From 3a7bba649eaaa2068aa6e86ed8bcd10245d1f817 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 20 Mar 2013 17:05:45 +0200 Subject: mac80211: return the RSSI in dBm For the sake of speed of calculation and number accuracy, mac80211 tracks the RSSI in dBm * 16. But it forgot to divide back by 16 when the RSSI is asked by the driver. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index a7368870c8e..90cc2b82869 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2056,7 +2056,7 @@ int ieee80211_ave_rssi(struct ieee80211_vif *vif) /* non-managed type inferfaces */ return 0; } - return ifmgd->ave_beacon_signal; + return ifmgd->ave_beacon_signal / 16; } EXPORT_SYMBOL_GPL(ieee80211_ave_rssi); -- cgit v1.2.3-70-g09d2 From 59c1ec2b7884a044967883d9e6169a2cbb4715f3 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Tue, 19 Mar 2013 14:19:56 -0700 Subject: mac80211: make beacon-loss-count configurable On loaded systems with lots of VIFs, I see lots of beacon timeouts, even though the connection to the AP is very good. Allow tuning the beacon-loss-count variable to give the system longer to process beacons if the user prefers. Signed-off-by: Ben Greear [add the number of beacons to the message] Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4d383a93ea7..b86b8d4e02a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -56,7 +56,10 @@ MODULE_PARM_DESC(max_probe_tries, * probe on beacon miss before declaring the connection lost * default to what we want. */ -#define IEEE80211_BEACON_LOSS_COUNT 7 +static int beacon_loss_count = 7; +module_param(beacon_loss_count, int, 0644); +MODULE_PARM_DESC(beacon_loss_count, + "Number of beacon intervals before we decide beacon was lost."); /* * Time the connection can be idle before we probe @@ -1645,7 +1648,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value); sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec( - IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int)); + beacon_loss_count * bss_conf->beacon_int)); sdata->u.mgd.associated = cbss; memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN); @@ -1977,7 +1980,8 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, if (beacon) mlme_dbg_ratelimited(sdata, - "detected beacon loss from AP - probing\n"); + "detected beacon loss from AP (missed %d beacons) - probing\n", + beacon_loss_count); ieee80211_cqm_rssi_notify(&sdata->vif, NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL); -- cgit v1.2.3-70-g09d2 From 934457eeb0bbe9af1849d9201cb3fb81fd9fa4d0 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 21 Mar 2013 15:47:55 +0100 Subject: mac80211: use ieee80211_p2p_noa_attr structure Use ieee80211_p2p_noa_attr structure during P2P_PS (oppps) detection. Signed-off-by: Janusz Dziedzic Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b86b8d4e02a..f9258707b15 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1661,18 +1661,20 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, rcu_read_lock(); ies = rcu_dereference(cbss->ies); if (ies) { - u8 noa[2]; + struct ieee80211_p2p_noa_attr noa; int ret; ret = cfg80211_get_p2p_attr( ies->data, ies->len, IEEE80211_P2P_ATTR_ABSENCE_NOTICE, - noa, sizeof(noa)); + (u8 *) &noa, sizeof(noa)); if (ret >= 2) { - bss_conf->p2p_oppps = noa[1] & 0x80; - bss_conf->p2p_ctwindow = noa[1] & 0x7f; + bss_conf->p2p_oppps = noa.oppps_ctwindow & + IEEE80211_P2P_OPPPS_ENABLE_BIT; + bss_conf->p2p_ctwindow = noa.oppps_ctwindow & + IEEE80211_P2P_OPPPS_CTWINDOW_MASK; bss_info_changed |= BSS_CHANGED_P2P_PS; - sdata->u.mgd.p2p_noa_index = noa[0]; + sdata->u.mgd.p2p_noa_index = noa.index; } } rcu_read_unlock(); @@ -2961,18 +2963,20 @@ ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } if (sdata->vif.p2p) { - u8 noa[2]; + struct ieee80211_p2p_noa_attr noa; int ret; ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable, len - baselen, IEEE80211_P2P_ATTR_ABSENCE_NOTICE, - noa, sizeof(noa)); - if (ret >= 2 && sdata->u.mgd.p2p_noa_index != noa[0]) { - bss_conf->p2p_oppps = noa[1] & 0x80; - bss_conf->p2p_ctwindow = noa[1] & 0x7f; + (u8 *) &noa, sizeof(noa)); + if (ret >= 2 && sdata->u.mgd.p2p_noa_index != noa.index) { + bss_conf->p2p_oppps = noa.oppps_ctwindow & + IEEE80211_P2P_OPPPS_ENABLE_BIT; + bss_conf->p2p_ctwindow = noa.oppps_ctwindow & + IEEE80211_P2P_OPPPS_CTWINDOW_MASK; changed |= BSS_CHANGED_P2P_PS; - sdata->u.mgd.p2p_noa_index = noa[0]; + sdata->u.mgd.p2p_noa_index = noa.index; /* * make sure we update all information, the CRC * mechanism doesn't look at P2P attributes. -- cgit v1.2.3-70-g09d2 From 67baf66339f82b5ddef5731caedb1e6db496818d Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 21 Mar 2013 15:47:56 +0100 Subject: mac80211: add P2P NoA settings Add P2P NoA settings for STA mode. Signed-off-by: Janusz Dziedzic [fix docs] Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c | 12 ++++++-- include/net/mac80211.h | 6 ++-- net/mac80211/cfg.c | 23 +++++++++++---- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/mlme.c | 45 ++++++++++++++++------------- net/mac80211/trace.h | 6 ++-- 6 files changed, 57 insertions(+), 37 deletions(-) (limited to 'net/mac80211') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c index 341dbc0237e..1d20287b112 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c @@ -662,6 +662,7 @@ static int iwl_mvm_mac_ctxt_cmd_p2p_client(struct iwl_mvm *mvm, u32 action) { struct iwl_mac_ctx_cmd cmd = {}; + struct ieee80211_p2p_noa_attr *noa = &vif->bss_conf.p2p_noa_attr; WARN_ON(vif->type != NL80211_IFTYPE_STATION || !vif->p2p); @@ -671,7 +672,8 @@ static int iwl_mvm_mac_ctxt_cmd_p2p_client(struct iwl_mvm *mvm, /* Fill the data specific for station mode */ iwl_mvm_mac_ctxt_cmd_fill_sta(mvm, vif, &cmd.p2p_sta.sta); - cmd.p2p_sta.ctwin = cpu_to_le32(vif->bss_conf.p2p_ctwindow); + cmd.p2p_sta.ctwin = cpu_to_le32(noa->oppps_ctwindow & + IEEE80211_P2P_OPPPS_CTWINDOW_MASK); return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); } @@ -892,6 +894,7 @@ static int iwl_mvm_mac_ctxt_cmd_go(struct iwl_mvm *mvm, u32 action) { struct iwl_mac_ctx_cmd cmd = {}; + struct ieee80211_p2p_noa_attr *noa = &vif->bss_conf.p2p_noa_attr; WARN_ON(vif->type != NL80211_IFTYPE_AP || !vif->p2p); @@ -901,8 +904,11 @@ static int iwl_mvm_mac_ctxt_cmd_go(struct iwl_mvm *mvm, /* Fill the data specific for GO mode */ iwl_mvm_mac_ctxt_cmd_fill_ap(mvm, vif, &cmd.go.ap); - cmd.go.ctwin = cpu_to_le32(vif->bss_conf.p2p_ctwindow); - cmd.go.opp_ps_enabled = cpu_to_le32(!!vif->bss_conf.p2p_oppps); + cmd.go.ctwin = cpu_to_le32(noa->oppps_ctwindow & + IEEE80211_P2P_OPPPS_CTWINDOW_MASK); + cmd.go.opp_ps_enabled = + cpu_to_le32(!!(noa->oppps_ctwindow & + IEEE80211_P2P_OPPPS_ENABLE_BIT)); return iwl_mvm_mac_ctxt_send_cmd(mvm, &cmd); } diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dd73b8c6746..9b536172e27 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -330,8 +330,7 @@ enum ieee80211_rssi_event { * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm - * @p2p_ctwindow: P2P CTWindow, only for P2P client interfaces - * @p2p_oppps: P2P opportunistic PS is enabled + * @p2p_noa_attr: P2P NoA attribute for P2P powersave */ struct ieee80211_bss_conf { const u8 *bssid; @@ -365,8 +364,7 @@ struct ieee80211_bss_conf { size_t ssid_len; bool hidden_ssid; int txpower; - u8 p2p_ctwindow; - bool p2p_oppps; + struct ieee80211_p2p_noa_attr p2p_noa_attr; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e5c1441ac2b..50aaf25d473 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -965,8 +965,13 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, sdata->vif.bss_conf.hidden_ssid = (params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); - sdata->vif.bss_conf.p2p_ctwindow = params->p2p_ctwindow; - sdata->vif.bss_conf.p2p_oppps = params->p2p_opp_ps; + memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, + sizeof(sdata->vif.bss_conf.p2p_noa_attr)); + sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow = + params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; + if (params->p2p_opp_ps) + sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= + IEEE80211_P2P_OPPPS_ENABLE_BIT; err = ieee80211_assign_beacon(sdata, ¶ms->beacon); if (err < 0) @@ -1961,12 +1966,20 @@ static int ieee80211_change_bss(struct wiphy *wiphy, } if (params->p2p_ctwindow >= 0) { - sdata->vif.bss_conf.p2p_ctwindow = params->p2p_ctwindow; + sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= + ~IEEE80211_P2P_OPPPS_CTWINDOW_MASK; + sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= + params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; changed |= BSS_CHANGED_P2P_PS; } - if (params->p2p_opp_ps >= 0) { - sdata->vif.bss_conf.p2p_oppps = params->p2p_opp_ps; + if (params->p2p_opp_ps > 0) { + sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= + IEEE80211_P2P_OPPPS_ENABLE_BIT; + changed |= BSS_CHANGED_P2P_PS; + } else if (params->p2p_opp_ps == 0) { + sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= + ~IEEE80211_P2P_OPPPS_ENABLE_BIT; changed |= BSS_CHANGED_P2P_PS; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index ae2d1754b79..55155e3b9b2 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -442,7 +442,7 @@ struct ieee80211_if_managed { u8 use_4addr; - u8 p2p_noa_index; + s16 p2p_noa_index; /* Signal strength from the last Beacon frame in the current BSS. */ int last_beacon_signal; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f9258707b15..8b3e852d603 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1661,20 +1661,17 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, rcu_read_lock(); ies = rcu_dereference(cbss->ies); if (ies) { - struct ieee80211_p2p_noa_attr noa; int ret; ret = cfg80211_get_p2p_attr( ies->data, ies->len, IEEE80211_P2P_ATTR_ABSENCE_NOTICE, - (u8 *) &noa, sizeof(noa)); + (u8 *) &bss_conf->p2p_noa_attr, + sizeof(bss_conf->p2p_noa_attr)); if (ret >= 2) { - bss_conf->p2p_oppps = noa.oppps_ctwindow & - IEEE80211_P2P_OPPPS_ENABLE_BIT; - bss_conf->p2p_ctwindow = noa.oppps_ctwindow & - IEEE80211_P2P_OPPPS_CTWINDOW_MASK; + sdata->u.mgd.p2p_noa_index = + bss_conf->p2p_noa_attr.index; bss_info_changed |= BSS_CHANGED_P2P_PS; - sdata->u.mgd.p2p_noa_index = noa.index; } } rcu_read_unlock(); @@ -1799,8 +1796,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, changed |= BSS_CHANGED_ASSOC; sdata->vif.bss_conf.assoc = false; - sdata->vif.bss_conf.p2p_ctwindow = 0; - sdata->vif.bss_conf.p2p_oppps = false; + ifmgd->p2p_noa_index = -1; + memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, + sizeof(sdata->vif.bss_conf.p2p_noa_attr)); /* on the next assoc, re-program HT/VHT parameters */ memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); @@ -2963,24 +2961,30 @@ ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } if (sdata->vif.p2p) { - struct ieee80211_p2p_noa_attr noa; + struct ieee80211_p2p_noa_attr noa = {}; int ret; ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable, len - baselen, IEEE80211_P2P_ATTR_ABSENCE_NOTICE, (u8 *) &noa, sizeof(noa)); - if (ret >= 2 && sdata->u.mgd.p2p_noa_index != noa.index) { - bss_conf->p2p_oppps = noa.oppps_ctwindow & - IEEE80211_P2P_OPPPS_ENABLE_BIT; - bss_conf->p2p_ctwindow = noa.oppps_ctwindow & - IEEE80211_P2P_OPPPS_CTWINDOW_MASK; + if (ret >= 2) { + if (sdata->u.mgd.p2p_noa_index != noa.index) { + /* valid noa_attr and index changed */ + sdata->u.mgd.p2p_noa_index = noa.index; + memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); + changed |= BSS_CHANGED_P2P_PS; + /* + * make sure we update all information, the CRC + * mechanism doesn't look at P2P attributes. + */ + ifmgd->beacon_crc_valid = false; + } + } else if (sdata->u.mgd.p2p_noa_index != -1) { + /* noa_attr not found and we had valid noa_attr before */ + sdata->u.mgd.p2p_noa_index = -1; + memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); changed |= BSS_CHANGED_P2P_PS; - sdata->u.mgd.p2p_noa_index = noa.index; - /* - * make sure we update all information, the CRC - * mechanism doesn't look at P2P attributes. - */ ifmgd->beacon_crc_valid = false; } } @@ -3523,6 +3527,7 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) ifmgd->powersave = sdata->wdev.ps; ifmgd->uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; ifmgd->uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; + ifmgd->p2p_noa_index = -1; mutex_init(&ifmgd->mtx); diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index c5899797a8d..d79e374e129 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -359,8 +359,7 @@ TRACE_EVENT(drv_bss_info_changed, __dynamic_array(u8, ssid, info->ssid_len); __field(bool, hidden_ssid); __field(int, txpower) - __field(u8, p2p_ctwindow) - __field(bool, p2p_oppps) + __field(u8, p2p_oppps_ctwindow) ), TP_fast_assign( @@ -400,8 +399,7 @@ TRACE_EVENT(drv_bss_info_changed, memcpy(__get_dynamic_array(ssid), info->ssid, info->ssid_len); __entry->hidden_ssid = info->hidden_ssid; __entry->txpower = info->txpower; - __entry->p2p_ctwindow = info->p2p_ctwindow; - __entry->p2p_oppps = info->p2p_oppps; + __entry->p2p_oppps_ctwindow = info->p2p_noa_attr.oppps_ctwindow; ), TP_printk( -- cgit v1.2.3-70-g09d2 From 1852d40eaba36fe1e97e0e497ffce291c99f5886 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Mar 2013 20:22:28 +0100 Subject: mac80211: ibss: disable beaconing before freeing beacon If we don't disable beaconing, the driver might attempt to continue, but would fail to request a beacon. That's strange, so disable beaconing first. Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 539d4a11b47..bd02fac188b 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -58,14 +58,6 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, /* Reset own TSF to allow time synchronization work. */ drv_reset_tsf(local, sdata); - skb = ifibss->skb; - RCU_INIT_POINTER(ifibss->presp, NULL); - synchronize_rcu(); - skb->data = skb->head; - skb->len = 0; - skb_reset_tail_pointer(skb); - skb_reserve(skb, sdata->local->hw.extra_tx_headroom); - if (!ether_addr_equal(ifibss->bssid, bssid)) sta_info_flush(sdata); @@ -73,10 +65,21 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, if (sdata->vif.bss_conf.ibss_joined) { sdata->vif.bss_conf.ibss_joined = false; sdata->vif.bss_conf.ibss_creator = false; + sdata->vif.bss_conf.enable_beacon = false; netif_carrier_off(sdata->dev); - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IBSS); + ieee80211_bss_info_change_notify(sdata, + BSS_CHANGED_IBSS | + BSS_CHANGED_BEACON_ENABLED); } + skb = ifibss->skb; + RCU_INIT_POINTER(ifibss->presp, NULL); + synchronize_rcu(); + skb->data = skb->head; + skb->len = 0; + skb_reset_tail_pointer(skb); + skb_reserve(skb, sdata->local->hw.extra_tx_headroom); + sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; cfg80211_chandef_create(&chandef, chan, ifibss->channel_type); -- cgit v1.2.3-70-g09d2 From c3ffeab4345830aadfc78444933754330f1339e7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Mar 2013 20:54:29 +0100 Subject: mac80211: ibss: use beacon_data struct for beacon and probe response Instead of having an SKB all the time, use a beacon_data struct with just the information required. This also allows removing a synchronize_rcu() and using kfree_rcu() instead. Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 131 ++++++++++++++++++++++----------------------- net/mac80211/ieee80211_i.h | 3 +- net/mac80211/tx.c | 7 ++- 3 files changed, 70 insertions(+), 71 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index bd02fac188b..5ab32e2a7b5 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -44,7 +44,6 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; int rates, i; - struct sk_buff *skb; struct ieee80211_mgmt *mgmt; u8 *pos; struct ieee80211_supported_band *sband; @@ -52,6 +51,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, u32 bss_change; u8 supp_rates[IEEE80211_MAX_SUPP_RATES]; struct cfg80211_chan_def chandef; + struct beacon_data *presp; + int frame_len; lockdep_assert_held(&ifibss->mtx); @@ -72,13 +73,11 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, BSS_CHANGED_BEACON_ENABLED); } - skb = ifibss->skb; - RCU_INIT_POINTER(ifibss->presp, NULL); - synchronize_rcu(); - skb->data = skb->head; - skb->len = 0; - skb_reset_tail_pointer(skb); - skb_reserve(skb, sdata->local->hw.extra_tx_headroom); + presp = rcu_dereference_protected(ifibss->presp, + lockdep_is_held(&ifibss->mtx)); + rcu_assign_pointer(ifibss->presp, NULL); + if (presp) + kfree_rcu(presp, rcu_head); sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; @@ -101,19 +100,24 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, sband = local->hw.wiphy->bands[chan->band]; - /* build supported rates array */ - pos = supp_rates; - for (i = 0; i < sband->n_bitrates; i++) { - int rate = sband->bitrates[i].bitrate; - u8 basic = 0; - if (basic_rates & BIT(i)) - basic = 0x80; - *pos++ = basic | (u8) (rate / 5); - } - /* Build IBSS probe response */ - mgmt = (void *) skb_put(skb, 24 + sizeof(mgmt->u.beacon)); - memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon)); + frame_len = sizeof(struct ieee80211_hdr_3addr) + + 12 /* struct ieee80211_mgmt.u.beacon */ + + 2 + IEEE80211_MAX_SSID_LEN /* max SSID */ + + 2 + 8 /* max Supported Rates */ + + 3 /* max DS params */ + + 4 /* IBSS params */ + + 2 + (IEEE80211_MAX_SUPP_RATES - 8) + + 2 + sizeof(struct ieee80211_ht_cap) + + 2 + sizeof(struct ieee80211_ht_operation) + + ifibss->ie_len; + presp = kzalloc(sizeof(*presp) + frame_len, GFP_KERNEL); + if (!presp) + return; + + presp->head = (void *)(presp + 1); + + mgmt = (void *) presp->head; mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); eth_broadcast_addr(mgmt->da); @@ -123,27 +127,30 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, mgmt->u.beacon.timestamp = cpu_to_le64(tsf); mgmt->u.beacon.capab_info = cpu_to_le16(capability); - pos = skb_put(skb, 2 + ifibss->ssid_len); + pos = (u8 *)mgmt + offsetof(struct ieee80211_mgmt, u.beacon.variable); + *pos++ = WLAN_EID_SSID; *pos++ = ifibss->ssid_len; memcpy(pos, ifibss->ssid, ifibss->ssid_len); + pos += ifibss->ssid_len; - rates = sband->n_bitrates; - if (rates > 8) - rates = 8; - pos = skb_put(skb, 2 + rates); + rates = min_t(int, 8, sband->n_bitrates); *pos++ = WLAN_EID_SUPP_RATES; *pos++ = rates; - memcpy(pos, supp_rates, rates); + for (i = 0; i < rates; i++) { + int rate = sband->bitrates[i].bitrate; + u8 basic = 0; + if (basic_rates & BIT(i)) + basic = 0x80; + *pos++ = basic | (u8) (rate / 5); + } if (sband->band == IEEE80211_BAND_2GHZ) { - pos = skb_put(skb, 2 + 1); *pos++ = WLAN_EID_DS_PARAMS; *pos++ = 1; *pos++ = ieee80211_frequency_to_channel(chan->center_freq); } - pos = skb_put(skb, 2 + 2); *pos++ = WLAN_EID_IBSS_PARAMS; *pos++ = 2; /* FIX: set ATIM window based on scan results */ @@ -151,23 +158,25 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, *pos++ = 0; if (sband->n_bitrates > 8) { - rates = sband->n_bitrates - 8; - pos = skb_put(skb, 2 + rates); *pos++ = WLAN_EID_EXT_SUPP_RATES; - *pos++ = rates; - memcpy(pos, &supp_rates[8], rates); + *pos++ = sband->n_bitrates - 8; + for (i = 8; i < sband->n_bitrates; i++) { + int rate = sband->bitrates[i].bitrate; + u8 basic = 0; + if (basic_rates & BIT(i)) + basic = 0x80; + *pos++ = basic | (u8) (rate / 5); + } } - if (ifibss->ie_len) - memcpy(skb_put(skb, ifibss->ie_len), - ifibss->ie, ifibss->ie_len); + if (ifibss->ie_len) { + memcpy(pos, ifibss->ie, ifibss->ie_len); + pos += ifibss->ie_len; + } /* add HT capability and information IEs */ if (chandef.width != NL80211_CHAN_WIDTH_20_NOHT && sband->ht_cap.ht_supported) { - pos = skb_put(skb, 4 + - sizeof(struct ieee80211_ht_cap) + - sizeof(struct ieee80211_ht_operation)); pos = ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap); /* @@ -180,7 +189,6 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, } if (local->hw.queues >= IEEE80211_NUM_ACS) { - pos = skb_put(skb, 9); *pos++ = WLAN_EID_VENDOR_SPECIFIC; *pos++ = 7; /* len */ *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */ @@ -192,7 +200,11 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, *pos++ = 0; /* U-APSD no in use */ } - rcu_assign_pointer(ifibss->presp, skb); + presp->head_len = pos - presp->head; + if (WARN_ON(presp->head_len > frame_len)) + return; + + rcu_assign_pointer(ifibss->presp, presp); sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.beacon_int = beacon_int; @@ -230,7 +242,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL)); bss = cfg80211_inform_bss_frame(local->hw.wiphy, chan, - mgmt, skb->len, 0, GFP_KERNEL); + mgmt, presp->head_len, 0, GFP_KERNEL); cfg80211_put_bss(local->hw.wiphy, bss); netif_carrier_on(sdata->dev); cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); @@ -825,8 +837,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; int tx_last_beacon, len = req->len; struct sk_buff *skb; - struct ieee80211_mgmt *resp; - struct sk_buff *presp; + struct beacon_data *presp; u8 *pos, *end; lockdep_assert_held(&ifibss->mtx); @@ -867,13 +878,15 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, } /* Reply with ProbeResp */ - skb = skb_copy(presp, GFP_KERNEL); + skb = dev_alloc_skb(local->tx_headroom + presp->head_len); if (!skb) return; - resp = (struct ieee80211_mgmt *) skb->data; - memcpy(resp->da, mgmt->sa, ETH_ALEN); - ibss_dbg(sdata, "Sending ProbeResp to %pM\n", resp->da); + skb_reserve(skb, local->tx_headroom); + memcpy(skb_put(skb, presp->head_len), presp->head, presp->head_len); + + memcpy(((struct ieee80211_mgmt *) skb->data)->da, mgmt->sa, ETH_ALEN); + ibss_dbg(sdata, "Sending ProbeResp to %pM\n", mgmt->sa); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; ieee80211_tx_skb(sdata, skb); } @@ -1023,23 +1036,8 @@ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local) int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, struct cfg80211_ibss_params *params) { - struct sk_buff *skb; u32 changed = 0; - skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom + - sizeof(struct ieee80211_hdr_3addr) + - 12 /* struct ieee80211_mgmt.u.beacon */ + - 2 + IEEE80211_MAX_SSID_LEN /* max SSID */ + - 2 + 8 /* max Supported Rates */ + - 3 /* max DS params */ + - 4 /* IBSS params */ + - 2 + (IEEE80211_MAX_SUPP_RATES - 8) + - 2 + sizeof(struct ieee80211_ht_cap) + - 2 + sizeof(struct ieee80211_ht_operation) + - params->ie_len); - if (!skb) - return -ENOMEM; - mutex_lock(&sdata->u.ibss.mtx); if (params->bssid) { @@ -1068,7 +1066,6 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.ie_len = params->ie_len; } - sdata->u.ibss.skb = skb; sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; sdata->u.ibss.ibss_join_req = jiffies; @@ -1104,13 +1101,13 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) { - struct sk_buff *skb; struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct cfg80211_bss *cbss; u16 capability; int active_ibss; struct sta_info *sta; + struct beacon_data *presp; mutex_lock(&sdata->u.ibss.mtx); @@ -1156,8 +1153,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) /* remove beacon */ kfree(sdata->u.ibss.ie); - skb = rcu_dereference_protected(sdata->u.ibss.presp, - lockdep_is_held(&sdata->u.ibss.mtx)); + presp = rcu_dereference_protected(ifibss->presp, + lockdep_is_held(&sdata->u.ibss.mtx)); RCU_INIT_POINTER(sdata->u.ibss.presp, NULL); sdata->vif.bss_conf.ibss_joined = false; sdata->vif.bss_conf.ibss_creator = false; @@ -1166,7 +1163,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_IBSS); synchronize_rcu(); - kfree_skb(skb); + kfree(presp); skb_queue_purge(&sdata->skb_queue); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 55155e3b9b2..c7f8b8b29e5 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -508,8 +508,7 @@ struct ieee80211_if_ibss { unsigned long ibss_join_req; /* probe response/beacon for IBSS */ - struct sk_buff __rcu *presp; - struct sk_buff *skb; + struct beacon_data __rcu *presp; spinlock_t incomplete_lock; struct list_head incomplete_stations; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2a6ae8030bd..4a83d8dea84 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2442,14 +2442,17 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_hdr *hdr; - struct sk_buff *presp = rcu_dereference(ifibss->presp); + struct beacon_data *presp = rcu_dereference(ifibss->presp); if (!presp) goto out; - skb = skb_copy(presp, GFP_ATOMIC); + skb = dev_alloc_skb(local->tx_headroom + presp->head_len); if (!skb) goto out; + skb_reserve(skb, local->tx_headroom); + memcpy(skb_put(skb, presp->head_len), presp->head, + presp->head_len); hdr = (struct ieee80211_hdr *) skb->data; hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | -- cgit v1.2.3-70-g09d2 From 219c38674c262378ec411dd8318ebfd199fbce8d Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Tue, 22 Jan 2013 16:52:23 +0200 Subject: mac80211: allow drivers to set default uAPSD parameters mac80211 currently sets uAPSD parameters to have VO AC trigger- and delivery-enabled, with maximum service period length. Allow drivers to change these default settings since different uAPSD client implementations may handle errors differently and be able to recover from some errors. Note: some APs may not function correctly if one or all ACs are trigger- and delivery-enabled, see http://thread.gmane.org/gmane.linux.kernel.wireless.general/93577. We retested with this AP and later firmware doesn't have this bug any more. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- include/net/mac80211.h | 13 +++++++++++++ net/mac80211/main.c | 2 ++ net/mac80211/mlme.c | 4 ++-- 3 files changed, 17 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9b536172e27..23a275a9a3b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1534,6 +1534,17 @@ enum ieee80211_hw_flags { * @netdev_features: netdev features to be set in each netdev created * from this HW. Note only HW checksum features are currently * compatible with mac80211. Other feature bits will be rejected. + * + * @uapsd_queues: This bitmap is included in (re)association frame to indicate + * for each access category if it is uAPSD trigger-enabled and delivery- + * enabled. Use IEEE80211_WMM_IE_STA_QOSINFO_AC_* to set this bitmap. + * Each bit corresponds to different AC. Value '1' in specific bit means + * that corresponding AC is both trigger- and delivery-enabled. '0' means + * neither enabled. + * + * @uapsd_max_sp_len: maximum number of total buffered frames the WMM AP may + * deliver to a WMM STA during any Service Period triggered by the WMM STA. + * Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct values. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -1559,6 +1570,8 @@ struct ieee80211_hw { u8 radiotap_mcs_details; u16 radiotap_vht_details; netdev_features_t netdev_features; + u8 uapsd_queues; + u8 uapsd_max_sp_len; }; /** diff --git a/net/mac80211/main.c b/net/mac80211/main.c index c6f81ecc36a..b0d28682186 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -587,6 +587,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, IEEE80211_RADIOTAP_MCS_HAVE_BW; local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; + local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; + local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask; wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8b3e852d603..9958cb7df8f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3525,8 +3525,8 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) ifmgd->flags = 0; ifmgd->powersave = sdata->wdev.ps; - ifmgd->uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; - ifmgd->uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; + ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; + ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; ifmgd->p2p_noa_index = -1; mutex_init(&ifmgd->mtx); -- cgit v1.2.3-70-g09d2 From 675a0b049abf6edf30f8dd84c5610b6edc2296c8 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Mon, 25 Mar 2013 16:26:57 +0100 Subject: mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan [fix kernel-doc] Signed-off-by: Johannes Berg --- drivers/net/wireless/adm8211.c | 3 +- drivers/net/wireless/at76c50x-usb.c | 4 +- drivers/net/wireless/ath/ar5523/ar5523.c | 14 ++--- drivers/net/wireless/ath/ath5k/base.c | 2 +- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 4 +- drivers/net/wireless/ath/ath9k/beacon.c | 2 +- drivers/net/wireless/ath/ath9k/calib.c | 2 +- drivers/net/wireless/ath/ath9k/common.c | 5 +- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 16 +++--- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 8 +-- drivers/net/wireless/ath/ath9k/hw.c | 5 +- drivers/net/wireless/ath/ath9k/link.c | 2 +- drivers/net/wireless/ath/ath9k/main.c | 10 ++-- drivers/net/wireless/ath/ath9k/rc.c | 4 +- drivers/net/wireless/ath/ath9k/recv.c | 6 +-- drivers/net/wireless/ath/carl9170/debug.c | 5 +- drivers/net/wireless/ath/carl9170/mac.c | 8 +-- drivers/net/wireless/ath/carl9170/main.c | 9 ++-- drivers/net/wireless/ath/carl9170/phy.c | 4 +- drivers/net/wireless/b43/b43.h | 2 +- drivers/net/wireless/b43/main.c | 8 +-- drivers/net/wireless/b43/phy_ht.c | 5 +- drivers/net/wireless/b43/phy_lcn.c | 5 +- drivers/net/wireless/b43/phy_n.c | 5 +- drivers/net/wireless/b43legacy/main.c | 9 ++-- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 4 +- .../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 6 +-- drivers/net/wireless/brcm80211/brcmsmac/main.c | 4 +- drivers/net/wireless/iwlegacy/3945-rs.c | 2 +- drivers/net/wireless/iwlegacy/4965-rs.c | 2 +- drivers/net/wireless/iwlegacy/common.c | 2 +- drivers/net/wireless/iwlwifi/dvm/rs.c | 2 +- drivers/net/wireless/iwlwifi/dvm/rxon.c | 9 ++-- drivers/net/wireless/libertas_tf/main.c | 8 +-- drivers/net/wireless/mac80211_hwsim.c | 42 +++++++++------ drivers/net/wireless/mwl8k.c | 36 +++++++------ drivers/net/wireless/p54/fwio.c | 4 +- drivers/net/wireless/p54/main.c | 4 +- drivers/net/wireless/p54/txrx.c | 4 +- drivers/net/wireless/rt2x00/rt2800lib.c | 8 +-- drivers/net/wireless/rt2x00/rt2x00config.c | 10 ++-- drivers/net/wireless/rt2x00/rt61pci.c | 2 +- drivers/net/wireless/rt2x00/rt73usb.c | 2 +- drivers/net/wireless/rtl818x/rtl8180/dev.c | 4 +- drivers/net/wireless/rtl818x/rtl8180/grf5101.c | 3 +- drivers/net/wireless/rtl818x/rtl8180/max2820.c | 2 +- drivers/net/wireless/rtl818x/rtl8180/rtl8225.c | 3 +- drivers/net/wireless/rtl818x/rtl8180/sa2400.c | 3 +- drivers/net/wireless/rtl818x/rtl8187/dev.c | 4 +- drivers/net/wireless/rtl818x/rtl8187/rtl8225.c | 3 +- drivers/net/wireless/rtlwifi/base.c | 4 +- drivers/net/wireless/rtlwifi/core.c | 6 +-- drivers/net/wireless/rtlwifi/rtl8192ce/trx.c | 4 +- drivers/net/wireless/rtlwifi/rtl8192cu/trx.c | 8 +-- drivers/net/wireless/rtlwifi/rtl8192de/trx.c | 4 +- drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 4 +- drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 4 +- drivers/net/wireless/ti/wl1251/main.c | 5 +- drivers/net/wireless/ti/wlcore/main.c | 2 +- drivers/net/wireless/zd1211rw/zd_mac.c | 4 +- include/net/mac80211.h | 18 +++---- net/mac80211/cfg.c | 7 +-- net/mac80211/chan.c | 11 ++-- net/mac80211/ieee80211_i.h | 3 +- net/mac80211/main.c | 59 +++++++++++++--------- net/mac80211/mlme.c | 24 ++++++--- net/mac80211/scan.c | 6 +-- net/mac80211/trace.h | 37 +++++++------- net/mac80211/tx.c | 4 +- net/mac80211/util.c | 3 +- 70 files changed, 293 insertions(+), 244 deletions(-) (limited to 'net/mac80211') diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 3d339e04efb..f9a24e599de 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1293,7 +1293,8 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed) { struct adm8211_priv *priv = dev->priv; struct ieee80211_conf *conf = &dev->conf; - int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); if (channel != priv->channel) { priv->channel = channel; diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 5ac5f7ae272..34c8a33cac0 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1943,12 +1943,12 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed) struct at76_priv *priv = hw->priv; at76_dbg(DBG_MAC80211, "%s(): channel %d", - __func__, hw->conf.channel->hw_value); + __func__, hw->conf.chandef.chan->hw_value); at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:"); mutex_lock(&priv->mtx); - priv->channel = hw->conf.channel->hw_value; + priv->channel = hw->conf.chandef.chan->hw_value; if (is_valid_ether_addr(priv->bssid)) at76_join(priv); diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c index afd1e36d308..17d7fece35d 100644 --- a/drivers/net/wireless/ath/ar5523/ar5523.c +++ b/drivers/net/wireless/ath/ar5523/ar5523.c @@ -457,14 +457,14 @@ static int ar5523_set_chan(struct ar5523 *ar) memset(&reset, 0, sizeof(reset)); reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ); reset.flags |= cpu_to_be32(UATH_CHAN_OFDM); - reset.freq = cpu_to_be32(conf->channel->center_freq); + reset.freq = cpu_to_be32(conf->chandef.chan->center_freq); reset.maxrdpower = cpu_to_be32(50); /* XXX */ reset.channelchange = cpu_to_be32(1); reset.keeprccontent = cpu_to_be32(0); ar5523_dbg(ar, "set chan flags 0x%x freq %d\n", be32_to_cpu(reset.flags), - conf->channel->center_freq); + conf->chandef.chan->center_freq); return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0); } @@ -594,7 +594,7 @@ static void ar5523_data_rx_cb(struct urb *urb) rx_status = IEEE80211_SKB_RXCB(data->skb); memset(rx_status, 0, sizeof(*rx_status)); rx_status->freq = be32_to_cpu(desc->channel); - rx_status->band = hw->conf.channel->band; + rx_status->band = hw->conf.chandef.chan->band; rx_status->signal = -95 + be32_to_cpu(desc->rssi); ieee80211_rx_irqsafe(hw, data->skb); @@ -1153,13 +1153,13 @@ static int ar5523_get_wlan_mode(struct ar5523 *ar, struct ieee80211_sta *sta; u32 sta_rate_set; - band = ar->hw->wiphy->bands[ar->hw->conf.channel->band]; + band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); if (!sta) { ar5523_info(ar, "STA not found!\n"); return WLAN_MODE_11b; } - sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band]; + sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band]; for (bit = 0; bit < band->n_bitrates; bit++) { if (sta_rate_set & 1) { @@ -1197,11 +1197,11 @@ static void ar5523_create_rateset(struct ar5523 *ar, ar5523_info(ar, "STA not found. Cannot set rates\n"); sta_rate_set = bss_conf->basic_rates; } else - sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band]; + sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band]; ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set); - band = ar->hw->wiphy->bands[ar->hw->conf.channel->band]; + band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band]; for (bit = 0; bit < band->n_bitrates; bit++) { BUG_ON(i >= AR5523_MAX_NRATES); ar5523_dbg(ar, "Considering rate %d : %d\n", diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 1d264c0f5a9..9b20d9ee271 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2639,7 +2639,7 @@ int ath5k_start(struct ieee80211_hw *hw) * be followed by initialization of the appropriate bits * and then setup of the interrupt mask. */ - ah->curchan = ah->hw->conf.channel; + ah->curchan = ah->hw->conf.chandef.chan; ah->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 4264341533e..06f86f43571 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -202,7 +202,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&ah->lock); if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - ret = ath5k_chan_set(ah, conf->channel); + ret = ath5k_chan_set(ah, conf->chandef.chan); if (ret < 0) goto unlock; } @@ -678,7 +678,7 @@ ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey) memcpy(survey, &ah->survey, sizeof(*survey)); - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->noise = ah->ah_noise_floor; survey->filled = SURVEY_INFO_NOISE_DBM | SURVEY_INFO_CHANNEL_TIME | diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 5f05c26d1ec..2ff570f7f8f 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -79,7 +79,7 @@ static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif, u8 chainmask = ah->txchainmask; u8 rate = 0; - sband = &sc->sbands[common->hw->conf.channel->band]; + sband = &sc->sbands[common->hw->conf.chandef.chan->band]; rate = sband->bitrates[rateidx].hw_value; if (vif->bss_conf.use_short_preamble) rate |= sband->bitrates[rateidx].hw_value_short; diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 1e8508530e9..b184f1ff0d3 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -208,7 +208,7 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah) return true; ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n", - currCal->calData->calType, conf->channel->center_freq); + currCal->calData->calType, conf->chandef.chan->center_freq); ah->caldata->CalValid &= ~currCal->calData->calType; currCal->calState = CAL_WAITING; diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index 905f1b31396..6c78fe7ca54 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -133,13 +133,14 @@ EXPORT_SYMBOL(ath9k_cmn_update_ichannel); struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw, struct ath_hw *ah) { - struct ieee80211_channel *curchan = hw->conf.channel; + struct ieee80211_channel *curchan = hw->conf.chandef.chan; struct ath9k_channel *channel; u8 chan_idx; chan_idx = curchan->hw_value; channel = &ah->channels[chan_idx]; - ath9k_cmn_update_ichannel(channel, curchan, hw->conf.channel_type); + ath9k_cmn_update_ichannel(channel, curchan, + cfg80211_get_chandef_type(&hw->conf.chandef)); return channel; } diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index a8016d70088..098e3545e51 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -190,7 +190,7 @@ void ath9k_htc_reset(struct ath9k_htc_priv *priv) { struct ath_hw *ah = priv->ah; struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_channel *channel = priv->hw->conf.channel; + struct ieee80211_channel *channel = priv->hw->conf.chandef.chan; struct ath9k_hw_cal_data *caldata = NULL; enum htc_phymode mode; __be16 htc_mode; @@ -250,7 +250,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv, struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_conf *conf = &common->hw->conf; bool fastcc; - struct ieee80211_channel *channel = hw->conf.channel; + struct ieee80211_channel *channel = hw->conf.chandef.chan; struct ath9k_hw_cal_data *caldata = NULL; enum htc_phymode mode; __be16 htc_mode; @@ -602,7 +602,7 @@ static void ath9k_htc_setup_rate(struct ath9k_htc_priv *priv, u32 caps = 0; int i, j; - sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band]; + sband = priv->hw->wiphy->bands[priv->hw->conf.chandef.chan->band]; for (i = 0, j = 0; i < sband->n_bitrates; i++) { if (sta->supp_rates[sband->band] & BIT(i)) { @@ -904,7 +904,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) struct ath9k_htc_priv *priv = hw->priv; struct ath_hw *ah = priv->ah; struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_channel *curchan = hw->conf.channel; + struct ieee80211_channel *curchan = hw->conf.chandef.chan; struct ath9k_channel *init_channel; int ret = 0; enum htc_phymode mode; @@ -1193,15 +1193,17 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) } if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || chip_reset) { - struct ieee80211_channel *curchan = hw->conf.channel; + struct ieee80211_channel *curchan = hw->conf.chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&hw->conf.chandef); int pos = curchan->hw_value; ath_dbg(common, CONFIG, "Set channel: %d MHz\n", curchan->center_freq); ath9k_cmn_update_ichannel(&priv->ah->channels[pos], - hw->conf.channel, - hw->conf.channel_type); + hw->conf.chandef.chan, + channel_type); if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) { ath_err(common, "Unable to set channel\n"); diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 3ad1fd05c5e..306c55019e7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -490,7 +490,7 @@ static void ath9k_htc_tx_process(struct ath9k_htc_priv *priv, if (txs->ts_flags & ATH9K_HTC_TXSTAT_SGI) rate->flags |= IEEE80211_TX_RC_SHORT_GI; } else { - if (cur_conf->channel->band == IEEE80211_BAND_5GHZ) + if (cur_conf->chandef.chan->band == IEEE80211_BAND_5GHZ) rate->idx += 4; /* No CCK rates */ } @@ -939,7 +939,7 @@ static void ath9k_process_rate(struct ieee80211_hw *hw, return; } - band = hw->conf.channel->band; + band = hw->conf.chandef.chan->band; sband = hw->wiphy->bands[band]; for (i = 0; i < sband->n_bitrates; i++) { @@ -1078,8 +1078,8 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv, priv->ah->stats.avgbrssi = rxbuf->rxstatus.rs_rssi; rx_status->mactime = be64_to_cpu(rxbuf->rxstatus.rs_tstamp); - rx_status->band = hw->conf.channel->band; - rx_status->freq = hw->conf.channel->center_freq; + rx_status->band = hw->conf.chandef.chan->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; rx_status->signal = rxbuf->rxstatus.rs_rssi + ATH_DEFAULT_NOISE_FLOOR; rx_status->antenna = rxbuf->rxstatus.rs_antenna; rx_status->flag |= RX_FLAG_MACTIME_END; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 2a2ae403e0e..d5e6a38fe74 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -139,7 +139,7 @@ static void ath9k_hw_set_clockrate(struct ath_hw *ah) clockrate = 117; else if (!ah->curchan) /* should really check for CCK instead */ clockrate = ATH9K_CLOCK_RATE_CCK; - else if (conf->channel->band == IEEE80211_BAND_2GHZ) + else if (conf->chandef.chan->band == IEEE80211_BAND_2GHZ) clockrate = ATH9K_CLOCK_RATE_2GHZ_OFDM; else if (ah->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK) clockrate = ATH9K_CLOCK_FAST_RATE_5GHZ_OFDM; @@ -1110,7 +1110,8 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) * BA frames in some implementations, but it has been found to fix ACK * timeout issues in other cases as well. */ - if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ && + if (conf->chandef.chan && + conf->chandef.chan->band == IEEE80211_BAND_2GHZ && !IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) { acktimeout += 64 - sifstime - ah->slottime; ctstimeout += 48 - sifstime - ah->slottime; diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index ade3afb21f9..b1433f561cd 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -213,7 +213,7 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int txctl.txq = sc->tx.txq_map[IEEE80211_AC_BE]; memset(tx_info, 0, sizeof(*tx_info)); - tx_info->band = hw->conf.channel->band; + tx_info->band = hw->conf.chandef.chan->band; tx_info->flags |= IEEE80211_TX_CTL_NO_ACK; tx_info->control.rates[0].idx = 0; tx_info->control.rates[0].count = 1; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 24650fd4169..f984a03f912 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -585,7 +585,7 @@ static int ath9k_start(struct ieee80211_hw *hw) struct ath_softc *sc = hw->priv; struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - struct ieee80211_channel *curchan = hw->conf.channel; + struct ieee80211_channel *curchan = hw->conf.chandef.chan; struct ath9k_channel *init_channel; int r; @@ -1184,7 +1184,9 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) } if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { - struct ieee80211_channel *curchan = hw->conf.channel; + struct ieee80211_channel *curchan = hw->conf.chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&conf->chandef); int pos = curchan->hw_value; int old_pos = -1; unsigned long flags; @@ -1193,7 +1195,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) old_pos = ah->curchan - &ah->channels[0]; ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n", - curchan->center_freq, conf->channel_type); + curchan->center_freq, channel_type); /* update survey stats for the old channel before switching */ spin_lock_irqsave(&common->cc_lock, flags); @@ -1208,7 +1210,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) ath9k_hw_getnf(ah, ah->curchan); ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos], - curchan, conf->channel_type); + curchan, channel_type); /* * If the operating channel changes, change the survey in-use flags diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 96ac433ba7f..aa4d368d8d3 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -814,7 +814,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, * So, set fourth rate in series to be same as third one for * above conditions. */ - if ((sc->hw->conf.channel->band == IEEE80211_BAND_2GHZ) && + if ((sc->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) && (conf_is_ht(&sc->hw->conf))) { u8 dot11rate = rate_table->info[rix].dot11rate; u8 phy = rate_table->info[rix].phy; @@ -1328,7 +1328,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband, ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG, "Operating HT Bandwidth changed to: %d\n", - sc->hw->conf.channel_type); + cfg80211_get_chandef_type(&sc->hw->conf.chandef)); } } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index ee156e54314..c90ca57e372 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -859,7 +859,7 @@ static int ath9k_process_rate(struct ath_common *common, unsigned int i = 0; struct ath_softc __maybe_unused *sc = common->priv; - band = hw->conf.channel->band; + band = hw->conf.chandef.chan->band; sband = hw->wiphy->bands[band]; if (rx_stats->rs_rate & 0x80) { @@ -954,8 +954,8 @@ static int ath9k_rx_skb_preprocess(struct ath_common *common, if (ath9k_process_rate(common, hw, rx_stats, rx_status)) return -EINVAL; - rx_status->band = hw->conf.channel->band; - rx_status->freq = hw->conf.channel->center_freq; + rx_status->band = hw->conf.chandef.chan->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; rx_status->signal = ah->noise + rx_stats->rs_rssi; rx_status->antenna = rx_stats->rs_antenna; rx_status->flag |= RX_FLAG_MACTIME_END; diff --git a/drivers/net/wireless/ath/carl9170/debug.c b/drivers/net/wireless/ath/carl9170/debug.c index 93fe6003a49..7741fe8e081 100644 --- a/drivers/net/wireless/ath/carl9170/debug.c +++ b/drivers/net/wireless/ath/carl9170/debug.c @@ -654,8 +654,9 @@ static ssize_t carl9170_debugfs_bug_write(struct ar9170 *ar, const char *buf, goto out; case 'P': - err = carl9170_set_channel(ar, ar->hw->conf.channel, - ar->hw->conf.channel_type, CARL9170_RFI_COLD); + err = carl9170_set_channel(ar, ar->hw->conf.chandef.chan, + cfg80211_get_chandef_type(&ar->hw->conf.chandef), + CARL9170_RFI_COLD); if (err < 0) count = err; diff --git a/drivers/net/wireless/ath/carl9170/mac.c b/drivers/net/wireless/ath/carl9170/mac.c index 24d75ab94f0..a2f005703c0 100644 --- a/drivers/net/wireless/ath/carl9170/mac.c +++ b/drivers/net/wireless/ath/carl9170/mac.c @@ -48,7 +48,7 @@ int carl9170_set_dyn_sifs_ack(struct ar9170 *ar) if (conf_is_ht40(&ar->hw->conf)) val = 0x010a; else { - if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) + if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) val = 0x105; else val = 0x104; @@ -66,7 +66,7 @@ int carl9170_set_rts_cts_rate(struct ar9170 *ar) rts_rate = 0x1da; cts_rate = 0x10a; } else { - if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) { + if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) { /* 11 mbit CCK */ rts_rate = 033; cts_rate = 003; @@ -93,7 +93,7 @@ int carl9170_set_slot_time(struct ar9170 *ar) return 0; } - if ((ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) || + if ((ar->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) || vif->bss_conf.use_short_slot) slottime = 9; @@ -120,7 +120,7 @@ int carl9170_set_mac_rates(struct ar9170 *ar) basic |= (vif->bss_conf.basic_rates & 0xff0) << 4; rcu_read_unlock(); - if (ar->hw->conf.channel->band == IEEE80211_BAND_5GHZ) + if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) mandatory = 0xff00; /* OFDM 6/9/12/18/24/36/48/54 */ else mandatory = 0xff0f; /* OFDM (6/9../54) + CCK (1/2/5.5/11) */ diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 08b19319994..4e268b1360d 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -929,6 +929,9 @@ static int carl9170_op_config(struct ieee80211_hw *hw, u32 changed) } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&hw->conf.chandef); + /* adjust slot time for 5 GHz */ err = carl9170_set_slot_time(ar); if (err) @@ -938,8 +941,8 @@ static int carl9170_op_config(struct ieee80211_hw *hw, u32 changed) if (err) goto out; - err = carl9170_set_channel(ar, hw->conf.channel, - hw->conf.channel_type, CARL9170_RFI_NONE); + err = carl9170_set_channel(ar, hw->conf.chandef.chan, + channel_type, CARL9170_RFI_NONE); if (err) goto out; @@ -957,7 +960,7 @@ static int carl9170_op_config(struct ieee80211_hw *hw, u32 changed) } if (changed & IEEE80211_CONF_CHANGE_POWER) { - err = carl9170_set_mac_tpc(ar, ar->hw->conf.channel); + err = carl9170_set_mac_tpc(ar, ar->hw->conf.chandef.chan); if (err) goto out; } diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c index b72c09cf43a..c5f1fdd1eae 100644 --- a/drivers/net/wireless/ath/carl9170/phy.c +++ b/drivers/net/wireless/ath/carl9170/phy.c @@ -1331,7 +1331,7 @@ static void carl9170_calc_ctl(struct ar9170 *ar, u32 freq, enum carl9170_bw bw) * CTL_ETSI for 2GHz and CTL_FCC for 5GHz. */ ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory, - ar->hw->conf.channel->band); + ar->hw->conf.chandef.chan->band); /* ctl group not found - either invalid band (NO_CTL) or ww roaming */ if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL) @@ -1341,7 +1341,7 @@ static void carl9170_calc_ctl(struct ar9170 *ar, u32 freq, enum carl9170_bw bw) /* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */ return; - if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) { + if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) { modes = mode_list_2ghz; nr_modes = ARRAY_SIZE(mode_list_2ghz); } else { diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 10e288d470e..6a4bd8c433b 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -972,7 +972,7 @@ static inline int b43_is_mode(struct b43_wl *wl, int type) */ static inline enum ieee80211_band b43_current_band(struct b43_wl *wl) { - return wl->hw->conf.channel->band; + return wl->hw->conf.chandef.chan->band; } static inline int b43_bus_may_powerdown(struct b43_wldev *wldev) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 05682736e46..d135e8975f5 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3848,7 +3848,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) dev = wl->current_dev; /* Switch the band (if necessary). This might change the active core. */ - err = b43_switch_band(wl, conf->channel); + err = b43_switch_band(wl, conf->chandef.chan); if (err) goto out_unlock_mutex; @@ -3878,8 +3878,8 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed) /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ - if (conf->channel->hw_value != phy->channel) - b43_switch_channel(dev, conf->channel->hw_value); + if (conf->chandef.chan->hw_value != phy->channel) + b43_switch_channel(dev, conf->chandef.chan->hw_value); dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR); @@ -5002,7 +5002,7 @@ static int b43_op_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->filled = SURVEY_INFO_NOISE_DBM; survey->noise = dev->stats.link_noise; diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c index 7416c5e9154..016682ea744 100644 --- a/drivers/net/wireless/b43/phy_ht.c +++ b/drivers/net/wireless/b43/phy_ht.c @@ -525,8 +525,9 @@ static void b43_phy_ht_op_switch_analog(struct b43_wldev *dev, bool on) static int b43_phy_ht_op_switch_channel(struct b43_wldev *dev, unsigned int new_channel) { - struct ieee80211_channel *channel = dev->wl->hw->conf.channel; - enum nl80211_channel_type channel_type = dev->wl->hw->conf.channel_type; + struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&dev->wl->hw->conf.chandef); if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { if ((new_channel < 1) || (new_channel > 14)) diff --git a/drivers/net/wireless/b43/phy_lcn.c b/drivers/net/wireless/b43/phy_lcn.c index a13e28ef624..0bafa3b1703 100644 --- a/drivers/net/wireless/b43/phy_lcn.c +++ b/drivers/net/wireless/b43/phy_lcn.c @@ -808,8 +808,9 @@ static void b43_phy_lcn_op_switch_analog(struct b43_wldev *dev, bool on) static int b43_phy_lcn_op_switch_channel(struct b43_wldev *dev, unsigned int new_channel) { - struct ieee80211_channel *channel = dev->wl->hw->conf.channel; - enum nl80211_channel_type channel_type = dev->wl->hw->conf.channel_type; + struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&dev->wl->hw->conf.chandef); if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { if ((new_channel < 1) || (new_channel > 14)) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 3c35382ee6c..949a3bdeede 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -5530,8 +5530,9 @@ static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on) static int b43_nphy_op_switch_channel(struct b43_wldev *dev, unsigned int new_channel) { - struct ieee80211_channel *channel = dev->wl->hw->conf.channel; - enum nl80211_channel_type channel_type = dev->wl->hw->conf.channel_type; + struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&dev->wl->hw->conf.chandef); if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { if ((new_channel < 1) || (new_channel > 14)) diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 8c3f70e1a01..57266882186 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2720,7 +2720,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, goto out_unlock_mutex; /* Switch the PHY mode (if necessary). */ - switch (conf->channel->band) { + switch (conf->chandef.chan->band) { case IEEE80211_BAND_2GHZ: if (phy->type == B43legacy_PHYTYPE_B) new_phymode = B43legacy_PHYMODE_B; @@ -2748,8 +2748,9 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw, /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ - if (conf->channel->hw_value != phy->channel) - b43legacy_radio_selectchannel(dev, conf->channel->hw_value, 0); + if (conf->chandef.chan->hw_value != phy->channel) + b43legacy_radio_selectchannel(dev, conf->chandef.chan->hw_value, + 0); dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR); @@ -3558,7 +3559,7 @@ static int b43legacy_op_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->filled = SURVEY_INFO_NOISE_DBM; survey->noise = dev->stats.link_noise; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 10ee314c422..cc87926f505 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -379,7 +379,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec, u8 local_constraint_qdbm) { struct brcms_c_info *wlc = wlc_cm->wlc; - struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; + struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.chandef.chan; struct txpwr_limits txpwr; brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr); @@ -404,7 +404,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec, struct txpwr_limits *txpwr) { struct brcms_c_info *wlc = wlc_cm->wlc; - struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; + struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.chandef.chan; uint i; uint chan; int maxpwr; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index aa5f43fee5e..70731d23ddb 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -414,10 +414,10 @@ static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed) new_int); } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - if (conf->channel_type == NL80211_CHAN_HT20 || - conf->channel_type == NL80211_CHAN_NO_HT) + if (conf->chandef.width == NL80211_CHAN_WIDTH_20 || + conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT) err = brcms_c_set_channel(wl->wlc, - conf->channel->hw_value); + conf->chandef.chan->hw_value); else err = -ENOTSUPP; } diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 8ef02dca8f8..e0dc1838cd1 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -5099,7 +5099,7 @@ int brcms_c_up(struct brcms_c_info *wlc) wlc->pub->up = true; if (wlc->bandinit_pending) { - ch = wlc->pub->ieee_hw->conf.channel; + ch = wlc->pub->ieee_hw->conf.chandef.chan; brcms_c_suspend_mac_and_wait(wlc); brcms_c_set_chanspec(wlc, ch20mhz_chspec(ch->hw_value)); wlc->bandinit_pending = false; @@ -7748,7 +7748,7 @@ bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded) void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx) { struct bcma_device *core = wlc->hw->d11core; - struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel; + struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.chandef.chan; u16 chanspec; brcms_dbg_info(core, "wl%d\n", wlc->pub->unit); diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c index d4fd29ad90d..c9f197d9ca1 100644 --- a/drivers/net/wireless/iwlegacy/3945-rs.c +++ b/drivers/net/wireless/iwlegacy/3945-rs.c @@ -347,7 +347,7 @@ il3945_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id) psta = (struct il3945_sta_priv *)sta->drv_priv; rs_sta = &psta->rs_sta; - sband = hw->wiphy->bands[conf->channel->band]; + sband = hw->wiphy->bands[conf->chandef.chan->band]; rs_sta->il = il; diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index e8324b5e5bf..1d92a59a85a 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2299,7 +2299,7 @@ il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id) sta_priv = (struct il_station_priv *)sta->drv_priv; lq_sta = &sta_priv->lq_sta; - sband = hw->wiphy->bands[conf->channel->band]; + sband = hw->wiphy->bands[conf->chandef.chan->band]; lq_sta->lq.sta_id = sta_id; diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 722bfb57cfd..025d8b0eeaf 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -4974,7 +4974,7 @@ il_mac_config(struct ieee80211_hw *hw, u32 changed) struct il_priv *il = hw->priv; const struct il_channel_info *ch_info; struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = conf->channel; + struct ieee80211_channel *channel = conf->chandef.chan; struct il_ht_config *ht_conf = &il->current_ht_config; unsigned long flags = 0; int ret = 0; diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index abe30426726..907bd6e50aa 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -2831,7 +2831,7 @@ void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_i sta_priv = (struct iwl_station_priv *) sta->drv_priv; lq_sta = &sta_priv->lq_sta; - sband = hw->wiphy->bands[conf->channel->band]; + sband = hw->wiphy->bands[conf->chandef.chan->band]; lq_sta->lq.sta_id = sta_id; diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 23be948cf16..085c589e714 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -78,8 +78,9 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; #endif - ctx->staging.channel = cpu_to_le16(priv->hw->conf.channel->hw_value); - priv->band = priv->hw->conf.channel->band; + ctx->staging.channel = + cpu_to_le16(priv->hw->conf.chandef.chan->hw_value); + priv->band = priv->hw->conf.chandef.chan->band; iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif); @@ -951,7 +952,7 @@ static void iwl_calc_basic_rates(struct iwl_priv *priv, unsigned long basic = ctx->vif->bss_conf.basic_rates; int i; - sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band]; + sband = priv->hw->wiphy->bands[priv->hw->conf.chandef.chan->band]; for_each_set_bit(i, &basic, BITS_PER_LONG) { int hw = sband->bitrates[i].hw_value; @@ -1181,7 +1182,7 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); struct iwl_rxon_context *ctx; struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = conf->channel; + struct ieee80211_channel *channel = conf->chandef.chan; int ret = 0; IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed); diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 7001856241e..088de9d25c3 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -412,9 +412,9 @@ static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed) struct ieee80211_conf *conf = &hw->conf; lbtf_deb_enter(LBTF_DEB_MACOPS); - if (conf->channel->center_freq != priv->cur_freq) { - priv->cur_freq = conf->channel->center_freq; - lbtf_set_channel(priv, conf->channel->hw_value); + if (conf->chandef.chan->center_freq != priv->cur_freq) { + priv->cur_freq = conf->chandef.chan->center_freq; + lbtf_set_channel(priv, conf->chandef.chan->hw_value); } lbtf_deb_leave(LBTF_DEB_MACOPS); return 0; @@ -537,7 +537,7 @@ static int lbtf_op_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->filled = SURVEY_INFO_NOISE_DBM; survey->noise = priv->noise; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 0064d38276b..4ac54861e91 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1062,11 +1062,13 @@ out: return HRTIMER_NORESTART; } -static const char *hwsim_chantypes[] = { - [NL80211_CHAN_NO_HT] = "noht", - [NL80211_CHAN_HT20] = "ht20", - [NL80211_CHAN_HT40MINUS] = "ht40-", - [NL80211_CHAN_HT40PLUS] = "ht40+", +static const char * const hwsim_chanwidths[] = { + [NL80211_CHAN_WIDTH_20_NOHT] = "noht", + [NL80211_CHAN_WIDTH_20] = "ht20", + [NL80211_CHAN_WIDTH_40] = "ht40", + [NL80211_CHAN_WIDTH_80] = "vht80", + [NL80211_CHAN_WIDTH_80P80] = "vht80p80", + [NL80211_CHAN_WIDTH_160] = "vht160", }; static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) @@ -1080,18 +1082,28 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) [IEEE80211_SMPS_DYNAMIC] = "dynamic", }; - wiphy_debug(hw->wiphy, - "%s (freq=%d/%s idle=%d ps=%d smps=%s)\n", - __func__, - conf->channel ? conf->channel->center_freq : 0, - hwsim_chantypes[conf->channel_type], - !!(conf->flags & IEEE80211_CONF_IDLE), - !!(conf->flags & IEEE80211_CONF_PS), - smps_modes[conf->smps_mode]); + if (conf->chandef.chan) + wiphy_debug(hw->wiphy, + "%s (freq=%d(%d - %d)/%s idle=%d ps=%d smps=%s)\n", + __func__, + conf->chandef.chan->center_freq, + conf->chandef.center_freq1, + conf->chandef.center_freq2, + hwsim_chanwidths[conf->chandef.width], + !!(conf->flags & IEEE80211_CONF_IDLE), + !!(conf->flags & IEEE80211_CONF_PS), + smps_modes[conf->smps_mode]); + else + wiphy_debug(hw->wiphy, + "%s (freq=0 idle=%d ps=%d smps=%s)\n", + __func__, + !!(conf->flags & IEEE80211_CONF_IDLE), + !!(conf->flags & IEEE80211_CONF_PS), + smps_modes[conf->smps_mode]); data->idle = !!(conf->flags & IEEE80211_CONF_IDLE); - data->channel = conf->channel; + data->channel = conf->chandef.chan; WARN_ON(data->channel && channels > 1); @@ -1277,7 +1289,7 @@ static int mac80211_hwsim_get_survey( return -ENOENT; /* Current channel */ - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; /* * Magically conjured noise level --- this is only ok for simulated hardware. diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 091d9a64080..9f9a1449e81 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -2837,7 +2837,9 @@ static int mwl8k_cmd_tx_power(struct ieee80211_hw *hw, struct ieee80211_conf *conf, unsigned short pwr) { - struct ieee80211_channel *channel = conf->channel; + struct ieee80211_channel *channel = conf->chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&conf->chandef); struct mwl8k_cmd_tx_power *cmd; int rc; int i; @@ -2857,14 +2859,14 @@ static int mwl8k_cmd_tx_power(struct ieee80211_hw *hw, cmd->channel = cpu_to_le16(channel->hw_value); - if (conf->channel_type == NL80211_CHAN_NO_HT || - conf->channel_type == NL80211_CHAN_HT20) { + if (channel_type == NL80211_CHAN_NO_HT || + channel_type == NL80211_CHAN_HT20) { cmd->bw = cpu_to_le16(0x2); } else { cmd->bw = cpu_to_le16(0x4); - if (conf->channel_type == NL80211_CHAN_HT40MINUS) + if (channel_type == NL80211_CHAN_HT40MINUS) cmd->sub_ch = cpu_to_le16(0x3); - else if (conf->channel_type == NL80211_CHAN_HT40PLUS) + else if (channel_type == NL80211_CHAN_HT40PLUS) cmd->sub_ch = cpu_to_le16(0x1); } @@ -3008,7 +3010,9 @@ struct mwl8k_cmd_set_rf_channel { static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { - struct ieee80211_channel *channel = conf->channel; + struct ieee80211_channel *channel = conf->chandef.chan; + enum nl80211_channel_type channel_type = + cfg80211_get_chandef_type(&conf->chandef); struct mwl8k_cmd_set_rf_channel *cmd; int rc; @@ -3026,12 +3030,12 @@ static int mwl8k_cmd_set_rf_channel(struct ieee80211_hw *hw, else if (channel->band == IEEE80211_BAND_5GHZ) cmd->channel_flags |= cpu_to_le32(0x00000004); - if (conf->channel_type == NL80211_CHAN_NO_HT || - conf->channel_type == NL80211_CHAN_HT20) + if (channel_type == NL80211_CHAN_NO_HT || + channel_type == NL80211_CHAN_HT20) cmd->channel_flags |= cpu_to_le32(0x00000080); - else if (conf->channel_type == NL80211_CHAN_HT40MINUS) + else if (channel_type == NL80211_CHAN_HT40MINUS) cmd->channel_flags |= cpu_to_le32(0x000001900); - else if (conf->channel_type == NL80211_CHAN_HT40PLUS) + else if (channel_type == NL80211_CHAN_HT40PLUS) cmd->channel_flags |= cpu_to_le32(0x000000900); rc = mwl8k_post_cmd(hw, &cmd->header); @@ -3950,7 +3954,7 @@ static int mwl8k_cmd_set_new_stn_add(struct ieee80211_hw *hw, memcpy(cmd->mac_addr, sta->addr, ETH_ALEN); cmd->stn_id = cpu_to_le16(sta->aid); cmd->action = cpu_to_le16(MWL8K_STA_ACTION_ADD); - if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) + if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) rates = sta->supp_rates[IEEE80211_BAND_2GHZ]; else rates = sta->supp_rates[IEEE80211_BAND_5GHZ] << 5; @@ -4385,7 +4389,7 @@ static int mwl8k_cmd_update_stadb_add(struct ieee80211_hw *hw, p->ht_caps = cpu_to_le16(sta->ht_cap.cap); p->extended_ht_caps = (sta->ht_cap.ampdu_factor & 3) | ((sta->ht_cap.ampdu_density & 7) << 2); - if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) + if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) rates = sta->supp_rates[IEEE80211_BAND_2GHZ]; else rates = sta->supp_rates[IEEE80211_BAND_5GHZ] << 5; @@ -4868,7 +4872,7 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif, goto out; } - if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) { + if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) { ap_legacy_rates = ap->supp_rates[IEEE80211_BAND_2GHZ]; } else { ap_legacy_rates = @@ -4900,7 +4904,7 @@ mwl8k_bss_info_changed_sta(struct ieee80211_hw *hw, struct ieee80211_vif *vif, if (idx) idx--; - if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) + if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) rate = mwl8k_rates_24[idx].hw_value; else rate = mwl8k_rates_50[idx].hw_value; @@ -4973,7 +4977,7 @@ mwl8k_bss_info_changed_ap(struct ieee80211_hw *hw, struct ieee80211_vif *vif, if (idx) idx--; - if (hw->conf.channel->band == IEEE80211_BAND_2GHZ) + if (hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ) rate = mwl8k_rates_24[idx].hw_value; else rate = mwl8k_rates_50[idx].hw_value; @@ -5246,7 +5250,7 @@ static int mwl8k_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->filled = SURVEY_INFO_NOISE_DBM; survey->noise = priv->noise; diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c index 9ba85106eec..b3879fbf536 100644 --- a/drivers/net/wireless/p54/fwio.c +++ b/drivers/net/wireless/p54/fwio.c @@ -402,7 +402,7 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell) struct p54_rssi_db_entry *rssi_data; unsigned int i; void *entry; - __le16 freq = cpu_to_le16(priv->hw->conf.channel->center_freq); + __le16 freq = cpu_to_le16(priv->hw->conf.chandef.chan->center_freq); skb = p54_alloc_skb(priv, P54_HDR_FLAG_CONTROL_OPSET, sizeof(*head) + 2 + sizeof(*iq_autocal) + sizeof(*body) + @@ -532,7 +532,7 @@ int p54_scan(struct p54_common *priv, u16 mode, u16 dwell) err: wiphy_err(priv->hw->wiphy, "frequency change to channel %d failed.\n", ieee80211_frequency_to_channel( - priv->hw->conf.channel->center_freq)); + priv->hw->conf.chandef.chan->center_freq)); dev_kfree_skb_any(skb); return -EINVAL; diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index ee654a691f3..067e6f2fd05 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -340,7 +340,7 @@ static int p54_config(struct ieee80211_hw *dev, u32 changed) * TODO: Use the LM_SCAN_TRAP to determine the current * operating channel. */ - priv->curchan = priv->hw->conf.channel; + priv->curchan = priv->hw->conf.chandef.chan; p54_reset_stats(priv); WARN_ON(p54_fetch_statistics(priv)); } @@ -480,7 +480,7 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev, p54_set_edcf(priv); } if (changed & BSS_CHANGED_BASIC_RATES) { - if (dev->conf.channel->band == IEEE80211_BAND_5GHZ) + if (dev->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) priv->basic_rate_mask = (info->basic_rates << 4); else priv->basic_rate_mask = info->basic_rates; diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index 12f0a34477f..f95de0d1621 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -354,13 +354,13 @@ static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb) rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi); if (hdr->rate & 0x10) rx_status->flag |= RX_FLAG_SHORTPRE; - if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ) + if (priv->hw->conf.chandef.chan->band == IEEE80211_BAND_5GHZ) rx_status->rate_idx = (rate < 4) ? 0 : rate - 4; else rx_status->rate_idx = rate; rx_status->freq = freq; - rx_status->band = priv->hw->conf.channel->band; + rx_status->band = priv->hw->conf.chandef.chan->band; rx_status->antenna = hdr->antenna; tsf32 = le32_to_cpu(hdr->tsf32); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index a658b4bc7da..34456b45acb 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2763,7 +2763,7 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev) { - rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.channel, + rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan, rt2x00dev->tx_power); } EXPORT_SYMBOL_GPL(rt2800_gain_calibration); @@ -2898,11 +2898,11 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev, if (flags & IEEE80211_CONF_CHANGE_CHANNEL) { rt2800_config_channel(rt2x00dev, libconf->conf, &libconf->rf, &libconf->channel); - rt2800_config_txpower(rt2x00dev, libconf->conf->channel, + rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan, libconf->conf->power_level); } if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800_config_txpower(rt2x00dev, libconf->conf->channel, + rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan, libconf->conf->power_level); if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) rt2800_config_retry_limit(rt2x00dev, libconf); @@ -5563,7 +5563,7 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; rt2800_register_read(rt2x00dev, CH_IDLE_STA, &idle); rt2800_register_read(rt2x00dev, CH_BUSY_STA, &busy); diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 49a63e97393..8cb43f8f3ef 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -184,7 +184,7 @@ static u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev, /* * Initialize center channel to current channel. */ - center_channel = spec->channels[conf->channel->hw_value].channel; + center_channel = spec->channels[conf->chandef.chan->hw_value].channel; /* * Adjust center channel to HT40+ and HT40- operation. @@ -199,7 +199,7 @@ static u16 rt2x00ht_center_channel(struct rt2x00_dev *rt2x00dev, return i; WARN_ON(1); - return conf->channel->hw_value; + return conf->chandef.chan->hw_value; } void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, @@ -227,7 +227,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, hw_value = rt2x00ht_center_channel(rt2x00dev, conf); } else { clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags); - hw_value = conf->channel->hw_value; + hw_value = conf->chandef.chan->hw_value; } memcpy(&libconf.rf, @@ -279,8 +279,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, else clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); - rt2x00dev->curr_band = conf->channel->band; - rt2x00dev->curr_freq = conf->channel->center_freq; + rt2x00dev->curr_band = conf->chandef.chan->band; + rt2x00dev->curr_freq = conf->chandef.chan->center_freq; rt2x00dev->tx_power = conf->power_level; rt2x00dev->short_retry = conf->short_frame_max_tx_count; rt2x00dev->long_retry = conf->long_frame_max_tx_count; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f95792cfcf8..f85035cc836 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -847,7 +847,7 @@ static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev, u16 eeprom; short lna_gain = 0; - if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) { + if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) lna_gain += 14; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 24eec66e9fd..a3387b146bb 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -739,7 +739,7 @@ static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev, u16 eeprom; short lna_gain = 0; - if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) { + if (libconf->conf->chandef.chan->band == IEEE80211_BAND_2GHZ) { if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) lna_gain += 14; diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 1b3c2843221..91a04e2b8ec 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -147,8 +147,8 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) signal = priv->rf->calc_rssi(agc, sq); } rx_status.signal = signal; - rx_status.freq = dev->conf.channel->center_freq; - rx_status.band = dev->conf.channel->band; + rx_status.freq = dev->conf.chandef.chan->center_freq; + rx_status.band = dev->conf.chandef.chan->band; rx_status.mactime = le64_to_cpu(entry->tsft); rx_status.flag |= RX_FLAG_MACTIME_START; if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) diff --git a/drivers/net/wireless/rtl818x/rtl8180/grf5101.c b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c index 5ee7589dd54..077ff92cc13 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/grf5101.c +++ b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c @@ -82,7 +82,8 @@ static void grf5101_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8180_priv *priv = dev->priv; - int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; u32 chan = channel - 1; diff --git a/drivers/net/wireless/rtl818x/rtl8180/max2820.c b/drivers/net/wireless/rtl818x/rtl8180/max2820.c index 667b3363d43..4715000c94d 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/max2820.c +++ b/drivers/net/wireless/rtl818x/rtl8180/max2820.c @@ -95,7 +95,7 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, { struct rtl8180_priv *priv = dev->priv; int channel = conf ? - ieee80211_frequency_to_channel(conf->channel->center_freq) : 1; + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq) : 1; unsigned int chan_idx = channel - 1; u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; u32 chan = max2820_chan[chan_idx]; diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c index 7c4574ba9d7..cc2a5412c1f 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c @@ -719,7 +719,8 @@ static void rtl8225_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8180_priv *priv = dev->priv; - int chan = ieee80211_frequency_to_channel(conf->channel->center_freq); + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); if (priv->rf->init == rtl8225_rf_init) rtl8225_rf_set_tx_power(dev, chan); diff --git a/drivers/net/wireless/rtl818x/rtl8180/sa2400.c b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c index 44771a6286a..b3ec40f6bd2 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/sa2400.c +++ b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c @@ -105,7 +105,8 @@ static void sa2400_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8180_priv *priv = dev->priv; - int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; u32 chan = sa2400_chan[channel - 1]; diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index 4574bd21370..f49220e234b 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -379,8 +379,8 @@ static void rtl8187_rx_cb(struct urb *urb) rate = (flags >> 20) & 0xF; skb_trim(skb, flags & 0x0FFF); rx_status.rate_idx = rate; - rx_status.freq = dev->conf.channel->center_freq; - rx_status.band = dev->conf.channel->band; + rx_status.freq = dev->conf.chandef.chan->center_freq; + rx_status.band = dev->conf.chandef.chan->band; rx_status.flag |= RX_FLAG_MACTIME_START; if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c index 908903f721f..f0bf35fedba 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c @@ -905,7 +905,8 @@ static void rtl8225_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8187_priv *priv = dev->priv; - int chan = ieee80211_frequency_to_channel(conf->channel->center_freq); + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); if (priv->rf->init == rtl8225_rf_init) rtl8225_rf_set_tx_power(dev, chan); diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 99c5cea3fe2..0e7866d1d0e 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -691,7 +691,7 @@ int rtlwifi_rate_mapping(struct ieee80211_hw *hw, int rate_idx; if (false == isht) { - if (IEEE80211_BAND_2GHZ == hw->conf.channel->band) { + if (IEEE80211_BAND_2GHZ == hw->conf.chandef.chan->band) { switch (desc_rate) { case DESC92_RATE1M: rate_idx = 0; @@ -1365,7 +1365,7 @@ int rtl_send_smps_action(struct ieee80211_hw *hw, rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0); info->control.rates[0].idx = 0; - info->band = hw->conf.channel->band; + info->band = hw->conf.chandef.chan->band; rtlpriv->intf_ops->adapter_tx(hw, sta, skb, &tcb_desc); } err_free: diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index b5a7a260bf6..64a41ecf86c 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -320,7 +320,7 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - struct ieee80211_channel *channel = hw->conf.channel; + struct ieee80211_channel *channel = hw->conf.chandef.chan; u8 wide_chan = (u8) channel->hw_value; /* @@ -332,7 +332,7 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) *info for cisco1253 bw20, so we modify *it here based on UPPER & LOWER */ - switch (hw->conf.channel_type) { + switch (cfg80211_get_chandef_type(&hw->conf.chandef)) { case NL80211_CHAN_HT20: case NL80211_CHAN_NO_HT: /* SC */ @@ -390,7 +390,7 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) rtlpriv->cfg->ops->switch_channel(hw); rtlpriv->cfg->ops->set_channel_access(hw); rtlpriv->cfg->ops->set_bw_mode(hw, - hw->conf.channel_type); + cfg80211_get_chandef_type(&hw->conf.chandef)); } mutex_unlock(&rtlpriv->locks.conf_mutex); diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index b9b1a6e0b16..27e4ebd5109 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -544,8 +544,8 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw, stats->timestamp_low = GET_RX_DESC_TSFL(pdesc); stats->rx_is40Mhzpacket = (bool) GET_RX_DESC_BW(pdesc); - rx_status->freq = hw->conf.channel->center_freq; - rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; if (GET_RX_DESC_CRC32(pdesc)) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index b6222eedb83..f0dada53015 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -324,8 +324,8 @@ bool rtl92cu_rx_query_desc(struct ieee80211_hw *hw, && (GET_RX_DESC_FAGGR(pdesc) == 1)); stats->timestamp_low = GET_RX_DESC_TSFL(pdesc); stats->rx_is40Mhzpacket = (bool) GET_RX_DESC_BW(pdesc); - rx_status->freq = hw->conf.channel->center_freq; - rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; if (GET_RX_DESC_CRC32(pdesc)) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; if (!GET_RX_DESC_SWDEC(pdesc)) @@ -395,8 +395,8 @@ static void _rtl_rx_process(struct ieee80211_hw *hw, struct sk_buff *skb) stats.rx_is40Mhzpacket = (bool) GET_RX_DESC_BW(rxdesc); /* TODO: is center_freq changed when doing scan? */ /* TODO: Shall we add protection or just skip those two step? */ - rx_status->freq = hw->conf.channel->center_freq; - rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; if (GET_RX_DESC_CRC32(rxdesc)) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; if (!GET_RX_DESC_SWDEC(rxdesc)) diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index 941080e03c0..b8ec718a0fa 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -499,8 +499,8 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, && (GET_RX_DESC_FAGGR(pdesc) == 1)); stats->timestamp_low = GET_RX_DESC_TSFL(pdesc); stats->rx_is40Mhzpacket = (bool) GET_RX_DESC_BW(pdesc); - rx_status->freq = hw->conf.channel->center_freq; - rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; if (GET_RX_DESC_CRC32(pdesc)) rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; if (!GET_RX_DESC_SWDEC(pdesc)) diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index 7b0a2e75b8b..0b074f11f96 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -538,8 +538,8 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, if (stats->hwerror) return false; - rx_status->freq = hw->conf.channel->center_freq; - rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; hdr = (struct ieee80211_hdr *)(skb->data + stats->rx_drvinfo_size + stats->rx_bufshift); diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index ac081297db5..601261d67e8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -304,8 +304,8 @@ bool rtl8723ae_rx_query_desc(struct ieee80211_hw *hw, status->is_cck = RTL8723E_RX_HAL_IS_CCK_RATE(status->rate); - rx_status->freq = hw->conf.channel->center_freq; - rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.chandef.chan->center_freq; + rx_status->band = hw->conf.chandef.chan->band; hdr = (struct ieee80211_hdr *)(skb->data + status->rx_drvinfo_size + status->rx_bufshift); diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index bbbf68cf50a..3291ffa9527 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -572,7 +572,8 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed) struct ieee80211_conf *conf = &hw->conf; int channel, ret = 0; - channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + channel = ieee80211_frequency_to_channel( + conf->chandef.chan->center_freq); wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d", channel, @@ -1223,7 +1224,7 @@ static int wl1251_op_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->filled = SURVEY_INFO_NOISE_DBM; survey->noise = wl->noise; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index a9f7041c719..c26cb095010 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4474,7 +4474,7 @@ static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx, if (idx != 0) return -ENOENT; - survey->channel = conf->channel; + survey->channel = conf->chandef.chan; survey->filled = 0; return 0; } diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 114364b5d46..c6208a7988e 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -1156,10 +1156,10 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed) struct ieee80211_conf *conf = &hw->conf; spin_lock_irq(&mac->lock); - mac->channel = conf->channel->hw_value; + mac->channel = conf->chandef.chan->hw_value; spin_unlock_irq(&mac->lock); - return zd_chip_set_channel(&mac->chip, conf->channel->hw_value); + return zd_chip_set_channel(&mac->chip, conf->chandef.chan->hw_value); } static void zd_beacon_done(struct zd_mac *mac) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 23a275a9a3b..64faf015dd1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -974,8 +974,7 @@ enum ieee80211_smps_mode { * @power_level: requested transmit power (in dBm), backward compatibility * value only that is set to the minimum of all interfaces * - * @channel: the channel to tune to - * @channel_type: the channel (HT) type + * @chandef: the channel definition to tune to * @radar_enabled: whether radar detection is enabled * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame @@ -1001,8 +1000,7 @@ struct ieee80211_conf { u8 long_frame_max_tx_count, short_frame_max_tx_count; - struct ieee80211_channel *channel; - enum nl80211_channel_type channel_type; + struct cfg80211_chan_def chandef; bool radar_enabled; enum ieee80211_smps_mode smps_mode; }; @@ -4216,31 +4214,33 @@ void ieee80211_rate_control_unregister(struct rate_control_ops *ops); static inline bool conf_is_ht20(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT20; + return conf->chandef.width == NL80211_CHAN_WIDTH_20; } static inline bool conf_is_ht40_minus(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT40MINUS; + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && + conf->chandef.center_freq1 < conf->chandef.chan->center_freq; } static inline bool conf_is_ht40_plus(struct ieee80211_conf *conf) { - return conf->channel_type == NL80211_CHAN_HT40PLUS; + return conf->chandef.width == NL80211_CHAN_WIDTH_40 && + conf->chandef.center_freq1 > conf->chandef.chan->center_freq; } static inline bool conf_is_ht40(struct ieee80211_conf *conf) { - return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf); + return conf->chandef.width == NL80211_CHAN_WIDTH_40; } static inline bool conf_is_ht(struct ieee80211_conf *conf) { - return conf->channel_type != NL80211_CHAN_NO_HT; + return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT; } static inline enum nl80211_iftype diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 50aaf25d473..6e43feb49a7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -805,8 +805,7 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy, IEEE80211_CHANCTX_EXCLUSIVE); } } else if (local->open_count == local->monitors) { - local->_oper_channel = chandef->chan; - local->_oper_channel_type = cfg80211_get_chandef_type(chandef); + local->_oper_chandef = *chandef; ieee80211_hw_config(local, 0); } @@ -3373,9 +3372,7 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy, if (local->use_chanctx) *chandef = local->monitor_chandef; else - cfg80211_chandef_create(chandef, - local->_oper_channel, - local->_oper_channel_type); + *chandef = local->_oper_chandef; ret = 0; } rcu_read_unlock(); diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 78c0d90dd64..8024874ba95 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -22,7 +22,7 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local, drv_change_chanctx(local, ctx, IEEE80211_CHANCTX_CHANGE_WIDTH); if (!local->use_chanctx) { - local->_oper_channel_type = cfg80211_get_chandef_type(chandef); + local->_oper_chandef = *chandef; ieee80211_hw_config(local, 0); } } @@ -77,9 +77,7 @@ ieee80211_new_chanctx(struct ieee80211_local *local, ctx->mode = mode; if (!local->use_chanctx) { - local->_oper_channel_type = - cfg80211_get_chandef_type(chandef); - local->_oper_channel = chandef->chan; + local->_oper_chandef = *chandef; ieee80211_hw_config(local, 0); } else { err = drv_add_chanctx(local, ctx); @@ -106,7 +104,10 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, WARN_ON_ONCE(ctx->refcount != 0); if (!local->use_chanctx) { - local->_oper_channel_type = NL80211_CHAN_NO_HT; + struct cfg80211_chan_def *chandef = &local->_oper_chandef; + chandef->width = NL80211_CHAN_WIDTH_20_NOHT; + chandef->center_freq1 = chandef->chan->center_freq; + chandef->center_freq2 = 0; ieee80211_hw_config(local, 0); } else { drv_remove_chanctx(local, ctx); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c7f8b8b29e5..f9782f0f434 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1021,8 +1021,7 @@ struct ieee80211_local { struct ieee80211_sub_if_data __rcu *scan_sdata; struct ieee80211_channel *csa_channel; /* For backward compatibility only -- do not use */ - struct ieee80211_channel *_oper_channel; - enum nl80211_channel_type _oper_channel_type; + struct cfg80211_chan_def _oper_chandef; /* Temporary remain-on-channel for off-channel operations */ struct ieee80211_channel *tmp_channel; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index b0d28682186..a16b037c9d3 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -95,42 +95,47 @@ static void ieee80211_reconfig_filter(struct work_struct *work) static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; - struct ieee80211_channel *chan; + struct cfg80211_chan_def chandef = {}; u32 changed = 0; int power; - enum nl80211_channel_type channel_type; u32 offchannel_flag; offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; + if (local->scan_channel) { - chan = local->scan_channel; + chandef.chan = local->scan_channel; /* If scanning on oper channel, use whatever channel-type * is currently in use. */ - if (chan == local->_oper_channel) - channel_type = local->_oper_channel_type; - else - channel_type = NL80211_CHAN_NO_HT; + if (chandef.chan == local->_oper_chandef.chan) { + chandef = local->_oper_chandef; + } else { + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + chandef.center_freq1 = chandef.chan->center_freq; + } } else if (local->tmp_channel) { - chan = local->tmp_channel; - channel_type = NL80211_CHAN_NO_HT; - } else { - chan = local->_oper_channel; - channel_type = local->_oper_channel_type; - } - - if (chan != local->_oper_channel || - channel_type != local->_oper_channel_type) + chandef.chan = local->tmp_channel; + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + chandef.center_freq1 = chandef.chan->center_freq; + } else + chandef = local->_oper_chandef; + + WARN(!cfg80211_chandef_valid(&chandef), + "control:%d MHz width:%d center: %d/%d MHz", + chandef.chan->center_freq, chandef.width, + chandef.center_freq1, chandef.center_freq2); + + if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef)) local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; else local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; - if (offchannel_flag || chan != local->hw.conf.channel || - channel_type != local->hw.conf.channel_type) { - local->hw.conf.channel = chan; - local->hw.conf.channel_type = channel_type; + if (offchannel_flag || + !cfg80211_chandef_identical(&local->hw.conf.chandef, + &local->_oper_chandef)) { + local->hw.conf.chandef = chandef; changed |= IEEE80211_CONF_CHANGE_CHANNEL; } @@ -146,7 +151,7 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) changed |= IEEE80211_CONF_CHANGE_SMPS; } - power = chan->max_power; + power = chandef.chan->max_power; rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) { @@ -740,11 +745,15 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) sband = local->hw.wiphy->bands[band]; if (!sband) continue; - if (!local->use_chanctx && !local->_oper_channel) { + if (!local->use_chanctx && !local->_oper_chandef.chan) { /* init channel we're on */ - local->hw.conf.channel = - local->_oper_channel = &sband->channels[0]; - local->hw.conf.channel_type = NL80211_CHAN_NO_HT; + struct cfg80211_chan_def chandef = { + .chan = &sband->channels[0], + .width = NL80211_CHAN_NO_HT, + .center_freq1 = sband->channels[0].center_freq, + .center_freq2 = 0 + }; + local->hw.conf.chandef = local->_oper_chandef = chandef; } cfg80211_chandef_create(&local->monitor_chandef, &sband->channels[0], diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9958cb7df8f..237e2ef42ba 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -988,6 +988,7 @@ static void ieee80211_chswitch_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); + struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; if (!ieee80211_sdata_running(sdata)) @@ -997,21 +998,30 @@ static void ieee80211_chswitch_work(struct work_struct *work) if (!ifmgd->associated) goto out; - sdata->local->_oper_channel = sdata->local->csa_channel; - if (!sdata->local->ops->channel_switch) { + /* + * FIXME: Here we are downgrading to NL80211_CHAN_WIDTH_20_NOHT + * and don't adjust our ht/vht settings + * This is wrong - we should behave according to the CSA params + */ + local->_oper_chandef.chan = local->csa_channel; + local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + local->_oper_chandef.center_freq1 = + local->_oper_chandef.chan->center_freq; + local->_oper_chandef.center_freq2 = 0; + + if (!local->ops->channel_switch) { /* call "hw_config" only if doing sw channel switch */ - ieee80211_hw_config(sdata->local, - IEEE80211_CONF_CHANGE_CHANNEL); + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); } else { /* update the device channel directly */ - sdata->local->hw.conf.channel = sdata->local->_oper_channel; + local->hw.conf.chandef = local->_oper_chandef; } /* XXX: shouldn't really modify cfg80211-owned data! */ - ifmgd->associated->channel = sdata->local->_oper_channel; + ifmgd->associated->channel = local->_oper_chandef.chan; /* XXX: wait for a beacon first? */ - ieee80211_wake_queues_by_reason(&sdata->local->hw, + ieee80211_wake_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); out: diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index cb34cbbaa20..581764f92e1 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -384,7 +384,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, { int i; struct ieee80211_sub_if_data *sdata; - enum ieee80211_band band = local->hw.conf.channel->band; + enum ieee80211_band band = local->hw.conf.chandef.chan->band; u32 tx_flags; tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK; @@ -401,7 +401,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - tx_flags, local->hw.conf.channel, true); + tx_flags, local->hw.conf.chandef.chan, true); /* * After sending probe requests, wait for probe responses @@ -467,7 +467,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->ops->hw_scan) { __set_bit(SCAN_HW_SCANNING, &local->scanning); } else if ((req->n_channels == 1) && - (req->channels[0] == local->_oper_channel)) { + (req->channels[0] == local->_oper_chandef.chan)) { /* * If we are scanning only on the operating channel * then we do not need to stop normal activities diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index d79e374e129..8286dcef228 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -28,27 +28,27 @@ #define VIF_PR_FMT " vif:%s(%d%s)" #define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : "" -#define CHANDEF_ENTRY __field(u32, control_freq) \ - __field(u32, chan_width) \ - __field(u32, center_freq1) \ +#define CHANDEF_ENTRY __field(u32, control_freq) \ + __field(u32, chan_width) \ + __field(u32, center_freq1) \ __field(u32, center_freq2) -#define CHANDEF_ASSIGN(c) \ - __entry->control_freq = (c)->chan->center_freq; \ - __entry->chan_width = (c)->width; \ - __entry->center_freq1 = (c)->center_freq1; \ +#define CHANDEF_ASSIGN(c) \ + __entry->control_freq = (c)->chan ? (c)->chan->center_freq : 0; \ + __entry->chan_width = (c)->width; \ + __entry->center_freq1 = (c)->center_freq1; \ __entry->center_freq2 = (c)->center_freq2; #define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz" -#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ +#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ __entry->center_freq1, __entry->center_freq2 -#define CHANCTX_ENTRY CHANDEF_ENTRY \ - __field(u8, rx_chains_static) \ +#define CHANCTX_ENTRY CHANDEF_ENTRY \ + __field(u8, rx_chains_static) \ __field(u8, rx_chains_dynamic) -#define CHANCTX_ASSIGN CHANDEF_ASSIGN(&ctx->conf.def) \ - __entry->rx_chains_static = ctx->conf.rx_chains_static; \ +#define CHANCTX_ASSIGN CHANDEF_ASSIGN(&ctx->conf.def) \ + __entry->rx_chains_static = ctx->conf.rx_chains_static; \ __entry->rx_chains_dynamic = ctx->conf.rx_chains_dynamic #define CHANCTX_PR_FMT CHANDEF_PR_FMT " chains:%d/%d" -#define CHANCTX_PR_ARG CHANDEF_PR_ARG, \ +#define CHANCTX_PR_ARG CHANDEF_PR_ARG, \ __entry->rx_chains_static, __entry->rx_chains_dynamic @@ -286,8 +286,7 @@ TRACE_EVENT(drv_config, __field(u16, listen_interval) __field(u8, long_frame_max_tx_count) __field(u8, short_frame_max_tx_count) - __field(int, center_freq) - __field(int, channel_type) + CHANDEF_ENTRY __field(int, smps) ), @@ -303,15 +302,13 @@ TRACE_EVENT(drv_config, local->hw.conf.long_frame_max_tx_count; __entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count; - __entry->center_freq = local->hw.conf.channel ? - local->hw.conf.channel->center_freq : 0; - __entry->channel_type = local->hw.conf.channel_type; + CHANDEF_ASSIGN(&local->hw.conf.chandef) __entry->smps = local->hw.conf.smps_mode; ), TP_printk( - LOCAL_PR_FMT " ch:%#x freq:%d", - LOCAL_PR_ARG, __entry->changed, __entry->center_freq + LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT, + LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG ) ); diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 4a83d8dea84..aad0bf5d881 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1709,7 +1709,7 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, if (chanctx_conf) chan = chanctx_conf->def.chan; else if (!local->use_chanctx) - chan = local->_oper_channel; + chan = local->_oper_chandef.chan; else goto fail_rcu; @@ -1843,7 +1843,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, * This is the exception! WDS style interfaces are prohibited * when channel contexts are in used so this must be valid */ - band = local->hw.conf.channel->band; + band = local->hw.conf.chandef.chan->band; break; #ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 90cc2b82869..1734cd21c7c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2171,8 +2171,7 @@ void ieee80211_dfs_radar_detected_work(struct work_struct *work) /* currently not handled */ WARN_ON(1); else { - cfg80211_chandef_create(&chandef, local->hw.conf.channel, - local->hw.conf.channel_type); + chandef = local->hw.conf.chandef; cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); } } -- cgit v1.2.3-70-g09d2 From d0e6c21acdd4f38ad8c9644f6321b4746e18e121 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Mon, 25 Mar 2013 16:26:58 +0100 Subject: mac80211: let drivers not supporting channel contexts use VHT It is possible since the global hw config and local switched to cfg80211_chan_def. Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/main.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index a16b037c9d3..52136fd5ba9 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -840,22 +840,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (supp_ht) local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); - if (supp_vht) { + if (supp_vht) local->scan_ies_len += 2 + sizeof(struct ieee80211_vht_cap); - /* - * (for now at least), drivers wanting to use VHT must - * support channel contexts, as they contain all the - * necessary VHT information and the global hw config - * doesn't (yet) - */ - if (WARN_ON(!local->use_chanctx)) { - result = -EINVAL; - goto fail_wiphy_register; - } - } - if (!local->ops->hw_scan) { /* For hw_scan, driver needs to set these up. */ local->hw.wiphy->max_scan_ssids = 4; -- cgit v1.2.3-70-g09d2 From 78e443e4c66b6e9391252f0080a06831259ada3a Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Mon, 25 Mar 2013 11:19:34 -0700 Subject: mac80211: add beacon stats to debugfs Beacon-timeout and number of beacon loss events. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/debugfs_netdev.c | 11 +++++++++++ net/mac80211/debugfs_sta.c | 2 ++ 2 files changed, 13 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index ddb42686790..14abcf44f97 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -124,6 +124,15 @@ static ssize_t ieee80211_if_fmt_##name( \ return scnprintf(buf, buflen, "%d\n", sdata->field / 16); \ } +#define IEEE80211_IF_FMT_JIFFIES_TO_MS(name, field) \ +static ssize_t ieee80211_if_fmt_##name( \ + const struct ieee80211_sub_if_data *sdata, \ + char *buf, int buflen) \ +{ \ + return scnprintf(buf, buflen, "%d\n", \ + jiffies_to_msecs(sdata->field)); \ +} + #define __IEEE80211_IF_FILE(name, _write) \ static ssize_t ieee80211_if_read_##name(struct file *file, \ char __user *userbuf, \ @@ -197,6 +206,7 @@ IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC); IEEE80211_IF_FILE(aid, u.mgd.aid, DEC); IEEE80211_IF_FILE(last_beacon, u.mgd.last_beacon_signal, DEC); IEEE80211_IF_FILE(ave_beacon, u.mgd.ave_beacon_signal, DEC_DIV_16); +IEEE80211_IF_FILE(beacon_timeout, u.mgd.beacon_timeout, JIFFIES_TO_MS); static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata, enum ieee80211_smps_mode smps_mode) @@ -542,6 +552,7 @@ static void add_sta_files(struct ieee80211_sub_if_data *sdata) DEBUGFS_ADD(aid); DEBUGFS_ADD(last_beacon); DEBUGFS_ADD(ave_beacon); + DEBUGFS_ADD(beacon_timeout); DEBUGFS_ADD_MODE(smps, 0600); DEBUGFS_ADD_MODE(tkip_mic_test, 0200); DEBUGFS_ADD_MODE(uapsd_queues, 0600); diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 4f841fe559d..44e201d60a1 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -54,6 +54,7 @@ STA_FILE(aid, sta.aid, D); STA_FILE(dev, sdata->name, S); STA_FILE(last_signal, last_signal, D); STA_FILE(last_ack_signal, last_ack_signal, D); +STA_FILE(beacon_loss_count, beacon_loss_count, D); static ssize_t sta_flags_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) @@ -434,6 +435,7 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta) DEBUGFS_ADD(agg_status); DEBUGFS_ADD(dev); DEBUGFS_ADD(last_signal); + DEBUGFS_ADD(beacon_loss_count); DEBUGFS_ADD(ht_capa); DEBUGFS_ADD(vht_capa); DEBUGFS_ADD(last_ack_signal); -- cgit v1.2.3-70-g09d2 From a13fbe549fded5b77e020d4e08f1f74e212cc543 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Mon, 25 Mar 2013 11:19:35 -0700 Subject: mac80211: be more careful about sending beacon-loss-events I don't think we should send the events unless it was actually a beacon that was lost...not just any probe of an AP. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 237e2ef42ba..e12fedcfa98 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1988,13 +1988,15 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, goto out; } - if (beacon) + if (beacon) { mlme_dbg_ratelimited(sdata, "detected beacon loss from AP (missed %d beacons) - probing\n", beacon_loss_count); - ieee80211_cqm_rssi_notify(&sdata->vif, - NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL); + ieee80211_cqm_rssi_notify(&sdata->vif, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, + GFP_KERNEL); + } /* * The driver/our work has already reported this event or the -- cgit v1.2.3-70-g09d2 From c5d54fbf0ebdfa9e2a6264781548ab81e0eed688 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 21:54:24 +0100 Subject: mac80211: remove ancient reference to master interface The master interface no longer exists ... and hasn't for a few years now, so remove this reference :-) Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index d646e12e55a..2bdbf14e7b7 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1,5 +1,5 @@ /* - * Interface handling (except master interface) + * Interface handling * * Copyright 2002-2005, Instant802 Networks, Inc. * Copyright 2005-2006, Devicescape Software, Inc. -- cgit v1.2.3-70-g09d2 From a6dfba841c4d38312115dc6b08d86cc496af7e88 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 14:27:01 +0100 Subject: mac80211: remove unused IE pointers from parser There's no need to parse IEs that aren't used so just remove them. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 9 --------- net/mac80211/util.c | 19 ------------------- 2 files changed, 28 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index f9782f0f434..bb4bfe43bf4 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1157,11 +1157,8 @@ struct ieee802_11_elems { /* pointers to IEs */ const u8 *ssid; const u8 *supp_rates; - const u8 *fh_params; const u8 *ds_params; - const u8 *cf_params; const struct ieee80211_tim_ie *tim; - const u8 *ibss_params; const u8 *challenge; const u8 *rsn; const u8 *erp_info; @@ -1183,18 +1180,14 @@ struct ieee802_11_elems { const struct ieee80211_channel_sw_ie *ch_switch_ie; const u8 *country_elem; const u8 *pwr_constr_elem; - const u8 *quiet_elem; /* first quite element */ const u8 *timeout_int; const u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; u8 supp_rates_len; - u8 fh_params_len; u8 ds_params_len; - u8 cf_params_len; u8 tim_len; - u8 ibss_params_len; u8 challenge_len; u8 rsn_len; u8 erp_info_len; @@ -1207,8 +1200,6 @@ struct ieee802_11_elems { u8 prep_len; u8 perr_len; u8 country_elem_len; - u8 quiet_elem_len; - u8 num_of_quiet_elem; /* can be more the one */ u8 timeout_int_len; /* whether a parse error occurred while retrieving these elements */ diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1734cd21c7c..2708b270e94 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -738,18 +738,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->supp_rates = pos; elems->supp_rates_len = elen; break; - case WLAN_EID_FH_PARAMS: - elems->fh_params = pos; - elems->fh_params_len = elen; - break; case WLAN_EID_DS_PARAMS: elems->ds_params = pos; elems->ds_params_len = elen; break; - case WLAN_EID_CF_PARAMS: - elems->cf_params = pos; - elems->cf_params_len = elen; - break; case WLAN_EID_TIM: if (elen >= sizeof(struct ieee80211_tim_ie)) { elems->tim = (void *)pos; @@ -757,10 +749,6 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, } else elem_parse_failed = true; break; - case WLAN_EID_IBSS_PARAMS: - elems->ibss_params = pos; - elems->ibss_params_len = elen; - break; case WLAN_EID_CHALLENGE: elems->challenge = pos; elems->challenge_len = elen; @@ -870,13 +858,6 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, } elems->ch_switch_ie = (void *)pos; break; - case WLAN_EID_QUIET: - if (!elems->quiet_elem) { - elems->quiet_elem = pos; - elems->quiet_elem_len = elen; - } - elems->num_of_quiet_elem++; - break; case WLAN_EID_COUNTRY: elems->country_elem = pos; elems->country_elem_len = elen; -- cgit v1.2.3-70-g09d2 From 1cd8e88e17729f57a9c7f751103e522596bb5de2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 14:30:12 +0100 Subject: mac80211: check DSSS params IE length in parser It's always just one byte, so check for that and remove the length field from the parser struct. Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 2 +- net/mac80211/ieee80211_i.h | 1 - net/mac80211/mesh.c | 2 +- net/mac80211/mlme.c | 2 +- net/mac80211/util.c | 6 ++++-- 5 files changed, 7 insertions(+), 6 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5ab32e2a7b5..2a0b2186d98 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -463,7 +463,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; bool rates_updated = false; - if (elems->ds_params && elems->ds_params_len == 1) + if (elems->ds_params) freq = ieee80211_channel_to_frequency(elems->ds_params[0], band); else diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index bb4bfe43bf4..eccd1d805ec 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1186,7 +1186,6 @@ struct ieee802_11_elems { /* length of them, respectively */ u8 ssid_len; u8 supp_rates_len; - u8 ds_params_len; u8 tim_len; u8 challenge_len; u8 rsn_len; diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index aead5410c62..0acc2874d29 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -907,7 +907,7 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, (!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE)) return; - if (elems.ds_params && elems.ds_params_len == 1) + if (elems.ds_params) freq = ieee80211_channel_to_frequency(elems.ds_params[0], band); else freq = rx_status->freq; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e12fedcfa98..f76c58fb3bd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2695,7 +2695,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, } } - if (elems->ds_params && elems->ds_params_len == 1) + if (elems->ds_params) freq = ieee80211_channel_to_frequency(elems->ds_params[0], rx_status->band); else diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 2708b270e94..0f7d1c20f8a 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -739,8 +739,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->supp_rates_len = elen; break; case WLAN_EID_DS_PARAMS: - elems->ds_params = pos; - elems->ds_params_len = elen; + if (elen >= 1) + elems->ds_params = pos; + else + elem_parse_failed = true; break; case WLAN_EID_TIM: if (elen >= sizeof(struct ieee80211_tim_ie)) { -- cgit v1.2.3-70-g09d2 From 1946bed95707ef75d85e94ebe106ce7a119ca831 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 14:31:53 +0100 Subject: mac80211: check ERP info IE length in parser It's always just one byte, so check for that and remove the length field from the parser struct. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 1 - net/mac80211/mlme.c | 2 +- net/mac80211/scan.c | 5 ++--- net/mac80211/util.c | 6 ++++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index eccd1d805ec..6ad019d3262 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1189,7 +1189,6 @@ struct ieee802_11_elems { u8 tim_len; u8 challenge_len; u8 rsn_len; - u8 erp_info_len; u8 ext_supp_rates_len; u8 wmm_info_len; u8 wmm_param_len; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f76c58fb3bd..157d951df7a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3038,7 +3038,7 @@ ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, changed |= BSS_CHANGED_DTIM_PERIOD; } - if (elems.erp_info && elems.erp_info_len >= 1) { + if (elems.erp_info) { erp_valid = true; erp_value = elems.erp_info[0]; } else { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 581764f92e1..33fbf104569 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -98,9 +98,8 @@ ieee80211_bss_info_update(struct ieee80211_local *local, } /* save the ERP value so that it is available at association time */ - if (elems->erp_info && elems->erp_info_len >= 1 && - (!elems->parse_error || - !(bss->valid_data & IEEE80211_BSS_VALID_ERP))) { + if (elems->erp_info && (!elems->parse_error || + !(bss->valid_data & IEEE80211_BSS_VALID_ERP))) { bss->erp_value = elems->erp_info[0]; bss->has_erp_value = true; if (!elems->parse_error) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 0f7d1c20f8a..4839dec5c9a 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -780,8 +780,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->rsn_len = elen; break; case WLAN_EID_ERP_INFO: - elems->erp_info = pos; - elems->erp_info_len = elen; + if (elen >= 1) + elems->erp_info = pos; + else + elem_parse_failed = true; break; case WLAN_EID_EXT_SUPP_RATES: elems->ext_supp_rates = pos; -- cgit v1.2.3-70-g09d2 From 79ba1d8910f517c3bd39d794ddb1a5b4c03795c4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 14:38:07 +0100 Subject: mac80211: parse Timeout Interval Element using a struct Instead of open-coding the accesses and length check do the length check in the IE parser and assign a struct pointer for use in the remaining code. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 10 ++++++++++ net/mac80211/ieee80211_i.h | 3 +-- net/mac80211/mlme.c | 6 +++--- net/mac80211/util.c | 6 ++++-- 4 files changed, 18 insertions(+), 7 deletions(-) (limited to 'net/mac80211') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d10b5bba326..e46fea8b972 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1955,6 +1955,16 @@ enum ieee80211_timeout_interval_type { WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */, }; +/** + * struct ieee80211_timeout_interval_ie - Timeout Interval element + * @type: type, see &enum ieee80211_timeout_interval_type + * @value: timeout interval value + */ +struct ieee80211_timeout_interval_ie { + u8 type; + __le32 value; +} __packed; + /* BACK action code */ enum ieee80211_back_actioncode { WLAN_ACTION_ADDBA_REQ = 0, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6ad019d3262..c783e996bcc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1180,7 +1180,7 @@ struct ieee802_11_elems { const struct ieee80211_channel_sw_ie *ch_switch_ie; const u8 *country_elem; const u8 *pwr_constr_elem; - const u8 *timeout_int; + const struct ieee80211_timeout_interval_ie *timeout_int; const u8 *opmode_notif; /* length of them, respectively */ @@ -1198,7 +1198,6 @@ struct ieee802_11_elems { u8 prep_len; u8 perr_len; u8 country_elem_len; - u8 timeout_int_len; /* whether a parse error occurred while retrieving these elements */ bool parse_error; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 157d951df7a..304d6cfc625 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2629,10 +2629,10 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && - elems.timeout_int && elems.timeout_int_len == 5 && - elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) { + elems.timeout_int && + elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { u32 tu, ms; - tu = get_unaligned_le32(elems.timeout_int + 1); + tu = le32_to_cpu(elems.timeout_int->value); ms = tu * 1024 / 1000; sdata_info(sdata, "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 4839dec5c9a..f9581c6378a 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -874,8 +874,10 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elems->pwr_constr_elem = pos; break; case WLAN_EID_TIMEOUT_INTERVAL: - elems->timeout_int = pos; - elems->timeout_int_len = elen; + if (elen >= sizeof(struct ieee80211_timeout_interval_ie)) + elems->timeout_int = (void *)pos; + else + elem_parse_failed = true; break; default: break; -- cgit v1.2.3-70-g09d2 From 0f71651f935d05557eac5862ff68dd2335b0ce0e Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Wed, 3 Apr 2013 17:49:53 +0800 Subject: mac80211: fix the PREP mesh hwmp debug message The mesh hwmp debug message is a bit confusing. The "sending PREP to %p" should be the MAC address of mesh STA that has originated the PREQ message and the "received PREP from %pM" should be the MAC address of the mesh STA that has originated the PREP message. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index bdb8d3b1458..94904337784 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -144,7 +144,7 @@ static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, *pos++ = WLAN_EID_PREQ; break; case MPATH_PREP: - mhwmp_dbg(sdata, "sending PREP to %pM\n", target); + mhwmp_dbg(sdata, "sending PREP to %pM\n", orig_addr); ie_len = 31; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PREP; @@ -661,7 +661,7 @@ static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, u32 target_sn, orig_sn, lifetime; mhwmp_dbg(sdata, "received PREP from %pM\n", - PREP_IE_ORIG_ADDR(prep_elem)); + PREP_IE_TARGET_ADDR(prep_elem)); orig_addr = PREP_IE_ORIG_ADDR(prep_elem); if (ether_addr_equal(orig_addr, sdata->vif.addr)) -- cgit v1.2.3-70-g09d2 From ae76eef027f75fadd8a8eda55ee07707f077aacb Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 29 Mar 2013 09:38:39 -0400 Subject: mac80211: return new mpath from mesh_path_add() Most times that mesh_path_add() is called, it is followed by a lookup to get the just-added mpath. We can instead just return the new mpath in the case that we allocated one (or the existing one if already there), so do that. Also, reorder the code in mesh_path_add a bit so that we don't need to allocate in the pre-existing case. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 12 +++------- net/mac80211/mesh.h | 3 ++- net/mac80211/mesh_hwmp.c | 22 ++++++++---------- net/mac80211/mesh_pathtbl.c | 56 ++++++++++++++++++++++----------------------- 4 files changed, 42 insertions(+), 51 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 6e43feb49a7..edca2a288ab 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1540,7 +1540,6 @@ static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; - int err; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -1551,17 +1550,12 @@ static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, return -ENOENT; } - err = mesh_path_add(sdata, dst); - if (err) { + mpath = mesh_path_add(sdata, dst); + if (IS_ERR(mpath)) { rcu_read_unlock(); - return err; + return PTR_ERR(mpath); } - mpath = mesh_path_lookup(sdata, dst); - if (!mpath) { - rcu_read_unlock(); - return -ENXIO; - } mesh_path_fix_nexthop(mpath, sta); rcu_read_unlock(); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 6ffabbe99c4..da158774eeb 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -275,7 +275,8 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop); void mesh_path_expire(struct ieee80211_sub_if_data *sdata); void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len); -int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst); +struct mesh_path * +mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst); int mesh_path_add_gate(struct mesh_path *mpath); int mesh_path_send_to_gates(struct mesh_path *mpath); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 94904337784..c82d5e6a24c 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -445,9 +445,8 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, } } } else { - mesh_path_add(sdata, orig_addr); - mpath = mesh_path_lookup(sdata, orig_addr); - if (!mpath) { + mpath = mesh_path_add(sdata, orig_addr); + if (IS_ERR(mpath)) { rcu_read_unlock(); return 0; } @@ -486,9 +485,8 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, (last_hop_metric > mpath->metric))) fresh_info = false; } else { - mesh_path_add(sdata, ta); - mpath = mesh_path_lookup(sdata, ta); - if (!mpath) { + mpath = mesh_path_add(sdata, ta); + if (IS_ERR(mpath)) { rcu_read_unlock(); return 0; } @@ -804,9 +802,8 @@ static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, mpath = mesh_path_lookup(sdata, orig_addr); if (!mpath) { - mesh_path_add(sdata, orig_addr); - mpath = mesh_path_lookup(sdata, orig_addr); - if (!mpath) { + mpath = mesh_path_add(sdata, orig_addr); + if (IS_ERR(mpath)) { rcu_read_unlock(); sdata->u.mesh.mshstats.dropped_frames_no_route++; return; @@ -1098,11 +1095,10 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata, /* no nexthop found, start resolving */ mpath = mesh_path_lookup(sdata, target_addr); if (!mpath) { - mesh_path_add(sdata, target_addr); - mpath = mesh_path_lookup(sdata, target_addr); - if (!mpath) { + mpath = mesh_path_add(sdata, target_addr); + if (IS_ERR(mpath)) { mesh_path_discard_frame(sdata, skb); - err = -ENOSPC; + err = PTR_ERR(mpath); goto endlookup; } } diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index dc7c8df40c2..89aacfd2756 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -493,7 +493,8 @@ int mesh_gate_num(struct ieee80211_sub_if_data *sdata) * * State: the initial state of the new path is set to 0 */ -int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst) +struct mesh_path *mesh_path_add(struct ieee80211_sub_if_data *sdata, + const u8 *dst) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; @@ -502,18 +503,33 @@ int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst) struct mpath_node *node, *new_node; struct hlist_head *bucket; int grow = 0; - int err = 0; + int err; u32 hash_idx; if (ether_addr_equal(dst, sdata->vif.addr)) /* never add ourselves as neighbours */ - return -ENOTSUPP; + return ERR_PTR(-ENOTSUPP); if (is_multicast_ether_addr(dst)) - return -ENOTSUPP; + return ERR_PTR(-ENOTSUPP); if (atomic_add_unless(&sdata->u.mesh.mpaths, 1, MESH_MAX_MPATHS) == 0) - return -ENOSPC; + return ERR_PTR(-ENOSPC); + + read_lock_bh(&pathtbl_resize_lock); + tbl = resize_dereference_mesh_paths(); + + hash_idx = mesh_table_hash(dst, sdata, tbl); + bucket = &tbl->hash_buckets[hash_idx]; + + spin_lock(&tbl->hashwlock[hash_idx]); + + hlist_for_each_entry(node, bucket, list) { + mpath = node->mpath; + if (mpath->sdata == sdata && + ether_addr_equal(dst, mpath->dst)) + goto found; + } err = -ENOMEM; new_mpath = kzalloc(sizeof(struct mesh_path), GFP_ATOMIC); @@ -524,7 +540,6 @@ int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst) if (!new_node) goto err_node_alloc; - read_lock_bh(&pathtbl_resize_lock); memcpy(new_mpath->dst, dst, ETH_ALEN); eth_broadcast_addr(new_mpath->rann_snd_addr); new_mpath->is_root = false; @@ -538,21 +553,6 @@ int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst) spin_lock_init(&new_mpath->state_lock); init_timer(&new_mpath->timer); - tbl = resize_dereference_mesh_paths(); - - hash_idx = mesh_table_hash(dst, sdata, tbl); - bucket = &tbl->hash_buckets[hash_idx]; - - spin_lock(&tbl->hashwlock[hash_idx]); - - err = -EEXIST; - hlist_for_each_entry(node, bucket, list) { - mpath = node->mpath; - if (mpath->sdata == sdata && - ether_addr_equal(dst, mpath->dst)) - goto err_exists; - } - hlist_add_head_rcu(&new_node->list, bucket); if (atomic_inc_return(&tbl->entries) >= tbl->mean_chain_len * (tbl->hash_mask + 1)) @@ -560,23 +560,23 @@ int mesh_path_add(struct ieee80211_sub_if_data *sdata, const u8 *dst) mesh_paths_generation++; - spin_unlock(&tbl->hashwlock[hash_idx]); - read_unlock_bh(&pathtbl_resize_lock); if (grow) { set_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags); ieee80211_queue_work(&local->hw, &sdata->work); } - return 0; - -err_exists: + mpath = new_mpath; +found: spin_unlock(&tbl->hashwlock[hash_idx]); read_unlock_bh(&pathtbl_resize_lock); - kfree(new_node); + return mpath; + err_node_alloc: kfree(new_mpath); err_path_alloc: atomic_dec(&sdata->u.mesh.mpaths); - return err; + spin_unlock(&tbl->hashwlock[hash_idx]); + read_unlock_bh(&pathtbl_resize_lock); + return ERR_PTR(err); } static void mesh_table_free_rcu(struct rcu_head *rcu) -- cgit v1.2.3-70-g09d2 From afdc7c18e9f2a768865b6caa886e605719a6304e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 22:40:22 +0100 Subject: mac80211: remove outdated comment referring to master interface The code now explicitly calls ieee80211_configure_filter() anyway, so nothing needs to be explained. Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 2bdbf14e7b7..760268e5195 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -718,12 +718,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); - /* - * Don't count this interface for promisc/allmulti while it - * is down. dev_mc_unsync() will invoke set_multicast_list - * on the master interface which will sync these down to the - * hardware as filter flags. - */ + /* don't count this interface for promisc/allmulti while it is down */ if (sdata->flags & IEEE80211_SDATA_ALLMULTI) atomic_dec(&local->iff_allmultis); -- cgit v1.2.3-70-g09d2 From c8f994eec2a966a7a5fb6a3be517e3ede6a3cafa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 22:49:19 +0100 Subject: mac80211: purge remain-on-channel items when suspending They can't really be executed while suspended and could trigger work warnings, so abort all ROC items. When the system resumes the notifications about this will be delivered to userspace which can then act accordingly (though it will assume they were canceled/finished.) Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 3 ++- net/mac80211/iface.c | 2 +- net/mac80211/offchannel.c | 6 +++--- net/mac80211/pm.c | 2 ++ 4 files changed, 8 insertions(+), 5 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c783e996bcc..693c1812b7b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1315,7 +1315,8 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local); void ieee80211_offchannel_return(struct ieee80211_local *local); void ieee80211_roc_setup(struct ieee80211_local *local); void ieee80211_start_next_roc(struct ieee80211_local *local); -void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata); +void ieee80211_roc_purge(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata); void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc); void ieee80211_sw_roc_work(struct work_struct *work); void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 760268e5195..75b322f9d94 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -693,7 +693,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, if (sdata->dev) netif_tx_stop_all_queues(sdata->dev); - ieee80211_roc_purge(sdata); + ieee80211_roc_purge(local, sdata); if (sdata->vif.type == NL80211_IFTYPE_STATION) ieee80211_mgd_stop(sdata); diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index b01eb7314ec..e19d6cf26dd 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -436,15 +436,15 @@ void ieee80211_roc_setup(struct ieee80211_local *local) INIT_LIST_HEAD(&local->roc_list); } -void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata) +void ieee80211_roc_purge(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) { - struct ieee80211_local *local = sdata->local; struct ieee80211_roc_work *roc, *tmp; LIST_HEAD(tmp_list); mutex_lock(&local->mtx); list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { - if (roc->sdata != sdata) + if (sdata && roc->sdata != sdata) continue; if (roc->started && local->ops->remain_on_channel) { diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 3d16f4e6174..b98d927dd0f 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -19,6 +19,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) ieee80211_dfs_cac_cancel(local); + ieee80211_roc_purge(local, NULL); + if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { -- cgit v1.2.3-70-g09d2 From 3c3e21e7443bdb948437a6e925fd111e932dc083 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 23:20:27 +0100 Subject: mac80211: destroy virtual monitor interface across suspend It has to be removed from the driver, but completely destroying it helps handle unplug of a device during suspend since then the channel context handling etc. doesn't have to happen later when it's removed. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/iface.c | 4 ++-- net/mac80211/pm.c | 6 ++---- net/mac80211/util.c | 5 +++++ 4 files changed, 11 insertions(+), 6 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 693c1812b7b..55fb382a819 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1336,6 +1336,8 @@ void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, const int offset); int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up); void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata); +int ieee80211_add_virtual_monitor(struct ieee80211_local *local); +void ieee80211_del_virtual_monitor(struct ieee80211_local *local); bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata); void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 75b322f9d94..d0d5f20f1ec 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -346,7 +346,7 @@ static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata) sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; } -static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) +int ieee80211_add_virtual_monitor(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; int ret = 0; @@ -400,7 +400,7 @@ static int ieee80211_add_virtual_monitor(struct ieee80211_local *local) return ret; } -static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) +void ieee80211_del_virtual_monitor(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index b98d927dd0f..d1c021b62fe 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -21,6 +21,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) ieee80211_roc_purge(local, NULL); + ieee80211_del_virtual_monitor(local); + if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { @@ -103,10 +105,6 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) drv_remove_interface(local, sdata); } - sdata = rtnl_dereference(local->monitor_sdata); - if (sdata) - drv_remove_interface(local, sdata); - /* * We disconnected on all interfaces before suspend, all channel * contexts should be released. diff --git a/net/mac80211/util.c b/net/mac80211/util.c index f9581c6378a..43465b6e477 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1461,6 +1461,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* add interfaces */ sdata = rtnl_dereference(local->monitor_sdata); if (sdata) { + /* in HW restart it exists already */ + WARN_ON(local->resuming); res = drv_add_interface(local, sdata); if (WARN_ON(res)) { rcu_assign_pointer(local->monitor_sdata, NULL); @@ -1650,6 +1652,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) local->in_reconfig = false; barrier(); + if (local->monitors == local->open_count && local->monitors > 0) + ieee80211_add_virtual_monitor(local); + /* * Clear the WLAN_STA_BLOCK_BA flag so new aggregation * sessions can be established after a resume. -- cgit v1.2.3-70-g09d2 From b2c0958b203784659e230bde6bd553d7c37bb4d2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 23:24:53 +0100 Subject: mac80211: fix do_stop handling while suspended When a device is unplugged while suspended, mac80211 is de-initialized and all interfaces are removed while no state is actually present in the driver. This can cause warnings and driver confusion. Fix this by reordering the do_stop code to not call the driver when it is suspended, i.e. when there's no state in the driver anyway. The previous patches removed a few corner cases in ROC and virtual monitor interfaces so that now this is safe to do and no state should be left over. Reported-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 74 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 49 insertions(+), 25 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index d0d5f20f1ec..8c9419595bc 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -739,8 +739,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, sdata->dev->addr_len); spin_unlock_bh(&local->filter_lock); netif_addr_unlock_bh(sdata->dev); - - ieee80211_configure_filter(local); } del_timer_sync(&local->dynamic_ps_timer); @@ -751,6 +749,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); if (sdata->wdev.cac_started) { + WARN_ON(local->suspended); mutex_lock(&local->iflist_mtx); ieee80211_vif_release_channel(sdata); mutex_unlock(&local->iflist_mtx); @@ -801,14 +800,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, if (local->monitors == 0) { local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR; hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; - ieee80211_del_virtual_monitor(local); } ieee80211_adjust_monitor_flags(sdata, -1); - ieee80211_configure_filter(local); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); break; case NL80211_IFTYPE_P2P_DEVICE: /* relies on synchronize_rcu() below */ @@ -838,27 +832,10 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, /* fall through */ case NL80211_IFTYPE_AP: skb_queue_purge(&sdata->skb_queue); - - if (going_down) - drv_remove_interface(local, sdata); } sdata->bss = NULL; - ieee80211_recalc_ps(local, -1); - - if (local->open_count == 0) { - ieee80211_clear_tx_pending(local); - ieee80211_stop_device(local); - - /* no reconfiguring after stop! */ - hw_reconf_flags = 0; - } - - /* do after stop to avoid reconfiguring when we stop anyway */ - if (hw_reconf_flags) - ieee80211_hw_config(local, hw_reconf_flags); - spin_lock_irqsave(&local->queue_stop_reason_lock, flags); for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { skb_queue_walk_safe(&local->pending[i], skb, tmp) { @@ -871,7 +848,54 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, } spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - if (local->monitors == local->open_count && local->monitors > 0) + if (local->open_count == 0) + ieee80211_clear_tx_pending(local); + + /* + * If the interface goes down while suspended, presumably because + * the device was unplugged and that happens before our resume, + * then the driver is already unconfigured and the remainder of + * this function isn't needed. + * XXX: what about WoWLAN? If the device has software state, e.g. + * memory allocated, it might expect teardown commands from + * mac80211 here? + */ + if (local->suspended) { + WARN_ON(local->wowlan); + WARN_ON(rtnl_dereference(local->monitor_sdata)); + return; + } + + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + break; + case NL80211_IFTYPE_MONITOR: + if (local->monitors == 0) + ieee80211_del_virtual_monitor(local); + + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); + break; + default: + if (going_down) + drv_remove_interface(local, sdata); + } + + ieee80211_recalc_ps(local, -1); + + if (local->open_count == 0) { + ieee80211_stop_device(local); + + /* no reconfiguring after stop! */ + return; + } + + /* do after stop to avoid reconfiguring when we stop anyway */ + ieee80211_configure_filter(local); + ieee80211_hw_config(local, hw_reconf_flags); + + if (local->monitors == local->open_count) ieee80211_add_virtual_monitor(local); } -- cgit v1.2.3-70-g09d2 From 24aa11ab8ae03292d38ec0dbd9bc2ac49fe8a6dd Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Tue, 2 Apr 2013 15:30:14 +0300 Subject: mac80211: disable uAPSD if all ACs are under ACM It's unlikely that an AP requires WMM mandatory admission control for all access categories, and if it does then we still transmit on the background AC without requesting admission. However, avoid using uAPSD in this case since the implementation could run into issues and might use other ACs etc. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 304d6cfc625..43bfa819981 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4086,7 +4086,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); if (bss->wmm_used && bss->uapsd_supported && - (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) { + (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) && + sdata->wmm_acm != 0xff) { assoc_data->uapsd = true; ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; } else { -- cgit v1.2.3-70-g09d2 From a1598383241a602123b0bcf1c5210dc9617f536f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 22:02:42 +0100 Subject: mac80211: don't fiddle with netdev queues in MLME code The netdev queues should always represent the state that the driver gave them, so fiddling with them isn't really appropriate in the mlme code. Also, since we stop queues for flushing now, this really isn't necessary any more. As the scan/offchannel code has also been modified to no longer do this a while ago, remove the outdated smp_mb() and comments about it. While at it, also add a pair of braces that was missing. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 26 ++------------------------ 1 file changed, 2 insertions(+), 24 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 43bfa819981..79647eaecc8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1443,13 +1443,11 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) && !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { - netif_tx_stop_all_queues(sdata->dev); - - if (drv_tx_frames_pending(local)) + if (drv_tx_frames_pending(local)) { mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies( local->hw.conf.dynamic_ps_timeout)); - else { + } else { ieee80211_send_nullfunc(local, sdata, 1); /* Flush to get the tx status of nullfunc frame */ ieee80211_flush_queues(local, sdata); @@ -1463,9 +1461,6 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) local->hw.conf.flags |= IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } - - if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) - netif_tx_wake_all_queues(sdata->dev); } void ieee80211_dynamic_ps_timer(unsigned long data) @@ -1725,7 +1720,6 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_smps(sdata); ieee80211_recalc_ps_vif(sdata); - netif_tx_start_all_queues(sdata->dev); netif_carrier_on(sdata->dev); } @@ -1748,22 +1742,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_stop_poll(sdata); ifmgd->associated = NULL; - - /* - * we need to commit the associated = NULL change because the - * scan code uses that to determine whether this iface should - * go to/wake up from powersave or not -- and could otherwise - * wake the queues erroneously. - */ - smp_mb(); - - /* - * Thus, we can only afterwards stop the queues -- to account - * for the case where another CPU is finishing a scan at this - * time -- we don't want the scan code to enable queues. - */ - - netif_tx_stop_all_queues(sdata->dev); netif_carrier_off(sdata->dev); /* -- cgit v1.2.3-70-g09d2 From a23108248a9d41400e686becddb5584b3a3fec1e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 22:10:02 +0100 Subject: mac80211: replace some dead code by a warning Given the (nested) switch statements, this code can't be reached, so make it warn instead of manipulating the carrier state which seems purposeful. Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8c9419595bc..63b63675aa6 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -581,7 +581,8 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) case NL80211_IFTYPE_P2P_DEVICE: break; default: - netif_carrier_on(dev); + /* not reached */ + WARN_ON(1); } /* -- cgit v1.2.3-70-g09d2 From 2b730daacee6c318bce7b6373c19909e36a74590 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 22:23:20 +0100 Subject: mac80211: don't start new netdev queues if driver stopped If a new netdev (e.g. an AP VLAN) is created while the driver has queues stopped, the new netdev queues will be started even though they shouldn't. This will lead to frames accumulating on the internal mac80211 pending queues instead of properly being held on the netdev queues. Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 63b63675aa6..b6abaaa3676 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -639,8 +639,28 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) ieee80211_recalc_ps(local, -1); - if (dev) - netif_tx_start_all_queues(dev); + if (dev) { + unsigned long flags; + int n_acs = IEEE80211_NUM_ACS; + int ac; + + if (local->hw.queues < IEEE80211_NUM_ACS) + n_acs = 1; + + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + if (sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE || + (local->queue_stop_reasons[sdata->vif.cab_queue] == 0 && + skb_queue_empty(&local->pending[sdata->vif.cab_queue]))) { + for (ac = 0; ac < n_acs; ac++) { + int ac_queue = sdata->vif.hw_queue[ac]; + + if (local->queue_stop_reasons[ac_queue] == 0 && + skb_queue_empty(&local->pending[ac_queue])) + netif_start_subqueue(dev, ac); + } + } + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); + } return 0; err_del_interface: -- cgit v1.2.3-70-g09d2 From ddc4db2e3d5393ede7a9222bb3b7522a603a4678 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 14:55:31 +0100 Subject: mac80211: make ieee802_11_parse_elems an inline This (slightly) reduces the code size. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 8 ++++++-- net/mac80211/util.c | 6 ------ 2 files changed, 6 insertions(+), 8 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 55fb382a819..8d5dcbf17bb 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1492,11 +1492,15 @@ static inline void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, ieee80211_tx_skb_tid(sdata, skb, 7); } -void ieee802_11_parse_elems(u8 *start, size_t len, - struct ieee802_11_elems *elems); u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, struct ieee802_11_elems *elems, u64 filter, u32 crc); +static inline void ieee802_11_parse_elems(u8 *start, size_t len, + struct ieee802_11_elems *elems) +{ + ieee802_11_parse_elems_crc(start, len, elems, 0, 0); +} + u32 ieee80211_mandatory_rates(struct ieee80211_local *local, enum ieee80211_band band); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 43465b6e477..447e6651e7f 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -898,12 +898,6 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, return crc; } -void ieee802_11_parse_elems(u8 *start, size_t len, - struct ieee802_11_elems *elems) -{ - ieee802_11_parse_elems_crc(start, len, elems, 0, 0); -} - void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, bool bss_notify) { -- cgit v1.2.3-70-g09d2 From 9d6d6f4924133567a108a862d9cf949cd03f71cb Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 8 Apr 2013 11:06:12 -0700 Subject: mac80211: unset FC retry bit in mesh fwding path Otherwise forwarded frames would keep the retry bit set from the previous link transmission. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/mac80211') diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5b4492af4e8..5168f89c754 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2085,6 +2085,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx) } fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data; + fwd_hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_RETRY); info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; -- cgit v1.2.3-70-g09d2 From 3088f7d2db42925808c4b43a6258647ee4d1dd5f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 8 Apr 2013 11:06:16 -0700 Subject: mac80211: stringify another plink state The patch "mac80211: stringify mesh peering events" missed an opportunity to print the peering state as a string. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/mesh_plink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 937e06fe8f2..cdd41835334 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -544,8 +544,8 @@ static void mesh_plink_timer(unsigned long data) return; } mpl_dbg(sta->sdata, - "Mesh plink timer for %pM fired on state %d\n", - sta->sta.addr, sta->plink_state); + "Mesh plink timer for %pM fired on state %s\n", + sta->sta.addr, mplstates[sta->plink_state]); reason = 0; llid = sta->llid; plid = sta->plid; -- cgit v1.2.3-70-g09d2 From e47468518b9dc42db459e7240909946316d9c6c9 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Mon, 8 Apr 2013 22:43:16 +0200 Subject: mac80211: fix recalc_radar hwconf sync problem local->hw.conf maybe not be synced when recalcing whether radar is enabled, sometimes leaving radar enabled even if it's not neccesary anymore. Fix this by: * setting radar_enabled when creating the chanctx * turning radar_enabled off before destroying the last channel context Reported-by: Zefir Kurtisi Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 43 +++++++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 10 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 8024874ba95..166165efd8e 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -57,6 +57,22 @@ ieee80211_find_chanctx(struct ieee80211_local *local, return NULL; } +static bool ieee80211_is_radar_required(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (sdata->radar_required) { + rcu_read_unlock(); + return true; + } + } + rcu_read_unlock(); + + return false; +} + static struct ieee80211_chanctx * ieee80211_new_chanctx(struct ieee80211_local *local, const struct cfg80211_chan_def *chandef, @@ -75,6 +91,9 @@ ieee80211_new_chanctx(struct ieee80211_local *local, ctx->conf.rx_chains_static = 1; ctx->conf.rx_chains_dynamic = 1; ctx->mode = mode; + ctx->conf.radar_enabled = ieee80211_is_radar_required(local); + if (!local->use_chanctx) + local->hw.conf.radar_enabled = ctx->conf.radar_enabled; if (!local->use_chanctx) { local->_oper_chandef = *chandef; @@ -99,6 +118,7 @@ ieee80211_new_chanctx(struct ieee80211_local *local, static void ieee80211_free_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *ctx) { + bool check_single_channel = false; lockdep_assert_held(&local->chanctx_mtx); WARN_ON_ONCE(ctx->refcount != 0); @@ -108,6 +128,14 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, chandef->width = NL80211_CHAN_WIDTH_20_NOHT; chandef->center_freq1 = chandef->chan->center_freq; chandef->center_freq2 = 0; + + /* NOTE: Disabling radar is only valid here for + * single channel context. To be sure, check it ... + */ + if (local->hw.conf.radar_enabled) + check_single_channel = true; + local->hw.conf.radar_enabled = false; + ieee80211_hw_config(local, 0); } else { drv_remove_chanctx(local, ctx); @@ -116,6 +144,9 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, list_del_rcu(&ctx->list); kfree_rcu(ctx, rcu_head); + /* throw a warning if this wasn't the only channel context. */ + WARN_ON(check_single_channel && !list_empty(&local->chanctx_list)); + mutex_lock(&local->mtx); ieee80211_recalc_idle(local); mutex_unlock(&local->mtx); @@ -227,19 +258,11 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx) { - struct ieee80211_sub_if_data *sdata; - bool radar_enabled = false; + bool radar_enabled; lockdep_assert_held(&local->chanctx_mtx); - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { - if (sdata->radar_required) { - radar_enabled = true; - break; - } - } - rcu_read_unlock(); + radar_enabled = ieee80211_is_radar_required(local); if (radar_enabled == chanctx->conf.radar_enabled) return; -- cgit v1.2.3-70-g09d2 From 0eabccd940f0f25da0ae29e555fddb8fb84d8e27 Mon Sep 17 00:00:00 2001 From: Marek Puzyniak Date: Wed, 10 Apr 2013 13:47:45 +0200 Subject: mac80211: clear SSID when stopping AP When AP interface is stopped ssid_len in the BSS configuration isn't cleared which can confuse drivers when switching modes. Set the length to zero when stopping the AP interface. Signed-off-by: Marek Puzyniak Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index edca2a288ab..fdd95bd751a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1052,6 +1052,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) ieee80211_free_keys(sdata); sdata->vif.bss_conf.enable_beacon = false; + sdata->vif.bss_conf.ssid_len = 0; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); -- cgit v1.2.3-70-g09d2 From a21a4d3e8ad4d513f5a6eefc91510febb205f601 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 7 Apr 2013 19:32:47 +0200 Subject: mac80211: always advertise STBC/MCSes even if no AP support Advertise STBC capabilities and MCS rates even if the AP doesn't support them. This has always been the right thing to do, but used to be problematic with some APs. Now WFA testing requires this so re-enable it, problematic APs would then presumably not pass the test and be fixed. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 32 -------------------------------- 1 file changed, 32 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 79647eaecc8..cf40fac0aae 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -604,7 +604,6 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, u8 *pos; u32 cap; struct ieee80211_sta_vht_cap vht_cap; - int i; BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); @@ -632,37 +631,6 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; - if (!(ap_vht_cap->vht_cap_info & - cpu_to_le32(IEEE80211_VHT_CAP_TXSTBC))) - cap &= ~(IEEE80211_VHT_CAP_RXSTBC_1 | - IEEE80211_VHT_CAP_RXSTBC_3 | - IEEE80211_VHT_CAP_RXSTBC_4); - - for (i = 0; i < 8; i++) { - int shift = i * 2; - u16 mask = IEEE80211_VHT_MCS_NOT_SUPPORTED << shift; - u16 ap_mcs, our_mcs; - - ap_mcs = (le16_to_cpu(ap_vht_cap->supp_mcs.tx_mcs_map) & - mask) >> shift; - our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) & - mask) >> shift; - - if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED) - continue; - - switch (ap_mcs) { - default: - if (our_mcs <= ap_mcs) - break; - /* fall through */ - case IEEE80211_VHT_MCS_NOT_SUPPORTED: - vht_cap.vht_mcs.rx_mcs_map &= cpu_to_le16(~mask); - vht_cap.vht_mcs.rx_mcs_map |= - cpu_to_le16(ap_mcs << shift); - } - } - /* reserve and fill IE */ pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); -- cgit v1.2.3-70-g09d2 From 0ca54f6c5fd4ce58aa044d1fc7f00d7f6cf2801c Mon Sep 17 00:00:00 2001 From: Marek Puzyniak Date: Wed, 10 Apr 2013 13:19:13 +0200 Subject: mac80211: provide SSID in IBSS mode Some drivers need SSID in AP and IBSS mode. AP SSID is provided through BSS_CHANGED_SSID notification. There was no easy way to do the same for IBSS. In IBSS mode SSID is known but was not stored in BSS configuration. Extend the AP-mode functionality to also work in IBSS mode. Signed-off-by: Marek Puzyniak Signed-off-by: Johannes Berg --- include/net/mac80211.h | 4 ++-- net/mac80211/ibss.c | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 64faf015dd1..0dde213dd3b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -209,7 +209,7 @@ struct ieee80211_chanctx_conf { * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note * that it is only ever disabled for station mode. * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface. - * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) + * @BSS_CHANGED_SSID: SSID changed for this BSS (AP and IBSS mode) * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface @@ -326,7 +326,7 @@ enum ieee80211_rssi_event { * your driver/device needs to do. * @ps: power-save mode (STA only). This flag is NOT affected by * offchannel/dynamic_ps operations. - * @ssid: The SSID of the current vif. Only valid in AP-mode. + * @ssid: The SSID of the current vif. Valid in AP and IBSS mode. * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. * @txpower: TX power in dBm diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 2a0b2186d98..b7bf6d76f1d 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -209,6 +209,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.beacon_int = beacon_int; sdata->vif.bss_conf.basic_rates = basic_rates; + sdata->vif.bss_conf.ssid_len = ifibss->ssid_len; + memcpy(sdata->vif.bss_conf.ssid, ifibss->ssid, ifibss->ssid_len); bss_change = BSS_CHANGED_BEACON_INT; bss_change |= ieee80211_reset_erp_info(sdata); bss_change |= BSS_CHANGED_BSSID; @@ -217,6 +219,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, bss_change |= BSS_CHANGED_BASIC_RATES; bss_change |= BSS_CHANGED_HT; bss_change |= BSS_CHANGED_IBSS; + bss_change |= BSS_CHANGED_SSID; /* * In 5 GHz/802.11a, we can always use short slot time. @@ -1159,6 +1162,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.ibss_joined = false; sdata->vif.bss_conf.ibss_creator = false; sdata->vif.bss_conf.enable_beacon = false; + sdata->vif.bss_conf.ssid_len = 0; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_IBSS); -- cgit v1.2.3-70-g09d2 From 2419ea14bb0dfabe740f1e005c0782db9bc56441 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 10 Apr 2013 15:41:40 -0700 Subject: mac80211: fix ieee80211_queue_stopped() Johannes Berg notes mac80211 drivers which use ieee80211_queue_stopped() really only want to know if they previously requested a queue stop. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/util.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 447e6651e7f..1d6217ac3ba 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -485,7 +485,8 @@ int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue) return true; spin_lock_irqsave(&local->queue_stop_reason_lock, flags); - ret = !!local->queue_stop_reasons[queue]; + ret = test_bit(IEEE80211_QUEUE_STOP_REASON_DRIVER, + &local->queue_stop_reasons[queue]); spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); return ret; } -- cgit v1.2.3-70-g09d2 From 5253ffb8c9e1f2bf25c2e85dc0be8f74f55cf1ce Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Fri, 5 Apr 2013 12:06:24 +0200 Subject: mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates When the 1st rate control entry is a pre-HT rate we want to set rts_cts_rate_idx "as the fastest basic rate that is not faster than the data rate"(code comments). But in case some bss allowed rate indexes are lower than the lowest bss basic rate, if the rate control selects a rate among the formers for its 1st rate control entry, rts_cts_rate_idx remains 0 and is not a basic rate index. This commit sets rts_cts_rate_idx to the lowest bss basic rate index in this situation. Note that the code assumes that lowest indexes == lowest bitrates. Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index aad0bf5d881..c93483fd477 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -712,19 +712,22 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) } /* - * set up the RTS/CTS rate as the fastest basic rate - * that is not faster than the data rate + * Set up the RTS/CTS rate as the fastest basic rate + * that is not faster than the data rate unless there + * is no basic rate slower than the data rate, in which + * case we pick the slowest basic rate * * XXX: Should this check all retry rates? */ if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { - s8 baserate = 0; + u32 basic_rates = tx->sdata->vif.bss_conf.basic_rates; + s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0; rate = &sband->bitrates[info->control.rates[0].idx]; for (i = 0; i < sband->n_bitrates; i++) { /* must be a basic rate */ - if (!(tx->sdata->vif.bss_conf.basic_rates & BIT(i))) + if (!(basic_rates & BIT(i))) continue; /* must not be faster than the data rate */ if (sband->bitrates[i].bitrate > rate->bitrate) -- cgit v1.2.3-70-g09d2 From 6553bf04ff6686db658e09626edad003809f6baf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 28 Mar 2013 10:26:17 +0100 Subject: mac80211: use second center_freq segment only in 80+80 The field is otherwise reserved, so we shouldn't read and reject it, though any sane system will probably have to set it to 0 anyway. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index cf40fac0aae..2a2c4535449 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -303,12 +303,6 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, channel->band); vht_chandef.center_freq2 = 0; - if (vht_oper->center_freq_seg2_idx) - vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - vht_oper->center_freq_seg2_idx, - channel->band); - switch (vht_oper->chan_width) { case IEEE80211_VHT_CHANWIDTH_USE_HT: vht_chandef.width = chandef->width; @@ -321,6 +315,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, break; case IEEE80211_VHT_CHANWIDTH_80P80MHZ: vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + vht_oper->center_freq_seg2_idx, + channel->band); break; default: if (verbose) -- cgit v1.2.3-70-g09d2 From 37799e52a29af2268d1fbe18908a0d6b9f68af88 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 14:02:26 +0100 Subject: mac80211: unify CSA action frame/beacon processing CSA action frame content should be processed as variable IEs rather than fixed to make it extensible. Unify the code and process them just like CSA in beacons to make it easier to extend for HT/VHT. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 4 +-- net/mac80211/ieee80211_i.h | 4 --- net/mac80211/mlme.c | 71 ++++++++++++++++++++++++++++------------------ net/mac80211/rx.c | 4 --- 4 files changed, 44 insertions(+), 39 deletions(-) (limited to 'net/mac80211') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e46fea8b972..8f80b3a9350 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -840,9 +840,7 @@ struct ieee80211_mgmt { } __packed wme_action; struct{ u8 action_code; - u8 element_id; - u8 length; - struct ieee80211_channel_sw_ie sw_elem; + u8 variable[0]; } __packed chan_switch; struct{ u8 action_code; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8d5dcbf17bb..373460f9c06 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1252,10 +1252,6 @@ void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata); int ieee80211_max_network_latency(struct notifier_block *nb, unsigned long data, void *dummy); int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata); -void -ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - const struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, u64 timestamp); void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2a2c4535449..ade3cd6c337 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1020,33 +1020,37 @@ static void ieee80211_chswitch_timer(unsigned long data) ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work); } -void +static void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - const struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, u64 timestamp) + u64 timestamp, struct ieee802_11_elems *elems) { - struct cfg80211_bss *cbss = - container_of((void *)bss, struct cfg80211_bss, priv); - struct ieee80211_channel *new_ch; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num, - cbss->channel->band); + struct cfg80211_bss *cbss = ifmgd->associated; + struct ieee80211_bss *bss; + struct ieee80211_channel *new_ch; + int new_freq; struct ieee80211_chanctx *chanctx; ASSERT_MGD_MTX(ifmgd); - if (!ifmgd->associated) + if (!cbss) return; if (sdata->local->scanning) return; - /* Disregard subsequent beacons if we are already running a timer - processing a CSA */ - + /* disregard subsequent announcements if we are already processing */ if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) return; + if (!elems->ch_switch_ie) + return; + + bss = (void *)cbss->priv; + + new_freq = ieee80211_channel_to_frequency( + elems->ch_switch_ie->new_ch_num, + cbss->channel->band); new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED) { sdata_info(sdata, @@ -1086,7 +1090,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, sdata->local->csa_channel = new_ch; - if (sw_elem->mode) + if (elems->ch_switch_ie->mode) ieee80211_stop_queues_by_reason(&sdata->local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); @@ -1095,9 +1099,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, /* use driver's channel switch callback */ struct ieee80211_channel_switch ch_switch = { .timestamp = timestamp, - .block_tx = sw_elem->mode, + .block_tx = elems->ch_switch_ie->mode, .channel = new_ch, - .count = sw_elem->count, + .count = elems->ch_switch_ie->count, }; drv_channel_switch(sdata->local, &ch_switch); @@ -1105,11 +1109,11 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, } /* channel switch handled in software */ - if (sw_elem->count <= 1) + if (elems->ch_switch_ie->count <= 1) ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); else mod_timer(&ifmgd->chswitch_timer, - TU_TO_EXP_TIME(sw_elem->count * + TU_TO_EXP_TIME(elems->ch_switch_ie->count * cbss->beacon_interval)); } @@ -2655,7 +2659,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, if (bss) ieee80211_rx_bss_put(local, bss); - if (!sdata->u.mgd.associated) + if (!sdata->u.mgd.associated || + !ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) return; if (need_ps) { @@ -2664,10 +2669,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, mutex_unlock(&local->iflist_mtx); } - if (elems->ch_switch_ie && - memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid, ETH_ALEN) == 0) - ieee80211_sta_process_chanswitch(sdata, elems->ch_switch_ie, - bss, rx_status->mactime); + ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, elems); } @@ -3061,14 +3063,27 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, rma = ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len, &bss); break; case IEEE80211_STYPE_ACTION: - switch (mgmt->u.action.category) { - case WLAN_CATEGORY_SPECTRUM_MGMT: + if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { + struct ieee802_11_elems elems; + int ies_len = skb->len - + offsetof(struct ieee80211_mgmt, + u.action.u.chan_switch.variable); + + if (ies_len < 0) + break; + + ieee802_11_parse_elems( + mgmt->u.action.u.chan_switch.variable, + ies_len, &elems); + + if (elems.parse_error) + break; + ieee80211_sta_process_chanswitch(sdata, - &mgmt->u.action.u.chan_switch.sw_elem, - (void *)ifmgd->associated->priv, - rx_status->mactime); - break; + rx_status->mactime, + &elems); } + break; } mutex_unlock(&ifmgd->mtx); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5168f89c754..e9825f15c14 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2507,10 +2507,6 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) ieee80211_process_measurement_req(sdata, mgmt, len); goto handled; case WLAN_ACTION_SPCT_CHL_SWITCH: - if (len < (IEEE80211_MIN_ACTION_SIZE + - sizeof(mgmt->u.action.u.chan_switch))) - break; - if (sdata->vif.type != NL80211_IFTYPE_STATION) break; -- cgit v1.2.3-70-g09d2 From b4f286a1c0ad0b84c2d502b354d4d98d5a86c64b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 14:13:58 +0100 Subject: mac80211: support extended channel switch Support extended channel switch when the operating class is one of the global operating classes as defined in Annex E of 802.11-2012. If it isn't, disconnect from the AP instead. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 12 ++++++++ net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 77 ++++++++++++++++++++++++++++++---------------- net/mac80211/util.c | 7 +++++ 4 files changed, 71 insertions(+), 26 deletions(-) (limited to 'net/mac80211') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 8f80b3a9350..2a10acc65a5 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -672,6 +672,18 @@ struct ieee80211_channel_sw_ie { u8 count; } __packed; +/** + * struct ieee80211_ext_chansw_ie + * + * This structure represents the "Extended Channel Switch Announcement element" + */ +struct ieee80211_ext_chansw_ie { + u8 mode; + u8 new_operating_class; + u8 new_ch_num; + u8 count; +} __packed; + /** * struct ieee80211_tim * diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 373460f9c06..10c3180b165 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1178,6 +1178,7 @@ struct ieee802_11_elems { const u8 *perr; const struct ieee80211_rann_ie *rann; const struct ieee80211_channel_sw_ie *ch_switch_ie; + const struct ieee80211_ext_chansw_ie *ext_chansw_ie; const u8 *country_elem; const u8 *pwr_constr_elem; const struct ieee80211_timeout_interval_ie *timeout_int; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ade3cd6c337..bc6f87edc62 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1024,56 +1024,79 @@ static void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, u64 timestamp, struct ieee802_11_elems *elems) { + struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_bss *cbss = ifmgd->associated; struct ieee80211_bss *bss; struct ieee80211_channel *new_ch; - int new_freq; struct ieee80211_chanctx *chanctx; + enum ieee80211_band new_band; + int new_freq; + u8 new_chan_no; + u8 count; + u8 mode; ASSERT_MGD_MTX(ifmgd); if (!cbss) return; - if (sdata->local->scanning) + if (local->scanning) return; /* disregard subsequent announcements if we are already processing */ if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) return; - if (!elems->ch_switch_ie) + if (elems->ext_chansw_ie) { + if (!ieee80211_operating_class_to_band( + elems->ext_chansw_ie->new_operating_class, + &new_band)) { + sdata_info(sdata, + "cannot understand ECSA IE operating class %d, disconnecting\n", + elems->ext_chansw_ie->new_operating_class); + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); + } + new_chan_no = elems->ext_chansw_ie->new_ch_num; + count = elems->ext_chansw_ie->count; + mode = elems->ext_chansw_ie->mode; + } else if (elems->ch_switch_ie) { + new_band = cbss->channel->band; + new_chan_no = elems->ch_switch_ie->new_ch_num; + count = elems->ch_switch_ie->count; + mode = elems->ch_switch_ie->mode; + } else { + /* nothing here we understand */ return; + } bss = (void *)cbss->priv; - new_freq = ieee80211_channel_to_frequency( - elems->ch_switch_ie->new_ch_num, - cbss->channel->band); - new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); + new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); + new_ch = ieee80211_get_channel(local->hw.wiphy, new_freq); if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED) { sdata_info(sdata, "AP %pM switches to unsupported channel (%d MHz), disconnecting\n", ifmgd->associated->bssid, new_freq); - ieee80211_queue_work(&sdata->local->hw, + ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); return; } ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; - if (sdata->local->use_chanctx) { + if (local->use_chanctx) { sdata_info(sdata, "not handling channel switch with channel contexts\n"); - ieee80211_queue_work(&sdata->local->hw, + ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); return; } - mutex_lock(&sdata->local->chanctx_mtx); + mutex_lock(&local->chanctx_mtx); if (WARN_ON(!rcu_access_pointer(sdata->vif.chanctx_conf))) { - mutex_unlock(&sdata->local->chanctx_mtx); + mutex_unlock(&local->chanctx_mtx); return; } chanctx = container_of(rcu_access_pointer(sdata->vif.chanctx_conf), @@ -1081,40 +1104,39 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, if (chanctx->refcount > 1) { sdata_info(sdata, "channel switch with multiple interfaces on the same channel, disconnecting\n"); - ieee80211_queue_work(&sdata->local->hw, + ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); - mutex_unlock(&sdata->local->chanctx_mtx); + mutex_unlock(&local->chanctx_mtx); return; } - mutex_unlock(&sdata->local->chanctx_mtx); + mutex_unlock(&local->chanctx_mtx); - sdata->local->csa_channel = new_ch; + local->csa_channel = new_ch; - if (elems->ch_switch_ie->mode) - ieee80211_stop_queues_by_reason(&sdata->local->hw, + if (mode) + ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); - if (sdata->local->ops->channel_switch) { + if (local->ops->channel_switch) { /* use driver's channel switch callback */ struct ieee80211_channel_switch ch_switch = { .timestamp = timestamp, - .block_tx = elems->ch_switch_ie->mode, + .block_tx = mode, .channel = new_ch, - .count = elems->ch_switch_ie->count, + .count = count, }; - drv_channel_switch(sdata->local, &ch_switch); + drv_channel_switch(local, &ch_switch); return; } /* channel switch handled in software */ - if (elems->ch_switch_ie->count <= 1) - ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); + if (count <= 1) + ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work); else mod_timer(&ifmgd->chswitch_timer, - TU_TO_EXP_TIME(elems->ch_switch_ie->count * - cbss->beacon_interval)); + TU_TO_EXP_TIME(count * cbss->beacon_interval)); } static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, @@ -2629,6 +2651,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel; bool need_ps = false; + lockdep_assert_held(&sdata->u.mgd.mtx); + if ((sdata->u.mgd.associated && ether_addr_equal(mgmt->bssid, sdata->u.mgd.associated->bssid)) || (sdata->u.mgd.assoc_data && @@ -2670,6 +2694,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, } ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, elems); + } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1d6217ac3ba..e4a6d559372 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -863,6 +863,13 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, } elems->ch_switch_ie = (void *)pos; break; + case WLAN_EID_EXT_CHANSWITCH_ANN: + if (elen != sizeof(struct ieee80211_ext_chansw_ie)) { + elem_parse_failed = true; + break; + } + elems->ext_chansw_ie = (void *)pos; + break; case WLAN_EID_COUNTRY: elems->country_elem = pos; elems->country_elem_len = elen; -- cgit v1.2.3-70-g09d2 From 85220d71bf3ca1ba9129e0744247ae5f61bec559 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 25 Mar 2013 18:29:27 +0100 Subject: mac80211: support secondary channel offset in CSA Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlegacy/4965-mac.c | 32 ++++++------- drivers/net/wireless/iwlegacy/4965.c | 2 +- drivers/net/wireless/iwlwifi/dvm/devices.c | 10 ++-- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 20 ++++++-- drivers/net/wireless/iwlwifi/dvm/rxon.c | 2 +- drivers/net/wireless/ti/wl12xx/cmd.c | 2 +- drivers/net/wireless/ti/wl18xx/cmd.c | 6 +-- include/linux/ieee80211.h | 11 +++++ include/net/mac80211.h | 4 +- net/mac80211/ieee80211_i.h | 3 +- net/mac80211/mlme.c | 71 +++++++++++++++++++++++------ net/mac80211/trace.h | 8 ++-- net/mac80211/util.c | 8 ++++ 13 files changed, 125 insertions(+), 54 deletions(-) (limited to 'net/mac80211') diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index c092fcbbe96..cb5882ea5f3 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6057,7 +6057,7 @@ il4965_mac_channel_switch(struct ieee80211_hw *hw, struct il_priv *il = hw->priv; const struct il_channel_info *ch_info; struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = ch_switch->channel; + struct ieee80211_channel *channel = ch_switch->chandef.chan; struct il_ht_config *ht_conf = &il->current_ht_config; u16 ch; @@ -6094,23 +6094,21 @@ il4965_mac_channel_switch(struct ieee80211_hw *hw, il->current_ht_config.smps = conf->smps_mode; /* Configure HT40 channels */ - il->ht.enabled = conf_is_ht(conf); - if (il->ht.enabled) { - if (conf_is_ht40_minus(conf)) { - il->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - il->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - il->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - il->ht.is_40mhz = true; - } else { - il->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - il->ht.is_40mhz = false; - } - } else + switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: il->ht.is_40mhz = false; + il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + break; + case NL80211_CHAN_HT40MINUS: + il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; + il->ht.is_40mhz = true; + break; + case NL80211_CHAN_HT40PLUS: + il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + il->ht.is_40mhz = true; + break; + } if ((le16_to_cpu(il->staging.channel) != ch)) il->staging.flags = 0; diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c index 91eb2d07fdb..777a578294b 100644 --- a/drivers/net/wireless/iwlegacy/4965.c +++ b/drivers/net/wireless/iwlegacy/4965.c @@ -1493,7 +1493,7 @@ il4965_hw_channel_switch(struct il_priv *il, cmd.band = band; cmd.expect_beacon = 0; - ch = ch_switch->channel->hw_value; + ch = ch_switch->chandef.chan->hw_value; cmd.channel = cpu_to_le16(ch); cmd.rxon_flags = il->staging.flags; cmd.rxon_filter_flags = il->staging.filter_flags; diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 15cca2ef929..c48907c8ab4 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -379,7 +379,7 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, }; cmd.band = priv->band == IEEE80211_BAND_2GHZ; - ch = ch_switch->channel->hw_value; + ch = ch_switch->chandef.chan->hw_value; IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", ctx->active.channel, ch); cmd.channel = cpu_to_le16(ch); @@ -414,7 +414,8 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, } IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", cmd.switch_time); - cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + cmd.expect_beacon = + ch_switch->chandef.chan->flags & IEEE80211_CHAN_RADAR; return iwl_dvm_send_cmd(priv, &hcmd); } @@ -540,7 +541,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, hcmd.data[0] = cmd; cmd->band = priv->band == IEEE80211_BAND_2GHZ; - ch = ch_switch->channel->hw_value; + ch = ch_switch->chandef.chan->hw_value; IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", ctx->active.channel, ch); cmd->channel = cpu_to_le16(ch); @@ -575,7 +576,8 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, } IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", cmd->switch_time); - cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR; + cmd->expect_beacon = + ch_switch->chandef.chan->flags & IEEE80211_CHAN_RADAR; err = iwl_dvm_send_cmd(priv, &hcmd); kfree(cmd); diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index a7294fa4d7e..2dc101fe0d2 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -967,7 +967,7 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = ch_switch->channel; + struct ieee80211_channel *channel = ch_switch->chandef.chan; struct iwl_ht_config *ht_conf = &priv->current_ht_config; /* * MULTI-FIXME @@ -1005,11 +1005,21 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, priv->current_ht_config.smps = conf->smps_mode; /* Configure HT40 channels */ - ctx->ht.enabled = conf_is_ht(conf); - if (ctx->ht.enabled) - iwlagn_config_ht40(conf, ctx); - else + switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: ctx->ht.is_40mhz = false; + ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + break; + case NL80211_CHAN_HT40MINUS: + ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; + ctx->ht.is_40mhz = true; + break; + case NL80211_CHAN_HT40PLUS: + ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + ctx->ht.is_40mhz = true; + break; + } if ((le16_to_cpu(ctx->staging.channel) != ch)) ctx->staging.flags = 0; diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 085c589e714..acbb50b5f1e 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1160,7 +1160,7 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } void iwlagn_config_ht40(struct ieee80211_conf *conf, - struct iwl_rxon_context *ctx) + struct iwl_rxon_context *ctx) { if (conf_is_ht40_minus(conf)) { ctx->ht.extension_chan_offset = diff --git a/drivers/net/wireless/ti/wl12xx/cmd.c b/drivers/net/wireless/ti/wl12xx/cmd.c index 7dc9f965037..7485dbae8c4 100644 --- a/drivers/net/wireless/ti/wl12xx/cmd.c +++ b/drivers/net/wireless/ti/wl12xx/cmd.c @@ -301,7 +301,7 @@ int wl12xx_cmd_channel_switch(struct wl1271 *wl, } cmd->role_id = wlvif->role_id; - cmd->channel = ch_switch->channel->hw_value; + cmd->channel = ch_switch->chandef.chan->hw_value; cmd->switch_time = ch_switch->count; cmd->stop_tx = ch_switch->block_tx; diff --git a/drivers/net/wireless/ti/wl18xx/cmd.c b/drivers/net/wireless/ti/wl18xx/cmd.c index 1d1f6cc7a50..7649c75cd68 100644 --- a/drivers/net/wireless/ti/wl18xx/cmd.c +++ b/drivers/net/wireless/ti/wl18xx/cmd.c @@ -42,11 +42,11 @@ int wl18xx_cmd_channel_switch(struct wl1271 *wl, } cmd->role_id = wlvif->role_id; - cmd->channel = ch_switch->channel->hw_value; + cmd->channel = ch_switch->chandef.chan->hw_value; cmd->switch_time = ch_switch->count; cmd->stop_tx = ch_switch->block_tx; - switch (ch_switch->channel->band) { + switch (ch_switch->chandef.chan->band) { case IEEE80211_BAND_2GHZ: cmd->band = WLCORE_BAND_2_4GHZ; break; @@ -55,7 +55,7 @@ int wl18xx_cmd_channel_switch(struct wl1271 *wl, break; default: wl1271_error("invalid channel switch band: %d", - ch_switch->channel->band); + ch_switch->chandef.chan->band); ret = -EINVAL; goto out_free; } diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2a10acc65a5..95621528436 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -684,6 +684,16 @@ struct ieee80211_ext_chansw_ie { u8 count; } __packed; +/** + * struct ieee80211_sec_chan_offs_ie - secondary channel offset IE + * @sec_chan_offs: secondary channel offset, uses IEEE80211_HT_PARAM_CHA_SEC_* + * values here + * This structure represents the "Secondary Channel Offset element" + */ +struct ieee80211_sec_chan_offs_ie { + u8 sec_chan_offs; +} __packed; + /** * struct ieee80211_tim * @@ -1648,6 +1658,7 @@ enum ieee80211_eid { WLAN_EID_HT_CAPABILITY = 45, WLAN_EID_HT_OPERATION = 61, + WLAN_EID_SECONDARY_CHANNEL_OFFSET = 62, WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0dde213dd3b..9ff10b33b71 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1017,13 +1017,13 @@ struct ieee80211_conf { * the driver passed into mac80211. * @block_tx: Indicates whether transmission must be blocked before the * scheduled channel switch, as indicated by the AP. - * @channel: the new channel to switch to + * @chandef: the new channel to switch to * @count: the number of TBTT's until the channel switch event */ struct ieee80211_channel_switch { u64 timestamp; bool block_tx; - struct ieee80211_channel *channel; + struct cfg80211_chan_def chandef; u8 count; }; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 10c3180b165..8f240c0ec30 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1019,7 +1019,7 @@ struct ieee80211_local { enum mac80211_scan_state next_scan_state; struct delayed_work scan_work; struct ieee80211_sub_if_data __rcu *scan_sdata; - struct ieee80211_channel *csa_channel; + struct cfg80211_chan_def csa_chandef; /* For backward compatibility only -- do not use */ struct cfg80211_chan_def _oper_chandef; @@ -1183,6 +1183,7 @@ struct ieee802_11_elems { const u8 *pwr_constr_elem; const struct ieee80211_timeout_interval_ie *timeout_int; const u8 *opmode_notif; + const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; /* length of them, respectively */ u8 ssid_len; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index bc6f87edc62..bd581a80e4b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -289,6 +289,8 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, } else { /* 40 MHz (and 80 MHz) must be supported for VHT */ ret = IEEE80211_STA_DISABLE_VHT; + /* also mark 40 MHz disabled */ + ret |= IEEE80211_STA_DISABLE_40MHZ; goto out; } @@ -964,16 +966,7 @@ static void ieee80211_chswitch_work(struct work_struct *work) if (!ifmgd->associated) goto out; - /* - * FIXME: Here we are downgrading to NL80211_CHAN_WIDTH_20_NOHT - * and don't adjust our ht/vht settings - * This is wrong - we should behave according to the CSA params - */ - local->_oper_chandef.chan = local->csa_channel; - local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT; - local->_oper_chandef.center_freq1 = - local->_oper_chandef.chan->center_freq; - local->_oper_chandef.center_freq2 = 0; + local->_oper_chandef = local->csa_chandef; if (!local->ops->channel_switch) { /* call "hw_config" only if doing sw channel switch */ @@ -1028,13 +1021,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_bss *cbss = ifmgd->associated; struct ieee80211_bss *bss; - struct ieee80211_channel *new_ch; struct ieee80211_chanctx *chanctx; enum ieee80211_band new_band; int new_freq; u8 new_chan_no; u8 count; u8 mode; + struct cfg80211_chan_def new_chandef = {}; + int secondary_channel_offset = -1; ASSERT_MGD_MTX(ifmgd); @@ -1048,6 +1042,19 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) return; + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { + /* if HT is enabled and the IE not present, it's still HT */ + secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + if (elems->sec_chan_offs) + secondary_channel_offset = + elems->sec_chan_offs->sec_chan_offs; + } + + if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && + (secondary_channel_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE || + secondary_channel_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)) + secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + if (elems->ext_chansw_ie) { if (!ieee80211_operating_class_to_band( elems->ext_chansw_ie->new_operating_class, @@ -1074,8 +1081,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, bss = (void *)cbss->priv; new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); - new_ch = ieee80211_get_channel(local->hw.wiphy, new_freq); - if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED) { + new_chandef.chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); + if (!new_chandef.chan || + new_chandef.chan->flags & IEEE80211_CHAN_DISABLED) { sdata_info(sdata, "AP %pM switches to unsupported channel (%d MHz), disconnecting\n", ifmgd->associated->bssid, new_freq); @@ -1084,6 +1092,39 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, return; } + switch (secondary_channel_offset) { + default: + /* secondary_channel_offset was present but is invalid */ + case IEEE80211_HT_PARAM_CHA_SEC_NONE: + cfg80211_chandef_create(&new_chandef, new_chandef.chan, + NL80211_CHAN_HT20); + break; + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + cfg80211_chandef_create(&new_chandef, new_chandef.chan, + NL80211_CHAN_HT40PLUS); + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + cfg80211_chandef_create(&new_chandef, new_chandef.chan, + NL80211_CHAN_HT40MINUS); + break; + case -1: + cfg80211_chandef_create(&new_chandef, new_chandef.chan, + NL80211_CHAN_NO_HT); + break; + } + + if (!cfg80211_chandef_usable(local->hw.wiphy, &new_chandef, + IEEE80211_CHAN_DISABLED)) { + sdata_info(sdata, + "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", + ifmgd->associated->bssid, new_freq, + new_chandef.width, new_chandef.center_freq1, + new_chandef.center_freq2); + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); + return; + } + ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; if (local->use_chanctx) { @@ -1111,7 +1152,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, } mutex_unlock(&local->chanctx_mtx); - local->csa_channel = new_ch; + local->csa_chandef = new_chandef; if (mode) ieee80211_stop_queues_by_reason(&local->hw, @@ -1123,7 +1164,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel_switch ch_switch = { .timestamp = timestamp, .block_tx = mode, - .channel = new_ch, + .chandef = new_chandef, .count = count, }; diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 8286dcef228..c215fafd7a2 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -990,23 +990,23 @@ TRACE_EVENT(drv_channel_switch, TP_STRUCT__entry( LOCAL_ENTRY + CHANDEF_ENTRY __field(u64, timestamp) __field(bool, block_tx) - __field(u16, freq) __field(u8, count) ), TP_fast_assign( LOCAL_ASSIGN; + CHANDEF_ASSIGN(&ch_switch->chandef) __entry->timestamp = ch_switch->timestamp; __entry->block_tx = ch_switch->block_tx; - __entry->freq = ch_switch->channel->center_freq; __entry->count = ch_switch->count; ), TP_printk( - LOCAL_PR_FMT " new freq:%u count:%d", - LOCAL_PR_ARG, __entry->freq, __entry->count + LOCAL_PR_FMT " new " CHANDEF_PR_FMT " count:%d", + LOCAL_PR_ARG, CHANDEF_PR_ARG, __entry->count ) ); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e4a6d559372..155056c90ed 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -716,6 +716,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, case WLAN_EID_COUNTRY: case WLAN_EID_PWR_CONSTRAINT: case WLAN_EID_TIMEOUT_INTERVAL: + case WLAN_EID_SECONDARY_CHANNEL_OFFSET: if (test_bit(id, seen_elems)) { elems->parse_error = true; left -= elen; @@ -870,6 +871,13 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, } elems->ext_chansw_ie = (void *)pos; break; + case WLAN_EID_SECONDARY_CHANNEL_OFFSET: + if (elen != sizeof(struct ieee80211_sec_chan_offs_ie)) { + elem_parse_failed = true; + break; + } + elems->sec_chan_offs = (void *)pos; + break; case WLAN_EID_COUNTRY: elems->country_elem = pos; elems->country_elem_len = elen; -- cgit v1.2.3-70-g09d2 From 1b3a2e494bc793445f576c5476e9767cf7621684 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 15:17:18 +0100 Subject: mac80211: handle extended channel switch announcement Handle the (public) extended channel switch announcement action frames. Parts of the data in these frames isn't really in IEs, but put it into the elems struct anyway to simplify the handling. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 6 ++++++ net/mac80211/mlme.c | 31 +++++++++++++++++++++++++++---- net/mac80211/rx.c | 16 ++++++++++++++++ 3 files changed, 49 insertions(+), 4 deletions(-) (limited to 'net/mac80211') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 95621528436..ce07161c873 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -864,6 +864,11 @@ struct ieee80211_mgmt { u8 action_code; u8 variable[0]; } __packed chan_switch; + struct{ + u8 action_code; + struct ieee80211_ext_chansw_ie data; + u8 variable[0]; + } __packed ext_chan_switch; struct{ u8 action_code; u8 dialog_token; @@ -1816,6 +1821,7 @@ enum ieee80211_key_len { /* Public action codes */ enum ieee80211_pub_actioncode { + WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4, WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14, }; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index bd581a80e4b..c53aedb47a6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3100,6 +3100,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, enum rx_mgmt_action rma = RX_MGMT_NONE; u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; u16 fc; + struct ieee802_11_elems elems; + int ies_len; rx_status = (struct ieee80211_rx_status *) skb->cb; mgmt = (struct ieee80211_mgmt *) skb->data; @@ -3130,10 +3132,9 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, break; case IEEE80211_STYPE_ACTION: if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { - struct ieee802_11_elems elems; - int ies_len = skb->len - - offsetof(struct ieee80211_mgmt, - u.action.u.chan_switch.variable); + ies_len = skb->len - + offsetof(struct ieee80211_mgmt, + u.action.u.chan_switch.variable); if (ies_len < 0) break; @@ -3145,6 +3146,28 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, if (elems.parse_error) break; + ieee80211_sta_process_chanswitch(sdata, + rx_status->mactime, + &elems); + } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { + ies_len = skb->len - + offsetof(struct ieee80211_mgmt, + u.action.u.ext_chan_switch.variable); + + if (ies_len < 0) + break; + + ieee802_11_parse_elems( + mgmt->u.action.u.ext_chan_switch.variable, + ies_len, &elems); + + if (elems.parse_error) + break; + + /* for the handling code pretend this was also an IE */ + elems.ext_chansw_ie = + &mgmt->u.action.u.ext_chan_switch.data; + ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, &elems); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index e9825f15c14..643fcf7c9dc 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2424,6 +2424,22 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; + case WLAN_CATEGORY_PUBLIC: + if (len < IEEE80211_MIN_ACTION_SIZE + 1) + goto invalid; + if (sdata->vif.type != NL80211_IFTYPE_STATION) + break; + if (!rx->sta) + break; + if (!ether_addr_equal(mgmt->bssid, sdata->u.mgd.bssid)) + break; + if (mgmt->u.action.u.ext_chan_switch.action_code != + WLAN_PUB_ACTION_EXT_CHANSW_ANN) + break; + if (len < offsetof(struct ieee80211_mgmt, + u.action.u.ext_chan_switch.variable)) + goto invalid; + goto queue; case WLAN_CATEGORY_VHT: if (sdata->vif.type != NL80211_IFTYPE_STATION && sdata->vif.type != NL80211_IFTYPE_MESH_POINT && -- cgit v1.2.3-70-g09d2 From b2e506bfc4d752b68a0ccaae1e977898263eba4c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 14:54:16 +0100 Subject: mac80211: parse VHT channel switch IEs VHT introduces multiple IEs that need to be parsed for a wide bandwidth channel switch. Two are (currently) needed in mac80211: * wide bandwidth channel switch element * channel switch wrapper element The former is contained in the latter for beacons and probe responses, but not for the spectrum management action frames so the IE parser needs a new argument to differentiate them. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 10 ++++++++++ net/mac80211/ibss.c | 2 +- net/mac80211/ieee80211_i.h | 7 ++++--- net/mac80211/mesh.c | 4 ++-- net/mac80211/mesh_hwmp.c | 2 +- net/mac80211/mesh_plink.c | 2 +- net/mac80211/mlme.c | 16 ++++++++-------- net/mac80211/scan.c | 2 +- net/mac80211/util.c | 36 +++++++++++++++++++++++++++++++++++- 9 files changed, 63 insertions(+), 18 deletions(-) (limited to 'net/mac80211') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce07161c873..06b0ed0154a 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -694,6 +694,14 @@ struct ieee80211_sec_chan_offs_ie { u8 sec_chan_offs; } __packed; +/** + * struct ieee80211_wide_bw_chansw_ie - wide bandwidth channel switch IE + */ +struct ieee80211_wide_bw_chansw_ie { + u8 new_channel_width; + u8 new_center_freq_seg0, new_center_freq_seg1; +} __packed; + /** * struct ieee80211_tim * @@ -1698,6 +1706,8 @@ enum ieee80211_eid { WLAN_EID_VHT_CAPABILITY = 191, WLAN_EID_VHT_OPERATION = 192, WLAN_EID_OPMODE_NOTIF = 199, + WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194, + WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196, /* 802.11ad */ WLAN_EID_NON_TX_BSSID_CAP = 83, diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index b7bf6d76f1d..170f9a7fa31 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -914,7 +914,7 @@ void ieee80211_rx_mgmt_probe_beacon(struct ieee80211_sub_if_data *sdata, return; ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, - &elems); + false, &elems); ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8f240c0ec30..f4a65a340a5 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1179,6 +1179,7 @@ struct ieee802_11_elems { const struct ieee80211_rann_ie *rann; const struct ieee80211_channel_sw_ie *ch_switch_ie; const struct ieee80211_ext_chansw_ie *ext_chansw_ie; + const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; const u8 *country_elem; const u8 *pwr_constr_elem; const struct ieee80211_timeout_interval_ie *timeout_int; @@ -1490,13 +1491,13 @@ static inline void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, ieee80211_tx_skb_tid(sdata, skb, 7); } -u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, +u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, u64 filter, u32 crc); -static inline void ieee802_11_parse_elems(u8 *start, size_t len, +static inline void ieee802_11_parse_elems(u8 *start, size_t len, bool action, struct ieee802_11_elems *elems) { - ieee802_11_parse_elems_crc(start, len, elems, 0, 0); + ieee802_11_parse_elems_crc(start, len, action, elems, 0, 0); } u32 ieee80211_mandatory_rates(struct ieee80211_local *local, diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0acc2874d29..4b984765d62 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -838,7 +838,7 @@ ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, if (baselen > len) return; - ieee802_11_parse_elems(pos, len - baselen, &elems); + ieee802_11_parse_elems(pos, len - baselen, false, &elems); /* 802.11-2012 10.1.4.3.2 */ if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && @@ -899,7 +899,7 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, return; ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, - &elems); + false, &elems); /* ignore non-mesh or secure / unsecure mismatch */ if ((!elems.mesh_id || !elems.mesh_config) || diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index c82d5e6a24c..486819cd02c 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -880,7 +880,7 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, baselen = (u8 *) mgmt->u.action.u.mesh_action.variable - (u8 *) mgmt; ieee802_11_parse_elems(mgmt->u.action.u.mesh_action.variable, - len - baselen, &elems); + len - baselen, false, &elems); if (elems.preq) { if (elems.preq_len != 37) diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index cdd41835334..09bebed9941 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -687,7 +687,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, baseaddr += 4; baselen += 4; } - ieee802_11_parse_elems(baseaddr, len - baselen, &elems); + ieee802_11_parse_elems(baseaddr, len - baselen, true, &elems); if (!elems.peering) { mpl_dbg(sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c53aedb47a6..3e0421265bf 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2203,7 +2203,7 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, u32 tx_flags = 0; pos = mgmt->u.auth.variable; - ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); + ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems); if (!elems.challenge) return; auth_data->expected_transaction = 4; @@ -2468,7 +2468,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, } pos = mgmt->u.assoc_resp.variable; - ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); + ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems); if (!elems.supp_rates) { sdata_info(sdata, "no SuppRates element in AssocResp\n"); @@ -2637,7 +2637,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); pos = mgmt->u.assoc_resp.variable; - ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); + ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems); if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && elems.timeout_int && @@ -2760,7 +2760,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, return; ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, - &elems); + false, &elems); ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); @@ -2843,7 +2843,7 @@ ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { ieee802_11_parse_elems(mgmt->u.beacon.variable, - len - baselen, &elems); + len - baselen, false, &elems); ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; @@ -2953,7 +2953,7 @@ ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, - len - baselen, &elems, + len - baselen, false, &elems, care_about_ies, ncrc); if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) { @@ -3141,7 +3141,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems( mgmt->u.action.u.chan_switch.variable, - ies_len, &elems); + ies_len, true, &elems); if (elems.parse_error) break; @@ -3159,7 +3159,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems( mgmt->u.action.u.ext_chan_switch.variable, - ies_len, &elems); + ies_len, true, &elems); if (elems.parse_error) break; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 33fbf104569..99b103921a4 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -181,7 +181,7 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) if (baselen > skb->len) return; - ieee802_11_parse_elems(elements, skb->len - baselen, &elems); + ieee802_11_parse_elems(elements, skb->len - baselen, false, &elems); channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 155056c90ed..3f87fa468b1 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -661,7 +661,7 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, } EXPORT_SYMBOL(ieee80211_queue_delayed_work); -u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, +u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, u64 filter, u32 crc) { @@ -669,6 +669,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, u8 *pos = start; bool calc_crc = filter != 0; DECLARE_BITMAP(seen_elems, 256); + const u8 *ie; bitmap_zero(seen_elems, 256); memset(elems, 0, sizeof(*elems)); @@ -717,6 +718,11 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, case WLAN_EID_PWR_CONSTRAINT: case WLAN_EID_TIMEOUT_INTERVAL: case WLAN_EID_SECONDARY_CHANNEL_OFFSET: + case WLAN_EID_WIDE_BW_CHANNEL_SWITCH: + /* + * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible + * that if the content gets bigger it might be needed more than once + */ if (test_bit(id, seen_elems)) { elems->parse_error = true; left -= elen; @@ -878,6 +884,34 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, } elems->sec_chan_offs = (void *)pos; break; + case WLAN_EID_WIDE_BW_CHANNEL_SWITCH: + if (!action || + elen != sizeof(*elems->wide_bw_chansw_ie)) { + elem_parse_failed = true; + break; + } + elems->wide_bw_chansw_ie = (void *)pos; + break; + case WLAN_EID_CHANNEL_SWITCH_WRAPPER: + if (action) { + elem_parse_failed = true; + break; + } + /* + * This is a bit tricky, but as we only care about + * the wide bandwidth channel switch element, so + * just parse it out manually. + */ + ie = cfg80211_find_ie(WLAN_EID_WIDE_BW_CHANNEL_SWITCH, + pos, elen); + if (ie) { + if (ie[1] == sizeof(*elems->wide_bw_chansw_ie)) + elems->wide_bw_chansw_ie = + (void *)(ie + 2); + else + elem_parse_failed = true; + } + break; case WLAN_EID_COUNTRY: elems->country_elem = pos; elems->country_elem_len = elen; -- cgit v1.2.3-70-g09d2 From cd64f2a9b4a9eb055e4adc14b559055775b1b62f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 28 Mar 2013 10:44:18 +0100 Subject: mac80211: handle wide bandwidth channel switch Parse and react to the wide bandwidth channel switch element in beacons/action frames. Finding the element was done in a previous patch (it has different positions in beacons/action frames), now handle it. If there's something wrong with it simply disconnect. Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 96 +++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 79 insertions(+), 17 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3e0421265bf..43023f0db68 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1027,7 +1027,11 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, u8 new_chan_no; u8 count; u8 mode; + struct ieee80211_channel *new_chan; struct cfg80211_chan_def new_chandef = {}; + struct cfg80211_chan_def new_vht_chandef = {}; + const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; + const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; int secondary_channel_offset = -1; ASSERT_MGD_MTX(ifmgd); @@ -1042,18 +1046,17 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) return; - if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { - /* if HT is enabled and the IE not present, it's still HT */ - secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; - if (elems->sec_chan_offs) - secondary_channel_offset = - elems->sec_chan_offs->sec_chan_offs; + sec_chan_offs = elems->sec_chan_offs; + wide_bw_chansw_ie = elems->wide_bw_chansw_ie; + + if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_40MHZ)) { + sec_chan_offs = NULL; + wide_bw_chansw_ie = NULL; } - if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && - (secondary_channel_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE || - secondary_channel_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)) - secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) + wide_bw_chansw_ie = NULL; if (elems->ext_chansw_ie) { if (!ieee80211_operating_class_to_band( @@ -1081,9 +1084,8 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, bss = (void *)cbss->priv; new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); - new_chandef.chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); - if (!new_chandef.chan || - new_chandef.chan->flags & IEEE80211_CHAN_DISABLED) { + new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); + if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) { sdata_info(sdata, "AP %pM switches to unsupported channel (%d MHz), disconnecting\n", ifmgd->associated->bssid, new_freq); @@ -1092,27 +1094,87 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, return; } + if (sec_chan_offs) { + secondary_channel_offset = sec_chan_offs->sec_chan_offs; + } else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { + /* if HT is enabled and the IE not present, it's still HT */ + secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + } + switch (secondary_channel_offset) { default: /* secondary_channel_offset was present but is invalid */ case IEEE80211_HT_PARAM_CHA_SEC_NONE: - cfg80211_chandef_create(&new_chandef, new_chandef.chan, + cfg80211_chandef_create(&new_chandef, new_chan, NL80211_CHAN_HT20); break; case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - cfg80211_chandef_create(&new_chandef, new_chandef.chan, + cfg80211_chandef_create(&new_chandef, new_chan, NL80211_CHAN_HT40PLUS); break; case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - cfg80211_chandef_create(&new_chandef, new_chandef.chan, + cfg80211_chandef_create(&new_chandef, new_chan, NL80211_CHAN_HT40MINUS); break; case -1: - cfg80211_chandef_create(&new_chandef, new_chandef.chan, + cfg80211_chandef_create(&new_chandef, new_chan, NL80211_CHAN_NO_HT); break; } + if (wide_bw_chansw_ie) { + new_vht_chandef.chan = new_chan; + new_vht_chandef.center_freq1 = + ieee80211_channel_to_frequency( + wide_bw_chansw_ie->new_center_freq_seg0, + new_band); + + switch (wide_bw_chansw_ie->new_channel_width) { + default: + /* hmmm, ignore VHT and use HT if present */ + case IEEE80211_VHT_CHANWIDTH_USE_HT: + new_vht_chandef.chan = NULL; + break; + case IEEE80211_VHT_CHANWIDTH_80MHZ: + new_vht_chandef.width = NL80211_CHAN_WIDTH_80; + break; + case IEEE80211_VHT_CHANWIDTH_160MHZ: + new_vht_chandef.width = NL80211_CHAN_WIDTH_160; + break; + case IEEE80211_VHT_CHANWIDTH_80P80MHZ: + /* field is otherwise reserved */ + new_vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + wide_bw_chansw_ie->new_center_freq_seg1, + new_band); + new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + break; + } + if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) + chandef_downgrade(&new_vht_chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_160) + chandef_downgrade(&new_vht_chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && + new_vht_chandef.width > NL80211_CHAN_WIDTH_20) + chandef_downgrade(&new_vht_chandef); + } + + /* if VHT data is there validate & use it */ + if (new_vht_chandef.chan) { + if (!cfg80211_chandef_compatible(&new_vht_chandef, + &new_chandef)) { + sdata_info(sdata, + "AP %pM CSA has inconsistent channel data, disconnecting\n", + ifmgd->associated->bssid); + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); + return; + } + new_chandef = new_vht_chandef; + } + if (!cfg80211_chandef_usable(local->hw.wiphy, &new_chandef, IEEE80211_CHAN_DISABLED)) { sdata_info(sdata, -- cgit v1.2.3-70-g09d2 From 7a7da6ee0ea3443cd5111adffa80a3daba4bb8df Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Tue, 9 Apr 2013 17:14:09 +0300 Subject: mac80211: remove warning from ieee80211_beacon_loss Currently, mac80211 assumes that connection monitor offload for BSS station implies that the device: - sends periodic keep alive packets to associated AP - monitors missed beacons - actively probes the AP in case of missed beacons In case of poor connection conditions it expects the function ieee80211_connection_loss() to be called by driver. However, some devices implement connection monitor offload excluding active AP probing. To allow them to call ieee80211_beacon_loss() cleanly, remove the warning there and thus allow them to use mac80211 for the AP probing even if connection monitor offload is supported. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 1 - 1 file changed, 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 43023f0db68..c7860d0450d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2215,7 +2215,6 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif) trace_api_beacon_loss(sdata); - WARN_ON(hw->flags & IEEE80211_HW_CONNECTION_MONITOR); sdata->u.mgd.connection_loss = false; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } -- cgit v1.2.3-70-g09d2 From fbd647b17689d584748bad62395cd1161d42d37c Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Mon, 15 Apr 2013 18:28:21 +0200 Subject: mac80211: fix rate control tx handler for VHT rates Handle VHT rates like HT ones, otherwise we easily trigger the pre-HT rates WARN_ON(rc_rate->idx >= sband->n_bitrates) which will set rc_rate->idx to -1. Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c93483fd477..bb82c873f77 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -742,16 +742,18 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) } for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { + struct ieee80211_tx_rate *rc_rate = &info->control.rates[i]; + /* * make sure there's no valid rate following * an invalid one, just in case drivers don't * take the API seriously to stop at -1. */ if (inval) { - info->control.rates[i].idx = -1; + rc_rate->idx = -1; continue; } - if (info->control.rates[i].idx < 0) { + if (rc_rate->idx < 0) { inval = true; continue; } @@ -760,36 +762,37 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) * For now assume MCS is already set up correctly, this * needs to be fixed. */ - if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) { - WARN_ON(info->control.rates[i].idx > 76); + if (rc_rate->flags & IEEE80211_TX_RC_MCS) { + WARN_ON(rc_rate->idx > 76); + continue; + } + + if (rc_rate->flags & IEEE80211_TX_RC_VHT_MCS) { + WARN_ON(ieee80211_rate_get_vht_mcs(rc_rate) > 9); continue; } /* set up RTS protection if desired */ if (rts) - info->control.rates[i].flags |= - IEEE80211_TX_RC_USE_RTS_CTS; + rc_rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; /* RC is busted */ - if (WARN_ON_ONCE(info->control.rates[i].idx >= - sband->n_bitrates)) { - info->control.rates[i].idx = -1; + if (WARN_ON_ONCE(rc_rate->idx >= sband->n_bitrates)) { + rc_rate->idx = -1; continue; } - rate = &sband->bitrates[info->control.rates[i].idx]; + rate = &sband->bitrates[rc_rate->idx]; /* set up short preamble */ if (short_preamble && rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) - info->control.rates[i].flags |= - IEEE80211_TX_RC_USE_SHORT_PREAMBLE; + rc_rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; /* set up G protection */ if (!rts && tx->sdata->vif.bss_conf.use_cts_prot && rate->flags & IEEE80211_RATE_ERP_G) - info->control.rates[i].flags |= - IEEE80211_TX_RC_USE_CTS_PROTECT; + rc_rate->flags |= IEEE80211_TX_RC_USE_CTS_PROTECT; } return TX_CONTINUE; -- cgit v1.2.3-70-g09d2 From fffa4b1c170a3cabc58671495b0ae89ded007199 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Mon, 15 Apr 2013 19:04:06 +0200 Subject: mac80211: adjust initial chandefs assignments in ieee80211_register_hw I noticed that monitor interfaces by default would start on 5GHz while STA/AP ones would start 2GHZ - It stems from the fact that ieee80211_register_hw unnecessarily adjusts the local->monitor_chandef for each band. This avoids this and while at it uses a single dflt_chandef to initialize in one go local->{hw.conf.chandef,_oper_chandef,monitor_chandef} Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/main.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 52136fd5ba9..8a7bfc47d57 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -668,6 +668,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) int channels, max_bitrates; bool supp_ht, supp_vht; netdev_features_t feature_whitelist; + struct cfg80211_chan_def dflt_chandef = {}; static const u32 cipher_suites[] = { /* keep WEP first, it may be removed below */ WLAN_CIPHER_SUITE_WEP40, @@ -745,19 +746,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) sband = local->hw.wiphy->bands[band]; if (!sband) continue; - if (!local->use_chanctx && !local->_oper_chandef.chan) { + + if (!dflt_chandef.chan) { + cfg80211_chandef_create(&dflt_chandef, + &sband->channels[0], + NL80211_CHAN_NO_HT); /* init channel we're on */ - struct cfg80211_chan_def chandef = { - .chan = &sband->channels[0], - .width = NL80211_CHAN_NO_HT, - .center_freq1 = sband->channels[0].center_freq, - .center_freq2 = 0 - }; - local->hw.conf.chandef = local->_oper_chandef = chandef; + if (!local->use_chanctx && !local->_oper_chandef.chan) { + local->hw.conf.chandef = dflt_chandef; + local->_oper_chandef = dflt_chandef; + } + local->monitor_chandef = dflt_chandef; } - cfg80211_chandef_create(&local->monitor_chandef, - &sband->channels[0], - NL80211_CHAN_NO_HT); + channels += sband->n_channels; if (max_bitrates < sband->n_bitrates) -- cgit v1.2.3-70-g09d2 From 2ffbe6d333664a089f17b13aa79eefe38f794bb7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 16 Apr 2013 13:38:42 +0200 Subject: mac80211: fix and optimize MCS mask handling Currently the code always copies the configured MCS mask (even if it is set to default), but only uses it if legacy rates were also masked out. Fix this by adding a flag that tracks whether the configured MCS mask is set to default or not. Optimize the code further by storing a pointer to the configured rate mask in txrc instead of using memcpy. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 4 ++-- net/mac80211/cfg.c | 13 +++++++++++++ net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/rate.c | 9 ++++++--- net/mac80211/tx.c | 10 +++++----- 5 files changed, 28 insertions(+), 10 deletions(-) (limited to 'net/mac80211') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index bc5d8184c48..05dbb978850 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4107,7 +4107,7 @@ void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn); * (deprecated; this will be removed once drivers get updated to use * rate_idx_mask) * @rate_idx_mask: user-requested (legacy) rate mask - * @rate_idx_mcs_mask: user-requested MCS rate mask + * @rate_idx_mcs_mask: user-requested MCS rate mask (NULL if not in use) * @bss: whether this frame is sent out in AP or IBSS mode */ struct ieee80211_tx_rate_control { @@ -4119,7 +4119,7 @@ struct ieee80211_tx_rate_control { bool rts, short_preamble; u8 max_rate_idx; u32 rate_idx_mask; - u8 rate_idx_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; + u8 *rate_idx_mcs_mask; bool bss; }; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index fdd95bd751a..72ab1c0e3ca 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2417,9 +2417,22 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, } for (i = 0; i < IEEE80211_NUM_BANDS; i++) { + struct ieee80211_supported_band *sband = wiphy->bands[i]; + int j; + sdata->rc_rateidx_mask[i] = mask->control[i].legacy; memcpy(sdata->rc_rateidx_mcs_mask[i], mask->control[i].mcs, sizeof(mask->control[i].mcs)); + + sdata->rc_has_mcs_mask[i] = false; + if (!sband) + continue; + + for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) + if (~sdata->rc_rateidx_mcs_mask[i][j]) { + sdata->rc_has_mcs_mask[i] = true; + break; + } } return 0; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index f4a65a340a5..21c1720eee0 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -739,6 +739,8 @@ struct ieee80211_sub_if_data { /* bitmap of allowed (non-MCS) rate indexes for rate control */ u32 rc_rateidx_mask[IEEE80211_NUM_BANDS]; + + bool rc_has_mcs_mask[IEEE80211_NUM_BANDS]; u8 rc_rateidx_mcs_mask[IEEE80211_NUM_BANDS][IEEE80211_HT_MCS_MASK_LEN]; union { diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index dd88381c53b..5d545dd2d05 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -460,9 +460,12 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, * the common case. */ mask = sdata->rc_rateidx_mask[info->band]; - memcpy(mcs_mask, sdata->rc_rateidx_mcs_mask[info->band], - sizeof(mcs_mask)); - if (mask != (1 << txrc->sband->n_bitrates) - 1) { + if (mask != (1 << txrc->sband->n_bitrates) - 1 || txrc->rate_idx_mcs_mask) { + if (txrc->rate_idx_mcs_mask) + memcpy(mcs_mask, txrc->rate_idx_mcs_mask, sizeof(mcs_mask)); + else + memset(mcs_mask, 0xff, sizeof(mcs_mask)); + if (sta) { /* Filter out rates that the STA does not support */ mask &= sta->sta.supp_rates[info->band]; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index bb82c873f77..15c1b286e28 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -642,9 +642,11 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) txrc.max_rate_idx = -1; else txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; - memcpy(txrc.rate_idx_mcs_mask, - tx->sdata->rc_rateidx_mcs_mask[info->band], - sizeof(txrc.rate_idx_mcs_mask)); + + if (tx->sdata->rc_has_mcs_mask[info->band]) + txrc.rate_idx_mcs_mask = + tx->sdata->rc_rateidx_mcs_mask[info->band]; + txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || tx->sdata->vif.type == NL80211_IFTYPE_ADHOC); @@ -2508,8 +2510,6 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, txrc.max_rate_idx = -1; else txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; - memcpy(txrc.rate_idx_mcs_mask, sdata->rc_rateidx_mcs_mask[band], - sizeof(txrc.rate_idx_mcs_mask)); txrc.bss = true; rate_control_get_rate(sdata, NULL, &txrc); -- cgit v1.2.3-70-g09d2 From 991fec091061b901e4fdcc8af4fd25d24a5a7bab Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 16 Apr 2013 13:38:43 +0200 Subject: mac80211: fix CTS protection handling The rates[0] CTS and RTS flags are only set after rate control has been called, so minstrel cannot use them to for setting the number of retries. This patch adds two new flags to explicitly indicate RTS/CTS use. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 4 +++- net/mac80211/rc80211_minstrel.c | 6 ++++-- net/mac80211/tx.c | 8 ++++++++ 3 files changed, 15 insertions(+), 3 deletions(-) (limited to 'net/mac80211') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 05dbb978850..4f693a5c54d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -655,7 +655,9 @@ struct ieee80211_tx_info { struct ieee80211_tx_rate rates[ IEEE80211_TX_MAX_RATES]; s8 rts_cts_rate_idx; - /* 3 bytes free */ + u8 use_rts:1; + u8 use_cts_prot:1; + /* 2 bytes free */ }; /* only needed before rate control */ unsigned long jiffies; diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 1c36c9b4fa4..eda290fb8bd 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -209,9 +209,9 @@ minstrel_get_retry_count(struct minstrel_rate *mr, { unsigned int retry = mr->adjusted_retry_count; - if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) + if (info->control.use_rts) retry = max(2U, min(mr->retry_count_rtscts, retry)); - else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) + else if (info->control.use_cts_prot) retry = max(2U, min(mr->retry_count_cts, retry)); return retry; } @@ -460,6 +460,8 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband, } while ((tx_time < mp->segment_size) && (++mr->retry_count < mp->max_retry)); mr->adjusted_retry_count = mr->retry_count; + if (!(sband->bitrates[i].flags & IEEE80211_RATE_ERP_G)) + mr->retry_count_cts = mr->retry_count; } for (i = n; i < sband->n_bitrates; i++) { diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 15c1b286e28..6ca857f8f42 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -656,6 +656,9 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) txrc.rts = rts = true; } + info->control.use_rts = rts; + info->control.use_cts_prot = tx->sdata->vif.bss_conf.use_cts_prot; + /* * Use short preamble if the BSS can handle it, but not for * management frames unless we know the receiver can handle @@ -766,6 +769,11 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) */ if (rc_rate->flags & IEEE80211_TX_RC_MCS) { WARN_ON(rc_rate->idx > 76); + + if (!(rc_rate->flags & IEEE80211_TX_RC_USE_RTS_CTS) && + tx->sdata->vif.bss_conf.use_cts_prot) + rc_rate->flags |= + IEEE80211_TX_RC_USE_CTS_PROTECT; continue; } -- cgit v1.2.3-70-g09d2 From b20d34c458bc2bbd0a4624f2933581e01e72d875 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 17 Apr 2013 11:26:40 +0200 Subject: mac80211: fix station entry leak/warning while suspending Since Stanislaw's patches, when suspending while connected, cfg80211 will disconnect. This causes the AP station to be removed, which uses call_rcu() to clean up. Due to needing process context, this queues a work struct on the mac80211 workqueue. This will warn and fail when already suspended, which can happen if the rcu call doesn't happen quickly. To fix this, replace the synchronize_net() which is really just synchronize_rcu_expedited() with rcu_barrier(), which unlike synchronize_rcu() waits until RCU callback have run and thus avoids this issue. In theory, this can even happen without Stanislaw's change to disconnect on suspend since userspace might disconnect just before suspending, though then it's unlikely that the call_rcu() will be delayed long enough. Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Johannes Berg --- net/mac80211/pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index d1c021b62fe..4431f0ffe15 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -37,8 +37,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_SUSPEND); - /* flush out all packets */ - synchronize_net(); + /* flush out all packets and station cleanup call_rcu()s */ + rcu_barrier(); ieee80211_flush_queues(local, NULL); -- cgit v1.2.3-70-g09d2 From e1c3b15dd33a7d990188fa5b4731c78f8ba416a4 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Wed, 17 Apr 2013 14:08:26 +0200 Subject: mac80211: cosmetics for minstrel_debugfs This changes the minstrel stats ouput from: rate throughput ewma prob this prob this succ/attempt success attempts BCD 6 0.0 0.0 0.0 0( 0) 0 0 to: rate throughput ewma prob this prob this succ/attempt success attempts BCD 6 0.0 0.0 0.0 0( 0) 0 0 Signed-off-by: Karl Beldan Acked-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel_debugfs.c b/net/mac80211/rc80211_minstrel_debugfs.c index d1048348d39..fd0b9ca1570 100644 --- a/net/mac80211/rc80211_minstrel_debugfs.c +++ b/net/mac80211/rc80211_minstrel_debugfs.c @@ -68,7 +68,7 @@ minstrel_stats_open(struct inode *inode, struct file *file) file->private_data = ms; p = ms->buf; - p += sprintf(p, "rate throughput ewma prob this prob " + p += sprintf(p, "rate throughput ewma prob this prob " "this succ/attempt success attempts\n"); for (i = 0; i < mi->n_rates; i++) { struct minstrel_rate *mr = &mi->r[i]; @@ -86,7 +86,7 @@ minstrel_stats_open(struct inode *inode, struct file *file) eprob = MINSTREL_TRUNC(mr->probability * 1000); p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u(%3u) %8llu %8llu\n", + " %3u(%3u) %8llu %8llu\n", tp / 10, tp % 10, eprob / 10, eprob % 10, prob / 10, prob % 10, -- cgit v1.2.3-70-g09d2 From eea85999eca4d7f3528010cd8277392cd56ba713 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Wed, 17 Apr 2013 13:43:22 +0200 Subject: mac80211: optimize minstrel_ewma Use powers of two in ewma of minstrel. This changes : - EWMA_DIV from 100 to 2^7 - EWMA_LEVEL from 75 (/EWMA_DIV=100) to 2^6 + 2^5 (/EWMA_DIV=128) Note that this changes EWMA_DIV - EWMA_LEVEL from 25 to 2^5 and keeps EWMA_LEVEL / EWMA_DIV == 0.75. Signed-off-by: Karl Beldan Acked-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel.h b/net/mac80211/rc80211_minstrel.h index 85ebf42cb46..b9f8535fa15 100644 --- a/net/mac80211/rc80211_minstrel.h +++ b/net/mac80211/rc80211_minstrel.h @@ -9,7 +9,8 @@ #ifndef __RC_MINSTREL_H #define __RC_MINSTREL_H -#define EWMA_LEVEL 75 /* ewma weighting factor [%] */ +#define EWMA_LEVEL 96 /* ewma weighting factor [/EWMA_DIV] */ +#define EWMA_DIV 128 #define SAMPLE_COLUMNS 10 /* number of columns in sample table */ @@ -27,7 +28,7 @@ static inline int minstrel_ewma(int old, int new, int weight) { - return (new * (100 - weight) + old * weight) / 100; + return (new * (EWMA_DIV - weight) + old * weight) / EWMA_DIV; } -- cgit v1.2.3-70-g09d2 From 1b737f88dc1b05cf571e96d42f748aaff6df1eb5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 18 Apr 2013 23:42:19 +0200 Subject: mac80211: fix P2P-Device management frame RX There's an issue in receiving broadcast management frames on P2P Device virtual interfaces, such frames have the RX flag IEEE80211_RX_RA_MATCH cleared and are thus dropped in ieee80211_rx_h_mgmt_check(). They should be let through to make it to ieee80211_rx_h_userspace_mgmt() and then to userspace. Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 643fcf7c9dc..14b32a4cd7b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -3043,7 +3043,8 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx, !ieee80211_is_probe_resp(hdr->frame_control) && !ieee80211_is_beacon(hdr->frame_control)) return 0; - if (!ether_addr_equal(sdata->vif.addr, hdr->addr1)) + if (!ether_addr_equal(sdata->vif.addr, hdr->addr1) && + !multicast) status->rx_flags &= ~IEEE80211_RX_RA_MATCH; break; default: -- cgit v1.2.3-70-g09d2 From 908f8d07e9774c2476e0683f6a0ce50562a2da45 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 7 Apr 2013 09:53:30 +0300 Subject: mac80211: indicate admission control in TX queue parameters Some driver implementations need to know whether mandatory admission control is required by the AP for some ACs. Add a parameter to the TX queue parameters indicating this. As there's currently no support for admission control in mac80211's AP implementation, it's only ever set for the client implementation. Signed-off-by: Alexander Bondar Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ net/mac80211/mlme.c | 1 + 2 files changed, 3 insertions(+) (limited to 'net/mac80211') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4f693a5c54d..b77d57a070e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -128,6 +128,7 @@ enum ieee80211_ac_numbers { * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled + * @acm: is mandatory admission control required for the access category * @uapsd: is U-APSD mode enabled for the queue */ struct ieee80211_tx_queue_params { @@ -135,6 +136,7 @@ struct ieee80211_tx_queue_params { u16 cw_min; u16 cw_max; u8 aifs; + bool acm; bool uapsd; }; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f7beb12abde..13bb81402e1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1661,6 +1661,7 @@ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4); params.cw_min = ecw2cw(pos[1] & 0x0f); params.txop = get_unaligned_le16(pos + 2); + params.acm = acm; params.uapsd = uapsd; mlme_dbg(sdata, -- cgit v1.2.3-70-g09d2 From 8ceb59557bdc373e532b87d4142ce27e04218f0e Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 18 Apr 2013 18:26:49 -0400 Subject: mac80211: use synchronize_rcu() with rcu_barrier() The RCU docs used to state that rcu_barrier() included a wait for an RCU grace period; however the comments for rcu_barrier() as of commit f0a0e6f... "rcu: Clarify memory-ordering properties of grace-period primitives" contradict this. So add back synchronize_{rcu,net}() to where they once were, but keep the rcu_barrier()s for the call_rcu() callbacks. Cc: stable Signed-off-by: Bob Copeland Reviewed-by: Paul E. McKenney Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 1 + net/mac80211/iface.c | 5 +++-- net/mac80211/pm.c | 1 + 3 files changed, 5 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 490990e3fc3..1a89c80e640 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1043,6 +1043,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) sta_info_flush_defer(vlan); sta_info_flush_defer(sdata); + synchronize_net(); rcu_barrier(); list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) { sta_info_flush_cleanup(vlan); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 146b1320af4..9daa64ee337 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -839,11 +839,12 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * * sta_info_flush_cleanup() requires rcu_barrier() * first to wait for the station call_rcu() calls - * to complete, here we need at least sychronize_rcu() - * it to wait for the RX path in case it is using the + * to complete, and we also need synchronize_rcu() + * to wait for the RX path in case it is using the * interface and enqueuing frames at this very time on * another CPU. */ + synchronize_rcu(); rcu_barrier(); sta_info_flush_cleanup(sdata); diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 4431f0ffe15..7fc5d0d8149 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -38,6 +38,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) IEEE80211_QUEUE_STOP_REASON_SUSPEND); /* flush out all packets and station cleanup call_rcu()s */ + synchronize_net(); rcu_barrier(); ieee80211_flush_queues(local, NULL); -- cgit v1.2.3-70-g09d2 From c2eb5b0f342c9b1c2e1d77680af71940fc997779 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Thu, 18 Apr 2013 14:26:20 +0200 Subject: mac80211: minstrel_ht: pick only supported rates for sta and group max*rates minstrel_ht initializes max_tp_rate max_tp_rate2 and max_prob_rate to zero both for minstrel_ht_sta and minstrel_mcs_group_data. This is wrong since there is no guarantee that the 1st rate of any group is supported. Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index d2b264d1311..a23a5cff0af 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -244,6 +244,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) struct minstrel_rate_stats *mr; int cur_prob, cur_prob_tp, cur_tp, cur_tp2; int group, i, index; + bool mi_rates_valid = false; if (mi->ampdu_packets > 0) { mi->avg_ampdu_len = minstrel_ewma(mi->avg_ampdu_len, @@ -254,11 +255,10 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) mi->sample_slow = 0; mi->sample_count = 0; - mi->max_tp_rate = 0; - mi->max_tp_rate2 = 0; - mi->max_prob_rate = 0; for (group = 0; group < ARRAY_SIZE(minstrel_mcs_groups); group++) { + bool mg_rates_valid = false; + cur_prob = 0; cur_prob_tp = 0; cur_tp = 0; @@ -268,15 +268,24 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) if (!mg->supported) continue; - mg->max_tp_rate = 0; - mg->max_tp_rate2 = 0; - mg->max_prob_rate = 0; mi->sample_count++; for (i = 0; i < MCS_GROUP_RATES; i++) { if (!(mg->supported & BIT(i))) continue; + /* initialize rates selections starting indexes */ + if (!mg_rates_valid) { + mg->max_tp_rate = mg->max_tp_rate2 = + mg->max_prob_rate = i; + if (!mi_rates_valid) { + mi->max_tp_rate = mi->max_tp_rate2 = + mi->max_prob_rate = i; + mi_rates_valid = true; + } + mg_rates_valid = true; + } + mr = &mg->rates[i]; mr->retry_updated = false; index = MCS_GROUP_RATES * group + i; -- cgit v1.2.3-70-g09d2 From a36473621c871df14bbf2106ab0721b475aac8e0 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Thu, 18 Apr 2013 14:26:21 +0200 Subject: mac80211: minstrel_ht: initialize rates selection Initialize {mp,mi}->{max_tp_rate,max_tp_rate2,max_prob_rate} in minstrel_ht's rate_init and rate_update. Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index a23a5cff0af..a8e979e8f6b 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -907,6 +907,9 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, if (!n_supported) goto use_legacy; + /* init {mi,mi->groups[*]}->{max_tp_rate,max_tp_rate2,max_prob_rate} */ + minstrel_ht_update_stats(mp, mi); + return; use_legacy: -- cgit v1.2.3-70-g09d2 From 0d528d85c519b755b6f4e1bafa3a39984370e1c1 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 22 Apr 2013 16:14:41 +0200 Subject: mac80211: improve the rate control API Allow rate control modules to pass a rate selection table to mac80211 and the driver. This allows drivers to fetch the most recent rate selection from the sta pointer for already buffered frames. This allows rate control to respond faster to sudden link changes and it is also a step towards adding minstrel_ht support to drivers like iwlwifi. When a driver sets IEEE80211_HW_SUPPORTS_RC_TABLE, mac80211 will not fill info->control.rates with rates from the rate table (to preserve explicit overrides by the rate control module). The driver then explicitly calls ieee80211_get_tx_rates to merge overrides from info->control.rates with defaults from the sta rate table. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 66 +++++++++ net/mac80211/ieee80211_i.h | 1 + net/mac80211/rate.c | 327 +++++++++++++++++++++++++++++++++++++-------- net/mac80211/tx.c | 142 +++++--------------- 4 files changed, 369 insertions(+), 167 deletions(-) (limited to 'net/mac80211') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b77d57a070e..04c2d4670dc 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -563,6 +563,9 @@ enum mac80211_rate_control_flags { /* maximum number of rate stages */ #define IEEE80211_TX_MAX_RATES 4 +/* maximum number of rate table entries */ +#define IEEE80211_TX_RATE_TABLE_SIZE 4 + /** * struct ieee80211_tx_rate - rate selection/status * @@ -659,6 +662,8 @@ struct ieee80211_tx_info { s8 rts_cts_rate_idx; u8 use_rts:1; u8 use_cts_prot:1; + u8 short_preamble:1; + u8 skip_table:1; /* 2 bytes free */ }; /* only needed before rate control */ @@ -680,6 +685,8 @@ struct ieee80211_tx_info { struct { struct ieee80211_tx_rate driver_rates[ IEEE80211_TX_MAX_RATES]; + u8 pad[4]; + void *rate_driver_data[ IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)]; }; @@ -1224,6 +1231,24 @@ enum ieee80211_sta_rx_bandwidth { IEEE80211_STA_RX_BW_160, }; +/** + * struct ieee80211_sta_rates - station rate selection table + * + * @rcu_head: RCU head used for freeing the table on update + * @rates: transmit rates/flags to be used by default. + * Overriding entries per-packet is possible by using cb tx control. + */ +struct ieee80211_sta_rates { + struct rcu_head rcu_head; + struct { + s8 idx; + u8 count; + u8 count_cts; + u8 count_rts; + u16 flags; + } rate[IEEE80211_TX_RATE_TABLE_SIZE]; +}; + /** * struct ieee80211_sta - station table entry * @@ -1251,6 +1276,7 @@ enum ieee80211_sta_rx_bandwidth { * notifications and capabilities. The value is only valid after * the station moves to associated state. * @smps_mode: current SMPS mode (off, static or dynamic) + * @tx_rates: rate control selection table */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1264,6 +1290,7 @@ struct ieee80211_sta { u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; enum ieee80211_smps_mode smps_mode; + struct ieee80211_sta_rates __rcu *rates; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -1419,6 +1446,9 @@ struct ieee80211_tx_control { * for different virtual interfaces. See the doc section on HW queue * control for more details. * + * @IEEE80211_HW_SUPPORTS_RC_TABLE: The driver supports using a rate + * selection table provided by the rate control algorithm. + * * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. @@ -1451,6 +1481,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, + IEEE80211_HW_SUPPORTS_RC_TABLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; @@ -3136,6 +3167,25 @@ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, void ieee80211_sta_set_buffered(struct ieee80211_sta *sta, u8 tid, bool buffered); +/** + * ieee80211_get_tx_rates - get the selected transmit rates for a packet + * + * Call this function in a driver with per-packet rate selection support + * to combine the rate info in the packet tx info with the most recent + * rate selection table for the station entry. + * + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @sta: the receiver station to which this packet is sent. + * @skb: the frame to be transmitted. + * @dest: buffer for extracted rate/retry information + * @max_rates: maximum number of rates to fetch + */ +void ieee80211_get_tx_rates(struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct sk_buff *skb, + struct ieee80211_tx_rate *dest, + int max_rates); + /** * ieee80211_tx_status - transmit status callback * @@ -4212,6 +4262,22 @@ bool rate_usable_index_exists(struct ieee80211_supported_band *sband, return false; } +/** + * rate_control_set_rates - pass the sta rate selection to mac80211/driver + * + * When not doing a rate control probe to test rates, rate control should pass + * its rate selection to mac80211. If the driver supports receiving a station + * rate table, it will use it to ensure that frames are always sent based on + * the most recent rate control module decision. + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @pubsta: &struct ieee80211_sta pointer to the target destination. + * @rates: new tx rate set to be used for this station. + */ +int rate_control_set_rates(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, + struct ieee80211_sta_rates *rates); + int ieee80211_rate_control_register(struct rate_control_ops *ops); void ieee80211_rate_control_unregister(struct rate_control_ops *ops); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index af8410e1291..158e6eb188d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -156,6 +156,7 @@ struct ieee80211_tx_data { struct ieee80211_sub_if_data *sdata; struct sta_info *sta; struct ieee80211_key *key; + struct ieee80211_tx_rate rate; unsigned int flags; }; diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c index 5d545dd2d05..0d51877efdb 100644 --- a/net/mac80211/rate.c +++ b/net/mac80211/rate.c @@ -252,6 +252,25 @@ rate_lowest_non_cck_index(struct ieee80211_supported_band *sband, return 0; } +static void __rate_control_send_low(struct ieee80211_hw *hw, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, + struct ieee80211_tx_info *info) +{ + if ((sband->band != IEEE80211_BAND_2GHZ) || + !(info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)) + info->control.rates[0].idx = rate_lowest_index(sband, sta); + else + info->control.rates[0].idx = + rate_lowest_non_cck_index(sband, sta); + + info->control.rates[0].count = + (info->flags & IEEE80211_TX_CTL_NO_ACK) ? + 1 : hw->max_rate_tries; + + info->control.skip_table = 1; +} + bool rate_control_send_low(struct ieee80211_sta *sta, void *priv_sta, @@ -262,16 +281,8 @@ bool rate_control_send_low(struct ieee80211_sta *sta, int mcast_rate; if (!sta || !priv_sta || rc_no_data_or_no_ack_use_min(txrc)) { - if ((sband->band != IEEE80211_BAND_2GHZ) || - !(info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)) - info->control.rates[0].idx = - rate_lowest_index(txrc->sband, sta); - else - info->control.rates[0].idx = - rate_lowest_non_cck_index(txrc->sband, sta); - info->control.rates[0].count = - (info->flags & IEEE80211_TX_CTL_NO_ACK) ? - 1 : txrc->hw->max_rate_tries; + __rate_control_send_low(txrc->hw, sband, sta, info); + if (!sta && txrc->bss) { mcast_rate = txrc->bss_conf->mcast_rate[sband->band]; if (mcast_rate > 0) { @@ -355,7 +366,8 @@ static bool rate_idx_match_mcs_mask(struct ieee80211_tx_rate *rate, static void rate_idx_match_mask(struct ieee80211_tx_rate *rate, - struct ieee80211_tx_rate_control *txrc, + struct ieee80211_supported_band *sband, + enum nl80211_chan_width chan_width, u32 mask, u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]) { @@ -375,27 +387,17 @@ static void rate_idx_match_mask(struct ieee80211_tx_rate *rate, IEEE80211_TX_RC_USE_SHORT_PREAMBLE); alt_rate.count = rate->count; if (rate_idx_match_legacy_mask(&alt_rate, - txrc->sband->n_bitrates, - mask)) { + sband->n_bitrates, mask)) { *rate = alt_rate; return; } } else { - struct sk_buff *skb = txrc->skb; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - __le16 fc; - /* handle legacy rates */ - if (rate_idx_match_legacy_mask(rate, txrc->sband->n_bitrates, - mask)) + if (rate_idx_match_legacy_mask(rate, sband->n_bitrates, mask)) return; /* if HT BSS, and we handle a data frame, also try HT rates */ - if (txrc->bss_conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT) - return; - - fc = hdr->frame_control; - if (!ieee80211_is_data(fc)) + if (chan_width == NL80211_CHAN_WIDTH_20_NOHT) return; alt_rate.idx = 0; @@ -408,7 +410,7 @@ static void rate_idx_match_mask(struct ieee80211_tx_rate *rate, alt_rate.flags |= IEEE80211_TX_RC_MCS; - if (txrc->bss_conf->chandef.width == NL80211_CHAN_WIDTH_40) + if (chan_width == NL80211_CHAN_WIDTH_40) alt_rate.flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (rate_idx_match_mcs_mask(&alt_rate, mcs_mask)) { @@ -426,6 +428,228 @@ static void rate_idx_match_mask(struct ieee80211_tx_rate *rate, */ } +static void rate_fixup_ratelist(struct ieee80211_vif *vif, + struct ieee80211_supported_band *sband, + struct ieee80211_tx_info *info, + struct ieee80211_tx_rate *rates, + int max_rates) +{ + struct ieee80211_rate *rate; + bool inval = false; + int i; + + /* + * Set up the RTS/CTS rate as the fastest basic rate + * that is not faster than the data rate unless there + * is no basic rate slower than the data rate, in which + * case we pick the slowest basic rate + * + * XXX: Should this check all retry rates? + */ + if (!(rates[0].flags & IEEE80211_TX_RC_MCS)) { + u32 basic_rates = vif->bss_conf.basic_rates; + s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0; + + rate = &sband->bitrates[rates[0].idx]; + + for (i = 0; i < sband->n_bitrates; i++) { + /* must be a basic rate */ + if (!(basic_rates & BIT(i))) + continue; + /* must not be faster than the data rate */ + if (sband->bitrates[i].bitrate > rate->bitrate) + continue; + /* maximum */ + if (sband->bitrates[baserate].bitrate < + sband->bitrates[i].bitrate) + baserate = i; + } + + info->control.rts_cts_rate_idx = baserate; + } + + for (i = 0; i < max_rates; i++) { + /* + * make sure there's no valid rate following + * an invalid one, just in case drivers don't + * take the API seriously to stop at -1. + */ + if (inval) { + rates[i].idx = -1; + continue; + } + if (rates[i].idx < 0) { + inval = true; + continue; + } + + /* + * For now assume MCS is already set up correctly, this + * needs to be fixed. + */ + if (rates[i].flags & IEEE80211_TX_RC_MCS) { + WARN_ON(rates[i].idx > 76); + + if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) && + info->control.use_cts_prot) + rates[i].flags |= + IEEE80211_TX_RC_USE_CTS_PROTECT; + continue; + } + + if (rates[i].flags & IEEE80211_TX_RC_VHT_MCS) { + WARN_ON(ieee80211_rate_get_vht_mcs(&rates[i]) > 9); + continue; + } + + /* set up RTS protection if desired */ + if (info->control.use_rts) { + rates[i].flags |= IEEE80211_TX_RC_USE_RTS_CTS; + info->control.use_cts_prot = false; + } + + /* RC is busted */ + if (WARN_ON_ONCE(rates[i].idx >= sband->n_bitrates)) { + rates[i].idx = -1; + continue; + } + + rate = &sband->bitrates[rates[i].idx]; + + /* set up short preamble */ + if (info->control.short_preamble && + rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) + rates[i].flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; + + /* set up G protection */ + if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) && + info->control.use_cts_prot && + rate->flags & IEEE80211_RATE_ERP_G) + rates[i].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT; + } +} + + +static void rate_control_fill_sta_table(struct ieee80211_sta *sta, + struct ieee80211_tx_info *info, + struct ieee80211_tx_rate *rates, + int max_rates) +{ + struct ieee80211_sta_rates *ratetbl = NULL; + int i; + + if (sta && !info->control.skip_table) + ratetbl = rcu_dereference(sta->rates); + + /* Fill remaining rate slots with data from the sta rate table. */ + max_rates = min_t(int, max_rates, IEEE80211_TX_RATE_TABLE_SIZE); + for (i = 0; i < max_rates; i++) { + if (i < ARRAY_SIZE(info->control.rates) && + info->control.rates[i].idx >= 0 && + info->control.rates[i].count) { + if (rates != info->control.rates) + rates[i] = info->control.rates[i]; + } else if (ratetbl) { + rates[i].idx = ratetbl->rate[i].idx; + rates[i].flags = ratetbl->rate[i].flags; + if (info->control.use_rts) + rates[i].count = ratetbl->rate[i].count_rts; + else if (info->control.use_cts_prot) + rates[i].count = ratetbl->rate[i].count_cts; + else + rates[i].count = ratetbl->rate[i].count; + } else { + rates[i].idx = -1; + rates[i].count = 0; + } + + if (rates[i].idx < 0 || !rates[i].count) + break; + } +} + +static void rate_control_apply_mask(struct ieee80211_sub_if_data *sdata, + struct ieee80211_sta *sta, + struct ieee80211_supported_band *sband, + struct ieee80211_tx_info *info, + struct ieee80211_tx_rate *rates, + int max_rates) +{ + enum nl80211_chan_width chan_width; + u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; + bool has_mcs_mask; + u32 mask; + int i; + + /* + * Try to enforce the rateidx mask the user wanted. skip this if the + * default mask (allow all rates) is used to save some processing for + * the common case. + */ + mask = sdata->rc_rateidx_mask[info->band]; + has_mcs_mask = sdata->rc_has_mcs_mask[info->band]; + if (mask == (1 << sband->n_bitrates) - 1 && !has_mcs_mask) + return; + + if (has_mcs_mask) + memcpy(mcs_mask, sdata->rc_rateidx_mcs_mask[info->band], + sizeof(mcs_mask)); + else + memset(mcs_mask, 0xff, sizeof(mcs_mask)); + + if (sta) { + /* Filter out rates that the STA does not support */ + mask &= sta->supp_rates[info->band]; + for (i = 0; i < sizeof(mcs_mask); i++) + mcs_mask[i] &= sta->ht_cap.mcs.rx_mask[i]; + } + + /* + * Make sure the rate index selected for each TX rate is + * included in the configured mask and change the rate indexes + * if needed. + */ + chan_width = sdata->vif.bss_conf.chandef.width; + for (i = 0; i < max_rates; i++) { + /* Skip invalid rates */ + if (rates[i].idx < 0) + break; + + rate_idx_match_mask(&rates[i], sband, mask, chan_width, + mcs_mask); + } +} + +void ieee80211_get_tx_rates(struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct sk_buff *skb, + struct ieee80211_tx_rate *dest, + int max_rates) +{ + struct ieee80211_sub_if_data *sdata; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_supported_band *sband; + + rate_control_fill_sta_table(sta, info, dest, max_rates); + + if (!vif) + return; + + sdata = vif_to_sdata(vif); + sband = sdata->local->hw.wiphy->bands[info->band]; + + if (ieee80211_is_data(hdr->frame_control)) + rate_control_apply_mask(sdata, sta, sband, info, dest, max_rates); + + if (dest[0].idx < 0) + __rate_control_send_low(&sdata->local->hw, sband, sta, info); + + if (sta) + rate_fixup_ratelist(vif, sband, info, dest, max_rates); +} +EXPORT_SYMBOL(ieee80211_get_tx_rates); + void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_tx_rate_control *txrc) @@ -435,8 +659,6 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta *ista = NULL; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); int i; - u32 mask; - u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) { ista = &sta->sta; @@ -454,40 +676,27 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); - /* - * Try to enforce the rateidx mask the user wanted. skip this if the - * default mask (allow all rates) is used to save some processing for - * the common case. - */ - mask = sdata->rc_rateidx_mask[info->band]; - if (mask != (1 << txrc->sband->n_bitrates) - 1 || txrc->rate_idx_mcs_mask) { - if (txrc->rate_idx_mcs_mask) - memcpy(mcs_mask, txrc->rate_idx_mcs_mask, sizeof(mcs_mask)); - else - memset(mcs_mask, 0xff, sizeof(mcs_mask)); - - if (sta) { - /* Filter out rates that the STA does not support */ - mask &= sta->sta.supp_rates[info->band]; - for (i = 0; i < sizeof(mcs_mask); i++) - mcs_mask[i] &= sta->sta.ht_cap.mcs.rx_mask[i]; - } - /* - * Make sure the rate index selected for each TX rate is - * included in the configured mask and change the rate indexes - * if needed. - */ - for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { - /* Skip invalid rates */ - if (info->control.rates[i].idx < 0) - break; - rate_idx_match_mask(&info->control.rates[i], txrc, - mask, mcs_mask); - } - } + if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_RC_TABLE) + return; + + ieee80211_get_tx_rates(&sdata->vif, ista, txrc->skb, + info->control.rates, + ARRAY_SIZE(info->control.rates)); +} - BUG_ON(info->control.rates[0].idx < 0); +int rate_control_set_rates(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, + struct ieee80211_sta_rates *rates) +{ + struct ieee80211_sta_rates *old = rcu_dereference(pubsta->rates); + + rcu_assign_pointer(pubsta->rates, rates); + if (old) + kfree_rcu(old, rcu_head); + + return 0; } +EXPORT_SYMBOL(rate_control_set_rates); int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local, const char *name) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 6ca857f8f42..4a5fbf83cd1 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -48,15 +48,15 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); /* assume HW handles this */ - if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS) + if (tx->rate.flags & IEEE80211_TX_RC_MCS) return 0; /* uh huh? */ - if (WARN_ON_ONCE(info->control.rates[0].idx < 0)) + if (WARN_ON_ONCE(tx->rate.idx < 0)) return 0; sband = local->hw.wiphy->bands[info->band]; - txrate = &sband->bitrates[info->control.rates[0].idx]; + txrate = &sband->bitrates[tx->rate.idx]; erp = txrate->flags & IEEE80211_RATE_ERP_G; @@ -617,11 +617,9 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); struct ieee80211_hdr *hdr = (void *)tx->skb->data; struct ieee80211_supported_band *sband; - struct ieee80211_rate *rate; - int i; u32 len; - bool inval = false, rts = false, short_preamble = false; struct ieee80211_tx_rate_control txrc; + struct ieee80211_sta_rates *ratetbl = NULL; bool assoc = false; memset(&txrc, 0, sizeof(txrc)); @@ -653,10 +651,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) /* set up RTS protection if desired */ if (len > tx->local->hw.wiphy->rts_threshold) { - txrc.rts = rts = true; + txrc.rts = true; } - info->control.use_rts = rts; + info->control.use_rts = txrc.rts; info->control.use_cts_prot = tx->sdata->vif.bss_conf.use_cts_prot; /* @@ -668,7 +666,9 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) if (tx->sdata->vif.bss_conf.use_short_preamble && (ieee80211_is_data(hdr->frame_control) || (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) - txrc.short_preamble = short_preamble = true; + txrc.short_preamble = true; + + info->control.short_preamble = txrc.short_preamble; if (tx->sta) assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); @@ -692,16 +692,38 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) */ rate_control_get_rate(tx->sdata, tx->sta, &txrc); - if (unlikely(info->control.rates[0].idx < 0)) - return TX_DROP; + if (tx->sta && !info->control.skip_table) + ratetbl = rcu_dereference(tx->sta->sta.rates); + + if (unlikely(info->control.rates[0].idx < 0)) { + if (ratetbl) { + struct ieee80211_tx_rate rate = { + .idx = ratetbl->rate[0].idx, + .flags = ratetbl->rate[0].flags, + .count = ratetbl->rate[0].count + }; + + if (ratetbl->rate[0].idx < 0) + return TX_DROP; + + tx->rate = rate; + } else { + return TX_DROP; + } + } else { + tx->rate = info->control.rates[0]; + } if (txrc.reported_rate.idx < 0) { - txrc.reported_rate = info->control.rates[0]; + txrc.reported_rate = tx->rate; if (tx->sta && ieee80211_is_data(hdr->frame_control)) tx->sta->last_tx_rate = txrc.reported_rate; } else if (tx->sta) tx->sta->last_tx_rate = txrc.reported_rate; + if (ratetbl) + return TX_CONTINUE; + if (unlikely(!info->control.rates[0].count)) info->control.rates[0].count = 1; @@ -709,102 +731,6 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) (info->flags & IEEE80211_TX_CTL_NO_ACK))) info->control.rates[0].count = 1; - if (is_multicast_ether_addr(hdr->addr1)) { - /* - * XXX: verify the rate is in the basic rateset - */ - return TX_CONTINUE; - } - - /* - * Set up the RTS/CTS rate as the fastest basic rate - * that is not faster than the data rate unless there - * is no basic rate slower than the data rate, in which - * case we pick the slowest basic rate - * - * XXX: Should this check all retry rates? - */ - if (!(info->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { - u32 basic_rates = tx->sdata->vif.bss_conf.basic_rates; - s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0; - - rate = &sband->bitrates[info->control.rates[0].idx]; - - for (i = 0; i < sband->n_bitrates; i++) { - /* must be a basic rate */ - if (!(basic_rates & BIT(i))) - continue; - /* must not be faster than the data rate */ - if (sband->bitrates[i].bitrate > rate->bitrate) - continue; - /* maximum */ - if (sband->bitrates[baserate].bitrate < - sband->bitrates[i].bitrate) - baserate = i; - } - - info->control.rts_cts_rate_idx = baserate; - } - - for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { - struct ieee80211_tx_rate *rc_rate = &info->control.rates[i]; - - /* - * make sure there's no valid rate following - * an invalid one, just in case drivers don't - * take the API seriously to stop at -1. - */ - if (inval) { - rc_rate->idx = -1; - continue; - } - if (rc_rate->idx < 0) { - inval = true; - continue; - } - - /* - * For now assume MCS is already set up correctly, this - * needs to be fixed. - */ - if (rc_rate->flags & IEEE80211_TX_RC_MCS) { - WARN_ON(rc_rate->idx > 76); - - if (!(rc_rate->flags & IEEE80211_TX_RC_USE_RTS_CTS) && - tx->sdata->vif.bss_conf.use_cts_prot) - rc_rate->flags |= - IEEE80211_TX_RC_USE_CTS_PROTECT; - continue; - } - - if (rc_rate->flags & IEEE80211_TX_RC_VHT_MCS) { - WARN_ON(ieee80211_rate_get_vht_mcs(rc_rate) > 9); - continue; - } - - /* set up RTS protection if desired */ - if (rts) - rc_rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; - - /* RC is busted */ - if (WARN_ON_ONCE(rc_rate->idx >= sband->n_bitrates)) { - rc_rate->idx = -1; - continue; - } - - rate = &sband->bitrates[rc_rate->idx]; - - /* set up short preamble */ - if (short_preamble && - rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) - rc_rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; - - /* set up G protection */ - if (!rts && tx->sdata->vif.bss_conf.use_cts_prot && - rate->flags & IEEE80211_RATE_ERP_G) - rc_rate->flags |= IEEE80211_TX_RC_USE_CTS_PROTECT; - } - return TX_CONTINUE; } -- cgit v1.2.3-70-g09d2 From a85666627b7f10c4229716b6ffaffcf196a128ca Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 22 Apr 2013 16:14:42 +0200 Subject: mac80211/minstrel_ht: use the new rate control API Pass the rate selection table to mac80211 from minstrel_ht_update_stats. Only rates for sample attempts are set in info->control.rates. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 150 ++++++++++++++++++++----------------- net/mac80211/rc80211_minstrel_ht.h | 2 + 2 files changed, 84 insertions(+), 68 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index a8e979e8f6b..5b2d3012b98 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -126,6 +126,9 @@ const struct mcs_group minstrel_mcs_groups[] = { static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES]; +static void +minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi); + /* * Look up an MCS group index based on mac80211 rate information */ @@ -465,7 +468,7 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_tx_rate *ar = info->status.rates; struct minstrel_rate_stats *rate, *rate2; struct minstrel_priv *mp = priv; - bool last; + bool last, update = false; int i; if (!msp->is_ht) @@ -514,21 +517,29 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, rate = minstrel_get_ratestats(mi, mi->max_tp_rate); if (rate->attempts > 30 && MINSTREL_FRAC(rate->success, rate->attempts) < - MINSTREL_FRAC(20, 100)) + MINSTREL_FRAC(20, 100)) { minstrel_downgrade_rate(mi, &mi->max_tp_rate, true); + update = true; + } rate2 = minstrel_get_ratestats(mi, mi->max_tp_rate2); if (rate2->attempts > 30 && MINSTREL_FRAC(rate2->success, rate2->attempts) < - MINSTREL_FRAC(20, 100)) + MINSTREL_FRAC(20, 100)) { minstrel_downgrade_rate(mi, &mi->max_tp_rate2, false); + update = true; + } if (time_after(jiffies, mi->stats_update + (mp->update_interval / 2 * HZ) / 1000)) { + update = true; minstrel_ht_update_stats(mp, mi); if (!(info->flags & IEEE80211_TX_CTL_AMPDU) && mi->max_prob_rate / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) minstrel_aggr_check(sta, skb); } + + if (update) + minstrel_ht_update_rates(mp, mi); } static void @@ -592,36 +603,71 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, static void minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, - struct ieee80211_tx_rate *rate, int index, - bool sample, bool rtscts) + struct ieee80211_sta_rates *ratetbl, int offset, int index) { const struct mcs_group *group = &minstrel_mcs_groups[index / MCS_GROUP_RATES]; struct minstrel_rate_stats *mr; + u8 idx; + u16 flags; mr = minstrel_get_ratestats(mi, index); if (!mr->retry_updated) minstrel_calc_retransmit(mp, mi, index); - if (sample) - rate->count = 1; - else if (mr->probability < MINSTREL_FRAC(20, 100)) - rate->count = 2; - else if (rtscts) - rate->count = mr->retry_count_rtscts; - else - rate->count = mr->retry_count; - - rate->flags = 0; - if (rtscts) - rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; + if (mr->probability < MINSTREL_FRAC(20, 100) || !mr->retry_count) { + ratetbl->rate[offset].count = 2; + ratetbl->rate[offset].count_rts = 2; + ratetbl->rate[offset].count_cts = 2; + } else { + ratetbl->rate[offset].count = mr->retry_count; + ratetbl->rate[offset].count_cts = mr->retry_count; + ratetbl->rate[offset].count_rts = mr->retry_count_rtscts; + } if (index / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) { - rate->idx = mp->cck_rates[index % ARRAY_SIZE(mp->cck_rates)]; + idx = mp->cck_rates[index % ARRAY_SIZE(mp->cck_rates)]; + flags = 0; + } else { + idx = index % MCS_GROUP_RATES + + (group->streams - 1) * MCS_GROUP_RATES; + flags = IEEE80211_TX_RC_MCS | group->flags; + } + + if (offset > 0) { + ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts; + flags |= IEEE80211_TX_RC_USE_RTS_CTS; + } + + ratetbl->rate[offset].idx = idx; + ratetbl->rate[offset].flags = flags; +} + +static void +minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) +{ + struct ieee80211_sta_rates *rates; + int i = 0; + + rates = kzalloc(sizeof(*rates), GFP_ATOMIC); + if (!rates) return; + + /* Start with max_tp_rate */ + minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate); + + if (mp->hw->max_rates >= 3) { + /* At least 3 tx rates supported, use max_tp_rate2 next */ + minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate2); + } + + if (mp->hw->max_rates >= 2) { + /* + * At least 2 tx rates supported, use max_prob_rate next */ + minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate); } - rate->flags |= IEEE80211_TX_RC_MCS | group->flags; - rate->idx = index % MCS_GROUP_RATES + (group->streams - 1) * MCS_GROUP_RATES; + rates->rate[i].idx = -1; + rate_control_set_rates(mp->hw, mi->sta, rates); } static inline int @@ -711,13 +757,13 @@ static void minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) { + const struct mcs_group *sample_group; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); - struct ieee80211_tx_rate *ar = info->status.rates; + struct ieee80211_tx_rate *rate = &info->status.rates[0]; struct minstrel_ht_sta_priv *msp = priv_sta; struct minstrel_ht_sta *mi = &msp->ht; struct minstrel_priv *mp = priv; int sample_idx; - bool sample = false; if (rate_control_send_low(sta, priv_sta, txrc)) return; @@ -745,51 +791,6 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, } #endif - if (sample_idx >= 0) { - sample = true; - minstrel_ht_set_rate(mp, mi, &ar[0], sample_idx, - true, false); - info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; - } else { - minstrel_ht_set_rate(mp, mi, &ar[0], mi->max_tp_rate, - false, false); - } - - if (mp->hw->max_rates >= 3) { - /* - * At least 3 tx rates supported, use - * sample_rate -> max_tp_rate -> max_prob_rate for sampling and - * max_tp_rate -> max_tp_rate2 -> max_prob_rate by default. - */ - if (sample_idx >= 0) - minstrel_ht_set_rate(mp, mi, &ar[1], mi->max_tp_rate, - false, false); - else - minstrel_ht_set_rate(mp, mi, &ar[1], mi->max_tp_rate2, - false, true); - - minstrel_ht_set_rate(mp, mi, &ar[2], mi->max_prob_rate, - false, !sample); - - ar[3].count = 0; - ar[3].idx = -1; - } else if (mp->hw->max_rates == 2) { - /* - * Only 2 tx rates supported, use - * sample_rate -> max_prob_rate for sampling and - * max_tp_rate -> max_prob_rate by default. - */ - minstrel_ht_set_rate(mp, mi, &ar[1], mi->max_prob_rate, - false, !sample); - - ar[2].count = 0; - ar[2].idx = -1; - } else { - /* Not using MRR, only use the first rate */ - ar[1].count = 0; - ar[1].idx = -1; - } - mi->total_packets++; /* wraparound */ @@ -797,6 +798,16 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, mi->total_packets = 0; mi->sample_packets = 0; } + + if (sample_idx < 0) + return; + + sample_group = &minstrel_mcs_groups[sample_idx / MCS_GROUP_RATES]; + info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; + rate->idx = sample_idx % MCS_GROUP_RATES + + (sample_group->streams - 1) * MCS_GROUP_RATES; + rate->flags = IEEE80211_TX_RC_MCS | sample_group->flags; + rate->count = 1; } static void @@ -846,6 +857,8 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, msp->is_ht = true; memset(mi, 0, sizeof(*mi)); + + mi->sta = sta; mi->stats_update = jiffies; ack_dur = ieee80211_frame_duration(sband->band, 10, 60, 1, 1); @@ -907,8 +920,9 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, if (!n_supported) goto use_legacy; - /* init {mi,mi->groups[*]}->{max_tp_rate,max_tp_rate2,max_prob_rate} */ + /* create an initial rate table with the lowest supported rates */ minstrel_ht_update_stats(mp, mi); + minstrel_ht_update_rates(mp, mi); return; diff --git a/net/mac80211/rc80211_minstrel_ht.h b/net/mac80211/rc80211_minstrel_ht.h index 9b16e9de992..d655586773a 100644 --- a/net/mac80211/rc80211_minstrel_ht.h +++ b/net/mac80211/rc80211_minstrel_ht.h @@ -65,6 +65,8 @@ struct minstrel_mcs_group_data { }; struct minstrel_ht_sta { + struct ieee80211_sta *sta; + /* ampdu length (average, per sampling interval) */ unsigned int ampdu_len; unsigned int ampdu_packets; -- cgit v1.2.3-70-g09d2 From 06d961a8e210035bff7e82f466107f9ab4a8fd94 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 22 Apr 2013 16:14:43 +0200 Subject: mac80211/minstrel: use the new rate control API Pass the rate selection table to mac80211 from minstrel_update_stats. Only rates for sample attempts are set in info->control.rates, with deferred sampling, only the second slot gets changed. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel.c | 200 ++++++++++++++++++++++------------------ net/mac80211/rc80211_minstrel.h | 2 + 2 files changed, 111 insertions(+), 91 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index eda290fb8bd..ac7ef5414bd 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -83,6 +83,50 @@ minstrel_sort_best_tp_rates(struct minstrel_sta_info *mi, int i, u8 *tp_list) tp_list[j] = i; } +static void +minstrel_set_rate(struct minstrel_sta_info *mi, struct ieee80211_sta_rates *ratetbl, + int offset, int idx) +{ + struct minstrel_rate *r = &mi->r[idx]; + + ratetbl->rate[offset].idx = r->rix; + ratetbl->rate[offset].count = r->adjusted_retry_count; + ratetbl->rate[offset].count_cts = r->retry_count_cts; + ratetbl->rate[offset].count_rts = r->retry_count_rtscts; +} + +static void +minstrel_update_rates(struct minstrel_priv *mp, struct minstrel_sta_info *mi) +{ + struct ieee80211_sta_rates *ratetbl; + int i = 0; + + ratetbl = kzalloc(sizeof(*ratetbl), GFP_ATOMIC); + if (!ratetbl) + return; + + /* Start with max_tp_rate */ + minstrel_set_rate(mi, ratetbl, i++, mi->max_tp_rate[0]); + + if (mp->hw->max_rates >= 3) { + /* At least 3 tx rates supported, use max_tp_rate2 next */ + minstrel_set_rate(mi, ratetbl, i++, mi->max_tp_rate[1]); + } + + if (mp->hw->max_rates >= 2) { + /* At least 2 tx rates supported, use max_prob_rate next */ + minstrel_set_rate(mi, ratetbl, i++, mi->max_prob_rate); + } + + /* Use lowest rate last */ + ratetbl->rate[i].idx = mi->lowest_rix; + ratetbl->rate[i].count = mp->max_retry; + ratetbl->rate[i].count_cts = mp->max_retry; + ratetbl->rate[i].count_rts = mp->max_retry; + + rate_control_set_rates(mp->hw, mi->sta, ratetbl); +} + static void minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi) { @@ -161,6 +205,8 @@ minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi) /* Reset update timer */ mi->stats_update = jiffies; + + minstrel_update_rates(mp, mi); } static void @@ -240,13 +286,12 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct minstrel_sta_info *mi = priv_sta; struct minstrel_priv *mp = priv; - struct ieee80211_tx_rate *ar = info->control.rates; - unsigned int ndx, sample_ndx = 0; + struct ieee80211_tx_rate *rate = &info->control.rates[0]; + struct minstrel_rate *msr, *mr; + unsigned int ndx; bool mrr_capable; - bool indirect_rate_sampling = false; - bool rate_sampling = false; - int i, delta; - int mrr_ndx[3]; + bool prev_sample = mi->prev_sample; + int delta; int sampling_ratio; /* management/no-ack frames do not use rate control */ @@ -262,107 +307,75 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta, else sampling_ratio = mp->lookaround_rate; - /* init rateindex [ndx] with max throughput rate */ - ndx = mi->max_tp_rate[0]; - /* increase sum packet counter */ mi->packet_count++; delta = (mi->packet_count * sampling_ratio / 100) - (mi->sample_count + mi->sample_deferred / 2); - /* delta > 0: sampling required */ - if ((delta > 0) && (mrr_capable || !mi->prev_sample)) { - struct minstrel_rate *msr; - if (mi->packet_count >= 10000) { - mi->sample_deferred = 0; - mi->sample_count = 0; - mi->packet_count = 0; - } else if (delta > mi->n_rates * 2) { - /* With multi-rate retry, not every planned sample - * attempt actually gets used, due to the way the retry - * chain is set up - [max_tp,sample,prob,lowest] for - * sample_rate < max_tp. - * - * If there's too much sampling backlog and the link - * starts getting worse, minstrel would start bursting - * out lots of sampling frames, which would result - * in a large throughput loss. */ - mi->sample_count += (delta - mi->n_rates * 2); - } + /* delta < 0: no sampling required */ + mi->prev_sample = false; + if (delta < 0 || (!mrr_capable && prev_sample)) + return; - /* get next random rate sample */ - sample_ndx = minstrel_get_next_sample(mi); - msr = &mi->r[sample_ndx]; - rate_sampling = true; - - /* Decide if direct ( 1st mrr stage) or indirect (2nd mrr stage) - * rate sampling method should be used. - * Respect such rates that are not sampled for 20 interations. - */ - if (mrr_capable && - msr->perfect_tx_time > mi->r[ndx].perfect_tx_time && - msr->sample_skipped < 20) - indirect_rate_sampling = true; - - if (!indirect_rate_sampling) { - if (msr->sample_limit != 0) { - ndx = sample_ndx; - mi->sample_count++; - if (msr->sample_limit > 0) - msr->sample_limit--; - } else - rate_sampling = false; - } else { - /* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark - * packets that have the sampling rate deferred to the - * second MRR stage. Increase the sample counter only - * if the deferred sample rate was actually used. - * Use the sample_deferred counter to make sure that - * the sampling is not done in large bursts */ - info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; - mi->sample_deferred++; - } + if (mi->packet_count >= 10000) { + mi->sample_deferred = 0; + mi->sample_count = 0; + mi->packet_count = 0; + } else if (delta > mi->n_rates * 2) { + /* With multi-rate retry, not every planned sample + * attempt actually gets used, due to the way the retry + * chain is set up - [max_tp,sample,prob,lowest] for + * sample_rate < max_tp. + * + * If there's too much sampling backlog and the link + * starts getting worse, minstrel would start bursting + * out lots of sampling frames, which would result + * in a large throughput loss. */ + mi->sample_count += (delta - mi->n_rates * 2); + } + + /* get next random rate sample */ + ndx = minstrel_get_next_sample(mi); + msr = &mi->r[ndx]; + mr = &mi->r[mi->max_tp_rate[0]]; + + /* Decide if direct ( 1st mrr stage) or indirect (2nd mrr stage) + * rate sampling method should be used. + * Respect such rates that are not sampled for 20 interations. + */ + if (mrr_capable && + msr->perfect_tx_time > mr->perfect_tx_time && + msr->sample_skipped < 20) { + /* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark + * packets that have the sampling rate deferred to the + * second MRR stage. Increase the sample counter only + * if the deferred sample rate was actually used. + * Use the sample_deferred counter to make sure that + * the sampling is not done in large bursts */ + info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; + rate++; + mi->sample_deferred++; + } else { + if (!msr->sample_limit != 0) + return; + + mi->sample_count++; + if (msr->sample_limit > 0) + msr->sample_limit--; } - mi->prev_sample = rate_sampling; /* If we're not using MRR and the sampling rate already * has a probability of >95%, we shouldn't be attempting * to use it, as this only wastes precious airtime */ - if (!mrr_capable && rate_sampling && + if (!mrr_capable && (mi->r[ndx].probability > MINSTREL_FRAC(95, 100))) - ndx = mi->max_tp_rate[0]; - - /* mrr setup for 1st stage */ - ar[0].idx = mi->r[ndx].rix; - ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info); - - /* non mrr setup for 2nd stage */ - if (!mrr_capable) { - if (!rate_sampling) - ar[0].count = mp->max_retry; - ar[1].idx = mi->lowest_rix; - ar[1].count = mp->max_retry; return; - } - /* mrr setup for 2nd stage */ - if (rate_sampling) { - if (indirect_rate_sampling) - mrr_ndx[0] = sample_ndx; - else - mrr_ndx[0] = mi->max_tp_rate[0]; - } else { - mrr_ndx[0] = mi->max_tp_rate[1]; - } + mi->prev_sample = true; - /* mrr setup for 3rd & 4th stage */ - mrr_ndx[1] = mi->max_prob_rate; - mrr_ndx[2] = 0; - for (i = 1; i < 4; i++) { - ar[i].idx = mi->r[mrr_ndx[i - 1]].rix; - ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count; - } + rate->idx = mi->r[ndx].rix; + rate->count = minstrel_get_retry_count(&mi->r[ndx], info); } @@ -412,12 +425,16 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband, unsigned int i, n = 0; unsigned int t_slot = 9; /* FIXME: get real slot time */ + mi->sta = sta; mi->lowest_rix = rate_lowest_index(sband, sta); ctl_rate = &sband->bitrates[mi->lowest_rix]; mi->sp_ack_dur = ieee80211_frame_duration(sband->band, 10, ctl_rate->bitrate, !!(ctl_rate->flags & IEEE80211_RATE_ERP_G), 1); + memset(mi->max_tp_rate, 0, sizeof(mi->max_tp_rate)); + mi->max_prob_rate = 0; + for (i = 0; i < sband->n_bitrates; i++) { struct minstrel_rate *mr = &mi->r[n]; unsigned int tx_time = 0, tx_time_cts = 0, tx_time_rtscts = 0; @@ -473,6 +490,7 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband, mi->stats_update = jiffies; init_sample_table(mi); + minstrel_update_rates(mp, mi); } static void * diff --git a/net/mac80211/rc80211_minstrel.h b/net/mac80211/rc80211_minstrel.h index b9f8535fa15..f4301f4b2e4 100644 --- a/net/mac80211/rc80211_minstrel.h +++ b/net/mac80211/rc80211_minstrel.h @@ -63,6 +63,8 @@ struct minstrel_rate { }; struct minstrel_sta_info { + struct ieee80211_sta *sta; + unsigned long stats_update; unsigned int sp_ack_dur; unsigned int rate_avg; -- cgit v1.2.3-70-g09d2