include/asm-sh/cpu-sh2a/addrspace.h +++ b/include/asm-sh/cpu-sh2a/addrspace.h @@ -1 +1,10 @@ -#include +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x00000000 +#define P4SEG 0x80000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/include/asm-sh/cpu-sh3/addrspace.h index 872e9e1b548..0f94726c7d6 100644 --- a/include/asm-sh/cpu-sh3/addrspace.h +++ b/include/asm-sh/cpu-sh3/addrspace.h @@ -10,7 +10,10 @@ #ifndef __ASM_CPU_SH3_ADDRSPACE_H #define __ASM_CPU_SH3_ADDRSPACE_H -/* Should fill here */ +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 #endif /* __ASM_CPU_SH3_ADDRSPACE_H */ - diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h index bb2e1b03060..a3fa733c1c7 100644 --- a/include/asm-sh/cpu-sh4/addrspace.h +++ b/include/asm-sh/cpu-sh4/addrspace.h @@ -10,6 +10,12 @@ #ifndef __ASM_CPU_SH4_ADDRSPACE_H #define __ASM_CPU_SH4_ADDRSPACE_H +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + /* Detailed P4SEG */ #define P4SEG_STORE_QUE (P4SEG) #define P4SEG_IC_ADDR 0xf0000000 -- cgit v1.2.3-70-g09d2 From 8d5fb297cc8f9f7de2840864e497bc38330abba6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 18:44:09 +0900 Subject: sh: Split out cache status bits per-CPU family. Signed-off-by: Paul Mundt --- include/asm-sh/cache.h | 5 ----- include/asm-sh/cpu-sh2/cache.h | 5 +++++ include/asm-sh/cpu-sh2a/cache.h | 5 +++++ include/asm-sh/cpu-sh3/cache.h | 5 +++++ include/asm-sh/cpu-sh4/cache.h | 5 +++++ 5 files changed, 20 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h index 01e5cf51ba9..083419f47c6 100644 --- a/include/asm-sh/cache.h +++ b/include/asm-sh/cache.h @@ -12,11 +12,6 @@ #include #include -#define SH_CACHE_VALID 1 -#define SH_CACHE_UPDATED 2 -#define SH_CACHE_COMBINED 4 -#define SH_CACHE_ASSOC 8 - #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define __read_mostly __attribute__((__section__(".data.read_mostly"))) diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h index f02ba7a672b..66388ce16c3 100644 --- a/include/asm-sh/cpu-sh2/cache.h +++ b/include/asm-sh/cpu-sh2/cache.h @@ -12,6 +12,11 @@ #define L1_CACHE_SHIFT 4 +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + #if defined(CONFIG_CPU_SUBTYPE_SH7619) #define CCR1 0xffffffec #define CCR CCR1 diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h index 3e4b9e48098..d88774169b5 100644 --- a/include/asm-sh/cpu-sh2a/cache.h +++ b/include/asm-sh/cpu-sh2a/cache.h @@ -12,6 +12,11 @@ #define L1_CACHE_SHIFT 4 +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + #define CCR1 0xfffc1000 #define CCR2 0xfffc1004 diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h index 255016fc91f..77dd45d8241 100644 --- a/include/asm-sh/cpu-sh3/cache.h +++ b/include/asm-sh/cpu-sh3/cache.h @@ -12,6 +12,11 @@ #define L1_CACHE_SHIFT 4 +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + #define CCR 0xffffffec /* Address of Cache Control Register */ #define CCR_CACHE_CE 0x01 /* Cache Enable */ diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h index f92b20a0983..1c61ebf5c8e 100644 --- a/include/asm-sh/cpu-sh4/cache.h +++ b/include/asm-sh/cpu-sh4/cache.h @@ -12,6 +12,11 @@ #define L1_CACHE_SHIFT 5 +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + #define CCR 0xff00001c /* Address of Cache Control Register */ #define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */ #define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/ -- cgit v1.2.3-70-g09d2 From 34cd6d3ab47284dbebea03585ead6a0d5671b75c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 18:54:58 +0900 Subject: sh: Add SH-5 support to asm/module.h. Signed-off-by: Paul Mundt --- include/asm-sh/module.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-sh/module.h b/include/asm-sh/module.h index 118d5a2b228..46eccd33166 100644 --- a/include/asm-sh/module.h +++ b/include/asm-sh/module.h @@ -20,6 +20,8 @@ struct mod_arch_specific { # define MODULE_PROC_FAMILY "SH3LE " # elif defined CONFIG_CPU_SH4 # define MODULE_PROC_FAMILY "SH4LE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5LE " # else # error unknown processor family # endif @@ -30,6 +32,8 @@ struct mod_arch_specific { # define MODULE_PROC_FAMILY "SH3BE " # elif defined CONFIG_CPU_SH4 # define MODULE_PROC_FAMILY "SH4BE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5BE " # else # error unknown processor family # endif -- cgit v1.2.3-70-g09d2 From 5a4a5bd127c147aaa16aefef856f4cb28e92cec1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 18:55:39 +0900 Subject: sh: Fix up fixmap location for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/fixmap.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h index 8a566177ad9..09463cd9bbb 100644 --- a/include/asm-sh/fixmap.h +++ b/include/asm-sh/fixmap.h @@ -73,7 +73,11 @@ extern void __set_fixmap(enum fixed_addresses idx, * the start of the fixmap, and leave one page empty * at the top of mem.. */ +#ifdef CONFIG_SUPERH32 #define FIXADDR_TOP (P4SEG - PAGE_SIZE) +#else +#define FIXADDR_TOP (0xff000000 - PAGE_SIZE) +#endif #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) -- cgit v1.2.3-70-g09d2 From e1cd93ea44cb55969e122758c8cc2ddfe21b74b3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 18:58:00 +0900 Subject: sh: BUGFLAG_WARNING needs GENERIC_BUG. Move the HAVE_ARCH_BUG/HAVE_ARCH_WARN_ON definitions underneath CONFIG_GENERIC_BUG. This is needed for BUGFLAG_WARNING usage. Signed-off-by: Paul Mundt --- include/asm-sh/bug.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h index a78d482e8b2..afb1c2723ec 100644 --- a/include/asm-sh/bug.h +++ b/include/asm-sh/bug.h @@ -3,7 +3,7 @@ #define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ -#ifdef CONFIG_BUG +#ifdef CONFIG_GENERIC_BUG #define HAVE_ARCH_BUG #define HAVE_ARCH_WARN_ON @@ -77,7 +77,7 @@ struct pt_regs; /* arch/sh/kernel/traps.c */ void handle_BUG(struct pt_regs *); -#endif /* CONFIG_BUG */ +#endif /* CONFIG_GENERIC_BUG */ #include -- cgit v1.2.3-70-g09d2 From a096a7e4762f685364df5ca03394eb63bbdb93df Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 18:58:52 +0900 Subject: sh: Add addrspace.h segmentation stub for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/addrspace.h | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 include/asm-sh/cpu-sh5/addrspace.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/include/asm-sh/cpu-sh5/addrspace.h new file mode 100644 index 00000000000..844c5210e8e --- /dev/null +++ b/include/asm-sh/cpu-sh5/addrspace.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H +#define __ASM_SH_CPU_SH5_ADDRSPACE_H + +/* No segmentation.. */ + +#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */ -- cgit v1.2.3-70-g09d2 From d752542ade337f059d12c59c4bc9c312befa1f1e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Nov 2007 19:00:27 +0900 Subject: sh: Add cache definitions for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/cache.h | 94 ++++++++++++++++++++++++++++ include/asm-sh64/cache.h | 139 ----------------------------------------- 2 files changed, 94 insertions(+), 139 deletions(-) create mode 100644 include/asm-sh/cpu-sh5/cache.h delete mode 100644 include/asm-sh64/cache.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/cache.h b/include/asm-sh/cpu-sh5/cache.h new file mode 100644 index 00000000000..2d1f9c28b92 --- /dev/null +++ b/include/asm-sh/cpu-sh5/cache.h @@ -0,0 +1,94 @@ +#ifndef __ASM_SH64_CACHE_H +#define __ASM_SH64_CACHE_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/cache.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + */ + +#define L1_CACHE_SHIFT 5 + +/* Valid and Dirty bits */ +#define SH_CACHE_VALID (1LL<<0) +#define SH_CACHE_UPDATED (1LL<<57) + +/* Cache flags */ +#define SH_CACHE_MODE_WT (1LL<<0) +#define SH_CACHE_MODE_WB (1LL<<1) + +/* + * Control Registers. + */ +#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */ +#define ICCR_REG0 0 /* Register 0 offset */ +#define ICCR_REG1 1 /* Register 1 offset */ +#define ICCR0 ICCR_BASE+ICCR_REG0 +#define ICCR1 ICCR_BASE+ICCR_REG1 + +#define ICCR0_OFF 0x0 /* Set ICACHE off */ +#define ICCR0_ON 0x1 /* Set ICACHE on */ +#define ICCR0_ICI 0x2 /* Invalidate all in IC */ + +#define ICCR1_NOLOCK 0x0 /* Set No Locking */ + +#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */ +#define OCCR_REG0 0 /* Register 0 offset */ +#define OCCR_REG1 1 /* Register 1 offset */ +#define OCCR0 OCCR_BASE+OCCR_REG0 +#define OCCR1 OCCR_BASE+OCCR_REG1 + +#define OCCR0_OFF 0x0 /* Set OCACHE off */ +#define OCCR0_ON 0x1 /* Set OCACHE on */ +#define OCCR0_OCI 0x2 /* Invalidate all in OC */ +#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */ +#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */ + +#define OCCR1_NOLOCK 0x0 /* Set No Locking */ + +/* + * SH-5 + * A bit of description here, for neff=32. + * + * |<--- tag (19 bits) --->| + * +-----------------------------+-----------------+------+----------+------+ + * | | | ways |set index |offset| + * +-----------------------------+-----------------+------+----------+------+ + * ^ 2 bits 8 bits 5 bits + * +- Bit 31 + * + * Cacheline size is based on offset: 5 bits = 32 bytes per line + * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG + * have a broader space for registers. These are outlined by + * CACHE_?C_*_STEP below. + * + */ + +/* Instruction cache */ +#define CACHE_IC_ADDRESS_ARRAY 0x01000000 + +/* Operand Cache */ +#define CACHE_OC_ADDRESS_ARRAY 0x01800000 + +/* These declarations relate to cache 'synonyms' in the operand cache. A + 'synonym' occurs where effective address bits overlap between those used for + indexing the cache sets and those passed to the MMU for translation. In the + case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ + +#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ +#define CACHE_OC_SYN_SHIFT 12 +/* Mask to select synonym bit(s) */ +#define CACHE_OC_SYN_MASK (((1UL< - -#define L1_CACHE_SHIFT 5 -/* bytes per L1 cache line */ -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) -#define L1_CACHE_ALIGN_MASK (~(L1_CACHE_BYTES - 1)) -#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES - 1)) & L1_CACHE_ALIGN_MASK) -#define L1_CACHE_SIZE_BYTES (L1_CACHE_BYTES << 10) - -#ifdef MODULE -#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES))) -#else -#define __cacheline_aligned \ - __attribute__((__aligned__(L1_CACHE_BYTES), \ - __section__(".data.cacheline_aligned"))) -#endif - -/* - * Control Registers. - */ -#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */ -#define ICCR_REG0 0 /* Register 0 offset */ -#define ICCR_REG1 1 /* Register 1 offset */ -#define ICCR0 ICCR_BASE+ICCR_REG0 -#define ICCR1 ICCR_BASE+ICCR_REG1 - -#define ICCR0_OFF 0x0 /* Set ICACHE off */ -#define ICCR0_ON 0x1 /* Set ICACHE on */ -#define ICCR0_ICI 0x2 /* Invalidate all in IC */ - -#define ICCR1_NOLOCK 0x0 /* Set No Locking */ - -#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */ -#define OCCR_REG0 0 /* Register 0 offset */ -#define OCCR_REG1 1 /* Register 1 offset */ -#define OCCR0 OCCR_BASE+OCCR_REG0 -#define OCCR1 OCCR_BASE+OCCR_REG1 - -#define OCCR0_OFF 0x0 /* Set OCACHE off */ -#define OCCR0_ON 0x1 /* Set OCACHE on */ -#define OCCR0_OCI 0x2 /* Invalidate all in OC */ -#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */ -#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */ - -#define OCCR1_NOLOCK 0x0 /* Set No Locking */ - - -/* - * SH-5 - * A bit of description here, for neff=32. - * - * |<--- tag (19 bits) --->| - * +-----------------------------+-----------------+------+----------+------+ - * | | | ways |set index |offset| - * +-----------------------------+-----------------+------+----------+------+ - * ^ 2 bits 8 bits 5 bits - * +- Bit 31 - * - * Cacheline size is based on offset: 5 bits = 32 bytes per line - * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG - * have a broader space for registers. These are outlined by - * CACHE_?C_*_STEP below. - * - */ - -/* Valid and Dirty bits */ -#define SH_CACHE_VALID (1LL<<0) -#define SH_CACHE_UPDATED (1LL<<57) - -/* Cache flags */ -#define SH_CACHE_MODE_WT (1LL<<0) -#define SH_CACHE_MODE_WB (1LL<<1) - -#ifndef __ASSEMBLY__ - -/* - * Cache information structure. - * - * Defined for both I and D cache, per-processor. - */ -struct cache_info { - unsigned int ways; - unsigned int sets; - unsigned int linesz; - - unsigned int way_shift; - unsigned int entry_shift; - unsigned int set_shift; - unsigned int way_step_shift; - unsigned int asid_shift; - - unsigned int way_ofs; - - unsigned int asid_mask; - unsigned int idx_mask; - unsigned int epn_mask; - - unsigned long flags; -}; - -#endif /* __ASSEMBLY__ */ - -/* Instruction cache */ -#define CACHE_IC_ADDRESS_ARRAY 0x01000000 - -/* Operand Cache */ -#define CACHE_OC_ADDRESS_ARRAY 0x01800000 - -/* These declarations relate to cache 'synonyms' in the operand cache. A - 'synonym' occurs where effective address bits overlap between those used for - indexing the cache sets and those passed to the MMU for translation. In the - case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ - -#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ -#define CACHE_OC_SYN_SHIFT 12 -/* Mask to select synonym bit(s) */ -#define CACHE_OC_SYN_MASK (((1UL< Date: Thu, 8 Nov 2007 19:08:28 +0900 Subject: sh: Correct SH-5 instruction size value. Signed-off-by: Paul Mundt --- include/asm-sh/system.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 4faa2fb8861..288abeb5476 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -255,8 +255,10 @@ static inline void *set_exception_table_evt(unsigned int evt, void *handler) */ #ifdef CONFIG_CPU_SH2A extern unsigned int instruction_size(unsigned int insn); -#else +#elif defined(CONFIG_SUPERH32) #define instruction_size(insn) (2) +#else +#define instruction_size(insn) (4) #endif /* XXX -- cgit v1.2.3-70-g09d2 From 3b9e78868d000ca10b740c465df9236b04d29718 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 12:56:06 +0900 Subject: sh: Add in cacheflush and DMA headers for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/cacheflush.h | 34 +++++++++++++++++++++++++ include/asm-sh/cpu-sh5/dma.h | 6 +++++ include/asm-sh64/cacheflush.h | 50 ------------------------------------- 3 files changed, 40 insertions(+), 50 deletions(-) create mode 100644 include/asm-sh/cpu-sh5/cacheflush.h create mode 100644 include/asm-sh/cpu-sh5/dma.h delete mode 100644 include/asm-sh64/cacheflush.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/include/asm-sh/cpu-sh5/cacheflush.h new file mode 100644 index 00000000000..847374b6526 --- /dev/null +++ b/include/asm-sh/cpu-sh5/cacheflush.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH64_CACHEFLUSH_H +#define __ASM_SH64_CACHEFLUSH_H + +#ifndef __ASSEMBLY__ + +#include + +struct vm_area_struct; +struct page; +struct mm_struct; + +extern void flush_cache_all(void); +extern void flush_cache_mm(struct mm_struct *mm); +extern void flush_cache_sigtramp(unsigned long start, unsigned long end); +extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +extern void flush_dcache_page(struct page *pg); +extern void flush_icache_range(unsigned long start, unsigned long end); +extern void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, + int len); + +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_icache_page(vma, page) do { } while (0) + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH64_CACHEFLUSH_H */ + diff --git a/include/asm-sh/cpu-sh5/dma.h b/include/asm-sh/cpu-sh5/dma.h new file mode 100644 index 00000000000..7bf6bb3d35e --- /dev/null +++ b/include/asm-sh/cpu-sh5/dma.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_CPU_SH5_DMA_H +#define __ASM_SH_CPU_SH5_DMA_H + +/* Nothing yet */ + +#endif /* __ASM_SH_CPU_SH5_DMA_H */ diff --git a/include/asm-sh64/cacheflush.h b/include/asm-sh64/cacheflush.h deleted file mode 100644 index 1e53a47bdc9..00000000000 --- a/include/asm-sh64/cacheflush.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef __ASM_SH64_CACHEFLUSH_H -#define __ASM_SH64_CACHEFLUSH_H - -#ifndef __ASSEMBLY__ - -#include - -struct vm_area_struct; -struct page; -struct mm_struct; - -extern void flush_cache_all(void); -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_sigtramp(unsigned long start, unsigned long end); -extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); -extern void flush_dcache_page(struct page *pg); -extern void flush_icache_range(unsigned long start, unsigned long end); -extern void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long addr, - int len); - -#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -#define flush_icache_page(vma, page) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ - } while (0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - } while (0) - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_SH64_CACHEFLUSH_H */ - -- cgit v1.2.3-70-g09d2 From da06b8d0545a1bf95b9060bf301d6de3400fafd6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 12:58:12 +0900 Subject: sh: Add SH-5 support to io.h. Signed-off-by: Paul Mundt --- include/asm-sh/io.h | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 6ed34d8eac5..556aabe844c 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -243,12 +243,20 @@ static inline void ctrl_outl(unsigned int b, unsigned long addr) static inline void ctrl_delay(void) { +#ifdef P2SEG ctrl_inw(P2SEG); +#endif } #define IO_SPACE_LIMIT 0xffffffff -#ifdef CONFIG_MMU +#if !defined(CONFIG_MMU) +#define virt_to_phys(address) ((unsigned long)(address)) +#define phys_to_virt(address) ((void *)(address)) +#elif defined(CONFIG_SUPERH64) +#define virt_to_phys(address) (__pa(address)) +#define phys_to_virt(address) (__va(address)) +#else /* * Change virtual addresses to physical addresses and vv. * These are trivial on the 1:1 Linux/SuperH mapping @@ -262,28 +270,24 @@ static inline void *phys_to_virt(unsigned long address) { return (void *)P1SEGADDR(address); } -#else -#define phys_to_virt(address) ((void *)(address)) -#define virt_to_phys(address) ((unsigned long)(address)) #endif /* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. + * On 32-bit SH, we traditionally have the whole physical address space + * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do + * not need to do anything but place the address in the proper segment. + * This is true for P1 and P2 addresses, as well as some P3 ones. + * However, most of the P3 addresses and newer cores using extended + * addressing need to map through page tables, so the ioremap() + * implementation becomes a bit more complicated. * - * On SH, we traditionally have the whole physical address space mapped - * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not - * need to do anything but place the address in the proper segment. This - * is true for P1 and P2 addresses, as well as some P3 ones. However, - * most of the P3 addresses and newer cores using extended addressing - * need to map through page tables, so the ioremap() implementation - * becomes a bit more complicated. See arch/sh/mm/ioremap.c for - * additional notes on this. + * See arch/sh/mm/ioremap.c for additional notes on this. * * We cheat a bit and always return uncachable areas until we've fixed * the drivers to handle caching properly. + * + * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply + * doesn't exist, so everything must go through page tables. */ #ifdef CONFIG_MMU void __iomem *__ioremap(unsigned long offset, unsigned long size, @@ -297,6 +301,7 @@ void __iounmap(void __iomem *addr); static inline void __iomem * __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) { +#ifdef CONFIG_SUPERH32 unsigned long last_addr = offset + size - 1; /* @@ -311,6 +316,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) return (void __iomem *)P2SEGADDR(offset); } +#endif return __ioremap(offset, size, flags); } -- cgit v1.2.3-70-g09d2 From 7960a1d02b00fd5dfa5c2d9b957e4e5f6ec23997 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 13:00:30 +0900 Subject: sh: Split out asm/string.h for sh32 and sh64. Signed-off-by: Paul Mundt --- include/asm-sh/string.h | 136 ++------------------------------------------- include/asm-sh/string_32.h | 131 +++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/string_64.h | 21 +++++++ include/asm-sh64/string.h | 21 ------- 4 files changed, 157 insertions(+), 152 deletions(-) create mode 100644 include/asm-sh/string_32.h create mode 100644 include/asm-sh/string_64.h delete mode 100644 include/asm-sh64/string.h (limited to 'include') diff --git a/include/asm-sh/string.h b/include/asm-sh/string.h index 55f8db6bc1d..8c1ea21dc0a 100644 --- a/include/asm-sh/string.h +++ b/include/asm-sh/string.h @@ -1,131 +1,5 @@ -#ifndef __ASM_SH_STRING_H -#define __ASM_SH_STRING_H - -#ifdef __KERNEL__ - -/* - * Copyright (C) 1999 Niibe Yutaka - * But consider these trivial functions to be public domain. - */ - -#define __HAVE_ARCH_STRCPY -static inline char *strcpy(char *__dest, const char *__src) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - __asm__ __volatile__("1:\n\t" - "mov.b @%1+, %2\n\t" - "mov.b %2, @%0\n\t" - "cmp/eq #0, %2\n\t" - "bf/s 1b\n\t" - " add #1, %0\n\t" - : "=r" (__dest), "=r" (__src), "=&z" (__dummy) - : "0" (__dest), "1" (__src) - : "memory", "t"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static inline char *strncpy(char *__dest, const char *__src, size_t __n) -{ - register char *__xdest = __dest; - unsigned long __dummy; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - "1:\n" - "mov.b @%1+, %2\n\t" - "mov.b %2, @%0\n\t" - "cmp/eq #0, %2\n\t" - "bt/s 2f\n\t" - " cmp/eq %5,%1\n\t" - "bf/s 1b\n\t" - " add #1, %0\n" - "2:" - : "=r" (__dest), "=r" (__src), "=&z" (__dummy) - : "0" (__dest), "1" (__src), "r" (__src+__n) - : "memory", "t"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static inline int strcmp(const char *__cs, const char *__ct) -{ - register int __res; - unsigned long __dummy; - - __asm__ __volatile__( - "mov.b @%1+, %3\n" - "1:\n\t" - "mov.b @%0+, %2\n\t" - "cmp/eq #0, %3\n\t" - "bt 2f\n\t" - "cmp/eq %2, %3\n\t" - "bt/s 1b\n\t" - " mov.b @%1+, %3\n\t" - "add #-2, %1\n\t" - "mov.b @%1, %3\n\t" - "sub %3, %2\n" - "2:" - : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) - : "0" (__cs), "1" (__ct) - : "t"); - - return __res; -} - -#define __HAVE_ARCH_STRNCMP -static inline int strncmp(const char *__cs, const char *__ct, size_t __n) -{ - register int __res; - unsigned long __dummy; - - if (__n == 0) - return 0; - - __asm__ __volatile__( - "mov.b @%1+, %3\n" - "1:\n\t" - "mov.b @%0+, %2\n\t" - "cmp/eq %6, %0\n\t" - "bt/s 2f\n\t" - " cmp/eq #0, %3\n\t" - "bt/s 3f\n\t" - " cmp/eq %3, %2\n\t" - "bt/s 1b\n\t" - " mov.b @%1+, %3\n\t" - "add #-2, %1\n\t" - "mov.b @%1, %3\n" - "2:\n\t" - "sub %3, %2\n" - "3:" - :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) - : "0" (__cs), "1" (__ct), "r" (__cs+__n) - : "t"); - - return __res; -} - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *__to, __const__ void *__from, size_t __n); - -#define __HAVE_ARCH_MEMMOVE -extern void *memmove(void *__dest, __const__ void *__src, size_t __n); - -#define __HAVE_ARCH_MEMCHR -extern void *memchr(const void *__s, int __c, size_t __n); - -#define __HAVE_ARCH_STRLEN -extern size_t strlen(const char *); - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_STRING_H */ +#ifdef CONFIG_SUPERH32 +# include "string_32.h" +#else +# include "string_64.h" +#endif diff --git a/include/asm-sh/string_32.h b/include/asm-sh/string_32.h new file mode 100644 index 00000000000..55f8db6bc1d --- /dev/null +++ b/include/asm-sh/string_32.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH_STRING_H +#define __ASM_SH_STRING_H + +#ifdef __KERNEL__ + +/* + * Copyright (C) 1999 Niibe Yutaka + * But consider these trivial functions to be public domain. + */ + +#define __HAVE_ARCH_STRCPY +static inline char *strcpy(char *__dest, const char *__src) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + __asm__ __volatile__("1:\n\t" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bf/s 1b\n\t" + " add #1, %0\n\t" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char *strncpy(char *__dest, const char *__src, size_t __n) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + "1:\n" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bt/s 2f\n\t" + " cmp/eq %5,%1\n\t" + "bf/s 1b\n\t" + " add #1, %0\n" + "2:" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src), "r" (__src+__n) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char *__cs, const char *__ct) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq #0, %3\n\t" + "bt 2f\n\t" + "cmp/eq %2, %3\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n\t" + "sub %3, %2\n" + "2:" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char *__cs, const char *__ct, size_t __n) +{ + register int __res; + unsigned long __dummy; + + if (__n == 0) + return 0; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq %6, %0\n\t" + "bt/s 2f\n\t" + " cmp/eq #0, %3\n\t" + "bt/s 3f\n\t" + " cmp/eq %3, %2\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n" + "2:\n\t" + "sub %3, %2\n" + "3:" + :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct), "r" (__cs+__n) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *__s, int __c, size_t __n); + +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char *); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_STRING_H */ diff --git a/include/asm-sh/string_64.h b/include/asm-sh/string_64.h new file mode 100644 index 00000000000..8a7357366ce --- /dev/null +++ b/include/asm-sh/string_64.h @@ -0,0 +1,21 @@ +#ifndef __ASM_SH64_STRING_H +#define __ASM_SH64_STRING_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/string.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * Empty on purpose. ARCH SH64 ASM libs are out of the current project scope. + * + */ + +#define __HAVE_ARCH_MEMCPY + +extern void *memcpy(void *dest, const void *src, size_t count); + +#endif diff --git a/include/asm-sh64/string.h b/include/asm-sh64/string.h deleted file mode 100644 index 8a7357366ce..00000000000 --- a/include/asm-sh64/string.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ASM_SH64_STRING_H -#define __ASM_SH64_STRING_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/string.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * Empty on purpose. ARCH SH64 ASM libs are out of the current project scope. - * - */ - -#define __HAVE_ARCH_MEMCPY - -extern void *memcpy(void *dest, const void *src, size_t count); - -#endif -- cgit v1.2.3-70-g09d2 From f64ee87614e80ca270de0b80c5164ab05f4f1d98 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 13:34:36 +0900 Subject: sh: Split out irqflags.h in to _32 and _64 variants. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/registers.h | 106 +++++++++++++++++++++++++++++++++++++ include/asm-sh/irqflags.h | 97 ++------------------------------- include/asm-sh/irqflags_32.h | 99 ++++++++++++++++++++++++++++++++++ include/asm-sh/irqflags_64.h | 85 +++++++++++++++++++++++++++++ include/asm-sh64/registers.h | 106 ------------------------------------- 5 files changed, 294 insertions(+), 199 deletions(-) create mode 100644 include/asm-sh/cpu-sh5/registers.h create mode 100644 include/asm-sh/irqflags_32.h create mode 100644 include/asm-sh/irqflags_64.h delete mode 100644 include/asm-sh64/registers.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/registers.h b/include/asm-sh/cpu-sh5/registers.h new file mode 100644 index 00000000000..7eec666acf8 --- /dev/null +++ b/include/asm-sh/cpu-sh5/registers.h @@ -0,0 +1,106 @@ +#ifndef __ASM_SH64_REGISTERS_H +#define __ASM_SH64_REGISTERS_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/registers.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2004 Richard Curnow + */ + +#ifdef __ASSEMBLY__ +/* ===================================================================== +** +** Section 1: acts on assembly sources pre-processed by GPP ( ). +** Assigns symbolic names to control & target registers. +*/ + +/* + * Define some useful aliases for control registers. + */ +#define SR cr0 +#define SSR cr1 +#define PSSR cr2 + /* cr3 UNDEFINED */ +#define INTEVT cr4 +#define EXPEVT cr5 +#define PEXPEVT cr6 +#define TRA cr7 +#define SPC cr8 +#define PSPC cr9 +#define RESVEC cr10 +#define VBR cr11 + /* cr12 UNDEFINED */ +#define TEA cr13 + /* cr14-cr15 UNDEFINED */ +#define DCR cr16 +#define KCR0 cr17 +#define KCR1 cr18 + /* cr19-cr31 UNDEFINED */ + /* cr32-cr61 RESERVED */ +#define CTC cr62 +#define USR cr63 + +/* + * ABI dependent registers (general purpose set) + */ +#define RET r2 +#define ARG1 r2 +#define ARG2 r3 +#define ARG3 r4 +#define ARG4 r5 +#define ARG5 r6 +#define ARG6 r7 +#define SP r15 +#define LINK r18 +#define ZERO r63 + +/* + * Status register defines: used only by assembly sources (and + * syntax independednt) + */ +#define SR_RESET_VAL 0x0000000050008000 +#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ +#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ + +#if defined (CONFIG_SH64_SR_WATCH) +#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ +#else +#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ +#endif + +#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ +#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ + +#else /* Not __ASSEMBLY__ syntax */ + +/* +** Stringify reg. name +*/ +#define __str(x) #x + +/* Stringify control register names for use in inline assembly */ +#define __SR __str(SR) +#define __SSR __str(SSR) +#define __PSSR __str(PSSR) +#define __INTEVT __str(INTEVT) +#define __EXPEVT __str(EXPEVT) +#define __PEXPEVT __str(PEXPEVT) +#define __TRA __str(TRA) +#define __SPC __str(SPC) +#define __PSPC __str(PSPC) +#define __RESVEC __str(RESVEC) +#define __VBR __str(VBR) +#define __TEA __str(TEA) +#define __DCR __str(DCR) +#define __KCR0 __str(KCR0) +#define __KCR1 __str(KCR1) +#define __CTC __str(CTC) +#define __USR __str(USR) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH64_REGISTERS_H */ diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h index 9dedc1b693e..46e71da5be6 100644 --- a/include/asm-sh/irqflags.h +++ b/include/asm-sh/irqflags.h @@ -1,81 +1,11 @@ #ifndef __ASM_SH_IRQFLAGS_H #define __ASM_SH_IRQFLAGS_H -static inline void raw_local_irq_enable(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %1, %0\n\t" -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r6_bank, %1\n\t" - "or %1, %0\n\t" +#ifdef CONFIG_SUPERH32 +#include "irqflags_32.h" +#else +#include "irqflags_64.h" #endif - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x000000f0) - : "memory" - ); -} - -static inline void raw_local_irq_disable(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); -} - -static inline void set_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "or %2, %0\n\t" - "and %3, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "r" (0x10000000), "r" (0xffffff0f) - : "memory" - ); -} - -static inline void clear_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %2, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x10000000) - : "memory" - ); -} - -static inline unsigned long __raw_local_save_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags) - : /* no inputs */ - : "memory" - ); - - return flags; -} #define raw_local_save_flags(flags) \ do { (flags) = __raw_local_save_flags(); } while (0) @@ -92,25 +22,6 @@ static inline int raw_irqs_disabled(void) return raw_irqs_disabled_flags(flags); } -static inline unsigned long __raw_local_irq_save(void) -{ - unsigned long flags, __dummy; - - __asm__ __volatile__ ( - "stc sr, %1\n\t" - "mov %1, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - "mov %1, %0\n\t" - "and #0xf0, %0\n\t" - : "=&z" (flags), "=&r" (__dummy) - : /* no inputs */ - : "memory" - ); - - return flags; -} - #define raw_local_irq_save(flags) \ do { (flags) = __raw_local_irq_save(); } while (0) diff --git a/include/asm-sh/irqflags_32.h b/include/asm-sh/irqflags_32.h new file mode 100644 index 00000000000..60218f54134 --- /dev/null +++ b/include/asm-sh/irqflags_32.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_IRQFLAGS_32_H +#define __ASM_SH_IRQFLAGS_32_H + +static inline void raw_local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); +} + +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags, __dummy; + + __asm__ __volatile__ ( + "stc sr, %1\n\t" + "mov %1, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + "mov %1, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags), "=&r" (__dummy) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/include/asm-sh/irqflags_64.h b/include/asm-sh/irqflags_64.h new file mode 100644 index 00000000000..4f6b8a56e7b --- /dev/null +++ b/include/asm-sh/irqflags_64.h @@ -0,0 +1,85 @@ +#ifndef __ASM_SH_IRQFLAGS_64_H +#define __ASM_SH_IRQFLAGS_64_H + +#include + +#define SR_MASK_LL 0x00000000000000f0LL +#define SR_BL_LL 0x0000000010000000LL + +static inline void raw_local_irq_enable(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void set_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); + +} + +static inline void clear_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long long __dummy = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "and %0, %1, %0" + : "=&r" (flags) + : "r" (__dummy)); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %1\n\t" + "or %1, r63, %0\n\t" + "or %1, %2, %1\n\t" + "putcon %1, " __SR "\n\t" + "and %0, %2, %0" + : "=&r" (flags), "=&r" (__dummy0) + : "r" (__dummy1)); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/include/asm-sh64/registers.h b/include/asm-sh64/registers.h deleted file mode 100644 index 7eec666acf8..00000000000 --- a/include/asm-sh64/registers.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef __ASM_SH64_REGISTERS_H -#define __ASM_SH64_REGISTERS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/registers.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 Richard Curnow - */ - -#ifdef __ASSEMBLY__ -/* ===================================================================== -** -** Section 1: acts on assembly sources pre-processed by GPP ( ). -** Assigns symbolic names to control & target registers. -*/ - -/* - * Define some useful aliases for control registers. - */ -#define SR cr0 -#define SSR cr1 -#define PSSR cr2 - /* cr3 UNDEFINED */ -#define INTEVT cr4 -#define EXPEVT cr5 -#define PEXPEVT cr6 -#define TRA cr7 -#define SPC cr8 -#define PSPC cr9 -#define RESVEC cr10 -#define VBR cr11 - /* cr12 UNDEFINED */ -#define TEA cr13 - /* cr14-cr15 UNDEFINED */ -#define DCR cr16 -#define KCR0 cr17 -#define KCR1 cr18 - /* cr19-cr31 UNDEFINED */ - /* cr32-cr61 RESERVED */ -#define CTC cr62 -#define USR cr63 - -/* - * ABI dependent registers (general purpose set) - */ -#define RET r2 -#define ARG1 r2 -#define ARG2 r3 -#define ARG3 r4 -#define ARG4 r5 -#define ARG5 r6 -#define ARG6 r7 -#define SP r15 -#define LINK r18 -#define ZERO r63 - -/* - * Status register defines: used only by assembly sources (and - * syntax independednt) - */ -#define SR_RESET_VAL 0x0000000050008000 -#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ -#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ - -#if defined (CONFIG_SH64_SR_WATCH) -#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ -#else -#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ -#endif - -#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ -#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ - -#else /* Not __ASSEMBLY__ syntax */ - -/* -** Stringify reg. name -*/ -#define __str(x) #x - -/* Stringify control register names for use in inline assembly */ -#define __SR __str(SR) -#define __SSR __str(SSR) -#define __PSSR __str(PSSR) -#define __INTEVT __str(INTEVT) -#define __EXPEVT __str(EXPEVT) -#define __PEXPEVT __str(PEXPEVT) -#define __TRA __str(TRA) -#define __SPC __str(SPC) -#define __PSPC __str(PSPC) -#define __RESVEC __str(RESVEC) -#define __VBR __str(VBR) -#define __TEA __str(TEA) -#define __DCR __str(DCR) -#define __KCR0 __str(KCR0) -#define __KCR1 __str(KCR1) -#define __CTC __str(CTC) -#define __USR __str(USR) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH64_REGISTERS_H */ -- cgit v1.2.3-70-g09d2 From 114f132975ae8db3caa0c3420dc1083bae8d3757 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 13:40:50 +0900 Subject: sh: SH-5 version of current_thread_info(). Signed-off-by: Paul Mundt --- include/asm-sh/thread_info.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 1f7e1deb8d9..d49ee9d868e 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -74,8 +74,10 @@ register unsigned long current_stack_pointer asm("r15") __attribute_used__; static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; -#ifdef CONFIG_CPU_HAS_SR_RB - __asm__("stc r7_bank, %0" : "=r" (ti)); +#if defined(CONFIG_SUPERH64) + __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); +#elif defined(CONFIG_CPU_HAS_SR_RB) + __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); #else unsigned long __dummy; -- cgit v1.2.3-70-g09d2 From 7a65eaf4885d1d0afeec45239eaf9208a3235b51 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 13:58:44 +0900 Subject: sh: SH-5 byteorder routines. Signed-off-by: Paul Mundt --- include/asm-sh/byteorder.h | 45 ++++++++++++++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/asm-sh/byteorder.h b/include/asm-sh/byteorder.h index bff2b1382e0..0eb9904b654 100644 --- a/include/asm-sh/byteorder.h +++ b/include/asm-sh/byteorder.h @@ -3,40 +3,55 @@ /* * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000, 2001 Paolo Alberelli */ - -#include #include +#include -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) { - __asm__("swap.b %0, %0\n\t" - "swap.w %0, %0\n\t" - "swap.b %0, %0" + __asm__( +#ifdef CONFIG_SUPERH32 + "swap.b %0, %0\n\t" + "swap.w %0, %0\n\t" + "swap.b %0, %0" +#else + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#endif : "=r" (x) : "0" (x)); + return x; } -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) +static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) { - __asm__("swap.b %0, %0" + __asm__( +#ifdef CONFIG_SUPERH32 + "swap.b %0, %0" +#else + "byterev %0, %0\n\t" + "shari %0, 32, %0" + +#endif : "=r" (x) : "0" (x)); + return x; } -static inline __u64 ___arch__swab64(__u64 val) -{ - union { +static inline __u64 ___arch__swab64(__u64 val) +{ + union { struct { __u32 a,b; } s; __u64 u; } v, w; v.u = val; - w.s.b = ___arch__swab32(v.s.a); - w.s.a = ___arch__swab32(v.s.b); - return w.u; -} + w.s.b = ___arch__swab32(v.s.a); + w.s.a = ___arch__swab32(v.s.b); + return w.u; +} #define __arch__swab64(x) ___arch__swab64(x) #define __arch__swab32(x) ___arch__swab32(x) -- cgit v1.2.3-70-g09d2 From cdcc970829e81da3445346cb71b2ea264c9952b9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 16:37:18 +0900 Subject: sh: Move in the SH-5 mmu_context headers. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/mmu_context.h | 27 +++++ include/asm-sh/mmu_context.h | 87 ++++----------- include/asm-sh/mmu_context_32.h | 47 ++++++++ include/asm-sh/mmu_context_64.h | 75 +++++++++++++ include/asm-sh64/mmu_context.h | 208 ----------------------------------- 5 files changed, 173 insertions(+), 271 deletions(-) create mode 100644 include/asm-sh/cpu-sh5/mmu_context.h create mode 100644 include/asm-sh/mmu_context_32.h create mode 100644 include/asm-sh/mmu_context_64.h delete mode 100644 include/asm-sh64/mmu_context.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/include/asm-sh/cpu-sh5/mmu_context.h new file mode 100644 index 00000000000..df857fc0996 --- /dev/null +++ b/include/asm-sh/cpu-sh5/mmu_context.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H +#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H + +/* Common defines */ +#define TLB_STEP 0x00000010 +#define TLB_PTEH 0x00000000 +#define TLB_PTEL 0x00000008 + +/* PTEH defines */ +#define PTEH_ASID_SHIFT 2 +#define PTEH_VALID 0x0000000000000001 +#define PTEH_SHARED 0x0000000000000002 +#define PTEH_MATCH_ASID 0x00000000000003ff + +#ifndef __ASSEMBLY__ +/* This has to be a common function because the next location to fill + * information is shared. */ +extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte); + +/* Profiling counter. */ +#ifdef CONFIG_SH64_PROC_TLB +extern unsigned long long calls_to_do_fast_page_fault; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */ diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index 199662bb35c..fe58d00b250 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -1,13 +1,13 @@ /* * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2003 - 2006 Paul Mundt + * Copyright (C) 2003 - 2007 Paul Mundt * * ASID handling idea taken from MIPS implementation. */ #ifndef __ASM_SH_MMU_CONTEXT_H #define __ASM_SH_MMU_CONTEXT_H -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include #include #include @@ -19,7 +19,6 @@ * (a) TLB cache version (or round, cycle whatever expression you like) * (b) ASID (Address Space IDentifier) */ - #define MMU_CONTEXT_ASID_MASK 0x000000ff #define MMU_CONTEXT_VERSION_MASK 0xffffff00 #define MMU_CONTEXT_FIRST_VERSION 0x00000100 @@ -28,10 +27,11 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 -#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) -#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & \ - MMU_CONTEXT_ASID_MASK) #define asid_cache(cpu) (cpu_data[cpu].asid_cache) +#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) + +#define cpu_asid(cpu, mm) \ + (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK) /* * Virtual Page Number mask @@ -39,6 +39,12 @@ #define MMU_VPN_MASK 0xfffff000 #ifdef CONFIG_MMU +#if defined(CONFIG_SUPERH32) +#include "mmu_context_32.h" +#else +#include "mmu_context_64.h" +#endif + /* * Get MMU context if needed. */ @@ -59,6 +65,14 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) */ flush_tlb_all(); +#ifdef CONFIG_SUPERH64 + /* + * The SH-5 cache uses the ASIDs, requiring both the I and D + * cache to be flushed when the ASID is exhausted. Weak. + */ + flush_cache_all(); +#endif + /* * Fix version; Note that we avoid version #0 * to distingush NO_CONTEXT. @@ -85,39 +99,6 @@ static inline int init_new_context(struct task_struct *tsk, return 0; } -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Do nothing */ -} - -static inline void set_asid(unsigned long asid) -{ - unsigned long __dummy; - - __asm__ __volatile__ ("mov.l %2, %0\n\t" - "and %3, %0\n\t" - "or %1, %0\n\t" - "mov.l %0, %2" - : "=&r" (__dummy) - : "r" (asid), "m" (__m(MMU_PTEH)), - "r" (0xffffff00)); -} - -static inline unsigned long get_asid(void) -{ - unsigned long asid; - - __asm__ __volatile__ ("mov.l %1, %0" - : "=r" (asid) - : "m" (__m(MMU_PTEH))); - asid &= MMU_CONTEXT_ASID_MASK; - return asid; -} - /* * After we have set current->mm to a new value, this activates * the context for the new mm so we see the new mappings. @@ -128,17 +109,6 @@ static inline void activate_context(struct mm_struct *mm, unsigned int cpu) set_asid(cpu_asid(cpu, mm)); } -/* MMU_TTB is used for optimizing the fault handling. */ -static inline void set_TTB(pgd_t *pgd) -{ - ctrl_outl((unsigned long)pgd, MMU_TTB); -} - -static inline pgd_t *get_TTB(void) -{ - return (pgd_t *)ctrl_inl(MMU_TTB); -} - static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) @@ -153,17 +123,7 @@ static inline void switch_mm(struct mm_struct *prev, if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) activate_context(next, cpu); } - -#define deactivate_mm(tsk,mm) do { } while (0) - -#define activate_mm(prev, next) \ - switch_mm((prev),(next),NULL) - -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} -#else /* !CONFIG_MMU */ +#else #define get_mmu_context(mm) do { } while (0) #define init_new_context(tsk,mm) (0) #define destroy_context(mm) do { } while (0) @@ -173,10 +133,11 @@ enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) #define get_TTB() (0) #define activate_context(mm,cpu) do { } while (0) #define switch_mm(prev,next,tsk) do { } while (0) +#endif /* CONFIG_MMU */ + +#define activate_mm(prev, next) switch_mm((prev),(next),NULL) #define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) do { } while (0) #define enter_lazy_tlb(mm,tsk) do { } while (0) -#endif /* CONFIG_MMU */ #if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) /* diff --git a/include/asm-sh/mmu_context_32.h b/include/asm-sh/mmu_context_32.h new file mode 100644 index 00000000000..f4f9aebd68b --- /dev/null +++ b/include/asm-sh/mmu_context_32.h @@ -0,0 +1,47 @@ +#ifndef __ASM_SH_MMU_CONTEXT_32_H +#define __ASM_SH_MMU_CONTEXT_32_H + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Do nothing */ +} + +static inline void set_asid(unsigned long asid) +{ + unsigned long __dummy; + + __asm__ __volatile__ ("mov.l %2, %0\n\t" + "and %3, %0\n\t" + "or %1, %0\n\t" + "mov.l %0, %2" + : "=&r" (__dummy) + : "r" (asid), "m" (__m(MMU_PTEH)), + "r" (0xffffff00)); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + __asm__ __volatile__ ("mov.l %1, %0" + : "=r" (asid) + : "m" (__m(MMU_PTEH))); + asid &= MMU_CONTEXT_ASID_MASK; + return asid; +} + +/* MMU_TTB is used for optimizing the fault handling. */ +static inline void set_TTB(pgd_t *pgd) +{ + ctrl_outl((unsigned long)pgd, MMU_TTB); +} + +static inline pgd_t *get_TTB(void) +{ + return (pgd_t *)ctrl_inl(MMU_TTB); +} +#endif /* __ASM_SH_MMU_CONTEXT_32_H */ diff --git a/include/asm-sh/mmu_context_64.h b/include/asm-sh/mmu_context_64.h new file mode 100644 index 00000000000..020be744b08 --- /dev/null +++ b/include/asm-sh/mmu_context_64.h @@ -0,0 +1,75 @@ +#ifndef __ASM_SH_MMU_CONTEXT_64_H +#define __ASM_SH_MMU_CONTEXT_64_H + +/* + * sh64-specific mmu_context interface. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include + +#define SR_ASID_MASK 0xffffffffff00ffffULL +#define SR_ASID_SHIFT 16 + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Well, at least free TLB entries */ + flush_tlb_mm(mm); +} + +static inline unsigned long get_asid(void) +{ + unsigned long long sr; + + asm volatile ("getcon " __SR ", %0\n\t" + : "=r" (sr)); + + sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; + return (unsigned long) sr; +} + +/* Set ASID into SR */ +static inline void set_asid(unsigned long asid) +{ + unsigned long long sr, pc; + + asm volatile ("getcon " __SR ", %0" : "=r" (sr)); + + sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); + + /* + * It is possible that this function may be inlined and so to avoid + * the assembler reporting duplicate symbols we make use of the + * gas trick of generating symbols using numerics and forward + * reference. + */ + asm volatile ("movi 1, %1\n\t" + "shlli %1, 28, %1\n\t" + "or %0, %1, %1\n\t" + "putcon %1, " __SR "\n\t" + "putcon %0, " __SSR "\n\t" + "movi 1f, %1\n\t" + "ori %1, 1 , %1\n\t" + "putcon %1, " __SPC "\n\t" + "rte\n" + "1:\n\t" + : "=r" (sr), "=r" (pc) : "0" (sr)); +} + +/* No spare register to twiddle, so use a software cache */ +extern pgd_t *mmu_pdtp_cache; + +#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) +#define get_TTB() (mmu_pdtp_cache) + +#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/include/asm-sh64/mmu_context.h b/include/asm-sh64/mmu_context.h deleted file mode 100644 index 507bf72bb8e..00000000000 --- a/include/asm-sh64/mmu_context.h +++ /dev/null @@ -1,208 +0,0 @@ -#ifndef __ASM_SH64_MMU_CONTEXT_H -#define __ASM_SH64_MMU_CONTEXT_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/mmu_context.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * ASID handling idea taken from MIPS implementation. - * - */ - -#ifndef __ASSEMBLY__ - -/* - * Cache of MMU context last used. - * - * The MMU "context" consists of two things: - * (a) TLB cache version (or cycle, top 24 bits of mmu_context_cache) - * (b) ASID (Address Space IDentifier, bottom 8 bits of mmu_context_cache) - */ -extern unsigned long mmu_context_cache; - -#include -#include - -/* Current mm's pgd */ -extern pgd_t *mmu_pdtp_cache; - -#define SR_ASID_MASK 0xffffffffff00ffffULL -#define SR_ASID_SHIFT 16 - -#define MMU_CONTEXT_ASID_MASK 0x000000ff -#define MMU_CONTEXT_VERSION_MASK 0xffffff00 -#define MMU_CONTEXT_FIRST_VERSION 0x00000100 -#define NO_CONTEXT 0 - -/* ASID is 8-bit value, so it can't be 0x100 */ -#define MMU_NO_ASID 0x100 - - -/* - * Virtual Page Number mask - */ -#define MMU_VPN_MASK 0xfffff000 - -static inline void -get_new_mmu_context(struct mm_struct *mm) -{ - extern void flush_tlb_all(void); - extern void flush_cache_all(void); - - unsigned long mc = ++mmu_context_cache; - - if (!(mc & MMU_CONTEXT_ASID_MASK)) { - /* We exhaust ASID of this version. - Flush all TLB and start new cycle. */ - flush_tlb_all(); - /* We have to flush all caches as ASIDs are - used in cache */ - flush_cache_all(); - /* Fix version if needed. - Note that we avoid version #0/asid #0 to distingush NO_CONTEXT. */ - if (!mc) - mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION; - } - mm->context = mc; -} - -/* - * Get MMU context if needed. - */ -static __inline__ void -get_mmu_context(struct mm_struct *mm) -{ - if (mm) { - unsigned long mc = mmu_context_cache; - /* Check if we have old version of context. - If it's old, we need to get new context with new version. */ - if ((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) - get_new_mmu_context(mm); - } -} - -/* - * Initialize the context related info for a new mm_struct - * instance. - */ -static inline int init_new_context(struct task_struct *tsk, - struct mm_struct *mm) -{ - mm->context = NO_CONTEXT; - - return 0; -} - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - extern void flush_tlb_mm(struct mm_struct *mm); - - /* Well, at least free TLB entries */ - flush_tlb_mm(mm); -} - -#endif /* __ASSEMBLY__ */ - -/* Common defines */ -#define TLB_STEP 0x00000010 -#define TLB_PTEH 0x00000000 -#define TLB_PTEL 0x00000008 - -/* PTEH defines */ -#define PTEH_ASID_SHIFT 2 -#define PTEH_VALID 0x0000000000000001 -#define PTEH_SHARED 0x0000000000000002 -#define PTEH_MATCH_ASID 0x00000000000003ff - -#ifndef __ASSEMBLY__ -/* This has to be a common function because the next location to fill - * information is shared. */ -extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte); - -/* Profiling counter. */ -#ifdef CONFIG_SH64_PROC_TLB -extern unsigned long long calls_to_do_fast_page_fault; -#endif - -static inline unsigned long get_asid(void) -{ - unsigned long long sr; - - asm volatile ("getcon " __SR ", %0\n\t" - : "=r" (sr)); - - sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; - return (unsigned long) sr; -} - -/* Set ASID into SR */ -static inline void set_asid(unsigned long asid) -{ - unsigned long long sr, pc; - - asm volatile ("getcon " __SR ", %0" : "=r" (sr)); - - sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); - - /* - * It is possible that this function may be inlined and so to avoid - * the assembler reporting duplicate symbols we make use of the gas trick - * of generating symbols using numerics and forward reference. - */ - asm volatile ("movi 1, %1\n\t" - "shlli %1, 28, %1\n\t" - "or %0, %1, %1\n\t" - "putcon %1, " __SR "\n\t" - "putcon %0, " __SSR "\n\t" - "movi 1f, %1\n\t" - "ori %1, 1 , %1\n\t" - "putcon %1, " __SPC "\n\t" - "rte\n" - "1:\n\t" - : "=r" (sr), "=r" (pc) : "0" (sr)); -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static __inline__ void activate_context(struct mm_struct *mm) -{ - get_mmu_context(mm); - set_asid(mm->context & MMU_CONTEXT_ASID_MASK); -} - - -static __inline__ void switch_mm(struct mm_struct *prev, - struct mm_struct *next, - struct task_struct *tsk) -{ - if (prev != next) { - mmu_pdtp_cache = next->pgd; - activate_context(next); - } -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -#define activate_mm(prev, next) \ - switch_mm((prev),(next),NULL) - -static inline void -enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_SH64_MMU_CONTEXT_H */ -- cgit v1.2.3-70-g09d2 From 33f242ed11ce6b5fbe73fe4ece7ef4bc2f4e2851 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 16:57:27 +0900 Subject: sh: SH-5 pt_regs. Signed-off-by: Paul Mundt --- include/asm-sh/ptrace.h | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h index b9789c8b4d1..a83a7b45ba6 100644 --- a/include/asm-sh/ptrace.h +++ b/include/asm-sh/ptrace.h @@ -5,7 +5,16 @@ * Copyright (C) 1999, 2000 Niibe Yutaka * */ - +#if defined(__SH5__) || defined(CONFIG_SUPERH64) +struct pt_regs { + unsigned long long pc; + unsigned long long sr; + unsigned long long syscall_nr; + unsigned long long regs[63]; + unsigned long long tregs[8]; + unsigned long long pad[2]; +}; +#else /* * GCC defines register number like this: * ----------------------------- @@ -28,7 +37,7 @@ #define REG_PR 17 #define REG_SR 18 -#define REG_GBR 19 +#define REG_GBR 19 #define REG_MACH 20 #define REG_MACL 21 @@ -80,10 +89,14 @@ struct pt_dspregs { #define PTRACE_GETDSPREGS 55 #define PTRACE_SETDSPREGS 56 +#endif #ifdef __KERNEL__ -#define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define instruction_pointer(regs) ((regs)->pc) +#include + +#define user_mode(regs) (((regs)->sr & 0x40000000)==0) +#define instruction_pointer(regs) ((regs)->pc) + extern void show_regs(struct pt_regs *); #ifdef CONFIG_SH_DSP @@ -100,10 +113,13 @@ static inline unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); - if (pc >= 0xa0000000UL && pc < 0xc0000000UL) +#ifdef P2SEG + if (pc >= P2SEG && pc < P3SEG) pc -= 0x20000000; +#endif + return pc; } -#endif +#endif /* __KERNEL__ */ #endif /* __ASM_SH_PTRACE_H */ -- cgit v1.2.3-70-g09d2 From af3c7dfe822b598a2f977098101ed8b63cf0fdd1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 9 Nov 2007 17:08:54 +0900 Subject: sh: Split out processor.h in to _32 and _64 variants. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_64 | 21 ++++ include/asm-sh/processor.h | 247 +----------------------------------- include/asm-sh/processor_32.h | 248 ++++++++++++++++++++++++++++++++++++ include/asm-sh/processor_64.h | 277 ++++++++++++++++++++++++++++++++++++++++ include/asm-sh64/processor.h | 287 ------------------------------------------ 5 files changed, 552 insertions(+), 528 deletions(-) create mode 100644 arch/sh/kernel/Makefile_64 create mode 100644 include/asm-sh/processor_32.h create mode 100644 include/asm-sh/processor_64.h delete mode 100644 include/asm-sh64/processor.h (limited to 'include') diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 new file mode 100644 index 00000000000..7dd7de9ff3c --- /dev/null +++ b/arch/sh/kernel/Makefile_64 @@ -0,0 +1,21 @@ +extra-y := head.o init_task.o vmlinux.lds + +obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ + ptrace.o semaphore.o setup.o signal.o sys_sh.o syscalls.o \ + time.o topology.o traps.o + +obj-y += cpu/ timers/ +obj-$(CONFIG_VSYSCALL) += vsyscall/ +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_CF_ENABLER) += cf-enabler.o +obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o +obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o +obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_MODULES) += sh_ksyms.o module.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o + +EXTRA_CFLAGS += -Werror diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index fda68480f37..bf01f486c3e 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -1,31 +1,5 @@ -/* - * include/asm-sh/processor.h - * - * Copyright (C) 1999, 2000 Niibe Yutaka - * Copyright (C) 2002, 2003 Paul Mundt - */ - #ifndef __ASM_SH_PROCESSOR_H #define __ASM_SH_PROCESSOR_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include -#include - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; }) - -/* Core Processor Version Register */ -#define CCN_PVR 0xff000030 -#define CCN_CVR 0xff000040 -#define CCN_PRR 0xff000044 /* * CPU type and hardware bug flags. Kept separately for each CPU. @@ -57,229 +31,20 @@ enum cpu_type { /* SH4AL-DSP types */ CPU_SH7343, CPU_SH7722, + /* SH-5 types */ + CPU_SH5_101, CPU_SH5_103, + /* Unknown subtype */ CPU_SH_NONE }; -struct sh_cpuinfo { - unsigned int type; - unsigned long loops_per_jiffy; - unsigned long asid_cache; - - struct cache_info icache; /* Primary I-cache */ - struct cache_info dcache; /* Primary D-cache */ - struct cache_info scache; /* Secondary cache */ - - unsigned long flags; -} __attribute__ ((aligned(L1_CACHE_BYTES))); - -extern struct sh_cpuinfo cpu_data[]; -#define boot_cpu_data cpu_data[0] -#define current_cpu_data cpu_data[smp_processor_id()] -#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] - -/* - * User space process size: 2GB. - * - * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff - */ -#define TASK_SIZE 0x7c000000UL - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - */ -#define SR_FD 0x00008000 -#define SR_DSP 0x00001000 -#define SR_IMASK 0x000000f0 - -/* - * FPU structure and data - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; - - long status; /* software status information */ -}; - -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long fp_regs[16]; - unsigned long xfp_regs[16]; - unsigned long fpscr; - unsigned long fpul; - - unsigned char lookahead; - unsigned long entry_pc; -}; - -union sh_fpu_union { - struct sh_fpu_hard_struct hard; - struct sh_fpu_soft_struct soft; -}; - -struct thread_struct { - /* Saved registers when thread is descheduled */ - unsigned long sp; - unsigned long pc; - - /* Hardware debugging registers */ - unsigned long ubc_pc; - - /* floating point info */ - union sh_fpu_union fpu; -}; - -typedef struct { - unsigned long seg; -} mm_segment_t; - -/* Count of active tasks with UBC settings */ -extern int ubc_usercnt; - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + (long) &init_stack, \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define start_thread(regs, new_pc, new_sp) \ - set_fs(USER_DS); \ - regs->pr = 0; \ - regs->sr = SR_FD; /* User mode. */ \ - regs->pc = new_pc; \ - regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while(0) -#define release_segments(mm) do { } while(0) - -/* - * FPU lazy state save handling. - */ - -static __inline__ void disable_fpu(void) -{ - unsigned long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("stc sr, %0\n\t" - "or %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static __inline__ void enable_fpu(void) -{ - unsigned long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("stc sr, %0\n\t" - "and %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -static __inline__ void release_fpu(struct pt_regs *regs) -{ - regs->sr |= SR_FD; -} - -static __inline__ void grab_fpu(struct pt_regs *regs) -{ - regs->sr &= ~SR_FD; -} - -extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); - -#define unlazy_fpu(tsk, regs) do { \ - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ - save_fpu(tsk, regs); \ - } \ -} while (0) - -#define clear_fpu(tsk, regs) do { \ - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ - clear_tsk_thread_flag(tsk, TIF_USEDFPU); \ - release_fpu(regs); \ - } \ -} while (0) - -/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ -#define FPSCR_INIT 0x00080000 - -#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ -#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -void show_trace(struct task_struct *tsk, unsigned long *sp, - struct pt_regs *regs); -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) -#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) - -#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") -#define cpu_relax() barrier() - -#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_CPU_SH4) -#define PREFETCH_STRIDE L1_CACHE_BYTES -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -static inline void prefetch(void *x) -{ - __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); -} - -#define prefetchw(x) prefetch(x) -#endif - -#ifdef CONFIG_VSYSCALL -extern int vsyscall_init(void); +#ifdef CONFIG_SUPERH32 +# include "processor_32.h" #else -#define vsyscall_init() do { } while (0) +# include "processor_64.h" #endif /* arch/sh/kernel/setup.c */ const char *get_cpu_subtype(struct sh_cpuinfo *c); -#endif /* __KERNEL__ */ #endif /* __ASM_SH_PROCESSOR_H */ diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h new file mode 100644 index 00000000000..e10d0ee0c22 --- /dev/null +++ b/include/asm-sh/processor_32.h @@ -0,0 +1,248 @@ +/* + * include/asm-sh/processor.h + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + */ + +#ifndef __ASM_SH_PROCESSOR_32_H +#define __ASM_SH_PROCESSOR_32_H +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include +#include + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; }) + +/* Core Processor Version Register */ +#define CCN_PVR 0xff000030 +#define CCN_CVR 0xff000040 +#define CCN_PRR 0xff000044 + +struct sh_cpuinfo { + unsigned int type; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + struct cache_info icache; /* Primary I-cache */ + struct cache_info dcache; /* Primary D-cache */ + struct cache_info scache; /* Secondary cache */ + + unsigned long flags; +} __attribute__ ((aligned(L1_CACHE_BYTES))); + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +/* + * User space process size: 2GB. + * + * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff + */ +#define TASK_SIZE 0x7c000000UL + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + */ +#define SR_FD 0x00008000 +#define SR_DSP 0x00001000 +#define SR_IMASK 0x000000f0 + +/* + * FPU structure and data + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + long status; /* software status information */ +}; + +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + unsigned char lookahead; + unsigned long entry_pc; +}; + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + struct sh_fpu_soft_struct soft; +}; + +struct thread_struct { + /* Saved registers when thread is descheduled */ + unsigned long sp; + unsigned long pc; + + /* Hardware debugging registers */ + unsigned long ubc_pc; + + /* floating point info */ + union sh_fpu_union fpu; +}; + +typedef struct { + unsigned long seg; +} mm_segment_t; + +/* Count of active tasks with UBC settings */ +extern int ubc_usercnt; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + (long) &init_stack, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->pr = 0; \ + regs->sr = SR_FD; /* User mode. */ \ + regs->pc = new_pc; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while(0) +#define release_segments(mm) do { } while(0) + +/* + * FPU lazy state save handling. + */ + +static __inline__ void disable_fpu(void) +{ + unsigned long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "or %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static __inline__ void enable_fpu(void) +{ + unsigned long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "and %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +static __inline__ void release_fpu(struct pt_regs *regs) +{ + regs->sr |= SR_FD; +} + +static __inline__ void grab_fpu(struct pt_regs *regs) +{ + regs->sr &= ~SR_FD; +} + +extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); + +#define unlazy_fpu(tsk, regs) do { \ + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ + save_fpu(tsk, regs); \ + } \ +} while (0) + +#define clear_fpu(tsk, regs) do { \ + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ + clear_tsk_thread_flag(tsk, TIF_USEDFPU); \ + release_fpu(regs); \ + } \ +} while (0) + +/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ +#define FPSCR_INIT 0x00080000 + +#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ +#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs); +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) + +#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") +#define cpu_relax() barrier() + +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_CPU_SH4) +#define PREFETCH_STRIDE L1_CACHE_BYTES +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +static inline void prefetch(void *x) +{ + __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); +} + +#define prefetchw(x) prefetch(x) +#endif + +#ifdef CONFIG_VSYSCALL +extern int vsyscall_init(void); +#else +#define vsyscall_init() do { } while (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_PROCESSOR_32_H */ diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h new file mode 100644 index 00000000000..5430e437b91 --- /dev/null +++ b/include/asm-sh/processor_64.h @@ -0,0 +1,277 @@ +#ifndef __ASM_SH_PROCESSOR_64_H +#define __ASM_SH_PROCESSOR_64_H + +/* + * include/asm-sh/processor_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASSEMBLY__ + +#include +#include +#include +#include +#include + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ \ +void *pc; \ +unsigned long long __dummy = 0; \ +__asm__("gettr tr0, %1\n\t" \ + "pta 4, tr0\n\t" \ + "gettr tr0, %0\n\t" \ + "ptabs %1, tr0\n\t" \ + :"=r" (pc), "=r" (__dummy) \ + : "1" (__dummy)); \ +pc; }) + +/* + * TLB information structure + * + * Defined for both I and D tlb, per-processor. + */ +struct tlb_info { + unsigned long long next; + unsigned long long first; + unsigned long long last; + + unsigned int entries; + unsigned int step; + + unsigned long flags; +}; + +struct sh_cpuinfo { + enum cpu_type type; + unsigned long loops_per_jiffy; + + char hard_math; + + unsigned long *pgd_quick; + unsigned long *pmd_quick; + unsigned long *pte_quick; + unsigned long pgtable_cache_sz; + unsigned int cpu_clock, master_clock, bus_clock, module_clock; + + /* Cache info */ + struct cache_info icache; + struct cache_info dcache; + + /* TLB info */ + struct tlb_info itlb; + struct tlb_info dtlb; +}; + +extern struct sh_cpuinfo boot_cpu_data; + +#define cpu_data (&boot_cpu_data) +#define current_cpu_data boot_cpu_data + +#endif + +/* + * User space process size: 2GB - 4k. + */ +#define TASK_SIZE 0x7ffff000UL + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + * + * STEP-bit: + * Single step bit + * + */ +#define SR_FD 0x00008000 + +#if defined(CONFIG_SH64_SR_WATCH) +#define SR_MMU 0x84000000 +#else +#define SR_MMU 0x80000000 +#endif + +#define SR_IMASK 0x000000f0 +#define SR_SSTEP 0x08000000 + +#ifndef __ASSEMBLY__ + +/* + * FPU structure and data : require 8-byte alignment as we need to access it + with fld.p, fst.p + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[64]; + unsigned int fpscr; + /* long status; * software status information */ +}; + +#if 0 +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long long fp_regs[32]; + unsigned int fpscr; + unsigned char lookahead; + unsigned long entry_pc; +}; +#endif + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + /* 'hard' itself only produces 32 bit alignment, yet we need + to access it using 64 bit load/store as well. */ + unsigned long long alignment_dummy; +}; + +struct thread_struct { + unsigned long sp; + unsigned long pc; + /* This stores the address of the pt_regs built during a context + switch, or of the register save area built for a kernel mode + exception. It is used for backtracing the stack of a sleeping task + or one that traps in kernel mode. */ + struct pt_regs *kregs; + /* This stores the address of the pt_regs constructed on entry from + user mode. It is a fixed value over the lifetime of a process, or + NULL for a kernel thread. */ + struct pt_regs *uregs; + + unsigned long trap_no, error_code; + unsigned long address; + /* Hardware debugging registers may come here */ + + /* floating point info */ + union sh_fpu_union fpu; +}; + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define INIT_MMAP \ +{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } + +extern struct pt_regs fake_swapper_regs; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + \ + (long) &init_stack, \ + .pc = 0, \ + .kregs = &fake_swapper_regs, \ + .uregs = NULL, \ + .trap_no = 0, \ + .error_code = 0, \ + .address = 0, \ + .fpu = { { { 0, } }, } \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define SR_USER (SR_MMU | SR_FD) + +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->sr = SR_USER; /* User mode. */ \ + regs->pc = new_pc - 4; /* Compensate syscall exit */ \ + regs->pc |= 1; /* Set SHmedia ! */ \ + regs->regs[18] = 0; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) +#define prepare_to_copy(tsk) do { } while (0) +/* + * FPU lazy state save handling. + */ + +static inline void release_fpu(void) +{ + unsigned long long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static inline void grab_fpu(void) +{ + unsigned long long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Round to nearest, no exceptions on inexact, overflow, underflow, + zero-divide, invalid. Configure option for whether to flush denorms to + zero, or except if a denorm is encountered. */ +#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) +#define FPSCR_INIT 0x00040000 +#else +#define FPSCR_INIT 0x00000000 +#endif + +/* Save the current FP regs */ +void fpsave(struct sh_fpu_hard_struct *fpregs); + +/* Initialise the FP state of a task */ +void fpinit(struct sh_fpu_hard_struct *fpregs); + +extern struct task_struct *last_task_used_math; + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.pc) +#define KSTK_ESP(tsk) ((tsk)->thread.sp) + +#define cpu_relax() barrier() + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/include/asm-sh64/processor.h b/include/asm-sh64/processor.h deleted file mode 100644 index eb2bee4b47b..00000000000 --- a/include/asm-sh64/processor.h +++ /dev/null @@ -1,287 +0,0 @@ -#ifndef __ASM_SH64_PROCESSOR_H -#define __ASM_SH64_PROCESSOR_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/processor.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - */ - -#include - -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ \ -void *pc; \ -unsigned long long __dummy = 0; \ -__asm__("gettr tr0, %1\n\t" \ - "pta 4, tr0\n\t" \ - "gettr tr0, %0\n\t" \ - "ptabs %1, tr0\n\t" \ - :"=r" (pc), "=r" (__dummy) \ - : "1" (__dummy)); \ -pc; }) - -/* - * CPU type and hardware bug flags. Kept separately for each CPU. - */ -enum cpu_type { - CPU_SH5_101, - CPU_SH5_103, - CPU_SH_NONE -}; - -/* - * TLB information structure - * - * Defined for both I and D tlb, per-processor. - */ -struct tlb_info { - unsigned long long next; - unsigned long long first; - unsigned long long last; - - unsigned int entries; - unsigned int step; - - unsigned long flags; -}; - -struct sh_cpuinfo { - enum cpu_type type; - unsigned long loops_per_jiffy; - - char hard_math; - - unsigned long *pgd_quick; - unsigned long *pmd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; - unsigned int cpu_clock, master_clock, bus_clock, module_clock; - - /* Cache info */ - struct cache_info icache; - struct cache_info dcache; - - /* TLB info */ - struct tlb_info itlb; - struct tlb_info dtlb; -}; - -extern struct sh_cpuinfo boot_cpu_data; - -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data - -#endif - -/* - * User space process size: 2GB - 4k. - */ -#define TASK_SIZE 0x7ffff000UL - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - * - * STEP-bit: - * Single step bit - * - */ -#define SR_FD 0x00008000 - -#if defined(CONFIG_SH64_SR_WATCH) -#define SR_MMU 0x84000000 -#else -#define SR_MMU 0x80000000 -#endif - -#define SR_IMASK 0x000000f0 -#define SR_SSTEP 0x08000000 - -#ifndef __ASSEMBLY__ - -/* - * FPU structure and data : require 8-byte alignment as we need to access it - with fld.p, fst.p - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[64]; - unsigned int fpscr; - /* long status; * software status information */ -}; - -#if 0 -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long long fp_regs[32]; - unsigned int fpscr; - unsigned char lookahead; - unsigned long entry_pc; -}; -#endif - -union sh_fpu_union { - struct sh_fpu_hard_struct hard; - /* 'hard' itself only produces 32 bit alignment, yet we need - to access it using 64 bit load/store as well. */ - unsigned long long alignment_dummy; -}; - -struct thread_struct { - unsigned long sp; - unsigned long pc; - /* This stores the address of the pt_regs built during a context - switch, or of the register save area built for a kernel mode - exception. It is used for backtracing the stack of a sleeping task - or one that traps in kernel mode. */ - struct pt_regs *kregs; - /* This stores the address of the pt_regs constructed on entry from - user mode. It is a fixed value over the lifetime of a process, or - NULL for a kernel thread. */ - struct pt_regs *uregs; - - unsigned long trap_no, error_code; - unsigned long address; - /* Hardware debugging registers may come here */ - - /* floating point info */ - union sh_fpu_union fpu; -}; - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } - -extern struct pt_regs fake_swapper_regs; - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + \ - (long) &init_stack, \ - .pc = 0, \ - .kregs = &fake_swapper_regs, \ - .uregs = NULL, \ - .trap_no = 0, \ - .error_code = 0, \ - .address = 0, \ - .fpu = { { { 0, } }, } \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define SR_USER (SR_MMU | SR_FD) - -#define start_thread(regs, new_pc, new_sp) \ - set_fs(USER_DS); \ - regs->sr = SR_USER; /* User mode. */ \ - regs->pc = new_pc - 4; /* Compensate syscall exit */ \ - regs->pc |= 1; /* Set SHmedia ! */ \ - regs->regs[18] = 0; \ - regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); -/* - * create a kernel thread without removing it from tasklists - */ -extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - - -/* Copy and release all segment info associated with a VM */ -#define copy_segments(p, mm) do { } while (0) -#define release_segments(mm) do { } while (0) -#define forget_segments() do { } while (0) -#define prepare_to_copy(tsk) do { } while (0) -/* - * FPU lazy state save handling. - */ - -static inline void release_fpu(void) -{ - unsigned long long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static inline void grab_fpu(void) -{ - unsigned long long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -/* Round to nearest, no exceptions on inexact, overflow, underflow, - zero-divide, invalid. Configure option for whether to flush denorms to - zero, or except if a denorm is encountered. */ -#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) -#define FPSCR_INIT 0x00040000 -#else -#define FPSCR_INIT 0x00000000 -#endif - -/* Save the current FP regs */ -void fpsave(struct sh_fpu_hard_struct *fpregs); - -/* Initialise the FP state of a task */ -void fpinit(struct sh_fpu_hard_struct *fpregs); - -extern struct task_struct *last_task_used_math; - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.pc) -#define KSTK_ESP(tsk) ((tsk)->thread.sp) - -#define cpu_relax() barrier() - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH64_PROCESSOR_H */ - -- cgit v1.2.3-70-g09d2 From 36bcd39dbca824daffe16d607ae574b6edc7d31a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 19:16:55 +0900 Subject: sh: Split out 29-bit and 32-bit physical mode definitions. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 11 +++++++++++ arch/sh/mm/Makefile | 2 +- include/asm-sh/pgtable.h | 17 +++++++++++++++++ 3 files changed, 29 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index a7bbc2cbbf8..8192c872a69 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -46,9 +46,20 @@ config MEMORY_SIZE as 0x00400000 which was the default value before this became configurable. +# Physical addressing modes + +config 29BIT + def_bool !32BIT + depends on SUPERH32 + config 32BIT + bool + default y if CPU_SH5 + +config PMB bool "Support 32-bit physical addressing through PMB" depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) + select 32BIT default y help If you say Y here, physical addressing will be extended to diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index aa44607f072..d35caccd0aa 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -31,7 +31,7 @@ endif endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_32BIT) += pmb.o +obj-$(CONFIG_PMB) += pmb.o obj-$(CONFIG_NUMA) += numa.o EXTRA_CFLAGS += -Werror diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 8f1e8be8d15..6ab3ba82d25 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -28,6 +28,23 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #endif /* !__ASSEMBLY__ */ +/* + * Effective and physical address definitions, to aid with sign + * extension. + */ +#define NEFF 32 +#define NEFF_SIGN (1LL << (NEFF - 1)) +#define NEFF_MASK (-1LL << NEFF) + +#ifdef CONFIG_29BIT +#define NPHYS 29 +#else +#define NPHYS 32 +#endif + +#define NPHYS_SIGN (1LL << (NPHYS - 1)) +#define NPHYS_MASK (-1LL << NPHYS) + /* * traditional two-level paging structure */ -- cgit v1.2.3-70-g09d2 From a62a3861e0adfd2612372883b5b1fc05a5182796 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 19:46:31 +0900 Subject: sh: Split out system.h in to _32 and _64 variants. Signed-off-by: Paul Mundt --- include/asm-sh/system.h | 97 ++--------------------- include/asm-sh/system_32.h | 97 +++++++++++++++++++++++ include/asm-sh/system_64.h | 39 ++++++++++ include/asm-sh64/system.h | 190 --------------------------------------------- 4 files changed, 144 insertions(+), 279 deletions(-) create mode 100644 include/asm-sh/system_32.h create mode 100644 include/asm-sh/system_64.h delete mode 100644 include/asm-sh64/system.h (limited to 'include') diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 288abeb5476..0cfa96aa584 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -12,60 +12,9 @@ #include #include -struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *next); - #define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */ -/* - * switch_to() should switch tasks to task nr n, first - */ - -#define switch_to(prev, next, last) do { \ - struct task_struct *__last; \ - register unsigned long *__ts1 __asm__ ("r1") = &prev->thread.sp; \ - register unsigned long *__ts2 __asm__ ("r2") = &prev->thread.pc; \ - register unsigned long *__ts4 __asm__ ("r4") = (unsigned long *)prev; \ - register unsigned long *__ts5 __asm__ ("r5") = (unsigned long *)next; \ - register unsigned long *__ts6 __asm__ ("r6") = &next->thread.sp; \ - register unsigned long __ts7 __asm__ ("r7") = next->thread.pc; \ - __asm__ __volatile__ (".balign 4\n\t" \ - "stc.l gbr, @-r15\n\t" \ - "sts.l pr, @-r15\n\t" \ - "mov.l r8, @-r15\n\t" \ - "mov.l r9, @-r15\n\t" \ - "mov.l r10, @-r15\n\t" \ - "mov.l r11, @-r15\n\t" \ - "mov.l r12, @-r15\n\t" \ - "mov.l r13, @-r15\n\t" \ - "mov.l r14, @-r15\n\t" \ - "mov.l r15, @r1 ! save SP\n\t" \ - "mov.l @r6, r15 ! change to new stack\n\t" \ - "mova 1f, %0\n\t" \ - "mov.l %0, @r2 ! save PC\n\t" \ - "mov.l 2f, %0\n\t" \ - "jmp @%0 ! call __switch_to\n\t" \ - " lds r7, pr ! with return to new PC\n\t" \ - ".balign 4\n" \ - "2:\n\t" \ - ".long __switch_to\n" \ - "1:\n\t" \ - "mov.l @r15+, r14\n\t" \ - "mov.l @r15+, r13\n\t" \ - "mov.l @r15+, r12\n\t" \ - "mov.l @r15+, r11\n\t" \ - "mov.l @r15+, r10\n\t" \ - "mov.l @r15+, r9\n\t" \ - "mov.l @r15+, r8\n\t" \ - "lds.l @r15+, pr\n\t" \ - "ldc.l @r15+, gbr\n\t" \ - : "=z" (__last) \ - : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ - "r" (__ts5), "r" (__ts6), "r" (__ts7) \ - : "r3", "t"); \ - last = __last; \ -} while (0) -#ifdef CONFIG_CPU_SH4A +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) #define __icbi() \ { \ unsigned long __addr; \ @@ -91,7 +40,7 @@ struct task_struct *__switch_to(struct task_struct *prev, * Historically we have only done this type of barrier for the MMUCR, but * it's also necessary for the CCR, so we make it generic here instead. */ -#ifdef CONFIG_CPU_SH4A +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) #define mb() __asm__ __volatile__ ("synco": : :"memory") #define rmb() mb() #define wmb() __asm__ __volatile__ ("synco": : :"memory") @@ -119,42 +68,6 @@ struct task_struct *__switch_to(struct task_struct *prev, #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) -/* - * Jump to P2 area. - * When handling TLB or caches, we need to do it from P2 area. - */ -#define jump_to_P2() \ -do { \ - unsigned long __dummy; \ - __asm__ __volatile__( \ - "mov.l 1f, %0\n\t" \ - "or %1, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1: .long 2f\n" \ - "2:" \ - : "=&r" (__dummy) \ - : "r" (0x20000000)); \ -} while (0) - -/* - * Back to P1 area. - */ -#define back_to_P1() \ -do { \ - unsigned long __dummy; \ - ctrl_barrier(); \ - __asm__ __volatile__( \ - "mov.l 1f, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1: .long 2f\n" \ - "2:" \ - : "=&r" (__dummy)); \ -} while (0) - static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) { unsigned long flags, retval; @@ -281,4 +194,10 @@ asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, #define arch_align_stack(x) (x) +#ifdef CONFIG_SUPERH32 +# include "system_32.h" +#else +# include "system_64.h" +#endif + #endif diff --git a/include/asm-sh/system_32.h b/include/asm-sh/system_32.h new file mode 100644 index 00000000000..ad37e8d5f31 --- /dev/null +++ b/include/asm-sh/system_32.h @@ -0,0 +1,97 @@ +#ifndef __ASM_SH_SYSTEM_32_H +#define __ASM_SH_SYSTEM_32_H + +#include + +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next); + +/* + * switch_to() should switch tasks to task nr n, first + */ +#define switch_to(prev, next, last) \ +do { \ + register u32 *__ts1 __asm__ ("r1") = &prev->thread.sp; \ + register u32 *__ts2 __asm__ ("r2") = &prev->thread.pc; \ + register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ + register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ + register u32 *__ts6 __asm__ ("r6") = &next->thread.sp; \ + register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ + struct task_struct *__last; \ + \ + __asm__ __volatile__ ( \ + ".balign 4\n\t" \ + "stc.l gbr, @-r15\n\t" \ + "sts.l pr, @-r15\n\t" \ + "mov.l r8, @-r15\n\t" \ + "mov.l r9, @-r15\n\t" \ + "mov.l r10, @-r15\n\t" \ + "mov.l r11, @-r15\n\t" \ + "mov.l r12, @-r15\n\t" \ + "mov.l r13, @-r15\n\t" \ + "mov.l r14, @-r15\n\t" \ + "mov.l r15, @r1\t! save SP\n\t" \ + "mov.l @r6, r15\t! change to new stack\n\t" \ + "mova 1f, %0\n\t" \ + "mov.l %0, @r2\t! save PC\n\t" \ + "mov.l 2f, %0\n\t" \ + "jmp @%0\t! call __switch_to\n\t" \ + " lds r7, pr\t! with return to new PC\n\t" \ + ".balign 4\n" \ + "2:\n\t" \ + ".long __switch_to\n" \ + "1:\n\t" \ + "mov.l @r15+, r14\n\t" \ + "mov.l @r15+, r13\n\t" \ + "mov.l @r15+, r12\n\t" \ + "mov.l @r15+, r11\n\t" \ + "mov.l @r15+, r10\n\t" \ + "mov.l @r15+, r9\n\t" \ + "mov.l @r15+, r8\n\t" \ + "lds.l @r15+, pr\n\t" \ + "ldc.l @r15+, gbr\n\t" \ + : "=z" (__last) \ + : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ + "r" (__ts5), "r" (__ts6), "r" (__ts7) \ + : "r3", "t"); \ + \ + last = __last; \ +} while (0) + +/* + * Jump to P2 area. + * When handling TLB or caches, we need to do it from P2 area. + */ +#define jump_to_P2() \ +do { \ + unsigned long __dummy; \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "or %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy) \ + : "r" (0x20000000)); \ +} while (0) + +/* + * Back to P1 area. + */ +#define back_to_P1() \ +do { \ + unsigned long __dummy; \ + ctrl_barrier(); \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +#endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/include/asm-sh/system_64.h b/include/asm-sh/system_64.h new file mode 100644 index 00000000000..0e466e991f7 --- /dev/null +++ b/include/asm-sh/system_64.h @@ -0,0 +1,39 @@ +#ifndef __ASM_SH_SYSTEM_64_H +#define __ASM_SH_SYSTEM_64_H + +/* + * include/asm-sh/system_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* + * switch_to() should switch tasks to task nr n, first + */ +struct task_struct *sh64_switch_to(struct task_struct *prev, + struct thread_struct *prev_thread, + struct task_struct *next, + struct thread_struct *next_thread); + +#define switch_to(prev,next,last) \ +do { \ + if (last_task_used_math != next) { \ + struct pt_regs *regs = next->thread.uregs; \ + if (regs) regs->sr |= SR_FD; \ + } \ + last = sh64_switch_to(prev, &prev->thread, next, \ + &next->thread); \ +} while (0) + +/* No segmentation.. */ +#define jump_to_P2() do { } while (0) +#define back_to_P1() do { } while (0) + +#endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/include/asm-sh64/system.h b/include/asm-sh64/system.h deleted file mode 100644 index be2a15ffcc5..00000000000 --- a/include/asm-sh64/system.h +++ /dev/null @@ -1,190 +0,0 @@ -#ifndef __ASM_SH64_SYSTEM_H -#define __ASM_SH64_SYSTEM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/system.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - */ - -#include -#include - -/* - * switch_to() should switch tasks to task nr n, first - */ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -extern struct task_struct *sh64_switch_to(struct task_struct *prev, - struct thread_struct *prev_thread, - struct task_struct *next, - struct thread_struct *next_thread); - -#define switch_to(prev,next,last) \ - do {\ - if (last_task_used_math != next) {\ - struct pt_regs *regs = next->thread.uregs;\ - if (regs) regs->sr |= SR_FD;\ - }\ - last = sh64_switch_to(prev, &prev->thread, next, &next->thread);\ - } while(0) - -#define nop() __asm__ __volatile__ ("nop") - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -extern void __xchg_called_with_bad_pointer(void); - -#define mb() __asm__ __volatile__ ("synco": : :"memory") -#define rmb() mb() -#define wmb() __asm__ __volatile__ ("synco": : :"memory") -#define read_barrier_depends() do { } while (0) - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) -#endif /* CONFIG_SMP */ - -#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) - -/* Interrupt Control */ -#ifndef HARD_CLI -#define SR_MASK_L 0x000000f0L -#define SR_MASK_LL 0x00000000000000f0LL -#else -#define SR_MASK_L 0x10000000L -#define SR_MASK_LL 0x0000000010000000LL -#endif - -static __inline__ void local_irq_enable(void) -{ - /* cli/sti based on SR.BL */ - unsigned long long __dummy0, __dummy1=~SR_MASK_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -static __inline__ void local_irq_disable(void) -{ - /* cli/sti based on SR.BL */ - unsigned long long __dummy0, __dummy1=SR_MASK_LL; - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -#define local_save_flags(x) \ -(__extension__ ({ unsigned long long __dummy=SR_MASK_LL; \ - __asm__ __volatile__( \ - "getcon " __SR ", %0\n\t" \ - "and %0, %1, %0" \ - : "=&r" (x) \ - : "r" (__dummy));})) - -#define local_irq_save(x) \ -(__extension__ ({ unsigned long long __d2=SR_MASK_LL, __d1; \ - __asm__ __volatile__( \ - "getcon " __SR ", %1\n\t" \ - "or %1, r63, %0\n\t" \ - "or %1, %2, %1\n\t" \ - "putcon %1, " __SR "\n\t" \ - "and %0, %2, %0" \ - : "=&r" (x), "=&r" (__d1) \ - : "r" (__d2));})); - -#define local_irq_restore(x) do { \ - if ( ((x) & SR_MASK_L) == 0 ) /* dropping to 0 ? */ \ - local_irq_enable(); /* yes...re-enable */ \ -} while (0) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags != 0); \ -}) - -static inline unsigned long xchg_u32(volatile int * m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -static inline unsigned long xchg_u8(volatile unsigned char * m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val & 0xff; - local_irq_restore(flags); - return retval; -} - -static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr, int size) -{ - switch (size) { - case 4: - return xchg_u32(ptr, x); - break; - case 1: - return xchg_u8(ptr, x); - break; - } - __xchg_called_with_bad_pointer(); - return x; -} - -/* XXX - * disable hlt during certain critical i/o operations - */ -#define HAVE_DISABLE_HLT -void disable_hlt(void); -void enable_hlt(void); - - -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() - -#ifdef CONFIG_SH_ALPHANUMERIC -/* This is only used for debugging. */ -extern void print_seg(char *file,int line); -#define PLS() print_seg(__FILE__,__LINE__) -#else /* CONFIG_SH_ALPHANUMERIC */ -#define PLS() -#endif /* CONFIG_SH_ALPHANUMERIC */ - -#define PL() printk("@ <%s,%s:%d>\n",__FILE__,__FUNCTION__,__LINE__) - -#define arch_align_stack(x) (x) - -#endif /* __ASM_SH64_SYSTEM_H */ -- cgit v1.2.3-70-g09d2 From c0acca6789281650134cfbbe00fc461e39440446 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 19:54:16 +0900 Subject: sh: SH-5 also uses the ASID cache. Signed-off-by: Paul Mundt --- include/asm-sh/processor_64.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index 5430e437b91..6ad23387d7b 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -54,18 +54,14 @@ struct tlb_info { struct sh_cpuinfo { enum cpu_type type; unsigned long loops_per_jiffy; + unsigned long asid_cache; - char hard_math; - - unsigned long *pgd_quick; - unsigned long *pmd_quick; - unsigned long *pte_quick; - unsigned long pgtable_cache_sz; unsigned int cpu_clock, master_clock, bus_clock, module_clock; /* Cache info */ struct cache_info icache; struct cache_info dcache; + struct cache_info scache; /* TLB info */ struct tlb_info itlb; -- cgit v1.2.3-70-g09d2 From 9b01bd9ee6408846c0553c03fb4b864353a845c9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 19:55:50 +0900 Subject: sh: Split out uaccess.h in to _32 and _64 variants. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess.h | 564 +------------------------------------------ include/asm-sh/uaccess_32.h | 575 ++++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/uaccess_64.h | 316 ++++++++++++++++++++++++ include/asm-sh64/uaccess.h | 316 ------------------------ 4 files changed, 894 insertions(+), 877 deletions(-) create mode 100644 include/asm-sh/uaccess_32.h create mode 100644 include/asm-sh/uaccess_64.h delete mode 100644 include/asm-sh64/uaccess.h (limited to 'include') diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h index 77c391fa93d..ff24ce95b23 100644 --- a/include/asm-sh/uaccess.h +++ b/include/asm-sh/uaccess.h @@ -1,563 +1,5 @@ -/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $ - * - * User space memory access functions - * - * Copyright (C) 1999, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - */ -#ifndef __ASM_SH_UACCESS_H -#define __ASM_SH_UACCESS_H - -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define get_ds() (KERNEL_DS) - -#if !defined(CONFIG_MMU) -/* NOMMU is always true */ -#define __addr_ok(addr) (1) - -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline void set_fs(mm_segment_t s) -{ -} - -/* - * __access_ok: Check if address with size is OK or not. - * - * If we don't have an MMU (or if its disabled) the only thing we really have - * to look out for is if the address resides somewhere outside of what - * available RAM we have. - * - * TODO: This check could probably also stand to be restricted somewhat more.. - * though it still does the Right Thing(tm) for the time being. - */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - return ((addr >= memory_start) && ((addr + size) < memory_end)); -} -#else /* CONFIG_MMU */ -#define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) - -/* - * __access_ok: Check if address with size is OK or not. - * - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - unsigned long flag, sum; - - __asm__("clrt\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "cmp/hi %4, %1\n\t" - "rotcl %0" - :"=&r" (flag), "=r" (sum) - :"1" (addr), "r" (size), - "r" (current_thread_info()->addr_limit.seg) - :"t"); - return flag == 0; - -} -#endif /* CONFIG_MMU */ - -static inline int access_ok(int type, const void __user *p, unsigned long size) -{ - unsigned long addr = (unsigned long)p; - return __access_ok(addr, size); -} - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As SuperH uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: \ - __get_user_asm(x, ptr, retval, "b"); \ - break; \ - case 2: \ - __get_user_asm(x, ptr, retval, "w"); \ - break; \ - case 4: \ - __get_user_asm(x, ptr, retval, "l"); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#ifdef CONFIG_MMU -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: \ - __get_user_1(__gu_val, (ptr), __gu_err); \ - break; \ - case 2: \ - __get_user_2(__gu_val, (ptr), __gu_err); \ - break; \ - case 4: \ - __get_user_4(__gu_val, (ptr), __gu_err); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ - \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_1(x,addr,err) ({ \ -__asm__("stc r7_bank, %1\n\t" \ - "mov.l @(8,%1), %1\n\t" \ - "and %2, %1\n\t" \ - "cmp/pz %1\n\t" \ - "bt/s 1f\n\t" \ - " mov #0, %0\n\t" \ - "0:\n" \ - "mov #-14, %0\n\t" \ - "bra 2f\n\t" \ - " mov #0, %1\n" \ - "1:\n\t" \ - "mov.b @%2, %1\n\t" \ - "extu.b %1, %1\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 0b\n\t" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr) \ - : "t"); \ -}) - -#define __get_user_2(x,addr,err) ({ \ -__asm__("stc r7_bank, %1\n\t" \ - "mov.l @(8,%1), %1\n\t" \ - "and %2, %1\n\t" \ - "cmp/pz %1\n\t" \ - "bt/s 1f\n\t" \ - " mov #0, %0\n\t" \ - "0:\n" \ - "mov #-14, %0\n\t" \ - "bra 2f\n\t" \ - " mov #0, %1\n" \ - "1:\n\t" \ - "mov.w @%2, %1\n\t" \ - "extu.w %1, %1\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 0b\n\t" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr) \ - : "t"); \ -}) - -#define __get_user_4(x,addr,err) ({ \ -__asm__("stc r7_bank, %1\n\t" \ - "mov.l @(8,%1), %1\n\t" \ - "and %2, %1\n\t" \ - "cmp/pz %1\n\t" \ - "bt/s 1f\n\t" \ - " mov #0, %0\n\t" \ - "0:\n" \ - "mov #-14, %0\n\t" \ - "bra 2f\n\t" \ - " mov #0, %1\n" \ - "1:\n\t" \ - "mov.l @%2, %1\n\t" \ - "2:\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 0b\n\t" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr) \ - : "t"); \ -}) -#else /* CONFIG_MMU */ -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - if (__access_ok((unsigned long)(ptr), (size))) { \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - } else \ - __gu_err = -EFAULT; \ - __gu_err; \ -}) -#endif - -#define __get_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %2, %1\n\t" \ - "mov #0, %0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov #0, %1\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err), "=&r" (x) \ - :"m" (__m(addr)), "i" (-EFAULT)); }) - -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: \ - __put_user_asm(x, ptr, retval, "b"); \ - break; \ - case 2: \ - __put_user_asm(x, ptr, retval, "w"); \ - break; \ - case 4: \ - __put_user_asm(x, ptr, retval, "l"); \ - break; \ - case 8: \ - __put_user_u64(x, ptr, retval); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - \ - if (__access_ok((unsigned long)__pu_addr,size)) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - __pu_err; \ -}) - -#define __put_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %1, %2\n\t" \ - "mov #0, %0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "nop\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - "mov %3, %0\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err) \ - :"r" (x), "m" (__m(addr)), "i" (-EFAULT) \ - :"memory"); }) - -#if defined(__LITTLE_ENDIAN__) -#define __put_user_u64(val,addr,retval) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov.l %R1,%2\n\t" \ - "mov.l %S1,%T2\n\t" \ - "mov #0,%0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "nop\n\t" \ - "mov.l 4f,%0\n\t" \ - "jmp @%0\n\t" \ - " mov %3,%0\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \ - : "memory"); }) +#ifdef CONFIG_SUPERH32 +# include "uaccess_32.h" #else -#define __put_user_u64(val,addr,retval) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov.l %S1,%2\n\t" \ - "mov.l %R1,%T2\n\t" \ - "mov #0,%0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "nop\n\t" \ - "mov.l 4f,%0\n\t" \ - "jmp @%0\n\t" \ - " mov %3,%0\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \ - : "memory"); }) +# include "uaccess_64.h" #endif - -extern void __put_user_unknown(void); - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); - -#define copy_to_user(to,from,n) ({ \ -void *__copy_to = (void *) (to); \ -__kernel_size_t __copy_size = (__kernel_size_t) (n); \ -__kernel_size_t __copy_res; \ -if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \ -__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \ -} else __copy_res = __copy_size; \ -__copy_res; }) - -#define copy_from_user(to,from,n) ({ \ -void *__copy_to = (void *) (to); \ -void *__copy_from = (void *) (from); \ -__kernel_size_t __copy_size = (__kernel_size_t) (n); \ -__kernel_size_t __copy_res; \ -if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \ -__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \ -} else __copy_res = __copy_size; \ -__copy_res; }) - -static __always_inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user(to, (__force void *)from, n); -} - -static __always_inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user((__force void *)to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * Clear the area and return remaining number of bytes - * (on failure. Usually it's 0.) - */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -static __inline__ int -__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) -{ - __kernel_size_t res; - unsigned long __dummy, _d, _s; - - __asm__ __volatile__( - "9:\n" - "mov.b @%2+, %1\n\t" - "cmp/eq #0, %1\n\t" - "bt/s 2f\n" - "1:\n" - "mov.b %1, @%3\n\t" - "dt %7\n\t" - "bf/s 9b\n\t" - " add #1, %3\n\t" - "2:\n\t" - "sub %7, %0\n" - "3:\n" - ".section .fixup,\"ax\"\n" - "4:\n\t" - "mov.l 5f, %1\n\t" - "jmp @%1\n\t" - " mov %8, %0\n\t" - ".balign 4\n" - "5: .long 3b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 9b,4b\n" - ".previous" - : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d) - : "0" (__count), "2" (__src), "3" (__dest), "r" (__count), - "i" (-EFAULT) - : "memory", "t"); - - return res; -} - -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - -/* - * Return the size of a string (including the ending 0!) - */ -static __inline__ long __strnlen_user(const char __user *__s, long __n) -{ - unsigned long res; - unsigned long __dummy; - - __asm__ __volatile__( - "9:\n" - "cmp/eq %4, %0\n\t" - "bt 2f\n" - "1:\t" - "mov.b @(%0,%3), %1\n\t" - "tst %1, %1\n\t" - "bf/s 9b\n\t" - " add #1, %0\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3:\n\t" - "mov.l 4f, %1\n\t" - "jmp @%1\n\t" - " mov #0, %0\n" - ".balign 4\n" - "4: .long 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 1b,3b\n" - ".previous" - : "=z" (res), "=&r" (__dummy) - : "0" (0), "r" (__s), "r" (__n) - : "t"); - return res; -} - -static __inline__ long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - -#endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h new file mode 100644 index 00000000000..f18a1a5c95c --- /dev/null +++ b/include/asm-sh/uaccess_32.h @@ -0,0 +1,575 @@ +/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $ + * + * User space memory access functions + * + * Copyright (C) 1999, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + */ +#ifndef __ASM_SH_UACCESS_H +#define __ASM_SH_UACCESS_H + +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons (Data Segment Register?), these macros are misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#if !defined(CONFIG_MMU) +/* NOMMU is always true */ +#define __addr_ok(addr) (1) + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline void set_fs(mm_segment_t s) +{ +} + +/* + * __access_ok: Check if address with size is OK or not. + * + * If we don't have an MMU (or if its disabled) the only thing we really have + * to look out for is if the address resides somewhere outside of what + * available RAM we have. + * + * TODO: This check could probably also stand to be restricted somewhat more.. + * though it still does the Right Thing(tm) for the time being. + */ +static inline int __access_ok(unsigned long addr, unsigned long size) +{ + return ((addr >= memory_start) && ((addr + size) < memory_end)); +} +#else /* CONFIG_MMU */ +#define __addr_ok(addr) \ + ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +/* + * __access_ok: Check if address with size is OK or not. + * + * We do three checks: + * (1) is it user space? + * (2) addr + size --> carry? + * (3) addr + size >= 0x80000000 (PAGE_OFFSET) + * + * (1) (2) (3) | RESULT + * 0 0 0 | ok + * 0 0 1 | ok + * 0 1 0 | bad + * 0 1 1 | bad + * 1 0 0 | ok + * 1 0 1 | bad + * 1 1 0 | bad + * 1 1 1 | bad + */ +static inline int __access_ok(unsigned long addr, unsigned long size) +{ + unsigned long flag, tmp; + + __asm__("stc r7_bank, %0\n\t" + "mov.l @(8,%0), %0\n\t" + "clrt\n\t" + "addc %2, %1\n\t" + "and %1, %0\n\t" + "rotcl %0\n\t" + "rotcl %0\n\t" + "and #3, %0" + : "=&z" (flag), "=r" (tmp) + : "r" (addr), "1" (size) + : "t"); + + return flag == 0; +} +#endif /* CONFIG_MMU */ + +static inline int access_ok(int type, const void __user *p, unsigned long size) +{ + unsigned long addr = (unsigned long)p; + return __access_ok(addr, size); +} + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) \ + __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: \ + __get_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __get_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __get_user_asm(x, ptr, retval, "l"); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#ifdef CONFIG_MMU +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: \ + __get_user_1(__gu_val, (ptr), __gu_err); \ + break; \ + case 2: \ + __get_user_2(__gu_val, (ptr), __gu_err); \ + break; \ + case 4: \ + __get_user_4(__gu_val, (ptr), __gu_err); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ + \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_1(x,addr,err) ({ \ +__asm__("stc r7_bank, %1\n\t" \ + "mov.l @(8,%1), %1\n\t" \ + "and %2, %1\n\t" \ + "cmp/pz %1\n\t" \ + "bt/s 1f\n\t" \ + " mov #0, %0\n\t" \ + "0:\n" \ + "mov #-14, %0\n\t" \ + "bra 2f\n\t" \ + " mov #0, %1\n" \ + "1:\n\t" \ + "mov.b @%2, %1\n\t" \ + "extu.b %1, %1\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 0b\n\t" \ + ".previous" \ + : "=&r" (err), "=&r" (x) \ + : "r" (addr) \ + : "t"); \ +}) + +#define __get_user_2(x,addr,err) ({ \ +__asm__("stc r7_bank, %1\n\t" \ + "mov.l @(8,%1), %1\n\t" \ + "and %2, %1\n\t" \ + "cmp/pz %1\n\t" \ + "bt/s 1f\n\t" \ + " mov #0, %0\n\t" \ + "0:\n" \ + "mov #-14, %0\n\t" \ + "bra 2f\n\t" \ + " mov #0, %1\n" \ + "1:\n\t" \ + "mov.w @%2, %1\n\t" \ + "extu.w %1, %1\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 0b\n\t" \ + ".previous" \ + : "=&r" (err), "=&r" (x) \ + : "r" (addr) \ + : "t"); \ +}) + +#define __get_user_4(x,addr,err) ({ \ +__asm__("stc r7_bank, %1\n\t" \ + "mov.l @(8,%1), %1\n\t" \ + "and %2, %1\n\t" \ + "cmp/pz %1\n\t" \ + "bt/s 1f\n\t" \ + " mov #0, %0\n\t" \ + "0:\n" \ + "mov #-14, %0\n\t" \ + "bra 2f\n\t" \ + " mov #0, %1\n" \ + "1:\n\t" \ + "mov.l @%2, %1\n\t" \ + "2:\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 0b\n\t" \ + ".previous" \ + : "=&r" (err), "=&r" (x) \ + : "r" (addr) \ + : "t"); \ +}) +#else /* CONFIG_MMU */ +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + if (__access_ok((unsigned long)(ptr), (size))) { \ + __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + } else \ + __gu_err = -EFAULT; \ + __gu_err; \ +}) +#endif + +#define __get_user_asm(x, addr, err, insn) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov." insn " %2, %1\n\t" \ + "mov #0, %0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov #0, %1\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + :"=&r" (err), "=&r" (x) \ + :"m" (__m(addr)), "i" (-EFAULT)); }) + +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: \ + __put_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __put_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __put_user_asm(x, ptr, retval, "l"); \ + break; \ + case 8: \ + __put_user_u64(x, ptr, retval); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __put_user_size((x),(ptr),(size),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + \ + if (__access_ok((unsigned long)__pu_addr,size)) \ + __put_user_size((x),__pu_addr,(size),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_asm(x, addr, err, insn) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "mov #0, %0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "nop\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + "mov %3, %0\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + :"=&r" (err) \ + :"r" (x), "m" (__m(addr)), "i" (-EFAULT) \ + :"memory"); }) + +#if defined(__LITTLE_ENDIAN__) +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %R1,%2\n\t" \ + "mov.l %S1,%T2\n\t" \ + "mov #0,%0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "nop\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \ + : "memory"); }) +#else +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %S1,%2\n\t" \ + "mov.l %R1,%T2\n\t" \ + "mov #0,%0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "nop\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \ + : "memory"); }) +#endif + +extern void __put_user_unknown(void); + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +#define copy_to_user(to,from,n) ({ \ +void *__copy_to = (void *) (to); \ +__kernel_size_t __copy_size = (__kernel_size_t) (n); \ +__kernel_size_t __copy_res; \ +if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \ +__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \ +} else __copy_res = __copy_size; \ +__copy_res; }) + +#define copy_from_user(to,from,n) ({ \ +void *__copy_to = (void *) (to); \ +void *__copy_from = (void *) (from); \ +__kernel_size_t __copy_size = (__kernel_size_t) (n); \ +__kernel_size_t __copy_res; \ +if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \ +__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \ +} else __copy_res = __copy_size; \ +__copy_res; }) + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) ({ \ +void * __cl_addr = (addr); \ +unsigned long __cl_size = (n); \ +if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ +__cl_size = __clear_user(__cl_addr, __cl_size); \ +__cl_size; }) + +static __inline__ int +__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) +{ + __kernel_size_t res; + unsigned long __dummy, _d, _s; + + __asm__ __volatile__( + "9:\n" + "mov.b @%2+, %1\n\t" + "cmp/eq #0, %1\n\t" + "bt/s 2f\n" + "1:\n" + "mov.b %1, @%3\n\t" + "dt %7\n\t" + "bf/s 9b\n\t" + " add #1, %3\n\t" + "2:\n\t" + "sub %7, %0\n" + "3:\n" + ".section .fixup,\"ax\"\n" + "4:\n\t" + "mov.l 5f, %1\n\t" + "jmp @%1\n\t" + " mov %8, %0\n\t" + ".balign 4\n" + "5: .long 3b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 9b,4b\n" + ".previous" + : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d) + : "0" (__count), "2" (__src), "3" (__dest), "r" (__count), + "i" (-EFAULT) + : "memory", "t"); + + return res; +} + +#define strncpy_from_user(dest,src,count) ({ \ +unsigned long __sfu_src = (unsigned long) (src); \ +int __sfu_count = (int) (count); \ +long __sfu_res = -EFAULT; \ +if(__access_ok(__sfu_src, __sfu_count)) { \ +__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ +} __sfu_res; }) + +/* + * Return the size of a string (including the ending 0!) + */ +static __inline__ long __strnlen_user(const char __user *__s, long __n) +{ + unsigned long res; + unsigned long __dummy; + + __asm__ __volatile__( + "9:\n" + "cmp/eq %4, %0\n\t" + "bt 2f\n" + "1:\t" + "mov.b @(%0,%3), %1\n\t" + "tst %1, %1\n\t" + "bf/s 9b\n\t" + " add #1, %0\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3:\n\t" + "mov.l 4f, %1\n\t" + "jmp @%1\n\t" + " mov #0, %0\n" + ".balign 4\n" + "4: .long 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 1b,3b\n" + ".previous" + : "=z" (res), "=&r" (__dummy) + : "0" (0), "r" (__s), "r" (__n) + : "t"); + return res; +} + +static __inline__ long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +extern int fixup_exception(struct pt_regs *regs); + +#endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h new file mode 100644 index 00000000000..644c67b65f9 --- /dev/null +++ b/include/asm-sh/uaccess_64.h @@ -0,0 +1,316 @@ +#ifndef __ASM_SH64_UACCESS_H +#define __ASM_SH64_UACCESS_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/uaccess.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * User space memory access functions + * + * Copyright (C) 1999 Niibe Yutaka + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + * + */ + +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons (Data Segment Register?), these macros are misnamed. + */ + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) +#define USER_DS MAKE_MM_SEG(0x80000000) + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit=(x)) + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) + +/* + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1) + +#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) +#define __access_ok(addr,size) (__range_ok(addr,size) == 0) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As MIPS uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) + +/* + * The "xxx_ret" versions return constant specified in third argument, if + * something bad happens. These macros can be optimized for the + * case of just returning from the function xxx_ret is used. + */ + +#define put_user_ret(x,ptr,ret) ({ \ +if (put_user(x,ptr)) return ret; }) + +#define get_user_ret(x,ptr,ret) ({ \ +if (get_user(x,ptr)) return ret; }) + +#define __put_user_ret(x,ptr,ret) ({ \ +if (__put_user(x,ptr)) return ret; }) + +#define __get_user_ret(x,ptr,ret) ({ \ +if (__get_user(x,ptr)) return ret; }) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __get_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __get_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __get_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __get_user_asm_q(x, ptr); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err, __gu_val; \ + __get_user_size((void *)&__gu_val, (long)(ptr), \ + (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_addr = (long)(ptr); \ + long __gu_err = -EFAULT, __gu_val; \ + if (__access_ok(__gu_addr, (size))) \ + __get_user_size((void *)&__gu_val, __gu_addr, \ + (size), __gu_err); \ + (x) = (__typeof__(*(ptr))) __gu_val; \ + __gu_err; \ +}) + +extern long __get_user_asm_b(void *, long); +extern long __get_user_asm_w(void *, long); +extern long __get_user_asm_l(void *, long); +extern long __get_user_asm_q(void *, long); +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __put_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __put_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __put_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __put_user_asm_q(x, ptr); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __pu_val = (x); \ + __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + long __pu_addr = (long)(ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + \ + if (__access_ok(__pu_addr, (size))) \ + __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\ + __pu_err; \ +}) + +extern long __put_user_asm_b(void *, long); +extern long __put_user_asm_w(void *, long); +extern long __put_user_asm_l(void *, long); +extern long __put_user_asm_q(void *, long); +extern void __put_user_unknown(void); + + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +/* XXX: should be such that: 4byte and the rest. */ +extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n); + +#define copy_to_user(to,from,n) ({ \ +void *__copy_to = (void *) (to); \ +__kernel_size_t __copy_size = (__kernel_size_t) (n); \ +__kernel_size_t __copy_res; \ +if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \ +__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \ +} else __copy_res = __copy_size; \ +__copy_res; }) + +#define copy_to_user_ret(to,from,n,retval) ({ \ +if (copy_to_user(to,from,n)) \ + return retval; \ +}) + +#define __copy_to_user(to,from,n) \ + __copy_user((void *)(to), \ + (void *)(from), n) + +#define __copy_to_user_ret(to,from,n,retval) ({ \ +if (__copy_to_user(to,from,n)) \ + return retval; \ +}) + +#define copy_from_user(to,from,n) ({ \ +void *__copy_to = (void *) (to); \ +void *__copy_from = (void *) (from); \ +__kernel_size_t __copy_size = (__kernel_size_t) (n); \ +__kernel_size_t __copy_res; \ +if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \ +__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \ +} else __copy_res = __copy_size; \ +__copy_res; }) + +#define copy_from_user_ret(to,from,n,retval) ({ \ +if (copy_from_user(to,from,n)) \ + return retval; \ +}) + +#define __copy_from_user(to,from,n) \ + __copy_user((void *)(to), \ + (void *)(from), n) + +#define __copy_from_user_ret(to,from,n,retval) ({ \ +if (__copy_from_user(to,from,n)) \ + return retval; \ +}) + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* XXX: Not sure it works well.. + should be such that: 4byte clear and the rest. */ +extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) ({ \ +void * __cl_addr = (addr); \ +unsigned long __cl_size = (n); \ +if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ +__cl_size = __clear_user(__cl_addr, __cl_size); \ +__cl_size; }) + +extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count); + +#define strncpy_from_user(dest,src,count) ({ \ +unsigned long __sfu_src = (unsigned long) (src); \ +int __sfu_count = (int) (count); \ +long __sfu_res = -EFAULT; \ +if(__access_ok(__sfu_src, __sfu_count)) { \ +__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ +} __sfu_res; }) + +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * Return the size of a string (including the ending 0!) + */ +extern long __strnlen_user(const char *__s, long __n); + +static inline long strnlen_user(const char *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +#define ARCH_HAS_SEARCH_EXTABLE + +/* If gcc inlines memset, it will use st.q instructions. Therefore, we need + kmalloc allocations to be 8-byte aligned. Without this, the alignment + becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on + sh64 at the moment). */ +#define ARCH_KMALLOC_MINALIGN 8 + +/* + * We want 8-byte alignment for the slab caches as well, otherwise we have + * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create(). + */ +#define ARCH_SLAB_MINALIGN 8 + +/* Returns 0 if exception not found and fixup.unit otherwise. */ +extern unsigned long search_exception_table(unsigned long addr); +extern const struct exception_table_entry *search_exception_tables (unsigned long addr); + +#endif /* __ASM_SH64_UACCESS_H */ diff --git a/include/asm-sh64/uaccess.h b/include/asm-sh64/uaccess.h deleted file mode 100644 index 644c67b65f9..00000000000 --- a/include/asm-sh64/uaccess.h +++ /dev/null @@ -1,316 +0,0 @@ -#ifndef __ASM_SH64_UACCESS_H -#define __ASM_SH64_UACCESS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/uaccess.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * User space memory access functions - * - * Copyright (C) 1999 Niibe Yutaka - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - * - */ - -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(0x80000000) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit=(x)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1) - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) -#define __access_ok(addr,size) (__range_ok(addr,size) == 0) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As MIPS uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x,ptr,ret) ({ \ -if (put_user(x,ptr)) return ret; }) - -#define get_user_ret(x,ptr,ret) ({ \ -if (get_user(x,ptr)) return ret; }) - -#define __put_user_ret(x,ptr,ret) ({ \ -if (__put_user(x,ptr)) return ret; }) - -#define __get_user_ret(x,ptr,ret) ({ \ -if (__get_user(x,ptr)) return ret; }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __get_user_asm_b(x, ptr); \ - break; \ - case 2: \ - retval = __get_user_asm_w(x, ptr); \ - break; \ - case 4: \ - retval = __get_user_asm_l(x, ptr); \ - break; \ - case 8: \ - retval = __get_user_asm_q(x, ptr); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size((void *)&__gu_val, (long)(ptr), \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_addr = (long)(ptr); \ - long __gu_err = -EFAULT, __gu_val; \ - if (__access_ok(__gu_addr, (size))) \ - __get_user_size((void *)&__gu_val, __gu_addr, \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - -extern long __get_user_asm_b(void *, long); -extern long __get_user_asm_w(void *, long); -extern long __get_user_asm_l(void *, long); -extern long __get_user_asm_q(void *, long); -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __put_user_asm_b(x, ptr); \ - break; \ - case 2: \ - retval = __put_user_asm_w(x, ptr); \ - break; \ - case 4: \ - retval = __put_user_asm_l(x, ptr); \ - break; \ - case 8: \ - retval = __put_user_asm_q(x, ptr); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __pu_val = (x); \ - __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - long __pu_addr = (long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - \ - if (__access_ok(__pu_addr, (size))) \ - __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\ - __pu_err; \ -}) - -extern long __put_user_asm_b(void *, long); -extern long __put_user_asm_w(void *, long); -extern long __put_user_asm_l(void *, long); -extern long __put_user_asm_q(void *, long); -extern void __put_user_unknown(void); - - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -/* XXX: should be such that: 4byte and the rest. */ -extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n); - -#define copy_to_user(to,from,n) ({ \ -void *__copy_to = (void *) (to); \ -__kernel_size_t __copy_size = (__kernel_size_t) (n); \ -__kernel_size_t __copy_res; \ -if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \ -__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \ -} else __copy_res = __copy_size; \ -__copy_res; }) - -#define copy_to_user_ret(to,from,n,retval) ({ \ -if (copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_to_user_ret(to,from,n,retval) ({ \ -if (__copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define copy_from_user(to,from,n) ({ \ -void *__copy_to = (void *) (to); \ -void *__copy_from = (void *) (from); \ -__kernel_size_t __copy_size = (__kernel_size_t) (n); \ -__kernel_size_t __copy_res; \ -if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \ -__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \ -} else __copy_res = __copy_size; \ -__copy_res; }) - -#define copy_from_user_ret(to,from,n,retval) ({ \ -if (copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_from_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_from_user_ret(to,from,n,retval) ({ \ -if (__copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* XXX: Not sure it works well.. - should be such that: 4byte clear and the rest. */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count); - -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * Return the size of a string (including the ending 0!) - */ -extern long __strnlen_user(const char *__s, long __n); - -static inline long strnlen_user(const char *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -#define ARCH_HAS_SEARCH_EXTABLE - -/* If gcc inlines memset, it will use st.q instructions. Therefore, we need - kmalloc allocations to be 8-byte aligned. Without this, the alignment - becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on - sh64 at the moment). */ -#define ARCH_KMALLOC_MINALIGN 8 - -/* - * We want 8-byte alignment for the slab caches as well, otherwise we have - * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create(). - */ -#define ARCH_SLAB_MINALIGN 8 - -/* Returns 0 if exception not found and fixup.unit otherwise. */ -extern unsigned long search_exception_table(unsigned long addr); -extern const struct exception_table_entry *search_exception_tables (unsigned long addr); - -#endif /* __ASM_SH64_UACCESS_H */ -- cgit v1.2.3-70-g09d2 From 01fed9311ab8a724283b3f456c12e573cb51d92b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 19:57:58 +0900 Subject: sh: Consolidate slab/kmalloc minalign values. Signed-off-by: Paul Mundt --- include/asm-sh/page.h | 14 ++++++++++++++ include/asm-sh/uaccess_64.h | 12 ------------ 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index d00a8fde7c7..d0273dbce6b 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -157,8 +157,22 @@ typedef struct { unsigned long pgd; } pgd_t; * Slub defaults to 8-byte alignment, we're only interested in 4. * Slab defaults to BYTES_PER_WORD, which ends up being the same anyways. */ +#ifdef CONFIG_SUPERH32 #define ARCH_KMALLOC_MINALIGN 4 #define ARCH_SLAB_MINALIGN 4 +#else +/* If gcc inlines memset, it will use st.q instructions. Therefore, we need + kmalloc allocations to be 8-byte aligned. Without this, the alignment + becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on + sh64 at the moment). */ +#define ARCH_KMALLOC_MINALIGN 8 + +/* + * We want 8-byte alignment for the slab caches as well, otherwise we have + * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create(). + */ +#define ARCH_SLAB_MINALIGN 8 +#endif #endif /* __KERNEL__ */ #endif /* __ASM_SH_PAGE_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index 644c67b65f9..24800a8045c 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -297,18 +297,6 @@ struct exception_table_entry #define ARCH_HAS_SEARCH_EXTABLE -/* If gcc inlines memset, it will use st.q instructions. Therefore, we need - kmalloc allocations to be 8-byte aligned. Without this, the alignment - becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on - sh64 at the moment). */ -#define ARCH_KMALLOC_MINALIGN 8 - -/* - * We want 8-byte alignment for the slab caches as well, otherwise we have - * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create(). - */ -#define ARCH_SLAB_MINALIGN 8 - /* Returns 0 if exception not found and fixup.unit otherwise. */ extern unsigned long search_exception_table(unsigned long addr); extern const struct exception_table_entry *search_exception_tables (unsigned long addr); -- cgit v1.2.3-70-g09d2 From 76168c21b78a0bd684d4687d14a2bd76bcf92762 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:01:51 +0900 Subject: sh: More SH-5 cpuinfo tidying. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/cache.h | 4 ++++ include/asm-sh/processor.h | 2 ++ include/asm-sh/processor_32.h | 1 - include/asm-sh/processor_64.h | 10 ++++++---- 4 files changed, 12 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/cache.h b/include/asm-sh/cpu-sh5/cache.h index 2d1f9c28b92..7eaa8894649 100644 --- a/include/asm-sh/cpu-sh5/cache.h +++ b/include/asm-sh/cpu-sh5/cache.h @@ -19,6 +19,10 @@ #define SH_CACHE_VALID (1LL<<0) #define SH_CACHE_UPDATED (1LL<<57) +/* Unimplemented compat bits.. */ +#define SH_CACHE_COMBINED 0 +#define SH_CACHE_ASSOC 0 + /* Cache flags */ #define SH_CACHE_MODE_WT (1LL<<0) #define SH_CACHE_MODE_WB (1LL<<1) diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index bf01f486c3e..b98c882d503 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -1,6 +1,8 @@ #ifndef __ASM_SH_PROCESSOR_H #define __ASM_SH_PROCESSOR_H +#include + /* * CPU type and hardware bug flags. Kept separately for each CPU. * diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index e10d0ee0c22..35040fe43e5 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -14,7 +14,6 @@ #include #include #include -#include /* * Default implementation of macro that returns current diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index 6ad23387d7b..ecd6b403f7d 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -66,12 +66,14 @@ struct sh_cpuinfo { /* TLB info */ struct tlb_info itlb; struct tlb_info dtlb; -}; -extern struct sh_cpuinfo boot_cpu_data; + unsigned long flags; +}; -#define cpu_data (&boot_cpu_data) -#define current_cpu_data boot_cpu_data +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] #endif -- cgit v1.2.3-70-g09d2 From f7a7b15344e2bccdd1c73d42685edfe7d43ec5b7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:07:57 +0900 Subject: sh: Move in the SH-5 signal trampoline impl. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_32 | 2 +- arch/sh/kernel/Makefile_64 | 2 +- arch/sh/kernel/signal.c | 629 ------------------------------------ arch/sh/kernel/signal_32.c | 629 ++++++++++++++++++++++++++++++++++++ arch/sh/kernel/signal_64.c | 754 ++++++++++++++++++++++++++++++++++++++++++++ arch/sh64/kernel/signal.c | 750 ------------------------------------------- include/asm-sh/sigcontext.h | 13 + 7 files changed, 1398 insertions(+), 1381 deletions(-) delete mode 100644 arch/sh/kernel/signal.c create mode 100644 arch/sh/kernel/signal_32.c create mode 100644 arch/sh/kernel/signal_64.c delete mode 100644 arch/sh64/kernel/signal.c (limited to 'include') diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 54b5a2da562..bad6bf5ac47 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -5,7 +5,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ - ptrace_32.o semaphore.o setup.o signal.o sys_sh.o syscalls.o \ + ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o syscalls.o \ time.o topology.o traps.o obj-y += cpu/ timers/ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index 7dc995d6fde..5f2711ae546 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -1,7 +1,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ - ptrace_64.o semaphore.o setup.o signal.o sys_sh.o syscalls.o \ + ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o syscalls.o \ time.o topology.o traps.o obj-y += cpu/ timers/ diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c deleted file mode 100644 index ca754fd4243..00000000000 --- a/arch/sh/kernel/signal.c +++ /dev/null @@ -1,629 +0,0 @@ -/* - * linux/arch/sh/kernel/signal.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson - * - * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - -/* - * Atomically swap in the new signal mask, and wait for a signal. - */ -asmlinkage int -sys_sigsuspend(old_sigset_t mask, - unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - current->state = TASK_INTERRUPTIBLE; - schedule(); - set_thread_flag(TIF_RESTORE_SIGMASK); - return -ERESTARTNOHAND; -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction __user *act, - struct old_sigaction __user *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) - return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); - siginitset(&new_ka.sa.sa_mask, mask); - } - - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) - return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); - } - - return ret; -} - -asmlinkage int -sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - - return do_sigaltstack(uss, uoss, regs->regs[15]); -} - - -/* - * Do a signal return; undo the signal stack. - */ - -#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */ -#if defined(CONFIG_CPU_SH2) -#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */ -#else -#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */ -#endif -#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */ - -struct sigframe -{ - struct sigcontext sc; - unsigned long extramask[_NSIG_WORDS-1]; - u16 retcode[8]; -}; - -struct rt_sigframe -{ - struct siginfo info; - struct ucontext uc; - u16 retcode[8]; -}; - -#ifdef CONFIG_SH_FPU -static inline int restore_sigcontext_fpu(struct sigcontext __user *sc) -{ - struct task_struct *tsk = current; - - if (!(current_cpu_data.flags & CPU_HAS_FPU)) - return 0; - - set_used_math(); - return __copy_from_user(&tsk->thread.fpu.hard, &sc->sc_fpregs[0], - sizeof(long)*(16*2+2)); -} - -static inline int save_sigcontext_fpu(struct sigcontext __user *sc, - struct pt_regs *regs) -{ - struct task_struct *tsk = current; - - if (!(current_cpu_data.flags & CPU_HAS_FPU)) - return 0; - - if (!used_math()) { - __put_user(0, &sc->sc_ownedfp); - return 0; - } - - __put_user(1, &sc->sc_ownedfp); - - /* This will cause a "finit" to be triggered by the next - attempted FPU operation by the 'current' process. - */ - clear_used_math(); - - unlazy_fpu(tsk, regs); - return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.fpu.hard, - sizeof(long)*(16*2+2)); -} -#endif /* CONFIG_SH_FPU */ - -static int -restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p) -{ - unsigned int err = 0; - -#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) - COPY(regs[1]); - COPY(regs[2]); COPY(regs[3]); - COPY(regs[4]); COPY(regs[5]); - COPY(regs[6]); COPY(regs[7]); - COPY(regs[8]); COPY(regs[9]); - COPY(regs[10]); COPY(regs[11]); - COPY(regs[12]); COPY(regs[13]); - COPY(regs[14]); COPY(regs[15]); - COPY(gbr); COPY(mach); - COPY(macl); COPY(pr); - COPY(sr); COPY(pc); -#undef COPY - -#ifdef CONFIG_SH_FPU - if (current_cpu_data.flags & CPU_HAS_FPU) { - int owned_fp; - struct task_struct *tsk = current; - - regs->sr |= SR_FD; /* Release FPU */ - clear_fpu(tsk, regs); - clear_used_math(); - __get_user (owned_fp, &sc->sc_ownedfp); - if (owned_fp) - err |= restore_sigcontext_fpu(sc); - } -#endif - - regs->tra = -1; /* disable syscall checks */ - err |= __get_user(*r0_p, &sc->sc_regs[0]); - return err; -} - -asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15]; - sigset_t set; - int r0; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__get_user(set.sig[0], &frame->sc.oldmask) - || (_NSIG_WORDS > 1 - && __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->sc, &r0)) - goto badframe; - return r0; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15]; - sigset_t set; - stack_t st; - int r0; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) - goto badframe; - - if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) - goto badframe; - /* It is more difficult to avoid calling this function than to - call it and ignore errors. */ - do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame); - - return r0; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -/* - * Set up a signal frame. - */ - -static int -setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, - unsigned long mask) -{ - int err = 0; - -#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) - COPY(regs[0]); COPY(regs[1]); - COPY(regs[2]); COPY(regs[3]); - COPY(regs[4]); COPY(regs[5]); - COPY(regs[6]); COPY(regs[7]); - COPY(regs[8]); COPY(regs[9]); - COPY(regs[10]); COPY(regs[11]); - COPY(regs[12]); COPY(regs[13]); - COPY(regs[14]); COPY(regs[15]); - COPY(gbr); COPY(mach); - COPY(macl); COPY(pr); - COPY(sr); COPY(pc); -#undef COPY - -#ifdef CONFIG_SH_FPU - err |= save_sigcontext_fpu(sc, regs); -#endif - - /* non-iBCS2 extensions.. */ - err |= __put_user(mask, &sc->oldmask); - - return err; -} - -/* - * Determine which stack to use.. - */ -static inline void __user * -get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) -{ - if (ka->sa.sa_flags & SA_ONSTACK) { - if (sas_ss_flags(sp) == 0) - sp = current->sas_ss_sp + current->sas_ss_size; - } - - return (void __user *)((sp - frame_size) & -8ul); -} - -/* These symbols are defined with the addresses in the vsyscall page. - See vsyscall-trapa.S. */ -extern void __user __kernel_sigreturn; -extern void __user __kernel_rt_sigreturn; - -static int setup_frame(int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs *regs) -{ - struct sigframe __user *frame; - int err = 0; - int signal; - - frame = get_sigframe(ka, regs->regs[15], sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - signal = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; - - err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); - - if (_NSIG_WORDS > 1) - err |= __copy_to_user(frame->extramask, &set->sig[1], - sizeof(frame->extramask)); - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - if (ka->sa.sa_flags & SA_RESTORER) { - regs->pr = (unsigned long) ka->sa.sa_restorer; -#ifdef CONFIG_VSYSCALL - } else if (likely(current->mm->context.vdso)) { - regs->pr = VDSO_SYM(&__kernel_sigreturn); -#endif - } else { - /* Generate return code (system call to sigreturn) */ - err |= __put_user(MOVW(7), &frame->retcode[0]); - err |= __put_user(TRAP_NOARG, &frame->retcode[1]); - err |= __put_user(OR_R0_R0, &frame->retcode[2]); - err |= __put_user(OR_R0_R0, &frame->retcode[3]); - err |= __put_user(OR_R0_R0, &frame->retcode[4]); - err |= __put_user(OR_R0_R0, &frame->retcode[5]); - err |= __put_user(OR_R0_R0, &frame->retcode[6]); - err |= __put_user((__NR_sigreturn), &frame->retcode[7]); - regs->pr = (unsigned long) frame->retcode; - } - - if (err) - goto give_sigsegv; - - /* Set up registers for signal handler */ - regs->regs[15] = (unsigned long) frame; - regs->regs[4] = signal; /* Arg for signal handler */ - regs->regs[5] = 0; - regs->regs[6] = (unsigned long) &frame->sc; - regs->pc = (unsigned long) ka->sa.sa_handler; - - set_fs(USER_DS); - - pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", - current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); - - return 0; - -give_sigsegv: - force_sigsegv(sig, current); - return -EFAULT; -} - -static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs) -{ - struct rt_sigframe __user *frame; - int err = 0; - int signal; - - frame = get_sigframe(ka, regs->regs[15], sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - signal = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; - - err |= copy_siginfo_to_user(&frame->info, info); - - /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user((void *)current->sas_ss_sp, - &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->regs[15]), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, - regs, set->sig[0]); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - if (ka->sa.sa_flags & SA_RESTORER) { - regs->pr = (unsigned long) ka->sa.sa_restorer; -#ifdef CONFIG_VSYSCALL - } else if (likely(current->mm->context.vdso)) { - regs->pr = VDSO_SYM(&__kernel_rt_sigreturn); -#endif - } else { - /* Generate return code (system call to rt_sigreturn) */ - err |= __put_user(MOVW(7), &frame->retcode[0]); - err |= __put_user(TRAP_NOARG, &frame->retcode[1]); - err |= __put_user(OR_R0_R0, &frame->retcode[2]); - err |= __put_user(OR_R0_R0, &frame->retcode[3]); - err |= __put_user(OR_R0_R0, &frame->retcode[4]); - err |= __put_user(OR_R0_R0, &frame->retcode[5]); - err |= __put_user(OR_R0_R0, &frame->retcode[6]); - err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]); - regs->pr = (unsigned long) frame->retcode; - } - - if (err) - goto give_sigsegv; - - /* Set up registers for signal handler */ - regs->regs[15] = (unsigned long) frame; - regs->regs[4] = signal; /* Arg for signal handler */ - regs->regs[5] = (unsigned long) &frame->info; - regs->regs[6] = (unsigned long) &frame->uc; - regs->pc = (unsigned long) ka->sa.sa_handler; - - set_fs(USER_DS); - - pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", - current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); - - return 0; - -give_sigsegv: - force_sigsegv(sig, current); - return -EFAULT; -} - -/* - * OK, we're invoking a handler - */ - -static int -handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *oldset, struct pt_regs *regs, unsigned int save_r0) -{ - int ret; - - /* Are we from a system call? */ - if (regs->tra >= 0) { - /* If so, check system call restarting.. */ - switch (regs->regs[0]) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->regs[0] = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[0] = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - regs->regs[0] = save_r0; - regs->pc -= instruction_size( - ctrl_inw(regs->pc - 4)); - break; - } -#ifdef CONFIG_GUSA - } else { - /* gUSA handling */ - preempt_disable(); - - if (regs->regs[15] >= 0xc0000000) { - int offset = (int)regs->regs[15]; - - /* Reset stack pointer: clear critical region mark */ - regs->regs[15] = regs->regs[1]; - if (regs->pc < regs->regs[0]) - /* Go to rewind point #1 */ - regs->pc = regs->regs[0] + offset - - instruction_size(ctrl_inw(regs->pc-4)); - } - - preempt_enable_no_resched(); -#endif - } - - /* Set up the stack frame */ - if (ka->sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(sig, ka, info, oldset, regs); - else - ret = setup_frame(sig, ka, oldset, regs); - - if (ka->sa.sa_flags & SA_ONESHOT) - ka->sa.sa_handler = SIG_DFL; - - if (ret == 0) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } - - return ret; -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -static void do_signal(struct pt_regs *regs, unsigned int save_r0) -{ - siginfo_t info; - int signr; - struct k_sigaction ka; - sigset_t *oldset; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (try_to_freeze()) - goto no_signal; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - if (handle_signal(signr, &ka, &info, oldset, - regs, save_r0) == 0) { - /* a signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - - return; - } - - no_signal: - /* Did we come from a system call? */ - if (regs->tra >= 0) { - /* Restart the system call - no handlers present */ - if (regs->regs[0] == -ERESTARTNOHAND || - regs->regs[0] == -ERESTARTSYS || - regs->regs[0] == -ERESTARTNOINTR) { - regs->regs[0] = save_r0; - regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); - } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) { - regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); - regs->regs[3] = __NR_restart_syscall; - } - } - - /* if there's no signal to deliver, we just put the saved sigmask - * back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } -} - -asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, - __u32 thread_info_flags) -{ - /* deal with pending signal delivery */ - if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) - do_signal(regs, save_r0); -} diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c new file mode 100644 index 00000000000..ca754fd4243 --- /dev/null +++ b/arch/sh/kernel/signal_32.c @@ -0,0 +1,629 @@ +/* + * linux/arch/sh/kernel/signal.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson + * + * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +asmlinkage int +sys_sigsuspend(old_sigset_t mask, + unsigned long r5, unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + current->saved_sigmask = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction __user *act, + struct old_sigaction __user *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + return do_sigaltstack(uss, uoss, regs->regs[15]); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +#define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */ +#if defined(CONFIG_CPU_SH2) +#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */ +#else +#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */ +#endif +#define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */ + +struct sigframe +{ + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS-1]; + u16 retcode[8]; +}; + +struct rt_sigframe +{ + struct siginfo info; + struct ucontext uc; + u16 retcode[8]; +}; + +#ifdef CONFIG_SH_FPU +static inline int restore_sigcontext_fpu(struct sigcontext __user *sc) +{ + struct task_struct *tsk = current; + + if (!(current_cpu_data.flags & CPU_HAS_FPU)) + return 0; + + set_used_math(); + return __copy_from_user(&tsk->thread.fpu.hard, &sc->sc_fpregs[0], + sizeof(long)*(16*2+2)); +} + +static inline int save_sigcontext_fpu(struct sigcontext __user *sc, + struct pt_regs *regs) +{ + struct task_struct *tsk = current; + + if (!(current_cpu_data.flags & CPU_HAS_FPU)) + return 0; + + if (!used_math()) { + __put_user(0, &sc->sc_ownedfp); + return 0; + } + + __put_user(1, &sc->sc_ownedfp); + + /* This will cause a "finit" to be triggered by the next + attempted FPU operation by the 'current' process. + */ + clear_used_math(); + + unlazy_fpu(tsk, regs); + return __copy_to_user(&sc->sc_fpregs[0], &tsk->thread.fpu.hard, + sizeof(long)*(16*2+2)); +} +#endif /* CONFIG_SH_FPU */ + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p) +{ + unsigned int err = 0; + +#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) + COPY(regs[1]); + COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); + COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); + COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); + COPY(regs[14]); COPY(regs[15]); + COPY(gbr); COPY(mach); + COPY(macl); COPY(pr); + COPY(sr); COPY(pc); +#undef COPY + +#ifdef CONFIG_SH_FPU + if (current_cpu_data.flags & CPU_HAS_FPU) { + int owned_fp; + struct task_struct *tsk = current; + + regs->sr |= SR_FD; /* Release FPU */ + clear_fpu(tsk, regs); + clear_used_math(); + __get_user (owned_fp, &sc->sc_ownedfp); + if (owned_fp) + err |= restore_sigcontext_fpu(sc); + } +#endif + + regs->tra = -1; /* disable syscall checks */ + err |= __get_user(*r0_p, &sc->sc_regs[0]); + return err; +} + +asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15]; + sigset_t set; + int r0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc, &r0)) + goto badframe; + return r0; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15]; + sigset_t set; + stack_t st; + int r0; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) + goto badframe; + + if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + goto badframe; + /* It is more difficult to avoid calling this function than to + call it and ignore errors. */ + do_sigaltstack((const stack_t __user *)&st, NULL, (unsigned long)frame); + + return r0; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + +#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) + COPY(regs[0]); COPY(regs[1]); + COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); + COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); + COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); + COPY(regs[14]); COPY(regs[15]); + COPY(gbr); COPY(mach); + COPY(macl); COPY(pr); + COPY(sr); COPY(pc); +#undef COPY + +#ifdef CONFIG_SH_FPU + err |= save_sigcontext_fpu(sc, regs); +#endif + + /* non-iBCS2 extensions.. */ + err |= __put_user(mask, &sc->oldmask); + + return err; +} + +/* + * Determine which stack to use.. + */ +static inline void __user * +get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) +{ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (sas_ss_flags(sp) == 0) + sp = current->sas_ss_sp + current->sas_ss_size; + } + + return (void __user *)((sp - frame_size) & -8ul); +} + +/* These symbols are defined with the addresses in the vsyscall page. + See vsyscall-trapa.S. */ +extern void __user __kernel_sigreturn; +extern void __user __kernel_rt_sigreturn; + +static int setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[15], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + + if (_NSIG_WORDS > 1) + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->pr = (unsigned long) ka->sa.sa_restorer; +#ifdef CONFIG_VSYSCALL + } else if (likely(current->mm->context.vdso)) { + regs->pr = VDSO_SYM(&__kernel_sigreturn); +#endif + } else { + /* Generate return code (system call to sigreturn) */ + err |= __put_user(MOVW(7), &frame->retcode[0]); + err |= __put_user(TRAP_NOARG, &frame->retcode[1]); + err |= __put_user(OR_R0_R0, &frame->retcode[2]); + err |= __put_user(OR_R0_R0, &frame->retcode[3]); + err |= __put_user(OR_R0_R0, &frame->retcode[4]); + err |= __put_user(OR_R0_R0, &frame->retcode[5]); + err |= __put_user(OR_R0_R0, &frame->retcode[6]); + err |= __put_user((__NR_sigreturn), &frame->retcode[7]); + regs->pr = (unsigned long) frame->retcode; + } + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->regs[15] = (unsigned long) frame; + regs->regs[4] = signal; /* Arg for signal handler */ + regs->regs[5] = 0; + regs->regs[6] = (unsigned long) &frame->sc; + regs->pc = (unsigned long) ka->sa.sa_handler; + + set_fs(USER_DS); + + pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", + current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); + + flush_cache_sigtramp(regs->pr); + + if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) + flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + + return 0; + +give_sigsegv: + force_sigsegv(sig, current); + return -EFAULT; +} + +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[15], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= copy_siginfo_to_user(&frame->info, info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->regs[15]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + regs->pr = (unsigned long) ka->sa.sa_restorer; +#ifdef CONFIG_VSYSCALL + } else if (likely(current->mm->context.vdso)) { + regs->pr = VDSO_SYM(&__kernel_rt_sigreturn); +#endif + } else { + /* Generate return code (system call to rt_sigreturn) */ + err |= __put_user(MOVW(7), &frame->retcode[0]); + err |= __put_user(TRAP_NOARG, &frame->retcode[1]); + err |= __put_user(OR_R0_R0, &frame->retcode[2]); + err |= __put_user(OR_R0_R0, &frame->retcode[3]); + err |= __put_user(OR_R0_R0, &frame->retcode[4]); + err |= __put_user(OR_R0_R0, &frame->retcode[5]); + err |= __put_user(OR_R0_R0, &frame->retcode[6]); + err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]); + regs->pr = (unsigned long) frame->retcode; + } + + if (err) + goto give_sigsegv; + + /* Set up registers for signal handler */ + regs->regs[15] = (unsigned long) frame; + regs->regs[4] = signal; /* Arg for signal handler */ + regs->regs[5] = (unsigned long) &frame->info; + regs->regs[6] = (unsigned long) &frame->uc; + regs->pc = (unsigned long) ka->sa.sa_handler; + + set_fs(USER_DS); + + pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", + current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); + + flush_cache_sigtramp(regs->pr); + + if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) + flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + + return 0; + +give_sigsegv: + force_sigsegv(sig, current); + return -EFAULT; +} + +/* + * OK, we're invoking a handler + */ + +static int +handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *oldset, struct pt_regs *regs, unsigned int save_r0) +{ + int ret; + + /* Are we from a system call? */ + if (regs->tra >= 0) { + /* If so, check system call restarting.. */ + switch (regs->regs[0]) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->regs[0] = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->regs[0] = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + regs->regs[0] = save_r0; + regs->pc -= instruction_size( + ctrl_inw(regs->pc - 4)); + break; + } +#ifdef CONFIG_GUSA + } else { + /* gUSA handling */ + preempt_disable(); + + if (regs->regs[15] >= 0xc0000000) { + int offset = (int)regs->regs[15]; + + /* Reset stack pointer: clear critical region mark */ + regs->regs[15] = regs->regs[1]; + if (regs->pc < regs->regs[0]) + /* Go to rewind point #1 */ + regs->pc = regs->regs[0] + offset - + instruction_size(ctrl_inw(regs->pc-4)); + } + + preempt_enable_no_resched(); +#endif + } + + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + ret = setup_rt_frame(sig, ka, info, oldset, regs); + else + ret = setup_frame(sig, ka, oldset, regs); + + if (ka->sa.sa_flags & SA_ONESHOT) + ka->sa.sa_handler = SIG_DFL; + + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } + + return ret; +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +static void do_signal(struct pt_regs *regs, unsigned int save_r0) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + sigset_t *oldset; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + if (handle_signal(signr, &ka, &info, oldset, + regs, save_r0) == 0) { + /* a signal was successfully delivered; the saved + * sigmask will have been stored in the signal frame, + * and will be restored by sigreturn, so we can simply + * clear the TIF_RESTORE_SIGMASK flag */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } + + return; + } + + no_signal: + /* Did we come from a system call? */ + if (regs->tra >= 0) { + /* Restart the system call - no handlers present */ + if (regs->regs[0] == -ERESTARTNOHAND || + regs->regs[0] == -ERESTARTSYS || + regs->regs[0] == -ERESTARTNOINTR) { + regs->regs[0] = save_r0; + regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); + } else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) { + regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); + regs->regs[3] = __NR_restart_syscall; + } + } + + /* if there's no signal to deliver, we just put the saved sigmask + * back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } +} + +asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, + __u32 thread_info_flags) +{ + /* deal with pending signal delivery */ + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs, save_r0); +} diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c new file mode 100644 index 00000000000..96ba81f324b --- /dev/null +++ b/arch/sh/kernel/signal_64.c @@ -0,0 +1,754 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * arch/sh64/kernel/signal.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * Started from sh version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_RET 9 +#define REG_ARG1 2 +#define REG_ARG2 3 +#define REG_ARG3 4 +#define REG_SP 15 +#define REG_PR 18 +#define REF_REG_RET regs->regs[REG_RET] +#define REF_REG_SP regs->regs[REG_SP] +#define DEREF_REG_PR regs->regs[REG_PR] + +#define DEBUG_SIG 0 + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ + +asmlinkage int +sys_sigsuspend(old_sigset_t mask, + unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs * regs) +{ + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + REF_REG_RET = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + regs->pc += 4; /* because sys_sigreturn decrements the pc */ + if (do_signal(regs, &saveset)) { + /* pc now points at signal handler. Need to decrement + it because entry.S will increment it. */ + regs->pc -= 4; + return -EINTR; + } + } +} + +asmlinkage int +sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, + unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, + struct pt_regs * regs) +{ + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + REF_REG_RET = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + regs->pc += 4; /* because sys_sigreturn decrements the pc */ + if (do_signal(regs, &saveset)) { + /* pc now points at signal handler. Need to decrement + it because entry.S will increment it. */ + regs->pc -= 4; + return -EINTR; + } + } +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction __user *act, + struct old_sigaction __user *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, + struct pt_regs * regs) +{ + return do_sigaltstack(uss, uoss, REF_REG_SP); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +struct sigframe +{ + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS-1]; + long long retcode[2]; +}; + +struct rt_sigframe +{ + struct siginfo __user *pinfo; + void *puc; + struct siginfo info; + struct ucontext uc; + long long retcode[2]; +}; + +#ifdef CONFIG_SH_FPU +static inline int +restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + int fpvalid; + + err |= __get_user (fpvalid, &sc->sc_fpvalid); + conditional_used_math(fpvalid); + if (! fpvalid) + return err; + + if (current == last_task_used_math) { + last_task_used_math = NULL; + regs->sr |= SR_FD; + } + + err |= __copy_from_user(¤t->thread.fpu.hard, &sc->sc_fpregs[0], + (sizeof(long long) * 32) + (sizeof(int) * 1)); + + return err; +} + +static inline int +setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + int fpvalid; + + fpvalid = !!used_math(); + err |= __put_user(fpvalid, &sc->sc_fpvalid); + if (! fpvalid) + return err; + + if (current == last_task_used_math) { + grab_fpu(); + fpsave(¤t->thread.fpu.hard); + release_fpu(); + last_task_used_math = NULL; + regs->sr |= SR_FD; + } + + err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.fpu.hard, + (sizeof(long long) * 32) + (sizeof(int) * 1)); + clear_used_math(); + + return err; +} +#else +static inline int +restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + return 0; +} +static inline int +setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + return 0; +} +#endif + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p) +{ + unsigned int err = 0; + unsigned long long current_sr, new_sr; +#define SR_MASK 0xffff8cfd + +#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) + + COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); + COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); + COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); + COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); + COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); + COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); + COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); + COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); + COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); + COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); + COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); + COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); + COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); + COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); + COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); + + /* Prevent the signal handler manipulating SR in a way that can + crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be + modified */ + current_sr = regs->sr; + err |= __get_user(new_sr, &sc->sc_sr); + regs->sr &= SR_MASK; + regs->sr |= (new_sr & ~SR_MASK); + + COPY(pc); + +#undef COPY + + /* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr + * has been restored above.) */ + err |= restore_sigcontext_fpu(regs, sc); + + regs->syscall_nr = -1; /* disable syscall checks */ + err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]); + return err; +} + +asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs * regs) +{ + struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP; + sigset_t set; + long long ret; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc, &ret)) + goto badframe; + regs->pc -= 4; + + return (int) ret; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs * regs) +{ + struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP; + sigset_t set; + stack_t __user st; + long long ret; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret)) + goto badframe; + regs->pc -= 4; + + if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + goto badframe; + /* It is more difficult to avoid calling this function than to + call it and ignore errors. */ + do_sigaltstack(&st, NULL, REF_REG_SP); + + return (int) ret; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + + /* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */ + err |= setup_sigcontext_fpu(regs, sc); + +#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) + + COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); + COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); + COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); + COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); + COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); + COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); + COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); + COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); + COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); + COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); + COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); + COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); + COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); + COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); + COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); + COPY(sr); COPY(pc); + +#undef COPY + + err |= __put_user(mask, &sc->oldmask); + + return err; +} + +/* + * Determine which stack to use.. + */ +static inline void __user * +get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) +{ + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) + sp = current->sas_ss_sp + current->sas_ss_size; + + return (void __user *)((sp - frame_size) & -8ul); +} + +void sa_default_restorer(void); /* See comments below */ +void sa_default_rt_restorer(void); /* See comments below */ + +static void setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); } + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1; + + /* + * On SH5 all edited pointers are subject to NEFF + */ + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + } else { + /* + * Different approach on SH5. + * . Endianness independent asm code gets placed in entry.S . + * This is limited to four ASM instructions corresponding + * to two long longs in size. + * . err checking is done on the else branch only + * . flush_icache_range() is called upon __put_user() only + * . all edited pointers are subject to NEFF + * . being code, linker turns ShMedia bit on, always + * dereference index -1. + */ + DEREF_REG_PR = (unsigned long) frame->retcode | 0x01; + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + + if (__copy_to_user(frame->retcode, + (unsigned long long)sa_default_restorer & (~1), 16) != 0) + goto give_sigsegv; + + /* Cohere the trampoline with the I-cache. */ + flush_cache_sigtramp(DEREF_REG_PR-1, DEREF_REG_PR-1+16); + } + + /* + * Set up registers for signal handler. + * All edited pointers are subject to NEFF. + */ + regs->regs[REG_SP] = (unsigned long) frame; + regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ? + (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP]; + regs->regs[REG_ARG1] = signal; /* Arg for signal handler */ + + /* FIXME: + The glibc profiling support for SH-5 needs to be passed a sigcontext + so it can retrieve the PC. At some point during 2003 the glibc + support was changed to receive the sigcontext through the 2nd + argument, but there are still versions of libc.so in use that use + the 3rd argument. Until libc.so is stabilised, pass the sigcontext + through both 2nd and 3rd arguments. + */ + + regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc; + regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc; + + regs->pc = (unsigned long) ka->sa.sa_handler; + regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc; + + set_fs(USER_DS); + +#if DEBUG_SIG + /* Broken %016Lx */ + printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", + signal, + current->comm, current->pid, frame, + regs->pc >> 32, regs->pc & 0xffffffff, + DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); +#endif + + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->regs[REG_SP]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1; + + /* + * On SH5 all edited pointers are subject to NEFF + */ + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + } else { + /* + * Different approach on SH5. + * . Endianness independent asm code gets placed in entry.S . + * This is limited to four ASM instructions corresponding + * to two long longs in size. + * . err checking is done on the else branch only + * . flush_icache_range() is called upon __put_user() only + * . all edited pointers are subject to NEFF + * . being code, linker turns ShMedia bit on, always + * dereference index -1. + */ + + DEREF_REG_PR = (unsigned long) frame->retcode | 0x01; + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + + if (__copy_to_user(frame->retcode, + (unsigned long long)sa_default_rt_restorer & (~1), 16) != 0) + goto give_sigsegv; + + flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15); + } + + /* + * Set up registers for signal handler. + * All edited pointers are subject to NEFF. + */ + regs->regs[REG_SP] = (unsigned long) frame; + regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ? + (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP]; + regs->regs[REG_ARG1] = signal; /* Arg for signal handler */ + regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info; + regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext; + regs->pc = (unsigned long) ka->sa.sa_handler; + regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc; + + set_fs(USER_DS); + +#if DEBUG_SIG + /* Broken %016Lx */ + printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", + signal, + current->comm, current->pid, frame, + regs->pc >> 32, regs->pc & 0xffffffff, + DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); +#endif + + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +/* + * OK, we're invoking a handler + */ + +static void +handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) +{ + /* Are we from a system call? */ + if (regs->syscall_nr >= 0) { + /* If so, check system call restarting.. */ + switch (regs->regs[REG_RET]) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->regs[REG_RET] = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->regs[REG_RET] = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + /* Decode syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + } + } + + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + setup_rt_frame(sig, ka, info, oldset, regs); + else + setup_frame(sig, ka, oldset, regs); + + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, 0); + + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &info, &ka, oldset, regs); + + /* + * If a signal was successfully delivered, the saved sigmask + * is in its frame, and we can clear the TIF_RESTORE_SIGMASK + * flag. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + + return 1; + } + +no_signal: + /* Did we come from a system call? */ + if (regs->syscall_nr >= 0) { + /* Restart the system call - no handlers present */ + switch (regs->regs[REG_RET]) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* Decode Syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + break; + + case -ERESTART_RESTARTBLOCK: + regs->regs[REG_RET] = __NR_restart_syscall; + regs->pc -= 4; + break; + } + } + + /* No signal to deliver -- put the saved sigmask back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + + return 0; +} diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c deleted file mode 100644 index 79fc48cf54c..00000000000 --- a/arch/sh64/kernel/signal.c +++ /dev/null @@ -1,750 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/signal.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * Started from sh version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define REG_RET 9 -#define REG_ARG1 2 -#define REG_ARG2 3 -#define REG_ARG3 4 -#define REG_SP 15 -#define REG_PR 18 -#define REF_REG_RET regs->regs[REG_RET] -#define REF_REG_SP regs->regs[REG_SP] -#define DEREF_REG_PR regs->regs[REG_PR] - -#define DEBUG_SIG 0 - -#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); - -/* - * Atomically swap in the new signal mask, and wait for a signal. - */ - -asmlinkage int -sys_sigsuspend(old_sigset_t mask, - unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs * regs) -{ - sigset_t saveset; - - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - REF_REG_RET = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - regs->pc += 4; /* because sys_sigreturn decrements the pc */ - if (do_signal(regs, &saveset)) { - /* pc now points at signal handler. Need to decrement - it because entry.S will increment it. */ - regs->pc -= 4; - return -EINTR; - } - } -} - -asmlinkage int -sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, - unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, - struct pt_regs * regs) -{ - sigset_t saveset, newset; - - /* XXX: Don't preclude handling different sized sigset_t's. */ - if (sigsetsize != sizeof(sigset_t)) - return -EINVAL; - - if (copy_from_user(&newset, unewset, sizeof(newset))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - saveset = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - REF_REG_RET = -EINTR; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - regs->pc += 4; /* because sys_sigreturn decrements the pc */ - if (do_signal(regs, &saveset)) { - /* pc now points at signal handler. Need to decrement - it because entry.S will increment it. */ - regs->pc -= 4; - return -EINTR; - } - } -} - -asmlinkage int -sys_sigaction(int sig, const struct old_sigaction __user *act, - struct old_sigaction __user *oact) -{ - struct k_sigaction new_ka, old_ka; - int ret; - - if (act) { - old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) - return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); - siginitset(&new_ka.sa.sa_mask, mask); - } - - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) - return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); - } - - return ret; -} - -asmlinkage int -sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, - unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, - struct pt_regs * regs) -{ - return do_sigaltstack(uss, uoss, REF_REG_SP); -} - - -/* - * Do a signal return; undo the signal stack. - */ - -struct sigframe -{ - struct sigcontext sc; - unsigned long extramask[_NSIG_WORDS-1]; - long long retcode[2]; -}; - -struct rt_sigframe -{ - struct siginfo __user *pinfo; - void *puc; - struct siginfo info; - struct ucontext uc; - long long retcode[2]; -}; - -#ifdef CONFIG_SH_FPU -static inline int -restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{ - int err = 0; - int fpvalid; - - err |= __get_user (fpvalid, &sc->sc_fpvalid); - conditional_used_math(fpvalid); - if (! fpvalid) - return err; - - if (current == last_task_used_math) { - last_task_used_math = NULL; - regs->sr |= SR_FD; - } - - err |= __copy_from_user(¤t->thread.fpu.hard, &sc->sc_fpregs[0], - (sizeof(long long) * 32) + (sizeof(int) * 1)); - - return err; -} - -static inline int -setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{ - int err = 0; - int fpvalid; - - fpvalid = !!used_math(); - err |= __put_user(fpvalid, &sc->sc_fpvalid); - if (! fpvalid) - return err; - - if (current == last_task_used_math) { - grab_fpu(); - fpsave(¤t->thread.fpu.hard); - release_fpu(); - last_task_used_math = NULL; - regs->sr |= SR_FD; - } - - err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.fpu.hard, - (sizeof(long long) * 32) + (sizeof(int) * 1)); - clear_used_math(); - - return err; -} -#else -static inline int -restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{} -static inline int -setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{} -#endif - -static int -restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p) -{ - unsigned int err = 0; - unsigned long long current_sr, new_sr; -#define SR_MASK 0xffff8cfd - -#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) - - COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); - COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); - COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); - COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); - COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); - COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); - COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); - COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); - COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); - COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); - COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); - COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); - COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); - COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); - COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); - COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); - COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); - COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); - - /* Prevent the signal handler manipulating SR in a way that can - crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be - modified */ - current_sr = regs->sr; - err |= __get_user(new_sr, &sc->sc_sr); - regs->sr &= SR_MASK; - regs->sr |= (new_sr & ~SR_MASK); - - COPY(pc); - -#undef COPY - - /* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr - * has been restored above.) */ - err |= restore_sigcontext_fpu(regs, sc); - - regs->syscall_nr = -1; /* disable syscall checks */ - err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]); - return err; -} - -asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3, - unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs * regs) -{ - struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP; - sigset_t set; - long long ret; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__get_user(set.sig[0], &frame->sc.oldmask) - || (_NSIG_WORDS > 1 - && __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->sc, &ret)) - goto badframe; - regs->pc -= 4; - - return (int) ret; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3, - unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs * regs) -{ - struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP; - sigset_t set; - stack_t __user st; - long long ret; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret)) - goto badframe; - regs->pc -= 4; - - if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) - goto badframe; - /* It is more difficult to avoid calling this function than to - call it and ignore errors. */ - do_sigaltstack(&st, NULL, REF_REG_SP); - - return (int) ret; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -/* - * Set up a signal frame. - */ - -static int -setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, - unsigned long mask) -{ - int err = 0; - - /* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */ - err |= setup_sigcontext_fpu(regs, sc); - -#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) - - COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); - COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); - COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); - COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); - COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); - COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); - COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); - COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); - COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); - COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); - COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); - COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); - COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); - COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); - COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); - COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); - COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); - COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); - COPY(sr); COPY(pc); - -#undef COPY - - err |= __put_user(mask, &sc->oldmask); - - return err; -} - -/* - * Determine which stack to use.. - */ -static inline void __user * -get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) -{ - if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) - sp = current->sas_ss_sp + current->sas_ss_size; - - return (void __user *)((sp - frame_size) & -8ul); -} - -void sa_default_restorer(void); /* See comments below */ -void sa_default_rt_restorer(void); /* See comments below */ - -static void setup_frame(int sig, struct k_sigaction *ka, - sigset_t *set, struct pt_regs *regs) -{ - struct sigframe __user *frame; - int err = 0; - int signal; - - frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - signal = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; - - err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); - - /* Give up earlier as i386, in case */ - if (err) - goto give_sigsegv; - - if (_NSIG_WORDS > 1) { - err |= __copy_to_user(frame->extramask, &set->sig[1], - sizeof(frame->extramask)); } - - /* Give up earlier as i386, in case */ - if (err) - goto give_sigsegv; - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - if (ka->sa.sa_flags & SA_RESTORER) { - DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1; - - /* - * On SH5 all edited pointers are subject to NEFF - */ - DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? - (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; - } else { - /* - * Different approach on SH5. - * . Endianness independent asm code gets placed in entry.S . - * This is limited to four ASM instructions corresponding - * to two long longs in size. - * . err checking is done on the else branch only - * . flush_icache_range() is called upon __put_user() only - * . all edited pointers are subject to NEFF - * . being code, linker turns ShMedia bit on, always - * dereference index -1. - */ - DEREF_REG_PR = (unsigned long) frame->retcode | 0x01; - DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? - (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; - - if (__copy_to_user(frame->retcode, - (unsigned long long)sa_default_restorer & (~1), 16) != 0) - goto give_sigsegv; - - /* Cohere the trampoline with the I-cache. */ - flush_cache_sigtramp(DEREF_REG_PR-1, DEREF_REG_PR-1+16); - } - - /* - * Set up registers for signal handler. - * All edited pointers are subject to NEFF. - */ - regs->regs[REG_SP] = (unsigned long) frame; - regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ? - (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP]; - regs->regs[REG_ARG1] = signal; /* Arg for signal handler */ - - /* FIXME: - The glibc profiling support for SH-5 needs to be passed a sigcontext - so it can retrieve the PC. At some point during 2003 the glibc - support was changed to receive the sigcontext through the 2nd - argument, but there are still versions of libc.so in use that use - the 3rd argument. Until libc.so is stabilised, pass the sigcontext - through both 2nd and 3rd arguments. - */ - - regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc; - regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc; - - regs->pc = (unsigned long) ka->sa.sa_handler; - regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc; - - set_fs(USER_DS); - -#if DEBUG_SIG - /* Broken %016Lx */ - printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", - signal, - current->comm, current->pid, frame, - regs->pc >> 32, regs->pc & 0xffffffff, - DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); -#endif - - return; - -give_sigsegv: - force_sigsegv(sig, current); -} - -static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs) -{ - struct rt_sigframe __user *frame; - int err = 0; - int signal; - - frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - goto give_sigsegv; - - signal = current_thread_info()->exec_domain - && current_thread_info()->exec_domain->signal_invmap - && sig < 32 - ? current_thread_info()->exec_domain->signal_invmap[sig] - : sig; - - err |= __put_user(&frame->info, &frame->pinfo); - err |= __put_user(&frame->uc, &frame->puc); - err |= copy_siginfo_to_user(&frame->info, info); - - /* Give up earlier as i386, in case */ - if (err) - goto give_sigsegv; - - /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user((void *)current->sas_ss_sp, - &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->regs[REG_SP]), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, - regs, set->sig[0]); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - - /* Give up earlier as i386, in case */ - if (err) - goto give_sigsegv; - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - if (ka->sa.sa_flags & SA_RESTORER) { - DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1; - - /* - * On SH5 all edited pointers are subject to NEFF - */ - DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? - (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; - } else { - /* - * Different approach on SH5. - * . Endianness independent asm code gets placed in entry.S . - * This is limited to four ASM instructions corresponding - * to two long longs in size. - * . err checking is done on the else branch only - * . flush_icache_range() is called upon __put_user() only - * . all edited pointers are subject to NEFF - * . being code, linker turns ShMedia bit on, always - * dereference index -1. - */ - - DEREF_REG_PR = (unsigned long) frame->retcode | 0x01; - DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? - (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; - - if (__copy_to_user(frame->retcode, - (unsigned long long)sa_default_rt_restorer & (~1), 16) != 0) - goto give_sigsegv; - - flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15); - } - - /* - * Set up registers for signal handler. - * All edited pointers are subject to NEFF. - */ - regs->regs[REG_SP] = (unsigned long) frame; - regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ? - (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP]; - regs->regs[REG_ARG1] = signal; /* Arg for signal handler */ - regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info; - regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext; - regs->pc = (unsigned long) ka->sa.sa_handler; - regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc; - - set_fs(USER_DS); - -#if DEBUG_SIG - /* Broken %016Lx */ - printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", - signal, - current->comm, current->pid, frame, - regs->pc >> 32, regs->pc & 0xffffffff, - DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); -#endif - - return; - -give_sigsegv: - force_sigsegv(sig, current); -} - -/* - * OK, we're invoking a handler - */ - -static void -handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, - sigset_t *oldset, struct pt_regs * regs) -{ - /* Are we from a system call? */ - if (regs->syscall_nr >= 0) { - /* If so, check system call restarting.. */ - switch (regs->regs[REG_RET]) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - regs->regs[REG_RET] = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[REG_RET] = -EINTR; - break; - } - /* fallthrough */ - case -ERESTARTNOINTR: - /* Decode syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - } - } - - /* Set up the stack frame */ - if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs); - else - setup_frame(sig, ka, oldset, regs); - - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) -{ - siginfo_t info; - int signr; - struct k_sigaction ka; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return 1; - - if (try_to_freeze()) - goto no_signal; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else if (!oldset) - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, 0); - - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); - - /* - * If a signal was successfully delivered, the saved sigmask - * is in its frame, and we can clear the TIF_RESTORE_SIGMASK - * flag. - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - - return 1; - } - -no_signal: - /* Did we come from a system call? */ - if (regs->syscall_nr >= 0) { - /* Restart the system call - no handlers present */ - switch (regs->regs[REG_RET]) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - /* Decode Syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - break; - - case -ERESTART_RESTARTBLOCK: - regs->regs[REG_RET] = __NR_restart_syscall; - regs->pc -= 4; - break; - } - } - - /* No signal to deliver -- put the saved sigmask back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } - - return 0; -} diff --git a/include/asm-sh/sigcontext.h b/include/asm-sh/sigcontext.h index eb8effba2e8..8583143fa28 100644 --- a/include/asm-sh/sigcontext.h +++ b/include/asm-sh/sigcontext.h @@ -4,6 +4,18 @@ struct sigcontext { unsigned long oldmask; +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) + /* CPU registers */ + unsigned long long sc_regs[63]; + unsigned long long sc_tregs[8]; + unsigned long long sc_pc; + unsigned long long sc_sr; + + /* FPU registers */ + unsigned long long sc_fpregs[32]; + unsigned int sc_fpscr; + unsigned int sc_fpvalid; +#else /* CPU registers */ unsigned long sc_regs[16]; unsigned long sc_pc; @@ -21,6 +33,7 @@ struct sigcontext { unsigned int sc_fpul; unsigned int sc_ownedfp; #endif +#endif }; #endif /* __ASM_SH_SIGCONTEXT_H */ -- cgit v1.2.3-70-g09d2 From 781c63e68ddc37f2fb5eed9b44b3075cd2b3ced3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:12:25 +0900 Subject: sh: timer.h stub for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/timer.h | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 include/asm-sh/cpu-sh5/timer.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/timer.h b/include/asm-sh/cpu-sh5/timer.h new file mode 100644 index 00000000000..88da9b341a3 --- /dev/null +++ b/include/asm-sh/cpu-sh5/timer.h @@ -0,0 +1,4 @@ +#ifndef __ASM_SH_CPU_SH5_TIMER_H +#define __ASM_SH_CPU_SH5_TIMER_H + +#endif /* __ASM_SH_CPU_SH5_TIMER_H */ -- cgit v1.2.3-70-g09d2 From 256b22ca66987c537064dc25b0b267966189b5ba Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:27:03 +0900 Subject: sh: Have SH-5 provide an {en,dis}able_fpu() impl. Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_64.c | 8 ++++---- arch/sh/kernel/traps_64.c | 8 ++++---- include/asm-sh/processor_64.h | 15 +++++++++++++-- 3 files changed, 21 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 8a2d339cf76..14e7d5e5679 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -74,9 +74,9 @@ get_fpu_long(struct task_struct *task, unsigned long addr) } if (last_task_used_math == task) { - grab_fpu(); + enable_fpu(); fpsave(&task->thread.fpu.hard); - release_fpu(); + disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; } @@ -110,9 +110,9 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) fpinit(&task->thread.fpu.hard); set_stopped_child_used_math(task); } else if (last_task_used_math == task) { - grab_fpu(); + enable_fpu(); fpsave(&task->thread.fpu.hard); - release_fpu(); + disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; } diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index 742ce18b682..0f4ea3ac3e0 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -617,9 +617,9 @@ static int misaligned_fpu_load(struct pt_regs *regs, context switch the registers into memory so they can be indexed by register number. */ if (last_task_used_math == current) { - grab_fpu(); + enable_fpu(); fpsave(¤t->thread.fpu.hard); - release_fpu(); + disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; } @@ -690,9 +690,9 @@ static int misaligned_fpu_store(struct pt_regs *regs, context switch the registers into memory so they can be indexed by register number. */ if (last_task_used_math == current) { - grab_fpu(); + enable_fpu(); fpsave(¤t->thread.fpu.hard); - release_fpu(); + disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; } diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index ecd6b403f7d..312fd73fb87 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -18,6 +18,7 @@ #include #include #include +#include #include /* @@ -218,7 +219,7 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); * FPU lazy state save handling. */ -static inline void release_fpu(void) +static inline void disable_fpu(void) { unsigned long long __dummy; @@ -230,7 +231,7 @@ static inline void release_fpu(void) : "r" (SR_FD)); } -static inline void grab_fpu(void) +static inline void enable_fpu(void) { unsigned long long __dummy; @@ -242,6 +243,16 @@ static inline void grab_fpu(void) : "r" (~SR_FD)); } +static inline void release_fpu(struct pt_regs *regs) +{ + regs->sr |= SR_FD; +} + +static inline void grab_fpu(struct pt_regs *regs) +{ + regs->sr &= ~SR_FD; +} + /* Round to nearest, no exceptions on inexact, overflow, underflow, zero-divide, invalid. Configure option for whether to flush denorms to zero, or except if a denorm is encountered. */ -- cgit v1.2.3-70-g09d2 From 959f7d587e236a2d218f527771f156c336409d11 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:35:53 +0900 Subject: sh: Move over the SH-5 head.S and tlb.h. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_32 | 2 +- arch/sh/kernel/Makefile_64 | 2 +- arch/sh/kernel/head.S | 120 --------------- arch/sh/kernel/head_32.S | 120 +++++++++++++++ arch/sh/kernel/head_64.S | 367 ++++++++++++++++++++++++++++++++++++++++++++ arch/sh64/kernel/head.S | 372 --------------------------------------------- include/asm-sh/tlb.h | 10 +- include/asm-sh/tlb_64.h | 69 +++++++++ include/asm-sh64/tlb.h | 92 ----------- 9 files changed, 567 insertions(+), 587 deletions(-) delete mode 100644 arch/sh/kernel/head.S create mode 100644 arch/sh/kernel/head_32.S create mode 100644 arch/sh/kernel/head_64.S delete mode 100644 arch/sh64/kernel/head.S create mode 100644 include/asm-sh/tlb_64.h delete mode 100644 include/asm-sh64/tlb.h (limited to 'include') diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 29b44eb3b93..35be5e9674f 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -2,7 +2,7 @@ # Makefile for the Linux/SuperH kernel. # -extra-y := head.o init_task.o vmlinux.lds +extra-y := head_32.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o syscalls.o \ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index fb87d642d1c..6e72ed4c07f 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -1,4 +1,4 @@ -extra-y := head.o init_task.o vmlinux.lds +extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ ptrace_64.o semaphore.o setup.o signal_64.o sys_sh64.o syscalls.o \ diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S deleted file mode 100644 index 3338239717f..00000000000 --- a/arch/sh/kernel/head.S +++ /dev/null @@ -1,120 +0,0 @@ -/* $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $ - * - * arch/sh/kernel/head.S - * - * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Head.S contains the SH exception handlers and startup code. - */ -#include -#include - -#ifdef CONFIG_CPU_SH4A -#define SYNCO() synco - -#define PREFI(label, reg) \ - mov.l label, reg; \ - prefi @reg -#else -#define SYNCO() -#define PREFI(label, reg) -#endif - - .section .empty_zero_page, "aw" -ENTRY(empty_zero_page) - .long 1 /* MOUNT_ROOT_RDONLY */ - .long 0 /* RAMDISK_FLAGS */ - .long 0x0200 /* ORIG_ROOT_DEV */ - .long 1 /* LOADER_TYPE */ - .long 0x00360000 /* INITRD_START */ - .long 0x000a0000 /* INITRD_SIZE */ - .long 0 -1: - .skip PAGE_SIZE - empty_zero_page - 1b - - .section .text.head, "ax" - -/* - * Condition at the entry of _stext: - * - * BSC has already been initialized. - * INTC may or may not be initialized. - * VBR may or may not be initialized. - * MMU may or may not be initialized. - * Cache may or may not be initialized. - * Hardware (including on-chip modules) may or may not be initialized. - * - */ -ENTRY(_stext) - ! Initialize Status Register - mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF - ldc r0, sr - ! Initialize global interrupt mask -#ifdef CONFIG_CPU_HAS_SR_RB - mov #0, r0 - ldc r0, r6_bank -#endif - - /* - * Prefetch if possible to reduce cache miss penalty. - * - * We do this early on for SH-4A as a micro-optimization, - * as later on we will have speculative execution enabled - * and this will become less of an issue. - */ - PREFI(5f, r0) - PREFI(6f, r0) - - ! - mov.l 2f, r0 - mov r0, r15 ! Set initial r15 (stack pointer) -#ifdef CONFIG_CPU_HAS_SR_RB - mov.l 7f, r0 - ldc r0, r7_bank ! ... and initial thread_info -#endif - - ! Clear BSS area -#ifdef CONFIG_SMP - mov.l 3f, r0 - cmp/eq #0, r0 ! skip clear if set to zero - bt 10f -#endif - - mov.l 3f, r1 - add #4, r1 - mov.l 4f, r2 - mov #0, r0 -9: cmp/hs r2, r1 - bf/s 9b ! while (r1 < r2) - mov.l r0,@-r2 - -10: - ! Additional CPU initialization - mov.l 6f, r0 - jsr @r0 - nop - - SYNCO() ! Wait for pending instructions.. - - ! Start kernel - mov.l 5f, r0 - jmp @r0 - nop - - .balign 4 -#if defined(CONFIG_CPU_SH2) -1: .long 0x000000F0 ! IMASK=0xF -#else -1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF -#endif -ENTRY(stack_start) -2: .long init_thread_union+THREAD_SIZE -3: .long __bss_start -4: .long _end -5: .long start_kernel -6: .long sh_cpu_init -7: .long init_thread_union diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S new file mode 100644 index 00000000000..3338239717f --- /dev/null +++ b/arch/sh/kernel/head_32.S @@ -0,0 +1,120 @@ +/* $Id: head.S,v 1.7 2003/09/01 17:58:19 lethal Exp $ + * + * arch/sh/kernel/head.S + * + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Head.S contains the SH exception handlers and startup code. + */ +#include +#include + +#ifdef CONFIG_CPU_SH4A +#define SYNCO() synco + +#define PREFI(label, reg) \ + mov.l label, reg; \ + prefi @reg +#else +#define SYNCO() +#define PREFI(label, reg) +#endif + + .section .empty_zero_page, "aw" +ENTRY(empty_zero_page) + .long 1 /* MOUNT_ROOT_RDONLY */ + .long 0 /* RAMDISK_FLAGS */ + .long 0x0200 /* ORIG_ROOT_DEV */ + .long 1 /* LOADER_TYPE */ + .long 0x00360000 /* INITRD_START */ + .long 0x000a0000 /* INITRD_SIZE */ + .long 0 +1: + .skip PAGE_SIZE - empty_zero_page - 1b + + .section .text.head, "ax" + +/* + * Condition at the entry of _stext: + * + * BSC has already been initialized. + * INTC may or may not be initialized. + * VBR may or may not be initialized. + * MMU may or may not be initialized. + * Cache may or may not be initialized. + * Hardware (including on-chip modules) may or may not be initialized. + * + */ +ENTRY(_stext) + ! Initialize Status Register + mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF + ldc r0, sr + ! Initialize global interrupt mask +#ifdef CONFIG_CPU_HAS_SR_RB + mov #0, r0 + ldc r0, r6_bank +#endif + + /* + * Prefetch if possible to reduce cache miss penalty. + * + * We do this early on for SH-4A as a micro-optimization, + * as later on we will have speculative execution enabled + * and this will become less of an issue. + */ + PREFI(5f, r0) + PREFI(6f, r0) + + ! + mov.l 2f, r0 + mov r0, r15 ! Set initial r15 (stack pointer) +#ifdef CONFIG_CPU_HAS_SR_RB + mov.l 7f, r0 + ldc r0, r7_bank ! ... and initial thread_info +#endif + + ! Clear BSS area +#ifdef CONFIG_SMP + mov.l 3f, r0 + cmp/eq #0, r0 ! skip clear if set to zero + bt 10f +#endif + + mov.l 3f, r1 + add #4, r1 + mov.l 4f, r2 + mov #0, r0 +9: cmp/hs r2, r1 + bf/s 9b ! while (r1 < r2) + mov.l r0,@-r2 + +10: + ! Additional CPU initialization + mov.l 6f, r0 + jsr @r0 + nop + + SYNCO() ! Wait for pending instructions.. + + ! Start kernel + mov.l 5f, r0 + jmp @r0 + nop + + .balign 4 +#if defined(CONFIG_CPU_SH2) +1: .long 0x000000F0 ! IMASK=0xF +#else +1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF +#endif +ENTRY(stack_start) +2: .long init_thread_union+THREAD_SIZE +3: .long __bss_start +4: .long _end +5: .long start_kernel +6: .long sh_cpu_init +7: .long init_thread_union diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S new file mode 100644 index 00000000000..8015af6d1da --- /dev/null +++ b/arch/sh/kernel/head_64.S @@ -0,0 +1,367 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * arch/sh64/kernel/head.S + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * + * benedict.gaster@superh.com: 2nd May 2002 + * Moved definition of empty_zero_page to its own section allowing + * it to be placed at an absolute address known at load time. + * + * lethal@linux-sh.org: 9th May 2003 + * Kill off GLOBAL_NAME() usage. + * + * lethal@linux-sh.org: 8th May 2004 + * Add early SCIF console DTLB mapping. + */ +#include +#include +#include +#include +#include +#include + +/* + * MMU defines: TLB boundaries. + */ + +#define MMUIR_FIRST ITLB_FIXED +#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP +#define MMUIR_STEP TLB_STEP + +#define MMUDR_FIRST DTLB_FIXED +#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP +#define MMUDR_STEP TLB_STEP + +/* Safety check : CONFIG_CACHED_MEMORY_OFFSET has to be a multiple of 512Mb */ +#if (CONFIG_CACHED_MEMORY_OFFSET & ((1UL<<29)-1)) +#error "CONFIG_CACHED_MEMORY_OFFSET must be a multiple of 512Mb" +#endif + +/* + * MMU defines: Fixed TLBs. + */ +/* Deal safely with the case where the base of RAM is not 512Mb aligned */ + +#define ALIGN_512M_MASK (0xffffffffe0000000) +#define ALIGNED_EFFECTIVE ((CONFIG_CACHED_MEMORY_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK) +#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK) + +#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE) + /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ + +#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL) + /* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */ + +#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE + /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ +#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL + /* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */ + +#ifdef CONFIG_ICACHE_DISABLED +#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */ +#else +#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */ +#endif +#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */ + +#if defined (CONFIG_DCACHE_DISABLED) +#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */ +#elif defined (CONFIG_DCACHE_WRITE_THROUGH) +#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */ + /* WT, invalidate */ +#elif defined (CONFIG_DCACHE_WRITE_BACK) +#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */ + /* WB, invalidate */ +#else +#error preprocessor flag CONFIG_DCACHE_... not recognized! +#endif + +#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */ + + .section .empty_zero_page, "aw" + .global empty_zero_page + +empty_zero_page: + .long 1 /* MOUNT_ROOT_RDONLY */ + .long 0 /* RAMDISK_FLAGS */ + .long 0x0200 /* ORIG_ROOT_DEV */ + .long 1 /* LOADER_TYPE */ + .long 0x00800000 /* INITRD_START */ + .long 0x00800000 /* INITRD_SIZE */ + .long 0 + + .text + .balign 4096,0,4096 + + .section .data, "aw" + .balign PAGE_SIZE + + .section .data, "aw" + .balign PAGE_SIZE + + .global swapper_pg_dir +swapper_pg_dir: + .space PAGE_SIZE, 0 + + .global empty_bad_page +empty_bad_page: + .space PAGE_SIZE, 0 + + .global empty_bad_pte_table +empty_bad_pte_table: + .space PAGE_SIZE, 0 + + .global fpu_in_use +fpu_in_use: .quad 0 + + + .section .text.head, "ax" + .balign L1_CACHE_BYTES +/* + * Condition at the entry of __stext: + * . Reset state: + * . SR.FD = 1 (FPU disabled) + * . SR.BL = 1 (Exceptions disabled) + * . SR.MD = 1 (Privileged Mode) + * . SR.MMU = 0 (MMU Disabled) + * . SR.CD = 0 (CTC User Visible) + * . SR.IMASK = Undefined (Interrupt Mask) + * + * Operations supposed to be performed by __stext: + * . prevent speculative fetch onto device memory while MMU is off + * . reflect as much as possible SH5 ABI (r15, r26, r27, r18) + * . first, save CPU state and set it to something harmless + * . any CPU detection and/or endianness settings (?) + * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD + * . set initial TLB entries for cached and uncached regions + * (no fine granularity paging) + * . set initial cache state + * . enable MMU and caches + * . set CPU to a consistent state + * . registers (including stack pointer and current/KCR0) + * . NOT expecting to set Exception handling nor VBR/RESVEC/DCR + * at this stage. This is all to later Linux initialization steps. + * . initialize FPU + * . clear BSS + * . jump into start_kernel() + * . be prepared to hopeless start_kernel() returns. + * + */ + .global _stext +_stext: + /* + * Prevent speculative fetch on device memory due to + * uninitialized target registers. + */ + ptabs/u ZERO, tr0 + ptabs/u ZERO, tr1 + ptabs/u ZERO, tr2 + ptabs/u ZERO, tr3 + ptabs/u ZERO, tr4 + ptabs/u ZERO, tr5 + ptabs/u ZERO, tr6 + ptabs/u ZERO, tr7 + synci + + /* + * Read/Set CPU state. After this block: + * r29 = Initial SR + */ + getcon SR, r29 + movi SR_HARMLESS, r20 + putcon r20, SR + + /* + * Initialize EMI/LMI. To Be Done. + */ + + /* + * CPU detection and/or endianness settings (?). To Be Done. + * Pure PIC code here, please ! Just save state into r30. + * After this block: + * r30 = CPU type/Platform Endianness + */ + + /* + * Set initial TLB entries for cached and uncached regions. + * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't ! + */ + /* Clear ITLBs */ + pta clear_ITLB, tr1 + movi MMUIR_FIRST, r21 + movi MMUIR_END, r22 +clear_ITLB: + putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */ + addi r21, MMUIR_STEP, r21 + bne r21, r22, tr1 + + /* Clear DTLBs */ + pta clear_DTLB, tr1 + movi MMUDR_FIRST, r21 + movi MMUDR_END, r22 +clear_DTLB: + putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */ + addi r21, MMUDR_STEP, r21 + bne r21, r22, tr1 + + /* Map one big (512Mb) page for ITLB */ + movi MMUIR_FIRST, r21 + movi MMUIR_TEXT_L, r22 /* PTEL first */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */ + movi MMUIR_TEXT_H, r22 /* PTEH last */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */ + + /* Map one big CACHED (512Mb) page for DTLB */ + movi MMUDR_FIRST, r21 + movi MMUDR_CACHED_L, r22 /* PTEL first */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */ + movi MMUDR_CACHED_H, r22 /* PTEH last */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */ + +#ifdef CONFIG_EARLY_PRINTK + /* + * Setup a DTLB translation for SCIF phys. + */ + addi r21, MMUDR_STEP, r21 + movi 0x0a03, r22 /* SCIF phys */ + shori 0x0148, r22 + putcfg r21, 1, r22 /* PTEL first */ + movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */ + shori 0x0003, r22 + putcfg r21, 0, r22 /* PTEH last */ +#endif + + /* + * Set cache behaviours. + */ + /* ICache */ + movi ICCR_BASE, r21 + movi ICCR0_INIT_VAL, r22 + movi ICCR1_INIT_VAL, r23 + putcfg r21, ICCR_REG0, r22 + putcfg r21, ICCR_REG1, r23 + + /* OCache */ + movi OCCR_BASE, r21 + movi OCCR0_INIT_VAL, r22 + movi OCCR1_INIT_VAL, r23 + putcfg r21, OCCR_REG0, r22 + putcfg r21, OCCR_REG1, r23 + + + /* + * Enable Caches and MMU. Do the first non-PIC jump. + * Now head.S global variables, constants and externs + * can be used. + */ + getcon SR, r21 + movi SR_ENABLE_MMU, r22 + or r21, r22, r21 + putcon r21, SSR + movi hyperspace, r22 + ori r22, 1, r22 /* Make it SHmedia, not required but..*/ + putcon r22, SPC + synco + rte /* And now go into the hyperspace ... */ +hyperspace: /* ... that's the next instruction ! */ + + /* + * Set CPU to a consistent state. + * r31 = FPU support flag + * tr0/tr7 in use. Others give a chance to loop somewhere safe + */ + movi start_kernel, r32 + ori r32, 1, r32 + + ptabs r32, tr0 /* r32 = _start_kernel address */ + pta/u hopeless, tr1 + pta/u hopeless, tr2 + pta/u hopeless, tr3 + pta/u hopeless, tr4 + pta/u hopeless, tr5 + pta/u hopeless, tr6 + pta/u hopeless, tr7 + gettr tr1, r28 /* r28 = hopeless address */ + + /* Set initial stack pointer */ + movi init_thread_union, SP + putcon SP, KCR0 /* Set current to init_task */ + movi THREAD_SIZE, r22 /* Point to the end */ + add SP, r22, SP + + /* + * Initialize FPU. + * Keep FPU flag in r31. After this block: + * r31 = FPU flag + */ + movi fpu_in_use, r31 /* Temporary */ + +#ifdef CONFIG_SH_FPU + getcon SR, r21 + movi SR_ENABLE_FPU, r22 + and r21, r22, r22 + putcon r22, SR /* Try to enable */ + getcon SR, r22 + xor r21, r22, r21 + shlri r21, 15, r21 /* Supposedly 0/1 */ + st.q r31, 0 , r21 /* Set fpu_in_use */ +#else + movi 0, r21 + st.q r31, 0 , r21 /* Set fpu_in_use */ +#endif + or r21, ZERO, r31 /* Set FPU flag at last */ + +#ifndef CONFIG_SH_NO_BSS_INIT +/* Don't clear BSS if running on slow platforms such as an RTL simulation, + remote memory via SHdebug link, etc. For these the memory can be guaranteed + to be all zero on boot anyway. */ + /* + * Clear bss + */ + pta clear_quad, tr1 + movi __bss_start, r22 + movi _end, r23 +clear_quad: + st.q r22, 0, ZERO + addi r22, 8, r22 + bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */ +#endif + pta/u hopeless, tr1 + + /* Say bye to head.S but be prepared to wrongly get back ... */ + blink tr0, LINK + + /* If we ever get back here through LINK/tr1-tr7 */ + pta/u hopeless, tr7 + +hopeless: + /* + * Something's badly wrong here. Loop endlessly, + * there's nothing more we can do about it. + * + * Note on hopeless: it can be jumped into invariably + * before or after jumping into hyperspace. The only + * requirement is to be PIC called (PTA) before and + * any way (PTA/PTABS) after. According to Virtual + * to Physical mapping a simulator/emulator can easily + * tell where we came here from just looking at hopeless + * (PC) address. + * + * For debugging purposes: + * (r28) hopeless/loop address + * (r29) Original SR + * (r30) CPU type/Platform endianness + * (r31) FPU Support + * (r32) _start_kernel address + */ + blink tr7, ZERO diff --git a/arch/sh64/kernel/head.S b/arch/sh64/kernel/head.S deleted file mode 100644 index 186406d3ad9..00000000000 --- a/arch/sh64/kernel/head.S +++ /dev/null @@ -1,372 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/head.S - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * - * benedict.gaster@superh.com: 2nd May 2002 - * Moved definition of empty_zero_page to its own section allowing - * it to be placed at an absolute address known at load time. - * - * lethal@linux-sh.org: 9th May 2003 - * Kill off GLOBAL_NAME() usage. - * - * lethal@linux-sh.org: 8th May 2004 - * Add early SCIF console DTLB mapping. - */ - - -#include -#include -#include -#include -#include -#include -#include - -/* - * MMU defines: TLB boundaries. - */ - -#define MMUIR_FIRST ITLB_FIXED -#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP -#define MMUIR_STEP TLB_STEP - -#define MMUDR_FIRST DTLB_FIXED -#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP -#define MMUDR_STEP TLB_STEP - -/* Safety check : CONFIG_CACHED_MEMORY_OFFSET has to be a multiple of 512Mb */ -#if (CONFIG_CACHED_MEMORY_OFFSET & ((1UL<<29)-1)) -#error "CONFIG_CACHED_MEMORY_OFFSET must be a multiple of 512Mb" -#endif - -/* - * MMU defines: Fixed TLBs. - */ -/* Deal safely with the case where the base of RAM is not 512Mb aligned */ - -#define ALIGN_512M_MASK (0xffffffffe0000000) -#define ALIGNED_EFFECTIVE ((CONFIG_CACHED_MEMORY_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK) -#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK) - -#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE) - /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ - -#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL) - /* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */ - -#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE - /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ -#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL - /* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */ - -#ifdef CONFIG_ICACHE_DISABLED -#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */ -#else -#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */ -#endif -#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */ - -#if defined (CONFIG_DCACHE_DISABLED) -#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */ -#elif defined (CONFIG_DCACHE_WRITE_THROUGH) -#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */ - /* WT, invalidate */ -#elif defined (CONFIG_DCACHE_WRITE_BACK) -#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */ - /* WB, invalidate */ -#else -#error preprocessor flag CONFIG_DCACHE_... not recognized! -#endif - -#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */ - - .section .empty_zero_page, "aw" - .global empty_zero_page - -empty_zero_page: - .long 1 /* MOUNT_ROOT_RDONLY */ - .long 0 /* RAMDISK_FLAGS */ - .long 0x0200 /* ORIG_ROOT_DEV */ - .long 1 /* LOADER_TYPE */ - .long 0x00800000 /* INITRD_START */ - .long 0x00800000 /* INITRD_SIZE */ - .long 0 - - .text - .balign 4096,0,4096 - - .section .data, "aw" - .balign PAGE_SIZE - - .section .data, "aw" - .balign PAGE_SIZE - - .global swapper_pg_dir -swapper_pg_dir: - .space PAGE_SIZE, 0 - - .global empty_bad_page -empty_bad_page: - .space PAGE_SIZE, 0 - - .global empty_bad_pte_table -empty_bad_pte_table: - .space PAGE_SIZE, 0 - - .global fpu_in_use -fpu_in_use: .quad 0 - - - .section .text.head, "ax" - .balign L1_CACHE_BYTES -/* - * Condition at the entry of __stext: - * . Reset state: - * . SR.FD = 1 (FPU disabled) - * . SR.BL = 1 (Exceptions disabled) - * . SR.MD = 1 (Privileged Mode) - * . SR.MMU = 0 (MMU Disabled) - * . SR.CD = 0 (CTC User Visible) - * . SR.IMASK = Undefined (Interrupt Mask) - * - * Operations supposed to be performed by __stext: - * . prevent speculative fetch onto device memory while MMU is off - * . reflect as much as possible SH5 ABI (r15, r26, r27, r18) - * . first, save CPU state and set it to something harmless - * . any CPU detection and/or endianness settings (?) - * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD - * . set initial TLB entries for cached and uncached regions - * (no fine granularity paging) - * . set initial cache state - * . enable MMU and caches - * . set CPU to a consistent state - * . registers (including stack pointer and current/KCR0) - * . NOT expecting to set Exception handling nor VBR/RESVEC/DCR - * at this stage. This is all to later Linux initialization steps. - * . initialize FPU - * . clear BSS - * . jump into start_kernel() - * . be prepared to hopeless start_kernel() returns. - * - */ - .global _stext -_stext: - /* - * Prevent speculative fetch on device memory due to - * uninitialized target registers. - */ - ptabs/u ZERO, tr0 - ptabs/u ZERO, tr1 - ptabs/u ZERO, tr2 - ptabs/u ZERO, tr3 - ptabs/u ZERO, tr4 - ptabs/u ZERO, tr5 - ptabs/u ZERO, tr6 - ptabs/u ZERO, tr7 - synci - - /* - * Read/Set CPU state. After this block: - * r29 = Initial SR - */ - getcon SR, r29 - movi SR_HARMLESS, r20 - putcon r20, SR - - /* - * Initialize EMI/LMI. To Be Done. - */ - - /* - * CPU detection and/or endianness settings (?). To Be Done. - * Pure PIC code here, please ! Just save state into r30. - * After this block: - * r30 = CPU type/Platform Endianness - */ - - /* - * Set initial TLB entries for cached and uncached regions. - * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't ! - */ - /* Clear ITLBs */ - pta clear_ITLB, tr1 - movi MMUIR_FIRST, r21 - movi MMUIR_END, r22 -clear_ITLB: - putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */ - addi r21, MMUIR_STEP, r21 - bne r21, r22, tr1 - - /* Clear DTLBs */ - pta clear_DTLB, tr1 - movi MMUDR_FIRST, r21 - movi MMUDR_END, r22 -clear_DTLB: - putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */ - addi r21, MMUDR_STEP, r21 - bne r21, r22, tr1 - - /* Map one big (512Mb) page for ITLB */ - movi MMUIR_FIRST, r21 - movi MMUIR_TEXT_L, r22 /* PTEL first */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */ - movi MMUIR_TEXT_H, r22 /* PTEH last */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */ - - /* Map one big CACHED (512Mb) page for DTLB */ - movi MMUDR_FIRST, r21 - movi MMUDR_CACHED_L, r22 /* PTEL first */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */ - movi MMUDR_CACHED_H, r22 /* PTEH last */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */ - -#ifdef CONFIG_EARLY_PRINTK - /* - * Setup a DTLB translation for SCIF phys. - */ - addi r21, MMUDR_STEP, r21 - movi 0x0a03, r22 /* SCIF phys */ - shori 0x0148, r22 - putcfg r21, 1, r22 /* PTEL first */ - movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */ - shori 0x0003, r22 - putcfg r21, 0, r22 /* PTEH last */ -#endif - - /* - * Set cache behaviours. - */ - /* ICache */ - movi ICCR_BASE, r21 - movi ICCR0_INIT_VAL, r22 - movi ICCR1_INIT_VAL, r23 - putcfg r21, ICCR_REG0, r22 - putcfg r21, ICCR_REG1, r23 - - /* OCache */ - movi OCCR_BASE, r21 - movi OCCR0_INIT_VAL, r22 - movi OCCR1_INIT_VAL, r23 - putcfg r21, OCCR_REG0, r22 - putcfg r21, OCCR_REG1, r23 - - - /* - * Enable Caches and MMU. Do the first non-PIC jump. - * Now head.S global variables, constants and externs - * can be used. - */ - getcon SR, r21 - movi SR_ENABLE_MMU, r22 - or r21, r22, r21 - putcon r21, SSR - movi hyperspace, r22 - ori r22, 1, r22 /* Make it SHmedia, not required but..*/ - putcon r22, SPC - synco - rte /* And now go into the hyperspace ... */ -hyperspace: /* ... that's the next instruction ! */ - - /* - * Set CPU to a consistent state. - * r31 = FPU support flag - * tr0/tr7 in use. Others give a chance to loop somewhere safe - */ - movi start_kernel, r32 - ori r32, 1, r32 - - ptabs r32, tr0 /* r32 = _start_kernel address */ - pta/u hopeless, tr1 - pta/u hopeless, tr2 - pta/u hopeless, tr3 - pta/u hopeless, tr4 - pta/u hopeless, tr5 - pta/u hopeless, tr6 - pta/u hopeless, tr7 - gettr tr1, r28 /* r28 = hopeless address */ - - /* Set initial stack pointer */ - movi init_thread_union, SP - putcon SP, KCR0 /* Set current to init_task */ - movi THREAD_SIZE, r22 /* Point to the end */ - add SP, r22, SP - - /* - * Initialize FPU. - * Keep FPU flag in r31. After this block: - * r31 = FPU flag - */ - movi fpu_in_use, r31 /* Temporary */ - -#ifdef CONFIG_SH_FPU - getcon SR, r21 - movi SR_ENABLE_FPU, r22 - and r21, r22, r22 - putcon r22, SR /* Try to enable */ - getcon SR, r22 - xor r21, r22, r21 - shlri r21, 15, r21 /* Supposedly 0/1 */ - st.q r31, 0 , r21 /* Set fpu_in_use */ -#else - movi 0, r21 - st.q r31, 0 , r21 /* Set fpu_in_use */ -#endif - or r21, ZERO, r31 /* Set FPU flag at last */ - -#ifndef CONFIG_SH_NO_BSS_INIT -/* Don't clear BSS if running on slow platforms such as an RTL simulation, - remote memory via SHdebug link, etc. For these the memory can be guaranteed - to be all zero on boot anyway. */ - /* - * Clear bss - */ - pta clear_quad, tr1 - movi __bss_start, r22 - movi _end, r23 -clear_quad: - st.q r22, 0, ZERO - addi r22, 8, r22 - bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */ -#endif - pta/u hopeless, tr1 - - /* Say bye to head.S but be prepared to wrongly get back ... */ - blink tr0, LINK - - /* If we ever get back here through LINK/tr1-tr7 */ - pta/u hopeless, tr7 - -hopeless: - /* - * Something's badly wrong here. Loop endlessly, - * there's nothing more we can do about it. - * - * Note on hopeless: it can be jumped into invariably - * before or after jumping into hyperspace. The only - * requirement is to be PIC called (PTA) before and - * any way (PTA/PTABS) after. According to Virtual - * to Physical mapping a simulator/emulator can easily - * tell where we came here from just looking at hopeless - * (PC) address. - * - * For debugging purposes: - * (r28) hopeless/loop address - * (r29) Original SR - * (r30) CPU type/Platform endianness - * (r31) FPU Support - * (r32) _start_kernel address - */ - blink tr7, ZERO - - diff --git a/include/asm-sh/tlb.h b/include/asm-sh/tlb.h index 53d185bcf87..56ad1fb888a 100644 --- a/include/asm-sh/tlb.h +++ b/include/asm-sh/tlb.h @@ -1,6 +1,12 @@ #ifndef __ASM_SH_TLB_H #define __ASM_SH_TLB_H +#ifdef CONFIG_SUPERH64 +# include "tlb_64.h" +#endif + +#ifndef __ASSEMBLY__ + #define tlb_start_vma(tlb, vma) \ flush_cache_range(vma, vma->vm_start, vma->vm_end) @@ -15,4 +21,6 @@ #define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) #include -#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_H */ diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h new file mode 100644 index 00000000000..0308e05fc57 --- /dev/null +++ b/include/asm-sh/tlb_64.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/tlb_64.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_TLB_64_H +#define __ASM_SH_TLB_64_H + +/* ITLB defines */ +#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ +#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ + +/* DTLB defines */ +#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ +#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ + +#ifndef __ASSEMBLY__ + +/** + * for_each_dtlb_entry + * + * @tlb: TLB entry + * + * Iterate over free (non-wired) DTLB entries + */ +#define for_each_dtlb_entry(tlb) \ + for (tlb = cpu_data->dtlb.first; \ + tlb <= cpu_data->dtlb.last; \ + tlb += cpu_data->dtlb.step) + +/** + * for_each_itlb_entry + * + * @tlb: TLB entry + * + * Iterate over free (non-wired) ITLB entries + */ +#define for_each_itlb_entry(tlb) \ + for (tlb = cpu_data->itlb.first; \ + tlb <= cpu_data->itlb.last; \ + tlb += cpu_data->itlb.step) + +/** + * __flush_tlb_slot + * + * @slot: Address of TLB slot. + * + * Flushes TLB slot @slot. + */ +static inline void __flush_tlb_slot(unsigned long long slot) +{ + __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); +} + +/* arch/sh64/mm/tlb.c */ +int sh64_tlb_init(void); +unsigned long long sh64_next_free_dtlb_entry(void); +unsigned long long sh64_get_wired_dtlb_entry(void); +int sh64_put_wired_dtlb_entry(unsigned long long entry); +void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, + unsigned long asid, unsigned long paddr); +void sh64_teardown_tlb_slot(unsigned long long config_addr); + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_64_H */ diff --git a/include/asm-sh64/tlb.h b/include/asm-sh64/tlb.h deleted file mode 100644 index 4979408bd88..00000000000 --- a/include/asm-sh64/tlb.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * include/asm-sh64/tlb.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#ifndef __ASM_SH64_TLB_H -#define __ASM_SH64_TLB_H - -/* - * Note! These are mostly unused, we just need the xTLB_LAST_VAR_UNRESTRICTED - * for head.S! Once this limitation is gone, we can clean the rest of this up. - */ - -/* ITLB defines */ -#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ -#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ - -/* DTLB defines */ -#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ -#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ - -#ifndef __ASSEMBLY__ - -/** - * for_each_dtlb_entry - * - * @tlb: TLB entry - * - * Iterate over free (non-wired) DTLB entries - */ -#define for_each_dtlb_entry(tlb) \ - for (tlb = cpu_data->dtlb.first; \ - tlb <= cpu_data->dtlb.last; \ - tlb += cpu_data->dtlb.step) - -/** - * for_each_itlb_entry - * - * @tlb: TLB entry - * - * Iterate over free (non-wired) ITLB entries - */ -#define for_each_itlb_entry(tlb) \ - for (tlb = cpu_data->itlb.first; \ - tlb <= cpu_data->itlb.last; \ - tlb += cpu_data->itlb.step) - -/** - * __flush_tlb_slot - * - * @slot: Address of TLB slot. - * - * Flushes TLB slot @slot. - */ -static inline void __flush_tlb_slot(unsigned long long slot) -{ - __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); -} - -/* arch/sh64/mm/tlb.c */ -extern int sh64_tlb_init(void); -extern unsigned long long sh64_next_free_dtlb_entry(void); -extern unsigned long long sh64_get_wired_dtlb_entry(void); -extern int sh64_put_wired_dtlb_entry(unsigned long long entry); - -extern void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, unsigned long asid, unsigned long paddr); -extern void sh64_teardown_tlb_slot(unsigned long long config_addr); - -#define tlb_start_vma(tlb, vma) \ - flush_cache_range(vma, vma->vm_start, vma->vm_end) - -#define tlb_end_vma(tlb, vma) \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -/* - * Flush whole TLBs for MM - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_SH64_TLB_H */ - -- cgit v1.2.3-70-g09d2 From 0468b4bb125542e75e39f08ebaa74a7daf845631 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:39:06 +0900 Subject: sh: Fix up VMALLOC_START for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/pgtable.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 6ab3ba82d25..b0bb76a6864 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -71,7 +71,11 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define PTE_PHYS_MASK (0x20000000 - PAGE_SIZE) +#ifdef CONFIG_SUPERH32 #define VMALLOC_START (P3SEG) +#else +#define VMALLOC_START (0xf0000000) +#endif #define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) /* -- cgit v1.2.3-70-g09d2 From f3ef75b773b38fe2028fa4627cab3991e2c60180 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:39:32 +0900 Subject: sh: Nopped out p3_cache_init() on SH-5 also. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/cacheflush.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/include/asm-sh/cpu-sh5/cacheflush.h index 847374b6526..45d12d6f89c 100644 --- a/include/asm-sh/cpu-sh5/cacheflush.h +++ b/include/asm-sh/cpu-sh5/cacheflush.h @@ -27,6 +27,7 @@ extern void flush_icache_user_range(struct vm_area_struct *vma, #define flush_dcache_mmap_unlock(mapping) do { } while (0) #define flush_icache_page(vma, page) do { } while (0) +#define p3_cache_init() do { } while (0) #endif /* __ASSEMBLY__ */ -- cgit v1.2.3-70-g09d2 From acb499f0ddfbea1176a70d93eb53943c325a073b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 10 Nov 2007 20:39:56 +0900 Subject: sh: Move vsyscall_init() defs up one level. Signed-off-by: Paul Mundt --- include/asm-sh/processor.h | 6 ++++++ include/asm-sh/processor_32.h | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index b98c882d503..76c4dc7021c 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -49,4 +49,10 @@ enum cpu_type { /* arch/sh/kernel/setup.c */ const char *get_cpu_subtype(struct sh_cpuinfo *c); +#ifdef CONFIG_VSYSCALL +int vsyscall_init(void); +#else +#define vsyscall_init() do { } while (0) +#endif + #endif /* __ASM_SH_PROCESSOR_H */ diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index 35040fe43e5..1ad74633c00 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -237,11 +237,5 @@ static inline void prefetch(void *x) #define prefetchw(x) prefetch(x) #endif -#ifdef CONFIG_VSYSCALL -extern int vsyscall_init(void); -#else -#define vsyscall_init() do { } while (0) -#endif - #endif /* __KERNEL__ */ #endif /* __ASM_SH_PROCESSOR_32_H */ -- cgit v1.2.3-70-g09d2 From 8a7bcf0dd0d49fe8b0071adef0dfe8610abdffaa Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 11 Nov 2007 17:07:06 +0900 Subject: sh: Add SH-5 support to the consistent DMA impl. Signed-off-by: Paul Mundt --- arch/sh/mm/consistent.c | 46 +++++++++++++++++++++++++++----------------- include/asm-sh/dma-mapping.h | 4 ++-- 2 files changed, 30 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index e220c29a3c0..65ad30031ad 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -1,7 +1,7 @@ /* * arch/sh/mm/consistent.c * - * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,7 +16,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) { struct page *page, *end, *free; - void *ret; + void *ret, *vp; int order; size = PAGE_ALIGN(size); @@ -28,13 +28,20 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) split_page(page, order); ret = page_address(page); - memset(ret, 0, size); *handle = virt_to_phys(ret); + vp = ioremap_nocache(*handle, size); + if (!vp) { + free_pages((unsigned long)ret, order); + return NULL; + } + + memset(vp, 0, size); + /* * We must flush the cache before we pass it on to the device */ - __flush_purge_region(ret, size); + dma_cache_sync(NULL, ret, size, DMA_BIDIRECTIONAL); page = virt_to_page(ret); free = page + (size >> PAGE_SHIFT); @@ -47,24 +54,31 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) } } - return P2SEGADDR(ret); + return vp; } +EXPORT_SYMBOL(consistent_alloc); -void consistent_free(void *vaddr, size_t size) +void consistent_free(void *vaddr, size_t size, dma_addr_t dma_handle) { - unsigned long addr = P1SEGADDR((unsigned long)vaddr); - struct page *page=virt_to_page(addr); - int num_pages=(size+PAGE_SIZE-1) >> PAGE_SHIFT; - int i; + struct page *page; + unsigned long addr; - for(i=0;i Date: Sun, 11 Nov 2007 17:28:18 +0900 Subject: sh: Plug in SH-5 ffz()/__ffs() bitops. Signed-off-by: Paul Mundt --- include/asm-sh/bitops.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include') diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h index df805f20b26..a7bd81a7f06 100644 --- a/include/asm-sh/bitops.h +++ b/include/asm-sh/bitops.h @@ -105,6 +105,7 @@ static inline int test_and_change_bit(int nr, volatile void * addr) #include +#ifdef CONFIG_SUPERH32 static inline unsigned long ffz(unsigned long word) { unsigned long result; @@ -138,6 +139,31 @@ static inline unsigned long __ffs(unsigned long word) : "t"); return result; } +#else +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result, __d2, __d3; + + __asm__("gettr tr0, %2\n\t" + "pta $+32, tr0\n\t" + "andi %1, 1, %3\n\t" + "beq %3, r63, tr0\n\t" + "pta $+4, tr0\n" + "0:\n\t" + "shlri.l %1, 1, %1\n\t" + "addi %0, 1, %0\n\t" + "andi %1, 1, %3\n\t" + "beqi %3, 1, tr0\n" + "1:\n\t" + "ptabs %2, tr0\n\t" + : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) + : "0" (0L), "1" (word)); + + return result; +} + +#include +#endif #include #include -- cgit v1.2.3-70-g09d2 From fcfdd0f14f94d47f2f650a24cd111e11475ccada Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 11 Nov 2007 17:36:13 +0900 Subject: sh: Split out checksum.h in to _32 and _64 variants. Signed-off-by: Paul Mundt --- arch/sh/kernel/sh_ksyms.c | 2 + include/asm-sh/checksum.h | 216 +------------------------------------------ include/asm-sh/checksum_32.h | 215 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/checksum_64.h | 80 ++++++++++++++++ include/asm-sh64/checksum.h | 82 ---------------- 5 files changed, 300 insertions(+), 295 deletions(-) create mode 100644 include/asm-sh/checksum_32.h create mode 100644 include/asm-sh/checksum_64.h delete mode 100644 include/asm-sh64/checksum.h (limited to 'include') diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index e1a6de9088b..bc5239ef88c 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -141,7 +141,9 @@ EXPORT_SYMBOL(clear_user_page); #endif EXPORT_SYMBOL(csum_partial); +#ifdef CONFIG_SUPERH32 EXPORT_SYMBOL(csum_partial_copy_generic); +#endif #ifdef CONFIG_IPV6 EXPORT_SYMBOL(csum_ipv6_magic); #endif diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h index 4bc8357e889..67496ab0ef0 100644 --- a/include/asm-sh/checksum.h +++ b/include/asm-sh/checksum.h @@ -1,215 +1,5 @@ -#ifndef __ASM_SH_CHECKSUM_H -#define __ASM_SH_CHECKSUM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka - */ - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums, and handles user-space pointer exceptions correctly, when needed. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, - int *src_err_ptr, int *dst_err_ptr); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ -static inline -__wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) -{ - return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); -} - -static inline -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) -{ - return csum_partial_copy_generic((__force const void *)src, dst, - len, sum, err_ptr, NULL); -} - -/* - * Fold a partial checksum - */ - -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int __dummy; - __asm__("swap.w %0, %1\n\t" - "extu.w %0, %0\n\t" - "extu.w %1, %1\n\t" - "add %1, %0\n\t" - "swap.w %0, %1\n\t" - "add %1, %0\n\t" - "not %0, %0\n\t" - : "=r" (sum), "=&r" (__dummy) - : "0" (sum) - : "t"); - return (__force __sum16)sum; -} - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - * i386 version by Jorge Cwik , adapted - * for linux by * Arnt Gulbrandsen. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int sum, __dummy0, __dummy1; - - __asm__ __volatile__( - "mov.l @%1+, %0\n\t" - "mov.l @%1+, %3\n\t" - "add #-2, %2\n\t" - "clrt\n\t" - "1:\t" - "addc %3, %0\n\t" - "movt %4\n\t" - "mov.l @%1+, %3\n\t" - "dt %2\n\t" - "bf/s 1b\n\t" - " cmp/eq #1, %4\n\t" - "addc %3, %0\n\t" - "addc %2, %0" /* Here %2 is 0, add carry-bit */ - /* Since the input registers which are loaded with iph and ihl - are modified, we must also specify them as outputs, or gcc - will assume they contain their original values. */ - : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) - : "1" (iph), "2" (ihl) - : "t"); - - return csum_fold(sum); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ -#ifdef __LITTLE_ENDIAN__ - unsigned long len_proto = (proto + len) << 8; +#ifdef CONFIG_SUPERH32 +# include "checksum_32.h" #else - unsigned long len_proto = proto + len; +# include "checksum_64.h" #endif - __asm__("clrt\n\t" - "addc %0, %1\n\t" - "addc %2, %1\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "add %1, %0" - : "=r" (sum), "=r" (len_proto) - : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) - : "t"); - - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#define _HAVE_ARCH_IPV6_CSUM -static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - unsigned int __dummy; - __asm__("clrt\n\t" - "mov.l @(0,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(4,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(8,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(12,%2), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(0,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(4,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(8,%3), %1\n\t" - "addc %1, %0\n\t" - "mov.l @(12,%3), %1\n\t" - "addc %1, %0\n\t" - "addc %4, %0\n\t" - "addc %5, %0\n\t" - "movt %1\n\t" - "add %1, %0\n" - : "=r" (sum), "=&r" (__dummy) - : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) - : "t"); - - return csum_fold(sum); -} - -/* - * Copy and checksum to user - */ -#define HAVE_CSUM_COPY_USER -static inline __wsum csum_and_copy_to_user(const void *src, - void __user *dst, - int len, __wsum sum, - int *err_ptr) -{ - if (access_ok(VERIFY_WRITE, dst, len)) - return csum_partial_copy_generic((__force const void *)src, - dst, len, sum, NULL, err_ptr); - - if (len) - *err_ptr = -EFAULT; - - return (__force __wsum)-1; /* invalid checksum */ -} -#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h new file mode 100644 index 00000000000..4bc8357e889 --- /dev/null +++ b/include/asm-sh/checksum_32.h @@ -0,0 +1,215 @@ +#ifndef __ASM_SH_CHECKSUM_H +#define __ASM_SH_CHECKSUM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka + */ + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, + int len, __wsum sum, + int *src_err_ptr, int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ +static inline +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum) +{ + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); +} + +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr) +{ + return csum_partial_copy_generic((__force const void *)src, dst, + len, sum, err_ptr, NULL); +} + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int __dummy; + __asm__("swap.w %0, %1\n\t" + "extu.w %0, %0\n\t" + "extu.w %1, %1\n\t" + "add %1, %0\n\t" + "swap.w %0, %1\n\t" + "add %1, %0\n\t" + "not %0, %0\n\t" + : "=r" (sum), "=&r" (__dummy) + : "0" (sum) + : "t"); + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * i386 version by Jorge Cwik , adapted + * for linux by * Arnt Gulbrandsen. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum, __dummy0, __dummy1; + + __asm__ __volatile__( + "mov.l @%1+, %0\n\t" + "mov.l @%1+, %3\n\t" + "add #-2, %2\n\t" + "clrt\n\t" + "1:\t" + "addc %3, %0\n\t" + "movt %4\n\t" + "mov.l @%1+, %3\n\t" + "dt %2\n\t" + "bf/s 1b\n\t" + " cmp/eq #1, %4\n\t" + "addc %3, %0\n\t" + "addc %2, %0" /* Here %2 is 0, add carry-bit */ + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) + : "1" (iph), "2" (ihl) + : "t"); + + return csum_fold(sum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#ifdef __LITTLE_ENDIAN__ + unsigned long len_proto = (proto + len) << 8; +#else + unsigned long len_proto = proto + len; +#endif + __asm__("clrt\n\t" + "addc %0, %1\n\t" + "addc %2, %1\n\t" + "addc %3, %1\n\t" + "movt %0\n\t" + "add %1, %0" + : "=r" (sum), "=r" (len_proto) + : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) + : "t"); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + unsigned int __dummy; + __asm__("clrt\n\t" + "mov.l @(0,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(0,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%3), %1\n\t" + "addc %1, %0\n\t" + "addc %4, %0\n\t" + "addc %5, %0\n\t" + "movt %1\n\t" + "add %1, %0\n" + : "=r" (sum), "=&r" (__dummy) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "t"); + + return csum_fold(sum); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static inline __wsum csum_and_copy_to_user(const void *src, + void __user *dst, + int len, __wsum sum, + int *err_ptr) +{ + if (access_ok(VERIFY_WRITE, dst, len)) + return csum_partial_copy_generic((__force const void *)src, + dst, len, sum, NULL, err_ptr); + + if (len) + *err_ptr = -EFAULT; + + return (__force __wsum)-1; /* invalid checksum */ +} +#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/include/asm-sh/checksum_64.h b/include/asm-sh/checksum_64.h new file mode 100644 index 00000000000..ec79b92e6bd --- /dev/null +++ b/include/asm-sh/checksum_64.h @@ -0,0 +1,80 @@ +#ifndef __ASM_SH64_CHECKSUM_H +#define __ASM_SH64_CHECKSUM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/checksum.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + */ + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ + + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, + __wsum sum); + +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr); + +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return (__force __sum16)~sum; +} + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* __ASM_SH64_CHECKSUM_H */ + diff --git a/include/asm-sh64/checksum.h b/include/asm-sh64/checksum.h deleted file mode 100644 index ba594ccb42e..00000000000 --- a/include/asm-sh64/checksum.h +++ /dev/null @@ -1,82 +0,0 @@ -#ifndef __ASM_SH64_CHECKSUM_H -#define __ASM_SH64_CHECKSUM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/checksum.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#include - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the - * access_ok(). - */ - - -__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, - __wsum sum); - -__wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr); - -static inline __sum16 csum_fold(__wsum csum) -{ - u32 sum = (__force u32)csum; - sum = (sum & 0xffff) + (sum >> 16); - sum = (sum & 0xffff) + (sum >> 16); - return (__force __sum16)~sum; -} - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, unsigned short proto, - __wsum sum); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* __ASM_SH64_CHECKSUM_H */ - -- cgit v1.2.3-70-g09d2 From 1b6cf8175e52cbda111ab8b590da6a1d093e9954 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 11 Nov 2007 17:46:49 +0900 Subject: sh: Split out syscall ABI for _32 and _64 variants. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_32 | 4 +- arch/sh/kernel/Makefile_64 | 4 +- arch/sh/kernel/syscalls.S | 343 ----------------------------------- arch/sh/kernel/syscalls_32.S | 343 +++++++++++++++++++++++++++++++++++ arch/sh/kernel/syscalls_64.S | 381 +++++++++++++++++++++++++++++++++++++++ arch/sh64/kernel/syscalls.S | 381 --------------------------------------- include/asm-sh/unistd.h | 379 +-------------------------------------- include/asm-sh/unistd_32.h | 376 ++++++++++++++++++++++++++++++++++++++ include/asm-sh/unistd_64.h | 417 +++++++++++++++++++++++++++++++++++++++++++ include/asm-sh64/unistd.h | 417 ------------------------------------------- 10 files changed, 1525 insertions(+), 1520 deletions(-) delete mode 100644 arch/sh/kernel/syscalls.S create mode 100644 arch/sh/kernel/syscalls_32.S create mode 100644 arch/sh/kernel/syscalls_64.S delete mode 100644 arch/sh64/kernel/syscalls.S create mode 100644 include/asm-sh/unistd_32.h create mode 100644 include/asm-sh/unistd_64.h delete mode 100644 include/asm-sh64/unistd.h (limited to 'include') diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 35be5e9674f..c5a85bfbd45 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -5,8 +5,8 @@ extra-y := head_32.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ - ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o syscalls.o \ - time.o topology.o traps_32.o + ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o \ + syscalls_32.o time.o topology.o traps_32.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index 6e72ed4c07f..41b3efc2568 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -1,8 +1,8 @@ extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ - ptrace_64.o semaphore.o setup.o signal_64.o sys_sh64.o syscalls.o \ - time.o topology.o traps_64.o + ptrace_64.o semaphore.o setup.o signal_64.o sys_sh64.o \ + syscalls_64.o time.o topology.o traps_64.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S deleted file mode 100644 index 10bec45415b..00000000000 --- a/arch/sh/kernel/syscalls.S +++ /dev/null @@ -1,343 +0,0 @@ -/* - * arch/sh/kernel/syscalls.S - * - * System call table for SuperH - * - * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include -#include - - .data -ENTRY(sys_call_table) - .long sys_restart_syscall /* 0 - old "setup()" system call*/ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long old_readdir - .long old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_uname - .long sys_ni_syscall /* 110 */ /* iopl */ - .long sys_vhangup - .long sys_ni_syscall /* idle */ - .long sys_ni_syscall /* vm86old */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* sys_modify_ldt */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* vm86 */ - .long sys_ni_syscall /* old "query_module" */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread_wrapper /* 180 */ - .long sys_pwrite_wrapper - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall - .long sys_ni_syscall - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64_wrapper - .long sys_ni_syscall /* Reserved for vserver */ - .long sys_mbind - .long sys_get_mempolicy /* 275 */ - .long sys_set_mempolicy - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_kexec_load - .long sys_waitid - .long sys_add_key /* 285 */ - .long sys_request_key - .long sys_keyctl - .long sys_ioprio_set - .long sys_ioprio_get - .long sys_inotify_init /* 290 */ - .long sys_inotify_add_watch - .long sys_inotify_rm_watch - .long sys_ni_syscall - .long sys_migrate_pages - .long sys_openat /* 295 */ - .long sys_mkdirat - .long sys_mknodat - .long sys_fchownat - .long sys_futimesat - .long sys_fstatat64 /* 300 */ - .long sys_unlinkat - .long sys_renameat - .long sys_linkat - .long sys_symlinkat - .long sys_readlinkat /* 305 */ - .long sys_fchmodat - .long sys_faccessat - .long sys_pselect6 - .long sys_ppoll - .long sys_unshare /* 310 */ - .long sys_set_robust_list - .long sys_get_robust_list - .long sys_splice - .long sys_sync_file_range - .long sys_tee /* 315 */ - .long sys_vmsplice - .long sys_move_pages - .long sys_getcpu - .long sys_epoll_pwait - .long sys_utimensat /* 320 */ - .long sys_signalfd - .long sys_timerfd - .long sys_eventfd - .long sys_fallocate diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S new file mode 100644 index 00000000000..10bec45415b --- /dev/null +++ b/arch/sh/kernel/syscalls_32.S @@ -0,0 +1,343 @@ +/* + * arch/sh/kernel/syscalls.S + * + * System call table for SuperH + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include +#include + + .data +ENTRY(sys_call_table) + .long sys_restart_syscall /* 0 - old "setup()" system call*/ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* sys_olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_ni_syscall /* sys_oldselect */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_uname + .long sys_ni_syscall /* 110 */ /* iopl */ + .long sys_vhangup + .long sys_ni_syscall /* idle */ + .long sys_ni_syscall /* vm86old */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* vm86 */ + .long sys_ni_syscall /* old "query_module" */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread_wrapper /* 180 */ + .long sys_pwrite_wrapper + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall /* Reserved for Security */ + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall + .long sys_ni_syscall + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64_wrapper + .long sys_ni_syscall /* Reserved for vserver */ + .long sys_mbind + .long sys_get_mempolicy /* 275 */ + .long sys_set_mempolicy + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_kexec_load + .long sys_waitid + .long sys_add_key /* 285 */ + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init /* 290 */ + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_ni_syscall + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd + .long sys_fallocate diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S new file mode 100644 index 00000000000..abb94c05d07 --- /dev/null +++ b/arch/sh/kernel/syscalls_64.S @@ -0,0 +1,381 @@ +/* + * arch/sh64/kernel/syscalls.S + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2004 - 2007 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include + + .section .data, "aw" + .balign 32 + +/* + * System calls jump table + */ + .globl sys_call_table +sys_call_table: + .long sys_restart_syscall /* 0 - old "setup()" system call */ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sh64_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys( */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* sys_olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_ni_syscall /* sys_oldselect */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm */ + .long sys_socketcall /* Obsolete implementation of socket syscall */ + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_uname + .long sys_ni_syscall /* 110 */ /* iopl */ + .long sys_vhangup + .long sys_ni_syscall /* idle */ + .long sys_ni_syscall /* vm86old */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc /* Obsolete ipc syscall implementation */ + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* vm86 */ + .long sys_ni_syscall /* old "query_module" */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + /* Broken-out socket family (maintain backwards compatibility in syscall + numbering with 2.4) */ + .long sys_socket /* 220 */ + .long sys_bind + .long sys_connect + .long sys_listen + .long sys_accept + .long sys_getsockname /* 225 */ + .long sys_getpeername + .long sys_socketpair + .long sys_send + .long sys_sendto + .long sys_recv /* 230*/ + .long sys_recvfrom + .long sys_shutdown + .long sys_setsockopt + .long sys_getsockopt + .long sys_sendmsg /* 235 */ + .long sys_recvmsg + /* Broken-out IPC family (maintain backwards compatibility in syscall + numbering with 2.4) */ + .long sys_semop + .long sys_semget + .long sys_semctl + .long sys_msgsnd /* 240 */ + .long sys_msgrcv + .long sys_msgget + .long sys_msgctl + .long sys_shmat + .long sys_shmdt /* 245 */ + .long sys_shmget + .long sys_shmctl + /* Rest of syscalls listed in 2.4 i386 unistd.h */ + .long sys_getdents64 + .long sys_fcntl64 + .long sys_ni_syscall /* 250 reserved for TUX */ + .long sys_ni_syscall /* Reserved for Security */ + .long sys_gettid + .long sys_readahead + .long sys_setxattr + .long sys_lsetxattr /* 255 */ + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr + .long sys_fgetxattr + .long sys_listxattr /* 260 */ + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr + .long sys_lremovexattr + .long sys_fremovexattr /* 265 */ + .long sys_tkill + .long sys_sendfile64 + .long sys_futex + .long sys_sched_setaffinity + .long sys_sched_getaffinity /* 270 */ + .long sys_ni_syscall + .long sys_ni_syscall + .long sys_io_setup + .long sys_io_destroy + .long sys_io_getevents /* 275 */ + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 + .long sys_ni_syscall + .long sys_exit_group /* 280 */ + /* Rest of new 2.6 syscalls */ + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl + .long sys_epoll_wait + .long sys_remap_file_pages /* 285 */ + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime + .long sys_timer_gettime + .long sys_timer_getoverrun /* 290 */ + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime + .long sys_clock_getres + .long sys_clock_nanosleep /* 295 */ + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill + .long sys_utimes + .long sys_fadvise64_64 /* 300 */ + .long sys_ni_syscall /* Reserved for vserver */ + .long sys_ni_syscall /* Reserved for mbind */ + .long sys_ni_syscall /* get_mempolicy */ + .long sys_ni_syscall /* set_mempolicy */ + .long sys_mq_open /* 305 */ + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive + .long sys_mq_notify + .long sys_mq_getsetattr /* 310 */ + .long sys_ni_syscall /* Reserved for kexec */ + .long sys_waitid + .long sys_add_key + .long sys_request_key + .long sys_keyctl /* 315 */ + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch /* 320 */ + .long sys_ni_syscall + .long sys_migrate_pages + .long sys_openat + .long sys_mkdirat + .long sys_mknodat /* 325 */ + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 + .long sys_unlinkat + .long sys_renameat /* 330 */ + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat + .long sys_fchmodat + .long sys_faccessat /* 335 */ + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare + .long sys_set_robust_list + .long sys_get_robust_list /* 340 */ + .long sys_splice + .long sys_sync_file_range + .long sys_tee + .long sys_vmsplice + .long sys_move_pages /* 345 */ + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat + .long sys_signalfd + .long sys_timerfd /* 350 */ + .long sys_eventfd + .long sys_fallocate diff --git a/arch/sh64/kernel/syscalls.S b/arch/sh64/kernel/syscalls.S deleted file mode 100644 index abb94c05d07..00000000000 --- a/arch/sh64/kernel/syscalls.S +++ /dev/null @@ -1,381 +0,0 @@ -/* - * arch/sh64/kernel/syscalls.S - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 - 2007 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include - - .section .data, "aw" - .balign 32 - -/* - * System calls jump table - */ - .globl sys_call_table -sys_call_table: - .long sys_restart_syscall /* 0 - old "setup()" system call */ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sh64_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys( */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long old_readdir - .long old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm */ - .long sys_socketcall /* Obsolete implementation of socket syscall */ - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_uname - .long sys_ni_syscall /* 110 */ /* iopl */ - .long sys_vhangup - .long sys_ni_syscall /* idle */ - .long sys_ni_syscall /* vm86old */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc /* Obsolete ipc syscall implementation */ - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* sys_modify_ldt */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* vm86 */ - .long sys_ni_syscall /* old "query_module" */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - /* Broken-out socket family (maintain backwards compatibility in syscall - numbering with 2.4) */ - .long sys_socket /* 220 */ - .long sys_bind - .long sys_connect - .long sys_listen - .long sys_accept - .long sys_getsockname /* 225 */ - .long sys_getpeername - .long sys_socketpair - .long sys_send - .long sys_sendto - .long sys_recv /* 230*/ - .long sys_recvfrom - .long sys_shutdown - .long sys_setsockopt - .long sys_getsockopt - .long sys_sendmsg /* 235 */ - .long sys_recvmsg - /* Broken-out IPC family (maintain backwards compatibility in syscall - numbering with 2.4) */ - .long sys_semop - .long sys_semget - .long sys_semctl - .long sys_msgsnd /* 240 */ - .long sys_msgrcv - .long sys_msgget - .long sys_msgctl - .long sys_shmat - .long sys_shmdt /* 245 */ - .long sys_shmget - .long sys_shmctl - /* Rest of syscalls listed in 2.4 i386 unistd.h */ - .long sys_getdents64 - .long sys_fcntl64 - .long sys_ni_syscall /* 250 reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead - .long sys_setxattr - .long sys_lsetxattr /* 255 */ - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr - .long sys_fgetxattr - .long sys_listxattr /* 260 */ - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr - .long sys_lremovexattr - .long sys_fremovexattr /* 265 */ - .long sys_tkill - .long sys_sendfile64 - .long sys_futex - .long sys_sched_setaffinity - .long sys_sched_getaffinity /* 270 */ - .long sys_ni_syscall - .long sys_ni_syscall - .long sys_io_setup - .long sys_io_destroy - .long sys_io_getevents /* 275 */ - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 - .long sys_ni_syscall - .long sys_exit_group /* 280 */ - /* Rest of new 2.6 syscalls */ - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl - .long sys_epoll_wait - .long sys_remap_file_pages /* 285 */ - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime - .long sys_timer_gettime - .long sys_timer_getoverrun /* 290 */ - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime - .long sys_clock_getres - .long sys_clock_nanosleep /* 295 */ - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill - .long sys_utimes - .long sys_fadvise64_64 /* 300 */ - .long sys_ni_syscall /* Reserved for vserver */ - .long sys_ni_syscall /* Reserved for mbind */ - .long sys_ni_syscall /* get_mempolicy */ - .long sys_ni_syscall /* set_mempolicy */ - .long sys_mq_open /* 305 */ - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive - .long sys_mq_notify - .long sys_mq_getsetattr /* 310 */ - .long sys_ni_syscall /* Reserved for kexec */ - .long sys_waitid - .long sys_add_key - .long sys_request_key - .long sys_keyctl /* 315 */ - .long sys_ioprio_set - .long sys_ioprio_get - .long sys_inotify_init - .long sys_inotify_add_watch - .long sys_inotify_rm_watch /* 320 */ - .long sys_ni_syscall - .long sys_migrate_pages - .long sys_openat - .long sys_mkdirat - .long sys_mknodat /* 325 */ - .long sys_fchownat - .long sys_futimesat - .long sys_fstatat64 - .long sys_unlinkat - .long sys_renameat /* 330 */ - .long sys_linkat - .long sys_symlinkat - .long sys_readlinkat - .long sys_fchmodat - .long sys_faccessat /* 335 */ - .long sys_pselect6 - .long sys_ppoll - .long sys_unshare - .long sys_set_robust_list - .long sys_get_robust_list /* 340 */ - .long sys_splice - .long sys_sync_file_range - .long sys_tee - .long sys_vmsplice - .long sys_move_pages /* 345 */ - .long sys_getcpu - .long sys_epoll_pwait - .long sys_utimensat - .long sys_signalfd - .long sys_timerfd /* 350 */ - .long sys_eventfd - .long sys_fallocate diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index b182b1cb05f..4b21f369c28 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -1,376 +1,5 @@ -#ifndef __ASM_SH_UNISTD_H -#define __ASM_SH_UNISTD_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_streams1 188 /* some people actually want it */ -#define __NR_streams2 189 /* some people actually want it */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -/* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 285 -#define __NR_request_key 286 -#define __NR_keyctl 287 -#define __NR_ioprio_set 288 -#define __NR_ioprio_get 289 -#define __NR_inotify_init 290 -#define __NR_inotify_add_watch 291 -#define __NR_inotify_rm_watch 292 -/* 293 is unused */ -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 - -#define NR_syscalls 325 - -#ifdef __KERNEL__ - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +#else +# include "unistd_64.h" #endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_UNISTD_H */ diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h new file mode 100644 index 00000000000..b182b1cb05f --- /dev/null +++ b/include/asm-sh/unistd_32.h @@ -0,0 +1,376 @@ +#ifndef __ASM_SH_UNISTD_H +#define __ASM_SH_UNISTD_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 +/* 293 is unused */ +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 + +#define NR_syscalls 325 + +#ifdef __KERNEL__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_H */ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h new file mode 100644 index 00000000000..1a5197f369b --- /dev/null +++ b/include/asm-sh/unistd_64.h @@ -0,0 +1,417 @@ +#ifndef __ASM_SH64_UNISTD_H +#define __ASM_SH64_UNISTD_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/unistd.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2004 Sean McGoogan + * + * This file contains the system call numbers. + * + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 /* old implementation of socket systemcall */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +/* Non-multiplexed socket family */ +#define __NR_socket 220 +#define __NR_bind 221 +#define __NR_connect 222 +#define __NR_listen 223 +#define __NR_accept 224 +#define __NR_getsockname 225 +#define __NR_getpeername 226 +#define __NR_socketpair 227 +#define __NR_send 228 +#define __NR_sendto 229 +#define __NR_recv 230 +#define __NR_recvfrom 231 +#define __NR_shutdown 232 +#define __NR_setsockopt 233 +#define __NR_getsockopt 234 +#define __NR_sendmsg 235 +#define __NR_recvmsg 236 + +/* Non-multiplexed IPC family */ +#define __NR_semop 237 +#define __NR_semget 238 +#define __NR_semctl 239 +#define __NR_msgsnd 240 +#define __NR_msgrcv 241 +#define __NR_msgget 242 +#define __NR_msgctl 243 +#if 0 +#define __NR_shmatcall 244 +#endif +#define __NR_shmdt 245 +#define __NR_shmget 246 +#define __NR_shmctl 247 + +#define __NR_getdents64 248 +#define __NR_fcntl64 249 +/* 223 is unused */ +#define __NR_gettid 252 +#define __NR_readahead 253 +#define __NR_setxattr 254 +#define __NR_lsetxattr 255 +#define __NR_fsetxattr 256 +#define __NR_getxattr 257 +#define __NR_lgetxattr 258 +#define __NR_fgetxattr 269 +#define __NR_listxattr 260 +#define __NR_llistxattr 261 +#define __NR_flistxattr 262 +#define __NR_removexattr 263 +#define __NR_lremovexattr 264 +#define __NR_fremovexattr 265 +#define __NR_tkill 266 +#define __NR_sendfile64 267 +#define __NR_futex 268 +#define __NR_sched_setaffinity 269 +#define __NR_sched_getaffinity 270 +#define __NR_set_thread_area 271 +#define __NR_get_thread_area 272 +#define __NR_io_setup 273 +#define __NR_io_destroy 274 +#define __NR_io_getevents 275 +#define __NR_io_submit 276 +#define __NR_io_cancel 277 +#define __NR_fadvise64 278 +#define __NR_exit_group 280 + +#define __NR_lookup_dcookie 281 +#define __NR_epoll_create 282 +#define __NR_epoll_ctl 283 +#define __NR_epoll_wait 284 +#define __NR_remap_file_pages 285 +#define __NR_set_tid_address 286 +#define __NR_timer_create 287 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 296 +#define __NR_fstatfs64 297 +#define __NR_tgkill 298 +#define __NR_utimes 299 +#define __NR_fadvise64_64 300 +#define __NR_vserver 301 +#define __NR_mbind 302 +#define __NR_get_mempolicy 303 +#define __NR_set_mempolicy 304 +#define __NR_mq_open 305 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 311 +#define __NR_waitid 312 +#define __NR_add_key 313 +#define __NR_request_key 314 +#define __NR_keyctl 315 +#define __NR_ioprio_set 316 +#define __NR_ioprio_get 317 +#define __NR_inotify_init 318 +#define __NR_inotify_add_watch 319 +#define __NR_inotify_rm_watch 320 +/* 321 is unused */ +#define __NR_migrate_pages 322 +#define __NR_openat 323 +#define __NR_mkdirat 324 +#define __NR_mknodat 325 +#define __NR_fchownat 326 +#define __NR_futimesat 327 +#define __NR_fstatat64 328 +#define __NR_unlinkat 329 +#define __NR_renameat 330 +#define __NR_linkat 331 +#define __NR_symlinkat 332 +#define __NR_readlinkat 333 +#define __NR_fchmodat 334 +#define __NR_faccessat 335 +#define __NR_pselect6 336 +#define __NR_ppoll 337 +#define __NR_unshare 338 +#define __NR_set_robust_list 339 +#define __NR_get_robust_list 340 +#define __NR_splice 341 +#define __NR_sync_file_range 342 +#define __NR_tee 343 +#define __NR_vmsplice 344 +#define __NR_move_pages 345 +#define __NR_getcpu 346 +#define __NR_epoll_pwait 347 +#define __NR_utimensat 348 +#define __NR_signalfd 349 +#define __NR_timerfd 350 +#define __NR_eventfd 351 +#define __NR_fallocate 352 + +#ifdef __KERNEL__ + +#define NR_syscalls 353 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH64_UNISTD_H */ diff --git a/include/asm-sh64/unistd.h b/include/asm-sh64/unistd.h deleted file mode 100644 index 1a5197f369b..00000000000 --- a/include/asm-sh64/unistd.h +++ /dev/null @@ -1,417 +0,0 @@ -#ifndef __ASM_SH64_UNISTD_H -#define __ASM_SH64_UNISTD_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/unistd.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2004 Sean McGoogan - * - * This file contains the system call numbers. - * - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 /* old implementation of socket systemcall */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86old 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_vm86 166 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_streams1 188 /* some people actually want it */ -#define __NR_streams2 189 /* some people actually want it */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -/* Non-multiplexed socket family */ -#define __NR_socket 220 -#define __NR_bind 221 -#define __NR_connect 222 -#define __NR_listen 223 -#define __NR_accept 224 -#define __NR_getsockname 225 -#define __NR_getpeername 226 -#define __NR_socketpair 227 -#define __NR_send 228 -#define __NR_sendto 229 -#define __NR_recv 230 -#define __NR_recvfrom 231 -#define __NR_shutdown 232 -#define __NR_setsockopt 233 -#define __NR_getsockopt 234 -#define __NR_sendmsg 235 -#define __NR_recvmsg 236 - -/* Non-multiplexed IPC family */ -#define __NR_semop 237 -#define __NR_semget 238 -#define __NR_semctl 239 -#define __NR_msgsnd 240 -#define __NR_msgrcv 241 -#define __NR_msgget 242 -#define __NR_msgctl 243 -#if 0 -#define __NR_shmatcall 244 -#endif -#define __NR_shmdt 245 -#define __NR_shmget 246 -#define __NR_shmctl 247 - -#define __NR_getdents64 248 -#define __NR_fcntl64 249 -/* 223 is unused */ -#define __NR_gettid 252 -#define __NR_readahead 253 -#define __NR_setxattr 254 -#define __NR_lsetxattr 255 -#define __NR_fsetxattr 256 -#define __NR_getxattr 257 -#define __NR_lgetxattr 258 -#define __NR_fgetxattr 269 -#define __NR_listxattr 260 -#define __NR_llistxattr 261 -#define __NR_flistxattr 262 -#define __NR_removexattr 263 -#define __NR_lremovexattr 264 -#define __NR_fremovexattr 265 -#define __NR_tkill 266 -#define __NR_sendfile64 267 -#define __NR_futex 268 -#define __NR_sched_setaffinity 269 -#define __NR_sched_getaffinity 270 -#define __NR_set_thread_area 271 -#define __NR_get_thread_area 272 -#define __NR_io_setup 273 -#define __NR_io_destroy 274 -#define __NR_io_getevents 275 -#define __NR_io_submit 276 -#define __NR_io_cancel 277 -#define __NR_fadvise64 278 -#define __NR_exit_group 280 - -#define __NR_lookup_dcookie 281 -#define __NR_epoll_create 282 -#define __NR_epoll_ctl 283 -#define __NR_epoll_wait 284 -#define __NR_remap_file_pages 285 -#define __NR_set_tid_address 286 -#define __NR_timer_create 287 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 296 -#define __NR_fstatfs64 297 -#define __NR_tgkill 298 -#define __NR_utimes 299 -#define __NR_fadvise64_64 300 -#define __NR_vserver 301 -#define __NR_mbind 302 -#define __NR_get_mempolicy 303 -#define __NR_set_mempolicy 304 -#define __NR_mq_open 305 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 311 -#define __NR_waitid 312 -#define __NR_add_key 313 -#define __NR_request_key 314 -#define __NR_keyctl 315 -#define __NR_ioprio_set 316 -#define __NR_ioprio_get 317 -#define __NR_inotify_init 318 -#define __NR_inotify_add_watch 319 -#define __NR_inotify_rm_watch 320 -/* 321 is unused */ -#define __NR_migrate_pages 322 -#define __NR_openat 323 -#define __NR_mkdirat 324 -#define __NR_mknodat 325 -#define __NR_fchownat 326 -#define __NR_futimesat 327 -#define __NR_fstatat64 328 -#define __NR_unlinkat 329 -#define __NR_renameat 330 -#define __NR_linkat 331 -#define __NR_symlinkat 332 -#define __NR_readlinkat 333 -#define __NR_fchmodat 334 -#define __NR_faccessat 335 -#define __NR_pselect6 336 -#define __NR_ppoll 337 -#define __NR_unshare 338 -#define __NR_set_robust_list 339 -#define __NR_get_robust_list 340 -#define __NR_splice 341 -#define __NR_sync_file_range 342 -#define __NR_tee 343 -#define __NR_vmsplice 344 -#define __NR_move_pages 345 -#define __NR_getcpu 346 -#define __NR_epoll_pwait 347 -#define __NR_utimensat 348 -#define __NR_signalfd 349 -#define __NR_timerfd 350 -#define __NR_eventfd 351 -#define __NR_fallocate 352 - -#ifdef __KERNEL__ - -#define NR_syscalls 353 - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#ifndef cond_syscall -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH64_UNISTD_H */ -- cgit v1.2.3-70-g09d2 From 343ac72248d360f1fae72176aca1117be19189ec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 11 Nov 2007 18:11:18 +0900 Subject: sh: Move over the SH-5 entry.S. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/Makefile | 6 + arch/sh/kernel/cpu/sh5/Makefile | 1 + arch/sh/kernel/cpu/sh5/entry.S | 2100 ++++++++++++++++++++++++++++++++++++++ arch/sh64/kernel/entry.S | 2102 --------------------------------------- include/asm-sh/processor.h | 17 +- 5 files changed, 2119 insertions(+), 2107 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh5/Makefile create mode 100644 arch/sh/kernel/cpu/sh5/entry.S delete mode 100644 arch/sh64/kernel/entry.S (limited to 'include') diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index d055a3ea6b4..f471d242774 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -6,8 +6,14 @@ obj-$(CONFIG_CPU_SH2) = sh2/ obj-$(CONFIG_CPU_SH2A) = sh2a/ obj-$(CONFIG_CPU_SH3) = sh3/ obj-$(CONFIG_CPU_SH4) = sh4/ +obj-$(CONFIG_CPU_SH5) = sh5/ + +# Special cases for family ancestry. + obj-$(CONFIG_CPU_SH4A) += sh4a/ +# Common interfaces. + obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile new file mode 100644 index 00000000000..9778f9bdff3 --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/Makefile @@ -0,0 +1 @@ +obj-y := entry.o diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S new file mode 100644 index 00000000000..2f505a7cb5f --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -0,0 +1,2100 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * arch/sh64/kernel/entry.S + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2004, 2005 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + */ +#include +#include +#include +#include +#include +#include +#include + +/* + * SR fields. + */ +#define SR_ASID_MASK 0x00ff0000 +#define SR_FD_MASK 0x00008000 +#define SR_SS 0x08000000 +#define SR_BL 0x10000000 +#define SR_MD 0x40000000 + +/* + * Event code. + */ +#define EVENT_INTERRUPT 0 +#define EVENT_FAULT_TLB 1 +#define EVENT_FAULT_NOT_TLB 2 +#define EVENT_DEBUG 3 + +/* EXPEVT values */ +#define RESET_CAUSE 0x20 +#define DEBUGSS_CAUSE 0x980 + +/* + * Frame layout. Quad index. + */ +#define FRAME_T(x) FRAME_TBASE+(x*8) +#define FRAME_R(x) FRAME_RBASE+(x*8) +#define FRAME_S(x) FRAME_SBASE+(x*8) +#define FSPC 0 +#define FSSR 1 +#define FSYSCALL_ID 2 + +/* Arrange the save frame to be a multiple of 32 bytes long */ +#define FRAME_SBASE 0 +#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */ +#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */ +#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */ +#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */ + +#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */ +#define FP_FRAME_BASE 0 + +#define SAVED_R2 0*8 +#define SAVED_R3 1*8 +#define SAVED_R4 2*8 +#define SAVED_R5 3*8 +#define SAVED_R18 4*8 +#define SAVED_R6 5*8 +#define SAVED_TR0 6*8 + +/* These are the registers saved in the TLB path that aren't saved in the first + level of the normal one. */ +#define TLB_SAVED_R25 7*8 +#define TLB_SAVED_TR1 8*8 +#define TLB_SAVED_TR2 9*8 +#define TLB_SAVED_TR3 10*8 +#define TLB_SAVED_TR4 11*8 +/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing + breakage otherwise. */ +#define TLB_SAVED_R0 12*8 +#define TLB_SAVED_R1 13*8 + +#define CLI() \ + getcon SR, r6; \ + ori r6, 0xf0, r6; \ + putcon r6, SR; + +#define STI() \ + getcon SR, r6; \ + andi r6, ~0xf0, r6; \ + putcon r6, SR; + +#ifdef CONFIG_PREEMPT +# define preempt_stop() CLI() +#else +# define preempt_stop() +# define resume_kernel restore_all +#endif + + .section .data, "aw" + +#define FAST_TLBMISS_STACK_CACHELINES 4 +#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES) + +/* Register back-up area for all exceptions */ + .balign 32 + /* Allow for 16 quadwords to be pushed by fast tlbmiss handling + * register saves etc. */ + .fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0 +/* This is 32 byte aligned by construction */ +/* Register back-up area for all exceptions */ +reg_save_area: + .quad 0 + .quad 0 + .quad 0 + .quad 0 + + .quad 0 + .quad 0 + .quad 0 + .quad 0 + + .quad 0 + .quad 0 + .quad 0 + .quad 0 + + .quad 0 + .quad 0 + +/* Save area for RESVEC exceptions. We cannot use reg_save_area because of + * reentrancy. Note this area may be accessed via physical address. + * Align so this fits a whole single cache line, for ease of purging. + */ + .balign 32,0,32 +resvec_save_area: + .quad 0 + .quad 0 + .quad 0 + .quad 0 + .quad 0 + .balign 32,0,32 + +/* Jump table of 3rd level handlers */ +trap_jtable: + .long do_exception_error /* 0x000 */ + .long do_exception_error /* 0x020 */ + .long tlb_miss_load /* 0x040 */ + .long tlb_miss_store /* 0x060 */ + ! ARTIFICIAL pseudo-EXPEVT setting + .long do_debug_interrupt /* 0x080 */ + .long tlb_miss_load /* 0x0A0 */ + .long tlb_miss_store /* 0x0C0 */ + .long do_address_error_load /* 0x0E0 */ + .long do_address_error_store /* 0x100 */ +#ifdef CONFIG_SH_FPU + .long do_fpu_error /* 0x120 */ +#else + .long do_exception_error /* 0x120 */ +#endif + .long do_exception_error /* 0x140 */ + .long system_call /* 0x160 */ + .long do_reserved_inst /* 0x180 */ + .long do_illegal_slot_inst /* 0x1A0 */ + .long do_NMI /* 0x1C0 */ + .long do_exception_error /* 0x1E0 */ + .rept 15 + .long do_IRQ /* 0x200 - 0x3C0 */ + .endr + .long do_exception_error /* 0x3E0 */ + .rept 32 + .long do_IRQ /* 0x400 - 0x7E0 */ + .endr + .long fpu_error_or_IRQA /* 0x800 */ + .long fpu_error_or_IRQB /* 0x820 */ + .long do_IRQ /* 0x840 */ + .long do_IRQ /* 0x860 */ + .rept 6 + .long do_exception_error /* 0x880 - 0x920 */ + .endr + .long do_software_break_point /* 0x940 */ + .long do_exception_error /* 0x960 */ + .long do_single_step /* 0x980 */ + + .rept 3 + .long do_exception_error /* 0x9A0 - 0x9E0 */ + .endr + .long do_IRQ /* 0xA00 */ + .long do_IRQ /* 0xA20 */ + .long itlb_miss_or_IRQ /* 0xA40 */ + .long do_IRQ /* 0xA60 */ + .long do_IRQ /* 0xA80 */ + .long itlb_miss_or_IRQ /* 0xAA0 */ + .long do_exception_error /* 0xAC0 */ + .long do_address_error_exec /* 0xAE0 */ + .rept 8 + .long do_exception_error /* 0xB00 - 0xBE0 */ + .endr + .rept 18 + .long do_IRQ /* 0xC00 - 0xE20 */ + .endr + + .section .text64, "ax" + +/* + * --- Exception/Interrupt/Event Handling Section + */ + +/* + * VBR and RESVEC blocks. + * + * First level handler for VBR-based exceptions. + * + * To avoid waste of space, align to the maximum text block size. + * This is assumed to be at most 128 bytes or 32 instructions. + * DO NOT EXCEED 32 instructions on the first level handlers ! + * + * Also note that RESVEC is contained within the VBR block + * where the room left (1KB - TEXT_SIZE) allows placing + * the RESVEC block (at most 512B + TEXT_SIZE). + * + * So first (and only) level handler for RESVEC-based exceptions. + * + * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss + * and interrupt) we are a lot tight with register space until + * saving onto the stack frame, which is done in handle_exception(). + * + */ + +#define TEXT_SIZE 128 +#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */ + + .balign TEXT_SIZE +LVBR_block: + .space 256, 0 /* Power-on class handler, */ + /* not required here */ +not_a_tlb_miss: + synco /* TAKum03020 (but probably a good idea anyway.) */ + /* Save original stack pointer into KCR1 */ + putcon SP, KCR1 + + /* Save other original registers into reg_save_area */ + movi reg_save_area, SP + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* Set args for Non-debug, Not a TLB miss class handler */ + getcon EXPEVT, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_FAULT_NOT_TLB, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + + .balign 256 + ! VBR+0x200 + nop + .balign 256 + ! VBR+0x300 + nop + .balign 256 + /* + * Instead of the natural .balign 1024 place RESVEC here + * respecting the final 1KB alignment. + */ + .balign TEXT_SIZE + /* + * Instead of '.space 1024-TEXT_SIZE' place the RESVEC + * block making sure the final alignment is correct. + */ +tlb_miss: + synco /* TAKum03020 (but probably a good idea anyway.) */ + putcon SP, KCR1 + movi reg_save_area, SP + /* SP is guaranteed 32-byte aligned. */ + st.q SP, TLB_SAVED_R0 , r0 + st.q SP, TLB_SAVED_R1 , r1 + st.q SP, SAVED_R2 , r2 + st.q SP, SAVED_R3 , r3 + st.q SP, SAVED_R4 , r4 + st.q SP, SAVED_R5 , r5 + st.q SP, SAVED_R6 , r6 + st.q SP, SAVED_R18, r18 + + /* Save R25 for safety; as/ld may want to use it to achieve the call to + * the code in mm/tlbmiss.c */ + st.q SP, TLB_SAVED_R25, r25 + gettr tr0, r2 + gettr tr1, r3 + gettr tr2, r4 + gettr tr3, r5 + gettr tr4, r18 + st.q SP, SAVED_TR0 , r2 + st.q SP, TLB_SAVED_TR1 , r3 + st.q SP, TLB_SAVED_TR2 , r4 + st.q SP, TLB_SAVED_TR3 , r5 + st.q SP, TLB_SAVED_TR4 , r18 + + pt do_fast_page_fault, tr0 + getcon SSR, r2 + getcon EXPEVT, r3 + getcon TEA, r4 + shlri r2, 30, r2 + andi r2, 1, r2 /* r2 = SSR.MD */ + blink tr0, LINK + + pt fixup_to_invoke_general_handler, tr1 + + /* If the fast path handler fixed the fault, just drop through quickly + to the restore code right away to return to the excepting context. + */ + beqi/u r2, 0, tr1 + +fast_tlb_miss_restore: + ld.q SP, SAVED_TR0, r2 + ld.q SP, TLB_SAVED_TR1, r3 + ld.q SP, TLB_SAVED_TR2, r4 + + ld.q SP, TLB_SAVED_TR3, r5 + ld.q SP, TLB_SAVED_TR4, r18 + + ptabs r2, tr0 + ptabs r3, tr1 + ptabs r4, tr2 + ptabs r5, tr3 + ptabs r18, tr4 + + ld.q SP, TLB_SAVED_R0, r0 + ld.q SP, TLB_SAVED_R1, r1 + ld.q SP, SAVED_R2, r2 + ld.q SP, SAVED_R3, r3 + ld.q SP, SAVED_R4, r4 + ld.q SP, SAVED_R5, r5 + ld.q SP, SAVED_R6, r6 + ld.q SP, SAVED_R18, r18 + ld.q SP, TLB_SAVED_R25, r25 + + getcon KCR1, SP + rte + nop /* for safety, in case the code is run on sh5-101 cut1.x */ + +fixup_to_invoke_general_handler: + + /* OK, new method. Restore stuff that's not expected to get saved into + the 'first-level' reg save area, then just fall through to setting + up the registers and calling the second-level handler. */ + + /* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore + r25,tr1-4 and save r6 to get into the right state. */ + + ld.q SP, TLB_SAVED_TR1, r3 + ld.q SP, TLB_SAVED_TR2, r4 + ld.q SP, TLB_SAVED_TR3, r5 + ld.q SP, TLB_SAVED_TR4, r18 + ld.q SP, TLB_SAVED_R25, r25 + + ld.q SP, TLB_SAVED_R0, r0 + ld.q SP, TLB_SAVED_R1, r1 + + ptabs/u r3, tr1 + ptabs/u r4, tr2 + ptabs/u r5, tr3 + ptabs/u r18, tr4 + + /* Set args for Non-debug, TLB miss class handler */ + getcon EXPEVT, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_FAULT_TLB, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + +/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE + DOES END UP AT VBR+0x600 */ + nop + nop + nop + nop + nop + nop + + .balign 256 + /* VBR + 0x600 */ + +interrupt: + synco /* TAKum03020 (but probably a good idea anyway.) */ + /* Save original stack pointer into KCR1 */ + putcon SP, KCR1 + + /* Save other original registers into reg_save_area */ + movi reg_save_area, SP + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* Set args for interrupt class handler */ + getcon INTEVT, r2 + movi ret_from_irq, r3 + ori r3, 1, r3 + movi EVENT_INTERRUPT, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + .balign TEXT_SIZE /* let's waste the bare minimum */ + +LVBR_block_end: /* Marker. Used for total checking */ + + .balign 256 +LRESVEC_block: + /* Panic handler. Called with MMU off. Possible causes/actions: + * - Reset: Jump to program start. + * - Single Step: Turn off Single Step & return. + * - Others: Call panic handler, passing PC as arg. + * (this may need to be extended...) + */ +reset_or_panic: + synco /* TAKum03020 (but probably a good idea anyway.) */ + putcon SP, DCR + /* First save r0-1 and tr0, as we need to use these */ + movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP + st.q SP, 0, r0 + st.q SP, 8, r1 + gettr tr0, r0 + st.q SP, 32, r0 + + /* Check cause */ + getcon EXPEVT, r0 + movi RESET_CAUSE, r1 + sub r1, r0, r1 /* r1=0 if reset */ + movi _stext-CONFIG_CACHED_MEMORY_OFFSET, r0 + ori r0, 1, r0 + ptabs r0, tr0 + beqi r1, 0, tr0 /* Jump to start address if reset */ + + getcon EXPEVT, r0 + movi DEBUGSS_CAUSE, r1 + sub r1, r0, r1 /* r1=0 if single step */ + pta single_step_panic, tr0 + beqi r1, 0, tr0 /* jump if single step */ + + /* Now jump to where we save the registers. */ + movi panic_stash_regs-CONFIG_CACHED_MEMORY_OFFSET, r1 + ptabs r1, tr0 + blink tr0, r63 + +single_step_panic: + /* We are in a handler with Single Step set. We need to resume the + * handler, by turning on MMU & turning off Single Step. */ + getcon SSR, r0 + movi SR_MMU, r1 + or r0, r1, r0 + movi ~SR_SS, r1 + and r0, r1, r0 + putcon r0, SSR + /* Restore EXPEVT, as the rte won't do this */ + getcon PEXPEVT, r0 + putcon r0, EXPEVT + /* Restore regs */ + ld.q SP, 32, r0 + ptabs r0, tr0 + ld.q SP, 0, r0 + ld.q SP, 8, r1 + getcon DCR, SP + synco + rte + + + .balign 256 +debug_exception: + synco /* TAKum03020 (but probably a good idea anyway.) */ + /* + * Single step/software_break_point first level handler. + * Called with MMU off, so the first thing we do is enable it + * by doing an rte with appropriate SSR. + */ + putcon SP, DCR + /* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */ + movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP + + /* With the MMU off, we are bypassing the cache, so purge any + * data that will be made stale by the following stores. + */ + ocbp SP, 0 + synco + + st.q SP, 0, r0 + st.q SP, 8, r1 + getcon SPC, r0 + st.q SP, 16, r0 + getcon SSR, r0 + st.q SP, 24, r0 + + /* Enable MMU, block exceptions, set priv mode, disable single step */ + movi SR_MMU | SR_BL | SR_MD, r1 + or r0, r1, r0 + movi ~SR_SS, r1 + and r0, r1, r0 + putcon r0, SSR + /* Force control to debug_exception_2 when rte is executed */ + movi debug_exeception_2, r0 + ori r0, 1, r0 /* force SHmedia, just in case */ + putcon r0, SPC + getcon DCR, SP + synco + rte +debug_exeception_2: + /* Restore saved regs */ + putcon SP, KCR1 + movi resvec_save_area, SP + ld.q SP, 24, r0 + putcon r0, SSR + ld.q SP, 16, r0 + putcon r0, SPC + ld.q SP, 0, r0 + ld.q SP, 8, r1 + + /* Save other original registers into reg_save_area */ + movi reg_save_area, SP + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* Set args for debug class handler */ + getcon EXPEVT, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_DEBUG, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + + .balign 256 +debug_interrupt: + /* !!! WE COME HERE IN REAL MODE !!! */ + /* Hook-up debug interrupt to allow various debugging options to be + * hooked into its handler. */ + /* Save original stack pointer into KCR1 */ + synco + putcon SP, KCR1 + movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP + ocbp SP, 0 + ocbp SP, 32 + synco + + /* Save other original registers into reg_save_area thru real addresses */ + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* move (spc,ssr)->(pspc,pssr). The rte will shift + them back again, so that they look like the originals + as far as the real handler code is concerned. */ + getcon spc, r6 + putcon r6, pspc + getcon ssr, r6 + putcon r6, pssr + + ! construct useful SR for handle_exception + movi 3, r6 + shlli r6, 30, r6 + getcon sr, r18 + or r18, r6, r6 + putcon r6, ssr + + ! SSR is now the current SR with the MD and MMU bits set + ! i.e. the rte will switch back to priv mode and put + ! the mmu back on + + ! construct spc + movi handle_exception, r18 + ori r18, 1, r18 ! for safety (do we need this?) + putcon r18, spc + + /* Set args for Non-debug, Not a TLB miss class handler */ + + ! EXPEVT==0x80 is unused, so 'steal' this value to put the + ! debug interrupt handler in the vectoring table + movi 0x80, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_FAULT_NOT_TLB, r4 + + or SP, ZERO, r5 + movi CONFIG_CACHED_MEMORY_OFFSET, r6 + add r6, r5, r5 + getcon KCR1, SP + + synco ! for safety + rte ! -> handle_exception, switch back to priv mode again + +LRESVEC_block_end: /* Marker. Unused. */ + + .balign TEXT_SIZE + +/* + * Second level handler for VBR-based exceptions. Pre-handler. + * In common to all stack-frame sensitive handlers. + * + * Inputs: + * (KCR0) Current [current task union] + * (KCR1) Original SP + * (r2) INTEVT/EXPEVT + * (r3) appropriate return address + * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug) + * (r5) Pointer to reg_save_area + * (SP) Original SP + * + * Available registers: + * (r6) + * (r18) + * (tr0) + * + */ +handle_exception: + /* Common 2nd level handler. */ + + /* First thing we need an appropriate stack pointer */ + getcon SSR, r6 + shlri r6, 30, r6 + andi r6, 1, r6 + pta stack_ok, tr0 + bne r6, ZERO, tr0 /* Original stack pointer is fine */ + + /* Set stack pointer for user fault */ + getcon KCR0, SP + movi THREAD_SIZE, r6 /* Point to the end */ + add SP, r6, SP + +stack_ok: + +/* DEBUG : check for underflow/overflow of the kernel stack */ + pta no_underflow, tr0 + getcon KCR0, r6 + movi 1024, r18 + add r6, r18, r6 + bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone + +/* Just panic to cause a crash. */ +bad_sp: + ld.b r63, 0, r6 + nop + +no_underflow: + pta bad_sp, tr0 + getcon kcr0, r6 + movi THREAD_SIZE, r18 + add r18, r6, r6 + bgt SP, r6, tr0 ! sp above the stack + + /* Make some room for the BASIC frame. */ + movi -(FRAME_SIZE), r6 + add SP, r6, SP + +/* Could do this with no stalling if we had another spare register, but the + code below will be OK. */ + ld.q r5, SAVED_R2, r6 + ld.q r5, SAVED_R3, r18 + st.q SP, FRAME_R(2), r6 + ld.q r5, SAVED_R4, r6 + st.q SP, FRAME_R(3), r18 + ld.q r5, SAVED_R5, r18 + st.q SP, FRAME_R(4), r6 + ld.q r5, SAVED_R6, r6 + st.q SP, FRAME_R(5), r18 + ld.q r5, SAVED_R18, r18 + st.q SP, FRAME_R(6), r6 + ld.q r5, SAVED_TR0, r6 + st.q SP, FRAME_R(18), r18 + st.q SP, FRAME_T(0), r6 + + /* Keep old SP around */ + getcon KCR1, r6 + + /* Save the rest of the general purpose registers */ + st.q SP, FRAME_R(0), r0 + st.q SP, FRAME_R(1), r1 + st.q SP, FRAME_R(7), r7 + st.q SP, FRAME_R(8), r8 + st.q SP, FRAME_R(9), r9 + st.q SP, FRAME_R(10), r10 + st.q SP, FRAME_R(11), r11 + st.q SP, FRAME_R(12), r12 + st.q SP, FRAME_R(13), r13 + st.q SP, FRAME_R(14), r14 + + /* SP is somewhere else */ + st.q SP, FRAME_R(15), r6 + + st.q SP, FRAME_R(16), r16 + st.q SP, FRAME_R(17), r17 + /* r18 is saved earlier. */ + st.q SP, FRAME_R(19), r19 + st.q SP, FRAME_R(20), r20 + st.q SP, FRAME_R(21), r21 + st.q SP, FRAME_R(22), r22 + st.q SP, FRAME_R(23), r23 + st.q SP, FRAME_R(24), r24 + st.q SP, FRAME_R(25), r25 + st.q SP, FRAME_R(26), r26 + st.q SP, FRAME_R(27), r27 + st.q SP, FRAME_R(28), r28 + st.q SP, FRAME_R(29), r29 + st.q SP, FRAME_R(30), r30 + st.q SP, FRAME_R(31), r31 + st.q SP, FRAME_R(32), r32 + st.q SP, FRAME_R(33), r33 + st.q SP, FRAME_R(34), r34 + st.q SP, FRAME_R(35), r35 + st.q SP, FRAME_R(36), r36 + st.q SP, FRAME_R(37), r37 + st.q SP, FRAME_R(38), r38 + st.q SP, FRAME_R(39), r39 + st.q SP, FRAME_R(40), r40 + st.q SP, FRAME_R(41), r41 + st.q SP, FRAME_R(42), r42 + st.q SP, FRAME_R(43), r43 + st.q SP, FRAME_R(44), r44 + st.q SP, FRAME_R(45), r45 + st.q SP, FRAME_R(46), r46 + st.q SP, FRAME_R(47), r47 + st.q SP, FRAME_R(48), r48 + st.q SP, FRAME_R(49), r49 + st.q SP, FRAME_R(50), r50 + st.q SP, FRAME_R(51), r51 + st.q SP, FRAME_R(52), r52 + st.q SP, FRAME_R(53), r53 + st.q SP, FRAME_R(54), r54 + st.q SP, FRAME_R(55), r55 + st.q SP, FRAME_R(56), r56 + st.q SP, FRAME_R(57), r57 + st.q SP, FRAME_R(58), r58 + st.q SP, FRAME_R(59), r59 + st.q SP, FRAME_R(60), r60 + st.q SP, FRAME_R(61), r61 + st.q SP, FRAME_R(62), r62 + + /* + * Save the S* registers. + */ + getcon SSR, r61 + st.q SP, FRAME_S(FSSR), r61 + getcon SPC, r62 + st.q SP, FRAME_S(FSPC), r62 + movi -1, r62 /* Reset syscall_nr */ + st.q SP, FRAME_S(FSYSCALL_ID), r62 + + /* Save the rest of the target registers */ + gettr tr1, r6 + st.q SP, FRAME_T(1), r6 + gettr tr2, r6 + st.q SP, FRAME_T(2), r6 + gettr tr3, r6 + st.q SP, FRAME_T(3), r6 + gettr tr4, r6 + st.q SP, FRAME_T(4), r6 + gettr tr5, r6 + st.q SP, FRAME_T(5), r6 + gettr tr6, r6 + st.q SP, FRAME_T(6), r6 + gettr tr7, r6 + st.q SP, FRAME_T(7), r6 + + ! setup FP so that unwinder can wind back through nested kernel mode + ! exceptions + add SP, ZERO, r14 + +#ifdef CONFIG_POOR_MANS_STRACE + /* We've pushed all the registers now, so only r2-r4 hold anything + * useful. Move them into callee save registers */ + or r2, ZERO, r28 + or r3, ZERO, r29 + or r4, ZERO, r30 + + /* Preserve r2 as the event code */ + movi evt_debug, r3 + ori r3, 1, r3 + ptabs r3, tr0 + + or SP, ZERO, r6 + getcon TRA, r5 + blink tr0, LINK + + or r28, ZERO, r2 + or r29, ZERO, r3 + or r30, ZERO, r4 +#endif + + /* For syscall and debug race condition, get TRA now */ + getcon TRA, r5 + + /* We are in a safe position to turn SR.BL off, but set IMASK=0xf + * Also set FD, to catch FPU usage in the kernel. + * + * benedict.gaster@superh.com 29/07/2002 + * + * On all SH5-101 revisions it is unsafe to raise the IMASK and at the + * same time change BL from 1->0, as any pending interrupt of a level + * higher than he previous value of IMASK will leak through and be + * taken unexpectedly. + * + * To avoid this we raise the IMASK and then issue another PUTCON to + * enable interrupts. + */ + getcon SR, r6 + movi SR_IMASK | SR_FD, r7 + or r6, r7, r6 + putcon r6, SR + movi SR_UNBLOCK_EXC, r7 + and r6, r7, r6 + putcon r6, SR + + + /* Now call the appropriate 3rd level handler */ + or r3, ZERO, LINK + movi trap_jtable, r3 + shlri r2, 3, r2 + ldx.l r2, r3, r3 + shlri r2, 2, r2 + ptabs r3, tr0 + or SP, ZERO, r3 + blink tr0, ZERO + +/* + * Second level handler for VBR-based exceptions. Post-handlers. + * + * Post-handlers for interrupts (ret_from_irq), exceptions + * (ret_from_exception) and common reentrance doors (restore_all + * to get back to the original context, ret_from_syscall loop to + * check kernel exiting). + * + * ret_with_reschedule and work_notifysig are an inner lables of + * the ret_from_syscall loop. + * + * In common to all stack-frame sensitive handlers. + * + * Inputs: + * (SP) struct pt_regs *, original register's frame pointer (basic) + * + */ + .global ret_from_irq +ret_from_irq: +#ifdef CONFIG_POOR_MANS_STRACE + pta evt_debug_ret_from_irq, tr0 + ori SP, 0, r2 + blink tr0, LINK +#endif + ld.q SP, FRAME_S(FSSR), r6 + shlri r6, 30, r6 + andi r6, 1, r6 + pta resume_kernel, tr0 + bne r6, ZERO, tr0 /* no further checks */ + STI() + pta ret_with_reschedule, tr0 + blink tr0, ZERO /* Do not check softirqs */ + + .global ret_from_exception +ret_from_exception: + preempt_stop() + +#ifdef CONFIG_POOR_MANS_STRACE + pta evt_debug_ret_from_exc, tr0 + ori SP, 0, r2 + blink tr0, LINK +#endif + + ld.q SP, FRAME_S(FSSR), r6 + shlri r6, 30, r6 + andi r6, 1, r6 + pta resume_kernel, tr0 + bne r6, ZERO, tr0 /* no further checks */ + + /* Check softirqs */ + +#ifdef CONFIG_PREEMPT + pta ret_from_syscall, tr0 + blink tr0, ZERO + +resume_kernel: + pta restore_all, tr0 + + getcon KCR0, r6 + ld.l r6, TI_PRE_COUNT, r7 + beq/u r7, ZERO, tr0 + +need_resched: + ld.l r6, TI_FLAGS, r7 + movi (1 << TIF_NEED_RESCHED), r8 + and r8, r7, r8 + bne r8, ZERO, tr0 + + getcon SR, r7 + andi r7, 0xf0, r7 + bne r7, ZERO, tr0 + + movi ((PREEMPT_ACTIVE >> 16) & 65535), r8 + shori (PREEMPT_ACTIVE & 65535), r8 + st.l r6, TI_PRE_COUNT, r8 + + STI() + movi schedule, r7 + ori r7, 1, r7 + ptabs r7, tr1 + blink tr1, LINK + + st.l r6, TI_PRE_COUNT, ZERO + CLI() + + pta need_resched, tr1 + blink tr1, ZERO +#endif + + .global ret_from_syscall +ret_from_syscall: + +ret_with_reschedule: + getcon KCR0, r6 ! r6 contains current_thread_info + ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags + + ! FIXME:!!! + ! no handling of TIF_SYSCALL_TRACE yet!! + + movi _TIF_NEED_RESCHED, r8 + and r8, r7, r8 + pta work_resched, tr0 + bne r8, ZERO, tr0 + + pta restore_all, tr1 + + movi (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8 + and r8, r7, r8 + pta work_notifysig, tr0 + bne r8, ZERO, tr0 + + blink tr1, ZERO + +work_resched: + pta ret_from_syscall, tr0 + gettr tr0, LINK + movi schedule, r6 + ptabs r6, tr0 + blink tr0, ZERO /* Call schedule(), return on top */ + +work_notifysig: + gettr tr1, LINK + + movi do_signal, r6 + ptabs r6, tr0 + or SP, ZERO, r2 + or ZERO, ZERO, r3 + blink tr0, LINK /* Call do_signal(regs, 0), return here */ + +restore_all: + /* Do prefetches */ + + ld.q SP, FRAME_T(0), r6 + ld.q SP, FRAME_T(1), r7 + ld.q SP, FRAME_T(2), r8 + ld.q SP, FRAME_T(3), r9 + ptabs r6, tr0 + ptabs r7, tr1 + ptabs r8, tr2 + ptabs r9, tr3 + ld.q SP, FRAME_T(4), r6 + ld.q SP, FRAME_T(5), r7 + ld.q SP, FRAME_T(6), r8 + ld.q SP, FRAME_T(7), r9 + ptabs r6, tr4 + ptabs r7, tr5 + ptabs r8, tr6 + ptabs r9, tr7 + + ld.q SP, FRAME_R(0), r0 + ld.q SP, FRAME_R(1), r1 + ld.q SP, FRAME_R(2), r2 + ld.q SP, FRAME_R(3), r3 + ld.q SP, FRAME_R(4), r4 + ld.q SP, FRAME_R(5), r5 + ld.q SP, FRAME_R(6), r6 + ld.q SP, FRAME_R(7), r7 + ld.q SP, FRAME_R(8), r8 + ld.q SP, FRAME_R(9), r9 + ld.q SP, FRAME_R(10), r10 + ld.q SP, FRAME_R(11), r11 + ld.q SP, FRAME_R(12), r12 + ld.q SP, FRAME_R(13), r13 + ld.q SP, FRAME_R(14), r14 + + ld.q SP, FRAME_R(16), r16 + ld.q SP, FRAME_R(17), r17 + ld.q SP, FRAME_R(18), r18 + ld.q SP, FRAME_R(19), r19 + ld.q SP, FRAME_R(20), r20 + ld.q SP, FRAME_R(21), r21 + ld.q SP, FRAME_R(22), r22 + ld.q SP, FRAME_R(23), r23 + ld.q SP, FRAME_R(24), r24 + ld.q SP, FRAME_R(25), r25 + ld.q SP, FRAME_R(26), r26 + ld.q SP, FRAME_R(27), r27 + ld.q SP, FRAME_R(28), r28 + ld.q SP, FRAME_R(29), r29 + ld.q SP, FRAME_R(30), r30 + ld.q SP, FRAME_R(31), r31 + ld.q SP, FRAME_R(32), r32 + ld.q SP, FRAME_R(33), r33 + ld.q SP, FRAME_R(34), r34 + ld.q SP, FRAME_R(35), r35 + ld.q SP, FRAME_R(36), r36 + ld.q SP, FRAME_R(37), r37 + ld.q SP, FRAME_R(38), r38 + ld.q SP, FRAME_R(39), r39 + ld.q SP, FRAME_R(40), r40 + ld.q SP, FRAME_R(41), r41 + ld.q SP, FRAME_R(42), r42 + ld.q SP, FRAME_R(43), r43 + ld.q SP, FRAME_R(44), r44 + ld.q SP, FRAME_R(45), r45 + ld.q SP, FRAME_R(46), r46 + ld.q SP, FRAME_R(47), r47 + ld.q SP, FRAME_R(48), r48 + ld.q SP, FRAME_R(49), r49 + ld.q SP, FRAME_R(50), r50 + ld.q SP, FRAME_R(51), r51 + ld.q SP, FRAME_R(52), r52 + ld.q SP, FRAME_R(53), r53 + ld.q SP, FRAME_R(54), r54 + ld.q SP, FRAME_R(55), r55 + ld.q SP, FRAME_R(56), r56 + ld.q SP, FRAME_R(57), r57 + ld.q SP, FRAME_R(58), r58 + + getcon SR, r59 + movi SR_BLOCK_EXC, r60 + or r59, r60, r59 + putcon r59, SR /* SR.BL = 1, keep nesting out */ + ld.q SP, FRAME_S(FSSR), r61 + ld.q SP, FRAME_S(FSPC), r62 + movi SR_ASID_MASK, r60 + and r59, r60, r59 + andc r61, r60, r61 /* Clear out older ASID */ + or r59, r61, r61 /* Retain current ASID */ + putcon r61, SSR + putcon r62, SPC + + /* Ignore FSYSCALL_ID */ + + ld.q SP, FRAME_R(59), r59 + ld.q SP, FRAME_R(60), r60 + ld.q SP, FRAME_R(61), r61 + ld.q SP, FRAME_R(62), r62 + + /* Last touch */ + ld.q SP, FRAME_R(15), SP + rte + nop + +/* + * Third level handlers for VBR-based exceptions. Adapting args to + * and/or deflecting to fourth level handlers. + * + * Fourth level handlers interface. + * Most are C-coded handlers directly pointed by the trap_jtable. + * (Third = Fourth level) + * Inputs: + * (r2) fault/interrupt code, entry number (e.g. NMI = 14, + * IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...) + * (r3) struct pt_regs *, original register's frame pointer + * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault) + * (r5) TRA control register (for syscall/debug benefit only) + * (LINK) return address + * (SP) = r3 + * + * Kernel TLB fault handlers will get a slightly different interface. + * (r2) struct pt_regs *, original register's frame pointer + * (r3) writeaccess, whether it's a store fault as opposed to load fault + * (r4) execaccess, whether it's a ITLB fault as opposed to DTLB fault + * (r5) Effective Address of fault + * (LINK) return address + * (SP) = r2 + * + * fpu_error_or_IRQ? is a helper to deflect to the right cause. + * + */ +tlb_miss_load: + or SP, ZERO, r2 + or ZERO, ZERO, r3 /* Read */ + or ZERO, ZERO, r4 /* Data */ + getcon TEA, r5 + pta call_do_page_fault, tr0 + beq ZERO, ZERO, tr0 + +tlb_miss_store: + or SP, ZERO, r2 + movi 1, r3 /* Write */ + or ZERO, ZERO, r4 /* Data */ + getcon TEA, r5 + pta call_do_page_fault, tr0 + beq ZERO, ZERO, tr0 + +itlb_miss_or_IRQ: + pta its_IRQ, tr0 + beqi/u r4, EVENT_INTERRUPT, tr0 + or SP, ZERO, r2 + or ZERO, ZERO, r3 /* Read */ + movi 1, r4 /* Text */ + getcon TEA, r5 + /* Fall through */ + +call_do_page_fault: + movi do_page_fault, r6 + ptabs r6, tr0 + blink tr0, ZERO + +fpu_error_or_IRQA: + pta its_IRQ, tr0 + beqi/l r4, EVENT_INTERRUPT, tr0 +#ifdef CONFIG_SH_FPU + movi do_fpu_state_restore, r6 +#else + movi do_exception_error, r6 +#endif + ptabs r6, tr0 + blink tr0, ZERO + +fpu_error_or_IRQB: + pta its_IRQ, tr0 + beqi/l r4, EVENT_INTERRUPT, tr0 +#ifdef CONFIG_SH_FPU + movi do_fpu_state_restore, r6 +#else + movi do_exception_error, r6 +#endif + ptabs r6, tr0 + blink tr0, ZERO + +its_IRQ: + movi do_IRQ, r6 + ptabs r6, tr0 + blink tr0, ZERO + +/* + * system_call/unknown_trap third level handler: + * + * Inputs: + * (r2) fault/interrupt code, entry number (TRAP = 11) + * (r3) struct pt_regs *, original register's frame pointer + * (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault) + * (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr) + * (SP) = r3 + * (LINK) return address: ret_from_exception + * (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7) + * + * Outputs: + * (*r3) Syscall reply (Saved r2) + * (LINK) In case of syscall only it can be scrapped. + * Common second level post handler will be ret_from_syscall. + * Common (non-trace) exit point to that is syscall_ret (saving + * result to r2). Common bad exit point is syscall_bad (returning + * ENOSYS then saved to r2). + * + */ + +unknown_trap: + /* Unknown Trap or User Trace */ + movi do_unknown_trapa, r6 + ptabs r6, tr0 + ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */ + andi r2, 0x1ff, r2 /* r2 = syscall # */ + blink tr0, LINK + + pta syscall_ret, tr0 + blink tr0, ZERO + + /* New syscall implementation*/ +system_call: + pta unknown_trap, tr0 + or r5, ZERO, r4 /* TRA (=r5) -> r4 */ + shlri r4, 20, r4 + bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */ + + /* It's a system call */ + st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */ + andi r5, 0x1ff, r5 /* syscall # -> r5 */ + + STI() + + pta syscall_allowed, tr0 + movi NR_syscalls - 1, r4 /* Last valid */ + bgeu/l r4, r5, tr0 + +syscall_bad: + /* Return ENOSYS ! */ + movi -(ENOSYS), r2 /* Fall-through */ + + .global syscall_ret +syscall_ret: + st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */ + +#ifdef CONFIG_POOR_MANS_STRACE + /* nothing useful in registers at this point */ + + movi evt_debug2, r5 + ori r5, 1, r5 + ptabs r5, tr0 + ld.q SP, FRAME_R(9), r2 + or SP, ZERO, r3 + blink tr0, LINK +#endif + + ld.q SP, FRAME_S(FSPC), r2 + addi r2, 4, r2 /* Move PC, being pre-execution event */ + st.q SP, FRAME_S(FSPC), r2 + pta ret_from_syscall, tr0 + blink tr0, ZERO + + +/* A different return path for ret_from_fork, because we now need + * to call schedule_tail with the later kernels. Because prev is + * loaded into r2 by switch_to() means we can just call it straight away + */ + +.global ret_from_fork +ret_from_fork: + + movi schedule_tail,r5 + ori r5, 1, r5 + ptabs r5, tr0 + blink tr0, LINK + +#ifdef CONFIG_POOR_MANS_STRACE + /* nothing useful in registers at this point */ + + movi evt_debug2, r5 + ori r5, 1, r5 + ptabs r5, tr0 + ld.q SP, FRAME_R(9), r2 + or SP, ZERO, r3 + blink tr0, LINK +#endif + + ld.q SP, FRAME_S(FSPC), r2 + addi r2, 4, r2 /* Move PC, being pre-execution event */ + st.q SP, FRAME_S(FSPC), r2 + pta ret_from_syscall, tr0 + blink tr0, ZERO + + + +syscall_allowed: + /* Use LINK to deflect the exit point, default is syscall_ret */ + pta syscall_ret, tr0 + gettr tr0, LINK + pta syscall_notrace, tr0 + + getcon KCR0, r2 + ld.l r2, TI_FLAGS, r4 + movi (1 << TIF_SYSCALL_TRACE), r6 + and r6, r4, r6 + beq/l r6, ZERO, tr0 + + /* Trace it by calling syscall_trace before and after */ + movi syscall_trace, r4 + ptabs r4, tr0 + blink tr0, LINK + /* Reload syscall number as r5 is trashed by syscall_trace */ + ld.q SP, FRAME_S(FSYSCALL_ID), r5 + andi r5, 0x1ff, r5 + + pta syscall_ret_trace, tr0 + gettr tr0, LINK + +syscall_notrace: + /* Now point to the appropriate 4th level syscall handler */ + movi sys_call_table, r4 + shlli r5, 2, r5 + ldx.l r4, r5, r5 + ptabs r5, tr0 + + /* Prepare original args */ + ld.q SP, FRAME_R(2), r2 + ld.q SP, FRAME_R(3), r3 + ld.q SP, FRAME_R(4), r4 + ld.q SP, FRAME_R(5), r5 + ld.q SP, FRAME_R(6), r6 + ld.q SP, FRAME_R(7), r7 + + /* And now the trick for those syscalls requiring regs * ! */ + or SP, ZERO, r8 + + /* Call it */ + blink tr0, ZERO /* LINK is already properly set */ + +syscall_ret_trace: + /* We get back here only if under trace */ + st.q SP, FRAME_R(9), r2 /* Save return value */ + + movi syscall_trace, LINK + ptabs LINK, tr0 + blink tr0, LINK + + /* This needs to be done after any syscall tracing */ + ld.q SP, FRAME_S(FSPC), r2 + addi r2, 4, r2 /* Move PC, being pre-execution event */ + st.q SP, FRAME_S(FSPC), r2 + + pta ret_from_syscall, tr0 + blink tr0, ZERO /* Resume normal return sequence */ + +/* + * --- Switch to running under a particular ASID and return the previous ASID value + * --- The caller is assumed to have done a cli before calling this. + * + * Input r2 : new ASID + * Output r2 : old ASID + */ + + .global switch_and_save_asid +switch_and_save_asid: + getcon sr, r0 + movi 255, r4 + shlli r4, 16, r4 /* r4 = mask to select ASID */ + and r0, r4, r3 /* r3 = shifted old ASID */ + andi r2, 255, r2 /* mask down new ASID */ + shlli r2, 16, r2 /* align new ASID against SR.ASID */ + andc r0, r4, r0 /* efface old ASID from SR */ + or r0, r2, r0 /* insert the new ASID */ + putcon r0, ssr + movi 1f, r0 + putcon r0, spc + rte + nop +1: + ptabs LINK, tr0 + shlri r3, 16, r2 /* r2 = old ASID */ + blink tr0, r63 + + .global route_to_panic_handler +route_to_panic_handler: + /* Switch to real mode, goto panic_handler, don't return. Useful for + last-chance debugging, e.g. if no output wants to go to the console. + */ + + movi panic_handler - CONFIG_CACHED_MEMORY_OFFSET, r1 + ptabs r1, tr0 + pta 1f, tr1 + gettr tr1, r0 + putcon r0, spc + getcon sr, r0 + movi 1, r1 + shlli r1, 31, r1 + andc r0, r1, r0 + putcon r0, ssr + rte + nop +1: /* Now in real mode */ + blink tr0, r63 + nop + + .global peek_real_address_q +peek_real_address_q: + /* Two args: + r2 : real mode address to peek + r2(out) : result quadword + + This is provided as a cheapskate way of manipulating device + registers for debugging (to avoid the need to onchip_remap the debug + module, and to avoid the need to onchip_remap the watchpoint + controller in a way that identity maps sufficient bits to avoid the + SH5-101 cut2 silicon defect). + + This code is not performance critical + */ + + add.l r2, r63, r2 /* sign extend address */ + getcon sr, r0 /* r0 = saved original SR */ + movi 1, r1 + shlli r1, 28, r1 + or r0, r1, r1 /* r0 with block bit set */ + putcon r1, sr /* now in critical section */ + movi 1, r36 + shlli r36, 31, r36 + andc r1, r36, r1 /* turn sr.mmu off in real mode section */ + + putcon r1, ssr + movi .peek0 - CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */ + movi 1f, r37 /* virtual mode return addr */ + putcon r36, spc + + synco + rte + nop + +.peek0: /* come here in real mode, don't touch caches!! + still in critical section (sr.bl==1) */ + putcon r0, ssr + putcon r37, spc + /* Here's the actual peek. If the address is bad, all bets are now off + * what will happen (handlers invoked in real-mode = bad news) */ + ld.q r2, 0, r2 + synco + rte /* Back to virtual mode */ + nop + +1: + ptabs LINK, tr0 + blink tr0, r63 + + .global poke_real_address_q +poke_real_address_q: + /* Two args: + r2 : real mode address to poke + r3 : quadword value to write. + + This is provided as a cheapskate way of manipulating device + registers for debugging (to avoid the need to onchip_remap the debug + module, and to avoid the need to onchip_remap the watchpoint + controller in a way that identity maps sufficient bits to avoid the + SH5-101 cut2 silicon defect). + + This code is not performance critical + */ + + add.l r2, r63, r2 /* sign extend address */ + getcon sr, r0 /* r0 = saved original SR */ + movi 1, r1 + shlli r1, 28, r1 + or r0, r1, r1 /* r0 with block bit set */ + putcon r1, sr /* now in critical section */ + movi 1, r36 + shlli r36, 31, r36 + andc r1, r36, r1 /* turn sr.mmu off in real mode section */ + + putcon r1, ssr + movi .poke0-CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */ + movi 1f, r37 /* virtual mode return addr */ + putcon r36, spc + + synco + rte + nop + +.poke0: /* come here in real mode, don't touch caches!! + still in critical section (sr.bl==1) */ + putcon r0, ssr + putcon r37, spc + /* Here's the actual poke. If the address is bad, all bets are now off + * what will happen (handlers invoked in real-mode = bad news) */ + st.q r2, 0, r3 + synco + rte /* Back to virtual mode */ + nop + +1: + ptabs LINK, tr0 + blink tr0, r63 + +/* + * --- User Access Handling Section + */ + +/* + * User Access support. It all moved to non inlined Assembler + * functions in here. + * + * __kernel_size_t __copy_user(void *__to, const void *__from, + * __kernel_size_t __n) + * + * Inputs: + * (r2) target address + * (r3) source address + * (r4) size in bytes + * + * Ouputs: + * (*r2) target data + * (r2) non-copied bytes + * + * If a fault occurs on the user pointer, bail out early and return the + * number of bytes not copied in r2. + * Strategy : for large blocks, call a real memcpy function which can + * move >1 byte at a time using unaligned ld/st instructions, and can + * manipulate the cache using prefetch + alloco to improve the speed + * further. If a fault occurs in that function, just revert to the + * byte-by-byte approach used for small blocks; this is rare so the + * performance hit for that case does not matter. + * + * For small blocks it's not worth the overhead of setting up and calling + * the memcpy routine; do the copy a byte at a time. + * + */ + .global __copy_user +__copy_user: + pta __copy_user_byte_by_byte, tr1 + movi 16, r0 ! this value is a best guess, should tune it by benchmarking + bge/u r0, r4, tr1 + pta copy_user_memcpy, tr0 + addi SP, -32, SP + /* Save arguments in case we have to fix-up unhandled page fault */ + st.q SP, 0, r2 + st.q SP, 8, r3 + st.q SP, 16, r4 + st.q SP, 24, r35 ! r35 is callee-save + /* Save LINK in a register to reduce RTS time later (otherwise + ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */ + ori LINK, 0, r35 + blink tr0, LINK + + /* Copy completed normally if we get back here */ + ptabs r35, tr0 + ld.q SP, 24, r35 + /* don't restore r2-r4, pointless */ + /* set result=r2 to zero as the copy must have succeeded. */ + or r63, r63, r2 + addi SP, 32, SP + blink tr0, r63 ! RTS + + .global __copy_user_fixup +__copy_user_fixup: + /* Restore stack frame */ + ori r35, 0, LINK + ld.q SP, 24, r35 + ld.q SP, 16, r4 + ld.q SP, 8, r3 + ld.q SP, 0, r2 + addi SP, 32, SP + /* Fall through to original code, in the 'same' state we entered with */ + +/* The slow byte-by-byte method is used if the fast copy traps due to a bad + user address. In that rare case, the speed drop can be tolerated. */ +__copy_user_byte_by_byte: + pta ___copy_user_exit, tr1 + pta ___copy_user1, tr0 + beq/u r4, r63, tr1 /* early exit for zero length copy */ + sub r2, r3, r0 + addi r0, -1, r0 + +___copy_user1: + ld.b r3, 0, r5 /* Fault address 1 */ + + /* Could rewrite this to use just 1 add, but the second comes 'free' + due to load latency */ + addi r3, 1, r3 + addi r4, -1, r4 /* No real fixup required */ +___copy_user2: + stx.b r3, r0, r5 /* Fault address 2 */ + bne r4, ZERO, tr0 + +___copy_user_exit: + or r4, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * __kernel_size_t __clear_user(void *addr, __kernel_size_t size) + * + * Inputs: + * (r2) target address + * (r3) size in bytes + * + * Ouputs: + * (*r2) zero-ed target data + * (r2) non-zero-ed bytes + */ + .global __clear_user +__clear_user: + pta ___clear_user_exit, tr1 + pta ___clear_user1, tr0 + beq/u r3, r63, tr1 + +___clear_user1: + st.b r2, 0, ZERO /* Fault address */ + addi r2, 1, r2 + addi r3, -1, r3 /* No real fixup required */ + bne r3, ZERO, tr0 + +___clear_user_exit: + or r3, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + + +/* + * int __strncpy_from_user(unsigned long __dest, unsigned long __src, + * int __count) + * + * Inputs: + * (r2) target address + * (r3) source address + * (r4) maximum size in bytes + * + * Ouputs: + * (*r2) copied data + * (r2) -EFAULT (in case of faulting) + * copied data (otherwise) + */ + .global __strncpy_from_user +__strncpy_from_user: + pta ___strncpy_from_user1, tr0 + pta ___strncpy_from_user_done, tr1 + or r4, ZERO, r5 /* r5 = original count */ + beq/u r4, r63, tr1 /* early exit if r4==0 */ + movi -(EFAULT), r6 /* r6 = reply, no real fixup */ + or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ + +___strncpy_from_user1: + ld.b r3, 0, r7 /* Fault address: only in reading */ + st.b r2, 0, r7 + addi r2, 1, r2 + addi r3, 1, r3 + beq/u ZERO, r7, tr1 + addi r4, -1, r4 /* return real number of copied bytes */ + bne/l ZERO, r4, tr0 + +___strncpy_from_user_done: + sub r5, r4, r6 /* If done, return copied */ + +___strncpy_from_user_exit: + or r6, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * extern long __strnlen_user(const char *__s, long __n) + * + * Inputs: + * (r2) source address + * (r3) source size in bytes + * + * Ouputs: + * (r2) -EFAULT (in case of faulting) + * string length (otherwise) + */ + .global __strnlen_user +__strnlen_user: + pta ___strnlen_user_set_reply, tr0 + pta ___strnlen_user1, tr1 + or ZERO, ZERO, r5 /* r5 = counter */ + movi -(EFAULT), r6 /* r6 = reply, no real fixup */ + or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ + beq r3, ZERO, tr0 + +___strnlen_user1: + ldx.b r2, r5, r7 /* Fault address: only in reading */ + addi r3, -1, r3 /* No real fixup */ + addi r5, 1, r5 + beq r3, ZERO, tr0 + bne r7, ZERO, tr1 +! The line below used to be active. This meant led to a junk byte lying between each pair +! of entries in the argv & envp structures in memory. Whilst the program saw the right data +! via the argv and envp arguments to main, it meant the 'flat' representation visible through +! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example. +! addi r5, 1, r5 /* Include '\0' */ + +___strnlen_user_set_reply: + or r5, ZERO, r6 /* If done, return counter */ + +___strnlen_user_exit: + or r6, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * extern long __get_user_asm_?(void *val, long addr) + * + * Inputs: + * (r2) dest address + * (r3) source address (in User Space) + * + * Ouputs: + * (r2) -EFAULT (faulting) + * 0 (not faulting) + */ + .global __get_user_asm_b +__get_user_asm_b: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_b1: + ld.b r3, 0, r5 /* r5 = data */ + st.b r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_b_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __get_user_asm_w +__get_user_asm_w: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_w1: + ld.w r3, 0, r5 /* r5 = data */ + st.w r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_w_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __get_user_asm_l +__get_user_asm_l: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_l1: + ld.l r3, 0, r5 /* r5 = data */ + st.l r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_l_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __get_user_asm_q +__get_user_asm_q: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_q1: + ld.q r3, 0, r5 /* r5 = data */ + st.q r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_q_exit: + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * extern long __put_user_asm_?(void *pval, long addr) + * + * Inputs: + * (r2) kernel pointer to value + * (r3) dest address (in User Space) + * + * Ouputs: + * (r2) -EFAULT (faulting) + * 0 (not faulting) + */ + .global __put_user_asm_b +__put_user_asm_b: + ld.b r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_b1: + st.b r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_b_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __put_user_asm_w +__put_user_asm_w: + ld.w r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_w1: + st.w r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_w_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __put_user_asm_l +__put_user_asm_l: + ld.l r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_l1: + st.l r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_l_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __put_user_asm_q +__put_user_asm_q: + ld.q r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_q1: + st.q r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_q_exit: + ptabs LINK, tr0 + blink tr0, ZERO + +panic_stash_regs: + /* The idea is : when we get an unhandled panic, we dump the registers + to a known memory location, the just sit in a tight loop. + This allows the human to look at the memory region through the GDB + session (assuming the debug module's SHwy initiator isn't locked up + or anything), to hopefully analyze the cause of the panic. */ + + /* On entry, former r15 (SP) is in DCR + former r0 is at resvec_saved_area + 0 + former r1 is at resvec_saved_area + 8 + former tr0 is at resvec_saved_area + 32 + DCR is the only register whose value is lost altogether. + */ + + movi 0xffffffff80000000, r0 ! phy of dump area + ld.q SP, 0x000, r1 ! former r0 + st.q r0, 0x000, r1 + ld.q SP, 0x008, r1 ! former r1 + st.q r0, 0x008, r1 + st.q r0, 0x010, r2 + st.q r0, 0x018, r3 + st.q r0, 0x020, r4 + st.q r0, 0x028, r5 + st.q r0, 0x030, r6 + st.q r0, 0x038, r7 + st.q r0, 0x040, r8 + st.q r0, 0x048, r9 + st.q r0, 0x050, r10 + st.q r0, 0x058, r11 + st.q r0, 0x060, r12 + st.q r0, 0x068, r13 + st.q r0, 0x070, r14 + getcon dcr, r14 + st.q r0, 0x078, r14 + st.q r0, 0x080, r16 + st.q r0, 0x088, r17 + st.q r0, 0x090, r18 + st.q r0, 0x098, r19 + st.q r0, 0x0a0, r20 + st.q r0, 0x0a8, r21 + st.q r0, 0x0b0, r22 + st.q r0, 0x0b8, r23 + st.q r0, 0x0c0, r24 + st.q r0, 0x0c8, r25 + st.q r0, 0x0d0, r26 + st.q r0, 0x0d8, r27 + st.q r0, 0x0e0, r28 + st.q r0, 0x0e8, r29 + st.q r0, 0x0f0, r30 + st.q r0, 0x0f8, r31 + st.q r0, 0x100, r32 + st.q r0, 0x108, r33 + st.q r0, 0x110, r34 + st.q r0, 0x118, r35 + st.q r0, 0x120, r36 + st.q r0, 0x128, r37 + st.q r0, 0x130, r38 + st.q r0, 0x138, r39 + st.q r0, 0x140, r40 + st.q r0, 0x148, r41 + st.q r0, 0x150, r42 + st.q r0, 0x158, r43 + st.q r0, 0x160, r44 + st.q r0, 0x168, r45 + st.q r0, 0x170, r46 + st.q r0, 0x178, r47 + st.q r0, 0x180, r48 + st.q r0, 0x188, r49 + st.q r0, 0x190, r50 + st.q r0, 0x198, r51 + st.q r0, 0x1a0, r52 + st.q r0, 0x1a8, r53 + st.q r0, 0x1b0, r54 + st.q r0, 0x1b8, r55 + st.q r0, 0x1c0, r56 + st.q r0, 0x1c8, r57 + st.q r0, 0x1d0, r58 + st.q r0, 0x1d8, r59 + st.q r0, 0x1e0, r60 + st.q r0, 0x1e8, r61 + st.q r0, 0x1f0, r62 + st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake... + + ld.q SP, 0x020, r1 ! former tr0 + st.q r0, 0x200, r1 + gettr tr1, r1 + st.q r0, 0x208, r1 + gettr tr2, r1 + st.q r0, 0x210, r1 + gettr tr3, r1 + st.q r0, 0x218, r1 + gettr tr4, r1 + st.q r0, 0x220, r1 + gettr tr5, r1 + st.q r0, 0x228, r1 + gettr tr6, r1 + st.q r0, 0x230, r1 + gettr tr7, r1 + st.q r0, 0x238, r1 + + getcon sr, r1 + getcon ssr, r2 + getcon pssr, r3 + getcon spc, r4 + getcon pspc, r5 + getcon intevt, r6 + getcon expevt, r7 + getcon pexpevt, r8 + getcon tra, r9 + getcon tea, r10 + getcon kcr0, r11 + getcon kcr1, r12 + getcon vbr, r13 + getcon resvec, r14 + + st.q r0, 0x240, r1 + st.q r0, 0x248, r2 + st.q r0, 0x250, r3 + st.q r0, 0x258, r4 + st.q r0, 0x260, r5 + st.q r0, 0x268, r6 + st.q r0, 0x270, r7 + st.q r0, 0x278, r8 + st.q r0, 0x280, r9 + st.q r0, 0x288, r10 + st.q r0, 0x290, r11 + st.q r0, 0x298, r12 + st.q r0, 0x2a0, r13 + st.q r0, 0x2a8, r14 + + getcon SPC,r2 + getcon SSR,r3 + getcon EXPEVT,r4 + /* Prepare to jump to C - physical address */ + movi panic_handler-CONFIG_CACHED_MEMORY_OFFSET, r1 + ori r1, 1, r1 + ptabs r1, tr0 + getcon DCR, SP + blink tr0, ZERO + nop + nop + nop + nop + + + + +/* + * --- Signal Handling Section + */ + +/* + * extern long long _sa_default_rt_restorer + * extern long long _sa_default_restorer + * + * or, better, + * + * extern void _sa_default_rt_restorer(void) + * extern void _sa_default_restorer(void) + * + * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn() + * from user space. Copied into user space by signal management. + * Both must be quad aligned and 2 quad long (4 instructions). + * + */ + .balign 8 + .global sa_default_rt_restorer +sa_default_rt_restorer: + movi 0x10, r9 + shori __NR_rt_sigreturn, r9 + trapa r9 + nop + + .balign 8 + .global sa_default_restorer +sa_default_restorer: + movi 0x10, r9 + shori __NR_sigreturn, r9 + trapa r9 + nop + +/* + * --- __ex_table Section + */ + +/* + * User Access Exception Table. + */ + .section __ex_table, "a" + + .global asm_uaccess_start /* Just a marker */ +asm_uaccess_start: + + .long ___copy_user1, ___copy_user_exit + .long ___copy_user2, ___copy_user_exit + .long ___clear_user1, ___clear_user_exit + .long ___strncpy_from_user1, ___strncpy_from_user_exit + .long ___strnlen_user1, ___strnlen_user_exit + .long ___get_user_asm_b1, ___get_user_asm_b_exit + .long ___get_user_asm_w1, ___get_user_asm_w_exit + .long ___get_user_asm_l1, ___get_user_asm_l_exit + .long ___get_user_asm_q1, ___get_user_asm_q_exit + .long ___put_user_asm_b1, ___put_user_asm_b_exit + .long ___put_user_asm_w1, ___put_user_asm_w_exit + .long ___put_user_asm_l1, ___put_user_asm_l_exit + .long ___put_user_asm_q1, ___put_user_asm_q_exit + + .global asm_uaccess_end /* Just a marker */ +asm_uaccess_end: + + + + +/* + * --- .text.init Section + */ + + .section .text.init, "ax" + +/* + * void trap_init (void) + * + */ + .global trap_init +trap_init: + addi SP, -24, SP /* Room to save r28/r29/r30 */ + st.q SP, 0, r28 + st.q SP, 8, r29 + st.q SP, 16, r30 + + /* Set VBR and RESVEC */ + movi LVBR_block, r19 + andi r19, -4, r19 /* reset MMUOFF + reserved */ + /* For RESVEC exceptions we force the MMU off, which means we need the + physical address. */ + movi LRESVEC_block-CONFIG_CACHED_MEMORY_OFFSET, r20 + andi r20, -4, r20 /* reset reserved */ + ori r20, 1, r20 /* set MMUOFF */ + putcon r19, VBR + putcon r20, RESVEC + + /* Sanity check */ + movi LVBR_block_end, r21 + andi r21, -4, r21 + movi BLOCK_SIZE, r29 /* r29 = expected size */ + or r19, ZERO, r30 + add r19, r29, r19 + + /* + * Ugly, but better loop forever now than crash afterwards. + * We should print a message, but if we touch LVBR or + * LRESVEC blocks we should not be surprised if we get stuck + * in trap_init(). + */ + pta trap_init_loop, tr1 + gettr tr1, r28 /* r28 = trap_init_loop */ + sub r21, r30, r30 /* r30 = actual size */ + + /* + * VBR/RESVEC handlers overlap by being bigger than + * allowed. Very bad. Just loop forever. + * (r28) panic/loop address + * (r29) expected size + * (r30) actual size + */ +trap_init_loop: + bne r19, r21, tr1 + + /* Now that exception vectors are set up reset SR.BL */ + getcon SR, r22 + movi SR_UNBLOCK_EXC, r23 + and r22, r23, r22 + putcon r22, SR + + addi SP, 24, SP + ptabs LINK, tr0 + blink tr0, ZERO + diff --git a/arch/sh64/kernel/entry.S b/arch/sh64/kernel/entry.S deleted file mode 100644 index 7013fcb6665..00000000000 --- a/arch/sh64/kernel/entry.S +++ /dev/null @@ -1,2102 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/entry.S - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004, 2005 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - */ - -#include -#include - -#include -#include -#include -#include -#include - -/* - * SR fields. - */ -#define SR_ASID_MASK 0x00ff0000 -#define SR_FD_MASK 0x00008000 -#define SR_SS 0x08000000 -#define SR_BL 0x10000000 -#define SR_MD 0x40000000 - -/* - * Event code. - */ -#define EVENT_INTERRUPT 0 -#define EVENT_FAULT_TLB 1 -#define EVENT_FAULT_NOT_TLB 2 -#define EVENT_DEBUG 3 - -/* EXPEVT values */ -#define RESET_CAUSE 0x20 -#define DEBUGSS_CAUSE 0x980 - -/* - * Frame layout. Quad index. - */ -#define FRAME_T(x) FRAME_TBASE+(x*8) -#define FRAME_R(x) FRAME_RBASE+(x*8) -#define FRAME_S(x) FRAME_SBASE+(x*8) -#define FSPC 0 -#define FSSR 1 -#define FSYSCALL_ID 2 - -/* Arrange the save frame to be a multiple of 32 bytes long */ -#define FRAME_SBASE 0 -#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */ -#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */ -#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */ -#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */ - -#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */ -#define FP_FRAME_BASE 0 - -#define SAVED_R2 0*8 -#define SAVED_R3 1*8 -#define SAVED_R4 2*8 -#define SAVED_R5 3*8 -#define SAVED_R18 4*8 -#define SAVED_R6 5*8 -#define SAVED_TR0 6*8 - -/* These are the registers saved in the TLB path that aren't saved in the first - level of the normal one. */ -#define TLB_SAVED_R25 7*8 -#define TLB_SAVED_TR1 8*8 -#define TLB_SAVED_TR2 9*8 -#define TLB_SAVED_TR3 10*8 -#define TLB_SAVED_TR4 11*8 -/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing - breakage otherwise. */ -#define TLB_SAVED_R0 12*8 -#define TLB_SAVED_R1 13*8 - -#define CLI() \ - getcon SR, r6; \ - ori r6, 0xf0, r6; \ - putcon r6, SR; - -#define STI() \ - getcon SR, r6; \ - andi r6, ~0xf0, r6; \ - putcon r6, SR; - -#ifdef CONFIG_PREEMPT -# define preempt_stop() CLI() -#else -# define preempt_stop() -# define resume_kernel restore_all -#endif - - .section .data, "aw" - -#define FAST_TLBMISS_STACK_CACHELINES 4 -#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES) - -/* Register back-up area for all exceptions */ - .balign 32 - /* Allow for 16 quadwords to be pushed by fast tlbmiss handling - * register saves etc. */ - .fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0 -/* This is 32 byte aligned by construction */ -/* Register back-up area for all exceptions */ -reg_save_area: - .quad 0 - .quad 0 - .quad 0 - .quad 0 - - .quad 0 - .quad 0 - .quad 0 - .quad 0 - - .quad 0 - .quad 0 - .quad 0 - .quad 0 - - .quad 0 - .quad 0 - -/* Save area for RESVEC exceptions. We cannot use reg_save_area because of - * reentrancy. Note this area may be accessed via physical address. - * Align so this fits a whole single cache line, for ease of purging. - */ - .balign 32,0,32 -resvec_save_area: - .quad 0 - .quad 0 - .quad 0 - .quad 0 - .quad 0 - .balign 32,0,32 - -/* Jump table of 3rd level handlers */ -trap_jtable: - .long do_exception_error /* 0x000 */ - .long do_exception_error /* 0x020 */ - .long tlb_miss_load /* 0x040 */ - .long tlb_miss_store /* 0x060 */ - ! ARTIFICIAL pseudo-EXPEVT setting - .long do_debug_interrupt /* 0x080 */ - .long tlb_miss_load /* 0x0A0 */ - .long tlb_miss_store /* 0x0C0 */ - .long do_address_error_load /* 0x0E0 */ - .long do_address_error_store /* 0x100 */ -#ifdef CONFIG_SH_FPU - .long do_fpu_error /* 0x120 */ -#else - .long do_exception_error /* 0x120 */ -#endif - .long do_exception_error /* 0x140 */ - .long system_call /* 0x160 */ - .long do_reserved_inst /* 0x180 */ - .long do_illegal_slot_inst /* 0x1A0 */ - .long do_NMI /* 0x1C0 */ - .long do_exception_error /* 0x1E0 */ - .rept 15 - .long do_IRQ /* 0x200 - 0x3C0 */ - .endr - .long do_exception_error /* 0x3E0 */ - .rept 32 - .long do_IRQ /* 0x400 - 0x7E0 */ - .endr - .long fpu_error_or_IRQA /* 0x800 */ - .long fpu_error_or_IRQB /* 0x820 */ - .long do_IRQ /* 0x840 */ - .long do_IRQ /* 0x860 */ - .rept 6 - .long do_exception_error /* 0x880 - 0x920 */ - .endr - .long do_software_break_point /* 0x940 */ - .long do_exception_error /* 0x960 */ - .long do_single_step /* 0x980 */ - - .rept 3 - .long do_exception_error /* 0x9A0 - 0x9E0 */ - .endr - .long do_IRQ /* 0xA00 */ - .long do_IRQ /* 0xA20 */ - .long itlb_miss_or_IRQ /* 0xA40 */ - .long do_IRQ /* 0xA60 */ - .long do_IRQ /* 0xA80 */ - .long itlb_miss_or_IRQ /* 0xAA0 */ - .long do_exception_error /* 0xAC0 */ - .long do_address_error_exec /* 0xAE0 */ - .rept 8 - .long do_exception_error /* 0xB00 - 0xBE0 */ - .endr - .rept 18 - .long do_IRQ /* 0xC00 - 0xE20 */ - .endr - - .section .text64, "ax" - -/* - * --- Exception/Interrupt/Event Handling Section - */ - -/* - * VBR and RESVEC blocks. - * - * First level handler for VBR-based exceptions. - * - * To avoid waste of space, align to the maximum text block size. - * This is assumed to be at most 128 bytes or 32 instructions. - * DO NOT EXCEED 32 instructions on the first level handlers ! - * - * Also note that RESVEC is contained within the VBR block - * where the room left (1KB - TEXT_SIZE) allows placing - * the RESVEC block (at most 512B + TEXT_SIZE). - * - * So first (and only) level handler for RESVEC-based exceptions. - * - * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss - * and interrupt) we are a lot tight with register space until - * saving onto the stack frame, which is done in handle_exception(). - * - */ - -#define TEXT_SIZE 128 -#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */ - - .balign TEXT_SIZE -LVBR_block: - .space 256, 0 /* Power-on class handler, */ - /* not required here */ -not_a_tlb_miss: - synco /* TAKum03020 (but probably a good idea anyway.) */ - /* Save original stack pointer into KCR1 */ - putcon SP, KCR1 - - /* Save other original registers into reg_save_area */ - movi reg_save_area, SP - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* Set args for Non-debug, Not a TLB miss class handler */ - getcon EXPEVT, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_FAULT_NOT_TLB, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - - .balign 256 - ! VBR+0x200 - nop - .balign 256 - ! VBR+0x300 - nop - .balign 256 - /* - * Instead of the natural .balign 1024 place RESVEC here - * respecting the final 1KB alignment. - */ - .balign TEXT_SIZE - /* - * Instead of '.space 1024-TEXT_SIZE' place the RESVEC - * block making sure the final alignment is correct. - */ -tlb_miss: - synco /* TAKum03020 (but probably a good idea anyway.) */ - putcon SP, KCR1 - movi reg_save_area, SP - /* SP is guaranteed 32-byte aligned. */ - st.q SP, TLB_SAVED_R0 , r0 - st.q SP, TLB_SAVED_R1 , r1 - st.q SP, SAVED_R2 , r2 - st.q SP, SAVED_R3 , r3 - st.q SP, SAVED_R4 , r4 - st.q SP, SAVED_R5 , r5 - st.q SP, SAVED_R6 , r6 - st.q SP, SAVED_R18, r18 - - /* Save R25 for safety; as/ld may want to use it to achieve the call to - * the code in mm/tlbmiss.c */ - st.q SP, TLB_SAVED_R25, r25 - gettr tr0, r2 - gettr tr1, r3 - gettr tr2, r4 - gettr tr3, r5 - gettr tr4, r18 - st.q SP, SAVED_TR0 , r2 - st.q SP, TLB_SAVED_TR1 , r3 - st.q SP, TLB_SAVED_TR2 , r4 - st.q SP, TLB_SAVED_TR3 , r5 - st.q SP, TLB_SAVED_TR4 , r18 - - pt do_fast_page_fault, tr0 - getcon SSR, r2 - getcon EXPEVT, r3 - getcon TEA, r4 - shlri r2, 30, r2 - andi r2, 1, r2 /* r2 = SSR.MD */ - blink tr0, LINK - - pt fixup_to_invoke_general_handler, tr1 - - /* If the fast path handler fixed the fault, just drop through quickly - to the restore code right away to return to the excepting context. - */ - beqi/u r2, 0, tr1 - -fast_tlb_miss_restore: - ld.q SP, SAVED_TR0, r2 - ld.q SP, TLB_SAVED_TR1, r3 - ld.q SP, TLB_SAVED_TR2, r4 - - ld.q SP, TLB_SAVED_TR3, r5 - ld.q SP, TLB_SAVED_TR4, r18 - - ptabs r2, tr0 - ptabs r3, tr1 - ptabs r4, tr2 - ptabs r5, tr3 - ptabs r18, tr4 - - ld.q SP, TLB_SAVED_R0, r0 - ld.q SP, TLB_SAVED_R1, r1 - ld.q SP, SAVED_R2, r2 - ld.q SP, SAVED_R3, r3 - ld.q SP, SAVED_R4, r4 - ld.q SP, SAVED_R5, r5 - ld.q SP, SAVED_R6, r6 - ld.q SP, SAVED_R18, r18 - ld.q SP, TLB_SAVED_R25, r25 - - getcon KCR1, SP - rte - nop /* for safety, in case the code is run on sh5-101 cut1.x */ - -fixup_to_invoke_general_handler: - - /* OK, new method. Restore stuff that's not expected to get saved into - the 'first-level' reg save area, then just fall through to setting - up the registers and calling the second-level handler. */ - - /* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore - r25,tr1-4 and save r6 to get into the right state. */ - - ld.q SP, TLB_SAVED_TR1, r3 - ld.q SP, TLB_SAVED_TR2, r4 - ld.q SP, TLB_SAVED_TR3, r5 - ld.q SP, TLB_SAVED_TR4, r18 - ld.q SP, TLB_SAVED_R25, r25 - - ld.q SP, TLB_SAVED_R0, r0 - ld.q SP, TLB_SAVED_R1, r1 - - ptabs/u r3, tr1 - ptabs/u r4, tr2 - ptabs/u r5, tr3 - ptabs/u r18, tr4 - - /* Set args for Non-debug, TLB miss class handler */ - getcon EXPEVT, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_FAULT_TLB, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - -/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE - DOES END UP AT VBR+0x600 */ - nop - nop - nop - nop - nop - nop - - .balign 256 - /* VBR + 0x600 */ - -interrupt: - synco /* TAKum03020 (but probably a good idea anyway.) */ - /* Save original stack pointer into KCR1 */ - putcon SP, KCR1 - - /* Save other original registers into reg_save_area */ - movi reg_save_area, SP - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* Set args for interrupt class handler */ - getcon INTEVT, r2 - movi ret_from_irq, r3 - ori r3, 1, r3 - movi EVENT_INTERRUPT, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - .balign TEXT_SIZE /* let's waste the bare minimum */ - -LVBR_block_end: /* Marker. Used for total checking */ - - .balign 256 -LRESVEC_block: - /* Panic handler. Called with MMU off. Possible causes/actions: - * - Reset: Jump to program start. - * - Single Step: Turn off Single Step & return. - * - Others: Call panic handler, passing PC as arg. - * (this may need to be extended...) - */ -reset_or_panic: - synco /* TAKum03020 (but probably a good idea anyway.) */ - putcon SP, DCR - /* First save r0-1 and tr0, as we need to use these */ - movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP - st.q SP, 0, r0 - st.q SP, 8, r1 - gettr tr0, r0 - st.q SP, 32, r0 - - /* Check cause */ - getcon EXPEVT, r0 - movi RESET_CAUSE, r1 - sub r1, r0, r1 /* r1=0 if reset */ - movi _stext-CONFIG_CACHED_MEMORY_OFFSET, r0 - ori r0, 1, r0 - ptabs r0, tr0 - beqi r1, 0, tr0 /* Jump to start address if reset */ - - getcon EXPEVT, r0 - movi DEBUGSS_CAUSE, r1 - sub r1, r0, r1 /* r1=0 if single step */ - pta single_step_panic, tr0 - beqi r1, 0, tr0 /* jump if single step */ - - /* Now jump to where we save the registers. */ - movi panic_stash_regs-CONFIG_CACHED_MEMORY_OFFSET, r1 - ptabs r1, tr0 - blink tr0, r63 - -single_step_panic: - /* We are in a handler with Single Step set. We need to resume the - * handler, by turning on MMU & turning off Single Step. */ - getcon SSR, r0 - movi SR_MMU, r1 - or r0, r1, r0 - movi ~SR_SS, r1 - and r0, r1, r0 - putcon r0, SSR - /* Restore EXPEVT, as the rte won't do this */ - getcon PEXPEVT, r0 - putcon r0, EXPEVT - /* Restore regs */ - ld.q SP, 32, r0 - ptabs r0, tr0 - ld.q SP, 0, r0 - ld.q SP, 8, r1 - getcon DCR, SP - synco - rte - - - .balign 256 -debug_exception: - synco /* TAKum03020 (but probably a good idea anyway.) */ - /* - * Single step/software_break_point first level handler. - * Called with MMU off, so the first thing we do is enable it - * by doing an rte with appropriate SSR. - */ - putcon SP, DCR - /* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */ - movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP - - /* With the MMU off, we are bypassing the cache, so purge any - * data that will be made stale by the following stores. - */ - ocbp SP, 0 - synco - - st.q SP, 0, r0 - st.q SP, 8, r1 - getcon SPC, r0 - st.q SP, 16, r0 - getcon SSR, r0 - st.q SP, 24, r0 - - /* Enable MMU, block exceptions, set priv mode, disable single step */ - movi SR_MMU | SR_BL | SR_MD, r1 - or r0, r1, r0 - movi ~SR_SS, r1 - and r0, r1, r0 - putcon r0, SSR - /* Force control to debug_exception_2 when rte is executed */ - movi debug_exeception_2, r0 - ori r0, 1, r0 /* force SHmedia, just in case */ - putcon r0, SPC - getcon DCR, SP - synco - rte -debug_exeception_2: - /* Restore saved regs */ - putcon SP, KCR1 - movi resvec_save_area, SP - ld.q SP, 24, r0 - putcon r0, SSR - ld.q SP, 16, r0 - putcon r0, SPC - ld.q SP, 0, r0 - ld.q SP, 8, r1 - - /* Save other original registers into reg_save_area */ - movi reg_save_area, SP - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* Set args for debug class handler */ - getcon EXPEVT, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_DEBUG, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - - .balign 256 -debug_interrupt: - /* !!! WE COME HERE IN REAL MODE !!! */ - /* Hook-up debug interrupt to allow various debugging options to be - * hooked into its handler. */ - /* Save original stack pointer into KCR1 */ - synco - putcon SP, KCR1 - movi resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP - ocbp SP, 0 - ocbp SP, 32 - synco - - /* Save other original registers into reg_save_area thru real addresses */ - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* move (spc,ssr)->(pspc,pssr). The rte will shift - them back again, so that they look like the originals - as far as the real handler code is concerned. */ - getcon spc, r6 - putcon r6, pspc - getcon ssr, r6 - putcon r6, pssr - - ! construct useful SR for handle_exception - movi 3, r6 - shlli r6, 30, r6 - getcon sr, r18 - or r18, r6, r6 - putcon r6, ssr - - ! SSR is now the current SR with the MD and MMU bits set - ! i.e. the rte will switch back to priv mode and put - ! the mmu back on - - ! construct spc - movi handle_exception, r18 - ori r18, 1, r18 ! for safety (do we need this?) - putcon r18, spc - - /* Set args for Non-debug, Not a TLB miss class handler */ - - ! EXPEVT==0x80 is unused, so 'steal' this value to put the - ! debug interrupt handler in the vectoring table - movi 0x80, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_FAULT_NOT_TLB, r4 - - or SP, ZERO, r5 - movi CONFIG_CACHED_MEMORY_OFFSET, r6 - add r6, r5, r5 - getcon KCR1, SP - - synco ! for safety - rte ! -> handle_exception, switch back to priv mode again - -LRESVEC_block_end: /* Marker. Unused. */ - - .balign TEXT_SIZE - -/* - * Second level handler for VBR-based exceptions. Pre-handler. - * In common to all stack-frame sensitive handlers. - * - * Inputs: - * (KCR0) Current [current task union] - * (KCR1) Original SP - * (r2) INTEVT/EXPEVT - * (r3) appropriate return address - * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug) - * (r5) Pointer to reg_save_area - * (SP) Original SP - * - * Available registers: - * (r6) - * (r18) - * (tr0) - * - */ -handle_exception: - /* Common 2nd level handler. */ - - /* First thing we need an appropriate stack pointer */ - getcon SSR, r6 - shlri r6, 30, r6 - andi r6, 1, r6 - pta stack_ok, tr0 - bne r6, ZERO, tr0 /* Original stack pointer is fine */ - - /* Set stack pointer for user fault */ - getcon KCR0, SP - movi THREAD_SIZE, r6 /* Point to the end */ - add SP, r6, SP - -stack_ok: - -/* DEBUG : check for underflow/overflow of the kernel stack */ - pta no_underflow, tr0 - getcon KCR0, r6 - movi 1024, r18 - add r6, r18, r6 - bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone - -/* Just panic to cause a crash. */ -bad_sp: - ld.b r63, 0, r6 - nop - -no_underflow: - pta bad_sp, tr0 - getcon kcr0, r6 - movi THREAD_SIZE, r18 - add r18, r6, r6 - bgt SP, r6, tr0 ! sp above the stack - - /* Make some room for the BASIC frame. */ - movi -(FRAME_SIZE), r6 - add SP, r6, SP - -/* Could do this with no stalling if we had another spare register, but the - code below will be OK. */ - ld.q r5, SAVED_R2, r6 - ld.q r5, SAVED_R3, r18 - st.q SP, FRAME_R(2), r6 - ld.q r5, SAVED_R4, r6 - st.q SP, FRAME_R(3), r18 - ld.q r5, SAVED_R5, r18 - st.q SP, FRAME_R(4), r6 - ld.q r5, SAVED_R6, r6 - st.q SP, FRAME_R(5), r18 - ld.q r5, SAVED_R18, r18 - st.q SP, FRAME_R(6), r6 - ld.q r5, SAVED_TR0, r6 - st.q SP, FRAME_R(18), r18 - st.q SP, FRAME_T(0), r6 - - /* Keep old SP around */ - getcon KCR1, r6 - - /* Save the rest of the general purpose registers */ - st.q SP, FRAME_R(0), r0 - st.q SP, FRAME_R(1), r1 - st.q SP, FRAME_R(7), r7 - st.q SP, FRAME_R(8), r8 - st.q SP, FRAME_R(9), r9 - st.q SP, FRAME_R(10), r10 - st.q SP, FRAME_R(11), r11 - st.q SP, FRAME_R(12), r12 - st.q SP, FRAME_R(13), r13 - st.q SP, FRAME_R(14), r14 - - /* SP is somewhere else */ - st.q SP, FRAME_R(15), r6 - - st.q SP, FRAME_R(16), r16 - st.q SP, FRAME_R(17), r17 - /* r18 is saved earlier. */ - st.q SP, FRAME_R(19), r19 - st.q SP, FRAME_R(20), r20 - st.q SP, FRAME_R(21), r21 - st.q SP, FRAME_R(22), r22 - st.q SP, FRAME_R(23), r23 - st.q SP, FRAME_R(24), r24 - st.q SP, FRAME_R(25), r25 - st.q SP, FRAME_R(26), r26 - st.q SP, FRAME_R(27), r27 - st.q SP, FRAME_R(28), r28 - st.q SP, FRAME_R(29), r29 - st.q SP, FRAME_R(30), r30 - st.q SP, FRAME_R(31), r31 - st.q SP, FRAME_R(32), r32 - st.q SP, FRAME_R(33), r33 - st.q SP, FRAME_R(34), r34 - st.q SP, FRAME_R(35), r35 - st.q SP, FRAME_R(36), r36 - st.q SP, FRAME_R(37), r37 - st.q SP, FRAME_R(38), r38 - st.q SP, FRAME_R(39), r39 - st.q SP, FRAME_R(40), r40 - st.q SP, FRAME_R(41), r41 - st.q SP, FRAME_R(42), r42 - st.q SP, FRAME_R(43), r43 - st.q SP, FRAME_R(44), r44 - st.q SP, FRAME_R(45), r45 - st.q SP, FRAME_R(46), r46 - st.q SP, FRAME_R(47), r47 - st.q SP, FRAME_R(48), r48 - st.q SP, FRAME_R(49), r49 - st.q SP, FRAME_R(50), r50 - st.q SP, FRAME_R(51), r51 - st.q SP, FRAME_R(52), r52 - st.q SP, FRAME_R(53), r53 - st.q SP, FRAME_R(54), r54 - st.q SP, FRAME_R(55), r55 - st.q SP, FRAME_R(56), r56 - st.q SP, FRAME_R(57), r57 - st.q SP, FRAME_R(58), r58 - st.q SP, FRAME_R(59), r59 - st.q SP, FRAME_R(60), r60 - st.q SP, FRAME_R(61), r61 - st.q SP, FRAME_R(62), r62 - - /* - * Save the S* registers. - */ - getcon SSR, r61 - st.q SP, FRAME_S(FSSR), r61 - getcon SPC, r62 - st.q SP, FRAME_S(FSPC), r62 - movi -1, r62 /* Reset syscall_nr */ - st.q SP, FRAME_S(FSYSCALL_ID), r62 - - /* Save the rest of the target registers */ - gettr tr1, r6 - st.q SP, FRAME_T(1), r6 - gettr tr2, r6 - st.q SP, FRAME_T(2), r6 - gettr tr3, r6 - st.q SP, FRAME_T(3), r6 - gettr tr4, r6 - st.q SP, FRAME_T(4), r6 - gettr tr5, r6 - st.q SP, FRAME_T(5), r6 - gettr tr6, r6 - st.q SP, FRAME_T(6), r6 - gettr tr7, r6 - st.q SP, FRAME_T(7), r6 - - ! setup FP so that unwinder can wind back through nested kernel mode - ! exceptions - add SP, ZERO, r14 - -#ifdef CONFIG_POOR_MANS_STRACE - /* We've pushed all the registers now, so only r2-r4 hold anything - * useful. Move them into callee save registers */ - or r2, ZERO, r28 - or r3, ZERO, r29 - or r4, ZERO, r30 - - /* Preserve r2 as the event code */ - movi evt_debug, r3 - ori r3, 1, r3 - ptabs r3, tr0 - - or SP, ZERO, r6 - getcon TRA, r5 - blink tr0, LINK - - or r28, ZERO, r2 - or r29, ZERO, r3 - or r30, ZERO, r4 -#endif - - /* For syscall and debug race condition, get TRA now */ - getcon TRA, r5 - - /* We are in a safe position to turn SR.BL off, but set IMASK=0xf - * Also set FD, to catch FPU usage in the kernel. - * - * benedict.gaster@superh.com 29/07/2002 - * - * On all SH5-101 revisions it is unsafe to raise the IMASK and at the - * same time change BL from 1->0, as any pending interrupt of a level - * higher than he previous value of IMASK will leak through and be - * taken unexpectedly. - * - * To avoid this we raise the IMASK and then issue another PUTCON to - * enable interrupts. - */ - getcon SR, r6 - movi SR_IMASK | SR_FD, r7 - or r6, r7, r6 - putcon r6, SR - movi SR_UNBLOCK_EXC, r7 - and r6, r7, r6 - putcon r6, SR - - - /* Now call the appropriate 3rd level handler */ - or r3, ZERO, LINK - movi trap_jtable, r3 - shlri r2, 3, r2 - ldx.l r2, r3, r3 - shlri r2, 2, r2 - ptabs r3, tr0 - or SP, ZERO, r3 - blink tr0, ZERO - -/* - * Second level handler for VBR-based exceptions. Post-handlers. - * - * Post-handlers for interrupts (ret_from_irq), exceptions - * (ret_from_exception) and common reentrance doors (restore_all - * to get back to the original context, ret_from_syscall loop to - * check kernel exiting). - * - * ret_with_reschedule and work_notifysig are an inner lables of - * the ret_from_syscall loop. - * - * In common to all stack-frame sensitive handlers. - * - * Inputs: - * (SP) struct pt_regs *, original register's frame pointer (basic) - * - */ - .global ret_from_irq -ret_from_irq: -#ifdef CONFIG_POOR_MANS_STRACE - pta evt_debug_ret_from_irq, tr0 - ori SP, 0, r2 - blink tr0, LINK -#endif - ld.q SP, FRAME_S(FSSR), r6 - shlri r6, 30, r6 - andi r6, 1, r6 - pta resume_kernel, tr0 - bne r6, ZERO, tr0 /* no further checks */ - STI() - pta ret_with_reschedule, tr0 - blink tr0, ZERO /* Do not check softirqs */ - - .global ret_from_exception -ret_from_exception: - preempt_stop() - -#ifdef CONFIG_POOR_MANS_STRACE - pta evt_debug_ret_from_exc, tr0 - ori SP, 0, r2 - blink tr0, LINK -#endif - - ld.q SP, FRAME_S(FSSR), r6 - shlri r6, 30, r6 - andi r6, 1, r6 - pta resume_kernel, tr0 - bne r6, ZERO, tr0 /* no further checks */ - - /* Check softirqs */ - -#ifdef CONFIG_PREEMPT - pta ret_from_syscall, tr0 - blink tr0, ZERO - -resume_kernel: - pta restore_all, tr0 - - getcon KCR0, r6 - ld.l r6, TI_PRE_COUNT, r7 - beq/u r7, ZERO, tr0 - -need_resched: - ld.l r6, TI_FLAGS, r7 - movi (1 << TIF_NEED_RESCHED), r8 - and r8, r7, r8 - bne r8, ZERO, tr0 - - getcon SR, r7 - andi r7, 0xf0, r7 - bne r7, ZERO, tr0 - - movi ((PREEMPT_ACTIVE >> 16) & 65535), r8 - shori (PREEMPT_ACTIVE & 65535), r8 - st.l r6, TI_PRE_COUNT, r8 - - STI() - movi schedule, r7 - ori r7, 1, r7 - ptabs r7, tr1 - blink tr1, LINK - - st.l r6, TI_PRE_COUNT, ZERO - CLI() - - pta need_resched, tr1 - blink tr1, ZERO -#endif - - .global ret_from_syscall -ret_from_syscall: - -ret_with_reschedule: - getcon KCR0, r6 ! r6 contains current_thread_info - ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags - - ! FIXME:!!! - ! no handling of TIF_SYSCALL_TRACE yet!! - - movi _TIF_NEED_RESCHED, r8 - and r8, r7, r8 - pta work_resched, tr0 - bne r8, ZERO, tr0 - - pta restore_all, tr1 - - movi (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8 - and r8, r7, r8 - pta work_notifysig, tr0 - bne r8, ZERO, tr0 - - blink tr1, ZERO - -work_resched: - pta ret_from_syscall, tr0 - gettr tr0, LINK - movi schedule, r6 - ptabs r6, tr0 - blink tr0, ZERO /* Call schedule(), return on top */ - -work_notifysig: - gettr tr1, LINK - - movi do_signal, r6 - ptabs r6, tr0 - or SP, ZERO, r2 - or ZERO, ZERO, r3 - blink tr0, LINK /* Call do_signal(regs, 0), return here */ - -restore_all: - /* Do prefetches */ - - ld.q SP, FRAME_T(0), r6 - ld.q SP, FRAME_T(1), r7 - ld.q SP, FRAME_T(2), r8 - ld.q SP, FRAME_T(3), r9 - ptabs r6, tr0 - ptabs r7, tr1 - ptabs r8, tr2 - ptabs r9, tr3 - ld.q SP, FRAME_T(4), r6 - ld.q SP, FRAME_T(5), r7 - ld.q SP, FRAME_T(6), r8 - ld.q SP, FRAME_T(7), r9 - ptabs r6, tr4 - ptabs r7, tr5 - ptabs r8, tr6 - ptabs r9, tr7 - - ld.q SP, FRAME_R(0), r0 - ld.q SP, FRAME_R(1), r1 - ld.q SP, FRAME_R(2), r2 - ld.q SP, FRAME_R(3), r3 - ld.q SP, FRAME_R(4), r4 - ld.q SP, FRAME_R(5), r5 - ld.q SP, FRAME_R(6), r6 - ld.q SP, FRAME_R(7), r7 - ld.q SP, FRAME_R(8), r8 - ld.q SP, FRAME_R(9), r9 - ld.q SP, FRAME_R(10), r10 - ld.q SP, FRAME_R(11), r11 - ld.q SP, FRAME_R(12), r12 - ld.q SP, FRAME_R(13), r13 - ld.q SP, FRAME_R(14), r14 - - ld.q SP, FRAME_R(16), r16 - ld.q SP, FRAME_R(17), r17 - ld.q SP, FRAME_R(18), r18 - ld.q SP, FRAME_R(19), r19 - ld.q SP, FRAME_R(20), r20 - ld.q SP, FRAME_R(21), r21 - ld.q SP, FRAME_R(22), r22 - ld.q SP, FRAME_R(23), r23 - ld.q SP, FRAME_R(24), r24 - ld.q SP, FRAME_R(25), r25 - ld.q SP, FRAME_R(26), r26 - ld.q SP, FRAME_R(27), r27 - ld.q SP, FRAME_R(28), r28 - ld.q SP, FRAME_R(29), r29 - ld.q SP, FRAME_R(30), r30 - ld.q SP, FRAME_R(31), r31 - ld.q SP, FRAME_R(32), r32 - ld.q SP, FRAME_R(33), r33 - ld.q SP, FRAME_R(34), r34 - ld.q SP, FRAME_R(35), r35 - ld.q SP, FRAME_R(36), r36 - ld.q SP, FRAME_R(37), r37 - ld.q SP, FRAME_R(38), r38 - ld.q SP, FRAME_R(39), r39 - ld.q SP, FRAME_R(40), r40 - ld.q SP, FRAME_R(41), r41 - ld.q SP, FRAME_R(42), r42 - ld.q SP, FRAME_R(43), r43 - ld.q SP, FRAME_R(44), r44 - ld.q SP, FRAME_R(45), r45 - ld.q SP, FRAME_R(46), r46 - ld.q SP, FRAME_R(47), r47 - ld.q SP, FRAME_R(48), r48 - ld.q SP, FRAME_R(49), r49 - ld.q SP, FRAME_R(50), r50 - ld.q SP, FRAME_R(51), r51 - ld.q SP, FRAME_R(52), r52 - ld.q SP, FRAME_R(53), r53 - ld.q SP, FRAME_R(54), r54 - ld.q SP, FRAME_R(55), r55 - ld.q SP, FRAME_R(56), r56 - ld.q SP, FRAME_R(57), r57 - ld.q SP, FRAME_R(58), r58 - - getcon SR, r59 - movi SR_BLOCK_EXC, r60 - or r59, r60, r59 - putcon r59, SR /* SR.BL = 1, keep nesting out */ - ld.q SP, FRAME_S(FSSR), r61 - ld.q SP, FRAME_S(FSPC), r62 - movi SR_ASID_MASK, r60 - and r59, r60, r59 - andc r61, r60, r61 /* Clear out older ASID */ - or r59, r61, r61 /* Retain current ASID */ - putcon r61, SSR - putcon r62, SPC - - /* Ignore FSYSCALL_ID */ - - ld.q SP, FRAME_R(59), r59 - ld.q SP, FRAME_R(60), r60 - ld.q SP, FRAME_R(61), r61 - ld.q SP, FRAME_R(62), r62 - - /* Last touch */ - ld.q SP, FRAME_R(15), SP - rte - nop - -/* - * Third level handlers for VBR-based exceptions. Adapting args to - * and/or deflecting to fourth level handlers. - * - * Fourth level handlers interface. - * Most are C-coded handlers directly pointed by the trap_jtable. - * (Third = Fourth level) - * Inputs: - * (r2) fault/interrupt code, entry number (e.g. NMI = 14, - * IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...) - * (r3) struct pt_regs *, original register's frame pointer - * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault) - * (r5) TRA control register (for syscall/debug benefit only) - * (LINK) return address - * (SP) = r3 - * - * Kernel TLB fault handlers will get a slightly different interface. - * (r2) struct pt_regs *, original register's frame pointer - * (r3) writeaccess, whether it's a store fault as opposed to load fault - * (r4) execaccess, whether it's a ITLB fault as opposed to DTLB fault - * (r5) Effective Address of fault - * (LINK) return address - * (SP) = r2 - * - * fpu_error_or_IRQ? is a helper to deflect to the right cause. - * - */ -tlb_miss_load: - or SP, ZERO, r2 - or ZERO, ZERO, r3 /* Read */ - or ZERO, ZERO, r4 /* Data */ - getcon TEA, r5 - pta call_do_page_fault, tr0 - beq ZERO, ZERO, tr0 - -tlb_miss_store: - or SP, ZERO, r2 - movi 1, r3 /* Write */ - or ZERO, ZERO, r4 /* Data */ - getcon TEA, r5 - pta call_do_page_fault, tr0 - beq ZERO, ZERO, tr0 - -itlb_miss_or_IRQ: - pta its_IRQ, tr0 - beqi/u r4, EVENT_INTERRUPT, tr0 - or SP, ZERO, r2 - or ZERO, ZERO, r3 /* Read */ - movi 1, r4 /* Text */ - getcon TEA, r5 - /* Fall through */ - -call_do_page_fault: - movi do_page_fault, r6 - ptabs r6, tr0 - blink tr0, ZERO - -fpu_error_or_IRQA: - pta its_IRQ, tr0 - beqi/l r4, EVENT_INTERRUPT, tr0 -#ifdef CONFIG_SH_FPU - movi do_fpu_state_restore, r6 -#else - movi do_exception_error, r6 -#endif - ptabs r6, tr0 - blink tr0, ZERO - -fpu_error_or_IRQB: - pta its_IRQ, tr0 - beqi/l r4, EVENT_INTERRUPT, tr0 -#ifdef CONFIG_SH_FPU - movi do_fpu_state_restore, r6 -#else - movi do_exception_error, r6 -#endif - ptabs r6, tr0 - blink tr0, ZERO - -its_IRQ: - movi do_IRQ, r6 - ptabs r6, tr0 - blink tr0, ZERO - -/* - * system_call/unknown_trap third level handler: - * - * Inputs: - * (r2) fault/interrupt code, entry number (TRAP = 11) - * (r3) struct pt_regs *, original register's frame pointer - * (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault) - * (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr) - * (SP) = r3 - * (LINK) return address: ret_from_exception - * (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7) - * - * Outputs: - * (*r3) Syscall reply (Saved r2) - * (LINK) In case of syscall only it can be scrapped. - * Common second level post handler will be ret_from_syscall. - * Common (non-trace) exit point to that is syscall_ret (saving - * result to r2). Common bad exit point is syscall_bad (returning - * ENOSYS then saved to r2). - * - */ - -unknown_trap: - /* Unknown Trap or User Trace */ - movi do_unknown_trapa, r6 - ptabs r6, tr0 - ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */ - andi r2, 0x1ff, r2 /* r2 = syscall # */ - blink tr0, LINK - - pta syscall_ret, tr0 - blink tr0, ZERO - - /* New syscall implementation*/ -system_call: - pta unknown_trap, tr0 - or r5, ZERO, r4 /* TRA (=r5) -> r4 */ - shlri r4, 20, r4 - bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */ - - /* It's a system call */ - st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */ - andi r5, 0x1ff, r5 /* syscall # -> r5 */ - - STI() - - pta syscall_allowed, tr0 - movi NR_syscalls - 1, r4 /* Last valid */ - bgeu/l r4, r5, tr0 - -syscall_bad: - /* Return ENOSYS ! */ - movi -(ENOSYS), r2 /* Fall-through */ - - .global syscall_ret -syscall_ret: - st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */ - -#ifdef CONFIG_POOR_MANS_STRACE - /* nothing useful in registers at this point */ - - movi evt_debug2, r5 - ori r5, 1, r5 - ptabs r5, tr0 - ld.q SP, FRAME_R(9), r2 - or SP, ZERO, r3 - blink tr0, LINK -#endif - - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - pta ret_from_syscall, tr0 - blink tr0, ZERO - - -/* A different return path for ret_from_fork, because we now need - * to call schedule_tail with the later kernels. Because prev is - * loaded into r2 by switch_to() means we can just call it straight away - */ - -.global ret_from_fork -ret_from_fork: - - movi schedule_tail,r5 - ori r5, 1, r5 - ptabs r5, tr0 - blink tr0, LINK - -#ifdef CONFIG_POOR_MANS_STRACE - /* nothing useful in registers at this point */ - - movi evt_debug2, r5 - ori r5, 1, r5 - ptabs r5, tr0 - ld.q SP, FRAME_R(9), r2 - or SP, ZERO, r3 - blink tr0, LINK -#endif - - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - pta ret_from_syscall, tr0 - blink tr0, ZERO - - - -syscall_allowed: - /* Use LINK to deflect the exit point, default is syscall_ret */ - pta syscall_ret, tr0 - gettr tr0, LINK - pta syscall_notrace, tr0 - - getcon KCR0, r2 - ld.l r2, TI_FLAGS, r4 - movi (1 << TIF_SYSCALL_TRACE), r6 - and r6, r4, r6 - beq/l r6, ZERO, tr0 - - /* Trace it by calling syscall_trace before and after */ - movi syscall_trace, r4 - ptabs r4, tr0 - blink tr0, LINK - /* Reload syscall number as r5 is trashed by syscall_trace */ - ld.q SP, FRAME_S(FSYSCALL_ID), r5 - andi r5, 0x1ff, r5 - - pta syscall_ret_trace, tr0 - gettr tr0, LINK - -syscall_notrace: - /* Now point to the appropriate 4th level syscall handler */ - movi sys_call_table, r4 - shlli r5, 2, r5 - ldx.l r4, r5, r5 - ptabs r5, tr0 - - /* Prepare original args */ - ld.q SP, FRAME_R(2), r2 - ld.q SP, FRAME_R(3), r3 - ld.q SP, FRAME_R(4), r4 - ld.q SP, FRAME_R(5), r5 - ld.q SP, FRAME_R(6), r6 - ld.q SP, FRAME_R(7), r7 - - /* And now the trick for those syscalls requiring regs * ! */ - or SP, ZERO, r8 - - /* Call it */ - blink tr0, ZERO /* LINK is already properly set */ - -syscall_ret_trace: - /* We get back here only if under trace */ - st.q SP, FRAME_R(9), r2 /* Save return value */ - - movi syscall_trace, LINK - ptabs LINK, tr0 - blink tr0, LINK - - /* This needs to be done after any syscall tracing */ - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - - pta ret_from_syscall, tr0 - blink tr0, ZERO /* Resume normal return sequence */ - -/* - * --- Switch to running under a particular ASID and return the previous ASID value - * --- The caller is assumed to have done a cli before calling this. - * - * Input r2 : new ASID - * Output r2 : old ASID - */ - - .global switch_and_save_asid -switch_and_save_asid: - getcon sr, r0 - movi 255, r4 - shlli r4, 16, r4 /* r4 = mask to select ASID */ - and r0, r4, r3 /* r3 = shifted old ASID */ - andi r2, 255, r2 /* mask down new ASID */ - shlli r2, 16, r2 /* align new ASID against SR.ASID */ - andc r0, r4, r0 /* efface old ASID from SR */ - or r0, r2, r0 /* insert the new ASID */ - putcon r0, ssr - movi 1f, r0 - putcon r0, spc - rte - nop -1: - ptabs LINK, tr0 - shlri r3, 16, r2 /* r2 = old ASID */ - blink tr0, r63 - - .global route_to_panic_handler -route_to_panic_handler: - /* Switch to real mode, goto panic_handler, don't return. Useful for - last-chance debugging, e.g. if no output wants to go to the console. - */ - - movi panic_handler - CONFIG_CACHED_MEMORY_OFFSET, r1 - ptabs r1, tr0 - pta 1f, tr1 - gettr tr1, r0 - putcon r0, spc - getcon sr, r0 - movi 1, r1 - shlli r1, 31, r1 - andc r0, r1, r0 - putcon r0, ssr - rte - nop -1: /* Now in real mode */ - blink tr0, r63 - nop - - .global peek_real_address_q -peek_real_address_q: - /* Two args: - r2 : real mode address to peek - r2(out) : result quadword - - This is provided as a cheapskate way of manipulating device - registers for debugging (to avoid the need to onchip_remap the debug - module, and to avoid the need to onchip_remap the watchpoint - controller in a way that identity maps sufficient bits to avoid the - SH5-101 cut2 silicon defect). - - This code is not performance critical - */ - - add.l r2, r63, r2 /* sign extend address */ - getcon sr, r0 /* r0 = saved original SR */ - movi 1, r1 - shlli r1, 28, r1 - or r0, r1, r1 /* r0 with block bit set */ - putcon r1, sr /* now in critical section */ - movi 1, r36 - shlli r36, 31, r36 - andc r1, r36, r1 /* turn sr.mmu off in real mode section */ - - putcon r1, ssr - movi .peek0 - CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */ - movi 1f, r37 /* virtual mode return addr */ - putcon r36, spc - - synco - rte - nop - -.peek0: /* come here in real mode, don't touch caches!! - still in critical section (sr.bl==1) */ - putcon r0, ssr - putcon r37, spc - /* Here's the actual peek. If the address is bad, all bets are now off - * what will happen (handlers invoked in real-mode = bad news) */ - ld.q r2, 0, r2 - synco - rte /* Back to virtual mode */ - nop - -1: - ptabs LINK, tr0 - blink tr0, r63 - - .global poke_real_address_q -poke_real_address_q: - /* Two args: - r2 : real mode address to poke - r3 : quadword value to write. - - This is provided as a cheapskate way of manipulating device - registers for debugging (to avoid the need to onchip_remap the debug - module, and to avoid the need to onchip_remap the watchpoint - controller in a way that identity maps sufficient bits to avoid the - SH5-101 cut2 silicon defect). - - This code is not performance critical - */ - - add.l r2, r63, r2 /* sign extend address */ - getcon sr, r0 /* r0 = saved original SR */ - movi 1, r1 - shlli r1, 28, r1 - or r0, r1, r1 /* r0 with block bit set */ - putcon r1, sr /* now in critical section */ - movi 1, r36 - shlli r36, 31, r36 - andc r1, r36, r1 /* turn sr.mmu off in real mode section */ - - putcon r1, ssr - movi .poke0-CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */ - movi 1f, r37 /* virtual mode return addr */ - putcon r36, spc - - synco - rte - nop - -.poke0: /* come here in real mode, don't touch caches!! - still in critical section (sr.bl==1) */ - putcon r0, ssr - putcon r37, spc - /* Here's the actual poke. If the address is bad, all bets are now off - * what will happen (handlers invoked in real-mode = bad news) */ - st.q r2, 0, r3 - synco - rte /* Back to virtual mode */ - nop - -1: - ptabs LINK, tr0 - blink tr0, r63 - -/* - * --- User Access Handling Section - */ - -/* - * User Access support. It all moved to non inlined Assembler - * functions in here. - * - * __kernel_size_t __copy_user(void *__to, const void *__from, - * __kernel_size_t __n) - * - * Inputs: - * (r2) target address - * (r3) source address - * (r4) size in bytes - * - * Ouputs: - * (*r2) target data - * (r2) non-copied bytes - * - * If a fault occurs on the user pointer, bail out early and return the - * number of bytes not copied in r2. - * Strategy : for large blocks, call a real memcpy function which can - * move >1 byte at a time using unaligned ld/st instructions, and can - * manipulate the cache using prefetch + alloco to improve the speed - * further. If a fault occurs in that function, just revert to the - * byte-by-byte approach used for small blocks; this is rare so the - * performance hit for that case does not matter. - * - * For small blocks it's not worth the overhead of setting up and calling - * the memcpy routine; do the copy a byte at a time. - * - */ - .global __copy_user -__copy_user: - pta __copy_user_byte_by_byte, tr1 - movi 16, r0 ! this value is a best guess, should tune it by benchmarking - bge/u r0, r4, tr1 - pta copy_user_memcpy, tr0 - addi SP, -32, SP - /* Save arguments in case we have to fix-up unhandled page fault */ - st.q SP, 0, r2 - st.q SP, 8, r3 - st.q SP, 16, r4 - st.q SP, 24, r35 ! r35 is callee-save - /* Save LINK in a register to reduce RTS time later (otherwise - ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */ - ori LINK, 0, r35 - blink tr0, LINK - - /* Copy completed normally if we get back here */ - ptabs r35, tr0 - ld.q SP, 24, r35 - /* don't restore r2-r4, pointless */ - /* set result=r2 to zero as the copy must have succeeded. */ - or r63, r63, r2 - addi SP, 32, SP - blink tr0, r63 ! RTS - - .global __copy_user_fixup -__copy_user_fixup: - /* Restore stack frame */ - ori r35, 0, LINK - ld.q SP, 24, r35 - ld.q SP, 16, r4 - ld.q SP, 8, r3 - ld.q SP, 0, r2 - addi SP, 32, SP - /* Fall through to original code, in the 'same' state we entered with */ - -/* The slow byte-by-byte method is used if the fast copy traps due to a bad - user address. In that rare case, the speed drop can be tolerated. */ -__copy_user_byte_by_byte: - pta ___copy_user_exit, tr1 - pta ___copy_user1, tr0 - beq/u r4, r63, tr1 /* early exit for zero length copy */ - sub r2, r3, r0 - addi r0, -1, r0 - -___copy_user1: - ld.b r3, 0, r5 /* Fault address 1 */ - - /* Could rewrite this to use just 1 add, but the second comes 'free' - due to load latency */ - addi r3, 1, r3 - addi r4, -1, r4 /* No real fixup required */ -___copy_user2: - stx.b r3, r0, r5 /* Fault address 2 */ - bne r4, ZERO, tr0 - -___copy_user_exit: - or r4, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * __kernel_size_t __clear_user(void *addr, __kernel_size_t size) - * - * Inputs: - * (r2) target address - * (r3) size in bytes - * - * Ouputs: - * (*r2) zero-ed target data - * (r2) non-zero-ed bytes - */ - .global __clear_user -__clear_user: - pta ___clear_user_exit, tr1 - pta ___clear_user1, tr0 - beq/u r3, r63, tr1 - -___clear_user1: - st.b r2, 0, ZERO /* Fault address */ - addi r2, 1, r2 - addi r3, -1, r3 /* No real fixup required */ - bne r3, ZERO, tr0 - -___clear_user_exit: - or r3, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - - -/* - * int __strncpy_from_user(unsigned long __dest, unsigned long __src, - * int __count) - * - * Inputs: - * (r2) target address - * (r3) source address - * (r4) maximum size in bytes - * - * Ouputs: - * (*r2) copied data - * (r2) -EFAULT (in case of faulting) - * copied data (otherwise) - */ - .global __strncpy_from_user -__strncpy_from_user: - pta ___strncpy_from_user1, tr0 - pta ___strncpy_from_user_done, tr1 - or r4, ZERO, r5 /* r5 = original count */ - beq/u r4, r63, tr1 /* early exit if r4==0 */ - movi -(EFAULT), r6 /* r6 = reply, no real fixup */ - or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ - -___strncpy_from_user1: - ld.b r3, 0, r7 /* Fault address: only in reading */ - st.b r2, 0, r7 - addi r2, 1, r2 - addi r3, 1, r3 - beq/u ZERO, r7, tr1 - addi r4, -1, r4 /* return real number of copied bytes */ - bne/l ZERO, r4, tr0 - -___strncpy_from_user_done: - sub r5, r4, r6 /* If done, return copied */ - -___strncpy_from_user_exit: - or r6, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * extern long __strnlen_user(const char *__s, long __n) - * - * Inputs: - * (r2) source address - * (r3) source size in bytes - * - * Ouputs: - * (r2) -EFAULT (in case of faulting) - * string length (otherwise) - */ - .global __strnlen_user -__strnlen_user: - pta ___strnlen_user_set_reply, tr0 - pta ___strnlen_user1, tr1 - or ZERO, ZERO, r5 /* r5 = counter */ - movi -(EFAULT), r6 /* r6 = reply, no real fixup */ - or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ - beq r3, ZERO, tr0 - -___strnlen_user1: - ldx.b r2, r5, r7 /* Fault address: only in reading */ - addi r3, -1, r3 /* No real fixup */ - addi r5, 1, r5 - beq r3, ZERO, tr0 - bne r7, ZERO, tr1 -! The line below used to be active. This meant led to a junk byte lying between each pair -! of entries in the argv & envp structures in memory. Whilst the program saw the right data -! via the argv and envp arguments to main, it meant the 'flat' representation visible through -! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example. -! addi r5, 1, r5 /* Include '\0' */ - -___strnlen_user_set_reply: - or r5, ZERO, r6 /* If done, return counter */ - -___strnlen_user_exit: - or r6, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * extern long __get_user_asm_?(void *val, long addr) - * - * Inputs: - * (r2) dest address - * (r3) source address (in User Space) - * - * Ouputs: - * (r2) -EFAULT (faulting) - * 0 (not faulting) - */ - .global __get_user_asm_b -__get_user_asm_b: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_b1: - ld.b r3, 0, r5 /* r5 = data */ - st.b r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_b_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __get_user_asm_w -__get_user_asm_w: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_w1: - ld.w r3, 0, r5 /* r5 = data */ - st.w r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_w_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __get_user_asm_l -__get_user_asm_l: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_l1: - ld.l r3, 0, r5 /* r5 = data */ - st.l r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_l_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __get_user_asm_q -__get_user_asm_q: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_q1: - ld.q r3, 0, r5 /* r5 = data */ - st.q r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_q_exit: - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * extern long __put_user_asm_?(void *pval, long addr) - * - * Inputs: - * (r2) kernel pointer to value - * (r3) dest address (in User Space) - * - * Ouputs: - * (r2) -EFAULT (faulting) - * 0 (not faulting) - */ - .global __put_user_asm_b -__put_user_asm_b: - ld.b r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_b1: - st.b r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_b_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __put_user_asm_w -__put_user_asm_w: - ld.w r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_w1: - st.w r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_w_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __put_user_asm_l -__put_user_asm_l: - ld.l r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_l1: - st.l r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_l_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __put_user_asm_q -__put_user_asm_q: - ld.q r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_q1: - st.q r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_q_exit: - ptabs LINK, tr0 - blink tr0, ZERO - -panic_stash_regs: - /* The idea is : when we get an unhandled panic, we dump the registers - to a known memory location, the just sit in a tight loop. - This allows the human to look at the memory region through the GDB - session (assuming the debug module's SHwy initiator isn't locked up - or anything), to hopefully analyze the cause of the panic. */ - - /* On entry, former r15 (SP) is in DCR - former r0 is at resvec_saved_area + 0 - former r1 is at resvec_saved_area + 8 - former tr0 is at resvec_saved_area + 32 - DCR is the only register whose value is lost altogether. - */ - - movi 0xffffffff80000000, r0 ! phy of dump area - ld.q SP, 0x000, r1 ! former r0 - st.q r0, 0x000, r1 - ld.q SP, 0x008, r1 ! former r1 - st.q r0, 0x008, r1 - st.q r0, 0x010, r2 - st.q r0, 0x018, r3 - st.q r0, 0x020, r4 - st.q r0, 0x028, r5 - st.q r0, 0x030, r6 - st.q r0, 0x038, r7 - st.q r0, 0x040, r8 - st.q r0, 0x048, r9 - st.q r0, 0x050, r10 - st.q r0, 0x058, r11 - st.q r0, 0x060, r12 - st.q r0, 0x068, r13 - st.q r0, 0x070, r14 - getcon dcr, r14 - st.q r0, 0x078, r14 - st.q r0, 0x080, r16 - st.q r0, 0x088, r17 - st.q r0, 0x090, r18 - st.q r0, 0x098, r19 - st.q r0, 0x0a0, r20 - st.q r0, 0x0a8, r21 - st.q r0, 0x0b0, r22 - st.q r0, 0x0b8, r23 - st.q r0, 0x0c0, r24 - st.q r0, 0x0c8, r25 - st.q r0, 0x0d0, r26 - st.q r0, 0x0d8, r27 - st.q r0, 0x0e0, r28 - st.q r0, 0x0e8, r29 - st.q r0, 0x0f0, r30 - st.q r0, 0x0f8, r31 - st.q r0, 0x100, r32 - st.q r0, 0x108, r33 - st.q r0, 0x110, r34 - st.q r0, 0x118, r35 - st.q r0, 0x120, r36 - st.q r0, 0x128, r37 - st.q r0, 0x130, r38 - st.q r0, 0x138, r39 - st.q r0, 0x140, r40 - st.q r0, 0x148, r41 - st.q r0, 0x150, r42 - st.q r0, 0x158, r43 - st.q r0, 0x160, r44 - st.q r0, 0x168, r45 - st.q r0, 0x170, r46 - st.q r0, 0x178, r47 - st.q r0, 0x180, r48 - st.q r0, 0x188, r49 - st.q r0, 0x190, r50 - st.q r0, 0x198, r51 - st.q r0, 0x1a0, r52 - st.q r0, 0x1a8, r53 - st.q r0, 0x1b0, r54 - st.q r0, 0x1b8, r55 - st.q r0, 0x1c0, r56 - st.q r0, 0x1c8, r57 - st.q r0, 0x1d0, r58 - st.q r0, 0x1d8, r59 - st.q r0, 0x1e0, r60 - st.q r0, 0x1e8, r61 - st.q r0, 0x1f0, r62 - st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake... - - ld.q SP, 0x020, r1 ! former tr0 - st.q r0, 0x200, r1 - gettr tr1, r1 - st.q r0, 0x208, r1 - gettr tr2, r1 - st.q r0, 0x210, r1 - gettr tr3, r1 - st.q r0, 0x218, r1 - gettr tr4, r1 - st.q r0, 0x220, r1 - gettr tr5, r1 - st.q r0, 0x228, r1 - gettr tr6, r1 - st.q r0, 0x230, r1 - gettr tr7, r1 - st.q r0, 0x238, r1 - - getcon sr, r1 - getcon ssr, r2 - getcon pssr, r3 - getcon spc, r4 - getcon pspc, r5 - getcon intevt, r6 - getcon expevt, r7 - getcon pexpevt, r8 - getcon tra, r9 - getcon tea, r10 - getcon kcr0, r11 - getcon kcr1, r12 - getcon vbr, r13 - getcon resvec, r14 - - st.q r0, 0x240, r1 - st.q r0, 0x248, r2 - st.q r0, 0x250, r3 - st.q r0, 0x258, r4 - st.q r0, 0x260, r5 - st.q r0, 0x268, r6 - st.q r0, 0x270, r7 - st.q r0, 0x278, r8 - st.q r0, 0x280, r9 - st.q r0, 0x288, r10 - st.q r0, 0x290, r11 - st.q r0, 0x298, r12 - st.q r0, 0x2a0, r13 - st.q r0, 0x2a8, r14 - - getcon SPC,r2 - getcon SSR,r3 - getcon EXPEVT,r4 - /* Prepare to jump to C - physical address */ - movi panic_handler-CONFIG_CACHED_MEMORY_OFFSET, r1 - ori r1, 1, r1 - ptabs r1, tr0 - getcon DCR, SP - blink tr0, ZERO - nop - nop - nop - nop - - - - -/* - * --- Signal Handling Section - */ - -/* - * extern long long _sa_default_rt_restorer - * extern long long _sa_default_restorer - * - * or, better, - * - * extern void _sa_default_rt_restorer(void) - * extern void _sa_default_restorer(void) - * - * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn() - * from user space. Copied into user space by signal management. - * Both must be quad aligned and 2 quad long (4 instructions). - * - */ - .balign 8 - .global sa_default_rt_restorer -sa_default_rt_restorer: - movi 0x10, r9 - shori __NR_rt_sigreturn, r9 - trapa r9 - nop - - .balign 8 - .global sa_default_restorer -sa_default_restorer: - movi 0x10, r9 - shori __NR_sigreturn, r9 - trapa r9 - nop - -/* - * --- __ex_table Section - */ - -/* - * User Access Exception Table. - */ - .section __ex_table, "a" - - .global asm_uaccess_start /* Just a marker */ -asm_uaccess_start: - - .long ___copy_user1, ___copy_user_exit - .long ___copy_user2, ___copy_user_exit - .long ___clear_user1, ___clear_user_exit - .long ___strncpy_from_user1, ___strncpy_from_user_exit - .long ___strnlen_user1, ___strnlen_user_exit - .long ___get_user_asm_b1, ___get_user_asm_b_exit - .long ___get_user_asm_w1, ___get_user_asm_w_exit - .long ___get_user_asm_l1, ___get_user_asm_l_exit - .long ___get_user_asm_q1, ___get_user_asm_q_exit - .long ___put_user_asm_b1, ___put_user_asm_b_exit - .long ___put_user_asm_w1, ___put_user_asm_w_exit - .long ___put_user_asm_l1, ___put_user_asm_l_exit - .long ___put_user_asm_q1, ___put_user_asm_q_exit - - .global asm_uaccess_end /* Just a marker */ -asm_uaccess_end: - - - - -/* - * --- .text.init Section - */ - - .section .text.init, "ax" - -/* - * void trap_init (void) - * - */ - .global trap_init -trap_init: - addi SP, -24, SP /* Room to save r28/r29/r30 */ - st.q SP, 0, r28 - st.q SP, 8, r29 - st.q SP, 16, r30 - - /* Set VBR and RESVEC */ - movi LVBR_block, r19 - andi r19, -4, r19 /* reset MMUOFF + reserved */ - /* For RESVEC exceptions we force the MMU off, which means we need the - physical address. */ - movi LRESVEC_block-CONFIG_CACHED_MEMORY_OFFSET, r20 - andi r20, -4, r20 /* reset reserved */ - ori r20, 1, r20 /* set MMUOFF */ - putcon r19, VBR - putcon r20, RESVEC - - /* Sanity check */ - movi LVBR_block_end, r21 - andi r21, -4, r21 - movi BLOCK_SIZE, r29 /* r29 = expected size */ - or r19, ZERO, r30 - add r19, r29, r19 - - /* - * Ugly, but better loop forever now than crash afterwards. - * We should print a message, but if we touch LVBR or - * LRESVEC blocks we should not be surprised if we get stuck - * in trap_init(). - */ - pta trap_init_loop, tr1 - gettr tr1, r28 /* r28 = trap_init_loop */ - sub r21, r30, r30 /* r30 = actual size */ - - /* - * VBR/RESVEC handlers overlap by being bigger than - * allowed. Very bad. Just loop forever. - * (r28) panic/loop address - * (r29) expected size - * (r30) actual size - */ -trap_init_loop: - bne r19, r21, tr1 - - /* Now that exception vectors are set up reset SR.BL */ - getcon SR, r22 - movi SR_UNBLOCK_EXC, r23 - and r22, r23, r22 - putcon r22, SR - - addi SP, 24, SP - ptabs LINK, tr0 - blink tr0, ZERO - diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 76c4dc7021c..f3bd82e9589 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -3,6 +3,8 @@ #include +#ifndef __ASSEMBLY__ + /* * CPU type and hardware bug flags. Kept separately for each CPU. * @@ -40,11 +42,8 @@ enum cpu_type { CPU_SH_NONE }; -#ifdef CONFIG_SUPERH32 -# include "processor_32.h" -#else -# include "processor_64.h" -#endif +/* Forward decl */ +struct sh_cpuinfo; /* arch/sh/kernel/setup.c */ const char *get_cpu_subtype(struct sh_cpuinfo *c); @@ -55,4 +54,12 @@ int vsyscall_init(void); #define vsyscall_init() do { } while (0) #endif +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_SUPERH32 +# include "processor_32.h" +#else +# include "processor_64.h" +#endif + #endif /* __ASM_SH_PROCESSOR_H */ -- cgit v1.2.3-70-g09d2 From 249cfea914002baac0af4b080306e6b820cd86b2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 Nov 2007 18:26:19 +0900 Subject: sh: Split out pgtable.h in to _32 and _64 variants. Signed-off-by: Paul Mundt --- arch/sh/mm/ioremap_64.c | 40 ++-- include/asm-sh/page.h | 10 +- include/asm-sh/pgtable.h | 491 +------------------------------------------ include/asm-sh/pgtable_32.h | 473 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/pgtable_64.h | 300 +++++++++++++++++++++++++++ include/asm-sh64/pgtable.h | 496 -------------------------------------------- 6 files changed, 820 insertions(+), 990 deletions(-) create mode 100644 include/asm-sh/pgtable_32.h create mode 100644 include/asm-sh/pgtable_64.h delete mode 100644 include/asm-sh64/pgtable.h (limited to 'include') diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index 95462a0f312..e27d1651923 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -1,23 +1,24 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/mm/ioremap.c + * arch/sh/mm/ioremap_64.c * * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003 - 2007 Paul Mundt * * Mostly derived from arch/sh/mm/ioremap.c which, in turn is mostly * derived from arch/i386/mm/ioremap.c . * * (C) Copyright 1995 1996 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include #include #include #include +#include #include #include #include @@ -42,7 +43,8 @@ static unsigned long shmedia_ioremap(struct resource *, u32, int); * have to convert them into an offset in a page-aligned mapping, but the * caller shouldn't need to know that small detail. */ -void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +void *__ioremap(unsigned long phys_addr, unsigned long size, + unsigned long flags) { void * addr; struct vm_struct * area; @@ -83,7 +85,7 @@ void * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flag } EXPORT_SYMBOL(__ioremap); -void iounmap(void *addr) +void __iounmap(void *addr) { struct vm_struct *area; @@ -96,7 +98,7 @@ void iounmap(void *addr) kfree(area); } -EXPORT_SYMBOL(iounmap); +EXPORT_SYMBOL(__iounmap); static struct resource shmedia_iomap = { .name = "shmedia_iomap", @@ -265,6 +267,7 @@ static __init_refok void *sh64_get_page(void) static void shmedia_mapioaddr(unsigned long pa, unsigned long va) { pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep, pte; pgprot_t prot; @@ -274,11 +277,17 @@ static void shmedia_mapioaddr(unsigned long pa, unsigned long va) pgdp = pgd_offset_k(va); if (pgd_none(*pgdp) || !pgd_present(*pgdp)) { + pudp = (pud_t *)sh64_get_page(); + set_pgd(pgdp, __pgd((unsigned long)pudp | _KERNPG_TABLE)); + } + + pudp = pud_offset(pgdp, va); + if (pud_none(*pudp) || !pud_present(*pudp)) { pmdp = (pmd_t *)sh64_get_page(); - set_pgd(pgdp, __pgd((unsigned long)pmdp | _KERNPG_TABLE)); + set_pud(pudp, __pud((unsigned long)pmdp | _KERNPG_TABLE)); } - pmdp = pmd_offset(pgdp, va); + pmdp = pmd_offset(pudp, va); if (pmd_none(*pmdp) || !pmd_present(*pmdp) ) { ptep = (pte_t *)sh64_get_page(); set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE)); @@ -302,12 +311,19 @@ static void shmedia_mapioaddr(unsigned long pa, unsigned long va) static void shmedia_unmapioaddr(unsigned long vaddr) { pgd_t *pgdp; + pud_t *pudp; pmd_t *pmdp; pte_t *ptep; pgdp = pgd_offset_k(vaddr); - pmdp = pmd_offset(pgdp, vaddr); + if (pgd_none(*pgdp) || pgd_bad(*pgdp)) + return; + + pudp = pud_offset(pgdp, vaddr); + if (pud_none(*pudp) || pud_bad(*pudp)) + return; + pmdp = pmd_offset(pudp, vaddr); if (pmd_none(*pmdp) || pmd_bad(*pmdp)) return; diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index d0273dbce6b..93a89841227 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -96,12 +96,18 @@ typedef struct { unsigned long long pgd; } pgd_t; ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) #define __pte(x) \ ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) -#else +#elif defined(CONFIG_SUPERH32) typedef struct { unsigned long pte_low; } pte_t; typedef struct { unsigned long pgprot; } pgprot_t; typedef struct { unsigned long pgd; } pgd_t; #define pte_val(x) ((x).pte_low) -#define __pte(x) ((pte_t) { (x) } ) +#define __pte(x) ((pte_t) { (x) } ) +#else +typedef struct { unsigned long long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) #endif #define pgd_val(x) ((x).pgd) diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index b0bb76a6864..5a800c69e04 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -3,7 +3,7 @@ * use the SuperH page table tree. * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002 - 2005 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -78,278 +78,12 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #endif #define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) -/* - * Linux PTEL encoding. - * - * Hardware and software bit definitions for the PTEL value (see below for - * notes on SH-X2 MMUs and 64-bit PTEs): - * - * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). - * - * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the - * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, - * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). - * - * In order to keep this relatively clean, do not use these for defining - * SH-3 specific flags until all of the other unused bits have been - * exhausted. - * - * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. - * - * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. - * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. - * - * - Bits 31, 30, and 29 remain unused by everyone and can be used for future - * software flags, although care must be taken to update _PAGE_CLEAR_FLAGS. - * - * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. - * - * SH-X2 MMUs and extended PTEs - * - * SH-X2 supports an extended mode TLB with split data arrays due to the - * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and - * SZ bit placeholders still exist in data array 1, but are implemented as - * reserved bits, with the real logic existing in data array 2. - * - * The downside to this is that we can no longer fit everything in to a 32-bit - * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus - * side, this gives us quite a few spare bits to play with for future usage. - */ -/* Legacy and compat mode bits */ -#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ -#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ -#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ -#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ -#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ -#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ -#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ -#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ -#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ -#define _PAGE_PROTNONE 0x200 /* software: if not present */ -#define _PAGE_ACCESSED 0x400 /* software: page referenced */ -#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ - -#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) -#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) - -/* Extended mode bits */ -#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ -#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ -#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ -#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ - -#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ -#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ -#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ - -#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ -#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ -#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ - -/* Wrapper for extended mode pgprot twiddling */ -#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) - -/* software: moves to PTEA.TC (Timing Control) */ -#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ -#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ - -/* software: moves to PTEA.SA[2:0] (Space Attributes) */ -#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ -#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ -#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ -#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ -#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ -#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ -#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ - -/* Mask which drops unused bits from the PTEL value */ -#if defined(CONFIG_CPU_SH3) -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ - _PAGE_FILE | _PAGE_SZ1 | \ - _PAGE_HW_SHARED) -#elif defined(CONFIG_X2TLB) -/* Get rid of the legacy PR/SZ bits when using extended mode */ -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ - _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) -#else -#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) -#endif - -#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS)) - -/* Hardware flags, page size encoding */ -#if defined(CONFIG_X2TLB) -# if defined(CONFIG_PAGE_SIZE_4KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) -# elif defined(CONFIG_PAGE_SIZE_8KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) -# elif defined(CONFIG_PAGE_SIZE_64KB) -# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) -# endif -#else -# if defined(CONFIG_PAGE_SIZE_4KB) -# define _PAGE_FLAGS_HARD _PAGE_SZ0 -# elif defined(CONFIG_PAGE_SIZE_64KB) -# define _PAGE_FLAGS_HARD _PAGE_SZ1 -# endif -#endif - -#if defined(CONFIG_X2TLB) -# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) -# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) -# endif +#if defined(CONFIG_SUPERH32) +#include #else -# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -# define _PAGE_SZHUGE (_PAGE_SZ1) -# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) -# endif -#endif - -/* - * Stub out _PAGE_SZHUGE if we don't have a good definition for it, - * to make pte_mkhuge() happy. - */ -#ifndef _PAGE_SZHUGE -# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) -#endif - -#define _PAGE_CHG_MASK \ - (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) - -#ifndef __ASSEMBLY__ - -#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_WRITE)) - -#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ - _PAGE_EXT_KERN_READ | \ - _PAGE_EXT_USER_EXEC | \ - _PAGE_EXT_USER_READ)) - -#define PAGE_COPY PAGE_EXECREAD - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_USER_READ)) - -#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_USER_WRITE)) - -#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC | \ - _PAGE_EXT_USER_WRITE | \ - _PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_EXEC)) - -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_HW_SHARED | \ - _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC)) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ - _PAGE_EXT_KERN_EXEC) \ - (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ - (type)) - -#elif defined(CONFIG_MMU) /* SH-X TLB */ -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | \ - _PAGE_FLAGS_HARD) - -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD) - -#define PAGE_EXECREAD PAGE_READONLY -#define PAGE_RWX PAGE_SHARED -#define PAGE_WRITEONLY PAGE_SHARED - -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_HW_SHARED | \ - _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ - _PAGE_DIRTY | _PAGE_ACCESSED | \ - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ - _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ - (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ - (type)) -#else /* no mmu */ -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_EXECREAD __pgprot(0) -#define PAGE_RWX __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_WRITEONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) -#define PAGE_KERNEL_NOCACHE __pgprot(0) -#define PAGE_KERNEL_RO __pgprot(0) - -#define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(0) +#include #endif -#endif /* __ASSEMBLY__ */ - /* * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page * protection for execute, and considers it the same as a read. Also, write @@ -378,208 +112,6 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define __S110 PAGE_RWX #define __S111 PAGE_RWX -#ifndef __ASSEMBLY__ - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#ifdef CONFIG_X2TLB -static inline void set_pte(pte_t *ptep, pte_t pte) -{ - ptep->pte_high = pte.pte_high; - smp_wmb(); - ptep->pte_low = pte.pte_low; -} -#else -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#endif - -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) - -#define pfn_pte(pfn, prot) \ - __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) \ - __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define pte_none(x) (!pte_val(x)) -#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) - -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x)) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) - -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) -#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) -#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) -#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) - -#ifdef CONFIG_X2TLB -#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) -#else -#define pte_write(pte) ((pte).pte_low & _PAGE_RW) -#endif - -#define PTE_BIT_FUNC(h,fn,op) \ -static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } - -#ifdef CONFIG_X2TLB -/* - * We cheat a bit in the SH-X2 TLB case. As the permission bits are - * individually toggled (and user permissions are entirely decoupled from - * kernel permissions), we attempt to couple them a bit more sanely here. - */ -PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); -PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); -PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); -#else -PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); -PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); -PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); -#endif - -PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); -PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); -PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); -PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); - -/* - * Macro and implementation to make a page protection as uncachable. - */ -#define pgprot_writecombine(prot) \ - __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -#define pgprot_noncached pgprot_writecombine - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte.pte_low &= _PAGE_CHG_MASK; - pte.pte_low |= pgprot_val(newprot); - -#ifdef CONFIG_X2TLB - pte.pte_high |= pgprot_val(newprot) >> 32; -#endif - - return pte; -} - -#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) -#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) -#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) -#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) - -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -#ifdef CONFIG_X2TLB -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ - &(e), (e).pte_high, (e).pte_low) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) -#else -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) -#endif - -struct vm_area_struct; -extern void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte); - -/* - * Encode and de-code a swap entry - * - * Constraints: - * _PAGE_FILE at bit 0 - * _PAGE_PRESENT at bit 8 - * _PAGE_PROTNONE at bit 9 - * - * For the normal case, we encode the swap type into bits 0:7 and the - * swap offset into bits 10:30. For the 64-bit PTE case, we keep the - * preserved bits in the low 32-bits and use the upper 32 as the swap - * offset (along with a 5-bit type), following the same approach as x86 - * PAE. This keeps the logic quite simple, and allows for a full 32 - * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with - * in the pte_low case. - * - * As is evident by the Alpha code, if we ever get a 64-bit unsigned - * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes - * much cleaner.. - * - * NOTE: We should set ZEROs at the position of _PAGE_PRESENT - * and _PAGE_PROTNONE bits - */ -#ifdef CONFIG_X2TLB -#define __swp_type(x) ((x).val & 0x1f) -#define __swp_offset(x) ((x).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) -#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) -#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) - -/* - * Encode and decode a nonlinear file mapping entry - */ -#define pte_to_pgoff(pte) ((pte).pte_high) -#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) - -#define PTE_FILE_MAX_BITS 32 -#else -#define __swp_type(x) ((x).val & 0xff) -#define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) - -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) - -/* - * Encode and decode a nonlinear file mapping entry - */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 1) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) -#endif - typedef pte_t *pte_addr_t; #define kern_addr_valid(addr) (1) @@ -587,27 +119,26 @@ typedef pte_t *pte_addr_t; #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) -struct mm_struct; +#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) /* * No page table caches to initialise */ #define pgtable_cache_init() do { } while (0) -#ifndef CONFIG_MMU -extern unsigned int kobjsize(const void *objp); -#endif /* !CONFIG_MMU */ - #if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ defined(CONFIG_SH7705_CACHE_32KB)) +struct mm_struct; #define __HAVE_ARCH_PTEP_GET_AND_CLEAR -extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); #endif +struct vm_area_struct; +extern void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte); extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; extern void paging_init(void); #include -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_SH_PAGE_H */ +#endif /* __ASM_SH_PGTABLE_H */ diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h new file mode 100644 index 00000000000..70303603e89 --- /dev/null +++ b/include/asm-sh/pgtable_32.h @@ -0,0 +1,473 @@ +#ifndef __ASM_SH_PGTABLE_32_H +#define __ASM_SH_PGTABLE_32_H + +/* + * Linux PTEL encoding. + * + * Hardware and software bit definitions for the PTEL value (see below for + * notes on SH-X2 MMUs and 64-bit PTEs): + * + * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). + * + * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the + * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, + * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). + * + * In order to keep this relatively clean, do not use these for defining + * SH-3 specific flags until all of the other unused bits have been + * exhausted. + * + * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. + * + * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. + * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. + * + * - Bits 31, 30, and 29 remain unused by everyone and can be used for future + * software flags, although care must be taken to update _PAGE_CLEAR_FLAGS. + * + * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. + * + * SH-X2 MMUs and extended PTEs + * + * SH-X2 supports an extended mode TLB with split data arrays due to the + * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and + * SZ bit placeholders still exist in data array 1, but are implemented as + * reserved bits, with the real logic existing in data array 2. + * + * The downside to this is that we can no longer fit everything in to a 32-bit + * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus + * side, this gives us quite a few spare bits to play with for future usage. + */ +/* Legacy and compat mode bits */ +#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ +#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ +#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ +#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ +#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ +#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ +#define _PAGE_PROTNONE 0x200 /* software: if not present */ +#define _PAGE_ACCESSED 0x400 /* software: page referenced */ +#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ + +#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) +#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) + +/* Extended mode bits */ +#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ +#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ +#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ +#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ + +#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ +#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ +#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ + +#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ +#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ +#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ + +/* Wrapper for extended mode pgprot twiddling */ +#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) + +/* software: moves to PTEA.TC (Timing Control) */ +#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ +#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ + +/* software: moves to PTEA.SA[2:0] (Space Attributes) */ +#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ +#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ +#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ +#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ +#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ +#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ +#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ + +/* Mask which drops unused bits from the PTEL value */ +#if defined(CONFIG_CPU_SH3) +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ + _PAGE_FILE | _PAGE_SZ1 | \ + _PAGE_HW_SHARED) +#elif defined(CONFIG_X2TLB) +/* Get rid of the legacy PR/SZ bits when using extended mode */ +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ + _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) +#else +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) +#endif + +#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS)) + +/* Hardware flags, page size encoding */ +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) +# elif defined(CONFIG_PAGE_SIZE_8KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) +# endif +#else +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ0 +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ1 +# endif +#endif + +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) +# endif +#else +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_SZ1) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) +# endif +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) +#endif + +#define _PAGE_CHG_MASK \ + (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) + +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_EXEC | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_USER_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_EXEC)) + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC) \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) + +#elif defined(CONFIG_MMU) /* SH-X TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_EXECREAD PAGE_READONLY +#define PAGE_RWX PAGE_SHARED +#define PAGE_WRITEONLY PAGE_SHARED + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) +#else /* no mmu */ +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_EXECREAD __pgprot(0) +#define PAGE_RWX __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_WRITEONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) +#define PAGE_KERNEL_NOCACHE __pgprot(0) +#define PAGE_KERNEL_RO __pgprot(0) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#ifdef CONFIG_X2TLB +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; +} +#else +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#endif + +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define pfn_pte(pfn, prot) \ + __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) \ + __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) + +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) +#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) +#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) +#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) + +#ifdef CONFIG_X2TLB +#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) +#else +#define pte_write(pte) ((pte).pte_low & _PAGE_RW) +#endif + +#define PTE_BIT_FUNC(h,fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } + +#ifdef CONFIG_X2TLB +/* + * We cheat a bit in the SH-X2 TLB case. As the permission bits are + * individually toggled (and user permissions are entirely decoupled from + * kernel permissions), we attempt to couple them a bit more sanely here. + */ +PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); +PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); +PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); +#else +PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); +PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); +PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); +#endif + +PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); + +/* + * Macro and implementation to make a page protection as uncachable. + */ +#define pgprot_writecombine(prot) \ + __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +#define pgprot_noncached pgprot_writecombine + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_low |= pgprot_val(newprot); + +#ifdef CONFIG_X2TLB + pte.pte_high |= pgprot_val(newprot) >> 32; +#endif + + return pte; +} + +#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) + +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifdef CONFIG_X2TLB +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ + &(e), (e).pte_high, (e).pte_low) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) +#else +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +#endif + +/* + * Encode and de-code a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_PRESENT at bit 8 + * _PAGE_PROTNONE at bit 9 + * + * For the normal case, we encode the swap type into bits 0:7 and the + * swap offset into bits 10:30. For the 64-bit PTE case, we keep the + * preserved bits in the low 32-bits and use the upper 32 as the swap + * offset (along with a 5-bit type), following the same approach as x86 + * PAE. This keeps the logic quite simple, and allows for a full 32 + * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with + * in the pte_low case. + * + * As is evident by the Alpha code, if we ever get a 64-bit unsigned + * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes + * much cleaner.. + * + * NOTE: We should set ZEROs at the position of _PAGE_PRESENT + * and _PAGE_PROTNONE bits + */ +#ifdef CONFIG_X2TLB +#define __swp_type(x) ((x).val & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) + +#define PTE_FILE_MAX_BITS 32 +#else +#define __swp_type(x) ((x).val & 0xff) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 1) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/include/asm-sh/pgtable_64.h b/include/asm-sh/pgtable_64.h new file mode 100644 index 00000000000..d422111006f --- /dev/null +++ b/include/asm-sh/pgtable_64.h @@ -0,0 +1,300 @@ +#ifndef __ASM_SH64_PGTABLE_H +#define __ASM_SH64_PGTABLE_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/pgtable.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file contains the functions and defines necessary to modify and use + * the SuperH page table tree. + */ + +#include +#include +#include + +/* + * Error outputs. + */ +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Table setting routines. Used within arch/mm only. + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) +{ + unsigned long long x = ((unsigned long long) pteval.pte_low); + unsigned long long *xp = (unsigned long long *) pteptr; + /* + * Sign-extend based on NPHYS. + */ + *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; +} +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep) +{ + pmd_val(*pmdp) = (unsigned long) ptep; +} + +/* + * PGD defines. Top level. + */ + +/* To find an entry in a generic PGD. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define __pgd_offset(address) pgd_index(address) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* To find an entry in a kernel PGD. */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * PMD level access routines. Same notes as above. + */ +#define _PMD_EMPTY 0x0 +/* Either the PMD is empty or present, it's not paged out */ +#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) +#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) +#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) +#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) + +#define pmd_page_vaddr(pmd_entry) \ + ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) + +#define pmd_page(pmd) \ + (virt_to_page(pmd_val(pmd))) + +/* PMD to PTE dereferencing */ +#define pte_index(address) \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +#define pte_offset_kernel(dir, addr) \ + ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) + +#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifndef __ASSEMBLY__ +#define IOBASE_VADDR 0xff000000 +#define IOBASE_END 0xffffffff + +/* + * PTEL coherent flags. + * See Chapter 17 ST50 CPU Core Volume 1, Architecture. + */ +/* The bits that are required in the SH-5 TLB are placed in the h/w-defined + positions, to avoid expensive bit shuffling on every refill. The remaining + bits are used for s/w purposes and masked out on each refill. + + Note, the PTE slots are used to hold data of type swp_entry_t when a page is + swapped out. Only the _PAGE_PRESENT flag is significant when the page is + swapped out, and it must be placed so that it doesn't overlap either the + type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type + at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This + scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit + [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split + into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ +#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ +#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ +#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ +#define _PAGE_PRESENT 0x004 /* software: page referenced */ +#define _PAGE_FILE 0x004 /* software: only when !present */ +#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ +#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ +#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ +#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ +#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ +#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ +#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ +#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ +#define _PAGE_ACCESSED 0x800 /* software: page referenced */ + +/* Mask which drops software flags */ +#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL + +/* + * HugeTLB support + */ +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define _PAGE_SZHUGE (_PAGE_SIZE0) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define _PAGE_SZHUGE (_PAGE_SIZE1) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) +#endif + +/* + * Default flags for a Kernel page. + * This is fundametally also SHARED because the main use of this define + * (other than for PGD/PMD entries) is for the VMALLOC pool which is + * contextless. + * + * _PAGE_EXECUTE is required for modules + * + */ +#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_SHARED) + +/* Default flags for a User page */ +#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) + +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +/* + * We have full permissions (Read/Write/Execute/Shared). + */ +#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_SHARED) +#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) + +/* + * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default + * protection mode for the stack. + */ +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) +#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) +#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ + _PAGE_WRITE | _PAGE_EXECUTE) +#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) + +/* Make it a device mapping for maximum safety (e.g. for mapping device + registers into user-space via /dev/map). */ +#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) +#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +/* + * Handling allocation failures during page table setup. + */ +extern void __handle_bad_pmd_kernel(pmd_t * pmd); +#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) + +/* + * PTE level access routines. + * + * Note1: + * It's the tree walk leaf. This is physical address to be stored. + * + * Note 2: + * Regarding the choice of _PTE_EMPTY: + + We must choose a bit pattern that cannot be valid, whether or not the page + is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped + out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is + left for us to select. If we force bit[7]==0 when swapped out, we could use + the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if + we force bit[7]==1 when swapped out, we can use all zeroes to indicate + empty. This is convenient, because the page tables get cleared to zero + when they are allocated. + + */ +#define _PTE_EMPTY 0x0 +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) +#define pte_none(x) (pte_val(x) == _PTE_EMPTY) + +/* + * Some definitions to translate between mem_map, PTEs, and page + * addresses: + */ + +/* + * Given a PTE, return the index of the mem_map[] entry corresponding + * to the page frame the PTE. Get the absolute physical address, make + * a relative physical address and translate it to an index. + */ +#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ + __MEMORY_START) >> PAGE_SHIFT) + +/* + * Given a PTE, return the "struct page *". + */ +#define pte_page(x) (mem_map + pte_pagenr(x)) + +/* + * Return number of (down rounded) MB corresponding to x pages. + */ +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + + +/* + * The following have defined behavior only work if pte_present() is true. + */ +static inline int pte_dirty(pte_t pte){ return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte){ return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_write(pte_t pte){ return pte_val(pte) & _PAGE_WRITE; } + +static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } + + +/* + * Conversion functions: convert a page and protection to a page entry. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page,pgprot) \ +({ \ + pte_t __pte; \ + \ + set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ + __MEMORY_START | pgprot_val((pgprot)))); \ + __pte; \ +}) + +/* + * This takes a (absolute) physical page address that is used + * by the remapping functions + */ +#define mk_pte_phys(physpage, pgprot) \ +({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } + +/* Encode and decode a swap entry */ +#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* Encode and decode a nonlinear file mapping entry */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte)) +#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) + +#endif /* !__ASSEMBLY__ */ + +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#endif /* __ASM_SH64_PGTABLE_H */ diff --git a/include/asm-sh64/pgtable.h b/include/asm-sh64/pgtable.h deleted file mode 100644 index 3488fe32e43..00000000000 --- a/include/asm-sh64/pgtable.h +++ /dev/null @@ -1,496 +0,0 @@ -#ifndef __ASM_SH64_PGTABLE_H -#define __ASM_SH64_PGTABLE_H - -#include - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/pgtable.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - * This file contains the functions and defines necessary to modify and use - * the SuperH page table tree. - */ - -#ifndef __ASSEMBLY__ -#include -#include -#include - -struct vm_area_struct; - -extern void paging_init(void); - -/* We provide our own get_unmapped_area to avoid cache synonym issue */ -#define HAVE_ARCH_UNMAPPED_AREA - -/* - * Basically we have the same two-level (which is the logical three level - * Linux page table layout folded) page tables as the i386. - */ - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned char empty_zero_page[PAGE_SIZE]; -#define ZERO_PAGE(vaddr) (mem_map + MAP_NR(empty_zero_page)) - -#endif /* !__ASSEMBLY__ */ - -/* - * NEFF and NPHYS related defines. - * FIXME : These need to be model-dependent. For now this is OK, SH5-101 and SH5-103 - * implement 32 bits effective and 32 bits physical. But future implementations may - * extend beyond this. - */ -#define NEFF 32 -#define NEFF_SIGN (1LL << (NEFF - 1)) -#define NEFF_MASK (-1LL << NEFF) - -#define NPHYS 32 -#define NPHYS_SIGN (1LL << (NPHYS - 1)) -#define NPHYS_MASK (-1LL << NPHYS) - -/* Typically 2-level is sufficient up to 32 bits of virtual address space, beyond - that 3-level would be appropriate. */ -#if defined(CONFIG_SH64_PGTABLE_2_LEVEL) -/* For 4k pages, this contains 512 entries, i.e. 9 bits worth of address. */ -#define PTRS_PER_PTE ((1<> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define __pgd_offset(address) pgd_index(address) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* To find an entry in a kernel PGD. */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * PGD level access routines. - * - * Note1: - * There's no need to use physical addresses since the tree walk is all - * in performed in software, until the PTE translation. - * - * Note 2: - * A PGD entry can be uninitialized (_PGD_UNUSED), generically bad, - * clear (_PGD_EMPTY), present. When present, lower 3 nibbles contain - * _KERNPG_TABLE. Being a kernel virtual pointer also bit 31 must - * be 1. Assuming an arbitrary clear value of bit 31 set to 0 and - * lower 3 nibbles set to 0xFFF (_PGD_EMPTY) any other value is a - * bad pgd that must be notified via printk(). - * - */ -#define _PGD_EMPTY 0x0 - -#if defined(CONFIG_SH64_PGTABLE_2_LEVEL) -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -#define pgd_present(pgd) ((pgd_val(pgd) & _PAGE_PRESENT) ? 1 : 0) -#define pgd_clear(xx) do { } while(0) - -#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL) -#define pgd_present(pgd_entry) (1) -#define pgd_none(pgd_entry) (pgd_val((pgd_entry)) == _PGD_EMPTY) -/* TODO: Think later about what a useful definition of 'bad' would be now. */ -#define pgd_bad(pgd_entry) (0) -#define pgd_clear(pgd_entry_p) (set_pgd((pgd_entry_p), __pgd(_PGD_EMPTY))) - -#endif - - -#define pgd_page_vaddr(pgd_entry) ((unsigned long) (pgd_val(pgd_entry) & PAGE_MASK)) -#define pgd_page(pgd) (virt_to_page(pgd_val(pgd))) - - -/* - * PMD defines. Middle level. - */ - -/* PGD to PMD dereferencing */ -#if defined(CONFIG_SH64_PGTABLE_2_LEVEL) -static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) -{ - return (pmd_t *) dir; -} -#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL) -#define __pmd_offset(address) \ - (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) -#define pmd_offset(dir, addr) \ - ((pmd_t *) ((pgd_val(*(dir))) & PAGE_MASK) + __pmd_offset((addr))) -#endif - -/* - * PMD level access routines. Same notes as above. - */ -#define _PMD_EMPTY 0x0 -/* Either the PMD is empty or present, it's not paged out */ -#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) -#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) -#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) -#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) - -#define pmd_page_vaddr(pmd_entry) \ - ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) - -#define pmd_page(pmd) \ - (virt_to_page(pmd_val(pmd))) - -/* PMD to PTE dereferencing */ -#define pte_index(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) - -#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) -#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) -#define pte_unmap(pte) do { } while (0) -#define pte_unmap_nested(pte) do { } while (0) - -/* Round it up ! */ -#define USER_PTRS_PER_PGD ((TASK_SIZE+PGDIR_SIZE-1)/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#ifndef __ASSEMBLY__ -#define VMALLOC_END 0xff000000 -#define VMALLOC_START 0xf0000000 -#define VMALLOC_VMADDR(x) ((unsigned long)(x)) - -#define IOBASE_VADDR 0xff000000 -#define IOBASE_END 0xffffffff - -/* - * PTEL coherent flags. - * See Chapter 17 ST50 CPU Core Volume 1, Architecture. - */ -/* The bits that are required in the SH-5 TLB are placed in the h/w-defined - positions, to avoid expensive bit shuffling on every refill. The remaining - bits are used for s/w purposes and masked out on each refill. - - Note, the PTE slots are used to hold data of type swp_entry_t when a page is - swapped out. Only the _PAGE_PRESENT flag is significant when the page is - swapped out, and it must be placed so that it doesn't overlap either the - type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type - at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This - scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit - [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split - into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ -#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ -#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ -#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ -#define _PAGE_PRESENT 0x004 /* software: page referenced */ -#define _PAGE_FILE 0x004 /* software: only when !present */ -#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ -#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ -#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ -#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ -#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ -#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ -#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ -#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ -#define _PAGE_ACCESSED 0x800 /* software: page referenced */ - -/* Mask which drops software flags */ -#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL - -/* - * HugeTLB support - */ -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE (_PAGE_SIZE0) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define _PAGE_SZHUGE (_PAGE_SIZE1) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) -#endif - -/* - * Default flags for a Kernel page. - * This is fundametally also SHARED because the main use of this define - * (other than for PGD/PMD entries) is for the VMALLOC pool which is - * contextless. - * - * _PAGE_EXECUTE is required for modules - * - */ -#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SHARED) - -/* Default flags for a User page */ -#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) - -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_USER | \ - _PAGE_SHARED) -/* We need to include PAGE_EXECUTE in PAGE_COPY because it is the default - * protection mode for the stack. */ -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_USER | _PAGE_EXECUTE) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHABLE | \ - _PAGE_ACCESSED | _PAGE_USER) -#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) - - -/* - * In ST50 we have full permissions (Read/Write/Execute/Shared). - * Just match'em all. These are for mmap(), therefore all at least - * User/Cachable/Present/Accessed. No point in making Fault on Write. - */ -#define __MMAP_COMMON (_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED) - /* sxwr */ -#define __P000 __pgprot(__MMAP_COMMON) -#define __P001 __pgprot(__MMAP_COMMON | _PAGE_READ) -#define __P010 __pgprot(__MMAP_COMMON) -#define __P011 __pgprot(__MMAP_COMMON | _PAGE_READ) -#define __P100 __pgprot(__MMAP_COMMON | _PAGE_EXECUTE) -#define __P101 __pgprot(__MMAP_COMMON | _PAGE_EXECUTE | _PAGE_READ) -#define __P110 __pgprot(__MMAP_COMMON | _PAGE_EXECUTE) -#define __P111 __pgprot(__MMAP_COMMON | _PAGE_EXECUTE | _PAGE_READ) - -#define __S000 __pgprot(__MMAP_COMMON | _PAGE_SHARED) -#define __S001 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_READ) -#define __S010 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_WRITE) -#define __S011 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_READ | _PAGE_WRITE) -#define __S100 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE) -#define __S101 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE | _PAGE_READ) -#define __S110 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE | _PAGE_WRITE) -#define __S111 __pgprot(__MMAP_COMMON | _PAGE_SHARED | _PAGE_EXECUTE | _PAGE_READ | _PAGE_WRITE) - -/* Make it a device mapping for maximum safety (e.g. for mapping device - registers into user-space via /dev/map). */ -#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -/* - * Handling allocation failures during page table setup. - */ -extern void __handle_bad_pmd_kernel(pmd_t * pmd); -#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) - -/* - * PTE level access routines. - * - * Note1: - * It's the tree walk leaf. This is physical address to be stored. - * - * Note 2: - * Regarding the choice of _PTE_EMPTY: - - We must choose a bit pattern that cannot be valid, whether or not the page - is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped - out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is - left for us to select. If we force bit[7]==0 when swapped out, we could use - the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if - we force bit[7]==1 when swapped out, we can use all zeroes to indicate - empty. This is convenient, because the page tables get cleared to zero - when they are allocated. - - */ -#define _PTE_EMPTY 0x0 -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) -#define pte_none(x) (pte_val(x) == _PTE_EMPTY) - -/* - * Some definitions to translate between mem_map, PTEs, and page - * addresses: - */ - -/* - * Given a PTE, return the index of the mem_map[] entry corresponding - * to the page frame the PTE. Get the absolute physical address, make - * a relative physical address and translate it to an index. - */ -#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ - __MEMORY_START) >> PAGE_SHIFT) - -/* - * Given a PTE, return the "struct page *". - */ -#define pte_page(x) (mem_map + pte_pagenr(x)) - -/* - * Return number of (down rounded) MB corresponding to x pages. - */ -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - - -/* - * The following have defined behavior only work if pte_present() is true. - */ -static inline int pte_dirty(pte_t pte){ return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte){ return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_write(pte_t pte){ return pte_val(pte) & _PAGE_WRITE; } - -static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } - - -/* - * Conversion functions: convert a page and protection to a page entry. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page,pgprot) \ -({ \ - pte_t __pte; \ - \ - set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ - __MEMORY_START | pgprot_val((pgprot)))); \ - __pte; \ -}) - -/* - * This takes a (absolute) physical page address that is used - * by the remapping functions - */ -#define mk_pte_phys(physpage, pgprot) \ -({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } - -typedef pte_t *pte_addr_t; -#define pgtable_cache_init() do { } while (0) - -extern void update_mmu_cache(struct vm_area_struct * vma, - unsigned long address, pte_t pte); - -/* Encode and decode a swap entry */ -#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte)) -#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define PageSkip(page) (0) -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#endif /* !__ASSEMBLY__ */ - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#define pte_pfn(x) (((unsigned long)((x).pte)) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -#include - -#endif /* __ASM_SH64_PGTABLE_H */ -- cgit v1.2.3-70-g09d2 From 99432700cf2f28976191ab546deffc0007ef4eb7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 20 Nov 2007 14:49:36 +0900 Subject: sh: Tidy up lib64 udelay impl. Signed-off-by: Paul Mundt --- arch/sh/lib64/udelay.c | 7 ++----- include/asm-sh/delay.h | 8 ++++++-- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c index 32765391400..4c71a7428e6 100644 --- a/arch/sh/lib64/udelay.c +++ b/arch/sh/lib64/udelay.c @@ -13,8 +13,6 @@ #include #include -extern unsigned long loops_per_jiffy; - /* * Use only for very small delays (< 1 msec). * @@ -49,11 +47,10 @@ void __ndelay(unsigned long long nsecs, unsigned long lpj) void udelay(unsigned long usecs) { - __udelay(usecs, loops_per_jiffy); + __udelay(usecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy); } void ndelay(unsigned long nsecs) { - __ndelay(nsecs, loops_per_jiffy); + __ndelay(nsecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy); } - diff --git a/include/asm-sh/delay.h b/include/asm-sh/delay.h index db599b2a5a9..031db84f2aa 100644 --- a/include/asm-sh/delay.h +++ b/include/asm-sh/delay.h @@ -6,7 +6,7 @@ * * Delay routines calling functions in arch/sh/lib/delay.c */ - + extern void __bad_udelay(void); extern void __bad_ndelay(void); @@ -15,13 +15,17 @@ extern void __ndelay(unsigned long nsecs); extern void __const_udelay(unsigned long usecs); extern void __delay(unsigned long loops); +#ifdef CONFIG_SUPERH32 #define udelay(n) (__builtin_constant_p(n) ? \ ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ __udelay(n)) - #define ndelay(n) (__builtin_constant_p(n) ? \ ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ __ndelay(n)) +#else +extern void udelay(unsigned long usecs); +extern void ndelay(unsigned long nsecs); +#endif #endif /* __ASM_SH_DELAY_H */ -- cgit v1.2.3-70-g09d2 From b542ad1161d3b1771ea6fa3e7cedd311a49f91c9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 20 Nov 2007 15:14:31 +0900 Subject: sh: Plug in the SHmedia ELF relocations. Signed-off-by: Paul Mundt --- include/asm-sh/elf.h | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 12cc4b392bf..5a1e920f059 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -5,7 +5,7 @@ #include #include -/* SH relocation types */ +/* SH (particularly SHcompact) relocation types */ #define R_SH_NONE 0 #define R_SH_DIR32 1 #define R_SH_REL32 2 @@ -43,6 +43,11 @@ #define R_SH_RELATIVE 165 #define R_SH_GOTOFF 166 #define R_SH_GOTPC 167 +/* SHmedia relocs */ +#define R_SH_IMM_LOW16 246 +#define R_SH_IMM_LOW16_PCREL 247 +#define R_SH_IMM_MEDLOW16 248 +#define R_SH_IMM_MEDLOW16_PCREL 249 /* Keep this the last entry. */ #define R_SH_NUM 256 @@ -103,12 +108,35 @@ typedef struct user_fpu_struct elf_fpregset_t; #define ELF_PLATFORM (NULL) +#ifdef __SH5__ +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ + _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ + _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ + _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ + _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ + _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ + _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ + _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ + _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ + _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ + _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ + _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ + _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ + _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ + _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ + _r->sr = SR_FD | SR_MMU; } while (0) +#else #define ELF_PLAT_INIT(_r, load_addr) \ do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ _r->sr = SR_FD; } while (0) +#endif #ifdef __KERNEL__ #define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) -- cgit v1.2.3-70-g09d2 From 379a95d1d2c3e3682e380084c40b6fc01e38fa1f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 20 Nov 2007 16:51:28 +0900 Subject: sh: Tidy up various clear_page()/copy_page() definitions. Signed-off-by: Paul Mundt --- arch/sh/lib64/page_clear.S | 4 ++-- arch/sh/lib64/page_copy.S | 56 ++++++++++++++++++++++------------------------ arch/sh/mm/copy_page.S | 6 ++--- arch/sh/mm/init.c | 15 ------------- arch/sh/mm/pg-nommu.c | 4 ++-- include/asm-sh/page.h | 12 ++-------- 6 files changed, 36 insertions(+), 61 deletions(-) (limited to 'include') diff --git a/arch/sh/lib64/page_clear.S b/arch/sh/lib64/page_clear.S index ac0111d669a..007ab48ecc1 100644 --- a/arch/sh/lib64/page_clear.S +++ b/arch/sh/lib64/page_clear.S @@ -25,8 +25,8 @@ .little .balign 8 - .global sh64_page_clear -sh64_page_clear: + .global clear_page +clear_page: pta/l 1f, tr1 pta/l 2f, tr2 ptabs/l r18, tr0 diff --git a/arch/sh/lib64/page_copy.S b/arch/sh/lib64/page_copy.S index e159c3cd258..0ec6fca63b5 100644 --- a/arch/sh/lib64/page_copy.S +++ b/arch/sh/lib64/page_copy.S @@ -10,8 +10,8 @@ of SH5-101 cut2 eval chip with Cayman board DDR memory. Parameters: - r2 : source effective address (start of page) - r3 : destination effective address (start of page) + r2 : destination effective address (start of page) + r3 : source effective address (start of page) Always copies 4096 bytes. @@ -27,10 +27,10 @@ .little .balign 8 - .global sh64_page_copy -sh64_page_copy: + .global copy_page +copy_page: - /* Copy 4096 bytes worth of data from r2 to r3. + /* Copy 4096 bytes worth of data from r3 to r2. Do prefetches 4 lines ahead. Do alloco 2 lines ahead */ @@ -41,21 +41,21 @@ sh64_page_copy: #if 0 /* TAKum03020 */ - ld.q r2, 0x00, r63 - ld.q r2, 0x20, r63 - ld.q r2, 0x40, r63 - ld.q r2, 0x60, r63 + ld.q r3, 0x00, r63 + ld.q r3, 0x20, r63 + ld.q r3, 0x40, r63 + ld.q r3, 0x60, r63 #endif - alloco r3, 0x00 + alloco r2, 0x00 synco ! TAKum03020 - alloco r3, 0x20 + alloco r2, 0x20 synco ! TAKum03020 movi 3968, r6 - add r3, r6, r6 + add r2, r6, r6 addi r6, 64, r7 addi r7, 64, r8 - sub r2, r3, r60 + sub r3, r2, r60 addi r60, 8, r61 addi r61, 8, r62 addi r62, 8, r23 @@ -67,25 +67,23 @@ sh64_page_copy: 1: #if 0 /* TAKum03020 */ - bge/u r3, r6, tr2 ! skip prefetch for last 4 lines - ldx.q r3, r22, r63 ! prefetch 4 lines hence + bge/u r2, r6, tr2 ! skip prefetch for last 4 lines + ldx.q r2, r22, r63 ! prefetch 4 lines hence #endif 2: - bge/u r3, r7, tr3 ! skip alloco for last 2 lines - alloco r3, 0x40 ! alloc destination line 2 lines ahead + bge/u r2, r7, tr3 ! skip alloco for last 2 lines + alloco r2, 0x40 ! alloc destination line 2 lines ahead synco ! TAKum03020 3: - ldx.q r3, r60, r36 - ldx.q r3, r61, r37 - ldx.q r3, r62, r38 - ldx.q r3, r23, r39 - st.q r3, 0, r36 - st.q r3, 8, r37 - st.q r3, 16, r38 - st.q r3, 24, r39 - addi r3, 32, r3 - bgt/l r8, r3, tr1 + ldx.q r2, r60, r36 + ldx.q r2, r61, r37 + ldx.q r2, r62, r38 + ldx.q r2, r23, r39 + st.q r2, 0, r36 + st.q r2, 8, r37 + st.q r2, 16, r38 + st.q r2, 24, r39 + addi r2, 32, r2 + bgt/l r8, r2, tr1 blink tr0, r63 ! return - - diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 40685018b95..b879545fa28 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -9,11 +9,11 @@ #include /* - * copy_page_slow + * copy_page * @to: P1 address * @from: P1 address * - * void copy_page_slow(void *to, void *from) + * void copy_page(void *to, void *from) */ /* @@ -23,7 +23,7 @@ * r10 --- to * r11 --- from */ -ENTRY(copy_page_slow) +ENTRY(copy_page) mov.l r8,@-r15 mov.l r10,@-r15 mov.l r11,@-r15 diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 5d19c8c7ab5..79c309780f9 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -24,9 +24,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; -void (*copy_page)(void *from, void *to); -void (*clear_page)(void *to); - void show_mem(void) { int total = 0, reserved = 0, free = 0; @@ -203,18 +200,6 @@ void __init mem_init(void) memset(empty_zero_page, 0, PAGE_SIZE); __flush_wback_region(empty_zero_page, PAGE_SIZE); - /* - * Setup wrappers for copy/clear_page(), these will get overridden - * later in the boot process if a better method is available. - */ -#ifdef CONFIG_MMU - copy_page = copy_page_slow; - clear_page = clear_page_slow; -#else - copy_page = copy_page_nommu; - clear_page = clear_page_nommu; -#endif - after_bootmem = 1; codesize = (unsigned long) &_etext - (unsigned long) &_text; diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c index d15221beaa1..677dd57f087 100644 --- a/arch/sh/mm/pg-nommu.c +++ b/arch/sh/mm/pg-nommu.c @@ -14,12 +14,12 @@ #include #include -void copy_page_nommu(void *to, void *from) +void copy_page(void *to, void *from) { memcpy(to, from, PAGE_SIZE); } -void clear_page_nommu(void *to) +void clear_page(void *to) { memset(to, 0, PAGE_SIZE); } diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 93a89841227..e21b0d12e13 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -55,20 +55,12 @@ #ifndef __ASSEMBLY__ -extern void (*clear_page)(void *to); -extern void (*copy_page)(void *to, void *from); - extern unsigned long shm_align_mask; extern unsigned long max_low_pfn, min_low_pfn; extern unsigned long memory_start, memory_end; -#ifdef CONFIG_MMU -extern void clear_page_slow(void *to); -extern void copy_page_slow(void *to, void *from); -#else -extern void clear_page_nommu(void *to); -extern void copy_page_nommu(void *to, void *from); -#endif +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) -- cgit v1.2.3-70-g09d2 From 5a4f7c66be981c6b5f44a4d66a14ea6ac9b7b6b0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 20 Nov 2007 18:08:06 +0900 Subject: sh: Share bug/debug traps across _32 and _64. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_32 | 2 +- arch/sh/kernel/Makefile_64 | 2 +- arch/sh/kernel/cpu/sh2/entry.S | 2 +- arch/sh/kernel/process_32.c | 46 ----------------------------- arch/sh/kernel/process_64.c | 15 ++++------ arch/sh/kernel/traps.c | 66 ++++++++++++++++++++++++++++++++++++++++++ arch/sh/kernel/traps_32.c | 25 +--------------- include/asm-sh/ptrace.h | 2 +- include/asm-sh/system.h | 25 ++++++++++++---- include/asm-sh/types.h | 6 ++++ 10 files changed, 102 insertions(+), 89 deletions(-) create mode 100644 arch/sh/kernel/traps.c (limited to 'include') diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 34e8fa0d40c..990ba74db0d 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -6,7 +6,7 @@ extra-y := head_32.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \ - syscalls_32.o time.o topology.o traps_32.o + syscalls_32.o time.o topology.o traps.o traps_32.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index aeac4006df7..10e3ae1c64b 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -2,7 +2,7 @@ extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \ - syscalls_64.o time.o topology.o traps_64.o + syscalls_64.o time.o topology.o traps.o traps_64.o obj-y += cpu/ timers/ obj-$(CONFIG_VSYSCALL) += vsyscall/ diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index ee8f1fe84b0..4ff2334b4a3 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -250,7 +250,7 @@ ENTRY(sh_bios_handler) 1: .long gdb_vbr_vector #endif /* CONFIG_SH_STANDARD_BIOS */ -ENTRY(address_error_handler) +ENTRY(address_error_trap_handler) mov r15,r4 ! regs add #4,r4 mov #OFF_PC,r0 diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index c9291f46231..b48324867ee 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -482,49 +482,3 @@ asmlinkage void break_point_trap(void) force_sig(SIGTRAP, current); } - -/* - * Generic trap handler. - */ -asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - - /* Rewind */ - regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); - - if (notify_die(DIE_TRAP, "debug trap", regs, 0, regs->tra & 0xff, - SIGTRAP) == NOTIFY_STOP) - return; - - force_sig(SIGTRAP, current); -} - -/* - * Special handler for BUG() traps. - */ -asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - - /* Rewind */ - regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); - - if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff, - SIGTRAP) == NOTIFY_STOP) - return; - -#ifdef CONFIG_BUG - if (__kernel_text_address(instruction_pointer(regs))) { - u16 insn = *(u16 *)instruction_pointer(regs); - if (insn == TRAPA_BUG_OPCODE) - handle_BUG(regs); - } -#endif - - force_sig(SIGTRAP, current); -} diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 47415671da0..92d01465eb8 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -1,12 +1,10 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * arch/sh/kernel/process_64.c * - * arch/sh64/kernel/process.c + * This file handles the architecture-dependent parts of process handling.. * * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2007 Paul Mundt * Copyright (C) 2003, 2004 Richard Curnow * * Started from SH3/4 version: @@ -15,10 +13,9 @@ * In turn started from i386 version: * Copyright (C) 1995 Linus Torvalds * - */ - -/* - * This file handles the architecture-dependent parts of process handling.. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c new file mode 100644 index 00000000000..bf70827b17c --- /dev/null +++ b/arch/sh/kernel/traps.c @@ -0,0 +1,66 @@ +#include +#include +#include +#include +#include + +#ifdef CONFIG_BUG +static void handle_BUG(struct pt_regs *regs) +{ + enum bug_trap_type tt; + tt = report_bug(regs->pc, regs); + if (tt == BUG_TRAP_TYPE_WARN) { + regs->pc += instruction_size(regs->pc); + return; + } + + die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); +} + +int is_valid_bugaddr(unsigned long addr) +{ + return addr >= PAGE_OFFSET; +} +#endif + +/* + * Generic trap handler. + */ +BUILD_TRAP_HANDLER(debug) +{ + TRAP_HANDLER_DECL; + + /* Rewind */ + regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); + + if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff, + SIGTRAP) == NOTIFY_STOP) + return; + + force_sig(SIGTRAP, current); +} + +/* + * Special handler for BUG() traps. + */ +BUILD_TRAP_HANDLER(bug) +{ + TRAP_HANDLER_DECL; + + /* Rewind */ + regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); + + if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff, + SIGTRAP) == NOTIFY_STOP) + return; + +#ifdef CONFIG_BUG + if (__kernel_text_address(instruction_pointer(regs))) { + opcode_t insn = *(opcode_t *)instruction_pointer(regs); + if (insn == TRAPA_BUG_OPCODE) + handle_BUG(regs); + } +#endif + + force_sig(SIGTRAP, current); +} diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index cf99111cb33..0d05fb3c48e 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -837,10 +837,6 @@ void *set_exception_table_vec(unsigned int vec, void *handler) return old_handler; } -extern asmlinkage void address_error_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs); - void __init trap_init(void) { set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); @@ -866,7 +862,7 @@ void __init trap_init(void) #endif #ifdef CONFIG_CPU_SH2 - set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_handler); + set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler); #endif #ifdef CONFIG_CPU_SH2A set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); @@ -877,25 +873,6 @@ void __init trap_init(void) per_cpu_trap_init(); } -#ifdef CONFIG_BUG -void handle_BUG(struct pt_regs *regs) -{ - enum bug_trap_type tt; - tt = report_bug(regs->pc, regs); - if (tt == BUG_TRAP_TYPE_WARN) { - regs->pc += 2; - return; - } - - die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); -} - -int is_valid_bugaddr(unsigned long addr) -{ - return addr >= PAGE_OFFSET; -} -#endif - void show_trace(struct task_struct *tsk, unsigned long *sp, struct pt_regs *regs) { diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h index a83a7b45ba6..8d6c92b3e77 100644 --- a/include/asm-sh/ptrace.h +++ b/include/asm-sh/ptrace.h @@ -95,7 +95,7 @@ struct pt_dspregs { #include #define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define instruction_pointer(regs) ((regs)->pc) +#define instruction_pointer(regs) ((unsigned long)(regs)->pc) extern void show_regs(struct pt_regs *); diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 0cfa96aa584..6b02dfd587e 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -185,12 +185,25 @@ void default_idle(void); void per_cpu_trap_init(void); asmlinkage void break_point_trap(void); -asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs); -asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs); + +#ifdef CONFIG_SUPERH32 +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ + unsigned long r6, unsigned long r7, \ + struct pt_regs __regs) + +#define TRAP_HANDLER_DECL \ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ + unsigned int vec = regs->tra; +#else +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) +#define TRAP_HANDLER_DECL +#endif + +BUILD_TRAP_HANDLER(address_error); +BUILD_TRAP_HANDLER(debug); +BUILD_TRAP_HANDLER(bug); #define arch_align_stack(x) (x) diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h index 7ba69d9707e..a6e1d4126e6 100644 --- a/include/asm-sh/types.h +++ b/include/asm-sh/types.h @@ -52,6 +52,12 @@ typedef unsigned long long u64; typedef u32 dma_addr_t; +#ifdef CONFIG_SUPERH32 +typedef u16 opcode_t; +#else +typedef u32 opcode_t; +#endif + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3-70-g09d2 From ac490a4893d37279f704876d430c3683071398b2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 20 Nov 2007 18:26:28 +0900 Subject: sh: Move quad-word real-address I/O defs to io.h. Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_64.c | 1 - include/asm-sh/io.h | 5 +++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 14e7d5e5679..51bb546365c 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -253,7 +253,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) { - extern void poke_real_address_q(unsigned long long addr, unsigned long long data); #define WPC_DBRMODE 0x0d104008 static int first_call = 1; diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 556aabe844c..74305edceee 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -248,6 +248,11 @@ static inline void ctrl_delay(void) #endif } +/* Quad-word real-mode I/O, don't ask.. */ +unsigned long long peek_real_address_q(unsigned long long addr); +unsigned long long poke_real_address_q(unsigned long long addr, + unsigned long long val); + #define IO_SPACE_LIMIT 0xffffffff #if !defined(CONFIG_MMU) -- cgit v1.2.3-70-g09d2 From ffd25eb6cd1aa2bcdedf0c06be7e180022055cd1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 20 Nov 2007 18:44:39 +0900 Subject: sh: Stubs for fpu disabled on SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/processor_64.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index 312fd73fb87..f5464822923 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -262,11 +262,16 @@ static inline void grab_fpu(struct pt_regs *regs) #define FPSCR_INIT 0x00000000 #endif +#ifdef CONFIG_SH_FPU /* Save the current FP regs */ void fpsave(struct sh_fpu_hard_struct *fpregs); /* Initialise the FP state of a task */ void fpinit(struct sh_fpu_hard_struct *fpregs); +#else +#define fpsave(fpregs) do { } while (0) +#define fpinit(fpregs) do { } while (0) +#endif extern struct task_struct *last_task_used_math; -- cgit v1.2.3-70-g09d2 From caff44e7db86243fd6163bc79e543123b0139a46 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 15:23:07 +0900 Subject: sh: Set HPAGE_SHIFT for 512MB hugetlb pages. Signed-off-by: Paul Mundt --- include/asm-sh/page.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index e21b0d12e13..cdaacefe509 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -45,6 +45,8 @@ #define HPAGE_SHIFT 22 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) #define HPAGE_SHIFT 26 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define HPAGE_SHIFT 29 #endif #ifdef CONFIG_HUGETLB_PAGE -- cgit v1.2.3-70-g09d2 From 6deb6f9129591a2386f5c125d54a22ab78fc8b61 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 15:34:02 +0900 Subject: sh: Move PXSEG comments to addrspace.h. Signed-off-by: Paul Mundt --- include/asm-sh/addrspace.h | 8 ++++++++ include/asm-sh/page.h | 16 ---------------- 2 files changed, 8 insertions(+), 16 deletions(-) (limited to 'include') diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h index cb9da9992fa..e7f2deb28e0 100644 --- a/include/asm-sh/addrspace.h +++ b/include/asm-sh/addrspace.h @@ -17,6 +17,14 @@ /* If this CPU supports segmentation, hook up the helpers */ #ifdef P1SEG +/* + [ P0/U0 (virtual) ] 0x00000000 <------ User space + [ P1 (fixed) cached ] 0x80000000 <------ Kernel space + [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access + [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area + [ P4 control ] 0xE0000000 + */ + /* Returns the privileged segment base of a given address */ #define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index cdaacefe509..407bf5a1493 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -5,14 +5,6 @@ * Copyright (C) 1999 Niibe Yutaka */ -/* - [ P0/U0 (virtual) ] 0x00000000 <------ User space - [ P1 (fixed) cached ] 0x80000000 <------ Kernel space - [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access - [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area - [ P4 control ] 0xE0000000 - */ - #ifdef __KERNEL__ /* PAGE_SHIFT determines the page size */ @@ -115,14 +107,6 @@ typedef struct { unsigned long pgd; } pgd_t; /* to align the pointer to the (next) page boundary */ #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -/* - * IF YOU CHANGE THIS, PLEASE ALSO CHANGE - * - * arch/sh/kernel/vmlinux.lds.S - * - * which has the same constant encoded.. - */ - #define __MEMORY_START CONFIG_MEMORY_START #define __MEMORY_SIZE CONFIG_MEMORY_SIZE -- cgit v1.2.3-70-g09d2 From 0b2328bbc08ee8f7377f9dccdd6fb0c707b34d2f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 15:58:24 +0900 Subject: sh: Fix up generic BUG build for SH-5. Signed-off-by: Paul Mundt --- include/asm-sh/bug.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include') diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h index afb1c2723ec..c0171804016 100644 --- a/include/asm-sh/bug.h +++ b/include/asm-sh/bug.h @@ -72,11 +72,6 @@ do { \ unlikely(__ret_warn_on); \ }) -struct pt_regs; - -/* arch/sh/kernel/traps.c */ -void handle_BUG(struct pt_regs *); - #endif /* CONFIG_GENERIC_BUG */ #include -- cgit v1.2.3-70-g09d2 From 55183e9bb2c2ce43d88eaa575c2d6d4fd6d865a3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 16:19:12 +0900 Subject: sh: SH-5 uses a 64-bit PTE_MAGNITUDE, as X2 TLB. Signed-off-by: Paul Mundt --- include/asm-sh/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 5a800c69e04..b4d7561cd9e 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -49,7 +49,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; * traditional two-level paging structure */ /* PTE bits */ -#ifdef CONFIG_X2TLB +#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64) # define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ #else # define PTE_MAGNITUDE 2 /* 32-bit PTEs */ -- cgit v1.2.3-70-g09d2 From c8eef8800f1c693a2de6374b1948c8ea5e0ad75f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 17:28:09 +0900 Subject: sh: Purge dead sh64 headers. Signed-off-by: Paul Mundt --- include/asm-sh64/Kbuild | 1 - include/asm-sh64/a.out.h | 38 ------- include/asm-sh64/atomic.h | 158 ---------------------------- include/asm-sh64/auxvec.h | 4 - include/asm-sh64/bitops.h | 155 ---------------------------- include/asm-sh64/bug.h | 19 ---- include/asm-sh64/bugs.h | 38 ------- include/asm-sh64/byteorder.h | 49 --------- include/asm-sh64/cpumask.h | 6 -- include/asm-sh64/cputime.h | 6 -- include/asm-sh64/current.h | 28 ----- include/asm-sh64/delay.h | 11 -- include/asm-sh64/device.h | 7 -- include/asm-sh64/div64.h | 6 -- include/asm-sh64/dma-mapping.h | 194 ----------------------------------- include/asm-sh64/dma.h | 41 -------- include/asm-sh64/elf.h | 107 ------------------- include/asm-sh64/emergency-restart.h | 6 -- include/asm-sh64/errno.h | 6 -- include/asm-sh64/fb.h | 19 ---- include/asm-sh64/fcntl.h | 1 - include/asm-sh64/futex.h | 6 -- include/asm-sh64/gpio.h | 8 -- include/asm-sh64/hardirq.h | 18 ---- include/asm-sh64/hw_irq.h | 15 --- include/asm-sh64/ide.h | 29 ------ include/asm-sh64/ioctl.h | 1 - include/asm-sh64/ioctls.h | 116 --------------------- include/asm-sh64/ipcbuf.h | 40 -------- include/asm-sh64/irq_regs.h | 1 - include/asm-sh64/kdebug.h | 1 - include/asm-sh64/kmap_types.h | 7 -- include/asm-sh64/linkage.h | 7 -- include/asm-sh64/local.h | 7 -- include/asm-sh64/mc146818rtc.h | 7 -- include/asm-sh64/mman.h | 6 -- include/asm-sh64/mmu.h | 7 -- include/asm-sh64/module.h | 20 ---- include/asm-sh64/msgbuf.h | 42 -------- include/asm-sh64/mutex.h | 9 -- include/asm-sh64/namei.h | 24 ----- include/asm-sh64/page.h | 119 --------------------- include/asm-sh64/param.h | 42 -------- include/asm-sh64/percpu.h | 6 -- include/asm-sh64/pgalloc.h | 125 ---------------------- include/asm-sh64/poll.h | 8 -- include/asm-sh64/posix_types.h | 131 ----------------------- include/asm-sh64/ptrace.h | 35 ------- include/asm-sh64/resource.h | 6 -- include/asm-sh64/scatterlist.h | 37 ------- include/asm-sh64/sci.h | 1 - include/asm-sh64/sections.h | 7 -- include/asm-sh64/segment.h | 6 -- include/asm-sh64/semaphore-helper.h | 101 ------------------ include/asm-sh64/semaphore.h | 119 --------------------- include/asm-sh64/sembuf.h | 36 ------- include/asm-sh64/serial.h | 31 ------ include/asm-sh64/setup.h | 22 ---- include/asm-sh64/shmbuf.h | 53 ---------- include/asm-sh64/shmparam.h | 12 --- include/asm-sh64/sigcontext.h | 30 ------ include/asm-sh64/siginfo.h | 6 -- include/asm-sh64/signal.h | 159 ---------------------------- include/asm-sh64/smp.h | 15 --- include/asm-sh64/socket.h | 6 -- include/asm-sh64/sockios.h | 25 ----- include/asm-sh64/spinlock.h | 17 --- include/asm-sh64/stat.h | 88 ---------------- include/asm-sh64/statfs.h | 6 -- include/asm-sh64/termbits.h | 6 -- include/asm-sh64/termios.h | 99 ------------------ include/asm-sh64/timex.h | 31 ------ include/asm-sh64/tlbflush.h | 27 ----- include/asm-sh64/topology.h | 6 -- include/asm-sh64/types.h | 74 ------------- include/asm-sh64/ucontext.h | 23 ----- include/asm-sh64/unaligned.h | 17 --- include/asm-sh64/user.h | 70 ------------- 78 files changed, 2873 deletions(-) delete mode 100644 include/asm-sh64/Kbuild delete mode 100644 include/asm-sh64/a.out.h delete mode 100644 include/asm-sh64/atomic.h delete mode 100644 include/asm-sh64/auxvec.h delete mode 100644 include/asm-sh64/bitops.h delete mode 100644 include/asm-sh64/bug.h delete mode 100644 include/asm-sh64/bugs.h delete mode 100644 include/asm-sh64/byteorder.h delete mode 100644 include/asm-sh64/cpumask.h delete mode 100644 include/asm-sh64/cputime.h delete mode 100644 include/asm-sh64/current.h delete mode 100644 include/asm-sh64/delay.h delete mode 100644 include/asm-sh64/device.h delete mode 100644 include/asm-sh64/div64.h delete mode 100644 include/asm-sh64/dma-mapping.h delete mode 100644 include/asm-sh64/dma.h delete mode 100644 include/asm-sh64/elf.h delete mode 100644 include/asm-sh64/emergency-restart.h delete mode 100644 include/asm-sh64/errno.h delete mode 100644 include/asm-sh64/fb.h delete mode 100644 include/asm-sh64/fcntl.h delete mode 100644 include/asm-sh64/futex.h delete mode 100644 include/asm-sh64/gpio.h delete mode 100644 include/asm-sh64/hardirq.h delete mode 100644 include/asm-sh64/hw_irq.h delete mode 100644 include/asm-sh64/ide.h delete mode 100644 include/asm-sh64/ioctl.h delete mode 100644 include/asm-sh64/ioctls.h delete mode 100644 include/asm-sh64/ipcbuf.h delete mode 100644 include/asm-sh64/irq_regs.h delete mode 100644 include/asm-sh64/kdebug.h delete mode 100644 include/asm-sh64/kmap_types.h delete mode 100644 include/asm-sh64/linkage.h delete mode 100644 include/asm-sh64/local.h delete mode 100644 include/asm-sh64/mc146818rtc.h delete mode 100644 include/asm-sh64/mman.h delete mode 100644 include/asm-sh64/mmu.h delete mode 100644 include/asm-sh64/module.h delete mode 100644 include/asm-sh64/msgbuf.h delete mode 100644 include/asm-sh64/mutex.h delete mode 100644 include/asm-sh64/namei.h delete mode 100644 include/asm-sh64/page.h delete mode 100644 include/asm-sh64/param.h delete mode 100644 include/asm-sh64/percpu.h delete mode 100644 include/asm-sh64/pgalloc.h delete mode 100644 include/asm-sh64/poll.h delete mode 100644 include/asm-sh64/posix_types.h delete mode 100644 include/asm-sh64/ptrace.h delete mode 100644 include/asm-sh64/resource.h delete mode 100644 include/asm-sh64/scatterlist.h delete mode 100644 include/asm-sh64/sci.h delete mode 100644 include/asm-sh64/sections.h delete mode 100644 include/asm-sh64/segment.h delete mode 100644 include/asm-sh64/semaphore-helper.h delete mode 100644 include/asm-sh64/semaphore.h delete mode 100644 include/asm-sh64/sembuf.h delete mode 100644 include/asm-sh64/serial.h delete mode 100644 include/asm-sh64/setup.h delete mode 100644 include/asm-sh64/shmbuf.h delete mode 100644 include/asm-sh64/shmparam.h delete mode 100644 include/asm-sh64/sigcontext.h delete mode 100644 include/asm-sh64/siginfo.h delete mode 100644 include/asm-sh64/signal.h delete mode 100644 include/asm-sh64/smp.h delete mode 100644 include/asm-sh64/socket.h delete mode 100644 include/asm-sh64/sockios.h delete mode 100644 include/asm-sh64/spinlock.h delete mode 100644 include/asm-sh64/stat.h delete mode 100644 include/asm-sh64/statfs.h delete mode 100644 include/asm-sh64/termbits.h delete mode 100644 include/asm-sh64/termios.h delete mode 100644 include/asm-sh64/timex.h delete mode 100644 include/asm-sh64/tlbflush.h delete mode 100644 include/asm-sh64/topology.h delete mode 100644 include/asm-sh64/types.h delete mode 100644 include/asm-sh64/ucontext.h delete mode 100644 include/asm-sh64/unaligned.h delete mode 100644 include/asm-sh64/user.h (limited to 'include') diff --git a/include/asm-sh64/Kbuild b/include/asm-sh64/Kbuild deleted file mode 100644 index c68e1680da0..00000000000 --- a/include/asm-sh64/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-sh64/a.out.h b/include/asm-sh64/a.out.h deleted file mode 100644 index 237ee4e5b72..00000000000 --- a/include/asm-sh64/a.out.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __ASM_SH64_A_OUT_H -#define __ASM_SH64_A_OUT_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/a.out.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#ifdef __KERNEL__ - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -#endif - -#endif /* __ASM_SH64_A_OUT_H */ diff --git a/include/asm-sh64/atomic.h b/include/asm-sh64/atomic.h deleted file mode 100644 index 28f2ea9b567..00000000000 --- a/include/asm-sh64/atomic.h +++ /dev/null @@ -1,158 +0,0 @@ -#ifndef __ASM_SH64_ATOMIC_H -#define __ASM_SH64_ATOMIC_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/atomic.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - */ - -typedef struct { volatile int counter; } atomic_t; - -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) ((v)->counter = (i)) - -#include - -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ - -static __inline__ void atomic_add(int i, atomic_t * v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v += i; - local_irq_restore(flags); -} - -static __inline__ void atomic_sub(int i, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v -= i; - local_irq_restore(flags); -} - -static __inline__ int atomic_add_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static __inline__ int atomic_sub_return(int i, atomic_t * v) -{ - unsigned long temp, flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); - - return temp; -} - -#define atomic_dec_return(v) atomic_sub_return(1,(v)) -#define atomic_inc_return(v) atomic_add_return(1,(v)) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) - -#define atomic_inc(v) atomic_add(1,(v)) -#define atomic_dec(v) atomic_sub(1,(v)) - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (ret != u) - v->counter += a; - local_irq_restore(flags); - - return ret != u; -} -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -static __inline__ void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v &= ~mask; - local_irq_restore(flags); -} - -static __inline__ void atomic_set_mask(unsigned int mask, atomic_t *v) -{ - unsigned long flags; - - local_irq_save(flags); - *(long *)v |= mask; - local_irq_restore(flags); -} - -/* Atomic operations are already serializing on SH */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include -#endif /* __ASM_SH64_ATOMIC_H */ diff --git a/include/asm-sh64/auxvec.h b/include/asm-sh64/auxvec.h deleted file mode 100644 index 1ad5a44bdc7..00000000000 --- a/include/asm-sh64/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_SH64_AUXVEC_H -#define __ASM_SH64_AUXVEC_H - -#endif /* __ASM_SH64_AUXVEC_H */ diff --git a/include/asm-sh64/bitops.h b/include/asm-sh64/bitops.h deleted file mode 100644 index 600c59efb4c..00000000000 --- a/include/asm-sh64/bitops.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef __ASM_SH64_BITOPS_H -#define __ASM_SH64_BITOPS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/bitops.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - */ - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -/* For __swab32 */ -#include - -static __inline__ void set_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a |= mask; - local_irq_restore(flags); -} - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() -static inline void clear_bit(int nr, volatile unsigned long *a) -{ - int mask; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a &= ~mask; - local_irq_restore(flags); -} - -static __inline__ void change_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a ^= mask; - local_irq_restore(flags); -} - -static __inline__ int test_and_set_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a |= mask; - local_irq_restore(flags); - - return retval; -} - -static __inline__ int test_and_clear_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a &= ~mask; - local_irq_restore(flags); - - return retval; -} - -static __inline__ int test_and_change_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore(flags); - - return retval; -} - -#include - -static __inline__ unsigned long ffz(unsigned long word) -{ - unsigned long result, __d2, __d3; - - __asm__("gettr tr0, %2\n\t" - "pta $+32, tr0\n\t" - "andi %1, 1, %3\n\t" - "beq %3, r63, tr0\n\t" - "pta $+4, tr0\n" - "0:\n\t" - "shlri.l %1, 1, %1\n\t" - "addi %0, 1, %0\n\t" - "andi %1, 1, %3\n\t" - "beqi %3, 1, tr0\n" - "1:\n\t" - "ptabs %2, tr0\n\t" - : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) - : "0" (0L), "1" (word)); - - return result; -} - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_BITOPS_H */ diff --git a/include/asm-sh64/bug.h b/include/asm-sh64/bug.h deleted file mode 100644 index f3a9c9248ef..00000000000 --- a/include/asm-sh64/bug.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __ASM_SH64_BUG_H -#define __ASM_SH64_BUG_H - -#ifdef CONFIG_BUG -/* - * Tell the user there is some problem, then force a segfault (in process - * context) or a panic (interrupt context). - */ -#define BUG() do { \ - printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ - *(volatile int *)0 = 0; \ -} while (0) - -#define HAVE_ARCH_BUG -#endif - -#include - -#endif /* __ASM_SH64_BUG_H */ diff --git a/include/asm-sh64/bugs.h b/include/asm-sh64/bugs.h deleted file mode 100644 index 05554aaea67..00000000000 --- a/include/asm-sh64/bugs.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __ASM_SH64_BUGS_H -#define __ASM_SH64_BUGS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/bugs.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -/* - * I don't know of any Super-H bugs yet. - */ - -#include - -static void __init check_bugs(void) -{ - extern char *get_cpu_subtype(void); - extern unsigned long loops_per_jiffy; - - cpu_data->loops_per_jiffy = loops_per_jiffy; - - printk("CPU: %s\n", get_cpu_subtype()); -} -#endif /* __ASM_SH64_BUGS_H */ diff --git a/include/asm-sh64/byteorder.h b/include/asm-sh64/byteorder.h deleted file mode 100644 index 7419d78820e..00000000000 --- a/include/asm-sh64/byteorder.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef __ASM_SH64_BYTEORDER_H -#define __ASM_SH64_BYTEORDER_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/byteorder.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#include - -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) -{ - __asm__("byterev %0, %0\n\t" - "shari %0, 32, %0" - : "=r" (x) - : "0" (x)); - return x; -} - -static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) -{ - __asm__("byterev %0, %0\n\t" - "shari %0, 48, %0" - : "=r" (x) - : "0" (x)); - return x; -} - -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __LITTLE_ENDIAN__ -#include -#else -#include -#endif - -#endif /* __ASM_SH64_BYTEORDER_H */ diff --git a/include/asm-sh64/cpumask.h b/include/asm-sh64/cpumask.h deleted file mode 100644 index b7b105dbeda..00000000000 --- a/include/asm-sh64/cpumask.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_CPUMASK_H -#define __ASM_SH64_CPUMASK_H - -#include - -#endif /* __ASM_SH64_CPUMASK_H */ diff --git a/include/asm-sh64/cputime.h b/include/asm-sh64/cputime.h deleted file mode 100644 index 0fd89da2aa8..00000000000 --- a/include/asm-sh64/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __SH64_CPUTIME_H -#define __SH64_CPUTIME_H - -#include - -#endif /* __SH64_CPUTIME_H */ diff --git a/include/asm-sh64/current.h b/include/asm-sh64/current.h deleted file mode 100644 index 261224339d6..00000000000 --- a/include/asm-sh64/current.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_SH64_CURRENT_H -#define __ASM_SH64_CURRENT_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/current.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ - -#include - -struct task_struct; - -static __inline__ struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* __ASM_SH64_CURRENT_H */ - diff --git a/include/asm-sh64/delay.h b/include/asm-sh64/delay.h deleted file mode 100644 index 6ae31301a16..00000000000 --- a/include/asm-sh64/delay.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_SH64_DELAY_H -#define __ASM_SH64_DELAY_H - -extern void __delay(int loops); -extern void __udelay(unsigned long long usecs, unsigned long lpj); -extern void __ndelay(unsigned long long nsecs, unsigned long lpj); -extern void udelay(unsigned long usecs); -extern void ndelay(unsigned long nsecs); - -#endif /* __ASM_SH64_DELAY_H */ - diff --git a/include/asm-sh64/device.h b/include/asm-sh64/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/include/asm-sh64/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/include/asm-sh64/div64.h b/include/asm-sh64/div64.h deleted file mode 100644 index f75869565e2..00000000000 --- a/include/asm-sh64/div64.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_DIV64_H -#define __ASM_SH64_DIV64_H - -#include - -#endif /* __ASM_SH64_DIV64_H */ diff --git a/include/asm-sh64/dma-mapping.h b/include/asm-sh64/dma-mapping.h deleted file mode 100644 index 18f8dd642ac..00000000000 --- a/include/asm-sh64/dma-mapping.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef __ASM_SH_DMA_MAPPING_H -#define __ASM_SH_DMA_MAPPING_H - -#include -#include -#include - -struct pci_dev; -extern void *consistent_alloc(struct pci_dev *hwdev, size_t size, - dma_addr_t *dma_handle); -extern void consistent_free(struct pci_dev *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -#define dma_supported(dev, mask) (1) - -static inline int dma_set_mask(struct device *dev, u64 mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = mask; - - return 0; -} - -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - return consistent_alloc(NULL, size, dma_handle); -} - -static inline void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - consistent_free(NULL, size, vaddr, dma_handle); -} - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_is_consistent(d, h) (1) - -static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir) -{ - unsigned long start = (unsigned long) vaddr; - unsigned long s = start & L1_CACHE_ALIGN_MASK; - unsigned long e = (start + size) & L1_CACHE_ALIGN_MASK; - - for (; s <= e; s += L1_CACHE_BYTES) - asm volatile ("ocbp %0, 0" : : "r" (s)); -} - -static inline dma_addr_t dma_map_single(struct device *dev, - void *ptr, size_t size, - enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return virt_to_phys(ptr); -#endif - dma_cache_sync(dev, ptr, size, dir); - - return virt_to_phys(ptr); -} - -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nents; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - } - - return nents; -} - -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ - return dma_map_single(dev, page_address(page) + offset, size, dir); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction dir) -{ - dma_unmap_single(dev, dma_address, size, dir); -} - -static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); -} - -static inline void dma_sync_single_range(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction dir) -{ -#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) - if (dev->bus == &pci_bus_type) - return; -#endif - dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); -} - -static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction dir) -{ - int i; - - for (i = 0; i < nelems; i++) { -#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); -#endif - sg[i].dma_address = sg_phys(&sg[i]); - } -} - -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - dma_sync_single(dev, dma_handle, size, dir); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction dir) -{ - dma_sync_single(dev, dma_handle, size, dir); -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, - size_t size, - enum dma_data_direction direction) -{ - dma_sync_single_for_device(dev, dma_handle+offset, size, direction); -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - dma_sync_sg(dev, sg, nelems, dir); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction dir) -{ - dma_sync_sg(dev, sg, nelems, dir); -} - -static inline int dma_get_cache_alignment(void) -{ - /* - * Each processor family will define its own L1_CACHE_SHIFT, - * L1_CACHE_BYTES wraps to this, so this is always safe. - */ - return L1_CACHE_BYTES; -} - -static inline int dma_mapping_error(dma_addr_t dma_addr) -{ - return dma_addr == 0; -} - -#endif /* __ASM_SH_DMA_MAPPING_H */ - diff --git a/include/asm-sh64/dma.h b/include/asm-sh64/dma.h deleted file mode 100644 index e701f39470a..00000000000 --- a/include/asm-sh64/dma.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef __ASM_SH64_DMA_H -#define __ASM_SH64_DMA_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/dma.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ - -#include -#include -#include - -#define MAX_DMA_CHANNELS 4 - -/* - * SH5 can DMA in any memory area. - * - * The static definition is dodgy because it should limit - * the highest DMA-able address based on the actual - * Physical memory available. This is actually performed - * at run time in defining the memory allowed to DMA_ZONE. - */ -#define MAX_DMA_ADDRESS ~(NPHYS_MASK) - -#define DMA_MODE_READ 0 -#define DMA_MODE_WRITE 1 - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* __ASM_SH64_DMA_H */ diff --git a/include/asm-sh64/elf.h b/include/asm-sh64/elf.h deleted file mode 100644 index f994286e199..00000000000 --- a/include/asm-sh64/elf.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef __ASM_SH64_ELF_H -#define __ASM_SH64_ELF_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/elf.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* - * ELF register definitions.. - */ - -#include -#include -#include - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpu_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ( (x)->e_machine == EM_SH ) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __LITTLE_ENDIAN__ -#define ELF_DATA ELFDATA2LSB -#else -#define ELF_DATA ELFDATA2MSB -#endif -#define ELF_ARCH EM_SH - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - -#define R_SH_DIR32 1 -#define R_SH_REL32 2 -#define R_SH_IMM_LOW16 246 -#define R_SH_IMM_LOW16_PCREL 247 -#define R_SH_IMM_MEDLOW16 248 -#define R_SH_IMM_MEDLOW16_PCREL 249 - -#define ELF_CORE_COPY_REGS(_dest,_regs) \ - memcpy((char *) &_dest, (char *) _regs, \ - sizeof(struct pt_regs)); - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (NULL) - -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ - _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ - _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ - _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ - _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ - _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ - _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ - _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ - _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ - _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ - _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ - _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ - _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ - _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ - _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ - _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ - _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ - _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ - _r->sr = SR_FD | SR_MMU; } while (0) - -#ifdef __KERNEL__ -#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) -#endif - -#endif /* __ASM_SH64_ELF_H */ diff --git a/include/asm-sh64/emergency-restart.h b/include/asm-sh64/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-sh64/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-sh64/errno.h b/include/asm-sh64/errno.h deleted file mode 100644 index 57b46d4bdd4..00000000000 --- a/include/asm-sh64/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_ERRNO_H -#define __ASM_SH64_ERRNO_H - -#include - -#endif /* __ASM_SH64_ERRNO_H */ diff --git a/include/asm-sh64/fb.h b/include/asm-sh64/fb.h deleted file mode 100644 index d92e99cd8c8..00000000000 --- a/include/asm-sh64/fb.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-sh64/fcntl.h b/include/asm-sh64/fcntl.h deleted file mode 100644 index 744dd79b9d5..00000000000 --- a/include/asm-sh64/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh64/futex.h b/include/asm-sh64/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/include/asm-sh64/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/include/asm-sh64/gpio.h b/include/asm-sh64/gpio.h deleted file mode 100644 index 6bc5a13d841..00000000000 --- a/include/asm-sh64/gpio.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH64_GPIO_H -#define __ASM_SH64_GPIO_H - -/* - * This is just a stub, so that every arch using sh-sci has a gpio.h - */ - -#endif /* __ASM_SH64_GPIO_H */ diff --git a/include/asm-sh64/hardirq.h b/include/asm-sh64/hardirq.h deleted file mode 100644 index 555fd7a3510..00000000000 --- a/include/asm-sh64/hardirq.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_SH64_HARDIRQ_H -#define __ASM_SH64_HARDIRQ_H - -#include -#include - -/* entry.S is sensitive to the offsets of these fields */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -/* arch/sh64/kernel/irq.c */ -extern void ack_bad_irq(unsigned int irq); - -#endif /* __ASM_SH64_HARDIRQ_H */ - diff --git a/include/asm-sh64/hw_irq.h b/include/asm-sh64/hw_irq.h deleted file mode 100644 index ebb39089b0a..00000000000 --- a/include/asm-sh64/hw_irq.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_SH64_HW_IRQ_H -#define __ASM_SH64_HW_IRQ_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/hw_irq.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#endif /* __ASM_SH64_HW_IRQ_H */ diff --git a/include/asm-sh64/ide.h b/include/asm-sh64/ide.h deleted file mode 100644 index b6e31e8b941..00000000000 --- a/include/asm-sh64/ide.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-sh64/ide.h - * - * Copyright (C) 1994-1996 Linus Torvalds & authors - * - * sh64 version by Richard Curnow & Paul Mundt - */ - -/* - * This file contains the sh64 architecture specific IDE code. - */ - -#ifndef __ASM_SH64_IDE_H -#define __ASM_SH64_IDE_H - -#ifdef __KERNEL__ - - -/* Without this, the initialisation of PCI IDE cards end up calling - * ide_init_hwif_ports, which won't work. */ -#ifdef CONFIG_BLK_DEV_IDEPCI -#define ide_default_io_ctl(base) (0) -#endif - -#include - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_IDE_H */ diff --git a/include/asm-sh64/ioctl.h b/include/asm-sh64/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-sh64/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh64/ioctls.h b/include/asm-sh64/ioctls.h deleted file mode 100644 index 6b0c04f63c5..00000000000 --- a/include/asm-sh64/ioctls.h +++ /dev/null @@ -1,116 +0,0 @@ -#ifndef __ASM_SH64_IOCTLS_H -#define __ASM_SH64_IOCTLS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/ioctls.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 Richard Curnow - * - */ - -#include - -#define FIOCLEX 0x6601 /* _IO('f', 1) */ -#define FIONCLEX 0x6602 /* _IO('f', 2) */ -#define FIOASYNC 0x4004667d /* _IOW('f', 125, int) */ -#define FIONBIO 0x4004667e /* _IOW('f', 126, int) */ -#define FIONREAD 0x8004667f /* _IOW('f', 127, int) */ -#define TIOCINQ FIONREAD -#define FIOQSIZE 0x80086680 /* _IOR('f', 128, loff_t) */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ -#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ -#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ -#define TCSETAF 0x4012741c /* _IOW('t', 28, struct termio) */ - -#define TCSBRK 0x741d /* _IO('t', 29) */ -#define TCXONC 0x741e /* _IO('t', 30) */ -#define TCFLSH 0x741f /* _IO('t', 31) */ - -#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ -#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ -#define TIOCSTART 0x746e /* _IO('t', 110) start output, like ^Q */ -#define TIOCSTOP 0x746f /* _IO('t', 111) stop output, like ^S */ -#define TIOCOUTQ 0x80047473 /* _IOR('t', 115, int) output queue size */ - -#define TIOCSPGRP 0x40047476 /* _IOW('t', 118, int) */ -#define TIOCGPGRP 0x80047477 /* _IOR('t', 119, int) */ - -#define TIOCEXCL 0x540c /* _IO('T', 12) */ -#define TIOCNXCL 0x540d /* _IO('T', 13) */ -#define TIOCSCTTY 0x540e /* _IO('T', 14) */ - -#define TIOCSTI 0x40015412 /* _IOW('T', 18, char) 0x5412 */ -#define TIOCMGET 0x80045415 /* _IOR('T', 21, unsigned int) 0x5415 */ -#define TIOCMBIS 0x40045416 /* _IOW('T', 22, unsigned int) 0x5416 */ -#define TIOCMBIC 0x40045417 /* _IOW('T', 23, unsigned int) 0x5417 */ -#define TIOCMSET 0x40045418 /* _IOW('T', 24, unsigned int) 0x5418 */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR 0x80045419 /* _IOR('T', 25, unsigned int) 0x5419 */ -#define TIOCSSOFTCAR 0x4004541a /* _IOW('T', 26, unsigned int) 0x541A */ -#define TIOCLINUX 0x4004541c /* _IOW('T', 28, char) 0x541C */ -#define TIOCCONS 0x541d /* _IO('T', 29) */ -#define TIOCGSERIAL 0x803c541e /* _IOR('T', 30, struct serial_struct) 0x541E */ -#define TIOCSSERIAL 0x403c541f /* _IOW('T', 31, struct serial_struct) 0x541F */ -#define TIOCPKT 0x40045420 /* _IOW('T', 32, int) 0x5420 */ - -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - - -#define TIOCNOTTY 0x5422 /* _IO('T', 34) */ -#define TIOCSETD 0x40045423 /* _IOW('T', 35, int) 0x5423 */ -#define TIOCGETD 0x80045424 /* _IOR('T', 36, int) 0x5424 */ -#define TCSBRKP 0x40045424 /* _IOW('T', 37, int) 0x5425 */ /* Needed for POSIX tcsendbreak() */ -#define TIOCTTYGSTRUCT 0x8c105426 /* _IOR('T', 38, struct tty_struct) 0x5426 */ /* For debugging only */ -#define TIOCSBRK 0x5427 /* _IO('T', 39) */ /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* _IO('T', 40) */ /* BSD compatibility */ -#define TIOCGSID 0x80045429 /* _IOR('T', 41, pid_t) 0x5429 */ /* Return the session ID of FD */ -#define TIOCGPTN 0x80045430 /* _IOR('T',0x30, unsigned int) 0x5430 Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK 0x40045431 /* _IOW('T',0x31, int) Lock/unlock Pty */ - -#define TIOCSERCONFIG 0x5453 /* _IO('T', 83) */ -#define TIOCSERGWILD 0x80045454 /* _IOR('T', 84, int) 0x5454 */ -#define TIOCSERSWILD 0x40045455 /* _IOW('T', 85, int) 0x5455 */ -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ -#define TIOCSERGETLSR 0x80045459 /* _IOR('T', 89, unsigned int) 0x5459 */ /* Get line status register */ - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#define TIOCSERGETMULTI 0x80a8545a /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ -#define TIOCSERSETMULTI 0x40a8545b /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ - -#define TIOCMIWAIT 0x545c /* _IO('T', 92) wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545d /* read serial port inline interrupt counts */ - -#endif /* __ASM_SH64_IOCTLS_H */ diff --git a/include/asm-sh64/ipcbuf.h b/include/asm-sh64/ipcbuf.h deleted file mode 100644 index c441e35299c..00000000000 --- a/include/asm-sh64/ipcbuf.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH64_IPCBUF_H__ -#define __ASM_SH64_IPCBUF_H__ - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/ipcbuf.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* - * The ipc64_perm structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_SH64_IPCBUF_H__ */ diff --git a/include/asm-sh64/irq_regs.h b/include/asm-sh64/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-sh64/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh64/kdebug.h b/include/asm-sh64/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/include/asm-sh64/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh64/kmap_types.h b/include/asm-sh64/kmap_types.h deleted file mode 100644 index 2ae7c758791..00000000000 --- a/include/asm-sh64/kmap_types.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH64_KMAP_TYPES_H -#define __ASM_SH64_KMAP_TYPES_H - -#include - -#endif /* __ASM_SH64_KMAP_TYPES_H */ - diff --git a/include/asm-sh64/linkage.h b/include/asm-sh64/linkage.h deleted file mode 100644 index 1dd0e84a228..00000000000 --- a/include/asm-sh64/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH64_LINKAGE_H -#define __ASM_SH64_LINKAGE_H - -#include - -#endif /* __ASM_SH64_LINKAGE_H */ - diff --git a/include/asm-sh64/local.h b/include/asm-sh64/local.h deleted file mode 100644 index d9bd95dd36e..00000000000 --- a/include/asm-sh64/local.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH64_LOCAL_H -#define __ASM_SH64_LOCAL_H - -#include - -#endif /* __ASM_SH64_LOCAL_H */ - diff --git a/include/asm-sh64/mc146818rtc.h b/include/asm-sh64/mc146818rtc.h deleted file mode 100644 index 6cd3aec68db..00000000000 --- a/include/asm-sh64/mc146818rtc.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * linux/include/asm-sh64/mc146818rtc.h - * -*/ - -/* For now, an empty place-holder to get IDE to compile. */ - diff --git a/include/asm-sh64/mman.h b/include/asm-sh64/mman.h deleted file mode 100644 index a9be6d885c3..00000000000 --- a/include/asm-sh64/mman.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_MMAN_H -#define __ASM_SH64_MMAN_H - -#include - -#endif /* __ASM_SH64_MMAN_H */ diff --git a/include/asm-sh64/mmu.h b/include/asm-sh64/mmu.h deleted file mode 100644 index ccd36d26615..00000000000 --- a/include/asm-sh64/mmu.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_t; - -#endif diff --git a/include/asm-sh64/module.h b/include/asm-sh64/module.h deleted file mode 100644 index c313650d3d9..00000000000 --- a/include/asm-sh64/module.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH64_MODULE_H -#define __ASM_SH64_MODULE_H -/* - * This file contains the SH architecture specific module code. - */ - -struct mod_arch_specific { - /* empty */ -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -#define module_map(x) vmalloc(x) -#define module_unmap(x) vfree(x) -#define module_arch_init(x) (0) -#define arch_init_modules(x) do { } while (0) - -#endif /* __ASM_SH64_MODULE_H */ diff --git a/include/asm-sh64/msgbuf.h b/include/asm-sh64/msgbuf.h deleted file mode 100644 index cf0494ce0ba..00000000000 --- a/include/asm-sh64/msgbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __ASM_SH64_MSGBUF_H -#define __ASM_SH64_MSGBUF_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/msgbuf.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* - * The msqid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* __ASM_SH64_MSGBUF_H */ diff --git a/include/asm-sh64/mutex.h b/include/asm-sh64/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/include/asm-sh64/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-sh64/namei.h b/include/asm-sh64/namei.h deleted file mode 100644 index 99d759a805c..00000000000 --- a/include/asm-sh64/namei.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ASM_SH64_NAMEI_H -#define __ASM_SH64_NAMEI_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/namei.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * Included from linux/fs/namei.c - * - */ - -/* This dummy routine maybe changed to something useful - * for /usr/gnemul/ emulation stuff. - * Look at asm-sparc/namei.h for details. - */ - -#define __emul_prefix() NULL - -#endif /* __ASM_SH64_NAMEI_H */ diff --git a/include/asm-sh64/page.h b/include/asm-sh64/page.h deleted file mode 100644 index 472089aefc6..00000000000 --- a/include/asm-sh64/page.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef __ASM_SH64_PAGE_H -#define __ASM_SH64_PAGE_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/page.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * benedict.gaster@superh.com 19th, 24th July 2002. - * - * Modified to take account of enabling for D-CACHE support. - * - */ - - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE 4096 -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PTE_MASK PAGE_MASK - -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define HPAGE_SHIFT 16 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define HPAGE_SHIFT 20 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define HPAGE_SHIFT 29 -#endif - -#ifdef CONFIG_HUGETLB_PAGE -#define HPAGE_SIZE (1UL << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE-1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) -#define ARCH_HAS_SETCLEAR_HUGE_PTE -#endif - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -extern struct page *mem_map; -extern void sh64_page_clear(void *page); -extern void sh64_page_copy(void *from, void *to); - -#define clear_page(page) sh64_page_clear(page) -#define copy_page(to,from) sh64_page_copy(from, to) - -#if defined(CONFIG_DCACHE_DISABLED) - -#define clear_user_page(page, vaddr, pg) clear_page(page) -#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) - -#else - -extern void clear_user_page(void *to, unsigned long address, struct page *pg); -extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg); - -#endif /* defined(CONFIG_DCACHE_DISABLED) */ - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#endif /* !__ASSEMBLY__ */ - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - -/* - * Kconfig defined. - */ -#define __MEMORY_START (CONFIG_MEMORY_START) -#define PAGE_OFFSET (CONFIG_CACHED_MEMORY_OFFSET) - -#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) -#define MAP_NR(addr) ((__pa(addr)-__MEMORY_START) >> PAGE_SHIFT) -#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) - -#define phys_to_page(phys) (mem_map + (((phys) - __MEMORY_START) >> PAGE_SHIFT)) -#define page_to_phys(page) (((page - mem_map) << PAGE_SHIFT) + __MEMORY_START) - -/* PFN start number, because of __MEMORY_START */ -#define PFN_START (__MEMORY_START >> PAGE_SHIFT) -#define ARCH_PFN_OFFSET (PFN_START) -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define pfn_valid(pfn) (((pfn) - PFN_START) < max_mapnr) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include -#include - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH64_PAGE_H */ diff --git a/include/asm-sh64/param.h b/include/asm-sh64/param.h deleted file mode 100644 index f409adb4154..00000000000 --- a/include/asm-sh64/param.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/param.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ -#ifndef __ASM_SH64_PARAM_H -#define __ASM_SH64_PARAM_H - - -#ifdef __KERNEL__ -# ifdef CONFIG_SH_WDT -# define HZ 1000 /* Needed for high-res WOVF */ -# else -# define HZ 100 -# endif -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NGROUPS -#define NGROUPS 32 -#endif - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* __ASM_SH64_PARAM_H */ diff --git a/include/asm-sh64/percpu.h b/include/asm-sh64/percpu.h deleted file mode 100644 index a01d16cd0e8..00000000000 --- a/include/asm-sh64/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_PERCPU -#define __ASM_SH64_PERCPU - -#include - -#endif /* __ASM_SH64_PERCPU */ diff --git a/include/asm-sh64/pgalloc.h b/include/asm-sh64/pgalloc.h deleted file mode 100644 index 6eccab770a6..00000000000 --- a/include/asm-sh64/pgalloc.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef __ASM_SH64_PGALLOC_H -#define __ASM_SH64_PGALLOC_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/pgalloc.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - */ - -#include -#include -#include - -static inline void pgd_init(unsigned long page) -{ - unsigned long *pgd = (unsigned long *)page; - extern pte_t empty_bad_pte_table[PTRS_PER_PTE]; - int i; - - for (i = 0; i < USER_PTRS_PER_PGD; i++) - pgd[i] = (unsigned long)empty_bad_pte_table; -} - -/* - * Allocate and free page tables. The xxx_kernel() versions are - * used to allocate a kernel page table - this turns on ASN bits - * if any. - */ - -static inline pgd_t *get_pgd_slow(void) -{ - unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t)); - pgd_t *ret = kmalloc(pgd_size, GFP_KERNEL); - return ret; -} - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -static inline void pgd_free(pgd_t *pgd) -{ - quicklist_free(0, NULL, pgd); -} - -static inline struct page *pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - void *pg = quicklist_alloc(0, GFP_KERNEL, NULL); - return pg ? virt_to_page(pg) : NULL; -} - -static inline void pte_free_kernel(pte_t *pte) -{ - quicklist_free(0, NULL, pte); -} - -static inline void pte_free(struct page *pte) -{ - quicklist_free_page(0, NULL, pte); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte)) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - */ - -#if defined(CONFIG_SH64_PGTABLE_2_LEVEL) - -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(x) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() -#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte)) -#define __pmd_free_tlb(tlb,pmd) do { } while (0) - -#elif defined(CONFIG_SH64_PGTABLE_3_LEVEL) - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) -{ - return quicklist_alloc(0, GFP_KERNEL, NULL); -} - -static inline void pmd_free(pmd_t *pmd) -{ - quicklist_free(0, NULL, pmd); -} - -#define pgd_populate(mm, pgd, pmd) pgd_set(pgd, pmd) -#define __pmd_free_tlb(tlb,pmd) pmd_free(pmd) - -#else -#error "No defined page table size" -#endif - -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) (pte))) - -static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, - struct page *pte) -{ - set_pmd(pmd, __pmd(_PAGE_TABLE + (unsigned long) page_address (pte))); -} - -static inline void check_pgt_cache(void) -{ - quicklist_trim(0, NULL, 25, 16); -} - -#endif /* __ASM_SH64_PGALLOC_H */ diff --git a/include/asm-sh64/poll.h b/include/asm-sh64/poll.h deleted file mode 100644 index ca2950267c5..00000000000 --- a/include/asm-sh64/poll.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH64_POLL_H -#define __ASM_SH64_POLL_H - -#include - -#undef POLLREMOVE - -#endif /* __ASM_SH64_POLL_H */ diff --git a/include/asm-sh64/posix_types.h b/include/asm-sh64/posix_types.h deleted file mode 100644 index 0620317a6f0..00000000000 --- a/include/asm-sh64/posix_types.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __ASM_SH64_POSIX_TYPES_H -#define __ASM_SH64_POSIX_TYPES_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/posix_types.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef long unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/include/asm-sh64/ptrace.h b/include/asm-sh64/ptrace.h deleted file mode 100644 index c424f80e3ae..00000000000 --- a/include/asm-sh64/ptrace.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __ASM_SH64_PTRACE_H -#define __ASM_SH64_PTRACE_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/ptrace.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_regs { - unsigned long long pc; - unsigned long long sr; - unsigned long long syscall_nr; - unsigned long long regs[63]; - unsigned long long tregs[8]; - unsigned long long pad[2]; -}; - -#ifdef __KERNEL__ -#define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) ((unsigned long)instruction_pointer(regs)) -extern void show_regs(struct pt_regs *); -#endif - -#endif /* __ASM_SH64_PTRACE_H */ diff --git a/include/asm-sh64/resource.h b/include/asm-sh64/resource.h deleted file mode 100644 index 8ff93944ae6..00000000000 --- a/include/asm-sh64/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_RESOURCE_H -#define __ASM_SH64_RESOURCE_H - -#include - -#endif /* __ASM_SH64_RESOURCE_H */ diff --git a/include/asm-sh64/scatterlist.h b/include/asm-sh64/scatterlist.h deleted file mode 100644 index 7f729bbfce4..00000000000 --- a/include/asm-sh64/scatterlist.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/scatterlist.h - * - * Copyright (C) 2003 Paul Mundt - * - */ -#ifndef __ASM_SH64_SCATTERLIST_H -#define __ASM_SH64_SCATTERLIST_H - -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; - -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - -#define ISA_DMA_THRESHOLD (0xffffffff) - -#endif /* !__ASM_SH64_SCATTERLIST_H */ diff --git a/include/asm-sh64/sci.h b/include/asm-sh64/sci.h deleted file mode 100644 index 793c568b782..00000000000 --- a/include/asm-sh64/sci.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh64/sections.h b/include/asm-sh64/sections.h deleted file mode 100644 index 897f36bcdf8..00000000000 --- a/include/asm-sh64/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH64_SECTIONS_H -#define __ASM_SH64_SECTIONS_H - -#include - -#endif /* __ASM_SH64_SECTIONS_H */ - diff --git a/include/asm-sh64/segment.h b/include/asm-sh64/segment.h deleted file mode 100644 index 92ac001fc48..00000000000 --- a/include/asm-sh64/segment.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_SEGMENT_H -#define _ASM_SEGMENT_H - -/* Only here because we have some old header files that expect it.. */ - -#endif /* _ASM_SEGMENT_H */ diff --git a/include/asm-sh64/semaphore-helper.h b/include/asm-sh64/semaphore-helper.h deleted file mode 100644 index fcfafe263e8..00000000000 --- a/include/asm-sh64/semaphore-helper.h +++ /dev/null @@ -1,101 +0,0 @@ -#ifndef __ASM_SH64_SEMAPHORE_HELPER_H -#define __ASM_SH64_SEMAPHORE_HELPER_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/semaphore-helper.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ -#include - -/* - * SMP- and interrupt-safe semaphores helper functions. - * - * (C) Copyright 1996 Linus Torvalds - * (C) Copyright 1999 Andrea Arcangeli - */ - -/* - * These two _must_ execute atomically wrt each other. - * - * This is trivially done with load_locked/store_cond, - * which we have. Let the rest of the losers suck eggs. - */ -static __inline__ void wake_one_more(struct semaphore * sem) -{ - atomic_inc((atomic_t *)&sem->sleepers); -} - -static __inline__ int waking_non_zero(struct semaphore *sem) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (sem->sleepers > 0) { - sem->sleepers--; - ret = 1; - } - spin_unlock_irqrestore(&semaphore_wake_lock, flags); - return ret; -} - -/* - * waking_non_zero_interruptible: - * 1 got the lock - * 0 go to sleep - * -EINTR interrupted - * - * We must undo the sem->count down_interruptible() increment while we are - * protected by the spinlock in order to make atomic this atomic_inc() with the - * atomic_read() in wake_one_more(), otherwise we can race. -arca - */ -static __inline__ int waking_non_zero_interruptible(struct semaphore *sem, - struct task_struct *tsk) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (sem->sleepers > 0) { - sem->sleepers--; - ret = 1; - } else if (signal_pending(tsk)) { - atomic_inc(&sem->count); - ret = -EINTR; - } - spin_unlock_irqrestore(&semaphore_wake_lock, flags); - return ret; -} - -/* - * waking_non_zero_trylock: - * 1 failed to lock - * 0 got the lock - * - * We must undo the sem->count down_trylock() increment while we are - * protected by the spinlock in order to make atomic this atomic_inc() with the - * atomic_read() in wake_one_more(), otherwise we can race. -arca - */ -static __inline__ int waking_non_zero_trylock(struct semaphore *sem) -{ - unsigned long flags; - int ret = 1; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (sem->sleepers <= 0) - atomic_inc(&sem->count); - else { - sem->sleepers--; - ret = 0; - } - spin_unlock_irqrestore(&semaphore_wake_lock, flags); - return ret; -} - -#endif /* __ASM_SH64_SEMAPHORE_HELPER_H */ diff --git a/include/asm-sh64/semaphore.h b/include/asm-sh64/semaphore.h deleted file mode 100644 index f027cc14b55..00000000000 --- a/include/asm-sh64/semaphore.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef __ASM_SH64_SEMAPHORE_H -#define __ASM_SH64_SEMAPHORE_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/semaphore.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * SMP- and interrupt-safe semaphores. - * - * (C) Copyright 1996 Linus Torvalds - * - * SuperH verison by Niibe Yutaka - * (Currently no asm implementation but generic C code...) - * - */ - -#include -#include -#include -#include - -#include -#include - -struct semaphore { - atomic_t count; - int sleepers; - wait_queue_head_t wait; -}; - -#define __SEMAPHORE_INITIALIZER(name, n) \ -{ \ - .count = ATOMIC_INIT(n), \ - .sleepers = 0, \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ -} - -#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ - struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) - -#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) - -static inline void sema_init (struct semaphore *sem, int val) -{ -/* - * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val); - * - * i'd rather use the more flexible initialization above, but sadly - * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well. - */ - atomic_set(&sem->count, val); - sem->sleepers = 0; - init_waitqueue_head(&sem->wait); -} - -static inline void init_MUTEX (struct semaphore *sem) -{ - sema_init(sem, 1); -} - -static inline void init_MUTEX_LOCKED (struct semaphore *sem) -{ - sema_init(sem, 0); -} - -#if 0 -asmlinkage void __down_failed(void /* special register calling convention */); -asmlinkage int __down_failed_interruptible(void /* params in registers */); -asmlinkage int __down_failed_trylock(void /* params in registers */); -asmlinkage void __up_wakeup(void /* special register calling convention */); -#endif - -asmlinkage void __down(struct semaphore * sem); -asmlinkage int __down_interruptible(struct semaphore * sem); -asmlinkage int __down_trylock(struct semaphore * sem); -asmlinkage void __up(struct semaphore * sem); - -extern spinlock_t semaphore_wake_lock; - -static inline void down(struct semaphore * sem) -{ - if (atomic_dec_return(&sem->count) < 0) - __down(sem); -} - -static inline int down_interruptible(struct semaphore * sem) -{ - int ret = 0; - - if (atomic_dec_return(&sem->count) < 0) - ret = __down_interruptible(sem); - return ret; -} - -static inline int down_trylock(struct semaphore * sem) -{ - int ret = 0; - - if (atomic_dec_return(&sem->count) < 0) - ret = __down_trylock(sem); - return ret; -} - -/* - * Note! This is subtle. We jump to wake people up only if - * the semaphore was negative (== somebody was waiting on it). - */ -static inline void up(struct semaphore * sem) -{ - if (atomic_inc_return(&sem->count) <= 0) - __up(sem); -} - -#endif /* __ASM_SH64_SEMAPHORE_H */ diff --git a/include/asm-sh64/sembuf.h b/include/asm-sh64/sembuf.h deleted file mode 100644 index ec4d9f14357..00000000000 --- a/include/asm-sh64/sembuf.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __ASM_SH64_SEMBUF_H -#define __ASM_SH64_SEMBUF_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/sembuf.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* - * The semid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH64_SEMBUF_H */ diff --git a/include/asm-sh64/serial.h b/include/asm-sh64/serial.h deleted file mode 100644 index e8d7b3f2da5..00000000000 --- a/include/asm-sh64/serial.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-sh64/serial.h - * - * Configuration details for 8250, 16450, 16550, etc. serial ports - */ - -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -#define RS_TABLE_SIZE 2 - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS } /* ttyS1 */ - -/* XXX: This should be moved ino irq.h */ -#define irq_cannonicalize(x) (x) - -#endif /* _ASM_SERIAL_H */ diff --git a/include/asm-sh64/setup.h b/include/asm-sh64/setup.h deleted file mode 100644 index 5b07b14c292..00000000000 --- a/include/asm-sh64/setup.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __ASM_SH64_SETUP_H -#define __ASM_SH64_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#ifdef __KERNEL__ - -#define PARAM ((unsigned char *)empty_zero_page) -#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) -#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) -#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) -#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) -#define INITRD_START (*(unsigned long *) (PARAM+0x010)) -#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) - -#define COMMAND_LINE ((char *) (PARAM+256)) -#define COMMAND_LINE_SIZE 256 - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_SETUP_H */ - diff --git a/include/asm-sh64/shmbuf.h b/include/asm-sh64/shmbuf.h deleted file mode 100644 index 022f3494dd6..00000000000 --- a/include/asm-sh64/shmbuf.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef __ASM_SH64_SHMBUF_H -#define __ASM_SH64_SHMBUF_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/shmbuf.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* - * The shmid64_ds structure for i386 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_SH64_SHMBUF_H */ diff --git a/include/asm-sh64/shmparam.h b/include/asm-sh64/shmparam.h deleted file mode 100644 index 1bb820c833e..00000000000 --- a/include/asm-sh64/shmparam.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_SH64_SHMPARAM_H -#define __ASM_SH64_SHMPARAM_H - -/* - * Set this to a sensible safe default, we'll work out the specifics for the - * align mask from the cache descriptor at run-time. - */ -#define SHMLBA 0x4000 - -#define __ARCH_FORCE_SHMLBA - -#endif /* __ASM_SH64_SHMPARAM_H */ diff --git a/include/asm-sh64/sigcontext.h b/include/asm-sh64/sigcontext.h deleted file mode 100644 index 6293509d8cc..00000000000 --- a/include/asm-sh64/sigcontext.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __ASM_SH64_SIGCONTEXT_H -#define __ASM_SH64_SIGCONTEXT_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/sigcontext.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long long sc_regs[63]; - unsigned long long sc_tregs[8]; - unsigned long long sc_pc; - unsigned long long sc_sr; - - /* FPU registers */ - unsigned long long sc_fpregs[32]; - unsigned int sc_fpscr; - unsigned int sc_fpvalid; -}; - -#endif /* __ASM_SH64_SIGCONTEXT_H */ diff --git a/include/asm-sh64/siginfo.h b/include/asm-sh64/siginfo.h deleted file mode 100644 index 56ef1da534d..00000000000 --- a/include/asm-sh64/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_SIGINFO_H -#define __ASM_SH64_SIGINFO_H - -#include - -#endif /* __ASM_SH64_SIGINFO_H */ diff --git a/include/asm-sh64/signal.h b/include/asm-sh64/signal.h deleted file mode 100644 index 244e134730d..00000000000 --- a/include/asm-sh64/signal.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef __ASM_SH64_SIGNAL_H -#define __ASM_SH64_SIGNAL_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/signal.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ THREAD_SIZE - -#include - -#ifdef __KERNEL__ -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -#include - -#define sigmask(sig) (1UL << ((sig) - 1)) -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_SIGNAL_H */ diff --git a/include/asm-sh64/smp.h b/include/asm-sh64/smp.h deleted file mode 100644 index 4a4d0da39a8..00000000000 --- a/include/asm-sh64/smp.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_SH64_SMP_H -#define __ASM_SH64_SMP_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/smp.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#endif /* __ASM_SH64_SMP_H */ diff --git a/include/asm-sh64/socket.h b/include/asm-sh64/socket.h deleted file mode 100644 index 1853f7246ab..00000000000 --- a/include/asm-sh64/socket.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_SOCKET_H -#define __ASM_SH64_SOCKET_H - -#include - -#endif /* __ASM_SH64_SOCKET_H */ diff --git a/include/asm-sh64/sockios.h b/include/asm-sh64/sockios.h deleted file mode 100644 index 419e76f12f4..00000000000 --- a/include/asm-sh64/sockios.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __ASM_SH64_SOCKIOS_H -#define __ASM_SH64_SOCKIOS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/sockios.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -/* Socket-level I/O control calls. */ -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ -#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ -#endif /* __ASM_SH64_SOCKIOS_H */ diff --git a/include/asm-sh64/spinlock.h b/include/asm-sh64/spinlock.h deleted file mode 100644 index 296b0c9b24a..00000000000 --- a/include/asm-sh64/spinlock.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH64_SPINLOCK_H -#define __ASM_SH64_SPINLOCK_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/spinlock.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#error "No SMP on SH64" - -#endif /* __ASM_SH64_SPINLOCK_H */ diff --git a/include/asm-sh64/stat.h b/include/asm-sh64/stat.h deleted file mode 100644 index 86f551b1987..00000000000 --- a/include/asm-sh64/stat.h +++ /dev/null @@ -1,88 +0,0 @@ -#ifndef __ASM_SH64_STAT_H -#define __ASM_SH64_STAT_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/stat.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned short st_dev; - unsigned char __pad0[10]; - - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned short st_rdev; - unsigned char __pad3[10]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __ASM_SH64_STAT_H */ diff --git a/include/asm-sh64/statfs.h b/include/asm-sh64/statfs.h deleted file mode 100644 index 083fd79b241..00000000000 --- a/include/asm-sh64/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_STATFS_H -#define __ASM_SH64_STATFS_H - -#include - -#endif /* __ASM_SH64_STATFS_H */ diff --git a/include/asm-sh64/termbits.h b/include/asm-sh64/termbits.h deleted file mode 100644 index 86bde5ec141..00000000000 --- a/include/asm-sh64/termbits.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_TERMBITS_H -#define __ASM_SH64_TERMBITS_H - -#include - -#endif /* __ASM_SH64_TERMBITS_H */ diff --git a/include/asm-sh64/termios.h b/include/asm-sh64/termios.h deleted file mode 100644 index dc44e6ed3a7..00000000000 --- a/include/asm-sh64/termios.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __ASM_SH64_TERMIOS_H -#define __ASM_SH64_TERMIOS_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/termios.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_TERMIOS_H */ diff --git a/include/asm-sh64/timex.h b/include/asm-sh64/timex.h deleted file mode 100644 index 163e2b62fe2..00000000000 --- a/include/asm-sh64/timex.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ASM_SH64_TIMEX_H -#define __ASM_SH64_TIMEX_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/timex.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * sh-5 architecture timex specifications - * - */ - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ -#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ - -typedef unsigned long cycles_t; - -static __inline__ cycles_t get_cycles (void) -{ - return 0; -} - -#define vxtime_lock() do {} while (0) -#define vxtime_unlock() do {} while (0) - -#endif /* __ASM_SH64_TIMEX_H */ diff --git a/include/asm-sh64/tlbflush.h b/include/asm-sh64/tlbflush.h deleted file mode 100644 index 16a164a2375..00000000000 --- a/include/asm-sh64/tlbflush.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __ASM_SH64_TLBFLUSH_H -#define __ASM_SH64_TLBFLUSH_H - -#include - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(mm, start, end) flushes a range of pages - * - */ - -extern void flush_tlb(void); -extern void flush_tlb_all(void); -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); - -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); - -#endif /* __ASM_SH64_TLBFLUSH_H */ - diff --git a/include/asm-sh64/topology.h b/include/asm-sh64/topology.h deleted file mode 100644 index 34211787345..00000000000 --- a/include/asm-sh64/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH64_TOPOLOGY_H -#define __ASM_SH64_TOPOLOGY_H - -#include - -#endif /* __ASM_SH64_TOPOLOGY_H */ diff --git a/include/asm-sh64/types.h b/include/asm-sh64/types.h deleted file mode 100644 index 2c7ad73b388..00000000000 --- a/include/asm-sh64/types.h +++ /dev/null @@ -1,74 +0,0 @@ -#ifndef __ASM_SH64_TYPES_H -#define __ASM_SH64_TYPES_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/types.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - -#endif /* __ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -typedef __signed__ char s8; -typedef unsigned char u8; - -typedef __signed__ short s16; -typedef unsigned short u16; - -typedef __signed__ int s32; -typedef unsigned int u32; - -typedef __signed__ long long s64; -typedef unsigned long long u64; - -/* DMA addresses come in generic and 64-bit flavours. */ - -#ifdef CONFIG_HIGHMEM64G -typedef u64 dma_addr_t; -#else -typedef u32 dma_addr_t; -#endif -typedef u64 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_TYPES_H */ diff --git a/include/asm-sh64/ucontext.h b/include/asm-sh64/ucontext.h deleted file mode 100644 index cf77a08551c..00000000000 --- a/include/asm-sh64/ucontext.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __ASM_SH64_UCONTEXT_H -#define __ASM_SH64_UCONTEXT_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/ucontext.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* __ASM_SH64_UCONTEXT_H */ diff --git a/include/asm-sh64/unaligned.h b/include/asm-sh64/unaligned.h deleted file mode 100644 index 74481b186ae..00000000000 --- a/include/asm-sh64/unaligned.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_SH64_UNALIGNED_H -#define __ASM_SH64_UNALIGNED_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/unaligned.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#include - -#endif /* __ASM_SH64_UNALIGNED_H */ diff --git a/include/asm-sh64/user.h b/include/asm-sh64/user.h deleted file mode 100644 index eb3b33edd73..00000000000 --- a/include/asm-sh64/user.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH64_USER_H -#define __ASM_SH64_USER_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/user.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - -#include -#include -#include - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd). The file contents are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ - -struct user_fpu_struct { - unsigned long long fp_regs[32]; - unsigned int fpscr; -}; - -struct user { - struct pt_regs regs; /* entire machine state */ - struct user_fpu_struct fpu; /* Math Co-processor registers */ - int u_fpvalid; /* True if math co-processor being used */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - struct regs * u_ar0; /* help gdb find registers */ - struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* __ASM_SH64_USER_H */ -- cgit v1.2.3-70-g09d2 From 17bfa6397875e6901c3cafdc711437041664d94c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 17:28:37 +0900 Subject: sh: Special layout for SH-5 stat.h and user.h. Signed-off-by: Paul Mundt --- include/asm-sh/stat.h | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++- include/asm-sh/user.h | 7 ++++++ 2 files changed, 69 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/stat.h b/include/asm-sh/stat.h index 6d6ad26e3a2..e1810cc6e3d 100644 --- a/include/asm-sh/stat.h +++ b/include/asm-sh/stat.h @@ -15,6 +15,66 @@ struct __old_kernel_stat { unsigned long st_ctime; }; +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned short st_dev; + unsigned char __pad0[10]; + + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned short st_rdev; + unsigned char __pad3[10]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long __unused1; + unsigned long __unused2; +}; +#else struct stat { unsigned long st_dev; unsigned long st_ino; @@ -67,11 +127,12 @@ struct stat64 { unsigned long st_mtime_nsec; unsigned long st_ctime; - unsigned long st_ctime_nsec; + unsigned long st_ctime_nsec; unsigned long long st_ino; }; #define STAT_HAVE_NSEC 1 +#endif #endif /* __ASM_SH_STAT_H */ diff --git a/include/asm-sh/user.h b/include/asm-sh/user.h index d1b8511d9d9..706b1c7baba 100644 --- a/include/asm-sh/user.h +++ b/include/asm-sh/user.h @@ -27,12 +27,19 @@ * to write an integer number of pages. */ +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct user fpu_struct { + unsigned long fp_regs[32]; + unsigned int fpscr; +}; +#else struct user_fpu_struct { unsigned long fp_regs[16]; unsigned long xfp_regs[16]; unsigned long fpscr; unsigned long fpul; }; +#endif struct user { struct pt_regs regs; /* entire machine state */ -- cgit v1.2.3-70-g09d2 From fb8e569c1d4f44a4632e2db95a27ed45734d4705 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 17:55:12 +0900 Subject: sh: Fix up user_fpu_struct typo for SH-5. Signed-off-by: Paul Mundt --- arch/sh64/kernel/asm-offsets.c | 33 ---------- arch/sh64/kernel/init_task.c | 46 -------------- arch/sh64/kernel/semaphore.c | 140 ----------------------------------------- include/asm-sh/user.h | 2 +- 4 files changed, 1 insertion(+), 220 deletions(-) delete mode 100644 arch/sh64/kernel/asm-offsets.c delete mode 100644 arch/sh64/kernel/init_task.c delete mode 100644 arch/sh64/kernel/semaphore.c (limited to 'include') diff --git a/arch/sh64/kernel/asm-offsets.c b/arch/sh64/kernel/asm-offsets.c deleted file mode 100644 index ca76537c16c..00000000000 --- a/arch/sh64/kernel/asm-offsets.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - */ - -#include -#include -#include -#include - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -int main(void) -{ - /* offsets into the thread_info struct */ - DEFINE(TI_TASK, offsetof(struct thread_info, task)); - DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); - DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit)); - DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block)); - - return 0; -} diff --git a/arch/sh64/kernel/init_task.c b/arch/sh64/kernel/init_task.c deleted file mode 100644 index deee8bfd327..00000000000 --- a/arch/sh64/kernel/init_task.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/init_task.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); - -struct pt_regs fake_swapper_regs; - -/* - * Initial thread structure. - * - * We need to make sure that this is THREAD_SIZE-byte aligned due - * to the way process stacks are handled. This is done by having a - * special "init_task" linker map entry.. - */ -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = - { INIT_THREAD_INFO(init_task) }; - -/* - * Initial task structure. - * - * All other task structs will be allocated on slabs in fork.c - */ -struct task_struct init_task = INIT_TASK(init_task); - diff --git a/arch/sh64/kernel/semaphore.c b/arch/sh64/kernel/semaphore.c deleted file mode 100644 index 72c16533436..00000000000 --- a/arch/sh64/kernel/semaphore.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Just taken from alpha implementation. - * This can't work well, perhaps. - */ -/* - * Generic semaphore code. Buyer beware. Do your own - * specific changes in - */ - -#include -#include -#include -#include -#include -#include -#include - -spinlock_t semaphore_wake_lock; - -/* - * Semaphores are implemented using a two-way counter: - * The "count" variable is decremented for each process - * that tries to sleep, while the "waking" variable is - * incremented when the "up()" code goes to wake up waiting - * processes. - * - * Notably, the inline "up()" and "down()" functions can - * efficiently test if they need to do any extra work (up - * needs to do something only if count was negative before - * the increment operation. - * - * waking_non_zero() (from asm/semaphore.h) must execute - * atomically. - * - * When __up() is called, the count was negative before - * incrementing it, and we need to wake up somebody. - * - * This routine adds one to the count of processes that need to - * wake up and exit. ALL waiting processes actually wake up but - * only the one that gets to the "waking" field first will gate - * through and acquire the semaphore. The others will go back - * to sleep. - * - * Note that these functions are only called when there is - * contention on the lock, and as such all this is the - * "non-critical" part of the whole semaphore business. The - * critical part is the inline stuff in - * where we want to avoid any extra jumps and calls. - */ -void __up(struct semaphore *sem) -{ - wake_one_more(sem); - wake_up(&sem->wait); -} - -/* - * Perform the "down" function. Return zero for semaphore acquired, - * return negative for signalled out of the function. - * - * If called from __down, the return is ignored and the wait loop is - * not interruptible. This means that a task waiting on a semaphore - * using "down()" cannot be killed until someone does an "up()" on - * the semaphore. - * - * If called from __down_interruptible, the return value gets checked - * upon return. If the return value is negative then the task continues - * with the negative value in the return register (it can be tested by - * the caller). - * - * Either form may be used in conjunction with "up()". - * - */ - -#define DOWN_VAR \ - struct task_struct *tsk = current; \ - wait_queue_t wait; \ - init_waitqueue_entry(&wait, tsk); - -#define DOWN_HEAD(task_state) \ - \ - \ - tsk->state = (task_state); \ - add_wait_queue(&sem->wait, &wait); \ - \ - /* \ - * Ok, we're set up. sem->count is known to be less than zero \ - * so we must wait. \ - * \ - * We can let go the lock for purposes of waiting. \ - * We re-acquire it after awaking so as to protect \ - * all semaphore operations. \ - * \ - * If "up()" is called before we call waking_non_zero() then \ - * we will catch it right away. If it is called later then \ - * we will have to go through a wakeup cycle to catch it. \ - * \ - * Multiple waiters contend for the semaphore lock to see \ - * who gets to gate through and who has to wait some more. \ - */ \ - for (;;) { - -#define DOWN_TAIL(task_state) \ - tsk->state = (task_state); \ - } \ - tsk->state = TASK_RUNNING; \ - remove_wait_queue(&sem->wait, &wait); - -void __sched __down(struct semaphore * sem) -{ - DOWN_VAR - DOWN_HEAD(TASK_UNINTERRUPTIBLE) - if (waking_non_zero(sem)) - break; - schedule(); - DOWN_TAIL(TASK_UNINTERRUPTIBLE) -} - -int __sched __down_interruptible(struct semaphore * sem) -{ - int ret = 0; - DOWN_VAR - DOWN_HEAD(TASK_INTERRUPTIBLE) - - ret = waking_non_zero_interruptible(sem, tsk); - if (ret) - { - if (ret == 1) - /* ret != 0 only if we get interrupted -arca */ - ret = 0; - break; - } - schedule(); - DOWN_TAIL(TASK_INTERRUPTIBLE) - return ret; -} - -int __down_trylock(struct semaphore * sem) -{ - return waking_non_zero_trylock(sem); -} diff --git a/include/asm-sh/user.h b/include/asm-sh/user.h index 706b1c7baba..1a4f43c7512 100644 --- a/include/asm-sh/user.h +++ b/include/asm-sh/user.h @@ -28,7 +28,7 @@ */ #if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct user fpu_struct { +struct user_fpu_struct { unsigned long fp_regs[32]; unsigned int fpscr; }; -- cgit v1.2.3-70-g09d2 From 0f2c15cecee0ff00e4bfa91dd20b33ccd9285360 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 18:06:34 +0900 Subject: sh: Add onchip remap prototypes, kill old sh64 io.h. Signed-off-by: Paul Mundt --- include/asm-sh/io.h | 17 ++++- include/asm-sh64/io.h | 196 -------------------------------------------------- 2 files changed, 16 insertions(+), 197 deletions(-) delete mode 100644 include/asm-sh64/io.h (limited to 'include') diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 74305edceee..a4e5f5573ee 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -191,6 +191,8 @@ __BUILD_MEMORY_STRING(w, u16) #define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */ +#define IO_SPACE_LIMIT 0xffffffff + /* * This function provides a method for the generic case where a board-specific * ioport_map simply needs to return the port + some arbitrary port base. @@ -226,6 +228,11 @@ static inline unsigned int ctrl_inl(unsigned long addr) return *(volatile unsigned long*)addr; } +static inline unsigned long long ctrl_inq(unsigned long addr) +{ + return *(volatile unsigned long long*)addr; +} + static inline void ctrl_outb(unsigned char b, unsigned long addr) { *(volatile unsigned char*)addr = b; @@ -241,6 +248,11 @@ static inline void ctrl_outl(unsigned int b, unsigned long addr) *(volatile unsigned long*)addr = b; } +static inline void ctrl_outq(unsigned long long b, unsigned long addr) +{ + *(volatile unsigned long long*)addr = b; +} + static inline void ctrl_delay(void) { #ifdef P2SEG @@ -253,7 +265,10 @@ unsigned long long peek_real_address_q(unsigned long long addr); unsigned long long poke_real_address_q(unsigned long long addr, unsigned long long val); -#define IO_SPACE_LIMIT 0xffffffff +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); #if !defined(CONFIG_MMU) #define virt_to_phys(address) ((unsigned long)(address)) diff --git a/include/asm-sh64/io.h b/include/asm-sh64/io.h deleted file mode 100644 index 7bd7314d38c..00000000000 --- a/include/asm-sh64/io.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef __ASM_SH64_IO_H -#define __ASM_SH64_IO_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/io.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - */ - -/* - * Convention: - * read{b,w,l}/write{b,w,l} are for PCI, - * while in{b,w,l}/out{b,w,l} are for ISA - * These may (will) be platform specific function. - * - * In addition, we have - * ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. - * which are processor specific. Address should be the result of - * onchip_remap(); - */ - -#include -#include -#include -#include -#include - -/* - * Nothing overly special here.. instead of doing the same thing - * over and over again, we just define a set of sh64_in/out functions - * with an implicit size. The traditional read{b,w,l}/write{b,w,l} - * mess is wrapped to this, as are the SH-specific ctrl_in/out routines. - */ -static inline unsigned char sh64_in8(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short sh64_in16(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int sh64_in32(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *)addr; -} - -static inline unsigned long long sh64_in64(const volatile void __iomem *addr) -{ - return *(volatile unsigned long long __force *)addr; -} - -static inline void sh64_out8(unsigned char b, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)addr = b; - wmb(); -} - -static inline void sh64_out16(unsigned short b, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)addr = b; - wmb(); -} - -static inline void sh64_out32(unsigned int b, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)addr = b; - wmb(); -} - -static inline void sh64_out64(unsigned long long b, volatile void __iomem *addr) -{ - *(volatile unsigned long long __force *)addr = b; - wmb(); -} - -#define readb(addr) sh64_in8(addr) -#define readw(addr) sh64_in16(addr) -#define readl(addr) sh64_in32(addr) -#define readb_relaxed(addr) sh64_in8(addr) -#define readw_relaxed(addr) sh64_in16(addr) -#define readl_relaxed(addr) sh64_in32(addr) - -#define writeb(b, addr) sh64_out8(b, addr) -#define writew(b, addr) sh64_out16(b, addr) -#define writel(b, addr) sh64_out32(b, addr) - -#define ctrl_inb(addr) sh64_in8(ioport_map(addr, 1)) -#define ctrl_inw(addr) sh64_in16(ioport_map(addr, 2)) -#define ctrl_inl(addr) sh64_in32(ioport_map(addr, 4)) - -#define ctrl_outb(b, addr) sh64_out8(b, ioport_map(addr, 1)) -#define ctrl_outw(b, addr) sh64_out16(b, ioport_map(addr, 2)) -#define ctrl_outl(b, addr) sh64_out32(b, ioport_map(addr, 4)) - -#define ioread8(addr) sh64_in8(addr) -#define ioread16(addr) sh64_in16(addr) -#define ioread32(addr) sh64_in32(addr) -#define iowrite8(b, addr) sh64_out8(b, addr) -#define iowrite16(b, addr) sh64_out16(b, addr) -#define iowrite32(b, addr) sh64_out32(b, addr) - -#define inb(addr) ctrl_inb(addr) -#define inw(addr) ctrl_inw(addr) -#define inl(addr) ctrl_inl(addr) -#define outb(b, addr) ctrl_outb(b, addr) -#define outw(b, addr) ctrl_outw(b, addr) -#define outl(b, addr) ctrl_outl(b, addr) - -void outsw(unsigned long port, const void *addr, unsigned long count); -void insw(unsigned long port, void *addr, unsigned long count); -void outsl(unsigned long port, const void *addr, unsigned long count); -void insl(unsigned long port, void *addr, unsigned long count); - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -void memcpy_toio(void __iomem *to, const void *from, long count); -void memcpy_fromio(void *to, void __iomem *from, long count); - -#define mmiowb() - -#ifdef __KERNEL__ - -#ifdef CONFIG_SH_CAYMAN -extern unsigned long smsc_superio_virt; -#endif -#ifdef CONFIG_PCI -extern unsigned long pciio_virt; -#endif - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * Change virtual addresses to physical addresses and vv. - * These are trivial on the 1:1 Linux/SuperH mapping - */ -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa(address); -} - -static inline void * phys_to_virt(unsigned long address) -{ - return __va(address); -} - -extern void * __ioremap(unsigned long phys_addr, unsigned long size, - unsigned long flags); - -static inline void * ioremap(unsigned long phys_addr, unsigned long size) -{ - return __ioremap(phys_addr, size, 1); -} - -static inline void * ioremap_nocache (unsigned long phys_addr, unsigned long size) -{ - return __ioremap(phys_addr, size, 0); -} - -extern void iounmap(void *addr); - -unsigned long onchip_remap(unsigned long addr, unsigned long size, const char* name); -extern void onchip_unmap(unsigned long vaddr); - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH64_IO_H */ -- cgit v1.2.3-70-g09d2 From caead5ef34e5abdda8c5189cf698e0b863904701 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 22:53:34 +0900 Subject: sh: Kill off the last of the sh64 headers. Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh5/addrspace.h | 5 ++ include/asm-sh/cpu-sh5/irq.h | 144 +++++++++++++++++++++++++++++++++++++ include/asm-sh/platform.h | 64 +++++++++++++++++ include/asm-sh64/cayman.h | 20 ------ include/asm-sh64/hardware.h | 22 ------ include/asm-sh64/irq.h | 144 ------------------------------------- include/asm-sh64/keyboard.h | 70 ------------------ include/asm-sh64/pci.h | 102 -------------------------- include/asm-sh64/platform.h | 64 ----------------- include/asm-sh64/thread_info.h | 91 ----------------------- 10 files changed, 213 insertions(+), 513 deletions(-) create mode 100644 include/asm-sh/cpu-sh5/irq.h create mode 100644 include/asm-sh/platform.h delete mode 100644 include/asm-sh64/cayman.h delete mode 100644 include/asm-sh64/hardware.h delete mode 100644 include/asm-sh64/irq.h delete mode 100644 include/asm-sh64/keyboard.h delete mode 100644 include/asm-sh64/pci.h delete mode 100644 include/asm-sh64/platform.h delete mode 100644 include/asm-sh64/thread_info.h (limited to 'include') diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/include/asm-sh/cpu-sh5/addrspace.h index 844c5210e8e..dc36b9a03af 100644 --- a/include/asm-sh/cpu-sh5/addrspace.h +++ b/include/asm-sh/cpu-sh5/addrspace.h @@ -1,6 +1,11 @@ #ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H #define __ASM_SH_CPU_SH5_ADDRSPACE_H +#define PHYS_PERIPHERAL_BLOCK 0x09000000 +#define PHYS_DMAC_BLOCK 0x0e000000 +#define PHYS_PCI_BLOCK 0x60000000 +#define PHYS_EMI_BLOCK 0xff000000 + /* No segmentation.. */ #endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh5/irq.h b/include/asm-sh/cpu-sh5/irq.h new file mode 100644 index 00000000000..5c9e6a873ae --- /dev/null +++ b/include/asm-sh/cpu-sh5/irq.h @@ -0,0 +1,144 @@ +#ifndef __ASM_SH64_IRQ_H +#define __ASM_SH64_IRQ_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/irq.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + */ + + +/* + * Encoded IRQs are not considered worth to be supported. + * Main reason is that there's no per-encoded-interrupt + * enable/disable mechanism (as there was in SH3/4). + * An all enabled/all disabled is worth only if there's + * a cascaded IC to disable/enable/ack on. Until such + * IC is available there's no such support. + * + * Presumably Encoded IRQs may use extra IRQs beyond 64, + * below. Some logic must be added to cope with IRQ_IRL? + * in an exclusive way. + * + * Priorities are set at Platform level, when IRQ_IRL0-3 + * are set to 0 Encoding is allowed. Otherwise it's not + * allowed. + */ + +/* Independent IRQs */ +#define IRQ_IRL0 0 +#define IRQ_IRL1 1 +#define IRQ_IRL2 2 +#define IRQ_IRL3 3 + +#define IRQ_INTA 4 +#define IRQ_INTB 5 +#define IRQ_INTC 6 +#define IRQ_INTD 7 + +#define IRQ_SERR 12 +#define IRQ_ERR 13 +#define IRQ_PWR3 14 +#define IRQ_PWR2 15 +#define IRQ_PWR1 16 +#define IRQ_PWR0 17 + +#define IRQ_DMTE0 18 +#define IRQ_DMTE1 19 +#define IRQ_DMTE2 20 +#define IRQ_DMTE3 21 +#define IRQ_DAERR 22 + +#define IRQ_TUNI0 32 +#define IRQ_TUNI1 33 +#define IRQ_TUNI2 34 +#define IRQ_TICPI2 35 + +#define IRQ_ATI 36 +#define IRQ_PRI 37 +#define IRQ_CUI 38 + +#define IRQ_ERI 39 +#define IRQ_RXI 40 +#define IRQ_BRI 41 +#define IRQ_TXI 42 + +#define IRQ_ITI 63 + +#define NR_INTC_IRQS 64 + +#ifdef CONFIG_SH_CAYMAN +#define NR_EXT_IRQS 32 +#define START_EXT_IRQS 64 + +/* PCI bus 2 uses encoded external interrupts on the Cayman board */ +#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0) +#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1) +#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2) +#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3) + +#define I8042_KBD_IRQ (START_EXT_IRQS + 2) +#define I8042_AUX_IRQ (START_EXT_IRQS + 6) + +#define IRQ_CFCARD (START_EXT_IRQS + 7) +#define IRQ_PCMCIA (0) + +#else +#define NR_EXT_IRQS 0 +#endif + +#define NR_IRQS (NR_INTC_IRQS+NR_EXT_IRQS) + + +/* Default IRQs, fixed */ +#define TIMER_IRQ IRQ_TUNI0 +#define RTC_IRQ IRQ_CUI + +/* Default Priorities, Platform may choose differently */ +#define NO_PRIORITY 0 /* Disabled */ +#define TIMER_PRIORITY 2 +#define RTC_PRIORITY TIMER_PRIORITY +#define SCIF_PRIORITY 3 +#define INTD_PRIORITY 3 +#define IRL3_PRIORITY 4 +#define INTC_PRIORITY 6 +#define IRL2_PRIORITY 7 +#define INTB_PRIORITY 9 +#define IRL1_PRIORITY 10 +#define INTA_PRIORITY 12 +#define IRL0_PRIORITY 13 +#define TOP_PRIORITY 15 + +extern int intc_evt_to_irq[(0xE20/0x20)+1]; +int intc_irq_describe(char* p, int irq); + +#define irq_canonicalize(irq) (irq) + +#ifdef CONFIG_SH_CAYMAN +int cayman_irq_demux(int evt); +int cayman_irq_describe(char* p, int irq); +#define irq_demux(x) cayman_irq_demux(x) +#define irq_describe(p, x) cayman_irq_describe(p, x) +#else +#define irq_demux(x) (intc_evt_to_irq[x]) +#define irq_describe(p, x) intc_irq_describe(p, x) +#endif + +/* + * Function for "on chip support modules". + */ + +/* + * SH-5 supports Priority based interrupts only. + * Interrupt priorities are defined at platform level. + */ +#define set_ipr_data(a, b, c, d) +#define make_ipr_irq(a) +#define make_imask_irq(a) + +#endif /* __ASM_SH64_IRQ_H */ diff --git a/include/asm-sh/platform.h b/include/asm-sh/platform.h new file mode 100644 index 00000000000..bd0d9c405a8 --- /dev/null +++ b/include/asm-sh/platform.h @@ -0,0 +1,64 @@ +#ifndef __ASM_SH64_PLATFORM_H +#define __ASM_SH64_PLATFORM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/platform.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * benedict.gaster@superh.com: 3rd May 2002 + * Added support for ramdisk, removing statically linked romfs at the same time. + */ + +#include +#include + + +/* + * Platform definition structure. + */ +struct sh64_platform { + unsigned int readonly_rootfs; + unsigned int ramdisk_flags; + unsigned int initial_root_dev; + unsigned int loader_type; + unsigned int initrd_start; + unsigned int initrd_size; + unsigned int fpu_flags; + unsigned int io_res_count; + unsigned int kram_res_count; + unsigned int xram_res_count; + unsigned int rom_res_count; + struct resource *io_res_p; + struct resource *kram_res_p; + struct resource *xram_res_p; + struct resource *rom_res_p; +}; + +extern struct sh64_platform platform_parms; + +extern unsigned long long memory_start, memory_end; + +extern unsigned long long fpu_in_use; + +extern int platform_int_priority[NR_INTC_IRQS]; + +#define FPU_FLAGS (platform_parms.fpu_flags) +#define STANDARD_IO_RESOURCES (platform_parms.io_res_count) +#define STANDARD_KRAM_RESOURCES (platform_parms.kram_res_count) +#define STANDARD_XRAM_RESOURCES (platform_parms.xram_res_count) +#define STANDARD_ROM_RESOURCES (platform_parms.rom_res_count) + +/* + * Kernel Memory description, Respectively: + * code = last but one memory descriptor + * data = last memory descriptor + */ +#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2]) +#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1]) + +#endif /* __ASM_SH64_PLATFORM_H */ diff --git a/include/asm-sh64/cayman.h b/include/asm-sh64/cayman.h deleted file mode 100644 index 7b6b9684484..00000000000 --- a/include/asm-sh64/cayman.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/cayman.h - * - * Cayman definitions - * - * Global defintions for the SH5 Cayman board - * - * Copyright (C) 2002 Stuart Menefy - */ - - -/* Setup for the SMSC FDC37C935 / LAN91C100FD */ -#define SMSC_IRQ IRQ_IRL1 - -/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ -#define PCI2_IRQ IRQ_IRL3 diff --git a/include/asm-sh64/hardware.h b/include/asm-sh64/hardware.h deleted file mode 100644 index 931c1ad8084..00000000000 --- a/include/asm-sh64/hardware.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __ASM_SH64_HARDWARE_H -#define __ASM_SH64_HARDWARE_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/hardware.h - * - * Copyright (C) 2002 Stuart Menefy - * Copyright (C) 2003 Paul Mundt - * - * Defitions of the locations of registers in the physical address space. - */ - -#define PHYS_PERIPHERAL_BLOCK 0x09000000 -#define PHYS_DMAC_BLOCK 0x0e000000 -#define PHYS_PCI_BLOCK 0x60000000 -#define PHYS_EMI_BLOCK 0xff000000 - -#endif /* __ASM_SH64_HARDWARE_H */ diff --git a/include/asm-sh64/irq.h b/include/asm-sh64/irq.h deleted file mode 100644 index 5c9e6a873ae..00000000000 --- a/include/asm-sh64/irq.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef __ASM_SH64_IRQ_H -#define __ASM_SH64_IRQ_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/irq.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - */ - - -/* - * Encoded IRQs are not considered worth to be supported. - * Main reason is that there's no per-encoded-interrupt - * enable/disable mechanism (as there was in SH3/4). - * An all enabled/all disabled is worth only if there's - * a cascaded IC to disable/enable/ack on. Until such - * IC is available there's no such support. - * - * Presumably Encoded IRQs may use extra IRQs beyond 64, - * below. Some logic must be added to cope with IRQ_IRL? - * in an exclusive way. - * - * Priorities are set at Platform level, when IRQ_IRL0-3 - * are set to 0 Encoding is allowed. Otherwise it's not - * allowed. - */ - -/* Independent IRQs */ -#define IRQ_IRL0 0 -#define IRQ_IRL1 1 -#define IRQ_IRL2 2 -#define IRQ_IRL3 3 - -#define IRQ_INTA 4 -#define IRQ_INTB 5 -#define IRQ_INTC 6 -#define IRQ_INTD 7 - -#define IRQ_SERR 12 -#define IRQ_ERR 13 -#define IRQ_PWR3 14 -#define IRQ_PWR2 15 -#define IRQ_PWR1 16 -#define IRQ_PWR0 17 - -#define IRQ_DMTE0 18 -#define IRQ_DMTE1 19 -#define IRQ_DMTE2 20 -#define IRQ_DMTE3 21 -#define IRQ_DAERR 22 - -#define IRQ_TUNI0 32 -#define IRQ_TUNI1 33 -#define IRQ_TUNI2 34 -#define IRQ_TICPI2 35 - -#define IRQ_ATI 36 -#define IRQ_PRI 37 -#define IRQ_CUI 38 - -#define IRQ_ERI 39 -#define IRQ_RXI 40 -#define IRQ_BRI 41 -#define IRQ_TXI 42 - -#define IRQ_ITI 63 - -#define NR_INTC_IRQS 64 - -#ifdef CONFIG_SH_CAYMAN -#define NR_EXT_IRQS 32 -#define START_EXT_IRQS 64 - -/* PCI bus 2 uses encoded external interrupts on the Cayman board */ -#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0) -#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1) -#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2) -#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3) - -#define I8042_KBD_IRQ (START_EXT_IRQS + 2) -#define I8042_AUX_IRQ (START_EXT_IRQS + 6) - -#define IRQ_CFCARD (START_EXT_IRQS + 7) -#define IRQ_PCMCIA (0) - -#else -#define NR_EXT_IRQS 0 -#endif - -#define NR_IRQS (NR_INTC_IRQS+NR_EXT_IRQS) - - -/* Default IRQs, fixed */ -#define TIMER_IRQ IRQ_TUNI0 -#define RTC_IRQ IRQ_CUI - -/* Default Priorities, Platform may choose differently */ -#define NO_PRIORITY 0 /* Disabled */ -#define TIMER_PRIORITY 2 -#define RTC_PRIORITY TIMER_PRIORITY -#define SCIF_PRIORITY 3 -#define INTD_PRIORITY 3 -#define IRL3_PRIORITY 4 -#define INTC_PRIORITY 6 -#define IRL2_PRIORITY 7 -#define INTB_PRIORITY 9 -#define IRL1_PRIORITY 10 -#define INTA_PRIORITY 12 -#define IRL0_PRIORITY 13 -#define TOP_PRIORITY 15 - -extern int intc_evt_to_irq[(0xE20/0x20)+1]; -int intc_irq_describe(char* p, int irq); - -#define irq_canonicalize(irq) (irq) - -#ifdef CONFIG_SH_CAYMAN -int cayman_irq_demux(int evt); -int cayman_irq_describe(char* p, int irq); -#define irq_demux(x) cayman_irq_demux(x) -#define irq_describe(p, x) cayman_irq_describe(p, x) -#else -#define irq_demux(x) (intc_evt_to_irq[x]) -#define irq_describe(p, x) intc_irq_describe(p, x) -#endif - -/* - * Function for "on chip support modules". - */ - -/* - * SH-5 supports Priority based interrupts only. - * Interrupt priorities are defined at platform level. - */ -#define set_ipr_data(a, b, c, d) -#define make_ipr_irq(a) -#define make_imask_irq(a) - -#endif /* __ASM_SH64_IRQ_H */ diff --git a/include/asm-sh64/keyboard.h b/include/asm-sh64/keyboard.h deleted file mode 100644 index 0b01c3beb2f..00000000000 --- a/include/asm-sh64/keyboard.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * linux/include/asm-shmedia/keyboard.h - * - * Copied from i386 version: - * Created 3 Nov 1996 by Geert Uytterhoeven - */ - -/* - * This file contains the i386 architecture specific keyboard definitions - */ - -#ifndef __ASM_SH64_KEYBOARD_H -#define __ASM_SH64_KEYBOARD_H - -#ifdef __KERNEL__ - -#include -#include -#include - -#ifdef CONFIG_SH_CAYMAN -#define KEYBOARD_IRQ (START_EXT_IRQS + 2) /* SMSC SuperIO IRQ 1 */ -#endif -#define DISABLE_KBD_DURING_INTERRUPTS 0 - -extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int pckbd_getkeycode(unsigned int scancode); -extern int pckbd_translate(unsigned char scancode, unsigned char *keycode, - char raw_mode); -extern char pckbd_unexpected_up(unsigned char keycode); -extern void pckbd_leds(unsigned char leds); -extern void pckbd_init_hw(void); - -#define kbd_setkeycode pckbd_setkeycode -#define kbd_getkeycode pckbd_getkeycode -#define kbd_translate pckbd_translate -#define kbd_unexpected_up pckbd_unexpected_up -#define kbd_leds pckbd_leds -#define kbd_init_hw pckbd_init_hw - -/* resource allocation */ -#define kbd_request_region() -#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \ - "keyboard", NULL) - -/* How to access the keyboard macros on this platform. */ -#define kbd_read_input() inb(KBD_DATA_REG) -#define kbd_read_status() inb(KBD_STATUS_REG) -#define kbd_write_output(val) outb(val, KBD_DATA_REG) -#define kbd_write_command(val) outb(val, KBD_CNTL_REG) - -/* Some stoneage hardware needs delays after some operations. */ -#define kbd_pause() do { } while(0) - -/* - * Machine specific bits for the PS/2 driver - */ - -#ifdef CONFIG_SH_CAYMAN -#define AUX_IRQ (START_EXT_IRQS + 6) /* SMSC SuperIO IRQ12 */ -#endif - -#define aux_request_irq(hand, dev_id) \ - request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id) - -#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH64_KEYBOARD_H */ - diff --git a/include/asm-sh64/pci.h b/include/asm-sh64/pci.h deleted file mode 100644 index 18055dbbb4b..00000000000 --- a/include/asm-sh64/pci.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef __ASM_SH64_PCI_H -#define __ASM_SH64_PCI_H - -#ifdef __KERNEL__ - -#include - -/* Can be used to override the logic in pci_scan_bus for skipping - already-configured bus numbers - to be used for buggy BIOSes - or architectures with incomplete PCI setup by the loader */ - -#define pcibios_assign_all_busses() 1 - -/* - * These are currently the correct values for the STM overdrive board - * We need some way of setting this on a board specific way, it will - * not be the same on other boards I think - */ -#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -#define PCIBIOS_MIN_IO 0x2000 -#define PCIBIOS_MIN_MEM 0x40000000 -#endif - -extern void pcibios_set_master(struct pci_dev *dev); - -/* - * Set penalize isa irq function - */ -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* Dynamic DMA mapping stuff. - * SuperH has everything mapped statically like x86. - */ - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#include -#include -#include -#include -#include - -/* pci_unmap_{single,page} being a nop depends upon the - * configuration. - */ -#ifdef CONFIG_SH_PCIDMA_NONCOHERENT -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) -#else -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) -#endif - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -/* Board-specific fixup routines. */ -extern void pcibios_fixup(void); -extern void pcibios_fixup_irqs(void); - -#ifdef CONFIG_PCI_AUTO -extern int pciauto_assign_resources(int busno, struct pci_channel *hose); -#endif - -#endif /* __KERNEL__ */ - -/* generic pci stuff */ -#include - -/* generic DMA-mapping stuff */ -#include - -#endif /* __ASM_SH64_PCI_H */ - diff --git a/include/asm-sh64/platform.h b/include/asm-sh64/platform.h deleted file mode 100644 index bd0d9c405a8..00000000000 --- a/include/asm-sh64/platform.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __ASM_SH64_PLATFORM_H -#define __ASM_SH64_PLATFORM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/platform.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * benedict.gaster@superh.com: 3rd May 2002 - * Added support for ramdisk, removing statically linked romfs at the same time. - */ - -#include -#include - - -/* - * Platform definition structure. - */ -struct sh64_platform { - unsigned int readonly_rootfs; - unsigned int ramdisk_flags; - unsigned int initial_root_dev; - unsigned int loader_type; - unsigned int initrd_start; - unsigned int initrd_size; - unsigned int fpu_flags; - unsigned int io_res_count; - unsigned int kram_res_count; - unsigned int xram_res_count; - unsigned int rom_res_count; - struct resource *io_res_p; - struct resource *kram_res_p; - struct resource *xram_res_p; - struct resource *rom_res_p; -}; - -extern struct sh64_platform platform_parms; - -extern unsigned long long memory_start, memory_end; - -extern unsigned long long fpu_in_use; - -extern int platform_int_priority[NR_INTC_IRQS]; - -#define FPU_FLAGS (platform_parms.fpu_flags) -#define STANDARD_IO_RESOURCES (platform_parms.io_res_count) -#define STANDARD_KRAM_RESOURCES (platform_parms.kram_res_count) -#define STANDARD_XRAM_RESOURCES (platform_parms.xram_res_count) -#define STANDARD_ROM_RESOURCES (platform_parms.rom_res_count) - -/* - * Kernel Memory description, Respectively: - * code = last but one memory descriptor - * data = last memory descriptor - */ -#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2]) -#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1]) - -#endif /* __ASM_SH64_PLATFORM_H */ diff --git a/include/asm-sh64/thread_info.h b/include/asm-sh64/thread_info.h deleted file mode 100644 index f6d5117c53a..00000000000 --- a/include/asm-sh64/thread_info.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __ASM_SH64_THREAD_INFO_H -#define __ASM_SH64_THREAD_INFO_H - -/* - * SuperH 5 version - * Copyright (C) 2003 Paul Mundt - */ - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants must also be changed - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - /* Put the 4 32-bit fields together to make asm offsetting easier. */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - __u16 cpu; - - mm_segment_t addr_limit; - struct restart_block restart_block; - - __u8 supervisor_stack[0]; -}; - -/* - * macros/functions for gaining access to the thread information structure - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - - __asm__ __volatile__ ("getcon " __KCR0 ", %0\n\t" : "=r" (ti)); - - return ti; -} - -/* thread information allocation */ - - - -#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1)) -#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) - -#endif /* __ASSEMBLY__ */ - -#define THREAD_SIZE 8192 - -#define PREEMPT_ACTIVE 0x10000000 - -/* thread information flags */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_MEMDIE 4 -#define TIF_RESTORE_SIGMASK 5 /* Restore signal mask in do_signal */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_MEMDIE (1 << TIF_MEMDIE) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH64_THREAD_INFO_H */ -- cgit v1.2.3-70-g09d2 From 18bc81319b438ae3266e1b2653ce874912dae891 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 21 Nov 2007 23:16:33 +0900 Subject: sh: Get the mach-cayman IRQ support building. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/irq/Makefile | 1 + arch/sh/kernel/cpu/irq/intc-sh5.c | 257 +++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh5/Makefile | 4 - arch/sh/kernel/cpu/sh5/setup-sh5-101.c | 15 -- arch/sh/mach-cayman/Makefile | 8 +- arch/sh/mach-cayman/iomap.c | 22 --- arch/sh/mach-cayman/irq.c | 26 ++-- arch/sh/mach-cayman/setup.c | 94 +++--------- arch/sh64/kernel/irq_intc.c | 272 --------------------------------- include/asm-sh/cpu-sh5/irq.h | 28 +--- include/asm-sh/platform.h | 64 -------- 11 files changed, 295 insertions(+), 496 deletions(-) create mode 100644 arch/sh/kernel/cpu/irq/intc-sh5.c delete mode 100644 arch/sh/kernel/cpu/sh5/setup-sh5-101.c delete mode 100644 arch/sh/mach-cayman/iomap.c delete mode 100644 arch/sh64/kernel/irq_intc.c delete mode 100644 include/asm-sh/platform.h (limited to 'include') diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 81d37e948b8..cc1836e47a5 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -4,5 +4,6 @@ obj-y += intc.o obj-$(CONFIG_SUPERH32) += imask.o +obj-$(CONFIG_CPU_SH5) += intc-sh5.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c new file mode 100644 index 00000000000..49b845a31ff --- /dev/null +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -0,0 +1,257 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * arch/sh64/kernel/irq_intc.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * + * Interrupt Controller support for SH5 INTC. + * Per-interrupt selective. IRLM=0 (Fixed priority) is not + * supported being useless without a cascaded interrupt + * controller. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Maybe the generic Peripheral block could move to a more + * generic include file. INTC Block will be defined here + * and only here to make INTC self-contained in a single + * file. + */ +#define INTC_BLOCK_OFFSET 0x01000000 + +/* Base */ +#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \ + INTC_BLOCK_OFFSET + +/* Address */ +#define INTC_ICR_SET (intc_virt + 0x0) +#define INTC_ICR_CLEAR (intc_virt + 0x8) +#define INTC_INTPRI_0 (intc_virt + 0x10) +#define INTC_INTSRC_0 (intc_virt + 0x50) +#define INTC_INTSRC_1 (intc_virt + 0x58) +#define INTC_INTREQ_0 (intc_virt + 0x60) +#define INTC_INTREQ_1 (intc_virt + 0x68) +#define INTC_INTENB_0 (intc_virt + 0x70) +#define INTC_INTENB_1 (intc_virt + 0x78) +#define INTC_INTDSB_0 (intc_virt + 0x80) +#define INTC_INTDSB_1 (intc_virt + 0x88) + +#define INTC_ICR_IRLM 0x1 +#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */ +#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */ + + +/* + * Mapper between the vector ordinal and the IRQ number + * passed to kernel/device drivers. + */ +int intc_evt_to_irq[(0xE20/0x20)+1] = { + -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */ + 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */ + 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */ + 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */ + -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */ + -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */ + 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */ + 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */ + 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */ + -1, -1 /* 0xE00 - 0xE20 */ +}; + +/* + * Opposite mapper. + */ +static int IRQ_to_vectorN[NR_INTC_IRQS] = { + 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */ + -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */ + 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */ + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */ + 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */ + -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */ + +}; + +static unsigned long intc_virt; + +static unsigned int startup_intc_irq(unsigned int irq); +static void shutdown_intc_irq(unsigned int irq); +static void enable_intc_irq(unsigned int irq); +static void disable_intc_irq(unsigned int irq); +static void mask_and_ack_intc(unsigned int); +static void end_intc_irq(unsigned int irq); + +static struct hw_interrupt_type intc_irq_type = { + .typename = "INTC", + .startup = startup_intc_irq, + .shutdown = shutdown_intc_irq, + .enable = enable_intc_irq, + .disable = disable_intc_irq, + .ack = mask_and_ack_intc, + .end = end_intc_irq +}; + +static int irlm; /* IRL mode */ + +static unsigned int startup_intc_irq(unsigned int irq) +{ + enable_intc_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_intc_irq(unsigned int irq) +{ + disable_intc_irq(irq); +} + +static void enable_intc_irq(unsigned int irq) +{ + unsigned long reg; + unsigned long bitmask; + + if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY)) + printk("Trying to use straight IRL0-3 with an encoding platform.\n"); + + if (irq < 32) { + reg = INTC_INTENB_0; + bitmask = 1 << irq; + } else { + reg = INTC_INTENB_1; + bitmask = 1 << (irq - 32); + } + + ctrl_outl(bitmask, reg); +} + +static void disable_intc_irq(unsigned int irq) +{ + unsigned long reg; + unsigned long bitmask; + + if (irq < 32) { + reg = INTC_INTDSB_0; + bitmask = 1 << irq; + } else { + reg = INTC_INTDSB_1; + bitmask = 1 << (irq - 32); + } + + ctrl_outl(bitmask, reg); +} + +static void mask_and_ack_intc(unsigned int irq) +{ + disable_intc_irq(irq); +} + +static void end_intc_irq(unsigned int irq) +{ + enable_intc_irq(irq); +} + +/* For future use, if we ever support IRLM=0) */ +void make_intc_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].chip = &intc_irq_type; + disable_intc_irq(irq); +} + +#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) +int intc_irq_describe(char* p, int irq) +{ + if (irq < NR_INTC_IRQS) + return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20); + else + return 0; +} +#endif + +void __init plat_irq_setup(void) +{ + unsigned long long __dummy0, __dummy1=~0x00000000100000f0; + unsigned long reg; + unsigned long data; + int i; + + intc_virt = onchip_remap(INTC_BASE, 1024, "INTC"); + if (!intc_virt) { + panic("Unable to remap INTC\n"); + } + + + /* Set default: per-line enable/disable, priority driven ack/eoi */ + for (i = 0; i < NR_INTC_IRQS; i++) { + if (platform_int_priority[i] != NO_PRIORITY) { + irq_desc[i].chip = &intc_irq_type; + } + } + + + /* Disable all interrupts and set all priorities to 0 to avoid trouble */ + ctrl_outl(-1, INTC_INTDSB_0); + ctrl_outl(-1, INTC_INTDSB_1); + + for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8) + ctrl_outl( NO_PRIORITY, reg); + + + /* Set IRLM */ + /* If all the priorities are set to 'no priority', then + * assume we are using encoded mode. + */ + irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \ + platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3]; + + if (irlm == NO_PRIORITY) { + /* IRLM = 0 */ + reg = INTC_ICR_CLEAR; + i = IRQ_INTA; + printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); + } else { + /* IRLM = 1 */ + reg = INTC_ICR_SET; + i = IRQ_IRL0; + } + ctrl_outl(INTC_ICR_IRLM, reg); + + /* Set interrupt priorities according to platform description */ + for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { + data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4); + if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { + /* Upon the 7th, set Priority Register */ + ctrl_outl(data, reg); + data = 0; + reg += 8; + } + } + + /* + * And now let interrupts come in. + * sti() is not enough, we need to + * lower priority, too. + */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile index 0ef257b72e5..8646363e9de 100644 --- a/arch/sh/kernel/cpu/sh5/Makefile +++ b/arch/sh/kernel/cpu/sh5/Makefile @@ -5,7 +5,3 @@ obj-y := entry.o probe.o switchto.o obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_KALLSYMS) += unwind.o - -# CPU subtype setup -obj-$(CONFIG_CPU_SUBTYPE_SH5_101) += setup-sh5-101.o -obj-$(CONFIG_CPU_SUBTYPE_SH5_103) += setup-sh5-101.o diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5-101.c b/arch/sh/kernel/cpu/sh5/setup-sh5-101.c deleted file mode 100644 index 3680012d710..00000000000 --- a/arch/sh/kernel/cpu/sh5/setup-sh5-101.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * SH5-101 Setup - * - * Copyright (C) 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include - -void __init plat_irq_setup(void) -{ - /* do nothing - all IRL interrupts are handled by the board code */ -} diff --git a/arch/sh/mach-cayman/Makefile b/arch/sh/mach-cayman/Makefile index 67a2258bf8c..489a8f86736 100644 --- a/arch/sh/mach-cayman/Makefile +++ b/arch/sh/mach-cayman/Makefile @@ -1,11 +1,5 @@ # # Makefile for the Hitachi Cayman specific parts of the kernel # -# Note! Dependencies are done automagically by 'make dep', which also -# removes any old dependencies. DON'T put your own dependencies here -# unless it's something special (ie not a .c file). -# - -obj-y := setup.o irq.o iomap.o +obj-y := setup.o irq.o obj-$(CONFIG_HEARTBEAT) += led.o - diff --git a/arch/sh/mach-cayman/iomap.c b/arch/sh/mach-cayman/iomap.c deleted file mode 100644 index a5c645f02d5..00000000000 --- a/arch/sh/mach-cayman/iomap.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/sh64/mach-cayman/iomap.c - * - * Cayman iomap interface - * - * Copyright (C) 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include - -void __iomem *ioport_map(unsigned long port, unsigned int len) -{ - if (port < 0x400) - return (void __iomem *)((port << 2) | smsc_superio_virt); - - return (void __iomem *)port; -} - diff --git a/arch/sh/mach-cayman/irq.c b/arch/sh/mach-cayman/irq.c index aaad36d37d1..30ec7bebfaf 100644 --- a/arch/sh/mach-cayman/irq.c +++ b/arch/sh/mach-cayman/irq.c @@ -1,24 +1,26 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/irq_cayman.c - * - * SH-5 Cayman Interrupt Support + * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support * * This file handles the board specific parts of the Cayman interrupt system * * Copyright (C) 2002 Stuart Menefy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - -#include -#include -#include +#include #include #include #include -#include +#include +#include + +/* Setup for the SMSC FDC37C935 / LAN91C100FD */ +#define SMSC_IRQ IRQ_IRL1 + +/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ +#define PCI2_IRQ IRQ_IRL3 unsigned long epld_virt; diff --git a/arch/sh/mach-cayman/setup.c b/arch/sh/mach-cayman/setup.c index 726c520d7eb..8c9fa472d8f 100644 --- a/arch/sh/mach-cayman/setup.c +++ b/arch/sh/mach-cayman/setup.c @@ -1,28 +1,19 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/mach-cayman/setup.c + * arch/sh/mach-cayman/setup.c * * SH5 Cayman support * - * This file handles the architecture-dependent parts of initialization + * Copyright (C) 2002 David J. Mckay & Benedict Gaster + * Copyright (C) 2003 - 2007 Paul Mundt * - * Copyright David J. Mckay. - * Needs major work! - * - * benedict.gaster@superh.com: 3rd May 2002 - * Added support for ramdisk, removing statically linked romfs at the same time. - * - * lethal@linux-sh.org: 15th May 2003 - * Use the generic procfs cpuinfo interface, just return a valid board name. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include +#include #include -#include -#include -#include +#include /* * Platform Dependent Interrupt Priorities. @@ -96,42 +87,6 @@ unsigned long smsc_superio_virt; -/* - * Platform dependent structures: maps and parms block. - */ -struct resource io_resources[] = { - /* To be updated with external devices */ -}; - -struct resource kram_resources[] = { - /* These must be last in the array */ - { .name = "Kernel code", .start = 0, .end = 0 }, - /* These must be last in the array */ - { .name = "Kernel data", .start = 0, .end = 0 } -}; - -struct resource xram_resources[] = { - /* To be updated with external devices */ -}; - -struct resource rom_resources[] = { - /* To be updated with external devices */ -}; - -struct sh64_platform platform_parms = { - .readonly_rootfs = 1, - .initial_root_dev = 0x0100, - .loader_type = 1, - .io_res_p = io_resources, - .io_res_count = ARRAY_SIZE(io_resources), - .kram_res_p = kram_resources, - .kram_res_count = ARRAY_SIZE(kram_resources), - .xram_res_p = xram_resources, - .xram_res_count = ARRAY_SIZE(xram_resources), - .rom_res_p = rom_resources, - .rom_res_count = ARRAY_SIZE(rom_resources), -}; - int platform_int_priority[NR_INTC_IRQS] = { IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ @@ -210,30 +165,23 @@ static int __init smsc_superio_setup(void) return 0; } - -/* This is grotty, but, because kernel is always referenced on the link line - * before any devices, this is safe. - */ __initcall(smsc_superio_setup); -void __init platform_setup(void) -{ - /* Cayman platform leaves the decision to head.S, for now */ - platform_parms.fpu_flags = fpu_in_use; -} - -void __init platform_monitor(void) +static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) { - /* Nothing yet .. */ -} + if (port < 0x400) { + extern unsigned long smsc_superio_virt; + return (void __iomem *)((port << 2) | smsc_superio_virt); + } -void __init platform_reserve(void) -{ - /* Nothing yet .. */ + return (void __iomem *)port; } -const char *get_system_type(void) -{ - return "Hitachi Cayman"; -} +extern void init_cayman_irq(void); +static struct sh_machine_vector mv_cayman __initmv = { + .mv_name = "Hitachi Cayman", + .mv_nr_irqs = 64, + .mv_ioport_map = cayman_ioport_map, + .mv_init_irq = init_cayman_irq, +}; diff --git a/arch/sh64/kernel/irq_intc.c b/arch/sh64/kernel/irq_intc.c deleted file mode 100644 index 3b63a93198f..00000000000 --- a/arch/sh64/kernel/irq_intc.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/irq_intc.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * Interrupt Controller support for SH5 INTC. - * Per-interrupt selective. IRLM=0 (Fixed priority) is not - * supported being useless without a cascaded interrupt - * controller. - * - */ - -#include -#include -#include -#include -#include -#include /* this includes also -#include -#include -#include -#include - -/* - * Maybe the generic Peripheral block could move to a more - * generic include file. INTC Block will be defined here - * and only here to make INTC self-contained in a single - * file. - */ -#define INTC_BLOCK_OFFSET 0x01000000 - -/* Base */ -#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \ - INTC_BLOCK_OFFSET - -/* Address */ -#define INTC_ICR_SET (intc_virt + 0x0) -#define INTC_ICR_CLEAR (intc_virt + 0x8) -#define INTC_INTPRI_0 (intc_virt + 0x10) -#define INTC_INTSRC_0 (intc_virt + 0x50) -#define INTC_INTSRC_1 (intc_virt + 0x58) -#define INTC_INTREQ_0 (intc_virt + 0x60) -#define INTC_INTREQ_1 (intc_virt + 0x68) -#define INTC_INTENB_0 (intc_virt + 0x70) -#define INTC_INTENB_1 (intc_virt + 0x78) -#define INTC_INTDSB_0 (intc_virt + 0x80) -#define INTC_INTDSB_1 (intc_virt + 0x88) - -#define INTC_ICR_IRLM 0x1 -#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */ -#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */ - - -/* - * Mapper between the vector ordinal and the IRQ number - * passed to kernel/device drivers. - */ -int intc_evt_to_irq[(0xE20/0x20)+1] = { - -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */ - 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */ - 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */ - 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */ - -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */ - -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */ - 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */ - 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */ - 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */ - -1, -1 /* 0xE00 - 0xE20 */ -}; - -/* - * Opposite mapper. - */ -static int IRQ_to_vectorN[NR_INTC_IRQS] = { - 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */ - -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */ - 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */ - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */ - 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */ - -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */ - -}; - -static unsigned long intc_virt; - -static unsigned int startup_intc_irq(unsigned int irq); -static void shutdown_intc_irq(unsigned int irq); -static void enable_intc_irq(unsigned int irq); -static void disable_intc_irq(unsigned int irq); -static void mask_and_ack_intc(unsigned int); -static void end_intc_irq(unsigned int irq); - -static struct hw_interrupt_type intc_irq_type = { - .typename = "INTC", - .startup = startup_intc_irq, - .shutdown = shutdown_intc_irq, - .enable = enable_intc_irq, - .disable = disable_intc_irq, - .ack = mask_and_ack_intc, - .end = end_intc_irq -}; - -static int irlm; /* IRL mode */ - -static unsigned int startup_intc_irq(unsigned int irq) -{ - enable_intc_irq(irq); - return 0; /* never anything pending */ -} - -static void shutdown_intc_irq(unsigned int irq) -{ - disable_intc_irq(irq); -} - -static void enable_intc_irq(unsigned int irq) -{ - unsigned long reg; - unsigned long bitmask; - - if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY)) - printk("Trying to use straight IRL0-3 with an encoding platform.\n"); - - if (irq < 32) { - reg = INTC_INTENB_0; - bitmask = 1 << irq; - } else { - reg = INTC_INTENB_1; - bitmask = 1 << (irq - 32); - } - - ctrl_outl(bitmask, reg); -} - -static void disable_intc_irq(unsigned int irq) -{ - unsigned long reg; - unsigned long bitmask; - - if (irq < 32) { - reg = INTC_INTDSB_0; - bitmask = 1 << irq; - } else { - reg = INTC_INTDSB_1; - bitmask = 1 << (irq - 32); - } - - ctrl_outl(bitmask, reg); -} - -static void mask_and_ack_intc(unsigned int irq) -{ - disable_intc_irq(irq); -} - -static void end_intc_irq(unsigned int irq) -{ - enable_intc_irq(irq); -} - -/* For future use, if we ever support IRLM=0) */ -void make_intc_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intc_irq_type; - disable_intc_irq(irq); -} - -#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) -int intc_irq_describe(char* p, int irq) -{ - if (irq < NR_INTC_IRQS) - return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20); - else - return 0; -} -#endif - -void __init init_IRQ(void) -{ - unsigned long long __dummy0, __dummy1=~0x00000000100000f0; - unsigned long reg; - unsigned long data; - int i; - - intc_virt = onchip_remap(INTC_BASE, 1024, "INTC"); - if (!intc_virt) { - panic("Unable to remap INTC\n"); - } - - - /* Set default: per-line enable/disable, priority driven ack/eoi */ - for (i = 0; i < NR_INTC_IRQS; i++) { - if (platform_int_priority[i] != NO_PRIORITY) { - irq_desc[i].chip = &intc_irq_type; - } - } - - - /* Disable all interrupts and set all priorities to 0 to avoid trouble */ - ctrl_outl(-1, INTC_INTDSB_0); - ctrl_outl(-1, INTC_INTDSB_1); - - for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8) - ctrl_outl( NO_PRIORITY, reg); - - - /* Set IRLM */ - /* If all the priorities are set to 'no priority', then - * assume we are using encoded mode. - */ - irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \ - platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3]; - - if (irlm == NO_PRIORITY) { - /* IRLM = 0 */ - reg = INTC_ICR_CLEAR; - i = IRQ_INTA; - printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); - } else { - /* IRLM = 1 */ - reg = INTC_ICR_SET; - i = IRQ_IRL0; - } - ctrl_outl(INTC_ICR_IRLM, reg); - - /* Set interrupt priorities according to platform description */ - for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { - data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4); - if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { - /* Upon the 7th, set Priority Register */ - ctrl_outl(data, reg); - data = 0; - reg += 8; - } - } - -#ifdef CONFIG_SH_CAYMAN - { - extern void init_cayman_irq(void); - - init_cayman_irq(); - } -#endif - - /* - * And now let interrupts come in. - * sti() is not enough, we need to - * lower priority, too. - */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} diff --git a/include/asm-sh/cpu-sh5/irq.h b/include/asm-sh/cpu-sh5/irq.h index 5c9e6a873ae..f539baec852 100644 --- a/include/asm-sh/cpu-sh5/irq.h +++ b/include/asm-sh/cpu-sh5/irq.h @@ -92,9 +92,6 @@ #define NR_EXT_IRQS 0 #endif -#define NR_IRQS (NR_INTC_IRQS+NR_EXT_IRQS) - - /* Default IRQs, fixed */ #define TIMER_IRQ IRQ_TUNI0 #define RTC_IRQ IRQ_CUI @@ -116,29 +113,6 @@ extern int intc_evt_to_irq[(0xE20/0x20)+1]; int intc_irq_describe(char* p, int irq); - -#define irq_canonicalize(irq) (irq) - -#ifdef CONFIG_SH_CAYMAN -int cayman_irq_demux(int evt); -int cayman_irq_describe(char* p, int irq); -#define irq_demux(x) cayman_irq_demux(x) -#define irq_describe(p, x) cayman_irq_describe(p, x) -#else -#define irq_demux(x) (intc_evt_to_irq[x]) -#define irq_describe(p, x) intc_irq_describe(p, x) -#endif - -/* - * Function for "on chip support modules". - */ - -/* - * SH-5 supports Priority based interrupts only. - * Interrupt priorities are defined at platform level. - */ -#define set_ipr_data(a, b, c, d) -#define make_ipr_irq(a) -#define make_imask_irq(a) +extern int platform_int_priority[NR_INTC_IRQS]; #endif /* __ASM_SH64_IRQ_H */ diff --git a/include/asm-sh/platform.h b/include/asm-sh/platform.h deleted file mode 100644 index bd0d9c405a8..00000000000 --- a/include/asm-sh/platform.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __ASM_SH64_PLATFORM_H -#define __ASM_SH64_PLATFORM_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/platform.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * benedict.gaster@superh.com: 3rd May 2002 - * Added support for ramdisk, removing statically linked romfs at the same time. - */ - -#include -#include - - -/* - * Platform definition structure. - */ -struct sh64_platform { - unsigned int readonly_rootfs; - unsigned int ramdisk_flags; - unsigned int initial_root_dev; - unsigned int loader_type; - unsigned int initrd_start; - unsigned int initrd_size; - unsigned int fpu_flags; - unsigned int io_res_count; - unsigned int kram_res_count; - unsigned int xram_res_count; - unsigned int rom_res_count; - struct resource *io_res_p; - struct resource *kram_res_p; - struct resource *xram_res_p; - struct resource *rom_res_p; -}; - -extern struct sh64_platform platform_parms; - -extern unsigned long long memory_start, memory_end; - -extern unsigned long long fpu_in_use; - -extern int platform_int_priority[NR_INTC_IRQS]; - -#define FPU_FLAGS (platform_parms.fpu_flags) -#define STANDARD_IO_RESOURCES (platform_parms.io_res_count) -#define STANDARD_KRAM_RESOURCES (platform_parms.kram_res_count) -#define STANDARD_XRAM_RESOURCES (platform_parms.xram_res_count) -#define STANDARD_ROM_RESOURCES (platform_parms.rom_res_count) - -/* - * Kernel Memory description, Respectively: - * code = last but one memory descriptor - * data = last memory descriptor - */ -#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2]) -#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1]) - -#endif /* __ASM_SH64_PLATFORM_H */ -- cgit v1.2.3-70-g09d2 From 29e0d209b38479e6817318a971082421a7d630b7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 22 Nov 2007 13:11:39 +0900 Subject: sh: Add SH-5 subtypes to check_bugs() for utsname. Signed-off-by: Paul Mundt --- include/asm-sh/bugs.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index b66139ff73f..e2d79567e2a 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -48,9 +48,16 @@ static void __init check_bugs(void) *p++ = 's'; *p++ = 'p'; break; - default: - *p++ = '?'; - *p++ = '!'; + case CPU_SH5_101 ... CPU_SH5_103: + *p++ = '6'; + *p++ = '4'; + break; + case CPU_SH_NONE: + /* + * Specifically use CPU_SH_NONE rather than default:, + * so we're able to have the compiler whine about + * unhandled enumerations. + */ break; } -- cgit v1.2.3-70-g09d2 From b6d7b666097e79a8908e3c43fd55fd291a95e133 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 22 Nov 2007 16:29:10 +0900 Subject: sh: Get the SH-5 PCI support building. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + arch/sh/drivers/pci/Makefile | 2 + arch/sh/drivers/pci/ops-cayman.c | 94 ++++++++ arch/sh/drivers/pci/ops-sh5.c | 93 ++++++++ arch/sh/drivers/pci/pci-sh5.c | 452 +++++++-------------------------------- arch/sh/drivers/pci/pci-sh5.h | 10 +- arch/sh/drivers/pci/pci.c | 2 +- include/asm-sh/pci.h | 5 +- 8 files changed, 275 insertions(+), 384 deletions(-) create mode 100644 arch/sh/drivers/pci/ops-cayman.c create mode 100644 arch/sh/drivers/pci/ops-sh5.c (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c0797b4aadb..1ad3ce54002 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -512,6 +512,7 @@ config SH_SIMULATOR config SH_CAYMAN bool "Hitachi Cayman" depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI config SH_HARP bool "ST50 Harp" diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index fba6b5ba0b3..172e81db953 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o +obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ dma-dreamcast.o @@ -20,3 +21,4 @@ obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o +obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c new file mode 100644 index 00000000000..980275ffa30 --- /dev/null +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -0,0 +1,94 @@ +#include +#include +#include +#include +#include +#include "pci-sh5.h" + +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int result = -1; + + /* The complication here is that the PCI IRQ lines from the Cayman's 2 + 5V slots get into the CPU via a different path from the IRQ lines + from the 3 3.3V slots. Thus, we have to detect whether the card's + interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' + at the point where we cross from 5V to 3.3V is not the normal case. + + The added complication is that we don't know that the 5V slots are + always bus 2, because a card containing a PCI-PCI bridge may be + plugged into a 3.3V slot, and this changes the bus numbering. + + Also, the Cayman has an intermediate PCI bus that goes a custom + expansion board header (and to the secondary bridge). This bus has + never been used in practice. + + The 1ary onboard PCI-PCI bridge is device 3 on bus 0 + The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of + the 1ary bridge. + */ + + struct slot_pin { + int slot; + int pin; + } path[4]; + int i=0; + + while (dev->bus->number > 0) { + + slot = path[i].slot = PCI_SLOT(dev->devfn); + pin = path[i].pin = bridge_swizzle(pin, slot); + dev = dev->bus->self; + i++; + if (i > 3) panic("PCI path to root bus too long!\n"); + } + + slot = PCI_SLOT(dev->devfn); + /* This is the slot on bus 0 through which the device is eventually + reachable. */ + + /* Now work back up. */ + if ((slot < 3) || (i == 0)) { + /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final + swizzle now. */ + result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; + } else { + i--; + slot = path[i].slot; + pin = path[i].pin; + if (slot > 0) { + panic("PCI expansion bus device found - not handled!\n"); + } else { + if (i > 0) { + /* 5V slots */ + i--; + slot = path[i].slot; + pin = path[i].pin; + /* 'pin' was swizzled earlier wrt slot, don't do it again. */ + result = IRQ_P2INTA + (pin - 1); + } else { + /* IRQ for 2ary PCI-PCI bridge : unused */ + result = -1; + } + } + } + + return result; +} + +struct pci_channel board_pci_channels[] = { + { &sh5_pci_ops, NULL, NULL, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +int __init pcibios_init_platform(void) +{ + return sh5pci_init(__pa(memory_start), + __pa(memory_end) - __pa(memory_start)); +} diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c new file mode 100644 index 00000000000..729e38a6fe0 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -0,0 +1,93 @@ +/* + * Support functions for the SH5 PCI hardware. + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pci-sh5.h" + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); + break; + case 2: + *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); + break; + case 4: + *val = SH5PCI_READ(PDR); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); + break; + case 2: + SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); + break; + case 4: + SH5PCI_WRITE(PDR, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sh5_pci_ops = { + .read = sh5pci_read, + .write = sh5pci_write, +}; diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index b4d9534d2b0..a00a4df8c02 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -18,40 +18,14 @@ #include #include #include -#include #include - +#include +#include #include -#include -#include "pci_sh5.h" - -static unsigned long pcicr_virt; -unsigned long pciio_virt; - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); +#include "pci-sh5.h" -char * __devinit pcibios_setup(char *str) -{ - return str; -} +unsigned long pcicr_virt; +unsigned long PCI_IO_AREA; /* Rounds a number UP to the nearest power of two. Used for * sizing the PCI window. @@ -79,31 +53,73 @@ static u32 __init r2p2(u32 num) return tmp; } -extern unsigned long long memory_start, memory_end; +static irqreturn_t pcish5_err_irq(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + unsigned pci_int, pci_air, pci_cir, pci_aint; + + pci_int = SH5PCI_READ(INT); + pci_cir = SH5PCI_READ(CIR); + pci_air = SH5PCI_READ(AIR); -int __init sh5pci_init(unsigned memStart, unsigned memSize) + if (pci_int) { + printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); + printk("PCI INT -> 0x%x\n", pci_int & 0xffff); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(INT, ~0); + } + + pci_aint = SH5PCI_READ(AINT); + if (pci_aint) { + printk("PCI ARB INTERRUPT!\n"); + printk("PCI AINT -> 0x%x\n", pci_aint); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(AINT, ~0); + } + + return IRQ_HANDLED; +} + +static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) +{ + printk("SERR IRQ\n"); + + return IRQ_NONE; +} + +int __init sh5pci_init(unsigned long memStart, unsigned long memSize) { u32 lsr0; u32 uval; + if (request_irq(IRQ_ERR, pcish5_err_irq, + IRQF_DISABLED, "PCI Error",NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); + return -EINVAL; + } + + if (request_irq(IRQ_SERR, pcish5_serr_irq, + IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); + return -EINVAL; + } + pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR"); if (!pcicr_virt) { panic("Unable to remap PCICR\n"); } - pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); - if (!pciio_virt) { + PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); + if (!PCI_IO_AREA) { panic("Unable to remap PCIIO\n"); } - pr_debug("Register base addres is 0x%08lx\n", pcicr_virt); - /* Clear snoop registers */ SH5PCI_WRITE(CSCR0, 0); SH5PCI_WRITE(CSCR1, 0); - pr_debug("Wrote to reg\n"); - /* Switch off interrupts */ SH5PCI_WRITE(INTM, 0); SH5PCI_WRITE(AINTM, 0); @@ -113,16 +129,17 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize) uval = SH5PCI_READ(CR); /* Set command Register */ - SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM); + SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | + CR_PFCS | CR_BMAM); uval=SH5PCI_READ(CR); - pr_debug("CR is actually 0x%08x\n",uval); /* Allow it to be a master */ /* NB - WE DISABLE I/O ACCESS to stop overlap */ /* set WAIT bit to enable stepping, an attempt to improve stability */ SH5PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT); + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_WAIT); /* ** Set translation mapping memory in order to convert the address @@ -143,32 +160,30 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize) SH5PCI_WRITE(IOBR,0x0); - pr_debug("PCI:Writing 0x%08x to IOBR\n",0); - /* Set up a 256K window. Totally pointless waste of address space */ SH5PCI_WRITE(IOBMR,0); - pr_debug("PCI:Writing 0x%08x to IOBMR\n",0); - /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally, - * we would want to map the I/O region somewhere, but it is so big this is not - * that easy! + /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. + * Ideally, we would want to map the I/O region somewhere, but it + * is so big this is not that easy! */ SH5PCI_WRITE(CSR_IBAR0,~0); /* Set memory size value */ memSize = memory_end - memory_start; - /* Now we set up the mbars so the PCI bus can see the memory of the machine */ - if (memSize < (1024 * 1024)) { - printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize); + /* Now we set up the mbars so the PCI bus can see the memory of + * the machine */ + if (memSize < (1024 * 1024)) { + printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n", + memSize); return -EINVAL; } /* Set LSR 0 */ - lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1); + lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : + ((r2p2(memSize) - 0x100000) | 0x1); SH5PCI_WRITE(LSR0, lsr0); - pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0); - /* Set MBAR 0 */ SH5PCI_WRITE(CSR_MBAR0, memory_start); SH5PCI_WRITE(LAR0, memory_start); @@ -177,334 +192,21 @@ int __init sh5pci_init(unsigned memStart, unsigned memSize) SH5PCI_WRITE(LAR1,0); SH5PCI_WRITE(LSR1,0); - pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start); - pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start); - /* Enable the PCI interrupts on the device */ SH5PCI_WRITE(INTM, ~0); SH5PCI_WRITE(AINTM, ~0); SH5PCI_WRITE(PINTM, ~0); - pr_debug("Switching on all error interrupts\n"); - - return(0); -} - -static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = SH5PCI_READ(PDR); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - SH5PCI_WRITE(PDR, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops pci_config_ops = { - .read = sh5pci_read, - .write = sh5pci_write, -}; - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - - -static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) -{ - pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n", - dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin); - return PCI_SLOT(dev->devfn); -} - -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin-1) + slot) % 4) + 1; -} - -u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp) -{ - if (dev->bus->number != 0) { - u8 pin = *pinp; - do { - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - /* Move up the chain of bridges. */ - dev = dev->bus->self; - } while (dev->bus->self); - *pinp = pin; - - /* The slot is the slot of the last bridge. */ - } - - return PCI_SLOT(dev->devfn); -} - -/* This needs to be shunted out of here into the board specific bit */ - -static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int result = -1; - - /* The complication here is that the PCI IRQ lines from the Cayman's 2 - 5V slots get into the CPU via a different path from the IRQ lines - from the 3 3.3V slots. Thus, we have to detect whether the card's - interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' - at the point where we cross from 5V to 3.3V is not the normal case. - - The added complication is that we don't know that the 5V slots are - always bus 2, because a card containing a PCI-PCI bridge may be - plugged into a 3.3V slot, and this changes the bus numbering. - - Also, the Cayman has an intermediate PCI bus that goes a custom - expansion board header (and to the secondary bridge). This bus has - never been used in practice. - - The 1ary onboard PCI-PCI bridge is device 3 on bus 0 - The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge. - */ - - struct slot_pin { - int slot; - int pin; - } path[4]; - int i=0; - - while (dev->bus->number > 0) { - - slot = path[i].slot = PCI_SLOT(dev->devfn); - pin = path[i].pin = bridge_swizzle(pin, slot); - dev = dev->bus->self; - i++; - if (i > 3) panic("PCI path to root bus too long!\n"); - } - - slot = PCI_SLOT(dev->devfn); - /* This is the slot on bus 0 through which the device is eventually - reachable. */ - - /* Now work back up. */ - if ((slot < 3) || (i == 0)) { - /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final - swizzle now. */ - result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; - } else { - i--; - slot = path[i].slot; - pin = path[i].pin; - if (slot > 0) { - panic("PCI expansion bus device found - not handled!\n"); - } else { - if (i > 0) { - /* 5V slots */ - i--; - slot = path[i].slot; - pin = path[i].pin; - /* 'pin' was swizzled earlier wrt slot, don't do it again. */ - result = IRQ_P2INTA + (pin - 1); - } else { - /* IRQ for 2ary PCI-PCI bridge : unused */ - result = -1; - } - } - } - - return result; -} - -static irqreturn_t pcish5_err_irq(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - unsigned pci_int, pci_air, pci_cir, pci_aint; - - pci_int = SH5PCI_READ(INT); - pci_cir = SH5PCI_READ(CIR); - pci_air = SH5PCI_READ(AIR); - - if (pci_int) { - printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); - printk("PCI INT -> 0x%x\n", pci_int & 0xffff); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(INT, ~0); - } - - pci_aint = SH5PCI_READ(AINT); - if (pci_aint) { - printk("PCI ARB INTERRUPT!\n"); - printk("PCI AINT -> 0x%x\n", pci_aint); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(AINT, ~0); - } - - return IRQ_HANDLED; -} - -static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) -{ - printk("SERR IRQ\n"); - - return IRQ_NONE; -} - -static void __init -pcibios_size_bridge(struct pci_bus *bus, struct resource *ior, - struct resource *memr) -{ - struct resource io_res, mem_res; - struct pci_dev *dev; - struct pci_dev *bridge = bus->self; - struct list_head *ln; - - if (!bridge) - return; /* host bridge, nothing to do */ - - /* set reasonable default locations for pcibios_align_resource */ - io_res.start = PCIBIOS_MIN_IO; - mem_res.start = PCIBIOS_MIN_MEM; - - io_res.end = io_res.start; - mem_res.end = mem_res.start; - - /* Collect information about how our direct children are layed out. */ - for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) { - int i; - dev = pci_dev_b(ln); - - /* Skip bridges for now */ - if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI) - continue; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource res; - unsigned long size; - - memcpy(&res, &dev->resource[i], sizeof(res)); - size = res.end - res.start + 1; - - if (res.flags & IORESOURCE_IO) { - res.start = io_res.end; - pcibios_align_resource(dev, &res, size, 0); - io_res.end = res.start + size; - } else if (res.flags & IORESOURCE_MEM) { - res.start = mem_res.end; - pcibios_align_resource(dev, &res, size, 0); - mem_res.end = res.start + size; - } - } - } - - /* And for all of the subordinate busses. */ - for (ln=bus->children.next; ln != &bus->children; ln=ln->next) - pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res); - - /* turn the ending locations into sizes (subtract start) */ - io_res.end -= io_res.start; - mem_res.end -= mem_res.start; - - /* Align the sizes up by bridge rules */ - io_res.end = ALIGN(io_res.end, 4*1024) - 1; - mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1; - - /* Adjust the bridge's allocation requirements */ - bridge->resource[0].end = bridge->resource[0].start + io_res.end; - bridge->resource[1].end = bridge->resource[1].start + mem_res.end; - - bridge->resource[PCI_BRIDGE_RESOURCES].end = - bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end; - bridge->resource[PCI_BRIDGE_RESOURCES+1].end = - bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end; - - /* adjust parent's resource requirements */ - if (ior) { - ior->end = ALIGN(ior->end, 4*1024); - ior->end += io_res.end; - } - - if (memr) { - memr->end = ALIGN(memr->end, 1*1024*1024); - memr->end += mem_res.end; - } -} - -static void __init pcibios_size_bridges(void) -{ - struct resource io_res, mem_res; - - memset(&io_res, 0, sizeof(io_res)); - memset(&mem_res, 0, sizeof(mem_res)); - - pcibios_size_bridge(pci_root_bus, &io_res, &mem_res); -} - -static int __init pcibios_init(void) -{ - if (request_irq(IRQ_ERR, pcish5_err_irq, - IRQF_DISABLED, "PCI Error",NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); - return -EINVAL; - } - - if (request_irq(IRQ_SERR, pcish5_serr_irq, - IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); - return -EINVAL; - } - - /* The pci subsystem needs to know where memory is and how much - * of it there is. I've simply made these globals. A better mechanism - * is probably needed. - */ - sh5pci_init(__pa(memory_start), - __pa(memory_end) - __pa(memory_start)); - - pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL); - pcibios_size_bridges(); - pci_assign_unassigned_resources(); - pci_fixup_irqs(no_swizzle, map_cayman_irq); - return 0; } -subsys_initcall(pcibios_init); - void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; int i; -#if 1 - if(dev) { - for(i=0; i<3; i++) { + if (dev) { + for (i= 0; i < 3; i++) { bus->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; bus->resource[i]->name = bus->name; @@ -514,23 +216,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) /* For now, propagate host limits to the bus; * we'll adjust them later. */ - -#if 1 bus->resource[0]->end = 64*1024 - 1 ; bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; bus->resource[0]->start = PCIBIOS_MIN_IO; bus->resource[1]->start = PCIBIOS_MIN_MEM; -#else - bus->resource[0]->end = 0; - bus->resource[1]->end = 0; - bus->resource[0]->start =0; - bus->resource[1]->start = 0; -#endif + /* Turn off downstream PF memory address range by default */ bus->resource[2]->start = 1024*1024; bus->resource[2]->end = bus->resource[2]->start - 1; } -#endif - } - diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index c71159dd04b..7cff3fc04d3 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -6,6 +6,8 @@ * * Definitions for the SH5 PCI hardware. */ +#ifndef __PCI_SH5_H +#define __PCI_SH5_H /* Product ID */ #define PCISH5_PID 0x350d @@ -73,13 +75,12 @@ #define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */ #define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */ - - /* Base address of registers */ #define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000) #define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000) /* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */ +extern unsigned long pcicr_virt; /* Register selection macro */ #define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x)) /* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ @@ -104,4 +105,9 @@ #define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18) #define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18) +extern struct pci_ops sh5_pci_ops; + +/* arch/sh/drivers/pci/pci-sh5.c */ +int sh5pci_init(unsigned long memStart, unsigned long memSize); +#endif /* __PCI_SH5_H */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index ccaba368ac9..49b435c3a57 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -71,7 +71,7 @@ subsys_initcall(pcibios_init); * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) { pci_read_bridge_bases(bus); } diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h index 2757ce096ff..df1d383e18a 100644 --- a/include/asm-sh/pci.h +++ b/include/asm-sh/pci.h @@ -38,9 +38,12 @@ extern struct pci_channel board_pci_channels[]; #if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) #define PCI_IO_AREA 0xFE400000 #define PCI_IO_SIZE 0x00400000 +#elif defined(CONFIG_CPU_SH5) +extern unsigned long PCI_IO_AREA; +#define PCI_IO_SIZE 0x00010000 #else #define PCI_IO_AREA 0xFE240000 -#define PCI_IO_SIZE 0X00040000 +#define PCI_IO_SIZE 0x00040000 #endif #define PCI_MEM_SIZE 0x01000000 -- cgit v1.2.3-70-g09d2 From 332fd57b92d26e2ac6112340b98e92bb76117a41 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 22 Nov 2007 17:30:50 +0900 Subject: sh: Bring the SH-5 FPU in line with the SH-4 FPU API. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh5/fpu.c | 16 +++++++--------- arch/sh/kernel/process_64.c | 4 ++-- arch/sh/kernel/ptrace_64.c | 4 ++-- arch/sh/kernel/signal_64.c | 2 +- arch/sh/kernel/traps_64.c | 4 ++-- include/asm-sh/fpu.h | 44 +++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/processor.h | 2 +- include/asm-sh/processor_32.h | 26 ------------------------- include/asm-sh/processor_64.h | 16 ---------------- 9 files changed, 59 insertions(+), 59 deletions(-) create mode 100644 include/asm-sh/fpu.h (limited to 'include') diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c index d3f5e7468df..5a391b1a00e 100644 --- a/arch/sh/kernel/cpu/sh5/fpu.c +++ b/arch/sh/kernel/cpu/sh5/fpu.c @@ -30,12 +30,12 @@ static union sh_fpu_union init_fpuregs = { .hard = { - .fp_regs = { [0 ... 63] = sNAN32 }, - .fpscr = FPSCR_INIT + .fp_regs = { [0 ... 63] = sNAN32 }, + .fpscr = FPSCR_INIT } }; -inline void fpsave(struct sh_fpu_hard_struct *fpregs) +void save_fpu(struct task_struct *tsk, struct pt_regs *regs) { asm volatile("fst.p %0, (0*8), fp0\n\t" "fst.p %0, (1*8), fp2\n\t" @@ -73,11 +73,10 @@ inline void fpsave(struct sh_fpu_hard_struct *fpregs) "fgetscr fr63\n\t" "fst.s %0, (32*8), fr63\n\t" : /* no output */ - : "r" (fpregs) + : "r" (&tsk->thread.fpu.hard) : "memory"); } - static inline void fpload(struct sh_fpu_hard_struct *fpregs) { @@ -153,10 +152,10 @@ do_fpu_state_restore(unsigned long ex, struct pt_regs *regs) return; enable_fpu(); - if (last_task_used_math != NULL) { + if (last_task_used_math != NULL) /* Other processes fpu state, save away */ - fpsave(&last_task_used_math->thread.fpu.hard); - } + save_fpu(last_task_used_math, regs); + last_task_used_math = current; if (used_math()) { fpload(¤t->thread.fpu.hard); @@ -167,4 +166,3 @@ do_fpu_state_restore(unsigned long ex, struct pt_regs *regs) } disable_fpu(); } - diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 2dd97eecb44..973dd1a3d29 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -480,7 +480,7 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) if (fpvalid) { if (current == last_task_used_math) { enable_fpu(); - fpsave(&tsk->thread.fpu.hard); + save_fpu(tsk, regs); disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; @@ -507,7 +507,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, #ifdef CONFIG_SH_FPU if(last_task_used_math == current) { enable_fpu(); - fpsave(¤t->thread.fpu.hard); + save_fpu(current, regs); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 51bb546365c..e9cc6ebd2ce 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -75,7 +75,7 @@ get_fpu_long(struct task_struct *task, unsigned long addr) if (last_task_used_math == task) { enable_fpu(); - fpsave(&task->thread.fpu.hard); + save_fpu(task, regs); disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; @@ -111,7 +111,7 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) set_stopped_child_used_math(task); } else if (last_task_used_math == task) { enable_fpu(); - fpsave(&task->thread.fpu.hard); + save_fpu(task, regs); disable_fpu(); last_task_used_math = 0; regs->sr |= SR_FD; diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 08f403e2366..922891960c3 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -212,7 +212,7 @@ setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) if (current == last_task_used_math) { enable_fpu(); - fpsave(¤t->thread.fpu.hard); + save_fpu(current, regs); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index 0f4ea3ac3e0..b8020f26b63 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -618,7 +618,7 @@ static int misaligned_fpu_load(struct pt_regs *regs, indexed by register number. */ if (last_task_used_math == current) { enable_fpu(); - fpsave(¤t->thread.fpu.hard); + save_fpu(current, regs); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; @@ -691,7 +691,7 @@ static int misaligned_fpu_store(struct pt_regs *regs, indexed by register number. */ if (last_task_used_math == current) { enable_fpu(); - fpsave(¤t->thread.fpu.hard); + save_fpu(current, regs); disable_fpu(); last_task_used_math = NULL; regs->sr |= SR_FD; diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h new file mode 100644 index 00000000000..33db698a6b4 --- /dev/null +++ b/include/asm-sh/fpu.h @@ -0,0 +1,44 @@ +#ifndef __ASM_SH_FPU_H +#define __ASM_SH_FPU_H + +#define SR_FD 0x00008000 + +#ifndef __ASSEMBLY__ +#include + +#ifdef CONFIG_SH_FPU +static inline void release_fpu(struct pt_regs *regs) +{ + regs->sr |= SR_FD; +} + +static inline void grab_fpu(struct pt_regs *regs) +{ + regs->sr &= ~SR_FD; +} + +struct task_struct; + +extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); +#else +#define release_fpu(regs) do { } while (0) +#define grab_fpu(regs) do { } while (0) +#define save_fpu(tsk, regs) do { } while (0) +#endif + +#define unlazy_fpu(tsk, regs) do { \ + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ + save_fpu(tsk, regs); \ + } \ +} while (0) + +#define clear_fpu(tsk, regs) do { \ + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ + clear_tsk_thread_flag(tsk, TIF_USEDFPU); \ + release_fpu(regs); \ + } \ +} while (0) + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_FPU_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index f3bd82e9589..3ae2a1c223f 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,9 +2,9 @@ #define __ASM_SH_PROCESSOR_H #include +#include #ifndef __ASSEMBLY__ - /* * CPU type and hardware bug flags. Kept separately for each CPU. * diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index 1ad74633c00..a7edaa1a870 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -65,7 +65,6 @@ extern struct sh_cpuinfo cpu_data[]; * IMASK-bit: * Interrupt level mask */ -#define SR_FD 0x00008000 #define SR_DSP 0x00001000 #define SR_IMASK 0x000000f0 @@ -178,31 +177,6 @@ static __inline__ void enable_fpu(void) : "r" (~SR_FD)); } -static __inline__ void release_fpu(struct pt_regs *regs) -{ - regs->sr |= SR_FD; -} - -static __inline__ void grab_fpu(struct pt_regs *regs) -{ - regs->sr &= ~SR_FD; -} - -extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); - -#define unlazy_fpu(tsk, regs) do { \ - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ - save_fpu(tsk, regs); \ - } \ -} while (0) - -#define clear_fpu(tsk, regs) do { \ - if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ - clear_tsk_thread_flag(tsk, TIF_USEDFPU); \ - release_fpu(regs); \ - } \ -} while (0) - /* Double presision, NANS as NANS, rounding to nearest, no exceptions */ #define FPSCR_INIT 0x00080000 diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index f5464822923..99c22b14a85 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -102,8 +102,6 @@ extern struct sh_cpuinfo cpu_data[]; * Single step bit * */ -#define SR_FD 0x00008000 - #if defined(CONFIG_SH64_SR_WATCH) #define SR_MMU 0x84000000 #else @@ -243,16 +241,6 @@ static inline void enable_fpu(void) : "r" (~SR_FD)); } -static inline void release_fpu(struct pt_regs *regs) -{ - regs->sr |= SR_FD; -} - -static inline void grab_fpu(struct pt_regs *regs) -{ - regs->sr &= ~SR_FD; -} - /* Round to nearest, no exceptions on inexact, overflow, underflow, zero-divide, invalid. Configure option for whether to flush denorms to zero, or except if a denorm is encountered. */ @@ -263,13 +251,9 @@ static inline void grab_fpu(struct pt_regs *regs) #endif #ifdef CONFIG_SH_FPU -/* Save the current FP regs */ -void fpsave(struct sh_fpu_hard_struct *fpregs); - /* Initialise the FP state of a task */ void fpinit(struct sh_fpu_hard_struct *fpregs); #else -#define fpsave(fpregs) do { } while (0) #define fpinit(fpregs) do { } while (0) #endif -- cgit v1.2.3-70-g09d2 From b000659b1c07f91f0c73bf94bb8922fa740c0ef0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 23 Nov 2007 14:02:20 +0900 Subject: sh: Fix up bug trap handler build for sh32. Signed-off-by: Paul Mundt --- include/asm-sh/system.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 6b02dfd587e..8b01fc4a56a 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -194,7 +194,8 @@ asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ #define TRAP_HANDLER_DECL \ struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ - unsigned int vec = regs->tra; + unsigned int vec = regs->tra; \ + (void)vec; #else #define BUILD_TRAP_HANDLER(name) \ asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) -- cgit v1.2.3-70-g09d2 From 1322b9def91ab8e9e673b58a64e13d6effaaa652 Mon Sep 17 00:00:00 2001 From: Yuichi Nakamura Date: Sat, 10 Nov 2007 19:21:34 +0900 Subject: sh: syscall audit support. Support syscall auditing.. Signed-off-by: Yuichi Nakamura Signed-off-by: Paul Mundt --- arch/sh/kernel/entry-common.S | 8 ++++++-- arch/sh/kernel/ptrace_32.c | 21 +++++++++++++++++---- include/asm-sh/thread_info.h | 2 ++ init/Kconfig | 2 +- 4 files changed, 26 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index e0317ed080c..397ac71d97f 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -224,7 +224,7 @@ work_resched: syscall_exit_work: ! r0: current_thread_info->flags ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP, r0 + tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 #ifdef CONFIG_TRACE_IRQFLAGS @@ -234,6 +234,8 @@ syscall_exit_work: #endif sti ! XXX setup arguments... + mov r15, r4 + mov #1, r5 mov.l 4f, r0 ! do_syscall_trace jsr @r0 nop @@ -244,6 +246,8 @@ syscall_exit_work: syscall_trace_entry: ! Yes it is traced. ! XXX setup arguments... + mov r15, r4 + mov #0, r5 mov.l 4f, r11 ! Call do_syscall_trace which notifies jsr @r11 ! superior (will chomp R[0-7]) nop @@ -366,7 +370,7 @@ ENTRY(system_call) ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 - mov #_TIF_SYSCALL_TRACE, r10 + mov #(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10 tst r10, r8 bf syscall_trace_entry ! diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index ac725f0aeb7..ce0664a58b4 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -6,7 +6,7 @@ * edited by Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka - * + * Audit support: Yuichi Nakamura */ #include #include @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -248,15 +249,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void do_syscall_trace(void) +asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) { struct task_struct *tsk = current; + if (unlikely(current->audit_context) && entryexit) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), + regs->regs[0]); + if (!test_thread_flag(TIF_SYSCALL_TRACE) && !test_thread_flag(TIF_SINGLESTEP)) - return; + goto out; if (!(tsk->ptrace & PT_PTRACED)) - return; + goto out; + /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && @@ -271,4 +277,11 @@ asmlinkage void do_syscall_trace(void) send_sig(tsk->exit_code, tsk, 1); tsk->exit_code = 0; } + +out: + if (unlikely(current->audit_context) && !entryexit) + audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], + regs->regs[4], regs->regs[5], + regs->regs[6], regs->regs[7]); + } diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index d49ee9d868e..c6577d3dc46 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -113,6 +113,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ #define TIF_SINGLESTEP 4 /* singlestepping active */ +#define TIF_SYSCALL_AUDIT 5 #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 @@ -123,6 +124,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NEED_RESCHED (1< Date: Mon, 26 Nov 2007 18:17:21 +0900 Subject: sh: Add SH7203 CPU support. This adds support for the SH7203 (SH-2A) CPU. Signed-off-by: Kieran Bingham Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 8 +- arch/sh/Kconfig.debug | 1 + arch/sh/kernel/cpu/sh2a/Makefile | 1 + arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 89 +++++++++++ arch/sh/kernel/cpu/sh2a/probe.c | 19 ++- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 281 +++++++++++++++++++++++++++++++++ arch/sh/kernel/setup.c | 1 + arch/sh/kernel/timers/timer-cmt.c | 2 +- drivers/serial/sh-sci.h | 6 +- include/asm-sh/bugs.h | 2 +- include/asm-sh/cpu-sh2a/freq.h | 2 - include/asm-sh/processor.h | 2 +- 12 files changed, 399 insertions(+), 15 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7203.c create mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7203.c (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d99ba375cc8..d8f62b84265 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -158,6 +158,10 @@ config CPU_SUBTYPE_SH7619 # SH-2A Processor Support +config CPU_SUBTYPE_SH7203 + bool "Support SH7203 processor" + select CPU_SH2A + config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A @@ -556,7 +560,7 @@ config SH_PCLK_FREQ default "32000000" if CPU_SUBTYPE_SH7722 default "33333333" if CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ - CPU_SUBTYPE_SH7206 + CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -567,7 +571,7 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" - depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + depends on CPU_SH2 default 6 if CPU_SUBTYPE_SH7206 default 5 if CPU_SUBTYPE_SH7619 default 0 diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 89bc174f25c..f7e362c9d76 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -32,6 +32,7 @@ config EARLY_SCIF_CONSOLE_PORT depends on EARLY_SCIF_CONSOLE default "0xffe00000" if CPU_SUBTYPE_SH7780 default "0xffea0000" if CPU_SUBTYPE_SH7785 + default "0xfffe8000" if CPU_SUBTYPE_SH7203 default "0xfffe9800" if CPU_SUBTYPE_SH7206 default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 965fa2572b2..5286eeff1cc 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -7,3 +7,4 @@ obj-y := common.o probe.o opcode_helper.o common-y += $(addprefix ../sh2/, ex.o entry.o) obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o +obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c new file mode 100644 index 00000000000..3feb95a4fcb --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c @@ -0,0 +1,89 @@ +/* + * arch/sh/kernel/cpu/sh2a/clock-sh7203.c + * + * SH7203 support for the clock framework + * + * Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd) + * + * Based on clock-sh7263.c + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +const static int pll1rate[]={8,12,16,0}; +const static int pfc_divisors[]={1,2,3,4,6,8,12}; +#define ifc_divisors pfc_divisors + +#if (CONFIG_SH_CLK_MD == 0) +#define PLL2 (1) +#elif (CONFIG_SH_CLK_MD == 1) +#define PLL2 (2) +#elif (CONFIG_SH_CLK_MD == 2) +#define PLL2 (4) +#elif (CONFIG_SH_CLK_MD == 3) +#define PLL2 (4) +#else +#error "Illegal Clock Mode!" +#endif + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0003] * PLL2 ; +} + +static struct clk_ops sh7203_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7203_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx-2]; +} + +static struct clk_ops sh7203_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk_ops sh7203_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7203_clk_ops[] = { + &sh7203_master_clk_ops, + &sh7203_module_clk_ops, + &sh7203_bus_clk_ops, + &sh7203_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7203_clk_ops)) + *ops = sh7203_clk_ops[idx]; +} diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 6d02465704b..64f10102b72 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -3,25 +3,33 @@ * * CPU Subtype Probing for SH-2A. * - * Copyright (C) 2004, 2005 Paul Mundt + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include #include #include int __init detect_cpu_and_cache_system(void) { - /* Just SH7206 for now .. */ - boot_cpu_data.type = CPU_SH7206; + /* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */ boot_cpu_data.flags |= CPU_HAS_OP32; +#if defined(CONFIG_CPU_SUBTYPE_SH7203) + boot_cpu_data.type = CPU_SH7203; + /* SH7203 has an FPU.. */ + boot_cpu_data.flags |= CPU_HAS_FPU; +#elif defined(CONFIG_CPU_SUBTYPE_SH7206) + boot_cpu_data.type = CPU_SH7206; + /* While SH7206 has a DSP.. */ + boot_cpu_data.flags |= CPU_HAS_DSP; +#endif + boot_cpu_data.dcache.ways = 4; - boot_cpu_data.dcache.way_incr = (1 << 11); + boot_cpu_data.dcache.way_incr = (1 << 11); boot_cpu_data.dcache.sets = 128; boot_cpu_data.dcache.entry_shift = 4; boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; @@ -37,4 +45,3 @@ int __init detect_cpu_and_cache_system(void) return 0; } - diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c new file mode 100644 index 00000000000..06f27c8b858 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -0,0 +1,281 @@ +/* + * SH7203 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, + DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, + DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, + DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + USB, LCDC, CMT0, CMT1, BSC, WDT, + MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, + MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, + MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, + MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, + MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, + MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, + ADC_ADI, + IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI, + IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI, + IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI, + IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI, + SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, + SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, + SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI, + SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI, + SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, + FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + RTC_ARM, RTC_PRD, RTC_CUP, + RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE, + RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE, + + /* interrupt groups */ + PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, + IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3, + SSU0, SSU1, FLCTL, RTC, RCAN0, RCAN1 +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), + INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), + INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), + INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), + INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), + INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), + INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), + INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), + INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), + INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), + INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), + INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), + INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141), + INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143), + INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145), + INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147), + INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149), + INTC_IRQ(MTU2_TCI0V, 150), + INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152), + INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154), + INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156), + INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158), + INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160), + INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162), + INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164), + INTC_IRQ(MTU2_TCI3V, 165), + INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167), + INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169), + INTC_IRQ(MTU2_TCI4V, 170), + INTC_IRQ(ADC_ADI, 171), + INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173), + INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175), + INTC_IRQ(IIC30_TEI, 176), + INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178), + INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180), + INTC_IRQ(IIC31_TEI, 181), + INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183), + INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185), + INTC_IRQ(IIC32_TEI, 186), + INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188), + INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190), + INTC_IRQ(IIC33_TEI, 191), + INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193), + INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195), + INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197), + INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199), + INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201), + INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203), + INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205), + INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207), + INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209), + INTC_IRQ(SSU0_SSTXI, 210), + INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212), + INTC_IRQ(SSU1_SSTXI, 213), + INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215), + INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217), + INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225), + INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227), + INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232), + INTC_IRQ(RTC_CUP, 233), + INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235), + INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237), + INTC_IRQ(RCAN0_SLE, 238), + INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240), + INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242), + INTC_IRQ(RCAN1_SLE, 243), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, + PINT4, PINT5, PINT6, PINT7), + INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), + INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), + INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), + INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), + INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), + INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), + INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), + INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), + INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), + INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), + INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), + INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), + INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), + INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), + INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), + INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), + INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, + IIC30_TEI), + INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, + IIC31_TEI), + INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, + IIC32_TEI), + INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, + IIC33_TEI), + INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), + INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), + INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI), + INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, + FLCTL_FLTREQ1I), + INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP), + INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, + RCAN0_SLE), + INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, + RCAN1_SLE), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } }, + { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } }, + { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } }, + { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } }, + { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB, + MTU2_VU } }, + { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD, + MTU2_TCI4V } }, + { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } }, + { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } }, + { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } }, + { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII, + SSI3_SSII, 0 } }, + { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } }, + { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } }, +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfffe0808, 0, 16, /* PINTER */ + { 0, 0, 0, 0, 0, 0, 0, 0, + PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, + NULL, mask_registers, prio_registers, NULL); + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 193, 194, 195, 192 }, + }, { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 197, 198, 199, 196 }, + }, { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 201, 202, 203, 200 }, + }, { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 205, 206, 207, 204 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xffff2000, + .end = 0xffff2000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 232, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 233, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 231, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct platform_device *sh7203_devices[] __initdata = { + &sci_device, + &rtc_device, +}; + +static int __init sh7203_devices_setup(void) +{ + return platform_add_devices(sh7203_devices, + ARRAY_SIZE(sh7203_devices)); +} +__initcall(sh7203_devices_setup); + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 1ec40091a4e..c5a453fb19c 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -294,6 +294,7 @@ void __init setup_arch(char **cmdline_p) } static const char *cpu_name[] = { + [CPU_SH7203] = "SH7203", [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 82de6895ade..4828a53d81e 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -31,7 +31,7 @@ #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) #define CMT_CMCSR_INIT 0x0040 #define CMT_CMCSR_CALIB 0x0000 -#elif defined(CONFIG_CPU_SUBTYPE_SH7206) +#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || defined(CONFIG_CPU_SUBTYPE_SH7206) #define CMT_CMSTR 0xfffec000 #define CMT_CMCSR_0 0xfffec002 #define CMT_CMCNT_0 0xfffec004 diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index d24621ce799..cde06a48182 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -142,7 +142,8 @@ # define SCIF_OPER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7206) +#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ + defined(CONFIG_CPU_SUBTYPE_SH7206) # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ @@ -617,7 +618,8 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7206) +#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ + defined(CONFIG_CPU_SUBTYPE_SH7206) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index e2d79567e2a..94149c8a759 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -25,7 +25,7 @@ static void __init check_bugs(void) case CPU_SH7619: *p++ = '2'; break; - case CPU_SH7206: + case CPU_SH7203 ... CPU_SH7206: *p++ = '2'; *p++ = 'a'; break; diff --git a/include/asm-sh/cpu-sh2a/freq.h b/include/asm-sh/cpu-sh2a/freq.h index e518fff6d10..830fd43b6cd 100644 --- a/include/asm-sh/cpu-sh2a/freq.h +++ b/include/asm-sh/cpu-sh2a/freq.h @@ -10,9 +10,7 @@ #ifndef __ASM_CPU_SH2A_FREQ_H #define __ASM_CPU_SH2A_FREQ_H -#if defined(CONFIG_CPU_SUBTYPE_SH7206) #define FREQCR 0xfffe0010 -#endif #endif /* __ASM_CPU_SH2A_FREQ_H */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 3ae2a1c223f..70f083f07d7 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -17,7 +17,7 @@ enum cpu_type { CPU_SH7619, /* SH-2A types */ - CPU_SH7206, + CPU_SH7203, CPU_SH7206, /* SH-3 types */ CPU_SH7705, CPU_SH7706, CPU_SH7707, -- cgit v1.2.3-70-g09d2 From a8f67f4b4d4b74cd14d3540ade8657ebee543340 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 26 Nov 2007 19:54:02 +0900 Subject: sh: Add SH7263 CPU support. This adds support for the SH7263 (SH-2A) CPU. This particular CPU is a superset of SH7203, adding some additional peripheral blocks and hooking up additional (reserved on SH7203) vectors in the INTC block. No visibly nasty surprises, yet.. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 +++++- arch/sh/Kconfig.debug | 2 +- arch/sh/kernel/cpu/sh2a/Makefile | 1 + arch/sh/kernel/cpu/sh2a/probe.c | 3 +++ arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 42 ++++++++++++++++++++++++++++++++-- arch/sh/kernel/setup.c | 2 +- arch/sh/kernel/timers/timer-cmt.c | 4 +++- drivers/serial/sh-sci.h | 6 +++-- include/asm-sh/bugs.h | 2 +- include/asm-sh/processor.h | 2 +- 10 files changed, 61 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d8f62b84265..c18a5512ac8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -166,6 +166,10 @@ config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A +config CPU_SUBTYPE_SH7263 + bool "Support SH7263 processor" + select CPU_SH2A + # SH-3 Processor Support config CPU_SUBTYPE_SH7705 @@ -560,7 +564,8 @@ config SH_PCLK_FREQ default "32000000" if CPU_SUBTYPE_SH7722 default "33333333" if CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ - CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 + CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ + CPU_SUBTYPE_SH7263 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index f7e362c9d76..b0dcb240d79 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -33,7 +33,7 @@ config EARLY_SCIF_CONSOLE_PORT default "0xffe00000" if CPU_SUBTYPE_SH7780 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 - default "0xfffe9800" if CPU_SUBTYPE_SH7206 + default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 default "0xa4430000" if CPU_SUBTYPE_SH7720 diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 5286eeff1cc..50e4d0ffdd6 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -8,3 +8,4 @@ common-y += $(addprefix ../sh2/, ex.o entry.o) obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o +obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 64f10102b72..6910e266446 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -22,6 +22,9 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.type = CPU_SH7203; /* SH7203 has an FPU.. */ boot_cpu_data.flags |= CPU_HAS_FPU; +#elif defined(CONFIG_CPU_SUBTYPE_SH7263) + boot_cpu_data.type = CPU_SH7263; + boot_cpu_data.flags |= CPU_HAS_FPU; #elif defined(CONFIG_CPU_SUBTYPE_SH7206) boot_cpu_data.type = CPU_SH7206; /* While SH7206 has a DSP.. */ diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 06f27c8b858..3518f9c37d9 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -1,5 +1,5 @@ /* - * SH7203 Setup + * SH7203 and SH7263 Setup * * Copyright (C) 2007 Paul Mundt * @@ -41,17 +41,27 @@ enum { SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI, SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, + + /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */ + ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF, + ROMDEC_IREADY, + FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + + SDHI3, SDHI0, SDHI1, + RTC_ARM, RTC_PRD, RTC_CUP, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE, + SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI, + /* interrupt groups */ PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, MTU3_ABCD, MTU4_ABCD, IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3, - SSU0, SSU1, FLCTL, RTC, RCAN0, RCAN1 + SSU0, SSU1, ROMDEC, SDHI, FLCTL, RTC, RCAN0, RCAN1, SRC }; static struct intc_vect vectors[] __initdata = { @@ -125,6 +135,20 @@ static struct intc_vect vectors[] __initdata = { INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240), INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242), INTC_IRQ(RCAN1_SLE, 243), + + /* SH7263-specific trash */ +#ifdef CONFIG_CPU_SUBTYPE_SH7263 + INTC_IRQ(ROMDEC_ISY, 218), INTC_IRQ(ROMDEC_IERR, 219), + INTC_IRQ(ROMDEC_IARG, 220), INTC_IRQ(ROMDEC_ISEC, 221), + INTC_IRQ(ROMDEC_IBUF, 222), INTC_IRQ(ROMDEC_IREADY, 223), + + INTC_IRQ(SDHI3, 228), INTC_IRQ(SDHI0, 229), INTC_IRQ(SDHI1, 230), + + INTC_IRQ(SRC_OVF, 244), INTC_IRQ(SRC_ODFI, 245), + INTC_IRQ(SRC_IDEI, 246), + + INTC_IRQ(IEBI, 247), +#endif }; static struct intc_group groups[] __initdata = { @@ -167,6 +191,13 @@ static struct intc_group groups[] __initdata = { RCAN0_SLE), INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE), + +#ifdef CONFIG_CPU_SUBTYPE_SH7263 + INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, + ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY), + INTC_GROUP(SDHI, SDHI3, SDHI0, SDHI1), + INTC_GROUP(SRC, SRC_OVF, SRC_ODFI, SRC_IDEI), +#endif }; static struct intc_prio_reg prio_registers[] __initdata = { @@ -184,10 +215,17 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } }, { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } }, { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } }, +#ifdef CONFIG_CPU_SUBTYPE_SH7203 { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII, SSI3_SSII, 0 } }, { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } }, { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } }, +#else + { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII, + SSI3_SSII, ROMDEC } }, + { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, SDHI, RTC, RCAN0 } }, + { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, SRC, IEBI, 0 } }, +#endif }; static struct intc_mask_reg mask_registers[] __initdata = { diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index c5a453fb19c..6891cc93548 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -294,7 +294,7 @@ void __init setup_arch(char **cmdline_p) } static const char *cpu_name[] = { - [CPU_SH7203] = "SH7203", + [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263", [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 4828a53d81e..499e07beebe 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -31,7 +31,9 @@ #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) #define CMT_CMCSR_INIT 0x0040 #define CMT_CMCSR_CALIB 0x0000 -#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || defined(CONFIG_CPU_SUBTYPE_SH7206) +#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ + defined(CONFIG_CPU_SUBTYPE_SH7206) || \ + defined(CONFIG_CPU_SUBTYPE_SH7263) #define CMT_CMSTR 0xfffec000 #define CMT_CMCSR_0 0xfffec002 #define CMT_CMCNT_0 0xfffec004 diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index cde06a48182..0187dccfe8c 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -143,7 +143,8 @@ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) + defined(CONFIG_CPU_SUBTYPE_SH7206) || \ + defined(CONFIG_CPU_SUBTYPE_SH7263) # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ @@ -619,7 +620,8 @@ static inline int sci_rxd_in(struct uart_port *port) return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) + defined(CONFIG_CPU_SUBTYPE_SH7206) || \ + defined(CONFIG_CPU_SUBTYPE_SH7263) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xfffe8000) diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index 94149c8a759..9ce67fd5119 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -25,7 +25,7 @@ static void __init check_bugs(void) case CPU_SH7619: *p++ = '2'; break; - case CPU_SH7203 ... CPU_SH7206: + case CPU_SH7203 ... CPU_SH7263: *p++ = '2'; *p++ = 'a'; break; diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 70f083f07d7..bbbdaab8de5 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -17,7 +17,7 @@ enum cpu_type { CPU_SH7619, /* SH-2A types */ - CPU_SH7203, CPU_SH7206, + CPU_SH7203, CPU_SH7206, CPU_SH7263, /* SH-3 types */ CPU_SH7705, CPU_SH7706, CPU_SH7707, -- cgit v1.2.3-70-g09d2 From 74d99a5e262229ee865f6f68528d10b82471ead6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 26 Nov 2007 20:38:36 +0900 Subject: sh: SH-2A FPU support. Signed-off-by: Kieran Bingham Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 + arch/sh/Makefile | 4 - arch/sh/kernel/cpu/sh2/entry.S | 17 +- arch/sh/kernel/cpu/sh2a/Makefile | 2 + arch/sh/kernel/cpu/sh2a/fpu.c | 633 +++++++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh3/ex.S | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 23 +- arch/sh/kernel/traps_32.c | 13 +- include/asm-sh/fpu.h | 2 + include/asm-sh/sigcontext.h | 3 +- include/asm-sh/system.h | 2 + 11 files changed, 673 insertions(+), 30 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh2a/fpu.c (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index c18a5512ac8..2dc3b177193 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -161,6 +161,7 @@ config CPU_SUBTYPE_SH7619 config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A + select CPU_HAS_FPU config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" @@ -169,6 +170,7 @@ config CPU_SUBTYPE_SH7206 config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A + select CPU_HAS_FPU # SH-3 Processor Support diff --git a/arch/sh/Makefile b/arch/sh/Makefile index f7cbc13fd2a..292d8618248 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -20,10 +20,6 @@ isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al isa-$(CONFIG_CPU_SH5) := shmedia isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp -ifndef CONFIG_MMU -isa-y := $(isa-y)-nommu -endif - ifndef CONFIG_SH_DSP ifndef CONFIG_SH_FPU isa-y := $(isa-y)-nofpu diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 4ff2334b4a3..7a26569e795 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -149,6 +149,14 @@ ENTRY(exception_handler) mov #32,r8 cmp/hs r8,r9 bt trap_entry ! 64 > vec >= 32 is trap + +#if defined(CONFIG_SH_FPU) + mov #13,r8 + cmp/eq r8,r9 + bt 10f ! fpu + nop +#endif + mov.l 4f,r8 mov r9,r4 shll2 r9 @@ -158,6 +166,10 @@ ENTRY(exception_handler) cmp/eq r9,r8 bf 3f mov.l 8f,r8 ! unhandled exception +#if defined(CONFIG_SH_FPU) +10: + mov.l 9f, r8 ! unhandled exception +#endif 3: mov.l 5f,r10 jmp @r8 @@ -177,7 +189,10 @@ interrupt_entry: 6: .long ret_from_irq 7: .long do_IRQ 8: .long do_exception_error - +#ifdef CONFIG_SH_FPU +9: .long fpu_error_trap_handler +#endif + trap_entry: mov #0x30,r8 cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 50e4d0ffdd6..b279cdc3a23 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -6,6 +6,8 @@ obj-y := common.o probe.o opcode_helper.o common-y += $(addprefix ../sh2/, ex.o entry.o) +obj-$(CONFIG_SH_FPU) += fpu.o + obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c new file mode 100644 index 00000000000..ff99562456f --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/fpu.c @@ -0,0 +1,633 @@ +/* + * Save/restore floating point context for signal handlers. + * + * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * FIXME! These routines can be optimized in big endian case. + */ +#include +#include +#include +#include + +/* The PR (precision) bit in the FP Status Register must be clear when + * an frchg instruction is executed, otherwise the instruction is undefined. + * Executing frchg with PR set causes a trap on some SH4 implementations. + */ + +#define FPSCR_RCHG 0x00000000 + + +/* + * Save FPU registers onto task structure. + * Assume called with FPU enabled (SR.FD=0). + */ +void +save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + unsigned long dummy; + + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + enable_fpu(); + asm volatile("sts.l fpul, @-%0\n\t" + "sts.l fpscr, @-%0\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "lds %3, fpscr\n\t" + : "=r" (dummy) + : "0" ((char *)(&tsk->thread.fpu.hard.status)), + "r" (FPSCR_RCHG), + "r" (FPSCR_INIT) + : "memory"); + + disable_fpu(); + release_fpu(regs); +} + +static void +restore_fpu(struct task_struct *tsk) +{ + unsigned long dummy; + + enable_fpu(); + asm volatile("fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "lds.l @%0+, fpscr\n\t" + "lds.l @%0+, fpul\n\t" + : "=r" (dummy) + : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG) + : "memory"); + disable_fpu(); +} + +/* + * Load the FPU with signalling NANS. This bit pattern we're using + * has the property that no matter wether considered as single or as + * double precission represents signaling NANS. + */ + +static void +fpu_init(void) +{ + enable_fpu(); + asm volatile("lds %0, fpul\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "lds %2, fpscr\n\t" + : /* no output */ + : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT)); + disable_fpu(); +} + +/* + * Emulate arithmetic ops on denormalized number for some FPU insns. + */ + +/* denormalized float * float */ +static int denormal_mulf(int hx, int hy) +{ + unsigned int ix, iy; + unsigned long long m, n; + int exp, w; + + ix = hx & 0x7fffffff; + iy = hy & 0x7fffffff; + if (iy < 0x00800000 || ix == 0) + return ((hx ^ hy) & 0x80000000); + + exp = (iy & 0x7f800000) >> 23; + ix &= 0x007fffff; + iy = (iy & 0x007fffff) | 0x00800000; + m = (unsigned long long)ix * iy; + n = m; + w = -1; + while (n) { n >>= 1; w++; } + + /* FIXME: use guard bits */ + exp += w - 126 - 46; + if (exp > 0) + ix = ((int) (m >> (w - 23)) & 0x007fffff) | (exp << 23); + else if (exp + 22 >= 0) + ix = (int) (m >> (w - 22 - exp)) & 0x007fffff; + else + ix = 0; + + ix |= (hx ^ hy) & 0x80000000; + return ix; +} + +/* denormalized double * double */ +static void mult64(unsigned long long x, unsigned long long y, + unsigned long long *highp, unsigned long long *lowp) +{ + unsigned long long sub0, sub1, sub2, sub3; + unsigned long long high, low; + + sub0 = (x >> 32) * (unsigned long) (y >> 32); + sub1 = (x & 0xffffffffLL) * (unsigned long) (y >> 32); + sub2 = (x >> 32) * (unsigned long) (y & 0xffffffffLL); + sub3 = (x & 0xffffffffLL) * (unsigned long) (y & 0xffffffffLL); + low = sub3; + high = 0LL; + sub3 += (sub1 << 32); + if (low > sub3) + high++; + low = sub3; + sub3 += (sub2 << 32); + if (low > sub3) + high++; + low = sub3; + high += (sub1 >> 32) + (sub2 >> 32); + high += sub0; + *lowp = low; + *highp = high; +} + +static inline long long rshift64(unsigned long long mh, + unsigned long long ml, int n) +{ + if (n >= 64) + return mh >> (n - 64); + return (mh << (64 - n)) | (ml >> n); +} + +static long long denormal_muld(long long hx, long long hy) +{ + unsigned long long ix, iy; + unsigned long long mh, ml, nh, nl; + int exp, w; + + ix = hx & 0x7fffffffffffffffLL; + iy = hy & 0x7fffffffffffffffLL; + if (iy < 0x0010000000000000LL || ix == 0) + return ((hx ^ hy) & 0x8000000000000000LL); + + exp = (iy & 0x7ff0000000000000LL) >> 52; + ix &= 0x000fffffffffffffLL; + iy = (iy & 0x000fffffffffffffLL) | 0x0010000000000000LL; + mult64(ix, iy, &mh, &ml); + nh = mh; + nl = ml; + w = -1; + if (nh) { + while (nh) { nh >>= 1; w++;} + w += 64; + } else + while (nl) { nl >>= 1; w++;} + + /* FIXME: use guard bits */ + exp += w - 1022 - 52 * 2; + if (exp > 0) + ix = (rshift64(mh, ml, w - 52) & 0x000fffffffffffffLL) + | ((long long)exp << 52); + else if (exp + 51 >= 0) + ix = rshift64(mh, ml, w - 51 - exp) & 0x000fffffffffffffLL; + else + ix = 0; + + ix |= (hx ^ hy) & 0x8000000000000000LL; + return ix; +} + +/* ix - iy where iy: denormal and ix, iy >= 0 */ +static int denormal_subf1(unsigned int ix, unsigned int iy) +{ + int frac; + int exp; + + if (ix < 0x00800000) + return ix - iy; + + exp = (ix & 0x7f800000) >> 23; + if (exp - 1 > 31) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x007fffff) | 0x00800000; + frac -= iy; + while (frac < 0x00800000) { + if (--exp == 0) + return frac; + frac <<= 1; + } + + return (exp << 23) | (frac & 0x007fffff); +} + +/* ix + iy where iy: denormal and ix, iy >= 0 */ +static int denormal_addf1(unsigned int ix, unsigned int iy) +{ + int frac; + int exp; + + if (ix < 0x00800000) + return ix + iy; + + exp = (ix & 0x7f800000) >> 23; + if (exp - 1 > 31) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x007fffff) | 0x00800000; + frac += iy; + if (frac >= 0x01000000) { + frac >>= 1; + ++exp; + } + + return (exp << 23) | (frac & 0x007fffff); +} + +static int denormal_addf(int hx, int hy) +{ + unsigned int ix, iy; + int sign; + + if ((hx ^ hy) & 0x80000000) { + sign = hx & 0x80000000; + ix = hx & 0x7fffffff; + iy = hy & 0x7fffffff; + if (iy < 0x00800000) { + ix = denormal_subf1(ix, iy); + if (ix < 0) { + ix = -ix; + sign ^= 0x80000000; + } + } else { + ix = denormal_subf1(iy, ix); + sign ^= 0x80000000; + } + } else { + sign = hx & 0x80000000; + ix = hx & 0x7fffffff; + iy = hy & 0x7fffffff; + if (iy < 0x00800000) + ix = denormal_addf1(ix, iy); + else + ix = denormal_addf1(iy, ix); + } + + return sign | ix; +} + +/* ix - iy where iy: denormal and ix, iy >= 0 */ +static long long denormal_subd1(unsigned long long ix, unsigned long long iy) +{ + long long frac; + int exp; + + if (ix < 0x0010000000000000LL) + return ix - iy; + + exp = (ix & 0x7ff0000000000000LL) >> 52; + if (exp - 1 > 63) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL; + frac -= iy; + while (frac < 0x0010000000000000LL) { + if (--exp == 0) + return frac; + frac <<= 1; + } + + return ((long long)exp << 52) | (frac & 0x000fffffffffffffLL); +} + +/* ix + iy where iy: denormal and ix, iy >= 0 */ +static long long denormal_addd1(unsigned long long ix, unsigned long long iy) +{ + long long frac; + long long exp; + + if (ix < 0x0010000000000000LL) + return ix + iy; + + exp = (ix & 0x7ff0000000000000LL) >> 52; + if (exp - 1 > 63) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL; + frac += iy; + if (frac >= 0x0020000000000000LL) { + frac >>= 1; + ++exp; + } + + return (exp << 52) | (frac & 0x000fffffffffffffLL); +} + +static long long denormal_addd(long long hx, long long hy) +{ + unsigned long long ix, iy; + long long sign; + + if ((hx ^ hy) & 0x8000000000000000LL) { + sign = hx & 0x8000000000000000LL; + ix = hx & 0x7fffffffffffffffLL; + iy = hy & 0x7fffffffffffffffLL; + if (iy < 0x0010000000000000LL) { + ix = denormal_subd1(ix, iy); + if (ix < 0) { + ix = -ix; + sign ^= 0x8000000000000000LL; + } + } else { + ix = denormal_subd1(iy, ix); + sign ^= 0x8000000000000000LL; + } + } else { + sign = hx & 0x8000000000000000LL; + ix = hx & 0x7fffffffffffffffLL; + iy = hy & 0x7fffffffffffffffLL; + if (iy < 0x0010000000000000LL) + ix = denormal_addd1(ix, iy); + else + ix = denormal_addd1(iy, ix); + } + + return sign | ix; +} + +/** + * denormal_to_double - Given denormalized float number, + * store double float + * + * @fpu: Pointer to sh_fpu_hard structure + * @n: Index to FP register + */ +static void +denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) +{ + unsigned long du, dl; + unsigned long x = fpu->fpul; + int exp = 1023 - 126; + + if (x != 0 && (x & 0x7f800000) == 0) { + du = (x & 0x80000000); + while ((x & 0x00800000) == 0) { + x <<= 1; + exp--; + } + x &= 0x007fffff; + du |= (exp << 20) | (x >> 3); + dl = x << 29; + + fpu->fp_regs[n] = du; + fpu->fp_regs[n+1] = dl; + } +} + +/** + * ieee_fpe_handler - Handle denormalized number exception + * + * @regs: Pointer to register structure + * + * Returns 1 when it's handled (should not cause exception). + */ +static int +ieee_fpe_handler (struct pt_regs *regs) +{ + unsigned short insn = *(unsigned short *) regs->pc; + unsigned short finsn; + unsigned long nextpc; + int nib[4] = { + (insn >> 12) & 0xf, + (insn >> 8) & 0xf, + (insn >> 4) & 0xf, + insn & 0xf}; + + if (nib[0] == 0xb || + (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ + regs->pr = regs->pc + 4; + if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ + nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + else + nextpc = regs->pc + 4; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4; + else + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x4 && nib[3] == 0xb && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */ + nextpc = regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x0 && nib[3] == 0x3 && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */ + nextpc = regs->pc + 4 + regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (insn == 0x000b) { /* rts */ + nextpc = regs->pr; + finsn = *(unsigned short *) (regs->pc + 2); + } else { + nextpc = regs->pc + 2; + finsn = insn; + } + +#define FPSCR_FPU_ERROR (1 << 17) + + if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */ + struct task_struct *tsk = current; + + if ((tsk->thread.fpu.hard.fpscr & FPSCR_FPU_ERROR)) { + /* FPU error */ + denormal_to_double (&tsk->thread.fpu.hard, + (finsn >> 8) & 0xf); + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00f) == 0xf002) { /* fmul */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & (1 << 19); + + if ((fpscr & FPSCR_FPU_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal */ + llx = ((long long) hx << 32) + | tsk->thread.fpu.hard.fp_regs[n+1]; + lly = ((long long) hy << 32) + | tsk->thread.fpu.hard.fp_regs[m+1]; + if ((hx & 0x7fffffff) >= 0x00100000) + llx = denormal_muld(lly, llx); + else + llx = denormal_muld(llx, lly); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_FPU_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal */ + if ((hx & 0x7fffffff) >= 0x00800000) + hx = denormal_mulf(hy, hx); + else + hx = denormal_mulf(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00e) == 0xf000) { /* fadd, fsub */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & (1 << 19); + + if ((fpscr & FPSCR_FPU_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal */ + llx = ((long long) hx << 32) + | tsk->thread.fpu.hard.fp_regs[n+1]; + lly = ((long long) hy << 32) + | tsk->thread.fpu.hard.fp_regs[m+1]; + if ((finsn & 0xf00f) == 0xf000) + llx = denormal_addd(llx, lly); + else + llx = denormal_addd(llx, lly ^ (1LL << 63)); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_FPU_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal */ + if ((finsn & 0xf00f) == 0xf000) + hx = denormal_addf(hx, hy); + else + hx = denormal_addf(hx, hy ^ 0x80000000); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } + + return 0; +} + +BUILD_TRAP_HANDLER(fpu_error) +{ + struct task_struct *tsk = current; + TRAP_HANDLER_DECL; + + save_fpu(tsk, regs); + if (ieee_fpe_handler(regs)) { + tsk->thread.fpu.hard.fpscr &= + ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); + grab_fpu(regs); + restore_fpu(tsk); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + return; + } + + force_sig(SIGFPE, tsk); +} + +BUILD_TRAP_HANDLER(fpu_state_restore) +{ + struct task_struct *tsk = current; + TRAP_HANDLER_DECL; + + grab_fpu(regs); + if (!user_mode(regs)) { + printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); + return; + } + + if (used_math()) { + /* Using the FPU again. */ + restore_fpu(tsk); + } else { + /* First time FPU user. */ + fpu_init(); + set_used_math(); + } + set_tsk_thread_flag(tsk, TIF_USEDFPU); +} diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index b6abf38d3a8..11b6d9c6eda 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -36,7 +36,7 @@ ENTRY(exception_handling_table) .long exception_error ! address error store /* 100 */ #endif #if defined(CONFIG_SH_FPU) - .long do_fpu_error /* 120 */ + .long fpu_error_trap_handler /* 120 */ #else .long exception_error /* 120 */ #endif diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index c5a4fc77fa0..e624180b446 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -82,8 +82,8 @@ save_fpu(struct task_struct *tsk, struct pt_regs *regs) "r" (FPSCR_INIT) : "memory"); - disable_fpu(); - release_fpu(regs); + disable_fpu(); + release_fpu(regs); } static void @@ -91,7 +91,7 @@ restore_fpu(struct task_struct *tsk) { unsigned long dummy; - enable_fpu(); + enable_fpu(); asm volatile("lds %2, fpscr\n\t" "fmov.s @%0+, fr0\n\t" "fmov.s @%0+, fr1\n\t" @@ -138,7 +138,7 @@ restore_fpu(struct task_struct *tsk) /* * Load the FPU with signalling NANS. This bit pattern we're using * has the property that no matter wether considered as single or as - * double precision represents signaling NANS. + * double precision represents signaling NANS. */ static void @@ -184,7 +184,7 @@ fpu_init(void) "lds %2, fpscr\n\t" : /* no output */ : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT)); - disable_fpu(); + disable_fpu(); } /** @@ -238,7 +238,6 @@ ieee_fpe_handler (struct pt_regs *regs) if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ regs->pr = regs->pc + 4; - if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); finsn = *(unsigned short *) (regs->pc + 2); @@ -293,12 +292,10 @@ ieee_fpe_handler (struct pt_regs *regs) return 0; } -asmlinkage void -do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, struct pt_regs __regs) +BUILD_TRAP_HANDLER(fpu_error) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; + TRAP_HANDLER_DECL; if (ieee_fpe_handler(regs)) return; @@ -308,12 +305,10 @@ do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, force_sig(SIGFPE, tsk); } -asmlinkage void -do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, struct pt_regs __regs) +BUILD_TRAP_HANDLER(fpu_state_restore) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; + TRAP_HANDLER_DECL; grab_fpu(regs); if (!user_mode(regs)) { diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index 0d05fb3c48e..2e58f7a6b74 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -662,11 +662,6 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, } #endif -/* arch/sh/kernel/cpu/sh4/fpu.c */ -extern int do_fpu_inst(unsigned short, struct pt_regs *); -extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, struct pt_regs __regs); - asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs __regs) @@ -853,11 +848,11 @@ void __init trap_init(void) set_exception_table_evt(0x820, do_illegal_slot_inst); #elif defined(CONFIG_SH_FPU) #ifdef CONFIG_CPU_SUBTYPE_SHX3 - set_exception_table_evt(0xd80, do_fpu_state_restore); - set_exception_table_evt(0xda0, do_fpu_state_restore); + set_exception_table_evt(0xd80, fpu_state_restore_trap_handler); + set_exception_table_evt(0xda0, fpu_state_restore_trap_handler); #else - set_exception_table_evt(0x800, do_fpu_state_restore); - set_exception_table_evt(0x820, do_fpu_state_restore); + set_exception_table_evt(0x800, fpu_state_restore_trap_handler); + set_exception_table_evt(0x820, fpu_state_restore_trap_handler); #endif #endif diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h index 33db698a6b4..f8429880a27 100644 --- a/include/asm-sh/fpu.h +++ b/include/asm-sh/fpu.h @@ -26,6 +26,8 @@ extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); #define save_fpu(tsk, regs) do { } while (0) #endif +extern int do_fpu_inst(unsigned short, struct pt_regs *); + #define unlazy_fpu(tsk, regs) do { \ if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \ save_fpu(tsk, regs); \ diff --git a/include/asm-sh/sigcontext.h b/include/asm-sh/sigcontext.h index 8583143fa28..8ce1435bc0b 100644 --- a/include/asm-sh/sigcontext.h +++ b/include/asm-sh/sigcontext.h @@ -25,7 +25,8 @@ struct sigcontext { unsigned long sc_mach; unsigned long sc_macl; -#if defined(__SH4__) || defined(CONFIG_CPU_SH4) +#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ + defined(__SH2A__) || defined(CONFIG_CPU_SH2A) /* FPU registers */ unsigned long sc_fpregs[16]; unsigned long sc_xfpregs[16]; diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 8b01fc4a56a..ad3d2a63613 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -205,6 +205,8 @@ asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) BUILD_TRAP_HANDLER(address_error); BUILD_TRAP_HANDLER(debug); BUILD_TRAP_HANDLER(bug); +BUILD_TRAP_HANDLER(fpu_error); +BUILD_TRAP_HANDLER(fpu_state_restore); #define arch_align_stack(x) (x) -- cgit v1.2.3-70-g09d2 From eddeeb32fe303910c58c4e3c27fde4b6f1503350 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Mon, 26 Nov 2007 21:32:40 +0900 Subject: sh: Invalidate the TLB after applying PMB mappings. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/mm/pmb.c | 6 ++++++ include/asm-sh/cpu-sh4/mmu_context.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'include') diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 1d45b82f0a6..b632051d6ce 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -27,6 +27,7 @@ #include #include #include +#include #define NR_PMB_ENTRIES 16 @@ -329,6 +330,11 @@ static int __init pmb_init(void) /* PMB.SE and UB[7] */ ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR); + /* Flush out the TLB */ + i = ctrl_inl(MMUCR); + i |= MMUCR_TI; + ctrl_outl(i, MMUCR); + back_to_P1(); return 0; diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h index 979acddc0f8..fdd56e3e3a3 100644 --- a/include/asm-sh/cpu-sh4/mmu_context.h +++ b/include/asm-sh/cpu-sh4/mmu_context.h @@ -22,6 +22,8 @@ #define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 #define MMU_PAGE_ASSOC_BIT 0x80 +#define MMUCR_TI (1<<2) + #ifdef CONFIG_X2TLB #define MMUCR_ME (1 << 7) #else -- cgit v1.2.3-70-g09d2 From 66d485b45a5493f6a2ca067c6f472e7b2ca342c2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 27 Nov 2007 15:57:30 +0900 Subject: sh: Bump up ARCH_KMALLOC_MINALIGN for DMA cases. Signed-off-by: Paul Mundt --- include/asm-sh/page.h | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 407bf5a1493..bff635a078c 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -138,22 +138,18 @@ typedef struct { unsigned long pgd; } pgd_t; #endif /* - * Slub defaults to 8-byte alignment, we're only interested in 4. - * Slab defaults to BYTES_PER_WORD, which ends up being the same anyways. + * Some drivers need to perform DMA into kmalloc'ed buffers + * and so we have to increase the kmalloc minalign for this. */ -#ifdef CONFIG_SUPERH32 -#define ARCH_KMALLOC_MINALIGN 4 -#define ARCH_SLAB_MINALIGN 4 -#else -/* If gcc inlines memset, it will use st.q instructions. Therefore, we need - kmalloc allocations to be 8-byte aligned. Without this, the alignment - becomes BYTE_PER_WORD i.e. only 4 (since sizeof(long)==sizeof(void*)==4 on - sh64 at the moment). */ -#define ARCH_KMALLOC_MINALIGN 8 +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES +#ifdef CONFIG_SUPERH64 /* - * We want 8-byte alignment for the slab caches as well, otherwise we have - * the same BYTES_PER_WORD (sizeof(void *)) min align in kmem_cache_create(). + * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still + * happily generate {ld/st}.q pairs, requiring us to have 8-byte + * alignment to avoid traps. The kmalloc alignment is gauranteed by + * virtue of L1_CACHE_BYTES, requiring this to only be special cased + * for slab caches. */ #define ARCH_SLAB_MINALIGN 8 #endif -- cgit v1.2.3-70-g09d2 From 3ee7702903c346fc814bd7540ba37eebef75054d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 28 Nov 2007 15:56:27 +0900 Subject: sh: CCR1->CCR renaming for SH-2 parts. Avoid namespace collision with a CCR1 definition. The general SH code always expects CCR anyways, so there's no point in keeping the CCR1 naming around. Fixes up synclink collisions: drivers/char/pcmcia/synclink_cs.c:283:1: warning: "CCR1" redefined In file included from include/asm/cache.h:13, from include/asm/processor_32.h:15, from include/asm/processor.h:60, from include/linux/prefetch.h:14, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/char/pcmcia/synclink_cs.c:38: include/asm/cpu/cache.h:21:1: warning: this is the location of the previous definition Reported-by: Andrew Morton Signed-off-by: Paul Mundt --- include/asm-sh/cpu-sh2/cache.h | 3 +-- include/asm-sh/cpu-sh2a/cache.h | 6 +----- 2 files changed, 2 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/asm-sh/cpu-sh2/cache.h b/include/asm-sh/cpu-sh2/cache.h index 66388ce16c3..4e0b1650068 100644 --- a/include/asm-sh/cpu-sh2/cache.h +++ b/include/asm-sh/cpu-sh2/cache.h @@ -18,8 +18,7 @@ #define SH_CACHE_ASSOC 8 #if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define CCR1 0xffffffec -#define CCR CCR1 +#define CCR 0xffffffec #define CCR_CACHE_CE 0x01 /* Cache enable */ #define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ diff --git a/include/asm-sh/cpu-sh2a/cache.h b/include/asm-sh/cpu-sh2a/cache.h index d88774169b5..afe228b3f49 100644 --- a/include/asm-sh/cpu-sh2a/cache.h +++ b/include/asm-sh/cpu-sh2a/cache.h @@ -17,12 +17,9 @@ #define SH_CACHE_COMBINED 4 #define SH_CACHE_ASSOC 8 -#define CCR1 0xfffc1000 +#define CCR 0xfffc1000 /* CCR1 */ #define CCR2 0xfffc1004 -/* CCR1 behaves more like the traditional CCR */ -#define CCR CCR1 - /* * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not * listed here are reserved. @@ -41,4 +38,3 @@ #define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) #endif /* __ASM_CPU_SH2A_CACHE_H */ - -- cgit v1.2.3-70-g09d2 From c019fd8839503a91c556ae68d773e3bbb9b476e1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 28 Nov 2007 19:14:23 +0900 Subject: rtc: rtc-sh: Split out the CPU defs to asm/cpu/. With all of the different CPU types this was getting a but unwieldly. Since sh64 is now integrated, we don't have to worry about multiple architectures caring about the header definitions. Split out the defs for each asm/cpu/ to make rtc-sh slightly less visually offensive. Signed-off-by: Paul Mundt --- drivers/rtc/rtc-sh.c | 20 +------------------- include/asm-sh/cpu-sh2/rtc.h | 8 ++++++++ include/asm-sh/cpu-sh2a/rtc.h | 8 ++++++++ include/asm-sh/cpu-sh3/rtc.h | 8 ++++++++ include/asm-sh/cpu-sh4/rtc.h | 8 ++++++++ include/asm-sh/cpu-sh5/rtc.h | 8 ++++++++ include/asm-sh/rtc.h | 2 ++ 7 files changed, 43 insertions(+), 19 deletions(-) create mode 100644 include/asm-sh/cpu-sh2/rtc.h create mode 100644 include/asm-sh/cpu-sh2a/rtc.h create mode 100644 include/asm-sh/cpu-sh3/rtc.h create mode 100644 include/asm-sh/cpu-sh4/rtc.h create mode 100644 include/asm-sh/cpu-sh5/rtc.h (limited to 'include') diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index af9bc57c892..c1d6a1880cc 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -26,25 +26,7 @@ #include #define DRV_NAME "sh-rtc" -#define DRV_VERSION "0.1.5" - -#ifdef CONFIG_CPU_SH2A -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR -#elif defined(CONFIG_CPU_SH3) -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ -#define RTC_DEF_CAPABILITIES 0UL -#elif defined(CONFIG_CPU_SH4) -#define rtc_reg_size sizeof(u32) -#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR -#elif defined(CONFIG_CPU_SH5) -#define rtc_reg_size sizeof(u32) -#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR -#endif +#define DRV_VERSION "0.1.6" #define RTC_REG(r) ((r) * rtc_reg_size) diff --git a/include/asm-sh/cpu-sh2/rtc.h b/include/asm-sh/cpu-sh2/rtc.h new file mode 100644 index 00000000000..39e2d6e9478 --- /dev/null +++ b/include/asm-sh/cpu-sh2/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2_RTC_H +#define __ASM_SH_CPU_SH2_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH2_RTC_H */ diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/include/asm-sh/cpu-sh2a/rtc.h new file mode 100644 index 00000000000..afb511e2bed --- /dev/null +++ b/include/asm-sh/cpu-sh2a/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2A_RTC_H +#define __ASM_SH_CPU_SH2A_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH2A_RTC_H */ diff --git a/include/asm-sh/cpu-sh3/rtc.h b/include/asm-sh/cpu-sh3/rtc.h new file mode 100644 index 00000000000..319404aaee3 --- /dev/null +++ b/include/asm-sh/cpu-sh3/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH3_RTC_H +#define __ASM_SH_CPU_SH3_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/include/asm-sh/cpu-sh4/rtc.h b/include/asm-sh/cpu-sh4/rtc.h new file mode 100644 index 00000000000..f3d0f53275e --- /dev/null +++ b/include/asm-sh/cpu-sh4/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH4_RTC_H +#define __ASM_SH_CPU_SH4_RTC_H + +#define rtc_reg_size sizeof(u32) +#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH4_RTC_H */ diff --git a/include/asm-sh/cpu-sh5/rtc.h b/include/asm-sh/cpu-sh5/rtc.h new file mode 100644 index 00000000000..12ea0ed144e --- /dev/null +++ b/include/asm-sh/cpu-sh5/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH5_RTC_H +#define __ASM_SH_CPU_SH5_RTC_H + +#define rtc_reg_size sizeof(u32) +#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/include/asm-sh/rtc.h b/include/asm-sh/rtc.h index 858da99d37e..ec45ba8e11d 100644 --- a/include/asm-sh/rtc.h +++ b/include/asm-sh/rtc.h @@ -11,4 +11,6 @@ struct sh_rtc_platform_info { unsigned long capabilities; }; +#include + #endif /* _ASM_RTC_H */ -- cgit v1.2.3-70-g09d2 From a23ba43573a24c351640bc19c06c701798fe6e25 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 28 Nov 2007 20:19:38 +0900 Subject: sh: comment tidying for sh64->sh migration. Signed-off-by: Paul Mundt --- arch/sh/boards/cayman/led.c | 2 +- arch/sh/boot/compressed/Makefile_64 | 10 +++++----- arch/sh/boot/compressed/misc_64.c | 2 +- arch/sh/kernel/cpu/irq/intc-sh5.c | 10 +++++----- arch/sh/kernel/cpu/sh5/entry.S | 13 ++++++------- arch/sh/kernel/cpu/sh5/fpu.c | 10 ++++------ arch/sh/kernel/cpu/sh5/switchto.S | 2 +- arch/sh/kernel/cpu/sh5/unwind.c | 2 +- arch/sh/kernel/head_64.S | 19 ++++--------------- arch/sh/kernel/process_64.c | 29 ++++++++++++++++------------- arch/sh/kernel/sh_ksyms_64.c | 9 ++++----- arch/sh/kernel/signal_64.c | 11 ++++------- arch/sh/kernel/syscalls_64.S | 2 +- arch/sh/kernel/time_64.c | 10 +++++----- arch/sh/kernel/traps_64.c | 14 ++++---------- arch/sh/lib64/c-checksum.c | 5 +---- arch/sh/lib64/dbg.c | 2 +- arch/sh/lib64/udelay.c | 2 +- arch/sh/mm/cache-sh5.c | 15 ++++++--------- arch/sh/mm/extable_64.c | 28 +++++++++++++++------------- arch/sh/mm/tlb-sh5.c | 4 +--- include/asm-sh/checksum_64.h | 16 +++++++--------- include/asm-sh/cpu-sh5/cache.h | 15 +++++++-------- include/asm-sh/cpu-sh5/cacheflush.h | 6 +++--- include/asm-sh/cpu-sh5/irq.h | 15 +++++++-------- include/asm-sh/cpu-sh5/registers.h | 16 ++++++++-------- include/asm-sh/pgtable_64.h | 19 +++++++++---------- include/asm-sh/string_64.h | 18 +++++++----------- include/asm-sh/uaccess_64.h | 16 +++++++--------- include/asm-sh/unistd_64.h | 18 ++++++++---------- 30 files changed, 150 insertions(+), 190 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/cayman/led.c index b4e122fd950..a808eac4ecd 100644 --- a/arch/sh/boards/cayman/led.c +++ b/arch/sh/boards/cayman/led.c @@ -1,5 +1,5 @@ /* - * arch/sh64/mach-cayman/led.c + * arch/sh/boards/cayman/led.c * * Copyright (C) 2002 Stuart Menefy * diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 0b48ae99922..4334f2b86d8 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -1,14 +1,14 @@ # -# linux/arch/sh64/boot/compressed/Makefile +# arch/sh/boot/compressed/Makefile_64 # -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. +# create a compressed vmlinux image from the original vmlinux # # Copyright (C) 2002 Stuart Menefy # Copyright (C) 2004 Paul Mundt # -# create a compressed vmlinux image from the original vmlinux +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. # targets := vmlinux vmlinux.bin vmlinux.bin.gz \ diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c index aea00c53ce2..a006ef89b9d 100644 --- a/arch/sh/boot/compressed/misc_64.c +++ b/arch/sh/boot/compressed/misc_64.c @@ -1,5 +1,5 @@ /* - * arch/sh64/boot/compressed/misc.c + * arch/sh/boot/compressed/misc_64.c * * This is a collection of several routines from gzip-1.0.3 * adapted for Linux. diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 49b845a31ff..43ee7a9a4f0 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -1,18 +1,18 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * arch/sh/kernel/cpu/irq/intc-sh5.c * - * arch/sh64/kernel/irq_intc.c + * Interrupt Controller support for SH5 INTC. * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 Paul Mundt * - * Interrupt Controller support for SH5 INTC. * Per-interrupt selective. IRLM=0 (Fixed priority) is not * supported being useless without a cascaded interrupt * controller. * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index dbf2d768450..ba8750176d9 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -1,14 +1,13 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/entry.S + * arch/sh/kernel/cpu/sh5/entry.S * * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004, 2005 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow + * Copyright (C) 2004 - 2007 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c index 5a391b1a00e..30b76a94abf 100644 --- a/arch/sh/kernel/cpu/sh5/fpu.c +++ b/arch/sh/kernel/cpu/sh5/fpu.c @@ -1,9 +1,5 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/fpu.c + * arch/sh/kernel/cpu/sh5/fpu.c * * Copyright (C) 2001 Manuela Cirronis, Paolo Alberelli * Copyright (C) 2002 STMicroelectronics Limited @@ -12,8 +8,10 @@ * Started from SH4 version: * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include #include #include diff --git a/arch/sh/kernel/cpu/sh5/switchto.S b/arch/sh/kernel/cpu/sh5/switchto.S index 45b2d90eed7..45c351b0f1b 100644 --- a/arch/sh/kernel/cpu/sh5/switchto.S +++ b/arch/sh/kernel/cpu/sh5/switchto.S @@ -1,5 +1,5 @@ /* - * arch/sh64/kernel/switchto.S + * arch/sh/kernel/cpu/sh5/switchto.S * * sh64 context switch * diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c index 1214c78e358..119c20afd4e 100644 --- a/arch/sh/kernel/cpu/sh5/unwind.c +++ b/arch/sh/kernel/cpu/sh5/unwind.c @@ -1,5 +1,5 @@ /* - * arch/sh64/kernel/unwind.c + * arch/sh/kernel/cpu/sh5/unwind.c * * Copyright (C) 2004 Paul Mundt * Copyright (C) 2004 Richard Curnow diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index d3479287b10..f42d4c0feb7 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -1,23 +1,12 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/head.S + * arch/sh/kernel/head_64.S * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003, 2004 Paul Mundt * - * - * benedict.gaster@superh.com: 2nd May 2002 - * Moved definition of empty_zero_page to its own section allowing - * it to be placed at an absolute address known at load time. - * - * lethal@linux-sh.org: 9th May 2003 - * Kill off GLOBAL_NAME() usage. - * - * lethal@linux-sh.org: 8th May 2004 - * Add early SCIF console DTLB mapping. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 973dd1a3d29..cff3b7dc9c5 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -421,19 +421,22 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) */ void exit_thread(void) { - /* See arch/sparc/kernel/process.c for the precedent for doing this -- RPC. - - The SH-5 FPU save/restore approach relies on last_task_used_math - pointing to a live task_struct. When another task tries to use the - FPU for the 1st time, the FPUDIS trap handling (see - arch/sh64/kernel/fpu.c) will save the existing FPU state to the - FP regs field within last_task_used_math before re-loading the new - task's FPU state (or initialising it if the FPU has been used - before). So if last_task_used_math is stale, and its page has already been - re-allocated for another use, the consequences are rather grim. Unless we - null it here, there is no other path through which it would get safely - nulled. */ - + /* + * See arch/sparc/kernel/process.c for the precedent for doing + * this -- RPC. + * + * The SH-5 FPU save/restore approach relies on + * last_task_used_math pointing to a live task_struct. When + * another task tries to use the FPU for the 1st time, the FPUDIS + * trap handling (see arch/sh/kernel/cpu/sh5/fpu.c) will save the + * existing FPU state to the FP regs field within + * last_task_used_math before re-loading the new task's FPU state + * (or initialising it if the FPU has been used before). So if + * last_task_used_math is stale, and its page has already been + * re-allocated for another use, the consequences are rather + * grim. Unless we null it here, there is no other path through + * which it would get safely nulled. + */ #ifdef CONFIG_SH_FPU if (last_task_used_math == current) { last_task_used_math = NULL; diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index fbc991c33f5..8004c38d3d3 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -1,12 +1,11 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/sh_ksyms.c + * arch/sh/kernel/sh_ksyms_64.c * * Copyright (C) 2000, 2001 Paolo Alberelli * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 922891960c3..80bde19d445 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -1,16 +1,13 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/signal.c + * arch/sh/kernel/signal_64.c * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 Paul Mundt * Copyright (C) 2004 Richard Curnow * - * Started from sh version. - * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index abb94c05d07..98a93efe369 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -1,5 +1,5 @@ /* - * arch/sh64/kernel/syscalls.S + * arch/sh/kernel/syscalls_64.S * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2004 - 2007 Paul Mundt diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 81003af8115..f819ba38a6c 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -1,9 +1,5 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/time.c + * arch/sh/kernel/time_64.c * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 - 2007 Paul Mundt @@ -13,6 +9,10 @@ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka * Some code taken from i386 version. * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index b8020f26b63..c0b3c6f6edb 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -1,19 +1,13 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/kernel/traps.c + * arch/sh/kernel/traps_64.c * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003, 2004 Paul Mundt * Copyright (C) 2003, 2004 Richard Curnow * - */ - -/* - * 'Traps.c' handles hardware traps and faults after we have saved some - * state in 'entry.S'. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include diff --git a/arch/sh/lib64/c-checksum.c b/arch/sh/lib64/c-checksum.c index 053137abd8a..5dfbd8b5e55 100644 --- a/arch/sh/lib64/c-checksum.c +++ b/arch/sh/lib64/c-checksum.c @@ -1,12 +1,9 @@ /* - * arch/sh64/lib/c-checksum.c + * arch/sh/lib64/c-checksum.c * * This file contains network checksum routines that are better done * in an architecture-specific manner due to speed.. */ - -#undef DEBUG - #include #include #include diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c index 97816e0baf1..75825ef6e08 100644 --- a/arch/sh/lib64/dbg.c +++ b/arch/sh/lib64/dbg.c @@ -2,7 +2,7 @@ -- -- Identity : Linux50 Debug Funcions -- --- File : arch/sh64/lib/dbg.C +-- File : arch/sh/lib64/dbg.c -- -- Copyright 2000, 2001 STMicroelectronics Limited. -- Copyright 2004 Richard Curnow (evt_debug etc) diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c index 4c71a7428e6..23c7d17fb9f 100644 --- a/arch/sh/lib64/udelay.c +++ b/arch/sh/lib64/udelay.c @@ -1,5 +1,5 @@ /* - * arch/sh64/lib/udelay.c + * arch/sh/lib64/udelay.c * * Delay routines, using a pre-computed "loops_per_jiffy" value. * diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c index 421487cfff4..4617e3aeee7 100644 --- a/arch/sh/mm/cache-sh5.c +++ b/arch/sh/mm/cache-sh5.c @@ -1,18 +1,15 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/mm/cache.c + * arch/sh/mm/cache-sh5.c * * Original version Copyright (C) 2000, 2001 Paolo Alberelli * Second version Copyright (C) benedict.gaster@superh.com 2002 * Third version Copyright Richard.Curnow@superh.com 2003 * Hacks to third version Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - -/****************************************************************************/ - #include #include #include @@ -146,7 +143,7 @@ int __init sh64_cache_init(void) /* The following group of functions deal with mapping and unmapping a temporary page into the DTLB slot that have been set aside for our exclusive use. */ /* In order to accomplish this, we use the generic interface for adding and - removing a wired slot entry as defined in arch/sh64/mm/tlb.c */ + removing a wired slot entry as defined in arch/sh/mm/tlb-sh5.c */ /****************************************************************************/ static unsigned long slot_own_flags; diff --git a/arch/sh/mm/extable_64.c b/arch/sh/mm/extable_64.c index a2e6e056377..f05499688d8 100644 --- a/arch/sh/mm/extable_64.c +++ b/arch/sh/mm/extable_64.c @@ -1,14 +1,14 @@ /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * arch/sh64/mm/extable.c + * arch/sh/mm/extable_64.c * * Copyright (C) 2003 Richard Curnow * Copyright (C) 2003, 2004 Paul Mundt * * Cloned from the 2.5 SH version.. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include #include @@ -21,13 +21,16 @@ static const struct exception_table_entry __copy_user_fixup_ex = { .fixup = (unsigned long)&__copy_user_fixup, }; -/* Some functions that may trap due to a bad user-mode address have too many loads - and stores in them to make it at all practical to label each one and put them all in - the main exception table. - - In particular, the fast memcpy routine is like this. It's fix-up is just to fall back - to a slow byte-at-a-time copy, which is handled the conventional way. So it's functionally - OK to just handle any trap occurring in the fast memcpy with that fixup. */ +/* + * Some functions that may trap due to a bad user-mode address have too + * many loads and stores in them to make it at all practical to label + * each one and put them all in the main exception table. + * + * In particular, the fast memcpy routine is like this. It's fix-up is + * just to fall back to a slow byte-at-a-time copy, which is handled the + * conventional way. So it's functionally OK to just handle any trap + * occurring in the fast memcpy with that fixup. + */ static const struct exception_table_entry *check_exception_ranges(unsigned long addr) { if ((addr >= (unsigned long)©_user_memcpy) && @@ -77,4 +80,3 @@ int fixup_exception(struct pt_regs *regs) return 0; } - diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c index d517e7d7034..f34274a1ded 100644 --- a/arch/sh/mm/tlb-sh5.c +++ b/arch/sh/mm/tlb-sh5.c @@ -1,5 +1,5 @@ /* - * arch/sh64/mm/tlb.c + * arch/sh/mm/tlb-sh5.c * * Copyright (C) 2003 Paul Mundt * Copyright (C) 2003 Richard Curnow @@ -7,7 +7,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ #include #include @@ -163,4 +162,3 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr, */ inline void sh64_teardown_tlb_slot(unsigned long long config_addr) __attribute__ ((alias("__flush_tlb_slot"))); - diff --git a/include/asm-sh/checksum_64.h b/include/asm-sh/checksum_64.h index ec79b92e6bd..9c62a031a8f 100644 --- a/include/asm-sh/checksum_64.h +++ b/include/asm-sh/checksum_64.h @@ -1,15 +1,14 @@ -#ifndef __ASM_SH64_CHECKSUM_H -#define __ASM_SH64_CHECKSUM_H +#ifndef __ASM_SH_CHECKSUM_64_H +#define __ASM_SH_CHECKSUM_64_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/checksum.h + * include/asm-sh/checksum_64.h * * Copyright (C) 2000, 2001 Paolo Alberelli * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ /* @@ -76,5 +75,4 @@ static inline __sum16 ip_compute_csum(const void *buff, int len) return csum_fold(csum_partial(buff, len, 0)); } -#endif /* __ASM_SH64_CHECKSUM_H */ - +#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/include/asm-sh/cpu-sh5/cache.h b/include/asm-sh/cpu-sh5/cache.h index 7eaa8894649..ed050ab526f 100644 --- a/include/asm-sh/cpu-sh5/cache.h +++ b/include/asm-sh/cpu-sh5/cache.h @@ -1,16 +1,15 @@ -#ifndef __ASM_SH64_CACHE_H -#define __ASM_SH64_CACHE_H +#ifndef __ASM_SH_CPU_SH5_CACHE_H +#define __ASM_SH_CPU_SH5_CACHE_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/cache.h + * include/asm-sh/cpu-sh5/cache.h * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003, 2004 Paul Mundt * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #define L1_CACHE_SHIFT 5 @@ -95,4 +94,4 @@ * No Instruction Cache defines required, then. */ -#endif /* __ASM_SH64_CACHE_H */ +#endif /* __ASM_SH_CPU_SH5_CACHE_H */ diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/include/asm-sh/cpu-sh5/cacheflush.h index 45d12d6f89c..98edb5b1da3 100644 --- a/include/asm-sh/cpu-sh5/cacheflush.h +++ b/include/asm-sh/cpu-sh5/cacheflush.h @@ -1,5 +1,5 @@ -#ifndef __ASM_SH64_CACHEFLUSH_H -#define __ASM_SH64_CACHEFLUSH_H +#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H +#define __ASM_SH_CPU_SH5_CACHEFLUSH_H #ifndef __ASSEMBLY__ @@ -31,5 +31,5 @@ extern void flush_icache_user_range(struct vm_area_struct *vma, #endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH64_CACHEFLUSH_H */ +#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */ diff --git a/include/asm-sh/cpu-sh5/irq.h b/include/asm-sh/cpu-sh5/irq.h index f539baec852..f0f0756e6e8 100644 --- a/include/asm-sh/cpu-sh5/irq.h +++ b/include/asm-sh/cpu-sh5/irq.h @@ -1,15 +1,14 @@ -#ifndef __ASM_SH64_IRQ_H -#define __ASM_SH64_IRQ_H +#ifndef __ASM_SH_CPU_SH5_IRQ_H +#define __ASM_SH_CPU_SH5_IRQ_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/irq.h + * include/asm-sh/cpu-sh5/irq.h * * Copyright (C) 2000, 2001 Paolo Alberelli * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ @@ -115,4 +114,4 @@ extern int intc_evt_to_irq[(0xE20/0x20)+1]; int intc_irq_describe(char* p, int irq); extern int platform_int_priority[NR_INTC_IRQS]; -#endif /* __ASM_SH64_IRQ_H */ +#endif /* __ASM_SH_CPU_SH5_IRQ_H */ diff --git a/include/asm-sh/cpu-sh5/registers.h b/include/asm-sh/cpu-sh5/registers.h index 7eec666acf8..6664ea6f156 100644 --- a/include/asm-sh/cpu-sh5/registers.h +++ b/include/asm-sh/cpu-sh5/registers.h @@ -1,15 +1,15 @@ -#ifndef __ASM_SH64_REGISTERS_H -#define __ASM_SH64_REGISTERS_H +#ifndef __ASM_SH_CPU_SH5_REGISTERS_H +#define __ASM_SH_CPU_SH5_REGISTERS_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/registers.h + * include/asm-sh/cpu-sh5/registers.h * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #ifdef __ASSEMBLY__ @@ -103,4 +103,4 @@ #define __USR __str(USR) #endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH64_REGISTERS_H */ +#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/include/asm-sh/pgtable_64.h b/include/asm-sh/pgtable_64.h index d422111006f..972211671c9 100644 --- a/include/asm-sh/pgtable_64.h +++ b/include/asm-sh/pgtable_64.h @@ -1,21 +1,20 @@ -#ifndef __ASM_SH64_PGTABLE_H -#define __ASM_SH64_PGTABLE_H +#ifndef __ASM_SH_PGTABLE_64_H +#define __ASM_SH_PGTABLE_64_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * include/asm-sh/pgtable_64.h * - * include/asm-sh64/pgtable.h + * This file contains the functions and defines necessary to modify and use + * the SuperH page table tree. * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003, 2004 Paul Mundt * Copyright (C) 2003, 2004 Richard Curnow * - * This file contains the functions and defines necessary to modify and use - * the SuperH page table tree. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include #include #include @@ -297,4 +296,4 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#endif /* __ASM_SH64_PGTABLE_H */ +#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/include/asm-sh/string_64.h b/include/asm-sh/string_64.h index 8a7357366ce..aa1fef229c7 100644 --- a/include/asm-sh/string_64.h +++ b/include/asm-sh/string_64.h @@ -1,21 +1,17 @@ -#ifndef __ASM_SH64_STRING_H -#define __ASM_SH64_STRING_H +#ifndef __ASM_SH_STRING_64_H +#define __ASM_SH_STRING_64_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/string.h + * include/asm-sh/string_64.h * * Copyright (C) 2000, 2001 Paolo Alberelli * - * Empty on purpose. ARCH SH64 ASM libs are out of the current project scope. - * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #define __HAVE_ARCH_MEMCPY - extern void *memcpy(void *dest, const void *src, size_t count); -#endif +#endif /* __ASM_SH_STRING_64_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index 24800a8045c..d54ec082d25 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -1,12 +1,8 @@ -#ifndef __ASM_SH64_UACCESS_H -#define __ASM_SH64_UACCESS_H +#ifndef __ASM_SH_UACCESS_64_H +#define __ASM_SH_UACCESS_64_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * include/asm-sh64/uaccess.h + * include/asm-sh/uaccess_64.h * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003, 2004 Paul Mundt @@ -20,8 +16,10 @@ * Copyright (C) 1996, 1997, 1998 by Ralf Baechle * and i386 version. * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include #include @@ -301,4 +299,4 @@ struct exception_table_entry extern unsigned long search_exception_table(unsigned long addr); extern const struct exception_table_entry *search_exception_tables (unsigned long addr); -#endif /* __ASM_SH64_UACCESS_H */ +#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h index 1a5197f369b..944511882ca 100644 --- a/include/asm-sh/unistd_64.h +++ b/include/asm-sh/unistd_64.h @@ -1,21 +1,19 @@ -#ifndef __ASM_SH64_UNISTD_H -#define __ASM_SH64_UNISTD_H +#ifndef __ASM_SH_UNISTD_64_H +#define __ASM_SH_UNISTD_64_H /* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * include/asm-sh/unistd_64.h * - * include/asm-sh64/unistd.h + * This file contains the system call numbers. * * Copyright (C) 2000, 2001 Paolo Alberelli * Copyright (C) 2003 - 2007 Paul Mundt * Copyright (C) 2004 Sean McGoogan * - * This file contains the system call numbers. - * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #define __NR_restart_syscall 0 #define __NR_exit 1 #define __NR_fork 2 @@ -414,4 +412,4 @@ #endif #endif /* __KERNEL__ */ -#endif /* __ASM_SH64_UNISTD_H */ +#endif /* __ASM_SH_UNISTD_64_H */ -- cgit v1.2.3-70-g09d2 From 1efe4ce3ca126da77e450d5a83f7201949d76f62 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 30 Nov 2007 16:12:36 +0900 Subject: sh: GUSA atomic rollback support. This implements kernel-level atomic rollback built on top of gUSA, as an alternative non-IRQ based atomicity method. This is generally a faster method for platforms that are lacking the LL/SC pairs that SH-4A and later use, and is only supportable on legacy cores. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 12 ++- arch/sh/kernel/cpu/sh3/entry.S | 24 +++++- arch/sh/kernel/entry-common.S | 19 ----- arch/sh/kernel/process_32.c | 19 ----- arch/sh/kernel/signal_32.c | 18 ----- include/asm-sh/atomic-grb.h | 169 +++++++++++++++++++++++++++++++++++++++++ include/asm-sh/atomic.h | 10 ++- include/asm-sh/bitops-grb.h | 169 +++++++++++++++++++++++++++++++++++++++++ include/asm-sh/bitops-irq.h | 91 ++++++++++++++++++++++ include/asm-sh/bitops.h | 91 ++-------------------- include/asm-sh/cmpxchg-grb.h | 70 +++++++++++++++++ include/asm-sh/cmpxchg-irq.h | 40 ++++++++++ include/asm-sh/system.h | 40 ++-------- 13 files changed, 591 insertions(+), 181 deletions(-) create mode 100644 include/asm-sh/atomic-grb.h create mode 100644 include/asm-sh/bitops-grb.h create mode 100644 include/asm-sh/bitops-irq.h create mode 100644 include/asm-sh/cmpxchg-grb.h create mode 100644 include/asm-sh/cmpxchg-irq.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 2dc3b177193..f645f8416f1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -692,7 +692,7 @@ source "kernel/Kconfig.preempt" config GUSA def_bool y - depends on !SMP + depends on !SMP && SUPERH32 help This enables support for gUSA (general UserSpace Atomicity). This is the default implementation for both UP and non-ll/sc @@ -704,6 +704,16 @@ config GUSA This should only be disabled for special cases where alternate atomicity implementations exist. +config GUSA_RB + bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)" + depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A) + help + Enabling this option will allow the kernel to implement some + atomic operations using a software implemention of load-locked/ + store-conditional (LLSC). On machines which do not have hardware + LLSC, this should be more efficient than the other alternative of + disabling insterrupts around the atomic sequence. + endmenu menu "Boot options" diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 0d12a124055..4004073f98c 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -13,8 +13,9 @@ #include #include #include -#include #include +#include +#include ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -409,6 +410,27 @@ ENTRY(handle_exception) ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), ! save all registers onto stack. ! + +#ifdef CONFIG_GUSA + ! Check for roll back gRB (User and Kernel) + mov r15, k0 + shll k0 + bf/s 1f + shll k0 + bf/s 1f + stc spc, k1 + stc r0_bank, k0 + cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0) + bt/s 2f + stc r1_bank, k1 + + add #-2, k0 + add r15, k0 + ldc k0, spc ! PC = saved r0 + r15 - 2 +2: mov k1, r15 ! SP = r1 +1: +#endif + stc ssr, k0 ! Is it from kernel space? shll k0 ! Check MD bit (bit30) by shifting it into... shll k0 ! ...the T bit diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 397ac71d97f..926b2e7b11c 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -176,25 +176,6 @@ work_notifysig: jmp @r1 lds r0, pr work_resched: -#if defined(CONFIG_GUSA) && !defined(CONFIG_PREEMPT) - ! gUSA handling - mov.l @(OFF_SP,r15), r0 ! get user space stack pointer - mov r0, r1 - shll r0 - bf/s 1f - shll r0 - bf/s 1f - mov #OFF_PC, r0 - ! SP >= 0xc0000000 : gUSA mark - mov.l @(r0,r15), r2 ! get user space PC (program counter) - mov.l @(OFF_R0,r15), r3 ! end point - cmp/hs r3, r2 ! r2 >= r3? - bt 1f - add r3, r1 ! rewind point #2 - mov.l r1, @(r0,r15) ! reset PC to rewind point #2 - ! -1: -#endif mov.l 1f, r1 jsr @r1 ! schedule nop diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index b48324867ee..9ab1926b9d1 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -322,25 +322,6 @@ struct task_struct *__switch_to(struct task_struct *prev, unlazy_fpu(prev, task_pt_regs(prev)); #endif -#if defined(CONFIG_GUSA) && defined(CONFIG_PREEMPT) - { - struct pt_regs *regs; - - preempt_disable(); - regs = task_pt_regs(prev); - if (user_mode(regs) && regs->regs[15] >= 0xc0000000) { - int offset = (int)regs->regs[15]; - - /* Reset stack pointer: clear critical region mark */ - regs->regs[15] = regs->regs[1]; - if (regs->pc < regs->regs[0]) - /* Go to rewind point */ - regs->pc = regs->regs[0] + offset; - } - preempt_enable_no_resched(); - } -#endif - #ifdef CONFIG_MMU /* * Restore the kernel mode register diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index ca754fd4243..f6b5fbfe75c 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -507,24 +507,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, ctrl_inw(regs->pc - 4)); break; } -#ifdef CONFIG_GUSA - } else { - /* gUSA handling */ - preempt_disable(); - - if (regs->regs[15] >= 0xc0000000) { - int offset = (int)regs->regs[15]; - - /* Reset stack pointer: clear critical region mark */ - regs->regs[15] = regs->regs[1]; - if (regs->pc < regs->regs[0]) - /* Go to rewind point #1 */ - regs->pc = regs->regs[0] + offset - - instruction_size(ctrl_inw(regs->pc-4)); - } - - preempt_enable_no_resched(); -#endif } /* Set up the stack frame */ diff --git a/include/asm-sh/atomic-grb.h b/include/asm-sh/atomic-grb.h new file mode 100644 index 00000000000..4c5b7dbfced --- /dev/null +++ b/include/asm-sh/atomic-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_ATOMIC_GRB_H +#define __ASM_SH_ATOMIC_GRB_H + +static inline void atomic_add(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); + + return tmp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory", "r0", "r1"); + + return tmp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + unsigned int _mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (_mask) + : "memory" , "r0", "r1"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-8, r15 \n\t" + " mov.l @%1, %0 \n\t" + " cmp/eq %2, %0 \n\t" + " bf 1f \n\t" + " mov.l %3, @%1 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret) + : "r" (v), "r" (old), "r" (new) + : "memory" , "r0", "r1" , "t"); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-12, r15 \n\t" + " mov.l @%2, %1 \n\t" + " mov %1, %0 \n\t" + " cmp/eq %4, %0 \n\t" + " bt/s 1f \n\t" + " add %3, %1 \n\t" + " mov.l %1, @%2 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret), "=&r" (tmp) + : "r" (v), "r" (a), "r" (u) + : "memory" , "r0", "r1" , "t"); + + return ret != u; +} +#endif /* __ASM_SH_ATOMIC_GRB_H */ diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h index e12570b9339..c043ef00302 100644 --- a/include/asm-sh/atomic.h +++ b/include/asm-sh/atomic.h @@ -17,7 +17,9 @@ typedef struct { volatile int counter; } atomic_t; #include #include -#ifdef CONFIG_CPU_SH4A +#if defined(CONFIG_GUSA_RB) +#include +#elif defined(CONFIG_CPU_SH4A) #include #else #include @@ -44,6 +46,7 @@ typedef struct { volatile int counter; } atomic_t; #define atomic_inc(v) atomic_add(1,(v)) #define atomic_dec(v) atomic_sub(1,(v)) +#ifndef CONFIG_GUSA_RB static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { int ret; @@ -58,8 +61,6 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new) return ret; } -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - static inline int atomic_add_unless(atomic_t *v, int a, int u) { int ret; @@ -73,6 +74,9 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) return ret != u; } +#endif + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) /* Atomic operations are already serializing on SH */ diff --git a/include/asm-sh/bitops-grb.h b/include/asm-sh/bitops-grb.h new file mode 100644 index 00000000000..a5907b94395 --- /dev/null +++ b/include/asm-sh/bitops-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_BITOPS_GRB_H +#define __ASM_SH_BITOPS_GRB_H + +static inline void set_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void clear_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = ~(1 << (nr & 0x1f)); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* and */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " xor %2, %0 \n\t" /* xor */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " or %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1" ,"t"); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval,not_mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + not_mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " and %4, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask), + "r" (not_mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " xor %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} +#endif /* __ASM_SH_BITOPS_GRB_H */ diff --git a/include/asm-sh/bitops-irq.h b/include/asm-sh/bitops-irq.h new file mode 100644 index 00000000000..653a1275058 --- /dev/null +++ b/include/asm-sh/bitops-irq.h @@ -0,0 +1,91 @@ +#ifndef __ASM_SH_BITOPS_IRQ_H +#define __ASM_SH_BITOPS_IRQ_H + +static inline void set_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static inline void clear_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static inline void change_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a ^= mask; + local_irq_restore(flags); +} + +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + + return retval; +} + +#endif /* __ASM_SH_BITOPS_IRQ_H */ diff --git a/include/asm-sh/bitops.h b/include/asm-sh/bitops.h index a7bd81a7f06..b6ba5a60dec 100644 --- a/include/asm-sh/bitops.h +++ b/include/asm-sh/bitops.h @@ -11,97 +11,18 @@ /* For __swab32 */ #include -static inline void set_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a |= mask; - local_irq_restore(flags); -} +#ifdef CONFIG_GUSA_RB +#include +#else +#include +#endif + /* * clear_bit() doesn't provide any barrier for the compiler. */ #define smp_mb__before_clear_bit() barrier() #define smp_mb__after_clear_bit() barrier() -static inline void clear_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a &= ~mask; - local_irq_restore(flags); -} - -static inline void change_bit(int nr, volatile void * addr) -{ - int mask; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - *a ^= mask; - local_irq_restore(flags); -} - -static inline int test_and_set_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a |= mask; - local_irq_restore(flags); - - return retval; -} - -static inline int test_and_clear_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a &= ~mask; - local_irq_restore(flags); - - return retval; -} - -static inline int test_and_change_bit(int nr, volatile void * addr) -{ - int mask, retval; - volatile unsigned int *a = addr; - unsigned long flags; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - local_irq_save(flags); - retval = (mask & *a) != 0; - *a ^= mask; - local_irq_restore(flags); - - return retval; -} #include diff --git a/include/asm-sh/cmpxchg-grb.h b/include/asm-sh/cmpxchg-grb.h new file mode 100644 index 00000000000..e2681abe764 --- /dev/null +++ b/include/asm-sh/cmpxchg-grb.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_CMPXCHG_GRB_H +#define __ASM_SH_CMPXCHG_GRB_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-4, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory", "r0", "r1"); + + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN */ + " mov.b @%1, %0 \n\t" /* load old value */ + " extu.b %0, %0 \n\t" /* extend as unsigned */ + " mov.b %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory" , "r0", "r1"); + + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-8, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " cmp/eq %0, %2 \n\t" + " bf 1f \n\t" /* if not equal */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (new) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_GRB_H */ diff --git a/include/asm-sh/cmpxchg-irq.h b/include/asm-sh/cmpxchg-irq.h new file mode 100644 index 00000000000..43049ec0554 --- /dev/null +++ b/include/asm-sh/cmpxchg-irq.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_CMPXCHG_IRQ_H +#define __ASM_SH_CMPXCHG_IRQ_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val & 0xff; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + __u32 retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); /* implies memory barrier */ + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_IRQ_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index ad3d2a63613..969f3d4afe2 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -68,27 +68,11 @@ #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) -static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val; - local_irq_restore(flags); - return retval; -} - -static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) -{ - unsigned long flags, retval; - - local_irq_save(flags); - retval = *m; - *m = val & 0xff; - local_irq_restore(flags); - return retval; -} +#ifdef CONFIG_GUSA_RB +#include +#else +#include +#endif extern void __xchg_called_with_bad_pointer(void); @@ -115,20 +99,6 @@ extern void __xchg_called_with_bad_pointer(void); #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) -static inline unsigned long __cmpxchg_u32(volatile int * m, unsigned long old, - unsigned long new) -{ - __u32 retval; - unsigned long flags; - - local_irq_save(flags); - retval = *m; - if (retval == old) - *m = new; - local_irq_restore(flags); /* implies memory barrier */ - return retval; -} - /* This function doesn't exist, so you'll get a linker error * if something tries to do an invalid cmpxchg(). */ extern void __cmpxchg_called_with_bad_pointer(void); -- cgit v1.2.3-70-g09d2 From cbaa118ecfd99fc5ed7adbd9c34a30e1c05e3c93 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 30 Nov 2007 17:06:36 +0900 Subject: sh: Preparation for uncached jumps through PMB. Presently most of the 29-bit physical parts do P1/P2 segmentation with a 1:1 cached/uncached mapping, jumping between the two to control the caching behaviour. This provides the basic infrastructure to maintain this behaviour on 32-bit physical parts that don't map P1/P2 at all, using a shiny new linker section and corresponding fixmap entry. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/init.c | 6 +++--- arch/sh/kernel/cpu/sh3/probe.c | 6 +++--- arch/sh/kernel/vmlinux_32.lds.S | 9 +++++++++ arch/sh/mm/cache-debugfs.c | 9 +++++---- arch/sh/mm/cache-sh4.c | 14 +++++++------- arch/sh/mm/cache-sh7705.c | 12 ++++++------ arch/sh/mm/init.c | 16 +++++++++++++++- arch/sh/mm/pmb.c | 18 +++++++++--------- arch/sh/mm/tlb-sh4.c | 7 ++++--- include/asm-sh/fixmap.h | 1 + include/asm-sh/sections.h | 1 + include/asm-sh/system.h | 2 ++ include/asm-sh/system_32.h | 36 +++++++++++++++++++----------------- include/asm-sh/system_64.h | 7 ++++--- 14 files changed, 88 insertions(+), 56 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index fd1688e6c61..0f0c76a842e 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -64,11 +64,11 @@ static void __init speculative_execution_init(void) * Generic first-level cache init */ #ifdef CONFIG_SUPERH32 -static void __init cache_init(void) +static void __uses_jump_to_uncached cache_init(void) { unsigned long ccr, flags; - jump_to_P2(); + jump_to_uncached(); ccr = ctrl_inl(CCR); /* @@ -145,7 +145,7 @@ static void __init cache_init(void) #endif ctrl_outl(flags, CCR); - back_to_P1(); + back_to_cached(); } #else #define cache_init() do { } while (0) diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index bf579e061e0..22070e43e34 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -16,11 +16,11 @@ #include #include -int __init detect_cpu_and_cache_system(void) +int __uses_jump_to_uncached detect_cpu_and_cache_system(void) { unsigned long addr0, addr1, data0, data1, data2, data3; - jump_to_P2(); + jump_to_uncached(); /* * Check if the entry shadows or not. * When shadowed, it's 128-entry system. @@ -48,7 +48,7 @@ int __init detect_cpu_and_cache_system(void) ctrl_outl(data0&~SH_CACHE_VALID, addr0); ctrl_outl(data2&~SH_CACHE_VALID, addr1); - back_to_P1(); + back_to_cached(); boot_cpu_data.dcache.ways = 4; boot_cpu_data.dcache.entry_shift = 4; diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index 0956fb3681a..50c69c18dce 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -43,6 +43,15 @@ SECTIONS NOTES RO_DATA(PAGE_SIZE) + /* + * Code which must be executed uncached and the associated data + */ + . = ALIGN(PAGE_SIZE); + __uncached_start = .; + .uncached.text : { *(.uncached.text) } + .uncached.data : { *(.uncached.data) } + __uncached_end = .; + . = ALIGN(THREAD_SIZE); .data : { /* Data */ *(.data.init_task) diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index de6d2c9aa47..db6d950b6f5 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -22,7 +22,8 @@ enum cache_type { CACHE_TYPE_UNIFIED, }; -static int cache_seq_show(struct seq_file *file, void *iter) +static int __uses_jump_to_uncached cache_seq_show(struct seq_file *file, + void *iter) { unsigned int cache_type = (unsigned int)file->private; struct cache_info *cache; @@ -34,11 +35,11 @@ static int cache_seq_show(struct seq_file *file, void *iter) * Go uncached immediately so we don't skew the results any * more than we already are.. */ - jump_to_P2(); + jump_to_uncached(); ccr = ctrl_inl(CCR); if ((ccr & CCR_CACHE_ENABLE) == 0) { - back_to_P1(); + back_to_cached(); seq_printf(file, "disabled\n"); return 0; @@ -104,7 +105,7 @@ static int cache_seq_show(struct seq_file *file, void *iter) addrstart += cache->way_incr; } - back_to_P1(); + back_to_cached(); return 0; } diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 226b190c5b9..43d7ff6b6ec 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -190,7 +190,7 @@ void flush_icache_range(unsigned long start, unsigned long end) * .. which happens to be the same behavior as flush_icache_range(). * So, we simply flush out a line. */ -void flush_cache_sigtramp(unsigned long addr) +void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr) { unsigned long v, index; unsigned long flags; @@ -205,13 +205,13 @@ void flush_cache_sigtramp(unsigned long addr) (v & boot_cpu_data.icache.entry_mask); local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); for (i = 0; i < boot_cpu_data.icache.ways; i++, index += boot_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ - back_to_P1(); + back_to_cached(); wmb(); local_irq_restore(flags); } @@ -256,12 +256,12 @@ void flush_dcache_page(struct page *page) } /* TODO: Selective icache invalidation through IC address array.. */ -static inline void flush_icache_all(void) +static inline void __uses_jump_to_uncached flush_icache_all(void) { unsigned long flags, ccr; local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); /* Flush I-cache */ ccr = ctrl_inl(CCR); @@ -269,11 +269,11 @@ static inline void flush_icache_all(void) ctrl_outl(ccr, CCR); /* - * back_to_P1() will take care of the barrier for us, don't add + * back_to_cached() will take care of the barrier for us, don't add * another one! */ - back_to_P1(); + back_to_cached(); local_irq_restore(flags); } diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 4896d737692..22dacc77882 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -71,7 +71,7 @@ void flush_icache_range(unsigned long start, unsigned long end) /* * Writeback&Invalidate the D-cache of the page */ -static void __flush_dcache_page(unsigned long phys) +static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys) { unsigned long ways, waysize, addrstart; unsigned long flags; @@ -92,7 +92,7 @@ static void __flush_dcache_page(unsigned long phys) * possible. */ local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); ways = current_cpu_data.dcache.ways; waysize = current_cpu_data.dcache.sets; @@ -118,7 +118,7 @@ static void __flush_dcache_page(unsigned long phys) addrstart += current_cpu_data.dcache.way_incr; } while (--ways); - back_to_P1(); + back_to_cached(); local_irq_restore(flags); } @@ -132,15 +132,15 @@ void flush_dcache_page(struct page *page) __flush_dcache_page(PHYSADDR(page_address(page))); } -void flush_cache_all(void) +void __uses_jump_to_uncached flush_cache_all(void) { unsigned long flags; local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); cache_wback_all(); - back_to_P1(); + back_to_cached(); local_irq_restore(flags); } diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 79c309780f9..094225e0d72 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -23,6 +23,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; +unsigned long cached_to_uncached = 0; void show_mem(void) { @@ -99,7 +100,8 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); - flush_tlb_one(get_asid(), addr); + if (cached_to_uncached) + flush_tlb_one(get_asid(), addr); } /* @@ -164,6 +166,18 @@ void __init paging_init(void) } free_area_init_nodes(max_zone_pfns); + + /* Set up the uncached fixmap */ + set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start)); + +#ifdef CONFIG_29BIT + /* + * Handle trivial transitions between cached and uncached + * segments, making use of the 1:1 mapping relationship in + * 512MB lowmem. + */ + cached_to_uncached = P2SEG - P1SEG; +#endif } static struct kcore_list kcore_mem, kcore_vmalloc; diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index ef6ab39eaf6..ab81c602295 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -163,18 +163,18 @@ repeat: return 0; } -int set_pmb_entry(struct pmb_entry *pmbe) +int __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe) { int ret; - jump_to_P2(); + jump_to_uncached(); ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry); - back_to_P1(); + back_to_cached(); return ret; } -void clear_pmb_entry(struct pmb_entry *pmbe) +void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe) { unsigned int entry = pmbe->entry; unsigned long addr; @@ -188,7 +188,7 @@ void clear_pmb_entry(struct pmb_entry *pmbe) entry >= NR_PMB_ENTRIES)) return; - jump_to_P2(); + jump_to_uncached(); /* Clear V-bit */ addr = mk_pmb_addr(entry); @@ -197,7 +197,7 @@ void clear_pmb_entry(struct pmb_entry *pmbe) addr = mk_pmb_data(entry); ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr); - back_to_P1(); + back_to_cached(); clear_bit(entry, &pmb_map); } @@ -302,7 +302,7 @@ static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb) pmbe->entry = PMB_NO_ENTRY; } -static int __init pmb_init(void) +static int __uses_jump_to_uncached pmb_init(void) { unsigned int nr_entries = ARRAY_SIZE(pmb_init_map); unsigned int entry, i; @@ -312,7 +312,7 @@ static int __init pmb_init(void) pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), 0, SLAB_PANIC, pmb_cache_ctor); - jump_to_P2(); + jump_to_uncached(); /* * Ordering is important, P2 must be mapped in the PMB before we @@ -335,7 +335,7 @@ static int __init pmb_init(void) i |= MMUCR_TI; ctrl_outl(i, MMUCR); - back_to_P1(); + back_to_cached(); return 0; } diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 2d1dd604430..f0c7b7397fa 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -79,7 +79,8 @@ void update_mmu_cache(struct vm_area_struct * vma, local_irq_restore(flags); } -void local_flush_tlb_one(unsigned long asid, unsigned long page) +void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid, + unsigned long page) { unsigned long addr, data; @@ -91,7 +92,7 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) */ addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT; data = page | asid; /* VALID bit is off */ - jump_to_P2(); + jump_to_uncached(); ctrl_outl(data, addr); - back_to_P1(); + back_to_cached(); } diff --git a/include/asm-sh/fixmap.h b/include/asm-sh/fixmap.h index 09463cd9bbb..721fcc4d5e9 100644 --- a/include/asm-sh/fixmap.h +++ b/include/asm-sh/fixmap.h @@ -49,6 +49,7 @@ enum fixed_addresses { #define FIX_N_COLOURS 16 FIX_CMAP_BEGIN, FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_UNCACHED, #ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, diff --git a/include/asm-sh/sections.h b/include/asm-sh/sections.h index bd9cbc967c2..8f8f4ad400d 100644 --- a/include/asm-sh/sections.h +++ b/include/asm-sh/sections.h @@ -4,6 +4,7 @@ #include extern long __machvec_start, __machvec_end; +extern char __uncached_start, __uncached_end; extern char _ebss[]; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 969f3d4afe2..9bda8d063ec 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -144,6 +144,8 @@ extern unsigned int instruction_size(unsigned int insn); #define instruction_size(insn) (4) #endif +extern unsigned long cached_to_uncached; + /* XXX * disable hlt during certain critical i/o operations */ diff --git a/include/asm-sh/system_32.h b/include/asm-sh/system_32.h index ad37e8d5f31..e918bacd5ec 100644 --- a/include/asm-sh/system_32.h +++ b/include/asm-sh/system_32.h @@ -58,29 +58,31 @@ do { \ last = __last; \ } while (0) +#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) + /* - * Jump to P2 area. - * When handling TLB or caches, we need to do it from P2 area. + * Jump to uncached area. + * When handling TLB or caches, we need to do it from an uncached area. */ -#define jump_to_P2() \ -do { \ - unsigned long __dummy; \ - __asm__ __volatile__( \ - "mov.l 1f, %0\n\t" \ - "or %1, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1: .long 2f\n" \ - "2:" \ - : "=&r" (__dummy) \ - : "r" (0x20000000)); \ +#define jump_to_uncached() \ +do { \ + unsigned long __dummy; \ + \ + __asm__ __volatile__( \ + "mova 1f, %0\n\t" \ + "add %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1:" \ + : "=&z" (__dummy) \ + : "r" (cached_to_uncached)); \ } while (0) /* - * Back to P1 area. + * Back to cached area. */ -#define back_to_P1() \ +#define back_to_cached() \ do { \ unsigned long __dummy; \ ctrl_barrier(); \ diff --git a/include/asm-sh/system_64.h b/include/asm-sh/system_64.h index 0e466e991f7..943acf5ea07 100644 --- a/include/asm-sh/system_64.h +++ b/include/asm-sh/system_64.h @@ -32,8 +32,9 @@ do { \ &next->thread); \ } while (0) -/* No segmentation.. */ -#define jump_to_P2() do { } while (0) -#define back_to_P1() do { } while (0) +#define __uses_jump_to_uncached + +#define jump_to_uncached() do { } while (0) +#define back_to_cached() do { } while (0) #endif /* __ASM_SH_SYSTEM_64_H */ -- cgit v1.2.3-70-g09d2 From d02b08f6e8b184ffef349e395210a5e82ff4f4bc Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 30 Nov 2007 17:52:53 +0900 Subject: sh: Clean up places that make 29-bit physical assumptions. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/boot/compressed/misc_32.c | 5 +++- arch/sh/kernel/setup.c | 4 +-- arch/sh/kernel/vmlinux_32.lds.S | 5 ++++ include/asm-sh/addrspace.h | 6 ++++- include/asm-sh/cpu-sh4/mmu_context.h | 8 +++++- include/asm-sh/io.h | 16 +----------- include/asm-sh/page.h | 50 ++++++++++++++++++++++++++---------- include/asm-sh/pgtable.h | 8 +++++- include/asm-sh/pgtable_32.h | 2 +- include/asm-sh/scatterlist.h | 3 ++- 10 files changed, 71 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c index df65e305acf..adcea31e663 100644 --- a/arch/sh/boot/compressed/misc_32.c +++ b/arch/sh/boot/compressed/misc_32.c @@ -230,7 +230,10 @@ long* stack_start = &user_stack[STACK_SIZE]; void decompress_kernel(void) { output_data = 0; - output_ptr = P2SEGADDR((unsigned long)&_text+PAGE_SIZE); + output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE); +#ifdef CONFIG_29BIT + output_ptr |= P2SEG; +#endif free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 7eb7fdcce0f..f48ce8e5d0a 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -82,7 +82,7 @@ static int __init early_parse_mem(char *p) { unsigned long size; - memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_start = (unsigned long)__va(__MEMORY_START); size = memparse(p, &p); if (size > __MEMORY_SIZE) { @@ -254,7 +254,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; - memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_start = (unsigned long)__va(__MEMORY_START); if (!memory_end) memory_end = memory_start + __MEMORY_SIZE; diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index 50c69c18dce..d549fac6d3e 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -15,7 +15,12 @@ OUTPUT_ARCH(sh) ENTRY(_start) SECTIONS { +#ifdef CONFIG_32BIT + . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET; +#else . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; +#endif + _text = .; /* Text and read-only data */ .empty_zero_page : { diff --git a/include/asm-sh/addrspace.h b/include/asm-sh/addrspace.h index e7f2deb28e0..fa544fc38c2 100644 --- a/include/asm-sh/addrspace.h +++ b/include/asm-sh/addrspace.h @@ -31,6 +31,7 @@ /* Returns the physical address of a PnSEG (n=1,2) address */ #define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) +#ifdef CONFIG_29BIT /* * Map an address to a certain privileged segment */ @@ -42,8 +43,11 @@ ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) #define P4SEGADDR(a) \ ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) - +#endif /* 29BIT */ #endif /* P1SEG */ +/* Check if an address can be reached in 29 bits */ +#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000) + #endif /* __KERNEL__ */ #endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/include/asm-sh/cpu-sh4/mmu_context.h index fdd56e3e3a3..9ea8eb27b18 100644 --- a/include/asm-sh/cpu-sh4/mmu_context.h +++ b/include/asm-sh/cpu-sh4/mmu_context.h @@ -30,6 +30,12 @@ #define MMUCR_ME (0) #endif +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) +#define MMUCR_SE (1 << 4) +#else +#define MMUCR_SE (0) +#endif + #ifdef CONFIG_SH_STORE_QUEUES #define MMUCR_SQMD (1 << 9) #else @@ -37,7 +43,7 @@ #endif #define MMU_NTLB_ENTRIES 64 -#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME) +#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) #define MMU_ITLB_DATA_ARRAY 0xF3000000 #define MMU_UTLB_DATA_ARRAY 0xF7000000 diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index a4e5f5573ee..94900c08951 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -273,23 +273,9 @@ extern void onchip_unmap(unsigned long vaddr); #if !defined(CONFIG_MMU) #define virt_to_phys(address) ((unsigned long)(address)) #define phys_to_virt(address) ((void *)(address)) -#elif defined(CONFIG_SUPERH64) +#else #define virt_to_phys(address) (__pa(address)) #define phys_to_virt(address) (__va(address)) -#else -/* - * Change virtual addresses to physical addresses and vv. - * These are trivial on the 1:1 Linux/SuperH mapping - */ -static inline unsigned long virt_to_phys(volatile void *address) -{ - return PHYSADDR(address); -} - -static inline void *phys_to_virt(unsigned long address) -{ - return (void *)P1SEGADDR(address); -} #endif /* diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index bff635a078c..002e64a4f04 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -5,6 +5,8 @@ * Copyright (C) 1999 Niibe Yutaka */ +#include + #ifdef __KERNEL__ /* PAGE_SHIFT determines the page size */ @@ -18,15 +20,13 @@ # error "Bogus kernel page size?" #endif -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif - +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #define PTE_MASK PAGE_MASK +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + #if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) #define HPAGE_SHIFT 16 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) @@ -104,20 +104,44 @@ typedef struct { unsigned long pgd; } pgd_t; #endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - +/* + * __MEMORY_START and SIZE are the physical addresses and size of RAM. + */ #define __MEMORY_START CONFIG_MEMORY_START #define __MEMORY_SIZE CONFIG_MEMORY_SIZE +/* + * PAGE_OFFSET is the virtual address of the start of kernel address + * space. + */ #define PAGE_OFFSET CONFIG_PAGE_OFFSET -#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) -#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +/* + * Virtual to physical RAM address translation. + * + * In 29 bit mode, the physical offset of RAM from address 0 is visible in + * the kernel virtual address space, and thus we don't have to take + * this into account when translating. However in 32 bit mode this offset + * is not visible (it is part of the PMB mapping) and so needs to be + * added or subtracted as required. + */ +#ifdef CONFIG_32BIT +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) +#else +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#endif + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) -/* PFN start number, because of __MEMORY_START */ +/* + * PFN = physical frame number (ie PFN 0 == physical address 0) + * PFN_START is the PFN of the first page of RAM. By defining this we + * don't have struct page entries for the portion of address space + * between physical address 0 and the start of RAM. + */ #define PFN_START (__MEMORY_START >> PAGE_SHIFT) #define ARCH_PFN_OFFSET (PFN_START) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index b4d7561cd9e..3df90f003e9 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -69,7 +69,13 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -#define PTE_PHYS_MASK (0x20000000 - PAGE_SIZE) +#ifdef CONFIG_32BIT +#define PHYS_ADDR_MASK 0xffffffff +#else +#define PHYS_ADDR_MASK 0x1fffffff +#endif + +#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) #ifdef CONFIG_SUPERH32 #define VMALLOC_START (P3SEG) diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h index 70303603e89..7efc95404c6 100644 --- a/include/asm-sh/pgtable_32.h +++ b/include/asm-sh/pgtable_32.h @@ -98,7 +98,7 @@ #define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) #endif -#define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS)) +#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) /* Hardware flags, page size encoding */ #if defined(CONFIG_X2TLB) diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h index a7d0d1856a9..35ef9c30f0d 100644 --- a/include/asm-sh/scatterlist.h +++ b/include/asm-sh/scatterlist.h @@ -1,6 +1,7 @@ #ifndef __ASM_SH_SCATTERLIST_H #define __ASM_SH_SCATTERLIST_H +#include #include struct scatterlist { @@ -13,7 +14,7 @@ struct scatterlist { unsigned int length; }; -#define ISA_DMA_THRESHOLD (0x1fffffff) +#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK /* These macros should be used after a pci_map_sg call has been done * to get bus addresses of each of the SG entries and their lengths. -- cgit v1.2.3-70-g09d2 From fc55888f83c1c0ac09abe4680f9a94fc0662677f Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 30 Nov 2007 18:05:18 +0900 Subject: sh: Document PTEL 31:29 use on PTEA-wielding parts. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- include/asm-sh/pgtable_32.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h index 7efc95404c6..3e3557c53c5 100644 --- a/include/asm-sh/pgtable_32.h +++ b/include/asm-sh/pgtable_32.h @@ -22,8 +22,9 @@ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. * - * - Bits 31, 30, and 29 remain unused by everyone and can be used for future - * software flags, although care must be taken to update _PAGE_CLEAR_FLAGS. + * - On 29 bit platforms, bits 31 to 29 are used for the space attributes + * and timing control which (together with bit 0) are moved into the + * old-style PTEA on the parts that support it. * * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. * -- cgit v1.2.3-70-g09d2 From 0fb19dcb64ec4bd9934eee26ce66417fe028ffd8 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 30 Nov 2007 18:16:23 +0900 Subject: sh: get_user fixes and nommu consolidation. When a get_user(to, from++) is called the pointer increment is performed after its first usage, in the specific after the __add_ok invokation. This causes a wrong get_user return value, putting a wrong character in the destination variable. This patch solves the problem using a new temporary pointer. Additionally this reworks the use of the register banks, allowing for consolidation between the MMU and nommu implementations. Signed-off-by: Carmelo Amoroso Signed-off-by: Giuseppe Condorelli Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_32.h | 253 +++++++++++++++++--------------------------- 1 file changed, 98 insertions(+), 155 deletions(-) (limited to 'include') diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index f18a1a5c95c..59a9f20c2dc 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -73,37 +73,24 @@ static inline int __access_ok(unsigned long addr, unsigned long size) /* * __access_ok: Check if address with size is OK or not. * - * We do three checks: - * (1) is it user space? - * (2) addr + size --> carry? - * (3) addr + size >= 0x80000000 (PAGE_OFFSET) + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. * - * (1) (2) (3) | RESULT - * 0 0 0 | ok - * 0 0 1 | ok - * 0 1 0 | bad - * 0 1 1 | bad - * 1 0 0 | ok - * 1 0 1 | bad - * 1 1 0 | bad - * 1 1 1 | bad + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; */ static inline int __access_ok(unsigned long addr, unsigned long size) { - unsigned long flag, tmp; - - __asm__("stc r7_bank, %0\n\t" - "mov.l @(8,%0), %0\n\t" - "clrt\n\t" - "addc %2, %1\n\t" - "and %1, %0\n\t" - "rotcl %0\n\t" - "rotcl %0\n\t" - "and #3, %0" - : "=&z" (flag), "=r" (tmp) - : "r" (addr), "1" (size) - : "t"); - + unsigned long flag, sum; + + __asm__("clrt\n\t" + "addc %3, %1\n\t" + "movt %0\n\t" + "cmp/hi %4, %1\n\t" + "rotcl %0" + :"=&r" (flag), "=r" (sum) + :"1" (addr), "r" (size), + "r" (current_thread_info()->addr_limit.seg) + :"t"); return flag == 0; } #endif /* CONFIG_MMU */ @@ -165,135 +152,47 @@ do { \ #define __get_user_nocheck(x,ptr,size) \ ({ \ long __gu_err, __gu_val; \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + __typeof__(*(ptr)) *__pu_addr = (ptr); \ + __get_user_size(__gu_val, (__pu_addr), (size), __gu_err); \ (x) = (__typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) -#ifdef CONFIG_MMU -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __chk_user_ptr(ptr); \ - switch (size) { \ - case 1: \ - __get_user_1(__gu_val, (ptr), __gu_err); \ - break; \ - case 2: \ - __get_user_2(__gu_val, (ptr), __gu_err); \ - break; \ - case 4: \ - __get_user_4(__gu_val, (ptr), __gu_err); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ - \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_1(x,addr,err) ({ \ -__asm__("stc r7_bank, %1\n\t" \ - "mov.l @(8,%1), %1\n\t" \ - "and %2, %1\n\t" \ - "cmp/pz %1\n\t" \ - "bt/s 1f\n\t" \ - " mov #0, %0\n\t" \ - "0:\n" \ - "mov #-14, %0\n\t" \ - "bra 2f\n\t" \ - " mov #0, %1\n" \ - "1:\n\t" \ - "mov.b @%2, %1\n\t" \ - "extu.b %1, %1\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 0b\n\t" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr) \ - : "t"); \ -}) - -#define __get_user_2(x,addr,err) ({ \ -__asm__("stc r7_bank, %1\n\t" \ - "mov.l @(8,%1), %1\n\t" \ - "and %2, %1\n\t" \ - "cmp/pz %1\n\t" \ - "bt/s 1f\n\t" \ - " mov #0, %0\n\t" \ - "0:\n" \ - "mov #-14, %0\n\t" \ - "bra 2f\n\t" \ - " mov #0, %1\n" \ - "1:\n\t" \ - "mov.w @%2, %1\n\t" \ - "extu.w %1, %1\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 0b\n\t" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr) \ - : "t"); \ -}) - -#define __get_user_4(x,addr,err) ({ \ -__asm__("stc r7_bank, %1\n\t" \ - "mov.l @(8,%1), %1\n\t" \ - "and %2, %1\n\t" \ - "cmp/pz %1\n\t" \ - "bt/s 1f\n\t" \ - " mov #0, %0\n\t" \ - "0:\n" \ - "mov #-14, %0\n\t" \ - "bra 2f\n\t" \ - " mov #0, %1\n" \ - "1:\n\t" \ - "mov.l @%2, %1\n\t" \ - "2:\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 0b\n\t" \ - ".previous" \ - : "=&r" (err), "=&r" (x) \ - : "r" (addr) \ - : "t"); \ -}) -#else /* CONFIG_MMU */ #define __get_user_check(x,ptr,size) \ ({ \ long __gu_err, __gu_val; \ - if (__access_ok((unsigned long)(ptr), (size))) { \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - } else \ + __typeof__(*(ptr)) *__pu_addr = (ptr); \ + __chk_user_ptr(__pu_addr); \ + if (likely(__addr_ok((unsigned long)(__pu_addr)))) { \ + __get_user_size(__gu_val, (__pu_addr), (size), __gu_err);\ + } else { \ __gu_err = -EFAULT; \ + __gu_val = 0; \ + } \ + (x) = (__typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) -#endif #define __get_user_asm(x, addr, err, insn) \ ({ \ __asm__ __volatile__( \ "1:\n\t" \ "mov." insn " %2, %1\n\t" \ - "mov #0, %0\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3:\n\t" \ "mov #0, %1\n\t" \ "mov.l 4f, %0\n\t" \ "jmp @%0\n\t" \ - " mov %3, %0\n" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ "4: .long 2b\n\t" \ ".previous\n" \ ".section __ex_table,\"a\"\n\t" \ ".long 1b, 3b\n\t" \ ".previous" \ :"=&r" (err), "=&r" (x) \ - :"m" (__m(addr)), "i" (-EFAULT)); }) + :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) extern void __get_user_unknown(void); @@ -328,11 +227,13 @@ do { \ #define __put_user_check(x,ptr,size) \ ({ \ - long __pu_err = -EFAULT; \ + long __pu_err; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ \ - if (__access_ok((unsigned long)__pu_addr,size)) \ + if (likely(__addr_ok((unsigned long)__pu_addr))) \ __put_user_size((x),__pu_addr,(size),__pu_err); \ + else \ + __pu_err = -EFAULT; \ __pu_err; \ }) @@ -341,45 +242,43 @@ do { \ __asm__ __volatile__( \ "1:\n\t" \ "mov." insn " %1, %2\n\t" \ - "mov #0, %0\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3:\n\t" \ - "nop\n\t" \ "mov.l 4f, %0\n\t" \ "jmp @%0\n\t" \ - "mov %3, %0\n" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ "4: .long 2b\n\t" \ ".previous\n" \ ".section __ex_table,\"a\"\n\t" \ ".long 1b, 3b\n\t" \ ".previous" \ :"=&r" (err) \ - :"r" (x), "m" (__m(addr)), "i" (-EFAULT) \ + :"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err) \ :"memory"); }) -#if defined(__LITTLE_ENDIAN__) +#if defined(CONFIG_CPU_LITTLE_ENDIAN) #define __put_user_u64(val,addr,retval) \ ({ \ __asm__ __volatile__( \ "1:\n\t" \ "mov.l %R1,%2\n\t" \ "mov.l %S1,%T2\n\t" \ - "mov #0,%0\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3:\n\t" \ - "nop\n\t" \ "mov.l 4f,%0\n\t" \ "jmp @%0\n\t" \ - " mov %3,%0\n" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ "4: .long 2b\n\t" \ ".previous\n" \ ".section __ex_table,\"a\"\n\t" \ ".long 1b, 3b\n\t" \ ".previous" \ : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ : "memory"); }) #else #define __put_user_u64(val,addr,retval) \ @@ -388,21 +287,20 @@ __asm__ __volatile__( \ "1:\n\t" \ "mov.l %S1,%2\n\t" \ "mov.l %R1,%T2\n\t" \ - "mov #0,%0\n" \ "2:\n" \ ".section .fixup,\"ax\"\n" \ "3:\n\t" \ - "nop\n\t" \ "mov.l 4f,%0\n\t" \ "jmp @%0\n\t" \ - " mov %3,%0\n" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ "4: .long 2b\n\t" \ ".previous\n" \ ".section __ex_table,\"a\"\n\t" \ ".long 1b, 3b\n\t" \ ".previous" \ : "=r" (retval) \ - : "r" (val), "m" (__m(addr)), "i" (-EFAULT) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ : "memory"); }) #endif @@ -463,7 +361,7 @@ static __inline__ int __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) { __kernel_size_t res; - unsigned long __dummy, _d, _s; + unsigned long __dummy, _d, _s, _c; __asm__ __volatile__( "9:\n" @@ -472,17 +370,17 @@ __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __coun "bt/s 2f\n" "1:\n" "mov.b %1, @%3\n\t" - "dt %7\n\t" + "dt %4\n\t" "bf/s 9b\n\t" " add #1, %3\n\t" "2:\n\t" - "sub %7, %0\n" + "sub %4, %0\n" "3:\n" ".section .fixup,\"ax\"\n" "4:\n\t" "mov.l 5f, %1\n\t" "jmp @%1\n\t" - " mov %8, %0\n\t" + " mov %9, %0\n\t" ".balign 4\n" "5: .long 3b\n" ".previous\n" @@ -490,14 +388,32 @@ __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __coun " .balign 4\n" " .long 9b,4b\n" ".previous" - : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d) - : "0" (__count), "2" (__src), "3" (__dest), "r" (__count), + : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) + : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), "i" (-EFAULT) : "memory", "t"); return res; } +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ #define strncpy_from_user(dest,src,count) ({ \ unsigned long __sfu_src = (unsigned long) (src); \ int __sfu_count = (int) (count); \ @@ -507,7 +423,8 @@ __sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); } __sfu_res; }) /* - * Return the size of a string (including the ending 0!) + * Return the size of a string (including the ending 0 even when we have + * exceeded the maximum string length). */ static __inline__ long __strnlen_user(const char __user *__s, long __n) { @@ -515,14 +432,13 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) unsigned long __dummy; __asm__ __volatile__( - "9:\n" - "cmp/eq %4, %0\n\t" - "bt 2f\n" "1:\t" "mov.b @(%0,%3), %1\n\t" + "cmp/eq %4, %0\n\t" + "bt/s 2f\n\t" + " add #1, %0\n\t" "tst %1, %1\n\t" - "bf/s 9b\n\t" - " add #1, %0\n" + "bf 1b\n\t" "2:\n" ".section .fixup,\"ax\"\n" "3:\n\t" @@ -542,6 +458,19 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) return res; } +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ static __inline__ long strnlen_user(const char __user *s, long n) { if (!__addr_ok(s)) @@ -550,6 +479,20 @@ static __inline__ long strnlen_user(const char __user *s, long n) return __strnlen_user(s, n); } +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ #define strlen_user(str) strnlen_user(str, ~0UL >> 1) /* -- cgit v1.2.3-70-g09d2 From c8c0a1aba9fa8f816dc8fb477ff816a5b700f0ea Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 30 Nov 2007 18:42:27 +0900 Subject: sh: Support denormalization on SH-4 FPU. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/Makefile | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 514 +++++++++++++-------- arch/sh/kernel/cpu/sh4/softfloat.c | 892 +++++++++++++++++++++++++++++++++++++ include/asm-sh/cpu-sh4/fpu.h | 32 ++ 4 files changed, 1259 insertions(+), 181 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh4/softfloat.c create mode 100644 include/asm-sh/cpu-sh4/fpu.h (limited to 'include') diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index dadd6bffc12..d608557c7a3 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -5,7 +5,7 @@ obj-y := probe.o common.o common-y += $(addprefix ../sh3/, entry.o ex.o) -obj-$(CONFIG_SH_FPU) += fpu.o +obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o # CPU subtype setup diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index e624180b446..817f9939cda 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -1,7 +1,4 @@ -/* $Id: fpu.c,v 1.4 2004/01/13 05:52:11 kkojima Exp $ - * - * linux/arch/sh/kernel/fpu.c - * +/* * Save/restore floating point context for signal handlers. * * This file is subject to the terms and conditions of the GNU General Public @@ -9,15 +6,16 @@ * for more details. * * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * Copyright (C) 2006 ST Microelectronics Ltd. (denorm support) * - * FIXME! These routines can be optimized in big endian case. + * FIXME! These routines have not been tested for big endian case. */ - #include #include +#include +#include #include #include -#include /* The PR (precision) bit in the FP Status Register must be clear when * an frchg instruction is executed, otherwise the instruction is undefined. @@ -25,113 +23,122 @@ */ #define FPSCR_RCHG 0x00000000 +extern unsigned long long float64_div(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_div(unsigned long int a, unsigned long int b); +extern unsigned long long float64_mul(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_mul(unsigned long int a, unsigned long int b); +extern unsigned long long float64_add(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_add(unsigned long int a, unsigned long int b); +extern unsigned long long float64_sub(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_sub(unsigned long int a, unsigned long int b); +static unsigned int fpu_exception_flags; /* * Save FPU registers onto task structure. * Assume called with FPU enabled (SR.FD=0). */ -void -save_fpu(struct task_struct *tsk, struct pt_regs *regs) +void save_fpu(struct task_struct *tsk, struct pt_regs *regs) { unsigned long dummy; clear_tsk_thread_flag(tsk, TIF_USEDFPU); enable_fpu(); - asm volatile("sts.l fpul, @-%0\n\t" - "sts.l fpscr, @-%0\n\t" - "lds %2, fpscr\n\t" - "frchg\n\t" - "fmov.s fr15, @-%0\n\t" - "fmov.s fr14, @-%0\n\t" - "fmov.s fr13, @-%0\n\t" - "fmov.s fr12, @-%0\n\t" - "fmov.s fr11, @-%0\n\t" - "fmov.s fr10, @-%0\n\t" - "fmov.s fr9, @-%0\n\t" - "fmov.s fr8, @-%0\n\t" - "fmov.s fr7, @-%0\n\t" - "fmov.s fr6, @-%0\n\t" - "fmov.s fr5, @-%0\n\t" - "fmov.s fr4, @-%0\n\t" - "fmov.s fr3, @-%0\n\t" - "fmov.s fr2, @-%0\n\t" - "fmov.s fr1, @-%0\n\t" - "fmov.s fr0, @-%0\n\t" - "frchg\n\t" - "fmov.s fr15, @-%0\n\t" - "fmov.s fr14, @-%0\n\t" - "fmov.s fr13, @-%0\n\t" - "fmov.s fr12, @-%0\n\t" - "fmov.s fr11, @-%0\n\t" - "fmov.s fr10, @-%0\n\t" - "fmov.s fr9, @-%0\n\t" - "fmov.s fr8, @-%0\n\t" - "fmov.s fr7, @-%0\n\t" - "fmov.s fr6, @-%0\n\t" - "fmov.s fr5, @-%0\n\t" - "fmov.s fr4, @-%0\n\t" - "fmov.s fr3, @-%0\n\t" - "fmov.s fr2, @-%0\n\t" - "fmov.s fr1, @-%0\n\t" - "fmov.s fr0, @-%0\n\t" - "lds %3, fpscr\n\t" - : "=r" (dummy) - : "0" ((char *)(&tsk->thread.fpu.hard.status)), - "r" (FPSCR_RCHG), - "r" (FPSCR_INIT) - : "memory"); + asm volatile ("sts.l fpul, @-%0\n\t" + "sts.l fpscr, @-%0\n\t" + "lds %2, fpscr\n\t" + "frchg\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "frchg\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "lds %3, fpscr\n\t":"=r" (dummy) + :"0"((char *)(&tsk->thread.fpu.hard.status)), + "r"(FPSCR_RCHG), "r"(FPSCR_INIT) + :"memory"); disable_fpu(); release_fpu(regs); } -static void -restore_fpu(struct task_struct *tsk) +static void restore_fpu(struct task_struct *tsk) { unsigned long dummy; enable_fpu(); - asm volatile("lds %2, fpscr\n\t" - "fmov.s @%0+, fr0\n\t" - "fmov.s @%0+, fr1\n\t" - "fmov.s @%0+, fr2\n\t" - "fmov.s @%0+, fr3\n\t" - "fmov.s @%0+, fr4\n\t" - "fmov.s @%0+, fr5\n\t" - "fmov.s @%0+, fr6\n\t" - "fmov.s @%0+, fr7\n\t" - "fmov.s @%0+, fr8\n\t" - "fmov.s @%0+, fr9\n\t" - "fmov.s @%0+, fr10\n\t" - "fmov.s @%0+, fr11\n\t" - "fmov.s @%0+, fr12\n\t" - "fmov.s @%0+, fr13\n\t" - "fmov.s @%0+, fr14\n\t" - "fmov.s @%0+, fr15\n\t" - "frchg\n\t" - "fmov.s @%0+, fr0\n\t" - "fmov.s @%0+, fr1\n\t" - "fmov.s @%0+, fr2\n\t" - "fmov.s @%0+, fr3\n\t" - "fmov.s @%0+, fr4\n\t" - "fmov.s @%0+, fr5\n\t" - "fmov.s @%0+, fr6\n\t" - "fmov.s @%0+, fr7\n\t" - "fmov.s @%0+, fr8\n\t" - "fmov.s @%0+, fr9\n\t" - "fmov.s @%0+, fr10\n\t" - "fmov.s @%0+, fr11\n\t" - "fmov.s @%0+, fr12\n\t" - "fmov.s @%0+, fr13\n\t" - "fmov.s @%0+, fr14\n\t" - "fmov.s @%0+, fr15\n\t" - "frchg\n\t" - "lds.l @%0+, fpscr\n\t" - "lds.l @%0+, fpul\n\t" - : "=r" (dummy) - : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG) - : "memory"); + asm volatile ("lds %2, fpscr\n\t" + "fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "frchg\n\t" + "fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "frchg\n\t" + "lds.l @%0+, fpscr\n\t" + "lds.l @%0+, fpul\n\t" + :"=r" (dummy) + :"0"(&tsk->thread.fpu), "r"(FPSCR_RCHG) + :"memory"); disable_fpu(); } @@ -141,61 +148,59 @@ restore_fpu(struct task_struct *tsk) * double precision represents signaling NANS. */ -static void -fpu_init(void) +static void fpu_init(void) { enable_fpu(); - asm volatile("lds %0, fpul\n\t" - "lds %1, fpscr\n\t" - "fsts fpul, fr0\n\t" - "fsts fpul, fr1\n\t" - "fsts fpul, fr2\n\t" - "fsts fpul, fr3\n\t" - "fsts fpul, fr4\n\t" - "fsts fpul, fr5\n\t" - "fsts fpul, fr6\n\t" - "fsts fpul, fr7\n\t" - "fsts fpul, fr8\n\t" - "fsts fpul, fr9\n\t" - "fsts fpul, fr10\n\t" - "fsts fpul, fr11\n\t" - "fsts fpul, fr12\n\t" - "fsts fpul, fr13\n\t" - "fsts fpul, fr14\n\t" - "fsts fpul, fr15\n\t" - "frchg\n\t" - "fsts fpul, fr0\n\t" - "fsts fpul, fr1\n\t" - "fsts fpul, fr2\n\t" - "fsts fpul, fr3\n\t" - "fsts fpul, fr4\n\t" - "fsts fpul, fr5\n\t" - "fsts fpul, fr6\n\t" - "fsts fpul, fr7\n\t" - "fsts fpul, fr8\n\t" - "fsts fpul, fr9\n\t" - "fsts fpul, fr10\n\t" - "fsts fpul, fr11\n\t" - "fsts fpul, fr12\n\t" - "fsts fpul, fr13\n\t" - "fsts fpul, fr14\n\t" - "fsts fpul, fr15\n\t" - "frchg\n\t" - "lds %2, fpscr\n\t" - : /* no output */ - : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT)); + asm volatile ( "lds %0, fpul\n\t" + "lds %1, fpscr\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "frchg\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "frchg\n\t" + "lds %2, fpscr\n\t" + : /* no output */ + :"r" (0), "r"(FPSCR_RCHG), "r"(FPSCR_INIT)); disable_fpu(); } /** - * denormal_to_double - Given denormalized float number, - * store double float + * denormal_to_double - Given denormalized float number, + * store double float * - * @fpu: Pointer to sh_fpu_hard structure - * @n: Index to FP register + * @fpu: Pointer to sh_fpu_hard structure + * @n: Index to FP register */ -static void -denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) +static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n) { unsigned long du, dl; unsigned long x = fpu->fpul; @@ -212,7 +217,7 @@ denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) dl = x << 29; fpu->fp_regs[n] = du; - fpu->fp_regs[n+1] = dl; + fpu->fp_regs[n + 1] = dl; } } @@ -223,67 +228,191 @@ denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) * * Returns 1 when it's handled (should not cause exception). */ -static int -ieee_fpe_handler (struct pt_regs *regs) +static int ieee_fpe_handler(struct pt_regs *regs) { - unsigned short insn = *(unsigned short *) regs->pc; + unsigned short insn = *(unsigned short *)regs->pc; unsigned short finsn; unsigned long nextpc; int nib[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, - insn & 0xf}; - - if (nib[0] == 0xb || - (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ - regs->pr = regs->pc + 4; - if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ - nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); - finsn = *(unsigned short *) (regs->pc + 2); - } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */ + insn & 0xf + }; + + if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) + regs->pr = regs->pc + 4; /* bsr & jsr */ + + if (nib[0] == 0xa || nib[0] == 0xb) { + /* bra & bsr */ + nextpc = regs->pc + 4 + ((short)((insn & 0xfff) << 4) >> 3); + finsn = *(unsigned short *)(regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xd) { + /* bt/s */ if (regs->sr & 1) - nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1); else nextpc = regs->pc + 4; - finsn = *(unsigned short *) (regs->pc + 2); - } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */ + finsn = *(unsigned short *)(regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xf) { + /* bf/s */ if (regs->sr & 1) nextpc = regs->pc + 4; else - nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); - finsn = *(unsigned short *) (regs->pc + 2); + nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1); + finsn = *(unsigned short *)(regs->pc + 2); } else if (nib[0] == 0x4 && nib[3] == 0xb && - (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */ + (nib[2] == 0x0 || nib[2] == 0x2)) { + /* jmp & jsr */ nextpc = regs->regs[nib[1]]; - finsn = *(unsigned short *) (regs->pc + 2); + finsn = *(unsigned short *)(regs->pc + 2); } else if (nib[0] == 0x0 && nib[3] == 0x3 && - (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */ + (nib[2] == 0x0 || nib[2] == 0x2)) { + /* braf & bsrf */ nextpc = regs->pc + 4 + regs->regs[nib[1]]; - finsn = *(unsigned short *) (regs->pc + 2); - } else if (insn == 0x000b) { /* rts */ + finsn = *(unsigned short *)(regs->pc + 2); + } else if (insn == 0x000b) { + /* rts */ nextpc = regs->pr; - finsn = *(unsigned short *) (regs->pc + 2); + finsn = *(unsigned short *)(regs->pc + 2); } else { nextpc = regs->pc + instruction_size(insn); finsn = insn; } - if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */ + if ((finsn & 0xf1ff) == 0xf0ad) { + /* fcnvsd */ struct task_struct *tsk = current; save_fpu(tsk, regs); - if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) { + if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)) /* FPU error */ - denormal_to_double (&tsk->thread.fpu.hard, - (finsn >> 8) & 0xf); - tsk->thread.fpu.hard.fpscr &= - ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); - grab_fpu(regs); - restore_fpu(tsk); - set_tsk_thread_flag(tsk, TIF_USEDFPU); + denormal_to_double(&tsk->thread.fpu.hard, + (finsn >> 8) & 0xf); + else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00f) == 0xf002) { + /* fmul */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & FPSCR_DBL_PRECISION; + + if ((fpscr & FPSCR_CAUSE_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal (doubles) */ + llx = ((long long)hx << 32) + | tsk->thread.fpu.hard.fp_regs[n + 1]; + lly = ((long long)hy << 32) + | tsk->thread.fpu.hard.fp_regs[m + 1]; + llx = float64_mul(llx, lly); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_CAUSE_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal (floats) */ + hx = float32_mul(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00e) == 0xf000) { + /* fadd, fsub */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & FPSCR_DBL_PRECISION; + + if ((fpscr & FPSCR_CAUSE_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal (doubles) */ + llx = ((long long)hx << 32) + | tsk->thread.fpu.hard.fp_regs[n + 1]; + lly = ((long long)hy << 32) + | tsk->thread.fpu.hard.fp_regs[m + 1]; + if ((finsn & 0xf00f) == 0xf000) + llx = float64_add(llx, lly); + else + llx = float64_sub(llx, lly); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_CAUSE_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal (floats) */ + if ((finsn & 0xf00f) == 0xf000) + hx = float32_add(hx, hy); + else + hx = float32_sub(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf003) == 0xf003) { + /* fdiv */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & FPSCR_DBL_PRECISION; + + if ((fpscr & FPSCR_CAUSE_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal (doubles) */ + llx = ((long long)hx << 32) + | tsk->thread.fpu.hard.fp_regs[n + 1]; + lly = ((long long)hy << 32) + | tsk->thread.fpu.hard.fp_regs[m + 1]; + + llx = float64_div(llx, lly); + + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_CAUSE_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal (floats) */ + hx = float32_div(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; } else - force_sig(SIGFPE, tsk); + return 0; regs->pc = nextpc; return 1; @@ -292,16 +421,41 @@ ieee_fpe_handler (struct pt_regs *regs) return 0; } +void float_raise(unsigned int flags) +{ + fpu_exception_flags |= flags; +} + +int float_rounding_mode(void) +{ + struct task_struct *tsk = current; + int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.fpu.hard.fpscr); + return roundingMode; +} + BUILD_TRAP_HANDLER(fpu_error) { struct task_struct *tsk = current; TRAP_HANDLER_DECL; - if (ieee_fpe_handler(regs)) - return; - - regs->pc += 2; save_fpu(tsk, regs); + fpu_exception_flags = 0; + if (ieee_fpe_handler(regs)) { + tsk->thread.fpu.hard.fpscr &= + ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); + tsk->thread.fpu.hard.fpscr |= fpu_exception_flags; + /* Set the FPSCR flag as well as cause bits - simply + * replicate the cause */ + tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10); + grab_fpu(regs); + restore_fpu(tsk); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) & + (fpu_exception_flags >> 2)) == 0) { + return; + } + } + force_sig(SIGFPE, tsk); } @@ -319,7 +473,7 @@ BUILD_TRAP_HANDLER(fpu_state_restore) if (used_math()) { /* Using the FPU again. */ restore_fpu(tsk); - } else { + } else { /* First time FPU user. */ fpu_init(); set_used_math(); diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c new file mode 100644 index 00000000000..7b2d337ee41 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -0,0 +1,892 @@ +/* + * Floating point emulation support for subnormalised numbers on SH4 + * architecture This file is derived from the SoftFloat IEC/IEEE + * Floating-point Arithmetic Package, Release 2 the original license of + * which is reproduced below. + * + * ======================================================================== + * + * This C source file is part of the SoftFloat IEC/IEEE Floating-point + * Arithmetic Package, Release 2. + * + * Written by John R. Hauser. This work was made possible in part by the + * International Computer Science Institute, located at Suite 600, 1947 Center + * Street, Berkeley, California 94704. Funding was partially provided by the + * National Science Foundation under grant MIP-9311980. The original version + * of this code was written as part of a project to build a fixed-point vector + * processor in collaboration with the University of California at Berkeley, + * overseen by Profs. Nelson Morgan and John Wawrzynek. More information + * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ + * arithmetic/softfloat.html'. + * + * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort + * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT + * TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO + * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY + * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. + * + * Derivative works are acceptable, even for commercial purposes, so long as + * (1) they include prominent notice that the work is derivative, and (2) they + * include prominent notice akin to these three paragraphs for those parts of + * this code that are retained. + * + * ======================================================================== + * + * SH4 modifications by Ismail Dhaoui + * and Kamel Khelifi + */ +#include +#include + +#define LIT64( a ) a##LL + +typedef char flag; +typedef unsigned char uint8; +typedef signed char int8; +typedef int uint16; +typedef int int16; +typedef unsigned int uint32; +typedef signed int int32; + +typedef unsigned long long int bits64; +typedef signed long long int sbits64; + +typedef unsigned char bits8; +typedef signed char sbits8; +typedef unsigned short int bits16; +typedef signed short int sbits16; +typedef unsigned int bits32; +typedef signed int sbits32; + +typedef unsigned long long int uint64; +typedef signed long long int int64; + +typedef unsigned long int float32; +typedef unsigned long long float64; + +extern void float_raise(unsigned int flags); /* in fpu.c */ +extern int float_rounding_mode(void); /* in fpu.c */ + +inline bits64 extractFloat64Frac(float64 a); +inline flag extractFloat64Sign(float64 a); +inline int16 extractFloat64Exp(float64 a); +inline int16 extractFloat32Exp(float32 a); +inline flag extractFloat32Sign(float32 a); +inline bits32 extractFloat32Frac(float32 a); +inline float64 packFloat64(flag zSign, int16 zExp, bits64 zSig); +inline void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr); +inline float32 packFloat32(flag zSign, int16 zExp, bits32 zSig); +inline void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr); +float64 float64_sub(float64 a, float64 b); +float32 float32_sub(float32 a, float32 b); +float32 float32_add(float32 a, float32 b); +float64 float64_add(float64 a, float64 b); +float64 float64_div(float64 a, float64 b); +float32 float32_div(float32 a, float32 b); +float32 float32_mul(float32 a, float32 b); +float64 float64_mul(float64 a, float64 b); +inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr); +inline void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr); +inline void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr); + +static int8 countLeadingZeros32(bits32 a); +static int8 countLeadingZeros64(bits64 a); +static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, + bits64 zSig); +static float64 subFloat64Sigs(float64 a, float64 b, flag zSign); +static float64 addFloat64Sigs(float64 a, float64 b, flag zSign); +static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig); +static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, + bits32 zSig); +static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig); +static float32 subFloat32Sigs(float32 a, float32 b, flag zSign); +static float32 addFloat32Sigs(float32 a, float32 b, flag zSign); +static void normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, + bits64 * zSigPtr); +static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b); +static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr, + bits32 * zSigPtr); + +inline bits64 extractFloat64Frac(float64 a) +{ + return a & LIT64(0x000FFFFFFFFFFFFF); +} + +inline flag extractFloat64Sign(float64 a) +{ + return a >> 63; +} + +inline int16 extractFloat64Exp(float64 a) +{ + return (a >> 52) & 0x7FF; +} + +inline int16 extractFloat32Exp(float32 a) +{ + return (a >> 23) & 0xFF; +} + +inline flag extractFloat32Sign(float32 a) +{ + return a >> 31; +} + +inline bits32 extractFloat32Frac(float32 a) +{ + return a & 0x007FFFFF; +} + +inline float64 packFloat64(flag zSign, int16 zExp, bits64 zSig) +{ + return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig; +} + +inline void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr) +{ + bits64 z; + + if (count == 0) { + z = a; + } else if (count < 64) { + z = (a >> count) | ((a << ((-count) & 63)) != 0); + } else { + z = (a != 0); + } + *zPtr = z; +} + +static int8 countLeadingZeros32(bits32 a) +{ + static const int8 countLeadingZerosHigh[] = { + 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + int8 shiftCount; + + shiftCount = 0; + if (a < 0x10000) { + shiftCount += 16; + a <<= 16; + } + if (a < 0x1000000) { + shiftCount += 8; + a <<= 8; + } + shiftCount += countLeadingZerosHigh[a >> 24]; + return shiftCount; + +} + +static int8 countLeadingZeros64(bits64 a) +{ + int8 shiftCount; + + shiftCount = 0; + if (a < ((bits64) 1) << 32) { + shiftCount += 32; + } else { + a >>= 32; + } + shiftCount += countLeadingZeros32(a); + return shiftCount; + +} + +static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros64(zSig) - 1; + return roundAndPackFloat64(zSign, zExp - shiftCount, + zSig << shiftCount); + +} + +static float64 subFloat64Sigs(float64 a, float64 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits64 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + expDiff = aExp - bExp; + aSig <<= 10; + bSig <<= 10; + if (0 < expDiff) + goto aExpBigger; + if (expDiff < 0) + goto bExpBigger; + if (aExp == 0) { + aExp = 1; + bExp = 1; + } + if (bSig < aSig) + goto aBigger; + if (aSig < bSig) + goto bBigger; + return packFloat64(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0); + bExpBigger: + if (bExp == 0x7FF) { + return packFloat64(zSign ^ 1, 0x7FF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= LIT64(0x4000000000000000); + } + shift64RightJamming(aSig, -expDiff, &aSig); + bSig |= LIT64(0x4000000000000000); + bBigger: + zSig = bSig - aSig; + zExp = bExp; + zSign ^= 1; + goto normalizeRoundAndPack; + aExpBigger: + if (aExp == 0x7FF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= LIT64(0x4000000000000000); + } + shift64RightJamming(bSig, expDiff, &bSig); + aSig |= LIT64(0x4000000000000000); + aBigger: + zSig = aSig - bSig; + zExp = aExp; + normalizeRoundAndPack: + --zExp; + return normalizeRoundAndPackFloat64(zSign, zExp, zSig); + +} +static float64 addFloat64Sigs(float64 a, float64 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits64 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + expDiff = aExp - bExp; + aSig <<= 9; + bSig <<= 9; + if (0 < expDiff) { + if (aExp == 0x7FF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= LIT64(0x2000000000000000); + } + shift64RightJamming(bSig, expDiff, &bSig); + zExp = aExp; + } else if (expDiff < 0) { + if (bExp == 0x7FF) { + return packFloat64(zSign, 0x7FF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= LIT64(0x2000000000000000); + } + shift64RightJamming(aSig, -expDiff, &aSig); + zExp = bExp; + } else { + if (aExp == 0x7FF) { + return a; + } + if (aExp == 0) + return packFloat64(zSign, 0, (aSig + bSig) >> 9); + zSig = LIT64(0x4000000000000000) + aSig + bSig; + zExp = aExp; + goto roundAndPack; + } + aSig |= LIT64(0x2000000000000000); + zSig = (aSig + bSig) << 1; + --zExp; + if ((sbits64) zSig < 0) { + zSig = aSig + bSig; + ++zExp; + } + roundAndPack: + return roundAndPackFloat64(zSign, zExp, zSig); + +} + +inline float32 packFloat32(flag zSign, int16 zExp, bits32 zSig) +{ + return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig; +} + +inline void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr) +{ + bits32 z; + if (count == 0) { + z = a; + } else if (count < 32) { + z = (a >> count) | ((a << ((-count) & 31)) != 0); + } else { + z = (a != 0); + } + *zPtr = z; +} + +static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig) +{ + flag roundNearestEven; + int8 roundIncrement, roundBits; + flag isTiny; + + /* SH4 has only 2 rounding modes - round to nearest and round to zero */ + roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST); + roundIncrement = 0x40; + if (!roundNearestEven) { + roundIncrement = 0; + } + roundBits = zSig & 0x7F; + if (0xFD <= (bits16) zExp) { + if ((0xFD < zExp) + || ((zExp == 0xFD) + && ((sbits32) (zSig + roundIncrement) < 0)) + ) { + float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT); + return packFloat32(zSign, 0xFF, + 0) - (roundIncrement == 0); + } + if (zExp < 0) { + isTiny = (zExp < -1) + || (zSig + roundIncrement < 0x80000000); + shift32RightJamming(zSig, -zExp, &zSig); + zExp = 0; + roundBits = zSig & 0x7F; + if (isTiny && roundBits) + float_raise(FPSCR_CAUSE_UNDERFLOW); + } + } + if (roundBits) + float_raise(FPSCR_CAUSE_INEXACT); + zSig = (zSig + roundIncrement) >> 7; + zSig &= ~(((roundBits ^ 0x40) == 0) & roundNearestEven); + if (zSig == 0) + zExp = 0; + return packFloat32(zSign, zExp, zSig); + +} + +static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros32(zSig) - 1; + return roundAndPackFloat32(zSign, zExp - shiftCount, + zSig << shiftCount); +} + +static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig) +{ + flag roundNearestEven; + int16 roundIncrement, roundBits; + flag isTiny; + + /* SH4 has only 2 rounding modes - round to nearest and round to zero */ + roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST); + roundIncrement = 0x200; + if (!roundNearestEven) { + roundIncrement = 0; + } + roundBits = zSig & 0x3FF; + if (0x7FD <= (bits16) zExp) { + if ((0x7FD < zExp) + || ((zExp == 0x7FD) + && ((sbits64) (zSig + roundIncrement) < 0)) + ) { + float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT); + return packFloat64(zSign, 0x7FF, + 0) - (roundIncrement == 0); + } + if (zExp < 0) { + isTiny = (zExp < -1) + || (zSig + roundIncrement < + LIT64(0x8000000000000000)); + shift64RightJamming(zSig, -zExp, &zSig); + zExp = 0; + roundBits = zSig & 0x3FF; + if (isTiny && roundBits) + float_raise(FPSCR_CAUSE_UNDERFLOW); + } + } + if (roundBits) + float_raise(FPSCR_CAUSE_INEXACT); + zSig = (zSig + roundIncrement) >> 10; + zSig &= ~(((roundBits ^ 0x200) == 0) & roundNearestEven); + if (zSig == 0) + zExp = 0; + return packFloat64(zSign, zExp, zSig); + +} + +static float32 subFloat32Sigs(float32 a, float32 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits32 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + expDiff = aExp - bExp; + aSig <<= 7; + bSig <<= 7; + if (0 < expDiff) + goto aExpBigger; + if (expDiff < 0) + goto bExpBigger; + if (aExp == 0) { + aExp = 1; + bExp = 1; + } + if (bSig < aSig) + goto aBigger; + if (aSig < bSig) + goto bBigger; + return packFloat32(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0); + bExpBigger: + if (bExp == 0xFF) { + return packFloat32(zSign ^ 1, 0xFF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= 0x40000000; + } + shift32RightJamming(aSig, -expDiff, &aSig); + bSig |= 0x40000000; + bBigger: + zSig = bSig - aSig; + zExp = bExp; + zSign ^= 1; + goto normalizeRoundAndPack; + aExpBigger: + if (aExp == 0xFF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= 0x40000000; + } + shift32RightJamming(bSig, expDiff, &bSig); + aSig |= 0x40000000; + aBigger: + zSig = aSig - bSig; + zExp = aExp; + normalizeRoundAndPack: + --zExp; + return normalizeRoundAndPackFloat32(zSign, zExp, zSig); + +} + +static float32 addFloat32Sigs(float32 a, float32 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits32 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + expDiff = aExp - bExp; + aSig <<= 6; + bSig <<= 6; + if (0 < expDiff) { + if (aExp == 0xFF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= 0x20000000; + } + shift32RightJamming(bSig, expDiff, &bSig); + zExp = aExp; + } else if (expDiff < 0) { + if (bExp == 0xFF) { + return packFloat32(zSign, 0xFF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= 0x20000000; + } + shift32RightJamming(aSig, -expDiff, &aSig); + zExp = bExp; + } else { + if (aExp == 0xFF) { + return a; + } + if (aExp == 0) + return packFloat32(zSign, 0, (aSig + bSig) >> 6); + zSig = 0x40000000 + aSig + bSig; + zExp = aExp; + goto roundAndPack; + } + aSig |= 0x20000000; + zSig = (aSig + bSig) << 1; + --zExp; + if ((sbits32) zSig < 0) { + zSig = aSig + bSig; + ++zExp; + } + roundAndPack: + return roundAndPackFloat32(zSign, zExp, zSig); + +} + +float64 float64_sub(float64 a, float64 b) +{ + flag aSign, bSign; + + aSign = extractFloat64Sign(a); + bSign = extractFloat64Sign(b); + if (aSign == bSign) { + return subFloat64Sigs(a, b, aSign); + } else { + return addFloat64Sigs(a, b, aSign); + } + +} + +float32 float32_sub(float32 a, float32 b) +{ + flag aSign, bSign; + + aSign = extractFloat32Sign(a); + bSign = extractFloat32Sign(b); + if (aSign == bSign) { + return subFloat32Sigs(a, b, aSign); + } else { + return addFloat32Sigs(a, b, aSign); + } + +} + +float32 float32_add(float32 a, float32 b) +{ + flag aSign, bSign; + + aSign = extractFloat32Sign(a); + bSign = extractFloat32Sign(b); + if (aSign == bSign) { + return addFloat32Sigs(a, b, aSign); + } else { + return subFloat32Sigs(a, b, aSign); + } + +} + +float64 float64_add(float64 a, float64 b) +{ + flag aSign, bSign; + + aSign = extractFloat64Sign(a); + bSign = extractFloat64Sign(b); + if (aSign == bSign) { + return addFloat64Sigs(a, b, aSign); + } else { + return subFloat64Sigs(a, b, aSign); + } +} + +static void +normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros64(aSig) - 11; + *zSigPtr = aSig << shiftCount; + *zExpPtr = 1 - shiftCount; +} + +inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr) +{ + bits64 z1; + + z1 = a1 + b1; + *z1Ptr = z1; + *z0Ptr = a0 + b0 + (z1 < a1); +} + +inline void +sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr) +{ + *z1Ptr = a1 - b1; + *z0Ptr = a0 - b0 - (a1 < b1); +} + +static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b) +{ + bits64 b0, b1; + bits64 rem0, rem1, term0, term1; + bits64 z; + if (b <= a0) + return LIT64(0xFFFFFFFFFFFFFFFF); + b0 = b >> 32; + z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : (a0 / b0) << 32; + mul64To128(b, z, &term0, &term1); + sub128(a0, a1, term0, term1, &rem0, &rem1); + while (((sbits64) rem0) < 0) { + z -= LIT64(0x100000000); + b1 = b << 32; + add128(rem0, rem1, b0, b1, &rem0, &rem1); + } + rem0 = (rem0 << 32) | (rem1 >> 32); + z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : rem0 / b0; + return z; +} + +inline void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr) +{ + bits32 aHigh, aLow, bHigh, bLow; + bits64 z0, zMiddleA, zMiddleB, z1; + + aLow = a; + aHigh = a >> 32; + bLow = b; + bHigh = b >> 32; + z1 = ((bits64) aLow) * bLow; + zMiddleA = ((bits64) aLow) * bHigh; + zMiddleB = ((bits64) aHigh) * bLow; + z0 = ((bits64) aHigh) * bHigh; + zMiddleA += zMiddleB; + z0 += (((bits64) (zMiddleA < zMiddleB)) << 32) + (zMiddleA >> 32); + zMiddleA <<= 32; + z1 += zMiddleA; + z0 += (z1 < zMiddleA); + *z1Ptr = z1; + *z0Ptr = z0; + +} + +static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr, + bits32 * zSigPtr) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros32(aSig) - 8; + *zSigPtr = aSig << shiftCount; + *zExpPtr = 1 - shiftCount; + +} + +float64 float64_div(float64 a, float64 b) +{ + flag aSign, bSign, zSign; + int16 aExp, bExp, zExp; + bits64 aSig, bSig, zSig; + bits64 rem0, rem1; + bits64 term0, term1; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + aSign = extractFloat64Sign(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + bSign = extractFloat64Sign(b); + zSign = aSign ^ bSign; + if (aExp == 0x7FF) { + if (bExp == 0x7FF) { + } + return packFloat64(zSign, 0x7FF, 0); + } + if (bExp == 0x7FF) { + return packFloat64(zSign, 0, 0); + } + if (bExp == 0) { + if (bSig == 0) { + if ((aExp | aSig) == 0) { + float_raise(FPSCR_CAUSE_INVALID); + } + return packFloat64(zSign, 0x7FF, 0); + } + normalizeFloat64Subnormal(bSig, &bExp, &bSig); + } + if (aExp == 0) { + if (aSig == 0) + return packFloat64(zSign, 0, 0); + normalizeFloat64Subnormal(aSig, &aExp, &aSig); + } + zExp = aExp - bExp + 0x3FD; + aSig = (aSig | LIT64(0x0010000000000000)) << 10; + bSig = (bSig | LIT64(0x0010000000000000)) << 11; + if (bSig <= (aSig + aSig)) { + aSig >>= 1; + ++zExp; + } + zSig = estimateDiv128To64(aSig, 0, bSig); + if ((zSig & 0x1FF) <= 2) { + mul64To128(bSig, zSig, &term0, &term1); + sub128(aSig, 0, term0, term1, &rem0, &rem1); + while ((sbits64) rem0 < 0) { + --zSig; + add128(rem0, rem1, 0, bSig, &rem0, &rem1); + } + zSig |= (rem1 != 0); + } + return roundAndPackFloat64(zSign, zExp, zSig); + +} + +float32 float32_div(float32 a, float32 b) +{ + flag aSign, bSign, zSign; + int16 aExp, bExp, zExp; + bits32 aSig, bSig, zSig; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + aSign = extractFloat32Sign(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + bSign = extractFloat32Sign(b); + zSign = aSign ^ bSign; + if (aExp == 0xFF) { + if (bExp == 0xFF) { + } + return packFloat32(zSign, 0xFF, 0); + } + if (bExp == 0xFF) { + return packFloat32(zSign, 0, 0); + } + if (bExp == 0) { + if (bSig == 0) { + return packFloat32(zSign, 0xFF, 0); + } + normalizeFloat32Subnormal(bSig, &bExp, &bSig); + } + if (aExp == 0) { + if (aSig == 0) + return packFloat32(zSign, 0, 0); + normalizeFloat32Subnormal(aSig, &aExp, &aSig); + } + zExp = aExp - bExp + 0x7D; + aSig = (aSig | 0x00800000) << 7; + bSig = (bSig | 0x00800000) << 8; + if (bSig <= (aSig + aSig)) { + aSig >>= 1; + ++zExp; + } + zSig = (((bits64) aSig) << 32) / bSig; + if ((zSig & 0x3F) == 0) { + zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32); + } + return roundAndPackFloat32(zSign, zExp, zSig); + +} + +float32 float32_mul(float32 a, float32 b) +{ + char aSign, bSign, zSign; + int aExp, bExp, zExp; + unsigned int aSig, bSig; + unsigned long long zSig64; + unsigned int zSig; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + aSign = extractFloat32Sign(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + bSign = extractFloat32Sign(b); + zSign = aSign ^ bSign; + if (aExp == 0) { + if (aSig == 0) + return packFloat32(zSign, 0, 0); + normalizeFloat32Subnormal(aSig, &aExp, &aSig); + } + if (bExp == 0) { + if (bSig == 0) + return packFloat32(zSign, 0, 0); + normalizeFloat32Subnormal(bSig, &bExp, &bSig); + } + if ((bExp == 0xff && bSig == 0) || (aExp == 0xff && aSig == 0)) + return roundAndPackFloat32(zSign, 0xff, 0); + + zExp = aExp + bExp - 0x7F; + aSig = (aSig | 0x00800000) << 7; + bSig = (bSig | 0x00800000) << 8; + shift64RightJamming(((unsigned long long)aSig) * bSig, 32, &zSig64); + zSig = zSig64; + if (0 <= (signed int)(zSig << 1)) { + zSig <<= 1; + --zExp; + } + return roundAndPackFloat32(zSign, zExp, zSig); + +} + +float64 float64_mul(float64 a, float64 b) +{ + char aSign, bSign, zSign; + int aExp, bExp, zExp; + unsigned long long int aSig, bSig, zSig0, zSig1; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + aSign = extractFloat64Sign(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + bSign = extractFloat64Sign(b); + zSign = aSign ^ bSign; + + if (aExp == 0) { + if (aSig == 0) + return packFloat64(zSign, 0, 0); + normalizeFloat64Subnormal(aSig, &aExp, &aSig); + } + if (bExp == 0) { + if (bSig == 0) + return packFloat64(zSign, 0, 0); + normalizeFloat64Subnormal(bSig, &bExp, &bSig); + } + if ((aExp == 0x7ff && aSig == 0) || (bExp == 0x7ff && bSig == 0)) + return roundAndPackFloat64(zSign, 0x7ff, 0); + + zExp = aExp + bExp - 0x3FF; + aSig = (aSig | 0x0010000000000000LL) << 10; + bSig = (bSig | 0x0010000000000000LL) << 11; + mul64To128(aSig, bSig, &zSig0, &zSig1); + zSig0 |= (zSig1 != 0); + if (0 <= (signed long long int)(zSig0 << 1)) { + zSig0 <<= 1; + --zExp; + } + return roundAndPackFloat64(zSign, zExp, zSig0); +} diff --git a/include/asm-sh/cpu-sh4/fpu.h b/include/asm-sh/cpu-sh4/fpu.h new file mode 100644 index 00000000000..febef734252 --- /dev/null +++ b/include/asm-sh/cpu-sh4/fpu.h @@ -0,0 +1,32 @@ +/* + * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h + * + * Copyright (C) 2006 STMicroelectronics Limited + * Author: Carl Shaw + * + * May be copied or modified under the terms of the GNU General Public + * License Version 2. See linux/COPYING for more information. + * + * Definitions for SH4 FPU operations + */ + +#ifndef __CPU_SH4_FPU_H +#define __CPU_SH4_FPU_H + +#define FPSCR_ENABLE_MASK 0x00000f80UL + +#define FPSCR_FMOV_DOUBLE (1<<1) + +#define FPSCR_CAUSE_INEXACT (1<<12) +#define FPSCR_CAUSE_UNDERFLOW (1<<13) +#define FPSCR_CAUSE_OVERFLOW (1<<14) +#define FPSCR_CAUSE_DIVZERO (1<<15) +#define FPSCR_CAUSE_INVALID (1<<16) +#define FPSCR_CAUSE_ERROR (1<<17) + +#define FPSCR_DBL_PRECISION (1<<19) +#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3) +#define FPSCR_RM_NEAREST (0) +#define FPSCR_RM_ZERO (1) + +#endif -- cgit v1.2.3-70-g09d2 From cd01204b82933754a7276838656420477f64d4b8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Dec 2007 15:50:28 +0900 Subject: sh: Encode L1/L2 cache shape in auxvt. This adds in the L1I/L1D/L2 cache shape support to their respective entries in the ELF auxvt, based on the Alpha implementation. We use this on the userspace libc side for calculating a tightly packed SHMLBA amongst other things. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/init.c | 29 ++++++++++++++++++++++++++++- arch/sh/kernel/setup.c | 3 +++ include/asm-sh/auxvec.h | 12 ++++++++++++ include/asm-sh/elf.h | 19 ++++++++++++++++--- include/asm-sh/system.h | 2 +- 5 files changed, 60 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 0f0c76a842e..80a31329ead 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -20,6 +21,7 @@ #include #include #include +#include #include #include #ifdef CONFIG_SUPERH32 @@ -151,6 +153,27 @@ static void __uses_jump_to_uncached cache_init(void) #define cache_init() do { } while (0) #endif +#define CSHAPE(totalsize, linesize, assoc) \ + ((totalsize & ~0xff) | (linesize << 4) | assoc) + +#define CACHE_DESC_SHAPE(desc) \ + CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways) + +static void detect_cache_shape(void) +{ + l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache); + + if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED) + l1i_cache_shape = l1d_cache_shape; + else + l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache); + + if (current_cpu_data.flags & CPU_HAS_L2_CACHE) + l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache); + else + l2_cache_shape = -1; /* No S-cache */ +} + #ifdef CONFIG_SH_DSP static void __init release_dsp(void) { @@ -237,11 +260,15 @@ asmlinkage void __cpuinit sh_cpu_init(void) /* Init the cache */ cache_init(); - if (raw_smp_processor_id() == 0) + if (raw_smp_processor_id() == 0) { shm_align_mask = max_t(unsigned long, current_cpu_data.dcache.way_size - 1, PAGE_SIZE - 1); + /* Boot CPU sets the cache shape */ + detect_cache_shape(); + } + /* Disable the FPU */ if (fpu_disabled) { printk("FPU Disabled\n"); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index f48ce8e5d0a..9c105c827e8 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -78,6 +79,8 @@ EXPORT_SYMBOL(memory_start); unsigned long memory_end = 0; EXPORT_SYMBOL(memory_end); +int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; + static int __init early_parse_mem(char *p) { unsigned long size; diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h index 1b6916e63e9..4069858f813 100644 --- a/include/asm-sh/auxvec.h +++ b/include/asm-sh/auxvec.h @@ -15,4 +15,16 @@ #define AT_SYSINFO_EHDR 33 #endif +/* + * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + * value is -1, then the cache doesn't exist. Otherwise: + * + * bit 0-3: Cache set-associativity; 0 means fully associative. + * bit 4-7: Log2 of cacheline size. + * bit 8-31: Size of the entire cache >> 8. + */ +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 + #endif /* __ASM_SH_AUXVEC_H */ diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 5a1e920f059..61960408e6e 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -161,12 +161,25 @@ extern void __kernel_vsyscall; #define VDSO_BASE ((unsigned long)current->mm->context.vdso) #define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) +#define VSYSCALL_AUX_ENT \ + if (vdso_enabled) \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); +#else +#define VSYSCALL_AUX_ENT +#endif /* CONFIG_VSYSCALL */ + +extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; + /* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ #define ARCH_DLINFO \ do { \ - if (vdso_enabled) \ - NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \ + /* Optional vsyscall entry */ \ + VSYSCALL_AUX_ENT \ + \ + /* Cache desc */ \ + NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ + NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \ + NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ } while (0) -#endif /* CONFIG_VSYSCALL */ #endif /* __ASM_SH_ELF_H */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 9bda8d063ec..84592555ba2 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -12,7 +12,7 @@ #include #include -#define AT_VECTOR_SIZE_ARCH 1 /* entries in ARCH_DLINFO */ +#define AT_VECTOR_SIZE_ARCH 4 /* entries in ARCH_DLINFO */ #if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) #define __icbi() \ -- cgit v1.2.3-70-g09d2 From a9f1365e5e4963705f85a6381cbed74c5615dbac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Dec 2007 16:06:32 +0900 Subject: sh: Use utsname()->machine for ELF_PLATFORM. Signed-off-by: Paul Mundt --- include/asm-sh/elf.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 61960408e6e..9a95f8cb2e1 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -62,11 +62,6 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; typedef struct user_fpu_struct elf_fpregset_t; -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ( (x)->e_machine == EM_SH ) - /* * These are used to set parameters in the core dumps. */ @@ -78,6 +73,12 @@ typedef struct user_fpu_struct elf_fpregset_t; #endif #define ELF_ARCH EM_SH +#ifdef __KERNEL__ +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ( (x)->e_machine == EM_SH ) + #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE PAGE_SIZE @@ -106,7 +107,7 @@ typedef struct user_fpu_struct elf_fpregset_t; For the moment, we have only optimizations for the Intel generations, but that could change... */ -#define ELF_PLATFORM (NULL) +#define ELF_PLATFORM (utsname()->machine) #ifdef __SH5__ #define ELF_PLAT_INIT(_r, load_addr) \ @@ -182,4 +183,5 @@ do { \ NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ } while (0) +#endif /* __KERNEL__ */ #endif /* __ASM_SH_ELF_H */ -- cgit v1.2.3-70-g09d2 From 98c4ecde9da14fafbcf1b6c025b08342a327e644 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Dec 2007 16:21:57 +0900 Subject: sh: Provide the FPSCR init through AT_FPUCW. Signed-off-by: Paul Mundt --- include/asm-sh/auxvec.h | 6 ++++++ include/asm-sh/elf.h | 11 ++++++++++- include/asm-sh/system.h | 2 +- 3 files changed, 17 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/asm-sh/auxvec.h b/include/asm-sh/auxvec.h index 4069858f813..a6b9d4f4859 100644 --- a/include/asm-sh/auxvec.h +++ b/include/asm-sh/auxvec.h @@ -6,6 +6,12 @@ * for more of them. */ +/* + * This entry gives some information about the FPU initialization + * performed by the kernel. + */ +#define AT_FPUCW 18 /* Used FPU control word. */ + #ifdef CONFIG_VSYSCALL /* * Only define this in the vsyscall case, the entry point to diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 9a95f8cb2e1..e00a58cb476 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -169,13 +169,22 @@ extern void __kernel_vsyscall; #define VSYSCALL_AUX_ENT #endif /* CONFIG_VSYSCALL */ +#ifdef CONFIG_SH_FPU +#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) +#else +#define FPU_AUX_ENT +#endif + extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; /* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ #define ARCH_DLINFO \ do { \ + /* Optional FPU initialization */ \ + FPU_AUX_ENT; \ + \ /* Optional vsyscall entry */ \ - VSYSCALL_AUX_ENT \ + VSYSCALL_AUX_ENT; \ \ /* Cache desc */ \ NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 84592555ba2..772cd1a0a67 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -12,7 +12,7 @@ #include #include -#define AT_VECTOR_SIZE_ARCH 4 /* entries in ARCH_DLINFO */ +#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ #if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) #define __icbi() \ -- cgit v1.2.3-70-g09d2 From 543d5afe5b425ef25a865656bfb76083515dc1cf Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Dec 2007 16:33:32 +0900 Subject: sh: Kill off superfluous __KERNEL__ check in asm/elf.h. Signed-off-by: Paul Mundt --- include/asm-sh/elf.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index e00a58cb476..05092da1aa5 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -89,7 +89,6 @@ typedef struct user_fpu_struct elf_fpregset_t; #define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) - #define ELF_CORE_COPY_REGS(_dest,_regs) \ memcpy((char *) &_dest, (char *) _regs, \ sizeof(struct pt_regs)); @@ -139,7 +138,6 @@ typedef struct user_fpu_struct elf_fpregset_t; _r->sr = SR_FD; } while (0) #endif -#ifdef __KERNEL__ #define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) struct task_struct; extern int dump_task_regs (struct task_struct *, elf_gregset_t *); @@ -147,7 +145,6 @@ extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) -#endif #ifdef CONFIG_VSYSCALL /* vDSO has arch_setup_additional_pages */ -- cgit v1.2.3-70-g09d2 From 9acb98fb7ce948063a2269b4f8db83d6bef7e2b0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 17 Dec 2007 10:52:11 +0900 Subject: sh: Stub in page_table_range_init() on nommu. Signed-off-by: Paul Mundt --- arch/sh/mm/tlb-nommu.c | 6 ++++++ include/asm-sh/pgtable.h | 2 ++ 2 files changed, 8 insertions(+) (limited to 'include') diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c index 1ccca7c0532..8842620604c 100644 --- a/arch/sh/mm/tlb-nommu.c +++ b/arch/sh/mm/tlb-nommu.c @@ -9,6 +9,7 @@ */ #include #include +#include /* * Nothing too terribly exciting here .. @@ -49,3 +50,8 @@ void update_mmu_cache(struct vm_area_struct * vma, { BUG(); } + +void __init page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd_base) +{ +} diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 3df90f003e9..a4a8f8b9346 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -144,6 +144,8 @@ extern void update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte); extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; extern void paging_init(void); +extern void page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd); #include -- cgit v1.2.3-70-g09d2 From 830626caf8570675a15bcc9ec46fcb5bfbc71b0d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 17 Dec 2007 10:52:37 +0900 Subject: sh: Fix up switch_to() type casts. Signed-off-by: Paul Mundt --- include/asm-sh/system_32.h | 94 +++++++++++++++++++++++----------------------- 1 file changed, 47 insertions(+), 47 deletions(-) (limited to 'include') diff --git a/include/asm-sh/system_32.h b/include/asm-sh/system_32.h index e918bacd5ec..7ff08d956ba 100644 --- a/include/asm-sh/system_32.h +++ b/include/asm-sh/system_32.h @@ -9,53 +9,53 @@ struct task_struct *__switch_to(struct task_struct *prev, /* * switch_to() should switch tasks to task nr n, first */ -#define switch_to(prev, next, last) \ -do { \ - register u32 *__ts1 __asm__ ("r1") = &prev->thread.sp; \ - register u32 *__ts2 __asm__ ("r2") = &prev->thread.pc; \ - register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ - register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ - register u32 *__ts6 __asm__ ("r6") = &next->thread.sp; \ - register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ - struct task_struct *__last; \ - \ - __asm__ __volatile__ ( \ - ".balign 4\n\t" \ - "stc.l gbr, @-r15\n\t" \ - "sts.l pr, @-r15\n\t" \ - "mov.l r8, @-r15\n\t" \ - "mov.l r9, @-r15\n\t" \ - "mov.l r10, @-r15\n\t" \ - "mov.l r11, @-r15\n\t" \ - "mov.l r12, @-r15\n\t" \ - "mov.l r13, @-r15\n\t" \ - "mov.l r14, @-r15\n\t" \ - "mov.l r15, @r1\t! save SP\n\t" \ - "mov.l @r6, r15\t! change to new stack\n\t" \ - "mova 1f, %0\n\t" \ - "mov.l %0, @r2\t! save PC\n\t" \ - "mov.l 2f, %0\n\t" \ - "jmp @%0\t! call __switch_to\n\t" \ - " lds r7, pr\t! with return to new PC\n\t" \ - ".balign 4\n" \ - "2:\n\t" \ - ".long __switch_to\n" \ - "1:\n\t" \ - "mov.l @r15+, r14\n\t" \ - "mov.l @r15+, r13\n\t" \ - "mov.l @r15+, r12\n\t" \ - "mov.l @r15+, r11\n\t" \ - "mov.l @r15+, r10\n\t" \ - "mov.l @r15+, r9\n\t" \ - "mov.l @r15+, r8\n\t" \ - "lds.l @r15+, pr\n\t" \ - "ldc.l @r15+, gbr\n\t" \ - : "=z" (__last) \ - : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ - "r" (__ts5), "r" (__ts6), "r" (__ts7) \ - : "r3", "t"); \ - \ - last = __last; \ +#define switch_to(prev, next, last) \ +do { \ + register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp; \ + register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc; \ + register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ + register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ + register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp; \ + register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ + struct task_struct *__last; \ + \ + __asm__ __volatile__ ( \ + ".balign 4\n\t" \ + "stc.l gbr, @-r15\n\t" \ + "sts.l pr, @-r15\n\t" \ + "mov.l r8, @-r15\n\t" \ + "mov.l r9, @-r15\n\t" \ + "mov.l r10, @-r15\n\t" \ + "mov.l r11, @-r15\n\t" \ + "mov.l r12, @-r15\n\t" \ + "mov.l r13, @-r15\n\t" \ + "mov.l r14, @-r15\n\t" \ + "mov.l r15, @r1\t! save SP\n\t" \ + "mov.l @r6, r15\t! change to new stack\n\t" \ + "mova 1f, %0\n\t" \ + "mov.l %0, @r2\t! save PC\n\t" \ + "mov.l 2f, %0\n\t" \ + "jmp @%0\t! call __switch_to\n\t" \ + " lds r7, pr\t! with return to new PC\n\t" \ + ".balign 4\n" \ + "2:\n\t" \ + ".long __switch_to\n" \ + "1:\n\t" \ + "mov.l @r15+, r14\n\t" \ + "mov.l @r15+, r13\n\t" \ + "mov.l @r15+, r12\n\t" \ + "mov.l @r15+, r11\n\t" \ + "mov.l @r15+, r10\n\t" \ + "mov.l @r15+, r9\n\t" \ + "mov.l @r15+, r8\n\t" \ + "lds.l @r15+, pr\n\t" \ + "ldc.l @r15+, gbr\n\t" \ + : "=z" (__last) \ + : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ + "r" (__ts5), "r" (__ts6), "r" (__ts7) \ + : "r3", "t"); \ + \ + last = __last; \ } while (0) #define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) -- cgit v1.2.3-70-g09d2 From e06712df7792165d12392bc1fdda6bf384e1313b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 17 Dec 2007 15:59:38 +0900 Subject: sh: Kill off pgtable.h from scatterlist.h. Fixes up the mmc build. Signed-off-by: Paul Mundt --- include/asm-sh/scatterlist.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/scatterlist.h b/include/asm-sh/scatterlist.h index 35ef9c30f0d..2084d037369 100644 --- a/include/asm-sh/scatterlist.h +++ b/include/asm-sh/scatterlist.h @@ -1,7 +1,6 @@ #ifndef __ASM_SH_SCATTERLIST_H #define __ASM_SH_SCATTERLIST_H -#include #include struct scatterlist { -- cgit v1.2.3-70-g09d2 From 003c6af6c6370cc3315ab828a0e6618f00713d96 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 17 Dec 2007 16:00:25 +0900 Subject: sh: Fix up binfmt_flat compile warnings. Signed-off-by: Paul Mundt --- include/asm-sh/flat.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-sh/flat.h b/include/asm-sh/flat.h index dc4f5950daf..0cc800299e0 100644 --- a/include/asm-sh/flat.h +++ b/include/asm-sh/flat.h @@ -19,6 +19,6 @@ #define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) -#define flat_set_persistent(relval, p) 0 +#define flat_set_persistent(relval, p) ({ (void)p; 0; }) #endif /* __ASM_SH_FLAT_H */ -- cgit v1.2.3-70-g09d2 From 0095d58b4a91b9fb57aeb781909355b232517c64 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 18 Dec 2007 09:40:33 +0900 Subject: sh: include/asm-sh/: Spelling fixes. Signed-off-by: Joe Perches Signed-off-by: Paul Mundt --- include/asm-sh/hd64461.h | 28 ++++++++++++++-------------- include/asm-sh/microdev.h | 4 ++-- include/asm-sh/voyagergx.h | 2 +- 3 files changed, 17 insertions(+), 17 deletions(-) (limited to 'include') diff --git a/include/asm-sh/hd64461.h b/include/asm-sh/hd64461.h index 342ca55a266..8c1353baf00 100644 --- a/include/asm-sh/hd64461.h +++ b/include/asm-sh/hd64461.h @@ -46,10 +46,10 @@ /* CPU Data Bus Control Register */ #define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) -/* Base Adress Register */ +/* Base Address Register */ #define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) -/* Line increment adress */ +/* Line increment address */ #define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) /* Controls LCD controller */ @@ -80,9 +80,9 @@ #define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) /* Palette Registers */ -#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Adress Register */ +#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ #define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ -#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Adress Register */ +#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ #define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ #define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ @@ -97,8 +97,8 @@ #define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ /* Line Drawing Registers */ -#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Adress Register (H) */ -#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Adress Register (L) */ +#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ +#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ #define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ #define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ #define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ @@ -106,16 +106,16 @@ #define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ /* BitBLT Registers */ -#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Adress Register (H) */ -#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Adress Register (L) */ -#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Adress Register (H) */ -#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Adress Register (L) */ +#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ +#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ +#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ +#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ #define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ #define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ -#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Adress Register (H) */ -#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Adress Register (L) */ -#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Adress Register (H) */ -#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Adress Register (L) */ +#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ +#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ +#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ +#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ #define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ #define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ diff --git a/include/asm-sh/microdev.h b/include/asm-sh/microdev.h index 018332a9e59..1aed15856e1 100644 --- a/include/asm-sh/microdev.h +++ b/include/asm-sh/microdev.h @@ -17,7 +17,7 @@ extern void microdev_print_fpga_intc_status(void); /* * The following are useful macros for manipulating the interrupt * controller (INTC) on the CPU-board FPGA. should be noted that there - * is an INTC on the FPGA, and a seperate INTC on the SH4-202 core - + * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - * these are two different things, both of which need to be prorammed to * correctly route - unfortunately, they have the same name and * abbreviations! @@ -25,7 +25,7 @@ extern void microdev_print_fpga_intc_status(void); #define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ #define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ #define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ -#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interupt mask to enable/disable INTC in CPU-board FPGA */ +#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ #define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ #define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ #define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h index d825596562d..45b4547c74a 100644 --- a/include/asm-sh/voyagergx.h +++ b/include/asm-sh/voyagergx.h @@ -213,7 +213,7 @@ /* ----- Power mode 1 clock register -------------------------- */ #define POWER_MODE1_CLOCK (0x00004C + VOYAGER_BASE) -/* ----- Power mode controll register ------------------------- */ +/* ----- Power mode control register ------------------------- */ #define POWER_MODE_CTRL (0x000054 + VOYAGER_BASE) /* ----- Miscellaneous Timing register ------------------------ */ -- cgit v1.2.3-70-g09d2 From 7bff489a1496d363e9a640c00eb8970da15079dd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 18 Dec 2007 09:43:15 +0900 Subject: sh: Always use CONFIG_HZ for HZ. Currently the wdt forces HZ=1000 and sidesteps CONFIG_HZ completely. This is a remnant from when HZ was hardcoded and before CONFIG_HZ was introduced. Additionally, not all of the timers have this requirement these days, so it's also an artificial limitation. Just kill it off and use CONFIG_HZ directly. Reported-by: H. Peter Anvin Signed-off-by: Paul Mundt --- include/asm-sh/param.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include') diff --git a/include/asm-sh/param.h b/include/asm-sh/param.h index 1012296e07a..ae245afdfd6 100644 --- a/include/asm-sh/param.h +++ b/include/asm-sh/param.h @@ -2,11 +2,7 @@ #define __ASM_SH_PARAM_H #ifdef __KERNEL__ -# ifdef CONFIG_SH_WDT -# define HZ 1000 /* Needed for high-res WOVF */ -# else -# define HZ CONFIG_HZ -# endif +# define HZ CONFIG_HZ # define USER_HZ 100 /* User interfaces are in "ticks" */ # define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ #endif -- cgit v1.2.3-70-g09d2 From 31a49c4bf8f964b7a9897baa889916d71b51d9c1 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 26 Dec 2007 11:45:06 +0900 Subject: sh: Add support for SH7721 CPU subtype. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 +++++++ arch/sh/Kconfig.debug | 2 +- arch/sh/drivers/dma/Kconfig | 2 +- arch/sh/drivers/dma/dma-sh.c | 2 ++ arch/sh/kernel/cpu/sh3/Makefile | 1 + arch/sh/kernel/cpu/sh3/probe.c | 3 +++ arch/sh/kernel/cpu/sh3/setup-sh7720.c | 11 +++++++++-- arch/sh/kernel/early_printk.c | 12 ++++++++---- arch/sh/kernel/setup.c | 8 ++++---- arch/sh/kernel/timers/timer-tmu.c | 1 + drivers/serial/sh-sci.c | 2 +- drivers/serial/sh-sci.h | 21 ++++++++++++++------- include/asm-sh/cpu-sh3/cache.h | 3 ++- include/asm-sh/cpu-sh3/dma.h | 4 +++- include/asm-sh/cpu-sh3/gpio.h | 3 ++- include/asm-sh/cpu-sh3/mmu_context.h | 3 ++- include/asm-sh/cpu-sh3/timer.h | 7 ++++--- include/asm-sh/cpu-sh3/ubc.h | 3 ++- include/asm-sh/processor.h | 2 +- 19 files changed, 68 insertions(+), 29 deletions(-) (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 538631ca10a..d2f55771948 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -214,6 +214,13 @@ config CPU_SUBTYPE_SH7720 help Select SH7720 if you have a SH3-DSP SH7720 CPU. +config CPU_SUBTYPE_SH7721 + bool "Support SH7721 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7721 if you have a SH3-DSP SH7721 CPU. + # SH-4 Processor Support config CPU_SUBTYPE_SH7750 diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 2881d8471a1..dde00d5c247 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -35,7 +35,7 @@ config EARLY_SCIF_CONSOLE_PORT default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 - default "0xa4430000" if CPU_SUBTYPE_SH7720 + default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe80000" if CPU_SH4 default "0x00000000" diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 4e711a0c3da..01936368b8b 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -12,7 +12,7 @@ config SH_DMA config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA - default "6" if CPU_SUBTYPE_SH7720 + default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R default "12" if CPU_SUBTYPE_SH7780 default "4" diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 958bac1c585..5c3359756a9 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -25,6 +25,7 @@ static int dmte_irq_map[] = { DMTE2_IRQ, DMTE3_IRQ, #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) || \ @@ -203,6 +204,7 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan) } #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define dmaor_read_reg() ctrl_inw(DMAOR) #define dmaor_write_reg(data) ctrl_outw(data, DMAOR) diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 646eb693361..1afd05e62d1 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o +obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index 22070e43e34..fcc80bb7bee 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -84,6 +84,9 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void) #if defined(CONFIG_CPU_SUBTYPE_SH7720) boot_cpu_data.type = CPU_SH7720; #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7721) + boot_cpu_data.type = CPU_SH7721; +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) boot_cpu_data.type = CPU_SH7705; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index a0929b8a95a..00facd028a0 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -127,8 +127,11 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800), INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840), INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900), - INTC_VECT(SSL, 0x980), INTC_VECT(USBFI0, 0xa20), - INTC_VECT(USBFI1, 0xa40), INTC_VECT(USBHI, 0xa60), +#if defined(CONFIG_CPU_SUBTYPE_SH7720) + INTC_VECT(SSL, 0x980), +#endif + INTC_VECT(USBFI0, 0xa20), INTC_VECT(USBFI1, 0xa40), + INTC_VECT(USBHI, 0xa60), INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0), INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80), @@ -168,7 +171,11 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } }, +#if defined(CONFIG_CPU_SUBTYPE_SH7720) { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } }, +#else + { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } }, +#endif { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } }, { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } }, { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } }, diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 2f30977558a..957f2561154 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -63,7 +63,8 @@ static struct console bios_console = { #include #include "../../../drivers/serial/sh-sci.h" -#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define EPK_SCSMR_VALUE 0x000 #define EPK_SCBRR_VALUE 0x00C #define EPK_FIFO_SIZE 64 @@ -117,7 +118,8 @@ static struct console scif_console = { }; #if !defined(CONFIG_SH_STANDARD_BIOS) -#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) static void scif_sercon_init(char *s) { sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */ @@ -208,9 +210,11 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \ - !defined(CONFIG_SH_STANDARD_BIOS) +#if !defined(CONFIG_SH_STANDARD_BIOS) +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) scif_sercon_init(buf + 6); +#endif #endif } #endif diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 9c105c827e8..48cd576754b 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -314,10 +314,10 @@ static const char *cpu_name[] = { [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", - [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", - [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", - [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", - [CPU_SH7760] = "SH7760", + [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729", + [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", + [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", + [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 628ec9a15e3..8935570008d 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -174,6 +174,7 @@ static int tmu_timer_init(void) tmu_timer_stop(); #if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7721) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 73440e26834..6fbfd140b7e 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -302,7 +302,7 @@ static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) } sci_out(port, SCFCR, fcr_val); } -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) { unsigned int fcr_val = 0; diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 0187dccfe8c..85562040a6d 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -46,7 +46,8 @@ */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCIF_ONLY #define SCIF_ORER 0x0200 /* overrun error bit */ @@ -216,7 +217,8 @@ #define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define SCIF_ORER 0x0200 #define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) #define SCIF_RFDC_MASK 0x007f @@ -254,7 +256,8 @@ # define SCxSR_PER(port) SCIF_PER # define SCxSR_BRK(port) SCIF_BRK #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) # define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) # define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) @@ -363,7 +366,8 @@ #define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -390,7 +394,8 @@ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) @@ -512,7 +517,8 @@ static inline void set_sh771x_scif_pfc(struct uart_port *port) return; } } -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) static inline int sci_rxd_in(struct uart_port *port) { if (port->mapbase == 0xa4430000) @@ -696,7 +702,8 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1) diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h index 77dd45d8241..56bd838b7db 100644 --- a/include/asm-sh/cpu-sh3/cache.h +++ b/include/asm-sh/cpu-sh3/cache.h @@ -33,7 +33,8 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define CCR3 0xa40000b4 #define CCR_CACHE_16KB 0x00010000 #define CCR_CACHE_32KB 0x00020000 diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h index 54bfece328c..092ff9d872c 100644 --- a/include/asm-sh/cpu-sh3/dma.h +++ b/include/asm-sh/cpu-sh3/dma.h @@ -2,7 +2,9 @@ #define __ASM_CPU_SH3_DMA_H -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) #define SH_DMAC_BASE 0xa4010020 #define DMTE0_IRQ 48 diff --git a/include/asm-sh/cpu-sh3/gpio.h b/include/asm-sh/cpu-sh3/gpio.h index 48770c1c7bd..4e53eb314b8 100644 --- a/include/asm-sh/cpu-sh3/gpio.h +++ b/include/asm-sh/cpu-sh3/gpio.h @@ -12,7 +12,8 @@ #ifndef _CPU_SH3_GPIO_H #define _CPU_SH3_GPIO_H -#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) /* Control registers */ #define PORT_PACR 0xA4050100UL diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h index 16c2d63b7e3..ab09da73ce7 100644 --- a/include/asm-sh/cpu-sh3/mmu_context.h +++ b/include/asm-sh/cpu-sh3/mmu_context.h @@ -33,7 +33,8 @@ defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7710) || \ defined(CONFIG_CPU_SUBTYPE_SH7712) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ #else #define INTEVT 0xffffffd8 diff --git a/include/asm-sh/cpu-sh3/timer.h b/include/asm-sh/cpu-sh3/timer.h index 7b795ac5477..793acf12aa0 100644 --- a/include/asm-sh/cpu-sh3/timer.h +++ b/include/asm-sh/cpu-sh3/timer.h @@ -23,12 +23,13 @@ * --------------------------------------------------------------------------- */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) #define TMU_TOCR 0xfffffe90 /* Byte access */ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define TMU_012_TSTR 0xa412fe92 /* Byte access */ #define TMU0_TCOR 0xa412fe94 /* Long access */ @@ -57,7 +58,7 @@ #define TMU2_TCOR 0xfffffeac /* Long access */ #define TMU2_TCNT 0xfffffeb0 /* Long access */ #define TMU2_TCR 0xfffffeb4 /* Word access */ -#if !defined(CONFIG_CPU_SUBTYPE_SH7720) +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) #define TMU2_TCPR2 0xfffffeb8 /* Long access */ #endif #endif diff --git a/include/asm-sh/cpu-sh3/ubc.h b/include/asm-sh/cpu-sh3/ubc.h index 18467c57453..4e6381d5ff7 100644 --- a/include/asm-sh/cpu-sh3/ubc.h +++ b/include/asm-sh/cpu-sh3/ubc.h @@ -12,7 +12,8 @@ #define __ASM_CPU_SH3_UBC_H #if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define UBC_BARA 0xa4ffffb0 #define UBC_BAMRA 0xa4ffffb4 #define UBC_BBRA 0xa4ffffb8 diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index bbbdaab8de5..f4a8da71ba4 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -23,7 +23,7 @@ enum cpu_type { CPU_SH7705, CPU_SH7706, CPU_SH7707, CPU_SH7708, CPU_SH7708S, CPU_SH7708R, CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, - CPU_SH7720, CPU_SH7729, + CPU_SH7720, CPU_SH7721, CPU_SH7729, /* SH-4 types */ CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, -- cgit v1.2.3-70-g09d2 From 0465b9fb5f6b57f00a6f5bf2169e30e8f3c7d66c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 26 Dec 2007 18:37:16 +0900 Subject: sh: Fix get_user()/put_user() build error. Fixes the build error caused by -Werror on gcc 3.x compilers: arch/sh/kernel/signal_32.c: In function `sys_sigaction': arch/sh/kernel/signal_32.c:66: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:67: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:69: warning: initialization discards qualifiers from pointer target type arch/sh/kernel/signal_32.c:70: warning: initialization discards qualifiers from pointer target type The mismatch in question was introduced by commit-id 9c5a4eec79b3eb8876d2e7fddfa1e040a7650e55. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_32.h | 64 ++++++++++++++++++++------------------------- 1 file changed, 28 insertions(+), 36 deletions(-) (limited to 'include') diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 59a9f20c2dc..b6082f3c1dc 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -95,11 +95,9 @@ static inline int __access_ok(unsigned long addr, unsigned long size) } #endif /* CONFIG_MMU */ -static inline int access_ok(int type, const void __user *p, unsigned long size) -{ - unsigned long addr = (unsigned long)p; - return __access_ok(addr, size); -} +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) /* * Uh, these should become the main single-value transfer routines ... @@ -113,18 +111,16 @@ static inline int access_ok(int type, const void __user *p, unsigned long size) * (a) re-use the arguments for side effects (sizeof is ok) * (b) require any knowledge of processes at this stage */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) /* * The "__xxx" versions do not do address space checking, useful when * doing multiple accesses to the same area (the user has to do the * checks by hand with "access_ok()") */ -#define __put_user(x,ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) \ - __get_user_nocheck((x),(ptr),sizeof(*(ptr))) +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) struct __large_struct { unsigned long buf[100]; }; #define __m(x) (*(struct __large_struct __user *)(x)) @@ -132,7 +128,6 @@ struct __large_struct { unsigned long buf[100]; }; #define __get_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ - __chk_user_ptr(ptr); \ switch (size) { \ case 1: \ __get_user_asm(x, ptr, retval, "b"); \ @@ -151,24 +146,22 @@ do { \ #define __get_user_nocheck(x,ptr,size) \ ({ \ - long __gu_err, __gu_val; \ - __typeof__(*(ptr)) *__pu_addr = (ptr); \ - __get_user_size(__gu_val, (__pu_addr), (size), __gu_err); \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ (x) = (__typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) #define __get_user_check(x,ptr,size) \ ({ \ - long __gu_err, __gu_val; \ - __typeof__(*(ptr)) *__pu_addr = (ptr); \ - __chk_user_ptr(__pu_addr); \ - if (likely(__addr_ok((unsigned long)(__pu_addr)))) { \ - __get_user_size(__gu_val, (__pu_addr), (size), __gu_err);\ - } else { \ - __gu_err = -EFAULT; \ - __gu_val = 0; \ - } \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ (x) = (__typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) @@ -199,7 +192,6 @@ extern void __get_user_unknown(void); #define __put_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ - __chk_user_ptr(ptr); \ switch (size) { \ case 1: \ __put_user_asm(x, ptr, retval, "b"); \ @@ -218,22 +210,22 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __put_user_size((x),(ptr),(size),__pu_err); \ - __pu_err; \ +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ }) #define __put_user_check(x,ptr,size) \ ({ \ - long __pu_err; \ + long __pu_err = -EFAULT; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - \ - if (likely(__addr_ok((unsigned long)__pu_addr))) \ - __put_user_size((x),__pu_addr,(size),__pu_err); \ - else \ - __pu_err = -EFAULT; \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size((x), __pu_addr, (size), \ + __pu_err); \ __pu_err; \ }) -- cgit v1.2.3-70-g09d2 From 7d740a066fb9c6681c2898c7977209725c9e552f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 7 Jan 2008 14:40:07 +0900 Subject: sh: Add support for SH7763 CPU subtype. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 9 +- arch/sh/Kconfig.debug | 2 +- arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/pci-sh4.h | 4 +- arch/sh/drivers/pci/pci-sh7780.c | 1 + arch/sh/drivers/pci/pci-sh7780.h | 1 + arch/sh/kernel/cpu/sh4/probe.c | 2 + arch/sh/kernel/cpu/sh4a/Makefile | 2 + arch/sh/kernel/cpu/sh4a/clock-sh7763.c | 126 +++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 390 +++++++++++++++++++++++++++++++++ arch/sh/kernel/setup.c | 8 +- drivers/serial/sh-sci.c | 4 +- drivers/serial/sh-sci.h | 19 +- include/asm-sh/bugs.h | 2 +- include/asm-sh/cpu-sh4/freq.h | 3 +- include/asm-sh/processor.h | 2 +- 16 files changed, 564 insertions(+), 12 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7763.c create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7763.c (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d2f55771948..ddbd610d27e 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -265,6 +265,12 @@ config CPU_SUBTYPE_SH4_202 # SH-4A Processor Support +config CPU_SUBTYPE_SH7763 + bool "Support SH7763 processor" + select CPU_SH4A + help + Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. + config CPU_SUBTYPE_SH7770 bool "Support SH7770 processor" select CPU_SH4A @@ -551,7 +557,8 @@ config SH_MTU2 config SH_TIMER_IRQ int - default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ + CPU_SUBTYPE_SH7763 default "86" if CPU_SUBTYPE_SH7619 default "140" if CPU_SUBTYPE_SH7206 default "16" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index dde00d5c247..f7c716166ce 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -29,7 +29,7 @@ config EARLY_SCIF_CONSOLE config EARLY_SCIF_CONSOLE_PORT hex depends on EARLY_SCIF_CONSOLE - default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 172e81db953..1086cf111f8 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_AUTO) += pci-auto.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o +obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 1901c33cde6..4925c79ea95 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -1,7 +1,9 @@ #ifndef __PCI_SH4_H #define __PCI_SH4_H -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) #include "pci-sh7780.h" #else #include "pci-sh7751.h" diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index e516087fb43..7d797f4de5e 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -58,6 +58,7 @@ static int __init sh7780_pci_init(void) id = pci_read_reg(SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { + case SH7763_DEVICE_ID: case SH7780_DEVICE_ID: case SH7781_DEVICE_ID: case SH7785_DEVICE_ID: diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 1d069a859de..97b2c98f05c 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -16,6 +16,7 @@ #define SH7780_VENDOR_ID 0x1912 #define SH7781_DEVICE_ID 0x0001 #define SH7780_DEVICE_ID 0x0002 +#define SH7763_DEVICE_ID 0x0004 #define SH7785_DEVICE_ID 0x0007 /* SH7780 Control Registers */ diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index bc9c28a69bf..f2b9238cda0 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -98,6 +98,8 @@ int __init detect_cpu_and_cache_system(void) case 0x200A: if (prr == 0x61) boot_cpu_data.type = CPU_SH7781; + else if (prr == 0xa1) + boot_cpu_data.type = CPU_SH7763; else boot_cpu_data.type = CPU_SH7780; diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 24539873943..08ac6387bf1 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -3,6 +3,7 @@ # # CPU subtype setup +obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o @@ -14,6 +15,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o # Primary on-chip clocks (common) +clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c new file mode 100644 index 00000000000..45889d412c8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c @@ -0,0 +1,126 @@ +/* + * arch/sh/kernel/cpu/sh4a/clock-sh7763.c + * + * SH7763 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * Copyright (C) 2007 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 }; +static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 }; +static int p1fc_divisors[] = { 1, 1, 1, 16, 1, 1, 1, 1 }; +static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= p0fc_divisors[(ctrl_inl(FRQCR) >> 4) & 0x07]; +} + +static struct clk_ops sh7763_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07); + clk->rate = clk->parent->rate / p0fc_divisors[idx]; +} + +static struct clk_ops sh7763_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7763_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk_ops sh7763_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7763_clk_ops[] = { + &sh7763_master_clk_ops, + &sh7763_module_clk_ops, + &sh7763_bus_clk_ops, + &sh7763_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7763_clk_ops)) + *ops = sh7763_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07); + clk->rate = clk->parent->rate / cfc_divisors[idx]; +} + +static struct clk_ops sh7763_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk sh7763_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7763_shyway_clk_ops, +}; + +/* + * Additional SH7763-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *sh7763_onchip_clocks[] = { + &sh7763_shyway_clk, +}; + +static int __init sh7763_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) { + struct clk *clkp = sh7763_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} + +arch_initcall(sh7763_clk_init); + diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c new file mode 100644 index 00000000000..eabd5386812 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -0,0 +1,390 @@ +/* + * SH7763 Setup + * + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xffe80000, + .end = 0xffe80000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 22, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffe08000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 77, 79, 78 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xffec8000, + .end = 0xffec80ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 83, + .end = 83, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 usb_ohci_dma_mask = 0xffffffffUL; +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + +static struct resource usbf_resources[] = { + [0] = { + .start = 0xffec0000, + .end = 0xffec00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 84, + .end = 84, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbf_device = { + .name = "sh_udc", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usbf_resources), + .resource = usbf_resources, +}; + +static struct platform_device *sh7763_devices[] __initdata = { + &rtc_device, + &sci_device, + &usb_ohci_device, + &usbf_device, +}; + +static int __init sh7763_devices_setup(void) +{ + return platform_add_devices(sh7763_devices, + ARRAY_SIZE(sh7763_devices)); +} +__initcall(sh7763_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, LCDC, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + DMAC0_DMINT4, DMAC0_DMINT5, + IIC0, IIC1, + CMT, + GEINT0, GEINT1, GEINT2, + HAC, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, + PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, + STIF0, STIF1, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SIOF0, SIOF1, SIOF2, + USBH, USBFI0, USBFI1, + TPU, PCC, + MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, + SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3, + + /* interrupt groups */ + + TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5, + SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580), + INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), + INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), + INTC_VECT(LCDC, 0x620), + INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), + INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0), + INTC_VECT(DMAC0_DMAE, 0x6c0), + INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), + INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), + INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0), + INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0), + INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920), + INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960), + INTC_VECT(HAC, 0x980), + INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), + INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), + INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), + INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60), + INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0), + INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0), + INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20), + INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80), + INTC_VECT(USBFI1, 0xca0), + INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0), + INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), + INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), + INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0), + INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0), + INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), + INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), + INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), + INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), + INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20), + INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60), + INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), + INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), + INTC_GROUP(TMU345, TMU3, TMU4, TMU5), + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2), + INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(USBF, USBFI0, USBFI1), + INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), + INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), + INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ + { 0, 0, 0, 0, 0, 0, GPIO, 0, + SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB, + PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC, + HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } }, + { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */ + { 0, 0, 0, 0, 0, 0, SCIF2, USBF, + 0, 0, STIF1, STIF0, 0, 0, USBH, GETHER, + PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1, + LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, + TMU2, TMU2_TICPI } }, + { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } }, + { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } }, + { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } }, + { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC, + PCISERR, PCIINTA } }, + { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC, + PCIINTD, PCIC5 } }, + { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } }, + { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } }, + { 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } }, + { 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } }, + { 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } }, + { 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } }, + { 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } }, + { 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ + +static struct intc_vect irq_vectors[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), + INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), + INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), +}; + +static struct intc_mask_reg irq_mask_registers[] __initdata = { + { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg irq_prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg irq_sense_registers[] __initdata = { + { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, + NULL, NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); + +/* External interrupt pins in IRL mode */ + +static struct intc_vect irl_vectors[] __initdata = { + INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), + INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), + INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), + INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0), + INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320), + INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360), + INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0), + INTC_VECT(IRL_HHHL, 0x3c0), +}; + +static struct intc_mask_reg irl3210_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, +}; + +static struct intc_mask_reg irl7654_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, +}; + +static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors, + NULL, NULL, irl7654_mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors, + NULL, NULL, irl3210_mask_registers, NULL, NULL); + +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + +void __init plat_irq_setup(void) +{ + /* disable IRQ7-0 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + register_intc_controller(&intc_desc); +} + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + /* select IRQ mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0); + register_intc_controller(&intc_irq_desc); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl7654_desc); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl3210_desc); + break; + default: + BUG(); + } +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 48cd576754b..9cf1d2e998b 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -319,10 +319,10 @@ static const char *cpu_name[] = { [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", - [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", - [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", - [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", - [CPU_SHX3] = "SH-X3", + [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", + [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", + [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", + [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", [CPU_SH_NONE] = "Unknown" }; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 6fbfd140b7e..ddf63914453 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -395,7 +395,8 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) } else { #ifdef CONFIG_CPU_SUBTYPE_SH7343 /* Nothing */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \ +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ @@ -408,6 +409,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) static inline int scif_txroom(struct uart_port *port) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 85562040a6d..f5764ebcfe0 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -120,6 +120,12 @@ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ +# define SCSPTR1 0xffe08024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ @@ -419,6 +425,7 @@ SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) @@ -588,6 +595,15 @@ static inline int sci_rxd_in(struct uart_port *port) int ch = (port->mapbase - SMR0) >> 3; return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000) + return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffe08000) + return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH7770) static inline int sci_rxd_in(struct uart_port *port) { @@ -698,7 +714,8 @@ static inline int sci_rxd_in(struct uart_port *port) * -- Mitch Davis - 15 Jul 2000 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index 9ce67fd5119..def8128b8b7 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -35,7 +35,7 @@ static void __init check_bugs(void) case CPU_SH7750 ... CPU_SH4_501: *p++ = '4'; break; - case CPU_SH7770 ... CPU_SHX3: + case CPU_SH7763 ... CPU_SHX3: *p++ = '4'; *p++ = 'a'; break; diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index dc1d32a8637..1ac10b9a078 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -16,7 +16,8 @@ #define SCLKACR 0xa4150008 #define SCLKBCR 0xa415000c #define IrDACLKCR 0xa4150010 -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 #elif defined(CONFIG_CPU_SUBTYPE_SH7785) #define FRQCR0 0xffc80000 diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index f4a8da71ba4..c9b14161f73 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -30,7 +30,7 @@ enum cpu_type { CPU_SH7760, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3, + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3, /* SH4AL-DSP types */ CPU_SH7343, CPU_SH7722, -- cgit v1.2.3-70-g09d2 From c3aa92afd0a6c253df974556b4a43c0a182d1fc4 Mon Sep 17 00:00:00 2001 From: Andrew Murray Date: Tue, 8 Jan 2008 09:56:45 +0900 Subject: sh: sh7712 clock support This patch provides specific clock support for the SH7712. Signed-off-by: Andrew Murray Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/Makefile | 1 + arch/sh/kernel/cpu/sh3/clock-sh7712.c | 71 +++++++++++++++++++++++++++++++++++ include/asm-sh/cpu-sh3/freq.h | 5 +++ 3 files changed, 77 insertions(+) create mode 100644 arch/sh/kernel/cpu/sh3/clock-sh7712.c (limited to 'include') diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 1afd05e62d1..3ae4d9111f1 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -22,5 +22,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o +clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c new file mode 100644 index 00000000000..54f54df51ef --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7712.c @@ -0,0 +1,71 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7712.c + * + * SH7712 support for the clock framework + * + * Copyright (C) 2007 Andrew Murray + * + * Based on arch/sh/kernel/cpu/sh3/clock-sh3.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int multipliers[] = { 1, 2, 3 }; +static int divisors[] = { 1, 2, 3, 4, 6 }; + +static void master_clk_init(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = (frqcr & 0x0300) >> 8; + + clk->rate *= multipliers[idx]; +} + +static struct clk_ops sh7712_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = frqcr & 0x0007; + + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh7712_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = (frqcr & 0x0030) >> 4; + + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh7712_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7712_clk_ops[] = { + &sh7712_master_clk_ops, + &sh7712_module_clk_ops, + &sh7712_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7712_clk_ops)) + *ops = sh7712_clk_ops[idx]; +} + diff --git a/include/asm-sh/cpu-sh3/freq.h b/include/asm-sh/cpu-sh3/freq.h index 0a054b53b9d..53c62302b2e 100644 --- a/include/asm-sh/cpu-sh3/freq.h +++ b/include/asm-sh/cpu-sh3/freq.h @@ -10,7 +10,12 @@ #ifndef __ASM_CPU_SH3_FREQ_H #define __ASM_CPU_SH3_FREQ_H +#ifdef CONFIG_CPU_SUBTYPE_SH7712 +#define FRQCR 0xA415FF80 +#else #define FRQCR 0xffffff80 +#endif + #define MIN_DIVISOR_NR 0 #define MAX_DIVISOR_NR 4 -- cgit v1.2.3-70-g09d2 From e08d8aaeadac37c8d149b5d5bda6cf7a98d21e92 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 8 Jan 2008 18:05:03 +0900 Subject: sh: Fix posix_types.h userspace breakage from sh64 merge. Signed-off-by: Paul Mundt --- include/asm-sh/Kbuild | 5 ++ include/asm-sh/posix_types.h | 129 +++------------------------------------ include/asm-sh/posix_types_32.h | 122 +++++++++++++++++++++++++++++++++++++ include/asm-sh/posix_types_64.h | 131 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 265 insertions(+), 122 deletions(-) create mode 100644 include/asm-sh/posix_types_32.h create mode 100644 include/asm-sh/posix_types_64.h (limited to 'include') diff --git a/include/asm-sh/Kbuild b/include/asm-sh/Kbuild index 76a8ccf254a..43910cdf78a 100644 --- a/include/asm-sh/Kbuild +++ b/include/asm-sh/Kbuild @@ -1,3 +1,8 @@ include include/asm-generic/Kbuild.asm header-y += cpu-features.h + +unifdef-y += unistd_32.h +unifdef-y += unistd_64.h +unifdef-y += posix_types_32.h +unifdef-y += posix_types_64.h diff --git a/include/asm-sh/posix_types.h b/include/asm-sh/posix_types.h index 0a3d2f54ab2..4b9d11c9fc7 100644 --- a/include/asm-sh/posix_types.h +++ b/include/asm-sh/posix_types.h @@ -1,122 +1,7 @@ -#ifndef __ASM_SH_POSIX_TYPES_H -#define __ASM_SH_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) - int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ -} __kernel_fsid_t; - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); -} - - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) -{ - unsigned long __tmp = __fd / __NFDBITS; - unsigned long __rem = __fd % __NFDBITS; - return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *__p) -{ - unsigned long *__tmp = __p->fds_bits; - int __i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - __tmp[ 8] = 0; __tmp[ 9] = 0; - __tmp[10] = 0; __tmp[11] = 0; - __tmp[12] = 0; __tmp[13] = 0; - __tmp[14] = 0; __tmp[15] = 0; - return; - - case 8: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - __tmp[ 4] = 0; __tmp[ 5] = 0; - __tmp[ 6] = 0; __tmp[ 7] = 0; - return; - - case 4: - __tmp[ 0] = 0; __tmp[ 1] = 0; - __tmp[ 2] = 0; __tmp[ 3] = 0; - return; - } - } - __i = __FDSET_LONGS; - while (__i) { - __i--; - *__tmp = 0; - __tmp++; - } -} - -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ - -#endif /* __ASM_SH_POSIX_TYPES_H */ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "posix_types_32.h" +# else +# include "posix_types_64.h" +# endif +#endif /* __KERNEL__ */ diff --git a/include/asm-sh/posix_types_32.h b/include/asm-sh/posix_types_32.h new file mode 100644 index 00000000000..0a3d2f54ab2 --- /dev/null +++ b/include/asm-sh/posix_types_32.h @@ -0,0 +1,122 @@ +#ifndef __ASM_SH_POSIX_TYPES_H +#define __ASM_SH_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/include/asm-sh/posix_types_64.h b/include/asm-sh/posix_types_64.h new file mode 100644 index 00000000000..0620317a6f0 --- /dev/null +++ b/include/asm-sh/posix_types_64.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH64_POSIX_TYPES_H +#define __ASM_SH64_POSIX_TYPES_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/posix_types.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef long unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH64_POSIX_TYPES_H */ -- cgit v1.2.3-70-g09d2 From 7f3edee81fbd49114c28057512906f169caa0bed Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 10 Jan 2008 14:08:55 +0900 Subject: sh: intc - remove default interrupt priority tables This patch removes interrupt priority tables from the intc code. Optimal priority assignment varies with embedded application anyway, so keeping the interrupt priority tables together with cpu-specific code doesn't make sense. The function intc_set_priority() should be used instead to set the desired interrupt priority level. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/irq-r7780mp.c | 2 +- arch/sh/boards/renesas/r7780rp/irq-r7785rp.c | 2 +- arch/sh/boards/renesas/rts7751r2d/irq.c | 4 ++-- arch/sh/cchips/voyagergx/irq.c | 2 +- arch/sh/kernel/cpu/irq/intc.c | 31 ++++------------------------ arch/sh/kernel/cpu/sh2/setup-sh7619.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 10 ++------- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 11 ++-------- arch/sh/kernel/cpu/sh3/setup-sh7710.c | 16 ++------------ arch/sh/kernel/cpu/sh3/setup-sh7720.c | 14 ++----------- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 18 ++++++---------- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 13 ++---------- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 10 +-------- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 13 ++++-------- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 19 +++++------------ arch/sh/kernel/cpu/sh4a/setup-shx3.c | 14 +++---------- include/asm-sh/hw_irq.h | 12 +---------- 19 files changed, 42 insertions(+), 155 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c index 59b47fe061f..1f8f073f27b 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -47,7 +47,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); unsigned char * __init highlander_init_irq_r7780mp(void) { diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index b2c6a84673b..bbf18afc29a 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -41,7 +41,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); unsigned char * __init highlander_init_irq_r7785rp(void) { diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 7cc2813adfe..3fecd49e0d2 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -71,7 +71,7 @@ static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1, - NULL, NULL, mask_registers_r2d_1, NULL, NULL); + NULL, mask_registers_r2d_1, NULL, NULL); #endif /* CONFIG_RTS7751R2D_1 */ @@ -109,7 +109,7 @@ static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus, - NULL, NULL, mask_registers_r2d_plus, NULL, NULL); + NULL, mask_registers_r2d_plus, NULL, NULL); #endif /* CONFIG_RTS7751R2D_PLUS */ diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index ade30387684..e7e78c612fa 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -58,7 +58,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); static unsigned int voyagergx_stat2irq[32] = { IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D, diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index 6ac018c15e0..84806b2027f 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -335,31 +335,6 @@ static intc_enum __init intc_grp_id(struct intc_desc *desc, return 0; } -static unsigned int __init intc_prio_value(struct intc_desc *desc, - intc_enum enum_id, int do_grps) -{ - struct intc_prio *p = desc->priorities; - unsigned int i; - - for (i = 0; p && enum_id && i < desc->nr_priorities; i++) { - p = desc->priorities + i; - - if (p->enum_id != enum_id) - continue; - - return p->priority; - } - - if (do_grps) - return intc_prio_value(desc, intc_grp_id(desc, enum_id), 0); - - /* default to the lowest priority possible if no priority is set - * - this needs to be at least 2 for 5-bit priorities on 7780 - */ - - return 2; -} - static unsigned int __init intc_mask_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id, int do_grps) @@ -518,8 +493,10 @@ static void __init intc_register_irq(struct intc_desc *desc, handle_level_irq, "level"); set_irq_chip_data(irq, (void *)data[primary]); - /* record the desired priority level */ - intc_prio_level[irq] = intc_prio_value(desc, enum_id, 1); + /* set priority level + * - this needs to be at least 2 for 5-bit priorities on 7780 + */ + intc_prio_level[irq] = 2; /* enable secondary masking method if present */ if (data[!primary]) diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index ec6adc3f306..b230eb278ce 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -65,7 +65,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups, - NULL, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index 3518f9c37d9..db6ef5cecde 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -235,7 +235,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, - NULL, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index bd745aa8722..a564425b905 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -167,7 +167,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups, - NULL, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index f6c65f2659e..dd0a20a685f 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -66,12 +66,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(DMAC, 7), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF0, 3), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } }, @@ -85,7 +79,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct intc_vect vectors_irq[] __initdata = { INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), @@ -93,7 +87,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 60b04b1f945..969804bb523 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -81,13 +81,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(DMAC, 7), - INTC_PRIO(SCI, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF0, 3), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } }, @@ -109,7 +102,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -120,7 +113,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #endif static struct resource rtc_resources[] = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 84e5629fa84..0cc0e2bf135 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -73,18 +73,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(DMAC1, 7), - INTC_PRIO(DMAC2, 7), - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SIOF0, 3), - INTC_PRIO(SIOF1, 3), - INTC_PRIO(EDMAC0, 5), - INTC_PRIO(EDMAC1, 5), - INTC_PRIO(EDMAC2, 5), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, @@ -101,7 +89,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct intc_vect vectors_irq[] __initdata = { INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), @@ -109,7 +97,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 00facd028a0..c00471a8921 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -156,16 +156,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 2), - INTC_PRIO(SCIF1, 2), - INTC_PRIO(DMAC1, 1), - INTC_PRIO(DMAC2, 1), - INTC_PRIO(RTC, 2), - INTC_PRIO(TMU, 2), - INTC_PRIO(TPU, 2), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, @@ -184,7 +174,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct intc_sense_reg sense_registers[] __initdata = { { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, @@ -197,7 +187,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq, - NULL, priorities, NULL, prio_registers, sense_registers); + NULL, NULL, prio_registers, sense_registers); void __init plat_irq_setup_pins(int mode) { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 523f68a9ce0..ae3603aca61 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -126,12 +126,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF, 3), - INTC_PRIO(SCI1, 3), - INTC_PRIO(DMAC, 7), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } }, @@ -143,7 +137,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); /* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ @@ -163,7 +157,7 @@ static struct intc_group groups_dma4[] __initdata = { static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4", vectors_dma4, groups_dma4, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #endif /* SH7750R and SH7751R both have 8-channel DMA controllers */ @@ -184,7 +178,7 @@ static struct intc_group groups_dma8[] __initdata = { static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8", vectors_dma8, groups_dma8, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #endif /* SH7750R, SH7751 and SH7751R all have two extra timer channels */ @@ -205,7 +199,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34", - vectors_tmu34, NULL, priorities, + vectors_tmu34, NULL, mask_registers, prio_registers, NULL); #endif @@ -216,7 +210,7 @@ static struct intc_vect vectors_irlm[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); /* SH7751 and SH7751R both have PCI */ #if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R) @@ -233,7 +227,7 @@ static struct intc_group groups_pci[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_pci, "sh7750_pci", vectors_pci, groups_pci, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 7a898cb1d94..85f81579b97 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -92,15 +92,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SIM, 3), - INTC_PRIO(DMAC, 7), - INTC_PRIO(DMABRG, 13), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */ { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21, @@ -132,7 +123,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct intc_vect vectors_irq[] __initdata = { INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), @@ -140,7 +131,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index b9c6547c4a9..73c778d40d1 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -157,14 +157,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(TMU0, 2), - INTC_PRIO(TMU1, 2), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */ { } }, @@ -217,7 +209,7 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, mask_registers, prio_registers, sense_registers); void __init plat_irq_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index e8fd33ff060..293004b526f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -168,11 +168,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ { 0, 0, 0, 0, 0, 0, GPIO, FLCTL, @@ -195,7 +190,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ @@ -223,7 +218,7 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, - NULL, NULL, irq_mask_registers, irq_prio_registers, + NULL, irq_mask_registers, irq_prio_registers, irq_sense_registers); /* External interrupt pins in IRL mode */ @@ -257,10 +252,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors, - NULL, NULL, irl7654_mask_registers, NULL, NULL); + NULL, irl7654_mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors, - NULL, NULL, irl3210_mask_registers, NULL, NULL); + NULL, irl3210_mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 39b215d6cee..74b60e96cdf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -178,15 +178,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF3, 3), - INTC_PRIO(SCIF4, 3), - INTC_PRIO(SCIF5, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, @@ -227,7 +218,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ @@ -248,11 +239,11 @@ static struct intc_sense_reg sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, - NULL, NULL, mask_registers, prio_registers, + NULL, mask_registers, prio_registers, sense_registers); static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, - NULL, NULL, mask_registers, prio_registers, + NULL, mask_registers, prio_registers, sense_registers); /* External interrupt pins in IRL mode */ @@ -280,10 +271,10 @@ static struct intc_vect vectors_irl4567[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index c6cdd7e3b04..4dc958b6b31 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -165,13 +165,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF3, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, @@ -218,7 +211,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) }, }; -static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ @@ -232,8 +225,7 @@ static struct intc_sense_reg sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups, - priorities, mask_registers, prio_registers, - sense_registers); + mask_registers, prio_registers, sense_registers); /* External interrupt pins in IRL mode */ static struct intc_vect vectors_irl[] __initdata = { @@ -248,7 +240,7 @@ static struct intc_vect vectors_irl[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); void __init plat_irq_setup_pins(int mode) { diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index cb0b6c9f702..c958fdaa009 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -33,13 +33,6 @@ struct intc_vect { #define INTC_VECT(enum_id, vect) { enum_id, vect } #define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) -struct intc_prio { - intc_enum enum_id; - unsigned char priority; -}; - -#define INTC_PRIO(enum_id, prio) { enum_id, prio } - struct intc_group { intc_enum enum_id; intc_enum enum_ids[32]; @@ -79,8 +72,6 @@ struct intc_desc { unsigned int nr_vectors; struct intc_group *groups; unsigned int nr_groups; - struct intc_prio *priorities; - unsigned int nr_priorities; struct intc_mask_reg *mask_regs; unsigned int nr_mask_regs; struct intc_prio_reg *prio_regs; @@ -92,10 +83,9 @@ struct intc_desc { #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) #define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ - priorities, mask_regs, prio_regs, sense_regs) \ + mask_regs, prio_regs, sense_regs) \ struct intc_desc symbol __initdata = { \ _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ - _INTC_ARRAY(priorities), \ _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ _INTC_ARRAY(sense_regs), \ chipname, \ -- cgit v1.2.3-70-g09d2 From 29ec6778a49d30c47345afdfaf1d03acff3cf656 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 15 Jan 2008 12:47:53 +0900 Subject: sh: remove voyagergx This patch removes redundant irq handling code together with unused consistent alloc code. R2D uart setup code is changed to use sm501-regs.h and unused header files are removed. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Makefile | 1 - arch/sh/boards/renesas/rts7751r2d/irq.c | 4 - arch/sh/boards/renesas/rts7751r2d/setup.c | 73 ++++--- arch/sh/cchips/voyagergx/Makefile | 9 - arch/sh/cchips/voyagergx/consistent.c | 121 ----------- arch/sh/cchips/voyagergx/irq.c | 101 --------- arch/sh/cchips/voyagergx/setup.c | 37 ---- include/asm-sh/voyagergx.h | 341 ------------------------------ 8 files changed, 39 insertions(+), 648 deletions(-) delete mode 100644 arch/sh/cchips/voyagergx/Makefile delete mode 100644 arch/sh/cchips/voyagergx/consistent.c delete mode 100644 arch/sh/cchips/voyagergx/irq.c delete mode 100644 arch/sh/cchips/voyagergx/setup.c delete mode 100644 include/asm-sh/voyagergx.h (limited to 'include') diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 292d8618248..e04b1929365 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -138,7 +138,6 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -core-$(CONFIG_MFD_SM501) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 3fecd49e0d2..8e49f6e5124 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #define R2D_NR_IRL 13 @@ -153,7 +152,4 @@ void __init init_rts7751r2d_IRQ(void) } register_intc_controller(d); -#ifdef CONFIG_MFD_SM501 - setup_voyagergx_irq(); -#endif } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index dc143c10cd1..8cb49661707 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -13,36 +13,13 @@ #include #include #include +#include #include #include #include #include -#include #include -static void __init voyagergx_serial_init(void) -{ - unsigned long val; - - /* - * GPIO Control - */ - val = readl((void __iomem *)GPIO_MUX_HIGH); - val |= 0x00001fe0; - writel(val, (void __iomem *)GPIO_MUX_HIGH); - - /* - * Power Mode Gate - */ - val = readl((void __iomem *)POWER_MODE0_GATE); - val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - writel(val, (void __iomem *)POWER_MODE0_GATE); - - val = readl((void __iomem *)POWER_MODE1_GATE); - val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - writel(val, (void __iomem *)POWER_MODE1_GATE); -} - static struct resource cf_ide_resources[] = { [0] = { .start = PA_AREA5_IO + 0x1000, @@ -94,11 +71,11 @@ static struct platform_device heartbeat_device = { #ifdef CONFIG_MFD_SM501 static struct plat_serial8250_port uart_platform_data[] = { { - .membase = (void __iomem *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, + .membase = (void __iomem *)0xb3e30000, + .mapbase = 0xb3e30000, .iotype = UPIO_MEM, - .irq = IRQ_SM501_U0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .irq = IRQ_VOYAGER, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, .regshift = 2, .uartclk = (9600 * 16), }, @@ -125,7 +102,7 @@ static struct resource sm501_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_SM501_CV, + .start = IRQ_VOYAGER, .flags = IORESOURCE_IRQ, }, }; @@ -167,7 +144,15 @@ static struct sm501_platdata_fb sm501_fb_pdata = { .flags = SM501_FBPD_SWAP_FB_ENDIAN, }; +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, +}; + static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, .fb = &sm501_fb_pdata, }; @@ -237,6 +222,7 @@ u8 rts7751r2d_readb(void __iomem *addr) */ static void __init rts7751r2d_setup(char **cmdline_p) { + void __iomem *sm501_reg; u16 ver = ctrl_inw(PA_VERREG); printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); @@ -247,7 +233,30 @@ static void __init rts7751r2d_setup(char **cmdline_p) ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; - voyagergx_serial_init(); + /* sm501 dram configuration: + * ColSizeX = 11 - External Memory Column Size: 256 words. + * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks. + * RstX = 1 - External Memory Reset: Normal. + * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks. + * BwC = 1 - Local Memory Block Write Cycle Time: 2 clocks. + * BwP = 1 - Local Memory Block Write to Pre-Charge Delay: 1 clock. + * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks. + * Rst = 1 - Internal Memory Reset: Normal. + * RA = 1 - Internal Memory Remain in Active State: Do not remain. + */ + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(readl(sm501_reg) | 0x00f107c0, sm501_reg); + + /* + * Power Mode Gate - Enable UART0 + */ + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE; + writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE; + writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); } /* @@ -260,8 +269,4 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_irq_demux = rts7751r2d_irq_demux, .mv_writeb = rts7751r2d_writeb, .mv_readb = rts7751r2d_readb, -#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD) - .mv_consistent_alloc = voyagergx_consistent_alloc, - .mv_consistent_free = voyagergx_consistent_free, -#endif }; diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile deleted file mode 100644 index f73963cb374..00000000000 --- a/arch/sh/cchips/voyagergx/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for VoyagerGX -# - -obj-y := irq.o setup.o - -obj-$(CONFIG_USB_OHCI_HCD) += consistent.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c deleted file mode 100644 index 07e8b9c5a53..00000000000 --- a/arch/sh/cchips/voyagergx/consistent.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/sh/cchips/voyagergx/consistent.c - * - * Copyright (C) 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include - - -struct voya_alloc_entry { - struct list_head list; - unsigned long ofs; - unsigned long len; -}; - -static DEFINE_SPINLOCK(voya_list_lock); -static LIST_HEAD(voya_alloc_list); - -#define OHCI_SRAM_START 0xb0000000 -#define OHCI_HCCA_SIZE 0x100 -#define OHCI_SRAM_SIZE 0x10000 - -#define VOYAGER_OHCI_NAME "voyager-ohci" - -void *voyagergx_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t flag) -{ - struct list_head *list = &voya_alloc_list; - struct voya_alloc_entry *entry; - unsigned long start, end; - unsigned long flags; - - /* - * The SM501 contains an integrated 8051 with its own SRAM. - * Devices within the cchip can all hook into the 8051 SRAM. - * We presently use this for the OHCI. - * - * Everything else goes through consistent_alloc(). - */ - if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME)) - return NULL; - - start = OHCI_SRAM_START + OHCI_HCCA_SIZE; - - entry = kmalloc(sizeof(struct voya_alloc_entry), GFP_ATOMIC); - if (!entry) - return ERR_PTR(-ENOMEM); - - entry->len = (size + 15) & ~15; - - /* - * The basis for this allocator is dwmw2's malloc.. the - * Matrox allocator :-) - */ - spin_lock_irqsave(&voya_list_lock, flags); - list_for_each(list, &voya_alloc_list) { - struct voya_alloc_entry *p; - - p = list_entry(list, struct voya_alloc_entry, list); - - if (p->ofs - start >= size) - goto out; - - start = p->ofs + p->len; - } - - end = start + (OHCI_SRAM_SIZE - OHCI_HCCA_SIZE); - list = &voya_alloc_list; - - if (end - start >= size) { -out: - entry->ofs = start; - list_add_tail(&entry->list, list); - spin_unlock_irqrestore(&voya_list_lock, flags); - - *handle = start; - return (void *)start; - } - - kfree(entry); - spin_unlock_irqrestore(&voya_list_lock, flags); - - return ERR_PTR(-EINVAL); -} - -int voyagergx_consistent_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t handle) -{ - struct voya_alloc_entry *entry; - unsigned long flags; - - if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME)) - return -EINVAL; - - spin_lock_irqsave(&voya_list_lock, flags); - list_for_each_entry(entry, &voya_alloc_list, list) { - if (entry->ofs != handle) - continue; - - list_del(&entry->list); - kfree(entry); - - break; - } - spin_unlock_irqrestore(&voya_list_lock, flags); - - return 0; -} - -EXPORT_SYMBOL(voyagergx_consistent_alloc); -EXPORT_SYMBOL(voyagergx_consistent_free); diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c deleted file mode 100644 index e7e78c612fa..00000000000 --- a/arch/sh/cchips/voyagergx/irq.c +++ /dev/null @@ -1,101 +0,0 @@ -/* -------------------------------------------------------------------- */ -/* setup_voyagergx.c: */ -/* -------------------------------------------------------------------- */ -/* This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Copyright 2003 (c) Lineo uSolutions,Inc. -*/ -#include -#include -#include -#include -#include - -enum { - UNUSED = 0, - - /* voyager specific interrupt sources */ - UP, G54, G53, G52, G51, G50, G49, G48, - I2C, PW, DMA, PCI, I2S, AC, US, - U1, U0, CV, MC, S1, S0, - UH, TWOD, ZD, PV, CI, -}; - -static struct intc_vect vectors[] __initdata = { - INTC_IRQ(UP, IRQ_SM501_UP), INTC_IRQ(G54, IRQ_SM501_G54), - INTC_IRQ(G53, IRQ_SM501_G53), INTC_IRQ(G52, IRQ_SM501_G52), - INTC_IRQ(G51, IRQ_SM501_G51), INTC_IRQ(G50, IRQ_SM501_G50), - INTC_IRQ(G49, IRQ_SM501_G49), INTC_IRQ(G48, IRQ_SM501_G48), - INTC_IRQ(I2C, IRQ_SM501_I2C), INTC_IRQ(PW, IRQ_SM501_PW), - INTC_IRQ(DMA, IRQ_SM501_DMA), INTC_IRQ(PCI, IRQ_SM501_PCI), - INTC_IRQ(I2S, IRQ_SM501_I2S), INTC_IRQ(AC, IRQ_SM501_AC), - INTC_IRQ(US, IRQ_SM501_US), INTC_IRQ(U1, IRQ_SM501_U1), - INTC_IRQ(U0, IRQ_SM501_U0), INTC_IRQ(CV, IRQ_SM501_CV), - INTC_IRQ(MC, IRQ_SM501_MC), INTC_IRQ(S1, IRQ_SM501_S1), - INTC_IRQ(S0, IRQ_SM501_S0), INTC_IRQ(UH, IRQ_SM501_UH), - INTC_IRQ(TWOD, IRQ_SM501_2D), INTC_IRQ(ZD, IRQ_SM501_ZD), - INTC_IRQ(PV, IRQ_SM501_PV), INTC_IRQ(CI, IRQ_SM501_CI), -}; - -static struct intc_mask_reg mask_registers[] __initdata = { - { VOYAGER_INT_MASK, 0, 32, /* "Interrupt Mask", MMIO_base + 0x30 */ - { UP, G54, G53, G52, G51, G50, G49, G48, - I2C, PW, 0, DMA, PCI, I2S, AC, US, - 0, 0, U1, U0, CV, MC, S1, S0, - 0, UH, 0, 0, TWOD, ZD, PV, CI } }, -}; - -static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors, - NULL, mask_registers, NULL, NULL); - -static unsigned int voyagergx_stat2irq[32] = { - IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D, - 0, 0, IRQ_SM501_UH, 0, - IRQ_SM501_S0, IRQ_SM501_S1, IRQ_SM501_MC, IRQ_SM501_CV, - IRQ_SM501_U0, IRQ_SM501_U1, 0, 0, - IRQ_SM501_US, IRQ_SM501_AC, IRQ_SM501_I2S, IRQ_SM501_PCI, - IRQ_SM501_DMA, 0, IRQ_SM501_PW, IRQ_SM501_I2C, - IRQ_SM501_G48, IRQ_SM501_G49, IRQ_SM501_G50, IRQ_SM501_G51, - IRQ_SM501_G52, IRQ_SM501_G53, IRQ_SM501_G54, IRQ_SM501_UP -}; - -static void voyagergx_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - unsigned long intv = ctrl_inl(INT_STATUS); - struct irq_desc *ext_desc; - unsigned int ext_irq; - unsigned int k = 0; - - while (intv) { - ext_irq = voyagergx_stat2irq[k]; - if (ext_irq && (intv & 1)) { - ext_desc = irq_desc + ext_irq; - handle_level_irq(ext_irq, ext_desc); - } - intv >>= 1; - k++; - } -} - -void __init setup_voyagergx_irq(void) -{ - printk(KERN_INFO "VoyagerGX on irq %d (mapped into %d to %d)\n", - IRQ_VOYAGER, - VOYAGER_IRQ_BASE, - VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1); - - register_intc_controller(&intc_desc); - set_irq_chained_handler(IRQ_VOYAGER, voyagergx_irq_demux); -} diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c deleted file mode 100644 index 33f03027c19..00000000000 --- a/arch/sh/cchips/voyagergx/setup.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/sh/cchips/voyagergx/setup.c - * - * Setup routines for VoyagerGX cchip. - * - * Copyright (C) 2003 Lineo uSolutions, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include - -static int __init setup_voyagergx(void) -{ - unsigned long val; - - val = readl((void __iomem *)DRAM_CTRL); - val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | - DRAM_CTRL_CPU_ACTIVE_PRECHARGE | - DRAM_CTRL_CPU_RESET | - DRAM_CTRL_REFRESH_COMMAND | - DRAM_CTRL_BLOCK_WRITE_TIME | - DRAM_CTRL_BLOCK_WRITE_PRECHARGE | - DRAM_CTRL_ACTIVE_PRECHARGE | - DRAM_CTRL_RESET | - DRAM_CTRL_REMAIN_ACTIVE); - writel(val, (void __iomem *)DRAM_CTRL); - - return 0; -} - -module_init(setup_voyagergx); diff --git a/include/asm-sh/voyagergx.h b/include/asm-sh/voyagergx.h deleted file mode 100644 index 45b4547c74a..00000000000 --- a/include/asm-sh/voyagergx.h +++ /dev/null @@ -1,341 +0,0 @@ -/* -------------------------------------------------------------------- */ -/* voyagergx.h */ -/* -------------------------------------------------------------------- */ -/* This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Copyright 2003 (c) Lineo uSolutions,Inc. -*/ -/* -------------------------------------------------------------------- */ - -#ifndef _VOYAGER_GX_REG_H -#define _VOYAGER_GX_REG_H - -#define VOYAGER_BASE 0xb3e00000 -#define VOYAGER_USBH_BASE (0x40000 + VOYAGER_BASE) -#define VOYAGER_UART_BASE (0x30000 + VOYAGER_BASE) -#define VOYAGER_AC97_BASE (0xa0000 + VOYAGER_BASE) - -#define VOYAGER_IRQ_NUM 26 -#define VOYAGER_IRQ_BASE 200 - -#define IRQ_SM501_UP (VOYAGER_IRQ_BASE + 0) -#define IRQ_SM501_G54 (VOYAGER_IRQ_BASE + 1) -#define IRQ_SM501_G53 (VOYAGER_IRQ_BASE + 2) -#define IRQ_SM501_G52 (VOYAGER_IRQ_BASE + 3) -#define IRQ_SM501_G51 (VOYAGER_IRQ_BASE + 4) -#define IRQ_SM501_G50 (VOYAGER_IRQ_BASE + 5) -#define IRQ_SM501_G49 (VOYAGER_IRQ_BASE + 6) -#define IRQ_SM501_G48 (VOYAGER_IRQ_BASE + 7) -#define IRQ_SM501_I2C (VOYAGER_IRQ_BASE + 8) -#define IRQ_SM501_PW (VOYAGER_IRQ_BASE + 9) -#define IRQ_SM501_DMA (VOYAGER_IRQ_BASE + 10) -#define IRQ_SM501_PCI (VOYAGER_IRQ_BASE + 11) -#define IRQ_SM501_I2S (VOYAGER_IRQ_BASE + 12) -#define IRQ_SM501_AC (VOYAGER_IRQ_BASE + 13) -#define IRQ_SM501_US (VOYAGER_IRQ_BASE + 14) -#define IRQ_SM501_U1 (VOYAGER_IRQ_BASE + 15) -#define IRQ_SM501_U0 (VOYAGER_IRQ_BASE + 16) -#define IRQ_SM501_CV (VOYAGER_IRQ_BASE + 17) -#define IRQ_SM501_MC (VOYAGER_IRQ_BASE + 18) -#define IRQ_SM501_S1 (VOYAGER_IRQ_BASE + 19) -#define IRQ_SM501_S0 (VOYAGER_IRQ_BASE + 20) -#define IRQ_SM501_UH (VOYAGER_IRQ_BASE + 21) -#define IRQ_SM501_2D (VOYAGER_IRQ_BASE + 22) -#define IRQ_SM501_ZD (VOYAGER_IRQ_BASE + 23) -#define IRQ_SM501_PV (VOYAGER_IRQ_BASE + 24) -#define IRQ_SM501_CI (VOYAGER_IRQ_BASE + 25) - -/* ----- MISC controle register ------------------------------ */ -#define MISC_CTRL (0x000004 + VOYAGER_BASE) -#define MISC_CTRL_USBCLK_48 (3 << 28) -#define MISC_CTRL_USBCLK_96 (2 << 28) -#define MISC_CTRL_USBCLK_CRYSTAL (1 << 28) - -/* ----- GPIO[31:0] register --------------------------------- */ -#define GPIO_MUX_LOW (0x000008 + VOYAGER_BASE) -#define GPIO_MUX_LOW_AC97 0x1F000000 -#define GPIO_MUX_LOW_8051 0x0000ffff -#define GPIO_MUX_LOW_PWM (1 << 29) - -/* ----- GPIO[63:32] register --------------------------------- */ -#define GPIO_MUX_HIGH (0x00000C + VOYAGER_BASE) - -/* ----- DRAM controle register ------------------------------- */ -#define DRAM_CTRL (0x000010 + VOYAGER_BASE) -#define DRAM_CTRL_EMBEDDED (1 << 31) -#define DRAM_CTRL_CPU_BURST_1 (0 << 28) -#define DRAM_CTRL_CPU_BURST_2 (1 << 28) -#define DRAM_CTRL_CPU_BURST_4 (2 << 28) -#define DRAM_CTRL_CPU_BURST_8 (3 << 28) -#define DRAM_CTRL_CPU_CAS_LATENCY (1 << 27) -#define DRAM_CTRL_CPU_SIZE_2 (0 << 24) -#define DRAM_CTRL_CPU_SIZE_4 (1 << 24) -#define DRAM_CTRL_CPU_SIZE_64 (4 << 24) -#define DRAM_CTRL_CPU_SIZE_32 (5 << 24) -#define DRAM_CTRL_CPU_SIZE_16 (6 << 24) -#define DRAM_CTRL_CPU_SIZE_8 (7 << 24) -#define DRAM_CTRL_CPU_COLUMN_SIZE_1024 (0 << 22) -#define DRAM_CTRL_CPU_COLUMN_SIZE_512 (2 << 22) -#define DRAM_CTRL_CPU_COLUMN_SIZE_256 (3 << 22) -#define DRAM_CTRL_CPU_ACTIVE_PRECHARGE (1 << 21) -#define DRAM_CTRL_CPU_RESET (1 << 20) -#define DRAM_CTRL_CPU_BANKS (1 << 19) -#define DRAM_CTRL_CPU_WRITE_PRECHARGE (1 << 18) -#define DRAM_CTRL_BLOCK_WRITE (1 << 17) -#define DRAM_CTRL_REFRESH_COMMAND (1 << 16) -#define DRAM_CTRL_SIZE_4 (0 << 13) -#define DRAM_CTRL_SIZE_8 (1 << 13) -#define DRAM_CTRL_SIZE_16 (2 << 13) -#define DRAM_CTRL_SIZE_32 (3 << 13) -#define DRAM_CTRL_SIZE_64 (4 << 13) -#define DRAM_CTRL_SIZE_2 (5 << 13) -#define DRAM_CTRL_COLUMN_SIZE_256 (0 << 11) -#define DRAM_CTRL_COLUMN_SIZE_512 (2 << 11) -#define DRAM_CTRL_COLUMN_SIZE_1024 (3 << 11) -#define DRAM_CTRL_BLOCK_WRITE_TIME (1 << 10) -#define DRAM_CTRL_BLOCK_WRITE_PRECHARGE (1 << 9) -#define DRAM_CTRL_ACTIVE_PRECHARGE (1 << 8) -#define DRAM_CTRL_RESET (1 << 7) -#define DRAM_CTRL_REMAIN_ACTIVE (1 << 6) -#define DRAM_CTRL_BANKS (1 << 1) -#define DRAM_CTRL_WRITE_PRECHARGE (1 << 0) - -/* ----- Arvitration control register -------------------------- */ -#define ARBITRATION_CTRL (0x000014 + VOYAGER_BASE) -#define ARBITRATION_CTRL_CPUMEM (1 << 29) -#define ARBITRATION_CTRL_INTMEM (1 << 28) -#define ARBITRATION_CTRL_USB_OFF (0 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_1 (1 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_2 (2 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_3 (3 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_4 (4 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_5 (5 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_6 (6 << 24) -#define ARBITRATION_CTRL_USB_PRIORITY_7 (7 << 24) -#define ARBITRATION_CTRL_PANEL_OFF (0 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_1 (1 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_2 (2 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_3 (3 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_4 (4 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_5 (5 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_6 (6 << 20) -#define ARBITRATION_CTRL_PANEL_PRIORITY_7 (7 << 20) -#define ARBITRATION_CTRL_ZVPORT_OFF (0 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_1 (1 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_2 (2 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_3 (3 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_4 (4 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_5 (5 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_6 (6 << 16) -#define ARBITRATION_CTRL_ZVPORTL_PRIORITY_7 (7 << 16) -#define ARBITRATION_CTRL_CMD_INTPR_OFF (0 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_1 (1 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_2 (2 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_3 (3 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_4 (4 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_5 (5 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_6 (6 << 12) -#define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_7 (7 << 12) -#define ARBITRATION_CTRL_DMA_OFF (0 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_1 (1 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_2 (2 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_3 (3 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_4 (4 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_5 (5 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_6 (6 << 8) -#define ARBITRATION_CTRL_DMA_PRIORITY_7 (7 << 8) -#define ARBITRATION_CTRL_VIDEO_OFF (0 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_1 (1 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_2 (2 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_3 (3 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_4 (4 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_5 (5 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_6 (6 << 4) -#define ARBITRATION_CTRL_VIDEO_PRIORITY_7 (7 << 4) -#define ARBITRATION_CTRL_CRT_OFF (0 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_1 (1 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_2 (2 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_3 (3 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_4 (4 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_5 (5 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_6 (6 << 0) -#define ARBITRATION_CTRL_CRT_PRIORITY_7 (7 << 0) - -/* ----- Command list status register -------------------------- */ -#define CMD_INTPR_STATUS (0x000024 + VOYAGER_BASE) - -/* ----- Interrupt status register ----------------------------- */ -#define INT_STATUS (0x00002c + VOYAGER_BASE) -#define INT_STATUS_UH (1 << 6) -#define INT_STATUS_MC (1 << 10) -#define INT_STATUS_U0 (1 << 12) -#define INT_STATUS_U1 (1 << 13) -#define INT_STATUS_AC (1 << 17) - -/* ----- Interrupt mask register ------------------------------ */ -#define VOYAGER_INT_MASK (0x000030 + VOYAGER_BASE) -#define VOYAGER_INT_MASK_AC (1 << 17) - -/* ----- Current Gate register ---------------------------------*/ -#define CURRENT_GATE (0x000038 + VOYAGER_BASE) - -/* ----- Power mode 0 gate register --------------------------- */ -#define POWER_MODE0_GATE (0x000040 + VOYAGER_BASE) -#define POWER_MODE0_GATE_G (1 << 6) -#define POWER_MODE0_GATE_U0 (1 << 7) -#define POWER_MODE0_GATE_U1 (1 << 8) -#define POWER_MODE0_GATE_UH (1 << 11) -#define POWER_MODE0_GATE_AC (1 << 18) - -/* ----- Power mode 1 gate register --------------------------- */ -#define POWER_MODE1_GATE (0x000048 + VOYAGER_BASE) -#define POWER_MODE1_GATE_G (1 << 6) -#define POWER_MODE1_GATE_U0 (1 << 7) -#define POWER_MODE1_GATE_U1 (1 << 8) -#define POWER_MODE1_GATE_UH (1 << 11) -#define POWER_MODE1_GATE_AC (1 << 18) - -/* ----- Power mode 0 clock register -------------------------- */ -#define POWER_MODE0_CLOCK (0x000044 + VOYAGER_BASE) - -/* ----- Power mode 1 clock register -------------------------- */ -#define POWER_MODE1_CLOCK (0x00004C + VOYAGER_BASE) - -/* ----- Power mode control register ------------------------- */ -#define POWER_MODE_CTRL (0x000054 + VOYAGER_BASE) - -/* ----- Miscellaneous Timing register ------------------------ */ -#define SYSTEM_DRAM_CTRL (0x000068 + VOYAGER_BASE) - -/* ----- PWM register ------------------------------------------*/ -#define PWM_0 (0x010020 + VOYAGER_BASE) -#define PWM_0_HC(x) (((x)&0x0fff)<<20) -#define PWM_0_LC(x) (((x)&0x0fff)<<8 ) -#define PWM_0_CLK_DEV(x) (((x)&0x000f)<<4 ) -#define PWM_0_EN (1<<0) - -/* ----- I2C register ----------------------------------------- */ -#define I2C_BYTECOUNT (0x010040 + VOYAGER_BASE) -#define I2C_CONTROL (0x010041 + VOYAGER_BASE) -#define I2C_STATUS (0x010042 + VOYAGER_BASE) -#define I2C_RESET (0x010042 + VOYAGER_BASE) -#define I2C_SADDRESS (0x010043 + VOYAGER_BASE) -#define I2C_DATA (0x010044 + VOYAGER_BASE) - -/* ----- Controle register bits ----------------------------------------- */ -#define I2C_CONTROL_E (1 << 0) -#define I2C_CONTROL_MODE (1 << 1) -#define I2C_CONTROL_STATUS (1 << 2) -#define I2C_CONTROL_INT (1 << 4) -#define I2C_CONTROL_INTACK (1 << 5) -#define I2C_CONTROL_REPEAT (1 << 6) - -/* ----- Status register bits ----------------------------------------- */ -#define I2C_STATUS_BUSY (1 << 0) -#define I2C_STATUS_ACK (1 << 1) -#define I2C_STATUS_ERROR (1 << 2) -#define I2C_STATUS_COMPLETE (1 << 3) - -/* ----- Reset register ---------------------------------------------- */ -#define I2C_RESET_ERROR (1 << 2) - -/* ----- transmission frequencies ------------------------------------- */ -#define I2C_SADDRESS_SELECT (1 << 0) - -/* ----- Display Controll register ----------------------------------------- */ -#define PANEL_DISPLAY_CTRL (0x080000 + VOYAGER_BASE) -#define PANEL_DISPLAY_CTRL_BIAS (1<<26) -#define PANEL_PAN_CTRL (0x080004 + VOYAGER_BASE) -#define PANEL_COLOR_KEY (0x080008 + VOYAGER_BASE) -#define PANEL_FB_ADDRESS (0x08000C + VOYAGER_BASE) -#define PANEL_FB_WIDTH (0x080010 + VOYAGER_BASE) -#define PANEL_WINDOW_WIDTH (0x080014 + VOYAGER_BASE) -#define PANEL_WINDOW_HEIGHT (0x080018 + VOYAGER_BASE) -#define PANEL_PLANE_TL (0x08001C + VOYAGER_BASE) -#define PANEL_PLANE_BR (0x080020 + VOYAGER_BASE) -#define PANEL_HORIZONTAL_TOTAL (0x080024 + VOYAGER_BASE) -#define PANEL_HORIZONTAL_SYNC (0x080028 + VOYAGER_BASE) -#define PANEL_VERTICAL_TOTAL (0x08002C + VOYAGER_BASE) -#define PANEL_VERTICAL_SYNC (0x080030 + VOYAGER_BASE) -#define PANEL_CURRENT_LINE (0x080034 + VOYAGER_BASE) -#define VIDEO_DISPLAY_CTRL (0x080040 + VOYAGER_BASE) -#define VIDEO_FB_0_ADDRESS (0x080044 + VOYAGER_BASE) -#define VIDEO_FB_WIDTH (0x080048 + VOYAGER_BASE) -#define VIDEO_FB_0_LAST_ADDRESS (0x08004C + VOYAGER_BASE) -#define VIDEO_PLANE_TL (0x080050 + VOYAGER_BASE) -#define VIDEO_PLANE_BR (0x080054 + VOYAGER_BASE) -#define VIDEO_SCALE (0x080058 + VOYAGER_BASE) -#define VIDEO_INITIAL_SCALE (0x08005C + VOYAGER_BASE) -#define VIDEO_YUV_CONSTANTS (0x080060 + VOYAGER_BASE) -#define VIDEO_FB_1_ADDRESS (0x080064 + VOYAGER_BASE) -#define VIDEO_FB_1_LAST_ADDRESS (0x080068 + VOYAGER_BASE) -#define VIDEO_ALPHA_DISPLAY_CTRL (0x080080 + VOYAGER_BASE) -#define VIDEO_ALPHA_FB_ADDRESS (0x080084 + VOYAGER_BASE) -#define VIDEO_ALPHA_FB_WIDTH (0x080088 + VOYAGER_BASE) -#define VIDEO_ALPHA_FB_LAST_ADDRESS (0x08008C + VOYAGER_BASE) -#define VIDEO_ALPHA_PLANE_TL (0x080090 + VOYAGER_BASE) -#define VIDEO_ALPHA_PLANE_BR (0x080094 + VOYAGER_BASE) -#define VIDEO_ALPHA_SCALE (0x080098 + VOYAGER_BASE) -#define VIDEO_ALPHA_INITIAL_SCALE (0x08009C + VOYAGER_BASE) -#define VIDEO_ALPHA_CHROMA_KEY (0x0800A0 + VOYAGER_BASE) -#define PANEL_HWC_ADDRESS (0x0800F0 + VOYAGER_BASE) -#define PANEL_HWC_LOCATION (0x0800F4 + VOYAGER_BASE) -#define PANEL_HWC_COLOR_12 (0x0800F8 + VOYAGER_BASE) -#define PANEL_HWC_COLOR_3 (0x0800FC + VOYAGER_BASE) -#define ALPHA_DISPLAY_CTRL (0x080100 + VOYAGER_BASE) -#define ALPHA_FB_ADDRESS (0x080104 + VOYAGER_BASE) -#define ALPHA_FB_WIDTH (0x080108 + VOYAGER_BASE) -#define ALPHA_PLANE_TL (0x08010C + VOYAGER_BASE) -#define ALPHA_PLANE_BR (0x080110 + VOYAGER_BASE) -#define ALPHA_CHROMA_KEY (0x080114 + VOYAGER_BASE) -#define CRT_DISPLAY_CTRL (0x080200 + VOYAGER_BASE) -#define CRT_FB_ADDRESS (0x080204 + VOYAGER_BASE) -#define CRT_FB_WIDTH (0x080208 + VOYAGER_BASE) -#define CRT_HORIZONTAL_TOTAL (0x08020C + VOYAGER_BASE) -#define CRT_HORIZONTAL_SYNC (0x080210 + VOYAGER_BASE) -#define CRT_VERTICAL_TOTAL (0x080214 + VOYAGER_BASE) -#define CRT_VERTICAL_SYNC (0x080218 + VOYAGER_BASE) -#define CRT_SIGNATURE_ANALYZER (0x08021C + VOYAGER_BASE) -#define CRT_CURRENT_LINE (0x080220 + VOYAGER_BASE) -#define CRT_MONITOR_DETECT (0x080224 + VOYAGER_BASE) -#define CRT_HWC_ADDRESS (0x080230 + VOYAGER_BASE) -#define CRT_HWC_LOCATION (0x080234 + VOYAGER_BASE) -#define CRT_HWC_COLOR_12 (0x080238 + VOYAGER_BASE) -#define CRT_HWC_COLOR_3 (0x08023C + VOYAGER_BASE) -#define CRT_PALETTE_RAM (0x080400 + VOYAGER_BASE) -#define PANEL_PALETTE_RAM (0x080800 + VOYAGER_BASE) -#define VIDEO_PALETTE_RAM (0x080C00 + VOYAGER_BASE) - -/* ----- 8051 Controle register ----------------------------------------- */ -#define VOYAGER_8051_BASE (0x000c0000 + VOYAGER_BASE) -#define VOYAGER_8051_RESET (0x000b0000 + VOYAGER_BASE) -#define VOYAGER_8051_SELECT (0x000b0004 + VOYAGER_BASE) -#define VOYAGER_8051_CPU_INT (0x000b000c + VOYAGER_BASE) - -/* ----- AC97 Controle register ----------------------------------------- */ -#define AC97_TX_SLOT0 (0x00000000 + VOYAGER_AC97_BASE) -#define AC97_CONTROL_STATUS (0x00000080 + VOYAGER_AC97_BASE) -#define AC97C_READ (1 << 19) -#define AC97C_WD_BIT (1 << 2) -#define AC97C_INDEX_MASK 0x7f - -/* arch/sh/cchips/voyagergx/consistent.c */ -void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); - -/* arch/sh/cchips/voyagergx/irq.c */ -void setup_voyagergx_irq(void); - -#endif /* _VOYAGER_GX_REG_H */ -- cgit v1.2.3-70-g09d2 From 03bbc0e6ba23700aea7fec801ac7e6c5a80f78f9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 15 Jan 2008 16:55:55 +0900 Subject: sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/irq-r7785rp.c | 45 ++++++++++++++++++++-------- include/asm-sh/r7780rp.h | 14 +++++++-- 2 files changed, 45 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index bbf18afc29a..af5ec74b2b1 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -2,7 +2,7 @@ * Renesas Solutions Highlander R7785RP Support. * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 - 2008 Paul Mundt * Copyright (C) 2007 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public @@ -17,31 +17,52 @@ enum { UNUSED = 0, - /* board specific interrupt sources */ - AX88796, /* Ethernet controller */ - CF, /* Compact Flash */ + /* FPGA specific interrupt sources */ + CF, /* Compact Flash */ + SMBUS, /* SMBUS */ + TP, /* Touch panel */ + RTC, /* RTC Alarm */ + TH_ALERT, /* Temperature sensor */ + AX88796, /* Ethernet controller */ + + /* external bus connector */ + EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7, }; static struct intc_vect vectors[] __initdata = { INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(RTC, IRQ_RTC), + INTC_IRQ(TH_ALERT, IRQ_TH_ALERT), + + INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1), + INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3), + + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7), + INTC_IRQ(AX88796, IRQ_AX88796), }; static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4000010, 0, 16, /* IRLMCR1 */ - { 0, 0, 0, 0, CF, AX88796, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 } }, + { 0, 0, 0, 0, CF, AX88796, SMBUS, TP, + RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } }, + { 0xa4000012, 0, 16, /* IRLMCR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, + EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } }, }; static unsigned char irl2irq[HL_NR_IRL] __initdata = { - 0, IRQ_CF, 0, 0, - 0, 0, 0, 0, - 0, 0, IRQ_AX88796, 0, - 0, 0, 0, + 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5, + IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP, + IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0, + IRQ_EXT1, IRQ_EXT2, IRQ_EXT3, }; static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, - NULL, mask_registers, NULL, NULL); + NULL, NULL, mask_registers, NULL, NULL); unsigned char * __init highlander_init_irq_r7785rp(void) { @@ -58,7 +79,7 @@ unsigned char * __init highlander_init_irq_r7785rp(void) ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ - ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */ + ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ register_intc_controller(&intc_desc); return irl2irq; diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index de37f933aa4..1c2d4d18fab 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -195,8 +195,18 @@ #ifndef IRQ_PSW #define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) #endif -#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 3) -#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 4) +#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) +#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) +#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) +#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) +#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) +#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) +#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) +#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) +#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) +#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) +#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) +#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) void make_r7780rp_irq(unsigned int irq); -- cgit v1.2.3-70-g09d2 From a5350a9686efa65cbd2ad4677bcb9372c7ad05c7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 19 Jan 2008 16:06:01 +0900 Subject: sh: Kill off dead HS771RVoIP board support. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 - arch/sh/Makefile | 1 - arch/sh/boards/renesas/hs7751rvoip/Kconfig | 12 - arch/sh/boards/renesas/hs7751rvoip/Makefile | 8 - arch/sh/boards/renesas/hs7751rvoip/io.c | 283 --------- arch/sh/boards/renesas/hs7751rvoip/irq.c | 116 ---- arch/sh/boards/renesas/hs7751rvoip/pci.c | 149 ----- arch/sh/boards/renesas/hs7751rvoip/setup.c | 105 ---- arch/sh/configs/hs7751rvoip_defconfig | 908 ---------------------------- arch/sh/drivers/pci/pci-auto.c | 2 - arch/sh/tools/mach-types | 1 - include/asm-sh/hs7751rvoip.h | 54 -- 12 files changed, 1646 deletions(-) delete mode 100644 arch/sh/boards/renesas/hs7751rvoip/Kconfig delete mode 100644 arch/sh/boards/renesas/hs7751rvoip/Makefile delete mode 100644 arch/sh/boards/renesas/hs7751rvoip/io.c delete mode 100644 arch/sh/boards/renesas/hs7751rvoip/irq.c delete mode 100644 arch/sh/boards/renesas/hs7751rvoip/pci.c delete mode 100644 arch/sh/boards/renesas/hs7751rvoip/setup.c delete mode 100644 arch/sh/configs/hs7751rvoip_defconfig delete mode 100644 include/asm-sh/hs7751rvoip.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ddbd610d27e..85bd9ac6f5e 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -440,13 +440,6 @@ config SH_SECUREEDGE5410 This includes both the OEM SecureEdge products as well as the SME product line. -config SH_HS7751RVOIP - bool "HS7751RVOIP" - depends on CPU_SUBTYPE_SH7751R - help - Select HS7751RVOIP if configuring for a Renesas Technology - Sales VoIP board. - config SH_7710VOIPGW bool "SH7710-VOIP-GW" depends on CPU_SUBTYPE_SH7710 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index e04b1929365..21cc649e1c1 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -112,7 +112,6 @@ machdir-$(CONFIG_SH_DREAMCAST) += dreamcast machdir-$(CONFIG_SH_MPC1211) += mpc1211 machdir-$(CONFIG_SH_SH03) += sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig deleted file mode 100644 index 1743be477be..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if SH_HS7751RVOIP - -menu "HS7751RVoIP options" - -config HS7751RVOIP_CODEC - bool "Support VoIP Codec section" - help - Selecting this option will support CODEC section. - -endmenu - -endif diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile deleted file mode 100644 index e626377c55e..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the HS7751RVoIP specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_PCI) += pci.o - diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c deleted file mode 100644 index bb9aa0d6285..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/io.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/hs7751rvoip/io.c - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Renesas Technology sales HS7751RVoIP - * - * Initial version only to support LAN access; some - * placeholder code from io_hs7751rvoip.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include -#include -#include -#include -#include -#include -#include - -extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ -extern void *area5_io16_base; /* Area 5 16bit I/O Base address */ - -/* - * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define CODEC_IO_BASE 0x1000 -#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE)) - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return ((unsigned long)area5_io16_base + 0x0c); - else - return ((unsigned long)area5_io16_base + 0x800 + - ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - return port; -} - -/* The 7751R HS7751RVoIP seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -#if defined(CONFIG_HS7751RVOIP_CODEC) -#define codec_port(port) \ - ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20))) -#else -#define codec_port(port) (0) -#endif - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char hs7751rvoip_inb(unsigned long port) -{ - if (PXSEG(port)) - return ctrl_inb(port); - else if (codec_port(port)) - return ctrl_inb(CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - return ctrl_inb(pci_ioaddr(port)); - else - return ctrl_inw(port2adr(port)) & 0xff; -} - -unsigned char hs7751rvoip_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = ctrl_inb(port); - else if (codec_port(port)) - v = ctrl_inb(CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - v = ctrl_inb(pci_ioaddr(port)); - else - v = ctrl_inw(port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -unsigned short hs7751rvoip_inw(unsigned long port) -{ - if (PXSEG(port)) - return ctrl_inw(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - return ctrl_inw(pci_ioaddr(port)); - else - maybebadio(port); - return 0; -} - -unsigned int hs7751rvoip_inl(unsigned long port) -{ - if (PXSEG(port)) - return ctrl_inl(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - return ctrl_inl(pci_ioaddr(port)); - else - maybebadio(port); - return 0; -} - -void hs7751rvoip_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - ctrl_outb(value, port); - else if (codec_port(port)) - ctrl_outb(value, CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outb(value, pci_ioaddr(port)); - else - ctrl_outb(value, port2adr(port)); -} - -void hs7751rvoip_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - ctrl_outb(value, port); - else if (codec_port(port)) - ctrl_outb(value, CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outb(value, pci_ioaddr(port)); - else - ctrl_outw(value, port2adr(port)); - - ctrl_delay(); -} - -void hs7751rvoip_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - ctrl_outw(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outw(value, pci_ioaddr(port)); - else - maybebadio(port); -} - -void hs7751rvoip_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - ctrl_outl(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outl(value, pci_ioaddr(port)); - else - maybebadio(port); -} - -void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count) -{ - u8 *buf = addr; - - if (PXSEG(port)) - while (count--) - *buf++ = ctrl_inb(port); - else if (codec_port(port)) - while (count--) - *buf++ = ctrl_inb(CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); - - while (count--) - *buf++ = *bp; - } else { - volatile u16 *p = (volatile u16 *)port2adr(port); - - while (count--) - *buf++ = *p & 0xff; - } -} - -void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile u16 *p; - u16 *buf = addr; - - if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile u16 *)pci_ioaddr(port); - else - p = (volatile u16 *)port2adr(port); - while (count--) - *buf++ = *p; -} - -void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count) -{ - - if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); - u32 *buf = addr; - - while (count--) - *buf++ = *p; - } else - maybebadio(port); -} - -void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count) -{ - const u8 *buf = addr; - - if (PXSEG(port)) - while (count--) - ctrl_outb(*buf++, port); - else if (codec_port(port)) - while (count--) - ctrl_outb(*buf++, CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); - - while (count--) - *bp = *buf++; - } else { - volatile u16 *p = (volatile u16 *)port2adr(port); - - while (count--) - *p = *buf++; - } -} - -void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile u16 *p; - const u16 *buf = addr; - - if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile u16 *)pci_ioaddr(port); - else - p = (volatile u16 *)port2adr(port); - - while (count--) - *p = *buf++; -} - -void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count) -{ - const u32 *buf = addr; - - if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); - - while (count--) - *p = *buf++; - } else - maybebadio(port); -} - -void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size) -{ - if (PXSEG(port)) - return (void __iomem *)port; - else if (unlikely(codec_port(port) && (size == 1))) - return (void __iomem *)CODEC_IOMAP(port); - else if (is_pci_ioaddr(port)) - return (void __iomem *)pci_ioaddr(port); - - return (void __iomem *)port2adr(port); -} diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c deleted file mode 100644 index e55c6686b21..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/hs7751rvoip/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Renesas Technology Sales HS7751RVoIP Support. - * - * Modified for HS7751RVoIP by - * Atom Create Engineering Co., Ltd. 2002. - * Lineo uSolutions, Inc. 2003. - */ - -#include -#include -#include -#include -#include -#include - -static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7}; - -static void enable_hs7751rvoip_irq(unsigned int irq); -static void disable_hs7751rvoip_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq - -static void ack_hs7751rvoip_irq(unsigned int irq); -static void end_hs7751rvoip_irq(unsigned int irq); - -static unsigned int startup_hs7751rvoip_irq(unsigned int irq) -{ - enable_hs7751rvoip_irq(irq); - return 0; /* never anything pending */ -} - -static void disable_hs7751rvoip_irq(unsigned int irq) -{ - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR3); - val &= mask; - ctrl_outw(val, IRLCNTR3); -} - -static void enable_hs7751rvoip_irq(unsigned int irq) -{ - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR3); - val |= value; - ctrl_outw(val, IRLCNTR3); -} - -static void ack_hs7751rvoip_irq(unsigned int irq) -{ - disable_hs7751rvoip_irq(irq); -} - -static void end_hs7751rvoip_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_hs7751rvoip_irq(irq); -} - -static struct hw_interrupt_type hs7751rvoip_irq_type = { - .typename = "HS7751RVoIP IRQ", - .startup = startup_hs7751rvoip_irq, - .shutdown = shutdown_hs7751rvoip_irq, - .enable = enable_hs7751rvoip_irq, - .disable = disable_hs7751rvoip_irq, - .ack = ack_hs7751rvoip_irq, - .end = end_hs7751rvoip_irq, -}; - -static void make_hs7751rvoip_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &hs7751rvoip_irq_type; - disable_hs7751rvoip_irq(irq); -} - -/* - * Initialize IRQ setting - */ -void __init init_hs7751rvoip_IRQ(void) -{ - int i; - - /* IRL0=ON HOOK1 - * IRL1=OFF HOOK1 - * IRL2=ON HOOK2 - * IRL3=OFF HOOK2 - * IRL4=Ringing Detection - * IRL5=CODEC - * IRL6=Ethernet - * IRL7=Ethernet Hub - * IRL8=USB Communication - * IRL9=USB Connection - * IRL10=USB DMA - * IRL11=CF Card - * IRL12=PCMCIA - * IRL13=PCI Slot - */ - ctrl_outw(0x9876, IRLCNTR1); - ctrl_outw(0xdcba, IRLCNTR2); - ctrl_outw(0x0050, IRLCNTR4); - ctrl_outw(0x4321, IRLCNTR5); - - for (i=0; i<14; i++) - make_hs7751rvoip_irq(i); -} diff --git a/arch/sh/boards/renesas/hs7751rvoip/pci.c b/arch/sh/boards/renesas/hs7751rvoip/pci.c deleted file mode 100644 index 1c0ddee30d2..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/pci.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/hs7751rvoip/pci.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas SH7751R HS7751RVoIP board - */ - -#include -#include -#include -#include -#include -#include - -#include -#include "../../../drivers/pci/pci-sh7751.h" -#include - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -/* - * Only long word accesses of the PCIC's internal local registers and the - * configuration registers from the CPU is supported. - */ -#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) -#define PCIC_READ(x) readl(PCI_REG(x)) - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - unsigned long bcr1, wcr1, wcr2, wcr3, mcr; - unsigned short bcr2, bcr3; - - /* - * Initialize the slave bus controller on the pcic. The values used - * here should not be hardcoded, but they should be taken from the bsc - * on the processor, to make this function as generic as possible. - * (i.e. Another sbc may usr different SDRAM timing settings -- in order - * for the pcic to work, its settings need to be exactly the same.) - */ - bcr1 = (*(volatile unsigned long *)(SH7751_BCR1)); - bcr2 = (*(volatile unsigned short *)(SH7751_BCR2)); - bcr3 = (*(volatile unsigned short *)(SH7751_BCR3)); - wcr1 = (*(volatile unsigned long *)(SH7751_WCR1)); - wcr2 = (*(volatile unsigned long *)(SH7751_WCR2)); - wcr3 = (*(volatile unsigned long *)(SH7751_WCR3)); - mcr = (*(volatile unsigned long *)(SH7751_MCR)); - - bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ - (*(volatile unsigned long *)(SH7751_BCR1)) = bcr1; - - bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ - PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ - PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */ - PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ - PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ - PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ - - /* Enable all interrupts, so we know what to fix */ - PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); - PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); - - /* Set up standard PCI config registers */ - PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */ - PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ - PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ - PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ - PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ - PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ - PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ - PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ - PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ - PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ - - /* Now turn it on... */ - PCIC_WRITE(SH7751_PCICR, 0xa5000001); - - /* - * Set PCIMBR and PCIIOBR here, assuming a single window - * (16M MEM, 256K IO) is enough. If a larger space is - * needed, the readx/writex and inx/outx functions will - * have to do more (e.g. setting registers for each call). - */ - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use ifdef to - * catch erroneous assumption. - */ - BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - - PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); - - /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); - - /* All done, may as well say so... */ - printk("SH7751R PCI: Finished initialization of the PCI controller\n"); - - return 1; -} - -int __init pcibios_map_platform_irq(u8 slot, u8 pin) -{ - switch (slot) { - case 0: return IRQ_PCISLOT; /* PCI Extend slot */ - case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */ - case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */ - case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */ - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } -} - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = 0x4000, - .end = 0x4000 + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c deleted file mode 100644 index c05625975f2..00000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Renesas Technology Sales HS7751RVoIP Support. - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Modified for HS7751RVoIP by - * Atom Create Engineering Co., Ltd. 2002. - * Lineo uSolutions, Inc. 2003. - */ -#include -#include -#include -#include -#include -#include -#include - -static void hs7751rvoip_power_off(void) -{ - ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR); -} - -void *area5_io8_base; -void *area6_io8_base; -void *area5_io16_base; -void *area6_io16_base; - -static int __init hs7751rvoip_cf_init(void) -{ - pgprot_t prot; - unsigned long paddrbase; - - /* open I/O area window */ - paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800)); - prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16); - area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!area5_io16_base) { - printk("allocate_cf_area : can't open CF I/O window!\n"); - return -ENOMEM; - } - - /* XXX : do we need attribute and common-memory area also? */ - - paddrbase = virt_to_phys((void *)PA_AREA6_IO); -#if defined(CONFIG_HS7751RVOIP_CODEC) - prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8); -#else - prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8); -#endif - area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!area6_io8_base) { - printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n"); - return -ENOMEM; - } - prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16); - area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!area6_io16_base) { - printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n"); - return -ENOMEM; - } - - return 0; -} -device_initcall(hs7751rvoip_cf_init); - -/* - * Initialize the board - */ -static void __init hs7751rvoip_setup(char **cmdline_p) -{ - ctrl_outb(0xf0, PA_OUTPORTR); - pm_power_off = hs7751rvoip_power_off; - - printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); -} - -static struct sh_machine_vector mv_hs7751rvoip __initmv = { - .mv_name = "HS7751RVoIP", - .mv_setup = hs7751rvoip_setup, - .mv_nr_irqs = 72, - - .mv_inb = hs7751rvoip_inb, - .mv_inw = hs7751rvoip_inw, - .mv_inl = hs7751rvoip_inl, - .mv_outb = hs7751rvoip_outb, - .mv_outw = hs7751rvoip_outw, - .mv_outl = hs7751rvoip_outl, - - .mv_inb_p = hs7751rvoip_inb_p, - .mv_inw_p = hs7751rvoip_inw, - .mv_inl_p = hs7751rvoip_inl, - .mv_outb_p = hs7751rvoip_outb_p, - .mv_outw_p = hs7751rvoip_outw, - .mv_outl_p = hs7751rvoip_outl, - - .mv_insb = hs7751rvoip_insb, - .mv_insw = hs7751rvoip_insw, - .mv_insl = hs7751rvoip_insl, - .mv_outsb = hs7751rvoip_outsb, - .mv_outsw = hs7751rvoip_outsw, - .mv_outsl = hs7751rvoip_outsl, - - .mv_init_irq = init_hs7751rvoip_IRQ, - .mv_ioport_map = hs7751rvoip_ioport_map, -}; diff --git a/arch/sh/configs/hs7751rvoip_defconfig b/arch/sh/configs/hs7751rvoip_defconfig deleted file mode 100644 index 5d9da5a0275..00000000000 --- a/arch/sh/configs/hs7751rvoip_defconfig +++ /dev/null @@ -1,908 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 13:04:52 2006 -# -CONFIG_SUPERH=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System type -# -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -CONFIG_SH_HS7751RVOIP=y -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# -CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set -# CONFIG_CPU_SUBTYPE_SH7705 is not set -# CONFIG_CPU_SUBTYPE_SH7706 is not set -# CONFIG_CPU_SUBTYPE_SH7707 is not set -# CONFIG_CPU_SUBTYPE_SH7708 is not set -# CONFIG_CPU_SUBTYPE_SH7709 is not set -# CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7750 is not set -# CONFIG_CPU_SUBTYPE_SH7091 is not set -# CONFIG_CPU_SUBTYPE_SH7750R is not set -# CONFIG_CPU_SUBTYPE_SH7750S is not set -# CONFIG_CPU_SUBTYPE_SH7751 is not set -CONFIG_CPU_SUBTYPE_SH7751R=y -# CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7770 is not set -# CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set -# CONFIG_CPU_SUBTYPE_SH7343 is not set - -# -# Memory management options -# -CONFIG_MMU=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_MEMORY_START=0x0c000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_VSYSCALL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set - -# -# Cache configuration -# -# CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set - -# -# Processor features -# -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set -# CONFIG_SH_STORE_QUEUES is not set -CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_SR_RB=y - -# -# Timer support -# -CONFIG_SH_TMU=y - -# -# HS7751RVoIP options -# -CONFIG_HS7751RVOIP_CODEC=y -CONFIG_SH_PCLK_FREQ=60000000 - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# DMA support -# -# CONFIG_SH_DMA is not set - -# -# Companion Chips -# -# CONFIG_HD6446X_SERIES is not set - -# -# Kernel features -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y - -# -# Boot options -# -CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=64M console=ttySC1,115200 root=/dev/hda1" - -# -# Bus options -# -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_MULTIPLE_TABLES is not set -# CONFIG_IP_ROUTE_MULTIPATH is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=1 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_STNIC is not set -# CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=2 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index 224e007736f..ea404704ace 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -516,10 +516,8 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) PCI_COMMAND, cmdstat | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) early_write_config_byte(hose, top_bus, current_bus, pci_devfn, PCI_LATENCY_TIMER, 0x80); -#endif /* Allocate PCI I/O and/or memory space */ pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index af4b7aa9a6b..25810670a0f 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -29,7 +29,6 @@ HP6XX SH_HP6XX DREAMCAST SH_DREAMCAST MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 -HS7751RVOIP SH_HS7751RVOIP EDOSK7705 SH_EDOSK7705 SH4202_MICRODEV SH_SH4202_MICRODEV SH03 SH_SH03 diff --git a/include/asm-sh/hs7751rvoip.h b/include/asm-sh/hs7751rvoip.h deleted file mode 100644 index c4cff9d3392..00000000000 --- a/include/asm-sh/hs7751rvoip.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H -#define __ASM_SH_RENESAS_HS7751RVOIP_H - -/* - * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h - * - * Copyright (C) 2000 Atom Create Engineering Co., Ltd. - * - * Renesas Technology Sales HS7751RVoIP support - */ - -/* Box specific addresses. */ - -#define PA_BCR 0xa4000000 /* FPGA */ -#define PA_SLICCNTR1 0xa4000006 /* SLIC PIO Control 1 */ -#define PA_SLICCNTR2 0xa4000008 /* SLIC PIO Control 2 */ -#define PA_DMACNTR 0xa400000a /* USB DMA Control */ -#define PA_INPORTR 0xa400000c /* Input Port Register */ -#define PA_OUTPORTR 0xa400000e /* Output Port Reguster */ -#define PA_VERREG 0xa4000014 /* FPGA Version Register */ - -#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ - -#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ -#define IRLCNTR2 (PA_BCR + 2) /* Interrupt Control Register2 */ -#define IRLCNTR3 (PA_BCR + 4) /* Interrupt Control Register3 */ -#define IRLCNTR4 (PA_BCR + 16) /* Interrupt Control Register4 */ -#define IRLCNTR5 (PA_BCR + 18) /* Interrupt Control Register5 */ - -#define IRQ_PCIETH 6 /* PCI Ethernet IRQ */ -#define IRQ_PCIHUB 7 /* PCI Ethernet Hub IRQ */ -#define IRQ_USBCOM 8 /* USB Comunication IRQ */ -#define IRQ_USBCON 9 /* USB Connect IRQ */ -#define IRQ_USBDMA 10 /* USB DMA IRQ */ -#define IRQ_CFCARD 11 /* CF Card IRQ */ -#define IRQ_PCMCIA 12 /* PCMCIA IRQ */ -#define IRQ_PCISLOT 13 /* PCI Slot #1 IRQ */ -#define IRQ_ONHOOK1 0 /* ON HOOK1 IRQ */ -#define IRQ_OFFHOOK1 1 /* OFF HOOK1 IRQ */ -#define IRQ_ONHOOK2 2 /* ON HOOK2 IRQ */ -#define IRQ_OFFHOOK2 3 /* OFF HOOK2 IRQ */ -#define IRQ_RINGING 4 /* Ringing IRQ */ -#define IRQ_CODEC 5 /* CODEC IRQ */ - -#define __IO_PREFIX hs7751rvoip -#include - -/* arch/sh/boards/renesas/hs7751rvoip/irq.c */ -void init_hs7751rvoip_IRQ(void); - -/* arch/sh/boards/renesas/hs7751rvoip/io.c */ -void *hs7751rvoip_ioremap(unsigned long, unsigned long); - -#endif /* __ASM_SH_RENESAS_HS7751RVOIP */ -- cgit v1.2.3-70-g09d2 From 4862ec073975e28f432f164405e60fa6f5c9d071 Mon Sep 17 00:00:00 2001 From: Nicholas Beck Date: Wed, 23 Jan 2008 12:50:51 +0900 Subject: sh: Add support for SDK7780 board. Add support for Renesas Technology Europe SDK7780 board. Signed-off-by: Nicholas Beck Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 9 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sdk7780/Kconfig | 23 + arch/sh/boards/renesas/sdk7780/Makefile | 5 + arch/sh/boards/renesas/sdk7780/irq.c | 46 + arch/sh/boards/renesas/sdk7780/setup.c | 109 +++ arch/sh/configs/sdk7780_defconfig | 1394 +++++++++++++++++++++++++++++++ arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/fixups-sdk7780.c | 59 ++ arch/sh/drivers/pci/ops-sdk7780.c | 73 ++ include/asm-sh/sdk7780.h | 81 ++ 11 files changed, 1801 insertions(+) create mode 100644 arch/sh/boards/renesas/sdk7780/Kconfig create mode 100644 arch/sh/boards/renesas/sdk7780/Makefile create mode 100644 arch/sh/boards/renesas/sdk7780/irq.c create mode 100644 arch/sh/boards/renesas/sdk7780/setup.c create mode 100644 arch/sh/configs/sdk7780_defconfig create mode 100644 arch/sh/drivers/pci/fixups-sdk7780.c create mode 100644 arch/sh/drivers/pci/ops-sdk7780.c create mode 100644 include/asm-sh/sdk7780.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index e94430b4247..1cd9c8fd927 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -455,6 +455,14 @@ config SH_RTS7751R2D Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. +config SH_SDK7780 + bool "SDK7780R3" + depends on CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + help + Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 + evaluation board. + config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 @@ -520,6 +528,7 @@ endmenu source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" +source "arch/sh/boards/renesas/sdk7780/Kconfig" source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 4cc71094efe..17fc36186bf 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -116,6 +116,7 @@ machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp +machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/renesas/sdk7780/Kconfig new file mode 100644 index 00000000000..e4f5b6985be --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/Kconfig @@ -0,0 +1,23 @@ +if SH_SDK7780 + +choice + prompt "SDK7780 options" + default SH_SDK7780_BASE + +config SH_SDK7780_STANDALONE + bool "SDK7780 board support" + depends on CPU_SUBTYPE_SH7780 + help + Selecting this option will enable support for the + standalone version of the SDK7780. If in doubt, say Y. + +config SH_SDK7780_BASE + bool "SDK7780 with base-board support" + depends on CPU_SUBTYPE_SH7780 + help + Selecting this option will enable support for the expansion + baseboard devices. If in doubt, say Y. + +endchoice + +endif diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/renesas/sdk7780/Makefile new file mode 100644 index 00000000000..3d8f0befc35 --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the SDK7780 specific parts of the kernel +# +obj-y := setup.o irq.o + diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/renesas/sdk7780/irq.c new file mode 100644 index 00000000000..87cdc578f6f --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/irq.c @@ -0,0 +1,46 @@ +/* + * linux/arch/sh/boards/renesas/sdk7780/irq.c + * + * Renesas Technology Europe SDK7780 Support. + * + * Copyright (C) 2008 Nicholas Beck + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +enum { + UNUSED = 0, + /* board specific interrupt sources */ + SMC91C111, /* Ethernet controller */ +}; + +static struct intc_vect fpga_vectors[] __initdata = { + INTC_IRQ(SMC91C111, IRQ_ETHERNET), +}; + +static struct intc_mask_reg fpga_mask_registers[] __initdata = { + { 0, FPGA_IRQ0MR, 16, + { 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, SMC91C111, 0, 0, 0, 0 } }, +}; + +static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors, + NULL, fpga_mask_registers, NULL, NULL); + +void __init init_sdk7780_IRQ(void) +{ + printk(KERN_INFO "Using SDK7780 interrupt controller.\n"); + + ctrl_outw(0xFFFF, FPGA_IRQ0MR); + /* Setup IRL 0-3 */ + ctrl_outw(0x0003, FPGA_IMSR); + plat_irq_setup_pins(IRQ_MODE_IRL3210); + + register_intc_controller(&fpga_intc_desc); +} diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/renesas/sdk7780/setup.c new file mode 100644 index 00000000000..5df32f20187 --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/setup.c @@ -0,0 +1,109 @@ +/* + * arch/sh/boards/renesas/sdk7780/setup.c + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GPIO_PECR 0xFFEA0008 + +//* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +/* SMC91x */ +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "smc91x-regs" , + .start = PA_LAN + 0x300, + .end = PA_LAN + 0x300 + 0x10 , + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ETHERNET, + .end = IRQ_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .id = 0, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, +}; + +static struct platform_device *sdk7780_devices[] __initdata = { + &heartbeat_device, + &smc91x_eth_device, +}; + +static int __init sdk7780_devices_setup(void) +{ + return platform_add_devices(sdk7780_devices, + ARRAY_SIZE(sdk7780_devices)); +} +device_initcall(sdk7780_devices_setup); + +static void __init sdk7780_setup(char **cmdline_p) +{ + u16 ver = ctrl_inw(FPGA_FPVERR); + u16 dateStamp = ctrl_inw(FPGA_FPDATER); + + printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n"); + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d), datestamp : %d\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf, + dateStamp); + + /* Setup pin mux'ing for PCIC */ + ctrl_outw(0x0000, GPIO_PECR); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_se7780 __initmv = { + .mv_name = "Renesas SDK7780-R3" , + .mv_setup = sdk7780_setup, + .mv_nr_irqs = 111, + .mv_init_irq = init_sdk7780_IRQ, +}; + diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig new file mode 100644 index 00000000000..bb9bcd6591a --- /dev/null +++ b/arch/sh/configs/sdk7780_defconfig @@ -0,0 +1,1394 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 22 11:34:03 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="_SDK7780" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_RELAY=y +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +CONFIG_CPU_SUBTYPE_SH7780=y +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_PMB is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +# CONFIG_SPECULATIVE_EXECUTION is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_7780_SOLUTION_ENGINE is not set +CONFIG_SH_SDK7780=y +# CONFIG_SH_HIGHLANDER is not set +# CONFIG_SH_SDK7780_STANDALONE is not set +CONFIG_SH_SDK7780_BASE=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA_API=y +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=12 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x01800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_PCI_DEBUG=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_POLICE is not set +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_PARPORT=y +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_PLATFORM=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_SMC91X=y +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NET_POCKET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_SUPERH_MONO=y +CONFIG_LOGO_SUPERH_VGA16=y +CONFIG_LOGO_SUPERH_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +CONFIG_NTFS_DEBUG=y +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 1086cf111f8..7bf2a2c823f 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o +obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c new file mode 100644 index 00000000000..2f8863099dd --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -0,0 +1,59 @@ +/* + * arch/sh/drivers/pci/fixups-sdk7780.c + * + * PCI fixups for the SDK7780SE03 + * + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include "pci-sh4.h" +#include + +int pci_fixup_pcic(void) +{ + ctrl_outl(0x00000001, SH7780_PCI_VCR2); + + /* Enable all interrupts, so we know what to fix */ + pci_write_reg(0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(0x0000380F, SH7780_PCIAINTM); + + /* Set up standard PCI config registers */ + pci_write_reg(0xFB00, SH7780_PCISTATUS); + pci_write_reg(0x0047, SH7780_PCICMD); + pci_write_reg(0x00, SH7780_PCIPIF); + pci_write_reg(0x00, SH7780_PCISUB); + pci_write_reg(0x06, SH7780_PCIBCC); + pci_write_reg(0x1912, SH7780_PCISVID); + pci_write_reg(0x0001, SH7780_PCISID); + + pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + + pci_write_reg(0x00000000, SH7780_PCIMBAR1); + pci_write_reg(0x00000000, SH7780_PCILAR1); + pci_write_reg(0x00000000, SH7780_PCILSR1); + + pci_write_reg(0xAB000801, SH7780_PCIIBAR); + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use ifdef to + * catch erroneous assumption. + */ + pci_write_reg(0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + + /* Set IOBR for window containing area specified in pci.h */ + pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); + pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + + pci_write_reg(0xA5000C01, SH7780_PCICR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c new file mode 100644 index 00000000000..66a9b4047f2 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -0,0 +1,73 @@ +/* + * linux/arch/sh/drivers/pci/ops-sdk7780.c + * + * Copyright (C) 2006 Nobuhiro Iwamatsu + * + * PCI initialization for the SDK7780SE03 + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ +static char sdk7780_irq_tab[4][16] __initdata = { + /* INTA */ + { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTB */ + { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTC */ + { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTD */ + { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return sdk7780_irq_tab[pin-1][slot]; +} + +static struct resource sdk7780_io_resource = { + .name = "SH7780_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sdk7780_mem_resource = { + .name = "SH7780_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sdk7780_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); + return sh7780_pcic_init(&sdk7780_pci_map); +} diff --git a/include/asm-sh/sdk7780.h b/include/asm-sh/sdk7780.h new file mode 100644 index 00000000000..697dc865f21 --- /dev/null +++ b/include/asm-sh/sdk7780.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_RENESAS_SDK7780_H +#define __ASM_SH_RENESAS_SDK7780_H + +/* + * linux/include/asm-sh/sdk7780.h + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa0800000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ + +#define PA_PERIPHERAL PA_AREA5_IO + +/* SRAM/Reserved */ +#define PA_RESERVED (PA_PERIPHERAL + 0) +/* FPGA base address */ +#define PA_FPGA (PA_PERIPHERAL + 0x01000000) +/* SMC LAN91C111 */ +#define PA_LAN (PA_PERIPHERAL + 0x01800000) + + +#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ +#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ +#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ +#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ +#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ +#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ +#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ +#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ +#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ +#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ +#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ +#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ +#define PA_LED FPGA_SLEDR +#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ +#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ +#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ +#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ +#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ +#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ +#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ +#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ +#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ +#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ +#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ +#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ + + +#define SDK7780_NR_IRL 15 +/* IDE/ATA interrupt */ +#define IRQ_CFCARD 14 +/* SMC interrupt */ +#define IRQ_ETHERNET 6 + + +/* arch/sh/boards/renesas/sdk7780/irq.c */ +void init_sdk7780_IRQ(void); + +#define __IO_PREFIX sdk7780 +#include + +#endif /* __ASM_SH_RENESAS_SDK7780_H */ -- cgit v1.2.3-70-g09d2 From f93e97eaead5c50af35d73cca7301ebbfdff116c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 24 Jan 2008 18:35:10 +0900 Subject: sh: declared coherent memory support V2 This patch adds declared coherent memory support to the sh architecture. All functions are based on the x86 implementation. Header files are adjusted to use the new functions instead of the former consistent_alloc() code. This version includes the few changes what were included in the fix patch together with modifications based on feedback from Paul. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/consistent.c | 174 +++++++++++++++++++++++++++++++------------ include/asm-sh/dma-mapping.h | 56 +++++--------- 2 files changed, 148 insertions(+), 82 deletions(-) (limited to 'include') diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 65ad30031ad..7b2131c9eed 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -3,6 +3,8 @@ * * Copyright (C) 2004 - 2007 Paul Mundt * + * Declared coherent memory functions based on arch/x86/kernel/pci-dma_32.c + * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -13,66 +15,146 @@ #include #include -void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) -{ - struct page *page, *end, *free; - void *ret, *vp; - int order; - - size = PAGE_ALIGN(size); - order = get_order(size); +struct dma_coherent_mem { + void *virt_base; + u32 device_base; + int size; + int flags; + unsigned long *bitmap; +}; - page = alloc_pages(gfp, order); - if (!page) - return NULL; - split_page(page, order); +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp) +{ + void *ret; + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); + + if (mem) { + int page = bitmap_find_free_region(mem->bitmap, mem->size, + order); + if (page >= 0) { + *dma_handle = mem->device_base + (page << PAGE_SHIFT); + ret = mem->virt_base + (page << PAGE_SHIFT); + memset(ret, 0, size); + return ret; + } + if (mem->flags & DMA_MEMORY_EXCLUSIVE) + return NULL; + } - ret = page_address(page); - *handle = virt_to_phys(ret); + ret = (void *)__get_free_pages(gfp, order); - vp = ioremap_nocache(*handle, size); - if (!vp) { - free_pages((unsigned long)ret, order); - return NULL; + if (ret != NULL) { + memset(ret, 0, size); + /* + * Pages from the page allocator may have data present in + * cache. So flush the cache before using uncached memory. + */ + dma_cache_sync(NULL, ret, size, DMA_BIDIRECTIONAL); + *dma_handle = virt_to_phys(ret); } + return ret; +} +EXPORT_SYMBOL(dma_alloc_coherent); - memset(vp, 0, size); - - /* - * We must flush the cache before we pass it on to the device - */ - dma_cache_sync(NULL, ret, size, DMA_BIDIRECTIONAL); +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); - page = virt_to_page(ret); - free = page + (size >> PAGE_SHIFT); - end = page + (1 << order); + if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { + int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; - while (++page < end) { - /* Free any unused pages */ - if (page >= free) { - __free_page(page); - } + bitmap_release_region(mem->bitmap, page, order); + } else { + WARN_ON(irqs_disabled()); /* for portability */ + BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE); + free_pages((unsigned long)vaddr, order); } - - return vp; } -EXPORT_SYMBOL(consistent_alloc); +EXPORT_SYMBOL(dma_free_coherent); -void consistent_free(void *vaddr, size_t size, dma_addr_t dma_handle) +int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags) { - struct page *page; - unsigned long addr; - - addr = (unsigned long)phys_to_virt((unsigned long)dma_handle); - page = virt_to_page(addr); + void __iomem *mem_base = NULL; + int pages = size >> PAGE_SHIFT; + int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long); + + if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) + goto out; + if (!size) + goto out; + if (dev->dma_mem) + goto out; + + /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ + + mem_base = ioremap_nocache(bus_addr, size); + if (!mem_base) + goto out; + + dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); + if (!dev->dma_mem) + goto out; + dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!dev->dma_mem->bitmap) + goto free1_out; + + dev->dma_mem->virt_base = mem_base; + dev->dma_mem->device_base = device_addr; + dev->dma_mem->size = pages; + dev->dma_mem->flags = flags; + + if (flags & DMA_MEMORY_MAP) + return DMA_MEMORY_MAP; + + return DMA_MEMORY_IO; + + free1_out: + kfree(dev->dma_mem); + out: + if (mem_base) + iounmap(mem_base); + return 0; +} +EXPORT_SYMBOL(dma_declare_coherent_memory); - free_pages(addr, get_order(size)); +void dma_release_declared_memory(struct device *dev) +{ + struct dma_coherent_mem *mem = dev->dma_mem; + + if (!mem) + return; + dev->dma_mem = NULL; + iounmap(mem->virt_base); + kfree(mem->bitmap); + kfree(mem); +} +EXPORT_SYMBOL(dma_release_declared_memory); - iounmap(vaddr); +void *dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size) +{ + struct dma_coherent_mem *mem = dev->dma_mem; + int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; + int pos, err; + + if (!mem) + return ERR_PTR(-EINVAL); + + pos = (device_addr - mem->device_base) >> PAGE_SHIFT; + err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); + if (err != 0) + return ERR_PTR(err); + return mem->virt_base + (pos << PAGE_SHIFT); } -EXPORT_SYMBOL(consistent_free); +EXPORT_SYMBOL(dma_mark_declared_memory_occupied); -void consistent_sync(void *vaddr, size_t size, int direction) +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) { #ifdef CONFIG_CPU_SH5 void *p1addr = vaddr; @@ -94,4 +176,4 @@ void consistent_sync(void *vaddr, size_t size, int direction) BUG(); } } -EXPORT_SYMBOL(consistent_sync); +EXPORT_SYMBOL(dma_cache_sync); diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h index 20ae762e525..22cc419389f 100644 --- a/include/asm-sh/dma-mapping.h +++ b/include/asm-sh/dma-mapping.h @@ -8,11 +8,6 @@ extern struct bus_type pci_bus_type; -/* arch/sh/mm/consistent.c */ -extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle); -extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle); -extern void consistent_sync(void *vaddr, size_t size, int direction); - #define dma_supported(dev, mask) (1) static inline int dma_set_mask(struct device *dev, u64 mask) @@ -25,44 +20,19 @@ static inline int dma_set_mask(struct device *dev, u64 mask) return 0; } -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - if (sh_mv.mv_consistent_alloc) { - void *ret; +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); - ret = sh_mv.mv_consistent_alloc(dev, size, dma_handle, flag); - if (ret != NULL) - return ret; - } - - return consistent_alloc(flag, size, dma_handle); -} - -static inline void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - if (sh_mv.mv_consistent_free) { - int ret; - - ret = sh_mv.mv_consistent_free(dev, size, vaddr, dma_handle); - if (ret == 0) - return; - } +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); - consistent_free(vaddr, size, dma_handle); -} +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir); #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) #define dma_is_consistent(d, h) (1) -static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction dir) -{ - consistent_sync(vaddr, size, (int)dir); -} - static inline dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction dir) @@ -205,4 +175,18 @@ static inline int dma_mapping_error(dma_addr_t dma_addr) { return dma_addr == 0; } + +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY + +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); + #endif /* __ASM_SH_DMA_MAPPING_H */ -- cgit v1.2.3-70-g09d2 From d4dca67bc2fd6caa4df3db28b6424841b95fde88 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 24 Jan 2008 18:45:45 +0900 Subject: sh: remove consistent alloc stuff from the machine vector Now with the voyagergx cruft gone and the dreamcast using declared coherent memory for pci there are no users of the consistent alloc and free functions pointers in the machine vector. So this little patch simply removes these function pointers from the macvec. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/asm-sh/machvec.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include') diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h index 088698bacf2..ddb18ad2330 100644 --- a/include/asm-sh/machvec.h +++ b/include/asm-sh/machvec.h @@ -56,9 +56,6 @@ struct sh_machine_vector { void (*mv_heartbeat)(void); - void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, gfp_t); - int (*mv_consistent_free)(struct device *, size_t, void *, dma_addr_t); - void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); void (*mv_ioport_unmap)(void __iomem *); }; -- cgit v1.2.3-70-g09d2 From da2d7f4bc578651455a7353995beb87db3cd8815 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 25 Jan 2008 16:04:29 +0900 Subject: sh: update r7780rp interrupt code This patch updates the board specific irq code for r7780rp. The new code is very similar to the other highlander implementations, with the exception that the r7780rp handles pci interrupts using IRL. To simplify the pci code and use the same interrupt numbers as r7780mp and r7785rp we hook in to the cpu specific pci vectors. The pci interrupts and the push switch all work well with and without this patch. CF and AX88796 are not ok though and the source of the problem is unknown at this point. The AX88796 does for not detect it's proper mac address (IPL gets it right) and the kernel hangs on CF access. As a workaround this patch removes the CF and the AX88796 from the platform datain case of r7780rp. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/Makefile | 2 +- arch/sh/boards/renesas/r7780rp/irq-r7780rp.c | 52 +++++++++++++++++++++++++--- arch/sh/boards/renesas/r7780rp/irq.c | 51 --------------------------- arch/sh/boards/renesas/r7780rp/setup.c | 10 +++--- arch/sh/drivers/pci/ops-r7780rp.c | 16 ++------- include/asm-sh/r7780rp.h | 19 ---------- 6 files changed, 57 insertions(+), 93 deletions(-) delete mode 100644 arch/sh/boards/renesas/r7780rp/irq.c (limited to 'include') diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index dd26182fbf5..20a10080b11 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -3,7 +3,7 @@ # irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o -irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o irq.o +irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o obj-y := setup.o $(irqinit-y) ifneq ($(CONFIG_SH_R7785RP),y) diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index fa4a534cade..bd34048ed0e 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -3,21 +3,65 @@ * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2008 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include #include +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + CF, /* Compact Flash */ + + PCI_A, + PCI_B, + PCI_C, + PCI_D, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */ + INTC_IRQ(PCI_B, 66), + INTC_IRQ(PCI_C, 67), + INTC_IRQ(PCI_D, 68), + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa5000000, 0, 16, /* IRLMSK */ + { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0, + 0, 0, 0, 0, 0, 0, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 65, 66, 67, 68, + IRQ_CF, 0, 0, 0, + 0, 0, 0, 0, + IRQ_AX88796, IRQ_PSW +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, + NULL, mask_registers, NULL, NULL); + unsigned char * __init highlander_init_irq_r7780rp(void) { - int i; - - for (i = 0; i < 15; i++) - make_r7780rp_irq(i); + if (ctrl_inw(0xa5000600)) { + printk(KERN_INFO "Using r7780rp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } return NULL; } diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c deleted file mode 100644 index e0b8eb52f37..00000000000 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Renesas Solutions Highlander R7780RP-1 Support. - * - * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -#ifdef CONFIG_SH_R7780RP -static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; -#elif defined(CONFIG_SH_R7780MP) -static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; -#elif defined(CONFIG_SH_R7785RP) -static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2}; -#endif - -static void enable_r7780rp_irq(unsigned int irq) -{ - /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); -} - -static void disable_r7780rp_irq(unsigned int irq) -{ - /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), - IRLCNTR1); -} - -static struct irq_chip r7780rp_irq_chip __read_mostly = { - .name = "R7780RP", - .mask = disable_r7780rp_irq, - .unmask = enable_r7780rp_irq, - .mask_ack = disable_r7780rp_irq, -}; - -void make_r7780rp_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip, - handle_level_irq, "level"); - enable_r7780rp_irq(irq); -} diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 0fdc0bc1914..a43b47726f5 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -179,9 +179,11 @@ static struct platform_device ax88796_device = { static struct platform_device *r7780rp_devices[] __initdata = { &r8a66597_usb_host_device, &m66592_usb_peripheral_device, - &cf_ide_device, &heartbeat_device, +#ifndef CONFIG_SH_R7780RP + &cf_ide_device, &ax88796_device, +#endif }; static int __init r7780rp_devices_setup(void) @@ -316,9 +318,9 @@ void __init highlander_init_irq(void) break; #endif #ifdef CONFIG_SH_R7780RP - highlander_init_irq_r7780rp(); - ucp = irl2irq; - break; + ucp = highlander_init_irq_r7780rp(); + if (ucp) + break; #endif } while (0); diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 48fe4032ebe..5fdadaeed6f 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -17,25 +17,13 @@ #include #include "pci-sh4.h" -static char r7780rp_irq_tab[] __initdata = { - 0, 1, 2, 3, -}; - -static char r7780mp_irq_tab[] __initdata = { +static char irq_tab[] __initdata = { 65, 66, 67, 68, }; int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - if (mach_is_r7780rp()) - return r7780rp_irq_tab[slot]; - if (mach_is_r7780mp() || mach_is_r7785rp()) - return r7780mp_irq_tab[slot]; - - printk(KERN_ERR "PCI: Bad IRQ mapping " - "request for slot %d, func %d\n", slot, pin-1); - - return -1; + return irq_tab[slot]; } static struct resource sh7780_io_resource = { diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index 1c2d4d18fab..bdecea0840a 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -121,21 +121,6 @@ #define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ -#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */ -#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */ -#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */ -#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */ -#define IRQ_CFINST 5 /* CF Card Insert IRQ */ -#define IRQ_M66596 6 /* M66596 IRQ */ -#define IRQ_SDCARD 7 /* SD Card IRQ */ -#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */ -#define IRQ_SCI 9 /* SCI IRQ */ -#define IRQ_2SERIAL 10 /* Serial IRQ */ -#define IRQ_EXTENTION 11 /* EXTn IRQ */ -#define IRQ_ONETH 12 /* On board Ethernet IRQ */ -#define IRQ_PSW 13 /* Push Switch IRQ */ -#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */ - #define IVDR_CK_ON 8 /* iVDR Clock ON */ #elif defined(CONFIG_SH_R7785RP) @@ -192,9 +177,7 @@ #define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) #define IRQ_CF (HL_FPGA_IRQ_BASE + 1) -#ifndef IRQ_PSW #define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) -#endif #define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) #define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) #define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) @@ -208,8 +191,6 @@ #define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) #define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) -void make_r7780rp_irq(unsigned int irq); - unsigned char *highlander_init_irq_r7780mp(void); unsigned char *highlander_init_irq_r7780rp(void); unsigned char *highlander_init_irq_r7785rp(void); -- cgit v1.2.3-70-g09d2 From 6582d7b7376aa587d74b08c74457dc28abc1a9fa Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 23 Jan 2008 16:21:18 +0900 Subject: sh: add spi header and r2d platform data V3 This patch adds the header file asm/spi.h and board specific code for the r2d board. The header file contains a structure that should be used to point out a single spi bus. The board specific code for r2d is updated with such a structure for the new spi_sh_sci driver. The structure contains a chip select callback plus information about the R9701 rtc chip which is attached to the spi bus. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/rts7751r2d/setup.c | 42 +++++++++++++++++++++++++++++++ include/asm-sh/spi.h | 13 ++++++++++ 2 files changed, 55 insertions(+) create mode 100644 include/asm-sh/spi.h (limited to 'include') diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 8528616feaa..3452b072add 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -16,9 +16,12 @@ #include #include #include +#include +#include #include #include #include +#include static struct resource cf_ide_resources[] = { [0] = { @@ -53,6 +56,43 @@ static struct platform_device cf_ide_device = { }, }; +static struct spi_board_info spi_bus[] = { + { + .modalias = "rtc-r9701", + .max_speed_hz = 1000000, + .mode = SPI_MODE_3, + }, +}; + +static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state) +{ + BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */ + ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE); +} + +static struct sh_spi_info spi_info = { + .num_chipselect = 1, + .chip_select = r2d_chip_select, +}; + +static struct resource spi_sh_sci_resources[] = { + { + .start = 0xffe00000, + .end = 0xffe0001f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spi_sh_sci_device = { + .name = "spi_sh_sci", + .id = -1, + .num_resources = ARRAY_SIZE(spi_sh_sci_resources), + .resource = spi_sh_sci_resources, + .dev = { + .platform_data = &spi_info, + }, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_OUTPORT, @@ -176,10 +216,12 @@ static struct platform_device *rts7751r2d_devices[] __initdata = { #endif &cf_ide_device, &heartbeat_device, + &spi_sh_sci_device, }; static int __init rts7751r2d_devices_setup(void) { + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } diff --git a/include/asm-sh/spi.h b/include/asm-sh/spi.h new file mode 100644 index 00000000000..e96f5b0953c --- /dev/null +++ b/include/asm-sh/spi.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SPI_H__ +#define __ASM_SPI_H__ + +struct sh_spi_info; + +struct sh_spi_info { + int bus_num; + int num_chipselect; + + void (*chip_select)(struct sh_spi_info *spi, int cs, int state); +}; + +#endif /* __ASM_SPI_H__ */ -- cgit v1.2.3-70-g09d2