From 6ecec74520d8a357726e6c12f99080dbe7b347dd Mon Sep 17 00:00:00 2001
From: Keith Busch <keith.busch@intel.com>
Date: Wed, 26 Sep 2012 12:49:27 -0600
Subject: NVMe: Define SMART log
This data structure is defined in the NVMe specification. It's not used
by the kernel, but is available for use by userspace software.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
---
include/linux/nvme.h | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
(limited to 'include')
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index c25cccaa555..4fa3b0b9b07 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -137,6 +137,34 @@ enum {
NVME_LBAF_RP_DEGRADED = 3,
};
+struct nvme_smart_log {
+ __u8 critical_warning;
+ __u8 temperature[2];
+ __u8 avail_spare;
+ __u8 spare_thresh;
+ __u8 percent_used;
+ __u8 rsvd6[26];
+ __u8 data_units_read[16];
+ __u8 data_units_written[16];
+ __u8 host_reads[16];
+ __u8 host_writes[16];
+ __u8 ctrl_busy_time[16];
+ __u8 power_cycles[16];
+ __u8 power_on_hours[16];
+ __u8 unsafe_shutdowns[16];
+ __u8 media_errors[16];
+ __u8 num_err_log_entries[16];
+ __u8 rsvd192[320];
+};
+
+enum {
+ NVME_SMART_CRIT_SPARE = 1 << 0,
+ NVME_SMART_CRIT_TEMPERATURE = 1 << 1,
+ NVME_SMART_CRIT_RELIABILITY = 1 << 2,
+ NVME_SMART_CRIT_MEDIA = 1 << 3,
+ NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4,
+};
+
struct nvme_lba_range_type {
__u8 type;
__u8 attributes;
--
cgit v1.2.3-70-g09d2
From 0e367ae46503cfe7791460c8ba8434a5d60b2bd5 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@citrix.com>
Date: Thu, 7 Mar 2013 17:32:01 +0000
Subject: xen/blkback: correctly respond to unknown, non-native requests
If the frontend is using a non-native protocol (e.g., a 64-bit
frontend with a 32-bit backend) and it sent an unrecognized request,
the request was not translated and the response would have the
incorrect ID. This may cause the frontend driver to behave
incorrectly or crash.
Since the ID field in the request is always in the same place,
regardless of the request type we can get the correct ID and make a
valid response (which will report BLKIF_RSP_EOPNOTSUPP).
This bug affected 64-bit SLES 11 guests when using a 32-bit backend.
This guest does a BLKIF_OP_RESERVED_1 (BLKIF_OP_PACKET in the SLES
source) and would crash in blkif_int() as the ID in the response would
be invalid.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
drivers/block/xen-blkback/blkback.c | 31 +++++++++++++++++++++++++++----
drivers/block/xen-blkback/common.h | 25 +++++++++++++++++++++++++
include/xen/interface/io/blkif.h | 10 ++++++++++
3 files changed, 62 insertions(+), 4 deletions(-)
(limited to 'include')
diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c
index 6d1cc3df2ac..1a0faf6370c 100644
--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -679,6 +679,16 @@ static int dispatch_discard_io(struct xen_blkif *blkif,
return err;
}
+static int dispatch_other_io(struct xen_blkif *blkif,
+ struct blkif_request *req,
+ struct pending_req *pending_req)
+{
+ free_req(pending_req);
+ make_response(blkif, req->u.other.id, req->operation,
+ BLKIF_RSP_EOPNOTSUPP);
+ return -EIO;
+}
+
static void xen_blk_drain_io(struct xen_blkif *blkif)
{
atomic_set(&blkif->drain, 1);
@@ -800,17 +810,30 @@ __do_block_io_op(struct xen_blkif *blkif)
/* Apply all sanity checks to /private copy/ of request. */
barrier();
- if (unlikely(req.operation == BLKIF_OP_DISCARD)) {
+
+ switch (req.operation) {
+ case BLKIF_OP_READ:
+ case BLKIF_OP_WRITE:
+ case BLKIF_OP_WRITE_BARRIER:
+ case BLKIF_OP_FLUSH_DISKCACHE:
+ if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ case BLKIF_OP_DISCARD:
free_req(pending_req);
if (dispatch_discard_io(blkif, &req))
- break;
- } else if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ default:
+ if (dispatch_other_io(blkif, &req, pending_req))
+ goto done;
break;
+ }
/* Yield point for this unbounded loop. */
cond_resched();
}
-
+done:
return more_to_do;
}
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 6072390c7f5..195278ae993 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -77,11 +77,18 @@ struct blkif_x86_32_request_discard {
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_32_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_32_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_32_request_rw rw;
struct blkif_x86_32_request_discard discard;
+ struct blkif_x86_32_request_other other;
} u;
} __attribute__((__packed__));
@@ -113,11 +120,19 @@ struct blkif_x86_64_request_discard {
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_64_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint32_t _pad3; /* offsetof(blkif_..,u.discard.id)==8 */
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_64_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_64_request_rw rw;
struct blkif_x86_64_request_discard discard;
+ struct blkif_x86_64_request_other other;
} u;
} __attribute__((__packed__));
@@ -278,6 +293,11 @@ static inline void blkif_get_x86_32_req(struct blkif_request *dst,
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
@@ -309,6 +329,11 @@ static inline void blkif_get_x86_64_req(struct blkif_request *dst,
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
diff --git a/include/xen/interface/io/blkif.h b/include/xen/interface/io/blkif.h
index 01c3d62436e..ffd4652de91 100644
--- a/include/xen/interface/io/blkif.h
+++ b/include/xen/interface/io/blkif.h
@@ -138,11 +138,21 @@ struct blkif_request_discard {
uint8_t _pad3;
} __attribute__((__packed__));
+struct blkif_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2; /* only for read/write requests */
+#ifdef CONFIG_X86_64
+ uint32_t _pad3; /* offsetof(blkif_req..,u.other.id)==8*/
+#endif
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_request_rw rw;
struct blkif_request_discard discard;
+ struct blkif_request_other other;
} u;
} __attribute__((__packed__));
--
cgit v1.2.3-70-g09d2
From 0ec83bd2460ed6aed0e7f29f9e0633b054621c02 Mon Sep 17 00:00:00 2001
From: Chanwoo Choi <cw00.choi@samsung.com>
Date: Wed, 13 Mar 2013 17:38:57 +0900
Subject: extcon: max77693: Initialize register of MUIC device to bring up it
without platform data
This patch set default value of MUIC register to bring up MUIC device.
If user don't set some initial value for MUIC device through platform data,
extcon-max77693 driver use 'default_init_data' to bring up base operation
of MAX77693 MUIC device.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
---
drivers/extcon/extcon-max77693.c | 93 ++++++++++++++++++++++++++----------
include/linux/mfd/max77693-private.h | 23 +++++++++
2 files changed, 91 insertions(+), 25 deletions(-)
(limited to 'include')
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index fea10624f3e..8f3c947b002 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -32,6 +32,38 @@
#define DEV_NAME "max77693-muic"
#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
+/*
+ * Default value of MAX77693 register to bring up MUIC device.
+ * If user don't set some initial value for MUIC device through platform data,
+ * extcon-max77693 driver use 'default_init_data' to bring up base operation
+ * of MAX77693 MUIC device.
+ */
+struct max77693_reg_data default_init_data[] = {
+ {
+ /* STATUS2 - [3]ChgDetRun */
+ .addr = MAX77693_MUIC_REG_STATUS2,
+ .data = STATUS2_CHGDETRUN_MASK,
+ }, {
+ /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
+ .addr = MAX77693_MUIC_REG_INTMASK1,
+ .data = INTMASK1_ADC1K_MASK
+ | INTMASK1_ADC_MASK,
+ }, {
+ /* INTMASK2 - Unmask [0]ChgTypM */
+ .addr = MAX77693_MUIC_REG_INTMASK2,
+ .data = INTMASK2_CHGTYP_MASK,
+ }, {
+ /* INTMASK3 - Mask all of interrupts */
+ .addr = MAX77693_MUIC_REG_INTMASK3,
+ .data = 0x0,
+ }, {
+ /* CDETCTRL2 */
+ .addr = MAX77693_MUIC_REG_CDETCTRL2,
+ .data = CDETCTRL2_VIDRMEN_MASK
+ | CDETCTRL2_DXOVPEN_MASK,
+ },
+};
+
enum max77693_muic_adc_debounce_time {
ADC_DEBOUNCE_TIME_5MS = 0,
ADC_DEBOUNCE_TIME_10MS,
@@ -1046,6 +1078,8 @@ static int max77693_muic_probe(struct platform_device *pdev)
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
struct max77693_muic_info *info;
+ struct max77693_reg_data *init_data;
+ int num_init_data;
int delay_jiffies;
int ret;
int i;
@@ -1144,35 +1178,44 @@ static int max77693_muic_probe(struct platform_device *pdev)
goto err_irq;
}
+
+ /* Initialize MUIC register by using platform data or default data */
if (pdata->muic_data) {
- struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
+ init_data = pdata->muic_data->init_data;
+ num_init_data = pdata->muic_data->num_init_data;
+ } else {
+ init_data = default_init_data;
+ num_init_data = ARRAY_SIZE(default_init_data);
+ }
+
+ for (i = 0 ; i < num_init_data ; i++) {
+ enum max77693_irq_source irq_src
+ = MAX77693_IRQ_GROUP_NR;
- /* Initialize MUIC register by using platform data */
- for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
- enum max77693_irq_source irq_src
- = MAX77693_IRQ_GROUP_NR;
-
- max77693_write_reg(info->max77693->regmap_muic,
- muic_pdata->init_data[i].addr,
- muic_pdata->init_data[i].data);
-
- switch (muic_pdata->init_data[i].addr) {
- case MAX77693_MUIC_REG_INTMASK1:
- irq_src = MUIC_INT1;
- break;
- case MAX77693_MUIC_REG_INTMASK2:
- irq_src = MUIC_INT2;
- break;
- case MAX77693_MUIC_REG_INTMASK3:
- irq_src = MUIC_INT3;
- break;
- }
-
- if (irq_src < MAX77693_IRQ_GROUP_NR)
- info->max77693->irq_masks_cur[irq_src]
- = muic_pdata->init_data[i].data;
+ max77693_write_reg(info->max77693->regmap_muic,
+ init_data[i].addr,
+ init_data[i].data);
+
+ switch (init_data[i].addr) {
+ case MAX77693_MUIC_REG_INTMASK1:
+ irq_src = MUIC_INT1;
+ break;
+ case MAX77693_MUIC_REG_INTMASK2:
+ irq_src = MUIC_INT2;
+ break;
+ case MAX77693_MUIC_REG_INTMASK3:
+ irq_src = MUIC_INT3;
+ break;
}
+ if (irq_src < MAX77693_IRQ_GROUP_NR)
+ info->max77693->irq_masks_cur[irq_src]
+ = init_data[i].data;
+ }
+
+ if (pdata->muic_data) {
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
+
/*
* Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
* h/w path of COMP2/COMN1 on CONTROL1 register.
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 5b18ecde69b..1aa4f13cdfa 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -106,6 +106,29 @@ enum max77693_muic_reg {
MAX77693_MUIC_REG_END,
};
+/* MAX77693 INTMASK1~2 Register */
+#define INTMASK1_ADC1K_SHIFT 3
+#define INTMASK1_ADCERR_SHIFT 2
+#define INTMASK1_ADCLOW_SHIFT 1
+#define INTMASK1_ADC_SHIFT 0
+#define INTMASK1_ADC1K_MASK (1 << INTMASK1_ADC1K_SHIFT)
+#define INTMASK1_ADCERR_MASK (1 << INTMASK1_ADCERR_SHIFT)
+#define INTMASK1_ADCLOW_MASK (1 << INTMASK1_ADCLOW_SHIFT)
+#define INTMASK1_ADC_MASK (1 << INTMASK1_ADC_SHIFT)
+
+#define INTMASK2_VIDRM_SHIFT 5
+#define INTMASK2_VBVOLT_SHIFT 4
+#define INTMASK2_DXOVP_SHIFT 3
+#define INTMASK2_DCDTMR_SHIFT 2
+#define INTMASK2_CHGDETRUN_SHIFT 1
+#define INTMASK2_CHGTYP_SHIFT 0
+#define INTMASK2_VIDRM_MASK (1 << INTMASK2_VIDRM_SHIFT)
+#define INTMASK2_VBVOLT_MASK (1 << INTMASK2_VBVOLT_SHIFT)
+#define INTMASK2_DXOVP_MASK (1 << INTMASK2_DXOVP_SHIFT)
+#define INTMASK2_DCDTMR_MASK (1 << INTMASK2_DCDTMR_SHIFT)
+#define INTMASK2_CHGDETRUN_MASK (1 << INTMASK2_CHGDETRUN_SHIFT)
+#define INTMASK2_CHGTYP_MASK (1 << INTMASK2_CHGTYP_SHIFT)
+
/* MAX77693 MUIC - STATUS1~3 Register */
#define STATUS1_ADC_SHIFT (0)
#define STATUS1_ADCLOW_SHIFT (5)
--
cgit v1.2.3-70-g09d2
From a79eac7165ed62114e6ca197195aa5060a54f137 Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@gmail.com>
Date: Tue, 5 Feb 2013 14:35:11 +0100
Subject: atmel_lcdfb: fix 16-bpp modes on older SOCs
Fix regression introduced by commit 787f9fd23283 ("atmel_lcdfb: support
16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp
modes for older SOCs which use IBGR:555 (msb is intensity) rather
than BGR:565.
Use SOC-type to determine the pixel layout.
Tested on at91sam9263 and at91sam9g45.
Cc: <stable@vger.kernel.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/video/atmel_lcdfb.c | 22 +++++++++++++++-------
include/video/atmel_lcdc.h | 1 +
2 files changed, 16 insertions(+), 7 deletions(-)
(limited to 'include')
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 12cf5f31ee8..025428e04c3 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -422,17 +422,22 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
@@ -679,8 +684,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
@@ -870,6 +874,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
}
sinfo->info = info;
sinfo->pdev = pdev;
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+ cpu_is_at91sam9rl()) {
+ sinfo->have_intensity_bit = true;
+ }
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 28447f1594f..5f0e234026c 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -62,6 +62,7 @@ struct atmel_lcdfb_info {
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+ bool have_intensity_bit;
};
#define ATMEL_LCDC_DMABADDR1 0x00
--
cgit v1.2.3-70-g09d2
From 67cf9c0a00bd88443adb7d6c3efa8b18d03f97c5 Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@gmail.com>
Date: Wed, 13 Mar 2013 10:56:13 +0100
Subject: ARM: at91: fix LCD-wiring mode
Fix regression introduced by commit 787f9fd23283 ("atmel_lcdfb: support
16bit BGR:565 mode, remove unsupported 15bit modes") which broke 16-bpp
modes for older SOCs which use IBGR:555 (msb is intensity) rather than
BGR:565.
The above commit removes the RGB:555-wiring hack by
removing the no longer used ATMEL_LCDC_WIRING_RGB555 define.
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
include/video/atmel_lcdc.h | 1 -
1 file changed, 1 deletion(-)
(limited to 'include')
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 5f0e234026c..8deb22672ad 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -30,7 +30,6 @@
*/
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
-#define ATMEL_LCDC_WIRING_RGB555 2
/* LCD Controller info data structure, stored in device platform_data */
--
cgit v1.2.3-70-g09d2
From 5b9e12dbf92b441b37136ea71dac59f05f2673a9 Mon Sep 17 00:00:00 2001
From: "Denis V. Lunev" <den@openvz.org>
Date: Wed, 13 Mar 2013 00:24:15 +0000
Subject: ipv4: fix definition of FIB_TABLE_HASHSZ
a long time ago by the commit
commit 93456b6d7753def8760b423ac6b986eb9d5a4a95
Author: Denis V. Lunev <den@openvz.org>
Date: Thu Jan 10 03:23:38 2008 -0800
[IPV4]: Unify access to the routing tables.
the defenition of FIB_HASH_TABLE size has obtained wrong dependency:
it should depend upon CONFIG_IP_MULTIPLE_TABLES (as was in the original
code) but it was depended from CONFIG_IP_ROUTE_MULTIPATH
This patch returns the situation to the original state.
The problem was spotted by Tingwei Liu.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Tingwei Liu <tingw.liu@gmail.com>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/net/ip_fib.h | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
(limited to 'include')
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 9497be1ad4c..e49db91593a 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -152,18 +152,16 @@ struct fib_result_nl {
};
#ifdef CONFIG_IP_ROUTE_MULTIPATH
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel])
-
-#define FIB_TABLE_HASHSZ 2
-
#else /* CONFIG_IP_ROUTE_MULTIPATH */
-
#define FIB_RES_NH(res) ((res).fi->fib_nh[0])
+#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#ifdef CONFIG_IP_MULTIPLE_TABLES
#define FIB_TABLE_HASHSZ 256
-
-#endif /* CONFIG_IP_ROUTE_MULTIPATH */
+#else
+#define FIB_TABLE_HASHSZ 2
+#endif
extern __be32 fib_info_update_nh_saddr(struct net *net, struct fib_nh *nh);
--
cgit v1.2.3-70-g09d2
From 5bc7c33ca93a285dcfe7b7fd64970f6314440ad1 Mon Sep 17 00:00:00 2001
From: Brian Norris <computersforpeace@gmail.com>
Date: Wed, 13 Mar 2013 09:51:31 -0700
Subject: mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY
This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e
("mtd: nand: kill NAND_NO_READRDY").
In that patch I overlooked a few things.
The original documentation for NAND_NO_READRDY included "True for all
large page devices, as they do not support autoincrement." I was
conflating "not support autoincrement" with the NAND_NO_AUTOINCR option,
which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I
concluded that I then could harmlessly drop NAND_NO_READRDY. But of
course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean
NAND_NO_READRDY was doing nothing...
So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied
only to those few remaining small-page NAND which needed it in the first
place.
Cc: stable@kernel.org [3.5+]
Reported-by: Alexander Shiyan <shc_work@mail.ru>
Tested-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
drivers/mtd/nand/nand_base.c | 16 +++++++++
drivers/mtd/nand/nand_ids.c | 80 +++++++++++++++++++++++---------------------
include/linux/mtd/nand.h | 7 ++++
3 files changed, 64 insertions(+), 39 deletions(-)
(limited to 'include')
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 43214151b88..42c63927609 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1523,6 +1523,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
@@ -1787,6 +1795,14 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index e3aa2748a6e..9c612388e5d 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,49 +22,51 @@
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},
/*
* These are the new chips with large page size. The pagesize and the
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7ccb3c59ed6..ef52d9c9145 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -187,6 +187,13 @@ typedef enum {
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
--
cgit v1.2.3-70-g09d2
From 16fad69cfe4adbbfa813de516757b87bcae36d93 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <edumazet@google.com>
Date: Thu, 14 Mar 2013 05:40:32 +0000
Subject: tcp: fix skb_availroom()
Chrome OS team reported a crash on a Pixel ChromeBook in TCP stack :
https://code.google.com/p/chromium/issues/detail?id=182056
commit a21d45726acac (tcp: avoid order-1 allocations on wifi and tx
path) did a poor choice adding an 'avail_size' field to skb, while
what we really needed was a 'reserved_tailroom' one.
It would have avoided commit 22b4a4f22da (tcp: fix retransmit of
partially acked frames) and this commit.
Crash occurs because skb_split() is not aware of the 'avail_size'
management (and should not be aware)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Mukesh Agrawal <quiche@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/linux/skbuff.h | 7 +++++--
net/ipv4/tcp.c | 2 +-
net/ipv4/tcp_output.c | 1 -
3 files changed, 6 insertions(+), 4 deletions(-)
(limited to 'include')
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 821c7f45d2a..6f2bb860e05 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -500,7 +500,7 @@ struct sk_buff {
union {
__u32 mark;
__u32 dropcount;
- __u32 avail_size;
+ __u32 reserved_tailroom;
};
sk_buff_data_t inner_transport_header;
@@ -1447,7 +1447,10 @@ static inline int skb_tailroom(const struct sk_buff *skb)
*/
static inline int skb_availroom(const struct sk_buff *skb)
{
- return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
+ if (skb_is_nonlinear(skb))
+ return 0;
+
+ return skb->end - skb->tail - skb->reserved_tailroom;
}
/**
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 47e854fcae2..e2202079070 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -775,7 +775,7 @@ struct sk_buff *sk_stream_alloc_skb(struct sock *sk, int size, gfp_t gfp)
* Make sure that we have exactly size bytes
* available to the caller, no more, no less.
*/
- skb->avail_size = size;
+ skb->reserved_tailroom = skb->end - skb->tail - size;
return skb;
}
__kfree_skb(skb);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index e2b4461074d..817fbb396bc 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1298,7 +1298,6 @@ static void __pskb_trim_head(struct sk_buff *skb, int len)
eat = min_t(int, len, skb_headlen(skb));
if (eat) {
__skb_pull(skb, eat);
- skb->avail_size -= eat;
len -= eat;
if (!len)
return;
--
cgit v1.2.3-70-g09d2
From cca7af3889bfa343d33d5e657a38d876abd10e58 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@parallels.com>
Date: Thu, 14 Mar 2013 03:29:40 +0000
Subject: skb: Propagate pfmemalloc on skb from head page only
Hi.
I'm trying to send big chunks of memory from application address space via
TCP socket using vmsplice + splice like this
mem = mmap(128Mb);
vmsplice(pipe[1], mem); /* splice memory into pipe */
splice(pipe[0], tcp_socket); /* send it into network */
When I'm lucky and a huge page splices into the pipe and then into the socket
_and_ client and server ends of the TCP connection are on the same host,
communicating via lo, the whole connection gets stuck! The sending queue
becomes full and app stops writing/splicing more into it, but the receiving
queue remains empty, and that's why.
The __skb_fill_page_desc observes a tail page of a huge page and erroneously
propagates its page->pfmemalloc value onto socket (the pfmemalloc on tail pages
contain garbage). Then this skb->pfmemalloc leaks through lo and due to the
tcp_v4_rcv
sk_filter
if (skb->pfmemalloc && !sock_flag(sk, SOCK_MEMALLOC)) /* true */
return -ENOMEM
goto release_and_discard;
no packets reach the socket. Even TCP re-transmits are dropped by this, as skb
cloning clones the pfmemalloc flag as well.
That said, here's the proper page->pfmemalloc propagation onto socket: we
must check the huge-page's head page only, other pages' pfmemalloc and mapping
values do not contain what is expected in this place. However, I'm not sure
whether this fix is _complete_, since pfmemalloc propagation via lo also
oesn't look great.
Both, bit propagation from page to skb and this check in sk_filter, were
introduced by c48a11c7 (netvm: propagate page->pfmemalloc to skb), in v3.5 so
Mel and stable@ are in Cc.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/linux/skbuff.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
(limited to 'include')
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 6f2bb860e05..441f5bfdab8 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1288,11 +1288,13 @@ static inline void __skb_fill_page_desc(struct sk_buff *skb, int i,
* do not lose pfmemalloc information as the pages would not be
* allocated using __GFP_MEMALLOC.
*/
- if (page->pfmemalloc && !page->mapping)
- skb->pfmemalloc = true;
frag->page.p = page;
frag->page_offset = off;
skb_frag_size_set(frag, size);
+
+ page = compound_head(page);
+ if (page->pfmemalloc && !page->mapping)
+ skb->pfmemalloc = true;
}
/**
--
cgit v1.2.3-70-g09d2
From aaa0c23cb90141309f5076ba5e3bfbd39544b985 Mon Sep 17 00:00:00 2001
From: Zhouyi Zhou <zhouzhouyi@gmail.com>
Date: Thu, 14 Mar 2013 17:21:50 +0000
Subject: Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug
When neighbour table is full, dst_neigh_lookup/dst_neigh_lookup_skb will return
-ENOBUFS which is absolutely non zero, while all the code in kernel which use
above functions assume failure only on zero return which will cause panic. (for
example: : https://bugzilla.kernel.org/show_bug.cgi?id=54731).
This patch corrects above error with smallest changes to kernel source code and
also correct two return value check missing bugs in drivers/infiniband/hw/cxgb4/cm.c
Tested on my x86_64 SMP machine
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/infiniband/hw/cxgb4/cm.c | 12 ++++++++++++
include/net/dst.h | 6 ++++--
2 files changed, 16 insertions(+), 2 deletions(-)
(limited to 'include')
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 565bfb161c1..a3fde52840c 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1575,6 +1575,12 @@ static int c4iw_reconnect(struct c4iw_ep *ep)
neigh = dst_neigh_lookup(ep->dst,
&ep->com.cm_id->remote_addr.sin_addr.s_addr);
+ if (!neigh) {
+ pr_err("%s - cannot alloc neigh.\n", __func__);
+ err = -ENOMEM;
+ goto fail4;
+ }
+
/* get a l2t entry */
if (neigh->dev->flags & IFF_LOOPBACK) {
PDBG("%s LOOPBACK\n", __func__);
@@ -3053,6 +3059,12 @@ static int rx_pkt(struct c4iw_dev *dev, struct sk_buff *skb)
dst = &rt->dst;
neigh = dst_neigh_lookup_skb(dst, skb);
+ if (!neigh) {
+ pr_err("%s - failed to allocate neigh!\n",
+ __func__);
+ goto free_dst;
+ }
+
if (neigh->dev->flags & IFF_LOOPBACK) {
pdev = ip_dev_find(&init_net, iph->daddr);
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
diff --git a/include/net/dst.h b/include/net/dst.h
index 853cda11e51..1f8fd109e22 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -413,13 +413,15 @@ static inline int dst_neigh_output(struct dst_entry *dst, struct neighbour *n,
static inline struct neighbour *dst_neigh_lookup(const struct dst_entry *dst, const void *daddr)
{
- return dst->ops->neigh_lookup(dst, NULL, daddr);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, NULL, daddr);
+ return IS_ERR(n) ? NULL : n;
}
static inline struct neighbour *dst_neigh_lookup_skb(const struct dst_entry *dst,
struct sk_buff *skb)
{
- return dst->ops->neigh_lookup(dst, skb, NULL);
+ struct neighbour *n = dst->ops->neigh_lookup(dst, skb, NULL);
+ return IS_ERR(n) ? NULL : n;
}
static inline void dst_link_failure(struct sk_buff *skb)
--
cgit v1.2.3-70-g09d2
From b75bbaa038ffc426e88ea3df6c4ae11834fc3e4f Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexander.deucher@amd.com>
Date: Fri, 8 Mar 2013 13:36:54 -0500
Subject: drm/radeon: add Richland pci ids
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
---
include/drm/drm_pciids.h | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
(limited to 'include')
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index a386b0b654c..918e8fe2f5e 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -581,7 +581,11 @@
{0x1002, 0x9908, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9909, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x990A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
- {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x990F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9910, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9913, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9917, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
@@ -592,6 +596,13 @@
{0x1002, 0x9992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9993, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9994, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9995, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9996, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9997, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9998, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9999, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x999A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x999B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x99A4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_ARUBA|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
--
cgit v1.2.3-70-g09d2
From 1eef1282549d7accdd33ee36d409b039b1f911fb Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 11 Mar 2013 09:07:46 -0300
Subject: amd64_edac: Correct DIMM sizes
We were filling the csrow size with a wrong value. 16a528ee3975 ("EDAC:
Fix csrow size reported in sysfs") tried to address the issue. It fixed
the report with the old API but not with the new one. Correct it for the
new API too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[ make it a per-csrow accounting regardless of ->channel_count ]
Signed-off-by: Borislav Petkov <bp@suse.de>
---
drivers/edac/amd64_edac.c | 14 +++++++++-----
drivers/edac/edac_mc_sysfs.c | 13 +++----------
include/linux/edac.h | 1 -
3 files changed, 12 insertions(+), 16 deletions(-)
(limited to 'include')
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 910b0116c12..532de775a18 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2048,12 +2048,18 @@ static int init_csrows(struct mem_ctl_info *mci)
edac_dbg(1, "MC node: %d, csrow: %d\n",
pvt->mc_node_id, i);
- if (row_dct0)
+ if (row_dct0) {
nr_pages = amd64_csrow_nr_pages(pvt, 0, i);
+ csrow->channels[0]->dimm->nr_pages = nr_pages;
+ }
/* K8 has only one DCT */
- if (boot_cpu_data.x86 != 0xf && row_dct1)
- nr_pages += amd64_csrow_nr_pages(pvt, 1, i);
+ if (boot_cpu_data.x86 != 0xf && row_dct1) {
+ int row_dct1_pages = amd64_csrow_nr_pages(pvt, 1, i);
+
+ csrow->channels[1]->dimm->nr_pages = row_dct1_pages;
+ nr_pages += row_dct1_pages;
+ }
mtype = amd64_determine_memory_type(pvt, i);
@@ -2072,9 +2078,7 @@ static int init_csrows(struct mem_ctl_info *mci)
dimm = csrow->channels[j]->dimm;
dimm->mtype = mtype;
dimm->edac_mode = edac_mode;
- dimm->nr_pages = nr_pages;
}
- csrow->nr_pages = nr_pages;
}
return empty;
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 0cbf670efa2..4c50a4760db 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -180,9 +180,6 @@ static ssize_t csrow_size_show(struct device *dev,
int i;
u32 nr_pages = 0;
- if (csrow->mci->csbased)
- return sprintf(data, "%u\n", PAGES_TO_MiB(csrow->nr_pages));
-
for (i = 0; i < csrow->nr_channels; i++)
nr_pages += csrow->channels[i]->dimm->nr_pages;
return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
@@ -778,14 +775,10 @@ static ssize_t mci_size_mb_show(struct device *dev,
for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
struct csrow_info *csrow = mci->csrows[csrow_idx];
- if (csrow->mci->csbased) {
- total_pages += csrow->nr_pages;
- } else {
- for (j = 0; j < csrow->nr_channels; j++) {
- struct dimm_info *dimm = csrow->channels[j]->dimm;
+ for (j = 0; j < csrow->nr_channels; j++) {
+ struct dimm_info *dimm = csrow->channels[j]->dimm;
- total_pages += dimm->nr_pages;
- }
+ total_pages += dimm->nr_pages;
}
}
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 4fd4999ccb5..ab1ea98e767 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -561,7 +561,6 @@ struct csrow_info {
u32 ue_count; /* Uncorrectable Errors for this csrow */
u32 ce_count; /* Correctable Errors for this csrow */
- u32 nr_pages; /* combined pages count of all channels */
struct mem_ctl_info *mci; /* the parent */
--
cgit v1.2.3-70-g09d2
From 9713faecff3d071de1208b081d4943b002e9cb1c Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Mon, 11 Mar 2013 09:28:48 -0300
Subject: EDAC: Merge mci.mem_is_per_rank with mci.csbased
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the
memory controller is csrows based. Merge both fields into one.
There's no need for the driver to actually fill it, as the core detects
it by checking if one of the layers has the csrows type as part of the
memory hierarchy:
if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT)
per_rank = true;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
---
drivers/edac/amd64_edac.c | 1 -
drivers/edac/edac_mc.c | 6 +++---
drivers/edac/edac_mc_sysfs.c | 2 +-
include/linux/edac.h | 6 ++----
4 files changed, 6 insertions(+), 9 deletions(-)
(limited to 'include')
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 532de775a18..e1d13c463c9 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2423,7 +2423,6 @@ static int amd64_init_one_instance(struct pci_dev *F2)
mci->pvt_info = pvt;
mci->pdev = &pvt->F2->dev;
- mci->csbased = 1;
setup_mci_misc_attrs(mci, fam_type);
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index cdb81aa73ab..27e86d93826 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -86,7 +86,7 @@ static void edac_mc_dump_dimm(struct dimm_info *dimm, int number)
edac_dimm_info_location(dimm, location, sizeof(location));
edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n",
- dimm->mci->mem_is_per_rank ? "rank" : "dimm",
+ dimm->mci->csbased ? "rank" : "dimm",
number, location, dimm->csrow, dimm->cschannel);
edac_dbg(4, " dimm = %p\n", dimm);
edac_dbg(4, " dimm->label = '%s'\n", dimm->label);
@@ -341,7 +341,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
memcpy(mci->layers, layers, sizeof(*layer) * n_layers);
mci->nr_csrows = tot_csrows;
mci->num_cschannel = tot_channels;
- mci->mem_is_per_rank = per_rank;
+ mci->csbased = per_rank;
/*
* Alocate and fill the csrow/channels structs
@@ -1235,7 +1235,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
* incrementing the compat API counters
*/
edac_dbg(4, "%s csrows map: (%d,%d)\n",
- mci->mem_is_per_rank ? "rank" : "dimm",
+ mci->csbased ? "rank" : "dimm",
dimm->csrow, dimm->cschannel);
if (row == -1)
row = dimm->csrow;
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 4c50a4760db..5899a76eec3 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -609,7 +609,7 @@ static int edac_create_dimm_object(struct mem_ctl_info *mci,
device_initialize(&dimm->dev);
dimm->dev.parent = &mci->dev;
- if (mci->mem_is_per_rank)
+ if (mci->csbased)
dev_set_name(&dimm->dev, "rank%d", index);
else
dev_set_name(&dimm->dev, "dimm%d", index);
diff --git a/include/linux/edac.h b/include/linux/edac.h
index ab1ea98e767..0b763276f61 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -675,11 +675,11 @@ struct mem_ctl_info {
* sees memory sticks ("dimms"), and the ones that sees memory ranks.
* All old memory controllers enumerate memories per rank, but most
* of the recent drivers enumerate memories per DIMM, instead.
- * When the memory controller is per rank, mem_is_per_rank is true.
+ * When the memory controller is per rank, csbased is true.
*/
unsigned n_layers;
struct edac_mc_layer *layers;
- bool mem_is_per_rank;
+ bool csbased;
/*
* DIMM info. Will eventually remove the entire csrows_info some day
@@ -740,8 +740,6 @@ struct mem_ctl_info {
u32 fake_inject_ue;
u16 fake_inject_count;
#endif
- __u8 csbased : 1, /* csrow-based memory controller */
- __resv : 7;
};
#endif
--
cgit v1.2.3-70-g09d2
From 1e8bbe6cd02fc300c88bd48244ce61ad9c7d1776 Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Thu, 14 Mar 2013 01:05:13 +0000
Subject: net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards
compatibility
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices")
introduced a new policy, preferring MBIM for dual NCM/MBIM functions if
the cdc_mbim driver was enabled. This caused a regression for users
wanting to use NCM.
Devices implementing NCM backwards compatibility according to section
3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single
USB function, using different altsettings. The cdc_ncm and cdc_mbim
drivers will both probe such functions, and must agree on a common
policy for selecting either MBIM or NCM. Until now, this policy has
been set at build time based on CONFIG_USB_NET_CDC_MBIM.
Use a module parameter to set the system policy at runtime, allowing the
user to prefer NCM on systems with the cdc_mbim driver.
Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@stericsson.com>
Reported-by: Geir Haatveit <nospam@haatveit.nu>
Reported-by: Tommi Kyntola <kynde@ts.ray.fi>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/usb/cdc_mbim.c | 11 +---------
drivers/net/usb/cdc_ncm.c | 49 +++++++++++++++++++++++++++++----------------
include/linux/usb/cdc_ncm.h | 1 +
3 files changed, 34 insertions(+), 27 deletions(-)
(limited to 'include')
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 248d2dc765a..16c84299729 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -68,18 +68,9 @@ static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
- u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM;
+ u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
struct cdc_mbim_state *info = (void *)&dev->data;
- /* see if interface supports MBIM alternate setting */
- if (intf->num_altsetting == 2) {
- if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM);
- data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
- }
-
/* Probably NCM, defer for cdc_ncm_bind */
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 61b74a2b89a..4709fa3497c 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -55,6 +55,14 @@
#define DRIVER_VERSION "14-Mar-2012"
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
static void cdc_ncm_txpath_bh(unsigned long param);
static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
@@ -550,9 +558,12 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf)
}
EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
-static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+/* Select the MBIM altsetting iff it is preferred and available,
+ * returning the number of the corresponding data interface altsetting
+ */
+u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ struct usb_host_interface *alt;
/* The MBIM spec defines a NCM compatible default altsetting,
* which we may have matched:
@@ -568,23 +579,27 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
* endpoint descriptors, shall be constructed according to
* the rules given in section 6 (USB Device Model) of this
* specification."
- *
- * Do not bind to such interfaces, allowing cdc_mbim to handle
- * them
*/
-#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
- if ((intf->num_altsetting == 2) &&
- !usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM)) {
- if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- return -ENODEV;
- else
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_NCM);
+ if (prefer_mbim && intf->num_altsetting == 2) {
+ alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+ if (alt && cdc_ncm_comm_intf_is_mbim(alt) &&
+ !usb_set_interface(dev->udev,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ CDC_NCM_COMM_ALTSETTING_MBIM))
+ return CDC_NCM_DATA_ALTSETTING_MBIM;
}
-#endif
+ return CDC_NCM_DATA_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ /* MBIM backwards compatible function? */
+ cdc_ncm_select_altsetting(dev, intf);
+ if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+ return -ENODEV;
/* NCM data altsetting is always 1 */
ret = cdc_ncm_bind_common(dev, intf, 1);
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 3b8f9d4fc3f..cc25b70af33 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -127,6 +127,7 @@ struct cdc_ncm_ctx {
u16 connected;
};
+extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf);
extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign);
--
cgit v1.2.3-70-g09d2
From 65c10553552b487a71bf5e4676743435046fae6f Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Thu, 14 Mar 2013 20:52:30 +0900
Subject: kprobes: Make hash_64() as always inlined
Because hash_64() is called from the get_kprobe() inside
int3 handler, kernel causes int3 recursion and crashes if
kprobes user puts a probe on it.
Usually hash_64() is inlined into caller function, but in
some cases, it has instances by gcc's interprocedural
constant propagation.
This patch uses __always_inline instead of inline to
prevent gcc from doing such things.
Reported-by: Timo Juhani Lindfors <timo.lindfors@iki.fi>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130314115230.19690.39387.stgit@mhiramat-M0-7522
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
include/linux/hash.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
(limited to 'include')
diff --git a/include/linux/hash.h b/include/linux/hash.h
index 61c97ae22e0..f09a0ae4d85 100644
--- a/include/linux/hash.h
+++ b/include/linux/hash.h
@@ -15,6 +15,7 @@
*/
#include <asm/types.h>
+#include <linux/compiler.h>
/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
#define GOLDEN_RATIO_PRIME_32 0x9e370001UL
@@ -31,7 +32,7 @@
#error Wordsize not 32 or 64
#endif
-static inline u64 hash_64(u64 val, unsigned int bits)
+static __always_inline u64 hash_64(u64 val, unsigned int bits)
{
u64 hash = val;
--
cgit v1.2.3-70-g09d2
From f445f11eb2cc265dd47da5b2e864df46cd6e5a82 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@linaro.org>
Date: Thu, 14 Mar 2013 17:13:46 -0700
Subject: KVM: allow host header to be included even for !CONFIG_KVM
The new context tracking subsystem unconditionally includes kvm_host.h
headers for the guest enter/exit macros. This causes a compile
failure when KVM is not enabled.
Fix by adding an IS_ENABLED(CONFIG_KVM) check to kvm_host so it can
be included/compiled even when KVM is not enabled.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
include/linux/kvm_host.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
(limited to 'include')
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index cad77fe09d7..a9428635c9f 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1,6 +1,8 @@
#ifndef __KVM_HOST_H
#define __KVM_HOST_H
+#if IS_ENABLED(CONFIG_KVM)
+
/*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
@@ -1055,5 +1057,8 @@ static inline bool kvm_vcpu_eligible_for_directed_yield(struct kvm_vcpu *vcpu)
}
#endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */
+#else
+static inline void __guest_enter(void) { return; }
+static inline void __guest_exit(void) { return; }
+#endif /* IS_ENABLED(CONFIG_KVM) */
#endif
-
--
cgit v1.2.3-70-g09d2
From 6a15075eced2d780fa6c5d83682410f47f2e800b Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Mon, 18 Mar 2013 19:24:02 +0100
Subject: ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The issue fixed by this patch manifests only then using X11
with mxsfb driver. The X11 will display either shifted image
or otherwise distorted image on the LCD.
The problem is that the X11 tries to reconfigure the framebuffer
and along the way calls fb_ops.fb_set_par() with X11's desired
configuration values. The field of particular interest is
fb_info->var.sync which contains non-standard values if
configured by kernel. These are either FB_SYNC_DATA_ENABLE_HIGH_ACT,
FB_SYNC_DOTCLK_FAILING_ACT or both, depending on the platform
configuration. Both of these values are defined in the
include/linux/mxsfb.h file.
The driver interprets these values and configures the LCD controller
accordingly. Yet X11 only has access to the standard values for this
field defined in include/uapi/linux/fb.h and thus, unlike kernel,
omits these special values. This results in distorted image on the
LCD.
This patch moves these non-standard values into new field of the
mxsfb_platform_data structure so the driver can in turn check this
field instead of the video mode field for these specific portions.
Moreover, this patch prefixes these values with MXSFB_SYNC_ prefix
instead of FB_SYNC_ prefix to prevent confusion of subsequent users.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Linux ARM <linux-arm-kernel@lists.infradead.org>
Cc: Linux FBDEV <linux-fbdev@vger.kernel.org>
Cc: Lothar Waßmann <LW@karo-electronics.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-mxs/mach-mxs.c | 24 ++++++++++++------------
drivers/video/mxsfb.c | 7 +++++--
include/linux/mxsfb.h | 7 +++++--
3 files changed, 22 insertions(+), 16 deletions(-)
(limited to 'include')
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 3218f1f2c0e..e7b781d3788 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -41,8 +41,6 @@ static struct fb_videomode mx23evk_video_modes[] = {
.lower_margin = 4,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
@@ -59,8 +57,6 @@ static struct fb_videomode mx28evk_video_modes[] = {
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
},
};
@@ -77,7 +73,6 @@ static struct fb_videomode m28evk_video_modes[] = {
.lower_margin = 45,
.hsync_len = 1,
.vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
},
};
@@ -94,9 +89,7 @@ static struct fb_videomode apx4devkit_video_modes[] = {
.lower_margin = 13,
.hsync_len = 48,
.vsync_len = 3,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
@@ -113,9 +106,7 @@ static struct fb_videomode apf28dev_video_modes[] = {
.lower_margin = 0x15,
.hsync_len = 64,
.vsync_len = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
@@ -132,7 +123,6 @@ static struct fb_videomode cfa10049_video_modes[] = {
.lower_margin = 2,
.hsync_len = 15,
.vsync_len = 15,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
},
};
@@ -259,6 +249,8 @@ static void __init imx23_evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static inline void enable_clk_enet_out(void)
@@ -278,6 +270,8 @@ static void __init imx28_evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
@@ -297,6 +291,7 @@ static void __init m28evk_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init sc_sps1_init(void)
@@ -322,6 +317,8 @@ static void __init apx4devkit_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
@@ -407,6 +404,7 @@ static void __init cfa10049_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
mxsfb_pdata.default_bpp = 32;
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
}
static void __init cfa10037_init(void)
@@ -423,6 +421,8 @@ static void __init apf28_init(void)
mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
mxsfb_pdata.default_bpp = 16;
mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+ mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+ MXSFB_SYNC_DOTCLK_FAILING_ACT;
}
static void __init mxs_machine_init(void)
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 755556ca5b2..45169cbaba6 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -169,6 +169,7 @@ struct mxsfb_info {
unsigned dotclk_delay;
const struct mxsfb_devdata *devdata;
int mapped;
+ u32 sync;
};
#define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
@@ -456,9 +457,9 @@ static int mxsfb_set_par(struct fb_info *fb_info)
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
+ if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT)
+ if (host->sync & MXSFB_SYNC_DOTCLK_FAILING_ACT)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
writel(vdctrl0, host->base + LCDC_VDCTRL0);
@@ -861,6 +862,8 @@ static int mxsfb_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&fb_info->modelist);
+ host->sync = pdata->sync;
+
ret = mxsfb_init_fbinfo(host);
if (ret != 0)
goto error_init_fb;
diff --git a/include/linux/mxsfb.h b/include/linux/mxsfb.h
index f14943d5531..f80af867434 100644
--- a/include/linux/mxsfb.h
+++ b/include/linux/mxsfb.h
@@ -24,8 +24,8 @@
#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
-#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
+#define MXSFB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
struct mxsfb_platform_data {
struct fb_videomode *mode_list;
@@ -44,6 +44,9 @@ struct mxsfb_platform_data {
* allocated. If specified,fb_size must also be specified.
* fb_phys must be unused by Linux.
*/
+ u32 sync; /* sync mask, contains MXSFB specifics not
+ * carried in fb_info->var.sync
+ */
};
#endif /* __LINUX_MXSFB_H */
--
cgit v1.2.3-70-g09d2
From 0c12582fbcdea0cbb0dfd224e1c5f9a8428ffa18 Mon Sep 17 00:00:00 2001
From: Julian Anastasov <ja@ssi.bg>
Date: Sat, 9 Mar 2013 23:25:04 +0200
Subject: ipvs: add backup_only flag to avoid loops
Dmitry Akindinov is reporting for a problem where SYNs are looping
between the master and backup server when the backup server is used as
real server in DR mode and has IPVS rules to function as director.
Even when the backup function is enabled we continue to forward
traffic and schedule new connections when the current master is using
the backup server as real server. While this is not a problem for NAT,
for DR and TUN method the backup server can not determine if a request
comes from client or from director.
To avoid such loops add new sysctl flag backup_only. It can be needed
for DR/TUN setups that do not need backup and director function at the
same time. When the backup function is enabled we stop any forwarding
and pass the traffic to the local stack (real server mode). The flag
disables the director function when the backup function is enabled.
For setups that enable backup function for some virtual services and
director function for other virtual services there should be another
more complex solution to support DR/TUN mode, may be to assign
per-virtual service syncid value, so that we can differentiate the
requests.
Reported-by: Dmitry Akindinov <dimak@stalker.com>
Tested-by: German Myzovsky <lawyer@sipnet.ru>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
Documentation/networking/ipvs-sysctl.txt | 7 +++++++
include/net/ip_vs.h | 12 ++++++++++++
net/netfilter/ipvs/ip_vs_core.c | 12 ++++++++----
net/netfilter/ipvs/ip_vs_ctl.c | 7 +++++++
4 files changed, 34 insertions(+), 4 deletions(-)
(limited to 'include')
diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
index f2a2488f1bf..9573d0c48c6 100644
--- a/Documentation/networking/ipvs-sysctl.txt
+++ b/Documentation/networking/ipvs-sysctl.txt
@@ -15,6 +15,13 @@ amemthresh - INTEGER
enabled and the variable is automatically set to 2, otherwise
the strategy is disabled and the variable is set to 1.
+backup_only - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If set, disable the director function while the server is
+ in backup mode to avoid packet loops for DR/TUN methods.
+
conntrack - BOOLEAN
0 - disabled (default)
not 0 - enabled
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 68c69d54d39..fce8e6b66d5 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -976,6 +976,7 @@ struct netns_ipvs {
int sysctl_sync_retries;
int sysctl_nat_icmp_send;
int sysctl_pmtu_disc;
+ int sysctl_backup_only;
/* ip_vs_lblc */
int sysctl_lblc_expiration;
@@ -1067,6 +1068,12 @@ static inline int sysctl_pmtu_disc(struct netns_ipvs *ipvs)
return ipvs->sysctl_pmtu_disc;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return ipvs->sync_state & IP_VS_STATE_BACKUP &&
+ ipvs->sysctl_backup_only;
+}
+
#else
static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
@@ -1114,6 +1121,11 @@ static inline int sysctl_pmtu_disc(struct netns_ipvs *ipvs)
return 1;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return 0;
+}
+
#endif
/*
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 47edf5a40a5..18b4bc55fa3 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1577,7 +1577,8 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
}
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
ip_vs_fill_iph_skb(af, skb, &iph);
@@ -1654,7 +1655,6 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
}
IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
- ipvs = net_ipvs(net);
/* Check the server status */
if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
/* the destination server is not available */
@@ -1815,13 +1815,15 @@ ip_vs_forward_icmp(unsigned int hooknum, struct sk_buff *skb,
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
if (ip_hdr(skb)->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp(skb, &r, hooknum);
@@ -1835,6 +1837,7 @@ ip_vs_forward_icmp_v6(unsigned int hooknum, struct sk_buff *skb,
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
struct ip_vs_iphdr iphdr;
ip_vs_fill_iph_skb(AF_INET6, skb, &iphdr);
@@ -1843,7 +1846,8 @@ ip_vs_forward_icmp_v6(unsigned int hooknum, struct sk_buff *skb,
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp_v6(skb, &r, hooknum, &iphdr);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index c68198bf912..9e2d1cccd1e 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1808,6 +1808,12 @@ static struct ctl_table vs_vars[] = {
.mode = 0644,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "backup_only",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
#ifdef CONFIG_IP_VS_DEBUG
{
.procname = "debug_level",
@@ -3741,6 +3747,7 @@ static int __net_init ip_vs_control_net_init_sysctl(struct net *net)
tbl[idx++].data = &ipvs->sysctl_nat_icmp_send;
ipvs->sysctl_pmtu_disc = 1;
tbl[idx++].data = &ipvs->sysctl_pmtu_disc;
+ tbl[idx++].data = &ipvs->sysctl_backup_only;
ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl);
--
cgit v1.2.3-70-g09d2
From 5a3da1fe9561828d0ca7eca664b16ec2b9bf0055 Mon Sep 17 00:00:00 2001
From: Hannes Frederic Sowa <hannes@stressinduktion.org>
Date: Fri, 15 Mar 2013 11:32:30 +0000
Subject: inet: limit length of fragment queue hash table bucket lists
This patch introduces a constant limit of the fragment queue hash
table bucket list lengths. Currently the limit 128 is choosen somewhat
arbitrary and just ensures that we can fill up the fragment cache with
empty packets up to the default ip_frag_high_thresh limits. It should
just protect from list iteration eating considerable amounts of cpu.
If we reach the maximum length in one hash bucket a warning is printed.
This is implemented on the caller side of inet_frag_find to distinguish
between the different users of inet_fragment.c.
I dropped the out of memory warning in the ipv4 fragment lookup path,
because we already get a warning by the slab allocator.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/net/inet_frag.h | 9 +++++++++
net/ipv4/inet_fragment.c | 20 +++++++++++++++++++-
net/ipv4/ip_fragment.c | 11 ++++-------
net/ipv6/netfilter/nf_conntrack_reasm.c | 12 ++++++------
net/ipv6/reassembly.c | 8 ++++++--
5 files changed, 44 insertions(+), 16 deletions(-)
(limited to 'include')
diff --git a/include/net/inet_frag.h b/include/net/inet_frag.h
index 76c3fe5ecc2..0a1dcc2fa2f 100644
--- a/include/net/inet_frag.h
+++ b/include/net/inet_frag.h
@@ -43,6 +43,13 @@ struct inet_frag_queue {
#define INETFRAGS_HASHSZ 64
+/* averaged:
+ * max_depth = default ipfrag_high_thresh / INETFRAGS_HASHSZ /
+ * rounded up (SKB_TRUELEN(0) + sizeof(struct ipq or
+ * struct frag_queue))
+ */
+#define INETFRAGS_MAXDEPTH 128
+
struct inet_frags {
struct hlist_head hash[INETFRAGS_HASHSZ];
/* This rwlock is a global lock (seperate per IPv4, IPv6 and
@@ -76,6 +83,8 @@ int inet_frag_evictor(struct netns_frags *nf, struct inet_frags *f, bool force);
struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
struct inet_frags *f, void *key, unsigned int hash)
__releases(&f->lock);
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix);
static inline void inet_frag_put(struct inet_frag_queue *q, struct inet_frags *f)
{
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 245ae078a07..f4fd23de9b1 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -21,6 +21,7 @@
#include <linux/rtnetlink.h>
#include <linux/slab.h>
+#include <net/sock.h>
#include <net/inet_frag.h>
static void inet_frag_secret_rebuild(unsigned long dummy)
@@ -277,6 +278,7 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
__releases(&f->lock)
{
struct inet_frag_queue *q;
+ int depth = 0;
hlist_for_each_entry(q, &f->hash[hash], list) {
if (q->net == nf && f->match(q, key)) {
@@ -284,9 +286,25 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf,
read_unlock(&f->lock);
return q;
}
+ depth++;
}
read_unlock(&f->lock);
- return inet_frag_create(nf, f, key);
+ if (depth <= INETFRAGS_MAXDEPTH)
+ return inet_frag_create(nf, f, key);
+ else
+ return ERR_PTR(-ENOBUFS);
}
EXPORT_SYMBOL(inet_frag_find);
+
+void inet_frag_maybe_warn_overflow(struct inet_frag_queue *q,
+ const char *prefix)
+{
+ static const char msg[] = "inet_frag_find: Fragment hash bucket"
+ " list length grew over limit " __stringify(INETFRAGS_MAXDEPTH)
+ ". Dropping fragment.\n";
+
+ if (PTR_ERR(q) == -ENOBUFS)
+ LIMIT_NETDEBUG(KERN_WARNING "%s%s", prefix, msg);
+}
+EXPORT_SYMBOL(inet_frag_maybe_warn_overflow);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index b6d30acb600..a6445b843ef 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -292,14 +292,11 @@ static inline struct ipq *ip_find(struct net *net, struct iphdr *iph, u32 user)
hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol);
q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash);
- if (q == NULL)
- goto out_nomem;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct ipq, q);
-
-out_nomem:
- LIMIT_NETDEBUG(KERN_ERR pr_fmt("ip_frag_create: no memory left !\n"));
- return NULL;
}
/* Is the fragment too far ahead to be part of ipq? */
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 54087e96d7b..6700069949d 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -14,6 +14,8 @@
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "IPv6-nf: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -180,13 +182,11 @@ static inline struct frag_queue *fq_find(struct net *net, __be32 id,
q = inet_frag_find(&net->nf_frag.frags, &nf_frags, &arg, hash);
local_bh_enable();
- if (q == NULL)
- goto oom;
-
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
+ return NULL;
+ }
return container_of(q, struct frag_queue, q);
-
-oom:
- return NULL;
}
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 3c6a77290c6..196ab9347ad 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -26,6 +26,9 @@
* YOSHIFUJI,H. @USAGI Always remove fragment header to
* calculate ICV correctly.
*/
+
+#define pr_fmt(fmt) "IPv6: " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -185,9 +188,10 @@ fq_find(struct net *net, __be32 id, const struct in6_addr *src, const struct in6
hash = inet6_hash_frag(id, src, dst, ip6_frags.rnd);
q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash);
- if (q == NULL)
+ if (IS_ERR_OR_NULL(q)) {
+ inet_frag_maybe_warn_overflow(q, pr_fmt());
return NULL;
-
+ }
return container_of(q, struct frag_queue, q);
}
--
cgit v1.2.3-70-g09d2
From 7fa4cd1a78ea5af688ffce45553abbee9d7afd84 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Wed, 20 Mar 2013 10:35:44 -0300
Subject: usb: ulpi: Define a *otg_ulpi_create no-op
Building a kernel for imx_v4_v5_defconfig with CONFIG_USB_ULPI disabled, results
in the following error:
arch/arm/mach-imx/built-in.o: In function 'pca100_init':
platform-mx2-emma.c:(.init.text+0x6788): undefined reference to 'otg_ulpi_create'
platform-mx2-emma.c:(.init.text+0x682c): undefined reference to 'mxc_ulpi_access_ops'
Fix this by providing a no-op definition of *otg_ulpi_create for the case when
CONFIG_USB_ULPI is not defined.
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
include/linux/usb/ulpi.h | 8 ++++++++
1 file changed, 8 insertions(+)
(limited to 'include')
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 6f033a415ec..5c295c26ad3 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -181,8 +181,16 @@
/*-------------------------------------------------------------------------*/
+#if IS_ENABLED(CONFIG_USB_ULPI)
struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
unsigned int flags);
+#else
+static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags)
+{
+ return NULL;
+}
+#endif
#ifdef CONFIG_USB_ULPI_VIEWPORT
/* access ops for controllers with a viewport register */
--
cgit v1.2.3-70-g09d2
From 44046a593eb770dbecdabf1c82bcd252f2a8337b Mon Sep 17 00:00:00 2001
From: Tom Parkin <tparkin@katalix.com>
Date: Tue, 19 Mar 2013 06:11:12 +0000
Subject: udp: add encap_destroy callback
Users of udp encapsulation currently have an encap_rcv callback which they can
use to hook into the udp receive path.
In situations where a encapsulation user allocates resources associated with a
udp encap socket, it may be convenient to be able to also hook the proto
.destroy operation. For example, if an encap user holds a reference to the
udp socket, the destroy hook might be used to relinquish this reference.
This patch adds a socket destroy hook into udp, which is set and enabled
in the same way as the existing encap_rcv hook.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/linux/udp.h | 1 +
net/ipv4/udp.c | 7 +++++++
net/ipv6/udp.c | 8 ++++++++
3 files changed, 16 insertions(+)
(limited to 'include')
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 9d81de123c9..42278bbf7a8 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -68,6 +68,7 @@ struct udp_sock {
* For encapsulation sockets.
*/
int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+ void (*encap_destroy)(struct sock *sk);
};
static inline struct udp_sock *udp_sk(const struct sock *sk)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 265c42cf963..0a073a26372 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1762,9 +1762,16 @@ int udp_rcv(struct sk_buff *skb)
void udp_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
bool slow = lock_sock_fast(sk);
udp_flush_pending_frames(sk);
unlock_sock_fast(sk, slow);
+ if (static_key_false(&udp_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
}
/*
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 599e1ba6d1c..d8e5e852fc7 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1285,10 +1285,18 @@ do_confirm:
void udpv6_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
lock_sock(sk);
udp_v6_flush_pending_frames(sk);
release_sock(sk);
+ if (static_key_false(&udpv6_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
+
inet6_destroy_sock(sk);
}
--
cgit v1.2.3-70-g09d2
From 8ed781668dd49b608f1e67a22e3b445fd0c2cd6f Mon Sep 17 00:00:00 2001
From: Daniel Borkmann <dborkman@redhat.com>
Date: Tue, 19 Mar 2013 06:39:29 +0000
Subject: flow_keys: include thoff into flow_keys for later usage
In skb_flow_dissect(), we perform a dissection of a skbuff. Since we're
doing the work here anyway, also store thoff for a later usage, e.g. in
the BPF filter.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/net/flow_keys.h | 1 +
net/core/flow_dissector.c | 2 ++
2 files changed, 3 insertions(+)
(limited to 'include')
diff --git a/include/net/flow_keys.h b/include/net/flow_keys.h
index 80461c1ae9e..bb8271d487b 100644
--- a/include/net/flow_keys.h
+++ b/include/net/flow_keys.h
@@ -9,6 +9,7 @@ struct flow_keys {
__be32 ports;
__be16 port16[2];
};
+ u16 thoff;
u8 ip_proto;
};
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 9d4c7201400..e187bf06d67 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -140,6 +140,8 @@ ipv6:
flow->ports = *ports;
}
+ flow->thoff = (u16) nhoff;
+
return true;
}
EXPORT_SYMBOL(skb_flow_dissect);
--
cgit v1.2.3-70-g09d2
From 73214f5d9f33b79918b1f7babddd5c8af28dd23d Mon Sep 17 00:00:00 2001
From: Masatake YAMATO <yamato@redhat.com>
Date: Tue, 19 Mar 2013 01:47:28 +0000
Subject: thermal: shorten too long mcast group name
The original name is too long.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/linux/thermal.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'include')
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index f0bd7f90a90..e3c0ae9bb1f 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -44,7 +44,7 @@
/* Adding event notification support elements */
#define THERMAL_GENL_FAMILY_NAME "thermal_event"
#define THERMAL_GENL_VERSION 0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group"
+#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_grp"
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
--
cgit v1.2.3-70-g09d2
From ae5fc98728c8bbbd6d7cab0b9781671fc4419c1b Mon Sep 17 00:00:00 2001
From: Andrey Vagin <avagin@openvz.org>
Date: Thu, 21 Mar 2013 20:33:46 +0400
Subject: net: fix *_DIAG_MAX constants
Follow the common pattern and define *_DIAG_MAX like:
[...]
__XXX_DIAG_MAX,
};
Because everyone is used to do:
struct nlattr *attrs[XXX_DIAG_MAX+1];
nla_parse([...], XXX_DIAG_MAX, [...]
Reported-by: Thomas Graf <tgraf@suug.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/uapi/linux/packet_diag.h | 4 +++-
include/uapi/linux/unix_diag.h | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)
(limited to 'include')
diff --git a/include/uapi/linux/packet_diag.h b/include/uapi/linux/packet_diag.h
index 93f5fa94a43..afafd703ad9 100644
--- a/include/uapi/linux/packet_diag.h
+++ b/include/uapi/linux/packet_diag.h
@@ -33,9 +33,11 @@ enum {
PACKET_DIAG_TX_RING,
PACKET_DIAG_FANOUT,
- PACKET_DIAG_MAX,
+ __PACKET_DIAG_MAX,
};
+#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1)
+
struct packet_diag_info {
__u32 pdi_index;
__u32 pdi_version;
diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h
index b8a24941db2..b9e2a6a7446 100644
--- a/include/uapi/linux/unix_diag.h
+++ b/include/uapi/linux/unix_diag.h
@@ -39,9 +39,11 @@ enum {
UNIX_DIAG_MEMINFO,
UNIX_DIAG_SHUTDOWN,
- UNIX_DIAG_MAX,
+ __UNIX_DIAG_MAX,
};
+#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1)
+
struct unix_diag_vfs {
__u32 udiag_vfs_ino;
__u32 udiag_vfs_dev;
--
cgit v1.2.3-70-g09d2
From e5b33dc9d16053c2ae4c2c669cf008829530364b Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@gmail.com>
Date: Tue, 19 Mar 2013 09:21:10 +0100
Subject: USB: serial: add modem-status-change wait queue
Add modem-status-change wait queue to struct usb_serial_port that
subdrivers can use to implement TIOCMIWAIT.
Currently subdrivers use a private wait queue which may have been
released when waking up after device disconnected.
Note that we're adding a new wait queue rather than reusing the tty-port
one as we do not want to get woken up at hangup (yet).
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/usb/serial.h | 2 ++
1 file changed, 2 insertions(+)
(limited to 'include')
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index ef9be7e1e19..1819b59aab2 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -66,6 +66,7 @@
* port.
* @flags: usb serial port flags
* @write_wait: a wait_queue_head_t used by the port.
+ * @delta_msr_wait: modem-status-change wait queue
* @work: work queue entry for the line discipline waking up.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
@@ -112,6 +113,7 @@ struct usb_serial_port {
unsigned long flags;
wait_queue_head_t write_wait;
+ wait_queue_head_t delta_msr_wait;
struct work_struct work;
char throttled;
char throttle_req;
--
cgit v1.2.3-70-g09d2
From 09a6e1f4ad32243989b30485f78985c0923284cd Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Fri, 22 Mar 2013 08:08:06 -0300
Subject: Revert "KVM: allow host header to be included even for !CONFIG_KVM"
This reverts commit f445f11eb2cc265dd47da5b2e864df46cd6e5a82 as
it breaks PPC with CONFIG_KVM=n.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
include/linux/kvm_host.h | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
(limited to 'include')
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index a9428635c9f..cad77fe09d7 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1,8 +1,6 @@
#ifndef __KVM_HOST_H
#define __KVM_HOST_H
-#if IS_ENABLED(CONFIG_KVM)
-
/*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
@@ -1057,8 +1055,5 @@ static inline bool kvm_vcpu_eligible_for_directed_yield(struct kvm_vcpu *vcpu)
}
#endif /* CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT */
-#else
-static inline void __guest_enter(void) { return; }
-static inline void __guest_exit(void) { return; }
-#endif /* IS_ENABLED(CONFIG_KVM) */
#endif
+
--
cgit v1.2.3-70-g09d2
From 909b3fdb0dd4f3db07b2d75425a00a2adb551383 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@suse.com>
Date: Tue, 12 Mar 2013 15:06:23 +0000
Subject: xen-pciback: notify hypervisor about devices intended to be assigned
to guests
For MSI-X capable devices the hypervisor wants to write protect the
MSI-X table and PBA, yet it can't assume that resources have been
assigned to their final values at device enumeration time. Thus have
pciback do that notification, as having the device controlled by it is
a prerequisite to assigning the device to guests anyway.
This is the kernel part of hypervisor side commit 4245d33 ("x86/MSI:
add mechanism to fully protect MSI-X table from PV guest accesses") on
the master branch of git://xenbits.xen.org/xen.git.
CC: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
arch/x86/include/asm/xen/hypercall.h | 4 +--
drivers/xen/fallback.c | 3 +-
drivers/xen/xen-pciback/pci_stub.c | 59 +++++++++++++++++++++++++++---------
include/xen/interface/physdev.h | 6 ++++
4 files changed, 54 insertions(+), 18 deletions(-)
(limited to 'include')
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index c20d1ce62dc..e709884d0ef 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -382,14 +382,14 @@ HYPERVISOR_console_io(int cmd, int count, char *str)
return _hypercall3(int, console_io, cmd, count, str);
}
-extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+extern int __must_check xen_physdev_op_compat(int, void *);
static inline int
HYPERVISOR_physdev_op(int cmd, void *arg)
{
int rc = _hypercall2(int, physdev_op, cmd, arg);
if (unlikely(rc == -ENOSYS))
- rc = HYPERVISOR_physdev_op_compat(cmd, arg);
+ rc = xen_physdev_op_compat(cmd, arg);
return rc;
}
diff --git a/drivers/xen/fallback.c b/drivers/xen/fallback.c
index 0ef7c4d40f8..b04fb64c5a9 100644
--- a/drivers/xen/fallback.c
+++ b/drivers/xen/fallback.c
@@ -44,7 +44,7 @@ int xen_event_channel_op_compat(int cmd, void *arg)
}
EXPORT_SYMBOL_GPL(xen_event_channel_op_compat);
-int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
+int xen_physdev_op_compat(int cmd, void *arg)
{
struct physdev_op op;
int rc;
@@ -78,3 +78,4 @@ int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
return rc;
}
+EXPORT_SYMBOL_GPL(xen_physdev_op_compat);
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 9204126f156..a2278ba7fb2 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -17,6 +17,7 @@
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypervisor.h>
+#include <xen/interface/physdev.h>
#include "pciback.h"
#include "conf_space.h"
#include "conf_space_quirks.h"
@@ -85,37 +86,52 @@ static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
static void pcistub_device_release(struct kref *kref)
{
struct pcistub_device *psdev;
+ struct pci_dev *dev;
struct xen_pcibk_dev_data *dev_data;
psdev = container_of(kref, struct pcistub_device, kref);
- dev_data = pci_get_drvdata(psdev->dev);
+ dev = psdev->dev;
+ dev_data = pci_get_drvdata(dev);
- dev_dbg(&psdev->dev->dev, "pcistub_device_release\n");
+ dev_dbg(&dev->dev, "pcistub_device_release\n");
- xen_unregister_device_domain_owner(psdev->dev);
+ xen_unregister_device_domain_owner(dev);
/* Call the reset function which does not take lock as this
* is called from "unbind" which takes a device_lock mutex.
*/
- __pci_reset_function_locked(psdev->dev);
- if (pci_load_and_free_saved_state(psdev->dev,
- &dev_data->pci_saved_state)) {
- dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n");
- } else
- pci_restore_state(psdev->dev);
+ __pci_reset_function_locked(dev);
+ if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
+ dev_dbg(&dev->dev, "Could not reload PCI state\n");
+ else
+ pci_restore_state(dev);
+
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+ int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix,
+ &ppdev);
+
+ if (err)
+ dev_warn(&dev->dev, "MSI-X release failed (%d)\n",
+ err);
+ }
/* Disable the device */
- xen_pcibk_reset_device(psdev->dev);
+ xen_pcibk_reset_device(dev);
kfree(dev_data);
- pci_set_drvdata(psdev->dev, NULL);
+ pci_set_drvdata(dev, NULL);
/* Clean-up the device */
- xen_pcibk_config_free_dyn_fields(psdev->dev);
- xen_pcibk_config_free_dev(psdev->dev);
+ xen_pcibk_config_free_dyn_fields(dev);
+ xen_pcibk_config_free_dev(dev);
- psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
- pci_dev_put(psdev->dev);
+ dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
+ pci_dev_put(dev);
kfree(psdev);
}
@@ -355,6 +371,19 @@ static int pcistub_init_device(struct pci_dev *dev)
if (err)
goto config_release;
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+
+ err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev);
+ if (err)
+ dev_err(&dev->dev, "MSI-X preparation failed (%d)\n",
+ err);
+ }
+
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
index 1844d31f455..7000bb1f6e9 100644
--- a/include/xen/interface/physdev.h
+++ b/include/xen/interface/physdev.h
@@ -251,6 +251,12 @@ struct physdev_pci_device_add {
#define PHYSDEVOP_pci_device_remove 26
#define PHYSDEVOP_restore_msi_ext 27
+/*
+ * Dom0 should use these two to announce MMIO resources assigned to
+ * MSI-X capable devices won't (prepare) or may (release) change.
+ */
+#define PHYSDEVOP_prepare_msix 30
+#define PHYSDEVOP_release_msix 31
struct physdev_pci_device {
/* IN */
uint16_t seg;
--
cgit v1.2.3-70-g09d2
From fe8d52614bd419cedef85ef55850fd090373f481 Mon Sep 17 00:00:00 2001
From: James Hogan <james.hogan@imgtec.com>
Date: Fri, 22 Mar 2013 15:04:37 -0700
Subject: irq_work.h: fix warning when CONFIG_IRQ_WORK=n
A randconfig caught repeated compiler warnings when CONFIG_IRQ_WORK=n
due to the definition of a non-inline static function in
<linux/irq_work.h>:
include/linux/irq_work.h +40 : warning: 'irq_work_needs_cpu' defined but not used
Make it inline to supress the warning. This is caused commit
00b42959106a ("irq_work: Don't stop the tick with pending works") merged
in v3.9-rc1.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
include/linux/irq_work.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'include')
diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h
index f5dbce50466..66017028dcb 100644
--- a/include/linux/irq_work.h
+++ b/include/linux/irq_work.h
@@ -37,7 +37,7 @@ void irq_work_sync(struct irq_work *work);
#ifdef CONFIG_IRQ_WORK
bool irq_work_needs_cpu(void);
#else
-static bool irq_work_needs_cpu(void) { return false; }
+static inline bool irq_work_needs_cpu(void) { return false; }
#endif
#endif /* _LINUX_IRQ_WORK_H */
--
cgit v1.2.3-70-g09d2
From dc72c32e1fd872a9a4fdfe645283c9dcd68e556d Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Fri, 22 Mar 2013 15:04:39 -0700
Subject: printk: Provide a wake_up_klogd() off-case
wake_up_klogd() is useless when CONFIG_PRINTK=n because neither printk()
nor printk_sched() are in use and there are actually no waiter on
log_wait waitqueue. It should be a stub in this case for users like
bust_spinlocks().
Otherwise this results in this warning when CONFIG_PRINTK=n and
CONFIG_IRQ_WORK=n:
kernel/built-in.o In function `wake_up_klogd':
(.text.wake_up_klogd+0xb4): undefined reference to `irq_work_queue'
To fix this, provide an off-case for wake_up_klogd() when
CONFIG_PRINTK=n.
There is much more from console_unlock() and other console related code
in printk.c that should be moved under CONFIG_PRINTK. But for now,
focus on a minimal fix as we passed the merged window already.
[akpm@linux-foundation.org: include printk.h in bust_spinlocks.c]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: James Hogan <james.hogan@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
include/linux/kernel.h | 1 -
include/linux/printk.h | 6 ++++
kernel/printk.c | 80 ++++++++++++++++++++++++--------------------------
lib/bust_spinlocks.c | 3 +-
4 files changed, 46 insertions(+), 44 deletions(-)
(limited to 'include')
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 80d36874689..79fdd80a42d 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -390,7 +390,6 @@ extern struct pid *session_of_pgrp(struct pid *pgrp);
unsigned long int_sqrt(unsigned long);
extern void bust_spinlocks(int yes);
-extern void wake_up_klogd(void);
extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern int panic_on_oops;
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 1249a54d17e..822171fcb1c 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -134,6 +134,8 @@ extern int printk_delay_msec;
extern int dmesg_restrict;
extern int kptr_restrict;
+extern void wake_up_klogd(void);
+
void log_buf_kexec_setup(void);
void __init setup_log_buf(int early);
#else
@@ -162,6 +164,10 @@ static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
return false;
}
+static inline void wake_up_klogd(void)
+{
+}
+
static inline void log_buf_kexec_setup(void)
{
}
diff --git a/kernel/printk.c b/kernel/printk.c
index 0b31715f335..abbdd9e2ac8 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -63,8 +63,6 @@ void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...)
#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */
#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */
-DECLARE_WAIT_QUEUE_HEAD(log_wait);
-
int console_printk[4] = {
DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */
DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */
@@ -224,6 +222,7 @@ struct log {
static DEFINE_RAW_SPINLOCK(logbuf_lock);
#ifdef CONFIG_PRINTK
+DECLARE_WAIT_QUEUE_HEAD(log_wait);
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
@@ -1957,45 +1956,6 @@ int is_console_locked(void)
return console_locked;
}
-/*
- * Delayed printk version, for scheduler-internal messages:
- */
-#define PRINTK_BUF_SIZE 512
-
-#define PRINTK_PENDING_WAKEUP 0x01
-#define PRINTK_PENDING_SCHED 0x02
-
-static DEFINE_PER_CPU(int, printk_pending);
-static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
-
-static void wake_up_klogd_work_func(struct irq_work *irq_work)
-{
- int pending = __this_cpu_xchg(printk_pending, 0);
-
- if (pending & PRINTK_PENDING_SCHED) {
- char *buf = __get_cpu_var(printk_sched_buf);
- printk(KERN_WARNING "[sched_delayed] %s", buf);
- }
-
- if (pending & PRINTK_PENDING_WAKEUP)
- wake_up_interruptible(&log_wait);
-}
-
-static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
- .func = wake_up_klogd_work_func,
- .flags = IRQ_WORK_LAZY,
-};
-
-void wake_up_klogd(void)
-{
- preempt_disable();
- if (waitqueue_active(&log_wait)) {
- this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
- irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
- }
- preempt_enable();
-}
-
static void console_cont_flush(char *text, size_t size)
{
unsigned long flags;
@@ -2458,6 +2418,44 @@ static int __init printk_late_init(void)
late_initcall(printk_late_init);
#if defined CONFIG_PRINTK
+/*
+ * Delayed printk version, for scheduler-internal messages:
+ */
+#define PRINTK_BUF_SIZE 512
+
+#define PRINTK_PENDING_WAKEUP 0x01
+#define PRINTK_PENDING_SCHED 0x02
+
+static DEFINE_PER_CPU(int, printk_pending);
+static DEFINE_PER_CPU(char [PRINTK_BUF_SIZE], printk_sched_buf);
+
+static void wake_up_klogd_work_func(struct irq_work *irq_work)
+{
+ int pending = __this_cpu_xchg(printk_pending, 0);
+
+ if (pending & PRINTK_PENDING_SCHED) {
+ char *buf = __get_cpu_var(printk_sched_buf);
+ printk(KERN_WARNING "[sched_delayed] %s", buf);
+ }
+
+ if (pending & PRINTK_PENDING_WAKEUP)
+ wake_up_interruptible(&log_wait);
+}
+
+static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = {
+ .func = wake_up_klogd_work_func,
+ .flags = IRQ_WORK_LAZY,
+};
+
+void wake_up_klogd(void)
+{
+ preempt_disable();
+ if (waitqueue_active(&log_wait)) {
+ this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP);
+ irq_work_queue(&__get_cpu_var(wake_up_klogd_work));
+ }
+ preempt_enable();
+}
int printk_sched(const char *fmt, ...)
{
diff --git a/lib/bust_spinlocks.c b/lib/bust_spinlocks.c
index 9681d54b95d..f8e0e536739 100644
--- a/lib/bust_spinlocks.c
+++ b/lib/bust_spinlocks.c
@@ -8,6 +8,7 @@
*/
#include <linux/kernel.h>
+#include <linux/printk.h>
#include <linux/spinlock.h>
#include <linux/tty.h>
#include <linux/wait.h>
@@ -28,5 +29,3 @@ void __attribute__((weak)) bust_spinlocks(int yes)
wake_up_klogd();
}
}
-
-
--
cgit v1.2.3-70-g09d2
From f9228b204f789493117e458d2fefae937edb7272 Mon Sep 17 00:00:00 2001
From: Russ Anderson <rja@sgi.com>
Date: Fri, 22 Mar 2013 15:04:43 -0700
Subject: mm: zone_end_pfn is too small
Booting with 32 TBytes memory hits BUG at mm/page_alloc.c:552! (output
below).
The key hint is "page 4294967296 outside zone".
4294967296 = 0x100000000 (bit 32 is set).
The problem is in include/linux/mmzone.h:
530 static inline unsigned zone_end_pfn(const struct zone *zone)
531 {
532 return zone->zone_start_pfn + zone->spanned_pages;
533 }
zone_end_pfn is "unsigned" (32 bits). Changing it to "unsigned long"
(64 bits) fixes the problem.
zone_end_pfn() was added recently in commit 108bcc96ef70 ("mm: add & use
zone_end_pfn() and zone_spans_pfn()")
Output from the failure.
No AGP bridge found
page 4294967296 outside zone [ 4294967296 - 4327469056 ]
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:552!
invalid opcode: 0000 [#1] SMP
Modules linked in:
CPU 0
Pid: 0, comm: swapper Not tainted 3.9.0-rc2.dtp+ #10
RIP: free_one_page+0x382/0x430
Process swapper (pid: 0, threadinfo ffffffff81942000, task ffffffff81955420)
Call Trace:
__free_pages_ok+0x96/0xb0
__free_pages+0x25/0x50
__free_pages_bootmem+0x8a/0x8c
__free_memory_core+0xea/0x131
free_low_memory_core_early+0x4a/0x98
free_all_bootmem+0x45/0x47
mem_init+0x7b/0x14c
start_kernel+0x216/0x433
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x144/0x153
Code: 89 f1 ba 01 00 00 00 31 f6 d3 e2 4c 89 ef e8 66 a4 01 00 e9 2c fe ff ff 0f 0b eb fe 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 eb f3 <0f> 0b eb fe 0f 0b 0f 1f 84 00 00 00 00 00 eb f6 0f 0b eb fe 49
Signed-off-by: Russ Anderson <rja@sgi.com>
Reported-by: George Beshers <gbeshers@sgi.com>
Acked-by: Hedi Berriche <hedi@sgi.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
include/linux/mmzone.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'include')
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index ede274957e0..c74092eebf5 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -527,7 +527,7 @@ static inline int zone_is_oom_locked(const struct zone *zone)
return test_bit(ZONE_OOM_LOCKED, &zone->flags);
}
-static inline unsigned zone_end_pfn(const struct zone *zone)
+static inline unsigned long zone_end_pfn(const struct zone *zone)
{
return zone->zone_start_pfn + zone->spanned_pages;
}
--
cgit v1.2.3-70-g09d2
From 3f5eb14135ba9d97ba4b8514fc7ef5e0dac2abf4 Mon Sep 17 00:00:00 2001
From: Lan Tianyu <tianyu.lan@intel.com>
Date: Tue, 19 Mar 2013 16:48:12 +0800
Subject: usb: add find_raw_port_number callback to struct hc_driver()
xhci driver divides the root hub into two logical hubs which work
respectively for usb 2.0 and usb 3.0 devices. They are independent
devices in the usb core. But in the ACPI table, it's one device node
and all usb2.0 and usb3.0 ports are under it. Binding usb port with
its acpi node needs the raw port number which is reflected in the xhci
extended capabilities table. This patch is to add find_raw_port_number
callback to struct hc_driver(), fill it with xhci_find_raw_port_number()
which will return raw port number and add a wrap usb_hcd_find_raw_port_number().
Otherwise, refactor xhci_find_real_port_number(). Using
xhci_find_raw_port_number() to get real index in the HW port status
registers instead of scanning through the xHCI roothub port array.
This can help to speed up.
All addresses in xhci->usb2_ports and xhci->usb3_ports array are
kown good ports and don't include following bad ports in the extended
capabilities talbe.
(1) root port that doesn't have an entry
(2) root port with unknown speed
(3) root port that is listed twice and with different speeds.
So xhci_find_raw_port_number() will only return port num of good ones
and never touch bad ports above.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
---
drivers/usb/core/hcd.c | 8 ++++++++
drivers/usb/host/xhci-mem.c | 36 ++++++++----------------------------
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci.c | 22 ++++++++++++++++++++++
drivers/usb/host/xhci.h | 1 +
include/linux/usb/hcd.h | 2 ++
6 files changed, 42 insertions(+), 28 deletions(-)
(limited to 'include')
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 99b34a30354..f9ec44cbb82 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2412,6 +2412,14 @@ int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
}
EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ if (!hcd->driver->find_raw_port_number)
+ return port1;
+
+ return hcd->driver->find_raw_port_number(hcd, port1);
+}
+
static int usb_hcd_request_irqs(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 35616ffbe3a..6dc238c592b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1022,44 +1022,24 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
* is attached to (or the roothub port its ancestor hub is attached to). All we
* know is the index of that port under either the USB 2.0 or the USB 3.0
* roothub, but that doesn't give us the real index into the HW port status
- * registers. Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed. Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
*/
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct usb_device *top_dev;
- unsigned int num_similar_speed_ports;
- unsigned int faked_port_num;
- int i;
+ struct usb_hcd *hcd;
+
+ if (udev->speed == USB_SPEED_SUPER)
+ hcd = xhci->shared_hcd;
+ else
+ hcd = xhci->main_hcd;
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- faked_port_num = top_dev->portnum;
- for (i = 0, num_similar_speed_ports = 0;
- i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
- u8 port_speed = xhci->port_array[i];
-
- /*
- * Skip ports that don't have known speeds, or have duplicate
- * Extended Capabilities port speed entries.
- */
- if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
- continue;
- /*
- * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
- * 1.1 ports are under the USB 2.0 hub. If the port speed
- * matches the device speed, it's a similar speed port.
- */
- if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
- num_similar_speed_ports++;
- if (num_similar_speed_ports == faked_port_num)
- /* Roothub ports are numbered from 1 to N */
- return i+1;
- }
- return 0;
+ return xhci_find_raw_port_number(hcd, top_dev->portnum);
}
/* Setup an xHCI virtual device for a Set Address command */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index af259e0ec17..1a30c380043 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -313,6 +313,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
.set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
.enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
.disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
+ .find_raw_port_number = xhci_find_raw_port_number,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 849470b1883..53b8f89a0b1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3779,6 +3779,28 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
return 0;
}
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ __le32 __iomem *base_addr = &xhci->op_regs->port_status_base;
+ __le32 __iomem *addr;
+ int raw_port;
+
+ if (hcd->speed != HCD_USB3)
+ addr = xhci->usb2_ports[port1 - 1];
+ else
+ addr = xhci->usb3_ports[port1 - 1];
+
+ raw_port = (addr - base_addr)/NUM_PORT_REGS + 1;
+ return raw_port;
+}
+
#ifdef CONFIG_USB_SUSPEND
/* BESL to HIRD Encoding array for USB2 LPM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2c510e4a7d4..d798b693191 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1829,6 +1829,7 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
#ifdef CONFIG_PM
int xhci_bus_suspend(struct usb_hcd *hcd);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 0a78df5f6cf..59694b5e5e9 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -357,6 +357,7 @@ struct hc_driver {
*/
int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
struct usb_device *, enum usb3_link_state state);
+ int (*find_raw_port_number)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -396,6 +397,7 @@ extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct platform_device;
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
--
cgit v1.2.3-70-g09d2
From 330305cc4a6b0cb75c22fc01b8826f0ad755550f Mon Sep 17 00:00:00 2001
From: Pravin B Shelar <pshelar@nicira.com>
Date: Sun, 24 Mar 2013 17:36:29 +0000
Subject: ipv4: Fix ip-header identification for gso packets.
ip-header id needs to be incremented even if IP_DF flag is set.
This behaviour was changed in commit 490ab08127cebc25e3a26
(IP_GRE: Fix IP-Identification).
Following patch fixes it so that identification is always
incremented.
Reported-by: Cong Wang <amwang@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
include/net/ipip.h | 16 ++++++----------
net/ipv4/af_inet.c | 3 +--
2 files changed, 7 insertions(+), 12 deletions(-)
(limited to 'include')
diff --git a/include/net/ipip.h b/include/net/ipip.h
index fd19625ff99..982141c1520 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -77,15 +77,11 @@ static inline void tunnel_ip_select_ident(struct sk_buff *skb,
{
struct iphdr *iph = ip_hdr(skb);
- if (iph->frag_off & htons(IP_DF))
- iph->id = 0;
- else {
- /* Use inner packet iph-id if possible. */
- if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
- iph->id = old_iph->id;
- else
- __ip_select_ident(iph, dst,
- (skb_shinfo(skb)->gso_segs ?: 1) - 1);
- }
+ /* Use inner packet iph-id if possible. */
+ if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
+ iph->id = old_iph->id;
+ else
+ __ip_select_ident(iph, dst,
+ (skb_shinfo(skb)->gso_segs ?: 1) - 1);
}
#endif
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 68f6a94f766..c929d9c1c4b 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1333,8 +1333,7 @@ static struct sk_buff *inet_gso_segment(struct sk_buff *skb,
iph->frag_off |= htons(IP_MF);
offset += (skb->len - skb->mac_len - iph->ihl * 4);
} else {
- if (!(iph->frag_off & htons(IP_DF)))
- iph->id = htons(id++);
+ iph->id = htons(id++);
}
iph->tot_len = htons(skb->len - skb->mac_len);
iph->check = 0;
--
cgit v1.2.3-70-g09d2
From 3151527ee007b73a0ebd296010f1c0454a919c7d Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 15 Mar 2013 01:45:51 -0700
Subject: userns: Don't allow creation if the user is chrooted
Guarantee that the policy of which files may be access that is
established by setting the root directory will not be violated
by user namespaces by verifying that the root directory points
to the root of the mount namespace at the time of user namespace
creation.
Changing the root is a privileged operation, and as a matter of policy
it serves to limit unprivileged processes to files below the current
root directory.
For reasons of simplicity and comprehensibility the privilege to
change the root directory is gated solely on the CAP_SYS_CHROOT
capability in the user namespace. Therefore when creating a user
namespace we must ensure that the policy of which files may be access
can not be violated by changing the root directory.
Anyone who runs a processes in a chroot and would like to use user
namespace can setup the same view of filesystems with a mount
namespace instead. With this result that this is not a practical
limitation for using user namespaces.
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
fs/namespace.c | 24 ++++++++++++++++++++++++
include/linux/fs_struct.h | 2 ++
kernel/user_namespace.c | 9 +++++++++
3 files changed, 35 insertions(+)
(limited to 'include')
diff --git a/fs/namespace.c b/fs/namespace.c
index 50ca17d3cb4..a3035223d42 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -2732,6 +2732,30 @@ bool our_mnt(struct vfsmount *mnt)
return check_mnt(real_mount(mnt));
}
+bool current_chrooted(void)
+{
+ /* Does the current process have a non-standard root */
+ struct path ns_root;
+ struct path fs_root;
+ bool chrooted;
+
+ /* Find the namespace root */
+ ns_root.mnt = ¤t->nsproxy->mnt_ns->root->mnt;
+ ns_root.dentry = ns_root.mnt->mnt_root;
+ path_get(&ns_root);
+ while (d_mountpoint(ns_root.dentry) && follow_down_one(&ns_root))
+ ;
+
+ get_fs_root(current->fs, &fs_root);
+
+ chrooted = !path_equal(&fs_root, &ns_root);
+
+ path_put(&fs_root);
+ path_put(&ns_root);
+
+ return chrooted;
+}
+
static void *mntns_get(struct task_struct *task)
{
struct mnt_namespace *ns = NULL;
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
index 729eded4b24..2b93a9a5a1e 100644
--- a/include/linux/fs_struct.h
+++ b/include/linux/fs_struct.h
@@ -50,4 +50,6 @@ static inline void get_fs_root_and_pwd(struct fs_struct *fs, struct path *root,
spin_unlock(&fs->lock);
}
+extern bool current_chrooted(void);
+
#endif /* _LINUX_FS_STRUCT_H */
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index b14f4d34204..0f1e4288457 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -61,6 +61,15 @@ int create_user_ns(struct cred *new)
kgid_t group = new->egid;
int ret;
+ /*
+ * Verify that we can not violate the policy of which files
+ * may be accessed that is specified by the root directory,
+ * by verifing that the root directory is at the root of the
+ * mount namespace which allows all files to be accessed.
+ */
+ if (current_chrooted())
+ return -EPERM;
+
/* The creator needs a mapping in the parent user namespace
* or else we won't be able to reasonably tell userspace who
* created a user_namespace.
--
cgit v1.2.3-70-g09d2
From 90563b198e4c6674c63672fae1923da467215f45 Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Fri, 22 Mar 2013 03:10:15 -0700
Subject: vfs: Add a mount flag to lock read only bind mounts
When a read-only bind mount is copied from mount namespace in a higher
privileged user namespace to a mount namespace in a lesser privileged
user namespace, it should not be possible to remove the the read-only
restriction.
Add a MNT_LOCK_READONLY mount flag to indicate that a mount must
remain read-only.
CC: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
fs/namespace.c | 3 +++
include/linux/mount.h | 2 ++
2 files changed, 5 insertions(+)
(limited to 'include')
diff --git a/fs/namespace.c b/fs/namespace.c
index a3035223d42..8505b5ece5d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1713,6 +1713,9 @@ static int change_mount_flags(struct vfsmount *mnt, int ms_flags)
if (readonly_request == __mnt_is_readonly(mnt))
return 0;
+ if (mnt->mnt_flags & MNT_LOCK_READONLY)
+ return -EPERM;
+
if (readonly_request)
error = mnt_make_readonly(real_mount(mnt));
else
diff --git a/include/linux/mount.h b/include/linux/mount.h
index d7029f4a191..73005f9957e 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -47,6 +47,8 @@ struct mnt_namespace;
#define MNT_INTERNAL 0x4000
+#define MNT_LOCK_READONLY 0x400000
+
struct vfsmount {
struct dentry *mnt_root; /* root of the mounted tree */
struct super_block *mnt_sb; /* pointer to superblock */
--
cgit v1.2.3-70-g09d2
From 87a8ebd637dafc255070f503909a053cf0d98d3f Mon Sep 17 00:00:00 2001
From: "Eric W. Biederman" <ebiederm@xmission.com>
Date: Sun, 24 Mar 2013 14:28:27 -0700
Subject: userns: Restrict when proc and sysfs can be mounted
Only allow unprivileged mounts of proc and sysfs if they are already
mounted when the user namespace is created.
proc and sysfs are interesting because they have content that is
per namespace, and so fresh mounts are needed when new namespaces
are created while at the same time proc and sysfs have content that
is shared between every instance.
Respect the policy of who may see the shared content of proc and sysfs
by only allowing new mounts if there was an existing mount at the time
the user namespace was created.
In practice there are only two interesting cases: proc and sysfs are
mounted at their usual places, proc and sysfs are not mounted at all
(some form of mount namespace jail).
Cc: stable@vger.kernel.org
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
---
fs/namespace.c | 21 +++++++++++++++++++++
fs/proc/root.c | 4 ++++
fs/sysfs/mount.c | 4 ++++
include/linux/user_namespace.h | 4 ++++
kernel/user.c | 2 ++
kernel/user_namespace.c | 2 ++
6 files changed, 37 insertions(+)
(limited to 'include')
diff --git a/fs/namespace.c b/fs/namespace.c
index 968d4c5eae0..d581e45c0a9 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -2763,6 +2763,27 @@ bool current_chrooted(void)
return chrooted;
}
+void update_mnt_policy(struct user_namespace *userns)
+{
+ struct mnt_namespace *ns = current->nsproxy->mnt_ns;
+ struct mount *mnt;
+
+ down_read(&namespace_sem);
+ list_for_each_entry(mnt, &ns->list, mnt_list) {
+ switch (mnt->mnt.mnt_sb->s_magic) {
+ case SYSFS_MAGIC:
+ userns->may_mount_sysfs = true;
+ break;
+ case PROC_SUPER_MAGIC:
+ userns->may_mount_proc = true;
+ break;
+ }
+ if (userns->may_mount_sysfs && userns->may_mount_proc)
+ break;
+ }
+ up_read(&namespace_sem);
+}
+
static void *mntns_get(struct task_struct *task)
{
struct mnt_namespace *ns = NULL;
diff --git a/fs/proc/root.c b/fs/proc/root.c
index c6e9fac26ba..9c7fab1d23f 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -16,6 +16,7 @@
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/user_namespace.h>
#include <linux/mount.h>
#include <linux/pid_namespace.h>
#include <linux/parser.h>
@@ -108,6 +109,9 @@ static struct dentry *proc_mount(struct file_system_type *fs_type,
} else {
ns = task_active_pid_ns(current);
options = data;
+
+ if (!current_user_ns()->may_mount_proc)
+ return ERR_PTR(-EPERM);
}
sb = sget(fs_type, proc_test_super, proc_set_super, flags, ns);
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 8d924b5ec73..afd83273e6c 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/magic.h>
#include <linux/slab.h>
+#include <linux/user_namespace.h>
#include "sysfs.h"
@@ -111,6 +112,9 @@ static struct dentry *sysfs_mount(struct file_system_type *fs_type,
struct super_block *sb;
int error;
+ if (!(flags & MS_KERNMOUNT) && !current_user_ns()->may_mount_sysfs)
+ return ERR_PTR(-EPERM);
+
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return ERR_PTR(-ENOMEM);
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
index 4ce00932493..b6b215f13b4 100644
--- a/include/linux/user_namespace.h
+++ b/include/linux/user_namespace.h
@@ -26,6 +26,8 @@ struct user_namespace {
kuid_t owner;
kgid_t group;
unsigned int proc_inum;
+ bool may_mount_sysfs;
+ bool may_mount_proc;
};
extern struct user_namespace init_user_ns;
@@ -82,4 +84,6 @@ static inline void put_user_ns(struct user_namespace *ns)
#endif
+void update_mnt_policy(struct user_namespace *userns);
+
#endif /* _LINUX_USER_H */
diff --git a/kernel/user.c b/kernel/user.c
index e81978e8c03..8e635a18ab5 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -51,6 +51,8 @@ struct user_namespace init_user_ns = {
.owner = GLOBAL_ROOT_UID,
.group = GLOBAL_ROOT_GID,
.proc_inum = PROC_USER_INIT_INO,
+ .may_mount_sysfs = true,
+ .may_mount_proc = true,
};
EXPORT_SYMBOL_GPL(init_user_ns);
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index 0f1e4288457..a54f26f82eb 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -96,6 +96,8 @@ int create_user_ns(struct cred *new)
set_cred_user_ns(new, ns);
+ update_mnt_policy(ns);
+
return 0;
}
--
cgit v1.2.3-70-g09d2
From 09a9f1d27892255cfb9c91203f19476765e2d8d1 Mon Sep 17 00:00:00 2001
From: Michel Lespinasse <walken@google.com>
Date: Thu, 28 Mar 2013 16:26:23 -0700
Subject: Revert "mm: introduce VM_POPULATE flag to better deal with racy
userspace programs"
This reverts commit 186930500985 ("mm: introduce VM_POPULATE flag to
better deal with racy userspace programs").
VM_POPULATE only has any effect when userspace plays racy games with
vmas by trying to unmap and remap memory regions that mmap or mlock are
operating on.
Also, the only effect of VM_POPULATE when userspace plays such games is
that it avoids populating new memory regions that get remapped into the
address range that was being operated on by the original mmap or mlock
calls.
Let's remove VM_POPULATE as there isn't any strong argument to mandate a
new vm_flag.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
include/linux/mm.h | 1 -
include/linux/mman.h | 4 +---
mm/fremap.c | 12 ++----------
mm/mlock.c | 11 +++++------
mm/mmap.c | 4 +++-
5 files changed, 11 insertions(+), 21 deletions(-)
(limited to 'include')
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 7acc9dc73c9..e19ff30ad0a 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -87,7 +87,6 @@ extern unsigned int kobjsize(const void *objp);
#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
-#define VM_POPULATE 0x00001000
#define VM_LOCKED 0x00002000
#define VM_IO 0x00004000 /* Memory mapped I/O or similar */
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 61c7a87e5d2..9aa863da287 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -79,8 +79,6 @@ calc_vm_flag_bits(unsigned long flags)
{
return _calc_vm_trans(flags, MAP_GROWSDOWN, VM_GROWSDOWN ) |
_calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) |
- ((flags & MAP_LOCKED) ? (VM_LOCKED | VM_POPULATE) : 0) |
- (((flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE) ?
- VM_POPULATE : 0);
+ _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED );
}
#endif /* _LINUX_MMAN_H */
diff --git a/mm/fremap.c b/mm/fremap.c
index 4723ac8d2fc..87da3590c61 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -204,10 +204,8 @@ get_write_lock:
unsigned long addr;
struct file *file = get_file(vma->vm_file);
- vm_flags = vma->vm_flags;
- if (!(flags & MAP_NONBLOCK))
- vm_flags |= VM_POPULATE;
- addr = mmap_region(file, start, size, vm_flags, pgoff);
+ addr = mmap_region(file, start, size,
+ vma->vm_flags, pgoff);
fput(file);
if (IS_ERR_VALUE(addr)) {
err = addr;
@@ -226,12 +224,6 @@ get_write_lock:
mutex_unlock(&mapping->i_mmap_mutex);
}
- if (!(flags & MAP_NONBLOCK) && !(vma->vm_flags & VM_POPULATE)) {
- if (!has_write_lock)
- goto get_write_lock;
- vma->vm_flags |= VM_POPULATE;
- }
-
if (vma->vm_flags & VM_LOCKED) {
/*
* drop PG_Mlocked flag for over-mapped range
diff --git a/mm/mlock.c b/mm/mlock.c
index 1c5e33fce63..79b7cf7d1bc 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -358,7 +358,7 @@ static int do_mlock(unsigned long start, size_t len, int on)
newflags = vma->vm_flags & ~VM_LOCKED;
if (on)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
tmp = vma->vm_end;
if (tmp > end)
@@ -418,8 +418,7 @@ int __mm_populate(unsigned long start, unsigned long len, int ignore_errors)
* range with the first VMA. Also, skip undesirable VMA types.
*/
nend = min(end, vma->vm_end);
- if ((vma->vm_flags & (VM_IO | VM_PFNMAP | VM_POPULATE)) !=
- VM_POPULATE)
+ if (vma->vm_flags & (VM_IO | VM_PFNMAP))
continue;
if (nstart < vma->vm_start)
nstart = vma->vm_start;
@@ -492,9 +491,9 @@ static int do_mlockall(int flags)
struct vm_area_struct * vma, * prev = NULL;
if (flags & MCL_FUTURE)
- current->mm->def_flags |= VM_LOCKED | VM_POPULATE;
+ current->mm->def_flags |= VM_LOCKED;
else
- current->mm->def_flags &= ~(VM_LOCKED | VM_POPULATE);
+ current->mm->def_flags &= ~VM_LOCKED;
if (flags == MCL_FUTURE)
goto out;
@@ -503,7 +502,7 @@ static int do_mlockall(int flags)
newflags = vma->vm_flags & ~VM_LOCKED;
if (flags & MCL_CURRENT)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
/* Ignore errors */
mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
diff --git a/mm/mmap.c b/mm/mmap.c
index 2664a47cec9..6466699b16c 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1306,7 +1306,9 @@ unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
}
addr = mmap_region(file, addr, len, vm_flags, pgoff);
- if (!IS_ERR_VALUE(addr) && (vm_flags & VM_POPULATE))
+ if (!IS_ERR_VALUE(addr) &&
+ ((vm_flags & VM_LOCKED) ||
+ (flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE))
*populate = len;
return addr;
}
--
cgit v1.2.3-70-g09d2
From dbf520a9d7d4d5ba28d2947be11e34099a5e3e20 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Sun, 31 Mar 2013 00:04:40 +0000
Subject: Revert "lockdep: check that no locks held at freeze time"
This reverts commit 6aa9707099c4b25700940eb3d016f16c4434360d.
Commit 6aa9707099c4 ("lockdep: check that no locks held at freeze time")
causes problems with NFS root filesystems. The failures were noticed on
OMAP2 and 3 boards during kernel init:
[ BUG: swapper/0/1 still has locks held! ]
3.9.0-rc3-00344-ga937536 #1 Not tainted
-------------------------------------
1 lock held by swapper/0/1:
#0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574
stack backtrace:
rpc_wait_bit_killable
__wait_on_bit
out_of_line_wait_on_bit
__rpc_execute
rpc_run_task
rpc_call_sync
nfs_proc_get_root
nfs_get_root
nfs_fs_mount_common
nfs_try_mount
nfs_fs_mount
mount_fs
vfs_kern_mount
do_mount
sys_mount
do_mount_root
mount_root
prepare_namespace
kernel_init_freeable
kernel_init
Although the rootfs mounts, the system is unstable. Here's a transcript
from a PM test:
http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt
Here's what the test log should look like:
http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt
Mailing list discussion is here:
http://lkml.org/lkml/2013/3/4/221
Deal with this for v3.9 by reverting the problem commit, until folks can
figure out the right long-term course of action.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: <maciej.rutecki@gmail.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ben Chan <benchan@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
include/linux/debug_locks.h | 4 ++--
include/linux/freezer.h | 3 ---
kernel/exit.c | 2 +-
kernel/lockdep.c | 17 +++++++++--------
4 files changed, 12 insertions(+), 14 deletions(-)
(limited to 'include')
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index a975de1ff59..3bd46f76675 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -51,7 +51,7 @@ struct task_struct;
extern void debug_show_all_locks(void);
extern void debug_show_held_locks(struct task_struct *task);
extern void debug_check_no_locks_freed(const void *from, unsigned long len);
-extern void debug_check_no_locks_held(void);
+extern void debug_check_no_locks_held(struct task_struct *task);
#else
static inline void debug_show_all_locks(void)
{
@@ -67,7 +67,7 @@ debug_check_no_locks_freed(const void *from, unsigned long len)
}
static inline void
-debug_check_no_locks_held(void)
+debug_check_no_locks_held(struct task_struct *task)
{
}
#endif
diff --git a/include/linux/freezer.h b/include/linux/freezer.h
index 043a5cf8b5b..e70df40d84f 100644
--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -3,7 +3,6 @@
#ifndef FREEZER_H_INCLUDED
#define FREEZER_H_INCLUDED
-#include <linux/debug_locks.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/atomic.h>
@@ -49,8 +48,6 @@ extern void thaw_kernel_threads(void);
static inline bool try_to_freeze(void)
{
- if (!(current->flags & PF_NOFREEZE))
- debug_check_no_locks_held();
might_sleep();
if (likely(!freezing(current)))
return false;
diff --git a/kernel/exit.c b/kernel/exit.c
index 51e485ca993..60bc027c61c 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -835,7 +835,7 @@ void do_exit(long code)
/*
* Make sure we are holding no locks:
*/
- debug_check_no_locks_held();
+ debug_check_no_locks_held(tsk);
/*
* We can do this unlocked here. The futex code uses this flag
* just to verify whether the pi state cleanup has been done
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 259db207b5d..8a0efac4f99 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -4088,7 +4088,7 @@ void debug_check_no_locks_freed(const void *mem_from, unsigned long mem_len)
}
EXPORT_SYMBOL_GPL(debug_check_no_locks_freed);
-static void print_held_locks_bug(void)
+static void print_held_locks_bug(struct task_struct *curr)
{
if (!debug_locks_off())
return;
@@ -4097,21 +4097,22 @@ static void print_held_locks_bug(void)
printk("\n");
printk("=====================================\n");
- printk("[ BUG: %s/%d still has locks held! ]\n",
- current->comm, task_pid_nr(current));
+ printk("[ BUG: lock held at task exit time! ]\n");
print_kernel_ident();
printk("-------------------------------------\n");
- lockdep_print_held_locks(current);
+ printk("%s/%d is exiting with locks still held!\n",
+ curr->comm, task_pid_nr(curr));
+ lockdep_print_held_locks(curr);
+
printk("\nstack backtrace:\n");
dump_stack();
}
-void debug_check_no_locks_held(void)
+void debug_check_no_locks_held(struct task_struct *task)
{
- if (unlikely(current->lockdep_depth > 0))
- print_held_locks_bug();
+ if (unlikely(task->lockdep_depth > 0))
+ print_held_locks_bug(task);
}
-EXPORT_SYMBOL_GPL(debug_check_no_locks_held);
void debug_show_all_locks(void)
{
--
cgit v1.2.3-70-g09d2