From f4f914b58019f0e50d521bbbadfaee260d766f95 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 20 Apr 2010 21:21:26 +0000 Subject: net: ipv6 bind to device issue The issue raises when having 2 NICs both assigned the same IPv6 global address. If a sender binds to a particular NIC (SO_BINDTODEVICE), the outgoing traffic is being sent via the first found. The bonded device is thus not taken into an account during the routing. From the ip6_route_output function: If the binding address is multicast, linklocal or loopback, the RT6_LOOKUP_F_IFACE bit is set, but not for global address. So binding global address will neglect SO_BINDTODEVICE-binded device, because the fib6_rule_lookup function path won't check for the flowi::oif field and take first route that fits. Signed-off-by: Jiri Olsa Signed-off-by: Scott Otto Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/ipv6') diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c2438e8cb9d..05ebd783304 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -815,7 +815,7 @@ struct dst_entry * ip6_route_output(struct net *net, struct sock *sk, { int flags = 0; - if (rt6_need_strict(&fl->fl6_dst)) + if (fl->oif || rt6_need_strict(&fl->fl6_dst)) flags |= RT6_LOOKUP_F_IFACE; if (!ipv6_addr_any(&fl->fl6_src)) -- cgit v1.2.3-70-g09d2