From ac71c691e6a5ce991fe221d3bdb0c972f617aa37 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 28 Oct 2007 14:17:44 +0100 Subject: mac80211: make simple rate control algorithm built-in Too frequently people do not have module autoloading enabled or fail to install the rate control module correctly, hence their hardware probing fails due to no rate control algorithm being available. This makes the 'simple' algorithm built into the mac80211 module unless EMBEDDED is enabled in which case it can be disabled (eg. if the wanted driver requires another rate control algorithm.) Signed-off-by: Johannes Berg Acked-by: Michael Buesch Signed-off-by: John W. Linville --- net/mac80211/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'net/mac80211/Kconfig') diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 6fffb3845ab..32c8c08c468 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -13,6 +13,18 @@ config MAC80211 This option enables the hardware independent IEEE 802.11 networking stack. +config MAC80211_RCSIMPLE + bool "'simple' rate control algorithm" + default y + depends on MAC80211 && EMBEDDED + help + This option allows you to turn off the 'simple' rate + control algorithm in mac80211. If you do turn it off, + you absolutely need another rate control algorithm. + + Say Y unless you know you will have another algorithm + available. + config MAC80211_LEDS bool "Enable LED triggers" depends on MAC80211 && LEDS_TRIGGERS -- cgit v1.2.3-70-g09d2