From 55883fd1048e09f5b6e1edaf0caf7e4f6f31f971 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 23 Dec 2013 01:28:05 +0100 Subject: batman-adv: clean nf state when removing protocol header If an interface enslaved into batman-adv is a bridge (or a virtual interface built on top of a bridge) the nf_bridge member of the skbs reaching the soft-interface is filled with the state about "netfilter bridge" operations. Then, if one of such skbs is locally delivered, the nf_bridge member should be cleaned up to avoid that the old state could mess up with other "netfilter bridge" operations when entering a second bridge. This is needed because batman-adv is an encapsulation protocol. However at the moment skb->nf_bridge is not released at all leading to bogus "netfilter bridge" behaviours. Fix this by cleaning the netfilter state of the skb before it gets delivered to the upper layer in interface_rx(). Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/soft-interface.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'net/batman-adv') diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index b4881f8e28e..875a702542c 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -346,6 +346,11 @@ void batadv_interface_rx(struct net_device *soft_iface, skb_pull_rcsum(skb, hdr_size); skb_reset_mac_header(skb); + /* clean the netfilter state now that the batman-adv header has been + * removed + */ + nf_reset(skb); + vid = batadv_get_vid(skb, hdr_size); ethhdr = eth_hdr(skb); -- cgit v1.2.3-70-g09d2