From 8e81725b17b07ed5052bbd826ff0479a4c22a0ea Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 21 May 2007 09:38:51 +0100 Subject: [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ Add definitions for S3C2443 functions in GPIOJ Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/regs-gpioj.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h index 02131a5a1d3..0362332faaf 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h @@ -98,5 +98,9 @@ #define S3C2440_GPJ12_OUTP (0x01 << 24) #define S3C2440_GPJ12_CAMRESET (0x02 << 24) +#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) +#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) +#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) + #endif /* __ASM_ARCH_REGS_GPIOJ_H */ -- cgit v1.2.3-70-g09d2 From ece97941c378b4a424530585a7c855e466f1bd2c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 21 May 2007 09:40:06 +0100 Subject: [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller Add physical address of HSMMC to include/asm-arm/arch-s3c2410/map.h Signed-off-by: Ben Dooks Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/map.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 4505aefbad1..19e77f03804 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -153,6 +153,10 @@ #define S3C2440_PA_AC97 (0x5B000000) #define S3C2440_SZ_AC97 SZ_1M +/* S3C2443 High-speed SD/MMC */ +#define S3C2443_PA_HSMMC (0x4A800000) +#define S3C2443_SZ_HSMMC (256) + /* ISA style IO, for each machine to sort out mappings for, if it * implements it. We reserve two 16M regions for ISA. */ -- cgit v1.2.3-70-g09d2 From 435c5da00b9610f9664c5d6f38dfdafce419ef4a Mon Sep 17 00:00:00 2001 From: Michael-Luke Jones Date: Wed, 23 May 2007 22:38:45 +0100 Subject: [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code This patch is required as the frequency fixup in nslu2_init does not run sufficiently early in the boot sequence to take effect. In addition the dsmg600 setup code behaviour has been improved such that a 'fixup' routine is avoided. Signed-off-by: Michael-Luke Jones Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-ixp4xx/dsmg600-setup.c | 24 +++++++++++++++--------- arch/arm/mach-ixp4xx/nslu2-setup.c | 18 +++++++++++++++--- include/asm-arm/arch-ixp4xx/platform.h | 1 + 4 files changed, 32 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 64685da1462..8112f726ffa 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -283,7 +283,7 @@ static struct irqaction ixp4xx_timer_irq = { .handler = ixp4xx_timer_interrupt, }; -static void __init ixp4xx_timer_init(void) +void __init ixp4xx_timer_init(void) { /* Reset/disable counter */ *IXP4XX_OSRT1 = 0; diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 1caff65e22c..1e75e105c4f 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -18,6 +18,7 @@ #include #include #include +#include static struct flash_platform_data dsmg600_flash_data = { .map_name = "cfi_probe", @@ -128,6 +129,19 @@ static void dsmg600_power_off(void) gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); } +static void __init dsmg600_timer_init(void) +{ + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = DSMG600_FREQ; + + /* Call standard timer_init function. */ + ixp4xx_timer_init(); +} + +static struct sys_timer dsmg600_timer = { + .init = dsmg600_timer_init, +}; + static void __init dsmg600_init(void) { ixp4xx_sys_init(); @@ -155,21 +169,13 @@ static void __init dsmg600_init(void) #endif } -static void __init dsmg600_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) -{ - /* The xtal on this machine is non-standard. */ - ixp4xx_timer_freq = DSMG600_FREQ; -} - MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, .boot_params = 0x00000100, - .fixup = dsmg600_fixup, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .timer = &dsmg600_timer, .init_machine = dsmg600_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 162c266e5f8..1aa45a2e6d6 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -22,6 +22,7 @@ #include #include #include +#include static struct flash_platform_data nslu2_flash_data = { .map_name = "cfi_probe", @@ -157,10 +158,21 @@ static void nslu2_power_off(void) gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); } -static void __init nslu2_init(void) +static void __init nslu2_timer_init(void) { - ixp4xx_timer_freq = NSLU2_FREQ; + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = NSLU2_FREQ; + + /* Call standard timer_init function. */ + ixp4xx_timer_init(); +} +static struct sys_timer nslu2_timer = { + .init = nslu2_timer_init, +}; + +static void __init nslu2_init(void) +{ ixp4xx_sys_init(); nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); @@ -185,6 +197,6 @@ MACHINE_START(NSLU2, "Linksys NSLU2") .boot_params = 0x00000100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .timer = &nslu2_timer, .init_machine = nslu2_init, MACHINE_END diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index ab194e5f665..2a44d3d6798 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -113,6 +113,7 @@ extern unsigned long ixp4xx_timer_freq; extern void ixp4xx_map_io(void); extern void ixp4xx_init_irq(void); extern void ixp4xx_sys_init(void); +extern void ixp4xx_timer_init(void); extern struct sys_timer ixp4xx_timer; extern void ixp4xx_pci_preinit(void); struct pci_sys_data; -- cgit v1.2.3-70-g09d2 From cc50a0df51e4f2a7982ade338b3d74825ca67e08 Mon Sep 17 00:00:00 2001 From: Michael-Luke Jones Date: Wed, 23 May 2007 22:41:53 +0100 Subject: [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup This trivial patch updates the nslu2 and nas-100d headers to remove pointless GPIO defines, and updates nslu2-setup.c accordingly. In addition minor style cleanups to some comments are included. Signed-off-by: Michael-Luke Jones Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/nas100d-setup.c | 3 ++- arch/arm/mach-ixp4xx/nslu2-setup.c | 19 ++++++++------- include/asm-arm/arch-ixp4xx/nas100d.h | 28 +++------------------ include/asm-arm/arch-ixp4xx/nslu2.h | 46 +++++++++-------------------------- 4 files changed, 28 insertions(+), 68 deletions(-) (limited to 'include') diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 9a31444d921..78a17413cec 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -155,7 +155,8 @@ static void __init nas100d_init(void) pm_power_off = nas100d_power_off; - /* This is only useful on a modified machine, but it is valuable + /* + * This is only useful on a modified machine, but it is valuable * to have it first in order to see debug messages, and so that * it does *not* get removed if platform_add_devices fails! */ diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 1aa45a2e6d6..9bf8ccbcacc 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -50,26 +50,26 @@ static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { static struct resource nslu2_led_resources[] = { { .name = "ready", /* green led */ - .start = NSLU2_LED_GRN, - .end = NSLU2_LED_GRN, + .start = NSLU2_LED_GRN_GPIO, + .end = NSLU2_LED_GRN_GPIO, .flags = IXP4XX_GPIO_HIGH, }, { .name = "status", /* red led */ - .start = NSLU2_LED_RED, - .end = NSLU2_LED_RED, + .start = NSLU2_LED_RED_GPIO, + .end = NSLU2_LED_RED_GPIO, .flags = IXP4XX_GPIO_HIGH, }, { .name = "disk-1", - .start = NSLU2_LED_DISK1, - .end = NSLU2_LED_DISK1, + .start = NSLU2_LED_DISK1_GPIO, + .end = NSLU2_LED_DISK1_GPIO, .flags = IXP4XX_GPIO_LOW, }, { .name = "disk-2", - .start = NSLU2_LED_DISK2, - .end = NSLU2_LED_DISK2, + .start = NSLU2_LED_DISK2_GPIO, + .end = NSLU2_LED_DISK2_GPIO, .flags = IXP4XX_GPIO_LOW, }, }; @@ -181,7 +181,8 @@ static void __init nslu2_init(void) pm_power_off = nslu2_power_off; - /* This is only useful on a modified machine, but it is valuable + /* + * This is only useful on a modified machine, but it is valuable * to have it first in order to see debug messages, and so that * it does *not* get removed if platform_add_devices fails! */ diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h index 84467a5190d..131e0a1d0df 100644 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -10,7 +10,7 @@ * based on ixdp425.h: * Copyright 2004 (c) MontaVista, Software, Inc. * - * This file is licensed under the terms of the GNU General Public + * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -36,31 +36,11 @@ #define NAS100D_PCI_INTD_PIN 8 #define NAS100D_PCI_INTE_PIN 7 -/* GPIO */ - -#define NAS100D_GPIO0 0 -#define NAS100D_GPIO1 1 -#define NAS100D_GPIO2 2 -#define NAS100D_GPIO3 3 -#define NAS100D_GPIO4 4 -#define NAS100D_GPIO5 5 -#define NAS100D_GPIO6 6 -#define NAS100D_GPIO7 7 -#define NAS100D_GPIO8 8 -#define NAS100D_GPIO9 9 -#define NAS100D_GPIO10 10 -#define NAS100D_GPIO11 11 -#define NAS100D_GPIO12 12 -#define NAS100D_GPIO13 13 -#define NAS100D_GPIO14 14 -#define NAS100D_GPIO15 15 - - /* Buttons */ -#define NAS100D_PB_GPIO NAS100D_GPIO14 -#define NAS100D_RB_GPIO NAS100D_GPIO4 -#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */ +#define NAS100D_PB_GPIO 14 +#define NAS100D_RB_GPIO 4 +#define NAS100D_PO_GPIO 12 /* power off */ #define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h index 6b437f7c995..850fdc5b45d 100644 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ b/include/asm-arm/arch-ixp4xx/nslu2.h @@ -9,7 +9,7 @@ * based on ixdp425.h: * Copyright 2004 (c) MontaVista, Software, Inc. * - * This file is licensed under the terms of the GNU General Public + * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -34,36 +34,14 @@ #define NSLU2_PCI_INTC_PIN 9 #define NSLU2_PCI_INTD_PIN 8 - /* NSLU2 Timer */ #define NSLU2_FREQ 66000000 -#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) -#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) - -/* GPIO */ - -#define NSLU2_GPIO0 0 -#define NSLU2_GPIO1 1 -#define NSLU2_GPIO2 2 -#define NSLU2_GPIO3 3 -#define NSLU2_GPIO4 4 -#define NSLU2_GPIO5 5 -#define NSLU2_GPIO6 6 -#define NSLU2_GPIO7 7 -#define NSLU2_GPIO8 8 -#define NSLU2_GPIO9 9 -#define NSLU2_GPIO10 10 -#define NSLU2_GPIO11 11 -#define NSLU2_GPIO12 12 -#define NSLU2_GPIO13 13 -#define NSLU2_GPIO14 14 -#define NSLU2_GPIO15 15 /* Buttons */ -#define NSLU2_PB_GPIO NSLU2_GPIO5 -#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */ -#define NSLU2_RB_GPIO NSLU2_GPIO12 +#define NSLU2_PB_GPIO 5 +#define NSLU2_PO_GPIO 8 /* power off */ +#define NSLU2_RB_GPIO 12 #define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 #define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 @@ -79,16 +57,16 @@ /* LEDs */ -#define NSLU2_LED_RED NSLU2_GPIO0 -#define NSLU2_LED_GRN NSLU2_GPIO1 +#define NSLU2_LED_RED_GPIO 0 +#define NSLU2_LED_GRN_GPIO 1 -#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) -#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) +#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO) +#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO) -#define NSLU2_LED_DISK1 NSLU2_GPIO3 -#define NSLU2_LED_DISK2 NSLU2_GPIO2 +#define NSLU2_LED_DISK1_GPIO 3 +#define NSLU2_LED_DISK2_GPIO 2 -#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) -#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) +#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO) +#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO) -- cgit v1.2.3-70-g09d2 From 3abc12012f957d1c5b9f35b244256f88ad146564 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 23 May 2007 14:14:15 -0700 Subject: [ARM] enable arbitary speed tty ioctls and split input/output speed Add the ioctls and values needed for this to the ARM26/ARM32 ports. The actual code has been in the base kernel for a while and automatically turns on when a port sets the required defines. [RMK: also added termbits.h changes to avoid build breakage] Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Russell King --- include/asm-arm/ioctls.h | 4 ++++ include/asm-arm/termbits.h | 16 +++++++++++++++- include/asm-arm/termios.h | 6 ++++-- 3 files changed, 23 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h index bb9a7aa10c1..a91d8a1523c 100644 --- a/include/asm-arm/ioctls.h +++ b/include/asm-arm/ioctls.h @@ -46,6 +46,10 @@ #define TIOCSBRK 0x5427 /* BSD compatibility */ #define TIOCCBRK 0x5428 /* BSD compatibility */ #define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h index a3f4fe1742d..f784d11f40b 100644 --- a/include/asm-arm/termbits.h +++ b/include/asm-arm/termbits.h @@ -15,6 +15,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + struct ktermios { tcflag_t c_iflag; /* input mode flags */ tcflag_t c_oflag; /* output mode flags */ @@ -128,6 +139,7 @@ struct ktermios { #define HUPCL 0002000 #define CLOCAL 0004000 #define CBAUDEX 0010000 +#define BOTHER 0010000 #define B57600 0010001 #define B115200 0010002 #define B230400 0010003 @@ -143,10 +155,12 @@ struct ktermios { #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CIBAUD 002003600000 /* input baud rate */ #define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ +#define IBSHIFT 16 + /* c_lflag bits */ #define ISIG 0000001 #define ICANON 0000002 diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h index 329c324c404..293e3f1bc3f 100644 --- a/include/asm-arm/termios.h +++ b/include/asm-arm/termios.h @@ -82,8 +82,10 @@ struct termio { copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ }) -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) #endif /* __KERNEL__ */ -- cgit v1.2.3-70-g09d2 From b91d8a1205faa76affc4e1b7d5ccac1d17026970 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 11 May 2007 16:18:55 -0700 Subject: [ARM] use __used attribute Use the newly introduced __used attribute in place of the deprecated __attribute_used__. Functionally the same. Signed-off-by: David Rientjes Signed-off-by: Russell King --- arch/arm/kernel/armksyms.c | 2 +- include/asm-arm/mach/arch.h | 2 +- include/asm-arm/setup.h | 4 ++-- include/asm-arm26/setup.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 9179e822031..f73d62e8ab6 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -57,7 +57,7 @@ extern void fp_enter(void); #define EXPORT_SYMBOL_ALIAS(sym,orig) \ EXPORT_CRC_ALIAS(sym) \ static const struct kernel_symbol __ksymtab_##sym \ - __attribute_used__ __attribute__((section("__ksymtab"))) = \ + __used __attribute__((section("__ksymtab"))) = \ { (unsigned long)&orig, #sym }; /* diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index fd2f9bf4dcc..c59fad18e73 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -49,7 +49,7 @@ struct machine_desc { */ #define MACHINE_START(_type,_name) \ static const struct machine_desc __mach_desc_##_type \ - __attribute_used__ \ + __used \ __attribute__((__section__(".arch.info.init"))) = { \ .nr = MACH_TYPE_##_type, \ .name = _name, diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h index e5407392afc..7bbf105463f 100644 --- a/include/asm-arm/setup.h +++ b/include/asm-arm/setup.h @@ -185,7 +185,7 @@ struct tagtable { #ifdef __KERNEL__ -#define __tag __attribute_used__ __attribute__((__section__(".taglist.init"))) +#define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ static struct tagtable __tagtable_##fn __tag = { tag, fn } @@ -218,7 +218,7 @@ struct early_params { }; #define __early_param(name,fn) \ -static struct early_params __early_##fn __attribute_used__ \ +static struct early_params __early_##fn __used \ __attribute__((__section__(".early_param.init"))) = { name, fn } #endif /* __KERNEL__ */ diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h index 10fd07c7666..e8256230647 100644 --- a/include/asm-arm26/setup.h +++ b/include/asm-arm26/setup.h @@ -173,7 +173,7 @@ struct tagtable { int (*parse)(const struct tag *); }; -#define __tag __attribute_used__ __attribute__((__section__(".taglist"))) +#define __tag __used __attribute__((__section__(".taglist"))) #define __tagtable(tag, fn) \ static struct tagtable __tagtable_##fn __tag = { tag, fn } -- cgit v1.2.3-70-g09d2 From eca8c2424171b6b6b2dcb0faa92dfddd1e3297d9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 28 May 2007 18:19:16 +0100 Subject: [ARM] 4412/1: S3C2412: reset errata fix The S3C2412 has an reset-errata where the clock may cause a glitch switching back to EXTCLK. We force a switch to EXTCLK before writing the reset register to force use of the CLKCON sync logic to properly switch. Fix problem reported by Matthieu Castet. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2412/s3c2412.c | 24 ++++++++++++++++++++++++ include/asm-arm/arch-s3c2410/regs-s3c2412.h | 21 +++++++++++++++++++++ 2 files changed, 45 insertions(+) create mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2412.h (limited to 'include') diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index c602aa39f9c..782b5814ced 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -29,6 +30,7 @@ #include #include +#include #include #include @@ -38,6 +40,7 @@ #include #include #include +#include #include #include @@ -106,6 +109,23 @@ static void s3c2412_idle(void) cpu_do_idle(); } +static void s3c2412_hard_reset(void) +{ + /* errata "Watch-dog/Software Reset Problem" specifies that + * this reset must be done with the SYSCLK sourced from + * EXTCLK instead of FOUT to avoid a glitch in the reset + * mechanism. + * + * See the watchdog section of the S3C2412 manual for more + * information on this fix. + */ + + __raw_writel(0x00, S3C2412_CLKSRC); + __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST); + + mdelay(1); +} + /* s3c2412_map_io * * register the standard cpu IO areas, and any passed in from the @@ -122,6 +142,10 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) s3c24xx_idle = s3c2412_idle; + /* set custom reset hook */ + + s3c24xx_reset_hook = s3c2412_hard_reset; + /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h new file mode 100644 index 00000000000..8ca6a3bc855 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-s3c2412.h @@ -0,0 +1,21 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 specific register definitions +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_H +#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" + +#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) +#define S3C2412_SWRST_RESET (0x533C2412) + +#endif /* __ASM_ARCH_REGS_S3C2412_H */ + -- cgit v1.2.3-70-g09d2 From 2ccdd1e77da52ad494e9af46bf272d816830cb28 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 18 May 2007 11:25:31 +0100 Subject: [ARM] 4394/1: ARMv7: Add the TLB range operations We are currently using the ARMv6 operations but need to duplicate some of the code because of the introduction of the new CPU barrier instructions in ARMv7. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 5 ++- arch/arm/mm/Makefile | 1 + arch/arm/mm/proc-v7.S | 2 +- arch/arm/mm/tlb-v7.S | 88 ++++++++++++++++++++++++++++++++++++++++++++++ include/asm-arm/tlbflush.h | 13 +++++++ 5 files changed, 107 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mm/tlb-v7.S (limited to 'include') diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 5f472a8b406..e7904bc92c7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -379,7 +379,7 @@ config CPU_V7 select CPU_CP15_MMU select CPU_HAS_ASID select CPU_COPY_V6 if MMU - select CPU_TLB_V6 if MMU + select CPU_TLB_V7 if MMU # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. @@ -498,6 +498,9 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool +config CPU_TLB_V7 + bool + endif config CPU_HAS_ASID diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index b5bd335ff14..762702765fc 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o +obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index dd823dd4a37..718f4782ee8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -256,7 +256,7 @@ __v7_proc_info: .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP .long cpu_v7_name .long v7_processor_functions - .long v6wbi_tlb_fns + .long v7wbi_tlb_fns .long v6_user_fns .long v7_cache_fns .size __v7_proc_info, . - __v7_proc_info diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S new file mode 100644 index 00000000000..b56dda8052f --- /dev/null +++ b/arch/arm/mm/tlb-v7.S @@ -0,0 +1,88 @@ +/* + * linux/arch/arm/mm/tlb-v7.S + * + * Copyright (C) 1997-2002 Russell King + * Modified for ARMv7 by Catalin Marinas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ARM architecture version 6 TLB handling functions. + * These assume a split I/D TLB. + */ +#include +#include +#include +#include +#include "proc-macros.S" + +/* + * v7wbi_flush_user_tlb_range(start, end, vma) + * + * Invalidate a range of TLB entries in the specified address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - vma - vma_struct describing address range + * + * It is assumed that: + * - the "Invalidate single entry" instruction will invalidate + * both the I and the D TLBs on Harvard-style TLBs + */ +ENTRY(v7wbi_flush_user_tlb_range) + vma_vm_mm r3, r2 @ get vma->vm_mm + mmid r3, r3 @ get vm_mm->context.id + dsb + mov r0, r0, lsr #PAGE_SHIFT @ align address + mov r1, r1, lsr #PAGE_SHIFT + asid r3, r3 @ mask ASID + orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA + mov r1, r1, lsl #PAGE_SHIFT + vma_vm_flags r2, r2 @ get vma->vm_flags +1: + mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1) + tst r2, #VM_EXEC @ Executable area ? + mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1) + add r0, r0, #PAGE_SZ + cmp r0, r1 + blo 1b + mov ip, #0 + mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB + dsb + mov pc, lr + +/* + * v7wbi_flush_kern_tlb_range(start,end) + * + * Invalidate a range of kernel TLB entries + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + */ +ENTRY(v7wbi_flush_kern_tlb_range) + dsb + mov r0, r0, lsr #PAGE_SHIFT @ align address + mov r1, r1, lsr #PAGE_SHIFT + mov r0, r0, lsl #PAGE_SHIFT + mov r1, r1, lsl #PAGE_SHIFT +1: + mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA + mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA + add r0, r0, #PAGE_SZ + cmp r0, r1 + blo 1b + mov r2, #0 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB + dsb + isb + mov pc, lr + + .section ".text.init", #alloc, #execinstr + + .type v7wbi_tlb_fns, #object +ENTRY(v7wbi_tlb_fns) + .long v7wbi_flush_user_tlb_range + .long v7wbi_flush_kern_tlb_range + .long v6wbi_tlb_flags + .size v7wbi_tlb_fns, . - v7wbi_tlb_fns diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index ccd0de010e8..71be4fded7e 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -138,6 +138,19 @@ # define v6wbi_always_flags (-1UL) #endif +#ifdef CONFIG_CPU_TLB_V7 +# define v7wbi_possible_flags v6wbi_tlb_flags +# define v7wbi_always_flags v6wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v7wbi +# endif +#else +# define v7wbi_possible_flags 0 +# define v7wbi_always_flags (-1UL) +#endif + #ifndef _TLB #error Unknown TLB model #endif -- cgit v1.2.3-70-g09d2