From 962f480e0f9024ecdcfe2ba1d216c038ee328ced Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Wed, 19 Sep 2007 00:46:32 +0100 Subject: [MIPS] All MIPS32 processors support64-bit physical addresses. Still, only the 4K may actually implement it. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- include/asm-mips/pgtable-32.h | 4 ++-- include/asm-mips/pgtable-bits.h | 6 +++--- include/asm-mips/pgtable.h | 6 +++--- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h index ceefe027c76..4396e9ffd41 100644 --- a/include/asm-mips/pgtable-32.h +++ b/include/asm-mips/pgtable-32.h @@ -107,7 +107,7 @@ static inline void pmd_clear(pmd_t *pmdp) pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); } -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define pte_page(x) pfn_to_page(pte_pfn(x)) #define pte_pfn(x) ((unsigned long)((x).pte_high >> 6)) static inline pte_t @@ -130,7 +130,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) #define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) #endif -#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) */ +#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ #define __pgd_offset(address) pgd_index(address) #define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h index 7494ba91112..d23f19a3240 100644 --- a/include/asm-mips/pgtable-bits.h +++ b/include/asm-mips/pgtable-bits.h @@ -32,7 +32,7 @@ * unpredictable things. The code (when it is written) to deal with * this problem will be in the update_mmu_cache() code for the r4k. */ -#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define _PAGE_PRESENT (1<<6) /* implemented in software */ #define _PAGE_READ (1<<7) /* implemented in software */ @@ -122,7 +122,7 @@ #endif #endif -#endif /* defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR) */ +#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ #define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) #define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) @@ -139,7 +139,7 @@ #define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_COW #endif -#if defined(CONFIG_CPU_MIPS32_R1) && defined(CONFIG_64BIT_PHYS_ADDR) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 3) #else #define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 9) diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index 17a7703a296..009b7b14231 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -79,7 +79,7 @@ extern void paging_init(void); #define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT)) #define pmd_page_vaddr(pmd) pmd_val(pmd) -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) #define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT) @@ -182,7 +182,7 @@ extern pgd_t swapper_pg_dir[]; * The following only work if pte_present() is true. * Undefined behaviour if not.. */ -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; } static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; } static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; } @@ -309,7 +309,7 @@ static inline pgprot_t pgprot_noncached(pgprot_t _prot) */ #define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { pte.pte_low &= _PAGE_CHG_MASK; -- cgit v1.2.3-70-g09d2 From bec5052743ec8ae4c5669918cf9b130bf15709a2 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Wed, 19 Sep 2007 00:51:57 +0100 Subject: [MIPS] Tidy up cache attributes Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- include/asm-mips/pgtable-bits.h | 81 +++++++++++++++++++++-------------------- 1 file changed, 42 insertions(+), 39 deletions(-) (limited to 'include') diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h index d23f19a3240..728fbe7b994 100644 --- a/include/asm-mips/pgtable-bits.h +++ b/include/asm-mips/pgtable-bits.h @@ -39,7 +39,7 @@ #define _PAGE_WRITE (1<<8) /* implemented in software */ #define _PAGE_ACCESSED (1<<9) /* implemented in software */ #define _PAGE_MODIFIED (1<<10) /* implemented in software */ -#define _PAGE_FILE (1<<10) /* set:pagecache unset:swap */ +#define _PAGE_FILE (1<<10) /* set:pagecache unset:swap */ #define _PAGE_R4KBUG (1<<0) /* workaround for r4k bug */ #define _PAGE_GLOBAL (1<<0) @@ -47,15 +47,9 @@ #define _PAGE_SILENT_READ (1<<1) /* synonym */ #define _PAGE_DIRTY (1<<2) /* The MIPS dirty bit */ #define _PAGE_SILENT_WRITE (1<<2) +#define _CACHE_SHIFT 3 #define _CACHE_MASK (7<<3) -/* MIPS32 defines only values 2 and 3. The rest are implementation - * dependent. - */ -#define _CACHE_UNCACHED (2<<3) -#define _CACHE_CACHABLE_NONCOHERENT (3<<3) -#define _CACHE_CACHABLE_COW (3<<3) /* Au1x */ - #else #define _PAGE_PRESENT (1<<0) /* implemented in software */ @@ -74,55 +68,66 @@ #define _PAGE_SILENT_WRITE (1<<10) #define _CACHE_UNCACHED (1<<11) #define _CACHE_MASK (1<<11) -#define _CACHE_CACHABLE_NONCOHERENT 0 #else + #define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */ #define _PAGE_GLOBAL (1<<6) #define _PAGE_VALID (1<<7) #define _PAGE_SILENT_READ (1<<7) /* synonym */ #define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */ #define _PAGE_SILENT_WRITE (1<<8) +#define _CACHE_SHIFT 9 #define _CACHE_MASK (7<<9) -#ifdef CONFIG_CPU_SB1 +#endif +#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */ + + +/* + * Cache attributes + */ +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + +#define _CACHE_CACHABLE_NONCOHERENT 0 + +#elif defined(CONFIG_CPU_SB1) /* No penalty for being coherent on the SB1, so just use it for "noncoherent" spaces, too. Shouldn't hurt. */ -#define _CACHE_UNCACHED (2<<9) -#define _CACHE_CACHABLE_COW (5<<9) -#define _CACHE_CACHABLE_NONCOHERENT (5<<9) -#define _CACHE_UNCACHED_ACCELERATED (7<<9) +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) +#define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT) +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) #elif defined(CONFIG_CPU_RM9000) -#define _CACHE_WT (0 << 9) -#define _CACHE_WTWA (1 << 9) -#define _CACHE_UC_B (2 << 9) -#define _CACHE_WB (3 << 9) -#define _CACHE_CWBEA (4 << 9) -#define _CACHE_CWB (5 << 9) -#define _CACHE_UCNB (6 << 9) -#define _CACHE_FPC (7 << 9) +#define _CACHE_WT (0<<_CACHE_SHIFT) +#define _CACHE_WTWA (1<<_CACHE_SHIFT) +#define _CACHE_UC_B (2<<_CACHE_SHIFT) +#define _CACHE_WB (3<<_CACHE_SHIFT) +#define _CACHE_CWBEA (4<<_CACHE_SHIFT) +#define _CACHE_CWB (5<<_CACHE_SHIFT) +#define _CACHE_UCNB (6<<_CACHE_SHIFT) +#define _CACHE_FPC (7<<_CACHE_SHIFT) -#define _CACHE_UNCACHED _CACHE_UC_B -#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB +#define _CACHE_UNCACHED _CACHE_UC_B +#define _CACHE_CACHABLE_NONCOHERENT _CACHE_WB #else -#define _CACHE_CACHABLE_NO_WA (0<<9) /* R4600 only */ -#define _CACHE_CACHABLE_WA (1<<9) /* R4600 only */ -#define _CACHE_UNCACHED (2<<9) /* R4[0246]00 */ -#define _CACHE_CACHABLE_NONCOHERENT (3<<9) /* R4[0246]00 */ -#define _CACHE_CACHABLE_CE (4<<9) /* R4[04]00MC only */ -#define _CACHE_CACHABLE_COW (5<<9) /* R4[04]00MC only */ -#define _CACHE_CACHABLE_CUW (6<<9) /* R4[04]00MC only */ -#define _CACHE_UNCACHED_ACCELERATED (7<<9) /* R10000 only */ +#define _CACHE_CACHABLE_NO_WA (0<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_CACHABLE_WA (1<<_CACHE_SHIFT) /* R4600 only */ +#define _CACHE_UNCACHED (2<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT) /* R4[0246]00 */ +#define _CACHE_CACHABLE_CE (4<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COW (5<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_CACHABLE_COHERENT (5<<_CACHE_SHIFT) /* MIPS32R2 CMP */ +#define _CACHE_CACHABLE_CUW (6<<_CACHE_SHIFT) /* R4[04]00MC only */ +#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT) /* R10000 only */ #endif -#endif -#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ #define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) #define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) @@ -135,14 +140,12 @@ #define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_NONCOHERENT #elif defined(CONFIG_CPU_RM9000) #define PAGE_CACHABLE_DEFAULT _CACHE_CWB +#elif defined(CONFIG_SOC_AU1X00) +#define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_NONCOHERENT #else #define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_COW #endif -#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) -#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 3) -#else -#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT >> 9) -#endif +#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT) #endif /* _ASM_PGTABLE_BITS_H */ -- cgit v1.2.3-70-g09d2 From 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Wed, 19 Sep 2007 00:58:24 +0100 Subject: [MIPS] Allow setting of the cache attribute at run time. Slightly tacky, but there is a precedent in the sparc archirecture code. Signed-off-by: Chris Dearman Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig.debug | 10 ----- arch/mips/configs/mipssim_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 1 - arch/mips/configs/pnx8550-stb810_defconfig | 1 - arch/mips/mm/c-r4k.c | 19 +++++++++- arch/mips/mm/cache.c | 31 ++++++++++++---- arch/mips/philips/pnx8550/jbs/board_setup.c | 4 +- arch/mips/philips/pnx8550/stb810/board_setup.c | 4 +- include/asm-mips/io.h | 2 +- include/asm-mips/pgtable-bits.h | 12 ------ include/asm-mips/pgtable.h | 51 +++++++++++++++----------- 11 files changed, 75 insertions(+), 61 deletions(-) (limited to 'include') diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index fd7124c1b75..f18cf92650e 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -73,14 +73,4 @@ config RUNTIME_DEBUG include/asm-mips/debug.h for debuging macros. If unsure, say N. -config MIPS_UNCACHED - bool "Run uncached" - depends on DEBUG_KERNEL && !SMP && !SGI_IP27 - help - If you say Y here there kernel will disable all CPU caches. This will - reduce the system's performance dramatically but can help finding - otherwise hard to track bugs. It can also useful if you're doing - hardware debugging with a logic analyzer and need to see all traffic - on the bus. - endmenu diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 6db0bdaefb2..4f6bce99d5c 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -641,7 +641,6 @@ CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_RUNTIME_DEBUG is not set -# CONFIG_MIPS_UNCACHED is not set # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 518a60892b7..780c7fc24b8 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1223,7 +1223,6 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # CONFIG_KGDB is not set CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set -# CONFIG_MIPS_UNCACHED is not set # # Security options diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 68351eb81bc..267f21ed1d0 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1213,7 +1213,6 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # CONFIG_KGDB is not set CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set -# CONFIG_MIPS_UNCACHED is not set # # Security options diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 77aefb4ebed..3d3e5365134 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -1216,9 +1217,25 @@ void au1x00_fixup_config_od(void) } } +static int __cpuinitdata cca = -1; + +static int __init cca_setup(char *str) +{ + get_option(&str, &cca); + + return 1; +} + +__setup("cca=", cca_setup); + static void __cpuinit coherency_setup(void) { - change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT); + if (cca < 0 || cca > 7) + cca = read_c0_config() & CONF_CM_CMASK; + _page_cachable_default = cca << _CACHE_SHIFT; + + pr_debug("Using cache attribute %d\n", cca); + change_c0_config(CONF_CM_CMASK, cca); /* * c0_status.cu=0 specifies that updates by the sc instruction use diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index f5903679ee6..034e8506f6e 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -130,8 +130,28 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address, } } -static char cache_panic[] __cpuinitdata = - "Yeee, unsupported cache architecture."; +unsigned long _page_cachable_default; +EXPORT_SYMBOL_GPL(_page_cachable_default); + +static inline void setup_protection_map(void) +{ + protection_map[0] = PAGE_NONE; + protection_map[1] = PAGE_READONLY; + protection_map[2] = PAGE_COPY; + protection_map[3] = PAGE_COPY; + protection_map[4] = PAGE_READONLY; + protection_map[5] = PAGE_READONLY; + protection_map[6] = PAGE_COPY; + protection_map[7] = PAGE_COPY; + protection_map[8] = PAGE_NONE; + protection_map[9] = PAGE_READONLY; + protection_map[10] = PAGE_SHARED; + protection_map[11] = PAGE_SHARED; + protection_map[12] = PAGE_READONLY; + protection_map[13] = PAGE_READONLY; + protection_map[14] = PAGE_SHARED; + protection_map[15] = PAGE_SHARED; +} void __devinit cpu_cache_init(void) { @@ -139,34 +159,29 @@ void __devinit cpu_cache_init(void) extern void __weak r3k_cache_init(void); r3k_cache_init(); - return; } if (cpu_has_6k_cache) { extern void __weak r6k_cache_init(void); r6k_cache_init(); - return; } if (cpu_has_4k_cache) { extern void __weak r4k_cache_init(void); r4k_cache_init(); - return; } if (cpu_has_8k_cache) { extern void __weak r8k_cache_init(void); r8k_cache_init(); - return; } if (cpu_has_tx39_cache) { extern void __weak tx39_cache_init(void); tx39_cache_init(); - return; } - panic(cache_panic); + setup_protection_map(); } int __weak __uncached_access(struct file *file, unsigned long addr) diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c index f92826e0096..e550a3e12f6 100644 --- a/arch/mips/philips/pnx8550/jbs/board_setup.c +++ b/arch/mips/philips/pnx8550/jbs/board_setup.c @@ -53,8 +53,8 @@ void __init board_setup(void) /* clear all three cache coherency fields */ config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); + config0 |= (_page_cachable_default >> _CACHE_SHIFT) | + (CONF_CM_DEFAULT << 25) | (CONF_CM_DEFAULT << 28); write_c0_config(config0); BARRIER; diff --git a/arch/mips/philips/pnx8550/stb810/board_setup.c b/arch/mips/philips/pnx8550/stb810/board_setup.c index 345d71e53cf..d461d7a6236 100644 --- a/arch/mips/philips/pnx8550/stb810/board_setup.c +++ b/arch/mips/philips/pnx8550/stb810/board_setup.c @@ -39,8 +39,8 @@ void __init board_setup(void) /* clear all three cache coherency fields */ config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); + config0 |= (_page_cachable_default >> _CACHE_SHIFT) | + (CONF_CM_DEFAULT << 25) | (CONF_CM_DEFAULT << 28); write_c0_config(config0); configpr = read_c0_config7(); diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index e62058b0d28..f18d2816cbe 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -273,7 +273,7 @@ static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size, * memory-like regions on I/O busses. */ #define ioremap_cachable(offset, size) \ - __ioremap_mode((offset), (size), PAGE_CACHABLE_DEFAULT) + __ioremap_mode((offset), (size), _page_cachable_default) /* * These two are MIPS specific ioremap variant. ioremap_cacheable_cow diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h index 728fbe7b994..60e2f9338fc 100644 --- a/include/asm-mips/pgtable-bits.h +++ b/include/asm-mips/pgtable-bits.h @@ -134,18 +134,6 @@ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) -#ifdef CONFIG_MIPS_UNCACHED -#define PAGE_CACHABLE_DEFAULT _CACHE_UNCACHED -#elif defined(CONFIG_DMA_NONCOHERENT) -#define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_NONCOHERENT -#elif defined(CONFIG_CPU_RM9000) -#define PAGE_CACHABLE_DEFAULT _CACHE_CWB -#elif defined(CONFIG_SOC_AU1X00) -#define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_NONCOHERENT -#else -#define PAGE_CACHABLE_DEFAULT _CACHE_CACHABLE_COW -#endif - #define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT) #endif /* _ASM_PGTABLE_BITS_H */ diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index 009b7b14231..582f56f42f0 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -23,15 +23,15 @@ struct vm_area_struct; #define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT) #define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - PAGE_CACHABLE_DEFAULT) + _page_cachable_default) #define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ - PAGE_CACHABLE_DEFAULT) + _page_cachable_default) #define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ - PAGE_CACHABLE_DEFAULT) + _page_cachable_default) #define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \ - _PAGE_GLOBAL | PAGE_CACHABLE_DEFAULT) + _PAGE_GLOBAL | _page_cachable_default) #define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - PAGE_CACHABLE_DEFAULT) + _page_cachable_default) #define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \ __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED) @@ -40,23 +40,30 @@ struct vm_area_struct; * read. Also, write permissions imply read permissions. This is the closest * we can get by reasonable means.. */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED + +/* + * Dummy values to fill the table in mmap.c + * The real values will be generated at runtime + */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) + +extern unsigned long _page_cachable_default; /* * ZERO_PAGE is a global shared page that is always zero; used -- cgit v1.2.3-70-g09d2 From 308402445e005a039a72b315cd9b5ceeaea0063c Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 21 Sep 2007 14:50:08 +0100 Subject: [MIPS] Add CoreFPGA5 support; distinguish between SOCit/ROCit Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/init.c | 16 +++++++++++----- include/asm-mips/mips-boards/generic.h | 1 + 2 files changed, 12 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 1695dca5506..07671fb9074 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -295,15 +295,21 @@ void __init prom_init(void) break; case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_FPGA4: case MIPS_REVISION_CORID_CORE_24K: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: + /* + * SOCit/ROCit support is essentially identical + * but make an attempt to distinguish them + */ mips_revision_sconid = MIPS_REVISION_SCON_SOCIT; break; + case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_FPGA4: + case MIPS_REVISION_CORID_CORE_FPGA5: + case MIPS_REVISION_CORID_CORE_EMUL_MSC: default: - mips_display_message("CC Error"); - while (1); /* We die here... */ + /* See above */ + mips_revision_sconid = MIPS_REVISION_SCON_ROCIT; + break; } } diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index 1c39d339521..33407bee4e7 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -68,6 +68,7 @@ #define MIPS_REVISION_CORID_CORE_FPGA3 9 #define MIPS_REVISION_CORID_CORE_24K 10 #define MIPS_REVISION_CORID_CORE_FPGA4 11 +#define MIPS_REVISION_CORID_CORE_FPGA5 12 /**** Artificial corid defines ****/ /* -- cgit v1.2.3-70-g09d2 From 39b8d5254246ac56342b72f812255c8f7a74dca9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 28 Apr 2008 17:14:26 +0100 Subject: [MIPS] Add support for MIPS CMP platform. Signed-off-by: Chris Dearman Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 18 ++ arch/mips/kernel/Makefile | 3 + arch/mips/kernel/cpu-probe.c | 5 + arch/mips/kernel/irq-gic.c | 295 ++++++++++++++++++ arch/mips/kernel/smp-cmp.c | 265 ++++++++++++++++ arch/mips/kernel/smp-mt.c | 96 +----- arch/mips/kernel/smp.c | 4 + arch/mips/kernel/smtc.c | 3 +- arch/mips/kernel/sync-r4k.c | 159 ++++++++++ arch/mips/kernel/traps.c | 111 ++++++- arch/mips/mips-boards/generic/Makefile | 1 + arch/mips/mips-boards/generic/amon.c | 80 +++++ arch/mips/mips-boards/generic/init.c | 3 + arch/mips/mips-boards/generic/time.c | 29 +- arch/mips/mips-boards/malta/Makefile | 1 + arch/mips/mips-boards/malta/malta_int.c | 346 +++++++++++++++++++++ arch/mips/mips-boards/malta/malta_setup.c | 6 + arch/mips/mm/c-r4k.c | 43 ++- arch/mips/mm/init.c | 2 +- arch/mips/oprofile/common.c | 1 + arch/mips/oprofile/op_model_mipsxx.c | 34 ++- include/asm-mips/cmp.h | 18 ++ include/asm-mips/cpu.h | 7 +- include/asm-mips/gcmpregs.h | 117 +++++++ include/asm-mips/gic.h | 487 ++++++++++++++++++++++++++++++ include/asm-mips/mips-boards/launch.h | 35 +++ include/asm-mips/mips-boards/malta.h | 23 ++ include/asm-mips/mips-boards/maltaint.h | 27 ++ include/asm-mips/mips-boards/maltasmp.h | 36 +++ include/asm-mips/mipsmtregs.h | 8 +- include/asm-mips/r4k-timer.h | 30 ++ include/asm-mips/smp-ops.h | 1 + include/asm-mips/smtc.h | 1 + include/asm-mips/smvp.h | 19 ++ 34 files changed, 2191 insertions(+), 123 deletions(-) create mode 100644 arch/mips/kernel/irq-gic.c create mode 100644 arch/mips/kernel/smp-cmp.c create mode 100644 arch/mips/kernel/sync-r4k.c create mode 100644 arch/mips/mips-boards/generic/amon.c create mode 100644 include/asm-mips/cmp.h create mode 100644 include/asm-mips/gcmpregs.h create mode 100644 include/asm-mips/gic.h create mode 100644 include/asm-mips/mips-boards/launch.h create mode 100644 include/asm-mips/mips-boards/maltasmp.h create mode 100644 include/asm-mips/r4k-timer.h create mode 100644 include/asm-mips/smvp.h (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8724ed3298d..89b03775a19 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -221,6 +221,7 @@ config MIPS_MALTA select DMA_NONCOHERENT select GENERIC_ISA_DMA select IRQ_CPU + select IRQ_GIC select HW_HAS_PCI select I8253 select I8259 @@ -840,6 +841,9 @@ config MIPS_NILE4 config MIPS_DISABLE_OBSOLETE_IDE bool +config SYNC_R4K + bool + config NO_IOPORT def_bool n @@ -909,6 +913,9 @@ config IRQ_TXX9 config IRQ_GT641XX bool +config IRQ_GIC + bool + config MIPS_BOARDS_GEN bool @@ -1811,6 +1818,17 @@ config NR_CPUS performance should round up your number of processors to the next power of two. +config MIPS_CMP + bool "MIPS CMP framework support" + depends on SMP + select SYNC_R4K + select SYS_SUPPORTS_SCHED_SMT + select WEAK_ORDERING + default n + help + This is a placeholder option for the GCMP work. It will need to + be handled differently... + source "kernel/time/Kconfig" # diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 67d97fb02c3..d0ca4d41bb7 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o +obj-$(CONFIG_SYNC_R4K) += sync-r4k.o binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ irix5sys.o sysirix.o @@ -50,6 +51,7 @@ obj-$(CONFIG_MIPS_MT) += mips-mt.o obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o obj-$(CONFIG_MIPS_MT_SMTC) += smtc.o smtc-asm.o smtc-proc.o obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o +obj-$(CONFIG_MIPS_CMP) += smp-cmp.o obj-$(CONFIG_CPU_MIPSR2) += spram.o obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o @@ -63,6 +65,7 @@ obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o +obj-$(CONFIG_IRQ_GIC) += irq-gic.o obj-$(CONFIG_32BIT) += scall32-o32.o obj-$(CONFIG_64BIT) += scall64-64.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index add717dccf7..a742a967169 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -169,6 +169,7 @@ static inline void check_wait(void) case CPU_24K: case CPU_34K: + case CPU_1004K: cpu_wait = r4k_wait; if (read_c0_config7() & MIPS_CONF7_WII) cpu_wait = r4k_wait_irqoff; @@ -717,6 +718,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c) case PRID_IMP_74K: c->cputype = CPU_74K; break; + case PRID_IMP_1004K: + c->cputype = CPU_1004K; + break; } spram_config(); @@ -884,6 +888,7 @@ static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c) case CPU_24K: name = "MIPS 24K"; break; case CPU_25KF: name = "MIPS 25Kf"; break; case CPU_34K: name = "MIPS 34K"; break; + case CPU_1004K: name = "MIPS 1004K"; break; case CPU_74K: name = "MIPS 74K"; break; case CPU_VR4111: name = "NEC VR4111"; break; case CPU_VR4121: name = "NEC VR4121"; break; diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c new file mode 100644 index 00000000000..f0a4bb19e09 --- /dev/null +++ b/arch/mips/kernel/irq-gic.c @@ -0,0 +1,295 @@ +#undef DEBUG + +#include +#include + +#include +#include +#include +#include +#include +#include +#include + + +static unsigned long _gic_base; +static unsigned int _irqbase, _mapsize, numvpes, numintrs; +static struct gic_intr_map *_intrmap; + +static struct gic_pcpu_mask pcpu_masks[NR_CPUS]; +static struct gic_pending_regs pending_regs[NR_CPUS]; +static struct gic_intrmask_regs intrmask_regs[NR_CPUS]; + +#define gic_wedgeb2bok 0 /* + * Can GIC handle b2b writes to wedge register? + */ +#if gic_wedgeb2bok == 0 +static DEFINE_SPINLOCK(gic_wedgeb2b_lock); +#endif + +void gic_send_ipi(unsigned int intr) +{ +#if gic_wedgeb2bok == 0 + unsigned long flags; +#endif + pr_debug("CPU%d: %s status %08x\n", smp_processor_id(), __func__, + read_c0_status()); + if (!gic_wedgeb2bok) + spin_lock_irqsave(&gic_wedgeb2b_lock, flags); + GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr); + if (!gic_wedgeb2bok) { + (void) GIC_REG(SHARED, GIC_SH_CONFIG); + spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags); + } +} + +/* This is Malta specific and needs to be exported */ +static void vpe_local_setup(unsigned int numvpes) +{ + int i; + unsigned long timer_interrupt = 5, perf_interrupt = 5; + unsigned int vpe_ctl; + + /* + * Setup the default performance counter timer interrupts + * for all VPEs + */ + for (i = 0; i < numvpes; i++) { + GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), i); + + /* Are Interrupts locally routable? */ + GICREAD(GIC_REG(VPE_OTHER, GIC_VPE_CTL), vpe_ctl); + if (vpe_ctl & GIC_VPE_CTL_TIMER_RTBL_MSK) + GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_TIMER_MAP), + GIC_MAP_TO_PIN_MSK | timer_interrupt); + + if (vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK) + GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP), + GIC_MAP_TO_PIN_MSK | perf_interrupt); + } +} + +unsigned int gic_get_int(void) +{ + unsigned int i; + unsigned long *pending, *intrmask, *pcpu_mask; + unsigned long *pending_abs, *intrmask_abs; + + /* Get per-cpu bitmaps */ + pending = pending_regs[smp_processor_id()].pending; + intrmask = intrmask_regs[smp_processor_id()].intrmask; + pcpu_mask = pcpu_masks[smp_processor_id()].pcpu_mask; + + pending_abs = (unsigned long *) GIC_REG_ABS_ADDR(SHARED, + GIC_SH_PEND_31_0_OFS); + intrmask_abs = (unsigned long *) GIC_REG_ABS_ADDR(SHARED, + GIC_SH_MASK_31_0_OFS); + + for (i = 0; i < BITS_TO_LONGS(GIC_NUM_INTRS); i++) { + GICREAD(*pending_abs, pending[i]); + GICREAD(*intrmask_abs, intrmask[i]); + pending_abs++; + intrmask_abs++; + } + + bitmap_and(pending, pending, intrmask, GIC_NUM_INTRS); + bitmap_and(pending, pending, pcpu_mask, GIC_NUM_INTRS); + + i = find_first_bit(pending, GIC_NUM_INTRS); + + pr_debug("CPU%d: %s pend=%d\n", smp_processor_id(), __func__, i); + + return i; +} + +static unsigned int gic_irq_startup(unsigned int irq) +{ + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + irq -= _irqbase; + /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ + GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), + 1 << (irq % 32)); + return 0; +} + +static void gic_irq_ack(unsigned int irq) +{ +#if gic_wedgeb2bok == 0 + unsigned long flags; +#endif + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + irq -= _irqbase; + GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), + 1 << (irq % 32)); + + if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) { + if (!gic_wedgeb2bok) + spin_lock_irqsave(&gic_wedgeb2b_lock, flags); + GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq); + if (!gic_wedgeb2bok) { + (void) GIC_REG(SHARED, GIC_SH_CONFIG); + spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags); + } + } +} + +static void gic_mask_irq(unsigned int irq) +{ + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + irq -= _irqbase; + /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ + GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))), + 1 << (irq % 32)); +} + +static void gic_unmask_irq(unsigned int irq) +{ + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + irq -= _irqbase; + /* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */ + GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))), + 1 << (irq % 32)); +} + +#ifdef CONFIG_SMP + +static DEFINE_SPINLOCK(gic_lock); + +static void gic_set_affinity(unsigned int irq, cpumask_t cpumask) +{ + cpumask_t tmp = CPU_MASK_NONE; + unsigned long flags; + int i; + + pr_debug(KERN_DEBUG "%s called\n", __func__); + irq -= _irqbase; + + cpus_and(tmp, cpumask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + /* Assumption : cpumask refers to a single CPU */ + spin_lock_irqsave(&gic_lock, flags); + for (;;) { + /* Re-route this IRQ */ + GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp)); + + /* + * FIXME: assumption that _intrmap is ordered and has no holes + */ + + /* Update the intr_map */ + _intrmap[irq].cpunum = first_cpu(tmp); + + /* Update the pcpu_masks */ + for (i = 0; i < NR_CPUS; i++) + clear_bit(irq, pcpu_masks[i].pcpu_mask); + set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask); + + } + irq_desc[irq].affinity = cpumask; + spin_unlock_irqrestore(&gic_lock, flags); + +} +#endif + +static struct irq_chip gic_irq_controller = { + .name = "MIPS GIC", + .startup = gic_irq_startup, + .ack = gic_irq_ack, + .mask = gic_mask_irq, + .mask_ack = gic_mask_irq, + .unmask = gic_unmask_irq, + .eoi = gic_unmask_irq, +#ifdef CONFIG_SMP + .set_affinity = gic_set_affinity, +#endif +}; + +static void __init setup_intr(unsigned int intr, unsigned int cpu, + unsigned int pin, unsigned int polarity, unsigned int trigtype) +{ + /* Setup Intr to Pin mapping */ + if (pin & GIC_MAP_TO_NMI_MSK) { + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin); + /* FIXME: hack to route NMI to all cpu's */ + for (cpu = 0; cpu < NR_CPUS; cpu += 32) { + GICWRITE(GIC_REG_ADDR(SHARED, + GIC_SH_MAP_TO_VPE_REG_OFF(intr, cpu)), + 0xffffffff); + } + } else { + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), + GIC_MAP_TO_PIN_MSK | pin); + /* Setup Intr to CPU mapping */ + GIC_SH_MAP_TO_VPE_SMASK(intr, cpu); + } + + /* Setup Intr Polarity */ + GIC_SET_POLARITY(intr, polarity); + + /* Setup Intr Trigger Type */ + GIC_SET_TRIGGER(intr, trigtype); + + /* Init Intr Masks */ + GIC_SET_INTR_MASK(intr, 0); +} + +static void __init gic_basic_init(void) +{ + unsigned int i, cpu; + + /* Setup defaults */ + for (i = 0; i < GIC_NUM_INTRS; i++) { + GIC_SET_POLARITY(i, GIC_POL_POS); + GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL); + GIC_SET_INTR_MASK(i, 0); + } + + /* Setup specifics */ + for (i = 0; i < _mapsize; i++) { + cpu = _intrmap[i].cpunum; + if (cpu == X) + continue; + + setup_intr(_intrmap[i].intrnum, + _intrmap[i].cpunum, + _intrmap[i].pin, + _intrmap[i].polarity, + _intrmap[i].trigtype); + /* Initialise per-cpu Interrupt software masks */ + if (_intrmap[i].ipiflag) + set_bit(_intrmap[i].intrnum, pcpu_masks[cpu].pcpu_mask); + } + + vpe_local_setup(numvpes); + + for (i = _irqbase; i < (_irqbase + numintrs); i++) + set_irq_chip(i, &gic_irq_controller); +} + +void __init gic_init(unsigned long gic_base_addr, + unsigned long gic_addrspace_size, + struct gic_intr_map *intr_map, unsigned int intr_map_size, + unsigned int irqbase) +{ + unsigned int gicconfig; + + _gic_base = (unsigned long) ioremap_nocache(gic_base_addr, + gic_addrspace_size); + _irqbase = irqbase; + _intrmap = intr_map; + _mapsize = intr_map_size; + + GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig); + numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >> + GIC_SH_CONFIG_NUMINTRS_SHF; + numintrs = ((numintrs + 1) * 8); + + numvpes = (gicconfig & GIC_SH_CONFIG_NUMVPES_MSK) >> + GIC_SH_CONFIG_NUMVPES_SHF; + + pr_debug("%s called\n", __func__); + + gic_basic_init(); +} diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c new file mode 100644 index 00000000000..ca476c4f62a --- /dev/null +++ b/arch/mips/kernel/smp-cmp.c @@ -0,0 +1,265 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Chris Dearman (chris@mips.com) + */ + +#undef DEBUG + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Crude manipulation of the CPU masks to control which + * which CPU's are brought online during initialisation + * + * Beware... this needs to be called after CPU discovery + * but before CPU bringup + */ +static int __init allowcpus(char *str) +{ + cpumask_t cpu_allow_map; + char buf[256]; + int len; + + cpus_clear(cpu_allow_map); + if (cpulist_parse(str, cpu_allow_map) == 0) { + cpu_set(0, cpu_allow_map); + cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map); + len = cpulist_scnprintf(buf, sizeof(buf)-1, cpu_possible_map); + buf[len] = '\0'; + pr_debug("Allowable CPUs: %s\n", buf); + return 1; + } else + return 0; +} +__setup("allowcpus=", allowcpus); + +static void ipi_call_function(unsigned int cpu) +{ + unsigned int action = 0; + + pr_debug("CPU%d: %s cpu %d status %08x\n", + smp_processor_id(), __func__, cpu, read_c0_status()); + + switch (cpu) { + case 0: + action = GIC_IPI_EXT_INTR_CALLFNC_VPE0; + break; + case 1: + action = GIC_IPI_EXT_INTR_CALLFNC_VPE1; + break; + case 2: + action = GIC_IPI_EXT_INTR_CALLFNC_VPE2; + break; + case 3: + action = GIC_IPI_EXT_INTR_CALLFNC_VPE3; + break; + } + gic_send_ipi(action); +} + + +static void ipi_resched(unsigned int cpu) +{ + unsigned int action = 0; + + pr_debug("CPU%d: %s cpu %d status %08x\n", + smp_processor_id(), __func__, cpu, read_c0_status()); + + switch (cpu) { + case 0: + action = GIC_IPI_EXT_INTR_RESCHED_VPE0; + break; + case 1: + action = GIC_IPI_EXT_INTR_RESCHED_VPE1; + break; + case 2: + action = GIC_IPI_EXT_INTR_RESCHED_VPE2; + break; + case 3: + action = GIC_IPI_EXT_INTR_RESCHED_VPE3; + break; + } + gic_send_ipi(action); +} + +/* + * FIXME: This isn't restricted to CMP + * The SMVP kernel could use GIC interrupts if available + */ +void cmp_send_ipi_single(int cpu, unsigned int action) +{ + unsigned long flags; + + local_irq_save(flags); + + switch (action) { + case SMP_CALL_FUNCTION: + ipi_call_function(cpu); + break; + + case SMP_RESCHEDULE_YOURSELF: + ipi_resched(cpu); + break; + } + + local_irq_restore(flags); +} + +static void cmp_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + cmp_send_ipi_single(i, action); +} + +static void cmp_init_secondary(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* Assume GIC is present */ + change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 | + STATUSF_IP7); + + /* Enable per-cpu interrupts: platform specific */ + + c->core = (read_c0_ebase() >> 1) & 0xff; +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) + c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; +#endif +#ifdef CONFIG_MIPS_MT_SMTC + c->tc_id = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; +#endif +} + +static void cmp_smp_finish(void) +{ + pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__); + + /* CDFIXME: remove this? */ + write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ)); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(smp_processor_id(), mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + local_irq_enable(); +} + +static void cmp_cpus_done(void) +{ + pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__); +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it running + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + */ +static void cmp_boot_secondary(int cpu, struct task_struct *idle) +{ + struct thread_info *gp = task_thread_info(idle); + unsigned long sp = __KSTK_TOS(idle); + unsigned long pc = (unsigned long)&smp_bootstrap; + unsigned long a0 = 0; + + pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(), + __func__, cpu); + +#if 0 + /* Needed? */ + flush_icache_range((unsigned long)gp, + (unsigned long)(gp + sizeof(struct thread_info))); +#endif + + amon_cpu_start(cpu, pc, sp, gp, a0); +} + +/* + * Common setup before any secondaries are started + */ +void __init cmp_smp_setup(void) +{ + int i; + int ncpu = 0; + + pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpu_set(0, mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + for (i = 1; i < NR_CPUS; i++) { + if (amon_cpu_avail(i)) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = ++ncpu; + __cpu_logical_map[ncpu] = i; + } + } + + if (cpu_has_mipsmt) { + unsigned int nvpe, mvpconf0 = read_c0_mvpconf0(); + + nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + smp_num_siblings = nvpe; + } + pr_info("Detected %i available secondary CPU(s)\n", ncpu); +} + +void __init cmp_prepare_cpus(unsigned int max_cpus) +{ + pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n", + smp_processor_id(), __func__, max_cpus); + + /* + * FIXME: some of these options are per-system, some per-core and + * some per-cpu + */ + mips_mt_set_cpuoptions(); +} + +struct plat_smp_ops cmp_smp_ops = { + .send_ipi_single = cmp_send_ipi_single, + .send_ipi_mask = cmp_send_ipi_mask, + .init_secondary = cmp_init_secondary, + .smp_finish = cmp_smp_finish, + .cpus_done = cmp_cpus_done, + .boot_secondary = cmp_boot_secondary, + .smp_setup = cmp_smp_setup, + .prepare_cpus = cmp_prepare_cpus, +}; diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index e9c393a4177..87a1816c1f4 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -36,63 +36,7 @@ #include #include -#define MIPS_CPU_IPI_RESCHED_IRQ 0 -#define MIPS_CPU_IPI_CALL_IRQ 1 - -static int cpu_ipi_resched_irq, cpu_ipi_call_irq; - -#if 0 -static void dump_mtregisters(int vpe, int tc) -{ - printk("vpe %d tc %d\n", vpe, tc); - - settc(tc); - - printk(" c0 status 0x%lx\n", read_vpe_c0_status()); - printk(" vpecontrol 0x%lx\n", read_vpe_c0_vpecontrol()); - printk(" vpeconf0 0x%lx\n", read_vpe_c0_vpeconf0()); - printk(" tcstatus 0x%lx\n", read_tc_c0_tcstatus()); - printk(" tcrestart 0x%lx\n", read_tc_c0_tcrestart()); - printk(" tcbind 0x%lx\n", read_tc_c0_tcbind()); - printk(" tchalt 0x%lx\n", read_tc_c0_tchalt()); -} -#endif - -static void ipi_resched_dispatch(void) -{ - do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); -} - -static void ipi_call_dispatch(void) -{ - do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); -} - -static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) -{ - return IRQ_HANDLED; -} - -static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) -{ - smp_call_function_interrupt(); - - return IRQ_HANDLED; -} - -static struct irqaction irq_resched = { - .handler = ipi_resched_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, - .name = "IPI_resched" -}; - -static struct irqaction irq_call = { - .handler = ipi_call_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, - .name = "IPI_call" -}; - -static void __init smp_copy_vpe_config(void) +static void __init smvp_copy_vpe_config(void) { write_vpe_c0_status( (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); @@ -109,7 +53,7 @@ static void __init smp_copy_vpe_config(void) write_vpe_c0_count(read_c0_count()); } -static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0, +static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0, unsigned int ncpu) { if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) @@ -135,12 +79,12 @@ static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0, write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); if (tc != 0) - smp_copy_vpe_config(); + smvp_copy_vpe_config(); return ncpu; } -static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0) +static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0) { unsigned long tmp; @@ -207,15 +151,20 @@ static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action) static void __cpuinit vsmp_init_secondary(void) { - /* Enable per-cpu interrupts */ + extern int gic_present; /* This is Malta specific: IPI,performance and timer inetrrupts */ - write_c0_status((read_c0_status() & ~ST0_IM ) | - (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7)); + if (gic_present) + change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | + STATUSF_IP6 | STATUSF_IP7); + else + change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 | + STATUSF_IP6 | STATUSF_IP7); } static void __cpuinit vsmp_smp_finish(void) { + /* CDFIXME: remove this? */ write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); #ifdef CONFIG_MIPS_MT_FPAFF @@ -276,7 +225,7 @@ static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle) /* * Common setup before any secondaries are started * Make sure all CPU's are in a sensible state before we boot any of the - * secondarys + * secondaries */ static void __init vsmp_smp_setup(void) { @@ -309,8 +258,8 @@ static void __init vsmp_smp_setup(void) for (tc = 0; tc <= ntc; tc++) { settc(tc); - smp_tc_init(tc, mvpconf0); - ncpu = smp_vpe_init(tc, mvpconf0, ncpu); + smvp_tc_init(tc, mvpconf0); + ncpu = smvp_vpe_init(tc, mvpconf0, ncpu); } /* Release config state */ @@ -324,21 +273,6 @@ static void __init vsmp_smp_setup(void) static void __init vsmp_prepare_cpus(unsigned int max_cpus) { mips_mt_set_cpuoptions(); - - /* set up ipi interrupts */ - if (cpu_has_vint) { - set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - } - - cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; - cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; - - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); - - set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); - set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); } struct plat_smp_ops vsmp_smp_ops = { diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 9d41dab90a8..33780cc61ce 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -125,6 +126,8 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); + synchronise_count_slave(); + cpu_idle(); } @@ -287,6 +290,7 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); + synchronise_count_master(); } /* called from main before smp_init() */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 4705b3c11e5..3e863186cd2 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -331,7 +331,8 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) /* In general, all TCs should have the same cpu_data indications */ memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips)); /* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */ - if (cpu_data[0].cputype == CPU_34K) + if (cpu_data[0].cputype == CPU_34K || + cpu_data[0].cputype == CPU_1004K) cpu_data[cpu].options &= ~MIPS_CPU_FPU; cpu_data[cpu].vpe_id = vpe; cpu_data[cpu].tc_id = tc; diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c new file mode 100644 index 00000000000..9021108eb9c --- /dev/null +++ b/arch/mips/kernel/sync-r4k.c @@ -0,0 +1,159 @@ +/* + * Count register synchronisation. + * + * All CPUs will have their count registers synchronised to the CPU0 expirelo + * value. This can cause a small timewarp for CPU0. All other CPU's should + * not have done anything significant (but they may have had interrupts + * enabled briefly - prom_smp_finish() should not be responsible for enabling + * interrupts...) + * + * FIXME: broken for SMTC + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +static atomic_t __initdata count_start_flag = ATOMIC_INIT(0); +static atomic_t __initdata count_count_start = ATOMIC_INIT(0); +static atomic_t __initdata count_count_stop = ATOMIC_INIT(0); + +#define COUNTON 100 +#define NR_LOOPS 5 + +void __init synchronise_count_master(void) +{ + int i; + unsigned long flags; + unsigned int initcount; + int nslaves; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC needs to synchronise per VPE, not per CPU + * ignore for now + */ + return; +#endif + + pr_info("Checking COUNT synchronization across %u CPUs: ", + num_online_cpus()); + + local_irq_save(flags); + + /* + * Notify the slaves that it's time to start + */ + atomic_set(&count_start_flag, 1); + smp_wmb(); + + /* Count will be initialised to expirelo for all CPU's */ + initcount = expirelo; + + /* + * We loop a few times to get a primed instruction cache, + * then the last pass is more or less synchronised and + * the master and slaves each set their cycle counters to a known + * value all at once. This reduces the chance of having random offsets + * between the processors, and guarantees that the maximum + * delay between the cycle counters is never bigger than + * the latency of information-passing (cachelines) between + * two CPUs. + */ + + nslaves = num_online_cpus()-1; + for (i = 0; i < NR_LOOPS; i++) { + /* slaves loop on '!= ncpus' */ + while (atomic_read(&count_count_start) != nslaves) + mb(); + atomic_set(&count_count_stop, 0); + smp_wmb(); + + /* this lets the slaves write their count register */ + atomic_inc(&count_count_start); + + /* + * Everyone initialises count in the last loop: + */ + if (i == NR_LOOPS-1) + write_c0_count(initcount); + + /* + * Wait for all slaves to leave the synchronization point: + */ + while (atomic_read(&count_count_stop) != nslaves) + mb(); + atomic_set(&count_count_start, 0); + smp_wmb(); + atomic_inc(&count_count_stop); + } + /* Arrange for an interrupt in a short while */ + write_c0_compare(read_c0_count() + COUNTON); + + local_irq_restore(flags); + + /* + * i386 code reported the skew here, but the + * count registers were almost certainly out of sync + * so no point in alarming people + */ + printk("done.\n"); +} + +void __init synchronise_count_slave(void) +{ + int i; + unsigned long flags; + unsigned int initcount; + int ncpus; + +#ifdef CONFIG_MIPS_MT_SMTC + /* + * SMTC needs to synchronise per VPE, not per CPU + * ignore for now + */ + return; +#endif + + local_irq_save(flags); + + /* + * Not every cpu is online at the time this gets called, + * so we first wait for the master to say everyone is ready + */ + + while (!atomic_read(&count_start_flag)) + mb(); + + /* Count will be initialised to expirelo for all CPU's */ + initcount = expirelo; + + ncpus = num_online_cpus(); + for (i = 0; i < NR_LOOPS; i++) { + atomic_inc(&count_count_start); + while (atomic_read(&count_count_start) != ncpus) + mb(); + + /* + * Everyone initialises count in the last loop: + */ + if (i == NR_LOOPS-1) + write_c0_count(initcount); + + atomic_inc(&count_count_stop); + while (atomic_read(&count_count_stop) != ncpus) + mb(); + } + /* Arrange for an interrupt in a short while */ + write_c0_compare(read_c0_count() + COUNTON); + + local_irq_restore(flags); +} +#undef NR_LOOPS +#endif diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index d51f4e98455..88185cd40c3 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -80,19 +81,22 @@ void (*board_bind_eic_interrupt)(int irq, int regset); static void show_raw_backtrace(unsigned long reg29) { - unsigned long *sp = (unsigned long *)reg29; + unsigned long *sp = (unsigned long *)(reg29 & ~3); unsigned long addr; printk("Call Trace:"); #ifdef CONFIG_KALLSYMS printk("\n"); #endif - while (!kstack_end(sp)) { - addr = *sp++; - if (__kernel_text_address(addr)) - print_ip_sym(addr); +#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000) + if (IS_KVA01(sp)) { + while (!kstack_end(sp)) { + addr = *sp++; + if (__kernel_text_address(addr)) + print_ip_sym(addr); + } + printk("\n"); } - printk("\n"); } #ifdef CONFIG_KALLSYMS @@ -192,16 +196,19 @@ EXPORT_SYMBOL(dump_stack); static void show_code(unsigned int __user *pc) { long i; + unsigned short __user *pc16 = NULL; printk("\nCode:"); + if ((unsigned long)pc & 1) + pc16 = (unsigned short __user *)((unsigned long)pc & ~1); for(i = -3 ; i < 6 ; i++) { unsigned int insn; - if (__get_user(insn, pc + i)) { + if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) { printk(" (Bad address in epc)\n"); break; } - printk("%c%08x%c", (i?' ':'<'), insn, (i?' ':'>')); + printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>')); } } @@ -311,10 +318,21 @@ void show_regs(struct pt_regs *regs) void show_registers(const struct pt_regs *regs) { + const int field = 2 * sizeof(unsigned long); + __show_regs(regs); print_modules(); - printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n", - current->comm, task_pid_nr(current), current_thread_info(), current); + printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n", + current->comm, current->pid, current_thread_info(), current, + field, current_thread_info()->tp_value); + if (cpu_has_userlocal) { + unsigned long tls; + + tls = read_c0_userlocal(); + if (tls != current_thread_info()->tp_value) + printk("*HwTLS: %0*lx\n", field, tls); + } + show_stacktrace(current, regs); show_code((unsigned int __user *) regs->cp0_epc); printk("\n"); @@ -985,6 +1003,21 @@ asmlinkage void do_reserved(struct pt_regs *regs) (regs->cp0_cause & 0x7f) >> 2); } +static int __initdata l1parity = 1; +static int __init nol1parity(char *s) +{ + l1parity = 0; + return 1; +} +__setup("nol1par", nol1parity); +static int __initdata l2parity = 1; +static int __init nol2parity(char *s) +{ + l2parity = 0; + return 1; +} +__setup("nol2par", nol2parity); + /* * Some MIPS CPUs can enable/disable for cache parity detection, but do * it different ways. @@ -994,6 +1027,62 @@ static inline void parity_protection_init(void) switch (current_cpu_type()) { case CPU_24K: case CPU_34K: + case CPU_74K: + case CPU_1004K: + { +#define ERRCTL_PE 0x80000000 +#define ERRCTL_L2P 0x00800000 + unsigned long errctl; + unsigned int l1parity_present, l2parity_present; + + errctl = read_c0_ecc(); + errctl &= ~(ERRCTL_PE|ERRCTL_L2P); + + /* probe L1 parity support */ + write_c0_ecc(errctl | ERRCTL_PE); + back_to_back_c0_hazard(); + l1parity_present = (read_c0_ecc() & ERRCTL_PE); + + /* probe L2 parity support */ + write_c0_ecc(errctl|ERRCTL_L2P); + back_to_back_c0_hazard(); + l2parity_present = (read_c0_ecc() & ERRCTL_L2P); + + if (l1parity_present && l2parity_present) { + if (l1parity) + errctl |= ERRCTL_PE; + if (l1parity ^ l2parity) + errctl |= ERRCTL_L2P; + } else if (l1parity_present) { + if (l1parity) + errctl |= ERRCTL_PE; + } else if (l2parity_present) { + if (l2parity) + errctl |= ERRCTL_L2P; + } else { + /* No parity available */ + } + + printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl); + + write_c0_ecc(errctl); + back_to_back_c0_hazard(); + errctl = read_c0_ecc(); + printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl); + + if (l1parity_present) + printk(KERN_INFO "Cache parity protection %sabled\n", + (errctl & ERRCTL_PE) ? "en" : "dis"); + + if (l2parity_present) { + if (l1parity_present && l1parity) + errctl ^= ERRCTL_L2P; + printk(KERN_INFO "L2 cache parity protection %sabled\n", + (errctl & ERRCTL_L2P) ? "en" : "dis"); + } + } + break; + case CPU_5KC: write_c0_ecc(0x80000000); back_to_back_c0_hazard(); @@ -1353,7 +1442,6 @@ void __cpuinit per_cpu_trap_init(void) change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, status_set); -#ifdef CONFIG_CPU_MIPSR2 if (cpu_has_mips_r2) { unsigned int enable = 0x0000000f; @@ -1362,7 +1450,6 @@ void __cpuinit per_cpu_trap_init(void) write_c0_hwrena(enable); } -#endif #ifdef CONFIG_MIPS_MT_SMTC if (!secondaryTC) { diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile index b31d8dfed1b..f7f87fc09d1 100644 --- a/arch/mips/mips-boards/generic/Makefile +++ b/arch/mips/mips-boards/generic/Makefile @@ -20,6 +20,7 @@ obj-y := reset.o display.o init.o memory.o \ cmdline.o time.o +obj-y += amon.o obj-$(CONFIG_EARLY_PRINTK) += console.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c new file mode 100644 index 00000000000..b7633fda418 --- /dev/null +++ b/arch/mips/mips-boards/generic/amon.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2007 MIPS Technologies, Inc. + * All rights reserved. + + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Arbitrary Monitor interface + */ + +#include +#include +#include + +#include +#include +#include + +int amon_cpu_avail(int cpu) +{ + struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + + if (cpu < 0 || cpu >= NCPULAUNCH) { + pr_debug("avail: cpu%d is out of range\n", cpu); + return 0; + } + + launch += cpu; + if (!(launch->flags & LAUNCH_FREADY)) { + pr_debug("avail: cpu%d is not ready\n", cpu); + return 0; + } + if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { + pr_debug("avail: too late.. cpu%d is already gone\n", cpu); + return 0; + } + + return 1; +} + +void amon_cpu_start(int cpu, + unsigned long pc, unsigned long sp, + unsigned long gp, unsigned long a0) +{ + volatile struct cpulaunch *launch = + (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + + if (!amon_cpu_avail(cpu)) + return; + if (cpu == smp_processor_id()) { + pr_debug("launch: I am cpu%d!\n", cpu); + return; + } + launch += cpu; + + pr_debug("launch: starting cpu%d\n", cpu); + + launch->pc = pc; + launch->gp = gp; + launch->sp = sp; + launch->a0 = a0; + + /* Make sure target sees parameters before the go bit */ + smp_mb(); + + launch->flags |= LAUNCH_FGO; + while ((launch->flags & LAUNCH_FGONE) == 0) + ; + pr_debug("launch: cpu%d gone!\n", cpu); +} diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 07671fb9074..852b19492d8 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -424,6 +424,9 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif +#ifdef CONFIG_MIPS_CMP + register_smp_ops(&cmp_smp_ops); +#endif #ifdef CONFIG_MIPS_MT_SMP register_smp_ops(&vsmp_smp_ops); #endif diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index b50e0fc406a..4fe62fca994 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -55,16 +55,36 @@ unsigned long cpu_khz; static int mips_cpu_timer_irq; +static int mips_cpu_perf_irq; extern int cp0_perfcount_irq; +DEFINE_PER_CPU(unsigned int, tickcount); +#define tickcount_this_cpu __get_cpu_var(tickcount) +static unsigned long ledbitmask; + static void mips_timer_dispatch(void) { +#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) + /* + * Yes, this is very tacky, won't work as expected with SMTC and + * dyntick will break it, + * but it gives me a nice warm feeling during debug + */ +#define LEDBAR 0xbf000408 + if (tickcount_this_cpu++ >= HZ) { + tickcount_this_cpu = 0; + change_bit(smp_processor_id(), &ledbitmask); + smp_wmb(); /* Make sure every one else sees the change */ + /* This will pick up any recent changes made by other CPU's */ + *(unsigned int *)LEDBAR = ledbitmask; + } +#endif do_IRQ(mips_cpu_timer_irq); } static void mips_perf_dispatch(void) { - do_IRQ(cp0_perfcount_irq); + do_IRQ(mips_cpu_perf_irq); } /* @@ -129,19 +149,18 @@ unsigned long read_persistent_clock(void) void __init plat_perf_setup(void) { - cp0_perfcount_irq = -1; - #ifdef MSC01E_INT_BASE if (cpu_has_veic) { set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch); - cp0_perfcount_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; + mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; } else #endif if (cp0_perfcount_irq >= 0) { if (cpu_has_vint) set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); + mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; #ifdef CONFIG_SMP - set_irq_handler(cp0_perfcount_irq, handle_percpu_irq); + set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq); #endif } } diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 931ca4600a6..8dc6e2ac4c0 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -22,6 +22,7 @@ obj-y := malta_int.o malta_platform.o malta_setup.o obj-$(CONFIG_MTD) += malta_mtd.o +# FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index dbe60eb55e2..e1744ae855c 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include @@ -41,6 +42,14 @@ #include #include #include +#include +#include + +int gcmp_present = -1; +int gic_present; +static unsigned long _msc01_biu_base; +static unsigned long _gcmp_base; +static unsigned int ipi_map[NR_CPUS]; static DEFINE_SPINLOCK(mips_irq_lock); @@ -121,6 +130,17 @@ static void malta_hw0_irqdispatch(void) do_IRQ(MALTA_INT_BASE + irq); } +static void malta_ipi_irqdispatch(void) +{ + int irq; + + irq = gic_get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ + + do_IRQ(MIPS_GIC_IRQ_BASE + irq); +} + static void corehi_irqdispatch(void) { unsigned int intedge, intsteer, pcicmd, pcibadaddr; @@ -257,12 +277,61 @@ asmlinkage void plat_irq_dispatch(void) if (irq == MIPSCPU_INT_I8259A) malta_hw0_irqdispatch(); + else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) + malta_ipi_irqdispatch(); else if (irq >= 0) do_IRQ(MIPS_CPU_IRQ_BASE + irq); else spurious_interrupt(); } +#ifdef CONFIG_MIPS_MT_SMP + + +#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 +#define GIC_MIPS_CPU_IPI_CALL_IRQ 4 + +#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ +#define C_RESCHED C_SW0 +#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ +#define C_CALL C_SW1 +static int cpu_ipi_resched_irq, cpu_ipi_call_irq; + +static void ipi_resched_dispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); +} + +static void ipi_call_dispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); +} + +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = IRQF_DISABLED|IRQF_PERCPU, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = IRQF_DISABLED|IRQF_PERCPU, + .name = "IPI_call" +}; +#endif /* CONFIG_MIPS_MT_SMP */ + static struct irqaction i8259irq = { .handler = no_action, .name = "XT-PIC cascade" @@ -291,15 +360,90 @@ msc_irqmap_t __initdata msc_eicirqmap[] = { {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} }; + int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); +/* + * This GIC specific tabular array defines the association between External + * Interrupts and CPUs/Core Interrupts. The nature of the External + * Interrupts is also defined here - polarity/trigger. + */ +static struct gic_intr_map gic_intr_map[] = { + { GIC_EXT_INTR(0), X, X, X, X, 0 }, + { GIC_EXT_INTR(1), X, X, X, X, 0 }, + { GIC_EXT_INTR(2), X, X, X, X, 0 }, + { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(10), X, X, X, X, 0 }, + { GIC_EXT_INTR(11), X, X, X, X, 0 }, + { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(15), X, X, X, X, 0 }, + { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, +}; + +/* + * GCMP needs to be detected before any SMP initialisation + */ +int __init gcmp_probe(unsigned long addr, unsigned long size) +{ + if (gcmp_present >= 0) + return gcmp_present; + + _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); + gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; + + if (gcmp_present) + printk(KERN_DEBUG "GCMP present\n"); + return gcmp_present; +} + +void __init fill_ipi_map(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { + if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) + ipi_map[gic_intr_map[i].cpunum] |= + (1 << (gic_intr_map[i].pin + 2)); + } +} + void __init arch_init_irq(void) { + int gic_present, gcmp_present; + init_i8259_irqs(); if (!cpu_has_veic) mips_cpu_irq_init(); + gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + if (gcmp_present) { + GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; + gic_present = 1; + } else { + _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); + gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & + MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; + } + if (gic_present) + printk(KERN_DEBUG "GIC present\n"); + switch (mips_revision_sconid) { case MIPS_REVISION_SCON_SOCIT: case MIPS_REVISION_SCON_ROCIT: @@ -360,4 +504,206 @@ void __init arch_init_irq(void) setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); } + +#if defined(CONFIG_MIPS_MT_SMP) + if (gic_present) { + /* FIXME */ + int i; + struct { + unsigned int resched; + unsigned int call; + } ipiirq[] = { + { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, + { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 + }, { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 + }, { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 + } + }; +#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0])) + fill_ipi_map(); + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); + if (!gcmp_present) { + /* Enable the GIC */ + i = REG(_msc01_biu_base, MSC01_SC_CFG); + REG(_msc01_biu_base, MSC01_SC_CFG) = + (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); + pr_debug("GIC Enabled\n"); + } + + /* set up ipi interrupts */ + if (cpu_has_vint) { + set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); + set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); + } + /* Argh.. this really needs sorting out.. */ + printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status()); + write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); + printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); + write_c0_status(0x1100dc00); + printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); + for (i = 0; i < NIPI; i++) { + setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); + + set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); + set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); + } + } else { + /* set up ipi interrupts */ + if (cpu_has_veic) { + set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); + set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); + cpu_ipi_resched_irq = MSC01E_INT_SW0; + cpu_ipi_call_irq = MSC01E_INT_SW1; + } else { + if (cpu_has_vint) { + set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); + } + cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; + } + + setup_irq(cpu_ipi_resched_irq, &irq_resched); + setup_irq(cpu_ipi_call_irq, &irq_call); + + set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); + set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); + } +#endif +} + +void malta_be_init(void) +{ + if (gcmp_present) { + /* Could change CM error mask register */ + } +} + + +static char *tr[8] = { + "mem", "gcr", "gic", "mmio", + "0x04", "0x05", "0x06", "0x07" +}; + +static char *mcmd[32] = { + [0x00] = "0x00", + [0x01] = "Legacy Write", + [0x02] = "Legacy Read", + [0x03] = "0x03", + [0x04] = "0x04", + [0x05] = "0x05", + [0x06] = "0x06", + [0x07] = "0x07", + [0x08] = "Coherent Read Own", + [0x09] = "Coherent Read Share", + [0x0a] = "Coherent Read Discard", + [0x0b] = "Coherent Ready Share Always", + [0x0c] = "Coherent Upgrade", + [0x0d] = "Coherent Writeback", + [0x0e] = "0x0e", + [0x0f] = "0x0f", + [0x10] = "Coherent Copyback", + [0x11] = "Coherent Copyback Invalidate", + [0x12] = "Coherent Invalidate", + [0x13] = "Coherent Write Invalidate", + [0x14] = "Coherent Completion Sync", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "0x18", + [0x19] = "0x19", + [0x1a] = "0x1a", + [0x1b] = "0x1b", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +static char *core[8] = { + "Invalid/OK", "Invalid/Data", + "Shared/OK", "Shared/Data", + "Modified/OK", "Modified/Data", + "Exclusive/OK", "Exclusive/Data" +}; + +static char *causes[32] = { + "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", + "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", + "0x08", "0x09", "0x0a", "0x0b", + "0x0c", "0x0d", "0x0e", "0x0f", + "0x10", "0x11", "0x12", "0x13", + "0x14", "0x15", "0x16", "INTVN_WR_ERR", + "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", + "0x1c", "0x1d", "0x1e", "0x1f" +}; + +int malta_be_handler(struct pt_regs *regs, int is_fixup) +{ + /* This duplicates the handling in do_be which seems wrong */ + int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; + + if (gcmp_present) { + unsigned long cm_error = GCMPGCB(GCMEC); + unsigned long cm_addr = GCMPGCB(GCMEA); + unsigned long cm_other = GCMPGCB(GCMEO); + unsigned long cause, ocause; + char buf[256]; + + cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK); + if (cause != 0) { + cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF; + if (cause < 16) { + unsigned long cca_bits = (cm_error >> 15) & 7; + unsigned long tr_bits = (cm_error >> 12) & 7; + unsigned long mcmd_bits = (cm_error >> 7) & 0x1f; + unsigned long stag_bits = (cm_error >> 3) & 15; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "CCA=%lu TR=%s MCmd=%s STag=%lu " + "SPort=%lu\n", + cca_bits, tr[tr_bits], mcmd[mcmd_bits], + stag_bits, sport_bits); + } else { + /* glob state & sresp together */ + unsigned long c3_bits = (cm_error >> 18) & 7; + unsigned long c2_bits = (cm_error >> 15) & 7; + unsigned long c1_bits = (cm_error >> 12) & 7; + unsigned long c0_bits = (cm_error >> 9) & 7; + unsigned long sc_bit = (cm_error >> 8) & 1; + unsigned long mcmd_bits = (cm_error >> 3) & 0x1f; + unsigned long sport_bits = (cm_error >> 0) & 7; + snprintf(buf, sizeof(buf), + "C3=%s C2=%s C1=%s C0=%s SC=%s " + "MCmd=%s SPort=%lu\n", + core[c3_bits], core[c2_bits], + core[c1_bits], core[c0_bits], + sc_bit ? "True" : "False", + mcmd[mcmd_bits], sport_bits); + } + + ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >> + GCMP_GCB_GMEO_ERROR_2ND_SHF; + + printk("CM_ERROR=%08lx %s <%s>\n", cm_error, + causes[cause], buf); + printk("CM_ADDR =%08lx\n", cm_addr); + printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]); + + /* reprime cause register */ + GCMPGCB(GCMEC) = 0; + } + } + + return retval; } diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 2cd8f5734b3..4a0f21c76e7 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -36,6 +36,9 @@ #include #endif +extern void malta_be_init(void); +extern int malta_be_handler(struct pt_regs *regs, int is_fixup); + struct resource standard_io_resources[] = { { .name = "dma1", @@ -220,4 +223,7 @@ void __init plat_mem_setup(void) screen_info_setup(); #endif mips_reboot_setup(); + + board_be_init = malta_be_init; + board_be_handler = malta_be_handler; } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 3d3e5365134..643c8bcffff 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -54,6 +54,12 @@ static inline void r4k_on_each_cpu(void (*func) (void *info), void *info, preempt_enable(); } +#if defined(CONFIG_MIPS_CMP) +#define cpu_has_safe_index_cacheops 0 +#else +#define cpu_has_safe_index_cacheops 1 +#endif + /* * Must die. */ @@ -482,6 +488,8 @@ static inline void local_r4k_flush_cache_page(void *args) if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) { r4k_blast_dcache_page(addr); + if (exec && !cpu_icache_snoops_remote_store) + r4k_blast_scache_page(addr); } if (exec) { if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) { @@ -584,7 +592,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) * subset property so we have to flush the primary caches * explicitly */ - if (size >= dcache_size) { + if (cpu_has_safe_index_cacheops && size >= dcache_size) { r4k_blast_dcache(); } else { R4600_HIT_CACHEOP_WAR_IMPL; @@ -607,7 +615,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) return; } - if (size >= dcache_size) { + if (cpu_has_safe_index_cacheops && size >= dcache_size) { r4k_blast_dcache(); } else { R4600_HIT_CACHEOP_WAR_IMPL; @@ -969,6 +977,7 @@ static void __cpuinit probe_pcache(void) case CPU_24K: case CPU_34K: case CPU_74K: + case CPU_1004K: if ((read_c0_config7() & (1 << 16))) { /* effectively physically indexed dcache, thus no virtual aliases. */ @@ -1265,6 +1274,20 @@ static void __cpuinit coherency_setup(void) } } +#if defined(CONFIG_DMA_NONCOHERENT) + +static int __cpuinitdata coherentio; + +static int __init setcoherentio(char *str) +{ + coherentio = 1; + + return 1; +} + +__setup("coherentio", setcoherentio); +#endif + void __cpuinit r4k_cache_init(void) { extern void build_clear_page(void); @@ -1324,14 +1347,22 @@ void __cpuinit r4k_cache_init(void) flush_data_cache_page = r4k_flush_data_cache_page; flush_icache_range = r4k_flush_icache_range; -#ifdef CONFIG_DMA_NONCOHERENT - _dma_cache_wback_inv = r4k_dma_cache_wback_inv; - _dma_cache_wback = r4k_dma_cache_wback_inv; - _dma_cache_inv = r4k_dma_cache_inv; +#if defined(CONFIG_DMA_NONCOHERENT) + if (coherentio) { + _dma_cache_wback_inv = (void *)cache_noop; + _dma_cache_wback = (void *)cache_noop; + _dma_cache_inv = (void *)cache_noop; + } else { + _dma_cache_wback_inv = r4k_dma_cache_wback_inv; + _dma_cache_wback = r4k_dma_cache_wback_inv; + _dma_cache_inv = r4k_dma_cache_inv; + } #endif build_clear_page(); build_copy_page(); +#if !defined(CONFIG_MIPS_CMP) local_r4k___flush_cache_all(NULL); +#endif coherency_setup(); } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 235833af3a8..05ac6c6123c 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -221,7 +221,7 @@ void copy_user_highpage(struct page *to, struct page *from, copy_page(vto, vfrom); kunmap_atomic(vfrom, KM_USER0); } - if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) || + if ((!cpu_has_ic_fills_f_dc) || pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) flush_data_cache_page((unsigned long)vto); kunmap_atomic(vto, KM_USER1); diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index aa52aa146ce..b5f6f71b27b 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -80,6 +80,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_24K: case CPU_25KF: case CPU_34K: + case CPU_1004K: case CPU_74K: case CPU_SB1: case CPU_SB1A: diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index ccbea229a0e..ca65469d7e3 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -32,8 +32,11 @@ #define M_COUNTER_OVERFLOW (1UL << 31) #ifdef CONFIG_MIPS_MT_SMP -#define WHAT (M_TC_EN_VPE | M_PERFCTL_VPEID(smp_processor_id())) -#define vpe_id() smp_processor_id() +static int cpu_has_mipsmt_pertccounters; +#define WHAT (M_TC_EN_VPE | \ + M_PERFCTL_VPEID(cpu_data[smp_processor_id()].vpe_id)) +#define vpe_id() (cpu_has_mipsmt_pertccounters ? \ + 0 : cpu_data[smp_processor_id()].vpe_id) /* * The number of bits to shift to convert between counters per core and @@ -243,11 +246,11 @@ static inline int __n_counters(void) { if (!(read_c0_config1() & M_CONFIG1_PC)) return 0; - if (!(r_c0_perfctrl0() & M_PERFCTL_MORE)) + if (!(read_c0_perfctrl0() & M_PERFCTL_MORE)) return 1; - if (!(r_c0_perfctrl1() & M_PERFCTL_MORE)) + if (!(read_c0_perfctrl1() & M_PERFCTL_MORE)) return 2; - if (!(r_c0_perfctrl2() & M_PERFCTL_MORE)) + if (!(read_c0_perfctrl2() & M_PERFCTL_MORE)) return 3; return 4; @@ -274,8 +277,9 @@ static inline int n_counters(void) return counters; } -static inline void reset_counters(int counters) +static void reset_counters(void *arg) { + int counters = (int)arg; switch (counters) { case 4: w_c0_perfctrl3(0); @@ -302,9 +306,12 @@ static int __init mipsxx_init(void) return -ENODEV; } - reset_counters(counters); - - counters = counters_total_to_per_cpu(counters); +#ifdef CONFIG_MIPS_MT_SMP + cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19); + if (!cpu_has_mipsmt_pertccounters) + counters = counters_total_to_per_cpu(counters); +#endif + on_each_cpu(reset_counters, (void *)counters, 0, 1); op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_type()) { @@ -320,6 +327,13 @@ static int __init mipsxx_init(void) op_model_mipsxx_ops.cpu_type = "mips/25K"; break; + case CPU_1004K: +#if 0 + /* FIXME: report as 34K for now */ + op_model_mipsxx_ops.cpu_type = "mips/1004K"; + break; +#endif + case CPU_34K: op_model_mipsxx_ops.cpu_type = "mips/34K"; break; @@ -365,7 +379,7 @@ static void mipsxx_exit(void) int counters = op_model_mipsxx_ops.num_counters; counters = counters_per_cpu_to_total(counters); - reset_counters(counters); + on_each_cpu(reset_counters, (void *)counters, 0, 1); perf_irq = null_perf_irq; } diff --git a/include/asm-mips/cmp.h b/include/asm-mips/cmp.h new file mode 100644 index 00000000000..89a73fb93ae --- /dev/null +++ b/include/asm-mips/cmp.h @@ -0,0 +1,18 @@ +#ifndef _ASM_CMP_H +#define _ASM_CMP_H + +/* + * Definitions for CMP multitasking on MIPS cores + */ +struct task_struct; + +extern void cmp_smp_setup(void); +extern void cmp_smp_finish(void); +extern void cmp_boot_secondary(int cpu, struct task_struct *t); +extern void cmp_init_secondary(void); +extern void cmp_cpus_done(void); +extern void cmp_prepare_cpus(unsigned int max_cpus); + +/* This is platform specific */ +extern void cmp_send_ipi(int cpu, unsigned int action); +#endif /* _ASM_CMP_H */ diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index bf5bbc78a9f..6d04ea91225 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -89,6 +89,7 @@ #define PRID_IMP_34K 0x9500 #define PRID_IMP_24KE 0x9600 #define PRID_IMP_74K 0x9700 +#define PRID_IMP_1004K 0x9900 #define PRID_IMP_LOONGSON1 0x4200 #define PRID_IMP_LOONGSON2 0x6300 @@ -194,9 +195,9 @@ enum cpu_type_enum { /* * MIPS32 class processors */ - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000, - CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, CPU_AU1550, - CPU_PR4450, CPU_BCM3302, CPU_BCM4710, + CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, + CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, + CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, /* * MIPS64 class processors diff --git a/include/asm-mips/gcmpregs.h b/include/asm-mips/gcmpregs.h new file mode 100644 index 00000000000..d74a8a4ca86 --- /dev/null +++ b/include/asm-mips/gcmpregs.h @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000, 07 MIPS Technologies, Inc. + * + * Multiprocessor Subsystem Register Definitions + * + */ +#ifndef _ASM_GCMPREGS_H +#define _ASM_GCMPREGS_H + + +/* Offsets to major blocks within GCMP from GCMP base */ +#define GCMP_GCB_OFS 0x0000 /* Global Control Block */ +#define GCMP_CLCB_OFS 0x2000 /* Core Local Control Block */ +#define GCMP_COCB_OFS 0x4000 /* Core Other Control Block */ +#define GCMP_GDB_OFS 0x8000 /* Global Debug Block */ + +/* Offsets to individual GCMP registers from GCMP base */ +#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) + +#define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg) +#define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg) +#define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg) +#define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg) + +/* GCMP register access */ +#define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) +#define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) +#define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) +#define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) + +/* Mask generation */ +#define GCMPMSK(block, reg, bits) (MSK(bits)< +#include + +/* malta_smtc */ +#include +#include + +/* malta_cmp */ +#include + +/* malta_smvp */ +#include diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h index 5a2f8a3a6a1..c9420aa97e3 100644 --- a/include/asm-mips/mipsmtregs.h +++ b/include/asm-mips/mipsmtregs.h @@ -197,8 +197,8 @@ static inline void __raw_evpe(void) " .set pop \n"); } -/* Enable multiMT if previous suggested it should be. - EMT_ENABLE to force */ +/* Enable virtual processor execution if previous suggested it should be. + EVPE_ENABLE to force */ #define EVPE_ENABLE MVPCONTROL_EVP @@ -238,8 +238,8 @@ static inline void __raw_emt(void) " .set reorder"); } -/* enable multiVPE if previous suggested it should be. - EVPE_ENABLE to force */ +/* enable multi-threaded execution if previous suggested it should be. + EMT_ENABLE to force */ #define EMT_ENABLE VPECONTROL_TE diff --git a/include/asm-mips/r4k-timer.h b/include/asm-mips/r4k-timer.h new file mode 100644 index 00000000000..a37d12b3b61 --- /dev/null +++ b/include/asm-mips/r4k-timer.h @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 by Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_R4K_TYPES_H +#define __ASM_R4K_TYPES_H + +#include + +#ifdef CONFIG_SYNC_R4K + +extern void synchronise_count_master(void); +extern void synchronise_count_slave(void); + +#else + +static inline void synchronise_count_master(void) +{ +} + +static inline void synchronise_count_slave(void) +{ +} + +#endif + +#endif /* __ASM_R4K_TYPES_H */ diff --git a/include/asm-mips/smp-ops.h b/include/asm-mips/smp-ops.h index b17fdfb5d81..43c207e72a6 100644 --- a/include/asm-mips/smp-ops.h +++ b/include/asm-mips/smp-ops.h @@ -51,6 +51,7 @@ static inline void register_smp_ops(struct plat_smp_ops *ops) #endif /* !CONFIG_SMP */ extern struct plat_smp_ops up_smp_ops; +extern struct plat_smp_ops cmp_smp_ops; extern struct plat_smp_ops vsmp_smp_ops; #endif /* __ASM_SMP_OPS_H */ diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h index ff3e8936b49..3639b28f80d 100644 --- a/include/asm-mips/smtc.h +++ b/include/asm-mips/smtc.h @@ -44,6 +44,7 @@ extern int mipsmt_build_cpu_map(int startslot); extern void mipsmt_prepare_cpus(void); extern void smtc_smp_finish(void); extern void smtc_boot_secondary(int cpu, struct task_struct *t); +extern void smtc_cpus_done(void); /* * Sharing the TLB between multiple VPEs means that the diff --git a/include/asm-mips/smvp.h b/include/asm-mips/smvp.h new file mode 100644 index 00000000000..0d0e80a39e8 --- /dev/null +++ b/include/asm-mips/smvp.h @@ -0,0 +1,19 @@ +#ifndef _ASM_SMVP_H +#define _ASM_SMVP_H + +/* + * Definitions for SMVP multitasking on MIPS MT cores + */ +struct task_struct; + +extern void smvp_smp_setup(void); +extern void smvp_smp_finish(void); +extern void smvp_boot_secondary(int cpu, struct task_struct *t); +extern void smvp_init_secondary(void); +extern void smvp_smp_finish(void); +extern void smvp_cpus_done(void); +extern void smvp_prepare_cpus(unsigned int max_cpus); + +/* This is platform specific */ +extern void smvp_send_ipi(int cpu, unsigned int action); +#endif /* _ASM_SMVP_H */ -- cgit v1.2.3-70-g09d2 From a92b05880d261e9017ef8e7d5b6b01e0e5aa991d Mon Sep 17 00:00:00 2001 From: Daniel Laird Date: Thu, 6 Mar 2008 09:07:18 +0000 Subject: [MIPS] Move arch/mips/philips to arch/mips/nxp Signed-off-by: daniel.j.laird Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 +- arch/mips/Makefile | 12 +- arch/mips/kernel/cpu-probe.c | 8 +- arch/mips/nxp/pnx8550/common/Makefile | 29 +++ arch/mips/nxp/pnx8550/common/gdb_hook.c | 109 +++++++++++ arch/mips/nxp/pnx8550/common/int.c | 238 +++++++++++++++++++++++++ arch/mips/nxp/pnx8550/common/pci.c | 133 ++++++++++++++ arch/mips/nxp/pnx8550/common/platform.c | 132 ++++++++++++++ arch/mips/nxp/pnx8550/common/proc.c | 112 ++++++++++++ arch/mips/nxp/pnx8550/common/prom.c | 129 ++++++++++++++ arch/mips/nxp/pnx8550/common/reset.c | 49 +++++ arch/mips/nxp/pnx8550/common/setup.c | 157 ++++++++++++++++ arch/mips/nxp/pnx8550/common/time.c | 150 ++++++++++++++++ arch/mips/nxp/pnx8550/jbs/Makefile | 4 + arch/mips/nxp/pnx8550/jbs/board_setup.c | 65 +++++++ arch/mips/nxp/pnx8550/jbs/init.c | 53 ++++++ arch/mips/nxp/pnx8550/jbs/irqmap.c | 35 ++++ arch/mips/nxp/pnx8550/stb810/Makefile | 4 + arch/mips/nxp/pnx8550/stb810/board_setup.c | 49 +++++ arch/mips/nxp/pnx8550/stb810/irqmap.c | 22 +++ arch/mips/nxp/pnx8550/stb810/prom_init.c | 46 +++++ arch/mips/philips/pnx8550/common/Makefile | 29 --- arch/mips/philips/pnx8550/common/gdb_hook.c | 109 ----------- arch/mips/philips/pnx8550/common/int.c | 238 ------------------------- arch/mips/philips/pnx8550/common/pci.c | 133 -------------- arch/mips/philips/pnx8550/common/platform.c | 132 -------------- arch/mips/philips/pnx8550/common/proc.c | 112 ------------ arch/mips/philips/pnx8550/common/prom.c | 129 -------------- arch/mips/philips/pnx8550/common/reset.c | 49 ----- arch/mips/philips/pnx8550/common/setup.c | 157 ---------------- arch/mips/philips/pnx8550/common/time.c | 150 ---------------- arch/mips/philips/pnx8550/jbs/Makefile | 4 - arch/mips/philips/pnx8550/jbs/board_setup.c | 65 ------- arch/mips/philips/pnx8550/jbs/init.c | 53 ------ arch/mips/philips/pnx8550/jbs/irqmap.c | 36 ---- arch/mips/philips/pnx8550/stb810/Makefile | 4 - arch/mips/philips/pnx8550/stb810/board_setup.c | 49 ----- arch/mips/philips/pnx8550/stb810/irqmap.c | 23 --- arch/mips/philips/pnx8550/stb810/prom_init.c | 46 ----- include/asm-mips/cpu.h | 2 +- 40 files changed, 1529 insertions(+), 1531 deletions(-) create mode 100644 arch/mips/nxp/pnx8550/common/Makefile create mode 100644 arch/mips/nxp/pnx8550/common/gdb_hook.c create mode 100644 arch/mips/nxp/pnx8550/common/int.c create mode 100644 arch/mips/nxp/pnx8550/common/pci.c create mode 100644 arch/mips/nxp/pnx8550/common/platform.c create mode 100644 arch/mips/nxp/pnx8550/common/proc.c create mode 100644 arch/mips/nxp/pnx8550/common/prom.c create mode 100644 arch/mips/nxp/pnx8550/common/reset.c create mode 100644 arch/mips/nxp/pnx8550/common/setup.c create mode 100644 arch/mips/nxp/pnx8550/common/time.c create mode 100644 arch/mips/nxp/pnx8550/jbs/Makefile create mode 100644 arch/mips/nxp/pnx8550/jbs/board_setup.c create mode 100644 arch/mips/nxp/pnx8550/jbs/init.c create mode 100644 arch/mips/nxp/pnx8550/jbs/irqmap.c create mode 100644 arch/mips/nxp/pnx8550/stb810/Makefile create mode 100644 arch/mips/nxp/pnx8550/stb810/board_setup.c create mode 100644 arch/mips/nxp/pnx8550/stb810/irqmap.c create mode 100644 arch/mips/nxp/pnx8550/stb810/prom_init.c delete mode 100644 arch/mips/philips/pnx8550/common/Makefile delete mode 100644 arch/mips/philips/pnx8550/common/gdb_hook.c delete mode 100644 arch/mips/philips/pnx8550/common/int.c delete mode 100644 arch/mips/philips/pnx8550/common/pci.c delete mode 100644 arch/mips/philips/pnx8550/common/platform.c delete mode 100644 arch/mips/philips/pnx8550/common/proc.c delete mode 100644 arch/mips/philips/pnx8550/common/prom.c delete mode 100644 arch/mips/philips/pnx8550/common/reset.c delete mode 100644 arch/mips/philips/pnx8550/common/setup.c delete mode 100644 arch/mips/philips/pnx8550/common/time.c delete mode 100644 arch/mips/philips/pnx8550/jbs/Makefile delete mode 100644 arch/mips/philips/pnx8550/jbs/board_setup.c delete mode 100644 arch/mips/philips/pnx8550/jbs/init.c delete mode 100644 arch/mips/philips/pnx8550/jbs/irqmap.c delete mode 100644 arch/mips/philips/pnx8550/stb810/Makefile delete mode 100644 arch/mips/philips/pnx8550/stb810/board_setup.c delete mode 100644 arch/mips/philips/pnx8550/stb810/irqmap.c delete mode 100644 arch/mips/philips/pnx8550/stb810/prom_init.c (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 89b03775a19..9e1fc966895 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -310,12 +310,12 @@ config MACH_VR41XX select GENERIC_HARDIRQS_NO__DO_IRQ config PNX8550_JBS - bool "Philips PNX8550 based JBS board" + bool "NXP PNX8550 based JBS board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN config PNX8550_STB810 - bool "Philips PNX8550 based STB810 board" + bool "NXP PNX8550 based STB810 board" select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1c62381f5c2..69648d01acc 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -410,21 +410,21 @@ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 load-$(CONFIG_TANBAC_TB022X) += 0xffffffff80000000 # -# Common Philips PNX8550 +# Common NXP PNX8550 # -core-$(CONFIG_SOC_PNX8550) += arch/mips/philips/pnx8550/common/ +core-$(CONFIG_SOC_PNX8550) += arch/mips/nxp/pnx8550/common/ cflags-$(CONFIG_SOC_PNX8550) += -Iinclude/asm-mips/mach-pnx8550 # -# Philips PNX8550 JBS board +# NXP PNX8550 JBS board # -libs-$(CONFIG_PNX8550_JBS) += arch/mips/philips/pnx8550/jbs/ +libs-$(CONFIG_PNX8550_JBS) += arch/mips/nxp/pnx8550/jbs/ #cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 -# Philips PNX8550 STB810 board +# NXP PNX8550 STB810 board # -libs-$(CONFIG_PNX8550_STB810) += arch/mips/philips/pnx8550/stb810/ +libs-$(CONFIG_PNX8550_STB810) += arch/mips/nxp/pnx8550/stb810/ load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 # NEC EMMA2RH boards diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index a742a967169..335a6ae3d59 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -790,7 +790,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c) } } -static inline void cpu_probe_philips(struct cpuinfo_mips *c) +static inline void cpu_probe_nxp(struct cpuinfo_mips *c) { decode_configs(c); switch (c->processor_id & 0xff00) { @@ -799,7 +799,7 @@ static inline void cpu_probe_philips(struct cpuinfo_mips *c) c->isa_level = MIPS_CPU_ISA_M32R1; break; default: - panic("Unknown Philips Core!"); /* REVISIT: die? */ + panic("Unknown NXP Core!"); /* REVISIT: die? */ break; } } @@ -938,8 +938,8 @@ __cpuinit void cpu_probe(void) case PRID_COMP_SANDCRAFT: cpu_probe_sandcraft(c); break; - case PRID_COMP_PHILIPS: - cpu_probe_philips(c); + case PRID_COMP_NXP: + cpu_probe_nxp(c); break; default: c->cputype = CPU_UNKNOWN; diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile new file mode 100644 index 00000000000..31cc1a5cec3 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/Makefile @@ -0,0 +1,29 @@ +# +# Per Hallsmark, per.hallsmark@mvista.com +# +# ######################################################################## +# +# This program is free software; you can distribute it and/or modify it +# under the terms of the GNU General Public License (Version 2) as +# published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +# +# ####################################################################### +# +# Makefile for the PNX8550 specific kernel interface routines +# under Linux. +# + +obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_KGDB) += gdb_hook.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c new file mode 100644 index 00000000000..ad4624f6d9b --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/gdb_hook.c @@ -0,0 +1,109 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * This is the interface to the remote debugger stub. + * + */ +#include +#include +#include +#include +#include + +#include +#include + +#include + +static struct serial_state rs_table[IP3106_NR_PORTS] = { +}; +static struct async_struct kdb_port_info = {0}; + +void rs_kgdb_hook(int tty_no) +{ + struct serial_state *ser = &rs_table[tty_no]; + + kdb_port_info.state = ser; + kdb_port_info.magic = SERIAL_MAGIC; + kdb_port_info.port = tty_no; + kdb_port_info.flags = ser->flags; + + /* + * Clear all interrupts + */ + /* Clear all the transmitter FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; + /* Clear all the receiver FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; + /* Clear all interrupts */ + ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | + IP3106_UART_INT_ALLTX; + + /* + * Now, initialize the UART + */ + ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; + ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud +} + +int putDebugChar(char c) +{ + /* Wait until FIFO not full */ + while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) + ; + /* Send one char */ + ip3106_fifo(UART_BASE, kdb_port_info.port) = c; + + return 1; +} + +char getDebugChar(void) +{ + char ch; + + /* Wait until there is a char in the FIFO */ + while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & + IP3106_UART_FIFO_RXFIFO) >> 8)) + ; + /* Read one char */ + ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & + IP3106_UART_FIFO_RBRTHR; + /* Advance the RX FIFO read pointer */ + ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; + return (ch); +} + +void rs_disable_debug_interrupts(void) +{ + ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ +} + +void rs_enable_debug_interrupts(void) +{ + /* Clear all the transmitter FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; + /* Clear all the receiver FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; + /* Clear all interrupts */ + ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | + IP3106_UART_INT_ALLTX; + ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ +} diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c new file mode 100644 index 00000000000..aad03429a5e --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -0,0 +1,238 @@ +/* + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + * Ported to 2.6. + * + * Per Hallsmark, per.hallsmark@mvista.com + * Copyright (C) 2000, 2001 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * + * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* default prio for interrupts */ +/* first one is a no-no so therefore always prio 0 (disabled) */ +static char gic_prio[PNX8550_INT_GIC_TOTINT] = { + 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49 + 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69 + 1 // 70 +}; + +static void hw0_irqdispatch(int irq) +{ + /* find out which interrupt */ + irq = PNX8550_GIC_VECTOR_0 >> 3; + + if (irq == 0) { + printk("hw0_irqdispatch: irq 0, spurious interrupt?\n"); + return; + } + do_IRQ(PNX8550_INT_GIC_MIN + irq); +} + + +static void timer_irqdispatch(int irq) +{ + irq = (0x01c0 & read_c0_config7()) >> 6; + + if (unlikely(irq == 0)) { + printk("timer_irqdispatch: irq 0, spurious interrupt?\n"); + return; + } + + if (irq & 0x1) + do_IRQ(PNX8550_INT_TIMER1); + if (irq & 0x2) + do_IRQ(PNX8550_INT_TIMER2); + if (irq & 0x4) + do_IRQ(PNX8550_INT_TIMER3); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP2) + hw0_irqdispatch(2); + else if (pending & STATUSF_IP7) { + if (read_c0_config7() & 0x01c0) + timer_irqdispatch(7); + } else + spurious_interrupt(); +} + +static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) +{ + unsigned long status = read_c0_status(); + + status &= ~((clr_mask & 0xFF) << 8); + status |= (set_mask & 0xFF) << 8; + + write_c0_status(status); +} + +static inline void mask_gic_int(unsigned int irq_nr) +{ + /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */ + PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */ +} + +static inline void unmask_gic_int(unsigned int irq_nr) +{ + /* set prio mask to lower four bits and enable interrupt */ + PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr]; +} + +static inline void mask_irq(unsigned int irq_nr) +{ + if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { + modify_cp0_intmask(1 << irq_nr, 0); + } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_GIC_MAX)) { + mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); + } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_TIMER_MAX)) { + modify_cp0_intmask(1 << 7, 0); + } else { + printk("mask_irq: irq %d doesn't exist!\n", irq_nr); + } +} + +static inline void unmask_irq(unsigned int irq_nr) +{ + if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { + modify_cp0_intmask(0, 1 << irq_nr); + } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_GIC_MAX)) { + unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); + } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_TIMER_MAX)) { + modify_cp0_intmask(0, 1 << 7); + } else { + printk("mask_irq: irq %d doesn't exist!\n", irq_nr); + } +} + +int pnx8550_set_gic_priority(int irq, int priority) +{ + int gic_irq = irq-PNX8550_INT_GIC_MIN; + int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf; + + gic_prio[gic_irq] = priority; + PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]); + + return prev_priority; +} + +static struct irq_chip level_irq_type = { + .name = "PNX Level IRQ", + .ack = mask_irq, + .mask = mask_irq, + .mask_ack = mask_irq, + .unmask = unmask_irq, +}; + +static struct irqaction gic_action = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "GIC", +}; + +static struct irqaction timer_action = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "Timer", +}; + +void __init arch_init_irq(void) +{ + int i; + int configPR; + + for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { + set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); + mask_irq(i); /* mask the irq just in case */ + } + + /* init of GIC/IPC interrupts */ + /* should be done before cp0 since cp0 init enables the GIC int */ + for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) { + int gic_int_line = i - PNX8550_INT_GIC_MIN; + if (gic_int_line == 0 ) + continue; // don't fiddle with int 0 + /* + * enable change of TARGET, ENABLE and ACTIVE_LOW bits + * set TARGET 0 to route through hw0 interrupt + * set ACTIVE_LOW 0 active high (correct?) + * + * We really should setup an interrupt description table + * to do this nicely. + * Note, PCI INTA is active low on the bus, but inverted + * in the GIC, so to us it's active high. + */ + PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000; + + /* mask/priority is still 0 so we will not get any + * interrupts until it is unmasked */ + + set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); + } + + /* Priority level 0 */ + PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0; + + /* Set int vector table address */ + PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0; + + set_irq_chip_and_handler(MIPS_CPU_GIC_IRQ, &level_irq_type, + handle_level_irq); + setup_irq(MIPS_CPU_GIC_IRQ, &gic_action); + + /* init of Timer interrupts */ + for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) + set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); + + /* Stop Timer 1-3 */ + configPR = read_c0_config7(); + configPR |= 0x00000038; + write_c0_config7(configPR); + + set_irq_chip_and_handler(MIPS_CPU_TIMER_IRQ, &level_irq_type, + handle_level_irq); + setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action); +} + +EXPORT_SYMBOL(pnx8550_set_gic_priority); diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c new file mode 100644 index 00000000000..eee4f3dfc41 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/pci.c @@ -0,0 +1,133 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include + +#include +#include +#include + +static struct resource pci_io_resource = { + .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ + .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, + .name = "pci IO space", + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .start = PNX8550_PCIMEM, + .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, + .name = "pci memory space", + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops pnx8550_pci_ops; + +static struct pci_controller pnx8550_controller = { + .pci_ops = &pnx8550_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ +static inline unsigned long get_system_mem_size(void) +{ + /* Read IP2031_RANK0_ADDR_LO */ + unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); + /* Read IP2031_RANK1_ADDR_HI */ + unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); + + return dram_r1_hi - dram_r0_lo + 1; +} + +static int __init pnx8550_pci_setup(void) +{ + int pci_mem_code; + int mem_size = get_system_mem_size() >> 20; + + /* Clear the Global 2 Register, PCI Inta Output Enable Registers + Bit 1:Enable DAC Powerdown + -> 0:DACs are enabled and are working normally + 1:DACs are powerdown + Bit 0:Enable of PCI inta output + -> 0 = Disable PCI inta output + 1 = Enable PCI inta output + */ + PNX8550_GLB2_ENAB_INTA_O = 0; + + /* Calc the PCI mem size code */ + if (mem_size >= 128) + pci_mem_code = SIZE_128M; + else if (mem_size >= 64) + pci_mem_code = SIZE_64M; + else if (mem_size >= 32) + pci_mem_code = SIZE_32M; + else + pci_mem_code = SIZE_16M; + + /* Set PCI_XIO registers */ + outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); + outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); + outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); + outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); + + /* Send memory transaction via PCI_BASE2 */ + outl(0x00000001, PCI_BASE | PCI_IO); + + /* Unlock the setup register */ + outl(0xca, PCI_BASE | PCI_UNLOCKREG); + + /* + * BAR0 of PNX8550 (pci base 10) must be zero in order for ide + * to work, and in order for bus_to_baddr to work without any + * hacks. + */ + outl(0x00000000, PCI_BASE | PCI_BASE10); + + /* + *These two bars are set by default or the boot code. + * However, it's safer to set them here so we're not boot + * code dependent. + */ + outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ + outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ + + outl(PCI_EN_TA | + PCI_EN_PCI2MMI | + PCI_EN_XIO | + PCI_SETUP_BASE18_SIZE(SIZE_32M) | + PCI_SETUP_BASE18_EN | + PCI_SETUP_BASE14_EN | + PCI_SETUP_BASE10_PREF | + PCI_SETUP_BASE10_SIZE(pci_mem_code) | + PCI_SETUP_CFGMANAGE_EN | + PCI_SETUP_PCIARB_EN, + PCI_BASE | + PCI_SETUP); /* PCI_SETUP */ + outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ + + register_pci_controller(&pnx8550_controller); + + return 0; +} + +arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c new file mode 100644 index 00000000000..c7c763dbe58 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/platform.c @@ -0,0 +1,132 @@ +/* + * Platform device support for NXP PNX8550 SoCs + * + * Copyright 2005, Embedded Alley Solutions, Inc + * + * Based on arch/mips/au1000/common/platform.c + * Platform device support for Au1x00 SoCs. + * + * Copyright 2004, Matt Porter + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct resource pnx8550_usb_ohci_resources[] = { + [0] = { + .start = PNX8550_USB_OHCI_OP_BASE, + .end = PNX8550_USB_OHCI_OP_BASE + + PNX8550_USB_OHCI_OP_LEN, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8550_INT_USB, + .end = PNX8550_INT_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource pnx8550_uart_resources[] = { + [0] = { + .start = PNX8550_UART_PORT0, + .end = PNX8550_UART_PORT0 + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8550_UART_INT(0), + .end = PNX8550_UART_INT(0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = PNX8550_UART_PORT1, + .end = PNX8550_UART_PORT1 + 0xfff, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = PNX8550_UART_INT(1), + .end = PNX8550_UART_INT(1), + .flags = IORESOURCE_IRQ, + }, +}; + +struct pnx8xxx_port pnx8xxx_ports[] = { + [0] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX8550_UART_PORT0, + .mapbase = PNX8550_UART_PORT0, + .irq = PNX8550_UART_INT(0), + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX8550_UART_PORT1, + .mapbase = PNX8550_UART_PORT1, + .irq = PNX8550_UART_INT(1), + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, +}; + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static u64 uart_dmamask = ~(u32)0; + +static struct platform_device pnx8550_usb_ohci_device = { + .name = "pnx8550-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), + .resource = pnx8550_usb_ohci_resources, +}; + +static struct platform_device pnx8550_uart_device = { + .name = "pnx8xxx-uart", + .id = -1, + .dev = { + .dma_mask = &uart_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = pnx8xxx_ports, + }, + .num_resources = ARRAY_SIZE(pnx8550_uart_resources), + .resource = pnx8550_uart_resources, +}; + +static struct platform_device *pnx8550_platform_devices[] __initdata = { + &pnx8550_usb_ohci_device, + &pnx8550_uart_device, +}; + +static int __init pnx8550_platform_init(void) +{ + return platform_add_devices(pnx8550_platform_devices, + ARRAY_SIZE(pnx8550_platform_devices)); +} + +arch_initcall(pnx8550_platform_init); diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c new file mode 100644 index 00000000000..18b125e3b65 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -0,0 +1,112 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +static int pnx8550_timers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) +{ + int len = 0; + int configPR = read_c0_config7(); + + if (offset==0) { + len += sprintf(&page[len], "Timer: count, compare, tc, status\n"); + len += sprintf(&page[len], " 1: %11i, %8i, %1i, %s\n", + read_c0_count(), read_c0_compare(), + (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on"); + len += sprintf(&page[len], " 2: %11i, %8i, %1i, %s\n", + read_c0_count2(), read_c0_compare2(), + (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on"); + len += sprintf(&page[len], " 3: %11i, %8i, %1i, %s\n", + read_c0_count3(), read_c0_compare3(), + (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on"); + } + + return len; +} + +static int pnx8550_registers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) +{ + int len = 0; + + if (offset==0) { + len += sprintf(&page[len], "config1: %#10.8x\n", read_c0_config1()); + len += sprintf(&page[len], "config2: %#10.8x\n", read_c0_config2()); + len += sprintf(&page[len], "config3: %#10.8x\n", read_c0_config3()); + len += sprintf(&page[len], "configPR: %#10.8x\n", read_c0_config7()); + len += sprintf(&page[len], "status: %#10.8x\n", read_c0_status()); + len += sprintf(&page[len], "cause: %#10.8x\n", read_c0_cause()); + len += sprintf(&page[len], "count: %#10.8x\n", read_c0_count()); + len += sprintf(&page[len], "count_2: %#10.8x\n", read_c0_count2()); + len += sprintf(&page[len], "count_3: %#10.8x\n", read_c0_count3()); + len += sprintf(&page[len], "compare: %#10.8x\n", read_c0_compare()); + len += sprintf(&page[len], "compare_2: %#10.8x\n", read_c0_compare2()); + len += sprintf(&page[len], "compare_3: %#10.8x\n", read_c0_compare3()); + } + + return len; +} + +static struct proc_dir_entry* pnx8550_dir = NULL; +static struct proc_dir_entry* pnx8550_timers = NULL; +static struct proc_dir_entry* pnx8550_registers = NULL; + +static int pnx8550_proc_init( void ) +{ + + // Create /proc/pnx8550 + pnx8550_dir = proc_mkdir("pnx8550", NULL); + if (!pnx8550_dir) { + printk(KERN_ERR "Can't create pnx8550 proc dir\n"); + return -1; + } + + // Create /proc/pnx8550/timers + pnx8550_timers = create_proc_read_entry( + "timers", + 0, + pnx8550_dir, + pnx8550_timers_read, + NULL); + + if (!pnx8550_timers) + printk(KERN_ERR "Can't create pnx8550 timers proc file\n"); + + // Create /proc/pnx8550/registers + pnx8550_registers = create_proc_read_entry( + "registers", + 0, + pnx8550_dir, + pnx8550_registers_read, + NULL); + + if (!pnx8550_registers) + printk(KERN_ERR "Can't create pnx8550 registers proc file\n"); + + return 0; +} + +__initcall(pnx8550_proc_init); diff --git a/arch/mips/nxp/pnx8550/common/prom.c b/arch/mips/nxp/pnx8550/common/prom.c new file mode 100644 index 00000000000..2f567452e7a --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/prom.c @@ -0,0 +1,129 @@ +/* + * + * Per Hallsmark, per.hallsmark@mvista.com + * + * Based on jmr3927/common/prom.c + * + * 2004 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include + +#include +#include + +/* #define DEBUG_CMDLINE */ + +extern int prom_argc; +extern char **prom_argv, **prom_envp; + +typedef struct +{ + char *name; +/* char *val; */ +}t_env_var; + + +char * prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + int i; + + arcs_cmdline[0] = '\0'; + for (i = 0; i < prom_argc; i++) { + strcat(arcs_cmdline, prom_argv[i]); + strcat(arcs_cmdline, " "); + } +} + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * Environment variables are stored in the form of "memsize=64". + */ + + t_env_var *env = (t_env_var *)prom_envp; + int i; + + i = strlen(envname); + + while(env->name) { + if(strncmp(envname, env->name, i) == 0) { + return(env->name + strlen(envname) + 1); + } + env++; + } + return(NULL); +} + +inline unsigned char str2hexnum(unsigned char c) +{ + if(c >= '0' && c <= '9') + return c - '0'; + if(c >= 'a' && c <= 'f') + return c - 'a' + 10; + if(c >= 'A' && c <= 'F') + return c - 'A' + 10; + return 0; /* foo */ +} + +inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for(i = 0; i < 6; i++) { + unsigned char num; + + if((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= (str2hexnum(*str++)); + ea[i] = num; + } +} + +int get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + printk("ethaddr not set in boot prom\n"); + return -1; + } + str2eaddr(ethernet_addr, ethaddr_str); + return 0; +} + +void __init prom_free_prom_memory(void) +{ +} + +extern int pnx8550_console_port; + +/* used by early printk */ +void prom_putchar(char c) +{ + if (pnx8550_console_port != -1) { + /* Wait until FIFO not full */ + while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16) + ; + /* Send one char */ + ip3106_fifo(UART_BASE, pnx8550_console_port) = c; + } +} + +EXPORT_SYMBOL(prom_getcmdline); +EXPORT_SYMBOL(get_ethernet_addr); +EXPORT_SYMBOL(str2eaddr); diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c new file mode 100644 index 00000000000..7b2cbc5b2c7 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/reset.c @@ -0,0 +1,49 @@ +/*. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Reset the PNX8550 board. + * + */ +#include +#include +#include + +void pnx8550_machine_restart(char *command) +{ + char head[] = "************* Machine restart *************"; + char foot[] = "*******************************************"; + + printk("\n\n"); + printk("%s\n", head); + if (command != NULL) + printk("* %s\n", command); + printk("%s\n", foot); + + PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST; +} + +void pnx8550_machine_halt(void) +{ + printk("*** Machine halt. (Not implemented) ***\n"); +} + +void pnx8550_machine_power_off(void) +{ + printk("*** Machine power off. (Not implemented) ***\n"); +} diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c new file mode 100644 index 00000000000..92d764c9770 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -0,0 +1,157 @@ +/* + * + * 2.6 port, Embedded Alley Solutions, Inc + * + * Based on Per Hallsmark, per.hallsmark@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +extern void __init board_setup(void); +extern void pnx8550_machine_restart(char *); +extern void pnx8550_machine_halt(void); +extern void pnx8550_machine_power_off(void); +extern struct resource ioport_resource; +extern struct resource iomem_resource; +extern void rs_kgdb_hook(int tty_no); +extern char *prom_getcmdline(void); + +struct resource standard_io_resources[] = { + { + .start = 0x00, + .end = 0x1f, + .name = "dma1", + .flags = IORESOURCE_BUSY + }, { + .start = 0x40, + .end = 0x5f, + .name = "timer", + .flags = IORESOURCE_BUSY + }, { + .start = 0x80, + .end = 0x8f, + .name = "dma page reg", + .flags = IORESOURCE_BUSY + }, { + .start = 0xc0, + .end = 0xdf, + .name = "dma2", + .flags = IORESOURCE_BUSY + }, +}; + +#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) + +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ +unsigned long get_system_mem_size(void) +{ + /* Read IP2031_RANK0_ADDR_LO */ + unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); + /* Read IP2031_RANK1_ADDR_HI */ + unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); + + return dram_r1_hi - dram_r0_lo + 1; +} + +int pnx8550_console_port = -1; + +void __init plat_mem_setup(void) +{ + int i; + char* argptr; + + board_setup(); /* board specific setup */ + + _machine_restart = pnx8550_machine_restart; + _machine_halt = pnx8550_machine_halt; + pm_power_off = pnx8550_machine_power_off; + + /* Clear the Global 2 Register, PCI Inta Output Enable Registers + Bit 1:Enable DAC Powerdown + -> 0:DACs are enabled and are working normally + 1:DACs are powerdown + Bit 0:Enable of PCI inta output + -> 0 = Disable PCI inta output + 1 = Enable PCI inta output + */ + PNX8550_GLB2_ENAB_INTA_O = 0; + + /* IO/MEM resources. */ + set_io_port_base(KSEG1); + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + /* Request I/O space for devices on this board */ + for (i = 0; i < STANDARD_IO_RESOURCES; i++) + request_resource(&ioport_resource, standard_io_resources + i); + + /* Place the Mode Control bit for GPIO pin 16 in primary function */ + /* Pin 16 is used by UART1, UA1_TX */ + outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | + (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), + PNX8550_GPIO_MC1); + + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { + argptr += strlen("console=ttyS"); + pnx8550_console_port = *argptr == '0' ? 0 : 1; + + /* We must initialize the UART (console) before early printk */ + /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ + ip3106_lcr(UART_BASE, pnx8550_console_port) = + PNX8XXX_UART_LCR_8BIT; + ip3106_baud(UART_BASE, pnx8550_console_port) = 5; + } + +#ifdef CONFIG_KGDB + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { + int line; + argptr += strlen("kgdb=ttyS"); + line = *argptr == '0' ? 0 : 1; + rs_kgdb_hook(line); + pr_info("KGDB: Using ttyS%i for session, " + "please connect your debugger\n", line ? 1 : 0); + } +#endif + return; +} diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c new file mode 100644 index 00000000000..62f495b57f9 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -0,0 +1,150 @@ +/* + * Copyright 2001, 2002, 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Common time service routines for MIPS machines. See + * Documents/MIPS/README.txt. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +static unsigned long cpj; + +static cycle_t hpt_read(void) +{ + return read_c0_count2(); +} + +static struct clocksource pnx_clocksource = { + .name = "pnx8xxx", + .rating = 200, + .read = hpt_read, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + /* clear MATCH, signal the event */ + c->event_handler(c); + + return IRQ_HANDLED; +} + +static struct irqaction pnx8xxx_timer_irq = { + .handler = pnx8xxx_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_PERCPU, + .name = "pnx8xxx_timer", +}; + +static irqreturn_t monotonic_interrupt(int irq, void *dev_id) +{ + /* Timer 2 clear interrupt */ + write_c0_compare2(-1); + return IRQ_HANDLED; +} + +static struct irqaction monotonic_irqaction = { + .handler = monotonic_interrupt, + .flags = IRQF_DISABLED, + .name = "Monotonic timer", +}; + +static int pnx8xxx_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + write_c0_compare(delta); + return 0; +} + +static struct clock_event_device pnx8xxx_clockevent = { + .name = "pnx8xxx_clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = pnx8xxx_set_next_event, +}; + +static inline void timer_ack(void) +{ + write_c0_compare(cpj); +} + +__init void plat_time_init(void) +{ + unsigned int configPR; + unsigned int n; + unsigned int m; + unsigned int p; + unsigned int pow2p; + + clockevents_register_device(&pnx8xxx_clockevent); + clocksource_register(&pnx_clocksource); + + /* Timer 1 start */ + configPR = read_c0_config7(); + configPR &= ~0x00000008; + write_c0_config7(configPR); + + /* Timer 2 start */ + configPR = read_c0_config7(); + configPR &= ~0x00000010; + write_c0_config7(configPR); + + /* Timer 3 stop */ + configPR = read_c0_config7(); + configPR |= 0x00000020; + write_c0_config7(configPR); + + + /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */ + /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */ + + n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16; + m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8; + p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2; + pow2p = (1 << p); + + db_assert(m != 0 && pow2p != 0); + + /* + * Compute the frequency as in the PNX8550 User Manual 1.0, p.186 + * (a.k.a. 8-10). Divide by HZ for a timer offset that results in + * HZ timer interrupts per second. + */ + mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); + cpj = (mips_hpt_frequency + HZ / 2) / HZ; + write_c0_count(0); + timer_ack(); + + /* Setup Timer 2 */ + write_c0_count2(0); + write_c0_compare2(0xffffffff); + + setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); + setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); +} diff --git a/arch/mips/nxp/pnx8550/jbs/Makefile b/arch/mips/nxp/pnx8550/jbs/Makefile new file mode 100644 index 00000000000..ad6a8ca7d8c --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/Makefile @@ -0,0 +1,4 @@ + +# Makefile for the NXP JBS Board. + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c new file mode 100644 index 00000000000..f92826e0096 --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c @@ -0,0 +1,65 @@ +/* + * JBS Specific board startup routines. + * + * Copyright 2005, Embedded Alley Solutions, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +/* CP0 hazard avoidance. */ +#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +void __init board_setup(void) +{ + unsigned long config0, configpr; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7<<25) | (7<<28)); + config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | + (CONF_CM_DEFAULT<<28)); + write_c0_config(config0); + BARRIER; + + configpr = read_c0_config7(); + configpr |= (1<<19); /* enable tlb */ + write_c0_config7(configpr); + BARRIER; +} diff --git a/arch/mips/nxp/pnx8550/jbs/init.c b/arch/mips/nxp/pnx8550/jbs/init.c new file mode 100644 index 00000000000..d59b4a4e5e8 --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/init.c @@ -0,0 +1,53 @@ +/* + * + * Copyright 2005 Embedded Alley Solutions, Inc + * source@embeddedalley.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP PNX8550/JBS"; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + //memsize = 0x02800000; /* Trimedia uses memory above */ + memsize = 0x08000000; /* Trimedia uses memory above */ + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/nxp/pnx8550/jbs/irqmap.c b/arch/mips/nxp/pnx8550/jbs/irqmap.c new file mode 100644 index 00000000000..7fc89842002 --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/irqmap.c @@ -0,0 +1,35 @@ +/* + * NXP JBS board irqmap. + * + * Copyright 2005 Embedded Alley Solutions, Inc + * source@embeddealley.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +char pnx8550_irq_tab[][5] __initdata = { + [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, +}; diff --git a/arch/mips/nxp/pnx8550/stb810/Makefile b/arch/mips/nxp/pnx8550/stb810/Makefile new file mode 100644 index 00000000000..ab91d72c566 --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/Makefile @@ -0,0 +1,4 @@ + +# Makefile for the NXP STB810 Board. + +lib-y := prom_init.o board_setup.o irqmap.o diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c new file mode 100644 index 00000000000..1282c27cfcb --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c @@ -0,0 +1,49 @@ +/* + * STB810 specific board startup routines. + * + * Based on the arch/mips/nxp/pnx8550/jbs/board_setup.c + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +void __init board_setup(void) +{ + unsigned long config0, configpr; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7<<25) | (7<<28)); + config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | + (CONF_CM_DEFAULT<<28)); + write_c0_config(config0); + + configpr = read_c0_config7(); + configpr |= (1<<19); /* enable tlb */ + write_c0_config7(configpr); +} diff --git a/arch/mips/nxp/pnx8550/stb810/irqmap.c b/arch/mips/nxp/pnx8550/stb810/irqmap.c new file mode 100644 index 00000000000..8c034963ddc --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/irqmap.c @@ -0,0 +1,22 @@ +/* + * NXP STB810 board irqmap. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +char pnx8550_irq_tab[][5] __initdata = { + [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, +}; diff --git a/arch/mips/nxp/pnx8550/stb810/prom_init.c b/arch/mips/nxp/pnx8550/stb810/prom_init.c new file mode 100644 index 00000000000..ca7f4ada064 --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/prom_init.c @@ -0,0 +1,46 @@ +/* + * STB810 specific prom routines + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP PNX8950/STB810"; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + prom_argc = (int) fw_arg0; + prom_argv = (char **) fw_arg1; + prom_envp = (char **) fw_arg2; + + prom_init_cmdline(); + + memsize = 0x08000000; /* Trimedia uses memory above */ + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile deleted file mode 100644 index 31cc1a5cec3..00000000000 --- a/arch/mips/philips/pnx8550/common/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Per Hallsmark, per.hallsmark@mvista.com -# -# ######################################################################## -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# ####################################################################### -# -# Makefile for the PNX8550 specific kernel interface routines -# under Linux. -# - -obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/philips/pnx8550/common/gdb_hook.c b/arch/mips/philips/pnx8550/common/gdb_hook.c deleted file mode 100644 index ad4624f6d9b..00000000000 --- a/arch/mips/philips/pnx8550/common/gdb_hook.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * This is the interface to the remote debugger stub. - * - */ -#include -#include -#include -#include -#include - -#include -#include - -#include - -static struct serial_state rs_table[IP3106_NR_PORTS] = { -}; -static struct async_struct kdb_port_info = {0}; - -void rs_kgdb_hook(int tty_no) -{ - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = tty_no; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - - /* - * Now, initialize the UART - */ - ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; - ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud -} - -int putDebugChar(char c) -{ - /* Wait until FIFO not full */ - while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, kdb_port_info.port) = c; - - return 1; -} - -char getDebugChar(void) -{ - char ch; - - /* Wait until there is a char in the FIFO */ - while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RXFIFO) >> 8)) - ; - /* Read one char */ - ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RBRTHR; - /* Advance the RX FIFO read pointer */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; - return (ch); -} - -void rs_disable_debug_interrupts(void) -{ - ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ -} - -void rs_enable_debug_interrupts(void) -{ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ -} diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c deleted file mode 100644 index aad03429a5e..00000000000 --- a/arch/mips/philips/pnx8550/common/int.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - * Ported to 2.6. - * - * Per Hallsmark, per.hallsmark@mvista.com - * Copyright (C) 2000, 2001 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * - * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* default prio for interrupts */ -/* first one is a no-no so therefore always prio 0 (disabled) */ -static char gic_prio[PNX8550_INT_GIC_TOTINT] = { - 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49 - 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69 - 1 // 70 -}; - -static void hw0_irqdispatch(int irq) -{ - /* find out which interrupt */ - irq = PNX8550_GIC_VECTOR_0 >> 3; - - if (irq == 0) { - printk("hw0_irqdispatch: irq 0, spurious interrupt?\n"); - return; - } - do_IRQ(PNX8550_INT_GIC_MIN + irq); -} - - -static void timer_irqdispatch(int irq) -{ - irq = (0x01c0 & read_c0_config7()) >> 6; - - if (unlikely(irq == 0)) { - printk("timer_irqdispatch: irq 0, spurious interrupt?\n"); - return; - } - - if (irq & 0x1) - do_IRQ(PNX8550_INT_TIMER1); - if (irq & 0x2) - do_IRQ(PNX8550_INT_TIMER2); - if (irq & 0x4) - do_IRQ(PNX8550_INT_TIMER3); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP2) - hw0_irqdispatch(2); - else if (pending & STATUSF_IP7) { - if (read_c0_config7() & 0x01c0) - timer_irqdispatch(7); - } else - spurious_interrupt(); -} - -static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) -{ - unsigned long status = read_c0_status(); - - status &= ~((clr_mask & 0xFF) << 8); - status |= (set_mask & 0xFF) << 8; - - write_c0_status(status); -} - -static inline void mask_gic_int(unsigned int irq_nr) -{ - /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */ - PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */ -} - -static inline void unmask_gic_int(unsigned int irq_nr) -{ - /* set prio mask to lower four bits and enable interrupt */ - PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr]; -} - -static inline void mask_irq(unsigned int irq_nr) -{ - if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { - modify_cp0_intmask(1 << irq_nr, 0); - } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_GIC_MAX)) { - mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); - } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_TIMER_MAX)) { - modify_cp0_intmask(1 << 7, 0); - } else { - printk("mask_irq: irq %d doesn't exist!\n", irq_nr); - } -} - -static inline void unmask_irq(unsigned int irq_nr) -{ - if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { - modify_cp0_intmask(0, 1 << irq_nr); - } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_GIC_MAX)) { - unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); - } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_TIMER_MAX)) { - modify_cp0_intmask(0, 1 << 7); - } else { - printk("mask_irq: irq %d doesn't exist!\n", irq_nr); - } -} - -int pnx8550_set_gic_priority(int irq, int priority) -{ - int gic_irq = irq-PNX8550_INT_GIC_MIN; - int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf; - - gic_prio[gic_irq] = priority; - PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]); - - return prev_priority; -} - -static struct irq_chip level_irq_type = { - .name = "PNX Level IRQ", - .ack = mask_irq, - .mask = mask_irq, - .mask_ack = mask_irq, - .unmask = unmask_irq, -}; - -static struct irqaction gic_action = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "GIC", -}; - -static struct irqaction timer_action = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "Timer", -}; - -void __init arch_init_irq(void) -{ - int i; - int configPR; - - for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { - set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); - mask_irq(i); /* mask the irq just in case */ - } - - /* init of GIC/IPC interrupts */ - /* should be done before cp0 since cp0 init enables the GIC int */ - for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) { - int gic_int_line = i - PNX8550_INT_GIC_MIN; - if (gic_int_line == 0 ) - continue; // don't fiddle with int 0 - /* - * enable change of TARGET, ENABLE and ACTIVE_LOW bits - * set TARGET 0 to route through hw0 interrupt - * set ACTIVE_LOW 0 active high (correct?) - * - * We really should setup an interrupt description table - * to do this nicely. - * Note, PCI INTA is active low on the bus, but inverted - * in the GIC, so to us it's active high. - */ - PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000; - - /* mask/priority is still 0 so we will not get any - * interrupts until it is unmasked */ - - set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); - } - - /* Priority level 0 */ - PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0; - - /* Set int vector table address */ - PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0; - - set_irq_chip_and_handler(MIPS_CPU_GIC_IRQ, &level_irq_type, - handle_level_irq); - setup_irq(MIPS_CPU_GIC_IRQ, &gic_action); - - /* init of Timer interrupts */ - for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) - set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); - - /* Stop Timer 1-3 */ - configPR = read_c0_config7(); - configPR |= 0x00000038; - write_c0_config7(configPR); - - set_irq_chip_and_handler(MIPS_CPU_TIMER_IRQ, &level_irq_type, - handle_level_irq); - setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action); -} - -EXPORT_SYMBOL(pnx8550_set_gic_priority); diff --git a/arch/mips/philips/pnx8550/common/pci.c b/arch/mips/philips/pnx8550/common/pci.c deleted file mode 100644 index eee4f3dfc41..00000000000 --- a/arch/mips/philips/pnx8550/common/pci.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * - * Author: source@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include - -#include -#include -#include - -static struct resource pci_io_resource = { - .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ - .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, - .name = "pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .start = PNX8550_PCIMEM, - .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, - .name = "pci memory space", - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops pnx8550_pci_ops; - -static struct pci_controller pnx8550_controller = { - .pci_ops = &pnx8550_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -static inline unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -static int __init pnx8550_pci_setup(void) -{ - int pci_mem_code; - int mem_size = get_system_mem_size() >> 20; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* Calc the PCI mem size code */ - if (mem_size >= 128) - pci_mem_code = SIZE_128M; - else if (mem_size >= 64) - pci_mem_code = SIZE_64M; - else if (mem_size >= 32) - pci_mem_code = SIZE_32M; - else - pci_mem_code = SIZE_16M; - - /* Set PCI_XIO registers */ - outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); - outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); - outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); - outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); - - /* Send memory transaction via PCI_BASE2 */ - outl(0x00000001, PCI_BASE | PCI_IO); - - /* Unlock the setup register */ - outl(0xca, PCI_BASE | PCI_UNLOCKREG); - - /* - * BAR0 of PNX8550 (pci base 10) must be zero in order for ide - * to work, and in order for bus_to_baddr to work without any - * hacks. - */ - outl(0x00000000, PCI_BASE | PCI_BASE10); - - /* - *These two bars are set by default or the boot code. - * However, it's safer to set them here so we're not boot - * code dependent. - */ - outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ - outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ - - outl(PCI_EN_TA | - PCI_EN_PCI2MMI | - PCI_EN_XIO | - PCI_SETUP_BASE18_SIZE(SIZE_32M) | - PCI_SETUP_BASE18_EN | - PCI_SETUP_BASE14_EN | - PCI_SETUP_BASE10_PREF | - PCI_SETUP_BASE10_SIZE(pci_mem_code) | - PCI_SETUP_CFGMANAGE_EN | - PCI_SETUP_PCIARB_EN, - PCI_BASE | - PCI_SETUP); /* PCI_SETUP */ - outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ - - register_pci_controller(&pnx8550_controller); - - return 0; -} - -arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c deleted file mode 100644 index c839436bd01..00000000000 --- a/arch/mips/philips/pnx8550/common/platform.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Platform device support for Philips PNX8550 SoCs - * - * Copyright 2005, Embedded Alley Solutions, Inc - * - * Based on arch/mips/au1000/common/platform.c - * Platform device support for Au1x00 SoCs. - * - * Copyright 2004, Matt Porter - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static struct resource pnx8550_usb_ohci_resources[] = { - [0] = { - .start = PNX8550_USB_OHCI_OP_BASE, - .end = PNX8550_USB_OHCI_OP_BASE + - PNX8550_USB_OHCI_OP_LEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8550_INT_USB, - .end = PNX8550_INT_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx8550_uart_resources[] = { - [0] = { - .start = PNX8550_UART_PORT0, - .end = PNX8550_UART_PORT0 + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8550_UART_INT(0), - .end = PNX8550_UART_INT(0), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = PNX8550_UART_PORT1, - .end = PNX8550_UART_PORT1 + 0xfff, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PNX8550_UART_INT(1), - .end = PNX8550_UART_INT(1), - .flags = IORESOURCE_IRQ, - }, -}; - -struct pnx8xxx_port pnx8xxx_ports[] = { - [0] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX8550_UART_PORT0, - .mapbase = PNX8550_UART_PORT0, - .irq = PNX8550_UART_INT(0), - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX8550_UART_PORT1, - .mapbase = PNX8550_UART_PORT1, - .irq = PNX8550_UART_INT(1), - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static u64 uart_dmamask = ~(u32)0; - -static struct platform_device pnx8550_usb_ohci_device = { - .name = "pnx8550-ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), - .resource = pnx8550_usb_ohci_resources, -}; - -static struct platform_device pnx8550_uart_device = { - .name = "pnx8xxx-uart", - .id = -1, - .dev = { - .dma_mask = &uart_dmamask, - .coherent_dma_mask = 0xffffffff, - .platform_data = pnx8xxx_ports, - }, - .num_resources = ARRAY_SIZE(pnx8550_uart_resources), - .resource = pnx8550_uart_resources, -}; - -static struct platform_device *pnx8550_platform_devices[] __initdata = { - &pnx8550_usb_ohci_device, - &pnx8550_uart_device, -}; - -static int __init pnx8550_platform_init(void) -{ - return platform_add_devices(pnx8550_platform_devices, - ARRAY_SIZE(pnx8550_platform_devices)); -} - -arch_initcall(pnx8550_platform_init); diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c deleted file mode 100644 index 18b125e3b65..00000000000 --- a/arch/mips/philips/pnx8550/common/proc.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - - -static int pnx8550_timers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) -{ - int len = 0; - int configPR = read_c0_config7(); - - if (offset==0) { - len += sprintf(&page[len], "Timer: count, compare, tc, status\n"); - len += sprintf(&page[len], " 1: %11i, %8i, %1i, %s\n", - read_c0_count(), read_c0_compare(), - (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on"); - len += sprintf(&page[len], " 2: %11i, %8i, %1i, %s\n", - read_c0_count2(), read_c0_compare2(), - (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on"); - len += sprintf(&page[len], " 3: %11i, %8i, %1i, %s\n", - read_c0_count3(), read_c0_compare3(), - (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on"); - } - - return len; -} - -static int pnx8550_registers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) -{ - int len = 0; - - if (offset==0) { - len += sprintf(&page[len], "config1: %#10.8x\n", read_c0_config1()); - len += sprintf(&page[len], "config2: %#10.8x\n", read_c0_config2()); - len += sprintf(&page[len], "config3: %#10.8x\n", read_c0_config3()); - len += sprintf(&page[len], "configPR: %#10.8x\n", read_c0_config7()); - len += sprintf(&page[len], "status: %#10.8x\n", read_c0_status()); - len += sprintf(&page[len], "cause: %#10.8x\n", read_c0_cause()); - len += sprintf(&page[len], "count: %#10.8x\n", read_c0_count()); - len += sprintf(&page[len], "count_2: %#10.8x\n", read_c0_count2()); - len += sprintf(&page[len], "count_3: %#10.8x\n", read_c0_count3()); - len += sprintf(&page[len], "compare: %#10.8x\n", read_c0_compare()); - len += sprintf(&page[len], "compare_2: %#10.8x\n", read_c0_compare2()); - len += sprintf(&page[len], "compare_3: %#10.8x\n", read_c0_compare3()); - } - - return len; -} - -static struct proc_dir_entry* pnx8550_dir = NULL; -static struct proc_dir_entry* pnx8550_timers = NULL; -static struct proc_dir_entry* pnx8550_registers = NULL; - -static int pnx8550_proc_init( void ) -{ - - // Create /proc/pnx8550 - pnx8550_dir = proc_mkdir("pnx8550", NULL); - if (!pnx8550_dir) { - printk(KERN_ERR "Can't create pnx8550 proc dir\n"); - return -1; - } - - // Create /proc/pnx8550/timers - pnx8550_timers = create_proc_read_entry( - "timers", - 0, - pnx8550_dir, - pnx8550_timers_read, - NULL); - - if (!pnx8550_timers) - printk(KERN_ERR "Can't create pnx8550 timers proc file\n"); - - // Create /proc/pnx8550/registers - pnx8550_registers = create_proc_read_entry( - "registers", - 0, - pnx8550_dir, - pnx8550_registers_read, - NULL); - - if (!pnx8550_registers) - printk(KERN_ERR "Can't create pnx8550 registers proc file\n"); - - return 0; -} - -__initcall(pnx8550_proc_init); diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c deleted file mode 100644 index 2f567452e7a..00000000000 --- a/arch/mips/philips/pnx8550/common/prom.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * - * Per Hallsmark, per.hallsmark@mvista.com - * - * Based on jmr3927/common/prom.c - * - * 2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include - -#include -#include - -/* #define DEBUG_CMDLINE */ - -extern int prom_argc; -extern char **prom_argv, **prom_envp; - -typedef struct -{ - char *name; -/* char *val; */ -}t_env_var; - - -char * prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - int i; - - arcs_cmdline[0] = '\0'; - for (i = 0; i < prom_argc; i++) { - strcat(arcs_cmdline, prom_argv[i]); - strcat(arcs_cmdline, " "); - } -} - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * Environment variables are stored in the form of "memsize=64". - */ - - t_env_var *env = (t_env_var *)prom_envp; - int i; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { - return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); -} - -inline unsigned char str2hexnum(unsigned char c) -{ - if(c >= '0' && c <= '9') - return c - '0'; - if(c >= 'a' && c <= 'f') - return c - 'a' + 10; - if(c >= 'A' && c <= 'F') - return c - 'A' + 10; - return 0; /* foo */ -} - -inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for(i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - return 0; -} - -void __init prom_free_prom_memory(void) -{ -} - -extern int pnx8550_console_port; - -/* used by early printk */ -void prom_putchar(char c) -{ - if (pnx8550_console_port != -1) { - /* Wait until FIFO not full */ - while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, pnx8550_console_port) = c; - } -} - -EXPORT_SYMBOL(prom_getcmdline); -EXPORT_SYMBOL(get_ethernet_addr); -EXPORT_SYMBOL(str2eaddr); diff --git a/arch/mips/philips/pnx8550/common/reset.c b/arch/mips/philips/pnx8550/common/reset.c deleted file mode 100644 index 7b2cbc5b2c7..00000000000 --- a/arch/mips/philips/pnx8550/common/reset.c +++ /dev/null @@ -1,49 +0,0 @@ -/*. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the PNX8550 board. - * - */ -#include -#include -#include - -void pnx8550_machine_restart(char *command) -{ - char head[] = "************* Machine restart *************"; - char foot[] = "*******************************************"; - - printk("\n\n"); - printk("%s\n", head); - if (command != NULL) - printk("* %s\n", command); - printk("%s\n", foot); - - PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST; -} - -void pnx8550_machine_halt(void) -{ - printk("*** Machine halt. (Not implemented) ***\n"); -} - -void pnx8550_machine_power_off(void) -{ - printk("*** Machine power off. (Not implemented) ***\n"); -} diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c deleted file mode 100644 index 92d764c9770..00000000000 --- a/arch/mips/philips/pnx8550/common/setup.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * - * 2.6 port, Embedded Alley Solutions, Inc - * - * Based on Per Hallsmark, per.hallsmark@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -extern void __init board_setup(void); -extern void pnx8550_machine_restart(char *); -extern void pnx8550_machine_halt(void); -extern void pnx8550_machine_power_off(void); -extern struct resource ioport_resource; -extern struct resource iomem_resource; -extern void rs_kgdb_hook(int tty_no); -extern char *prom_getcmdline(void); - -struct resource standard_io_resources[] = { - { - .start = 0x00, - .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { - .start = 0x80, - .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { - .start = 0xc0, - .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY - }, -}; - -#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ -unsigned long get_system_mem_size(void) -{ - /* Read IP2031_RANK0_ADDR_LO */ - unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); - /* Read IP2031_RANK1_ADDR_HI */ - unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); - - return dram_r1_hi - dram_r0_lo + 1; -} - -int pnx8550_console_port = -1; - -void __init plat_mem_setup(void) -{ - int i; - char* argptr; - - board_setup(); /* board specific setup */ - - _machine_restart = pnx8550_machine_restart; - _machine_halt = pnx8550_machine_halt; - pm_power_off = pnx8550_machine_power_off; - - /* Clear the Global 2 Register, PCI Inta Output Enable Registers - Bit 1:Enable DAC Powerdown - -> 0:DACs are enabled and are working normally - 1:DACs are powerdown - Bit 0:Enable of PCI inta output - -> 0 = Disable PCI inta output - 1 = Enable PCI inta output - */ - PNX8550_GLB2_ENAB_INTA_O = 0; - - /* IO/MEM resources. */ - set_io_port_base(KSEG1); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - /* Request I/O space for devices on this board */ - for (i = 0; i < STANDARD_IO_RESOURCES; i++) - request_resource(&ioport_resource, standard_io_resources + i); - - /* Place the Mode Control bit for GPIO pin 16 in primary function */ - /* Pin 16 is used by UART1, UA1_TX */ - outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | - (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), - PNX8550_GPIO_MC1); - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { - argptr += strlen("console=ttyS"); - pnx8550_console_port = *argptr == '0' ? 0 : 1; - - /* We must initialize the UART (console) before early printk */ - /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ - ip3106_lcr(UART_BASE, pnx8550_console_port) = - PNX8XXX_UART_LCR_8BIT; - ip3106_baud(UART_BASE, pnx8550_console_port) = 5; - } - -#ifdef CONFIG_KGDB - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - int line; - argptr += strlen("kgdb=ttyS"); - line = *argptr == '0' ? 0 : 1; - rs_kgdb_hook(line); - pr_info("KGDB: Using ttyS%i for session, " - "please connect your debugger\n", line ? 1 : 0); - } -#endif - return; -} diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c deleted file mode 100644 index 62f495b57f9..00000000000 --- a/arch/mips/philips/pnx8550/common/time.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright 2001, 2002, 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Common time service routines for MIPS machines. See - * Documents/MIPS/README.txt. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -static unsigned long cpj; - -static cycle_t hpt_read(void) -{ - return read_c0_count2(); -} - -static struct clocksource pnx_clocksource = { - .name = "pnx8xxx", - .rating = 200, - .read = hpt_read, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* clear MATCH, signal the event */ - c->event_handler(c); - - return IRQ_HANDLED; -} - -static struct irqaction pnx8xxx_timer_irq = { - .handler = pnx8xxx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, - .name = "pnx8xxx_timer", -}; - -static irqreturn_t monotonic_interrupt(int irq, void *dev_id) -{ - /* Timer 2 clear interrupt */ - write_c0_compare2(-1); - return IRQ_HANDLED; -} - -static struct irqaction monotonic_irqaction = { - .handler = monotonic_interrupt, - .flags = IRQF_DISABLED, - .name = "Monotonic timer", -}; - -static int pnx8xxx_set_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - write_c0_compare(delta); - return 0; -} - -static struct clock_event_device pnx8xxx_clockevent = { - .name = "pnx8xxx_clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = pnx8xxx_set_next_event, -}; - -static inline void timer_ack(void) -{ - write_c0_compare(cpj); -} - -__init void plat_time_init(void) -{ - unsigned int configPR; - unsigned int n; - unsigned int m; - unsigned int p; - unsigned int pow2p; - - clockevents_register_device(&pnx8xxx_clockevent); - clocksource_register(&pnx_clocksource); - - /* Timer 1 start */ - configPR = read_c0_config7(); - configPR &= ~0x00000008; - write_c0_config7(configPR); - - /* Timer 2 start */ - configPR = read_c0_config7(); - configPR &= ~0x00000010; - write_c0_config7(configPR); - - /* Timer 3 stop */ - configPR = read_c0_config7(); - configPR |= 0x00000020; - write_c0_config7(configPR); - - - /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */ - /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */ - - n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16; - m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8; - p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2; - pow2p = (1 << p); - - db_assert(m != 0 && pow2p != 0); - - /* - * Compute the frequency as in the PNX8550 User Manual 1.0, p.186 - * (a.k.a. 8-10). Divide by HZ for a timer offset that results in - * HZ timer interrupts per second. - */ - mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); - cpj = (mips_hpt_frequency + HZ / 2) / HZ; - write_c0_count(0); - timer_ack(); - - /* Setup Timer 2 */ - write_c0_count2(0); - write_c0_compare2(0xffffffff); - - setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); - setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); -} diff --git a/arch/mips/philips/pnx8550/jbs/Makefile b/arch/mips/philips/pnx8550/jbs/Makefile deleted file mode 100644 index e8228dbca8f..00000000000 --- a/arch/mips/philips/pnx8550/jbs/Makefile +++ /dev/null @@ -1,4 +0,0 @@ - -# Makefile for the Philips JBS Board. - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c deleted file mode 100644 index e550a3e12f6..00000000000 --- a/arch/mips/philips/pnx8550/jbs/board_setup.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * JBS Specific board startup routines. - * - * Copyright 2005, Embedded Alley Solutions, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -/* CP0 hazard avoidance. */ -#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t") - -void __init board_setup(void) -{ - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (_page_cachable_default >> _CACHE_SHIFT) | - (CONF_CM_DEFAULT << 25) | (CONF_CM_DEFAULT << 28); - write_c0_config(config0); - BARRIER; - - configpr = read_c0_config7(); - configpr |= (1<<19); /* enable tlb */ - write_c0_config7(configpr); - BARRIER; -} diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c deleted file mode 100644 index 90b4d35f3ec..00000000000 --- a/arch/mips/philips/pnx8550/jbs/init.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddedalley.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "Philips PNX8550/JBS"; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - //memsize = 0x02800000; /* Trimedia uses memory above */ - memsize = 0x08000000; /* Trimedia uses memory above */ - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/philips/pnx8550/jbs/irqmap.c b/arch/mips/philips/pnx8550/jbs/irqmap.c deleted file mode 100644 index 98c3429e6e5..00000000000 --- a/arch/mips/philips/pnx8550/jbs/irqmap.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Philips JBS board irqmap. - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddealley.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -char pnx8550_irq_tab[][5] __initdata = { - [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, -}; - diff --git a/arch/mips/philips/pnx8550/stb810/Makefile b/arch/mips/philips/pnx8550/stb810/Makefile deleted file mode 100644 index f14b592af39..00000000000 --- a/arch/mips/philips/pnx8550/stb810/Makefile +++ /dev/null @@ -1,4 +0,0 @@ - -# Makefile for the Philips STB810 Board. - -lib-y := prom_init.o board_setup.o irqmap.o diff --git a/arch/mips/philips/pnx8550/stb810/board_setup.c b/arch/mips/philips/pnx8550/stb810/board_setup.c deleted file mode 100644 index d461d7a6236..00000000000 --- a/arch/mips/philips/pnx8550/stb810/board_setup.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * STB810 specific board startup routines. - * - * Based on the arch/mips/philips/pnx8550/jbs/board_setup.c - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -void __init board_setup(void) -{ - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (_page_cachable_default >> _CACHE_SHIFT) | - (CONF_CM_DEFAULT << 25) | (CONF_CM_DEFAULT << 28); - write_c0_config(config0); - - configpr = read_c0_config7(); - configpr |= (1<<19); /* enable tlb */ - write_c0_config7(configpr); -} diff --git a/arch/mips/philips/pnx8550/stb810/irqmap.c b/arch/mips/philips/pnx8550/stb810/irqmap.c deleted file mode 100644 index 5ee11e19975..00000000000 --- a/arch/mips/philips/pnx8550/stb810/irqmap.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Philips STB810 board irqmap. - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include - -char pnx8550_irq_tab[][5] __initdata = { - [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, -}; - diff --git a/arch/mips/philips/pnx8550/stb810/prom_init.c b/arch/mips/philips/pnx8550/stb810/prom_init.c deleted file mode 100644 index 832dd60b0a7..00000000000 --- a/arch/mips/philips/pnx8550/stb810/prom_init.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * STB810 specific prom routines - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "Philips PNX8550/STB810"; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - - prom_init_cmdline(); - - memsize = 0x08000000; /* Trimedia uses memory above */ - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 6d04ea91225..1c35cac6f35 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -29,7 +29,7 @@ #define PRID_COMP_ALCHEMY 0x030000 #define PRID_COMP_SIBYTE 0x040000 #define PRID_COMP_SANDCRAFT 0x050000 -#define PRID_COMP_PHILIPS 0x060000 +#define PRID_COMP_NXP 0x060000 #define PRID_COMP_TOSHIBA 0x070000 #define PRID_COMP_LSI 0x080000 #define PRID_COMP_LEXRA 0x0b0000 -- cgit v1.2.3-70-g09d2 From 0167509574ef1cdb516906db5e8b6ad5ca64ab61 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 24 Mar 2008 23:15:50 +0300 Subject: [MIPS] Alchemy: don't unmask timer IRQ early Defer the unmasking of the count/compare interrupt (IRQ5) till the clockevent driver initialization: - only enable the cascaded IRQs 0 thru 4 in arch_init_irq(); kill the ALLINTS macro -- this change is blessed by AMD as I saw it in their own patch; :-) - do not force IRQ5 enabled in plat_time_init() if PM is enabled and there's no 32 KHz crystal. Update the copyrights (taking into account my prior changes), also removing Pete Popov's old email... Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/irq.c | 7 +++---- arch/mips/au1000/common/time.c | 8 ++------ include/asm-mips/mach-au1x00/au1000.h | 12 ++---------- 3 files changed, 7 insertions(+), 20 deletions(-) (limited to 'include') diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c index 3c7714f057a..5528e1412b5 100644 --- a/arch/mips/au1000/common/irq.c +++ b/arch/mips/au1000/common/irq.c @@ -1,7 +1,6 @@ /* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2007-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. * * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) * @@ -591,7 +590,7 @@ void __init arch_init_irq(void) imp++; } - set_c0_status(ALLINTS); + set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4); /* Board specific IRQ initialization. */ diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index e122bbc6cd8..1966964590a 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -1,6 +1,6 @@ /* * - * Copyright (C) 2001 MontaVista Software, ppopov@mvista.com + * Copyright (C) 2001, 2006, 2008 MontaVista Software, * Copied and modified Carsten Langgaard's time.c * * Carsten Langgaard, carstenl@mips.com @@ -265,12 +265,8 @@ void __init plat_time_init(void) * Check to ensure we really have a 32KHz oscillator before * we do this. */ - if (no_au1xxx_32khz) { + if (no_au1xxx_32khz) printk("WARNING: no 32KHz clock found.\n"); - - /* Ensure we get CPO_COUNTER interrupts. */ - set_c0_status(IE_IRQ5); - } else { while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); au_writel(0, SYS_TOYWRITE); diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 5bb57bf2b9d..a88637a93e0 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -3,9 +3,8 @@ * BRIEF MODULE DESCRIPTION * Include file for Alchemy Semiconductor's Au1k CPU. * - * Copyright 2000,2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2000-2001, 2006-2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -117,13 +116,6 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #endif /* !defined (_LANGUAGE_ASSEMBLY) */ -#ifdef CONFIG_PM -/* no CP0 timer irq */ -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -#else -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) -#endif - /* * SDRAM Register Offsets */ -- cgit v1.2.3-70-g09d2 From 8aa62adafada6e3f29e12dacf1d6f491d2ba5f7f Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Apr 2008 00:55:24 +0900 Subject: [MIPS] make fallback gpio.h gpiolib-friendly If gpiolib was selected, asm-generic/gpio.h provides some prototypes for gpio API and implementation helpers. With this patch, platform code can implement its GPIO API using gpiolib without custom gpio.h file. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/mach-generic/gpio.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/asm-mips/mach-generic/gpio.h b/include/asm-mips/mach-generic/gpio.h index 6eaf5efedf3..e6b376bd9d0 100644 --- a/include/asm-mips/mach-generic/gpio.h +++ b/include/asm-mips/mach-generic/gpio.h @@ -1,12 +1,18 @@ #ifndef __ASM_MACH_GENERIC_GPIO_H #define __ASM_MACH_GENERIC_GPIO_H +#ifdef CONFIG_HAVE_GPIO_LIB +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#else int gpio_request(unsigned gpio, const char *label); void gpio_free(unsigned gpio); int gpio_direction_input(unsigned gpio); int gpio_direction_output(unsigned gpio, int value); int gpio_get_value(unsigned gpio); void gpio_set_value(unsigned gpio, int value); +#endif int gpio_to_irq(unsigned gpio); int irq_to_gpio(unsigned irq); -- cgit v1.2.3-70-g09d2 From a9aec7fe74cd912cad74ca621ed91cb1c37566ae Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Apr 2008 00:55:41 +0900 Subject: [MIPS] generic txx9 gpio support This is a board-independent TXx9 gpio API implementation using gpiolib. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 +++ arch/mips/kernel/Makefile | 2 + arch/mips/kernel/gpio_txx9.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ include/asm-mips/txx9pio.h | 29 +++++++++++++++ 4 files changed, 123 insertions(+) create mode 100644 arch/mips/kernel/gpio_txx9.c create mode 100644 include/asm-mips/txx9pio.h (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9e1fc966895..f4c313f9036 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -789,6 +789,11 @@ config CSRC_R4K config CSRC_SB1250 bool +config GPIO_TXX9 + select GENERIC_GPIO + select HAVE_GPIO_LIB + bool + config CFE bool diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index d0ca4d41bb7..87067e8fee9 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -81,6 +81,8 @@ obj-$(CONFIG_64BIT) += cpu-bugs64.o obj-$(CONFIG_I8253) += i8253.o +obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o + obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c new file mode 100644 index 00000000000..b1436a85799 --- /dev/null +++ b/arch/mips/kernel/gpio_txx9.c @@ -0,0 +1,87 @@ +/* + * A gpio chip driver for TXx9 SoCs + * + * Copyright (C) 2008 Atsushi Nemoto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +static DEFINE_SPINLOCK(txx9_gpio_lock); + +static struct txx9_pio_reg __iomem *txx9_pioptr; + +static int txx9_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return __raw_readl(&txx9_pioptr->din) & (1 << offset); +} + +static void txx9_gpio_set_raw(unsigned int offset, int value) +{ + u32 val; + val = __raw_readl(&txx9_pioptr->dout); + if (value) + val |= 1 << offset; + else + val &= ~(1 << offset); + __raw_writel(val, &txx9_pioptr->dout); +} + +static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); + txx9_gpio_set_raw(offset, value); + mmiowb(); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); +} + +static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset) +{ + spin_lock_irq(&txx9_gpio_lock); + __raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset), + &txx9_pioptr->dir); + mmiowb(); + spin_unlock_irq(&txx9_gpio_lock); + return 0; +} + +static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset, + int value) +{ + spin_lock_irq(&txx9_gpio_lock); + txx9_gpio_set_raw(offset, value); + __raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset), + &txx9_pioptr->dir); + mmiowb(); + spin_unlock_irq(&txx9_gpio_lock); + return 0; +} + +static struct gpio_chip txx9_gpio_chip = { + .get = txx9_gpio_get, + .set = txx9_gpio_set, + .direction_input = txx9_gpio_dir_in, + .direction_output = txx9_gpio_dir_out, + .label = "TXx9", +}; + +int __init txx9_gpio_init(unsigned long baseaddr, + unsigned int base, unsigned int num) +{ + txx9_pioptr = ioremap(baseaddr, sizeof(struct txx9_pio_reg)); + if (!txx9_pioptr) + return -ENODEV; + txx9_gpio_chip.base = base; + txx9_gpio_chip.ngpio = num; + return gpiochip_add(&txx9_gpio_chip); +} diff --git a/include/asm-mips/txx9pio.h b/include/asm-mips/txx9pio.h new file mode 100644 index 00000000000..3d6fa9f8d51 --- /dev/null +++ b/include/asm-mips/txx9pio.h @@ -0,0 +1,29 @@ +/* + * include/asm-mips/txx9pio.h + * TX39/TX49 PIO controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9PIO_H +#define __ASM_TXX9PIO_H + +#include + +struct txx9_pio_reg { + __u32 dout; + __u32 din; + __u32 dir; + __u32 od; + __u32 flag[2]; + __u32 pol; + __u32 intc; + __u32 maskcpu; + __u32 maskext; +}; + +int txx9_gpio_init(unsigned long baseaddr, + unsigned int base, unsigned int num); + +#endif /* __ASM_TXX9PIO_H */ -- cgit v1.2.3-70-g09d2 From 4cad154b30e7471628cb1943081c72b6368b079a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Apr 2008 00:56:09 +0900 Subject: [MIPS] rbhma4500: use generic txx9 gpio Use generic txx9 gpio (and gpiolib) for RBHMA4500 board. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- arch/mips/tx4938/toshiba_rbtx4938/setup.c | 133 ++++++++++-------------------- include/asm-mips/tx4938/tx4938.h | 14 +--- 3 files changed, 46 insertions(+), 103 deletions(-) (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f4c313f9036..abc485d3f41 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -654,7 +654,7 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB select GENERIC_HARDIRQS_NO__DO_IRQ - select GENERIC_GPIO + select GPIO_TXX9 help This Toshiba board is based on the TX4938 processor. Say Y here to support this machine type diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index 61249f049cd..b38ea5a9f5c 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -34,7 +35,7 @@ #endif #include #include -#include +#include extern char * __init prom_getcmdline(void); static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); @@ -615,9 +616,6 @@ static void __init rbtx4938_spi_setup(void) { /* set SPI_SEL */ tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; - /* chip selects for SPI devices */ - tx4938_pioptr->dout |= (1 << SEEPROM1_CS); - tx4938_pioptr->dir |= (1 << SEEPROM1_CS); } static struct resource rbtx4938_fpga_resource; @@ -780,8 +778,8 @@ void __init tx4938_board_setup(void) TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN); /* PIO */ - tx4938_pioptr->maskcpu = 0; - tx4938_pioptr->maskext = 0; + __raw_writel(0, &tx4938_pioptr->maskcpu); + __raw_writel(0, &tx4938_pioptr->maskext); /* TX4938 internal registers */ if (request_resource(&iomem_resource, &tx4938_reg_resource)) @@ -984,106 +982,48 @@ device_initcall(rbtx4938_ne_init); /* GPIO support */ +int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); -static void rbtx4938_spi_gpio_set(unsigned gpio, int value) +static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) { u8 val; unsigned long flags; - gpio -= 16; spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); val = *rbtx4938_spics_ptr; if (value) - val |= 1 << gpio; + val |= 1 << offset; else - val &= ~(1 << gpio); + val &= ~(1 << offset); *rbtx4938_spics_ptr = val; mmiowb(); spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); } -static int rbtx4938_spi_gpio_dir_out(unsigned gpio, int value) +static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, + unsigned int offset, int value) { - rbtx4938_spi_gpio_set(gpio, value); + rbtx4938_spi_gpio_set(chip, offset, value); return 0; } -static DEFINE_SPINLOCK(tx4938_gpio_lock); - -static int tx4938_gpio_get(unsigned gpio) -{ - return tx4938_pioptr->din & (1 << gpio); -} - -static void tx4938_gpio_set_raw(unsigned gpio, int value) -{ - u32 val; - val = tx4938_pioptr->dout; - if (value) - val |= 1 << gpio; - else - val &= ~(1 << gpio); - tx4938_pioptr->dout = val; -} - -static void tx4938_gpio_set(unsigned gpio, int value) -{ - unsigned long flags; - spin_lock_irqsave(&tx4938_gpio_lock, flags); - tx4938_gpio_set_raw(gpio, value); - mmiowb(); - spin_unlock_irqrestore(&tx4938_gpio_lock, flags); -} - -static int tx4938_gpio_dir_in(unsigned gpio) -{ - spin_lock_irq(&tx4938_gpio_lock); - tx4938_pioptr->dir &= ~(1 << gpio); - mmiowb(); - spin_unlock_irq(&tx4938_gpio_lock); - return 0; -} - -static int tx4938_gpio_dir_out(unsigned int gpio, int value) -{ - spin_lock_irq(&tx4938_gpio_lock); - tx4938_gpio_set_raw(gpio, value); - tx4938_pioptr->dir |= 1 << gpio; - mmiowb(); - spin_unlock_irq(&tx4938_gpio_lock); - return 0; -} - -int gpio_direction_input(unsigned gpio) -{ - if (gpio < 16) - return tx4938_gpio_dir_in(gpio); - return -EINVAL; -} - -int gpio_direction_output(unsigned gpio, int value) -{ - if (gpio < 16) - return tx4938_gpio_dir_out(gpio, value); - if (gpio < 16 + 3) - return rbtx4938_spi_gpio_dir_out(gpio, value); - return -EINVAL; -} - -int gpio_get_value(unsigned gpio) -{ - if (gpio < 16) - return tx4938_gpio_get(gpio); - return 0; -} - -void gpio_set_value(unsigned gpio, int value) -{ - if (gpio < 16) - tx4938_gpio_set(gpio, value); - else - rbtx4938_spi_gpio_set(gpio, value); -} +static struct gpio_chip rbtx4938_spi_gpio_chip = { + .set = rbtx4938_spi_gpio_set, + .direction_output = rbtx4938_spi_gpio_dir_out, + .label = "RBTX4938-SPICS", + .base = 16, + .ngpio = 3, +}; /* SPI support */ @@ -1118,10 +1058,25 @@ static int __init rbtx4938_spi_init(void) spi_eeprom_register(SEEPROM1_CS); spi_eeprom_register(16 + SEEPROM2_CS); spi_eeprom_register(16 + SEEPROM3_CS); + gpio_request(16 + SRTC_CS, "rtc-rs5c348"); + gpio_direction_output(16 + SRTC_CS, 0); + gpio_request(SEEPROM1_CS, "seeprom1"); + gpio_direction_output(SEEPROM1_CS, 1); + gpio_request(16 + SEEPROM2_CS, "seeprom2"); + gpio_direction_output(16 + SEEPROM2_CS, 1); + gpio_request(16 + SEEPROM3_CS, "seeprom3"); + gpio_direction_output(16 + SEEPROM3_CS, 1); txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); return 0; } -arch_initcall(rbtx4938_spi_init); + +static int __init rbtx4938_arch_init(void) +{ + txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); + gpiochip_add(&rbtx4938_spi_gpio_chip); + return rbtx4938_spi_init(); +} +arch_initcall(rbtx4938_arch_init); /* Watchdog support */ diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/tx4938/tx4938.h index f7c448b9057..a05f031cfdf 100644 --- a/include/asm-mips/tx4938/tx4938.h +++ b/include/asm-mips/tx4938/tx4938.h @@ -261,18 +261,6 @@ struct tx4938_sio_reg { volatile unsigned long rfifo; }; -struct tx4938_pio_reg { - volatile unsigned long dout; - volatile unsigned long din; - volatile unsigned long dir; - volatile unsigned long od; - volatile unsigned long flag[2]; - volatile unsigned long pol; - volatile unsigned long intc; - volatile unsigned long maskcpu; - volatile unsigned long maskext; -}; - struct tx4938_ndfmc_reg { endian_def_l2(unused0, dtr); endian_def_l2(unused1, mcr); @@ -642,7 +630,7 @@ struct tx4938_ccfg_reg { #define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG) #define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG) #define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch)) -#define tx4938_pioptr ((struct tx4938_pio_reg *)TX4938_PIO_REG) +#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) #define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG) #define tx4938_spiptr ((struct tx4938_spi_reg *)TX4938_SPI_REG) #define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG) -- cgit v1.2.3-70-g09d2 From 1bd0962e3d5bc66ee0ee207a61485c6a436cfac2 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Apr 2008 00:56:27 +0900 Subject: [MIPS] jmr3927: use generic txx9 gpio Use generic txx9 gpio (and gpiolib) for JMR3927 board. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/jmr3927/rbhma3100/setup.c | 11 ++++++++--- include/asm-mips/jmr3927/jmr3927.h | 4 ++-- include/asm-mips/jmr3927/tx3927.h | 2 +- include/asm-mips/jmr3927/txx927.h | 12 ------------ 5 files changed, 12 insertions(+), 18 deletions(-) (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index abc485d3f41..77e3d240245 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -613,6 +613,7 @@ config TOSHIBA_JMR3927 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 config TOSHIBA_RBTX4927 bool "Toshiba RBTX49[23]7 board" diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index c886d804d30..f39c444e42d 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -36,11 +36,13 @@ #include #include #include +#include #ifdef CONFIG_SERIAL_TXX9 #include #endif #include +#include #include #include #include @@ -340,9 +342,12 @@ static void __init tx3927_setup(void) /* PIO */ /* PIO[15:12] connected to LEDs */ - tx3927_pioptr->dir = 0x0000f000; - tx3927_pioptr->maskcpu = 0; - tx3927_pioptr->maskext = 0; + __raw_writel(0x0000f000, &tx3927_pioptr->dir); + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + gpio_request(11, "dipsw1"); + gpio_request(10, "dipsw2"); { unsigned int conf; diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h index 81602c8047e..a162268f17d 100644 --- a/include/asm-mips/jmr3927/jmr3927.h +++ b/include/asm-mips/jmr3927/jmr3927.h @@ -99,8 +99,8 @@ #define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) /* DIPSW4 macro */ -#define jmr3927_dipsw1() ((tx3927_pioptr->din & (1 << 11)) == 0) -#define jmr3927_dipsw2() ((tx3927_pioptr->din & (1 << 10)) == 0) +#define jmr3927_dipsw1() (gpio_get_value(11) == 0) +#define jmr3927_dipsw2() (gpio_get_value(10) == 0) #define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) #define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/jmr3927/tx3927.h index 338f99882a3..fb580333c10 100644 --- a/include/asm-mips/jmr3927/tx3927.h +++ b/include/asm-mips/jmr3927/tx3927.h @@ -314,6 +314,6 @@ struct tx3927_ccfg_reg { #define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) #define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch)) #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) -#define tx3927_pioptr ((struct txx927_pio_reg *)TX3927_PIO_REG) +#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) #endif /* __ASM_TX3927_H */ diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/jmr3927/txx927.h index 0474fe8dac3..25dcf2feb09 100644 --- a/include/asm-mips/jmr3927/txx927.h +++ b/include/asm-mips/jmr3927/txx927.h @@ -22,18 +22,6 @@ struct txx927_sio_reg { volatile unsigned long rfifo; }; -struct txx927_pio_reg { - volatile unsigned long dout; - volatile unsigned long din; - volatile unsigned long dir; - volatile unsigned long od; - volatile unsigned long flag[2]; - volatile unsigned long pol; - volatile unsigned long intc; - volatile unsigned long maskcpu; - volatile unsigned long maskext; -}; - /* * SIO */ -- cgit v1.2.3-70-g09d2 From 66140c8e9f0d978bd26c58f236d0d86aa666d8fc Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 14 Apr 2008 21:49:07 +0900 Subject: [MIPS] rbtx4938: misc cleanups * Do not use non-standard I/O accessors, such as reg_rd08, etc. * Kill unnecessary wbflush() * Kill tx4938_mips.h * Kill unnecessary includes Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/tx4938/common/dbgio.c | 4 +- arch/mips/tx4938/common/prom.c | 11 ++---- arch/mips/tx4938/toshiba_rbtx4938/irq.c | 46 +++++---------------- arch/mips/tx4938/toshiba_rbtx4938/setup.c | 66 ++++++++++++++----------------- include/asm-mips/tx4938/rbtx4938.h | 58 ++++++++++----------------- include/asm-mips/tx4938/tx4938.h | 24 ----------- include/asm-mips/tx4938/tx4938_mips.h | 54 ------------------------- 7 files changed, 63 insertions(+), 200 deletions(-) delete mode 100644 include/asm-mips/tx4938/tx4938_mips.h (limited to 'include') diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c index bea59ff1842..33b9c672a32 100644 --- a/arch/mips/tx4938/common/dbgio.c +++ b/arch/mips/tx4938/common/dbgio.c @@ -31,9 +31,7 @@ * Support for TX4938 in 2.6 - Hiroshi DOYU */ -#include -#include -#include +#include extern u8 txx9_sio_kdbg_rd(void); extern int txx9_sio_kdbg_wr( u8 ch ); diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c index 3189a65f7d7..20baeaeba4c 100644 --- a/arch/mips/tx4938/common/prom.c +++ b/arch/mips/tx4938/common/prom.c @@ -13,13 +13,8 @@ */ #include -#include -#include -#include - -#include -#include -#include +#include +#include static unsigned int __init tx4938_process_sdccr(u64 * addr) @@ -35,7 +30,7 @@ tx4938_process_sdccr(u64 * addr) unsigned int bc = 4; unsigned int msize = 0; - val = (*((vu64 *) (addr))); + val = ____raw_readq((void __iomem *)addr); /* MVMCP -- need #defs for these bits masks */ sdccr_ce = ((val & (1 << 10)) >> 10); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index f00185017e8..4d6a8dc46c7 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -67,24 +67,7 @@ IRQ Device 63 RBTX4938-IOC/07 SWINT */ #include -#include -#include -#include -#include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include #include static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); @@ -99,21 +82,16 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { .unmask = toshiba_rbtx4938_irq_ioc_enable, }; -#define TOSHIBA_RBTX4938_IOC_INTR_ENAB 0xb7f02000 -#define TOSHIBA_RBTX4938_IOC_INTR_STAT 0xb7f0200a - int toshiba_rbtx4938_irq_nested(int sw_irq) { u8 level3; - level3 = reg_rd08(TOSHIBA_RBTX4938_IOC_INTR_STAT) & 0xff; - if (level3) { + level3 = readb(rbtx4938_imstat_addr); + if (level3) /* must use fls so onboard ATA has priority */ sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; - } - wbflush(); return sw_irq; } @@ -144,25 +122,23 @@ toshiba_rbtx4938_irq_ioc_init(void) static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) { - volatile unsigned char v; + unsigned char v; - v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB); + v = readb(rbtx4938_imask_addr); v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v); + writeb(v, rbtx4938_imask_addr); mmiowb(); - TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB); } static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) { - volatile unsigned char v; + unsigned char v; - v = TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB); + v = readb(rbtx4938_imask_addr); v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - TX4938_WR08(TOSHIBA_RBTX4938_IOC_INTR_ENAB, v); + writeb(v, rbtx4938_imask_addr); mmiowb(); - TX4938_RD08(TOSHIBA_RBTX4938_IOC_INTR_ENAB); } void __init arch_init_irq(void) @@ -174,14 +150,12 @@ void __init arch_init_irq(void) /* all IRC interrupt mode are Low Active. */ /* mask all IOC interrupts */ - *rbtx4938_imask_ptr = 0; + writeb(0, rbtx4938_imask_addr); /* clear SoftInt interrupts */ - *rbtx4938_softint_ptr = 0; + writeb(0, rbtx4938_softint_addr); tx4938_irq_init(); toshiba_rbtx4938_irq_ioc_init(); /* Onboard 10M Ether: High Active */ set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); - - wbflush(); } diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c index b38ea5a9f5c..2fbf7d4c3c7 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c @@ -23,7 +23,6 @@ #include #include -#include #include #include #include @@ -91,12 +90,11 @@ void rbtx4938_machine_restart(char *command) local_irq_disable(); printk("Rebooting..."); - *rbtx4938_softresetlock_ptr = 1; - *rbtx4938_sfvol_ptr = 1; - *rbtx4938_softreset_ptr = 1; - wbflush(); - - while(1); + writeb(1, rbtx4938_softresetlock_addr); + writeb(1, rbtx4938_sfvol_addr); + writeb(1, rbtx4938_softreset_addr); + while(1) + ; } void __init @@ -488,7 +486,7 @@ static int __init tx4938_pcibios_init(void) } /* Reset PCI Bus */ - *rbtx4938_pcireset_ptr = 0; + writeb(0, rbtx4938_pcireset_addr); /* Reset PCIC */ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; if (txboard_pci66_mode > 0) @@ -496,8 +494,8 @@ static int __init tx4938_pcibios_init(void) mdelay(10); /* clear PCIC reset */ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - *rbtx4938_pcireset_ptr = 1; - wbflush(); + writeb(1, rbtx4938_pcireset_addr); + mmiowb(); tx4938_report_pcic_status1(tx4938_pcicptr); tx4938_report_pciclk(); @@ -505,15 +503,15 @@ static int __init tx4938_pcibios_init(void) if (txboard_pci66_mode == 0 && txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { /* Reset PCI Bus */ - *rbtx4938_pcireset_ptr = 0; + writeb(0, rbtx4938_pcireset_addr); /* Reset PCIC */ tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; tx4938_pciclk66_setup(); mdelay(10); /* clear PCIC reset */ tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - *rbtx4938_pcireset_ptr = 1; - wbflush(); + writeb(1, rbtx4938_pcireset_addr); + mmiowb(); /* Reinitialize PCIC */ tx4938_report_pciclk(); tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); @@ -774,8 +772,9 @@ void __init tx4938_board_setup(void) txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); /* enable DMA */ - TX4938_WR64(0xff1fb150, TX4938_DMA_MCR_MSTEN); - TX4938_WR64(0xff1fb950, TX4938_DMA_MCR_MSTEN); + for (i = 0; i < 2; i++) + ____raw_writeq(TX4938_DMA_MCR_MSTEN, + (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); /* PIO */ __raw_writel(0, &tx4938_pioptr->maskcpu); @@ -861,10 +860,6 @@ void __init plat_mem_setup(void) if (txx9_master_clock == 0) txx9_master_clock = 25000000; /* 25MHz */ tx4938_board_setup(); - /* setup serial stuff */ - TX4938_WR(0xff1ff314, 0x00000000); /* h/w flow control off */ - TX4938_WR(0xff1ff414, 0x00000000); /* h/w flow control off */ - #ifndef CONFIG_PCI set_io_port_base(RBTX4938_ETHER_BASE); #endif @@ -930,16 +925,16 @@ void __init plat_mem_setup(void) pcfg = tx4938_ccfgptr->pcfg; /* updated */ /* fixup piosel */ if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_ATA_SEL) { - *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x04; - } + TX4938_PCFG_ATA_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, + rbtx4938_piosel_addr); else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_NDF_SEL) { - *rbtx4938_piosel_ptr = (*rbtx4938_piosel_ptr & 0x03) | 0x08; - } - else { - *rbtx4938_piosel_ptr &= ~(0x08 | 0x04); - } + TX4938_PCFG_NDF_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, + rbtx4938_piosel_addr); + else + writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), + rbtx4938_piosel_addr); rbtx4938_fpga_resource.name = "FPGA Registers"; rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); @@ -948,17 +943,14 @@ void __init plat_mem_setup(void) if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) printk("request resource for fpga failed\n"); - /* disable all OnBoard I/O interrupts */ - *rbtx4938_imask_ptr = 0; - _machine_restart = rbtx4938_machine_restart; _machine_halt = rbtx4938_machine_halt; pm_power_off = rbtx4938_machine_power_off; - *rbtx4938_led_ptr = 0xff; - printk("RBTX4938 --- FPGA(Rev %02x)", *rbtx4938_fpga_rev_ptr); - printk(" DIPSW:%02x,%02x\n", - *rbtx4938_dipsw_ptr, *rbtx4938_bdipsw_ptr); + writeb(0xff, rbtx4938_led_addr); + printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", + readb(rbtx4938_fpga_rev_addr), + readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); } static int __init rbtx4938_ne_init(void) @@ -1000,12 +992,12 @@ static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, u8 val; unsigned long flags; spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); - val = *rbtx4938_spics_ptr; + val = readb(rbtx4938_spics_addr); if (value) val |= 1 << offset; else val &= ~(1 << offset); - *rbtx4938_spics_ptr = val; + writeb(val, rbtx4938_spics_addr); mmiowb(); spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); } diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/tx4938/rbtx4938.h index b180488dcdc..dfed7beb533 100644 --- a/include/asm-mips/tx4938/rbtx4938.h +++ b/include/asm-mips/tx4938/rbtx4938.h @@ -67,44 +67,26 @@ #define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM) #define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT) -#define rbtx4938_fpga_rev_ptr \ - ((volatile unsigned char *)RBTX4938_FPGA_REV_ADDR) -#define rbtx4938_led_ptr \ - ((volatile unsigned char *)RBTX4938_LED_ADDR) -#define rbtx4938_dipsw_ptr \ - ((volatile unsigned char *)RBTX4938_DIPSW_ADDR) -#define rbtx4938_bdipsw_ptr \ - ((volatile unsigned char *)RBTX4938_BDIPSW_ADDR) -#define rbtx4938_imask_ptr \ - ((volatile unsigned char *)RBTX4938_IMASK_ADDR) -#define rbtx4938_imask2_ptr \ - ((volatile unsigned char *)RBTX4938_IMASK2_ADDR) -#define rbtx4938_intpol_ptr \ - ((volatile unsigned char *)RBTX4938_INTPOL_ADDR) -#define rbtx4938_istat_ptr \ - ((volatile unsigned char *)RBTX4938_ISTAT_ADDR) -#define rbtx4938_istat2_ptr \ - ((volatile unsigned char *)RBTX4938_ISTAT2_ADDR) -#define rbtx4938_imstat_ptr \ - ((volatile unsigned char *)RBTX4938_IMSTAT_ADDR) -#define rbtx4938_imstat2_ptr \ - ((volatile unsigned char *)RBTX4938_IMSTAT2_ADDR) -#define rbtx4938_softint_ptr \ - ((volatile unsigned char *)RBTX4938_SOFTINT_ADDR) -#define rbtx4938_piosel_ptr \ - ((volatile unsigned char *)RBTX4938_PIOSEL_ADDR) -#define rbtx4938_spics_ptr \ - ((volatile unsigned char *)RBTX4938_SPICS_ADDR) -#define rbtx4938_sfpwr_ptr \ - ((volatile unsigned char *)RBTX4938_SFPWR_ADDR) -#define rbtx4938_sfvol_ptr \ - ((volatile unsigned char *)RBTX4938_SFVOL_ADDR) -#define rbtx4938_softreset_ptr \ - ((volatile unsigned char *)RBTX4938_SOFTRESET_ADDR) -#define rbtx4938_softresetlock_ptr \ - ((volatile unsigned char *)RBTX4938_SOFTRESETLOCK_ADDR) -#define rbtx4938_pcireset_ptr \ - ((volatile unsigned char *)RBTX4938_PCIRESET_ADDR) +#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR) +#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR) +#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR) +#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR) +#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR) +#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR) +#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR) +#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR) +#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR) +#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR) +#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR) +#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR) +#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR) +#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) +#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) +#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) +#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) +#define rbtx4938_softresetlock_addr \ + ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) +#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) /* * IRQ mappings diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/tx4938/tx4938.h index a05f031cfdf..e8807f5c61e 100644 --- a/include/asm-mips/tx4938/tx4938.h +++ b/include/asm-mips/tx4938/tx4938.h @@ -13,8 +13,6 @@ #ifndef __ASM_TX_BOARDS_TX4938_H #define __ASM_TX_BOARDS_TX4938_H -#include - #define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr)) #define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b) @@ -54,28 +52,6 @@ #define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) #define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) -#ifndef _LANGUAGE_ASSEMBLY -#include - -#define TX4938_MKA(x) ((u32)( ((u32)(TX4938_REG_BASE)) | ((u32)(x)) )) - -#define TX4938_RD08( reg ) (*(vu08*)(reg)) -#define TX4938_WR08( reg, val ) ((*(vu08*)(reg))=(val)) - -#define TX4938_RD16( reg ) (*(vu16*)(reg)) -#define TX4938_WR16( reg, val ) ((*(vu16*)(reg))=(val)) - -#define TX4938_RD32( reg ) (*(vu32*)(reg)) -#define TX4938_WR32( reg, val ) ((*(vu32*)(reg))=(val)) - -#define TX4938_RD64( reg ) (*(vu64*)(reg)) -#define TX4938_WR64( reg, val ) ((*(vu64*)(reg))=(val)) - -#define TX4938_RD( reg ) TX4938_RD32( reg ) -#define TX4938_WR( reg, val ) TX4938_WR32( reg, val ) - -#endif /* !__ASSEMBLY__ */ - #ifdef __ASSEMBLY__ #define _CONST64(c) c #else diff --git a/include/asm-mips/tx4938/tx4938_mips.h b/include/asm-mips/tx4938/tx4938_mips.h deleted file mode 100644 index f346ff58b94..00000000000 --- a/include/asm-mips/tx4938/tx4938_mips.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-mips/tx4938/tx4938_mips.h - * Generic bitmask definitions - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#ifndef TX4938_TX4938_MIPS_H -#define TX4938_TX4938_MIPS_H -#ifndef __ASSEMBLY__ - -#define reg_rd08(r) ((u8 )(*((vu8 *)(r)))) -#define reg_rd16(r) ((u16)(*((vu16*)(r)))) -#define reg_rd32(r) ((u32)(*((vu32*)(r)))) -#define reg_rd64(r) ((u64)(*((vu64*)(r)))) - -#define reg_wr08(r, v) ((*((vu8 *)(r)))=((u8 )(v))) -#define reg_wr16(r, v) ((*((vu16*)(r)))=((u16)(v))) -#define reg_wr32(r, v) ((*((vu32*)(r)))=((u32)(v))) -#define reg_wr64(r, v) ((*((vu64*)(r)))=((u64)(v))) - -typedef volatile __signed char vs8; -typedef volatile unsigned char vu8; - -typedef volatile __signed short vs16; -typedef volatile unsigned short vu16; - -typedef volatile __signed int vs32; -typedef volatile unsigned int vu32; - -typedef s8 s08; -typedef vs8 vs08; - -typedef u8 u08; -typedef vu8 vu08; - -#if (_MIPS_SZLONG == 64) - -typedef volatile __signed__ long vs64; -typedef volatile unsigned long vu64; - -#else - -typedef volatile __signed__ long long vs64; -typedef volatile unsigned long long vu64; - -#endif -#endif -#endif -- cgit v1.2.3-70-g09d2 From 6ed436932d1417534aa1a738fd9585795f954304 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 22 Apr 2008 23:28:57 +0400 Subject: [MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- include/asm-mips/mach-au1x00/au1000.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'include') diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index a88637a93e0..a05555165d0 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1685,20 +1685,6 @@ enum soc_au1200_ints { #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xffffffff - /* - * Borrowed from the PPC arch: - * The following macro is used to lookup irqs in a standard table - * format for those PPC systems that do not already have PCI - * interrupts properly routed. - */ - /* FIXME - double check this from asm-ppc/pci-bridge.h */ -#define PCI_IRQ_TABLE_LOOKUP \ - ({ long _ctl_ = -1; \ - if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \ - _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \ - _ctl_; }) - - #else /* Au1000 and Au1100 and Au1200 */ /* don't allow any legacy ports probing */ -- cgit v1.2.3-70-g09d2 From 4247417d8457b326ede001cb74af8570b5aa302b Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 24 Apr 2008 09:48:40 +0900 Subject: [MIPS] add DECstation I/O ASIC clocksource Add DECstation I/O ASIC clocksource Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 +++ arch/mips/dec/time.c | 2 +- arch/mips/kernel/Makefile | 1 + arch/mips/kernel/csrc-ioasic.c | 65 ++++++++++++++++++++++++++++++++++++++++++ include/asm-mips/dec/ioasic.h | 2 ++ 5 files changed, 73 insertions(+), 1 deletion(-) create mode 100644 arch/mips/kernel/csrc-ioasic.c (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 77e3d240245..2e4ac657a4c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -82,6 +82,7 @@ config MACH_DECSTATION bool "DECstations" select BOOT_ELF32 select CEVT_R4K + select CSRC_IOASIC select CSRC_R4K select CPU_DADDI_WORKAROUNDS if 64BIT select CPU_R4000_WORKAROUNDS if 64BIT @@ -784,6 +785,9 @@ config CEVT_TXX9 config CSRC_BCM1480 bool +config CSRC_IOASIC + bool + config CSRC_R4K bool diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 60349062595..0cbab8d0052 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -165,7 +165,7 @@ void __init plat_time_init(void) if (!cpu_has_counter && IOASIC) /* For pre-R4k systems we use the I/O ASIC's counter. */ - clocksource_mips.read = dec_ioasic_hpt_read; + dec_ioasic_clocksource_init(); /* Set up the rate of periodic DS1287 interrupts. */ CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A); diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 87067e8fee9..00ac35e501b 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o +obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c new file mode 100644 index 00000000000..1d5f63cf899 --- /dev/null +++ b/arch/mips/kernel/csrc-ioasic.c @@ -0,0 +1,65 @@ +/* + * DEC I/O ASIC's counter clocksource + * + * Copyright (C) 2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include + +#include +#include +#include +#include + +static cycle_t dec_ioasic_hpt_read(void) +{ + return ioasic_read(IO_REG_FCTR); +} + +static struct clocksource clocksource_dec = { + .name = "dec-ioasic", + .read = dec_ioasic_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +void __init dec_ioasic_clocksource_init(void) +{ + unsigned int freq; + u32 start, end; + int i = HZ / 10; + + + while (!ds1287_timer_state()) + ; + + start = dec_ioasic_hpt_read(); + + while (i--) + while (!ds1287_timer_state()) + ; + + end = dec_ioasic_hpt_read(); + + freq = (end - start) * 10; + printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); + + clocksource_dec.rating = 200 + freq / 10000000; + clocksource_set_clock(&clocksource_dec, freq); + + clocksource_register(&clocksource_dec); +} diff --git a/include/asm-mips/dec/ioasic.h b/include/asm-mips/dec/ioasic.h index 486a5b0a130..98badd6bf22 100644 --- a/include/asm-mips/dec/ioasic.h +++ b/include/asm-mips/dec/ioasic.h @@ -33,4 +33,6 @@ static inline u32 ioasic_read(unsigned int reg) extern void init_ioasic_irqs(int base); +extern void dec_ioasic_clocksource_init(void); + #endif /* __ASM_DEC_IOASIC_H */ -- cgit v1.2.3-70-g09d2 From 6457d9fc3bb87c72db03cfb34cd414c8fb9b8edf Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 25 Apr 2008 12:11:44 +0900 Subject: [MIPS] DS1287: Add clockevent driver Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ++ arch/mips/dec/time.c | 69 +++++++--------------- arch/mips/kernel/Makefile | 1 + arch/mips/kernel/cevt-ds1287.c | 129 +++++++++++++++++++++++++++++++++++++++++ include/asm-mips/ds1287.h | 27 +++++++++ 5 files changed, 183 insertions(+), 47 deletions(-) create mode 100644 arch/mips/kernel/cevt-ds1287.c create mode 100644 include/asm-mips/ds1287.h (limited to 'include') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2e4ac657a4c..e5a7c5d9636 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -81,6 +81,7 @@ config MIPS_COBALT config MACH_DECSTATION bool "DECstations" select BOOT_ELF32 + select CEVT_DS1287 select CEVT_R4K select CSRC_IOASIC select CSRC_R4K @@ -770,6 +771,9 @@ config BOOT_RAW config CEVT_BCM1480 bool +config CEVT_DS1287 + bool + config CEVT_GT641XX bool diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 0cbab8d0052..3965fda94a8 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -9,30 +9,15 @@ * */ #include -#include #include -#include -#include #include -#include -#include #include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include #include #include -#include #include unsigned long read_persistent_clock(void) @@ -139,42 +124,32 @@ int rtc_mips_set_mmss(unsigned long nowtime) return retval; } -static int dec_timer_state(void) +void __init plat_time_init(void) { - return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0; -} + u32 start, end; + int i = HZ / 10; -static void dec_timer_ack(void) -{ - CMOS_READ(RTC_REG_C); /* Ack the RTC interrupt. */ -} + /* Set up the rate of periodic DS1287 interrupts. */ + ds1287_set_base_clock(HZ); -static cycle_t dec_ioasic_hpt_read(void) -{ - /* - * The free-running counter is 32-bit which is good for about - * 2 minutes, 50 seconds at possible count rates of up to 25MHz. - */ - return ioasic_read(IO_REG_FCTR); -} + if (cpu_has_counter) { + while (!ds1287_timer_state()) + ; + start = read_c0_count(); -void __init plat_time_init(void) -{ - mips_timer_ack = dec_timer_ack; + while (i--) + while (!ds1287_timer_state()) + ; + + end = read_c0_count(); - if (!cpu_has_counter && IOASIC) + mips_hpt_frequency = (end - start) * 10; + printk(KERN_INFO "MIPS counter frequency %dHz\n", + mips_hpt_frequency); + } else if (IOASIC) /* For pre-R4k systems we use the I/O ASIC's counter. */ dec_ioasic_clocksource_init(); - /* Set up the rate of periodic DS1287 interrupts. */ - CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A); -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - setup_irq(dec_interrupt[DEC_IRQ_RTC], irq); - - /* Enable periodic DS1287 interrupts. */ - CMOS_WRITE(CMOS_READ(RTC_REG_B) | RTC_PIE, RTC_REG_B); + ds1287_clockevent_init(dec_interrupt[DEC_IRQ_RTC]); } diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 00ac35e501b..45545be3eb8 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -10,6 +10,7 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \ obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c new file mode 100644 index 00000000000..df4acb68bfb --- /dev/null +++ b/arch/mips/kernel/cevt-ds1287.c @@ -0,0 +1,129 @@ +/* + * DS1287 clockevent driver + * + * Copyright (C) 2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include + +#include + +int ds1287_timer_state(void) +{ + return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0; +} + +int ds1287_set_base_clock(unsigned int hz) +{ + u8 rate; + + switch (hz) { + case 128: + rate = 0x9; + break; + case 256: + rate = 0x8; + break; + case 1024: + rate = 0x6; + break; + default: + return -EINVAL; + } + + CMOS_WRITE(RTC_REF_CLCK_32KHZ | rate, RTC_REG_A); + + return 0; +} + +static int ds1287_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + return -EINVAL; +} + +static void ds1287_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + u8 val; + + spin_lock(&rtc_lock); + + val = CMOS_READ(RTC_REG_B); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + val |= RTC_PIE; + break; + default: + val &= ~RTC_PIE; + break; + } + + CMOS_WRITE(val, RTC_REG_B); + + spin_unlock(&rtc_lock); +} + +static void ds1287_event_handler(struct clock_event_device *dev) +{ +} + +static struct clock_event_device ds1287_clockevent = { + .name = "ds1287", + .features = CLOCK_EVT_FEAT_PERIODIC, + .cpumask = CPU_MASK_CPU0, + .set_next_event = ds1287_set_next_event, + .set_mode = ds1287_set_mode, + .event_handler = ds1287_event_handler, +}; + +static irqreturn_t ds1287_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd = &ds1287_clockevent; + + /* Ack the RTC interrupt. */ + CMOS_READ(RTC_REG_C); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static struct irqaction ds1287_irqaction = { + .handler = ds1287_interrupt, + .flags = IRQF_DISABLED | IRQF_PERCPU, + .name = "ds1287", +}; + +int __init ds1287_clockevent_init(int irq) +{ + struct clock_event_device *cd; + + cd = &ds1287_clockevent; + cd->rating = 100; + cd->irq = irq; + clockevent_set_clock(cd, 32768); + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + + clockevents_register_device(&ds1287_clockevent); + + return setup_irq(irq, &ds1287_irqaction); +} diff --git a/include/asm-mips/ds1287.h b/include/asm-mips/ds1287.h new file mode 100644 index 00000000000..ba1702e8693 --- /dev/null +++ b/include/asm-mips/ds1287.h @@ -0,0 +1,27 @@ +/* + * DS1287 timer functions. + * + * Copyright (C) 2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_DS1287_H +#define __ASM_DS1287_H + +extern int ds1287_timer_state(void); +extern void ds1287_set_base_clock(unsigned int clock); +extern int ds1287_clockevent_init(int irq); + +#endif -- cgit v1.2.3-70-g09d2 From 411ba7fcba54b30ba4ce2c492ea8d20f1d0db996 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 26 Apr 2008 01:55:30 +0900 Subject: [MIPS] Fix some sparse warnings on traps.c and irq-msc01.c * Declare board_bind_eic_interrupt, board_watchpoint_handler in traps.h * Make msc_bind_eic_interrupt static and fix its argument types. * Make msc_levelirq_type, msc_edgeirq_type static. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq-msc01.c | 10 ++++------ include/asm-mips/traps.h | 2 ++ 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 4edc7e451d9..963c16d266a 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -17,6 +17,7 @@ #include #include #include +#include static unsigned long _icctrl_msc; #define MSC01_IC_REG_BASE _icctrl_msc @@ -98,14 +99,13 @@ void ll_msc_irq(void) } } -void -msc_bind_eic_interrupt(unsigned int irq, unsigned int set) +static void msc_bind_eic_interrupt(int irq, int set) { MSCIC_WRITE(MSC01_IC_RAMW, (irq< Date: Wed, 23 Apr 2008 18:55:59 +0300 Subject: [MIPS] IP27: Fix build bug due to missing include asm-mips/mach-ip27/topology.h must #include This fixes the following compile error: ... CC kernel/sched.o /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function 'find_next_best_node': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: implicit declaration of function 'node_to_cpumask_ptr' /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: '__tmp__' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7015: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function 'sched_domain_node_span': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7047: error: 'nodemask' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7048: warning: ISO C90 forbids mixed declarations and code /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7059: error: implicit declaration of function 'node_to_cpumask_ptr_next' /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c: In function '__build_sched_domains': /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/sched.c:7605: error: 'pnodemask' undeclared (first use in this function) make[2]: *** [kernel/sched.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Ralf Baechle --- include/asm-mips/mach-ip27/topology.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h index 372291f53fb..7785bec732f 100644 --- a/include/asm-mips/mach-ip27/topology.h +++ b/include/asm-mips/mach-ip27/topology.h @@ -54,4 +54,6 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; .nr_balance_failed = 0, \ } +#include + #endif /* _ASM_MACH_TOPOLOGY_H */ -- cgit v1.2.3-70-g09d2 From fcbd3b4b92efe29b59df16b910138cf43683be88 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 28 Apr 2008 19:54:38 +0400 Subject: [MIPS] Pb1200/DBAu1200: move platform code to its proper place Since both the IDE interface and SMC 91C111 Ethernet chip are on-board devices, not SOC devices, move the platform device registration form the common to the board specific code. While at it, remove semicolon (which didn't break compilation only by chance) from the AU1XXX_ATA_DDMA_REQ macro and do some renaming: - change 'au1200_ide0_' variable name prefix to the mere 'ide_'; - change 'smc91x_' variable name prefix to 'smc91c111_' since that's the name of the chip used on the boards; - drop 'AU1XXX_' prefix from the names of macros describing IDE and Ethernet on-board devices; - change 'SMC91111_' to 'SMC91C111_', change 'IRQ' to 'INT' in the names of the macros describing the Ethernet chip for consistency with the IDE macros; - change 'ATA_' to 'IDE_' and 'OFFSET' to 'SHIFT' (since this value is indeed a shift count) in the names of the macros describing the IDE interface. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/platform.c | 54 ---------------------- arch/mips/au1000/pb1200/Makefile | 1 + arch/mips/au1000/pb1200/platform.c | 84 +++++++++++++++++++++++++++++++++++ drivers/ide/mips/au1xxx-ide.c | 8 ++-- include/asm-mips/mach-db1x00/db1200.h | 18 ++++---- include/asm-mips/mach-pb1x00/pb1200.h | 18 ++++---- 6 files changed, 107 insertions(+), 76 deletions(-) create mode 100644 arch/mips/au1000/pb1200/platform.c (limited to 'include') diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 83ad422e8ac..31d2a227087 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -233,19 +233,6 @@ static struct resource au1200_lcd_resources[] = { } }; -static struct resource au1200_ide0_resources[] = { - [0] = { - .start = AU1XXX_ATA_PHYS_ADDR, - .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1XXX_ATA_INT, - .end = AU1XXX_ATA_INT, - .flags = IORESOURCE_IRQ, - } -}; - static u64 au1200_lcd_dmamask = ~(u32)0; static struct platform_device au1200_lcd_device = { @@ -259,20 +246,6 @@ static struct platform_device au1200_lcd_device = { .resource = au1200_lcd_resources, }; - -static u64 ide0_dmamask = ~(u32)0; - -static struct platform_device au1200_ide0_device = { - .name = "au1200-ide", - .id = 0, - .dev = { - .dma_mask = &ide0_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(au1200_ide0_resources), - .resource = au1200_ide0_resources, -}; - static u64 au1xxx_mmc_dmamask = ~(u32)0; static struct platform_device au1xxx_mmc_device = { @@ -292,29 +265,6 @@ static struct platform_device au1x00_pcmcia_device = { .id = 0, }; -#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = AU1XXX_SMC91111_PHYS_ADDR, - .end = AU1XXX_SMC91111_PHYS_ADDR + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AU1XXX_SMC91111_IRQ, - .end = AU1XXX_SMC91111_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; -#endif /* defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) */ - /* All Alchemy demoboards with I2C have this #define in their headers */ #ifdef SMBUS_PSC_BASE static struct resource pbdb_smbus_resources[] = { @@ -345,12 +295,8 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, - &au1200_ide0_device, &au1xxx_mmc_device, #endif -#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - &smc91x_device, -#endif #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile index 970b1b1d5cd..4fe02ea65a6 100644 --- a/arch/mips/au1000/pb1200/Makefile +++ b/arch/mips/au1000/pb1200/Makefile @@ -3,5 +3,6 @@ # lib-y := init.o board_setup.o irqmap.o +obj-y += platform.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c new file mode 100644 index 00000000000..5930110b9b6 --- /dev/null +++ b/arch/mips/au1000/pb1200/platform.c @@ -0,0 +1,84 @@ +/* + * Pb1200/DBAu1200 board platform device registration + * + * Copyright (C) 2008 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#include + +static struct resource ide_resources[] = { + [0] = { + .start = IDE_PHYS_ADDR, + .end = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = IDE_INT, + .end = IDE_INT, + .flags = IORESOURCE_IRQ + } +}; + +static u64 ide_dmamask = ~(u32)0; + +static struct platform_device ide_device = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ide_resources), + .resource = ide_resources +}; + +static struct resource smc91c111_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = SMC91C111_PHYS_ADDR, + .end = SMC91C111_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = SMC91C111_INT, + .end = SMC91C111_INT, + .flags = IORESOURCE_IRQ + }, +}; + +static struct platform_device smc91c111_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91c111_resources), + .resource = smc91c111_resources +}; + +static struct platform_device *board_platform_devices[] __initdata = { + &ide_device, + &smc91c111_device +}; + +static int __init board_register_devices(void) +{ + return platform_add_devices(board_platform_devices, + ARRAY_SIZE(board_platform_devices)); +} + +arch_initcall(board_register_devices); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 296b9c674ba..e0cf5e2dbab 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -359,7 +359,7 @@ static void auide_ddma_rx_callback(int irq, void *param) static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) { dev->dev_id = dev_id; - dev->dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + dev->dev_physaddr = (u32)IDE_PHYS_ADDR; dev->dev_intlevel = 0; dev->dev_intpolarity = 0; dev->dev_tsize = tsize; @@ -397,7 +397,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - dev_id = AU1XXX_ATA_DDMA_REQ; + dev_id = IDE_DDMA_REQ; tsize = 8; /* 1 */ devwidth = 32; /* 16 */ @@ -506,10 +506,10 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) /* FIXME? */ for (i = 0; i < 8; i++) - *ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET); + *ata_regs++ = ahwif->regbase + (i << IDE_REG_SHIFT); /* set the Alternative Status register */ - *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); + *ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT); } static const struct ide_port_ops au1xxx_port_ops = { diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index d2e28e64932..eedd048a726 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -169,15 +169,15 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 -#define AU1XXX_SMC91111_PHYS_ADDR (0x19000300) -#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT - -#define AU1XXX_ATA_PHYS_ADDR (0x18800000) -#define AU1XXX_ATA_REG_OFFSET (5) -#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET) -#define AU1XXX_ATA_INT DB1200_IDE_INT -#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; -#define AU1XXX_ATA_RQSIZE 128 +#define SMC91C111_PHYS_ADDR 0x19000300 +#define SMC91C111_INT DB1200_ETH_INT + +#define IDE_PHYS_ADDR 0x18800000 +#define IDE_REG_SHIFT 5 +#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define IDE_INT DB1200_IDE_INT +#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 +#define IDE_RQSIZE 128 #define NAND_PHYS_ADDR 0x20000000 diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index edaa489b58f..e2c6bcac3b4 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -182,15 +182,15 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define SET_VCC_VPP(VCC, VPP, SLOT)\ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) -#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300) -#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT - -#define AU1XXX_ATA_PHYS_ADDR (0x0C800000) -#define AU1XXX_ATA_REG_OFFSET (5) -#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET) -#define AU1XXX_ATA_INT PB1200_IDE_INT -#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; -#define AU1XXX_ATA_RQSIZE 128 +#define SMC91C111_PHYS_ADDR 0x0D000300 +#define SMC91C111_INT PB1200_ETH_INT + +#define IDE_PHYS_ADDR 0x0C800000 +#define IDE_REG_SHIFT 5 +#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define IDE_INT PB1200_IDE_INT +#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 +#define IDE_RQSIZE 128 #define NAND_PHYS_ADDR 0x1C000000 -- cgit v1.2.3-70-g09d2